Senet fork
Dependencies: libxDot-mbed5 ISL29011
Fork of Dot-Examples by
examples/src/auto_ota_example.cpp@18:30f96328cfea, 2016-11-01 (annotated)
- Committer:
- Shaun Nelson
- Date:
- Tue Nov 01 09:40:48 2016 -0400
- Revision:
- 18:30f96328cfea
- Parent:
- 17:50b6694ba62f
- Child:
- 20:4209abb938c0
- Added sleep timeout to dot_util sleep functions
auto_ota_example
- send light data at 5 minute interval
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
mfiore | 0:a151a6350d7f | 1 | #include "dot_util.h" |
Mike Fiore |
14:19fae4509473 | 2 | #include "RadioEvent.h" |
mfiore | 0:a151a6350d7f | 3 | |
mfiore | 0:a151a6350d7f | 4 | #if ACTIVE_EXAMPLE == AUTO_OTA_EXAMPLE |
mfiore | 0:a151a6350d7f | 5 | |
Mike Fiore |
5:97ed5f2f099e | 6 | ///////////////////////////////////////////////////////////// |
Mike Fiore |
5:97ed5f2f099e | 7 | // * these options must match the settings on your gateway // |
Mike Fiore |
5:97ed5f2f099e | 8 | // * edit their values to match your configuration // |
Mike Fiore |
5:97ed5f2f099e | 9 | // * frequency sub band is only relevant for the 915 bands // |
Mike Fiore |
5:97ed5f2f099e | 10 | // * either the network name and passphrase can be used or // |
Mike Fiore |
5:97ed5f2f099e | 11 | // the network ID (8 bytes) and KEY (16 bytes) // |
Mike Fiore |
5:97ed5f2f099e | 12 | ///////////////////////////////////////////////////////////// |
mfiore | 3:0e3e776e2862 | 13 | static std::string network_name = "MultiTech"; |
mfiore | 3:0e3e776e2862 | 14 | static std::string network_passphrase = "MultiTech"; |
shaunkrnelson | 17:50b6694ba62f | 15 | static uint8_t network_id[] = { 0x00, 0x25, 0x0C, 0x00, 0x00, 0x01, 0x00, 0x01 }; |
shaunkrnelson | 17:50b6694ba62f | 16 | static uint8_t network_key[] = { 0x2D, 0xB6, 0xFF, 0x53, 0x57, 0x8C, 0x24, 0x62, 0x3A, 0xA3, 0xBD, 0xAA, 0x7A, 0x83, 0x69, 0x48}; |
mfiore | 3:0e3e776e2862 | 17 | static uint8_t frequency_sub_band = 0; |
shaunkrnelson | 17:50b6694ba62f | 18 | static bool public_network = true; |
Mike Fiore |
15:364df461110f | 19 | static uint8_t ack = 0; |
mfiore | 0:a151a6350d7f | 20 | |
mfiore | 0:a151a6350d7f | 21 | // deepsleep consumes slightly less current than sleep |
mfiore | 0:a151a6350d7f | 22 | // in sleep mode, IO state is maintained, RAM is retained, and application will resume after waking up |
mfiore | 0:a151a6350d7f | 23 | // in deepsleep mode, IOs float, RAM is lost, and application will start from beginning after waking up |
mfiore | 0:a151a6350d7f | 24 | // if deep_sleep == true, device will enter deepsleep mode |
mfiore | 1:c4915e00d2ce | 25 | static bool deep_sleep = true; |
mfiore | 0:a151a6350d7f | 26 | |
Shaun Nelson |
18:30f96328cfea | 27 | #define SLEEP_SECONDS 300 |
Shaun Nelson |
18:30f96328cfea | 28 | |
mfiore | 0:a151a6350d7f | 29 | mDot* dot = NULL; |
mfiore | 0:a151a6350d7f | 30 | Serial pc(USBTX, USBRX); |
mfiore | 0:a151a6350d7f | 31 | |
mfiore | 0:a151a6350d7f | 32 | #if defined(TARGET_XDOT_L151CC) |
shaunkrnelson | 17:50b6694ba62f | 33 | |
mfiore | 0:a151a6350d7f | 34 | I2C i2c(I2C_SDA, I2C_SCL); |
mfiore | 0:a151a6350d7f | 35 | ISL29011 lux(i2c); |
mfiore | 0:a151a6350d7f | 36 | #else |
mfiore | 0:a151a6350d7f | 37 | AnalogIn lux(XBEE_AD0); |
mfiore | 0:a151a6350d7f | 38 | #endif |
mfiore | 0:a151a6350d7f | 39 | |
shaunkrnelson | 17:50b6694ba62f | 40 | |
mfiore | 0:a151a6350d7f | 41 | int main() { |
