Paul Staron
Demo program for the Oled display
Diff: main.cpp
- Revision:
- 1:793dbd6d6498
- Parent:
- 0:94bf5ec759da
- Child:
- 2:1eac3ea8c6e8
--- a/main.cpp Thu Jan 08 12:05:23 2015 +0000
+++ b/main.cpp Fri Jan 09 00:11:48 2015 +0000
@@ -1,53 +1,675 @@
#include "mbed.h"
#include "OLED32028P1T.h"
-/*
- This display requires 5v, 200mA power supply, serial and reset connections are 3.3v - 5v.
- Set Oled to any serial port. It is Target dependant, some platforms may not work at
- higher baud rates. Set baud rates as per the list in .cpp file, NOT in the program.
- Freescale KLxx MCU's will only work upt to 128k baud and some have been defined.
-*/
+
+OLED32028P1T oled(PTE0,PTE1,PTA12); // Oled Display tx, rx, rs
+InterruptIn SignalIn(PTC1); // conection of output NON-inverting DCF module
+DigitalOut SignalLED(LED3); // indicates DCF signal on Mbed
+
+Timer T1,T2,T3;
+Ticker Ticker50ms; // DCF IRQ timer
+
+#define clkx 110 //this point represent the x center of the clock where maths is done
+#define clky 138 //this point represent the y center of the clock where maths is done
+
+char timebuf[40];
+char datebuf[40];
+char paritycheck,paritym,parityu,paritydmy;
+char testu,testm,testdmy,summertime;
+char min,minh,minl,hourh,hourl,day,dayh,dayl,monthh,monthl,yearh,yearl;
+char weekDayName[7][4] = {"Sun","Mon","Tue","Wed","Thu", "Fri","Sat"};
+char monthName[12][4] = {"Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"};
+char MAX_DAY[12] = {31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; // Max days in a month for a non-leap year
+char statusText[6][20] = {"Waiting Synchronise"," Wait for 21st bit ","Reading Signal data"," Checking Parity "," Last Minute Okay "," Signal error "};
+char leapSymbol[2][10] = {" ", "Leap Year"};
-OLED32028P1T oled(PTB17,PTB16,PTC0); // Oled Display TX, RX, RESET
+int hour,minute,second,dayofweek,dayofmonth,month,year,nextsec,DCF;
+int RTCsecond,RTCminute,RTChour,RTCdayofweek,RTCdayofmonth,RTCmonth,RTCyear;
+int xbuffer,ybuffer,IRQ;
+int xs,ys,xm,ym,xh,yh,x,y;
+int handHour=60,handMin=75,handSec=78; //RTC clock hand sizes
+int numposx=105,numposy=135; // RTC clock number screen posistion
+
+int start,sync,SignalStatus,nosignal,laststart,loop,interrupt_counter,dcf_sec,error_count;
+int tz,rtcset,rtcset_times;
+int r=255,g=255,b=255;
+int draw_graph,dcf_good,signal_error,dcf_error,display;
+int p_minute,p_hour,p_dayofweek,p_dayofmonth,p_month,p_year;
+int dcf_array[61];
+
+float angleH,angleM,angleS;
+float fsecond,fminute;
+
+typedef unsigned char byte;
+
+struct tm t;
+
+void RTCsetclock(),RTCset(),RTCread(),RTCclock(),RTCclockdraw(),RTCclockupdate();
+void dcfISR(),dcfIRQ(),checkSIGNAL(),signal(),DCFbitprint();
+void DCFclock(),DCFloop(),DCFshowClock(),DCFtestparity();
+void DCFcheck(),bitprint(),DCFdrawgraph();
+void DCFbitmapdraw(),DCFparitycalc(),DCFbitstatus(),DCFbitstatus2();
+void DCFsetTime();
-char timebuffer[50];
-char datebuffer[50];
+struct SignalStatus {
+ bool is_leap; // Leap year flag (NOT actually transmitted but calculated)
+ bool DCFsample50; // dcf sample at 50mS into the start of the second, seocnd marker pulse
+ bool DCFsample150; // dcf sample at 150mS into the start of the second, bit=1 if high, 0 if low
+ bool DCFsample300; // dcf sample at 300mS into the start of the second, error if high
+ bool DCFsample500; // dcf sample at 500mS into the start of the second, error if high
+ bool DCFsample600; // dcf sample at 600mS into the start of the second, error if high
+ unsigned char frame; // Received MSF framing code 01111110
+ int second; // MSF-DCF second (NOT actually transmitted but calculated)
+} dcf_status;
+
+
+// Return the maximum day in month for a given month & year
+byte maxDay(byte year, byte month)
+{
+ byte lastday, leap;
+ leap = year%4 == 0 && year%100 !=0 || year%400 == 0;
+ lastday = MAX_DAY[month - 1];
+ dcf_status.is_leap = leap > 0 ? 1 : 0;
+ if ((leap > 0) && (month == 2))
+ lastday++;
+ return lastday;
+}
-int main() {
-
- oled.init(); // initialise the display. This will start at 9600 baud then auto set
- // to the higher baud rate as set in the .cpp file
- // This can be called at any time in the program to restart the display
- // if required, display power down for instance.
