Paul Staron / Mbed 2 deprecated ESP8266-configuaration-baudrate

ESP8266 set up for AT version 1.7.0

Dependencies:   mbed

Use this to set and test the ESP8266.

For ESP8266 firmware v1.7.0 and v1.7.1

restore.. resets the ESP8266 to factory settings with baud rate 115200 this is MBED-OS default setting.

config.. use this if you want to set ssid, password and mode in the ESP8266 flash.

setbaud.. set the ESP8266 baud rate that will stored in ESP8266 flash.

Most platforms will work up to 460800 baud, 921600 works on platforms with a MCU clock speed of 100MHz and above. MBED-OS built in ESP8266 driver only works up to 460800 at time of writing but is considerably faster than the default 115200 .

In most cases use 'restore' and 'setbaud' to reset the ESP8266 back to factory settings with your required baud rate.

main.cpp@3:14e33fec26c3, 2015-02-10 (annotated)

Committer:
star297
Date:
Tue Feb 10 17:14:53 2015 +0000
Revision:
3:14e33fec26c3
Parent:
2:c5515c7eba46
Child:
4:cd4543cf2f9c
added status

Who changed what in which revision?

UserRevisionLine numberNew contents of line
star297 0:5ebf44bd3694 1 #include "mbed.h"
star297 0:5ebf44bd3694 2
star297 0:5ebf44bd3694 3 Serial pc(USBTX, USBRX);
star297 0:5ebf44bd3694 4 Serial esp(PTE0, PTE1); // tx, rx
star297 0:5ebf44bd3694 5
star297 0:5ebf44bd3694 6 Timer t;
star297 0:5ebf44bd3694 7
star297 0:5ebf44bd3694 8 int count,ended,timeout;
star297 0:5ebf44bd3694 9 char buf[1024];
star297 0:5ebf44bd3694 10 char snd[255];
star297 0:5ebf44bd3694 11
star297 2:c5515c7eba46 12 char ssid[32] = "ssid"; // enter router ssid inside the quotes
star297 2:c5515c7eba46 13 char pwd [32] = "password"; // enter router password inside the quotes
star297 0:5ebf44bd3694 14
star297 0:5ebf44bd3694 15 void SendCMD(),getreply(),ESPconfig(),ESPsetbaudrate();
star297 0:5ebf44bd3694 16
star297 0:5ebf44bd3694 17
star297 0:5ebf44bd3694 18 int main() {
star297 0:5ebf44bd3694 19
star297 2:c5515c7eba46 20 pc.baud(115200); // set what you want here depending on your terminal program speed
star297 2:c5515c7eba46 21 esp.baud(9600); // change this to the new ESP8266 baudrate if it is changed at any time.
star297 0:5ebf44bd3694 22
star297 0:5ebf44bd3694 23 //ESPsetbaudrate(); //****************** include this routine to set a different ESP8266 baudrate ******************
star297 0:5ebf44bd3694 24
star297 0:5ebf44bd3694 25 ESPconfig(); //****************** include Config to set the ESP8266 configuration ***********************
star297 3:14e33fec26c3 26
star297 3:14e33fec26c3 27
star297 3:14e33fec26c3 28 // contiuosly get AP list and IP
star297 3:14e33fec26c3 29 while(1){
star297 3:14e33fec26c3 30 pc.printf("\n---------- Listing Acces Points ----------\r\n");
star297 3:14e33fec26c3 31 strcpy(snd, "AT+CWLAP\r\n");
star297 3:14e33fec26c3 32 SendCMD();
star297 3:14e33fec26c3 33 timeout=3;
star297 3:14e33fec26c3 34 getreply();
