Senet-ized LMIC for MOTE_L152RC
Fork of lmic_MOTE_L152RC by
TARGET_MOTE_L152RC/hal.h
- Committer:
- dkjendal
- Date:
- 2016-08-11
- Revision:
- 13:097c74da6ffe
- Parent:
- 0:f2716e543d97
File content as of revision 13:097c74da6ffe:
/*******************************************************************************
* Copyright (c) 2014-2015 IBM Corporation.
* All rights reserved. This program and the accompanying materials
* are made available under the terms of the Eclipse Public License v1.0
* which accompanies this distribution, and is available at
* http://www.eclipse.org/legal/epl-v10.html
*
* Contributors:
* IBM Zurich Research Lab - initial API, implementation and documentation
*******************************************************************************/
#ifndef _hal_hpp_
#define _hal_hpp_
/*
* initialize hardware (IO, SPI, TIMER, IRQ).
*/
void hal_init (void);
/*
* drive radio NSS pin (0=low, 1=high).
*/
void hal_pin_nss (u1_t val);
/*
* drive radio RX/TX pins (0=rx, 1=tx).
*/
//void hal_pin_rxtx (u1_t val);
void hal_opmode(u1_t mode, u1_t pa_boost);
/*
* control radio RST pin (0=low, 1=high, 2=floating)
*/
void hal_pin_rst (u1_t val);
/*
* perform 8-bit SPI transaction with radio.
* - write given byte 'outval'
* - read byte and return value
*/
u1_t hal_spi (u1_t outval);
/*
* disable all CPU interrupts.
* - might be invoked nested
* - will be followed by matching call to hal_enableIRQs()
*/
void hal_disableIRQs (void);
/*
* enable CPU interrupts.
*/
void hal_enableIRQs (void);
/*
* put system and CPU in low-power mode, sleep until interrupt.
*/
void hal_sleep (void);
/*
* return 32-bit system time in ticks.
*/
u4_t hal_ticks (void);
/*
* busy-wait until specified timestamp (in ticks) is reached.
*/
void hal_waitUntil (u4_t time);
/*
* check and rewind timer for target time.
* - return 1 if target time is close
* - otherwise rewind timer for target time or full period and return 0
*/
u1_t hal_checkTimer (u4_t targettime);
/*
* perform fatal failure action.
* - called by assertions
* - action could be HALT or reboot
*/
void hal_failed (void);
#ifndef OSTICKS_PER_SEC
#define OSTICKS_PER_SEC 16384
#elif OSTICKS_PER_SEC < 10000 || OSTICKS_PER_SEC > 64516
#error Illegal OSTICKS_PER_SEC - must be in range [10000:64516]. One tick must be 15.5us .. 100us long.
#endif
#endif // _hal_hpp_


