Diff: main.cpp

Revision:

0:7c7d15e2f39e

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Mon Aug 19 05:44:35 2019 +0000
@@ -0,0 +1,113 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2018 ARM Limited
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#include "mbed.h"
+#include "stats_report.h"
+
+DigitalOut led1(LED1);
+
+
+
+#define FLASH_USER_START_ADDR                0x080C0000
+#define FLASH_USER_END_ADDR                  0x080FFFFF
+#define DATA_32                              ((uint32_t)0x12345678)
+
+uint32_t Address = 0, SectorError = 0;
+__IO uint32_t data32 = 0 , MemoryProgramStatus = 0;
+
+int main()
+{
+   
+    static FLASH_EraseInitTypeDef EraseInitStruct;
+    HAL_FLASH_Unlock();
+
+  /* Erase the user Flash area
+    (area defined by FLASH_USER_START_ADDR and FLASH_USER_END_ADDR) ***********/
+
+  /* Fill EraseInit structure*/
+    EraseInitStruct.TypeErase   = FLASH_TYPEERASE_SECTORS;
+    EraseInitStruct.Banks = FLASH_BANK_1;
+    EraseInitStruct.Sector = FLASH_SECTOR_7;
+    EraseInitStruct.NbSectors = 1;
+    EraseInitStruct.VoltageRange = FLASH_VOLTAGE_RANGE_3;
+
+  if(HAL_FLASHEx_Erase(&EraseInitStruct, &SectorError) != HAL_OK)
+  {
+    /*
+      Error occurred while page erase.
+      User can add here some code to deal with this error.
+      PAGEError will contain the faulty page and then to know the code error on this page,
+      user can call function 'HAL_FLASH_GetError()'
+    */
+    /* Infinite loop */
+    while (1)
+    {
+      /* Make LED2 blink (100ms on, 2s off) to indicate error in Erase operation */
+    }
+  }
+
+  /* Program the user Flash area word by word
+    (area defined by FLASH_USER_START_ADDR =  0x080C 0000 and FLASH_USER_END_ADDR) ***********/
+    
+   
+  Address =  FLASH_USER_START_ADDR;
+
+  while (Address < FLASH_USER_END_ADDR)
+  {
+    if (HAL_FLASH_Program(FLASH_TYPEPROGRAM_WORD, Address, DATA_32) == HAL_OK)
+    {
+      Address = Address + 4;
+    }
+    else
+    {
+      /* Error occurred while writing data in Flash memory.
+         User can add here some code to deal with this error */
+      while (1)
+      {
+       
+      }
+    }
+  }
+
+  /* Lock the Flash to disable the flash control register access (recommended
+     to protect the FLASH memory against possible unwanted operation) *********/
+  HAL_FLASH_Lock();
+
+  /* Check if the programmed data is OK
+      MemoryProgramStatus = 0: data programmed correctly
+      MemoryProgramStatus != 0: number of words not programmed correctly ******/
+  Address = FLASH_USER_START_ADDR;
+  MemoryProgramStatus = 0x0;
+
+  while (Address < FLASH_USER_END_ADDR)
+  {
+    data32 = *(__IO uint32_t *)Address;
+
+    if (data32 != DATA_32)
+    {
+      MemoryProgramStatus++;
+    }
+    Address = Address + 4;
+  }
+
+  /*Check if there is an issue to program data*/
+  if (MemoryProgramStatus == 0)
+  {
+    
+  }
+  else
+  {
+    /* Error detected. LED2 will blink with 1s period */
+    while (1)
+    {
+     
+    }
+  }
+  
+  
+  HAL_FLASH_Unlock();
+
+    
+}