Ricardo Benitez
meh
Fork of
mbed
by 
mbed official
Revision 101:7cff1c4259d7, committed 2015-06-09
- Comitter:
- Kojto
- Date:
- Tue Jun 09 14:29:26 2015 +0100
- Parent:
- 100:cbbeb26dbd92
- Child:
- 102:da0ca467f8b5
- Commit message:
- Release 101 of the mbed library
Changes:
- new platform: APPNEARME_MICRONFCBOARD, MTS_DRAGONFLY_F411RE, MAX32600MBED, WIZwiki_W7500
- Silabs memory optimization in gpio, pwm fixes
- SPI - ssel documentation fixes and its use
Changed in this revision
--- a/CircularBuffer.h Wed May 27 08:07:35 2015 +0100
+++ b/CircularBuffer.h Tue Jun 09 14:29:26 2015 +0100
@@ -88,9 +88,9 @@
private:
T _pool[BufferSize];
- CounterType _head;
- CounterType _tail;
- bool _full;
+ volatile CounterType _head;
+ volatile CounterType _tail;
+ volatile bool _full;
};
}
--- a/SPI.h Wed May 27 08:07:35 2015 +0100
+++ b/SPI.h Tue Jun 09 14:29:26 2015 +0100
@@ -45,10 +45,21 @@
*
* #include "mbed.h"
*
+ * // hardware ssel (where applicable)
+ * //SPI device(p5, p6, p7, p8); // mosi, miso, sclk, ssel
+ *
+ * // software ssel
* SPI device(p5, p6, p7); // mosi, miso, sclk
+ * DigitalOut cs(p8); // ssel
*
* int main() {
+ * // hardware ssel (where applicable)
+ * //int response = device.write(0xFF);
+ *
+ * // software ssel
+ * cs = 0;
* int response = device.write(0xFF);
+ * cs = 1;
* }
* @endcode
*/
@@ -58,16 +69,14 @@
/** Create a SPI master connected to the specified pins
*
- * Pin Options:
- * (5, 6, 7) or (11, 12, 13)
- *
* mosi or miso can be specfied as NC if not used
*
* @param mosi SPI Master Out, Slave In pin
* @param miso SPI Master In, Slave Out pin
* @param sclk SPI Clock pin
+ * @param ssel SPI chip select pin
*/
- SPI(PinName mosi, PinName miso, PinName sclk, PinName _unused=NC);
+ SPI(PinName mosi, PinName miso, PinName sclk, PinName ssel=NC);
/** Configure the data transmission format
*
--- a/SPISlave.h Wed May 27 08:07:35 2015 +0100
+++ b/SPISlave.h Tue Jun 09 14:29:26 2015 +0100
@@ -54,16 +54,12 @@
/** Create a SPI slave connected to the specified pins
*
- * Pin Options:
- * (5, 6, 7i, 8) or (11, 12, 13, 14)
- *
* mosi or miso can be specfied as NC if not used
*
* @param mosi SPI Master Out, Slave In pin
* @param miso SPI Master In, Slave Out pin
* @param sclk SPI Clock pin
* @param ssel SPI chip select pin
- * @param name (optional) A string to identify the object
*/
SPISlave(PinName mosi, PinName miso, PinName sclk, PinName ssel);
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_APPNEARME_MICRONFCBOARD/LPC11Uxx.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,670 @@
+
+/****************************************************************************************************//**
+ * @file LPC11Uxx.h
+ *
+ *
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File for
+ * default LPC11Uxx Device Series
+ *
+ * @version V0.1
+ * @date 21. March 2011
+ *
+ * @note Generated with SFDGen V2.6 Build 3j (beta) on Thursday, 17.03.2011 13:19:45
+ *
+ * from CMSIS SVD File 'LPC11U1x_svd.xml' Version 0.1,
+ * created on Wednesday, 16.03.2011 20:30:42, last modified on Thursday, 17.03.2011 20:19:40
+ *
+ *******************************************************************************************************/
+
+// ################################################################################
+// Minor fix 8 April 2011 - changed LPC_CT32B1_BASE from 0x40014000 to 0x40018000
+// ################################################################################
+
+/** @addtogroup NXP
+ * @{
+ */
+
+/** @addtogroup LPC11Uxx
+ * @{
+ */
+
+#ifndef __LPC11UXX_H__
+#define __LPC11UXX_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+#if defined ( __CC_ARM )
+ #pragma anon_unions
+#endif
+
+ /* Interrupt Number Definition */
+
+typedef enum {
+// ------------------------- Cortex-M0 Processor Exceptions Numbers -----------------------------
+ Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset */
+ NonMaskableInt_IRQn = -14, /*!< 2 Non maskable Interrupt, cannot be stopped or preempted */
+ HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */
+ SVCall_IRQn = -5, /*!< 11 System Service Call via SVC instruction */
+ DebugMonitor_IRQn = -4, /*!< 12 Debug Monitor */
+ PendSV_IRQn = -2, /*!< 14 Pendable request for system service */
+ SysTick_IRQn = -1, /*!< 15 System Tick Timer */
+// --------------------------- LPC11Uxx Specific Interrupt Numbers ------------------------------
+FLEX_INT0_IRQn = 0, /*!< All I/O pins can be routed to below 8 interrupts. */
+ FLEX_INT1_IRQn = 1,
+ FLEX_INT2_IRQn = 2,
+ FLEX_INT3_IRQn = 3,
+ FLEX_INT4_IRQn = 4,
+ FLEX_INT5_IRQn = 5,
+ FLEX_INT6_IRQn = 6,
+ FLEX_INT7_IRQn = 7,
+ GINT0_IRQn = 8, /*!< Grouped Interrupt 0 */
+ GINT1_IRQn = 9, /*!< Grouped Interrupt 1 */
+ Reserved0_IRQn = 10, /*!< Reserved Interrupt */
+ Reserved1_IRQn = 11,
+ Reserved2_IRQn = 12,
+ Reserved3_IRQn = 13,
+ SSP1_IRQn = 14, /*!< SSP1 Interrupt */
+ I2C_IRQn = 15, /*!< I2C Interrupt */
+ TIMER_16_0_IRQn = 16, /*!< 16-bit Timer0 Interrupt */
+ TIMER_16_1_IRQn = 17, /*!< 16-bit Timer1 Interrupt */
+ TIMER_32_0_IRQn = 18, /*!< 32-bit Timer0 Interrupt */
+ TIMER_32_1_IRQn = 19, /*!< 32-bit Timer1 Interrupt */
+ SSP0_IRQn = 20, /*!< SSP0 Interrupt */
+ UART_IRQn = 21, /*!< UART Interrupt */
+ USB_IRQn = 22, /*!< USB IRQ Interrupt */
+ USB_FIQn = 23, /*!< USB FIQ Interrupt */
+ ADC_IRQn = 24, /*!< A/D Converter Interrupt */
+ WDT_IRQn = 25, /*!< Watchdog timer Interrupt */
+ BOD_IRQn = 26, /*!< Brown Out Detect(BOD) Interrupt */
+ FMC_IRQn = 27, /*!< Flash Memory Controller Interrupt */
+ Reserved4_IRQn = 28, /*!< Reserved Interrupt */
+ Reserved5_IRQn = 29, /*!< Reserved Interrupt */
+ USBWakeup_IRQn = 30, /*!< USB wakeup Interrupt */
+ Reserved6_IRQn = 31, /*!< Reserved Interrupt */
+} IRQn_Type;
+
+
+/** @addtogroup Configuration_of_CMSIS
+ * @{
+ */
+
+/* Processor and Core Peripheral Section */ /* Configuration of the Cortex-M0 Processor and Core Peripherals */
+
+#define __MPU_PRESENT 0 /*!< MPU present or not */
+#define __NVIC_PRIO_BITS 3 /*!< Number of Bits used for Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+/** @} */ /* End of group Configuration_of_CMSIS */
+
+#include "core_cm0.h" /*!< Cortex-M0 processor and core peripherals */
+#include "system_LPC11Uxx.h" /*!< LPC11Uxx System */
+
+/** @addtogroup Device_Peripheral_Registers
+ * @{
+ */
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- I2C -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x I2C-bus controller Modification date=3/16/2011 Major revision=0 Minor revision=3 (I2C)
+ */
+
+typedef struct { /*!< (@ 0x40000000) I2C Structure */
+ __IO uint32_t CONSET; /*!< (@ 0x40000000) I2C Control Set Register */
+ __I uint32_t STAT; /*!< (@ 0x40000004) I2C Status Register */
+ __IO uint32_t DAT; /*!< (@ 0x40000008) I2C Data Register. */
+ __IO uint32_t ADR0; /*!< (@ 0x4000000C) I2C Slave Address Register 0 */
+ __IO uint32_t SCLH; /*!< (@ 0x40000010) SCH Duty Cycle Register High Half Word */
+ __IO uint32_t SCLL; /*!< (@ 0x40000014) SCL Duty Cycle Register Low Half Word */
+ __IO uint32_t CONCLR; /*!< (@ 0x40000018) I2C Control Clear Register*/
+ __IO uint32_t MMCTRL; /*!< (@ 0x4000001C) Monitor mode control register*/
+ __IO uint32_t ADR1; /*!< (@ 0x40000020) I2C Slave Address Register 1*/
+ __IO uint32_t ADR2; /*!< (@ 0x40000024) I2C Slave Address Register 2*/
+ __IO uint32_t ADR3; /*!< (@ 0x40000028) I2C Slave Address Register 3*/
+ __I uint32_t DATA_BUFFER; /*!< (@ 0x4000002C) Data buffer register */
+union{
+ __IO uint32_t MASK[4]; /*!< (@ 0x40000030) I2C Slave address mask register */
+ struct{
+ __IO uint32_t MASK0;
+ __IO uint32_t MASK1;
+ __IO uint32_t MASK2;
+ __IO uint32_t MASK3;
+ };
+ };
+} LPC_I2C_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- WWDT -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x Windowed Watchdog Timer (WWDT) Modification date=3/16/2011 Major revision=0 Minor revision=3 (WWDT)
+ */
+
+typedef struct { /*!< (@ 0x40004000) WWDT Structure */
+ __IO uint32_t MOD; /*!< (@ 0x40004000) Watchdog mode register*/
+ __IO uint32_t TC; /*!< (@ 0x40004004) Watchdog timer constant register */
+ __IO uint32_t FEED; /*!< (@ 0x40004008) Watchdog feed sequence register */
+ __I uint32_t TV; /*!< (@ 0x4000400C) Watchdog timer value register */
+ __IO uint32_t CLKSEL; /*!< (@ 0x40004010) Watchdog clock select register. */
+ __IO uint32_t WARNINT; /*!< (@ 0x40004014) Watchdog Warning Interrupt compare value. */
+ __IO uint32_t WINDOW; /*!< (@ 0x40004018) Watchdog Window compare value. */
+} LPC_WWDT_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- USART -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x USART Modification date=3/16/2011 Major revision=0 Minor revision=3 (USART)
+ */
+
+typedef struct { /*!< (@ 0x40008000) USART Structure */
+
+ union {
+ __IO uint32_t DLL; /*!< (@ 0x40008000) Divisor Latch LSB. Least significant byte of the baud rate divisor value. The full divisor is used to generate a baud rate from the fractional rate divider. (DLAB=1) */
+ __O uint32_t THR; /*!< (@ 0x40008000) Transmit Holding Register. The next character to be transmitted is written here. (DLAB=0) */
+ __I uint32_t RBR; /*!< (@ 0x40008000) Receiver Buffer Register. Contains the next received character to be read. (DLAB=0) */
+ };
+
+ union {
+ __IO uint32_t IER; /*!< (@ 0x40008004) Interrupt Enable Register. Contains individual interrupt enable bits for the 7 potential USART interrupts. (DLAB=0) */
+ __IO uint32_t DLM; /*!< (@ 0x40008004) Divisor Latch MSB. Most significant byte of the baud rate divisor value. The full divisor is used to generate a baud rate from the fractional rate divider. (DLAB=1) */
+ };
+
+ union {
+ __O uint32_t FCR; /*!< (@ 0x40008008) FIFO Control Register. Controls USART FIFO usage and modes. */
+ __I uint32_t IIR; /*!< (@ 0x40008008) Interrupt ID Register. Identifies which interrupt(s) are pending. */
+ };
+ __IO uint32_t LCR; /*!< (@ 0x4000800C) Line Control Register. Contains controls for frame formatting and break generation. */
+ __IO uint32_t MCR; /*!< (@ 0x40008010) Modem Control Register. */
+ __I uint32_t LSR; /*!< (@ 0x40008014) Line Status Register. Contains flags for transmit and receive status, including line errors. */
+ __I uint32_t MSR; /*!< (@ 0x40008018) Modem Status Register. */
+ __IO uint32_t SCR; /*!< (@ 0x4000801C) Scratch Pad Register. Eight-bit temporary storage for software. */
+ __IO uint32_t ACR; /*!< (@ 0x40008020) Auto-baud Control Register. Contains controls for the auto-baud feature. */
+ __IO uint32_t ICR; /*!< (@ 0x40008024) IrDA Control Register. Enables and configures the IrDA (remote control) mode. */
+ __IO uint32_t FDR; /*!< (@ 0x40008028) Fractional Divider Register. Generates a clock input for the baud rate divider. */
+ __IO uint32_t OSR; /*!< (@ 0x4000802C) Oversampling Register. Controls the degree of oversampling during each bit time. */
+ __IO uint32_t TER; /*!< (@ 0x40008030) Transmit Enable Register. Turns off USART transmitter for use with software flow control. */
+ __I uint32_t RESERVED0[3];
+ __IO uint32_t HDEN; /*!< (@ 0x40008040) Half duplex enable register. */
+ __I uint32_t RESERVED1;
+ __IO uint32_t SCICTRL; /*!< (@ 0x40008048) Smart Card Interface Control register. Enables and configures the Smart Card Interface feature. */
+ __IO uint32_t RS485CTRL; /*!< (@ 0x4000804C) RS-485/EIA-485 Control. Contains controls to configure various aspects of RS-485/EIA-485 modes. */
+ __IO uint32_t RS485ADRMATCH; /*!< (@ 0x40008050) RS-485/EIA-485 address match. Contains the address match value for RS-485/EIA-485 mode. */
+ __IO uint32_t RS485DLY; /*!< (@ 0x40008054) RS-485/EIA-485 direction control delay. */
+ __IO uint32_t SYNCCTRL;
+} LPC_USART_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- Timer -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x 32-bitcounter/timers CT32B0/1 Modification date=3/16/2011 Major revision=0 Minor revision=3
+ */
+
+typedef struct { /*!< (@ 0x40014000) CT32B0 Structure */
+ __IO uint32_t IR; /*!< (@ 0x40014000) Interrupt Register */
+ __IO uint32_t TCR; /*!< (@ 0x40014004) Timer Control Register */
+ __IO uint32_t TC; /*!< (@ 0x40014008) Timer Counter */
+ __IO uint32_t PR; /*!< (@ 0x4001400C) Prescale Register */
+ __IO uint32_t PC; /*!< (@ 0x40014010) Prescale Counter */
+ __IO uint32_t MCR; /*!< (@ 0x40014014) Match Control Register */
+ union {
+ __IO uint32_t MR[4]; /*!< (@ 0x40014018) Match Register */
+ struct{
+ __IO uint32_t MR0; /*!< (@ 0x40018018) Match Register. MR0 */
+ __IO uint32_t MR1; /*!< (@ 0x4001801C) Match Register. MR1 */
+ __IO uint32_t MR2; /*!< (@ 0x40018020) Match Register. MR2 */
+ __IO uint32_t MR3; /*!< (@ 0x40018024) Match Register. MR3 */
+ };
+ };
+ __IO uint32_t CCR; /*!< (@ 0x40014028) Capture Control Register */
+ union{
+ __I uint32_t CR[4]; /*!< (@ 0x4001402C) Capture Register */
+ struct{
+ __I uint32_t CR0; /*!< (@ 0x4001802C) Capture Register. CR 0 */
+ __I uint32_t CR1; /*!< (@ 0x40018030) Capture Register. CR 1 */
+ __I uint32_t CR2; /*!< (@ 0x40018034) Capture Register. CR 2 */
+ __I uint32_t CR3; /*!< (@ 0x40018038) Capture Register. CR 3 */
+ };
+ };
+__IO uint32_t EMR; /*!< (@ 0x4001403C) External Match Register */
+ __I uint32_t RESERVED0[12];
+ __IO uint32_t CTCR; /*!< (@ 0x40014070) Count Control Register */
+ __IO uint32_t PWMC; /*!< (@ 0x40014074) PWM Control Register */
+} LPC_CTxxBx_Type;
+
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- ADC -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x ADC Modification date=3/16/2011 Major revision=0 Minor revision=3 (ADC)
+ */
+
+typedef struct { /*!< (@ 0x4001C000) ADC Structure */
+ __IO uint32_t CR; /*!< (@ 0x4001C000) A/D Control Register */
+ __IO uint32_t GDR; /*!< (@ 0x4001C004) A/D Global Data Register */
+ __I uint32_t RESERVED0[1];
+ __IO uint32_t INTEN; /*!< (@ 0x4001C00C) A/D Interrupt Enable Register */
+ union{
+ __I uint32_t DR[8]; /*!< (@ 0x4001C010) A/D Channel Data Register*/
+ struct{
+ __IO uint32_t DR0; /*!< (@ 0x40020010) A/D Channel Data Register 0*/
+ __IO uint32_t DR1; /*!< (@ 0x40020014) A/D Channel Data Register 1*/
+ __IO uint32_t DR2; /*!< (@ 0x40020018) A/D Channel Data Register 2*/
+ __IO uint32_t DR3; /*!< (@ 0x4002001C) A/D Channel Data Register 3*/
+ __IO uint32_t DR4; /*!< (@ 0x40020020) A/D Channel Data Register 4*/
+ __IO uint32_t DR5; /*!< (@ 0x40020024) A/D Channel Data Register 5*/
+ __IO uint32_t DR6; /*!< (@ 0x40020028) A/D Channel Data Register 6*/
+ __IO uint32_t DR7; /*!< (@ 0x4002002C) A/D Channel Data Register 7*/
+ };
+ };
+ __I uint32_t STAT; /*!< (@ 0x4001C030) A/D Status Register. */
+} LPC_ADC_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- PMU -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x Power Management Unit (PMU) Modification date=3/16/2011 Major revision=0 Minor revision=3 (PMU)
+ */
+
+typedef struct { /*!< (@ 0x40038000) PMU Structure */
+ __IO uint32_t PCON; /*!< (@ 0x40038000) Power control register */
+ union{
+ __IO uint32_t GPREG[4]; /*!< (@ 0x40038004) General purpose register 0 */
+ struct{
+ __IO uint32_t GPREG0; /*!< (@ 0x40038004) General purpose register 0 */
+ __IO uint32_t GPREG1; /*!< (@ 0x40038008) General purpose register 1 */
+ __IO uint32_t GPREG2; /*!< (@ 0x4003800C) General purpose register 2 */
+ __IO uint32_t GPREG3; /*!< (@ 0x40038010) General purpose register 3 */
+ };
+ };
+} LPC_PMU_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- FLASHCTRL -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x Flash programming firmware Modification date=3/17/2011 Major revision=0 Minor revision=3 (FLASHCTRL)
+ */
+
+typedef struct { /*!< (@ 0x4003C000) FLASHCTRL Structure */
+ __I uint32_t RESERVED0[4];
+ __IO uint32_t FLASHCFG; /*!< (@ 0x4003C010) Flash memory access time configuration register */
+ __I uint32_t RESERVED1[3];
+ __IO uint32_t FMSSTART; /*!< (@ 0x4003C020) Signature start address register */
+ __IO uint32_t FMSSTOP; /*!< (@ 0x4003C024) Signature stop-address register */
+ __I uint32_t RESERVED2[1];
+ __I uint32_t FMSW0; /*!< (@ 0x4003C02C) Word 0 [31:0] */
+ __I uint32_t FMSW1; /*!< (@ 0x4003C030) Word 1 [63:32] */
+ __I uint32_t FMSW2; /*!< (@ 0x4003C034) Word 2 [95:64] */
+ __I uint32_t FMSW3; /*!< (@ 0x4003C038) Word 3 [127:96] */
+ __I uint32_t RESERVED3[1001];
+ __I uint32_t FMSTAT; /*!< (@ 0x4003CFE0) Signature generation status register */
+ __I uint32_t RESERVED4[1];
+ __IO uint32_t FMSTATCLR; /*!< (@ 0x4003CFE8) Signature generation status clear register */
+} LPC_FLASHCTRL_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- SSP0/1 -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x SSP/SPI Modification date=3/16/2011 Major revision=0 Minor revision=3 (SSP0)
+ */
+
+typedef struct { /*!< (@ 0x40040000) SSP0 Structure */
+ __IO uint32_t CR0; /*!< (@ 0x40040000) Control Register 0. Selects the serial clock rate, bus type, and data size. */
+ __IO uint32_t CR1; /*!< (@ 0x40040004) Control Register 1. Selects master/slave and other modes. */
+ __IO uint32_t DR; /*!< (@ 0x40040008) Data Register. Writes fill the transmit FIFO, and reads empty the receive FIFO. */
+ __I uint32_t SR; /*!< (@ 0x4004000C) Status Register */
+ __IO uint32_t CPSR; /*!< (@ 0x40040010) Clock Prescale Register */
+ __IO uint32_t IMSC; /*!< (@ 0x40040014) Interrupt Mask Set and Clear Register */
+ __I uint32_t RIS; /*!< (@ 0x40040018) Raw Interrupt Status Register */
+ __I uint32_t MIS; /*!< (@ 0x4004001C) Masked Interrupt Status Register */
+ __IO uint32_t ICR; /*!< (@ 0x40040020) SSPICR Interrupt Clear Register */
+} LPC_SSPx_Type;
+
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- IOCONFIG -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x I/O configuration Modification date=3/16/2011 Major revision=0 Minor revision=3 (IOCONFIG)
+ */
+
+typedef struct { /*!< (@ 0x40044000) IOCONFIG Structure */
+ __IO uint32_t RESET_PIO0_0; /*!< (@ 0x40044000) I/O configuration for pin RESET/PIO0_0 */
+ __IO uint32_t PIO0_1; /*!< (@ 0x40044004) I/O configuration for pin PIO0_1/CLKOUT/CT32B0_MAT2/USB_FTOGGLE */
+ __IO uint32_t PIO0_2; /*!< (@ 0x40044008) I/O configuration for pin PIO0_2/SSEL0/CT16B0_CAP0 */
+ __IO uint32_t PIO0_3; /*!< (@ 0x4004400C) I/O configuration for pin PIO0_3/USB_VBUS */
+ __IO uint32_t PIO0_4; /*!< (@ 0x40044010) I/O configuration for pin PIO0_4/SCL */
+ __IO uint32_t PIO0_5; /*!< (@ 0x40044014) I/O configuration for pin PIO0_5/SDA */
+ __IO uint32_t PIO0_6; /*!< (@ 0x40044018) I/O configuration for pin PIO0_6/USB_CONNECT/SCK0 */
+ __IO uint32_t PIO0_7; /*!< (@ 0x4004401C) I/O configuration for pin PIO0_7/CTS */
+ __IO uint32_t PIO0_8; /*!< (@ 0x40044020) I/O configuration for pin PIO0_8/MISO0/CT16B0_MAT0 */
+ __IO uint32_t PIO0_9; /*!< (@ 0x40044024) I/O configuration for pin PIO0_9/MOSI0/CT16B0_MAT1 */
+ __IO uint32_t SWCLK_PIO0_10; /*!< (@ 0x40044028) I/O configuration for pin SWCLK/PIO0_10/ SCK0/CT16B0_MAT2 */
+ __IO uint32_t TDI_PIO0_11; /*!< (@ 0x4004402C) I/O configuration for pin TDI/PIO0_11/AD0/CT32B0_MAT3 */
+ __IO uint32_t TMS_PIO0_12; /*!< (@ 0x40044030) I/O configuration for pin TMS/PIO0_12/AD1/CT32B1_CAP0 */
+ __IO uint32_t TDO_PIO0_13; /*!< (@ 0x40044034) I/O configuration for pin TDO/PIO0_13/AD2/CT32B1_MAT0 */
+ __IO uint32_t TRST_PIO0_14; /*!< (@ 0x40044038) I/O configuration for pin TRST/PIO0_14/AD3/CT32B1_MAT1 */
+ __IO uint32_t SWDIO_PIO0_15; /*!< (@ 0x4004403C) I/O configuration for pin SWDIO/PIO0_15/AD4/CT32B1_MAT2 */
+ __IO uint32_t PIO0_16; /*!< (@ 0x40044040) I/O configuration for pin PIO0_16/AD5/CT32B1_MAT3/ WAKEUP */
+ __IO uint32_t PIO0_17; /*!< (@ 0x40044044) I/O configuration for pin PIO0_17/RTS/CT32B0_CAP0/SCLK */
+ __IO uint32_t PIO0_18; /*!< (@ 0x40044048) I/O configuration for pin PIO0_18/RXD/CT32B0_MAT0 */
+ __IO uint32_t PIO0_19; /*!< (@ 0x4004404C) I/O configuration for pin PIO0_19/TXD/CT32B0_MAT1 */
+ __IO uint32_t PIO0_20; /*!< (@ 0x40044050) I/O configuration for pin PIO0_20/CT16B1_CAP0 */
+ __IO uint32_t PIO0_21; /*!< (@ 0x40044054) I/O configuration for pin PIO0_21/CT16B1_MAT0/MOSI1 */
+ __IO uint32_t PIO0_22; /*!< (@ 0x40044058) I/O configuration for pin PIO0_22/AD6/CT16B1_MAT1/MISO1 */
+ __IO uint32_t PIO0_23; /*!< (@ 0x4004405C) I/O configuration for pin PIO0_23/AD7 */
+ __IO uint32_t PIO1_0; /*!< Offset: 0x060 */
+ __IO uint32_t PIO1_1;
+ __IO uint32_t PIO1_2;
+ __IO uint32_t PIO1_3;
+ __IO uint32_t PIO1_4; /*!< Offset: 0x070 */
+ __IO uint32_t PIO1_5; /*!< (@ 0x40044074) I/O configuration for pin PIO1_5/CT32B1_CAP1 */
+ __IO uint32_t PIO1_6;
+ __IO uint32_t PIO1_7;
+ __IO uint32_t PIO1_8; /*!< Offset: 0x080 */
+ __IO uint32_t PIO1_9;
+ __IO uint32_t PIO1_10;
+ __IO uint32_t PIO1_11;
+ __IO uint32_t PIO1_12; /*!< Offset: 0x090 */
+ __IO uint32_t PIO1_13; /*!< (@ 0x40044094) I/O configuration for pin PIO1_13/DTR/CT16B0_MAT0/TXD */
+ __IO uint32_t PIO1_14; /*!< (@ 0x40044098) I/O configuration for pin PIO1_14/DSR/CT16B0_MAT1/RXD */
+ __IO uint32_t PIO1_15; /*!< (@ 0x4004409C) I/O configuration for pin PIO1_15/DCD/ CT16B0_MAT2/SCK1 */
+ __IO uint32_t PIO1_16; /*!< (@ 0x400440A0) I/O configuration for pin PIO1_16/RI/CT16B0_CAP0 */
+ __IO uint32_t PIO1_17;
+ __IO uint32_t PIO1_18;
+ __IO uint32_t PIO1_19; /*!< (@ 0x400440AC) I/O configuration for pin PIO1_19/DTR/SSEL1 */
+ __IO uint32_t PIO1_20; /*!< (@ 0x400440B0) I/O configuration for pin PIO1_20/DSR/SCK1 */
+ __IO uint32_t PIO1_21; /*!< (@ 0x400440B4) I/O configuration for pin PIO1_21/DCD/MISO1 */
+ __IO uint32_t PIO1_22; /*!< (@ 0x400440B8) I/O configuration for pin PIO1_22/RI/MOSI1 */
+ __IO uint32_t PIO1_23; /*!< (@ 0x400440BC) I/O configuration for pin PIO1_23/CT16B1_MAT1/SSEL1 */
+ __IO uint32_t PIO1_24; /*!< (@ 0x400440C0) I/O configuration for pin PIO1_24/ CT32B0_MAT0 */
+ __IO uint32_t PIO1_25; /*!< (@ 0x400440C4) I/O configuration for pin PIO1_25/CT32B0_MAT1 */
+ __IO uint32_t PIO1_26; /*!< (@ 0x400440C8) I/O configuration for pin PIO1_26/CT32B0_MAT2/ RXD */
+ __IO uint32_t PIO1_27; /*!< (@ 0x400440CC) I/O configuration for pin PIO1_27/CT32B0_MAT3/ TXD */
+ __IO uint32_t PIO1_28; /*!< (@ 0x400440D0) I/O configuration for pin PIO1_28/CT32B0_CAP0/ SCLK */
+ __IO uint32_t PIO1_29; /*!< (@ 0x400440D4) I/O configuration for pin PIO1_29/SCK0/ CT32B0_CAP1 */
+ __IO uint32_t PIO1_30;
+ __IO uint32_t PIO1_31; /*!< (@ 0x400440DC) I/O configuration for pin PIO1_31 */
+} LPC_IOCON_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- SYSCON -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x System control block Modification date=3/16/2011 Major revision=0 Minor revision=3 (SYSCON)
+ */
+
+typedef struct { /*!< (@ 0x40048000) SYSCON Structure */
+ __IO uint32_t SYSMEMREMAP; /*!< (@ 0x40048000) System memory remap */
+ __IO uint32_t PRESETCTRL; /*!< (@ 0x40048004) Peripheral reset control */
+ __IO uint32_t SYSPLLCTRL; /*!< (@ 0x40048008) System PLL control */
+ __I uint32_t SYSPLLSTAT; /*!< (@ 0x4004800C) System PLL status */
+ __IO uint32_t USBPLLCTRL; /*!< (@ 0x40048010) USB PLL control */
+ __I uint32_t USBPLLSTAT; /*!< (@ 0x40048014) USB PLL status */
+ __I uint32_t RESERVED0[2];
+ __IO uint32_t SYSOSCCTRL; /*!< (@ 0x40048020) System oscillator control */
+ __IO uint32_t WDTOSCCTRL; /*!< (@ 0x40048024) Watchdog oscillator control */
+ __I uint32_t RESERVED1[2];
+ __IO uint32_t SYSRSTSTAT; /*!< (@ 0x40048030) System reset status register */
+ __I uint32_t RESERVED2[3];
+ __IO uint32_t SYSPLLCLKSEL; /*!< (@ 0x40048040) System PLL clock source select */
+ __IO uint32_t SYSPLLCLKUEN; /*!< (@ 0x40048044) System PLL clock source update enable */
+ __IO uint32_t USBPLLCLKSEL; /*!< (@ 0x40048048) USB PLL clock source select */
+ __IO uint32_t USBPLLCLKUEN; /*!< (@ 0x4004804C) USB PLL clock source update enable */
+ __I uint32_t RESERVED3[8];
+ __IO uint32_t MAINCLKSEL; /*!< (@ 0x40048070) Main clock source select */
+ __IO uint32_t MAINCLKUEN; /*!< (@ 0x40048074) Main clock source update enable */
+ __IO uint32_t SYSAHBCLKDIV; /*!< (@ 0x40048078) System clock divider */
+ __I uint32_t RESERVED4[1];
+ __IO uint32_t SYSAHBCLKCTRL; /*!< (@ 0x40048080) System clock control */
+ __I uint32_t RESERVED5[4];
+ __IO uint32_t SSP0CLKDIV; /*!< (@ 0x40048094) SSP0 clock divider */
+ __IO uint32_t UARTCLKDIV; /*!< (@ 0x40048098) UART clock divider */
+ __IO uint32_t SSP1CLKDIV; /*!< (@ 0x4004809C) SSP1 clock divider */
+ __I uint32_t RESERVED6[8];
+ __IO uint32_t USBCLKSEL; /*!< (@ 0x400480C0) USB clock source select */
+ __IO uint32_t USBCLKUEN; /*!< (@ 0x400480C4) USB clock source update enable */
+ __IO uint32_t USBCLKDIV; /*!< (@ 0x400480C8) USB clock source divider */
+ __I uint32_t RESERVED7[5];
+ __IO uint32_t CLKOUTSEL; /*!< (@ 0x400480E0) CLKOUT clock source select */
+ __IO uint32_t CLKOUTUEN; /*!< (@ 0x400480E4) CLKOUT clock source update enable */
+ __IO uint32_t CLKOUTDIV; /*!< (@ 0x400480E8) CLKOUT clock divider */
+ __I uint32_t RESERVED8[5];
+ __I uint32_t PIOPORCAP0; /*!< (@ 0x40048100) POR captured PIO status 0 */
+ __I uint32_t PIOPORCAP1; /*!< (@ 0x40048104) POR captured PIO status 1 */
+ __I uint32_t RESERVED9[18];
+ __IO uint32_t BODCTRL; /*!< (@ 0x40048150) Brown-Out Detect */
+ __IO uint32_t SYSTCKCAL; /*!< (@ 0x40048154) System tick counter calibration */
+ __I uint32_t RESERVED10[6];
+ __IO uint32_t IRQLATENCY; /*!< (@ 0x40048170) IQR delay */
+ __IO uint32_t NMISRC; /*!< (@ 0x40048174) NMI Source Control */
+ __IO uint32_t PINTSEL[8]; /*!< (@ 0x40048178) GPIO Pin Interrupt Select register 0 */
+ __IO uint32_t USBCLKCTRL; /*!< (@ 0x40048198) USB clock control */
+ __I uint32_t USBCLKST; /*!< (@ 0x4004819C) USB clock status */
+ __I uint32_t RESERVED11[25];
+ __IO uint32_t STARTERP0; /*!< (@ 0x40048204) Start logic 0 interrupt wake-up enable register 0 */
+ __I uint32_t RESERVED12[3];
+ __IO uint32_t STARTERP1; /*!< (@ 0x40048214) Start logic 1 interrupt wake-up enable register 1 */
+ __I uint32_t RESERVED13[6];
+ __IO uint32_t PDSLEEPCFG; /*!< (@ 0x40048230) Power-down states in deep-sleep mode */
+ __IO uint32_t PDAWAKECFG; /*!< (@ 0x40048234) Power-down states for wake-up from deep-sleep */
+ __IO uint32_t PDRUNCFG; /*!< (@ 0x40048238) Power configuration register */
+ __I uint32_t RESERVED14[110];
+ __I uint32_t DEVICE_ID; /*!< (@ 0x400483F4) Device ID */
+} LPC_SYSCON_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- GPIO_PIN_INT -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x GPIO Modification date=3/17/2011 Major revision=0 Minor revision=3 (GPIO_PIN_INT)
+ */
+
+typedef struct { /*!< (@ 0x4004C000) GPIO_PIN_INT Structure */
+ __IO uint32_t ISEL; /*!< (@ 0x4004C000) Pin Interrupt Mode register */
+ __IO uint32_t IENR; /*!< (@ 0x4004C004) Pin Interrupt Enable (Rising) register */
+ __IO uint32_t SIENR; /*!< (@ 0x4004C008) Set Pin Interrupt Enable (Rising) register */
+ __IO uint32_t CIENR; /*!< (@ 0x4004C00C) Clear Pin Interrupt Enable (Rising) register */
+ __IO uint32_t IENF; /*!< (@ 0x4004C010) Pin Interrupt Enable Falling Edge / Active Level register */
+ __IO uint32_t SIENF; /*!< (@ 0x4004C014) Set Pin Interrupt Enable Falling Edge / Active Level register */
+ __IO uint32_t CIENF; /*!< (@ 0x4004C018) Clear Pin Interrupt Enable Falling Edge / Active Level address */
+ __IO uint32_t RISE; /*!< (@ 0x4004C01C) Pin Interrupt Rising Edge register */
+ __IO uint32_t FALL; /*!< (@ 0x4004C020) Pin Interrupt Falling Edge register */
+ __IO uint32_t IST; /*!< (@ 0x4004C024) Pin Interrupt Status register */
+} LPC_GPIO_PIN_INT_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- GPIO_GROUP_INT0/1 -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x GPIO Modification date=3/17/2011 Major revision=0 Minor revision=3 (GPIO_GROUP_INT0)
+ */
+
+typedef struct { /*!< (@ 0x4005C000) GPIO_GROUP_INT0 Structure */
+ __IO uint32_t CTRL; /*!< (@ 0x4005C000) GPIO grouped interrupt control register */
+ __I uint32_t RESERVED0[7];
+ __IO uint32_t PORT_POL[2]; /*!< (@ 0x4005C020) GPIO grouped interrupt port 0 polarity register */
+ __I uint32_t RESERVED1[6];
+ __IO uint32_t PORT_ENA[2]; /*!< (@ 0x4005C040) GPIO grouped interrupt port 0/1 enable register */
+} LPC_GPIO_GROUP_INTx_Type;
+
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- USB -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x USB2.0device controller Modification date=3/16/2011 Major revision=0 Minor revision=3 (USB)
+ */
+
+typedef struct { /*!< (@ 0x40080000) USB Structure */
+ __IO uint32_t DEVCMDSTAT; /*!< (@ 0x40080000) USB Device Command/Status register */
+ __IO uint32_t INFO; /*!< (@ 0x40080004) USB Info register */
+ __IO uint32_t EPLISTSTART; /*!< (@ 0x40080008) USB EP Command/Status List start address */
+ __IO uint32_t DATABUFSTART; /*!< (@ 0x4008000C) USB Data buffer start address */
+ __IO uint32_t LPM; /*!< (@ 0x40080010) Link Power Management register */
+ __IO uint32_t EPSKIP; /*!< (@ 0x40080014) USB Endpoint skip */
+ __IO uint32_t EPINUSE; /*!< (@ 0x40080018) USB Endpoint Buffer in use */
+ __IO uint32_t EPBUFCFG; /*!< (@ 0x4008001C) USB Endpoint Buffer Configuration register */
+ __IO uint32_t INTSTAT; /*!< (@ 0x40080020) USB interrupt status register */
+ __IO uint32_t INTEN; /*!< (@ 0x40080024) USB interrupt enable register */
+ __IO uint32_t INTSETSTAT; /*!< (@ 0x40080028) USB set interrupt status register */
+ __IO uint32_t INTROUTING; /*!< (@ 0x4008002C) USB interrupt routing register */
+ __I uint32_t RESERVED0[1];
+ __I uint32_t EPTOGGLE; /*!< (@ 0x40080034) USB Endpoint toggle register */
+} LPC_USB_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- GPIO_PORT -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x GPIO Modification date=3/17/2011 Major revision=0 Minor revision=3 (GPIO_PORT)
+ */
+
+typedef struct {
+ union {
+ struct {
+ __IO uint8_t B0[32]; /*!< (@ 0x50000000) Byte pin registers port 0; pins PIO0_0 to PIO0_31 */
+ __IO uint8_t B1[32]; /*!< (@ 0x50000020) Byte pin registers port 1 */
+ };
+ __IO uint8_t B[64]; /*!< (@ 0x50000000) Byte pin registers port 0/1 */
+ };
+ __I uint32_t RESERVED0[1008];
+ union {
+ struct {
+ __IO uint32_t W0[32]; /*!< (@ 0x50001000) Word pin registers port 0 */
+ __IO uint32_t W1[32]; /*!< (@ 0x50001080) Word pin registers port 1 */
+ };
+ __IO uint32_t W[64]; /*!< (@ 0x50001000) Word pin registers port 0/1 */
+ };
+ uint32_t RESERVED1[960];
+ __IO uint32_t DIR[2]; /* 0x2000 */
+ uint32_t RESERVED2[30];
+ __IO uint32_t MASK[2]; /* 0x2080 */
+ uint32_t RESERVED3[30];
+ __IO uint32_t PIN[2]; /* 0x2100 */
+ uint32_t RESERVED4[30];
+ __IO uint32_t MPIN[2]; /* 0x2180 */
+ uint32_t RESERVED5[30];
+ __IO uint32_t SET[2]; /* 0x2200 */
+ uint32_t RESERVED6[30];
+ __O uint32_t CLR[2]; /* 0x2280 */
+ uint32_t RESERVED7[30];
+ __O uint32_t NOT[2]; /* 0x2300 */
+} LPC_GPIO_Type;
+
+
+#if defined ( __CC_ARM )
+ #pragma no_anon_unions
+#endif
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- Peripheral memory map -----
+// ------------------------------------------------------------------------------------------------
+
+#define LPC_I2C_BASE (0x40000000)
+#define LPC_WWDT_BASE (0x40004000)
+#define LPC_USART_BASE (0x40008000)
+#define LPC_CT16B0_BASE (0x4000C000)
+#define LPC_CT16B1_BASE (0x40010000)
+#define LPC_CT32B0_BASE (0x40014000)
+#define LPC_CT32B1_BASE (0x40018000)
+#define LPC_ADC_BASE (0x4001C000)
+#define LPC_PMU_BASE (0x40038000)
+#define LPC_FLASHCTRL_BASE (0x4003C000)
+#define LPC_SSP0_BASE (0x40040000)
+#define LPC_SSP1_BASE (0x40058000)
+#define LPC_IOCON_BASE (0x40044000)
+#define LPC_SYSCON_BASE (0x40048000)
+#define LPC_GPIO_PIN_INT_BASE (0x4004C000)
+#define LPC_GPIO_GROUP_INT0_BASE (0x4005C000)
+#define LPC_GPIO_GROUP_INT1_BASE (0x40060000)
+#define LPC_USB_BASE (0x40080000)
+#define LPC_GPIO_BASE (0x50000000)
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- Peripheral declaration -----
+// ------------------------------------------------------------------------------------------------
+
+#define LPC_I2C ((LPC_I2C_Type *) LPC_I2C_BASE)
+#define LPC_WWDT ((LPC_WWDT_Type *) LPC_WWDT_BASE)
+#define LPC_USART ((LPC_USART_Type *) LPC_USART_BASE)
+#define LPC_CT16B0 ((LPC_CTxxBx_Type *) LPC_CT16B0_BASE)
+#define LPC_CT16B1 ((LPC_CTxxBx_Type *) LPC_CT16B1_BASE)
+#define LPC_CT32B0 ((LPC_CTxxBx_Type *) LPC_CT32B0_BASE)
+#define LPC_CT32B1 ((LPC_CTxxBx_Type *) LPC_CT32B1_BASE)
+#define LPC_ADC ((LPC_ADC_Type *) LPC_ADC_BASE)
+#define LPC_PMU ((LPC_PMU_Type *) LPC_PMU_BASE)
+#define LPC_FLASHCTRL ((LPC_FLASHCTRL_Type *) LPC_FLASHCTRL_BASE)
+#define LPC_SSP0 ((LPC_SSPx_Type *) LPC_SSP0_BASE)
+#define LPC_SSP1 ((LPC_SSPx_Type *) LPC_SSP1_BASE)
+#define LPC_IOCON ((LPC_IOCON_Type *) LPC_IOCON_BASE)
+#define LPC_SYSCON ((LPC_SYSCON_Type *) LPC_SYSCON_BASE)
+#define LPC_GPIO_PIN_INT ((LPC_GPIO_PIN_INT_Type *) LPC_GPIO_PIN_INT_BASE)
+#define LPC_GPIO_GROUP_INT0 ((LPC_GPIO_GROUP_INTx_Type*) LPC_GPIO_GROUP_INT0_BASE)
+#define LPC_GPIO_GROUP_INT1 ((LPC_GPIO_GROUP_INTx_Type*) LPC_GPIO_GROUP_INT1_BASE)
+#define LPC_USB ((LPC_USB_Type *) LPC_USB_BASE)
+#define LPC_GPIO ((LPC_GPIO_Type *) LPC_GPIO_BASE)
+
+
+/** @} */ /* End of group Device_Peripheral_Registers */
+/** @} */ /* End of group (null) */
+/** @} */ /* End of group LPC11Uxx */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif // __LPC11UXX_H__
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_APPNEARME_MICRONFCBOARD/TARGET_NXP/TARGET_LPC11UXX/PeripheralPins.h Tue Jun 09 14:29:26 2015 +0100 @@ -0,0 +1,43 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef MBED_PERIPHERALPINS_H +#define MBED_PERIPHERALPINS_H + +#include "pinmap.h" +#include "PeripheralNames.h" + +/************ADC***************/ +extern const PinMap PinMap_ADC[]; + +/************I2C***************/ +extern const PinMap PinMap_I2C_SDA[]; +extern const PinMap PinMap_I2C_SCL[]; + +/************UART***************/ +extern const PinMap PinMap_UART_TX[]; +extern const PinMap PinMap_UART_RX[]; + +/************SPI***************/ +extern const PinMap PinMap_SPI_SCLK[]; +extern const PinMap PinMap_SPI_MOSI[]; +extern const PinMap PinMap_SPI_MISO[]; +extern const PinMap PinMap_SPI_SSEL[]; + +/************PWM***************/ +extern const PinMap PinMap_PWM[]; + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_APPNEARME_MICRONFCBOARD/TARGET_NXP/TARGET_LPC11UXX/PortNames.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,31 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ Port0 = 0,
+ Port1 = 1
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_APPNEARME_MICRONFCBOARD/TARGET_NXP/TARGET_LPC11UXX/TARGET_APPNEARME_MICRONFCBOARD/PeripheralNames.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,71 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ UART_0 = (int)LPC_USART_BASE
+} UARTName;
+
+typedef enum {
+ I2C_0 = (int)LPC_I2C_BASE
+} I2CName;
+
+typedef enum {
+ ADC0_0 = 0,
+ ADC0_1,
+ ADC0_2,
+ ADC0_3,
+ ADC0_4,
+ ADC0_5,
+ ADC0_6,
+ ADC0_7
+} ADCName;
+
+typedef enum {
+ SPI_0 = (int)LPC_SSP0_BASE,
+ SPI_1 = (int)LPC_SSP1_BASE
+} SPIName;
+
+typedef enum {
+ PWM_1 = 0,
+ PWM_2,
+ PWM_3,
+ PWM_4,
+ PWM_5,
+ PWM_6,
+ PWM_7,
+ PWM_8,
+ PWM_9,
+ PWM_10,
+ PWM_11
+} PWMName;
+
+#define STDIO_UART_TX UART_TX
+#define STDIO_UART_RX UART_RX
+#define STDIO_UART UART_0
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_APPNEARME_MICRONFCBOARD/TARGET_NXP/TARGET_LPC11UXX/TARGET_APPNEARME_MICRONFCBOARD/PinNames.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,178 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT 5
+
+typedef enum {
+ // LPC11U Pin Names
+ P0_0 = 0,
+ P0_1 = 1,
+ P0_2 = 2,
+ P0_3 = 3,
+ P0_4 = 4,
+ P0_5 = 5,
+ P0_6 = 6,
+ P0_7 = 7,
+ P0_8 = 8,
+ P0_9 = 9,
+ P0_10 = 10,
+ P0_11 = 11,
+ P0_12 = 12,
+ P0_13 = 13,
+ P0_14 = 14,
+ P0_15 = 15,
+ P0_16 = 16,
+ P0_17 = 17,
+ P0_18 = 18,
+ P0_19 = 19,
+ P0_20 = 20,
+ P0_21 = 21,
+ P0_22 = 22,
+ P0_23 = 23,
+ P0_24 = 24,
+ P0_25 = 25,
+ P0_26 = 26,
+ P0_27 = 27,
+
+ P1_0 = 32,
+ P1_1 = 33,
+ P1_2 = 34,
+ P1_3 = 35,
+ P1_4 = 36,
+ P1_5 = 37,
+ P1_6 = 38,
+ P1_7 = 39,
+ P1_8 = 40,
+ P1_9 = 41,
+ P1_10 = 42,
+ P1_11 = 43,
+ P1_12 = 44,
+ P1_13 = 45,
+ P1_14 = 46,
+ P1_15 = 47,
+ P1_16 = 48,
+ P1_17 = 49,
+ P1_18 = 50,
+ P1_19 = 51,
+ P1_20 = 52,
+ P1_21 = 53,
+ P1_22 = 54,
+ P1_23 = 55,
+ P1_24 = 56,
+ P1_25 = 57,
+ P1_26 = 58,
+ P1_27 = 59,
+ P1_28 = 60,
+ P1_29 = 61,
+
+ P1_31 = 63,
+
+ // MicroNFCBoard pin names
+ M_RST = P0_0,
+ M_BOOT = P0_1,
+ M_RXD = P0_18,
+ M_TXD = P0_19,
+ M_SCL = P0_4,
+ M_SDA = P0_5,
+ M_D0 = P0_20,
+
+ M_A0 = P0_16,
+ M_A1 = P0_15,
+ M_A2 = P0_14,
+ M_A3 = P0_13,
+ M_SCK = P0_10,
+ M_MOSI = P0_9,
+ M_MISO = P0_8,
+ M_NCS = P0_2,
+ M_IRQ = P0_7,
+
+ // MicroNFCBoard pin numbers
+ p4 = M_RST,
+ p5 = M_BOOT,
+ p6 = M_RXD,
+ p7 = M_TXD,
+ p8 = M_SCL,
+ p9 = M_SDA,
+ p10 = M_D0,
+
+ p11 = M_IRQ,
+ p12 = M_NCS,
+ p13 = M_MISO,
+ p14 = M_MOSI,
+ p15 = M_SCK,
+ p16 = M_A3,
+ p17 = M_A2,
+ p18 = M_A1,
+ p19 = M_A0,
+
+ // Other Pin Names
+ LED1 = P0_11,
+ LED2 = P0_12,
+
+ // Alias to have correct blue lights of death pattern
+ LED3 = LED2,
+ LED4 = LED1,
+
+ UART_TX = M_TXD,
+ UART_RX = M_RXD,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF,
+
+ // Standard but not supported pins
+ USBTX = NC,
+ USBRX = NC,
+
+} PinName;
+
+typedef enum {
+ CHANNEL0 = FLEX_INT0_IRQn,
+ CHANNEL1 = FLEX_INT1_IRQn,
