Satoru Yoshida / Mbed 2 deprecated IBMIoTSimpleClient

It can be run only with mbed LPC1768, LAN socket and DHT11 sensor. mbed application board is not needed.

Dependencies:   DHT11 EthernetInterface MQTT mbed-rtos mbed

Fork of IBMIoTClientEthernetExample by IBM Watson IoT

Example Photo /media/uploads/strysd/simpleiot.png

- 水魚堂さんの回路図エディタ BSch3V を利用して作成しました。回路図データ /media/uploads/strysd/simpleiot.ce3

- DHT11 は、masahiro's electronic lab さんで配布されている部品ライブラリを利用しました。http://www.eleclabo.com/denshi/doc/bschlib.html

/media/uploads/strysd/simpleiot_jittai_1.jpg

/media/uploads/strysd/simpleiot_jittai_2.jpg

/media/uploads/strysd/simpleiot_jittai_3.jpg

LPC1768.h

Committer:
strysd
Date:
2016-10-15
Revision:
20:d8387eff818d
Parent:
8:80d49dd91542

File content as of revision 20:d8387eff818d:

/*******************************************************************************
 * Copyright (c) 2014 IBM Corp.
 *
 * All rights reserved. This program and the accompanying materials
 * are made available under the terms of the Eclipse Public License v1.0
 * and Eclipse Distribution License v1.0 which accompany this distribution.
 *
 * The Eclipse Public License is available at
 *    http://www.eclipse.org/legal/epl-v10.html
 * and the Eclipse Distribution License is available at
 *   http://www.eclipse.org/org/documents/edl-v10.php.
 *
 * Contributors:
 *    Ian Craggs - initial implementation
 *    Sam Grove  - added mehtod to check the status of the Ethernet cable
 *******************************************************************************
 * Forked by Satoru Yoshida 2016/Oct 
 *    Removed support for mbed application board, this program can run only 
 *    set of mbed LPC1768, LAN socket and DHT11 sensor 
 *******************************************************************************/

#if !defined(LPC1768_H)
#define LPC1768_H

#include "DHT11.h"

DigitalOut led2(LED2);

#define LED2_OFF 0
#define LED2_ON 1

DHT11 dht(p18);

#define DEFAULT_TYPE_NAME "iotsample-mbed-lpc1768"

#include "lpc_phy.h"
// need a wrapper since K64F and LPC1768 wont have the same name for mii read methods
static uint32_t linkStatus(void)
{
    return (lpc_mii_read_data() & 1);
}

#endif