File content as of revision 3:c850737e6f51:

/*
 * Copyright (c) 2015 - 2016, Freescale Semiconductor, Inc.
 * Copyright 2016-2017 NXP
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *
 * o Redistributions of source code must retain the above copyright notice, this list
 *   of conditions and the following disclaimer.
 *
 * o Redistributions in binary form must reproduce the above copyright notice, this
 *   list of conditions and the following disclaimer in the documentation and/or
 *   other materials provided with the distribution.
 *
 * o Neither the name of the copyright holder nor the names of its
 *   contributors may be used to endorse or promote products derived from this
 *   software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include "MPL3115.h"
#include "mbed.h"

MPL3115::MPL3115(PinName sda, PinName scl) : MPL3115_i2c(sda,scl)
 {
       
 }
    
 void MPL3115::MPL3115_config(void)
 {
   char d[2]; 
   d[0] = MPL3115_CTRL_REG1;                     //Puts device in Standby mode
   d[1] = 0x00; 
   MPL3115_i2c.write(MPL3115_I2C_ADDRESS, d,2);   
          
   
   d[0] = MPL3115_CTRL_REG1;                     //Puts device in Active mode and in altimeter mode
   d[1] = 0x81;
   MPL3115_i2c.write(MPL3115_I2C_ADDRESS, d, 2);   
      
 }
 
 
 void MPL3115::acquire_MPL3115_data_Altitude_in_m(float * alt_data, float * temp_data, char * db)
// void MPL3115::acquire_MPL3115_data_Altitude_in_m(float * alt_data)
 {
   char data_bytes[7];
   char d[1];
   d[0]=MPL3115_STATUS;
   MPL3115_i2c.write(MPL3115_I2C_ADDRESS,d,1,true);  // Read the 6 data bytes - LSB and MSB for X, Y and Z Axes.
   MPL3115_i2c.read(MPL3115_I2C_ADDRESS,data_bytes,5);
   db = data_bytes;
//   printf("\n");
//   for (int i=1; i<=3; i++)
//   {
//        printf("DBYTE:%.2f", (float)(short)data_bytes[i]);
//   }
   alt_data[0]= (float)((short)((data_bytes[1] << 8 ) | data_bytes[2])) + (float)(data_bytes[3]>>4) * 0.0625;
   temp_data[0] = ((float)((short) (data_bytes[4]))) + ((float) (data_bytes[5] >> 4)*0.0625);
//   printf("\n");
 }