star297 3:14e33fec26c3 35 pc.printf(buf);
star297 3:14e33fec26c3 36
star297 3:14e33fec26c3 37 pc.printf("\n---------- Get IP's ----------\r\n");
star297 3:14e33fec26c3 38 strcpy(snd, "AT+CIFSR\r\n");
star297 3:14e33fec26c3 39 SendCMD();
star297 3:14e33fec26c3 40 timeout=2;
star297 3:14e33fec26c3 41 getreply();
star297 3:14e33fec26c3 42 pc.printf(buf);
star297 3:14e33fec26c3 43 }
star297 0:5ebf44bd3694 44
star297 0:5ebf44bd3694 45 }
star297 0:5ebf44bd3694 46
star297 0:5ebf44bd3694 47 // Sets new ESP8266 baurate, change the esp.baud(xxxxx) to match your new setting once this has been executed
star297 0:5ebf44bd3694 48 void ESPsetbaudrate()
star297 0:5ebf44bd3694 49 {
star297 0:5ebf44bd3694 50 strcpy(snd, "AT+CIOBAUD=115200\r\n"); // change the numeric value to the required baudrate
star297 0:5ebf44bd3694 51 SendCMD();
star297 0:5ebf44bd3694 52 }
star297 0:5ebf44bd3694 53
star297 0:5ebf44bd3694 54 // +++++++++++++++++++++++++++++++++ This is for ESP8266 config only, run this once to set up the ESP8266 +++++++++++++++
star297 0:5ebf44bd3694 55 void ESPconfig()
star297 0:5ebf44bd3694 56 {
star297 0:5ebf44bd3694 57
star297 0:5ebf44bd3694 58 pc.printf("---------- Starting ESP Config ----------\r\n\n");
star297 0:5ebf44bd3694 59 wait(2);
star297 0:5ebf44bd3694 60 pc.printf("---------- Reset & get Firmware ----------\r\n");
star297 0:5ebf44bd3694 61 strcpy(snd,"AT+RST\r\n");
star297 0:5ebf44bd3694 62 SendCMD();
star297 0:5ebf44bd3694 63 timeout=2;
star297 0:5ebf44bd3694 64 getreply();
star297 0:5ebf44bd3694 65 pc.printf(buf);
star297 0:5ebf44bd3694 66
star297 2:c5515c7eba46 67 wait(1);
star297 0:5ebf44bd3694 68
star297 0:5ebf44bd3694 69 pc.printf("\n---------- Get Version ----------\r\n");
star297 0:5ebf44bd3694 70 strcpy(snd,"AT+GMR\r\n");
star297 0:5ebf44bd3694 71 SendCMD();
star297 0:5ebf44bd3694 72 timeout=1;
star297 0:5ebf44bd3694 73 getreply();
star297 2:c5515c7eba46 74 pc.printf(buf);
star297 0:5ebf44bd3694 75
star297 2:c5515c7eba46 76 wait(1);
star297 2:c5515c7eba46 77
star297 0:5ebf44bd3694 78 // set CWMODE to 1=Station,2=AP,3=BOTH, default mode 1 (Station)
star297 0:5ebf44bd3694 79 pc.printf("\n---------- Setting Mode ----------\r\n");
star297 0:5ebf44bd3694 80 strcpy(snd, "AT+CWMODE=1\r\n");
star297 0:5ebf44bd3694 81 SendCMD();
star297 0:5ebf44bd3694 82 timeout=1;
star297 0:5ebf44bd3694 83 getreply();
star297 0:5ebf44bd3694 84 pc.printf(buf);
star297 0:5ebf44bd3694 85
star297 0:5ebf44bd3694 86 wait(1);
star297 0:5ebf44bd3694 87
star297 2:c5515c7eba46 88 // set CIPMUX to 0=Single,1=Multi
star297 2:c5515c7eba46 89 pc.printf("\n---------- Setting Connection Mode ----------\r\n");
star297 2:c5515c7eba46 90 strcpy(snd, "AT+CIPMUX=1\r\n");
star297 2:c5515c7eba46 91 SendCMD();
star297 2:c5515c7eba46 92 timeout=1;
star297 2:c5515c7eba46 93 getreply();
star297 2:c5515c7eba46 94 pc.printf(buf);
star297 2:c5515c7eba46 95
