Joao Vieira / Mbed 2 deprecated Can_sniffer_bms

TLMoto

Dependencies:   CANnucleo CANnucleo_Hello mbed

Fork of CANnucleo_Hello by Zoltan Hudak

main.cpp@16:a86f339d1c25, 2016-07-31 (annotated)

Committer:
hudakz
Date:
Sun Jul 31 21:36:52 2016 +0000
Revision:
16:a86f339d1c25
Parent:
15:6449443e2207
Child:
17:18d4d0ff26a6
Reverted to use CANnucleo library and mbed rev. 120

; Tested with NUCLEO-F103RB and STM32F103C8T6 boards.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
hudakz 0:c5e5d0df6f2a 1 /*
hudakz 16:a86f339d1c25 2 * An example showing how to use the CANnucleo library:
hudakz 0:c5e5d0df6f2a 3 *
hudakz 16:a86f339d1c25 4 * Two affordable (less than $4 on ebay) STM32F103C8T6 boards (20kB SRAM, 64kB Flash),
hudakz 16:a86f339d1c25 5 * compatible with the NUCLEO-F103RB platform (20kB SRAM, 128kB Flash),
hudakz 6:7ff95ce72f6d 6 * are connected to the same CAN bus via transceivers (MCP2551 or TJA1040, or etc.).
hudakz 6:7ff95ce72f6d 7 * CAN transceivers are not part of NUCLEO boards, therefore must be added by you.
hudakz 6:7ff95ce72f6d 8 * Remember also that CAN bus (even a short one) must be terminated with 120 Ohm resitors at both ends.
hudakz 6:7ff95ce72f6d 9 *
hudakz 16:a86f339d1c25 10 * For more details see the wiki page <https://developer.mbed.org/users/hudakz/code/CANnucleo_Hello/>
hudakz 6:7ff95ce72f6d 11 *
hudakz 16:a86f339d1c25 12 * NOTE: If you'd like to use the official NUCLEO boards comment out line 25
hudakz 6:7ff95ce72f6d 13 *
hudakz 6:7ff95ce72f6d 14 * The same code is used for both NUCLEO boards, but:
hudakz 0:c5e5d0df6f2a 15 * For board #1 compile the example without any change.
hudakz 16:a86f339d1c25 16 * For board #2 comment out line 26 before compiling
hudakz 4:ccf4ac2deac8 17 *
hudakz 6:7ff95ce72f6d 18 * Once the binaries have been downloaded to the boards reset board #1.
hudakz 0:c5e5d0df6f2a 19 *
hudakz 0:c5e5d0df6f2a 20 */
hudakz 0:c5e5d0df6f2a 21
hudakz 14:e12ebd1260b1 22 //#define TARGET_STM32F103C8T6 1 // comment out this line when using official NUCLEO boards!
hudakz 10:66da8731bdb6 23 #define BOARD1 1 // comment out this line when compiling for board #2
hudakz 0:c5e5d0df6f2a 24
hudakz 16:a86f339d1c25 25 #if defined(TARGET_STM32F103C8T6)
hudakz 16:a86f339d1c25 26 #include "stm32f103c8t6.h"
hudakz 10:66da8731bdb6 27 const int OFF = 1;
hudakz 10:66da8731bdb6 28 const int ON = 0;
hudakz 0:c5e5d0df6f2a 29 #else
hudakz 10:66da8731bdb6 30 const int OFF = 0;
hudakz 10:66da8731bdb6 31 const int ON = 1;
hudakz 0:c5e5d0df6f2a 32 #endif
hudakz 0:c5e5d0df6f2a 33
hudakz 10:66da8731bdb6 34 #if defined(BOARD1)
hudakz 10:66da8731bdb6 35 const unsigned int RX_ID = 0x100;
hudakz 10:66da8731bdb6 36 const unsigned int TX_ID = 0x101;
hudakz 6:7ff95ce72f6d 37 #else
hudakz 10:66da8731bdb6 38 const unsigned int RX_ID = 0x101;
hudakz 10:66da8731bdb6 39 const unsigned int TX_ID = 0x100;
hudakz 6:7ff95ce72f6d 40 #endif
hudakz 6:7ff95ce72f6d 41
hudakz 16:a86f339d1c25 42 #include "mbed.h"
hudakz 16:a86f339d1c25 43 #include "CANnucleo.h"
hudakz 16:a86f339d1c25 44
hudakz 16:a86f339d1c25 45 DigitalOut led(LED1);
hudakz 16:a86f339d1c25 46 int ledState;
hudakz 11:07d927da1a94 47 Timer timer;
hudakz 16:a86f339d1c25 48 CAN can(PA_11, PA_12); // CAN Rx pin name, CAN Tx pin name
hudakz 11:07d927da1a94 49 CANMessage rxMsg;
hudakz 16:a86f339d1c25 50 CANMessage txMsg;
hudakz 16:a86f339d1c25 51 int counter = 0;
hudakz 16:a86f339d1c25 52 volatile bool msgAvailable = false;
hudakz 0:c5e5d0df6f2a 53
hudakz 16:a86f339d1c25 54 /**
hudakz 16:a86f339d1c25 55 * @brief 'CAN receive-complete' interrup handler.
hudakz 16:a86f339d1c25 56 * @note Called on arrival of new CAN message.
