mbed library sources. Supersedes mbed-src. Add PORTG support for STM32L476JG (SensorTile kit)

Dependents:   SensorTileTest

Fork of mbed-dev by mbed official

Revision:
153:fa9ff456f731
diff -r 9a67f0b066fc -r fa9ff456f731 targets/TARGET_STM/TARGET_STM32F3/i2c_device.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_STM/TARGET_STM32F3/i2c_device.h	Tue Dec 20 17:27:56 2016 +0000
@@ -0,0 +1,102 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_I2C_DEVICE_H
+#define MBED_I2C_DEVICE_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef DEVICE_I2C
+
+#define I2C_IP_VERSION_V2
+
+#define I2C_IT_ALL (I2C_IT_ERRI|I2C_IT_TCI|I2C_IT_STOPI|I2C_IT_NACKI|I2C_IT_ADDRI|I2C_IT_RXI|I2C_IT_TXI)
+
+/*  Family specifc settings for clock source */
+#define I2CAPI_I2C1_CLKSRC RCC_I2C1CLKSOURCE_SYSCLK
+#define I2CAPI_I2C2_CLKSRC RCC_I2C2CLKSOURCE_SYSCLK
+#define I2CAPI_I2C3_CLKSRC RCC_I2C3CLKSOURCE_SYSCLK
+
+/*  Provide the suitable timing depending on requested frequencie */
+inline uint32_t get_i2c_timing(int hz)
+{
+    uint32_t tim = 0;
+    /*
+       Values calculated with I2C_Timing_Configuration_V1.0.1.xls file (see AN4235)
+       * Standard mode (up to 100 kHz)
+       * Fast Mode (up to 400 kHz)
+       * Fast Mode Plus (up to 1 MHz)
+       Below values obtained with:
+       - I2C clock source = 64 MHz (System Clock w/ HSI) or 72 (System Clock w/ HSE)
+       - Analog filter delay = ON
+       - Digital filter coefficient = 0
+    */
+    if (SystemCoreClock == 64000000) {
+        switch (hz) {
+            case 100000:
+                tim = 0x10B17DB4; // Standard mode with Rise time = 120ns, Fall time = 120ns
+                break;
+            case 400000:
+                tim = 0x00E22163; // Fast Mode with Rise time = 120ns, Fall time = 120ns
+                break;
+            case 1000000:
+                tim = 0x00A00D1E; // Fast Mode Plus with Rise time = 120ns, Fall time = 10ns
+                break;
+            default:
+                break;
+        }
+    } else if (SystemCoreClock == 72000000) {
+        switch (hz) {
+            case 100000:
+                tim = 0x10D28DCB; // Standard mode with Rise time = 120ns, Fall time = 120ns
+                break;
+            case 400000:
+                tim = 0x00F32571; // Fast Mode with Rise time = 120ns, Fall time = 120ns
+                break;
+            case 1000000:
+                tim = 0x00C00D24; // Fast Mode Plus with Rise time = 120ns, Fall time = 10ns
+                break;
+            default:
+                break;
+        }
+    }
+    return tim;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // DEVICE_I2C
+
+#endif