Mike Fiore |
14:19fae4509473 | 42 | // Custom event handler for automatically displaying RX data |
Mike Fiore |
14:19fae4509473 | 43 | RadioEvent events; |
Mike Fiore |
14:19fae4509473 | 44 | |
mfiore | 0:a151a6350d7f | 45 | pc.baud(115200); |
mfiore | 0:a151a6350d7f | 46 | mts::MTSLog::setLogLevel(mts::MTSLog::TRACE_LEVEL); |
shaunkrnelson | 17:50b6694ba62f | 47 | logInfo("%d:%s\r\n",__LINE__,__func__); |
mfiore | 0:a151a6350d7f | 48 | |
mfiore | 0:a151a6350d7f | 49 | dot = mDot::getInstance(); |
mfiore | 0:a151a6350d7f | 50 | |
Mike Fiore |
14:19fae4509473 | 51 | // attach the custom events handler |
Mike Fiore |
14:19fae4509473 | 52 | dot->setEvents(&events); |
Mike Fiore |
14:19fae4509473 | 53 | |
Mike Fiore |
12:ec9768677cea | 54 | if (!dot->getStandbyFlag()) { |
Mike Fiore |
16:a3832552dfe1 | 55 | logInfo("mbed-os library version: %d", MBED_LIBRARY_VERSION); |
Mike Fiore |
16:a3832552dfe1 | 56 | |
Mike Fiore |
12:ec9768677cea | 57 | // start from a well-known state |
Mike Fiore |
12:ec9768677cea | 58 | logInfo("defaulting Dot configuration"); |
Mike Fiore |
12:ec9768677cea | 59 | dot->resetConfig(); |
Mike Fiore |
12:ec9768677cea | 60 | dot->resetNetworkSession(); |
Mike Fiore |
12:ec9768677cea | 61 | |
Mike Fiore |
12:ec9768677cea | 62 | // make sure library logging is turned on |
Mike Fiore |
12:ec9768677cea | 63 | dot->setLogLevel(mts::MTSLog::INFO_LEVEL); |
mfiore | 0:a151a6350d7f | 64 | |
Mike Fiore |
12:ec9768677cea | 65 | // update configuration if necessary |
Mike Fiore |
12:ec9768677cea | 66 | // in AUTO_OTA mode the session is automatically saved, so saveNetworkSession and restoreNetworkSession are not needed |
Mike Fiore |
12:ec9768677cea | 67 | if (dot->getJoinMode() != mDot::AUTO_OTA) { |
Mike Fiore |
12:ec9768677cea | 68 | logInfo("changing network join mode to AUTO_OTA"); |
Mike Fiore |
12:ec9768677cea | 69 | if (dot->setJoinMode(mDot::AUTO_OTA) != mDot::MDOT_OK) { |
Mike Fiore |
12:ec9768677cea | 70 | logError("failed to set network join mode to AUTO_OTA"); |
Mike Fiore |
12:ec9768677cea | 71 | } |
mfiore | 0:a151a6350d7f | 72 | } |
Mike Fiore |
12:ec9768677cea | 73 | // in OTA and AUTO_OTA join modes, the credentials can be passed to the library as a name and passphrase or an ID and KEY |
Mike Fiore |
12:ec9768677cea | 74 | // only one method or the other should be used! |
Mike Fiore |
12:ec9768677cea | 75 | // network ID = crc64(network name) |
Mike Fiore |
12:ec9768677cea | 76 | // network KEY = cmac(network passphrase) |
shaunkrnelson | 17:50b6694ba62f | 77 | //update_ota_config_name_phrase(network_name, network_passphrase, frequency_sub_band, public_network, ack); |
shaunkrnelson | 17:50b6694ba62f | 78 | update_ota_config_id_key(network_id, network_key, frequency_sub_band, public_network, ack); |
Mike Fiore |
12:ec9768677cea | 79 | |
Mike Fiore |
15:364df461110f | 80 | // configure network link checks |
Mike Fiore |
15:364df461110f | 81 | // network link checks are a good alternative to requiring the gateway to ACK every packet and should allow a single gateway to handle more Dots |
Mike Fiore |
15:364df461110f | 82 | // check the link every count packets |
Mike Fiore |
15:364df461110f | 83 | // declare the Dot disconnected after threshold failed link checks |
Mike Fiore |
