Diff: PubNubDemo.cpp

Revision:

1:cac9b2960637

Parent:

0:713518ea5028

--- a/PubNubDemo.cpp	Wed Oct 01 11:39:10 2014 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,313 +0,0 @@
-#include <cstring>
-
-#include "mbed.h"
-#include "rtos.h"
-//#include "C12832.h"
-//#include "MMA7660.h"
-#include "MMA7455.h"
-#include "LM75B.h"
-
-#include "picojson.h"
-#include "PubNub.h"
-
-#include "sdram.h"
-
-//------------------------------------------------------------------------------------
-// You need to configure these cellular modem / SIM parameters.
-// These parameters are ignored for LISA-C200 variants and can be left NULL.
-//------------------------------------------------------------------------------------
-#include "MDM.h"
-//! Set your secret SIM pin here (e.g. "1234"). Check your SIM manual.
-#define SIMPIN      NULL
-/*! The APN of your network operator SIM, sometimes it is "internet" check your 
-    contract with the network operator. You can also try to look-up your settings in 
-    google: https://www.google.de/search?q=APN+list */
-#define APN         "online.telia.se"
-//! Set the user name for your APN, or NULL if not needed
-#define USERNAME    NULL
-//! Set the password for your APN, or NULL if not needed
-#define PASSWORD    NULL 
-//------------------------------------------------------------------------------------
-
-/* Demo of PubNub + the mbed application board. */
-
-/* How to get things set up: */
-/* 1. Tune in at the PubNub Developer Console, with the following
- * keys (press Subscribe afterwards): */
-const char pubkey[] = "demo";
-const char subkey[] = "demo";
-//const char channel[] = "mbed";
-const char channel_pub[] = "mbed_data";
-const char channel_sub[] = "mbed_cmd";
-/* 2. Attach your mbed board to your computer. A folder should pop up like
- * if you plug in a USB memory stick. */
-/* 3. Open this example in the mbed web IDE and hit the Compile button. */
-/* 4. A download popup with a .bin file will appear; save it in the USB
- * mbed folder. */
-/* 5. Press reset button on the mbed to start things up. */
-
-/* You will see the board publish a "status" message that shows its
- * current temperature and physical tilt.  The board's LCD should
- * print some progress messages regarding that. */
-/* You can make the board do things too, by sending messages like:
- * { "send_status": true }
- * { "lcd": "Hi there!" }
- * { "beep": true }
- * { "led": {"r": 0.5, "g": 1, "b": 0} }
- * Try it out! Paste these in the Message window and press the send icon.
- */
-
-Serial pc(USBTX, USBRX); // tx, rx
-//MMA7660 MMA(P0_27, P0_28);
-MMA7455 MMA(P0_27, P0_28);
-LM75B tmp(P0_27, P0_28, LM75B::ADDRESS_1);
-//C12832 lcd(D11, D13, D12, D7, D10);
-
-PwmOut led_r(p25); // RGB LED with 3 PWM outputs for dimmer control
-PwmOut led_g(p28);
-PwmOut led_b(p26);
-//PwmOut speaker(D6); // Speaker with PWM driver
-
-DigitalOut led1(LED1);
-DigitalOut led2(LED2);
-DigitalOut led3(LED3);
-DigitalOut led4(LED4);
-
-
-bool forceStatusUpdate = true;
-
-Mutex stdio_mutex; 
-
-#define safe_printf(...) do { \
-        stdio_mutex.lock(); \
-        pc.printf(__VA_ARGS__); \
-        stdio_mutex.unlock(); \
-    } while(0)
-
-#define safe_print_pnub_err(__prefix) do { \
-        stdio_mutex.lock(); \
-        if (pnub_err) { \
-            pc.printf("%s: ERR, code = %d, line = %d\n", (__prefix), pnub_code, pnub_line); \
-            pnub_err = false; \
-        } \