+int main() {
+
+ SignalLED=1;
+ oled.init();
+ oled.clear();
+ oled.setTextBackgroundType(TEXT_OPAQUE);
+ oled.setFontSize(FONT12X16);oled.setFontColor(oled.toRGB(255,255,0));
+ oled.setFontColor(oled.toRGB(255,255,0));
+ oled.drawText(2,0,(FONT12X16),"--drawText vs. printf--",oled.toRGB(255,0,255));
+ oled.drawText(2,22,(FONT5X7),"Use drawText as much as possible, it's nearly twice",oled.toRGB(255,255,255));
+ oled.drawText(2,23,(FONT5X7),"as fast as printf. Make sure the serial stream is",oled.toRGB(255,255,255));
+ oled.drawText(2,24,(FONT5X7),"NOT",oled.toRGB(255,0,0));
+ oled.drawText(6,24,(FONT5X7),"interrupted when printing.",oled.toRGB(255,255,255));
+ if (time(NULL) < 1396310400) {set_time(1396310400);}
+ T3.start();
- oled.clear();
- oled.setTextBackgroundType(TEXT_OPAQUE);
- oled.setFontColor(WHITE); // some predefined colours
+ while(T3<10){
+ oled.setFontColor(oled.toRGB(0,255,255));
+ oled.locate (12,18);
+ oled.printf("Next page in %2.1f seconds ",10 - T3.read());
+
+ time_t seconds = time(NULL);
+ strftime(timebuf, 32, "RTC %I:%M:%S %p", localtime(&seconds));
+ strftime(datebuf, 32, "%a %d %b %Y ", localtime(&seconds));
+
+ T1.start();
+ oled.drawText(2,2,(FONT12X16),timebuf,oled.toRGB(255,255,0));
+ oled.drawText(2,3,(FONT12X16),datebuf,oled.toRGB(255,255,0));
+ T1.stop();
+
+ T2.start();
+ oled.setFontColor(oled.toRGB(0,255,0));
+ oled.setFontSize(FONT12X16);
+ oled.locate (2,6);
+ oled.printf("%s",timebuf);
+ oled.locate (2,7);
+ oled.printf("%s",datebuf);
+ T2.stop();
- oled.drawText(1,1,(FONT12X16)," --RTC Clock Time-- ",oled.toRGB(255,255,255));
- oled.setFontSize(FONT12X16);
- oled.setFontColor(oled.toRGB(255,255,0));
+ oled.setFontColor(oled.toRGB(255,255,255));
+ oled.setFontSize(FONT8X12);
+ oled.locate (4,6);
+ oled.printf("drawText time %3.2f mS",T1.read()*1000);T1.reset();
+ oled.locate (4,11);
+ oled.printf("printf time %3.2f mS",T2.read()*1000);T2.reset();
+ }
+ T3.reset();
+ while(1){
+ IRQ=0;
+ SignalLED=1;
+ RTCclock();
+ }
+
+ }
+
+void RTCclock()
+{
+ while(IRQ==0){
+ oled.disableTouch();oled.clear();
+ oled.setTextBackgroundType (TEXT_TRANSPARENT);
+ RTCclockdraw();
+ oled.drawTextButton(1, 200, 210,(oled.toRGB(0,100,100)),(FONT12X16),(oled.toRGB(255,255,255)), 1, 1, "DCF Clock");
+ oled.drawTextButton(1, 252, 185,(oled.toRGB(0,100,100)),(FONT8X12),(oled.toRGB(255,255,255)), 1, 1, "Set RTC");
+ oled.setTextBackgroundType (TEXT_OPAQUE);
+ oled.drawText(0,0,(FONT12X16),"RTC Clock",oled.toRGB(255,0,0));
+ oled.enableTouch();oled.resetTouchArea();
+
+ while(IRQ==0){
+ oled.setFontSize(FONT12X16);oled.locate(0,1);
+ oled.setFontColor(oled.toRGB(255,255,255));
+ time_t seconds = time(NULL);
+ strftime(timebuf, 32, "%I:%M:%S %p", localtime(&seconds));
+ strftime(datebuf, 32, "%a %d %b %Y ", localtime(&seconds));
+ oled.drawText(11,0,(FONT12X16),timebuf,oled.toRGB(255,255,0));
+ oled.drawText(11,1,(FONT12X16),datebuf,oled.toRGB(255,255,0));
+
+ if (seconds != nextsec) {RTCclockupdate();nextsec=seconds;}
+ oled.getTouch(&xbuffer,&ybuffer);
+
+ oled.setFontSize(FONT5X7);oled.locate(40,6); // this shows touch position
+ oled.printf("X %03d Y %03d ",xbuffer,ybuffer); // and can be removed
+
+ if((xbuffer>195 && xbuffer<300) && (ybuffer>205 && ybuffer<220)){DCFclock();}
+ if((xbuffer>240 && xbuffer<300) && (ybuffer>182 && ybuffer<200)){RTCsetclock();}
+ }
+ }
+ }
+
+void RTCclockdraw()
+{
+ (x)=0;
+ while ((x)<60){
+ x++;angleS=(x)*6; // clock minute markers in angle form
+ xs=(sin((angleS*3.14)/180)) * 90; // X component of markers
+ ys=(cos((angleS*3.14)/180)) * 90; // Y component of markers
+ oled.drawLine(clkx,clky,clkx+xs,clky-ys,oled.toRGB(255,255,255));
+ }
+ (x)=0;
+ while ((x)<13){
+ x++;angleS=(x)*30; // clock hour markers in angle form
+ xs=(sin((angleS*3.14)/180)) * 90; // X component of markers
+ ys=(cos((angleS*3.14)/180)) * 90; // Y component of markers
+ oled.drawLine(clkx,clky,clkx+xs,clky-ys,oled.toRGB(0,255,255));