+ CHANNEL2 = FLEX_INT2_IRQn,
+ CHANNEL3 = FLEX_INT3_IRQn,
+ CHANNEL4 = FLEX_INT4_IRQn,
+ CHANNEL5 = FLEX_INT5_IRQn,
+ CHANNEL6 = FLEX_INT6_IRQn,
+ CHANNEL7 = FLEX_INT7_IRQn
+} Channel;
+
+typedef enum {
+ PullUp = 2,
+ PullDown = 1,
+ PullNone = 0,
+ Repeater = 3,
+ OpenDrain = 4,
+ PullDefault = PullDown
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_APPNEARME_MICRONFCBOARD/TARGET_NXP/TARGET_LPC11UXX/TARGET_APPNEARME_MICRONFCBOARD/device.h Tue Jun 09 14:29:26 2015 +0100 @@ -0,0 +1,59 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2015 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_CAN 0 + +#define DEVICE_RTC 0 + +#define DEVICE_ETHERNET 0 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 32 +#define DEVICE_MAC_OFFSET 20 + +#define DEVICE_SLEEP 1 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 0 + +#define DEVICE_ERROR_PATTERN 1 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_APPNEARME_MICRONFCBOARD/TARGET_NXP/TARGET_LPC11UXX/gpio_object.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_GPIO_OBJECT_H
+#define MBED_GPIO_OBJECT_H
+
+#include "mbed_assert.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ uint32_t mask;
+
+ __IO uint32_t *reg_dir;
+ __IO uint32_t *reg_set;
+ __IO uint32_t *reg_clr;
+ __I uint32_t *reg_in;
+} gpio_t;
+
+static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ if (value)
+ *obj->reg_set = obj->mask;
+ else
+ *obj->reg_clr = obj->mask;
+}
+
+static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ return ((*obj->reg_in & obj->mask) ? 1 : 0);
+}
+
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_APPNEARME_MICRONFCBOARD/TARGET_NXP/TARGET_LPC11UXX/objects.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,66 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ uint32_t ch;
+};
+
+struct port_s {
+ __IO uint32_t *reg_dir;
+ __IO uint32_t *reg_mpin;
+ PortName port;
+ uint32_t mask;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+};
+
+struct serial_s {
+ LPC_USART_Type *uart;
+ int index;
+};
+
+struct analogin_s {
+ ADCName adc;
+};
+
+struct i2c_s {
+ LPC_I2C_Type *i2c;
+};
+
+struct spi_s {
+ LPC_SSPx_Type *spi;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_APPNEARME_MICRONFCBOARD/TOOLCHAIN_ARM_MICRO/LPC11U34.sct Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,17 @@
+
+LR_IROM1 0x00000000 0xC000 { ; load region size_region (48k)
+ ER_IROM1 0x00000000 0xC000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+ ; 8_byte_aligned(48 vect * 4 bytes) = 8_byte_aligned(0xC0) = 0xC0
+ ; 8KB - 0xC0 = 0x1F40
+ RW_IRAM1 0x100000C0 0x1F40 {
+ .ANY (+RW +ZI)
+ }
+ RW_IRAM2 0x20004000 0x800 { ; RW data, USB RAM
+ .ANY (USBRAM)
+ }
+}
+
Binary file TARGET_APPNEARME_MICRONFCBOARD/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_APPNEARME_MICRONFCBOARD/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_APPNEARME_MICRONFCBOARD/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_APPNEARME_MICRONFCBOARD/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_APPNEARME_MICRONFCBOARD/TOOLCHAIN_ARM_MICRO/startup_LPC11xx.o has changed
Binary file TARGET_APPNEARME_MICRONFCBOARD/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_APPNEARME_MICRONFCBOARD/TOOLCHAIN_ARM_MICRO/system_LPC11Uxx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_APPNEARME_MICRONFCBOARD/TOOLCHAIN_ARM_STD/LPC11U34.sct Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,17 @@
+
+LR_IROM1 0x00000000 0xC000 { ; load region size_region (48k)
+ ER_IROM1 0x00000000 0xC000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+ ; 8_byte_aligned(48 vect * 4 bytes) = 8_byte_aligned(0xC0) = 0xC0
+ ; 8KB - 0xC0 = 0x1F40
+ RW_IRAM1 0x100000C0 0x1F40 {
+ .ANY (+RW +ZI)
+ }
+ RW_IRAM2 0x20004000 0x800 { ; RW data, USB RAM
+ .ANY (USBRAM)
+ }
+}
+
Binary file TARGET_APPNEARME_MICRONFCBOARD/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_APPNEARME_MICRONFCBOARD/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_APPNEARME_MICRONFCBOARD/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_APPNEARME_MICRONFCBOARD/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_APPNEARME_MICRONFCBOARD/TOOLCHAIN_ARM_STD/startup_LPC11xx.o has changed
Binary file TARGET_APPNEARME_MICRONFCBOARD/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_APPNEARME_MICRONFCBOARD/TOOLCHAIN_ARM_STD/system_LPC11Uxx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_APPNEARME_MICRONFCBOARD/TOOLCHAIN_GCC_ARM/LPC11U34.ld Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,151 @@
+/* Linker script to configure memory regions. */
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 48K
+ RAM (rwx) : ORIGIN = 0x100000C0, LENGTH = 0x1F40
+ USB_RAM (rwx): ORIGIN = 0x20004000, LENGTH = 0x800
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.isr_vector))
+ *(.text.Reset_Handler)
+
+ /* Only vectors and code running at reset are safe to be in first 512
+ bytes since RAM can be mapped into this area for RAM based interrupt
+ vectors. */
+ . = 0x00000200;
+ *(.text*)
+
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE (__fini_array_end = .);
+
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+
+ } > RAM
+
+ .bss :
+ {
+ __bss_start__ = .;
+ *(.bss*)
+ *(COMMON)
+ __bss_end__ = .;
+ } > RAM
+
+ .heap :
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy :
+ {
+ *(.stack)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
Binary file TARGET_APPNEARME_MICRONFCBOARD/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_APPNEARME_MICRONFCBOARD/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_APPNEARME_MICRONFCBOARD/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_APPNEARME_MICRONFCBOARD/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_APPNEARME_MICRONFCBOARD/TOOLCHAIN_GCC_ARM/startup_LPC11xx.o has changed
Binary file TARGET_APPNEARME_MICRONFCBOARD/TOOLCHAIN_GCC_ARM/system_LPC11Uxx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_APPNEARME_MICRONFCBOARD/cmsis.h Tue Jun 09 14:29:26 2015 +0100 @@ -0,0 +1,13 @@ +/* mbed Microcontroller Library - CMSIS + * Copyright (C) 2009-2011 ARM Limited. All rights reserved. + * + * A generic CMSIS include header, pulling in LPC11U24 specifics + */ + +#ifndef MBED_CMSIS_H +#define MBED_CMSIS_H + +#include "LPC11Uxx.h" +#include "cmsis_nvic.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_APPNEARME_MICRONFCBOARD/cmsis_nvic.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,51 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2011 ARM Limited. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of ARM Limited nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+#include "cmsis.h"
+
+#define NVIC_NUM_VECTORS (16 + 32) // CORE + MCU Peripherals
+#define NVIC_USER_IRQ_OFFSET 16
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
+uint32_t NVIC_GetVector(IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_APPNEARME_MICRONFCBOARD/core_ca9.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,271 @@
+/**************************************************************************//**
+ * @file core_ca9.h
+ * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File
+ * @version
+ * @date 25 March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CA9_H_GENERIC
+#define __CORE_CA9_H_GENERIC
+
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_A9
+ @{
+ */
+
+/* CMSIS CA9 definitions */
+#define __CA9_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CA9_CMSIS_VERSION_SUB (0x10) /*!< [15:0] CMSIS HAL sub version */
+#define __CA9_CMSIS_VERSION ((__CA9_CMSIS_VERSION_MAIN << 16) | \
+ __CA9_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_A (0x09) /*!< Cortex-A Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /*!< standard types definitions */
+#include "core_caInstr.h" /*!< Core Instruction Access */
+#include "core_caFunc.h" /*!< Core Function Access */
+#include "core_cm4_simd.h" /*!< Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CA9_H_DEPENDANT
+#define __CORE_CA9_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CA9_REV
+ #define __CA9_REV 0x0000
+ #warning "__CA9_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 1
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 1
+ #endif
+
+ #if __Vendor_SysTickConfig == 0
+ #error "__Vendor_SysTickConfig set to 0, but vendor systick timer must be supplied for Cortex-A9"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_A9 */
+
+
+/*******************************************************************************
+ * Register Abstraction
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-A processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t reserved1:7; /*!< bit: 20..23 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/*@} end of group CMSIS_CORE */
+
+/*@} end of CMSIS_Core_FPUFunctions */
+
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_APPNEARME_MICRONFCBOARD/core_caFunc.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,1161 @@
+/**************************************************************************//**
+ * @file core_caFunc.h
+ * @brief CMSIS Cortex-A Core Function Access Header File
+ * @version V3.10
+ * @date 9 May 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CAFUNC_H__
+#define __CORE_CAFUNC_H__
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get CPSR Register
+
+ This function returns the content of the CPSR Register.
+
+ \return CPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_CPSR(void)
+{
+ register uint32_t __regCPSR __ASM("cpsr");
+ return(__regCPSR);
+}
+
+/** \brief Set Stack Pointer
+
+ This function assigns the given value to the current stack pointer.
+
+ \param [in] topOfStack Stack Pointer value to set
+ */
+register uint32_t __regSP __ASM("sp");
+__STATIC_INLINE void __set_SP(uint32_t topOfStack)
+{
+ __regSP = topOfStack;
+}
+
+
+/** \brief Get link register
+
+ This function returns the value of the link register
+
+ \return Value of link register
+ */
+register uint32_t __reglr __ASM("lr");
+__STATIC_INLINE uint32_t __get_LR(void)
+{
+ return(__reglr);
+}
+
+/** \brief Set link register
+
+ This function sets the value of the link register
+
+ \param [in] lr LR value to set
+ */
+__STATIC_INLINE void __set_LR(uint32_t lr)
+{
+ __reglr = lr;
+}
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_PSP(uint32_t topOfProcStack)
+{
+ ARM
+ PRESERVE8
+
+ BIC R0, R0, #7 ;ensure stack is 8-byte aligned
+ MRS R1, CPSR
+ CPS #MODE_SYS ;no effect in USR mode
+ MOV SP, R0
+ MSR CPSR_c, R1 ;no effect in USR mode
+ ISB
+ BX LR
+
+}
+
+/** \brief Set User Mode
+
+ This function changes the processor state to User Mode
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_CPS_USR(void)
+{
+ ARM
+
+ CPS #MODE_USR
+ BX LR
+}
+
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+/** \brief Get FPEXC
+
+ This function returns the current value of the Floating Point Exception Control register.
+
+ \return Floating Point Exception Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPEXC(void)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ return(__regfpexc);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPEXC
+
+ This function assigns the given value to the Floating Point Exception Control register.
+
+ \param [in] fpscr Floating Point Exception Control value to set
+ */
+__STATIC_INLINE void __set_FPEXC(uint32_t fpexc)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ __regfpexc = (fpexc);
+#endif
+}
+
+/** \brief Get CPACR
+
+ This function returns the current value of the Coprocessor Access Control register.
+
+ \return Coprocessor Access Control register value
+ */
+__STATIC_INLINE uint32_t __get_CPACR(void)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ return __regCPACR;
+}
+
+/** \brief Set CPACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] cpacr Coporcessor Acccess Control value to set
+ */
+__STATIC_INLINE void __set_CPACR(uint32_t cpacr)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ __regCPACR = cpacr;
+ __ISB();
+}
+
+/** \brief Get CBAR
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Configuration Base Address register value
+ */
+__STATIC_INLINE uint32_t __get_CBAR() {
+ register uint32_t __regCBAR __ASM("cp15:4:c15:c0:0");
+ return(__regCBAR);
+}
+
+/** \brief Get TTBR0
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Translation Table Base Register 0 value
+ */
+__STATIC_INLINE uint32_t __get_TTBR0() {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ return(__regTTBR0);
+}
+
+/** \brief Set TTBR0
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] ttbr0 Translation Table Base Register 0 value to set
+ */
+__STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ __regTTBR0 = ttbr0;
+ __ISB();
+}
+
+/** \brief Get DACR
+
+ This function returns the value of the Domain Access Control Register.
+
+ \return Domain Access Control Register value
+ */
+__STATIC_INLINE uint32_t __get_DACR() {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ return(__regDACR);
+}
+
+/** \brief Set DACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] dacr Domain Access Control Register value to set
+ */
+__STATIC_INLINE void __set_DACR(uint32_t dacr) {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ __regDACR = dacr;
+ __ISB();
+}
+
+/******************************** Cache and BTAC enable ****************************************************/
+
+/** \brief Set SCTLR
+
+ This function assigns the given value to the System Control Register.
+
+ \param [in] sctlr System Control Register, value to set
+ */
+__STATIC_INLINE void __set_SCTLR(uint32_t sctlr)
+{
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ __regSCTLR = sctlr;
+}
+
+/** \brief Get SCTLR
+
+ This function returns the value of the System Control Register.
+
+ \return System Control Register value
+ */
+__STATIC_INLINE uint32_t __get_SCTLR() {
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ return(__regSCTLR);
+}
+
+/** \brief Enable Caches
+
+ Enable Caches
+ */
+__STATIC_INLINE void __enable_caches(void) {
+ // Set I bit 12 to enable I Cache
+ // Set C bit 2 to enable D Cache
+ __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief Disable Caches
+
+ Disable Caches
+ */
+__STATIC_INLINE void __disable_caches(void) {
+ // Clear I bit 12 to disable I Cache
+ // Clear C bit 2 to disable D Cache
+ __set_SCTLR( __get_SCTLR() & ~(1 << 12) & ~(1 << 2));
+ __ISB();
+}
+
+/** \brief Enable BTAC
+
+ Enable BTAC
+ */
+__STATIC_INLINE void __enable_btac(void) {
+ // Set Z bit 11 to enable branch prediction
+ __set_SCTLR( __get_SCTLR() | (1 << 11));
+ __ISB();
+}
+
+/** \brief Disable BTAC
+
+ Disable BTAC
+ */
+__STATIC_INLINE void __disable_btac(void) {
+ // Clear Z bit 11 to disable branch prediction
+ __set_SCTLR( __get_SCTLR() & ~(1 << 11));
+}
+
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __enable_mmu(void) {
+ // Set M bit 0 to enable the MMU
+ // Set AFE bit to enable simplified access permissions model
+ // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+ __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+ __ISB();
+}
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __disable_mmu(void) {
+ // Clear M bit 0 to disable the MMU
+ __set_SCTLR( __get_SCTLR() & ~1);
+ __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief Invalidate the whole tlb
+
+ TLBIALL. Invalidate the whole tlb
+ */
+
+__STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+ register uint32_t __TLBIALL __ASM("cp15:0:c8:c7:0");
+ __TLBIALL = 0;
+ __DSB();
+ __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief Invalidate entire branch predictor array
+
+ BPIALL. Branch Predictor Invalidate All.
+ */
+
+__STATIC_INLINE void __v7_inv_btac(void) {
+ register uint32_t __BPIALL __ASM("cp15:0:c7:c5:6");
+ __BPIALL = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief Invalidate the whole I$
+
+ ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+__STATIC_INLINE void __v7_inv_icache_all(void) {
+ register uint32_t __ICIALLU __ASM("cp15:0:c7:c5:0");
+ __ICIALLU = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new I cache state
+}
+
+/** \brief Clean D$ by MVA
+
+ DCCMVAC. Data cache clean by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_dcache_mva(void *va) {
+ register uint32_t __DCCMVAC __ASM("cp15:0:c7:c10:1");
+ __DCCMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Invalidate D$ by MVA
+
+ DCIMVAC. Data cache invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_inv_dcache_mva(void *va) {
+ register uint32_t __DCIMVAC __ASM("cp15:0:c7:c6:1");
+ __DCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Clean and Invalidate D$ by MVA
+
+ DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+ register uint32_t __DCCIMVAC __ASM("cp15:0:c7:c14:1");
+ __DCCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief
+ * Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency.
+ */
+#pragma push
+#pragma arm
+__STATIC_ASM void __v7_all_cache(uint32_t op) {
+ ARM
+
+ PUSH {R4-R11}
+
+ MRC p15, 1, R6, c0, c0, 1 // Read CLIDR
+ ANDS R3, R6, #0x07000000 // Extract coherency level
+ MOV R3, R3, LSR #23 // Total cache levels << 1
+ BEQ Finished // If 0, no need to clean
+
+ MOV R10, #0 // R10 holds current cache level << 1
+Loop1 ADD R2, R10, R10, LSR #1 // R2 holds cache "Set" position
+ MOV R1, R6, LSR R2 // Bottom 3 bits are the Cache-type for this level
+ AND R1, R1, #7 // Isolate those lower 3 bits
+ CMP R1, #2
+ BLT Skip // No cache or only instruction cache at this level
+
+ MCR p15, 2, R10, c0, c0, 0 // Write the Cache Size selection register
+ ISB // ISB to sync the change to the CacheSizeID reg
+ MRC p15, 1, R1, c0, c0, 0 // Reads current Cache Size ID register
+ AND R2, R1, #7 // Extract the line length field
+ ADD R2, R2, #4 // Add 4 for the line length offset (log2 16 bytes)
+ LDR R4, =0x3FF
+ ANDS R4, R4, R1, LSR #3 // R4 is the max number on the way size (right aligned)
+ CLZ R5, R4 // R5 is the bit position of the way size increment
+ LDR R7, =0x7FFF
+ ANDS R7, R7, R1, LSR #13 // R7 is the max number of the index size (right aligned)
+
+Loop2 MOV R9, R4 // R9 working copy of the max way size (right aligned)
+
+Loop3 ORR R11, R10, R9, LSL R5 // Factor in the Way number and cache number into R11
+ ORR R11, R11, R7, LSL R2 // Factor in the Set number
+ CMP R0, #0
+ BNE Dccsw
+ MCR p15, 0, R11, c7, c6, 2 // DCISW. Invalidate by Set/Way
+ B cont
+Dccsw CMP R0, #1
+ BNE Dccisw
+ MCR p15, 0, R11, c7, c10, 2 // DCCSW. Clean by Set/Way
+ B cont
+Dccisw MCR p15, 0, R11, c7, c14, 2 // DCCISW, Clean and Invalidate by Set/Way
+cont SUBS R9, R9, #1 // Decrement the Way number
+ BGE Loop3
+ SUBS R7, R7, #1 // Decrement the Set number
+ BGE Loop2
+Skip ADD R10, R10, #2 // increment the cache number
+ CMP R3, R10
+ BGT Loop1
+
+Finished
+ DSB
+ POP {R4-R11}
+ BX lr
+
+}
+#pragma pop
+
+/** \brief __v7_all_cache - helper function
+
+ */
+
+/** \brief Invalidate the whole D$
+
+ DCISW. Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_inv_dcache_all(void) {
+ __v7_all_cache(0);
+}
+
+/** \brief Clean the whole D$
+
+ DCCSW. Clean by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_dcache_all(void) {
+ __v7_all_cache(1);
+}
+
+/** \brief Clean and invalidate the whole D$
+
+ DCCISW. Clean and Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_inv_dcache_all(void) {
+ __v7_all_cache(2);
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__ICCARM__)) /*---------------- ICC Compiler ---------------------*/
+
+#error IAR Compiler support not implemented for Cortex-A
+
+#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
+
+/* GNU gcc specific functions */
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i");
+}
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __disable_irq(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("mrs %0, cpsr" : "=r" (result));
+ __ASM volatile ("cpsid i");
+ return(result & 0x80);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+#if 1
+ uint32_t result;
+
+ __ASM volatile ("mrs %0, apsr" : "=r" (result) );
+ return (result);
+#else
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+#endif
+}
+
+
+/** \brief Get CPSR Register
+
+ This function returns the content of the CPSR Register.
+
+ \return CPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CPSR(void)
+{
+#if 1
+ register uint32_t __regCPSR;
+ __ASM volatile ("mrs %0, cpsr" : "=r" (__regCPSR));
+#else
+ register uint32_t __regCPSR __ASM("cpsr");
+#endif
+ return(__regCPSR);
+}
+
+#if 0
+/** \brief Set Stack Pointer
+
+ This function assigns the given value to the current stack pointer.
+
+ \param [in] topOfStack Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_SP(uint32_t topOfStack)
+{
+ register uint32_t __regSP __ASM("sp");
+ __regSP = topOfStack;
+}
+#endif
+
+/** \brief Get link register
+
+ This function returns the value of the link register
+
+ \return Value of link register
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_LR(void)
+{
+ register uint32_t __reglr __ASM("lr");
+ return(__reglr);
+}
+
+#if 0
+/** \brief Set link register
+
+ This function sets the value of the link register
+
+ \param [in] lr LR value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_LR(uint32_t lr)
+{
+ register uint32_t __reglr __ASM("lr");
+ __reglr = lr;
+}
+#endif
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+extern void __set_PSP(uint32_t topOfProcStack);
+
+/** \brief Set User Mode
+
+ This function changes the processor state to User Mode
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+extern void __set_CPS_USR(void);
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+#if 1
+ uint32_t result;
+
+ __ASM volatile ("vmrs %0, fpscr" : "=r" (result) );
+ return (result);
+#else
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#endif
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+#if 1
+ __ASM volatile ("vmsr fpscr, %0" : : "r" (fpscr) );
+#else
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+#endif
+}
+
+/** \brief Get FPEXC
+
+ This function returns the current value of the Floating Point Exception Control register.
+
+ \return Floating Point Exception Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPEXC(void)
+{
+#if (__FPU_PRESENT == 1)
+#if 1
+ uint32_t result;
+
+ __ASM volatile ("vmrs %0, fpexc" : "=r" (result));
+ return (result);
+#else
+ register uint32_t __regfpexc __ASM("fpexc");
+ return(__regfpexc);
+#endif
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPEXC
+
+ This function assigns the given value to the Floating Point Exception Control register.
+
+ \param [in] fpscr Floating Point Exception Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPEXC(uint32_t fpexc)
+{
+#if (__FPU_PRESENT == 1)
+#if 1
+ __ASM volatile ("vmsr fpexc, %0" : : "r" (fpexc));
+#else
+ register uint32_t __regfpexc __ASM("fpexc");
+ __regfpexc = (fpexc);
+#endif
+#endif
+}
+
+/** \brief Get CPACR
+
+ This function returns the current value of the Coprocessor Access Control register.
+
+ \return Coprocessor Access Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CPACR(void)
+{
+#if 1
+ register uint32_t __regCPACR;
+ __ASM volatile ("mrc p15, 0, %0, c1, c0, 2" : "=r" (__regCPACR));
+#else
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+#endif
+ return __regCPACR;
+}
+
+/** \brief Set CPACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] cpacr Coporcessor Acccess Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CPACR(uint32_t cpacr)
+{
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c1, c0, 2" : : "r" (cpacr));
+#else
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ __regCPACR = cpacr;
+#endif
+ __ISB();
+}
+
+/** \brief Get CBAR
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Configuration Base Address register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CBAR() {
+#if 1
+ register uint32_t __regCBAR;
+ __ASM volatile ("mrc p15, 4, %0, c15, c0, 0" : "=r" (__regCBAR));
+#else
+ register uint32_t __regCBAR __ASM("cp15:4:c15:c0:0");
+#endif
+ return(__regCBAR);
+}
+
+/** \brief Get TTBR0
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Translation Table Base Register 0 value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_TTBR0() {
+#if 1
+ register uint32_t __regTTBR0;
+ __ASM volatile ("mrc p15, 0, %0, c2, c0, 0" : "=r" (__regTTBR0));
+#else
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+#endif
+ return(__regTTBR0);
+}
+
+/** \brief Set TTBR0
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] ttbr0 Translation Table Base Register 0 value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c2, c0, 0" : : "r" (ttbr0));
+#else
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ __regTTBR0 = ttbr0;
+#endif
+ __ISB();
+}
+
+/** \brief Get DACR
+
+ This function returns the value of the Domain Access Control Register.
+
+ \return Domain Access Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_DACR() {
+#if 1
+ register uint32_t __regDACR;
+ __ASM volatile ("mrc p15, 0, %0, c3, c0, 0" : "=r" (__regDACR));
+#else
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+#endif
+ return(__regDACR);
+}
+
+/** \brief Set DACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] dacr Domain Access Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_DACR(uint32_t dacr) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c3, c0, 0" : : "r" (dacr));
+#else
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ __regDACR = dacr;
+#endif
+ __ISB();
+}
+
+/******************************** Cache and BTAC enable ****************************************************/
+
+/** \brief Set SCTLR
+
+ This function assigns the given value to the System Control Register.
+
+ \param [in] sctlr System Control Register, value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_SCTLR(uint32_t sctlr)
+{
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c1, c0, 0" : : "r" (sctlr));
+#else
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ __regSCTLR = sctlr;
+#endif
+}
+
+/** \brief Get SCTLR
+
+ This function returns the value of the System Control Register.
+
+ \return System Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_SCTLR() {
+#if 1
+ register uint32_t __regSCTLR;
+ __ASM volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (__regSCTLR));
+#else
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+#endif
+ return(__regSCTLR);
+}
+
+/** \brief Enable Caches
+
+ Enable Caches
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_caches(void) {
+ // Set I bit 12 to enable I Cache
+ // Set C bit 2 to enable D Cache
+ __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief Disable Caches
+
+ Disable Caches
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_caches(void) {
+ // Clear I bit 12 to disable I Cache
+ // Clear C bit 2 to disable D Cache
+ __set_SCTLR( __get_SCTLR() & ~(1 << 12) & ~(1 << 2));
+ __ISB();
+}
+
+/** \brief Enable BTAC
+
+ Enable BTAC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_btac(void) {
+ // Set Z bit 11 to enable branch prediction
+ __set_SCTLR( __get_SCTLR() | (1 << 11));
+ __ISB();
+}
+
+/** \brief Disable BTAC
+
+ Disable BTAC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_btac(void) {
+ // Clear Z bit 11 to disable branch prediction
+ __set_SCTLR( __get_SCTLR() & ~(1 << 11));
+}
+
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_mmu(void) {
+ // Set M bit 0 to enable the MMU
+ // Set AFE bit to enable simplified access permissions model
+ // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+ __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+ __ISB();
+}
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_mmu(void) {
+ // Clear M bit 0 to disable the MMU
+ __set_SCTLR( __get_SCTLR() & ~1);
+ __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief Invalidate the whole tlb
+
+ TLBIALL. Invalidate the whole tlb
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c8, c7, 0" : : "r" (0));
+#else
+ register uint32_t __TLBIALL __ASM("cp15:0:c8:c7:0");
+ __TLBIALL = 0;
+#endif
+ __DSB();
+ __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief Invalidate entire branch predictor array
+
+ BPIALL. Branch Predictor Invalidate All.
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_btac(void) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c5, 6" : : "r" (0));
+#else
+ register uint32_t __BPIALL __ASM("cp15:0:c7:c5:6");
+ __BPIALL = 0;
+#endif
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief Invalidate the whole I$
+
+ ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_icache_all(void) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c5, 0" : : "r" (0));
+#else
+ register uint32_t __ICIALLU __ASM("cp15:0:c7:c5:0");
+ __ICIALLU = 0;
+#endif
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new I cache state
+}
+
+/** \brief Clean D$ by MVA
+
+ DCCMVAC. Data cache clean by MVA to PoC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_dcache_mva(void *va) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c10, 1" : : "r" ((uint32_t)va));
+#else
+ register uint32_t __DCCMVAC __ASM("cp15:0:c7:c10:1");
+ __DCCMVAC = (uint32_t)va;
+#endif
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Invalidate D$ by MVA
+
+ DCIMVAC. Data cache invalidate by MVA to PoC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_dcache_mva(void *va) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c6, 1" : : "r" ((uint32_t)va));
+#else
+ register uint32_t __DCIMVAC __ASM("cp15:0:c7:c6:1");
+ __DCIMVAC = (uint32_t)va;
+#endif
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Clean and Invalidate D$ by MVA
+
+ DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c14, 1" : : "r" ((uint32_t)va));
+#else
+ register uint32_t __DCCIMVAC __ASM("cp15:0:c7:c14:1");
+ __DCCIMVAC = (uint32_t)va;
+#endif
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief
+ * Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency.
+ */
+
+/** \brief __v7_all_cache - helper function
+
+ */
+
+extern void __v7_all_cache(uint32_t op);
+
+
+/** \brief Invalidate the whole D$
+
+ DCISW. Invalidate by Set/Way
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_dcache_all(void) {
+ __v7_all_cache(0);
+}
+
+/** \brief Clean the whole D$
+
+ DCCSW. Clean by Set/Way
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_dcache_all(void) {
+ __v7_all_cache(1);
+}
+
+/** \brief Clean and invalidate the whole D$
+
+ DCCISW. Clean and Invalidate by Set/Way
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_inv_dcache_all(void) {
+ __v7_all_cache(2);
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__TASKING__)) /*--------------- TASKING Compiler -----------------*/
+
+#error TASKING Compiler support not implemented for Cortex-A
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CAFUNC_H__ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_APPNEARME_MICRONFCBOARD/core_caInstr.h Tue Jun 09 14:29:26 2015 +0100 @@ -0,0 +1,45 @@ +/**************************************************************************//** + * @file core_caInstr.h + * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File + * @version + * @date 04. December 2012 + * + * @note + * + ******************************************************************************/ +/* Copyright (c) 2009 - 2012 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + +#ifndef __CORE_CAINSTR_H__ +#define __CORE_CAINSTR_H__ + +#define __CORTEX_M 0x3 +#include "core_cmInstr.h" +#undef __CORTEX_M + +#endif +
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_APPNEARME_MICRONFCBOARD/core_ca_mmu.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,848 @@
+;/**************************************************************************//**
+; * @file core_ca_mmu.h
+; * @brief MMU Startup File for
+; * VE_A9_MP Device Series
+; * @version V1.01
+; * @date 25 March 2013
+; *
+; * @note
+; *
+; ******************************************************************************/
+;/* Copyright (c) 2012 ARM LIMITED
+;
+; All rights reserved.
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+; - Redistributions of source code must retain the above copyright
+; notice, this list of conditions and the following disclaimer.
+; - Redistributions in binary form must reproduce the above copyright
+; notice, this list of conditions and the following disclaimer in the
+; documentation and/or other materials provided with the distribution.
+; - Neither the name of ARM nor the names of its contributors may be used
+; to endorse or promote products derived from this software without
+; specific prior written permission.
+; *
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+; ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+; LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+; CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+; SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+; INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+; CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+; ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+; POSSIBILITY OF SUCH DAMAGE.
+; ---------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef _MMU_FUNC_H
+#define _MMU_FUNC_H
+
+#define SECTION_DESCRIPTOR (0x2)
+#define SECTION_MASK (0xFFFFFFFC)
+
+#define SECTION_TEXCB_MASK (0xFFFF8FF3)
+#define SECTION_B_SHIFT (2)
+#define SECTION_C_SHIFT (3)
+#define SECTION_TEX0_SHIFT (12)
+#define SECTION_TEX1_SHIFT (13)
+#define SECTION_TEX2_SHIFT (14)
+
+#define SECTION_XN_MASK (0xFFFFFFEF)
+#define SECTION_XN_SHIFT (4)
+
+#define SECTION_DOMAIN_MASK (0xFFFFFE1F)
+#define SECTION_DOMAIN_SHIFT (5)
+
+#define SECTION_P_MASK (0xFFFFFDFF)
+#define SECTION_P_SHIFT (9)
+
+#define SECTION_AP_MASK (0xFFFF73FF)
+#define SECTION_AP_SHIFT (10)
+#define SECTION_AP2_SHIFT (15)
+
+#define SECTION_S_MASK (0xFFFEFFFF)
+#define SECTION_S_SHIFT (16)
+
+#define SECTION_NG_MASK (0xFFFDFFFF)
+#define SECTION_NG_SHIFT (17)
+
+#define SECTION_NS_MASK (0xFFF7FFFF)
+#define SECTION_NS_SHIFT (19)
+
+
+#define PAGE_L1_DESCRIPTOR (0x1)
+#define PAGE_L1_MASK (0xFFFFFFFC)
+
+#define PAGE_L2_4K_DESC (0x2)
+#define PAGE_L2_4K_MASK (0xFFFFFFFD)
+
+#define PAGE_L2_64K_DESC (0x1)
+#define PAGE_L2_64K_MASK (0xFFFFFFFC)
+
+#define PAGE_4K_TEXCB_MASK (0xFFFFFE33)
+#define PAGE_4K_B_SHIFT (2)
+#define PAGE_4K_C_SHIFT (3)
+#define PAGE_4K_TEX0_SHIFT (6)
+#define PAGE_4K_TEX1_SHIFT (7)
+#define PAGE_4K_TEX2_SHIFT (8)
+
+#define PAGE_64K_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_64K_B_SHIFT (2)
+#define PAGE_64K_C_SHIFT (3)
+#define PAGE_64K_TEX0_SHIFT (12)
+#define PAGE_64K_TEX1_SHIFT (13)
+#define PAGE_64K_TEX2_SHIFT (14)
+
+#define PAGE_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_B_SHIFT (2)
+#define PAGE_C_SHIFT (3)
+#define PAGE_TEX_SHIFT (12)
+
+#define PAGE_XN_4K_MASK (0xFFFFFFFE)
+#define PAGE_XN_4K_SHIFT (0)
+#define PAGE_XN_64K_MASK (0xFFFF7FFF)
+#define PAGE_XN_64K_SHIFT (15)
+
+
+#define PAGE_DOMAIN_MASK (0xFFFFFE1F)
+#define PAGE_DOMAIN_SHIFT (5)
+
+#define PAGE_P_MASK (0xFFFFFDFF)
+#define PAGE_P_SHIFT (9)
+
+#define PAGE_AP_MASK (0xFFFFFDCF)
+#define PAGE_AP_SHIFT (4)
+#define PAGE_AP2_SHIFT (9)
+
+#define PAGE_S_MASK (0xFFFFFBFF)
+#define PAGE_S_SHIFT (10)
+
+#define PAGE_NG_MASK (0xFFFFF7FF)
+#define PAGE_NG_SHIFT (11)
+
+#define PAGE_NS_MASK (0xFFFFFFF7)
+#define PAGE_NS_SHIFT (3)
+
+#define OFFSET_1M (0x00100000)
+#define OFFSET_64K (0x00010000)
+#define OFFSET_4K (0x00001000)
+
+#define DESCRIPTOR_FAULT (0x00000000)
+
+/* ########################### MMU Function Access ########################### */
+/** \ingroup MMU_FunctionInterface
+ \defgroup MMU_Functions MMU Functions Interface
+ @{
+ */
+
+/* Attributes enumerations */
+
+/* Region size attributes */
+typedef enum
+{
+ SECTION,
+ PAGE_4k,
+ PAGE_64k,
+} mmu_region_size_Type;
+
+/* Region type attributes */
+typedef enum
+{
+ NORMAL,
+ DEVICE,
+ SHARED_DEVICE,
+ NON_SHARED_DEVICE,
+ STRONGLY_ORDERED
+} mmu_memory_Type;
+
+/* Region cacheability attributes */
+typedef enum
+{
+ NON_CACHEABLE,
+ WB_WA,
+ WT,
+ WB_NO_WA,
+} mmu_cacheability_Type;
+
+/* Region parity check attributes */
+typedef enum
+{
+ ECC_DISABLED,
+ ECC_ENABLED,
+} mmu_ecc_check_Type;
+
+/* Region execution attributes */
+typedef enum
+{
+ EXECUTE,
+ NON_EXECUTE,
+} mmu_execute_Type;
+
+/* Region global attributes */
+typedef enum
+{
+ GLOBAL,
+ NON_GLOBAL,
+} mmu_global_Type;
+
+/* Region shareability attributes */
+typedef enum
+{
+ NON_SHARED,
+ SHARED,
+} mmu_shared_Type;
+
+/* Region security attributes */
+typedef enum
+{
+ SECURE,
+ NON_SECURE,
+} mmu_secure_Type;
+
+/* Region access attributes */
+typedef enum
+{
+ NO_ACCESS,
+ RW,
+ READ,
+} mmu_access_Type;
+
+/* Memory Region definition */
+typedef struct RegionStruct {
+ mmu_region_size_Type rg_t;
+ mmu_memory_Type mem_t;
+ uint8_t domain;
+ mmu_cacheability_Type inner_norm_t;
+ mmu_cacheability_Type outer_norm_t;
+ mmu_ecc_check_Type e_t;
+ mmu_execute_Type xn_t;
+ mmu_global_Type g_t;
+ mmu_secure_Type sec_t;
+ mmu_access_Type priv_t;
+ mmu_access_Type user_t;
+ mmu_shared_Type sh_t;
+
+} mmu_region_attributes_Type;
+
+/** \brief Set section execution-never attribute
+
+ The function sets section execution-never attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] xn Section execution-never attribute : EXECUTE , NON_EXECUTE.