hudakz 16:a86f339d1c25 57 * Keep it as short as possible.
hudakz 16:a86f339d1c25 58 * @param
hudakz 16:a86f339d1c25 59 * @retval
hudakz 16:a86f339d1c25 60 */
hudakz 16:a86f339d1c25 61 void onMsgReceived() {
hudakz 16:a86f339d1c25 62 msgAvailable = true;
hudakz 16:a86f339d1c25 63 }
hudakz 16:a86f339d1c25 64
hudakz 16:a86f339d1c25 65 /**
hudakz 16:a86f339d1c25 66 * @brief Main
hudakz 16:a86f339d1c25 67 * @note
hudakz 16:a86f339d1c25 68 * @param
hudakz 16:a86f339d1c25 69 * @retval
hudakz 16:a86f339d1c25 70 */
hudakz 16:a86f339d1c25 71 int main() {
hudakz 16:a86f339d1c25 72 #if defined(TARGET_STM32F103C8T6)
hudakz 16:a86f339d1c25 73 confSysClock();
hudakz 16:a86f339d1c25 74 #endif
hudakz 16:a86f339d1c25 75 can.frequency(1000000); // set bit rate to 1Mbps
hudakz 16:a86f339d1c25 76 can.attach(&onMsgReceived); // attach 'CAN receive-complete' interrupt handler
hudakz 16:a86f339d1c25 77
hudakz 0:c5e5d0df6f2a 78 #if defined(BOARD1)
hudakz 10:66da8731bdb6 79 led = ON; // turn LED on
hudakz 10:66da8731bdb6 80 timer.start(); // start timer
hudakz 16:a86f339d1c25 81 printf("CANnucleo_Hello board #1\r\n");
hudakz 0:c5e5d0df6f2a 82 #else
hudakz 10:66da8731bdb6 83 led = OFF; // turn LED off
hudakz 16:a86f339d1c25 84 printf("CANnucleo_Hello board #2\r\n");
hudakz 0:c5e5d0df6f2a 85 #endif
hudakz 0:c5e5d0df6f2a 86
hudakz 0:c5e5d0df6f2a 87 while(1) {
hudakz 16:a86f339d1c25 88 if(timer.read() >= 1.0) { // check for timeout
hudakz 16:a86f339d1c25 89 timer.stop(); // stop timer
hudakz 16:a86f339d1c25 90 timer.reset(); // reset timer
hudakz 16:a86f339d1c25 91 counter++; // increment counter
hudakz 16:a86f339d1c25 92 ledState = led.read(); // get led state
hudakz 16:a86f339d1c25 93 txMsg.clear(); // clear Tx message storage
hudakz 16:a86f339d1c25 94 txMsg.id = TX_ID; // set ID
hudakz 16:a86f339d1c25 95 txMsg << counter; // append first data item
hudakz 16:a86f339d1c25 96 txMsg << ledState; // append second data item (total data lenght must be <= 8 bytes!)
hudakz 16:a86f339d1c25 97 led = OFF; // turn LED off
hudakz 16:a86f339d1c25 98 if(can.write(txMsg)) // transmit message
hudakz 16:a86f339d1c25 99 printf("CAN message sent\r\n");
hudakz 10:66da8731bdb6 100 else
hudakz 16:a86f339d1c25 101 printf("Transmission error\r\n");
hudakz 0:c5e5d0df6f2a 102 }
hudakz 16:a86f339d1c25 103 if(msgAvailable) {
hudakz 16:a86f339d1c25 104 msgAvailable = false; // reset flag for next use
hudakz 16:a86f339d1c25 105 can.read(rxMsg); // read message into Rx message storage
hudakz 16:a86f339d1c25 106 printf("CAN message received:\r\n");
hudakz 15:6449443e2207 107 printf(" ID = 0x%.3x\r\n", rxMsg.id);
hudakz 2:49c9430860d1 108 printf(" Type = %d\r\n", rxMsg.type);
hudakz 2:49c9430860d1 109 printf(" Format = %d\r\n", rxMsg.format);
hudakz 2:49c9430860d1 110 printf(" Length = %d\r\n", rxMsg.len);
hudakz 2:49c9430860d1 111 printf(" Data =");
hudakz 2:49c9430860d1 112 for(int i = 0; i < rxMsg.len; i++)
hudakz 14:e12ebd1260b1 113 printf(" 0x%.2x", rxMsg.data[i]);
hudakz 10:66da8731bdb6 114 printf("\r\n");
hudakz 16:a86f339d1c25 115 // Filtering performed by software:
hudakz 16:a86f339d1c25 116 if(rxMsg.id == RX_ID) { // See comments in CAN.cpp for filtering performed by hardware
hudakz 16:a86f339d1c25 117 rxMsg >> counter; // extract first data item
hudakz 16:a86f339d1c25 118 rxMsg >> ledState; // extract second data item
hudakz 16:a86f339d1c25 119 printf(" counter = %d\r\n", counter);
hudakz 16:a86f339d1c25 120 led = ON; // turn LED on
hudakz 16:a86f339d1c25 121 timer.start(); // transmission lag
hudakz 0:c5e5d0df6f2a 122 }
hudakz 0:c5e5d0df6f2a 123 }
hudakz 0:c5e5d0df6f2a 124 }
hudakz 0:c5e5d0df6f2a 125 }
hudakz 7:2dce8ed51091 126
hudakz 12:e91e44924194 127