15:364df461110f | 84 | // for count = 3 and threshold = 5, the Dot will be considered disconnected after 15 missed packets in a row |
Shaun Nelson |
18:30f96328cfea | 85 | update_network_link_check_config(3, 5); |
Mike Fiore |
15:364df461110f | 86 | |
Mike Fiore |
12:ec9768677cea | 87 | // save changes to configuration |
Mike Fiore |
12:ec9768677cea | 88 | logInfo("saving configuration"); |
Mike Fiore |
12:ec9768677cea | 89 | if (!dot->saveConfig()) { |
Mike Fiore |
12:ec9768677cea | 90 | logError("failed to save configuration"); |
Mike Fiore |
12:ec9768677cea | 91 | } |
Mike Fiore |
12:ec9768677cea | 92 | |
Mike Fiore |
12:ec9768677cea | 93 | // display configuration |
Mike Fiore |
12:ec9768677cea | 94 | display_config(); |
mfiore | 0:a151a6350d7f | 95 | } |
mfiore | 0:a151a6350d7f | 96 | |
mfiore | 0:a151a6350d7f | 97 | while (true) { |
mfiore | 0:a151a6350d7f | 98 | uint16_t light; |
mfiore | 0:a151a6350d7f | 99 | std::vector<uint8_t> tx_data; |
mfiore | 0:a151a6350d7f | 100 | |
Shaun Nelson |
18:30f96328cfea | 101 | // join network if not joined if (!dot->getNetworkJoinStatus()) { |
Shaun Nelson |
18:30f96328cfea | 102 | join_network(); |
mfiore | 0:a151a6350d7f | 103 | |
mfiore | 0:a151a6350d7f | 104 | #if defined(TARGET_XDOT_L151CC) |
mfiore | 0:a151a6350d7f | 105 | // configure the ISL29011 sensor on the xDot-DK for continuous ambient light sampling, 16 bit conversion, and maximum range |
mfiore | 0:a151a6350d7f | 106 | lux.setMode(ISL29011::ALS_CONT); |
mfiore | 0:a151a6350d7f | 107 | lux.setResolution(ISL29011::ADC_16BIT); |
mfiore | 0:a151a6350d7f | 108 | lux.setRange(ISL29011::RNG_64000); |
mfiore | 0:a151a6350d7f | 109 | |
mfiore | 0:a151a6350d7f | 110 | // get the latest light sample and send it to the gateway |
mfiore | 0:a151a6350d7f | 111 | light = lux.getData(); |
mfiore | 0:a151a6350d7f | 112 | tx_data.push_back((light >> 8) & 0xFF); |
mfiore | 0:a151a6350d7f | 113 | tx_data.push_back(light & 0xFF); |
mfiore | 0:a151a6350d7f | 114 | logInfo("light: %lu [0x%04X]", light, light); |
mfiore | 0:a151a6350d7f | 115 | send_data(tx_data); |
mfiore | 0:a151a6350d7f | 116 | |
mfiore | 0:a151a6350d7f | 117 | // put the LSL29011 ambient light sensor into a low power state |
mfiore | 0:a151a6350d7f | 118 | lux.setMode(ISL29011::PWR_DOWN); |
mfiore | 0:a151a6350d7f | 119 | #else |
mfiore | 0:a151a6350d7f | 120 | // get some dummy data and send it to the gateway |
mfiore | 0:a151a6350d7f | 121 | light = lux.read_u16(); |
mfiore | 0:a151a6350d7f | 122 | tx_data.push_back((light >> 8) & 0xFF); |
mfiore | 0:a151a6350d7f | 123 | tx_data.push_back(light & 0xFF); |
mfiore | 0:a151a6350d7f | 124 | logInfo("light: %lu [0x%04X]", light, light); |
mfiore | 0:a151a6350d7f | 125 | send_data(tx_data); |
mfiore | 0:a151a6350d7f | 126 | #endif |
mfiore | 0:a151a6350d7f | 127 | |
mfiore | 0:a151a6350d7f | 128 | // ONLY ONE of the three functions below should be uncommented depending on the desired wakeup method |
mfiore | 0:a151a6350d7f | 129 | //sleep_wake_rtc_only(deep_sleep); |
mfiore | 0:a151a6350d7f | 130 | //sleep_wake_interrupt_only(deep_sleep); |
Shaun Nelson |
18:30f96328cfea | 131 | sleep_wake_rtc_or_interrupt(deep_sleep, SLEEP_SECONDS); |
mfiore | 0:a151a6350d7f | 132 | } |
mfiore | 0:a151a6350d7f | 133 | |
mfiore | 0:a151a6350d7f | 134 | return 0; |
mfiore | 0:a151a6350d7f | 135 | } |
mfiore | 0:a151a6350d7f | 136 | #endif |