Temp Fork
Dependencies: MMA8451Q Multi_WS2811 NVIC_set_all_priorities TSI cc3000_hostdriver_mbedsocket mbed
Fork of CubicHand by
main.cpp
- Committer:
- kalbers
- Date:
- 2014-12-01
- Revision:
- 1:587189fb6d87
- Child:
- 3:5f5d75cba8e1
File content as of revision 1:587189fb6d87:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include "mbed.h" #include "cc3000.h" #include "main.h" #include "MMA8451Q.h" #include "TSISensor.h" #include "TCPSocketConnection.h" #include "TCPSocketServer.h" using namespace mbed_cc3000; //#define SSID "wifiisawesome" //#define PASSWORD "A915FA24" #define SSID "CubeNet" #define PASSWORD "modelbased" #define MMA8451_I2C_ADDRESS (0x1d<<1) /* cc3000 module declaration specific for user's board. Check also init() #if (MY_BOARD == WIGO) cc3000 wifi(PTA16, PTA13, PTD0, SPI(PTD2, PTD3, PTC5), SSID, PASSWORD, WPA2, false); Serial pc(USBTX, USBRX); #elif (MY_BOARD == WIFI_DIPCORTEX) cc3000 wifi(p28, p27, p30, SPI(p21, p14, p37), SSID, PASSWORD, WPA2, false); Serial pc(UART_TX, UART_RX); #elif (MY_BOARD == MBED_BOARD_EXAMPLE) cc3000 wifi(p9, p10, p8, SPI(p5, p6, p7), SSID, PASSWORD, WPA2, false); Serial pc(USBTX, USBRX); #else #endif */ cc3000 wifi(PTD4, PTC9, PTD0, SPI(PTD2, PTD3, PTD1), SSID, PASSWORD, WPA2, false); Serial pc(USBTX, USBRX); MMA8451Q accelerometer(PTE25, PTE24, MMA8451_I2C_ADDRESS); TSISensor touchSensor; /** * \brief TCP client demo * \param none * \return int */ int main() { float data[4]; init(); /* board dependent init */ pc.baud(115200); printf("cc3000 tcp client demo. \r\n"); wifi.init(); if (wifi.connect() == -1) { printf("Failed to connect. Please verify connection details and try again. \r\n"); } else { printf("IP address: %s \r\n", wifi.getIPAddress()); } const char* ECHO_SERVER_ADDRESS = "192.168.1.33"; const int ECHO_SERVER_PORT = 2000; TCPSocketConnection socket; while (socket.connect(ECHO_SERVER_ADDRESS, ECHO_SERVER_PORT) < 0) { printf("Unable to connect to (%s) on port (%d) \r\n", ECHO_SERVER_ADDRESS, ECHO_SERVER_PORT); wait(1); } socket.set_blocking(true); printf("Connected!\r\n"); char sendb[50]; sendb[0] = '$'; sendb[1] = 0x0A; sendb[2] = 0x03; sendb[3] = 3; sendb[4] = (sendb[0]+sendb[1]+sendb[2]+sendb[3])%256; sendb[5] = '#'; socket.send(sendb, 6); printf("Sent!\r\n"); char Buf[100]; while(true) { int numReceived = 5; //accelerometer.getAccAllAxis(data); //data[3] = touchSensor.readPercentage(); //socket.send_all((char*)data, 4*sizeof(float)); //wait(0.2); numReceived = socket.receive(Buf, 99); if(numReceived > 0 && Buf[0] == '$') printf("Accel: %d\r\n", ((int16_t *)Buf)[33]); } socket.close(); printf("Completed. \r\n"); wifi.disconnect(); }