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_section(uint32_t *descriptor_l1, mmu_execute_Type xn)
+{
+ *descriptor_l1 &= SECTION_XN_MASK;
+ *descriptor_l1 |= ((xn & 0x1) << SECTION_XN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section domain
+
+ The function sets section domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Section domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_section(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= SECTION_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xF) << SECTION_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section parity check
+
+ The function sets section parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_section(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set section access privileges
+
+ The function sets section access privileges
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_section(uint32_t *descriptor_l1, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x6; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l1 &= SECTION_AP_MASK;
+ *descriptor_l1 |= (ap & 0x3) << SECTION_AP_SHIFT;
+ *descriptor_l1 |= ((ap & 0x4)>>2) << SECTION_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set section shareability
+
+ The function sets section shareability
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_section(uint32_t *descriptor_l1, mmu_shared_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_S_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Global attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] g_bit Section attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_section(uint32_t *descriptor_l1, mmu_global_Type g_bit)
+{
+ *descriptor_l1 &= SECTION_NG_MASK;
+ *descriptor_l1 |= ((g_bit & 0x1) << SECTION_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Security attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_section(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_NS_SHIFT);
+ return 0;
+}
+
+/* Page 4k or 64k */
+/** \brief Set 4k/64k page execution-never attribute
+
+ The function sets 4k/64k page execution-never attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] xn Page execution-never attribute : EXECUTE , NON_EXECUTE.
+ \param [in] page Page size: PAGE_4k, PAGE_64k,
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_page(uint32_t *descriptor_l2, mmu_execute_Type xn, mmu_region_size_Type page)
+{
+ if (page == PAGE_4k)
+ {
+ *descriptor_l2 &= PAGE_XN_4K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_4K_SHIFT);
+ }
+ else
+ {
+ *descriptor_l2 &= PAGE_XN_64K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_64K_SHIFT);
+ }
+ return 0;
+}
+
+/** \brief Set 4k/64k page domain
+
+ The function sets 4k/64k page domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Page domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_page(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= PAGE_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xf) << PAGE_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page parity check
+
+ The function sets 4k/64k page parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_page(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page access privileges
+
+ The function sets 4k/64k page access privileges
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_page(uint32_t *descriptor_l2, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x6; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l2 &= PAGE_AP_MASK;
+ *descriptor_l2 |= (ap & 0x3) << PAGE_AP_SHIFT;
+ *descriptor_l2 |= ((ap & 0x4)>>2) << PAGE_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page shareability
+
+ The function sets 4k/64k page shareability
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] s_bit 4k/64k page shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_page(uint32_t *descriptor_l2, mmu_shared_Type s_bit)
+{
+ *descriptor_l2 &= PAGE_S_MASK;
+ *descriptor_l2 |= ((s_bit & 0x1) << PAGE_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Global attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] g_bit 4k/64k page attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_page(uint32_t *descriptor_l2, mmu_global_Type g_bit)
+{
+ *descriptor_l2 &= PAGE_NG_MASK;
+ *descriptor_l2 |= ((g_bit & 0x1) << PAGE_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Security attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit 4k/64k page Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_page(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= PAGE_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << PAGE_NS_SHIFT);
+ return 0;
+}
+
+
+/** \brief Set Section memory attributes
+
+ The function sets section memory attributes
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] mem Section memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_section(uint32_t *descriptor_l1, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner)
+{
+ *descriptor_l1 &= SECTION_TEXCB_MASK;
+
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l1 |= 1 << SECTION_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT) | (1 << SECTION_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT) | (1 << SECTION_TEX0_SHIFT);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page memory attributes
+
+ The function sets 4k/64k page memory attributes
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] mem 4k/64k page memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_page(uint32_t *descriptor_l2, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner, mmu_region_size_Type page)
+{
+ *descriptor_l2 &= PAGE_4K_TEXCB_MASK;
+
+ if (page == PAGE_64k)
+ {
+ //same as section
+ __memory_section(descriptor_l2, mem, outer, inner);
+ }
+ else
+ {
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l2 |= 1 << PAGE_4K_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT) | (1 << PAGE_4K_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT) | (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Create a L1 section descriptor
+
+ The function creates a section descriptor.
+
+ Assumptions:
+ - 16MB super sections not suported
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg Section attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_section_descriptor(uint32_t *descriptor, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+
+ __memory_section(descriptor, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t);
+ __xn_section(descriptor,reg.xn_t);
+ __domain_section(descriptor, reg.domain);
+ __p_section(descriptor, reg.e_t);
+ __ap_section(descriptor, reg.priv_t, reg.user_t, 1);
+ __shared_section(descriptor,reg.sh_t);
+ __global_section(descriptor,reg.g_t);
+ __secure_section(descriptor,reg.sec_t);
+ *descriptor &= SECTION_MASK;
+ *descriptor |= SECTION_DESCRIPTOR;
+
+ return 0;
+
+}
+
+
+/** \brief Create a L1 and L2 4k/64k page descriptor
+
+ The function creates a 4k/64k page descriptor.
+ Assumptions:
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg 4k/64k page attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_page_descriptor(uint32_t *descriptor, uint32_t *descriptor2, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+ *descriptor2 = 0;
+
+ switch (reg.rg_t)
+ {
+ case PAGE_4k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_4k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_4k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_4K_MASK;
+ *descriptor2 |= PAGE_L2_4K_DESC;
+ break;
+
+ case PAGE_64k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_64k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_64k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_64K_MASK;
+ *descriptor2 |= PAGE_L2_64K_DESC;
+ break;
+
+ case SECTION:
+ //error
+ break;
+
+ }
+
+ return 0;
+
+}
+
+/** \brief Create a 1MB Section
+
+ \param [in] ttb Translation table base address
+ \param [in] base_address Section base address
+ \param [in] count Number of sections to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTSection(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1)
+{
+ uint32_t offset;
+ uint32_t entry;
+ uint32_t i;
+
+ offset = base_address >> 20;
+ entry = (base_address & 0xFFF00000) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb = ttb + offset;
+
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb++ = entry;
+ entry += OFFSET_1M;
+ }
+}
+
+/** \brief Create a 4k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 4k base address
+ \param [in] count Number of 4k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_4k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFFF000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_4K;
+ }
+}
+
+/** \brief Create a 64k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 64k base address
+ \param [in] count Number of 64k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_64k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i,j;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFF0000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //create 16 entries
+ for (j = 0; j < 16; j++)
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_64K;
+ }
+}
+
+/*@} end of MMU_Functions */
+#endif
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_APPNEARME_MICRONFCBOARD/core_cm0.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,682 @@
+/**************************************************************************//**
+ * @file core_cm0.h
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M0
+ @{
+ */
+
+/* CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_APPNEARME_MICRONFCBOARD/core_cm0plus.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,793 @@
+/**************************************************************************//**
+ * @file core_cm0plus.h
+ * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0PLUS_H_GENERIC
+#define __CORE_CM0PLUS_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex-M0+
+ @{
+ */
+
+/* CMSIS CM0P definitions */
+#define __CM0PLUS_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0PLUS_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16) | \
+ __CM0PLUS_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0PLUS_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0PLUS_H_DEPENDANT
+#define __CORE_CM0PLUS_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0PLUS_REV
+ #define __CM0PLUS_REV 0x0000
+ #warning "__CM0PLUS_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __VTOR_PRESENT
+ #define __VTOR_PRESENT 0
+ #warning "__VTOR_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex-M0+ */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+#if (__VTOR_PRESENT == 1)
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+#else
+ uint32_t RESERVED0;
+#endif
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if (__VTOR_PRESENT == 1)
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 8 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 8 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0+ Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0PLUS_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_APPNEARME_MICRONFCBOARD/core_cm3.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,1627 @@
+/**************************************************************************//**
+ * @file core_cm3.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM3_H_GENERIC
+#define __CORE_CM3_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M3
+ @{
+ */
+
+/* CMSIS CM3 definitions */
+#define __CM3_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | \
+ __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x03) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI__VFP_SUPPORT____
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM3_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM3_H_DEPENDANT
+#define __CORE_CM3_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM3_REV
+ #define __CM3_REV 0x0200
+ #warning "__CM3_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M3 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#if (__CM3_REV < 0x0201) /* core r2p1 */
+#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#else
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+#else
+ uint32_t RESERVED1[1];
+#endif
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM3_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_APPNEARME_MICRONFCBOARD/core_cm4.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,1772 @@
+/**************************************************************************//**
+ * @file core_cm4.h
+ * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_H_GENERIC
+#define __CORE_CM4_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M4
+ @{
+ */
+
+/* CMSIS CM4 definitions */
+#define __CM4_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM4_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16) | \
+ __CM4_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x04) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+#include <core_cm4_simd.h> /* Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CM4_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM4_H_DEPENDANT
+#define __CORE_CM4_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM4_REV
+ #define __CM4_REV 0x0000
+ #warning "__CM4_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 0
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M4 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ - Core FPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISOOFP_Pos 9 /*!< ACTLR: DISOOFP Position */
+#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */
+
+#define SCnSCB_ACTLR_DISFPCA_Pos 8 /*!< ACTLR: DISFPCA Position */
+#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_FPU Floating Point Unit (FPU)
+ \brief Type definitions for the Floating Point Unit (FPU)
+ @{
+ */
+
+/** \brief Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __IO uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
+ __IO uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
+ __IO uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
+ __I uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
+ __I uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register */
+#define FPU_FPCCR_ASPEN_Pos 31 /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos 30 /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos 8 /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos 6 /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos 5 /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos 4 /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos 3 /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos 1 /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos 0 /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk (1UL << FPU_FPCCR_LSPACT_Pos) /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register */
+#define FPU_FPCAR_ADDRESS_Pos 3 /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register */
+#define FPU_FPDSCR_AHP_Pos 26 /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos 25 /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos 24 /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos 22 /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 */
+#define FPU_MVFR0_FP_rounding_modes_Pos 28 /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos 24 /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos 20 /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos 16 /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos 12 /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos 8 /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos 4 /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos 0 /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL << FPU_MVFR0_A_SIMD_registers_Pos) /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 */
+#define FPU_MVFR1_FP_fused_MAC_Pos 28 /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos 24 /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos 4 /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos 0 /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk (0xFUL << FPU_MVFR1_FtZ_mode_Pos) /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+#if (__FPU_PRESENT == 1)
+ #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
+ #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+/* NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); enable interrupt */
+ NVIC->ISER[(uint32_t)((int32_t)IRQn) >> 5] = (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM4_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_APPNEARME_MICRONFCBOARD/core_cm4_simd.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,673 @@
+/**************************************************************************//**
+ * @file core_cm4_simd.h
+ * @brief CMSIS Cortex-M4 SIMD Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_SIMD_H
+#define __CORE_CM4_SIMD_H
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ ******************************************************************************/
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#define __SADD8 __sadd8
+#define __QADD8 __qadd8
+#define __SHADD8 __shadd8
+#define __UADD8 __uadd8
+#define __UQADD8 __uqadd8
+#define __UHADD8 __uhadd8
+#define __SSUB8 __ssub8
+#define __QSUB8 __qsub8
+#define __SHSUB8 __shsub8
+#define __USUB8 __usub8
+#define __UQSUB8 __uqsub8
+#define __UHSUB8 __uhsub8
+#define __SADD16 __sadd16
+#define __QADD16 __qadd16
+#define __SHADD16 __shadd16
+#define __UADD16 __uadd16
+#define __UQADD16 __uqadd16
+#define __UHADD16 __uhadd16
+#define __SSUB16 __ssub16
+#define __QSUB16 __qsub16
+#define __SHSUB16 __shsub16
+#define __USUB16 __usub16
+#define __UQSUB16 __uqsub16
+#define __UHSUB16 __uhsub16
+#define __SASX __sasx
+#define __QASX __qasx
+#define __SHASX __shasx
+#define __UASX __uasx
+#define __UQASX __uqasx
+#define __UHASX __uhasx
+#define __SSAX __ssax
+#define __QSAX __qsax
+#define __SHSAX __shsax
+#define __USAX __usax
+#define __UQSAX __uqsax
+#define __UHSAX __uhsax
+#define __USAD8 __usad8
+#define __USADA8 __usada8
+#define __SSAT16 __ssat16
+#define __USAT16 __usat16
+#define __UXTB16 __uxtb16
+#define __UXTAB16 __uxtab16
+#define __SXTB16 __sxtb16
+#define __SXTAB16 __sxtab16
+#define __SMUAD __smuad
+#define __SMUADX __smuadx
+#define __SMLAD __smlad
+#define __SMLADX __smladx
+#define __SMLALD __smlald
+#define __SMLALDX __smlaldx
+#define __SMUSD __smusd
+#define __SMUSDX __smusdx
+#define __SMLSD __smlsd
+#define __SMLSDX __smlsdx
+#define __SMLSLD __smlsld
+#define __SMLSLDX __smlsldx
+#define __SEL __sel
+#define __QADD __qadd
+#define __QSUB __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
+ ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
+
+#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
+ ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
+
+#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+ ((int64_t)(ARG3) << 32) ) >> 32))
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_iar.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_ccs.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLALD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLALDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLSLD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLSLDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ if (ARG3 == 0) \
+ __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
+ else \
+ __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+/* not yet supported */
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CORE_CM4_SIMD_H */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_APPNEARME_MICRONFCBOARD/core_cmFunc.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,636 @@
+/**************************************************************************//**
+ * @file core_cmFunc.h
+ * @brief CMSIS Cortex-M Core Function Access Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ register uint32_t __regIPSR __ASM("ipsr");
+ return(__regIPSR);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ register uint32_t __regXPSR __ASM("xpsr");
+ return(__regXPSR);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ return(__regProcessStackPointer);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ __regProcessStackPointer = topOfProcStack;
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ return(__regMainStackPointer);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ __regMainStackPointer = topOfMainStack;
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0xff);
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/** \brief Enable IRQ Interrupts
+
+ This function enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ uint32_t result;
+
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all instrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CMFUNC_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_APPNEARME_MICRONFCBOARD/core_cmInstr.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,688 @@
+/**************************************************************************//**
+ * @file core_cmInstr.h
+ * @brief CMSIS Cortex-M Core Instruction Access Header File
+ * @version V3.20
+ * @date 05. March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __nop
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+#define __WFI __wfi
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __wfe
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __sev
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+#define __ISB() __isb(0xF)
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() __dsb(0xF)
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() __dmb(0xF)
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __rev
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+ rev16 r0, r0
+ bx lr
+}
+#endif
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+ revsh r0, r0
+ bx lr
+}
+#endif
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+#define __ROR __ror
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __breakpoint(value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __RBIT __rbit
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXB(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXH(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXW(value, ptr) __strex(value, ptr)
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+#define __CLREX __clrex
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT __ssat
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __usat
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __clz
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constrant "l"
+ * Otherwise, use general registers, specified by constrant "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __NOP(void)
+{
+ __ASM volatile ("nop");
+}
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFI(void)
+{
+ __ASM volatile ("wfi");
+}
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFE(void)
+{
+ __ASM volatile ("wfe");
+}
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __SEV(void)
+{
+ __ASM volatile ("sev");
+}
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ISB(void)
+{
+ __ASM volatile ("isb");
+}
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DSB(void)
+{
+ __ASM volatile ("dsb");
+}
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void)
+{
+ __ASM volatile ("dmb");
+}
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+ return __builtin_bswap32(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ return (short)__builtin_bswap16(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32 - op2));
+}
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void)
+{
+ __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_APPNEARME_MICRONFCBOARD/power_api.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,82 @@
+/****************************************************************************
+ * $Id:: power_api.h 6249 2011-01-25 19:23:47Z usb01267 $
+ * Project: NXP LPC11Uxx software example
+ *
+ * Description:
+ * Power API Header File for NXP LPC11Uxx Device Series
+ *
+ ****************************************************************************
+ * Software that is described herein is for illustrative purposes only
+ * which provides customers with programming information regarding the
+ * products. This software is supplied "AS IS" without any warranties.
+ * NXP Semiconductors assumes no responsibility or liability for the
+ * use of the software, conveys no license or title under any patent,
+ * copyright, or mask work right to the product. NXP Semiconductors
+ * reserves the right to make changes in the software without
+ * notification. NXP Semiconductors also make no representation or
+ * warranty that such application will be suitable for the specified
+ * use without further testing or modification.
+****************************************************************************/
+#ifndef __LPC11UXX_POWER_API_H__
+#define __LPC11UXX_POWER_API_H__
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#define PWRROMD_PRESENT
+
+typedef struct _PWRD {
+ void (*set_pll)(unsigned int cmd[], unsigned int resp[]);
+ void (*set_power)(unsigned int cmd[], unsigned int resp[]);
+} PWRD;
+
+typedef struct _ROM {
+#ifdef USBROMD_PRESENT
+ const USB * pUSBD;
+#else
+ const unsigned p_usbd;
+#endif /* USBROMD_PRESENT */
+ const unsigned p_clib;
+ const unsigned p_cand;
+#ifdef PWRROMD_PRESENT
+ const PWRD * pPWRD;
+#else
+ const unsigned p_pwrd;
+#endif /* PWRROMD_PRESENT */
+ const unsigned p_dev1;
+ const unsigned p_dev2;
+ const unsigned p_dev3;
+ const unsigned p_dev4;
+} ROM;
+
+//PLL setup related definitions
+#define CPU_FREQ_EQU 0 //main PLL freq must be equal to the specified
+#define CPU_FREQ_LTE 1 //main PLL freq must be less than or equal the specified
+#define CPU_FREQ_GTE 2 //main PLL freq must be greater than or equal the specified
+#define CPU_FREQ_APPROX 3 //main PLL freq must be as close as possible the specified
+
+#define PLL_CMD_SUCCESS 0 //PLL setup successfully found
+#define PLL_INVALID_FREQ 1 //specified freq out of range (either input or output)
+#define PLL_INVALID_MODE 2 //invalid mode (see above for valid) specified
+#define PLL_FREQ_NOT_FOUND 3 //specified freq not found under specified conditions
+#define PLL_NOT_LOCKED 4 //PLL not locked => no changes to the PLL setup
+
+//power setup elated definitions
+#define PARAM_DEFAULT 0 //default power settings (voltage regulator, flash interface)
+#define PARAM_CPU_PERFORMANCE 1 //setup for maximum CPU performance (higher current, more computation)
+#define PARAM_EFFICIENCY 2 //balanced setting (power vs CPU performance)
+#define PARAM_LOW_CURRENT 3 //lowest active current, lowest CPU performance
+
+#define PARAM_CMD_SUCCESS 0 //power setting successfully found
+#define PARAM_INVALID_FREQ 1 //specified freq out of range (=0 or > 50 MHz)
+#define PARAM_INVALID_MODE 2 //specified mode not valid (see above for valid)
+
+#define MAX_CLOCK_KHZ_PARAM 50000
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __LPC11UXX_POWER_API_H__ */
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_APPNEARME_MICRONFCBOARD/system_LPC11Uxx.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,64 @@
+/**************************************************************************//**
+ * @file system_LPC11Uxx.h
+ * @brief CMSIS Cortex-M0 Device Peripheral Access Layer Header File
+ * for the NXP LPC11Uxx Device Series
+ * @version V1.10
+ * @date 24. November 2010
+ *
+ * @note
+ * Copyright (C) 2009-2010 ARM Limited. All rights reserved.
+ *
+ * @par
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+
+
+#ifndef __SYSTEM_LPC11Uxx_H
+#define __SYSTEM_LPC11Uxx_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+
+/**
+ * Initialize the system
+ *
+ * @param none
+ * @return none
+ *
+ * @brief Setup the microcontroller system.
+ * Initialize the System and update the SystemCoreClock variable.
+ */
+extern void SystemInit (void);
+
+/**
+ * Update SystemCoreClock variable
+ *
+ * @param none
+ * @return none
+ *
+ * @brief Updates the SystemCoreClock with current core Clock
+ * retrieved from cpu registers.
+ */
+extern void SystemCoreClockUpdate (void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __SYSTEM_LPC11Uxx_H */
Binary file TARGET_ARCH_BLE/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_ARCH_BLE/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_ARCH_BLE/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_ARCH_BLE/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_ARCH_BLE/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_ARCH_BLE/TOOLCHAIN_ARM_STD/system_nrf51.o has changed
Binary file TARGET_ARCH_BLE/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_ARCH_BLE/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_ARCH_BLE/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_ARCH_BLE/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_ARCH_BLE/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_ARCH_BLE/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_ARCH_BLE/TOOLCHAIN_IAR/startup_NRF51822_IAR.o has changed
Binary file TARGET_ARCH_BLE/TOOLCHAIN_IAR/system_nrf51.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_ARM_MICRO/system_LPC11Uxx.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_ARM_STD/system_LPC11Uxx.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_IAR/startup_LPC11xx.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_IAR/system_LPC11Uxx.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_can.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cec.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_crc.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dcmi_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_eth.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_fmpi2c.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_fmpi2c_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_irda.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_msp_template.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nand.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nor.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_qspi.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rng.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sai.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sai_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sd.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_spdifrx.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_spi.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sram.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_uart.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_usart.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_ll_usb.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/system_stm32f4xx.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_ARM_STD/system_LPC17xx.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_GCC_CS/libmbed.a has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_IAR/startup_LPC17xx.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_IAR/system_LPC17xx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_DELTA_DFCM_NNN40/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/nordic_sdk/components/libraries/crc16/crc16.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,51 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup crc_compute CRC compute
+ * @{
+ * @ingroup hci_transport
+ *
+ * @brief This module implements the CRC-16 calculation in the blocks.
+ */
+
+#ifndef CRC16_H__
+#define CRC16_H__
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**@brief Function for calculating CRC-16 in blocks.
+ *
+ * Feed each consecutive data block into this function, along with the current value of p_crc as
+ * returned by the previous call of this function. The first call of this function should pass NULL
+ * as the initial value of the crc in p_crc.
+ *
+ * @param[in] p_data The input data block for computation.
+ * @param[in] size The size of the input data block in bytes.
+ * @param[in] p_crc The previous calculated CRC-16 value or NULL if first call.
+ *
+ * @return The updated CRC-16 value, based on the input supplied.
+ */
+uint16_t crc16_compute(const uint8_t * p_data, uint32_t size, const uint16_t * p_crc);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // CRC16_H__
+
+/** @} */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_DELTA_DFCM_NNN40/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/nordic_sdk/components/libraries/scheduler/app_scheduler.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,152 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup app_scheduler Scheduler
+ * @{
+ * @ingroup app_common
+ *
+ * @brief The scheduler is used for transferring execution from the interrupt context to the main
+ * context.
+ *
+ * @details See @ref seq_diagrams_sched for sequence diagrams illustrating the flow of events
+ * when using the Scheduler.
+ *
+ * @section app_scheduler_req Requirements:
+ *
+ * @subsection main_context_logic Logic in main context:
+ *
+ * - Define an event handler for each type of event expected.
+ * - Initialize the scheduler by calling the APP_SCHED_INIT() macro before entering the
+ * application main loop.
+ * - Call app_sched_execute() from the main loop each time the application wakes up because of an
+ * event (typically when sd_app_evt_wait() returns).
+ *
+ * @subsection int_context_logic Logic in interrupt context:
+ *
+ * - In the interrupt handler, call app_sched_event_put()
+ * with the appropriate data and event handler. This will insert an event into the
+ * scheduler's queue. The app_sched_execute() function will pull this event and call its
+ * handler in the main context.
+ *
+ * @if (SD_S110 && !SD_S310)
+ * For an example usage of the scheduler, see the implementations of
+ * @ref ble_sdk_app_hids_mouse and @ref ble_sdk_app_hids_keyboard.
+ * @endif
+ *
+ * @image html scheduler_working.jpg The high level design of the scheduler
+ */
+
+#ifndef APP_SCHEDULER_H__
+#define APP_SCHEDULER_H__
+
+#include <stdint.h>
+#include "app_error.h"
+
+#define APP_SCHED_EVENT_HEADER_SIZE 8 /**< Size of app_scheduler.event_header_t (only for use inside APP_SCHED_BUF_SIZE()). */
+
+/**@brief Compute number of bytes required to hold the scheduler buffer.
+ *
+ * @param[in] EVENT_SIZE Maximum size of events to be passed through the scheduler.
+ * @param[in] QUEUE_SIZE Number of entries in scheduler queue (i.e. the maximum number of events
+ * that can be scheduled for execution).
+ *
+ * @return Required scheduler buffer size (in bytes).
+ */
+#define APP_SCHED_BUF_SIZE(EVENT_SIZE, QUEUE_SIZE) \
+ (((EVENT_SIZE) + APP_SCHED_EVENT_HEADER_SIZE) * ((QUEUE_SIZE) + 1))
+
+/**@brief Scheduler event handler type. */
+typedef void (*app_sched_event_handler_t)(void * p_event_data, uint16_t event_size);
+
+/**@brief Macro for initializing the event scheduler.
+ *
+ * @details It will also handle dimensioning and allocation of the memory buffer required by the
+ * scheduler, making sure the buffer is correctly aligned.
+ *
+ * @param[in] EVENT_SIZE Maximum size of events to be passed through the scheduler.
+ * @param[in] QUEUE_SIZE Number of entries in scheduler queue (i.e. the maximum number of events
+ * that can be scheduled for execution).
+ *
+ * @note Since this macro allocates a buffer, it must only be called once (it is OK to call it
+ * several times as long as it is from the same location, e.g. to do a reinitialization).
+ */
+#define APP_SCHED_INIT(EVENT_SIZE, QUEUE_SIZE) \
+ do \
+ { \
+ static uint32_t APP_SCHED_BUF[CEIL_DIV(APP_SCHED_BUF_SIZE((EVENT_SIZE), (QUEUE_SIZE)), \
+ sizeof(uint32_t))]; \
+ uint32_t ERR_CODE = app_sched_init((EVENT_SIZE), (QUEUE_SIZE), APP_SCHED_BUF); \
+ APP_ERROR_CHECK(ERR_CODE); \
+ } while (0)
+
+/**@brief Function for initializing the Scheduler.
+ *
+ * @details It must be called before entering the main loop.
+ *
+ * @param[in] max_event_size Maximum size of events to be passed through the scheduler.
+ * @param[in] queue_size Number of entries in scheduler queue (i.e. the maximum number of
+ * events that can be scheduled for execution).
+ * @param[in] p_evt_buffer Pointer to memory buffer for holding the scheduler queue. It must
+ * be dimensioned using the APP_SCHED_BUFFER_SIZE() macro. The buffer
+ * must be aligned to a 4 byte boundary.
+ *
+ * @note Normally initialization should be done using the APP_SCHED_INIT() macro, as that will both
+ * allocate the scheduler buffer, and also align the buffer correctly.
+ *
+ * @retval NRF_SUCCESS Successful initialization.
+ * @retval NRF_ERROR_INVALID_PARAM Invalid parameter (buffer not aligned to a 4 byte
+ * boundary).
+ */
+uint32_t app_sched_init(uint16_t max_event_size, uint16_t queue_size, void * p_evt_buffer);
+
+/**@brief Function for executing all scheduled events.
+ *
+ * @details This function must be called from within the main loop. It will execute all events
+ * scheduled since the last time it was called.
+ */
+void app_sched_execute(void);
+
+/**@brief Function for scheduling an event.
+ *
+ * @details Puts an event into the event queue.
+ *
+ * @param[in] p_event_data Pointer to event data to be scheduled.
+ * @param[in] event_size Size of event data to be scheduled.
+ * @param[in] handler Event handler to receive the event.
+ *
+ * @return NRF_SUCCESS on success, otherwise an error code.
+ */
+uint32_t app_sched_event_put(void * p_event_data,
+ uint16_t event_size,
+ app_sched_event_handler_t handler);
+
+#ifdef APP_SCHEDULER_WITH_PAUSE
+/**@brief A function to pause the scheduler.
+ *
+ * @details When the scheduler is paused events are not pulled from the scheduler queue for
+ * processing. The function can be called multiple times. To unblock the scheduler the
+ * function @ref app_sched_resume has to be called the same number of times.
+ */
+void app_sched_pause(void);
+
+/**@brief A function to resume a scheduler.
+ *
+ * @details To unblock the scheduler this function has to be called the same number of times as
+ * @ref app_sched_pause function.
+ */
+void app_sched_resume(void);
+#endif
+#endif // APP_SCHEDULER_H__
+
+/** @} */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_DELTA_DFCM_NNN40/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/nordic_sdk/components/libraries/util/app_error.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,92 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup app_error Common application error handler
+ * @{
+ * @ingroup app_common
+ *
+ * @brief Common application error handler and macros for utilizing a common error handler.
+ */
+
+#ifndef APP_ERROR_H__
+#define APP_ERROR_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "nrf_error.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**@brief Function for error handling, which is called when an error has occurred.
+ *
+ * @param[in] error_code Error code supplied to the handler.
+ * @param[in] line_num Line number where the handler is called.
+ * @param[in] p_file_name Pointer to the file name.
+ */
+void app_error_handler(uint32_t error_code, uint32_t line_num, const uint8_t * p_file_name);
+
+#ifdef __cplusplus
+}
+#endif
+
+/**@brief Macro for calling error handler function.
+ *
+ * @param[in] ERR_CODE Error code supplied to the error handler.
+ */
+#ifdef DEBUG
+#define APP_ERROR_HANDLER(ERR_CODE) \
+ do \
+ { \
+ app_error_handler((ERR_CODE), __LINE__, (uint8_t*) __FILE__); \
+ } while (0)
+#else
+#define APP_ERROR_HANDLER(ERR_CODE) \
+ do \
+ { \
+ app_error_handler((ERR_CODE), 0, 0); \
+ } while (0)
+#endif
+/**@brief Macro for calling error handler function if supplied error code any other than NRF_SUCCESS.
+ *
+ * @param[in] ERR_CODE Error code supplied to the error handler.
+ */
+#define APP_ERROR_CHECK(ERR_CODE) \
+ do \
+ { \
+ const uint32_t LOCAL_ERR_CODE = (ERR_CODE); \
+ if (LOCAL_ERR_CODE != NRF_SUCCESS) \
+ { \
+ APP_ERROR_HANDLER(LOCAL_ERR_CODE); \
+ } \
+ } while (0)
+
+/**@brief Macro for calling error handler function if supplied boolean value is false.
+ *
+ * @param[in] BOOLEAN_VALUE Boolean value to be evaluated.
+ */
+#define APP_ERROR_CHECK_BOOL(BOOLEAN_VALUE) \
+ do \
+ { \
+ const uint32_t LOCAL_BOOLEAN_VALUE = (BOOLEAN_VALUE); \
+ if (!LOCAL_BOOLEAN_VALUE) \
+ { \
+ APP_ERROR_HANDLER(0); \
+ } \
+ } while (0)
+
+#endif // APP_ERROR_H__
+
+/** @} */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_DELTA_DFCM_NNN40/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/nordic_sdk/components/libraries/util/app_util.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,234 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup app_util Utility Functions and Definitions
+ * @{
+ * @ingroup app_common
+ *
+ * @brief Various types and definitions available to all applications.
+ */
+
+#ifndef APP_UTIL_H__
+#define APP_UTIL_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "compiler_abstraction.h"
+
+enum
+{
+ UNIT_0_625_MS = 625, /**< Number of microseconds in 0.625 milliseconds. */
+ UNIT_1_25_MS = 1250, /**< Number of microseconds in 1.25 milliseconds. */
+ UNIT_10_MS = 10000 /**< Number of microseconds in 10 milliseconds. */
+};
+
+/**@brief Macro for doing static (i.e. compile time) assertion.
+ *
+ * @note If the assertion fails when compiling using Keil, the compiler will report error message
+ * "error: #94: the size of an array must be greater than zero" (while gcc will list the
+ * symbol static_assert_failed, making the error message more readable).
+ * If the supplied expression can not be evaluated at compile time, Keil will report
+ * "error: #28: expression must have a constant value".
+ *
+ * @note The macro is intentionally implemented not using do while(0), allowing it to be used
+ * outside function blocks (e.g. close to global type- and variable declarations).
+ * If used in a code block, it must be used before any executable code in this block.
+ *
+ * @param[in] EXPR Constant expression to be verified.
+ */
+
+#if defined(__GNUC__)
+#define STATIC_ASSERT(EXPR) typedef char __attribute__((unused)) static_assert_failed[(EXPR) ? 1 : -1]
+#elif defined(__ICCARM__)
+#define STATIC_ASSERT(EXPR) extern char static_assert_failed[(EXPR) ? 1 : -1]
+#else
+#define STATIC_ASSERT(EXPR) typedef char static_assert_failed[(EXPR) ? 1 : -1]
+#endif
+
+
+/**@brief type for holding an encoded (i.e. little endian) 16 bit unsigned integer. */
+typedef uint8_t uint16_le_t[2];
+
+/**@brief type for holding an encoded (i.e. little endian) 32 bit unsigned integer. */
+typedef uint8_t uint32_le_t[4];
+
+/**@brief Byte array type. */
+typedef struct
+{
+ uint16_t size; /**< Number of array entries. */
+ uint8_t * p_data; /**< Pointer to array entries. */
+} uint8_array_t;
+
+/**@brief Perform rounded integer division (as opposed to truncating the result).
+ *
+ * @param[in] A Numerator.
+ * @param[in] B Denominator.
+ *
+ * @return Rounded (integer) result of dividing A by B.
+ */
+#define ROUNDED_DIV(A, B) (((A) + ((B) / 2)) / (B))
+
+/**@brief Check if the integer provided is a power of two.
+ *
+ * @param[in] A Number to be tested.
+ *
+ * @return true if value is power of two.
+ * @return false if value not power of two.
+ */
+#define IS_POWER_OF_TWO(A) ( ((A) != 0) && ((((A) - 1) & (A)) == 0) )
+
+/**@brief To convert milliseconds to ticks.
+ * @param[in] TIME Number of milliseconds to convert.
+ * @param[in] RESOLUTION Unit to be converted to in [us/ticks].
+ */
+#define MSEC_TO_UNITS(TIME, RESOLUTION) (((TIME) * 1000) / (RESOLUTION))
+
+
+/**@brief Perform integer division, making sure the result is rounded up.
+ *
+ * @details One typical use for this is to compute the number of objects with size B is needed to
+ * hold A number of bytes.
+ *
+ * @param[in] A Numerator.
+ * @param[in] B Denominator.
+ *
+ * @return Integer result of dividing A by B, rounded up.
+ */
+#define CEIL_DIV(A, B) \
+ /*lint -save -e573 */ \
+ ((((A) - 1) / (B)) + 1) \
+ /*lint -restore */
+
+/**@brief Function for encoding a uint16 value.
+ *
+ * @param[in] value Value to be encoded.
+ * @param[out] p_encoded_data Buffer where the encoded data is to be written.
+ *
+ * @return Number of bytes written.
+ */
+static __INLINE uint8_t uint16_encode(uint16_t value, uint8_t * p_encoded_data)
+{
+ p_encoded_data[0] = (uint8_t) ((value & 0x00FF) >> 0);
+ p_encoded_data[1] = (uint8_t) ((value & 0xFF00) >> 8);
+ return sizeof(uint16_t);
+}
+
+/**@brief Function for encoding a uint32 value.
+ *
+ * @param[in] value Value to be encoded.
+ * @param[out] p_encoded_data Buffer where the encoded data is to be written.
+ *
+ * @return Number of bytes written.
+ */
+static __INLINE uint8_t uint32_encode(uint32_t value, uint8_t * p_encoded_data)
+{
+ p_encoded_data[0] = (uint8_t) ((value & 0x000000FF) >> 0);
+ p_encoded_data[1] = (uint8_t) ((value & 0x0000FF00) >> 8);
+ p_encoded_data[2] = (uint8_t) ((value & 0x00FF0000) >> 16);
+ p_encoded_data[3] = (uint8_t) ((value & 0xFF000000) >> 24);
+ return sizeof(uint32_t);
+}
+
+/**@brief Function for decoding a uint16 value.
+ *
+ * @param[in] p_encoded_data Buffer where the encoded data is stored.
+ *
+ * @return Decoded value.
+ */
+static __INLINE uint16_t uint16_decode(const uint8_t * p_encoded_data)
+{
+ return ( (((uint16_t)((uint8_t *)p_encoded_data)[0])) |
+ (((uint16_t)((uint8_t *)p_encoded_data)[1]) << 8 ));
+}
+
+/**@brief Function for decoding a uint32 value.
+ *
+ * @param[in] p_encoded_data Buffer where the encoded data is stored.
+ *
+ * @return Decoded value.
+ */
+static __INLINE uint32_t uint32_decode(const uint8_t * p_encoded_data)
+{
+ return ( (((uint32_t)((uint8_t *)p_encoded_data)[0]) << 0) |
+ (((uint32_t)((uint8_t *)p_encoded_data)[1]) << 8) |
+ (((uint32_t)((uint8_t *)p_encoded_data)[2]) << 16) |
+ (((uint32_t)((uint8_t *)p_encoded_data)[3]) << 24 ));
+}
+
+/** @brief Function for converting the input voltage (in milli volts) into percentage of 3.0 Volts.
+ *
+ * @details The calculation is based on a linearized version of the battery's discharge
+ * curve. 3.0V returns 100% battery level. The limit for power failure is 2.1V and
+ * is considered to be the lower boundary.
+ *
+ * The discharge curve for CR2032 is non-linear. In this model it is split into
+ * 4 linear sections:
+ * - Section 1: 3.0V - 2.9V = 100% - 42% (58% drop on 100 mV)
+ * - Section 2: 2.9V - 2.74V = 42% - 18% (24% drop on 160 mV)
+ * - Section 3: 2.74V - 2.44V = 18% - 6% (12% drop on 300 mV)
+ * - Section 4: 2.44V - 2.1V = 6% - 0% (6% drop on 340 mV)
+ *
+ * These numbers are by no means accurate. Temperature and
+ * load in the actual application is not accounted for!
+ *
+ * @param[in] mvolts The voltage in mV
+ *
+ * @return Battery level in percent.
+*/
+static __INLINE uint8_t battery_level_in_percent(const uint16_t mvolts)
+{
+ uint8_t battery_level;
+
+ if (mvolts >= 3000)
+ {
+ battery_level = 100;
+ }
+ else if (mvolts > 2900)
+ {
+ battery_level = 100 - ((3000 - mvolts) * 58) / 100;
+ }
+ else if (mvolts > 2740)
+ {
+ battery_level = 42 - ((2900 - mvolts) * 24) / 160;
+ }
+ else if (mvolts > 2440)
+ {
+ battery_level = 18 - ((2740 - mvolts) * 12) / 300;
+ }
+ else if (mvolts > 2100)
+ {
+ battery_level = 6 - ((2440 - mvolts) * 6) / 340;
+ }
+ else
+ {
+ battery_level = 0;
+ }
+
+ return battery_level;
+}
+
+/**@brief Function for checking if a pointer value is aligned to a 4 byte boundary.
+ *
+ * @param[in] p Pointer value to be checked.
+ *
+ * @return TRUE if pointer is aligned to a 4 byte boundary, FALSE otherwise.