+ if (x==1) oled.drawTextGraphic(numposx +(xs+8),numposy + (ys+8), FONT5X7, "5", 1, 1, oled.toRGB(255,255,255));
+ if (x==2) oled.drawTextGraphic(numposx +(xs+10),numposy + (ys+4), FONT5X7, "4", 1, 1, oled.toRGB(255,255,255));
+ if (x==3) oled.drawTextGraphic(numposx +(xs+10),numposy + (ys), FONT5X7, "3", 1, 1, oled.toRGB(255,255,255));
+ if (x==4) oled.drawTextGraphic(numposx +(xs+10),numposy + (ys-4), FONT5X7, "2", 1, 1, oled.toRGB(255,255,255));
+ if (x==5) oled.drawTextGraphic(numposx +(xs+8),numposy + (ys-8), FONT5X7, "1", 1, 1, oled.toRGB(255,255,255));
+ if (x==6) oled.drawTextGraphic(numposx +(xs),numposy + (ys-8), FONT5X7, "12", 1, 1, oled.toRGB(255,255,255));
+ if (x==7) oled.drawTextGraphic(numposx +(xs-4),numposy + (ys-8), FONT5X7, "11", 1, 1, oled.toRGB(255,255,255));
+ if (x==8) oled.drawTextGraphic(numposx +(xs-10),numposy + (ys-4), FONT5X7, "10", 1, 1, oled.toRGB(255,255,255));
+ if (x==9) oled.drawTextGraphic(numposx +(xs-4),numposy + (ys), FONT5X7, "9", 1, 1, oled.toRGB(255,255,255));
+ if (x==10) oled.drawTextGraphic(numposx +(xs-4),numposy + (ys+4), FONT5X7, "8", 1, 1, oled.toRGB(255,255,255));
+ if (x==11) oled.drawTextGraphic(numposx +(xs),numposy + (ys+8), FONT5X7, "7", 1, 1, oled.toRGB(255,255,255));
+ if (x==12) oled.drawTextGraphic(numposx +(xs+3),numposy + (ys+8), FONT5X7, "6", 1, 1, oled.toRGB(255,255,255));
+ }
+ oled.setPenSize(0);
+ oled.drawCircle(clkx,clky,80,oled.toRGB(0,0,0));
+ oled.setPenSize(1);
+ oled.drawCircle(clkx,clky,80,oled.toRGB(255,255,255));
+ oled.drawCircle(clkx,clky,90,oled.toRGB(255,255,255));
+ (x)=0;
+}
+
+void RTCsetclock()
+{
+ oled.disableTouch();oled.clear();
+ oled.drawText(0,0,(FONT12X16)," --Manual set RTC Time--",oled.toRGB(0,255,0));
+ oled.setTextBackgroundType (TEXT_TRANSPARENT);
+ oled.drawTextButton(1, 265, 200,(oled.toRGB(0,100,100)),(FONT5X7),(oled.toRGB(255,255,255)), 1, 1, " Back ");
+ oled.drawTextButton(1, 10, 200,(oled.toRGB(0,100,100)),(FONT8X12),(oled.toRGB(255,255,255)), 1, 1, " Reset RTC ");
+ oled.drawTextButton(1, 120, 200,(oled.toRGB(0,100,100)),(FONT8X12),(oled.toRGB(255,255,255)), 1, 1, " Set RTC ");
+ oled.drawTextButton(1, 16, 115,(oled.toRGB(0,100,100)),(FONT8X12),(oled.toRGB(255,255,255)), 1, 1, "+");
+ oled.drawTextButton(1, 16, 140,(oled.toRGB(0,100,100)),(FONT8X12),(oled.toRGB(255,255,255)), 1, 1, "-");
+ oled.drawTextButton(1, 52, 115,(oled.toRGB(0,100,100)),(FONT8X12),(oled.toRGB(255,255,255)), 1, 1, "+");
+ oled.drawTextButton(1, 52, 140,(oled.toRGB(0,100,100)),(FONT8X12),(oled.toRGB(255,255,255)), 1, 1, "-");
+ oled.drawTextButton(1, 88, 115,(oled.toRGB(0,100,100)),(FONT8X12),(oled.toRGB(255,255,255)), 1, 1, "+");
+ oled.drawTextButton(1, 88, 140,(oled.toRGB(0,100,100)),(FONT8X12),(oled.toRGB(255,255,255)), 1, 1, "-");
+
+ oled.drawTextButton(1, 174, 115,(oled.toRGB(0,100,100)),(FONT8X12),(oled.toRGB(255,255,255)), 1, 1, "+");
+ oled.drawTextButton(1, 174, 140,(oled.toRGB(0,100,100)),(FONT8X12),(oled.toRGB(255,255,255)), 1, 1, "-");
+ oled.drawTextButton(1, 208, 115,(oled.toRGB(0,100,100)),(FONT8X12),(oled.toRGB(255,255,255)), 1, 1, " + ");
+ oled.drawTextButton(1, 208, 140,(oled.toRGB(0,100,100)),(FONT8X12),(oled.toRGB(255,255,255)), 1, 1, " - ");
+ oled.drawTextButton(1, 270, 115,(oled.toRGB(0,100,100)),(FONT8X12),(oled.toRGB(255,255,255)), 1, 1, " + ");
+ oled.drawTextButton(1, 270, 140,(oled.toRGB(0,100,100)),(FONT8X12),(oled.toRGB(255,255,255)), 1, 1, " - ");
+ oled.setTextBackgroundType (TEXT_OPAQUE);
+ RTCread();
+ second=RTCsecond;minute=RTCminute;hour=RTChour;dayofweek=RTCdayofweek;dayofmonth=RTCdayofmonth;month=RTCmonth;year=RTCyear;
+
+ while(IRQ==0){
+
+ oled.enableTouch();
+ time_t seconds = time(NULL);
+ strftime(timebuf, 32, "%H:%M:%S", localtime(&seconds));
+ strftime(datebuf, 32, "%a %d %b' %Y", localtime(&seconds));
+ oled.drawText(0,2,(FONT12X16),timebuf,oled.toRGB(255,255,255));
+ oled.drawText(10,2,(FONT12X16),datebuf,oled.toRGB(255,255,255));
+
+ oled.getTouch(&xbuffer,&ybuffer);
+ if((xbuffer>240 && xbuffer<290) && (ybuffer>190 && ybuffer<210)){RTCclock();}
