Modified library to add delay after releasing reset. This is needed because the reset signal is enabling an LDO to provide power to the display and it needs time to turn on.

Fork of Adafruit_GFX by Neal Horman

Revision:
4:853097cfa773
Parent:
0:c3dcd4c4983a
Child:
5:315de3647c9f
--- a/Adafruit_SSD1306.cpp	Wed Jan 23 02:43:38 2013 +0000
+++ b/Adafruit_SSD1306.cpp	Tue Apr 29 19:27:01 2014 +0000
@@ -115,12 +115,22 @@
     // turn on VCC (9V?)
     
 #if defined SSD1306_128_32
-    // Init sequence for 128x32 OLED module
+    uint8_t setmultiplex = 0x1F;
+    uint8_t setcompins = 0x02;
+    uint8_t setcontrast = 0x8F;
+#elif defined SSD1306_128_64
+    uint8_t setmultiplex = 0x3F;
+    uint8_t setcompins = 0x12;
+    uint8_t setcontrast = (vccstate == SSD1306_EXTERNALVCC) ? 0x9F : 0xCF;
+#else
+#error "Display dimensions must be defined"
+#endif
+
     ssd1306_command(SSD1306_DISPLAYOFF);                    // 0xAE
     ssd1306_command(SSD1306_SETDISPLAYCLOCKDIV);            // 0xD5
     ssd1306_command(0x80);                                  // the suggested ratio 0x80
     ssd1306_command(SSD1306_SETMULTIPLEX);                  // 0xA8
-    ssd1306_command(0x1F);
+    ssd1306_command(setmultiplex);
     ssd1306_command(SSD1306_SETDISPLAYOFFSET);              // 0xD3
     ssd1306_command(0x0);                                   // no offset
     ssd1306_command(SSD1306_SETSTARTLINE | 0x0);            // line #0
@@ -134,9 +144,9 @@
     ssd1306_command(SSD1306_SEGREMAP | 0x1);
     ssd1306_command(SSD1306_COMSCANDEC);
     ssd1306_command(SSD1306_SETCOMPINS);                    // 0xDA
-    ssd1306_command(0x02);
+    ssd1306_command(setcompins);
     ssd1306_command(SSD1306_SETCONTRAST);                   // 0x81
-    ssd1306_command(0x8F);
+    ssd1306_command(setcontrast);
     ssd1306_command(SSD1306_SETPRECHARGE);                  // 0xd9
     if (vccstate == SSD1306_EXTERNALVCC) 
     { ssd1306_command(0x22); }
@@ -146,44 +156,6 @@
     ssd1306_command(0x40);
     ssd1306_command(SSD1306_DISPLAYALLON_RESUME);           // 0xA4
     ssd1306_command(SSD1306_NORMALDISPLAY);                 // 0xA6
-#endif
-    
-#if defined SSD1306_128_64
-    // Init sequence for 128x64 OLED module
-    ssd1306_command(SSD1306_DISPLAYOFF);                    // 0xAE
-    ssd1306_command(SSD1306_SETDISPLAYCLOCKDIV);            // 0xD5
-    ssd1306_command(0x80);                                  // the suggested ratio 0x80
-    ssd1306_command(SSD1306_SETMULTIPLEX);                  // 0xA8
-    ssd1306_command(0x3F);
-    ssd1306_command(SSD1306_SETDISPLAYOFFSET);              // 0xD3
-    ssd1306_command(0x0);                                   // no offset
-    ssd1306_command(SSD1306_SETSTARTLINE | 0x0);            // line #0
-    ssd1306_command(SSD1306_CHARGEPUMP);                    // 0x8D
-    if (vccstate == SSD1306_EXTERNALVCC) 
-    { ssd1306_command(0x10); }
-    else 
-    { ssd1306_command(0x14); }
-    ssd1306_command(SSD1306_MEMORYMODE);                    // 0x20
-    ssd1306_command(0x00);                                  // 0x0 act like ks0108
-    ssd1306_command(SSD1306_SEGREMAP | 0x1);
-    ssd1306_command(SSD1306_COMSCANDEC);
-    ssd1306_command(SSD1306_SETCOMPINS);                    // 0xDA
-    ssd1306_command(0x12);
-    ssd1306_command(SSD1306_SETCONTRAST);                   // 0x81
-    if (vccstate == SSD1306_EXTERNALVCC) 
-    { ssd1306_command(0x9F); }
-    else 
-    { ssd1306_command(0xCF); }
-    ssd1306_command(SSD1306_SETPRECHARGE);                  // 0xd9
-    if (vccstate == SSD1306_EXTERNALVCC) 
-    { ssd1306_command(0x22); }
-    else 
-    { ssd1306_command(0xF1); }
-    ssd1306_command(SSD1306_SETVCOMDETECT);                 // 0xDB
-    ssd1306_command(0x40);
-    ssd1306_command(SSD1306_DISPLAYALLON_RESUME);           // 0xA4
-    ssd1306_command(SSD1306_NORMALDISPLAY);                 // 0xA6
-#endif
     
     ssd1306_command(SSD1306_DISPLAYON);//--turn on oled panel
 }