star297 2:c5515c7eba46 96 wait(1);
star297 2:c5515c7eba46 97
star297 0:5ebf44bd3694 98 pc.printf("\n---------- Listing Acces Points ----------\r\n");
star297 0:5ebf44bd3694 99 strcpy(snd, "AT+CWLAP\r\n");
star297 0:5ebf44bd3694 100 SendCMD();
star297 0:5ebf44bd3694 101 timeout=3;
star297 0:5ebf44bd3694 102 getreply();
star297 0:5ebf44bd3694 103 pc.printf(buf);
star297 0:5ebf44bd3694 104
star297 0:5ebf44bd3694 105 wait(1);
star297 0:5ebf44bd3694 106
star297 0:5ebf44bd3694 107 pc.printf("\n---------- Connecting to AP ----------\r\n");
star297 0:5ebf44bd3694 108 pc.printf("ssid = %s pwd = %s\r\n",ssid,pwd);
star297 0:5ebf44bd3694 109 strcpy(snd, "AT+CWJAP=\"");
star297 0:5ebf44bd3694 110 strcat(snd, ssid);
star297 0:5ebf44bd3694 111 strcat(snd, "\",\"");
star297 0:5ebf44bd3694 112 strcat(snd, pwd);
star297 0:5ebf44bd3694 113 strcat(snd, "\"\r\n");
star297 0:5ebf44bd3694 114 SendCMD();
star297 0:5ebf44bd3694 115 timeout=8;
star297 0:5ebf44bd3694 116 getreply();
star297 0:5ebf44bd3694 117 pc.printf(buf);
star297 0:5ebf44bd3694 118
star297 0:5ebf44bd3694 119 wait(5);
star297 0:5ebf44bd3694 120
star297 0:5ebf44bd3694 121 pc.printf("\n---------- Get IP's ----------\r\n");
star297 0:5ebf44bd3694 122 strcpy(snd, "AT+CIFSR\r\n");
star297 0:5ebf44bd3694 123 SendCMD();
star297 0:5ebf44bd3694 124 timeout=2;
star297 0:5ebf44bd3694 125 getreply();
star297 0:5ebf44bd3694 126 pc.printf(buf);
star297 0:5ebf44bd3694 127
star297 3:14e33fec26c3 128 wait(1);
star297 3:14e33fec26c3 129
star297 3:14e33fec26c3 130 pc.printf("\n---------- Get Connection Status ----------\r\n");
star297 3:14e33fec26c3 131 strcpy(snd, "AT+CIPSTATUS\r\n");
star297 3:14e33fec26c3 132 SendCMD();
star297 3:14e33fec26c3 133 timeout=2;
star297 3:14e33fec26c3 134 getreply();
star297 3:14e33fec26c3 135 pc.printf(buf);
star297 3:14e33fec26c3 136
star297 0:5ebf44bd3694 137 pc.printf("\n\n\n If you get a valid IP, ESP8266 has been set up.\r\n");
star297 0:5ebf44bd3694 138 pc.printf(" Run this if you want to reconfig the ESP8266 at any time.\r\n");
star297 0:5ebf44bd3694 139 }
star297 0:5ebf44bd3694 140
star297 0:5ebf44bd3694 141 void SendCMD()
star297 0:5ebf44bd3694 142 {
star297 0:5ebf44bd3694 143 esp.printf("%s", snd);
star297 0:5ebf44bd3694 144 }
star297 0:5ebf44bd3694 145
star297 0:5ebf44bd3694 146 void getreply()
star297 0:5ebf44bd3694 147 {
star297 0:5ebf44bd3694 148 memset(buf, '\0', sizeof(buf));
star297 0:5ebf44bd3694 149 t.start();
star297 0:5ebf44bd3694 150 ended=0;count=0;
star297 0:5ebf44bd3694 151 while(!ended) {
star297 0:5ebf44bd3694 152 if(esp.readable()) {
star297 0:5ebf44bd3694 153 buf[count] = esp.getc();count++;
star297 0:5ebf44bd3694 154 }
star297 0:5ebf44bd3694 155 if(t.read() > timeout) {
star297 0:5ebf44bd3694 156 ended = 1;t.stop();t.reset();
star297 0:5ebf44bd3694 157 }
star297 0:5ebf44bd3694 158 }
star297 0:5ebf44bd3694 159 }
star297 0:5ebf44bd3694 160