-        stdio_mutex.unlock(); \
-    } while(0)
-
-void pnub_err_handler(PubNubRes code, int line) {
-    stdio_mutex.lock();
-    if (code != PNR_OK) {
-        pc.printf("PbuNub:%d  ERROR %d\n", line, code);
-    }
-    stdio_mutex.unlock();
-}
-
-void process_msg(PubNub &pn, const char *jsonmsg)
-{
-    /* Use the picojson parser since we want to deal with complex messages.
-     * If you are short on memory, you can find an example for parsing simple
-     * JSON messages in the PubNub::subscribe() API docs. */
-    picojson::value msg;
-    std::string err = picojson::parse(msg, jsonmsg, jsonmsg + strlen(jsonmsg));
-    do {
-        if (!err.empty()) {
-            safe_printf("JSON parse: %s  \n", err.c_str());
-            break;
-        }
-    
-        if (msg.get("send_status").get<bool>()) {
-            //status_msg(pn);
-            forceStatusUpdate = true;
-            safe_printf("force_update\n");
-            break;
-        }
-        if (msg.get("lcd").is<std::string>()) {
-            safe_printf("in: %s  \n", msg.get("lcd").get<std::string>().c_str());
-            break;
-        }
-        if (msg.get("beep").is<bool>()) {
-            //speaker = msg.get("beep").get<bool>() ? 0.5 : 0;
-            break;
-        }
-        if (msg.get("led").is<picojson::object>()) {
-            picojson::value led = msg.get("led");
-            safe_printf("Old RGB { %.3f, %.3f, %.3f }\n", led_r.read(), led_g.read(), led_b.read());
-            if (led.get("r").is<double>()) led_r = 1.0 - led.get("r").get<double>();
-            if (led.get("g").is<double>()) led_g = 1.0 - led.get("g").get<double>();
-            if (led.get("b").is<double>()) led_b = 1.0 - led.get("b").get<double>();
-            safe_printf("New RGB { %.3f, %.3f, %.3f }\n", led_r.read(), led_g.read(), led_b.read());
-            break;
-        }
-    } while(0);
-}
-
-void publish_thread(void const *args)
-{
-    PubNub pn(pubkey, subkey);
-    Timer t;
-    t.start();
-    Timer tDbg;
-    int nDbg = 0;
-    float lastTemp = -3.75f;
-    while (true) {
-            
-        /* Read sensors. */
-        int m[3];
-        MMA.read(m[0], m[1], m[2]);
-        float temp = (float)tmp;
-    
-        /* Print on LCD. */
-        safe_printf("cur: mx=%3d, my=%3d, mz=%3d, t=%.2f  \n", m[0], m[1], m[2], temp);
-    
-        if (forceStatusUpdate || (temp != lastTemp)) {
-            lastTemp = temp;
-            forceStatusUpdate = false;
-            
-            /* Prepare JSON message. */
-            char jsonmsg[128];
-//            snprintf(jsonmsg, sizeof(jsonmsg),
-//                    "{\"status\":{\"mx\":%3d,\"my\":%3d,\"mz\":%3d,\"temp\":%.2f}}",
-//                    m[0], m[1], m[2], temp);
-            snprintf(jsonmsg, sizeof(jsonmsg),
-                    "%%7B%%22status%%22:%%7B%%22mx%%22:%3d,%%22my%%22:%3d,%%22mz%%22:%3d,%%22temp%%22:%.2f%%7D%%7D",
-                    m[0], m[1], m[2], temp);
-
-            /* Publish on PubNub. */
-            safe_printf("before publishing\n");
-            led_r = 0;
-            tDbg.start();
-//            PubNubRes ret = pn.publish(channel_pub, jsonmsg);
-            PubNubRes ret = pn.publish_urlenc(channel_pub, jsonmsg);
-            tDbg.stop();
-            if (++nDbg == 10) {
-                safe_printf("10 requests took %d ms, i.e %d ms/req\n", tDbg.read_ms(), tDbg.read_ms()/10);
-                tDbg.reset();
-                nDbg = 0;
