A simple library for decoding MP3 files with the VS1053 CoDec chip. The initial library was written by Kaoru Onoe. The library is patched to work with some "LC Technology" VS1053 board that have some IC pins disconnected. Because of that problem, there was no sound out of that boards. Now, these board work ok !

Dependents:   W7500_and_VS1053_MP3_decoder VS1053_MP3_decoder_WIZwiki-W7500 VS1053Player Scat

Fork of VS1053 by Kaoru Onoe

Revision:
2:47ba7e2259cd
Parent:
1:00c19f771676
Child:
3:696c8e6744b2
--- a/VS1053.cpp	Fri Nov 08 11:01:00 2013 +0000
+++ b/VS1053.cpp	Sat Nov 09 10:23:04 2013 +0000
@@ -1,4 +1,4 @@
-// ==================================================== Nov 08 2013, kayeks ==
+// ==================================================== Nov 09 2013, kayeks ==
 // VS1053.cpp
 // ===========================================================================
 // Just a simple library for VLSI's mp3/midi codec chip
@@ -7,7 +7,7 @@
 #include "mbed.h"
 #include "VS1053.h"
 
-/** Constructor of class VS1053 */
+/** Constructor of class VS1053. */
 VS1053::VS1053(PinName mosiPin, PinName misoPin, PinName sckPin,
                PinName csPin, PinName bsyncPin, PinName dreqPin,
                PinName rstPin, uint32_t spiFrequency)
@@ -27,11 +27,11 @@
     rst = 1;
 }
 
-/** Destructor of class VS1053 */
+/** Destructor of class VS1053. */
 VS1053::~VS1053() {
 }
 
-/** Do a hardware reset by hitting VS1053's RESET pin */
+/** Make a hardware reset by hitting VS1053's RESET pin. */
 void VS1053::hardwareReset() {
     rst = 0;
     wait(.05);
@@ -39,24 +39,26 @@
     wait(.05);
 }
 
-/** Send a byte to VS1053 */
-void VS1053::sendDataByte(uint8_t b) {
+/** Send a data byte to VS1053. */
+void VS1053::sendDataByte(uint8_t data) {
     while (!dreq);
     bsync = 0;
-    spi.write(b);
+    spi.write(data);
     bsync = 1;
 }
 
-/** Send a data block specified as a pointer to VS1053 */
-size_t VS1053::sendDataBlock(uint8_t* p, size_t length) {
+/** Send a data block specified as a pointer to VS1053.
+ *  @return Data length successfully sent.
+ */
+size_t VS1053::sendDataBlock(uint8_t* pData, size_t length) {
     size_t sizeSent = 0;
     
-    if (!p || !length) return 0;
+    if (!pData || !length) return 0;
     while (length) {
         while (!dreq);
         bsync = 0;
         for (uint8_t i = 0; i < 32 && length--; i++) {
-            spi.write(*p++);
+            spi.write(*pData++);
             sizeSent++;
         }
         bsync = 1;
@@ -64,13 +66,15 @@
     return sizeSent;
 }
 
-/** Change VS1053's PLL setting for speedup */
+/** Change VS1053's PLL setting for speedup. */
 void VS1053::clockUp() {
     // Set CLKI to 43.0-55.3 MHz
     writeReg(SCI_CLOCKF, 0x8800);  // SC_MULT=4 (3.5x), SC_ADD=1 (+1.0x)
 }
 
-/** Send cancel request to VS1053 */
+/** Send cancel request to VS1053.
+ *  @return 0 at failure, 1 at success.
+ */
 bool VS1053::sendCancel() {
     uint16_t reg;
     
@@ -84,7 +88,10 @@
     return 1;
 }
 
-/** Stop playing (CALL AFTER sendCancel SUCCESSES) */
+/** Attempts a termination of play.
+ *  Call this repeatedly during data stream tramsission until it successes.
+ *  @return 0 at failure, 1 at success.
+ */
 bool VS1053::stop() {
     uint16_t reg;
     uint8_t endFillByte;
@@ -116,7 +123,7 @@
     return readReg(SCI_HDAT0) == 0x0000 && readReg(SCI_HDAT1) == 0x0000;
 }
 
-/** Write to an SCI (Serial Control Interface) register entry */
+/** Write to an SCI (Serial Control Interface) register entry. */
 void VS1053::writeReg(uint8_t addr, uint16_t word) {
     // If addr is out-of-range, do nothing
     if (addr > 0x0f) {
@@ -133,7 +140,7 @@
     cs = 1;
 }
 
-/** Read an SCI (Serial Control Interface) register entry */
+/** Read an SCI (Serial Control Interface) register entry. */
 uint16_t VS1053::readReg(uint8_t addr) {
     uint16_t word;