Diff: targets/TARGET_Maxim/TARGET_MAX32620/spi_api.c

Revision:

149:156823d33999

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_Maxim/TARGET_MAX32620/spi_api.c	Fri Oct 28 11:17:30 2016 +0100
@@ -0,0 +1,560 @@
+/*******************************************************************************
+ * Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#include <string.h>
+#include "mbed_assert.h"
+#include "cmsis.h"
+#include "spi_api.h"
+#include "spi_multi_api.h"
+#include "pinmap.h"
+#include "ioman_regs.h"
+#include "clkman_regs.h"
+#include "PeripheralPins.h"
+
+#define DEFAULT_CHAR    8
+#define DEFAULT_MODE    0
+#define DEFAULT_FREQ    1000000
+
+// BYTE maximums for FIFO and page writes; FIFO depth spec'd as 16-bit words
+#define SPI_MAX_BYTE_LEN     (MXC_CFG_SPI_FIFO_DEPTH * 2)
+#define SPI_MAX_PAGE_LEN     (MXC_CFG_SPI_FIFO_DEPTH * 2)
+
+#if DEVICE_SPI_ASYNCH
+// Instance references for async transactions
+static struct spi_s *state[MXC_CFG_SPI_INSTANCES] = {NULL};
+#endif
+
+//******************************************************************************
+void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel)
+{
+    // Make sure pins are pointing to the same SPI instance
+    SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
+    SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
+    SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
+    SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
+
+    SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
+    SPIName spi_cntl;
+
+    // Give the application the option to manually control Slave Select
+    if ((SPIName)spi_ssel != (SPIName)NC) {
+        spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
+        // Slave select is currently limited to slave select zero. If others are
+        // to be supported a function to map PinName to a value suitable for use
+        // in mstr_cfg.slave_sel will be required.
+        obj->spi.ssel = 0;
+    } else {
+        spi_cntl = spi_sclk;
+        obj->spi.ssel = -1;
+    }
+
+    SPIName spi = (SPIName)pinmap_merge(spi_data, spi_cntl);
+
+    MBED_ASSERT((SPIName)spi != (SPIName)NC);
+
+    // Set the obj pointer to the proper SPI Instance
+    obj->spi.spi = (mxc_spi_regs_t*)spi;
+
+    // Set the SPI index and FIFOs
+    obj->spi.index = MXC_SPI_GET_IDX(obj->spi.spi);
+    obj->spi.fifo = MXC_SPI_GET_SPI_FIFO(obj->spi.index);
+
+    // Configure the pins
+    pinmap_pinout(mosi, PinMap_SPI_MOSI);
+    pinmap_pinout(miso, PinMap_SPI_MISO);
+    pinmap_pinout(sclk, PinMap_SPI_SCLK);
+    pinmap_pinout(ssel, PinMap_SPI_SSEL);
+
+#if DEVICE_SPI_ASYNCH
+    // Configure default page size; size is known to async interface
+    obj->spi.spi->mstr_cfg = (obj->spi.spi->mstr_cfg & ~MXC_F_SPI_MSTR_CFG_PAGE_SIZE) | MXC_S_SPI_MSTR_CFG_PAGE_32B;
+#endif
+
+    // Enable SPI and FIFOs
+    obj->spi.spi->gen_ctrl = (MXC_F_SPI_GEN_CTRL_SPI_MSTR_EN |
+                              MXC_F_SPI_GEN_CTRL_TX_FIFO_EN |
+                              MXC_F_SPI_GEN_CTRL_RX_FIFO_EN );
+
+    obj->spi.sclk = sclk;       // save the sclk PinName in the object as a key for Quad SPI pin mapping lookup
+    spi_master_width(obj, 0);   // default this for Single SPI communications
+}
+
+//******************************************************************************
+void spi_format(spi_t *obj, int bits, int mode, int slave)
+{
+    // Check the validity of the inputs
+    MBED_ASSERT(((bits >= 1) && (bits <= 32)) && ((mode >= 0) && (mode <= 3)));
+
+    // Only supports master mode
+    MBED_ASSERT(!slave);
+
+    // Save formatting data
+    obj->spi.bits = bits;
+
+    // Set the mode
+    MXC_SET_FIELD(&obj->spi.spi->mstr_cfg, MXC_F_SPI_MSTR_CFG_SPI_MODE, mode << MXC_F_SPI_MSTR_CFG_SPI_MODE_POS);
+}
+
+//******************************************************************************
+void spi_frequency(spi_t *obj, int hz)
+{
