Scott Jenson / Mbed 2 deprecated BLE_EddystoneBeaconConfigService_Button

Button initiated config service

Dependencies:   BLE_API_EddystoneConfigService_2 mbed nRF51822

Fork of BLE_EddystoneBeaconConfigService_3 by URIBeacon

main.cpp@51:d77639d7a3e4, 2015-09-14 (annotated)

Committer:
mbedAustin
Date:
Mon Sep 14 21:37:36 2015 +0000
Revision:
51:d77639d7a3e4
Parent:
50:52a8b18d5bf1
Child:
53:cc4cb139ef0d
republishing with all frames enabled

Who changed what in which revision?

UserRevisionLine numberNew contents of line
screamer 0:c04d932e96c9 1 /* mbed Microcontroller Library
screamer 0:c04d932e96c9 2 * Copyright (c) 2006-2013 ARM Limited
screamer 0:c04d932e96c9 3 *
screamer 0:c04d932e96c9 4 * Licensed under the Apache License, Version 2.0 (the "License");
screamer 0:c04d932e96c9 5 * you may not use this file except in compliance with the License.
screamer 0:c04d932e96c9 6 * You may obtain a copy of the License at
screamer 0:c04d932e96c9 7 *
screamer 0:c04d932e96c9 8 * http://www.apache.org/licenses/LICENSE-2.0
screamer 0:c04d932e96c9 9 *
screamer 0:c04d932e96c9 10 * Unless required by applicable law or agreed to in writing, software
screamer 0:c04d932e96c9 11 * distributed under the License is distributed on an "AS IS" BASIS,
screamer 0:c04d932e96c9 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
screamer 0:c04d932e96c9 13 * See the License for the specific language governing permissions and
screamer 0:c04d932e96c9 14 * limitations under the License.
screamer 0:c04d932e96c9 15 */
screamer 0:c04d932e96c9 16
screamer 0:c04d932e96c9 17 #include "mbed.h"
rgrover1 7:e9800c45e065 18 #include "BLE.h"
mbedAustin 23:05e9bb3b13af 19 #include "EddystoneConfigService.h"
mbedAustin 34:5876fbb1aa62 20
rgrover1 2:8020d6d4455a 21 #include "ConfigParamsPersistence.h"
screamer 0:c04d932e96c9 22
rgrover1 8:1a21308e5008 23 BLE ble;
mbedAustin 24:8edfe6730cc2 24 EddystoneConfigService *EddystoneBeaconConfig;
mbedAustin 39:2c73bc1ff4f5 25 EddystoneConfigService::Params_t params;
screamer 0:c04d932e96c9 26
screamer 0:c04d932e96c9 27 /**
screamer 0:c04d932e96c9 28 * URIBeaconConfig service can operate in two modes: a configuration mode which
screamer 0:c04d932e96c9 29 * allows a user to update settings over a connection; and normal URIBeacon mode
screamer 0:c04d932e96c9 30 * which involves advertising a URI. Constructing an object from URIBeaconConfig
screamer 0:c04d932e96c9 31 * service sets up advertisements for the configuration mode. It is then up to
screamer 0:c04d932e96c9 32 * the application to switch to URIBeacon mode based on some timeout.
screamer 0:c04d932e96c9 33 *
screamer 0:c04d932e96c9 34 * The following help with this switch.
screamer 0:c04d932e96c9 35 */
mbedAustin 50:52a8b18d5bf1 36 static const int CONFIG_ADVERTISEMENT_TIMEOUT_SECONDS = 60 ; // Duration after power-on that config service is available.
mbedAustin 24:8edfe6730cc2 37 Ticker configAdvertisementTimeout;
screamer 0:c04d932e96c9 38
screamer 0:c04d932e96c9 39 /**
mbedAustin 19:f7c33fa88ca5 40 * Stop advertising the Config Service after a delay; and switch to a non-connectable advertising mode only beacon.
screamer 0:c04d932e96c9 41 */
screamer 0:c04d932e96c9 42 void timeout(void)
screamer 0:c04d932e96c9 43 {
screamer 0:c04d932e96c9 44 Gap::GapState_t state;
screamer 0:c04d932e96c9 45 state = ble.getGapState();
screamer 0:c04d932e96c9 46 if (!state.connected) { /* don't switch if we're in a connected state. */
mbedAustin 24:8edfe6730cc2 47 configAdvertisementTimeout.detach(); /* disable the callback from the timeout Ticker. */
mbedAustin 15:af8c24f34a9f 48 printf("removing config service\r\n");
mbedAustin 50:52a8b18d5bf1 49 EddystoneBeaconConfig->setupEddystoneAdvertisements();
screamer 0:c04d932e96c9 50 }
screamer 0:c04d932e96c9 51 }
screamer 0:c04d932e96c9 52
screamer 0:c04d932e96c9 53 /**
