Revision 3:62a65ac86473, committed 2016-01-12

Comitter:

thorb3n

Date:

Tue Jan 12 17:02:25 2016 +0000

Parent:

2:0b023bf05e0d

Commit message:

fertig, pins angepasst,reihenfolge angepasst

Changed in this revision

--- a/main.cpp	Tue Jan 05 15:12:38 2016 +0000
+++ b/main.cpp	Tue Jan 12 17:02:25 2016 +0000
@@ -3,40 +3,29 @@
 #define IWDG_START 0x0000CCCC
 #define IWDG_WRITE_ACCESS 0x00005555
 #define IWDG_PR_PR_0 7
-#define IWDG_RELOAD 512*100
+#define IWDG_RELOAD 200000
 #define IWDG_REFRESH 0xAAAA
-Serial pc(USBTX, USBRX); // tx, rx
+DigitalOut vcc_funk(PB_8);                   // Pin vcc funk modul
+#define TRANSFER_SIZE   2
 
-nRF24L01P my_nrf24l01p(D4,D5,D3,D10,D8,D9);    // mosi, miso, sck, csn, ce, irq
 
 
 int main()
-{
-//                          
+{       
     //              pLATHALTER FÜR ANSHCALTEN ÜBER GPIO
         //
-        
-// The nRF24L01+ supports transfers from 1 to 32 bytes, but Sparkfun's
-//  "Nordic Serial Interface Board" (http://www.sparkfun.com/products/9019)
-//  only handles 4 byte transfers in the ATMega code.
-#define TRANSFER_SIZE   2
+    vcc_funk = 1;
+    wait_us(30);
+    nRF24L01P my_nrf24l01p(PB_5,PB_4,PB_3,PB_7,PD_2,PB_6);    // mosi, miso, sck, csn, ce, irq
 
-    char txData[TRANSFER_SIZE], rxData[TRANSFER_SIZE];
+    char txData[TRANSFER_SIZE];
     int txDataCnt = 0;
-    int rxDataCnt = 0;
 
     my_nrf24l01p.powerUp();
     my_nrf24l01p.setAirDataRate(250);
     my_nrf24l01p.setTxAddress(0xE7E7E7E7E1,5);
     my_nrf24l01p.setRxAddress(0xE7E7E7E7E7,5,0);
-    // Display the (default) setup of the nRF24L01+ chip
-    pc.printf( "nRF24L01+ Frequency    : %d MHz\r\n",  my_nrf24l01p.getRfFrequency() );
-    pc.printf( "nRF24L01+ Output power : %d dBm\r\n",  my_nrf24l01p.getRfOutputPower() );
-    pc.printf( "nRF24L01+ Data Rate    : %d kbps\r\n", my_nrf24l01p.getAirDataRate() );
-    pc.printf( "nRF24L01+ TX Address   : 0x%010llX\r\n", my_nrf24l01p.getTxAddress() );
-    pc.printf( "nRF24L01+ RX Address   : 0x%010llX\r\n", my_nrf24l01p.getRxAddress() );
-
-    pc.printf( "Type keys to test transfers:\r\n  (transfers are grouped into %d characters)\r\n", TRANSFER_SIZE );
+  
 
     my_nrf24l01p.setTransferSize( TRANSFER_SIZE );
 
@@ -50,50 +39,11 @@
     IWDG->PR=IWDG_PR_PR_0;
     IWDG->RLR=IWDG_RELOAD;
     while(IWDG->SR) {
-        wait(0.1);
+        wait_ms(1);
     }
     my_nrf24l01p.write( NRF24L01P_PIPE_P0, txData, txDataCnt );
-    wait(1);
     IWDG->KR=IWDG_REFRESH; /* (6) */
-    pc.printf("go to sleep");
     deepsleep();
     while (1) {
-
-        /*
-        // If we've received anything over the host serial link...
-        if ( pc.readable() ) {
-
-            // ...add it to the transmit buffer
-            txData[txDataCnt++] = pc.getc();
-
-            // If the transmit buffer is full
-            if ( txDataCnt >= sizeof( txData ) ) {
-
-                // Send the transmitbuffer via the nRF24L01+
-                my_nrf24l01p.write( NRF24L01P_PIPE_P0, txData, txDataCnt );
-
-                txDataCnt = 0;
-            }
-
-            // Toggle LED1 (to help debug Host -> nRF24L01+ communication)
-           // myled1 = !myled1;
-        }
-
-        // If we've received anything in the nRF24L01+...
-        if ( my_nrf24l01p.readable() ) {
-
-            // ...read the data into the receive buffer
-            rxDataCnt = my_nrf24l01p.read( NRF24L01P_PIPE_P0, rxData, sizeof( rxData ) );
-
-            // Display the receive buffer contents via the host serial link
-            for ( int i = 0; rxDataCnt > 0; rxDataCnt--, i++ ) {
-
-                pc.putc( rxData[i] );
-            }
-
-            // Toggle LED2 (to help debug nRF24L01+ -> Host communication)
-            //myled2 = !myled2;
-        }
-        */
     }
 }