+ if((xbuffer>20 && xbuffer<109) && (ybuffer>190 && ybuffer<210)){set_time(1396310400);}
+ if((xbuffer>120 && xbuffer<195) && (ybuffer>195 && ybuffer<210)){RTCset();RTCread();
+ second=RTCsecond;minute=RTCminute;hour=RTChour;dayofweek=RTCdayofweek;dayofmonth=RTCdayofmonth;month=RTCmonth;year=RTCyear;
+ }
+
+ if((xbuffer>25 && xbuffer<40) && (ybuffer>124 && ybuffer<140)){hour++;}
+ if((xbuffer>25 && xbuffer<40) && (ybuffer>146 && ybuffer<160)){hour--;}
+ if((xbuffer>58 && xbuffer<74) && (ybuffer>124 && ybuffer<140)){minute++;}
+ if((xbuffer>58 && xbuffer<74) && (ybuffer>146 && ybuffer<160)){minute--;}
+ if((xbuffer>90 && xbuffer<105) && (ybuffer>124 && ybuffer<140)){second++;}
+ if((xbuffer>90 && xbuffer<105) && (ybuffer>146 && ybuffer<160)){second--;}
+ if((xbuffer>170 && xbuffer<186) && (ybuffer>124 && ybuffer<140)){dayofmonth++;}
+ if((xbuffer>170 && xbuffer<186) && (ybuffer>146 && ybuffer<160)){dayofmonth--;}
+ if((xbuffer>200 && xbuffer<230) && (ybuffer>124 && ybuffer<140)){month++;}
+ if((xbuffer>200 && xbuffer<230) && (ybuffer>146 && ybuffer<160)){month--;}
+ if((xbuffer>258 && xbuffer<288) && (ybuffer>124 && ybuffer<140)){year++;}
+ if((xbuffer>258 && xbuffer<288) && (ybuffer>146 && ybuffer<160)){year--;}
+ oled.disableTouch();
+
+ if (second >= 60) {second = 0;}
+ if (second < 0) {second = 59;}
+ if (minute >= 60) {minute = 0;}
+ if (minute < 0) {minute = 59;}
+ if (hour >= 24) {hour = 0;}
+ if (hour < 0) {hour = 23;}
+ if (dayofweek > 6){dayofweek = 0;}
+ if (dayofweek < 0){dayofweek = 6;}
+ if (month > 12) {month = 1;}
+ if (month < 1) {month = 12;}
+ if (dayofmonth <1) {dayofmonth = maxDay(year, month);}
+ if (dayofmonth > maxDay(year, month)) {dayofmonth = 1;}
+ if (year > 99) {year = 1;}
+ if (year < 0) {year = 99;}
+
+
+ oled.setFontSize(FONT12X16);oled.locate(1,6);
+ oled.setFontColor(oled.toRGB(60,255,255));
+ oled.printf("%2d:%02d:%02d ",hour,minute,second);
+ oled.printf("%s %02d %s' 20%02d",weekDayName[dayofweek],dayofmonth,monthName[month-1],year);
+ }
- while(1){
-
- time_t seconds = time(NULL);
-
- strftime(timebuffer, 32, "RTC %I:%M:%S %p", localtime(&seconds));
- strftime(datebuffer, 32, "%a %d %b %Y ", localtime(&seconds));
-
- oled.drawText(2,3,(FONT12X16),timebuffer,oled.toRGB(255,255,0)); // print using drawText is faster
- oled.drawText(2,4,(FONT12X16),datebuffer,oled.toRGB(255,128,0));
+}
+void RTCclockupdate()
+{
+ RTCread();
+ fsecond = (RTCsecond/12);
+ fminute = (RTCminute/12);
+ if (x==1){ //Erase all hands
+ oled.drawLine(clkx,clky,clkx+xs,clky-ys,oled.toRGB(0,0,0)); // Erase Second's hand
+ oled.drawLine(clkx,clky,clkx+xm,clky-ym,oled.toRGB(0,0,0)); // Erase Minute's hand
+ oled.drawLine(clkx,clky,clkx+xh,clky-yh,oled.toRGB(0,0,0)); // Erase Hour's hand
+ }
+ //Calculations to get the second point of the clock hands. (first point is always the center of the clock)
+ angleS=(RTCsecond*6); //seconds in angle form, 360 degrees divided by 60 seconds = 6, x6 to get current angle
+ xs=(sin((angleS*3.14)/180)) * handSec; //get X component of the second's hand
+ ys=(cos((angleS*3.14)/180)) * handSec; //get Y component of the second's hand
+ angleM=((RTCminute*6) + fsecond); //minutes in angle form, 360 degrees divided by 60 minutes = 6, add seconds fraction, x6 to get current angle
+ xm=(sin((angleM*3.14)/180)) * handMin; //get X component of the minutes's hand
+ ym=(cos((angleM*3.14)/180)) * handMin; //get Y component of the minutes's hand
+ angleH=(((RTChour*5) + (fminute))*6); //hours in angle form, 360 degrees multiply hours by 5 hours = 60, add minute fraction, x6 to get angle
+ xh=(sin((angleH*3.14)/180)) * handHour; //get X component of the hours's hand
+ yh=(cos((angleH*3.14)/180)) * handHour; //get Y component of the hours's hand
+ x=1;
+ //Draw current time hands
+ oled.drawLine(clkx,clky,clkx+xm,clky-ym,oled.toRGB(255,255,255));
+ oled.drawLine(clkx,clky,clkx+xh,clky-yh,oled.toRGB(0,255,255));
+ oled.drawLine(clkx,clky,clkx+xs,clky-ys,oled.toRGB(255,255,0));
