mbed library sources. Supersedes mbed-src. Add PORTG support for STM32L476JG (SensorTile kit)
Fork of mbed-dev by
Diff: targets/hal/TARGET_STM/TARGET_STM32L1/sleep.c
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 0:9b334a45a8ff
- Child:
- 148:21d94c44109e
--- a/targets/hal/TARGET_STM/TARGET_STM32L1/sleep.c Tue Aug 02 14:07:36 2016 +0000 +++ b/targets/hal/TARGET_STM/TARGET_STM32L1/sleep.c Fri Sep 02 15:07:44 2016 +0100 @@ -1,98 +1,95 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#include "sleep_api.h" - -#if DEVICE_SLEEP - -#include "cmsis.h" - -static TIM_HandleTypeDef TimMasterHandle; - -void sleep(void) -{ - // Disable HAL tick interrupt - TimMasterHandle.Instance = TIM5; - __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC2); - - // Request to enter SLEEP mode - HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI); - - // Enable HAL tick interrupt - __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2); -} - -void deepsleep(void) -{ -#if defined(TARGET_MOTE_L152RC) - int8_t STOPEntry = PWR_STOPENTRY_WFI; -#endif - - // Disable HAL tick interrupt - TimMasterHandle.Instance = TIM5; - __HAL_TIM_DISABLE_IT(&TimMasterHandle, TIM_IT_CC2); - -#if defined(TARGET_MOTE_L152RC) - /* Select the regulator state in Stop mode: Set PDDS and LPSDSR bit according to PWR_Regulator value */ - MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPSDSR), PWR_LOWPOWERREGULATOR_ON); - - /* Set SLEEPDEEP bit of Cortex System Control Register */ - SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); - - /* Select Stop mode entry --------------------------------------------------*/ - if(STOPEntry == PWR_STOPENTRY_WFI) - { - /* Request Wait For Interrupt */ - __WFI(); - } - else - { - /* Request Wait For Event */ - __SEV(); - __WFE(); - __WFE(); - } - __NOP(); - __NOP(); - __NOP(); - /* Reset SLEEPDEEP bit of Cortex System Control Register */ - CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); -#else - // Request to enter STOP mode with regulator in low power mode - HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI); -#endif - - // After wake-up from STOP reconfigure the PLL - SetSysClock(); - - // Enable HAL tick interrupt - __HAL_TIM_ENABLE_IT(&TimMasterHandle, TIM_IT_CC2); -} - -#endif +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#include "sleep_api.h" +#include "hal_tick.h" + +#if DEVICE_SLEEP + +#include "cmsis.h" + +static TIM_HandleTypeDef TimMasterHandle; + +void sleep(void) { + // Stop HAL systick + HAL_SuspendTick(); + // Request to enter SLEEP mode + HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI); + // Restart HAL systick + HAL_ResumeTick(); +} + + +void deepsleep(void) +{ +#if defined(TARGET_MOTE_L152RC) + int8_t STOPEntry = PWR_STOPENTRY_WFI; +#endif + + // Stop HAL systick + TimMasterHandle.Instance = TIM_MST; + +#if defined(TARGET_MOTE_L152RC) + /* Select the regulator state in Stop mode: Set PDDS and LPSDSR bit according to PWR_Regulator value */ + MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPSDSR), PWR_LOWPOWERREGULATOR_ON); + + /* Set SLEEPDEEP bit of Cortex System Control Register */ + SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); + + /* Select Stop mode entry --------------------------------------------------*/ + if(STOPEntry == PWR_STOPENTRY_WFI) + { + /* Request Wait For Interrupt */ + __WFI(); + } + else + { + /* Request Wait For Event */ + __SEV(); + __WFE(); + __WFE(); + } + __NOP(); + __NOP(); + __NOP(); + /* Reset SLEEPDEEP bit of Cortex System Control Register */ + CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk)); +#else + // Request to enter STOP mode with regulator in low power mode + HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI); +#endif + + // After wake-up from STOP reconfigure the PLL + SetSysClock(); + + // Restart HAL systick + HAL_ResumeTick(); +} + +#endif