-            }
-
-            if (ret != PNR_OK) {
-                safe_printf("puberr: %d  \n", ret);
-                //safe_print_pnub_err("pub");
-                forceStatusUpdate = true; // so that we can try again
-            }
-            led_r = 1;
-            safe_printf("after publishing\n");
-        }
-        
-        wait_ms(100);
-    }
-}
-
-void subscribe_thread(void const *args)
-{
-    PubNub pn(pubkey, subkey);
-    while(true) {
-        char *reply = NULL;
-        PubNubRes ret = pn.subscribe(channel_sub, &reply);
-        if (ret != PNR_OK) {
-            safe_printf("suberr: %d  \n", ret);
-            //safe_print_pnub_err("sub");
-            wait(1.0);
-            continue;
-        }
-
-        if (reply) {
-            safe_printf("recv(%s)\n", reply);
-            process_msg(pn, reply);
-        }
-
-        wait(0.5); // avoid busy loop in bad situations
-    }
-}
-
-/** Cause the mbed to flash the BLOD (Blue LEDs Of Death) sequence
- */
-void mbed_die(void)
-{
-    led1 = led2 = 1; led3 = led4 = 0;  // lights out
-    while(1) {
-        led1 = 1;
-        led3 = 1;
-        wait_ms(100);
-        led2 = 1;
-        led1 = 0;
-        wait_ms(100);
-        led4 = 0;
-        led2 = 0;
-        wait_ms(100);
-        led3 = 0;
-        led4 = 1;
-        wait_ms(100);
-    }
-}
-
-int main()
-{
-    if (sdram_init()) {
-        pc.printf("Failed to initialize SDRAM\n");
-    }
-    
-    /* For debugging, you may find it useful to print memory usage
-     * stats. AvailableMemory may be flaky, but the following is nice.
-     * It will get printed to the USB serial port interface. */
-    //printf("%d: ", __LINE__); __heapstats((__heapprt)fprintf, stdout);
-
-    /* Generate a 800Hz tone using PWM hardware output */
-    //speaker.period(1.0/800.0); // 800hz period
-    led_r = led_g = led_b = 1.0; // lights out
-    led1 = led2 = 1; led3 = led4 = 0;  // lights out
-
-    //lcd.cls();
-    //lcd.locate(0,0);
-    
-    if (!tmp.open()) {
-        pc.printf("Failed to open LM75 temperature sensor\n");
-    }
-
-//    if (!MMA.testConnection())
-//        pc.printf("MMA error  \n");
-
-    // Initialize the accelerometer
-    if (!MMA.setMode(MMA7455::ModeMeasurement)) {
-        printf("Unable to set mode for MMA7455!\n");
-    }
-
-    // Calibrate it. It does not matter if it is on a level surface
-    // as this test is only interested in relative values.
-    if (!MMA.calibrate()) {
-        printf("Failed to calibrate MMA7455!\n");
-    }
-
-    MDMRtos<MDMSerial> mdm;
-    //mdm.setDebug(4); // enable this for debugging issues 
-    int i;
-    for (i = 1; i <= 10; i++) {
-        if (mdm.connect(SIMPIN, APN,USERNAME,PASSWORD)) {
-            printf("Connected\n");
-            mdm.setDebug(0); // disable debug again
-            break;
-        } else {
-            printf("Attempt %2d to connect to the modem FAILED.\n", i);
-            wait(1);
-            mdm.setDebug(min(i, 4)); // to add more and more debug output
-        }
-    }
-    if (i > 10) {
-        printf("Failed to connect to the modem\n");
-        mbed_die();
-    }
-    
-    forceStatusUpdate = true;
-    //status_msg(pn);
-    // lcd.printf("pub... ");
-
-    Thread t_p(publish_thread);
-    Thread t_s(subscribe_thread);
-
-    while (1) {
-        Thread::wait(2000);
-        safe_printf(".\n");
-    }
-
-    mdm.disconnect();
-    mdm.powerOff();
-}