+ oled.setPenSize(0);
+ oled.drawCircle(clkx,clky,5,oled.toRGB(255,255,255)); // Draw the center of the second's hand
+}
+
+void RTCread()
+{
+ time_t seconds = time(NULL);
+ char buffer[80];
+ strftime(buffer, 2,"%S", localtime(&seconds));
+ RTCsecond = atoi(buffer);
+ strftime(buffer, 2,"%M", localtime(&seconds));
+ RTCminute = atoi(buffer);
+ strftime(buffer, 2,"%H", localtime(&seconds));
+ RTChour = atoi(buffer);
+ strftime(buffer, 2,"%d", localtime(&seconds));
+ RTCdayofmonth = atoi(buffer);
+ strftime(buffer, 2,"%w", localtime(&seconds));
+ RTCdayofweek = atoi(buffer);
+ strftime(buffer, 2,"%m", localtime(&seconds));
+ RTCmonth = atoi(buffer);
+ strftime(buffer, 2,"%y", localtime(&seconds));
+ RTCyear = atoi(buffer);
+}
+
+void RTCset()
+{
+ t.tm_sec = (second); // 0-59
+ t.tm_min = (minute); // 0-59
+ t.tm_hour = (hour); // 0-23
+ t.tm_mday = (dayofmonth); // 1-31
+ t.tm_mon = (month-1); // 0-11 DCF "0" = Jan, -1 added for Mbed RCT clock format
+ t.tm_year = ((year)+100); // year since 1900, current DCF year + 100 + 1900 = correct year
+ if (DCF==1) {set_time(mktime(&t)-3600);} // set RTC clock to DCF -1 hour for GMT time zone
+ else {set_time(mktime(&t));} // set RTC clock to local time zone
+ DCF=0;
+}
+
+// **************************** DCF clock **********************************************
+
+void DCFclock()
+{
+ oled.clear();DCFbitmapdraw();RTCread();
+ second=RTCsecond;minute=RTCminute;hour=RTChour;dayofweek=RTCdayofweek;dayofmonth=RTCdayofmonth;month=RTCmonth;year=RTCyear;
+ if(tz==0) {oled.drawText(0,0,(FONT8X12)," RTC Clock Time (GMT)",oled.toRGB(255,0,0));}
+ if (tz==1) {oled.drawText(0,0,(FONT8X12)," RTC Clock Time (CET)",oled.toRGB(255,0,0));}
+ if (tz==2) {oled.drawText(0,0,(FONT8X12)," RTC Clock Time (EET)",oled.toRGB(255,0,0));}
+ if (tz==3) {oled.drawText(0,0,(FONT8X12)," RTC Clock Time (MSK)",oled.toRGB(255,0,0));}
+ oled.drawText(22,5,(FONT8X12)," DCF Time (CET)",oled.toRGB(255,255,0));
+ oled.setTextBackgroundType (TEXT_TRANSPARENT);
+ oled.drawTextButton(1, 270, 140,(oled.toRGB(0,100,100)),(FONT5X7),(oled.toRGB(255,255,255)), 1, 1, " Back ");
+ oled.setTextBackgroundType (TEXT_OPAQUE);
+ draw_graph=0;DCFdrawgraph();
+ oled.drawLine(155,190,169,190, oled.toRGB(225, 255, 255));
+ oled.drawLine(169,190,169,203, oled.toRGB(225, 255, 255));
+ oled.drawLine(170,203,287,203, oled.toRGB(255,255,255));
+ oled.drawLine(287,190,287,203, oled.toRGB(225, 255, 255));
+ oled.drawLine(288,190,305,190, oled.toRGB(225, 255, 255));
+ oled.drawText(0,26,(FONT5X7)," 0 start min hour Dt dy mon year 60",oled.toRGB(255,0,0));
+ oled.setTouchArea(240,140,290,160);
+ start=0;sync=0;x=0;y=5;r=0;SignalStatus=0;laststart=2;loop=0;interrupt_counter = 0;dcf_sec=0;error_count=0;
+
+ Ticker50ms.attach(& dcfISR, .05);
+
+ while (IRQ==0) {
+ if (loop==0) {
+ DCFloop(); // Continuously get dcf time and Display data every second interrupted by the Ticker every 50ms
+ loop=1;}
+ }
+ oled.clear();
+}
+
+void DCFloop()
+{
+ if (interrupt_counter == 0) {
+ if (start == 0) {dcf_sec=0;}
+ if (dcf_sec == 0){dcf_array[58] = 0;}
+ if (dcf_good==1 && dcf_sec==2) {DCF=1;RTCset();}
+ }
+
+ if (interrupt_counter == 1) {
+ oled.setFontSize(FONT12X16);
+ oled.locate(15,5);oled.setFontColor(oled.toRGB(255,255,255));
+ oled.printf("%02d:%02d:%02d", hour, minute, second);
+ oled.locate(3,13);oled.setFontColor(oled.toRGB(255,255,255));
+ oled.setFontSize(FONT12X16);oled.printf("%02d",dcf_sec);
+ }
+
+ if (interrupt_counter==2){
+ if (rtcset==0) {
+ oled.drawText(33,2,(FONT5X7),"RTC -- un-set -- ",oled.toRGB(255,0,0));}
+ if (rtcset==1) {
+ oled.drawText(33,2,(FONT5X7),"RTC *** set *** ",oled.toRGB(0,255,0));}
+ oled.setFontSize(FONT12X16);oled.locate(0,1);
+ oled.setFontColor(oled.toRGB(255,255,255));
+ RTCread();
+ oled.printf("%2d:%02d:%02d",RTChour,RTCminute,RTCsecond);
+ }
+
+ if (interrupt_counter == 4) {
+ if (dcf_sec > 59) {dcf_sec = 0;}
+ if (dcf_sec>20 && signal_error==1) {DCFbitmapdraw();DCFdrawgraph();start=0;signal_error=0;SignalStatus=5;}
