File content as of revision 0:62bc11b5bc43:

/** \file max30105.h ******************************************************
*
* Project: MAXREFDES117#
* Filename: max30105.h
* Description: This module is an embedded controller driver header file for MAX30105
*
* ------------------------------------------------------------------------- */
/*******************************************************************************
* Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included
* in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
* IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
* OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
* Except as contained in this notice, the name of Maxim Integrated
* Products, Inc. shall not be used except as stated in the Maxim Integrated
* Products, Inc. Branding Policy.
*
* The mere transfer of this software does not imply any licenses
* of trade secrets, proprietary technology, copyrights, patents,
* trademarks, maskwork rights, or any other form of intellectual
* property whatsoever. Maxim Integrated Products, Inc. retains all
* ownership rights.
*******************************************************************************
*/
#ifndef _MAX30105_H_
#define _MAX30105_H_

#include "mbed.h"

#define MAX30105_NO_ERROR   0
#define MAX30105_ERROR      -1
#define MAX30105_TEMP_ERROR  -999.0

#define MAX30105_I2C_ADDR  0xAE
#define MAX30105_PART_ID  0x15

#define MAX30105_DEFAULT_LED_PA 0x20
#define MAX30105_DEFAULT_PILOT_PA 0x40

class MAX30105
{
public:

    /**
     * @brief   Register Addresses
     * @details Enumerated MAX30105 register addresses
     */
    enum registers_t {
        REG_INTR_STATUS_1 = 0x00,     ///< Interrupt Status 1
        REG_INTR_STATUS_2 = 0x01,     ///< Interrupt Status 2
        REG_INTR_ENABLE_1 = 0x02,     ///< Interrupt Enable 1
        REG_INTR_ENABLE_2 = 0x03,     ///< Interrupt Enable 2
        REG_FIFO_WR_PTR = 0x04,     ///< FIFO Write Pointer
        REG_OVF_COUNTER = 0x05,     ///< Overflow Counter
        REG_FIFO_RD_PTR = 0x06,     ///< FIFO Read Pointer
        REG_FIFO_DATA = 0x07,     ///< FIFO Data Register
        REG_FIFO_CONFIG = 0x08,     ///< FIFO Configuration
        REG_MODE_CONFIG = 0x09,     ///< Mode Configuration
        REG_SPO2_CONFIG = 0x0A,     ///< Sensing Configuration
        REG_RSVD_0B = 0x0B,     ///< Reserved 0x0B
        REG_LED1_PA = 0x0C,     ///< LED1 Pulse Amplitude
        REG_LED2_PA = 0x0D,     ///< LED2 Pulse Amplitude
        REG_LED3_PA = 0x0E,     ///< LED3 Pulse Amplitude
        REG_RSVD_0F = 0x0F,     ///< Reserved 0x0F
        REG_PILOT_PA = 0x10,     ///< Proximity Mode LED Pulse Amplitude
        REG_MULTI_LED_CTRL1 = 0x11,     ///< LED Slots 1 and 2
        REG_MULTI_LED_CTRL2 = 0x12,     ///< LED Slots 3 and 4
        REG_TEMP_INT = 0x1F,     ///< Die Temperature Ingteger
        REG_TEMP_FRAC = 0x20,     ///< Die Temperature Fraction
        REG_TEMP_CONFIG = 0x21,     ///< Die Temperature Configuration
        REG_PROX_INTR_THRESH = 0x30,     ///< Proximity Interrupt Threshold
        REG_REV_ID = 0xFE,     ///< Part Revision
        REG_PART_ID = 0xFF,     ///< Part ID Code
    };

    /**
     * @brief   Sample Averaging
     * @details Number of samples to be averaged and decimated
     */
    enum smp_ave_t {
        SMP_AVE_1 = (0 << 5), ///< 1 (no averaging)
        SMP_AVE_2 = (1 << 5), ///< 2
        SMP_AVE_4 = (2 << 5), ///< 4
        SMP_AVE_8 = (3 << 5), ///< 8
        SMP_AVE_16 = (4 << 5), ///< 16
        SMP_AVE_32 = (5 << 5), ///< 32
    };