mbedAustin 40:6f39aee31205 54 * Callback triggered upon a disconnection event.
screamer 0:c04d932e96c9 55 */
screamer 0:c04d932e96c9 56 void disconnectionCallback(Gap::Handle_t handle, Gap::DisconnectionReason_t reason)
screamer 0:c04d932e96c9 57 {
mbedAustin 39:2c73bc1ff4f5 58 if (true == params.isConfigured){
mbedAustin 39:2c73bc1ff4f5 59 // end advertising, the beacon is configured
mbedAustin 39:2c73bc1ff4f5 60 timeout();
mbedAustin 39:2c73bc1ff4f5 61 }
mbedAustin 39:2c73bc1ff4f5 62 else{
mbedAustin 40:6f39aee31205 63 // eddystone is not configured, continue advertising
mbedAustin 39:2c73bc1ff4f5 64 ble.gap().startAdvertising();
mbedAustin 39:2c73bc1ff4f5 65 printf("disconnect CB\r\n");
mbedAustin 39:2c73bc1ff4f5 66 }
screamer 0:c04d932e96c9 67 }
screamer 0:c04d932e96c9 68
screamer 0:c04d932e96c9 69 int main(void)
screamer 0:c04d932e96c9 70 {
mbedAustin 15:af8c24f34a9f 71 printf("Starting Example\r\n");
screamer 0:c04d932e96c9 72 ble.init();
rgrover1 8:1a21308e5008 73 ble.gap().onDisconnection(disconnectionCallback);
screamer 0:c04d932e96c9 74
screamer 0:c04d932e96c9 75 /*
screamer 0:c04d932e96c9 76 * Load parameters from (platform specific) persistent storage. Parameters
screamer 0:c04d932e96c9 77 * can be set to non-default values while the URIBeacon is in configuration
screamer 0:c04d932e96c9 78 * mode (within the first 60 seconds of power-up). Thereafter, parameters
screamer 0:c04d932e96c9 79 * get copied out to persistent storage before switching to normal URIBeacon
screamer 0:c04d932e96c9 80 * operation.
screamer 0:c04d932e96c9 81 */
rgrover1 2:8020d6d4455a 82 bool fetchedFromPersistentStorage = loadURIBeaconConfigParams(&params);
mbedAustin 44:0e27ee7800b8 83
mbedAustin 44:0e27ee7800b8 84 // Set UID and TLM frame data
mbedAustin 31:11e7a505a4be 85 EddystoneConfigService::UIDNamespaceID_t uidNamespaceID = {0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99}; // 10Byte Namespace UUID
mbedAustin 31:11e7a505a4be 86 EddystoneConfigService::UIDInstanceID_t uidInstanceID = {0xAA, 0xBB, 0xCC, 0xDD, 0xEE, 0xFF}; // 6Byte Instance ID
mbedAustin 31:11e7a505a4be 87 uint8_t tlmVersion = 0x00;
mbedAustin 31:11e7a505a4be 88
mbedAustin 24:8edfe6730cc2 89 /* Initialize a EddystoneBeaconConfig service providing config params, default URI, and power levels. */
mbedAustin 23:05e9bb3b13af 90 static EddystoneConfigService::PowerLevels_t defaultAdvPowerLevels = {-20, -4, 0, 10}; // Values for ADV packets related to firmware levels
mbedAustin 44:0e27ee7800b8 91 EddystoneBeaconConfig = new EddystoneConfigService(ble, params, defaultAdvPowerLevels);
mbedAustin 44:0e27ee7800b8 92 EddystoneBeaconConfig->setDefaultURIFrameData("http://mbed.org",1000);
mbedAustin 51:d77639d7a3e4 93 EddystoneBeaconConfig->setDefaultUIDFrameData(&uidNamespaceID, &uidInstanceID,10);
mbedAustin 51:d77639d7a3e4 94 EddystoneBeaconConfig->setDefaultTLMFrameData(tlmVersion,1);
mbedAustin 44:0e27ee7800b8 95 EddystoneBeaconConfig->start(!fetchedFromPersistentStorage);
mbedAustin 44:0e27ee7800b8 96
mbedAustin 39:2c73bc1ff4f5 97 if (!EddystoneBeaconConfig->initSuccessfully()) {
screamer 0:c04d932e96c9 98 error("failed to accommodate URI");
screamer 0:c04d932e96c9 99 }
mbedAustin 24:8edfe6730cc2 100 configAdvertisementTimeout.attach(timeout, CONFIG_ADVERTISEMENT_TIMEOUT_SECONDS);
screamer 0:c04d932e96c9 101
mbedAustin 24:8edfe6730cc2 102 ble.gap().startAdvertising(); /* Set the whole thing in motion. After this call a GAP central can scan the EddystoneBeaconConfig
rgrover1 8:1a21308e5008 103 * service. This can then be switched to the normal URIBeacon functionality after a timeout. */
mbedAustin 15:af8c24f34a9f 104 printf("Running...\r\n");
screamer 0:c04d932e96c9 105 while (true) {
screamer 0:c04d932e96c9 106 ble.waitForEvent();
screamer 0:c04d932e96c9 107 }
screamer 0:c04d932e96c9 108 }