+    // Maximum frequency is half the system frequency
+    MBED_ASSERT((unsigned int)hz <= (SystemCoreClock / 2));
+    unsigned clocks = ((SystemCoreClock / 2) / hz);
+
+    // Figure out the divider ratio
+    int clk_div = 1;
+    while (clk_div < 10) {
+        if (clocks < 0x10) {
+            break;
+        }
+        clk_div++;
+        clocks = clocks >> 1;
+    }
+
+    // Turn on the SPI clock
+    if (obj->spi.index == 0) {
+        MXC_CLKMAN->sys_clk_ctrl_11_spi0 = clk_div;
+    } else if (obj->spi.index == 1) {
+        MXC_CLKMAN->sys_clk_ctrl_12_spi1 = clk_div;
+    } else if (obj->spi.index == 2) {
+        MXC_CLKMAN->sys_clk_ctrl_13_spi2 = clk_div;
+    } else {
+        MBED_ASSERT(0);
+    }
+
+    // Set the number of clocks to hold sclk high and low
+    MXC_SET_FIELD(&obj->spi.spi->mstr_cfg, (MXC_F_SPI_MSTR_CFG_SCK_HI_CLK | MXC_F_SPI_MSTR_CFG_SCK_LO_CLK),
+        ((clocks << MXC_F_SPI_MSTR_CFG_SCK_HI_CLK_POS) | (clocks << MXC_F_SPI_MSTR_CFG_SCK_LO_CLK_POS)));
+}
+
+//******************************************************************************
+void spi_master_width(spi_t *obj, SpiWidth width)
+{
+    // Save the width to be used in the SPI header
+    switch (width) {
+        case WidthSingle:
+            obj->spi.width = MXC_S_SPI_FIFO_WIDTH_SINGLE;
+            break;
+        case WidthDual:
+            obj->spi.width = MXC_S_SPI_FIFO_WIDTH_DUAL;
+            break;
+        case WidthQuad:
+            obj->spi.width = MXC_S_SPI_FIFO_WIDTH_QUAD;
+            // do pin mapping for SDIO[2] and SDIO[3] if Quad SPI is selected
+            pinmap_pinout(obj->spi.sclk, PinMap_SPI_QUAD);
+            break;
+        default:
+            MBED_ASSERT(0);
+    }
+}
+
+//******************************************************************************
+/** Performs a master write or read transaction
+ *
+ * @param[in] obj           The SPI peripheral to use for sending
+ * @param[in] value         The value to send
+ * @param[in] direction     Direction of the transaction, TX, RX or both
+ * @return Returns the value received during send
+ */
+static int spi_master_transaction(spi_t *obj, int value, uint32_t direction)
+{
+    int bits;
+
+    // Create the header
+    uint16_t header =  (direction |                 // direction based on SPI object
+                        MXC_S_SPI_FIFO_UNIT_BITS |  // unit size
+                        ((obj->spi.bits == 32) ? 0 : obj->spi.bits << MXC_F_SPI_FIFO_SIZE_POS) |    // Number of units
+                        obj->spi.width |            // I/O width
+                        ((obj->spi.ssel == -1) ? 0 : 1 << MXC_F_SPI_FIFO_DASS_POS));
+
+    // Send the message header
+    *obj->spi.fifo->trans_16 = header;
+
+    // Send the data
+    if (obj->spi.bits < 17) {
+        *obj->spi.fifo->trans_16 = (uint16_t)value;
+    } else {
+        *obj->spi.fifo->trans_32 = (uint32_t)value;
+    }
+
+    // Get the data
+    bits = obj->spi.bits;
+    int result = 0;
+    int i = 0;
+    while (bits > 0) {
+        // Wait for data
+        while (((obj->spi.spi->fifo_ctrl & MXC_F_SPI_FIFO_CTRL_RX_FIFO_USED)
+                >> MXC_F_SPI_FIFO_CTRL_RX_FIFO_USED_POS) < 1);
+
+        result |= (*obj->spi.fifo->rslts_8 << (i++*8));
+        bits-=8;
+    }
+
+    return result;
+}
+
+//******************************************************************************
+int spi_master_write(spi_t *obj, int value)
+{
+    // set the fifo direction for full duplex, TX and RX simultaneously
+    return spi_master_transaction(obj, value, MXC_S_SPI_FIFO_DIR_BOTH);
+}
+
+//******************************************************************************
+int spi_master_read(spi_t *obj)
+{
+    return spi_master_transaction(obj, 0xFF, MXC_S_SPI_FIFO_DIR_RX);
+}
+
+//******************************************************************************
+// spi_busy() is part of the synchronous API, it is not used by the asynchronous API.