    /**
     * @brief   FIFO Almost Full Value
     * @details Number of empty spaces that triggers FIFO_A_FULL interrupt
     */
    enum fifo_a_full_t {
        FIFO_A_FULL_0 = 0x0, ///< 0 samples remaining, 32 used
        FIFO_A_FULL_1 = 0x1, ///< 1 samples remaining, 31 used
        FIFO_A_FULL_2 = 0x2, ///< 2 samples remaining, 30 used
        FIFO_A_FULL_3 = 0x3, ///< 3 samples remaining, 29 used
        FIFO_A_FULL_4 = 0x4, ///< 4 samples remaining, 28 used
        FIFO_A_FULL_5 = 0x5, ///< 5 samples remaining, 27 used
        FIFO_A_FULL_6 = 0x6, ///< 6 samples remaining, 26 used
        FIFO_A_FULL_7 = 0x7, ///< 7 samples remaining, 25 used
        FIFO_A_FULL_8 = 0x8, ///< 8 samples remaining, 24 used
        FIFO_A_FULL_9 = 0x9, ///< 9 samples remaining, 23 used
        FIFO_A_FULL_A = 0xA, ///< 10 samples remaining, 22 used
        FIFO_A_FULL_B = 0xB, ///< 11 samples remaining, 21 used
        FIFO_A_FULL_C = 0xC, ///< 12 samples remaining, 20 used
        FIFO_A_FULL_D = 0xD, ///< 13 samples remaining, 19 used
        FIFO_A_FULL_E = 0xE, ///< 14 samples remaining, 18 used
        FIFO_A_FULL_F = 0xF, ///< 15 samples remaining, 17 used
    };

    /**
     * @brief   Mode Control
     * @details Operating mode
     */
    enum mode_t {
        MODE_1LED = 0x2, ///< Single Red LED mode
        MODE_2LED = 0x3, ///< Red and IR LED mode
        MODE_MULTI = 0x7, ///< Multi LED mode Red, IR, and/or Green
    };

    /**
     * @brief   ADC Range
     * @details Sets the full scale range of the ADC
     */
    enum adc_rge_t {
        ADC_RGE_00 = (0 << 5), ///< 2048nA full scale, 7.81pA LSB
        ADC_RGE_01 = (1 << 5), ///< 4096nA full scale, 15.63pA LSB
        ADC_RGE_10 = (2 << 5), ///< 8192nA full scale, 31.25pA LSB
        ADC_RGE_11 = (3 << 5), ///< 16384nA full scale, 62.5pA LSB
    };

    /**
     * @brief   Sample Rate
     * @details Sets the sample rate of the pulses for each enabled LED
     */
    enum smp_rt_t {
        SMP_RT_50 = (0 << 2), ///< 50 Samples per second
        SMP_RT_100 = (1 << 2), ///< 100 Samples per second
        SMP_RT_200 = (2 << 2), ///< 200 Samples per second
        SMP_RT_400 = (3 << 2), ///< 400 Samples per second
        SMP_RT_800 = (4 << 2), ///< 800 Samples per second
        SMP_RT_1000 = (5 << 2), ///< 1000 Samples per second
        SMP_RT_1600 = (6 << 2), ///< 1600 Samples per second
        SMP_RT_3200 = (7 << 2), ///< 3200 Samples per second
    };

    /**
     * @brief   Pulse Width
     * @details Sets the pulse width for the channel
     */
    enum led_pw_t {
        LED_PW_15BIT = 0, ///< 69us, 15 bit resolution
        LED_PW_16BIT = 1, ///< 118us, 16 bit resolution
        LED_PW_17BIT = 2, ///< 215us, 17 bit resolution
        LED_PW_18BIT = 3, ///< 411us, 18 bit resolution
    };

    /**
     * @brief   Slot Control
     * @details Sets the active LED and pulse amplitude for the slot
     */
    enum slot_t {
        SLOT_DISABLED = 0, ///< No LED active
        SLOT_RED_LED1 = 1, ///< Red, LED1_PA
        SLOT_IR_LED2 = 2, ///< IR, LED3_PA
        SLOT_GREEN_LED3 = 3, ///< Green, LED3_PA
        SLOT_NONE = 4, ///< No LED active
        SLOT_RED_PILOT = 5, ///< Red, PILOT_PA
        SLOT_IR_PILOT = 6, ///< IR, PILOT_PA
        SLOT_GREEN_PILOT = 7, ///< Green, PILOT_PA
    };

