Steven Osborn
Basic RX/TX example, this is the firmware that LoDev S76S comes with initially.
Dependencies: mbed SX1276RonothLib
LoDev RX/TX Example
Transmit
By default LoDev comes on in receive mode. To switch to transmit mode, connect PC2 to 3.3v and press the reset switch. In TX mode the blue LED is normally off and blinks on briefly when transmitting.
Receive
When in RX mode the LED is normally on and turns off briefly when receiving a packet. This is the default mode.
Revision 3:80e4a46e676c, committed 2019-07-15
- Comitter:
- steve918
- Date:
- Mon Jul 15 22:07:41 2019 +0000
- Parent:
- 2:a93ffb29a2d2
- Commit message:
- update readme;
Changed in this revision
| README.md | Show annotated file Show diff for this revision Revisions of this file |
diff -r a93ffb29a2d2 -r 80e4a46e676c README.md --- a/README.md Mon Jul 15 22:05:34 2019 +0000 +++ b/README.md Mon Jul 15 22:07:41 2019 +0000 @@ -7,3 +7,7 @@ By default the device is in RX mode. ***To enable TX mode connect PC2 to 3v3** and reset the device via reset button. +In TX mode the blue LED is normally off and blinks on briefly when transmitting. +Receive When in RX mode the LED is normally on and turns off briefly when +receiving a packet. This is the default mode. +