+ if (dcf_sec == 57) {oled.drawText(36,7,(FONT8X12)," ",oled.toRGB(0,0,0));}
+ if (start == 0 && signal_error==0) {SignalStatus=0;}
+ }
+
+ if (interrupt_counter == 6 && dcf_sec > 0){
+ if (dcf_sec==1){DCFdrawgraph();SignalStatus = 1;}
+ oled.setPenSize(1); oled.drawRectangle(11, 229, (dcf_sec*5), 8, oled.toRGB(0,255,0));draw_graph=0;
+ if (signal_error==1) {DCFdrawgraph();signal_error=0;SignalStatus=5;}
+ }
+
+ if (interrupt_counter == 7){
+ DCFbitstatus();
+ if (dcf_sec == 21){SignalStatus=2;r = !r;}
+ if (dcf_sec > 20 && dcf_sec < 59 ) {DCFbitprint();}
+ }
+
+ if (interrupt_counter == 8){
+ if (start==1){dcf_array[dcf_sec]=dcf_status.DCFsample150;}
+ oled.setFontSize(FONT12X16);oled.locate(0,2);
+ oled.setFontColor(oled.toRGB(255,255,255));
+ oled.printf("%s %02d %s' 20%02d",weekDayName[RTCdayofweek],RTCdayofmonth,monthName[RTCmonth-1],RTCyear);
+ }
+
+ if (interrupt_counter == 10) {
+ oled.setFontSize(FONT8X12);oled.locate(23,8);oled.setFontColor(oled.toRGB(255,255,255));
+ oled.printf("%s %02d %s' 20%02d", weekDayName[dayofweek], dayofmonth, monthName[month-1], year);
+ if (summertime) oled.drawText(23,9,(FONT8X12),"Summer Time",oled.toRGB(255,128,0));
+ else oled.drawText(23,9,(FONT8X12),"Winter Time",oled.toRGB(0,255,255));
+ oled.drawText(23,10,(FONT8X12),leapSymbol[dcf_status.is_leap],oled.toRGB(0,255,160));
+ }
+
+ if (interrupt_counter == 11 & second == 1) {
+ oled.setFontSize(FONT5X7);oled.locate(34,5);
+ oled.setFontColor(oled.toRGB(255,255,255));
+ oled.printf("RTC set x %d", rtcset_times);
+ }
+
+ if (interrupt_counter == 12){
+ if (SignalStatus==0) {oled.drawText(26,20,(FONT5X7),statusText[SignalStatus],oled.toRGB(255,255,255));}
+ if (SignalStatus==1) {oled.drawText(26,20,(FONT5X7),statusText[SignalStatus],oled.toRGB(255,255,0));}
+ if (SignalStatus==2) {oled.drawText(26,20,(FONT5X7),statusText[SignalStatus],oled.toRGB(0,255,255));}
+ if (SignalStatus==3) {oled.drawText(26,20,(FONT5X7),statusText[SignalStatus],oled.toRGB(0,0,255));}
+ if (SignalStatus==4) {oled.drawText(26,20,(FONT5X7),statusText[SignalStatus],oled.toRGB(0,255,0));}
+ if (SignalStatus==5) {
+ oled.drawText(26,20,(FONT5X7),statusText[SignalStatus],oled.toRGB(255,0,0));
+ oled.drawText(36,7,(FONT8X12)," ",oled.toRGB(0,0,0));
+ start=0;SignalStatus=0;sync=0;
+ }
+ }
+
+ if (interrupt_counter==13){
+ if (start==0 && laststart != start) {oled.drawText(26,18,(FONT5X7),("No Sync"),oled.toRGB(255,0,0));laststart=start;}
+ if (start==1 && laststart != start) {oled.drawText(26,18,(FONT5X7),("In Sync"),oled.toRGB(0,255,0));laststart=start;}
+ }
- oled.locate(3,6); // print start posistion x,y in characters (not pixels)
- oled.setFontSize(FONT12X16); // Font size
-
- oled.setFontColor(oled.toRGB(255,255,255)); // 'R' 'G' 'B' can be set for upto 16 million colurs
- oled.printf(timebuffer); // print using printf is slower than drawText
+ if (interrupt_counter>13){
+ oled.getTouch(&xbuffer,&ybuffer);
+ if (display==0){
+ if((xbuffer>2 && xbuffer<318) && (ybuffer>2 && ybuffer<238)){
+ oled.displayControl(0x01,0x01);display=1;
+ oled.resetTouchArea();}}
+ if((xbuffer>240 && xbuffer<290) && (ybuffer>140 && ybuffer<160)){
+ SignalIn.rise(NULL);Ticker50ms.detach();IRQ=1;}
+ }
+
+ if (interrupt_counter == 19){DCFbitstatus();}
+
+}
+
+void DCFtestparity()
+{
+ rtcset=0;DCFparitycalc();
+ paritycheck= testu or testm or testdmy;
+ if (p_year>99) paritycheck=1;
+ if (p_month>12) paritycheck=1;
+ if (p_dayofmonth>31) paritycheck=1;
+ if (p_hour>23) paritycheck=1;
+ if (p_minute>59) paritycheck=1;
+ if (paritycheck) {dcf_good=0;SignalStatus = 5;} // bad parity
+ else {dcf_good=1;SignalStatus = 4;} // good parity
+}
+
+void DCFsetTime()
+{
+ second = dcf_sec;
+ minute=p_minute;
+ hour=p_hour;
+ dayofweek=p_dayofweek;
+ dayofmonth=p_dayofmonth;
+ month=p_month;
+ year=p_year;
+ oled.drawText(36,7,(FONT8X12),"*",oled.toRGB(0,255,0));
+}
+void DCFbitprint()
+{