    static const char INTR_A_FULL = (1 <<7);
    static const char INTR_DATA_RDY = (1 <<6);
    static const char INTR_ALC_OVF = (1 <<5);
    static const char INTR_PROX = (1 <<4);
    static const char INTR_PWR_RDY = (1 <<0);
    static const char INTR_TEMP_RDY = (1 <<1);

    static const char MASK_SMP_AVE = (7 <<5);
    static const char MASK_FIFO_ROLLOVER_EN = (1 <<4);
    static const char MASK_FIFO_A_FULL = (0xF <<0);

    static const char MASK_SHDN = (1 <<7);
    static const char MASK_RESET = (1 <<6);
    static const char MASK_MODE = (7 <<0);

    static const char MASK_ADC_RGE = (3 <<5);
    static const char MASK_SMP_RT = (7 <<2);
    static const char MASK_LED_PW = (3 <<0);

    static const char MASK_SLOT2 = (7 <<4);
    static const char MASK_SLOT1 = (7 <<0);
    static const char MASK_SLOT4 = (7 <<4);
    static const char MASK_SLOT3 = (7 <<0);

    /**
        * MAX30105 constructor.
        *
        * @param i2c I2C object to use.
        */
    MAX30105(I2C &i2c);

    /**
        * MAX30105 destructor.
        */
    ~MAX30105();

    /**
     * @brief   Get Interrupt 1
     * @details Reads Interrupt 1
     * @returns contents of REG_INTR_STATUS_1, or -1 if error.
    */
    int getIntr1();

    /**
     * @brief   Get Interrupt 2
     * @details Reads Temp Interrupt
     * @returns contents of REG_INTR_STATUS_2, or -1 if error.
    */
    int getIntr2();

    /**
     * @brief   Enable Interrupt
     * @details Enables any interrupt whos bit is set
     * @param   intrBits bit mask of interrupts to enable
     * @returns 0 if no errors, -1 if error.
    */
    int enableIntr(char intrBits);

    /**
     * @brief   Disable Interrupt
     * @details Disables any interrupt whos bit is set
     * @param   intrBits bit mask of interrupts to disable
     * @returns 0 if no errors, -1 if error.
    */
    int disableIntr(char intrBits);

    /**
     * @brief   Configure Proximity Function
     * @details Sets amplitude and threshold for proximity detector
     *          Set threshold to 0x00 to disable proximity detecotr
     * @param   proxAmp The amplitude of the proximity pulse 50mA/255 steps
     * @param   proxThresh The detect threshold to start sensing
     * @returns 0 if no errors, -1 if error.
    */
    int setProx(char proxAmp, char proxThresh);

    /**
     * @brief   Configure Single LED Mode
     * @details Configures part for single LED mode.
     * @param   smpAve number of samples to average
     * @param   fifoRollOver enables FIFO to roll over when full
     * @param   fifoAFull sets FIFO almost full level
     * @param   adcRange sets ADC range
     * @param   smpRate sets sample rate
     * @param   ledPW sets LED pulse width
     * @param   led1PA sets pulse amplitude for LED1
     * @returns 0 if no errors, -1 if error.
    */
    int setSingleLED(smp_ave_t smpAve = SMP_AVE_1,
                     bool fifoRollOver = false,
                     fifo_a_full_t fifoAFull = FIFO_A_FULL_F,
                     adc_rge_t adcRange = ADC_RGE_01,
                     smp_rt_t smpRate = SMP_RT_100,
                     led_pw_t ledPW = LED_PW_18BIT,
                     char led1PA = MAX30105_DEFAULT_LED_PA);

    /**
     * @brief   Configure Dual LED Mode
     * @details Configures part for dual LED mode.
     * @param   smpAve number of samples to average
     * @param   fifoRollOver enables FIFO to roll over when full
     * @param   fifoAFull sets FIFO almost full level
     * @param   adcRange sets ADC range
     * @param   smpRate sets sample rate
     * @param   ledPW sets LED pulse width
     * @param   led1PA sets pulse amplitude for LED1
     * @param   led2PA sets pulse amplitude for LED2
     * @returns 0 if no errors, -1 if error.
    */
    int setDualLED(smp_ave_t smpAve = SMP_AVE_1,
                   bool fifoRollOver = false,
                   fifo_a_full_t fifoAFull = FIFO_A_FULL_F,
                   adc_rge_t adcRange = ADC_RGE_01,
                   smp_rt_t smpRate = SMP_RT_100,
                   led_pw_t ledPW = LED_PW_18BIT,
                   char led1PA = MAX30105_DEFAULT_LED_PA,
                   char led2PA = MAX30105_DEFAULT_LED_PA);

