Revision 0:c0fbef1ae93c, committed 2013-06-16

Comitter:

robt

Date:

Sun Jun 16 15:42:27 2013 +0000

Commit message:

by Rob Toulson and Tim Wilmshurst from textbook "Fast and Effective Embedded Systems Design: Applying the ARM mbed"

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Sun Jun 16 15:42:27 2013 +0000
@@ -0,0 +1,34 @@
+/* Program Example 14.6: Explore ADC conversion times, programming control registers directly. ADC value is transferred to DAC, while an output pin is strobed to indicate conversion duration. Observe on oscilloscope
+                                                                            */
+//….
+//….
+
+int main() {
+  FIO2DIR0=0xFF;                      // set lower bits port 2 to output
+  PINSEL1=0x00210000;  //set bits 21-20 to 10 for analog output (mbed p18) 
+         //and bits 17-16 to 01 to enable ADC channel 1 (AD0.1, mbed pin 16)
+
+//initialise the ADC. 
+//….
+//….
+  while(1){         // infinite loop
+    // start A/D conversion by modifying bits in the AD0CR register 
+    AD0CR &= (AD0CR & 0xFFFFFF00);  
+    FIO2PIN0 |= 0x01;               // OR bit 0 with 1 to set pin high
+    AD0CR |= (1 << ADC_channel) | (1 << 24);       
+    // wait for it to finish by polling the ADC DONE bit         
+    while((AD0GDR & 0x80000000) == 0) {
+    }
+    FIO2PIN0 &= ~0x01;             // AND bit 0 with 0 to set pin low
+
+    ADCdata = AD0GDR;              // get the data from AD0GDR
+    AD0CR &= 0xF8FFFFFF;           //stop ADC by setting START bits to zero
+        
+   // shift data 4 bits to right justify, and 2 more to give 10-bit ADC value
+    ADCdata=(ADCdata>>6)&0x03FF;   //and mask      
+    DACR=(ADCdata<<6);     //could be merged with previous line,
+                              // but separated for clarity
+    //delay();               //insert delay if wished
+  }
+}
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Sun Jun 16 15:42:27 2013 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/b3110cd2dd17
\ No newline at end of file