+ if (r==1) {oled.setFontColor(oled.toRGB(0,0,255));} // alternate bit draw colour
+ else {oled.setFontColor(oled.toRGB(255,255,255));}
+ oled.setFontSize(FONT8X12);
+ if (dcf_sec==21){x=5;y=7;}
+ if (dcf_sec==28){x=5;y=15;oled.locate(5,15);oled.printf(" ");}
+ if (dcf_sec==29){x=7;y=7;}
+ if (dcf_sec==35){x=7;y=15;}
+ if (dcf_sec==36){x=9;y=7;}
+ if (dcf_sec==42){x=11;y=7;}
+ if (dcf_sec==45){x=13;y=7;}
+ if (dcf_sec==50){x=15;y=7;}
+ oled.locate(x,y);
+ oled.printf("%d",dcf_status.DCFsample150);
+ y++;
+}
+
+void DCFbitmapdraw()
+{
+ x=2,y=6;
+ oled.drawText(x-2,y,(FONT8X12)," Dcf M H D d M Y",oled.toRGB(255,255,0));
+ oled.drawText(x,y+1,(FONT8X12)," 1 i o a a o e",oled.toRGB(255,255,0));
+ oled.drawText(x,y+2,(FONT8X12)," 2 n u t y n a",oled.toRGB(255,255,0));
+ oled.drawText(x,y+3,(FONT8X12)," 4 u r e t r",oled.toRGB(255,255,0));
+ oled.drawText(x,y+4,(FONT8X12)," 8 t h ",oled.toRGB(255,255,0));
+ oled.drawText(x,y+5,(FONT8X12),"10 e ",oled.toRGB(255,255,0));
+ oled.drawText(x,y+6,(FONT8X12),"20 ",oled.toRGB(255,255,0));
+ oled.drawText(x,y+7,(FONT8X12),"40 ",oled.toRGB(255,255,0));
+ oled.drawText(x,y+8,(FONT8X12),"80 ",oled.toRGB(255,255,0));
+ oled.drawText(x,y+9,(FONT8X12)," P arity ",oled.toRGB(255,255,0));
+ oled.drawLine(8,83,135,83, oled.toRGB(0, 255, 0));
+ oled.drawLine(35,70,35,195, oled.toRGB(0, 255, 0));
+}
+void DCFdrawgraph()
+{
+ if (draw_graph==0){
+ oled.setPenSize(0);
+ oled.drawRectangle(10,228,300,8,oled.toRGB(0,0,0));
+ oled.setPenSize(1);
+ oled.drawRectangle(10,227,302,10,oled.toRGB(255,255,255));
+ oled.drawLine(10,220,10,237,oled.toRGB(255,255,255));
+ oled.drawLine(312,220,312,237,oled.toRGB(255,255,255));
+ oled.drawLine(111,220,111,237,oled.toRGB(255,255,255)); //start
+ oled.drawLine(156,220,156,237,oled.toRGB(225,255,255)); //min
+ oled.drawLine(186,220,186,237,oled.toRGB(255,255,225)); //hour
+ oled.drawLine(216,220,216,237,oled.toRGB(225,255,225)); //date
+ oled.drawLine(231,220,231,237, oled.toRGB(225, 255, 225));//day
+ oled.drawLine(256,220,256,237, oled.toRGB(225, 255, 225));//month
+ oled.drawLine(301,220,301,237, oled.toRGB(225, 255, 225));//year
+ draw_graph=1;
+ }
+}
+void DCFbitstatus()
+{
+ oled.locate(29,22);
+ oled.setFontSize(FONT5X7);
+ oled.setFontColor(oled.toRGB(255,0,0));
+ oled.printf("%d %d %d %d %d",dcf_status.DCFsample50,dcf_status.DCFsample150,dcf_status.DCFsample300,dcf_status.DCFsample500,dcf_status.DCFsample600);
+ oled.setPenSize(0);
+ if (!dcf_status.DCFsample50) {oled.drawRectangle(170,190,11,12, oled.toRGB(0,0,0));}
+ else {oled.drawRectangle(170,190,11,12, oled.toRGB(255,255,255));}
+ if (!dcf_status.DCFsample150) {oled.drawRectangle(182,190,11,12, oled.toRGB(0,0,0));}
+ else {oled.drawRectangle(182,190,11,12, oled.toRGB(255,255,255));}
+ if (!dcf_status.DCFsample300) {oled.drawRectangle(194,190,11,12, oled.toRGB(0,0,0));}
+ else {oled.drawRectangle(194,190,11,12, oled.toRGB(255,255,255));}
+ if (!dcf_status.DCFsample500) {oled.drawRectangle(206,190,23,12, oled.toRGB(0,0,0));}
+ else {oled.drawRectangle(206,190,23,12, oled.toRGB(255,255,255));}
+ if (!dcf_status.DCFsample600) {oled.drawRectangle(230,190,56,12, oled.toRGB(0,0,0));}
+ else {oled.drawRectangle(230,190,56,12, oled.toRGB(0,0,255));}
+}
+
+void DCFparitycalc()
+{
+//calculate summer/winter time----------------------------------------------------------------------
+ summertime = dcf_array[17] & 1;
+//calculate hour--------------------------------------------------------------------------------------
+ hourh = dcf_array[34] * 20 + dcf_array[33] * 10;
+ hourl = dcf_array[32] * 8 + dcf_array[31] * 4 + dcf_array[30] * 2 + dcf_array[29] * 1;
+ p_hour = hourh + hourl;
+//calculate minutes------------------------------------------------------------------------------------
+ minl = dcf_array[24] * 8 + dcf_array[23] * 4 + dcf_array[22] * 2 + dcf_array[21] * 1;
+ minh = dcf_array[27] * 40 + dcf_array[26] * 20 +dcf_array[25] * 10;
+ p_minute = minh + minl;
+//calculate day of week--------------------------------------------------------------------------------