    /**
     * @brief   Configure Multi LED Mode
     * @details Configures part for multi LED mode.
     * @param   smpAve number of samples to average
     * @param   fifoRollOver enables FIFO to roll over when full
     * @param   fifoAFull sets FIFO almost full level
     * @param   adcRange sets ADC range
     * @param   smpRate sets sample rate
     * @param   ledPW sets LED pulse width
     * @param   led1PA sets pulse amplitude for LED1
     * @param   led2PA sets pulse amplitude for LED2
     * @param   led3PA sets pulse amplitude for LED3
     * @param   pilotPA sets pulse amplitude for pilot
     * @param   slot1 assigns LED and amplitude to slot 1
     * @param   slot2 assigns LED and amplitude to slot 2
     * @param   slot3 assigns LED and amplitude to slot 3
     * @param   slot4 assigns LED and amplitude to slot 4
     * @returns 0 if no errors, -1 if error.
    */
    int setMultiLED(smp_ave_t smpAve = SMP_AVE_1,
                    bool fifoRollOver = false,
                    fifo_a_full_t fifoAFull = FIFO_A_FULL_F,
                    adc_rge_t adcRange = ADC_RGE_01,
                    smp_rt_t smpRate = SMP_RT_100,
                    led_pw_t ledPW = LED_PW_18BIT,
                    char led1PA = MAX30105_DEFAULT_LED_PA,
                    char led2PA = MAX30105_DEFAULT_LED_PA,
                    char led3PA = MAX30105_DEFAULT_LED_PA,
                    char pilotPA = MAX30105_DEFAULT_PILOT_PA,
                    slot_t slot1 = SLOT_RED_LED1,
                    slot_t slot2 = SLOT_IR_LED2,
                    slot_t slot3 = SLOT_GREEN_LED3,
                    slot_t slot4 = SLOT_DISABLED);


    /**
     * @brief   Initialize MAX30105
     * @details Intializes settings for the MAX30105
     * @returns 0 if no errors, -1 if error.
    */
    int init();

    /**
     * @brief   Read FIFOs
     * @details Reads from the red and IR FIFOs
     * @param   redLED Pointer for where to store red LED data
     * @param   irLED Pointer for where to store IR LED data
     * @returns 0 if no errors, -1 if error.
    */
    int readFIFO(uint32_t *redLED, uint32_t *irLED);

    /**
     * @brief   Read Temperature
     * @details Read the die temperature of the MAX30105
     * @returns Temperature in degrees C, or -999.0 if error
    */
    float readTemperature();

    /**
     * @brief   Reset MAX30105
     * @details Resets regsisters to their power on defaults
     * @returns 0 if no errors, -1 if error.
    */
    int softReset();

    /**
     * @brief   Shutdown MAX30105
     * @details Puts MAX30105 in power-save mode, retaining regsiter settings
     * @returns 0 if no errors, -1 if error.
    */
    int shutDown();

    /**
     * @brief   Wake Up MAX30105
     * @details Wakes MAX30105 from power-save mode
     * @returns 0 if no errors, -1 if error.
    */
    int wakeUp();

    /**
     * @brief   Write Register
     * @details Writes the given value to the specified register.
     * @param   reg The register to be written
     * @param   value The data to be written
     * @returns 0 if no errors, -1 if error.
    */
    int writeReg(registers_t reg, char value);

    /**
     * @brief   Read Register
     * @details Reads from the specified register
     * @param   reg The register to be read
     * @param   value Pointer for where to store the data
     * @returns 0 if no errors, -1 if error.
    */
    int readReg(registers_t reg, char *value);

private:
    // Internal Resources
    I2C _i2c;

    // Configuration Register Cache
    char _interruptEnable1;
    char _interruptEnable2;
    char _fifoConfiguration;
    char _modeConfiguration;
    char _spo2Configuration;
    char _led1PulseAmplitude;
    char _led2PulseAmplitude;
    char _led3PulseAmplitude;
    char _pilotPulseAmplitude;
    char _multiLedControl1;
    char _multiLedControl2;
    char _proxIntThreshold;
};

#endif /* _MAX30105_H_ */