+int spi_busy(spi_t *obj)
+{
+    return !(obj->spi.spi->intfl & MXC_F_SPI_INTFL_TX_READY);
+}
+
+#if DEVICE_SPI_ASYNCH
+//******************************************************************************
+static uint32_t spi_master_read_rxfifo(mxc_spi_regs_t *spim, mxc_spi_fifo_regs_t *fifo, uint8_t *data, uint32_t len)
+{
+    uint32_t num = 0;
+    uint32_t avail = ((spim->fifo_ctrl & MXC_F_SPI_FIFO_CTRL_RX_FIFO_USED) >> MXC_F_SPI_FIFO_CTRL_RX_FIFO_USED_POS);
+
+    // Get data from the RXFIFO
+    while (avail && (len - num)) {
+        // Save data from the RXFIFO
+        if ((avail >= 4) && ((len - num) >= 4)) {
+            uint32_t temp = *fifo->rslts_32;
+            data[num++] = temp;
+            data[num++] = temp >> 8;
+            data[num++] = temp >> 16;
+            data[num++] = temp >> 24;
+            avail -= 4;
+        } else if ((avail >= 2) && ((len - num) >= 2)) {
+            uint16_t temp = *fifo->rslts_16;
+            data[num++] = temp;
+            data[num++] = temp >> 8;
+            avail -= 2;
+        } else {
+            data[num++] = *fifo->rslts_8;
+            avail--;
+        }
+
+        // Check to see if there is more data in the FIFO
+        if (avail == 0) {
+            avail = ((spim->fifo_ctrl & MXC_F_SPI_FIFO_CTRL_RX_FIFO_USED) >> MXC_F_SPI_FIFO_CTRL_RX_FIFO_USED_POS);
+        }
+    }
+
+    return num;
+}
+
+//******************************************************************************
+static uint32_t spi_master_transfer_handler(spi_t *obj)
+{
+    uint8_t read;
+    uint8_t write;
+    uint16_t header;
+    uint32_t pages;
+    uint32_t bytes;
+    uint32_t inten;
+    unsigned remain;
+    unsigned bytes_read;
+    unsigned head_rem_temp;
+    unsigned avail;
+    struct spi_s *req = &obj->spi;
+    mxc_spi_regs_t *spim = obj->spi.spi;
+    mxc_spi_fifo_regs_t *fifo = obj->spi.fifo;
+
+    inten = 0;
+
+    // Figure out if we're reading
+    read = (req->rx_data != NULL) ? 1 : 0;
+
+    // Figure out if we're writing
+    write = (req->tx_data != NULL) ? 1 : 0;
+
+    // Read byte from the FIFO if we are reading
+    if (read) {
+
+        // Read all of the data in the RXFIFO, or until we don't need anymore
+        bytes_read = spi_master_read_rxfifo(spim, fifo, &req->rx_data[req->read_num], (req->len - req->read_num));
+
+        req->read_num += bytes_read;
+
+        // Adjust head_rem if we are only reading
+        if (!write && (req->head_rem > 0)) {
+            req->head_rem -= bytes_read;
+        }
+
+        // Figure out how many bytes we have left to read
+        if (req->head_rem > 0) {
+            remain = req->head_rem;
+        } else {
+            remain = req->len - req->read_num;
+        }
+
+        if (remain) {
+
+            // Set the RX interrupts
+            if (remain > MXC_CFG_SPI_FIFO_DEPTH) {
+                spim->fifo_ctrl = ((spim->fifo_ctrl & ~MXC_F_SPI_FIFO_CTRL_RX_FIFO_AF_LVL) |
+                                   ((MXC_CFG_SPI_FIFO_DEPTH - 2) << MXC_F_SPI_FIFO_CTRL_RX_FIFO_AF_LVL_POS));
+            } else {
+                spim->fifo_ctrl = ((spim->fifo_ctrl & ~MXC_F_SPI_FIFO_CTRL_RX_FIFO_AF_LVL) |
+                                   ((remain - 1) << MXC_F_SPI_FIFO_CTRL_RX_FIFO_AF_LVL_POS));
+            }
+
+            inten |= MXC_F_SPI_INTEN_RX_FIFO_AF;
+        }
+    }
+
+    // Figure out how many bytes we have left to send headers for
+    if (write) {
+        remain = req->len - req->write_num;
+    } else {