+ p_dayofweek = dcf_array[44] * 4 +dcf_array[43] * 2 + dcf_array[42] * 1;
+//calculate day----------------------------------------------------------------------------------------
+ dayl = dcf_array[39] * 8 + dcf_array[38] * 4 + dcf_array[37] * 2 + dcf_array[36] * 1;
+ dayh = dcf_array[41] * 20 + dcf_array[40] * 10;
+ p_dayofmonth=dayh+dayl;
+//calculate month--------------------------------------------------------------------------------------
+ monthh = dcf_array[49] * 10;
+ monthl = dcf_array[48] * 8 + dcf_array[47] * 4 + dcf_array[46] * 2 + dcf_array[45] * 1;
+ p_month = monthh +monthl;
+//calculate year---------------------------------------------------------------------------------------
+ yearh = dcf_array[57] * 80 + dcf_array[56] * 40 + dcf_array[55] * 20 + dcf_array[54] * 10;
+ yearl = dcf_array[53] * 8 +dcf_array[52] * 4 + dcf_array[51] * 2 + dcf_array[50] * 1;
+ p_year = yearh+yearl;
+//calculate parity
+ paritym = dcf_array[21] + dcf_array[22] + dcf_array[23] + dcf_array[24] + dcf_array[25] + dcf_array[26] +dcf_array[27] +dcf_array [28];
+ parityu =dcf_array[29] + dcf_array[30] + dcf_array[31] + dcf_array[32] + dcf_array[33] + dcf_array[34] + dcf_array[35];
+ paritydmy =dcf_array[36] + dcf_array [37] + dcf_array [38] + dcf_array [39] + dcf_array[40] + dcf_array[41] + dcf_array [42] + dcf_array [43] + dcf_array[44] + dcf_array [45] + dcf_array[46] + dcf_array [47] + dcf_array[48] + dcf_array[49] + dcf_array[50] + dcf_array[51] + dcf_array [52] + dcf_array[53] + dcf_array[54] + dcf_array[55] + dcf_array[56] + dcf_array[57] + dcf_array[58];
+//test parity------------------------------
+ testu=parityu & 1;
+ testm=paritym & 1;
+ testdmy=paritydmy & 1;
+ }
+
+void dcfIRQ(void)
+{
+ if (sync==0){
+ interrupt_counter = 0;sync=1;dcf_sec=0;error_count=0;
+ Ticker50ms.attach(& dcfISR, .05);
+ }
+}
+
+void dcfISR() //This is the interrupt service routine (ISR) that is called every 50ms
+{
+ interrupt_counter++;loop=0;
+
+ SignalLED = SignalIn; // Show dcfSignal state on LED
+
+ if (interrupt_counter == 20) { // 50mS x 20 = 1000mS = 1 Second
+ interrupt_counter = 0;second++;dcf_sec++;
+ if (start==0) dcf_sec=0;
+ }
+ if (interrupt_counter == 0){
+ if (dcf_sec==58) {SignalStatus = 3;}
+ if (dcf_sec==59) {DCFtestparity();}
+ if (dcf_good==1 && dcf_sec==1) {DCFsetTime();}
+ }
+ if (second >= 60) {++minute;second -=60;}
+ if (minute >= 60) {++hour;minute-=60;}
+ if (hour >= 24) {hour -=24;++dayofweek;++dayofmonth;}
+ if (dayofweek > 6) dayofweek = 0;
+ if (dayofmonth > maxDay(year, month)) {dayofmonth = 1;month++;}
+ if (month > 12) {month = 1;year++;}
+ if (year > 99) year = 1;
+
+ switch (interrupt_counter) {
+ case 1: { // 50mS after start of second pulse
+ dcf_status.DCFsample50 = (SignalIn);
+ break;}
+ case 3: { // 150mS after start of second pulse (bit "1" dcf Data)
+ dcf_status.DCFsample150 = (SignalIn);
+ break;}
+ case 6: { // 300mS after start of second (signal error if true)
+ dcf_status.DCFsample300 = (SignalIn);
+ if (SignalIn) {dcf_error = 1;}
+ break;}
+ case 10: { // 500mS after start of second (signal error if true)
+ dcf_status.DCFsample500 = (SignalIn);
+ if (SignalIn) {dcf_error = 1;}
+ break;}
+ case 12: { // 600mS after start of second (signal error if true)
+ dcf_status.DCFsample600 = (SignalIn);
+ if (SignalIn) {dcf_error = 1;}
+ break;}
+ }
+ if (dcf_status.DCFsample50==0 && dcf_sec<58){sync=0;}
+
+ if (interrupt_counter==1){
+ if (SignalIn){nosignal=1;}
+ else nosignal++;
+ if (nosignal>5){nosignal=2; SignalStatus = 5;signal_error=1;}
+ }
- oled.locate(3,7);
- oled.printf(datebuffer);
-
+ if (interrupt_counter==15){
+ if (!dcf_status.DCFsample150 && !dcf_status.DCFsample50) {sync=0;start=1;}
+ }
+ if (interrupt_counter==18){
+ if (dcf_error==1) {error_count++;dcf_error=0;}
+ if (error_count > 3 && sync==1) {error_count = 0;signal_error=1;}
+ }
- wait(.2);
- }
-}
\ No newline at end of file
+} // End of ISR
+
\ No newline at end of file