Diff: source/main.cpp

Revision:

0:0681e205d0e9

Child:

1:b56863927244

diff -r 000000000000 -r 0681e205d0e9 source/main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/source/main.cpp	Wed Feb 15 21:18:58 2017 +0100
@@ -0,0 +1,136 @@
+/*
+ * PackageLicenseDeclared: Apache-2.0
+ * Copyright (c) 2017 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <string>
+#include "mbed.h"
+#include "easy-connect.h"
+#include "sn_nsdl.h"
+#include "sn_coap_protocol.h"
+#include "sn_coap_header.h"
+
+UDPSocket socket;           // Socket to talk CoAP over
+Thread recvfromThread;      // Thread to receive messages over CoAP
+
+struct coap_s* coapHandle;
+coap_version_e coapVersion = COAP_VERSION_1;
+
+// CoAP HAL
+void* coap_malloc(uint16_t size) {
+    return malloc(size);
+}
+
+void coap_free(void* addr) {
+    free(addr);
+}
+
+// tx_cb and rx_cb are not used in this program
+uint8_t coap_tx_cb(uint8_t *a, uint16_t b, sn_nsdl_addr_s *c, void *d) {
+    printf("coap tx cb\n");
+    return 0;
+}
+
+int8_t coap_rx_cb(sn_coap_hdr_s *a, sn_nsdl_addr_s *b, void *c) {
+    printf("coap rx cb\n");
+    return 0;
+}
+
+// Main function for the recvfrom thread
+void recvfromMain() {
+    SocketAddress addr;
+    uint8_t* recv_buffer = (uint8_t*)malloc(1280); // Suggested is to keep packet size under 1280 bytes
+
+    nsapi_size_or_error_t ret;
+
+    while ((ret = socket.recvfrom(&addr, recv_buffer, 1280)) >= 0) {
+        // to see where the message came from, inspect addr.get_addr() and addr.get_port()
+
+        printf("Received a message of length '%d'\n", ret);
+
+        sn_coap_hdr_s* parsed = sn_coap_parser(coapHandle, ret, recv_buffer, &coapVersion);
+
+        // We know the payload is going to be a string
+        std::string payload((const char*)parsed->payload_ptr, parsed->payload_len);
+
+        printf("\tmsg_id:           %d\n", parsed->msg_id);
+        printf("\tmsg_code:         %d\n", parsed->msg_code);
+        printf("\tcontent_format:   %d\n", parsed->content_format);
+        printf("\tpayload_len:      %d\n", parsed->payload_len);
+        printf("\tpayload:          %s\n", payload.c_str());
+        printf("\toptions_list_ptr: %p\n", parsed->options_list_ptr);
+    }
+
+    free(recv_buffer);
+
+    printf("UDPSocket::recvfrom failed, error code %d. Shutting down receive thread.\n", ret);
+}
+
+int main() {
+    NetworkInterface *network = easy_connect(true);
+    if (!network) {
+        printf("Cannot connect to the network, see serial output");
+        return 1;
+    }
+
+    printf("Connected to the network. Opening a socket...\n");
+
+    // Open a socket on the network interface
+    socket.open(network);
+
+    // Initialize the CoAP protocol handle, pointing to local implementations on malloc/free/tx/rx functions
+    coapHandle = sn_coap_protocol_init(&coap_malloc, &coap_free, &coap_tx_cb, &coap_rx_cb);
+
+    // UDPSocket::recvfrom is blocking, so run it in a separate RTOS thread
+    recvfromThread.start(&recvfromMain);
+
+    // Path to the resource we want to retrieve
+    const char* coap_uri_path = "/hello";
+
+    // See ns_coap_header.h
+    sn_coap_hdr_s *coap_res_ptr = (sn_coap_hdr_s*)calloc(sizeof(sn_coap_hdr_s), 1);
+    coap_res_ptr->uri_path_ptr = (uint8_t*)coap_uri_path;       // Path
+    coap_res_ptr->uri_path_len = strlen(coap_uri_path);
+    coap_res_ptr->msg_code = COAP_MSG_CODE_REQUEST_GET;         // CoAP method
+    coap_res_ptr->content_format = COAP_CT_TEXT_PLAIN;          // CoAP content type
+    coap_res_ptr->payload_len = 0;                              // Body length
+    coap_res_ptr->payload_ptr = 0;                              // Body pointer
+    coap_res_ptr->options_list_ptr = 0;                         // Optional: options list
+    // Message ID is used to track request->response patterns, because we're using UDP (so everything is unconfirmed).
+    // See the receive code to verify that we get the same message ID back
+    coap_res_ptr->msg_id = 7;
+
+    // Calculate the CoAP message size, allocate the memory and build the message
+    uint16_t message_len = sn_coap_builder_calc_needed_packet_data_size(coap_res_ptr);
+    printf("Calculated message length: %d bytes\n", message_len);
+
+    uint8_t* message_ptr = (uint8_t*)malloc(message_len);
+    sn_coap_builder(message_ptr, coap_res_ptr);
+
+    // Uncomment to see the raw buffer that will be sent...
+    // printf("Message is: ");
+    // for (size_t ix = 0; ix < message_len; ix++) {
+    //     printf("%02x ", message_ptr[ix]);
+    // }
+    // printf("\n");
+
+    int scount = socket.sendto("coap.me", 5683, message_ptr, message_len);
+    printf("Sent %d bytes to coap://coap.me:5683\n", scount);
+
+    free(coap_res_ptr);
+    free(message_ptr);
+
+    Thread::wait(osWaitForever);
+}