+        remain = req->len - req->read_num;
+    }
+
+    // See if we need to send a new header
+    if ((req->head_rem <= 0) && remain) {
+
+        // Set the transaction configuration in the header
+        header = ((write | (read << 1)) << MXC_F_SPI_FIFO_DIR_POS) | (req->width << MXC_F_SPI_FIFO_WIDTH_POS);
+
+        if (remain >= SPI_MAX_BYTE_LEN) {
+
+            // Send a 32 byte header
+            if (remain == SPI_MAX_BYTE_LEN) {
+
+                header |= (MXC_S_SPI_FIFO_UNIT_BYTES | MXC_F_SPI_FIFO_DASS);
+
+                // Save the number of bytes we need to write to the FIFO
+                bytes = SPI_MAX_BYTE_LEN;
+
+            } else {
+                // Send in increments of 32 byte pages
+                header |= MXC_S_SPI_FIFO_UNIT_PAGES;
+                pages = remain / SPI_MAX_PAGE_LEN;
+
+                if (pages >= 32) {
+                    // 0 maps to 32 in the header
+                    bytes = 32 * SPI_MAX_PAGE_LEN;
+                } else {
+                    header |= (pages << MXC_F_SPI_FIFO_SIZE_POS);
+                    bytes = pages * SPI_MAX_PAGE_LEN;
+                }
+
+                // Check if this is the last header we will send
+                if ((remain - bytes) == 0) {
+                    header |= MXC_F_SPI_FIFO_DASS;
+                }
+            }
+
+            fifo->trans_16[0] = header;
+
+            // Save the number of bytes we need to write to the FIFO
+            req->head_rem = bytes;
+
+        } else {
+            // Send final header with the number of bytes remaining and de-assert the SS at the end of the transaction
+            header |= (MXC_S_SPI_FIFO_UNIT_BYTES | (remain << MXC_F_SPI_FIFO_SIZE_POS) | MXC_F_SPI_FIFO_DASS);
+            fifo->trans_16[0] = header;
+            req->head_rem = remain;
+        }
+    }
+
+    // Put data into the FIFO if we are writing
+    remain = req->len - req->write_num;
+    head_rem_temp = req->head_rem;
+    if (write && head_rem_temp) {
+
+        // Fill the FIFO
+        avail = (MXC_CFG_SPI_FIFO_DEPTH - ((spim->fifo_ctrl & MXC_F_SPI_FIFO_CTRL_TX_FIFO_USED) >> MXC_F_SPI_FIFO_CTRL_TX_FIFO_USED_POS));
+
+        // Use memcpy for everything except the last byte in odd length transactions
+        while ((avail >= 2) && (head_rem_temp >= 2)) {
+
+            unsigned length;
+            if (head_rem_temp < avail) {
+                length = head_rem_temp;
+            } else {
+                length = avail;
+            }
+
+            // Only memcpy even numbers
+            length = ((length / 2) * 2);
+
+            memcpy((void*)fifo->trans_32, &(req->tx_data[req->write_num]), length);
+
+            head_rem_temp -= length;
+            req->write_num += length;
+
+            avail = (MXC_CFG_SPI_FIFO_DEPTH - ((spim->fifo_ctrl & MXC_F_SPI_FIFO_CTRL_TX_FIFO_USED) >> MXC_F_SPI_FIFO_CTRL_TX_FIFO_USED_POS));
+        }
+
+        // Copy the last byte and pad with 0xF0 to not get confused as header
+        if ((avail >= 1) && (head_rem_temp == 1)) {
+
+            // Write the last byte
+            fifo->trans_16[0] = (0xF000 | req->tx_data[req->write_num]);
+
+            avail -= 1;
+            req->write_num += 1;
+            head_rem_temp -= 1;
+        }
+
+        req->head_rem = head_rem_temp;
+        remain = req->len - req->write_num;
+
+        // Set the TX interrupts
+        if (remain) {
+
+            // Set the TX FIFO almost empty interrupt if we have to refill
+            spim->fifo_ctrl = ((spim->fifo_ctrl & ~MXC_F_SPI_FIFO_CTRL_TX_FIFO_AE_LVL) |
+                               ((MXC_CFG_SPI_FIFO_DEPTH - 2) << MXC_F_SPI_FIFO_CTRL_TX_FIFO_AE_LVL_POS));
+
+            inten |= MXC_F_SPI_INTEN_TX_FIFO_AE;
+        }
+    }
+
+    // Check to see if we've finished reading and writing
+    if (((read && (req->read_num == req->len)) || !read) &&
+            ((req->write_num == req->len) || !write)) {
+
+        // Disable interrupts
+        spim->inten = 0;
+    }
+
+    // Enable the SPIM interrupts
+    return inten;
+}
+
+//******************************************************************************
+void spi_master_transfer(spi_t *obj, const void *tx, size_t tx_length, void *rx, size_t rx_length, uint8_t bit_width, uint32_t handler, uint32_t event, DMAUsage hint)
+{
+    MBED_ASSERT(tx_length == rx_length);
+    MBED_ASSERT(bit_width == obj->spi.bits);
+
+    // Save object reference for callback
+    state[obj->spi.index] = &obj->spi;
+
+    // Initialize request info
+    obj->spi.tx_data = tx;
+    obj->spi.rx_data = rx;
+    obj->spi.len = tx_length;
+    obj->spi.callback = (void(*)())handler;
+    obj->spi.event = event;
+    // Clear transfer state
+    obj->spi.read_num = 0;
+    obj->spi.write_num = 0;
+    obj->spi.head_rem = 0;
+
+    NVIC_EnableIRQ(MXC_SPI_GET_IRQ(obj->spi.index));
+
+    obj->spi.spi->inten = spi_master_transfer_handler(obj);
+}
+
+//******************************************************************************
+uint32_t spi_irq_handler_asynch(spi_t *obj)
+{
+    mxc_spi_regs_t *spim = obj->spi.spi;
+    uint32_t flags;
+
+    // Clear the interrupt flags
+    spim->inten = 0;
+    flags = spim->intfl;
+    spim->intfl = flags;
+
+    // Figure out if this SPIM has an active request
+    if (flags) {
+        if ((spim->inten = spi_master_transfer_handler(obj)) != 0) {
+            return 0;
+        }
+    }
+
+    state[obj->spi.index] = NULL;
+
+    return SPI_EVENT_COMPLETE;
+}
+
+//******************************************************************************
+uint8_t spi_active(spi_t *obj)
+{
+    mxc_spi_regs_t *spim = obj->spi.spi;
+
+    // Check to see if there are any ongoing transactions
+    if ((state[obj->spi.index] == NULL) &&
+            !(spim->fifo_ctrl & MXC_F_SPI_FIFO_CTRL_TX_FIFO_USED)) {
+        return 0;
+    }
+
+    return 1;
+}
+
+//******************************************************************************
+void spi_abort_asynch(spi_t *obj)
+{
+    mxc_spi_regs_t *spim = obj->spi.spi;
+
+    // Disable interrupts, clear the flags
+    spim->inten = 0;
+    spim->intfl = spim->intfl;
+
+    // Reset the SPIM to cancel the on ongoing transaction
+    spim->gen_ctrl &= ~(MXC_F_SPI_GEN_CTRL_SPI_MSTR_EN);
+    spim->gen_ctrl |= (MXC_F_SPI_GEN_CTRL_SPI_MSTR_EN);
+
+    state[obj->spi.index] = NULL;
+}
+
+//******************************************************************************
+static void SPI_IRQHandler(int spim_num)
+{
+    if (state[spim_num] != NULL) {
+        if (state[spim_num]->callback != NULL) {
+            state[spim_num]->callback();
+            return;
+        }
+    }
+    mxc_spi_regs_t *spim = MXC_SPI_GET_SPI(spim_num);
+    spim->inten = 0;
+}
+
+//******************************************************************************
+void SPI0_IRQHandler(void) { SPI_IRQHandler(0); }
+void SPI1_IRQHandler(void) { SPI_IRQHandler(1); }
+void SPI2_IRQHandler(void) { SPI_IRQHandler(2); }
+
+#endif