+ */
+static __INLINE bool is_word_aligned(void * p)
+{
+ return (((uintptr_t)p & 0x03) == 0);
+}
+
+#endif // APP_UTIL_H__
+
+/** @} */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_DELTA_DFCM_NNN40/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/nrf51822_bootloader.hex Tue Jun 09 14:29:26 2015 +0100 @@ -0,0 +1,920 @@ +:020000040003F7 +:10C000007034002049D903005BD903005DD90300D7 +:10C010000000000000000000000000000000000020 +:10C020000000000000000000000000005FD90300D5 +:10C03000000000000000000061D9030063D9030084 +:10C0400065D9030065D9030065D9030065D90300EC +:10C0500065D90300000000001DE9030065D9030055 +:10C0600065D9030065D9030065D9030065D90300CC +:10C0700065D9030065D9030065D9030065D90300BC +:10C0800065D9030095DC030065D9030065D9030079 +:10C09000CBDC030065D9030071E8030065D9030018 +:10C0A00065D9030065D9030000000000000000000E +:10C0B0000000000000000000000000000000000080 +:10C0C00000F002F800F040F80CA030C8083824183E +:10C0D0002D18A246671EAB4654465D46AC4201D1C0 +:10C0E00000F032F87E460F3E0FCCB64601263342B2 +:10C0F00000D0FB1AA246AB4633431847F036000087 +:10C1000010370000103A02D378C878C1FAD8520725 +:10C1100001D330C830C101D504680C6070470000FD +:10C120000023002400250026103A01D378C1FBD853 +:10C13000520700D330C100D50B6070471FB5C04611 +:10C14000C0461FBD10B510BD03F0A4FA1146FFF79D +:10C15000F5FF00F0B0F803F0BCFA03B4FFF7F2FF0C +:10C1600003BC03F0C1FA0000144C144D0646064F00 +:10C17000F0B4034C024D024E014FF0B407480047A3 +:10C18000000000000000000000000021000000008E +:10C19000000000000000000000000000F9FFFFFFA9 +:10C1A000016881F308884068034AEFF305839A42E7 +:10C1B000DAD1024CA646004700000000FFFFFFFF57 +:10C1C000401E00BF00BF00BF00BF00BF00BF00BFD8 +:10C1D00000BF00BF00BF00BF00BFF1D1704700002B +:10C1E000401E00BF00BF00BF00BF00BF00BF00BFB8 +:10C1F00000BF00BF00BF00BF00BFF1D1704700000B +:10C2000070B505460C46164602E00FCC0FC5103E31 +:10C21000102EFAD2082E02D303CC03C5083E042EFA +:10C2200007D301CC01C5361F03E021782970641CB7 +:10C230006D1C761EF9D270BD00F0C2F800F0C0F897 +:10C2400010B502F0A5FE10BD10B5754C86B01ECC21 +:10C2500003946C460EC4002803D0684618DF0028FB +:10C2600019D10F20800313DF002814D16D4B502209 +:10C270006D49082002F0D8FA00280CD10490012062 +:10C280006946087404A860DF002804D1674802F0FA +:10C29000E7FA002801D000F093F806B010BD624A1A +:10C2A00010B550321421082002F0B0FB002801D054 +:10C2B00000F086F810BD08B55D48C069B12819D0F6 +:10C2C00000245C480F2140698903884210D1012075 +:10C2D0000007006901218902884209D1564800906F +:10C2E000564B05220321002001F016FD002803D043 +:10C2F00000F066F80124E4E750490120143902F007 +:10C300004DFB0028F4D103204D490004086000F0E3 +:10C31000BFFC00F004FD012500280ED000F00EFD4A +:10C320000028E5D120466840FFF78EFFFFF7B7FFF2 +:10C3300000F02DFD0028DBD105E020466840FFF726 +:10C3400083FFFFF7ACFF3F4800690006C00F04D031 +:10C35000002020433C4C07D101E00120F9E7A06810 +:10C3600000F0E0FB00280AD1FF203DDF0028BFD10C +:10C3700000F09FFC0028BBD10A2000F029F8A0683B +:10C3800000F0D0FB00280ED0082000F021F8092092 +:10C3900000F01EF80A2000F01BF80F2000F018F83B +:10C3A000A06800F092FC082000F012F8092000F0CC +:10C3B0000FF80A2000F00CF80F2000F009F897E7BA +:10C3C000BFF34F8F22492148C860BFF34F8FFEE76C +:10C3D000012181401B48C16070471CB5019100904C +:10C3E0001C4A0821684602F025FB1CBD10B500213F +:10C3F000194A084602F01EFB10BD10B50246082976 +:10C4000001D0FFF7DDFF11685068884710BD10B5F7 +:10C41000002901D0FFF7D4FF02F0C8F910BD0000D9 +:10C4200010F70300EDC303006023002041C20300A6 +:10C430000005004000100010DBC303002021002095 +:10C440001C07005000050050003000000400FA05F1 +:10C4500000ED00E0FBC303000FC4030070B5F94D0D +:10C460001E46AB6988B01446002B22D0284680684F +:10C47000022902D004291CD105E0052819D1324631 +:10C480002146032014E0022813D11822EE4902A805 +:10C49000FFF7B6FE069807990090019102A80FC811 +:10C4A00000F07AFB0320A860AB69324621460220E7 +:10C4B0009847200003D0E5A25D21FFF7BDFE08B03C +:10C4C00070BD4CB5DF4E0120307006200195009400 +:10C4D00000F062FB4CBD10B5DA4C2078002801D08A +:10C4E000082010BD206901F004FD002803D0D7A268 +:10C4F0008021FFF7A1FE0F2100228904206901F0AD +:10C50000BBFC040003D0D1A28321FFF795FE204697 +:10C5100010BDCC4910B5CB48243141610221816066 +:10C52000C168243002F03EFF002803D0C7A2992141 +:10C53000FFF782FE10BDC349C2481C31416103218F +:10C5400081608369002B03D0002211460220184726 +:10C55000704700B5BB4987B049886A4611810321FD +:10C56000090389680691C84901204A6803928A68CC +:10C570000492C9680591069A0091019202A90EC918 +:10C5800000F00AFB002007B000BD30B5BE4CAD483E +:10C5900087B02430E16802F005FF002803D0ABA289 +:10C5A000F321FFF749FEA748E2681C3041680023E9 +:10C5B000083002F0C7FE05000DD1A249019049885C +:10C5C0006A461181E1680591069A0091019202A9DB +:10C5D0000EC900F0E1FA284607B030BD00B5994910 +:10C5E00087B049886A461181A74903204A680392A7 +:10C5F0008A680492C9680591069A0091019202A97D +:10C600000EC900F0C9FA0020BDE7F0B58E4A91B01E +:10C61000183207CA02AB07C303263603B0680F21DE +:10C620008903091A874C4908471800256570214677 +:10C630006580243102A802F069FE002823D121463A +:10C640002431B068486024390A46526ACA610F2111 +:10C650008903091A4908401821461C31486005A879 +:10C6600000F0A9FB0798FE2802D13868401C12D0C0 +:10C670000F20B1688003401A410872481C3002F054 +:10C6800091FE002802D0A56011B0F0BD0DA90EC921 +:10C69000052000F081FA6B487C4A0021103001F03F +:10C6A0008FFB002804D0FF2168A24C31FFF7C4FDA6 +:10C6B0000F2100228904206901F0DEFB002804D04C +:10C6C000FF2162A25031FFF7B7FD01206560A06035 +:10C6D0000020D9E75B498861704770B542686A48B5 +:10C6E000146853689168D26804604360C2608160D6 +:10C6F0000078440701D5840705D19C0703D18C0736 +:10C7000001D1940701D0062070BD5B189A184D4DD9 +:10C710000F239B02EA60994214D85D495D4CC30720 +:10C7200009D08868EF218902081A90420AD35A4832 +:10C7300020605A480FE089680F239B03591A490863 +:10C74000914201D20C2070BD55492160800701D56E +:10C75000544800E054486060A868012802D00826C8 +:10C76000304670BDFFF7B7FE0600FAD12168E868D1 +:10C770008847F5E770B5050004D0287A800703D014 +:10C78000102070BD0E2070BD2E4CA068032805D06F +:10C79000042803D0052803D0082070BD0520A06020 +:10C7A0006868E168860060688019884204D90020C2 +:10C7B000C04360600C2070BDFFF78DFE0028FAD1E9 +:10C7C000A96832466368606902F0BCFD0028F2D1B6 +:10C7D000616889196160E2689142ECD0092070BDFE +:10C7E000F8B5184C0546A068032802D0042805D1E6 +:10C7F00001E00420A0606068002801D00820F8BD96 +:10C80000FFF769FE0028FAD11F4B0021103308E022 +:10C81000AA688E00965962789700521CDE516270A9 +:10C82000491C6A688A42F3D8F8BD70B5054CA06807 +:10C83000052805D10620A060E1686068884235D0EF +:10C84000082549E00020002020F703002F686F6DC5 +:10C85000652F7267726F7665722F706C61792F64C5 +:10C86000656D6F2D617070732F424C455F426F6F25 +:10C87000744C6F616465722F6466755F6475616C7A +:10C880005F62616E6B2E630000250020C3C403004D +:10C89000003000002C20002013C5030053C5030006 +:10C8A00037C50300DDC503008BC50300FFF713FE8A +:10C8B000050011D1606900224068E16802F0AAFD1C +:10C8C0006080834962780988002A03D0884201D0B9 +:10C8D0000B2070BD0720A060284670BD10B57D48B4 +:10C8E0008168072901D0082010BD006901F001FB13 +:10C8F000002803D0784A7949FFF79EFC75482C3010 +:10C900004068804710BD1CB507200195009400F0D9 +:10C9100043F91CBDF8B51C4617460D46064600F007 +:10C92000C1F8002817D001200003854207D923460B +:10C93000291B301B1A46FFF7EDFF00280BD13A46A2 +:10C940002946304600F0B9F8002804D13A46294675 +:10C95000304600F0A7F8F8BDF0B589B0684600F0A1 +:10C960002AFA049800282AD001210903079A4018BE +:10C97000904226D9501A45081046049A0C4687184A +:10C98000024668001618001908900320000380680A +:10C99000049988420DD261190846042200F08DF8EE +:10C9A00000280CD121460422084600F086F8002811 +:10C9B00005D1BA1B2B4630460899FFF7ABFF09B0EB +:10C9C000F0BD049A079800F078F8F8E700B58DB04C +:10C9D00004A800F0F0F9099800280DD00898002864 +:10C9E0000CD008990B9840180190002109980091EB +:10C9F00080080290684618DF0DB000BD03200003D8 +:10CA000080680F218903091A4908ECE700B58DB049 +:10CA100004A800F0D0F909980028EDD00F2108985B +:10CA2000890300280CD0089A0B9801918018029075 +:10CA300003220998009280080390684618DFDBE71C +:10CA40000320000380680A1A5208EEE730B591B05F +:10CA5000684600F0B0F90498002814D001210903B9 +:10CA6000079A4018904214D9501A43081046049A65 +:10CA70005C0082180019611803242403A468049D33 +:10CA8000AC4202D20E2011B030BD121AFFF742FFA5 +:10CA9000F9E703200CAB07C3049880080F900CA89B +:10CAA00018DFF0E71FB5032301909008039000936F +:10CAB0000291684618DF04B010BD1FB50123019034 +:10CAC0009008039000930291684618DFF3E7000096 +:10CAD00010250020002000204CC80300690200003F +:10CAE00010B5C3480368012B02D1022900D10160AF +:10CAF000100003D0BFA24221FFF79EFB10BD10B56E +:10CB0000BB4C40DF002803D0BAA25421FFF794FBAE +:10CB100002F006F82068022803D0032801D0042878 +:10CB2000EFD110BD38B50068401C19D0002468460C +:10CB300000F08AF900980168012910D18188002944 +:10CB40000AD0C168032000038068002202F062FC62 +:10CB500000998988814201D1012400E00024204607 +:10CB600038BD10B50446A2482021001D02F09CFBF0 +:10CB7000002803D09FA28921FFF75EFB9C48002379 +:10CB800020222146001D02F003FB002803D099A2B9 +:10CB90008F21FFF751FB10BD0FB438B5684600F088 +:10CBA00053F96846818A049DA1480122FF23904CD5 +:10CBB000002D20D0012D24D0032D38D00021022DAE +:10CBC00044D02A46062D49D01346FE22042B4FD0CE +:10CBD0001946052B53D0072909D100F067FC00281E +:10CBE00003D084A2ED21FFF727FB0420206038BC8E +:10CBF00008BC04B018478180089983600260C16056 +:10CC000010E08180079D06994919089D4919C16066 +:10CC1000A5218360016006990161079985614161E1 +:10CC20000999C16122608248FFF79BFFDFE7009905 +:10CC30000B6803608B888380C968C160AA2181600A +:10CC40000699016107994161089905E081800360B7 +:10CC5000C1600161836041618161E3E700F026FC0E +:10CC6000002803D063A2D321FFF7E6FA0320BDE733 +:10CC700081800260C160009989688160D3E7009972 +:10CC80000B6803608B888380C9688260C160CAE7D3 +:10CC90000EB568480090202001900120029002F01B +:10CCA000DDF9002804D152496846091D02F0FFF958 +:10CCB0000EBD10B5FFF7A9FC002805D100F02CFD32 +:10CCC0000446FFF71CFF204610BD70B511DF002899 +:10CCD00004D0FF2147A23B31FFF7AEFA56490020AE +:10CCE0000B68554C012180340A4682401A4204D018 +:10CCF000C506ED0E0A46AA402260401C2028F3D348 +:10CD000003242403A06813DF002804D0FF2139A2E4 +:10CD10004031FFF791FAA06800F092F870BD08B5B5 +:10CD2000684600F091F800980168A52904D0806851 +:10CD3000AA2801D0002008BD012008BD10B5FFF7CA +:10CD400085FE002803D1FFF761FE00281ED0642075 +:10CD500000F082FAFFF700FE002804D0FF2125A290 +:10CD60006531FFF769FAFFF771FE002804D0FF2153 +:10CD700020A26831FFF760FAFFF728FE040004D014 +:10CD8000FF211CA26B31FFF757FA204610BD00B5FA +:10CD900089B01822294902A8FFF732FA06980799A4 +:10CDA0000090019102A80FC8FFF7F6FEFFF7A7FE5B +:10CDB000002009B000BD10B50D4988B0044600231D +:10CDC0002022091D684602F024FA00982060684677 +:10CDD0008088A0800398E0600298A0600498206199 +:10CDE000059860610698A0610798E06108B010BDE1 +:10CDF000342000202F686F6D652F7267726F766523 +:10CE0000722F706C61792F64656D6F2D6170707316 +:10CE10002F424C455F426F6F744C6F616465722F97 +:10CE2000626F6F746C6F616465722E630000000046 +:10CE300050250020E1CA030000E100E044F70300B0 +:10CE400010B5FFF7ADF910BD014901607047000052 +:10CE500000FC030030B585B0002822D00388FA4CCE +:10CE6000A34220D0F94B1B78002B1CD0F74B102588 +:10CE70005B1C1D705970002401259A7003226946BD +:10CE80000A820094019402940394C2890A808D70EE +:10CE90008C8004A90291039300886946A6DF05B03F +:10CEA00030BD0E20FBE70820F9E7F0B589B0044655 +:10CEB0000227684607700D468783608A08AB07AA79 +:10CEC0000021A5DF0026002804D0616A00291AD0BD +:10CED000884718E06846008CC007C00F13D068462A +:10CEE000868020886946A8DF002812D1A97E2846BE +:10CEF00001221B300B0002F0FEFB093F0E1E202218 +:10CF000024263D283F00FF20FE3069468880208887 +:10CF1000A8DF09B0F0BD0496298B022902D2684629 +:10CF2000067502E069460A750690226A04A9204641 +:10CF300090470020EDE70492F7E70497F5E7032018 +:10CF400014E0042012E0052010E0298B032905D20B +:10CF5000032208212046FFF77DFFDAE741780278B7 +:10CF6000080210436946888202D006200490DCE75C +:10CF70000720FBE70920F9E70322EBE730B585B08E +:10CF80000D46040032D0002D30D0286800282DD066 +:10CF90000020C043AE4B20800FCB049301AB07C3EE +:10CFA000AC4869460880891C01A863DF00281CD1B1 +:10CFB000A21C69460120A0DF002816D168468078AF +:10CFC0002071204600F0C0F800280ED1204600F065 +:10CFD000F9F8002809D1286820626868002800D084 +:10CFE00060629A4901200870002058E70E2056E739 +:10CFF0003EB5002820D000291ED0026A002A1BD08E +:10D000000A88102A19D0112A28D0502A17D0512A5C +:10D0100012D10446891D087802280DD14888E2897A +:10D02000904209D1891C2046FFF73FFF002803D01A +:10D03000616A002900D088473EBD898810E0CA880F +:10D04000C3889A42F8D1082200928A7F6B461A71EF +:10D0500020310291026A694690473EBD0021C943D2 +:10D0600001803EBDF0B585B00A4605002DD0288868 +:10D07000754988422BD075480078002827D0734C1A +:10D080001020641C2070072060700127A770032106 +:10D09000684601820026E11C104600F04CF801466B +:10D0A0006846008A09186846018200960196029631 +:10D0B0000396E98901808770868004A80394029012 +:10D0C00028886946A6DF05B0F0BD0E20FBE70820E2 +:10D0D000F9E7F0B585B00A46050028D028885A49F6 +:10D0E000884226D059480078002822D0574C112079 +:10D0F000641C20700127684607820026611C1046C8 +:10D1000000F019F801466846008A0918684601824D +:10D110000096019602960396E989018087708680C1 +:10D1200004A80394029028886946A6DFCBE70E2066 +:10D13000C9E70820C7E70870020A4A70020C8A7023 +:10D14000000EC8700420704730B58FB005461C2112 +:10D15000684602F0DCF9694608780421084369460C +:10D16000087000240194039404940594069428798B +:10D1700008A9887037486946801C0884601C00072D +:10D180000794000F0C77103048778A7FF92002400F +:10D19000921CE7200240012002438A77142109A84B +:10D1A00002F0B5F908A8099007A80A9069468C858D +:10D1B0001420CC8508860D946888AB1D09AAA2DFCF +:10D1C0000FB030BD30B58FB005461C21684602F067 +:10D1D0009EF96946087808210843102210436946E1 +:10D1E000087000240194039404940594069428790B +:10D1F00008A9887017486946401C0884601C00070D +:10D200000794000F0C7710304877887FF921084089 +:10D21000801CF721084010430121084369468877A4 +:10D22000142109A802F073F908A8099007A80A9028 +:10D2300069468C851720CC8508860D942B46688816 +:10D240000E3309AAA2DFBBE7FFFF00004020002049 +:10D250005CF703003015000031B5054C04E0401EBA +:10D2600000902046FEF7ACFF00980028F7D138BDAB +:10D27000E703000008280CD004DC002807D00628AB +:10D280000FD108E00B280AD00C280AD105E00120B4 +:10D29000704702207047032070470420704704291C +:10D2A00001D0062070470520704710B50B460228B4 +:10D2B00019D0032816D100290BD0F648F6498088EA +:10D2C00088420FD0132176DF00280BD0F3A2A421CF +:10D2D00006E0104601F0B0FC002803D0EFA2AA211E +:10D2E000FEF7AAFF10BD01211846FFF7C3FF024653 +:10D2F0000121FA48FFF7AEFD0028F3D0E7A2B521DF +:10D30000EEE710B50A46044603211046FFF7B2FFC8 +:10D31000024603212046FFF79DFD002803D0DFA22F +:10D32000CF21FEF789FF10BD30B5054687B000203C +:10D330000090019002900390D6486A46C078107021 +:10D34000E74A10689268049068460692059008794A +:10D350000C2825D0042809D0032201212846FFF7F4 +:10D3600079FD00281AD0CDA2ED2115E0886800F0E3 +:10D3700006FA039004A8FFF7B0F900280ED00121A7 +:10D38000FFF778FF024601212846FFF763FD0028DA +:10D3900004D0FF21C1A20E31FEF74EFF07B030BD11 +:10D3A0008C68204600F0EBF90190201D00F0E7F9B1 +:10D3B000029020460830DAE7F0B5054608790E46B7 +:10D3C00085B081070AD0032211462846FFF742FDA7 +:10D3D00000281FD0FF21B1A2543143E0AD49009095 +:10D3E000143101F002FC010011D1AA4CB168009A7D +:10D3F000606902F02DF8009801F052FC010006D19E +:10D4000020466946143001F057FC010004D028463C +:10D41000FFF777FF05B0F0BD03200190009880086A +:10D4200002906069039001A8FFF7A4F907000BD0F0 +:10D43000092F1AD0606901F0FFFB010002D02846D5 +:10D44000FFF75FFF3946E2E7307921690122401892 +:10D45000206103212846FFF7FDFC0028DAD0FF21D8 +:10D460008EA28431FEF7E8FED4E7307921694118B5 +:10D47000216160780028CDD02089401E0004000C76 +:10D480002081C7D12846FFF724FE002804D0FF21C1 +:10D4900082A29531FEF7D0FEE0882081BAE710B570 +:10D4A000FF217EA2D031FEF7C7FE10BD10B5794C2A +:10D4B0007949A088884208D0132176DF002815D04A +:10D4C00076A28849FEF7B8FE10E0A07800280DD0BB +:10D4D00074DF002804D0834970A2FD39FEF7ACFE4A +:10D4E000FF2081490130C8600020A07001F0CFF812 +:10D4F000002804D06D2169A2C900FEF79DFE00201E +:10D5000010BD70B50D6804460120624A2B0002F080 +:10D51000F2F80A2F393B0615234F543E5822FFF7E5 +:10D5200084F90421FFF7A6FE024604212046FFF7F6 +:10D5300091FC00280FD059A26C494BE0FFF7B6FFD1 +:10D54000002804D0694955A2491DFEF775FEFFF772 +:10D55000C5F9002809D170BDFFF7A8FF002804D045 +:10D5600062494EA21231FEF767FEFFF7CCF970BD9B +:10D57000D0600879002803D088680078D07070BD2A +:10D580000420FBE7022000E00320D06070BDD268D9 +:10D590002046012A06D0022A07D0032AF6D1FFF737 +:10D5A0000BFF70BDFFF7C0FE70BD00F0F2F870BD5C +:10D5B00050708888D080108170BD00205070D0805D +:10D5C00070BD20461169FFF74DFD0028F8D047498E +:10D5D00032A23C31FEF730FE70BD10B52D4CA07864 +:10D5E00000280ED13D48143873DF002804D02521CF +:10D5F0002AA20901FEF720FE01203B4A01029160A8 +:10D60000A07010BD70B5234C0588A388132D2CD0B5 +:10D610000ADC374A3449102D18D0112D15D1CA60B3 +:10D62000207800281BD01CE0522D29D0552D0CD17C +:10D630008079002809D11321184676DF002804D00C +:10D640002A4916A29831FEF7F7FD70BD8A60FF22C5 +:10D650000132CA608088A0800020A07070BDFFF7F2 +:10D66000BCFF0020C043A08070BD0A4A1846183293 +:10D6700000217FDF0028F7D01C4908A29031E2E7A3 +:10D68000002211461846A9DF0028EDD0174903A251 +:10D690009E31D8E748200020FFFF00002F686F6D03 +:10D6A000652F7267726F7665722F706C61792F6467 +:10D6B000656D6F2D617070732F424C455F426F6FC7 +:10D6C000744C6F616465722F6466755F7472616E0D +:10D6D00073706F72745F626C652E63008425002026 +:10D6E0006CF703005F03000000050050010200001A +:10D6F0000002000010B5044600F0FAFF21468448FD +:10D70000FFF776FC2046FFF77DFF10BD10B5814A7C +:10D710008149FEF791FD10BD1CB580490020C8600D +:10D720007F4903200860091D08607D491C3108609D +:10D730007C4801F08DF8002820D17B48FEF7CAFF15 +:10D7400001F044FA002819D100F074F877480090ED +:10D750007748019069466E48FFF710FC002804D016 +:10D76000C9216C4A8900FEF767FD00F088F800F0D7 +:10D7700040F800F0BAF8FFF730FF00201CBD10B5EC +:10D78000044601F0C6FE0002E178000A09060843DB +:10D7900010BDFEB50446012000908868029008790B +:10D7A000002283070ED08007800F0422121A002067 +:10D7B000034605E00E79029D3618B600AB51401CB9 +:10D7C0009042F7D308798018800801906846FFF7E7 +:10D7D00007F80221FFF74EFD024602212046FFF71F +:10D7E00039FB002804D0FF214A4A4031FEF724FDCE +:10D7F000FEBD00B587B01C21684601F088FE4D498A +:10D8000001910121890300200291009003226946C1 +:10D810000A73C8810874059047480690684600F06E +:10D8200012FF002804D0FF213A4AE731FEF704FD39 +:10D8300007B000BD0EB511206946087207223FA14E +:10D8400002A87CDF002804D03349324A3E39FEF773 +:10D85000F3FC002000900C22694601900A801822F7 +:10D860004A808880FF209130C88068467ADF00288F +:10D8700004D02949274A3439FEF7DEFC0EBD10B525 +:10D8800092B006216846017121480179684681708D +:10D890002C4901803C2102A801F039FE02200290AF +:10D8A0000024684644730121018201A8059068465E +:10D8B00081830890214602A800F07CFD002804D056 +:10D8C0001549144A1639FEF7B7FC114814211438CB +:10D8D00001F01DFE0E48FF211438047044600472EC +:10D8E00091310182448212B010BD0C491E201831C2 +:10D8F0000880887801221043E12210400C30DF229A +:10D90000104088700720C870102008717047000010 +:10D91000842500209CD6030011030000482000202D +:10D9200020070050F5D60300ABD2030003D5030057 +:10D930000DD70300CD0C00009FD40300446675543E +:10D9400061726700301500000A48026803210A432B +:10D9500002600948804709480047FEE7FEE7FEE706 +:10D96000FEE7FEE7FEE7000005480649064A074BCA +:10D97000704700002405004091D90300C1C0030096 +:10D980007028002070340020702C0020702C0020A3 +:10D9900010B500F026F8234A002804D02248506031 +:10D9A0002249D01388612249088CC3B20120012B7F +:10D9B0000DD18B8C1B070AD10B8D1B061B0F042B63 +:10D9C00005D1898D0906090F01D11A498860906136 +:10D9D000194900224A608A05906048680028FCD0F6 +:10D9E00010BD1348018CC9B2012917D1818C0907D8 +:10D9F00014D1018D09060A0F03D1828D1206120F70 +:10DA00000ED0090F012903D1828D1206120F07D003 +:10DA1000032903D1808D0006000F01D0002070473C +:10DA20000120704700050040DFFF07C0006C004088 +:10DA3000C00F00F000060040000100408307FF22F5 +:10DA4000DB0E9A408907090E994000280BDA00077F +:10DA5000000F08388308FC489B001B18D8699043C6 +:10DA60000843D86170478308F8489B001B18186862 +:10DA7000904308431860704770B5F54C2079002832 +:10DA800013D10120F34900044860F249801C403959 +:10DA900048600125F04900040860F0490860F0483A +:10DAA00005602F20FEF79CFB257170BD70B5E84C1A +:10DAB0002079002817D00125E849680480310860E2 +:10DAC000E44940108860E349801C40398860E44E96 +:10DAD00075602F20FEF784FBB56000252F2065615F +:10DAE000FEF77EFB257170BDF0B5D94F2821BC68CB +:10DAF00041430D1939694A1C09D028224A43161995 +:10DB0000AB68B268934204D8D21AB26069623861D5 +:10DB1000F0BD0A4602E00A46796A9B1B4E1C0BD0F8 +:10DB200028264E433719BE689E42F4D328264E431A +:10DB30003619B768FF1AB760AB60696228214A439B +:10DB400011194862F0BD70B5C14C2269A568134631 +:10DB5000114606E0814207D00A462826714349193A +:10DB6000496A4E1CF6D170BD002EFCD08A420CD101 +:10DB7000282043435819406A2061401C05D1B84B06 +:10DB80000120986000236361607128204143481997 +:10DB9000282381685A43406A52195062421CE2D0DD +:10DBA00028225043401982685118816070BDF8B531 +:10DBB0000446A74800270169009146785CE0A44824 +:10DBC000F100C2688D1851E0601C07D0A04A2820DF +:10DBD0009268604321468018446A24E0287818211E +:10DBE00041436A68401CC0B252182870A978884224 +:10DBF00000D12F70964B516828209B684843C0186D +:10DC00001368012B34D1037E002B31D19368C3609C +:10DC1000D368036113694361526902628C4A527985 +:10DC2000002A00D0C7608A4BC2685B6996469C4652 +:10DC3000D31A1A028B4B120A9A4202D20369D218E3 +:10DC400008E0724663469A1A12020369120A934266 +:10DC500002D99A1A826000E08760C76001220761DA +:10DC60000276921E42620846FFF73EFF601CABD16F +:10DC7000287869788842A7D13046761EF6B2002807 +:10DC80009DD1734801690098814201D00120F8BDFF +:10DC90000020F8BD70B574490020086048608860B5 +:10DCA000C8607149403908604A68002A09D0684A4A +:10DCB000946AD36A01263606A41900256B41946242 +:10DCC000D362486000F042F970BDFEB50020C04349 +:10DCD0005F4D02906869019068462E6900F064F912 +:10DCE000074600F07EF90446002F08D002AA0199E9 +:10DCF000009800F0BEF90298FFF759FF06E002987D +:10DD0000FFF755FF002801D1002C02D0304600F06B +:10DD1000D9F900206871FEBDFFB59807002481B0D5 +:10DD20001E4615460F4600280BD1002E09D0FFF7DE +:10DD3000BDFE47490A9888610F70324600208E6008 +:10DD400008E0072005B0F0BD28234343D4509B18BA +:10DD50001C76401CB842F7DB28204743BB19032040 +:10DD600048700F461846CB60194618300022182319 +:10DD70002E465E43D3005B181C705C709D7058602B +:10DD80003018521C032AF5DB0020C0433861BC70F8 +:10DD9000FC70012430482405046003211420FFF79F +:10DDA0004DFE2E480460314C0198A06003211120E3 +:10DDB000FFF744FEFFF760FE606878610020C1E76E +:10DDC00070B5234CA568002D06D0002A06D0002887 +:10DDD00004D00023247809E0082070BD072070BD1E +:10DDE00028265E43AE59002E04D05B1CA342F7DB0D +:10DDF000042070BD282401265C432E516419E26181 +:10DE000061600360002070BD0F494868C005C00D07 +:10DE100017D0103807D50207120F083A920892005F +:10DE20005118C96904E08108084A890089180968FD +:10DE30008007C00EC1400806800F012818D00328B3 +:10DE400018D002207047000000ED00E000E400E080 +:10DE5000702000204013014080E200E000E100E07B +:10DE600000100140FFFF7F004011014000150140FC +:10DE70000020E7E70120E5E7FEB50446BD48174668 +:10DE800082680D46002A0CD001788C4201D2052D03 +:10DE900001D20720FEBD2146282359435358012BA8 +:10DEA00001D00820FEBD8818406801281DD000263A +:10DEB000FFF7AAFFC000AF490190C9684018694642 +:10DEC00000F032F9002812D0012144600160AA4913 +:10DED00049680830E2C0A7490198C968411800980C +:10DEE000487000F02EF80020FEBD2E46E0E704202A +:10DEF000FEBDF8B59F4D0446A868002809D02978D2 +:10DF00008C4201D30720F8BD2821614340580128E5 +:10DF100001D00820F8BDFFF777FFC600E868694622 +:10DF2000301800F001F9002809D0022112C0E86879 +:10DF300031180098487000F004F80020F8BD042063 +:10DF4000F8BD01208D49000508607BE7F8B5894CD4 +:10DF50002569681C27D08848002740686169401AF5 +:10DF60000602360A0BE028204543A068281881687D +:10DF7000B14206D8761ACF19456A00F0E7F8681C56 +:10DF8000F1D1A178E078814206D1401CC0B2E070A6 +:10DF9000022801D10020E07076490006800D1C3176 +:10DFA0000F50FFF7CEFFF8BD10B5724900238A78F5 +:10DFB000CC78A24212D0521CD2B28A70022A00D16E +:10DFC0008B708A786B4B92001C339A5802604869B8 +:10DFD00010180002000A4861012010BD03600020F3 +:10DFE00010BDF8B5634801690091457833E0614898 +:10DFF000E900C0680E1834782AE018206043716880 +:10E00000641C0818B178E4B2A14200D10024016870 +:10E01000022902D003291BD113E0564A4068282167 +:10E02000926841438F18397E002911D0FFF78BFD8C +:10E03000002038760CE028277843C0180276406A22 +:10E0400003E04C4900228B680869471CF3D1086142 +:10E050007078A042D1D128466D1EEDB20028C6D1FD +:10E06000444801690098814201D00120F8BD002098 +:10E07000F8BDF7B53F4C0025A76823691EE02821AD +:10E080005943C9198E68864202D9301A886017E050 +:10E09000801B751900268E600E764E699C464B6A71 +:10E0A000B646002E0AD0019E76193602360ACE6098 +:10E0B00076460E6116684E6261461160591CDED1CB +:10E0C0002361FEBDF8B52B4801694A1C29D02822DE +:10E0D0005143826889188E6827494C6847690079DE +:10E0E000E11B0D022D0AED1C002801D1FFF7C4FC35 +:10E0F000B54200D23546E81900021F49000A4031F6 +:10E1000008601D494968001B091B0902090A000231 +:10E11000C91C000A814203D9012018494004086043 +:10E12000F8BDFFF7C3FCF8BD42788378521C9342D8 +:10E1300000D100220378934201D1002082E60A60D8 +:10E14000416840781822504308187BE610B5094909 +:10E15000C2698B69006A002B0AD0014610469847B5 +:10E16000002804D0FF21064A6E31FEF765F810BD85 +:10E17000904710BD702000200015014000E200E033 +:10E1800078F70300FFB583B0074600200C9C864655 +:10E19000267805463AE07868A90041180A8868465A +:10E1A00082804988C1800022694601A865DF002875 +:10E1B00010D1684601780598814226D17046002822 +:10E1C00001D0002200E002222078891841181F297E +:10E1D00002D90C2007B0F0BD7146002908D1401CBF +:10E1E000C0B2411C069B049A21701A540120864635 +:10E1F000217806980A18694601A865DF0028E9D148 +:10E20000694620780978401820706D1C3888A8422B +:10E21000C1DC7046002804D020780699801B401E7F +:10E2200088550020D6E7F8B51546069C1E460746D9 +:10E2300002220094FFF7A6FF002806D133461022E1 +:10E24000294638460094FFF79DFFF8BDF7B582B028 +:10E2500000260546167000681446002805D028469A +:10E26000039900F0DFF806002DD1687900281BD053 +:10E270002078039F001D1F2824D8684679DF0028D6 +:10E2800021D121780322481C20707A542178192248 +:10E29000481C20707A542078C1196846008800F024 +:10E2A000BCF82178401820702989002923D001204A +:10E2B0008446EA680398002A07D0227853189B1CEA +:10E2C0001F2B04D90C2005B0F0BD0720FBE7134637 +:10E2D000521C491C2270C15422786746511C21707F +:10E2E000875423782A891818E96801F0B1F8207852 +:10E2F000297A401820702869002815D0002141563D +:10E3000022788C46D01C03991F28DBD8501C02238E +:10E3100020708B5422780A23501C20708B54207854 +:10E320006246431C23700A54A88A002809D0284654 +:10E330000094062202211430039BFFF774FF0600AD +:10E34000C1D1A88B002809D02846009407220321B8 +:10E350001C30039BFFF767FF0600B4D1A88C002890 +:10E3600009D028460094152214212430039BFFF77E +:10E370005AFF0600A7D1E86A002805D02246039973 +:10E3800000F085F806009ED1286B002805D02246B3 +:10E39000039900F0BBF8060095D13820405D0028B5 +:10E3A00006D022462846039900F0E2F806008AD1FA +:10E3B000304688E770B50D4692B000216A4611706C +:10E3C00007241171002812D00189002905D0C168E5 +:10E3D000002902D00978490702D4204612B070BD46 +:10E3E00002A9FFF733FF0028F8D102AE00E00026B3 +:10E3F000002D0BD028890028EFD101AA0AA92846B0 +:10E40000FFF724FF0028E9D10AAA00E000226846AD +:10E4100003790178304672DFE0E70870000A48703F +:10E4200002207047F8B514780746A01C15460E4622 +:10E430001F2803D83879801C1F2801D90C20F8BD6B +:10E440001D20001B80B26946864608803019801C5A +:10E450007DDF0028F3D13868022805D1684600889E +:10E46000704501D8092107E038790821002801D03A +:10E47000704501D968460088421C3255641CE2B2DE +:10E48000B1542978801C081828700020F8BDF8B510 +:10E490000D4611780646881D14461F2801D90C2008 +:10E4A000F8BD33880720062BFAD31927FF01BB429A +:10E4B00002D94E4A9342F3D17288062AF0D3BA4267 +:10E4C00002D94A4FBA42EBD1484FBB4203D0BA42BD +:10E4D00001D09342E4D8481C052220706A54207869 +:10E4E0001222411C21702A54207841193088FFF7EC +:10E4F00094FF21784018C0B2207041197088FFF74E +:10E500008CFF2178401820700020F8BD70B50546BA +:10E5100000790E46801C1446C0B21178821C8A18FD +:10E520001F2A01D90C2070BD0A46491C401C2170CD +:10E53000B0542078FF22411C217032542078811978 +:10E540002888FFF76AFF21784018C0B22070AA8897 +:10E55000002A09D0A968002908D0801900F078FFA6 +:10E560002078297940182070002070BD072070BDE8 +:10E57000F7B582B002981446406B0F46002832D09F +:10E58000029800252030009028E00298416B0C2072 +:10E5900068430E18217830794A1CC01C22707854C8 +:10E5A00021781622481C20707A542078C1193088AE +:10E5B000FFF733FF21784018C0B22070B288002ADC +:10E5C00009D0B16800290ED0C01900F041FF2078B1 +:10E5D0003179401820706D1C0098EDB2007EA84281 +:10E5E000D3D800206FE607206DE60000FFFF000093 +:10E5F00038B56749674A488890420FD04A78664CD8 +:10E60000521CD2B24A70237B934208D3083175DF83 +:10E61000002803D0A169002900D0884738BD002513 +:10E620004D70217C002907D03B2176DF002803D0E4 +:10E63000A169002900D0884761690029EED06846A9 +:10E640000095884738BD70B5054601461C225248E2 +:10E65000FDF7D6FD4E4C002626702968002907D00C +:10E660000822A01800F0F4FE204608307ADF02E00D +:10E67000474808307BDF002808D1401E60804448AE +:10E680006670464A0021001DFFF79AFB70BD10B569 +:10E690003F484068FFF72DFC10BDF8B53C481030EE +:10E6A00000F069F800263A4D3B4C002806D061691D +:10E6B000002919D001200090684614E0287800282D +:10E6C00004D0616900290FD00096F5E7687800282A +:10E6D0000CD0A16800226868FFF7CEFB002803D0A9 +:10E6E000A169002900D088472E70F8BD6168F1E764 +:10E6F000F8B5294C02880027254DE689102A18D044 +:10E7000029464968112A21D0122A2DD0502A0FD12A +:10E71000801D0288B2420BD1028B022A08D1C27E30 +:10E72000837E10021843C007C00F13D0FFF7B5FF58 +:10E73000F8BD818869800146154808220E311030E5 +:10E7400000F086FE6F70002EF0D0F8BD0020C043B0 +:10E7500068806F700846FFF7CCFB0028F5D0A169F0 +:10E760000029F2D08847F8BD811D094808221030E1 +:10E7700000F06EFEDAE741880548083002889142D1 +:10E7800004D34088814201D801207047002070479F +:10E79000A0200020FFFF0000AC250020F1E50300D1 +:10E7A00010B508461146FDF749FD10BDF8B5394CC6 +:10E7B0002078002837D02069002807D00026E0689C +:10E7C000002805D00025002E04D013E00126F6E72E +:10E7D0000125F8E7684651DF052806D0002806D055 +:10E7E0002DA26921FDF728FD04E0012602E0216940 +:10E7F00000988847002D12D1608869460880A0687B +:10E8000061DF052806D0002806D023A28021FDF76D +:10E8100013FD04E0012502E0E168A0688847002EAE +:10E82000D8D0002DCFD0F8BD10B5002901D08C076D +:10E8300001D0072010BD174CA1606280254963609C +:10E8400010DF0028F6D101202070162026DF10BD31 +:10E85000002803D00F49C860002070470E20704781 +:10E86000002803D00B490861002070470E20704734 +:10E8700010B508484068002808D08047002804D018 +:10E88000FF2105A23431FDF7D7FC10BDFFF78EFF45 +:10E8900010BD0000B82000202F686F6D652F7267D3 +:10E8A000726F7665722F706C61792F6E52463531BA +:10E8B0003832322F6E6F726469632F736F667464BF +:10E8C00065766963655F68616E646C65722E6370FE +:10E8D00070000000A1E70300F0B500220123032629 +:10E8E00036041F4697400C463C420FD0C5682C4664 +:10E8F0003C420FD03446BD43C5603C4D97007D1966 +:10E900002F68B7432F602F6827432F60521C202A9F +:10E91000E7D3F0BD012464043D43EDE7F8B5344886 +:10E92000056934490020C863074632E014213A469D +:10E930004A434168806854180121B940014226D0F9 +:10E94000E068C64320686E40064031462046FFF727 +:10E95000C3FF2748006968400CD00543E068216880 +:10E96000C04368400840014600902046FFF7B4FFCE +:10E97000009806433046A168A84301402A466068D3 +:10E980003240104002460A4301D0226990477F1C62 +:10E99000FFB2194841788F42C8D3F8BD10B500299D +:10E9A00003D08A070024002A01D0072010BD124A94 +:10E9B0000B46516010701421547041431846946006 +:10E9C00000F0A5FD00200D49C04388600C4840219F +:10E9D00001600C4A1068FF231B0498430B04184382 +:10E9E000106009480160002010BD000000070050C1 +:10E9F0000005005040610040CC2000200063004032 +:10EA000080E200E004E400E000E100E030B5CB008B +:10EA100008339DB293070024002B01D0072030BD9E +:10EA2000564B9A605219DA605C701C70588099805D +:10EA3000002030BDF7B5514C82B060880F4681424E +:10EA40006CD80020694608704E494D4E4868C00594 +:10EA5000C00D16D0103807D50207120F083A9208D9 +:10EA600092005118C96904E08108474A8900891851 +:10EA700009688007C00EC1400806850F012D01D12D +:10EA80000AE0042568462EDF02280BD0002803D0B8 +:10EA90003EA25921FDF7D0FB6078A188884203D2BD +:10EAA000401C02E072B6F7E700202278C0B2904224 +:10EAB00007D066786078884201DA401C00E00020C8 +:10EAC0006070012D0BD062B6684600782FDF0228F7 +:10EAD00005D0002803D02DA26121FDF7ADFB284809 +:10EAE000864219D0A068F500049941510299002985 +:10EAF0000CD0002F0AD060883A464643E0683018B0 +:10EB000000F0A6FCA0682818878002E000212818E1 +:10EB10008180002005B0F0BD0420FBE70920F9E763 +:10EB20000EB504E068468188029A0098904702AAD0 +:10EB300001A9684600F003F80028F3D00EBD70B5B7 +:10EB40000E4B05245D781E78B54215D01D781C78D3 +:10EB50009E88B44201DA641C00E000241C705C88CA +:10EB6000DE686C43A41904609B68E800C418A4889C +:10EB70000C80185800241060204670BDD82000205A +:10EB8000FFFF000000ED00E000E400E02F686F6D83 +:10EB9000652F7267726F7665722F706C61792F6E58 +:10EBA000524635313832322F6E6F726469632F618D +:10EBB00070705F636F6D6D6F6E2F6170705F7363E8 +:10EBC000686564756C65722E630000004B48002117 +:10EBD00001704C484A4A02608160C16001610822AC +:10EBE0004161426081610846704710B500291DD01F +:10EBF00000220A60434A5368002B1BD0202817D8F4 +:10EC00005B1E5360D0682423401CD06010691468D8 +:10EC10004343E3180B60012383409169401C19436F +:10EC20004007400F91611061002010BD0E2010BD03 +:10EC30000C2010BD042010BDF0B5324A0646916884 +:10EC400000292BD057691020791A4907490F1468F9 +:10EC50000B4624254D436519B54206D1012495691B +:10EC60008C4065400020956104E0491C4907490F2C +:10EC70008F42EED1491C4E07760F956901210C4653 +:10EC80009C402B4623420AD19368002B07D05B1E81 +:10EC9000936053685B1C53603346F0E70420F0BD7B +:10ECA000184A2423117C1268491E4907490F594309 +:10ECB000203150500020704770B500281AD000292C +:10ECC00018D0104AD368002B16D05B1ED36093680F +:10ECD00024265B1C9360536915681C467343EE1829 +:10ECE00020330660E858641C08606007400F5061DC +:10ECF000002070BD0E2070BD042070BDE8200020F3 +:10ED0000C8250020E826002018225043FE4A002192 +:10ED10008018017181604161012281610261C160DD +:10ED20007047FFB581B0F94C049B039A05462669EC +:10ED30001A4303200092002E03D1002A0ED0012294 +:10ED400022612769039A0126360792003B0000F0F2 +:10ED5000D2FC072707162940526127000222EFE75D +:10ED60007069326992B25043326933691204920C6D +:10ED70009BB2594321DF002812D102210FE008463F +:10ED800020DF00280CD10399002901D0032106E0DF +:10ED90000499002916D12978042946D017E0216169 +:10EDA00005B0F0BD7069326992B25043326993B2D6 +:10EDB0004B4301461846039A21DF0028F0D10499FD +:10EDC000002901D00421EAE72978042920D005216F +:10EDD000E5E773693069366980B2434368681B1898 +:10EDE0009B18B6B24E43301880181946049A21DF9A +:10EDF0000028E9D0D4E7306980B2484369688018B8 +:10EE00008A08696921DF0028CAD1009900290CD03D +:10EE10000621C4E77069316989B24843316989B212 +:10EE200000F088FB20DF0028BAD10721B7E7F8B54A +:10EE3000B54918230A780F205A435418241DB349A2 +:10EE400022782669CF68022A1BD001252D07042AC3 +:10EE50002AD0052A5BD1286981B2304600F06AFBCE +:10EE60000146A36828699A1980B24843101A82089B +:10EE700060681818861928694B1C80B25843801B9B +:10EE800034E0B80262686169121A0918A368301880 +:10EE9000181801239B029A4202D2920821DF31E026 +:10EEA000FF22013221DF2DE0E26897491420504310 +:10EEB000F4314018001D0BC8B04203D160685943BB +:10EEC000814218D0022A16D0286981B2304600F05B +:10EED00031FB0146286980B24843301A820828690C +:10EEE0004B1C80B2584363689B19C01A83082046A4 +:10EEF000FFF717FF06E0286981B2304600F01AFBE1 +:10EF0000C01920DF002802D17F4901228A70F8BD94 +:10EF1000F8B57D4C069E65780A2D1DD027787D19A1 +:10EF2000EDB20A2D01D30A3DEDB218277D432D190C +:10EF30002871AA6103C9EE60AB6069612861A1789C +:10EF40000020002904D1FFF772FF112800D1002012 +:10EF50006178491C6170F8BD0420F8BD38B50246DF +:10EF60006948182301785943081803690179022B6D +:10EF70000AD014246343644CF434E4588368009347 +:10EF800083691030A04738BD604B14331C68F5E727 +:10EF9000F8B55D4B9978012914D100255B499D7026 +:10EFA0000A69082A05D002280FD003280AD10D20AB +:10EFB00006E0022807D00D7000F018FA002801D0F2 +:10EFC000FFF7CCFFF8BD0D61F6E74F481824037832 +:10EFD0004E496343CC681818641C001DCC6003784C +:10EFE000022B05D14668A102B14201D3012700E0FE +:10EFF0000027052B01D1072A03D00021042B02D0C2 +:10F0000003E00121FAE7072A03D00026042B02D0EF +:10F0100007E00126FAE74068A302834201D3002AF1 +:10F020001AD00020314301433943C5D0374E28461A +:10F030003561FFF793FF344C2078FFF765FEF560EC +:10F040006078401E60702078401CC0B220700A2892 +:10F05000B2D30A382070AFE70120E3E770B500258E +:10F060002A4C2948E56025610570457085702E465B +:10F070003046FFF749FE761C0A2EF9D3012212070B +:10F080006560516928461269491E92B25143E56094 +:10F09000A1601D49F4310D608D600D61CD601B498B +:10F0A00014310D60888001212170206170BDF8B598 +:10F0B000164A044610780E46002830D0002C30D076 +:10F0C000002E2ED0206800282BD001200007676872 +:10F0D000016989B28F4228D8102F26D3A168002950 +:10F0E00023D09568794343694A19006980B2434344 +:10F0F0009A421AD801200007006980B2814212D9D1 +:10F1000001200007006903E004270020F020002010 +:10F1100080B2394600F00EFA002906D103E008203B +:10F12000F8BD0E20F8BDB80701D00720F8BDB749DB +:10F13000486801281CD00F461421B54A21C6414316 +:10F140008E187560236853506168B160A168F160E2 +:10F15000A268616800235143012212075B1C1469F5 +:10F160009BB2A4B28C4205D21469A4B2091B02E07E +:10F170000420F8BD00211469A4B265191469A4B271 +:10F180008C42EBD9BD60401C336178600020F8BD33 +:10F19000F8B504469D481E46007815460F460028DF +:10F1A00007D0002F07D0002C05D02068002817D1E9 +:10F1B00003E00820F8BD0E20F8BD9548016800293D +:10F1C0000ED0C268816840684A4310186268904255 +:10F1D00006D9002D04D0A94202D3A819884201D92A +:10F1E0000720F8BD384600F0FBF8002807D030466D +:10F1F00000F0F6F8002802D02079800701D0102016 +:10F20000F8BD2B463A46214602200096FFF780FEC5 +:10F21000F8BDFFB57D4881B000781F4616460D4603 +:10F22000002808D0002D08D00198002805D02868B3 +:10F23000002817D103E00820B2E50E20B0E5744C99 +:10F24000206800280ED0E168A068626841438918F0 +:10F250006A68914206D9002E04D0B04202D3F11957 +:10F26000814201D907209BE5019800F0B9F80028F8 +:10F2700007D0384600F0B4F8002802D0686881074B +:10F2800001D010208CE5C1193246019800F0E0F859 +:10F290000096286814214843245800220321284658 +:10F2A000019BA04700207BE5F8B5044657480E4671 +:10F2B0000078002805D0002C05D0206800281BD13C +:10F2C00003E00820F8BD0E20F8BD5149002508686C +:10F2D000002811D08A68C86849685043431860689C +:10F2E000834209D9830701D01020F8BD401A114686 +:10F2F00000F020F9002901D00720F8BD3346002294 +:10F30000214604200095FFF703FEF8BD3F4A12781E +:10F31000002A0DD000280DD000290BD00268002A49 +:10F3200008D03A4A14321368002B05D004207047E5 +:10F33000082070470E20704702230B6000681060A1 +:10F3400000207047F8B5044630481E46007817463E +:10F350000D46002807D0002D07D0002C05D02068CE +:10F3600002281BD103E00820F8BD0E20F8BD274875 +:10F3700014300068002811D0084600F031F8002849 +:10F380000ED0304600F02CF8002809D03B462A4623 +:10F39000214602200096FFF7BBFDF8BD0720F8BD0F +:10F3A0001020F8BD08B5194A1278002A05D00028A7 +:10F3B00005D00268022A11D103E0082008BD0E2002 +:10F3C00008BD124A14321268002A07D00B460022E8 +:10F3D000014604200092FFF79BFD08BD072008BDF1 +:10F3E000800701D00020704701207047084910B500 +:10F3F000F43949780020002906D0FFF718FD0028CD +:10F4000002D0112800D1002010BD0000F020002003 +:10F41000F827002010B50446002A02D010880022E8 +:10F4200010E00A48FBE7030A00020343A05C5840CF +:10F4300003061B0F43401803584083B21806C00C44 +:10F440005840521C8A42EED310BD0000FFFF00005E +:10F45000F8B5042A2CD3830712D00B78491C03700B +:10F46000401C521E83070BD00B78491C0370401CB4 +:10F47000521E830704D00B78491C0370401C521E97 +:10F480008B079B0F05D0C91ADF002023DE1B08C99C +:10F490000AE0FCF7B5FEF8BD1D4608C9FD401C4654 +:10F4A000B4402C4310C0121F042AF5D2F308C91A25 +:10F4B000521EF0D40B78491C0370401C521EEAD433 +:10F4C0000B78491C0370401C521EE4D4097801706B +:10F4D000F8BD01E004C0091F0429FBD28B0701D548 +:10F4E0000280801CC90700D00270704700290BD031 +:10F4F000C30702D00270401C491E022904D38307AF +:10F5000002D50280801C891EE3E70022EEE700227C +:10F51000DFE70378C2781946437812061B021943C5 +:10F520008378C0781B04194311430902090A0006B5 +:10F5300008437047002203098B422CD3030A8B42F5 +:10F5400011D300239C464EE003460B433CD40022DB +:10F5500043088B4231D303098B421CD3030A8B42ED +:10F5600001D394463FE0C3098B4201D3CB01C01ABB +:10F57000524183098B4201D38B01C01A5241430986 +:10F580008B4201D34B01C01A524103098B4201D374 +:10F590000B01C01A5241C3088B4201D3CB00C01AE1 +:10F5A000524183088B4201D38B00C01A5241430859 +:10F5B0008B4201D34B00C01A5241411A00D201467E +:10F5C0005241104670475DE0CA0F00D04942031017 +:10F5D00000D34042534000229C4603098B422DD366 +:10F5E000030A8B4212D3FC22890112BA030A8B420E +:10F5F0000CD3890192118B4208D3890192118B425D +:10F6000004D389013AD0921100E08909C3098B42E1 +:10F6100001D3CB01C01A524183098B4201D38B0124 +:10F62000C01A524143098B4201D34B01C01A5241C7 +:10F6300003098B4201D30B01C01A5241C3088B420C +:10F6400001D3CB00C01A524183088B4201D38B00F7 +:10F65000C01A5241D9D243088B4201D34B00C01A81 +:10F660005241411A00D20146634652415B10104696 +:10F6700001D34042002B00D54942704763465B10DE +:10F6800000D3404201B50020C046C04602BD7047CD +:10F6900070477047754600F023F8AE46050069468E +:10F6A0005346C008C000854618B020B5FEF75CF987 +:10F6B00060BC00274908B6460026C0C5C0C5C0C505 +:10F6C000C0C5C0C5C0C5C0C5C0C5403D49008D4608 +:10F6D00070470446C046C0462046FCF73EFD000089 +:10F6E000004870470C28002001491820ABBEFEE7F7 +:10F6F00026000200704730B47446641E2578641CEE +:10F70000AB4200D21D46635D5B00E31830BC184776 +:10F7100002000000000000000000000000000000E7 +:10F7200004000000000000000000000000000000D5 +:10F7300000000000000000005DC4030000000000A5 +:10F7400000000000020000000000000000000000B7 +:10F7500000000000000000000000000023D1BCEA0F +:10F760005F782315DEEF1212000000000200000097 +:10F7700000000000000000002F686F6D652F7267A9 +:10F78000726F7665722F706C61792F6D6265642D72 +:10F790007372632F6C69627261726965732F6D6237 +:10F7A00065642F746172676574732F68616C2F5480 +:10F7B00041524745545F4E4F524449432F544152A2 +:10F7C0004745545F4D43555F4E52463531383232CE +:10F7D0002F4C69622F6170705F636F6D6D6F6E2F5C +:10F7E0006170705F74696D65722E63000CF80300C0 +:10F7F000002000200C01000004C1030018F90300E0 +:10F800000C2100206413000020C103000000000050 +:10F8100000000000000000000000000000000000E8 +:10F8200000000000000000000000000000000000D8 +:10F8300000000000000000000000000000000000C8 +:10F8400000000000000000000000000000000000B8 +:10F850000000000000000000FFFF000000000000AA +:10F860000000000000000000000000000000000098 +:10F87000000000000024F400000000000000000070 +:10F880000000000000000000000000000000000078 +:10F890000000000000000000000000000000000068 +:10F8A0000000000000000000000000000000000058 +:10F8B0000000000000000000000000000000000048 +:10F8C0000000000000000000000000000000000038 +:10F8D0000000000000000000000000000000000028 +:10F8E0000000000000000000000000000000000018 +:10F8F0000000000000000000000000000000000008 +:10F9000000000000000000000000000000000000F7 +:08F910000000000000000000EF +:20FC00000100000000000000FE0000000000000000000000000000000000000000000000E5 +:020000041000EA +:0410140000C0030015 +:040000050003C0C173 +:00000001FF
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_DELTA_DFCM_NNN40/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/s130_nrf51822_1_0_0/s130_nrf51_1.0.0_softdevice.hex Tue Jun 09 14:29:26 2015 +0100 @@ -0,0 +1,6861 @@ +:020000040000FA +:10000000C0070000D1060000D1000000B1060000CA +:1000100000000000000000000000000000000000E0 +:100020000000000000000000000000005107000078 +:100030000000000000000000DB000000E500000000 +:10004000EF000000F9000000030100000D010000B6 +:1000500017010000210100002B0100003501000004 +:100060003F01000049010000530100005D01000054 +:1000700067010000710100007B01000085010000A4 +:100080008F01000099010000A3010000AD010000F4 +:10009000B7010000C1010000CB010000D501000044 +:1000A000DF010000E9010000F3010000FD01000094 +:1000B00007020000110200001B02000025020000E0 +:1000C0001FB5C046C04600F0EFFA04B00FB41FBD24 +:1000D00008205A49096809580847382057490968CB +:1000E000095808473C2055490968095808474020E5 +:1000F0005249096809580847442050490968095875 +:10010000084748204D490968095808474C204B4981 +:10011000096809580847502048490968095808479C +:100120005420464909680958084758204349096836 +:10013000095808475C204149096809580847602068 +:100140003E4909680958084764203C49096809582C +:100150000847682039490968095808476C20374919 +:100160000968095808477020344909680958084740 +:100170007420324909680958084778202F490968CE +:10018000095808477C202D490968095808478020EC +:100190002A490968095808478420284909680958E4 +:1001A0000847882025490968095808478C202349B1 +:1001B00009680958084790202049096809580847E4 +:1001C00094201E4909680958084798201B49096866 +:1001D000095808479C201949096809580847A02070 +:1001E0001649096809580847A4201449096809589C +:1001F0000847A8201149096809580847AC200F4949 +:10020000096809580847B0200C4909680958084787 +:10021000B4200A49096809580847B82007490968FD +:1002200009580847BC2005490968095808470000D3 +:1002300003480449024A034B7047000000000020B5 +:10024000C0070000C00700000122D84B5A6000BF61 +:10025000D74A1268002AFBD0016000BFD44A126856 +:10026000002AFBD00022D14B5A6000BFD04A12684E +:10027000002AFBD07047F0B505460E46174600240D +:1002800006E0A200B158A2005019FFF7DDFF641C80 +:10029000BC42F6D30020F0BD0120C043C549086030 +:1002A000401048607047014601229204086890425D +:1002B00001D9102070470020FCE7F0B505460C4638 +:1002C0001646002706E028462168FFF7BDFF2D1DD2 +:1002D000241D7F1CB742F6D3F0BD70B505460C4611 +:1002E0002E460BE0304600F075F9FF2C01D80024B3 +:1002F00001E0FF3C013C012080023618002CF1D1C6 +:1003000070BD0146012212044868904201D90920BB +:100310007047A9484069401C01D10F20F8E7002030 +:10032000F6E7FEB504462068030000F037FA05043E +:100330002B4249598B00201DFFF7E3FF0546002D96 +:1003400001D02846FEBDFFF7A7FF0120C00200F044 +:1003500041F9042221469948FFF78DFF002801D07A +:100360000320EFE708222146944800F06DF90028A9 +:1003700006D1002192480068FFF766FF00F00CF9F3 +:100380000320DFE7A768E6686068019031463846D9 +:10039000FFF7A3FF324638460199FFF78EFFB20000 +:1003A0003846019900F050F9002800D1CAE703202F +:1003B000C8E700F0E3F9834800688349086041E03A +:1003C00060680190E668A0680090B200009901980A +:1003D00000F03AF90746002F00D1B3E70E20B1E74D +:1003E000201DFFF760FF0546002D01D02846A9E734 +:1003F0006068002807D1FFF74FFF0320800200F05C +:10040000E9F800F0C9F8FFF747FF0120C00200F04B +:10041000E1F8042221466948FFF72DFF002801D0AA +:1004200003208FE708222146644800F00DF90028D8 +:1004300006D1002162480068FFF706FF00F0ACF823 +:1004400003207FE700BF00207CE770B505460C461F +:10045000182D04D12068FFF764FF206002E001201E +:10046000206000BF00BF70BDF0B589B05248406940 +:1004700003905248806881000398081802900398FE +:10048000000B01900121090302984018401E000B47 +:1004900000900124002520462946019A00F0C4F866 +:1004A0000022401E91410791069001260027304608 +:1004B0003946009A00F0B8F80022401E914105919B +:1004C0000490049BDB43059AD2430698184307998E +:1004D00011430791069037490698086007984860CD +:1004E00009B0F0BD70B53448446934488568466841 +:1004F000AA003146204600F0A7F8002801D00020CD +:1005000070BD0120FCE72D484068002801D0012083 +:1005100000E000200546FFF7E5FF002807D0FFF7C1 +:10052000BBFE0320800200F055F800F035F8FFF71D +:100530009BFF002D0ED020484669204884684768FC +:1005400021463046FFF7C9FE224639463046FFF7BE +:10055000B4FE00BF00F020F810B5184844681A48EF +:100560000460204600F0DCF810BD15480068006803 +:10057000401C01D100BFFEE710480068002802D0EF +:10058000042806D101E0FFF7BEFFFFF7E5FF00BF3B +:10059000FEE700BF00BFFEE7BFF34F8F0B480C49DB +:1005A000C860BFF34F8F00BFFEE7000000E50140C9 +:1005B00000E40140000600400010001000080000A8 +:1005C000B8070000BC070000000000200400FA0586 +:1005D00000ED00E010B50146104B1A6808460223F2 +:1005E0000F4C636000BF0F4B1B68002BFBD0531CEC +:1005F00004D0904202D20A4B186101E0084B986087 +:1006000000BF084B1B68002BFBD00023044C636029 +:1006100000BF044B1B68002BFBD010BD0010001066 +:1006200000E5014000E4014010B5202A04DB01464A +:10063000203A9140002010BD914020239C1A03468F +:10064000E3401943904010BD034610B50B439B0790 +:100650000FD1042A0DD308C810C9121FA342F8D025 +:1006600018BA21BA884201D9012010BD0020C04328 +:1006700010BD002A03D0D30703D0521C07E000208E +:1006800010BD03780C78401C491C1B1B07D1037854 +:100690000C78401C491C1B1B01D1921EF1D118463D +:1006A00010BD70477047704710B500F007F810BDD7 +:1006B000014B1B68DB6818470000002019481A49E5 +:1006C0007047FFF7FBFFFFF7FBFC00BD20BFFDE716 +:1006D0001649174C24688C420BD1164B1B68994263 +:1006E0000CD1154B154A1360186810498842EDD09B +:1006F0000AE0134880F30888124B18470F4A13602A +:1007000018680A498842E1D080F308880E49884277 +:1007100004DD0E48026802210A4302605B68184744 +:100720000346DFE7C0070000C0070000FFFFFFFF30 +:10073000000C000014100010001000000000002049 +:10074000000400206B05000000200020240500406C +:100750000D48704502D1EFF3098101E0EFF3088104 +:10076000886902380078182802D1C046074A104725 +:10077000074A12682C3212681047000000B5054B7A +:10078000054A9B58984700BDFDFFFFFF4B04000042 +:1007900000000020001000000400000030B4744687 +:1007A000641E2578641CAB4204D3635D5B00E318D0 +:1007B00030BC18471D46F8E7000C00000010000090 +:10100000F0210020FDB101005D22000063B101006C +:1010100000000000000000000000000000000000D0 +:101020000000000000000000000000006DB20100A0 +:1010300000000000000000005D2200005D220000B2 +:10104000D9B20100DFB201005D2200005D22000084 +:101050005D2200005D2200005D2200005D22000094 +:10106000E5B201005D2200005D220000EBB201004C +:101070005D220000F1B20100F7B20100FDB20100F3 +:101080005D2200005D2200005D2200005D22000064 +:101090005D2200005D2200005D2200005D22000054 +:1010A00003B3010009B301005D2200005D220000CE +:1010B0005D2200005D2200005D2200005D22000034 +:1010C00000F002F81AF07BF80CA030C80838241899 +:1010D0002D18A246671EAB4654465D46AC4201D170 +:1010E0001AF06DF87E460F3E0FCCB646012633420D +:1010F00000D0FB1AA246AB46334318477CA301003D +:10110000ACA30100103A02D378C878C1FAD85207CC +:1011100001D330C830C101D504680C6070470000AD +:101120000023002400250026103A01D378C1FBD803 +:10113000520700D330C100D50B6070471FB5C046C1 +:10114000C04619F0DEFF04B00FB41FBDF0B4404636 +:10115000494652465B460FB402A0013001B506482D +:10116000004700BF01BC86460FBC804689469246B8 +:101170009B46F0BC70470000C11000008269024924 +:101180008161024810447047911100000100000085 +:1011900001B41EB400B501F000FF01B40198864609 +:1011A00001BC01B01EBD0000401E00BF00BF00BF5B +:1011B00000BF00BF00BF00BF00BF00BF00BF00BF37 +:1011C00000BFF1D17047000070B505460C461646C9 +:1011D00002E00FCC0FC5103E102EFAD2082E02D31B +:1011E00003CC03C5083E042E07D301CC01C5361F2E +:1011F00003E021782970641C6D1C761EF9D270BD45 +:101200008307FF22DB0E9A408907090E99400028C8 +:101210000BDA0007000F0838830828489B001818CD +:10122000C36993430B43C3617047830824489B0001 +:101230001B181868904308431860704710B504469F +:1012400000210120FFF7DCFF00211820FFF7D8FF65 +:1012500000210B20FFF7D4FF02211920FFF7D0FF58 +:1012600002210D20FFF7CCFF02210E20FFF7C8FF5F +:1012700002210F20FFF7C4FF0221C81FFFF7C0FFA4 +:1012800003211620FFF7BCFF03211520FFF7B8FF4D +:10129000204600F019F8002010BD6721018070473A +:1012A00010B500F020F810BD0648704710B500F0EA +:1012B00022F810BD704770477047000000ED00E055 +:1012C00000E400E003F9004370B505462D4C08200A +:1012D0002070A01CFFF7E1FF5920A080294620467E +:1012E00000F0B3FB70BD10B500F0B8FB254900203D +:1012F000891E087010BDF8B5224E0446B61E30781F +:1013000001270D46002807D0204660380B2808D852 +:10131000204600F059FF2BE0602CF9D01A480860F5 +:10132000F8BD20466C38032803D8204600F08DFF16 +:101330001EE0204670381F2803D8204600F047F9E9 +:1013400016E0204690380F2803D8204600F0EAF82F +:101350000EE02046A0380F2803D8204600F076F88B +:1013600006E02046B0380F2804D8204600F0E2F905 +:10137000286000E02F60602CD2D128680028CFD1EF +:101380003770F8BD1A000020013000000120254907 +:10139000C003086024490020087007202349C005C5 +:1013A0008860704770B5204D04462878A04207D069 +:1013B000002C05D0002803D01DA14D2019F0CBFE34 +:1013C0002878A0420ED000211E4A18482C70002C0C +:1013D0001BD01D4B012C06D0022C0DD014A168206F +:1013E00019F0B9FE70BD1160022111605361032133 +:1013F00009068160416070BD116003211160536175 +:101400000121C9058160416070BD11601160072133 +:10141000C905816070BD10B505A1712019F09BFE52 +:1014200010BD000080E100E02000002000F5014038 +:101430007372635C68616C5F63636D5F6161722E80 +:101440006300000000F500408401002010B5A038C2 +:10145000030019F0A1FF0B070E172028313A414B6A +:10146000525C65004B6808788A68194603F0D9F920 +:1014700010BD88888A6883B20888194680B203F054 +:10148000DFF910BD08884C68CB688A6880B22146B5 +:1014900003F0DAF910BD08884B688A6880B21946F3 +:1014A00003F0EEF910BD88888A6883B2088819466F +:1014B00080B203F0FAF910BD88888A6883B2088880 +:1014C000194680B203F034FA10BD08884A6880B229 +:1014D000114603F073FA10BD088982B2888883B27E +:1014E0000888194680B203F074FA10BD08884A686B +:1014F00080B2114603F091FA10BD08894C6882B29F +:101500000888CB6880B2214603F00AFB10BD08882A +:101510004C68CB688A6880B2214603F01BFC10BD82 +:10152000012010BD10B59038030019F035FF0906F1 +:101530000F161D242C363F464E0088888A6883B2D9 +:101540000888194680B204F01DF910BD08884A6861 +:1015500080B2114604F051F910BD08884A6880B283 +:10156000114604F056F910BD08884A6880B2114649 +:1015700004F05CF910BD08884B688A6880B219468F +:1015800004F067F910BD088982B2888883B20888A0 +:10159000194680B204F066F910BD08894B6882B222 +:1015A0000888194680B204F07CF910BD08884A68A2 +:1015B00080B2114604F087F910BD888882B208888D +:1015C000114680B204F0DBF910BD012010BD10B54A +:1015D0007038030019F0E0FE1B0F15192125282F84 +:1015E000363B4044484C53585F68707881889095EA +:1015F000999CA2A5AC004A680878114607F019FC2E +:1016000010BD086807F066FC10BD0C790B7B8A687A +:101610000868214607F06FFC10BD086807F000FD60 +:1016200010BD07F08CF910BD08884A6880B21146D9 +:1016300007F034FE10BD0A790888114680B207F021 +:10164000C4FE10BD087840B207F0CDFE10BD08887A +:1016500080B207F0E1FE10BD086807F0EFFE10BD94 +:10166000086801F0ECFB10BD086801F016FC10BD25 +:10167000088982B209C9194607F0F8FE10BD05C9EC +:10168000114607F042FF10BD08884A6880B2114633 +:1016900009F0FAF910BD0C790888CB688A6880B225 +:1016A000214609F0CDFA10BD0B7908888A6880B20E +:1016B000194609F07DFC10BD08884B688A6880B225 +:1016C000194609F0EEFC10BD08884C68CB688A68A2 +:1016D00080B2214609F053FD10BD08884A6880B2E7 +:1016E000114609F08CFD10BD0B7908880A7A80B28A +:1016F000194607F02DFF10BD088880B207F02DFFB6 +:1017000010BD086807F030FF10BD07F0FCF810BDF1 +:101710008A6809C9194607F08CFF10BD07F0DCF88C +:1017200010BD08884A6880B2114608F05BF810BD09 +:10173000012010BD10B5B02805D0B12808D0B228BE +:101740000BD0012010BD088880B20AF056F910BDF8 +:10175000088880B20AF070F910BD08884B688A6862 +:1017600080B219460AF079F910BD000010B50300E7 +:1017700019F012FE0A0609060C0C0F0F06060612D7 +:1017800007F005F910BD09F027FF10BD01F042FA7E +:1017900010BD06F075FA10BDFAA1FE4819F0DBFC89 +:1017A00010BD7FB5FC49054603C901900291132085 +:1017B000800169468881F94A0F2310460A2128389A +:1017C0000AF043FE0024F6480AF05DFE641CE4B211 +:1017D0000A2CF8D304200090F04801231A4603A9EC +:1017E000F0300AF05DFA002804D0FF20E5A1533064 +:1017F00019F0B1FC686800F024FC00211E220846A4 +:1018000004F040F907F0C6FA02222421E54801F06D +:101810007FFBE44801222C214C3001F079FBE149A7 +:101820000B20B03901F000FA002804D0FF20D5A128 +:10183000673019F090FC09F09FFE02F075F901ABDA +:1018400000220821D8A007F085F9002804D0FF2045 +:10185000CCA16D3019F07FFC284602F0C2FC0028B4 +:1018600004D0FF20C7A16F3019F075FCDB2189007F +:10187000D04819F045FBCF48012141710221817107 +:101880000621C1717FBD10B5CA4CA078092804D3C8 +:10189000FF20BCA1A73019F05EFC207860214843EE +:1018A000001900210173417BF722C908C900C91C36 +:1018B0001140EF22114041730121E1700C3010BD45 +:1018C00070B50E4600211C4619801546030019F01C +:1018D00063FD0723050B1711231D2300224629460C +:1018E000304609F096FE70BD22462946304606F085 +:1018F00098FE70BD22462946304601F0C2FF70BDF9 +:1019000022462946304603F0C0FD70BD22462946D6 +:10191000304600F010FC70BD9E489AA1D53819F0F1 +:101920001AFC032070BD70B5A24CE078002818D0D6 +:101930002078602148430019407B00254007400F74 +:1019400001190879401E08712078401CC0B220702F +:10195000092800D12570A078401CA0700AF01DFF56 +:10196000E57070BD9348C079002800D08BE77047C0 +:1019700070B5904DA86800280CD0FFF7F3FF002841 +:1019800062D06022A968FFF71FFCFFF7CCFF0020A0 +:10199000A860EFE76879002856D0FFF774FF044687 +:1019A00080484C3001F0C4FA6060002804D1C9209E +:1019B00074A1800019F0CFFB60680AF0EAF80028F3 +:1019C0000DD0204606F011FD6078010703D5C00850 +:1019D000C000401C2BE0734861684C302DE071481A +:1019E00061684C3001F0ADFA00F05AFB00282BD1B1 +:1019F000FFF749FF04466B4801F09AFA606000283F +:101A000004D164485FA16D3019F0A5FB60680AF04D +:101A1000C4F8002814D0606800886080204609F06F +:101A20002BFE6078010706D5C008C000801C6070DE +:101A3000FFF779FF9EE75B48616801F082FA99E75A +:101A40005848616801F07DFA70BD10B55A4CE160EC +:101A5000A0605A4800F034FC607010BD5649002068 +:101A60000870704770B5564E0546706A94B00C46C3 +:101A7000401C04D1B06AC0430004000C0BD0306A93 +:101A8000C007C00F2870706A19F03CFAB06A207164 +:101A9000000A607114E02B206946087009A96846A5 +:101AA0000AF04BF8002804D0972036A1800019F0E6 +:101AB00052FB0120287006220AA9204619F0C1F91C +:101AC0002878002803D06079C0210843607114B0E1 +:101AD00070BDF0B53A4C0646206895B00D463746C5 +:101AE0000837401C08D16068401C05D1A068401C24 +:101AF00002D1E068401C11D02068314619F002FA8A +:101B00006068311D19F0FEF9A068394619F0FAF93C +:101B1000E06831460C3119F0F5F925E02B206946D3 +:101B2000087009A968460AF008F8002804D0194886 +:101B300014A1553819F00FFB08220AA9304619F0F4 +:101B400080F92B206946087009A9684609F0F5FF5D +:101B5000002804D0A3200BA1800019F0FCFA082271 +:101B60000AA9384619F06DF920692E460836401C3E +:101B700029D16069401C26D1A069401C23D1E069AD +:101B8000401C1FE07372635C686F73745F636F72F5 +:101B9000652E6300DA020000B4B30100D801002012 +:101BA0006D170000A40B00206E52463531383232DA +:101BB00000000000880700202400002071190000A8 +:101BC0008000001012D02069294619F09BF9606945 +:101BD000291D19F097F9A069314619F093F9E069C8 +:101BE00029460C3119F08EF915B0F0BD2B2468464A +:101BF000047009A909F0A1FF002803D0F649F748AD +:101C000019F0A9FA082209AF28460AA919F019F90A +:101C10006846047009A909F090FF002804D0EF4835 +:101C2000ED49C01D19F097FA0822391D304619F008 +:101C300008F9D9E770B5EA4C0546A068002804D039 +:101C40000320E549000219F086FAA56070BD10B5C1 +:101C50000146E44801F075F9E1498879401CC0B2B9 +:101C60008871012803D1E048407800F04DFB10BD99 +:101C700070B50446DD4816460D46814204D1D7486A +:101C8000D549CB3019F067FA012E05D0E120D249B1 +:101C9000800019F060FA70BD66202070002020726C +:101CA000A5810120A07370BD70B515460C4606468F +:101CB000FFF758FE00280CD06621017046800121F4 +:101CC000017221680161A18881820573FFF72BFEF3 +:101CD00070BD1321304607F078FB70BDC2494968DA +:101CE000884201D210207047032101700020704704 +:101CF00070B5BD4C05462078002694B0002801D070 +:101D00000820E4E6BA4A6260954201D21020DEE67D +:101D10006868002809D00921D82804D3C31C9B086F +:101D20009B00834205D00846D1E60320400268604C +:101D30000EE0012109074B6B896B4B43AD49511AEA +:101D40000122591AD202891A814201D20421EAE7FA +:101D500000F052FF6178A0680CF04EFBE068401E76 +:101D600007280BD8302269460A70887068460DF043 +:101D700088FF002802D009A80CF0FBFC2846FFF7DA +:101D800010FD012020703046A1E6F8B504469648C3 +:101D90000F464068814208D3002C01D0844204D30E +:101DA000E01C80088000A04201D01020F8BD8C48C3 +:101DB0008178002911D039880091417860225143FF +:101DC0000D18287B0C350007000F3B4600222946E2 +:101DD000FFF776FD060004D015E0002038800520CE +:101DE000F8BD002C13D039880098814201D90C2607 +:101DF0000DE028783B460007000F22462946FFF7F2 +:101E00005FFD060005D00C2E01D000203880304642 +:101E1000F8BD734C6078401CC0B26070092801D1D5 +:101E200000206070A078401EA07068784107490FBC +:101E300001290ED0022906D003291AD066496E481E +:101E400019F089F9E3E7C006E1D46868FFF7FFFEFF +:101E5000DDE7644869684C3001F073F86079401C34 +:101E6000C0B260710128D2D15F48407800F04CFACE +:101E7000CDE7E079401CE071C9E7604A10B59042B7 +:101E800009D3594A0124A4045268A04201D39042C4 +:101E900001D3914201D2102010BD00F0FEFE10BD12 +:101EA000564B10B5994209D34F4B0124A4045B68EB +:101EB000A14201D3994201D39A4201D2102010BD10 +:101EC000022803D0102801D0092010BD00F00BFF1C +:101ED0000028FAD0052010BD484B10B598420DD30C +:101EE000414B0124A4045B68A04201D3984205D36E +:101EF000994203D3002A03D09A4201D2102010BD88 +:101F000000F017FF0028FAD0072010BD10B50446D6 +:101F1000354894B04068844202D2102014B010BDFD +:101F20000F2008A9087369460BA809F006FE0028CF +:101F3000F4D16846007A207068464089608068461F +:101F40008089A0800020E9E710B500290BD0264A3F +:101F50005268914202D30B68934201D2102010BD07 +:101F60008A88002A02D001F037FE10BD092010BD7A +:101F700010B5224A94B091420ED31B4A01239B0410 +:101F80005268994201D3914206D3441E1E2C41D877 +:101F9000994203D3914201D21020BFE7012837D1E3 +:101FA00008780024C007C00F002803D0032069462A +:101FB000887001E06846847038206946087009A975 +:101FC000684609F0BAFD002804D004480CA18B38FB +:101FD00019F0C1F82046A1E7841B0000AA02000006 +:101FE00088070020A40B002024000020FFFF000031 +:101FF00000220020000000202104000000C0010099 +:102000007372635C686F73745F636F72652E6300D5 +:10201000072083E70246203A1F2AF9D806F001FE7E +:102020007CE710B5604A5268914201D2102010BD81 +:102030000246203A1F2A02D806F068FE10BD07208B +:1020400010BD70B50546594C002020702046461939 +:1020500055484660E01C80088000A04204D0FF2064 +:102060005349293019F077F801200007C06AC043AE +:102070000006000E03D14F480068401C03D04E48B4 +:102080004E49301AC862A8B20422214604F00DF964 +:10209000002804D0FF204649393019F05CF870BDA3 +:1020A000F0B595B03B2008A9087369460BA809F064 +:1020B00044FD002804D0FF203D49813019F04BF841 +:1020C0003F4E00246D4630E02F19B87DC10706D081 +:1020D000400704D460004019C08809F0E9FB394882 +:1020E000807900281FD0B87D80071CD5600040197A +:1020F000C0880022062109F0F7FB002813D03C21FC +:1021000008A8017360004019C1886846C185694606 +:102110000BA809F012FD06000BD0FF2024499630D1 +:1021200019F019F805E0641CE4B268460079A04291 +:10213000CAD8304658E5F7B50546007800270009AB +:102140000C463E46062804D0FF201949BF3019F03E +:1021500002F8287A00280ED0012814D0FF20144954 +:10216000E03018F0F8FF0298002C068001D027809C +:1021700066800020FEBD02270926002C10D0A88909 +:10218000A080A87B0AE003271426002C08D06888CA +:10219000A0802869E060A88A2082287B2072E2E77C +:1021A00002980680E5E700002400002000220020BD +:1021B000002000000010001000000020000500407A +:1021C000043000008807002010B56038030019F0C3 +:1021D000E3F80A060A0F13181F252930353A086854 +:1021E000FFF786FD10BD05C91146FFF7CEFD10BDF6 +:1021F0000868FFF773FD10BD05C91146FFF73DFEE6 +:1022000010BD4B6808788A681946FFF749FE10BD73 +:102210008A6809C91946FFF75FFE10BD0868FFF715 +:1022200075FE10BD08884A6880B21146FFF78CFE23 +:1022300010BD05C91146FFF79BFE10BD05C911462B +:10224000FFF7EFFE10BD012010BD01207047000018 +:102250000E4A12680C498A420AD118470B4A126882 +:10226000094B9A4204D101B500F08EFE03BC8E46A4 +:10227000074909680958084706480749054A064BAF +:102280007047000000000000BEBAFECA64000020D3 +:1022900004000020F0210020F021002001203F490F +:1022A000400608603E4908603E490A68FF231B0259 +:1022B0009A4383121A430A6038498039086070478C +:1022C00010B502460420384904E0C3005B181B79AE +:1022D000002B0AD00346401EC0B2002BF5D133A11B +:1022E000432018F038FFFF2010BDC300CA50002261 +:1022F00059184A718A7101220A7110BD2A4A0021B7 +:10230000C00080180171704710B50446042803D33B +:1023100026A1522018F01FFF2348E1000C18207955 +:10232000012803D021A1532018F015FF6079A1796D +:10233000401CC0B2814200D06071012017494006A4 +:102340008031086010BD70B5164804250068164E2F +:102350000004800F1B4C02281AD014A1692018F029 +:10236000FAFE15E02078C10088190279012A07D108 +:10237000427983799A4203D04279827170588047BA +:102380002078401CC0B22070042801D300202070A7 +:1023900028466D1EEDB20028E4D170BD80E100E05A +:1023A00080E200E018E400E0200C00207372635C1F +:1023B000736F635F7369676E616C6C696E672E63C0 +:1023C000000000003400002010B5EFF31080C407B7 +:1023D000E40F72B6D2484178491C41704078012818 +:1023E00001D10AF0FFF9002C00D162B610BD70B522 +:1023F000CB4CE07800280AD10125E570FFF7E4FF17 +:102400000AF0F8F9002804D000200AF0CBF90020E7 +:1024100070BDC44865714560F9E770B5EFF3108091 +:10242000C507ED0F72B6BE4C6078002803D1BEA17F +:102430008F2018F090FE6078401E60706078002851 +:1024400001D10AF0D3F9002D00D162B670BD10B5EC +:10245000B348C178002904D000214171C170FFF751 +:10246000DCFF002010BD10B504460AF0C3F9AC49EA +:10247000C978084000D001202060002010BDF8B5C8 +:102480000246A74C0026A67108200421012510272A +:10249000130018F081FF0D080A0C0E101214161EFE +:1024A000262123252800257122E0022001E0217148 +:1024B0001EE020711CE027711AE02020F9E70126B8 +:1024C00016E0FFF781FF0AF095F90028FBD00226FD +:1024D0000EE02171A5710BE02771FBE7202000E0E1 +:1024E00040202071F6E7FF208FA1763018F033FEF0 +:1024F0000AF08CF9002809D00AF08EF9B04205D113 +:1025000030460AF08CF90028FAD02CE00120800730 +:10251000C560894900224A60884A9661814B02223F +:102520005A60856086480269D243D206D51702698F +:1025300010231A4302610F466D1C00E020BF78682B +:102540000028FBD030460AF06AF90028FAD0002DA6 +:1025500004D17B48026910218A430261714902203B +:10256000886000207860A07900280CD00AF042F939 +:1025700005460AF09FF8734A002D02D0A260E06081 +:1025800001E0E260A060002E01D100F0A5F8F8BDE6 +:1025900010B504460AF034F9002805D0604901203E +:1025A000C8704A78521C4A702046FFF768FF10BD79 +:1025B000F8B5614DA8680026012802D1AE600AF086 +:1025C000F1F86868012800D16E6028680127544C32 +:1025D000012812D12E606079002803D000200AF073 +:1025E000E1F866712078002807D00AF003F9002886 +:1025F00003D0012080070761A770286901282AD12C +:102600002E6100F05FF8012080074761A079002863 +:1026100015D00AF0EFF800900AF04CF80099002964 +:1026200001D0E16800E0A168411A022901DA8A1CA0 +:1026300011DC0099002901D0E06000E0A060FFF704 +:10264000C3FE0AF0D7F8002804D0012080070761F4 +:10265000A77000E02770E868012812D100F032F876 +:1026600000F030F800F02EF8A078002804D1FF2008 +:102670002DA1033018F06FFDEE60A6702670FFF7F5 +:10268000CCFEF8BD10B5264CE078002801D10AF048 +:10269000ADF801208107886100F014F8A0780028C7 +:1026A0000BD0254CE068002803D10AF0B8F80028C8 +:1026B000F8D10020E06000F005F800201949C0437F +:1026C000886010BD08B55020694608806A461088A9 +:1026D000411E1180FAD208BDF8B51248192787604B +:1026E000154900200860C8600AF084F8BE0701247C +:1026F0000B4D002802D03461AC7000E02C70FFF765 +:1027000063FE084847600D4928798863FFF7DAFFC0 +:10271000B461FFF7D7FF0849002008617461F8BD74 +:1027200038000020000300407372635C736F635FC6 +:10273000636C6F636B2E6300000100400005004076 +:1027400000ED00E0FFFFFF7F8107C90E002808DAD7 +:102750000007000F083880082E4A80008018C069E2 +:1027600004E080082C4A800080180068C8400006F9 +:10277000800F704710B50D20FFF7E6FFC4B20420AC +:10278000C043FFF7E1FFC0B2844203D023A11A2067 +:1027900018F0E1FC26490120486010BD0121254ABE +:1027A00048031060244B00221A60244A5160244AD6 +:1027B0001060244A11601F49803908607047012168 +:1027C0001C4A480310601F4A51601B4A00211160D7 +:1027D0001B490860704710B517490868012804D0E4 +:1027E0000EA1572018F0B7FC10BD114880680022D8 +:1027F000C0B20A6009F0BEFC10BD10B50E480168F9 +:102800000029FCD0FFF7E7FF01200D4940030860D5 +:1028100010BD000000ED00E000E400E07372635CB6 +:10282000736F635F68616C5F726E672E6300000098 +:1028300000D5004080E100E000D1004000D300401E +:1028400080E200E000D0004030B40121BC48C90261 +:102850000160CD1005604A030260BA4803681B029C +:102860001B0A036004680023240A24020460B6489B +:102870000468240A24020460B4480124446084608B +:10288000B34C23606360A360B24B19601D601A6093 +:10289000B14B19601A600121016030BC704710B45F +:1028A0000121A748CA0202600B0203600C06046003 +:1028B000A64841608160A94841680029FCD1A4492B +:1028C0000020086048608860A248026003600460DD +:1028D00010BC704701219F48C9020160C910016006 +:1028E0007047002805D0012805D0022805D19C4852 +:1028F00070479C4870479C48704710B59BA18B203F +:1029000018F029FC002010BD70B500219E4C9F4D91 +:102910009F4A8F4B002808D001281DD0022822D0C2 +:1029200092A1B32018F017FC70BD01200004A06034 +:10293000A86011601960974BC2039A60964A906034 +:102940007F4A0012106095480160864801609448F3 +:1029500001609448017070BD01204004A060A8602F +:102960005160596070BD01208004A060A860916032 +:10297000996070BDF8B59446834A8B4F834D00240F +:102980000126002808D0012832D0022840D077A1A3 +:10299000E82018F0E0FBF8BD891E0902090A0120B1 +:1029A000000490603C6468606C4A1164012B1DD087 +:1029B00000217C4A7D4B51706146DC63DE637C4BB9 +:1029C0005C6002249C6004241C61744B3D311960DE +:1029D00073490E605F4B891519606F4B58605E48F4 +:1029E00001606C49C00548601670F8BD0121E0E740 +:1029F0000120704E4004704F012B04D134645060AC +:102A000068603964F8BD9060346468603964F8BD0A +:102A100001206A4E80046A4F012BF4D1EEE74F4843 +:102A20004068704770B54A4D28680026564C01280A +:102A300006D1A068C00303D501200004A0602E6069 +:102A40006868012809D1A068800306D501204004E8 +:102A5000A0606E6001200AF0B9FEA868012809D1C3 +:102A6000A068400306D501208004A060AE6002206B +:102A70000AF0ACFE70BD10B54A490878002818D09D +:102A80000120444AC0079060434AC00B90602C4A22 +:102A900000121060414A00201060324A1060404A23 +:102AA000106008704A78002A02D048700AF08EFE42 +:102AB00010BD0320FAE70120424900060860704774 +:102AC0000120244900060860704701203D49400567 +:102AD0000860704701201F4940050860704733496E +:102AE0000020C86388151B4908607047410A364AB0 +:102AF000C005C00D5043801C5143400A0818704760 +:102B000010B4324C430B63431B0C5C020C602E4C24 +:102B10006343C31A2E485C0258432B4B400D43437A +:102B2000E31A0124DB0324041B191B1613700A6823 +:102B30001018086010BC704710B50AF01BFF10BDDC +:102B400080E100E008E400E018E400E000B00040AC +:102B500040B1004080E200E000E100E000B500404C +:102B600048B100404081004044B100407372635C52 +:102B700072656D5F68616C5F6576656E745F7469C0 +:102B80006D65722E6300000000B3004040B300404A +:102B900040B5004000F50140008300404085004002 +:102BA000008200404800002000B10040C08F00407B +:102BB0000085004004B1004004B5004008B1004069 +:102BC00008B5004000E200E0093D00003786000043 +:102BD0006F0C010010B50AF0B9FE10BD00200449C9 +:102BE000C863012001218140024A116000BF704783 +:102BF000C01F004080E200E010B50DF05DF909F063 +:102C0000F7F9FEF7C3FB0FF0F5FA0DF08FFF0DF0AB +:102C10001BFF10BD70B50C46054603F0A7FA214610 +:102C200028460EF0C2FF70BD70B50D46040012D0EC +:102C3000002D10D02101284618F060F910225449C7 +:102C4000284618F0FEF852480121083801804480D7 +:102C50004560002070BD012070BD70B54C4E002451 +:102C60000546083E11E0716820014018817BAA7B6F +:102C7000914209D1C17BEA7B914205D10C222946C0 +:102C800018F0B2F8002806D0641C30888442EADBD1 +:102C90000020C04370BD204670BD70B50D460600D3 +:102CA0000AD0002D08D03A4C083C20886188401C8E +:102CB000884203D9042070BD102070BD3046FFF754 +:102CC000CCFF002801DB401C0AE02088616800017D +:102CD00040181022314618F0B4F82088401C20809B +:102CE0002870002070BD70B514460D001FD0002C58 +:102CF0001DD00021A170022802D0102817D108E0B1 +:102D0000687829780002084311D00121A170108051 +:102D10000BE02846FFF7A1FF002808DB401CA0704D +:102D2000687B297B000208432080002070BD0120C1 +:102D300070BD70B5054614460E000AD000203070F4 +:102D4000A878012807D004D9114908390A88904287 +:102D50000BD9012070BD002C04D028782070288861 +:102D6000000A50700220087010E0002C0CD0496856 +:102D70000001411810222046103918F062F8287816 +:102D800020732888000A607310203070002070BD06 +:102D9000540000205A4910B5884207D30121890404 +:102DA000884205D357490968884201D2102010BDD6 +:102DB0000146012005F0CBF810BD30B5044693B0B4 +:102DC00000200D46079014210BA818F099F81C213B +:102DD000684618F095F86A46112010770020507761 +:102DE000107802210843107007A80C90012008AA4F +:102DF000907245486A4610850AA80B902088108476 +:102E000060885084A0889084E088D084907FF921E5 +:102E10000840801C4008400090770820908610876A +:102E200008A80F9010AA0BA9684600F05CFF0028C4 +:102E300003D110A800882880002013B030BD3EB513 +:102E400004460820694608802D48844207D30120A3 +:102E50008004844205D32B480068844201D21020AC +:102E60003EBD2146012005F072F80028F8D12088E7 +:102E7000694688806088C880A0880881E088488189 +:102E800005F065FE01AB6A46002101F0BBFB694617 +:102E900009880829E4D003203EBD1FB50446002060 +:102EA000029008206946088115480391844207D39F +:102EB00001208004844206D312480068844202D272 +:102EC000102004B010BD05F042FE014602AA0F48D2 +:102ED00001F02EFD0028F4D169460989082901D0A6 +:102EE0000320EEE7694609882180694649886180A8 +:102EF00069468988A1806946C988E180E1E70000C8 +:102F000000C0010028000020042A0000FFFF00008C +:102F100010B5031D03600020521E04E05C181C6005 +:102F2000401C2346C0B29042F8DB0020186010BD60 +:102F300001460A680020002A02D0104612680A6082 +:102F4000704702680A6001607047000010B50146D2 +:102F50002022094817F075FF07490020C877084666 +:102F600010BD0649012048610548064A01689142A2 +:102F700001D1002101607047B00E00200005004023 +:102F800064000020BEBAFECA0C4908784A78401C8A +:102F9000C0B2904200D008707047094A074820BF6D +:102FA00040BF20BF4178037843701368002B02D1E3 +:102FB00003788B42F3D00020704700006B000020A4 +:102FC00000E200E00A4A022151600A490B68002B26 +:102FD000FCD0906008680028FCD000205060086891 +:102FE0000028FCD0704701200007406970470000AE +:102FF00000E5014000E401407047704770477047AA +:1030000010FFFFFFDBE5B15100C001006700FFFFCB +:1030100003B40148019001BD09000020002803D03D +:103020008178012939D101E0102070470188FE4ADA +:10303000881A914233D01BDCFC4A881A91422ED068 +:103040000BDC00292BD00320C002081A27D001284E +:1030500025D001210903401A07E001281FD00228CA +:103060001DD0FF281BD0FF380138002815D116E0ED +:10307000FF220132811A904211D008DC01280ED0C3 +:1030800002280CD0FE280AD0FF2806D107E001292B +:1030900005D0022903D0032901D0002070470F205A +:1030A000704700B50B2826D009DC030018F074F92E +:1030B0000B1D2125251B25292325271F1B00112832 +:1030C0001BD008DC0C2816D00D281CD00F2814D0DB +:1030D000102808D10FE0822809D084280FD0852835 +:1030E0000FD0872811D0032000BD002000BD05208F +:1030F00000BDCF4800BD072000BD0F2000BD04204B +:1031000000BD062000BD0C2000BD0D20800200BDCA +:1031100070B500290BD0CB1FFA3B81241E46CDB2DF +:10312000112B1BD2012805D0022806D009E000206F +:1031300010701DE0FF20043001E0FF2003308142C9 +:1031400018D0330018F028F9111613131613161699 +:103150001316161613131313161316000846FF380A +:1031600081381F2803D9FF39FE39022902D815708A +:10317000002070BD1470072070BD00B5030018F06A +:103180000BF9060406040C080A0C002000BD1120EF +:1031900000BD072000BD082000BD032000BD007851 +:1031A0000207120F04D0012A05D0022A0AD10EE02C +:1031B000000907D108E00009012805D0022803D042 +:1031C000032801D0072070470870002070470620B0 +:1031D0007047002807D0012807D0022807D003280D +:1031E00007D007207047002004E0112002E02120D2 +:1031F00000E0312008700020704738B50C4605000B +:103200004FD06946FFF7CBFF002822D12088032149 +:1032100089028843694609788907090D0843208097 +:103220006946681CFFF7BBFF002812D121880320E4 +:1032300000038143684600788007800C01432180A9 +:10324000A8784007820F2020012A03D0022A03D049 +:10325000072038BD814300E00143218088B2010589 +:10326000890F08D0012189038843A9780907C90F6C +:1032700089030843208080B28104890F0AD0A9788D +:103280004004C906C90F400CC903084320808004CC +:10329000800F02D12088400403D5208840210843B4 +:1032A0002080002038BD70B50446002008801546F7 +:1032B0006068FFF7A2FF002815D12189A08981420B +:1032C00010D861688978C90708D00121490288426D +:1032D00008D8491C17F01EFE298009E0FF21FF31A4 +:1032E000884201D90C2070BDFF30FF3003302880A8 +:1032F000002070BD10B5137804785B08E4075B000C +:10330000E40F23431370FD2423400478A407E40F43 +:10331000640023431370FB24234004786407E40F04 +:10332000A40023431370F724234004782407E40FF8 +:10333000E40023431370EF2423400478E406E40FF1 +:10334000240123431370DF2423400478A406E40FF0 +:103350006401234313700078BF244006C00F23404C +:10336000800103431370002906D00878C10701D1FA +:10337000800701D5012000E00020C0015906490E58 +:103380000843107010BD30B50A8803239B020488DF +:103390009A4323059D0F02D1A3049C0F01D09B0FDC +:1033A00000E001239B021A4303230A801B039A4374 +:1033B00003889804840F02D11805830F01D0800F71 +:1033C00000E00120000302430A8030BDF3B593B052 +:1033D0000D000FD0139800280FD01221284617F0A7 +:1033E0008DFD03AAFF21012003F0D5F80024264615 +:1033F00037467AE0102015B0F0BD0720FBE768469D +:10340000807D01280BD16846818A0520C002081AF8 +:1034100010D0012810D0022812D0032812D0042C7A +:1034200014D0052C15D113E002290000012800005A +:1034300003300000012400E002246846468A08E0C8 +:10344000032406E068460424478A02E0052400E0DD +:1034500006246846418A1398814246D12C74002E76 +:1034600041D00DAA0EA905200292019100901023CF +:103470000022FF21304603F02FF9002823D16846AF +:10348000808E2A46C0B20EA9FFF72DFC00281AD163 +:10349000AE81002F27D00DA9052008AE0291009023 +:1034A000132300220196FF21384603F015F9002866 +:1034B00009D16846808EF11CC01EC0B22A1DFFF7DC +:1034C00012FC002801D0032095E708A881784278F3 +:1034D00008021043E881062C05D16846807DA87259 +:1034E0006846808A2881002085E703A803F05CF8FD +:1034F000002884D0FFF7D5FD7DE7002805D0FE4ADF +:10350000012903D0022903D003207047518800E02D +:103510009188814201D1002070470720704770B523 +:103520000C4605461C21204617F0E8FC00202080B0 +:10353000002D08D0012D04D0F0A1F54817F00BFEA6 +:1035400070BD062000E00520A07070BD70B592B07F +:103550001546064601206A461071107453740846D9 +:1035600008300395029048889082FEF7FBF904002A +:1035700019D06580172069468883203600940AABED +:103580007178023307AA01A80EF017F90646607891 +:10359000000701D5FEF7C7F9002E0AD03046FFF725 +:1035A000ECFD12B070BD1321284605F00EFF03207C +:1035B000F7E708A800906846838B0422012128467B +:1035C00007F0B3FEEDE770B506468AB000200D4661 +:1035D00007900590069003A90490052402460291E5 +:1035E0000190102300942946304603F075F8002816 +:1035F0000DD108A804A9009102900194684683891E +:1036000000222946304602F083FE002801D0FFF751 +:1036100048FD0AB070BD10B50EF0D5FA10BDF0B57A +:1036200089B000260546059600780C460827030059 +:1036300017F0B2FE0CFD070C390B75759BBEFCD361 +:10364000E3FD68680A38FEF702FB07E1A88800225C +:1036500080B20421009008F067FB0290002C04D097 +:10366000AB48A6A16E3017F076FD0298002804D171 +:10367000A748A2A16F3017F06EFD0298009908309C +:103680000DF0D0FCFEF76EF9040007D060783843E7 +:10369000607000986080FEF746F9E1E01321009821 +:1036A00005F093FEEAE0002C04D1BD2093A1800038 +:1036B00017F051FD60880022042108F035FB0090CE +:1036C000002804D192488DA1883017F044FD00995C +:1036D000002008802A7994461EE0C3005B199B688D +:1036E00007936B469B8B1A0708D5DA0606D560460A +:1036F000C20050194038C08F088006E05B0409D52D +:103700000871C2005019C0884880607838436070E2 +:103710000226A3E0401CC0B28445DED89EE0E888C3 +:10372000694608800090002C04D1794873A1983034 +:1037300017F011FD2878062813D10098C00B10D07F +:1037400060880022042108F0EFFA060004D17048D6 +:103750006AA1A23017F0FFFC00203071A8887080A9 +:1037600039E060783843607078E0002C04D1684814 +:1037700062A1B43017F0EFFC60880022042108F049 +:10378000D3FA0090002804D161485CA1B73017F04B +:10379000E2FC009808300EF068FA0121484002D19E +:1037A000E888C00B5AD0009861880226C180D8E70B +:1037B000002C04D1564851A1D03017F0CCFC6088C1 +:1037C0000022042108F0B0FA002804D150484BA18F +:1037D000D33017F0C0FC0226C3E7002C04D14C48BC +:1037E00046A1DC3017F0B7FC022661880122204692 +:1037F000FEF73EFA01200590B3E7A889002280B2C7 +:103800000421009008F090FA0746002C04D04048AC +:103810003AA1EE3017F09FFC002F04D13C4837A1AD +:10382000EF3017F098FC6868029001E009E010E0C2 +:10383000288969468881012202A90098FEF734FA96 +:103840000CE0002C8DD16D202CA1C00017F083FC62 +:1038500087E72F4829A1FE3017F07DFC002C0DD002 +:10386000607800070AD50598002807D184202070C9 +:103870002046582229460830FDF7A6FC304609B0FC +:10388000F0BDF7B50C460546007A224688B00A32EC +:103890000492921C01920027811E16323E4602922B +:1038A0000B0017F079FD08F405F348488ED0F2F3C9 +:1038B00068880022042108F037FA0190002803D11B +:1038C0000EA1144817F047FC01980088002802D088 +:1038D0005227072600E151271E26002C70D0688849 +:1038E000A0800120A071019804990079C0004019BE +:1038F000C089FFF76BFD0FE0400C00207372635C22 +:1039000067617474735F636F72652E6300000000FB +:103910006F0200008603000000287DD10198007925 +:10392000C0004019C089208101980079C000401969 +:10393000408AA083F0E0698A0091062820D1E889B6 +:10394000C00B1DD008462230512786B2002CC5D0AE +:10395000A8890199FFF73AFD002872D16888A080F4 +:103960000220A071A88920810120A072288AE0830A +:10397000009820846969009A029817F062FACBE0F7 +:1039800008462030502786B2002CA7D0A889049979 +:10399000FFF71CFD002854D16888A080A889E0802A +:1039A000287A06280AD002202072288AA08300984C +:1039B000E083204669692030009ADEE70120F3E7C2 +:1039C0008FE068880022042108F0AEF90690688A2A +:1039D00000900698002803D1FD49FE4817F0BBFB74 +:1039E000069808300EF041F90121484002D1E889DB +:1039F000C00B25D000985127223086B2002C7AD0F7 +:103A00006888A080A8890199FFF7E0FC002818D1F8 +:103A10000220A071A88900E013E020810420A07298 +:103A2000288AE083009820846969009A029817F038 +:103A300008FA0699002008710698A98941806BE070 +:103A400003200BB0F0BD688804F0DDF900906888B1 +:103A50000022042108F068F901900098002804D1A0 +:103A6000DC48DB492C3017F076FB0198002804D1A4 +:103A7000D848D7492D3017F06EFB0198D649C08839 +:103A8000884205D05127222604E01EE03FE035E0C1 +:103A900050272026002C2ED06888A080502F07D0D9 +:103AA0000220A0712146287B0831FFF738FD33E062 +:103AB000287BA11DFFF733FD6A8800230199009838 +:103AC000FFF744FD0028BCD126E0C449A889C98875 +:103AD000814207D154270626002C0CD06888A0808C +:103AE0001AE008E053270826002C04D06888A0803C +:103AF000A889E08010E00A98068013E05527072681 +:103B0000002CF8D0A889A0800020A07104E08D20AE +:103B1000AF49C00017F01FFB0A98002C068001D0A7 +:103B20002780668000208CE7AC4900200870704731 +:103B300030B585B00C4601F0DBF90546FF2804D10D +:103B4000A448A349953017F006FB0020208020717F +:103B50006080401EE0802046294608300DF056FA6D +:103B60006A462946012002F016FD102412E068463C +:103B7000808800070ED56846C0882946FFF723FDD8 +:103B800068468188FF2321438180C0882946019AA5 +:103B900002F02CFE684602F007FD0028E7D005B0D1 +:103BA00030BD0A46014610B5104608300DF042FA05 +:103BB00010BD70B505460022042108F0B5F80400D8 +:103BC00004D184488249B73017F0C5FA2046294607 +:103BD00008300DF027FA70BDF0B591B00C460746DD +:103BE00004F011F9050005D02878222804D2082015 +:103BF00011B0F0BD7A48FBE700220421384608F0F6 +:103C000093F80646002C02D0A08800280CD0012092 +:103C1000694608710220087400204874002C05D001 +:103C2000A0880883206802E00920E1E70883059066 +:103C30003046083003970290FDF794FE040018D038 +:103C40006780172069468883203500940AAB69781D +:103C5000023307AA01A80DF0B0FD05466078000701 +:103C600001D5FDF760FE002D09D02846FFF785FA43 +:103C7000BEE71321384605F0A8FB0320B8E708A8E3 +:103C800000906846838B04220121384607F04DFBE3 +:103C90000021C943F180ABE7FFB585B00E9E778860 +:103CA000384604F0B0F8054600220421384608F0F2 +:103CB0003BF80446002D03D145494A4817F04BFA1A +:103CC000002C04D147484249401C17F044FA0834FC +:103CD000089869460394C1C105A80DC820356978C4 +:103CE0000DF0DAF9CBE5F0B50446002099B00D46A9 +:103CF00001460D9010A88181164601818180374AC6 +:103D000068469180018510A80180684601878185F9 +:103D100081841078012808D0022806D0032804D016 +:103D2000042802D0082019B0F0BD2F4A944273D362 +:103D30002E4F0121890438688C4201D3844278D304 +:103D4000294A954275D3012189048D4201D38542C8 +:103D50006FD36168002913D0234A914269D30122AD +:103D60009204914201D3814263D3608921898842C0 +:103D700003D801225202914201D90C20D3E70D90C1 +:103D800016AA0EA92846FFF78EFA0028CBD168683C +:103D900080784007800F02280AD16846008F80048F +:103DA000800F05D02869002802D03968884240D3A6 +:103DB0000AA92069FFF721FA0028B4D12069002858 +:103DC0001CD0607880076846008D14D580040FE011 +:103DD000FC380000EE030000FFFF0000400C002054 +:103DE000023000000C05000000C001002800002087 +:103DF000800F68D002E08004800F64D16846008D97 +:103E0000810618D58004800F606806D0002812D083 +:103E1000396888420DD302E00BE000280BD0FE4940 +:103E2000884206D301218904884204D33968884234 +:103E300001D2102077E709A96069FFF7DEF90028B1 +:103E40009CD16069002808D06846808C0105890FE4 +:103E5000012938D18004800F35D00BA9A069FFF764 +:103E6000CCF900288AD16846808C80062BD468461D +:103E7000808D810627D4A169002906D00105890F0C +:103E8000012920D18004800F1DD0E068002804D0D3 +:103E90000078002817D01C2815D204AA611C2046DF +:103EA000FFF728FA0121890210A80180012768463E +:103EB0008773DA49818104AA033217A92868FEF7BB +:103EC00038FF002801D007202DE710A8007F15A992 +:103ED000C01CC2B200200C920190FF320090034639 +:103EE0000291FF3203A80332109902F0ACFA0028C5 +:103EF00026D110A9888A0F902A892969C84801917A +:103F00000092029010A90A8B6B8928680E9902F022 +:103F10009AFA01007ED1C2480025001F81886846B8 +:103F20004174090A8174052104A86A4623C210A8B5 +:103F30002A46FF21808A0C9B02F0EAF9002802D071 +:103F4000FFF7AFF8EFE66846007C0322C1090020C6 +:103F5000920290430122920280181490002928D0E6 +:103F6000014610A8018068462921877309028181D2 +:103F7000058608A8007C0023410860784900C00736 +:103F8000C00F014308A80174FD2001406078A54AD4 +:103F90008007C00F4000014308A801740CA902204B +:103FA00001910090029503A8109902F04CFA0100CB +:103FB00030D16068002828D0206900280DD10AA9D6 +:103FC0000EA8FFF7E0F96078800706D46946088DEF +:103FD0000321090388436946088590496846877329 +:103FE000FE3181818F492089891E16F093FF626816 +:103FF0000D9811AB0192009002930A46002303A88A +:104000000A9902F020FA010004D12078C10603D4F5 +:10401000800600E085E02AD56846058660690028AC +:104020000DD109A90EA8FFF7AEF96846818C0320CF +:104030008002814301208002091868468184694614 +:10404000888CC82108436946888474488F73FF3080 +:10405000888112AA0CA902200292019100900023EB +:10406000704A03A8099902F0EEF9010059D12078AD +:10407000C00729D068460586A06900280DD10BA984 +:104080000EA8FFF780F96846818D032080028143E6 +:10409000012080020918684681856846818D40208C +:1040A00001436846818587735F49818113AA0CA902 +:1040B000022002920191009000235A4A03A80B9912 +:1040C00002F0C1F901002CD1E06800282DD010A821 +:1040D00014990180544968468773491C8181E168BD +:1040E00008A80A78027449784174E068412241883E +:1040F00068464186E0680023017908A80175E068F8 +:10410000D200C18808A84175090A81750CA8072149 +:1041100001900091029503A8109902F094F9010012 +:1041200003D00F9800F0E8FEFDE53D480321001F95 +:104130000170002E0AD08088308010A8808870809E +:1041400010A80089B08010A88089F0800020EAE5DE +:1041500030B501248BB015460B46012802D0022849 +:104160001CD104E0684605218473C90203E02B4991 +:1041700068468473891E8181002B12D003210020A0 +:10418000890288430121890240186946888405AA6A +:1041900004A91846FEF7CDFD002804D007200BB077 +:1041A00030BD1020FBE76A46127C1D480092801E3D +:1041B00005A9FF3201910290FF32002303A80332C8 +:1041C000099902F040F9002802D0FEF76AFFE6E7FD +:1041D0001348001F002D01D0418829800470002061 +:1041E000DDE770B592B00446012608A886700F4935 +:1041F0006846018410AA08A93046FFF7A9FF0028E5 +:104200004ED12078064DC00700242D1F002849D02C +:104210001C2168460CE0000000C0010003280000DB +:10422000440C0020030200000329000001180000D4 +:1042300016F066FE6846017820200143684601704A +:1042400008A88670F9496846018411940794817F13 +:10425000F92001406846891C8177002001466846A4 +:104260000177002001466846417704218185C48595 +:10427000018607A80A9011A80D9008A809900EAA17 +:1042800009A96846FFF72FFD002809D16846008F6D +:10429000E8806846808F2881401C68812C7000204F +:1042A00012B070BDEC802C8110A80088F4E7F7B53F +:1042B000DF4900260A789EB0012A04D0022A02D0E3 +:1042C000082021B0F0BD4A88824201D00620F8E7DC +:1042D0001F98824201D10720F3E7012210A98A75B5 +:1042E000D4488882002003239B020146994393020D +:1042F000CB1810A90B8669468A81CF4ACA8118A9B2 +:10430000887110A9888419A904916946CA82069007 +:10431000FF20087503A802F06AF900242546274605 +:1043200008AA052103A802F065F9002810D0822808 +:104330006FD1002C6FD0002D6DD010A88480C58067 +:104340000021017418A8807B11AC012865D06DE0B4 +:1043500008A88079002F21D0012857D16846818C88 +:10436000B44881421CD113AA0DA905206B4607C38E +:104370006846408C10230022FF2102F0ADF900288E +:1043800068D110A88089042801D006284CD168463D +:10439000818E1F98814239D10F2092E7012835D1B3 +:1043A0006846808C0521C902884202D0491C884297 +:1043B0002CD19F4841886846408C814201D1012719 +:1043C00000E00027002C01D0002D10D01F9988425A +:1043D0001CD113AB0DAA05216E460EC60446102350 +:1043E0000022FF2102F078F9002833D101E03546A0 +:1043F0000CE010A88089022801D0102814D1C0B286 +:104400001BAA0DA9FEF76FFC00280DD16846468C4B +:1044100086E71FE0FFE7052053E714A91BA8221D2C +:10442000FEF787FC002801D003204AE710A8007C93 +:104430000023001DC2B210A80274209802900194BB +:10444000009215A81C9901F0FEFF002802D17849BE +:1044500002220A70FEF725FE33E710B50B46401E18 +:1044600086B084B203AA00211846FEF743FF04AACF +:10447000052103A802920191009001230022FF214F +:10448000204601F045FF04466846008A012804D012 +:104490006D206A49000116F05EFE2046FEF701FE1F +:1044A00006B010BDF0B5624F0446387887B00E46AE +:1044B000032804D0042802D0082007B0F0BD04AAC5 +:1044C00003A92046FEF7EFFE0500F6D1606880786C +:1044D0004007800F02280DD1684680898004800F34 +:1044E00008D02069002805D055490968884201D2C2 +:1044F0001020E2E7208905AA6B46216907C36946B7 +:104500000A8A63892068039901F09DFF002802D080 +:10451000FEF7C7FDD1E7002E02D06846808A3080C2 +:10452000042038702846C8E738B50C00054609D085 +:1045300000236A46FF2102F031F9002804D0FEF77B +:10454000B0FD38BD102038BD69462046FEF755FE47 +:104550000028F8D1A078FF21C307DB0F2846009A76 +:1045600002F044F9EBE73EB50C0009D002AB6A4615 +:10457000FF2102F013F9002804D0FEF792FD3EBDA2 +:1045800010203EBD0321204616F0B8FC6846008886 +:1045900001A90005800FFEF71CFE00280BD168461C +:1045A000007920706846008801A98004800FFEF71A +:1045B00010FE002801D003203EBD684600796070DF +:1045C000A278EF20024068460088C10B09010A4327 +:1045D000F7210A404104C90FC9000A43A270F9211A +:1045E0000A40800601D5022000E001204000694613 +:1045F0000243097A50084000C907C90F0843A07058 +:1046000000203EBD7FB514460522019203AD029500 +:1046100000930A462388FF2101F07AFE69468989C2 +:104620002180FEF73EFD04B070BD0000052A0000A9 +:10463000400C002002280000FFFF0000FC380000B2 +:1046400028000020F3B5002799B068460C4607877C +:104650003D4600291DD0E068002806D0A06800284B +:1046600017D001886A4611870780199803F0CBFBA1 +:10467000002811D0007822287ED3199800F038FC49 +:10468000009000220421199807F04EFB060009D182 +:1046900004E010201BB0F0BDFC48FBE7FC49FD48DE +:1046A00016F059FDA078012803D0022801D0072078 +:1046B000F0E72088002808D0401E80B203AA0099A5 +:1046C00001F069FF002859D11DE0F048401CE1E7E6 +:1046D0006946498A228891420BD26846807D00252E +:1046E000012810D16846808AEB4988420BD1012508 +:1046F00009E0914203D1002D2AD06D1C01E0022D6A +:104700000BD0032D04D203A801F04EFF0028DFD008 +:1047100082281BD0002831D11DE06946897D0129FE +:10472000F1D16946DC4B8A8A5B1ED11A9A420FD0BE +:1047300005DCDA48101A0BD00128E4D108E0012981 +:1047400006D0FF390129DED10325E1E7022D15D17D +:104750000D2080029EE7E068002816D00EA90522F1 +:1047600002910192009069460B8FA2882088FF2158 +:1047700001F0CEFD002800E01DE002D0FEF791FC24 +:1047800088E76846A168008F08806846008AC006EE +:1047900001D5C3487EE70798002803D06846008B00 +:1047A000022801D0032075E70798A1780078012935 +:1047B00003D0800710D408206CE7C007FBD000228C +:1047C0000721199807F090F8002802D00725022049 +:1047D00004E0AE48801C5DE70225032008A90870AC +:1047E000218868468185199808360A90099617210C +:1047F0006846818712AB02330FAA052108A80097EB +:104800000CF0DBFF002802D0FEF7B7FC42E710A84F +:1048100000906846838F04222946199806F085FD8A +:1048200038E770B5064615460C460846FEF7F6FB17 +:10483000002804D12A4621463046FFF789FCF3E6DA +:1048400010B5FFF734FD10BD70B51E4614460D00BF +:1048500014D0002C12D0616800290FD00121FEF77E +:104860004CFE002809D12068FEF7D8FB002804D1AF +:10487000324621462846FFF736FAD5E61020D3E621 +:1048800070B515460C000ED00221FEF736FE00284A +:1048900008D12068FEF7C2FB002803D12946204634 +:1048A000FFF700FEC0E61020BEE6F8B506467D48DC +:1048B0000D46016814468A4231D36068002808D04A +:1048C000794A90422BD301229204904201D388422C +:1048D00025D37648864204D0304603F094FA002867 +:1048E0000CD0304600F004FB0646284600F0BDFA26 +:1048F000002804D16068002802D012E06348F8BDA7 +:1049000000236A463146284601F048FF002802D0BD +:10491000FEF7C7FBF8BD68460088800601D410206A +:10492000F8BD6188224628466368FFF76BFEF8BD34 +:10493000F7B55C4E0746306886B01446824202D214 +:10494000102009B0F0BD384600F0D2FA05465748AD +:10495000874201D0FF2D08D0002304AA29460798DA +:1049600001F01CFF002826D101E04848E9E768462D +:10497000008AC00601D54A48E3E703A90020029156 +:104980000527019000976288484B2946079801F057 +:10499000A3FE00280FD161683268914208D30191CB +:1049A00002900097238862882946079801F094FEB8 +:1049B000694689892180FEF774FBC2E7002907D088 +:1049C0003B4B0A881B899A4202D83048401C7047EA +:1049D00038E610B586B004236C46A382344BDC88DD +:1049E000002C07D01B898B4201D2914204D9274861 +:1049F000401C55E5062053E56B4619825A8200217A +:104A0000009101911C800221997005A9029104A9CD +:104A100003916946FFF716FE42E5F3B50C4685B0F3 +:104A2000812069460873002C1AD0059803F0EBF931 +:104A3000070017D03878222868D3059800F058FA74 +:104A4000049000220121059806F04EFF00280BD0AB +:104A500000220421059807F067F905000AD105E056 +:104A600010202AE5094828E5112026E508491148C3 +:104A700016F071FB284608300CF0F6FA064620784E +:104A8000012819D0022838D0072016E5023000008E +:104A9000FC380000E10800000328000000280000A6 +:104AA000013400002800002000C00100FFFF0000CA +:104AB000400C0020840A0000A18803AAFEF728FB0E +:104AC0000028CED1B00721D56846007B00281FD131 +:104AD000A079C0071CD0E068002205216B4607C3FF +:104AE000638922896888049901F012FC6946087379 +:104AF00000280DD0FEF7D5FADFE4A18803AAFEF75F +:104B000007FB0028ADD13420064201D10820D4E4AF +:104B10006846037B29463846059AFEF717FDCCE424 +:104B2000FFB597B0002001901F4615460C460E4673 +:104B3000179803F068F9002804D00078222803D2DF +:104B40000820A7E5F348A5E5B80801D00720A1E5AE +:104B5000032F00D10027179800F0CAF90890002C05 +:104B60001BD0022D77D3EC48006884427CD36119B6 +:104B70000091012902D0491E814275D3AD1EAAB20F +:104B80002146E6480DF0F0F800991E394A7F0B7F68 +:104B900011021943884267D1ADB2E148B90702D585 +:104BA0000189491C00E0012189B20091F90701D077 +:104BB000078900E0D94F03AA0899009801F0EBFC9F +:104BC0000DE0F078B1780002084310284CD8019924 +:104BD000091D401880B20190A84245D82618002E21 +:104BE00060D0707831780002084300998842E8D399 +:104BF00058E06946098A0A0754D5002C3FD0019A2B +:104C0000A618121D92B20992F278B37812021A43D2 +:104C10009446102A28D8099A6244AA4224D8727865 +:104C2000337812021A4390421ED1C8061ED5099845 +:104C30000AAA052120186B4607C370783178000254 +:104C4000084363460022089901F062FB002803D064 +:104C5000FEF727FA1EE507E0F078B1780002084376 +:104C60006946098D884201D00B2013E5F078B178B0 +:104C7000000208430999401880B2019006E0C90675 +:104C800004D50899FEF79FFC0028E3D16946088AFD +:104C90001021884369460882488AFF23049A0899AC +:104CA00001F0A4FD03A801F07FFC002803D16846B1 +:104CB000408AB8429DD900220421179807F034F8A1 +:104CC000040003D19749984816F045FA2088002837 +:104CD000C0D0012108A80170017300264673218805 +:104CE0006846018620460830099017980A90FCF71C +:104CF00039FE05001BD01798688017206946888008 +:104D000010AB023301AA052108A800950CF055FD4F +:104D100007466878000704D583488249223016F098 +:104D20001AFA002F09D03846FEF727FAB2E4132109 +:104D3000179804F04AFB0320ACE40EA800906846E4 +:104D4000838804220121179806F0EFFA00288CD1FD +:104D500026809FE4F0B500248DB01F4615460E4610 +:104D6000002A04D0B90804D007200DB0F0BD1020EF +:104D7000FBE7032F00D1002700F0BAF80390FF28CB +:104D800004D06749B80703D5488902E06148ECE7D9 +:104D90000120FA0702D04989491E00E05F4906AAAE +:104DA0008FB2039901F0F7FB38E06946898B090758 +:104DB00034D504AB05210022029300910192574B98 +:104DC000039901F089FC002821D1002E21D06A46E8 +:104DD000128A2988A2183019121D914234D36946CB +:104DE000CA8B0270120A42700A8A8270120AC2705A +:104DF00004A90522001D0092029101906946C88B0A +:104E00000B8A0022039901F067FC002801D00320DF +:104E1000ABE76846008A2018001D84B206A801F09E +:104E2000C3FB002804D0822806D0FEF73AF99CE79D +:104E30006846C08BB842B8D9002C07D0002E10D0DD +:104E40002988A01C814203D20C208EE705208CE724 +:104E50002246314631480CF087FF31190870000AAC +:104E60004870A41C2C8000207FE700B585B06946FF +:104E7000FEF7ACFA00280AD16846007C030016F061 +:104E80008BFA08052F2F2F2F08080531032005B0B6 +:104E900000BD68468078012807D168460088032154 +:104EA000C902401A1CD001281AD06846807901280E +:104EB00006D16846808815214902401A05280FD975 +:104EC0006846807A012811D16846018929200002AC +:104ED000081A05D0022803D0032801D0042805D1E0 +:104EE0000F20D4E711A1164816F035F90020CEE7BF +:104EF00010B506F00FFF10BD10B50C4601F01EFBFB +:104F0000002803D009A10F4816F025F92046FEF726 +:104F1000C8F810BD0230000028000020FFFF00008C +:104F2000400C0020FC3800003F0B00007372635CF3 +:104F300067617474735F636F72652E6300000000B5 +:104F400022020000BB060000F8B500780C461646A9 +:104F500010340E36069F022809D0032836D00528C3 +:104F60007ED0FF20F6A1E53016F0F5F8F8BDCD892A +:104F70000A2068430E30188031203880002AF5D08E +:104F8000087B9581801FC7B21AE020886168308055 +:104F900048780A7800021043F080C8788A780002C6 +:104FA00010433081B21C3846091DFDF79CFE002FCE +:104FB00001D0002802D000203071708008340A36F9 +:104FC00028466D1EADB20028DFD1F8BDCD890A207C +:104FD00068430E30188032203880002AF5D0087BD4 +:104FE0009581401FC7B243E0616822880878F2804B +:104FF0003279C30752085200DB0F1A43FD231A40CF +:105000008307DB0F5B001A43FB231A404307DB0FC8 +:105010009B001A43F7231A400307DB0FDB001A43F8 +:10502000EF231A40C306DB0F1B011A43DF231A408C +:105030008306DB0F5B011A43BF231A404306DB0FD5 +:105040009B011A433271C00970718A784B78100243 +:105050001843308132463846C91CFDF744FE00E053 +:105060000CE0002802D00020B070308008340A36EE +:1050700028466D1EADB20028B6D1F8BD087BCD899B +:10508000801E86B2304608306843103018803420C5 +:105090003880002AF1D0174695811037E800D68174 +:1050A000C01900900DE02088388000987860324662 +:1050B0006168009815F0C5FE00980834801908371B +:1050C000009028466D1EADB20028ECD1F8BDFFB5AA +:1050D00081B00A9D1E460C46002A05D0607AFF303A +:1050E0000130D080E089108101980E2700780300FC +:1050F00016F052F90B7E0719293541536C787878F0 +:105100007E000092087B082805D0032803D091A1D7 +:10511000954816F020F8378030200FE000990020E5 +:10512000888105B0F0BD0092087B042804D08E4829 +:1051300088A1143016F00FF83780312028800098AD +:105140000028EBD1EDE70092087B042804D09320DF +:1051500080A1800015F0FFFF37803220EEE700923B +:10516000087B022804D080487AA13A3015F0F3FF7A +:1051700037803320E2E7087B1746042804D07A48BA +:1051800074A14C3015F0E7FF1020308034202880C7 +:10519000002FC6D00020B88116E0207B17460528D6 +:1051A00006D0062804D070486AA1603015F0D3FFFD +:1051B0001220308035202880002FB2D0E089B881BD +:1051C0000020388201984088F881AAE70092087B85 +:1051D000072804D064485FA1713015F0BCFF378008 +:1051E0003620ABE733460095019800F00AFC98E7BB +:1051F0002F2053A1000115F0AEFF92E770B50C46C9 +:10520000054602F000FE002804D00078222803D2D0 +:10521000082070BD554870BD00220521284606F0C3 +:1052200083FD2060002801D0002070BD032070BDE8 +:10523000FFB58BB00D4607461720694608850E98C6 +:1052400003261446002805D10EA93846FFF7D6FFDD +:10525000002834D1002D0BD000220321384606F05F +:1052600043FB002834D00E980078002830D108E0A5 +:105270002078092819D00F2823D031A13C4815F0F7 +:105280006AFF0E98A760801D03AA606002320AA917 +:10529000204600F00CFC002827D0030016F07CF814 +:1052A000071A182323211C1E23000726002231463B +:1052B000384606F019FB0028E3D12C48801C0FB0BB +:1052C000F0BD00220321384606F00EFB0028D8D19D +:1052D0001120F4E70020F2E70820F0E72348401C03 +:1052E000EDE70720EBE70320E9E701A80090684617 +:1052F000038D04223146384606F017F80028DED127 +:10530000002DDCD00E990D70D9E730B587B01D4661 +:105310000C46002A11D0042369460B7013888B8138 +:105320005288CA81A2788A7422880A8200236A4637 +:105330002946FFF77DFF07B030BD1020FBE70000D6 +:105340007372635C67617474635F636F72652E630D +:10535000000000007372635C67617474635F636F65 +:1053600072652E630000000025020000023000007C +:105370004F030000F3B581B001980C460078082671 +:10538000030016F009F8125E46461B134A0A0A0A81 +:105390000A0A0A0A0A0A0A0A0A5E002C02D1F64917 +:1053A000F64808E06078304360703BE0002CF9D1AB +:1053B000F248F149083015F0CEFEF3E701980022DB +:1053C0008088052187B2384606F0AEFC0546002CE1 +:1053D00004D07520E849C00015F0BDFE002D04D1B1 +:1053E000E648E549143015F0B6FE3946A81D00F030 +:1053F00055FBFCF7B7FA040006D0607830436070C4 +:105400006780FCF790FA0FE01321384603F0DDFFC8 +:1054100015E0DA48D849283002E0D848D6492D307E +:1054200015F099FE002C0AD06078000707D593206C +:1054300020702046582208300199FBF7C5FE002055 +:10544000FEBDCE48CC493130EAE710B500210170ED +:10545000801D00F020FB10BD0A4610B50146901DCE +:1054600000F024FB10BD70B505460022052106F0B2 +:105470005BFC040004D1F920BF49800015F06BFEED +:105480002946A01D00F00AFB70BDF7B5054684B0A3 +:105490000C4600206946088188806F8802460521F5 +:1054A000384606F041FC060004D1FD20B2498000D8 +:1054B00015F051FE002C03D0A7800020E080208151 +:1054C000297A20461230C91E142700900B0015F0CF +:1054D00063FF0FFDFCFB3809A95E657A2FB2C9E9AD +:1054E0009191FB003078012804D0A3497020143139 +:1054F00015F031FEA9896A46C8000E309080302030 +:105500001081002C13D0A18100200DE0C100327960 +:1055100009190A747288CA8182005319DA894A8289 +:105520001A8A401C8A8280B2A1898142EED8F1E0B9 +:1055300002A8009001AB22462946304600F02AFA24 +:10554000E8E03078042804D08B49BD20143115F0F0 +:1055500002FEA8890622014650436A460E3090801A +:1055600033201081002CE2D0A18100200BE0062125 +:1055700041434F190919FA89CA81BA7C8A743A8A57 +:10558000401C0A8280B2A1898142F0D8C2E0307802 +:1055900006280BD078491431D72005E0307806284A +:1055A00004D07549EB20143115F0D5FDE889694622 +:1055B0001230888035200881002CB8D0A989A181BB +:1055C0007188E18126E03078072804D06A49FF20FD +:1055D000143115F0C0FDA8896A4601460E3090804E +:1055E00036201081002CA2D0A1812046AA890E303D +:1055F000296954E0E8896946123080B238228880EF +:105600000A81002C7ED0A989A181287A102807D090 +:105610000221A173E9892182EA89296900983EE083 +:105620000121F6E702A8009001AB22462946304648 +:10563000FFF78AFC6EE03078082805D04E49FF203D +:105640001431EE3015F087FD6846372187800181DF +:10565000002C5FD0A989A1810020608220820120D6 +:10566000A07357E03078092805D04349FF20143152 +:10567000FF3015F070FD288A694614308880372085 +:105680000881002C46D00421A173A989A181E98950 +:105690002182298A618220462A8A1430696915F09C +:1056A000D0FB37E030780A2804D03349344814312D +:1056B00015F051FD6846372187800181002C29D0E3 +:1056C0000521A173002002E01FE004E00DE0A081AD +:1056D000208260821EE002A8009001AB224629468B +:1056E0003046FFF7F4FC15E00CE00D206946392246 +:1056F00088800A81002C05D00120E08000202081D4 +:10570000207307E00699088019E01C481A49A43064 +:1057100015F021FD6846069980880880002C0ED07F +:10572000684600892080684680886080287A03283F +:1057300005D0102803D0112801D00020307000209F +:1057400007B0F0BDF7B5568815460F4682B0002267 +:105750000521304606F0E8FA040004D1074806495E +:10576000C43015F0F8FCA41D33462A46394600948F +:10577000029800F022FBD4E440530000950300009F +:1057800013020000F7B58CB00D46144607A90C981B +:10579000FFF734FD002812D1B64E0127002C0FD0A0 +:1057A0000321684601701021818208A802460690F4 +:1057B000204605A9FDF7BDFA00280BD007207EE59D +:1057C0000821684601708581C68105218774C90258 +:1057D00001820BE00798A178017121884180684619 +:1057E00005218774C90201828581C6810246012193 +:1057F000079B0C98FFF71CFD61E508B501236A467D +:1058000093709D4B13800A4602236946FFF77DFD86 +:1058100008BD08B501236A469370974B5B1C138043 +:105820000A4603236946FFF770FD08BD00B587B03F +:1058300000290CD002236A4613700B889381498893 +:10584000D18100230421FFF7F3FC07B000BD102035 +:10585000FBE710B5002903D00523FFF756FD10BD67 +:10586000072010BD70B588B00D461446064607A93E +:10587000FFF7C4FC00280DD1002C0DD0062168468E +:1058800001708581C481079B02465C8006213046F9 +:10589000FFF7CEFC08B070BD052168460170858118 +:1058A000F1E710B588B000290BD007246B461C70B7 +:1058B0009A81049100236A462146FFF7B9FC08B09B +:1058C00010BD1020FBE770B50024172288B0002916 +:1058D00014D00D782B0015F05FFD06230505190483 +:1058E0001B231522D21E93B2CA88002A02D08E68CA +:1058F000002E03D09A4203D90C20CBE71020C9E731 +:10590000042D05D08A88002A0AD101E00620C1E7CB +:10591000012D11D0022D05D0042D18D0052D23D036 +:105920000720B7E709236A4613704B889381CB8819 +:10593000D381896804911DE00C236A4613704B885B +:105940009381CB88D38189680824049112E00D23C8 +:105950006A4613704B8893818B88D381CB881382DE +:1059600089680924059105E00E236A461370497879 +:1059700011730A2400232146FFF75AFC8AE700B579 +:1059800087B00F236A461370918100231946FFF7F1 +:105990004FFC5AE7FEB50078089D1C4616460F4698 +:1059A000012803D03549912015F0D5FBF889C000B6 +:1059B0000E30208030202880387B001FC0B201903C +:1059C000002E1DD0F889B081002516E0E80084196A +:1059D000C0190090224641690E320198FDF783F903 +:1059E000002802D000202074E08100986D1C008AFD +:1059F00060820098ADB2408AA082B089A842E5D802 +:105A0000FEBD70B514461425049A1D8037231380FB +:105A1000002C0ED0CA89A281002262820078082858 +:105A200008D0092810D00A2819D01449144815F0B4 +:105A300092FB70BD087B0C2804D011480F490C382C +:105A400015F089FB012008E0087B0D2804D00C48E4 +:105A50000A49083815F07FFB0420A07370BD087B4D +:105A60000E2804D006480549001F15F074FB0520D8 +:105A7000F3E70000FFFF000002280000545300007D +:105A8000BB02000010B5FE4B586019721A80C900A5 +:105A900015F036FA10BD00210180704710B50022C4 +:105AA000D2430280032006F0A8FD10BD7047F0B578 +:105AB0000E460446017801208840F24999B008401A +:105AC0000090616815460888EF4A904206D0009A17 +:105AD000002A06D0EB4A521E104202D0012019B013 +:105AE000F0BD009A10430880002D12D000202870CD +:105AF0002178EA1C0027681C01920B0015F04CFC71 +:105B000010F30E16233A59616F3CB4B08AB8F2F123 +:105B1000F0F320780B28EBD00420E0E70221297075 +:105B2000A1890170090A4170032097E004212970BE +:105B3000A1890170090A41700198E1890170090A7F +:105B4000417005208AE006212970A1890170090AA7 +:105B500041700199E2890A70120A4A70218A017122 +:105B6000090A4171A28AE81DA16915F06AF9A08AA3 +:105B7000C01D73E0082129702178082901D1102166 +:105B80002970A1890170090A41700198E1890170A9 +:105B9000090A41700520308020466A1D02A9103094 +:105BA000FDF7C7F800287DD169463088097A40188A +:105BB00054E00A212970A1890170090A417003206B +:105BC0000BE00C212970A1890170090A417001982C +:105BD000E1890170090A4170052030809CE0A089AC +:105BE00084464000401C81B2308888425AD305293F +:105BF00058D30E202870002008E0236942009B5AE9 +:105C0000521953701B0A401C937080B26045F4D344 +:105C10003180B9E09A48417A002973D0491E417217 +:105C2000217B4068C9004518A988286808224018C7 +:105C30000838216915F005F9022168460171002133 +:105C4000417128680390A98868460181002101A854 +:105C5000FFF790FB0020A880002E00D0308093E05A +:105C60002978802211432970297840221143297014 +:105C700029788909890112312970A1890170090ADD +:105C80004170E289E81C216915F0DBF8E089C01C4D +:105C90003080287841063FD5C00975D0012168467B +:105CA000017200E02CE0002141723188091D8181E0 +:105CB0000495E189019808180590001D0690704828 +:105CC000017A68460177002102A8FFF753FB0746D7 +:105CD00030880C303080022F06D0002F54D065E081 +:105CE0003DE033E01CE05EE065486946097F4268BC +:105CF000CB00D218037A994202D29188002902D0AF +:105D0000042753E02FE0417A491C41721560308826 +:105D100090800020308049E06168A089888033E06D +:105D200029788909890116312970A1890170090A28 +:105D300041700198E1890170090A4170228A681D49 +:105D4000616915F07EF8208A401D46E728788009B1 +:105D5000800118302870207B687002207EE7606820 +:105D60000188090401D4052720E0C088A189884260 +:105D700001D006271AE01E202870012030806068BC +:105D800001884904490C0180009800280ED03C4845 +:105D900000220088A1688300032006F087FB616869 +:105DA0002078887007E00020308003276068009921 +:105DB00002888A430280384691E6FFB59FB0289D4D +:105DC0000E46002805D0172803D82A882E4B9A4261 +:105DD00002D1072023B0F0BD3278530601D4D20996 +:105DE00001D00820F6E700226B461A715A7114465A +:105DF0003278431E1D939BB2189303AB1A939706F8 +:105E0000CB1CBF0E1B93821E711C3B0015F0C4FA05 +:105E1000209011EE66EE74EEB0EED4EEEDEEECEE08 +:105E2000EBEEEAEEE9EEEEEEE8EEE7EEE6EEE5EEBC +:105E300090EE05287CD1042168460171A978017291 +:105E4000F078B2780102114368464181317941719D +:105E500070788006800E0C282ED009DC801E03008E +:105E600015F09AFA0919661C6621662466276600F1 +:105E700012282AD00ADC0E2821D01028DAD121E0FD +:105E80004C0C0020FF710000FFFF000016281FD0FF +:105E90001828CFD11FE02878800701E02878400734 +:105EA000002845DA45E128780007F9E72878C00698 +:105EB000F6E728788006F3E728784006F0E72878A8 +:105EC0000006EDE72888C005EAE72888C004E7E770 +:105ED00028888004E4E728884004E1E72A789207CC +:105EE00026D50328A6D105206A461071487809787E +:105EF0000002084310811CE129784907F0D50628E3 +:105F000016D3717890B2012902D0022992D101E012 +:105F1000022100E01021189106216A46117100212A +:105F2000118102AF189AB11C0237921C1B921AE021 +:105F3000B3E04A780B7812021A433A80801E891C1B +:105F40001790BA1C1A911898FCF7CDFE1A99189858 +:105F5000189A091817986B46801A1A8980B2521C31 +:105F60001A811B9ABF1D8242E3D9002886D1E0E046 +:105F700028780007B4D51D98694682B207200871B9 +:105F800000200881701C0A3111E0437807781B0259 +:105F90003B430B80C37887781B023B434B806F46A3 +:105FA0003B89121F5B1C001D92B23B81091D042A14 +:105FB000EBD2002A71D1BCE02978C9066DD5022840 +:105FC0006BD30820694608710020488170780872F8 +:105FD000844692B2B01C1A9919E089E090E07EE004 +:105FE00067E05BE030E025E019E013E0BCE04378D7 +:105FF00007781B023B430B80831C4B606346D21A1D +:106000006F467B8960445B1C92B27B81083194456A +:10601000EDD9CEE7287880063FD5092203E028781D +:1060200040063AD50A2268460271AA880281189A67 +:10603000428107E0287800062FD50B206A461071B0 +:1060400018981081039174E02988C90525D5022884 +:1060500023D30C20694608710020488170780872AB +:10606000844692B2B01C1A9914E0437807781B0258 +:106070003B430B80C37887781B023B434B80031D57 +:106080004B606346D21A6F467B8960445B1C92B2B8 +:106090007B8108319445E8D98BE763E02988C904FE +:1060A00060D501285ED10D2168460171A988018162 +:1060B0003FE02988890455D5052853D30E22694627 +:1060C0000A71AA880A811B99401F4A78097812022E +:1060D0000A4369464A818881701D049029E0298815 +:1060E00049043FD501283DD10F206946087120E0C1 +:1060F0002A88120436D44A780B7812021A43EA80AE +:1061000003282FD332789206920E1B2A26D0112212 +:106110006B461A712A880123DB031A432A804A78C6 +:10612000097812020A4369460A81C01E48811B98F9 +:10613000039030788006800E1B2809D01D2807D0D8 +:106140000320229906F059FA2888C00BC003288042 +:1061500001A82199FFF70EF920463BE610226B4675 +:106160001A71DCE70724F7E70824F5E700B597B0D4 +:10617000032806D16A461070019100216846FFF796 +:10618000F9F817B000BD000010B58B78002B11D0C6 +:1061900082789A4207D10B88002B0BD003E08B79D1 +:1061A000091D002B08D08B789A42F8D103880C88FF +:1061B000A342F4D1002010BD812010BD052826D0B7 +:1061C000002A02D0012A0DD102E00988090501E068 +:1061D00009888904890F07D0012918D0022909D01C +:1061E00003290ED081207047002A01D00320704778 +:1061F0000220704703280AD0042808D0002804D0C1 +:1062000007E0042803D0022803D0052070470020AF +:1062100070470F20704770B51388054614460B80F1 +:1062200018061DD5FE481022807AA84203D81343D1 +:106230000B80002070BDA06893430078E840C00741 +:10624000C00E03430B802078A1788007800D08439F +:10625000F44914F05FFEA06869430818401C70BD43 +:10626000906870BD37B569468B88138019061BD5B9 +:10627000EB4C0125A47A9168844209D8FE280FD1FD +:10628000D80602D5A5406D1E00E000250D7007E080 +:1062900085400C78DB06DB0FAC4383401C430C705D +:1062A00010881021884310803EBDF8B50746C81CF1 +:1062B00080080E468000B04201D08620F8BD082A32 +:1062C00001D90E20F8BDD64D00202E60AF80288168 +:1062D000AA723446E88016E0E988491CE980810604 +:1062E00010D48007A178800D0843CE4914F012FE27 +:1062F000206800F0BAFA2989401880B22881381A3B +:106300008019A0600C3420884107E5D40020F8BD36 +:10631000FFB589B09F041646139DBF0C01930998E1 +:1063200000F095FA04000AD02078000609D5BC4890 +:10633000817A0A98814204D887200DB0F0BD0120EF +:10634000FBE7224669460A98FFF765FF06900020A2 +:1063500069460872052D14D0012221462846FFF710 +:106360002DFF0028E9D1207840060AD50221684691 +:106370000172099981810188C18106824782129840 +:1063800005900198000404D500273E460125079793 +:1063900009E02078A1788007800D0843A149079083 +:1063A00014F0B8FD0D46019840040AD50798A8429C +:1063B00007D12088E1788005800F00020843B042B1 +:1063C00001D3AE4201D90720B7E7B81980B20190D6 +:1063D000A84201D90D20B0E76846007A002804D011 +:1063E00002A8FDF718F90028A7D10798A8420BD1F9 +:1063F000208803210902884301998905890F090230 +:10640000084320800198E0701498002800D007808D +:106410001298002815D006983A468019129914F05F +:1064200010FD224669460A98FFF7F5FE694608887E +:106430001021884369460880224600990A98FFF790 +:1064400011FF002079E7FFB5754D0C22E888296817 +:10645000504383B00C180D9F7249059814F05AFDF3 +:106460000091049800F001FA29682A898E46611A81 +:106470000C310918944651188AB2A988914202D861 +:10648000842007B0F0BD6A46168A320603D5B206EC +:1064900001D58520F5E7EA88521C92B2EA800E9B6E +:1064A000002B00D01A80B20601D5A76006E0604438 +:1064B00080B22881091A70460818A0602246FE2082 +:1064C0000499FFF7CFFE0598A0700098E07020882F +:1064D0000599800889058000890F08430321090276 +:1064E000884300998905890F09020843042108435C +:1064F000208003988078A07103980088A0800020F5 +:106500002073310601D5AC7A00E00124B10600D534 +:10651000002700260EE0052100200191029000973F +:10652000E88831460C9B069AFFF7F2FE0028A8D1B6 +:10653000761CF6B2A642EED30020A2E7F1B5009891 +:1065400000F085F9060002D00025009C14E001202F +:10655000F8BD204600F07BF90746007831498007F6 +:10656000820DB878104314F0D5FC386800F07DF93E +:106570004019641C85B2A4B22948C188601E8142BA +:10658000E7DC00992648491EC1800189491B018129 +:1065900000203070F8BD002804D0401E108091709B +:1065A000002070470120704710B5044601881C4840 +:1065B000C288914201D3822010BD00680C22514351 +:1065C00042189079A072908820811088D178800537 +:1065D000800F00020843A081A078211DFFF71BFE59 +:1065E00020612088401C2080E080002010BD012117 +:1065F00001827047F7B50546002084B0C043108083 +:1066000068681746817868468170686801886846BE +:10661000018000218171288A2C88A04205D303E0E3 +:10662000580C00200102000004462C8235E0288A24 +:10663000401C2882301D6968FFF7A6FD00282AD17A +:1066400039889248814201D1601E38806888A04212 +:1066500028D33088F1788005800F0002084302902B +:106660006946301DFFF790FD002814D169898748DD +:1066700081421BD0002231460598FFF79FFD00287C +:1066800009D16A890298824205D1E968B06814F09C +:10669000ABFB00280AD0641CA4B2204600F0D7F857 +:1066A0000600C4D1641E2C828220EAE67C80B07988 +:1066B000B871B088B8803078B1788007800D084311 +:1066C00078810298B8813946287A32460831FFF736 +:1066D000A2FD38610020D4E6FFB585B01C460F4608 +:1066E000059800F0B4F8050009D02878000608D510 +:1066F0006748807AB84204D8872009B0F0BD0120ED +:10670000FBE707982A468605B60D69463846FFF727 +:1067100082FD07460E98052816D000222946FFF76D +:106720004DFD0028E9D1287840060DD501216846A5 +:10673000017105990181018841818681C48101A887 +:10674000FCF769FF0028D8D12888AA788107890D2D +:1067500011438005800FEA7800021043079A9642A1 +:1067600007D04C4A914204D3611E814201DD0B20C7 +:10677000C3E7864201D90720BFE7801B82B2A2424D +:1067800000D922461098002800D002800F980028D7 +:1067900002D0B91914F055FB0020AEE7F8B51D463C +:1067A00017460E4600F053F8040008D02078000683 +:1067B00007D53748807AB04203D88720F8BD01203A +:1067C000F8BD224639463046FFF725FD002D0BD097 +:1067D0002078A1788007800D08432E49884201D295 +:1067E000012000E0002028700020F8BDF8B51E460A +:1067F00017460D4600F02BF8040008D0207800065C +:1068000007D52348807AA84203D88720F8BD012005 +:10681000F8BD224639462846FFF724FDFF2E14D046 +:106820002588A178A807800D08431A4914F072FB47 +:10683000002E03D1FF31FF31033189B2A170A808C6 +:1068400080008905890F084320800020F8BD104989 +:10685000CA88824207D3002805D00C220968504319 +:106860000C38081870470020704703B50846694681 +:1068700009888A0607D4090604D50549897A41435F +:10688000491C88B20CBD00200CBD0000FFFF0000B9 +:10689000580C002001020000F8B507780D460446A8 +:1068A000012F19D0072F02D00C2F19D114E0A068A6 +:1068B000216906780B2E0BD0052005F09EFE052ED3 +:1068C0000ED0782300220520216905F0EFFD07E0B6 +:1068D000782300220620F8E70520216905F08DFEC7 +:1068E000002D0ED0002028702946204603F0E2F942 +:1068F000FE482978C05D884201D10320F8BD0220FE +:10690000F8BD0021204603F0D5F90020F8BD70B590 +:106910000E460C462036317901208AB015460029F2 +:1069200009D0012905D12978042902D10520107048 +:1069300000200AB070BD6068019005A802900D218A +:10694000C01C14F0DBFA032205A8A16814F079FA40 +:1069500001203071062069460870206A049029469B +:106960006846FFF799FFE4E770B50C4615462031FD +:106970000A790120062686B0002A2CD0012A28D1C7 +:106980002978042925D169681022A06801F0B5F999 +:106990006868C07B000606D5D44AA0681023103A68 +:1069A000014601F09FF91022A168E06801F0A5F905 +:1069B000A068C07B000606D5CC4AE0681023103AD8 +:1069C000014601F08FF92E70A0686860E068A86049 +:1069D000002006B070BD60680190C4482038029065 +:1069E0000120087168460670206A049029466846AE +:1069F000FFF752FFEDE7027B032A06D00022242393 +:106A00005A540B78092B02D003E0042070470A7611 +:106A1000CA61027B9300521C0273C150032070476D +:106A2000F0B50E4615460C46203602463179012057 +:106A3000072393B000290CD0012924D002292ED09D +:106A4000032904D12978042901D12B70002013B027 +:106A5000F0BD01203071606800280DD0A1690B7075 +:106A600060684860206988606069C860206A086260 +:106A70001046FFF7C0FFEAE706202870206968602B +:106A80006069A86009E029780629E0D10220307108 +:106A9000042028709548203868600320D7E72978BB +:106AA0000429D4D1A08910280AD9103880B2A08135 +:106AB000A1681023091805A86A6801F013F923E0FA +:106AC00010282FD0C2B21020801AA1680DAF1190EB +:106AD000C01914F0B6F911980006000E06D0401E39 +:106AE000C1B280207854384614F008FA6269102345 +:106AF0000DA909A801F0F6F8102309A905A86A68EC +:106B000001F0F0F8032030716068019005A8029050 +:106B1000062069460870206A049029466846FFF7F7 +:106B2000BBFE94E710232269A168E2E7F0B50E46A8 +:106B30000C4620363179012006278FB015460029F2 +:106B40000BD0012932D0022905D12978042902D19C +:106B50000820107000200FB0F0BD217D08A8CA07E2 +:106B6000D20F02718807C10F08A801716846027030 +:106B700041700722801CE16814F063F902A8072223 +:106B80000130216914F05DF9606805900AA806904B +:106B900010236A46A16801F0A5F80120307168460B +:106BA0000774206A0890294604A820E0297804295F +:106BB000D1D1062205A8E16914F043F906A80622FE +:106BC0000230A16914F03DF900200890606801903E +:106BD00009A80290102305AA696801F083F8022031 +:106BE000307168460770206A049029466846FFF7AE +:106BF00053FEB0E770B50D460C46203529790120CB +:106C00008CB01646002909D0012905D13178042914 +:106C100002D10920107000200CB070BD6068019096 +:106C200006A802900822E16814F00BF9082208A8CF +:106C3000A16814F006F90120287106206946087041 +:106C4000206A049031466846FFF726FEE4E770B5F7 +:106C50000D460C462035297901208CB016460029B6 +:106C600008D00129D8D131780429D5D10A20107053 +:106C70000020D1E76068019006A802900822A16870 +:106C800014F0DFF8002008900990012028710620F8 +:106C900069460870206A049031466846FFF7FCFD9B +:106CA000BAE730B50B4620331C7901208BB0002C9D +:106CB00009D0012C05D11178042902D10B201070C4 +:106CC00000200BB030BD4868019005A802908C6888 +:106CD00068462578057564784475CC68257885758F +:106CE0006478C47500200690079001E0E4B30100C9 +:106CF000089001201871062368460370086A049002 +:106D000011466846FFF7C8FDDBE770B50C46203436 +:106D1000034625790120002D0AD0012D14D0022D23 +:106D200005D111780A2902D10C201070002070BD05 +:106D300001202071C868052202704A684260F84A42 +:106D40008260921CC2600BE015780B2DEFD10220FF +:106D50002071C86804240470526842608A688260A6 +:106D6000096A016201461846FFF745FE70BD30B55D +:106D7000011D02463132947803258379ED432C437B +:106D800023408371DB070DD04B79547923404B713D +:106D90000B79127913400B718278C9788A4200D935 +:106DA000817030BD00224A710A71F5E7F7B50C46D3 +:106DB00086B00020694626460870203631790127C2 +:106DC0001E2015461F2977D24B007B449B885B0011 +:106DD0009F441E0017023E025602690288029A0270 +:106DE000D102F5022E03590371037F03AE03C303DF +:106DF000CC03F7031A0464049A04AB04DF04FE0412 +:106E000010052A0565059B05C605830587058B05C5 +:106E10006069002802D0007813287DD0A068059012 +:106E2000002849D0012168460170206A049003219E +:106E3000684601710A214171E069029020790028B9 +:106E4000EFD0059909780029E7D00C2964D20B000E +:106E500014F0A2FA0CFD1A4B90B5E8FCFBFAF9F815 +:106E600007FD022828D16069002802D00078082890 +:106E700052D1022168460170206A04900598417839 +:106E8000684601710021B9E20620216A05F0B5FBD0 +:106E900020790728E6D1606900F051FF02280CD064 +:106EA000606900F04CFF042807D060690028B8D062 +:106EB00000780128D6D103E01BE261690120087047 +:106EC00005980079C11F0A2901D30A2050E06169A1 +:106ED0000722887060690599303013F0B2FF0120F5 +:106EE000307161690320087034E00728BAD1606905 +:106EF000002896D001780929B4D10599C978890765 +:106F000007D1059949790029DFD1059989790029A7 +:106F1000DBD105994A7900E04EE2014620314B7DF4 +:106F20009A43D2D1059A8B7D92799A43CDD1059A15 +:106F30001279D31F0A2BC8D20979914236D8072279 +:106F4000C01C059913F07DFF0120307161690A2092 +:106F50000870032069460870206A04906069313027 +:106F600001906069001D029060691C300390A1E2ED +:106F70002076F2E311288DD1606900F0E0FE04284C +:106F800004D0606900F0DBFE0B2893D1606905999D +:106F900010223730491C13F054FF6069017804292E +:106FA0007CD12421095C8278914201D90620DFE757 +:106FB000052101700320307168460170E2E3112859 +:106FC00094D1606900F0BBFE062804D0606900F02F +:106FD000B6FE0C288AD1E068002813D0206900286A +:106FE00010D060690178062910D00D210170606908 +:106FF000059910225730491C13F023FF6069573060 +:1070000009218CE100206946087072E107210170B6 +:107010006069059910224730491C13F012FF60691E +:107020004730EDE70228F0D1606900F088FE0028C3 +:10703000EBD0606900F083FE0128E6D0606900F0C3 +:107040007EFE05E0B1E08DE06CE02AE00AE0D6E0EB +:107050000828DAD00521684601710598417868460C +:10706000417146E11128D0D160690028CDD0017866 +:107070000E29CAD1C16A4078022810D000201422FB +:1070800050431430085805991022491C13F0D9FEBA +:107090000520216A00F041FE0F205EE0F1E10120B1 +:1070A000EDE70B28B1D160690028AED001780F2937 +:1070B000ABD1C16A4078022826D000201422504368 +:1070C0000C300958059842780A70807848706069D9 +:1070D000C16A4078022819D0002014225043103091 +:1070E000085805990822C91C13F0ABFE0520216A37 +:1070F00000F013FE60694178022909D000220832AD +:10710000825C5208520073E00120D7E70120E4E7D7 +:107110000122F4E7012100E0002108314254BCE3E0 +:10712000BEB3010011289CD16069002899D0017874 +:10713000102996D1C16A4078022811D0002014226B +:1071400050431830085805991022491C13F079FE55 +:107150000520216A00F0E1FD112061690870B4E3A7 +:107160000120ECE7082884D1606900289DD00178CF +:10717000112997D10599C06A49780170606905990C +:10718000C06A0622401C891C13F05BFE0520216AA0 +:1071900000F0C3FD60694178022904D00022083262 +:1071A000825CFD2323E00122F9E71128BBD160694D +:1071B0000028BBD001781229B5D1C16A40780228D5 +:1071C00019D00020142250431C3008580599102271 +:1071D000491C13F036FE0520216A00F09EFD60690F +:1071E0004178022909D000220832825CFB231A4030 +:1071F000022991D18EE70120E4E70122F4E707207C +:10720000B6E6287801288ED16069696814221C309E +:10721000F9F7DAFF6069017F002901D02176ACE33C +:107220000178032901D0032037E00227C770817954 +:107230004907490F8171017A4907490F0172417A63 +:107240004907490F41726069FFF791FD377196E276 +:1072500028780F28E3D1072069460870216A049135 +:10726000916802916946087161690722C91C0298F8 +:1072700013F0E7FD61690420087000203071BBE065 +:1072800028780328CBD1606901780529696807D07F +:107290000822473013F0D5FD0420307105206FE23D +:1072A00008225730F6E728780328B8D160690178BA +:1072B0000529696811D008224F3013F0C2FD05205E +:1072C00030716069006A00280AD00220287000200E +:1072D00028716069006AA860F9E008225F30ECE775 +:1072E00004204DE22878022899D12879002801D07D +:1072F000207642E36069A96801626069002901D1D2 +:10730000F949016206200BE228780F2887D1A86886 +:10731000E0616069017805292BD047300721317180 +:10732000E16802220A706269126A4A6088606069D4 +:107330003030C8606069C01C08616269087D926A6B +:10734000400812784000D207D20F104308756269D6 +:10735000926A521C8A61FD2210406269D26A1278D8 +:10736000D207920F104308756069C06A401CC8615B +:1073700053E25730D2E728780828BAD160690178FB +:1073800005291AD00B210170072069460870206A70 +:107390000490E069029011200871029803210170A5 +:1073A00051681022401C13F04CFD00216846FFF785 +:1073B00073FA00203071E06187E20621E3E7287864 +:1073C0000F2896D1072069460870206A0490A868A3 +:1073D00002901120087102980421017061690A78F5 +:1073E000072A0ED0002232710C220A706169102225 +:1073F000401C473113F025FD00216846FFF74CFA89 +:1074000063E21022401C573113F01BFD0021684637 +:10741000FFF742FA0A203071E168032008706069C2 +:10742000006A486060695730886060694730F3E1FE +:1074300028780828A1D1606969681022373013F0D4 +:10744000D3FC002801D0042092E560690078072869 +:1074500017D00A203071E168032008706069006A63 +:10746000486060695730886060694730C860206A4A +:1074700008620698FFF7BFFA07466069FFF777FCD6 +:107480006BE208207AE1287809289AD10B20307124 +:1074900061696868897810224018511A13F02EFD2E +:1074A000082069460870206A049068680190606945 +:1074B0008078087268E129780D29BBD161698979E2 +:1074C000C90703D00C20307109203EE0307103273A +:1074D00070E228780E28ADD160691422291D1C3075 +:1074E000F9F772FE6069018DC06A4172090A817202 +:1074F00060698178C06AC1716169CA6A081D117AC0 +:10750000C909C90111724379626919438378D26A42 +:107510009B079B0F012B00D0002300799B01C0002B +:1075200003431943117260694078012876D0B4E1B1 +:1075300060694178022901D0012100E00021083171 +:10754000405CC00707D00E20EAE069460870206A58 +:107550001146049019E11320B8E728780F2894D138 +:10756000A868E0610F2030710520EEE72878032835 +:107570008BD16069C16A4078022801D0012000E007 +:10758000002014225043103008580822696813F074 +:1075900058FC10203071E16806202269087060698B +:1075A000406A48606069C36A4078022801D00120BF +:1075B00000E000201427784310301858CA60886013 +:1075C0002BE128780C2886D16069C26A40780228AD +:1075D00001D0012000E00020142148430C30105855 +:1075E00002230932696800F07DFB11203071E168E7 +:1075F000052008706069006A48606069C06A0930E7 +:1076000088603948001F07E128780B28A7D16169F5 +:107610004878CA6A022802D0012001E059E100201E +:1076200014235843143010588A78696813F009FC01 +:1076300060694178C26A022901D0012100E000217D +:107640001423594314315258817850181022511A7A +:1076500013F054FC072069460870206A0490E06922 +:107660000290112008710298062101706169CA6AAE +:107670004978022901D0012100E000211423594357 +:10768000143151581022401C13F0DBFB00216846D6 +:10769000FFF702F90020E06112206FE028780F2840 +:1076A00091D1072168460170206A04909068029089 +:1076B0000B2268460271029801706169CA6A4978B2 +:1076C000022901D0012100E00021142359430C318B +:1076D00051580A784270497881706169CA6A49785C +:1076E000022903D0012102E0C4B3010000211423C8 +:1076F0005943103151580822C01C13F0A2FB00213D +:107700006846FFF7C9F826E760694178022901D089 +:10771000012100E000210831405C800703D51420DE +:1077200030710A2011E71620D0E628780F287AD188 +:10773000A868E061072069460870206A0490E06943 +:107740000290112008710298082101706169CA6ACB +:107750004978022902D0012101E011E1002114231E +:107760005943183151581022401C13F06AFB002174 +:107770006846FFF791F80020E061152030710A207B +:1077800069460870206A049029466846FFF784F825 +:107790002BE028780F2846D1072069460870206A18 +:1077A00004909068029008200871029809210170E5 +:1077B00061690622C969097841706169801CC969DB +:1077C000491C13F03EFB00216846FFF765F8AAE765 +:1077D00060694178022901D0012200E000220832CC +:1077E000805C400703D51720C8E70746B5E00129AC +:1077F00053D070E028780F2815D1A868E0611820D0 +:107800003071E168052008706069006A486060694D +:10781000C06A09308860F848C860206A0862069823 +:10782000FFF7E9F8E1E76FE028780B286CD1606991 +:10783000C16A4078022801D0012000E00020142213 +:1078400050431C3008581022696813F0FAFA0720D8 +:1078500069460870206A0490E0690290112008715E +:1078600002980A2101706169CA6A4978022901D027 +:10787000012100E00021142359431C3151581022EA +:10788000401C13F0DEFA00216846FFF705F80020DF +:10789000E0616069407801281DD1192016E6606911 +:1078A0004278022A09D000210831411809780029BC +:1078B0000DD0CA0703D00E2106E00121F4E78907A5 +:1078C00001D5102100E012210170002772E0012A89 +:1078D00001D00D20FAE51C20F8E51D2030710B20A9 +:1078E00033E62978102948D1F0E56069017801294B +:1078F00043D0082941D00021317100F01AFA0C2040 +:1079000069460870206A049037E028780F2805D06F +:107910001020107003271B2030714BE007216846B0 +:107920000170206A0490A8680290022168460171E3 +:10793000029805210170217E417000216846FEF702 +:10794000ABFF0B2168460170206A04902946684607 +:10795000FEF7A2FF07461B203071012F0DD029E052 +:10796000012168460170206A049004216846017173 +:10797000217E41710020207612E0207E00280FD069 +:107980006169132008701A2030710A206946087056 +:10799000206A049029466846FEF77EFF074609E004 +:1079A0006069002801D01421017068460078002821 +:1079B00000D021E5384609B0F0BDF7B50F462037B5 +:1079C0003879012686B00C46002804D0012828D03A +:1079D00002281CD197E02079012804D0022811D078 +:1079E000032814D10AE0A068407801280ED10620AF +:1079F000216A04F0DCFD00287FD10CE0A16813208F +:107A0000087008E0A0684178022901D0052674E0DA +:107A10000078082871D1012038710A206946087061 +:107A200033E0089800780F2867D107216846017075 +:107A3000206A049008988568029522790220012A1C +:107A400004D0022A29D0032A57D10FE006466846FF +:107A500006710B202870207B00214007400F6870C2 +:107A60006846FEF719FFA068067045E006466846BE +:107A7000067105202870207B687000216846FEF79B +:107A80000BFF3E710B2168460170206A0490684626 +:107A90000899FEF701FF06462FE0684601710120B4 +:107AA0002870207C6870607CC007C00FA870A07C24 +:107AB0004007400FE870E17C2971C0071FD0207D8E +:107AC0004007400F6871607D4007400FA87100219A +:107AD0006846FEF7E1FEA06807222946303013F021 +:107AE000B0F9E068017AA06820300171A1682879B6 +:107AF0008870A16809200870002630465BE70020E6 +:107B0000A8716871E3E7A168142008700121684634 +:107B10000170206A0490042168460171217B417143 +:107B20000021FEF7B9FEE7E7F0B585B00F46054640 +:107B30000124287B800040198038C66F3078411EB0 +:107B40000A290AD22C498000323140188038C36F8C +:107B50003A463146284698470446002C01D0012C6D +:107B600011D1287B401E0006000E287301D003248B +:107B7000DFE70D2069460870306A04900021019605 +:107B80006846FEF789FE032CD3D0204605B0F0BD31 +:107B900070B515460A46044629461046FFF7C4FF4D +:107BA0000646002C0FD0207814280CD1207E002807 +:107BB00006D000202870204629460C30FFF7B4FF7D +:107BC000204600F0B6F8304670BD704710B5012968 +:107BD00003D0022901D0052010BD417000F0A9F8A2 +:107BE000002010BD002809D0027E002A06D00A46D7 +:107BF00001460C31CCE70000C2B301000120704700 +:107C000030B5044687B00D46062004F0F6FC294640 +:107C1000052004F0F2FC2078142805D000206946E5 +:107C200008702046FFF7DEFF07B030BD7FB50E4677 +:107C300000216A4611730178092903D00A2903D06B +:107C4000002407E0446900E08468002C02D0217E13 +:107C5000002912D0154601462846FEF7CCFE03281F +:107C600009D1324629462046FFF792FF6946097B33 +:107C7000002900D0042004B070BD25460C35EAE789 +:107C800000B50023012285B005280CD0062808D1B4 +:107C90006846027004910221017143710021FEF7D0 +:107CA000FBFD05B000BD6846027004910271F4E767 +:107CB00010B590B00C4605216B4619700190234811 +:107CC00002900892001D03900AA96846FFF7AEFFD4 +:107CD000002805D1102220460B9913F0B2F800209D +:107CE00010B010BD30B505E05B1EDBB2CC5CD55CDE +:107CF0006C40C454002BF7D130BD10B5002409E00E +:107D00000B78521E5B00234303700B78401CDC0988 +:107D1000D2B2491C002AF3D110BD70B50C460546FD +:107D200004F06BFC782300222146284604F0BEFBB9 +:107D300070BD4178012900D00821017070470028EA +:107D400001D000787047082070470000BCB30100E4 +:107D500070B5F84D040008D0012C10D0022C07D0CB +:107D6000032C05D0F4A1752007E0F3A16C2004E0FA +:107D70002878012803D0F0A1722013F0ECF92C70C0 +:107D800070BD70B5EB4D044610280AD0112C16D0EA +:107D900028468178122C07D0132C0AD0E6A1A42003 +:107DA0000BE0E5A1992008E0112908D0E2A19E206E +:107DB00003E0112903D0E0A1A12013F0CCF9AC70AD +:107DC00070BD10B5DB4894B0007B002819D0172097 +:107DD00069460870D74900A806220D31023013F019 +:107DE00030F809A9684603F0A8FE0446112805D01A +:107DF000002C03D0D0A1C02013F0ADF9204614B060 +:107E000010BD3220E4E710B50022022103F08CFF00 +:107E100010BDFFB595B01D460E460746FFF7F3FFB0 +:107E200004000AD02078222804D3A07F8006C00F47 +:107E3000A84204D1082019B0F0BDC348FBE73721A0 +:107E4000684601704780002D05D0012101714671FF +:107E50001799817102E000206946087109A96846F6 +:107E600003F06BFEA07FDF21084069010843A07783 +:107E70000020E0E770B50446084620380D460300B0 +:107E800013F08AFA0A060A11232C3342495057612B +:107E9000FF20A9A10D3052E02078202851D1FF20E9 +:107EA000A5A110304BE0A3480178032949D0807880 +:107EB000132846D02078242843D0252841D02328D1 +:107EC0003FD0FF209CA1133039E02078222838D001 +:107ED000232836D8FF2098A11A3030E020782228B5 +:107EE0002FD0FF2094A11E3029E02078222828D00E +:107EF000242826D0262824D0272822D0292820D07C +:107F0000FF208DA121301AE02078252819D0FF20EC +:107F100089A1283013E02078252812D0FF2086A1DF +:107F20002B300CE0207825280BD0FF2082A12E30AA +:107F300005E02078282804D0FF207FA1313013F0FD +:107F40000AF9257070BDFF207BA13430F7E730B50A +:107F50007E4C0B887E4A022801D0934204D09D1F9C +:107F6000A54225D2022802D04D88954203D04D88E3 +:107F7000AD1FA5421CD24C88A34219D88B88FF257F +:107F8000F435AB4214D8022802D0C888904205D0FC +:107F9000C8886E4D0A382D1FA84209D2C888904261 +:107FA00008D0944206D05B1C63438000834201DB0F +:107FB000072030BD002030BDF0B56649884245D36A +:107FC000654A0125AD041368A84201D398423DD308 +:107FD0000279002A06D0082A02D8067B082E05D985 +:107FE0000720F0BD047B002CFAD0F6E7002A06D06B +:107FF00004688C422AD3AC4201D39C4226D3002E83 +:1080000006D084688C4221D3AC4201D39C421DD35C +:1080100000240CE00568A700ED598D4216D3012716 +:10802000BF04BD4201D39D4210D3641CE4B2A242FE +:10803000F0D800220125AD040CE084689700E459D3 +:108040008C4203D3AC4203D39C4201D21020F0BD3A +:10805000521CD2B29642F0D80020F0BD10B5028971 +:108060003E4B111F994213D24189042910D3DB1CC6 +:1080700099420DD891420BD80178890706D54068FE +:10808000002803D0FFF798FF002800D1002010BD82 +:10809000072010BDFFB50022099B002802D099429D +:1080A00005DC6EE0002902D1002004B0F0BD0920FB +:1080B000FBE7845C002C12D087187D78112D59D0F5 +:1080C00010DC2B0013F068F90A561726262C2C2EEC +:1080D0002E4C4C56835C002B46D1521CD2B28A42A5 +:1080E000F8DBE1E71C2D45DA123D2B0013F054F9C3 +:1080F000044242121A42022CD9D1BB78039C072BAE +:10810000237001D25B0701D40A20CEE7029B012431 +:108110001B782CE0E343DB0708E0012C08D029E0C2 +:108120000620C2E70F2523072D075B19002BF4D08B +:108130003046BAE7640C00207372635C6761705F5D +:10814000636F72652E630000023000007B0C00003C +:10815000FFFF000000C0010028000020FD3F0000DC +:10816000029B1B789C0701D50B209EE7022423432A +:10817000029C2370835C521C9A18D2B28A4202DDA0 +:1081800095E7192676028A4293DB8DE710B50478CD +:108190000B46002C08D00121F94A012C07D0022CF3 +:1081A0000BD0032C13D10EE00021197011E01970CF +:1081B0008179890903290AD10BE01970817989092C +:1081C000012904D105E019708179890901D010468F +:1081D00010BD411C0622581C12F033FE002010BDB9 +:1081E00008B51346002806D0E6A00068009048793C +:1081F0006A468009105C18700622581C12F021FE95 +:1082000008BD30B50C46097895B0222902D2082065 +:1082100015B030BD282369460B704880132A03D05F +:108220003B2A01D00720F3E708460A7109A903F0A9 +:1082300084FC050003D121212046FFF71BFE2846C0 +:10824000E6E700B595B0232369460B704880108897 +:1082500088805088C880D088488190880881002014 +:108260008881C88109A9684603F067FC15B000BD84 +:1082700070B50C00064610D0FFF7C5FD050003D110 +:10828000C149C24812F067FFA6802889E08028898A +:10829000208168896081A889A08170BD70B50E4673 +:1082A000050003D00021092004F0A7F90120B84CF3 +:1082B000022E207324D0032E04D0D320B249800094 +:1082C00012F049FFB24806210D3003F02DFFA07CCB +:1082D0008006800EA074FFF774FDA08B00280ED0DE +:1082E000002D0CD0830001220021092004F0DEF8CB +:1082F000092804D0A548A449283012F02CFF70BDED +:10830000A3480321103003F00FFFA07C402180061A +:10831000800E0843A0749E480C3002F04EFBDAE752 +:108320007FB501A9022003F06EFD002851D09748C7 +:108330009549673012F00FFF4BE0029C207821280E +:1083400047D0A07F01072BD52046223000906846F9 +:108350002346628E80882146343301F084FC050078 +:1083600005D011282ED089488749843028E0A07F85 +:10837000F7210840A077E17F480889074000C90F2E +:1083800008432021095D4007400FC9000843E077FA +:108390002078282824D129212046FFF76BFD1FE0F3 +:1083A000400716D568462246808821460E32FFF7E0 +:1083B00048FF050008D0112804D074487249933052 +:1083C00012F0C9FE00250BE0A07FFB210840A0773A +:1083D00006E001A803F025FD0500AED0052D02D072 +:1083E000284604B070BD0020FBE7F8B5040004D1B6 +:1083F00066486549A13012F0AEFE722020706068B8 +:1084000008260178091F0B0012F0C6FF11FD0A466D +:1084100068FC460EFCFC4746464646FD92FD46007B +:108420007B205949C00035E087883846FFF7EBFCD0 +:10843000050004D11F205449400112F08CFE6078E1 +:10844000042130436070524CA07F0843A077212163 +:108450002846FFF70FFDA87F8007800F012801D174 +:10846000801EA080384603F0B1F83846FCF7FBFFC9 +:108470003846FBF79EFB3946022004F0BEF8A87F81 +:10848000EF210840A877FFF74BFF002804D03F48B2 +:108490003D49C93012F05FFEF8BD85882846FFF7D8 +:1084A000B2FC002804D139483749D33012F053FECA +:1084B00060688078012804D034483349D53012F000 +:1084C0004AFE60688179284603F09CF90028E3D0D1 +:1084D0006178314361706168C880F8BD878838462B +:1084E000FFF791FC050004D128482749E63012F037 +:1084F00032FE60783946304360706068C0882881F9 +:1085000060680089688160684089A881022004F061 +:1085100074F80020A875A87F8007800F0228DCD19E +:10852000FFF7FEFE0028D8D0212017494001B1E70F +:1085300080783C2803D00025022814D000E00125D3 +:108540000027002808D03C2806D0022804D00F4875 +:108550000D49FF3012F0FFFD002F06D002263046F5 +:1085600001F06CF9F8BD0127EBE7607830436070EB +:108570000748817F31438177002D0BD00126EEE73C +:10858000023200000302FF01388100002E030000C8 +:10859000640C002060688788384601F07BF9054646 +:1085A00060688079012832D00226A87F06228008E0 +:1085B00080003043A8776068C08A28816068008B9B +:1085C00068816068408BA8816068C079E8756168DF +:1085D00028461830083112F034FC60680622807B8F +:1085E00068706168A81C0F3112F02BFCA87F81070E +:1085F000890F384602F0D4FFA87F8007800F01283A +:10860000ADD101E005E008E0FE488780A7E701263C +:10861000CBE7204601F01EFEF8BD60783043607065 +:10862000F8BDF7B505460078002700090C463E4620 +:1086300001287DD00022F44902287AD0072804D0EE +:108640000A2877D0F149F24839E1686803780D2BA0 +:1086500035D006DC042B6ED0072B3AD00A2B69D11B +:1086600006E0122B3CD0132B44D0142BF7D1BEE0E4 +:1086700011270726002C7CD08088A0806968FB2306 +:108680008979A171DF4905468A7F1A408A770421DA +:1086900003F071FB0521284603F06DFB00212846FD +:1086A00003F069FB0121284603F065FB03212846FE +:1086B00003F061FB0221284603F05DFB01E1012785 +:1086C0000926002CD7D08088A08068688079207225 +:1086D000F7E012270E2680882146FFF7C9FDF0E05B +:1086E0001A270726002CC6D04088A0806868007929 +:1086F000A071E6E081783C293ED010271E26002C90 +:10870000B9D08088A0806868C08A20836868C08AE1 +:10871000E0826868008B60836868408BA08369682A +:10872000607D497F40084000C907C90F084303E046 +:108730006CE097E0BAE029E060756968C007497F9E +:10874000C00F49084900084360756968A21DC879CF +:108750000831FFF745FD69682246887B0D320F31ED +:10876000FFF73EFD68688079002803D0012020755E +:1087700007E076E00220FAE719270726002C70D0E0 +:10878000A271A048F722817F11407DE01B272E2691 +:10879000002C66D0A1806968A21D0879491DFFF7E9 +:1087A0001FFD68682030C07A60736868C07804284C +:1087B000A07B19D040084000A073F92108406968E7 +:1087C0001F22C9788907490F0843A07369684007C9 +:1087D000C97A400FC9000843A073696820460F306A +:1087E0000C3112F02EFB6CE001210843E4E71E2758 +:1087F0000E26002C6DD0A1806868E21D407AA07121 +:1088000069688878C91CFFF7EBFC5AE0287A0128D0 +:1088100005D0022815D07E487C4932384FE01D270C +:108820000E26002C55D06888A080A889E080E889B1 +:108830002081288A6081688AA0817248DF22817F36 +:10884000A2E712270E266888FFF712FD002C40D001 +:1088500068784007400F032833D16A48FD22817FA2 +:1088600092E736E0287A030012F096FD0604101015 +:108870002020202619270726002C2AD0A180614815 +:10888000A271817F4908490081771AE019270726DC +:10889000002C1ED0A180287A012805D00320A071C9 +:1088A0005848EF22817F6FE70220F8E721462846EB +:1088B000029A01F068FEFEBD55485449801F12F02F +:1088C0004AFC0298002C068001D027806680002098 +:1088D000FEBD02980680FAE710B54A4894B0807849 +:1088E000132802D0082014B010BD22206946087059 +:1088F00009A9684603F021F904460021072003F086 +:108900007CFE2046EFE700B53E4895B080781228FF +:1089100001D00820AAE41E21684601700021817060 +:10892000C17009A903F009F90028F3D1002107203B +:1089300003F063FE1120FFF724FA002096E400B54F +:10894000304895B00078022801D0032818D11B21A7 +:1089500008A801730021817369460BA803F0EDF8A4 +:10896000002804D1684640781B2801D003207DE40C +:108970000021084603F041FE68468078002801D0B7 +:10898000082073E40120FFF7E3F900206EE4F8B556 +:108990001C4C030012F000FD0A06791779797979E9 +:1089A00044356779FFF7CBFF00282AD1F8F7DAFFC3 +:1089B000002826D02221017000210172F8F7B3FFB0 +:1089C000A07F01214BE08EB23046FFF71CFA050074 +:1089D00004D10F480D492E3012F0BDFB2878212814 +:1089E0000FD0F8F7BFFF002814D012210170022722 +:1089F000077246800020A875F8F795FFA07F3843DE +:108A0000A077F8BD640C0020FFFF00003881000053 +:108A10005F050000132229463046FFF7F2FBF0E71E +:108A2000A578122D06D0132D07D0F849F84812F07A +:108A300092FBE6E7FFF767FF01E0FFF74DFF002835 +:108A4000DFD1F8F78FFF0028DBD022210170122D33 +:108A500007D002210172F8F766FFA07F10210843BA +:108A6000CEE70121F6E7A07C810901290BD080091E +:108A700004D0E748E549223012F06DFB03210020C5 +:108A8000FFF70CFCBDE70221F9E7E148DF49293097 +:108A9000CDE7F7B514460D0004D1DD48DB49313090 +:108AA00012F059FB28780827012807D002281FD088 +:108AB000D748D649623012F04EFBFEBD0098FFF752 +:108AC000A2F9060004D1D248D049383012F043FB55 +:108AD0000220B0751030207060783843607007CD88 +:108AE000083407C4CB482022817F11438177FEBD23 +:108AF0000098FFF788F9060004D1C548C3494630FD +:108B000012F029FBA988C448814208D1EA88824230 +:108B100005D1132231460098FFF773FBFEBD814259 +:108B200002D1E888002809D01220207060783843EC +:108B3000607007CD083407C4002006E078230022C7 +:108B40000220009903F0B2FC0120B075FEBDB148CF +:108B500040897047FFB591B01498FAF71BF90028C7 +:108B60005DD10124684603218471C90281800022FD +:108B700001A92046FBF7ECFA002850D168461521E0 +:108B800084714902818000261C2102A8009612F0FF +:108B9000B7F90120014668461031017000200146F6 +:108BA000684641708178F9273940891C21438170DA +:108BB000017A02252943017212998186C6861F21F6 +:108BC00001870C9011980F9001A80B9009AA0BA98E +:108BD00002A8FBF788F8002821D168468D4E808CCA +:108BE000F080684684718D498180807809AA384078 +:108BF000801C41084900684681708586058713A856 +:108C00000F900BA902A8FBF76EF8002807D1684661 +:108C1000808C308131460A311498FAF7CEF815B0BD +:108C2000F0BD30B50C467E4995B08C423CD37D49B1 +:108C3000012292040968944201D38C4234D3203833 +:108C400000220125030012F0A7FB06042A44484E27 +:108C5000575F0021082003F0AAFC002802D0112051 +:108C600015B030BD24206946087000A80522A11C5B +:108C7000023012F0E6F809A9684602F05EFF05002E +:108C80002FD1082300221146184603F00FFC0828B4 +:108C900027D05F485D49D63012F05DFA21E0606868 +:108CA000002803D0884201D21020D9E73D21684630 +:108CB0000170218841806188818009A902F03DFF0F +:108CC00005000ED1606800280BD06946098D01802F +:108CD00007E0206801F0B2FE02E0204600F024FE2A +:108CE00005462846BCE73E2007E0857000E082701C +:108CF00009A902F022FFF3E73420694608702078C2 +:108D0000C0076846F3D0F0E70720A9E730B50C4666 +:108D1000444995B009688C4201D21020A0E7203860 +:108D2000030012F039FB05042121232132002088A1 +:108D3000FFF769F8002804D00078222803D2082021 +:108D40008EE739488CE725216846017021884180EB +:108D500009A902F0F2FE050015D10AA90522023187 +:108D6000A01C12F06EF80EE006250CE0206800282A +:108D700005D0884201D2102505E001F055FE2548B6 +:108D80000025808BA08028466AE7072068E72148F5 +:108D90001330704710B520211E4812F0AFF80120A3 +:108DA000FEF7D6FF1120FEF7ECFF00211948C9435A +:108DB000818000218176E1218900818301460C3088 +:108DC0000D310446F8F74EFE1248072221461330B3 +:108DD00012F037F8FEF7F5FF002803D00B491348CF +:108DE00012F0B9F901F0E5F910BD10B504463C21C7 +:108DF00012F084F8A07F80088000A07720202070E7 +:108E00000020A0752034607010BD00003881000083 +:108E1000B5050000640C0020FFFF0000012A0000DF +:108E200000C0010028000020023000001C070000E4 +:108E30007047FEB50546FF480C46814207D3012026 +:108E40008004844205D3FC480068844201D210208B +:108E5000FEBD002D02D0012D32D126E0F7490822B7 +:108E60000F46684611F0EDFF39462046FFF78EF9B0 +:108E70000028EDD1FEF7A5FF060006D007226946BF +:108E8000384611F0DEFF3046FEBD2078002801D0C4 +:108E9000012805D1E94807223946C01D11F0D1FF4C +:108EA0000021092003F0A9FB0FE00978002907D071 +:108EB000012905D0022905D0032903D0E048FEBDD1 +:108EC0000720FEBD0120FFF7E9F9DC480C38857664 +:108ED0000020FEBD10B5D8490968884201D2102093 +:108EE00092E7D64902460C390B7B0D311846FFF745 +:108EF00077F9002088E7FFB599B00546002008A95A +:108F000008746946087108A908730875CA481446A8 +:108F10000121C84A890400681E46002D05D09542EB +:108F20000BD38D4201D3854207D3002C08D0944245 +:108F300003D38C4204D3844202D210201DB0F0BD72 +:108F40002846204318D01F270BAB0CAA00972846B1 +:108F50001A99FFF79FF80028F0D10DAB01AA31460E +:108F600020460097FFF796F80028E7D16846007979 +:108F7000C00703D00A20E1E70720DFE702AF002D9A +:108F80000FD01A20694608721A9888722946F81C70 +:108F90001A9A11F056FF0EA902A802F0CEFD002881 +:108FA000CCD1002C0ED02021684601728672324648 +:108FB0002146F81C11F045FF0EA902A802F0BDFDE4 +:108FC0000028BBD19D4908A8007B0C3948700020BF +:108FD000B4E770B506460A200C46087015461146DF +:108FE000204602F0AAFD002807D139212170204631 +:108FF000294602F0A2FD002804D0082801D190489B +:10900000401C70BD2A462146304600F0B9FC04469B +:10901000082803D18B498C4812F09DF8204670BD7A +:10902000F0B5044689A003C897B0824D002715917A +:109030001490AC4211D380480121890403688C420A +:1090400001D39C4209D32078012809D16268AA4241 +:1090500003D38A4204D39A4202D2102017B0F0BD43 +:1090600076490C390A78012A0CD18A88794B9A42C0 +:1090700003D0002806D0012804D08A7F13079B0F55 +:1090800006D101E00820E9E7D30701D1910701D516 +:109090001120E3E7218A704B0A46203A9A4207D30F +:1090A000012877D1002975D1628A002A72D111E096 +:1090B000022801D0032801D1A0296BD3012809D0AF +:1090C0005E4A0C3A5278D20704D0628A002A61D0F4 +:1090D000B42A5FD8002806D0012808D0022804D07E +:1090E000032857D117E0002518E0022516E00029D3 +:1090F00002D1608A00280CD004256068007800281E +:109100000CD0012809D0022807D0032805D04C48EC +:10911000A4E70125F1E7032500E00127207A0028D4 +:1091200006D0012806D0022806D0032867D105E022 +:10913000002604E0012602E0022600E00326002DBE +:1091400001D0022D16D1002E14D0E068002803D0E3 +:10915000FEF732FF002881D138480C38407880076C +:1091600002D03748401E79E7022D03D1022E46D0A7 +:10917000032E44D0182168460170218A4180218A3B +:10918000818085712D480C38007B002803D0012890 +:109190006FD104E033E000216846C17102E0012094 +:1091A0006946C8716846077221780930012920D0C4 +:1091B000062111F0A3FE69460E74207D8207C107C7 +:1091C000D20F4007C90F5200C00F11438000014366 +:1091D00014A8405C6946C873002810D009A96846E5 +:1091E00002F0ABFC002893D1002D0AD0022D08D04C +:1091F00012E061680622491C11F023FEDBE707201C +:109200002CE7002E08D0E068002805D009AA69469E +:10921000FFF7DFFE0028A6D11B2069460870012059 +:10922000887009A9684602F088FC00289BD108A82C +:10923000407913E000C0010028000020700C0020DD +:1092400002320000388100002708000007060504EC +:1092500003020100FFFF0000E13F00001B2819D1BD +:109260002B0012F099F80504040707040A000320F4 +:1092700001E00FE00220FEF76BFD012D0CD0608AAB +:10928000002809D0002283001146104603F00EF991 +:10929000002801D00320E1E60020DFE6F3B5032635 +:1092A00087B00D4600290AD0FE4885426FD30120C1 +:1092B0008004854203D3FC480068854267D3079841 +:1092C000FEF7A1FD040005D02078222804D2082052 +:1092D00009B0F0BDF548FBE7A07F8707BF0F002D61 +:1092E00005D029463846FEF732FE0600F0D1394651 +:1092F0000027EF48012907D0022931D0ED49EE4877 +:1093000011F029FF3046E3E7A27D2946012A02D069 +:10931000827F920701D51120DAE700291BD10821AD +:109320006A46049711820592418904AAE348FBF733 +:10933000FFFA0028CCD16846008A082801D0032013 +:10934000C6E7684601880181418841818188818121 +:10935000C188C18102A9079802F0E7F90646D1E762 +:10936000A17D022916D1807F800613D4002D04D060 +:10937000A07F40070CD4002100E00121079802F0F3 +:1093800014FA0600BED1A775002DBBD004E01AE088 +:109390001126B7E7002D16D02A4621460798FEF77A +:1093A00050FF06461128ADD1A07F4007AAD4204621 +:1093B000082229460E3011F044FDA07F0421084305 +:1093C000A07700269EE7102082E770B50C46054680 +:1093D000FEF719FD010004D022462846FEF711FFD2 +:1093E00070BDB24870BD00B50146143195B0192961 +:1093F00001D2810707D001461E3104D00A3102D0C4 +:10940000072015B000BD312269460A70887009A98D +:10941000684602F092FBF4E701B582B0022069468B +:109420000880A34802AB00896A460021FBF7EAF8EE +:1094300069460988022900D003200EBD1CB5002111 +:10944000009102216A46118097490190096888427B +:1094500001D210201CBD964801899848FBF768FA94 +:10946000694609880229F5D003201CBDF0B50E46D7 +:109470008C4985B0174605468E4207D38A4801229B +:1094800092040068964204D3864202D2102005B0AE +:10949000F0BD1F2F01D90C20F9E7854C8D4226D352 +:1094A000954201D3854222D3E08803A9FBF75BF8FC +:1094B0000028ECD1287869464873E08803A9FBF7B7 +:1094C00033F80028E3D16946009008780221084368 +:1094D00069460870497B090703D00821084369469B +:1094E0000870E0886946FAF7B8FF0028CFD16946CE +:1094F0008F80E088334601AA0021FBF783F8694694 +:109500008988B942C3D00320C1E71CB50C460021AD +:1095100000910191228869460A8063490190096897 +:10952000002801D0884201D38C4201D210201CBDFA +:10953000002801D0002A09D05D486A46C1885F48EA +:10954000FBF7F6F96946098821801CBD0C201CBD7B +:1095500010B50123FEF75DFC56E4002310B51A4652 +:109560001946FEF756FC4FE470B504464D4894B0DA +:10957000844207D301208004844206D34A4800680D +:10958000844202D2102014B070BD2046FEF766FD62 +:109590000028F8D146488178112901D00820F2E747 +:1095A000817FC90601D51120EDE71D2269460A70A9 +:1095B00021780025CA07D20F69468A7022898A80DD +:1095C0006289CA80217801268907CA0F69464A72D2 +:1095D000007B002803D0012804D00320D3E70846ED +:1095E0000D7201E008460E7209A902F0A6FA0028E1 +:1095F000C9D12078800708D56068002805D009AA5D +:109600006946FFF7E6FC0028BDD11E2168460170BF +:109610008670C57009A902F090FA0028B3D1A0891C +:1096200000F073F90400AED11220FEF7AAFB204629 +:10963000A9E7F0B516461C4A0C4605001948204912 +:10964000126899B005D085420FD38D4201D395425F +:109650000BD3844209D38C4201D3944205D3864272 +:1096600003D38E4204D3964202D2102019B0F0BD2B +:109670000F4FB87FC106890F01D1400701D51120D6 +:10968000F4E72046FEF7EAFC0028EFD120788107B6 +:10969000C90F294303D0800714D5002D12D007200D +:1096A000E4E7000000C001002800002002300000B4 +:1096B000640C002038810000F3090000FFFF000067 +:1096C0000000040031460220FEF741FC0028CDD105 +:1096D000C9488078112803D0122801D00820C5E796 +:1096E0000220002714A9189002F08DFB00280DD04D +:1096F000C2A1C64811F02FFD08E01598807F8107B0 +:109700001898890F814201D17F1CFFB214A802F082 +:1097100088FB0028F1D0032F01D30420A6E7B64828 +:109720008078122803D1FFF7EEF800289ED1207828 +:10973000800708D56068002805D009AA6946FFF7A8 +:1097400048FC002892D1212168460170218941807E +:1097500061898180207800278007C10F6846817168 +:1097600020788007002815DB2878002807D00128FA +:1097700008D0022806D0032804D0A54876E768461A +:10978000C77102E001206946C8710622691C02A85F +:1097900011F057FB9848007B002803D0012804D023 +:1097A000032063E76846877302E0012069468873F7 +:1097B00031886846018271884182B1888182F1884E +:1097C000C1820783478309A902F0B7F9002886D12F +:1097D000A08900F09AF80400A0D11320FEF7D1FA76 +:1097E000204643E730B505468A4895B000680C46E8 +:1097F000814202D2102015B030BD2846FEF703FB8F +:10980000002807D00178222902D3807F800603D464 +:109810000820F0E78048EEE7132168460170458094 +:1098200009A902F08AF90028E5D108AA0A215156AF +:109830007F2901D02170DEE70520DCE710B56E49F5 +:10984000012807D0022815D0FF206CA14D3011F05F +:1098500082FC81E60878032804D0FF2067A143300A +:1098600011F079FC0021084602F0C7FE0120FEF746 +:109870006FFA71E68878132804D0FF205FA1483082 +:1098800011F069FC0021072002F0B7FE1120FEF75D +:1098900078FA61E6F8B504460122022102F044FAA2 +:1098A000074601220321204602F03EFA0646012225 +:1098B0000521204602F038FA0546012204212046FF +:1098C00002F032FA0446002F04D1AF204BA18000F1 +:1098D00011F041FC002E04D14C4848A11A3811F077 +:1098E0003AFC002D04D1494844A1193811F033FC49 +:1098F000002C04D1454841A1183811F02CFC22213C +:109900003846FEF7B7FA3846F8BD10B5002809D03A +:10991000830000221146072002F0C8FD072801D06D +:10992000032019E6002017E610B504460068002859 +:109930000CD03A49884207D301218904884205D3D3 +:1099400034490968884201D2102005E601F060F828 +:10995000A088294CA083A07E01280DD100210920D8 +:1099600002F025FE002800D00120A17C89090129F0 +:1099700004D00321FEF792FC0020EDE50221F9E777 +:10998000F7B500260C4605460B271AE02968B000FB +:1099900009580978002903D0012901D00720FEBD0C +:1099A000A170296806220958E01C491C11F049FAE7 +:1099B00027702046029902F0C0F80028EFD1761CEB +:1099C000F6B22879B042E1D800263A270FE0A8681D +:1099D000B10041581022A01C11F033FA2770204624 +:1099E000029902F0AAF80028D9D1761CF6B2287B99 +:1099F000B042ECD80020FEBD640C00207372635CA2 +:109A00006761705F636F72652E630000D7020000AC +:109A100002320000280000200230000000C00100D7 +:109A200030B5FE4B9A4207D301239B049A4205D3DB +:109A3000FB4B1B689A4201D2102030BD1578EB0613 +:109A40005B0F042B07D85478072C04D39378102B82 +:109A500001D8A34201D2072030BDD3785B0702D4DE +:109A600013795B0701D5062030BDC37FAC075B08C7 +:109A70005B00E40F2343C3770878EF231840137883 +:109A80009B06DB0F1B0118430870F1231840137865 +:109A9000DB065B0F5B0018430870507808730020EA +:109AA00030BD30B500240C70C378DB07DB0F0B70C2 +:109AB000C578AD07ED0F6D002B430B70C5786D07B2 +:109AC000ED0FAD002B430B7014700179C907C90F5E +:109AD000117003799B07DB0F5B001943117000794C +:109AE0004007C00F80000143117030BD70B51446AF +:109AF0000D460646F7F736FF002809D0A22101706F +:109B0000142221460830F7F75FFBF7F70CFF70BD12 +:109B1000132229463046FEF774FB70BD70B514461B +:109B20000E460546F7F71EFF002809D022210170D6 +:109B300045802178017261784172F7F7F4FE70BDBB +:109B4000132231462846FEF75CFB70BD10B5B54CBC +:109B5000207C00280DD12046B34A21461038FEF75C +:109B6000A7F8002803D0B1A1F12011F0F4FA0120E8 +:109B7000207410BDFFB581B00A9D06461C461746ED +:109B80001421284611F0BCF90B9800210160F80758 +:109B90000ED0A34920680968884239D31230286062 +:109BA0002068143068602068A8600B982168016004 +:109BB000B80726D56068002803D09949096888420B +:109BC00026D3029900290AD0FC3600280ED031464F +:109BD0001030FEF7DBFA00281BD1606810E0002887 +:109BE00016D0E86080366068B0670AE0FFF7CFF80B +:109BF00001460722304611F024F9FFF7A7FF8948F4 +:109C0000E860780708D58649A0680968884202D2CA +:109C1000102005B0F0BD28610020FAE770B50546B8 +:109C200011200C460870002161702121495D002936 +:109C300008D003290ED0042910D0FF207BA1523078 +:109C400011F089FA20780009012802D9E87FC008BC +:109C5000607070BD0007000F203002E00007000FA9 +:109C600030302070EEE770B594B015460C462C22CB +:109C70006946189E0A704880002B17D008221946A2 +:109C800001A811F0DEF868468581102231460E30B9 +:109C900011F0D7F809A9684601F04FFF002803D159 +:109CA000A17F10221143A17714B070BD0020019054 +:109CB0000290E8E7F0B50646008A97B080B20D46FC +:109CC0000190FEF7A0F804465648317848385B4FBB +:109CD00009900B0011F060FB0EFEFD43084A7283F1 +:109CE000B8D9FCFBFAF9F8FEA07F8007800F0128A5 +:109CF00007D000210022019802F016F8050007D1D4 +:109D000001E00121F6E7FF2048A1943011F023FA89 +:109D1000387CC00904D049484038406DA86112E041 +:109D20002B20694608720BA902A801F006FF002843 +:109D300004D0FF203DA19F3011F00DFA40490C984E +:109D400011F0E8F8A9617068A862B068E86220784C +:109D5000252804D0FF2035A1A53011F0FCF93246AA +:109D600021460198FFF7C2FE17B0F0BDA07F800723 +:109D7000800F012807D000210022019801F0D4FFB4 +:109D8000060007D101E00121F6E7FF2027A1AF304F +:109D900011F0E1F92078252804D03078012108431A +:109DA0003070E1E702202870B068A860B068002831 +:109DB00002D000202871D7E70120FBE72B2069465D +:109DC0000870184968464C3901F0B7FE002804D0E5 +:109DD000FF2016A1CE3011F0BEF903201BE02A208F +:109DE0006946087000A810220230716811F029F845 +:109DF00004A810220230B16811F023F8094968461E +:109E00004C3901F09AFE002804D0FF2007A1DF3072 +:109E100011F0A1F904202870099813E000C0010096 +:109E200028000020300D0020FFFF00007372635CEB +:109E30006761705F7365632E63000000500E002041 +:109E400040420F0068608FE7B068002804D1FF200F +:109E5000F649EB3011F07FF9E07F400704D5FF2091 +:109E6000F249EC3011F077F9B06806220A38009018 +:109E700033790421019801F058FA002891D0FF208D +:109E8000EA49F13011F067F96EE7002C04D1FF20A8 +:109E9000E649F93011F05FF92046223010220546DC +:109EA000716810F0CEFF28212046FDF7E3FFA07F68 +:109EB0008007800F022814D100231A4621460095FE +:109EC0000198FFF7D0FE06E055E1B6E0ACE089E08E +:109ED0002CE065E069E111280BD029212046FDF72F +:109EE000C9FFE07F317A4007400FC9000843E0779F +:109EF0003AE7A07F000703D5CC49CD4811F02BF9F4 +:109F0000A07F08210843A0770020608620463430D7 +:109F100010F0F4FFE07FFD220146C9071040890FD1 +:109F20000843E077307A203420701DE7A07F800757 +:109F3000800F012807D000210022019801F0F4FED3 +:109F4000040007D101E00121F6E7B948B7491D3007 +:109F500011F001F92B2069460872B64902A801F0F8 +:109F6000ECFD002804D0B248B049223011F0F3F8DB +:109F7000B0488188204621300176090A41760E21B9 +:109F800029702146FC316960017E2974407E687425 +:109F9000A8482C30A860103030346C61E860E3E6EB +:109FA000002C04D1A248A149363011F0D4F8207811 +:109FB00021289DD93079012802D0022808D103E058 +:109FC000E07F04210843E077387C0121084338749E +:109FD000324621460198FFF789FD23212046FDF7EF +:109FE00049FFC1E601220421019801F07DFC00280F +:109FF0009BD0A07F8007800F012807D0002100227E +:10A00000019801F091FE040007D101E00121F6E77B +:10A0100087488649543011F09EF80F202870172089 +:10A0200028716E34AC609FE60421019801F0ABFC0E +:10A030000028B4D11020287096E6A07F8007800FFA +:10A04000012807D000210022019801F06DFE0500D3 +:10A0500007D101E00121F6E7754874496D3011F030 +:10A060007AF82E462036307E41064DD5A17F8F07E7 +:10A07000BF0FC00713D02A468032516F00290ED07F +:10A08000087CF37DC007C00F5B0018430874516F54 +:10A09000E27F40084000D207D20F10430874307EA0 +:10A0A000000713D528468030026F002A0ED0117C9D +:10A0B000F37DC907C90F5B0019431174E27F49089A +:10A0C0004900D207006FD20F11430174307E800720 +:10A0D0000BD5F8204259002A07D0012F05D0294678 +:10A0E000307C31311032FEF77BF8307EC0060BD564 +:10A0F000F8204259002A07D0012F05D12946307C8B +:10A1000031311032FEF76CF8052368460370357E56 +:10A110004570484822226038019902704278D2087E +:10A12000D200D21C4270418003724572F7F782FD63 +:10A130002078252809D021280BD0AD203B4980006C +:10A1400011F009F82078222803D922212046FDF7B2 +:10A1500091FEA07F8007800F01280AD0002101987E +:10A1600001F009FE002800D1FEE5AF202F49800054 +:10A1700088E60121F3E774682E4D207860350928C0 +:10A1800002D00A28F0D10BE0E168002902D028466D +:10A19000F8F7D7FE2169002902D02846F8F7D1FE4A +:10A1A00021462846F8F7CDFEDEE521481F49DC3080 +:10A1B00068E6204810B5072228216030F8F7A8FE8D +:10A1C0001D480024017C4906490E0174403844654D +:10A1D000FDF7FBFC17493C3108461038F7F779FCCE +:10A1E00014484C30047410BD70B50D46FDF70BFEDD +:10A1F000040004D103200D49000210F0ACFFFF2140 +:10A200000531284610F07CFEA07F8007800F0128D2 +:10A2100016D0022128468830FDF7D8FC002803D04C +:10A220000249064810F097FF70BD00002C9E000008 +:10A2300005020000E40C0020500E00200503000081 +:10A240000121E7E70A46014610B510468830FDF7C0 +:10A25000D7FC10BDF0B505464068082601789BB0D4 +:10A2600008290DD00B2903D00C293FD10121817180 +:10A27000686887883846FDF7C6FD040041D13BE099 +:10A2800047883846FDF7BFFD040003D1FD49FE486D +:10A2900010F061FF2078212828D0282828D168686C +:10A2A00002210C3000F0BEFF002821D06868082190 +:10A2B000001D00F0B7FF00281AD02D21684601705C +:10A2C000478021461022223101A810F0BAFD0FA9C3 +:10A2D000684601F032FC002804D0CB20E949800018 +:10A2E00010F039FF29212046FDF7C4FD1BB0F0BD59 +:10A2F000687830436870F9E7E348E2492D3010F0A0 +:10A300002AFFA07F8107890F022902D1EF2108408F +:10A31000A0772078212810D068688179002902D0A0 +:10A320008078002818D0A07F8007800F022864D092 +:10A330000720D449C00110F00EFFA07F8007800FD6 +:10A340000228D3D1FDF7ECFF0028CFD0CE48CD496D +:10A35000733010F000FFC9E7687830436870E07F21 +:10A36000C00701D0042100E00321212001552078FD +:10A37000292818D02428E0D13946062002F03DF9DA +:10A3800022212046FDF776FDA07F8007800F01285F +:10A3900031D00021384601F0EEFC0028CDD0BA487B +:10A3A000B8495830C7E7A07F8007800F012807D041 +:10A3B00000210022384601F0B7FC050007D101E07A +:10A3C0000121F6E71B20AF49400110F0C4FE252112 +:10A3D0002046FDF74FFD0D2008A90871284609A960 +:10A3E0008830FDF7FFFB0228A7D00028A5D0A6489B +:10A3F000A4494D309FE70121CCE76878304368706D +:10A400009BE7F7B58AB00A98FDF7FDFC050056D02A +:10A410002878222853D3232851D0E87F40074ED4F0 +:10A42000A87F8007800F01280ED0002201280DD0C0 +:10A4300000210A9801F078FC064694480290F8F74B +:10A4400077FD040009D103E00122EFE70121F0E7E5 +:10A4500075208C49C00010F07EFE002E0FD088368B +:10A4600066610298F8F764FD07460298F8F760FD08 +:10A4700006462878222807D0242805D008E00020A6 +:10A4800007460646606103E025212846FDF7F2FCF9 +:10A49000092020700A9820620C9820710B98E760C0 +:10A4A0002661A06004A92046FDF7C0FB022806D063 +:10A4B000002804D074487349AF3010F04CFE0DB042 +:10A4C000F0BD30B587B00446FDF79DFC0546807FA2 +:10A4D0008007800F01280BD000210022204601F0C8 +:10A4E00023FC0446287822281ED9002C07D101E03D +:10A4F0000121F2E764486349BB3010F02CFE0F21C4 +:10A50000684601701721017120466E30029069463D +:10A510001A30FDF767FB022806D0002804D05A48FD +:10A520005849C03010F017FE07B030BD30B587B0C5 +:10A530000446FDF768FC0546807F8007800F0128F0 +:10A540000BD000210022204601F0EEFB04462878C3 +:10A550002228E9D9002C07D101E00121F2E74A487D +:10A560004849CD3010F0F7FD1020694608702046AC +:10A570008830FDF737FB0028D6D043484149D0301A +:10A5800010F0E9FDD0E7F7B505460078002700098F +:10A5900082B00C463E4602287CD0072802D00A280A +:10A5A00049D149E068680178082906D00B292FD0E5 +:10A5B0000C292DD03349364865E114271A26002C82 +:10A5C00069D04088A080FDF71EFC0090002804D1CF +:10A5D0002F482C49243810F0BEFD00980099C07D0A +:10A5E000A21D1831FDF7FCFD686808228089E08112 +:10A5F000696820461030091D10F023FC207E0121DF +:10A600000843F9210840207600984021807F50E0DF +:10A6100018270826002CD3D08088A080FDF7F3FBF4 +:10A62000050004D11A481749401F10F094FDA11DE0 +:10A630002846FFF7F3FA28E1002C01D0288BA080F0 +:10A64000287A01287ED0022805D0032838D0104867 +:10A650000C49853017E11C270726002CB0D0A088B4 +:10A66000FDF7D1FB0090002804D1094805491330BB +:10A6700010F071FD287B8007800F0128A0791CD085 +:10A68000400809E02C9E00001A030000440D002041 +:10A6900027040000E9E0E3E04000A071FD2108404C +:10A6A000297B4907C90F49000843A0710098802100 +:10A6B000807F084300998877E7E001210843ECE7B1 +:10A6C00013270B26002CA6D0A088FDF79CFB00903A +:10A6D000807F8007800F012807D00021A0880022FA +:10A6E00001F022FB050006D101E00121F6E7FB495C +:10A6F000FB4810F030FD0098807F8007800F012814 +:10A7000050D0E86A81788907890F0129A1794BD057 +:10A7100049084900A1718278FD255207D20F2940CE +:10A7200052001143A171E322114002785207D20E68 +:10A730001143A171DF2211404278D207920E1143DA +:10A74000A17100E033E00021E171C178217242790A +:10A750000179607AD30740084000DB0F1843930764 +:10A76000DB0F28405B0018435207FB23D20F184031 +:10A77000920010436072A07ACA0740084000D20FCE +:10A7800010438A07D20F2840520049071043C90FCF +:10A79000184089000843A07200980078232874D9D3 +:10A7A0002621C4E0A86AADE701221143B2E7297B64 +:10A7B000CC48022911D017270C26002C50D0012993 +:10A7C00012D003291FD0042920D005291ED09320A0 +:10A7D000C249C00010F0BFFC23E019270726002C57 +:10A7E00053D00121A17105E00121A171E17989080E +:10A7F0008900E171017CCA094906D201890E49002C +:10A800000A4302740DE00220A07106E0687B000795 +:10A81000000F8030A07105291DD0E07980088000EC +:10A82000E071A088FDF7EFFA0546007821282CD0CA +:10A83000232804D0AA48A949573010F08CFCA87FDF +:10A840008007800F01280ED00021A08801F093FA24 +:10A85000222128466CE0E07980088000401CDFE778 +:10A860000498068017E00121EFE7002C01D06888EA +:10A87000A080287A032832D004280FD005285AD087 +:10A8800097489649B03010F066FC0498002C06807A +:10A8900001D027806680002005B0F0BD15270C266A +:10A8A000002CDDD0A088FDF7AEFA807F8007800FF6 +:10A8B000012807D00021A088002201F035FA050008 +:10A8C00007D101E00121F6E785488449763010F090 +:10A8D00042FC0622A11DA86907F036FAD5E7162723 +:10A8E0000726002CBCD0A088FDF78DFA0090807F51 +:10A8F0008007800F012807D00021A088002201F0E6 +:10A9000013FA050007D101E00121F6E77448734905 +:10A91000843010F020FC2878C00601D5022000E029 +:10A920000120A071009800782328AED92721009833 +:10A93000FDF7A0FAA9E717270C26002C90D0A088D5 +:10A94000FDF761FA00906D7A002804D164486349EC +:10A95000973010F000FC0621A01D10F0CFFA002067 +:10A96000A071207A032108432072FB21084000993E +:10A97000C97FC907490F08432072680685D5E07969 +:10A9800004210843E071A07AE90740084000C90F9C +:10A990000843E17A2A0749084900D20F1143FD22F2 +:10A9A000AB07DB0F10405B001843A072E806C00F36 +:10A9B000114040000143E17267E710B50446807919 +:10A9C00090B08009012804D045484449C93010F0AE +:10A9D000C2FBFFF7BBF801206946087042480890A7 +:10A9E00042480190201D0290601C0B900AA9684605 +:10A9F000FDF71CF9002804D039483849D43010F04C +:10AA0000AAFB0322601C0B9910F01BFA10B010BDBA +:10AA100010B5364C002805D001461022204610F013 +:10AA200010FA0120207410BD10B50446FFF78EF80F +:10AA300010222E49204610F004FA10BD70B50025F2 +:10AA4000284C00281CD02A49884207D301218904B8 +:10AA5000884205D327490968884201D210250DE0B4 +:10AA6000062107F05BF9411C07D01E4940394865B3 +:10AA7000207C80210843207400E00725284670BD13 +:10AA8000207C4006400EF6E7F3B5002089B00D4665 +:10AA9000029000290AD0164885421CD30120800468 +:10AAA000854203D313480068854214D30998FDF703 +:10AAB000AAF9060003D03078222826D102E00E48F9 +:10AAC0000BB0F0BD002D19D1B07FC10903D08007B4 +:10AAD000800F022812D01020F2E700002C9E000008 +:10AAE0004D040000500E0020FFFF0000300D00203C +:10AAF00000C001002800002002300000B07FC10625 +:10AB000001D4010703D5002D01D00820D8E7FE4964 +:10AB1000097CC90717D1F17F490701D50D20CFE77F +:10AB20008007800F01280CD000210122099801F034 +:10AB3000FBF8070007D0B07F8007800F022804D001 +:10AB40000DE00121F1E71120BAE7002D07D02A46D8 +:10AB500039463046FEF764FF02900028B0D1EB483A +:10AB6000F8F7E6F9040003D1E949EA4810F0F3FAEE +:10AB70000A2020700998206238468830A060B07F93 +:10AB8000FB218007800F012829D0002D3DD0022015 +:10AB90002071381DE06038780007400F2074387845 +:10ABA000C006C00F6074A07C2A788008D20780009D +:10ABB000D20F1043A0740840F17F01AAC907490FC2 +:10ABC0000843A074A878E07469462846FEF769FF38 +:10ABD00068460079207568460078607519E00120A4 +:10ABE0002071207B2A788008D2078000D20F104382 +:10ABF0002073084029788907C90F8900084320730A +:10AC000024213046FDF736F90BE0032020710520A2 +:10AC1000207325213046FDF72DF9B07F4006400E08 +:10AC2000B07703A92046FDF701F8022806D00028D6 +:10AC300004D0B848B6492B3010F08DFA02983FE79F +:10AC4000FFB5B54A0E4607CA97B002AB07C3002747 +:10AC500001970C971798FDF7D6F8050005D02878CE +:10AC6000262804D008201BB0F0BDAC48FBE7A87F25 +:10AC70008007800F012807D000210022179801F0DB +:10AC800053F8040007D101E00121F6E7A148A049EB +:10AC9000623010F060FAA87F8007800F16900128BC +:10ACA00014D0022824D09B4899497B3010F053FAE5 +:10ACB00001210022852E31D01EDC002E26D0812ECF +:10ACC00026D0822E26D0832E1ED125E0002EEFD155 +:10ACD00021462846199AFEF7A3FE0028C3D11998E9 +:10ACE0008078019019980078C007C00F0C90DFE7BA +:10ACF0001998002808D1DBE7862E11D0882E11D0B4 +:10AD0000892E11D08A2E11D00720ACE710460EE014 +:10AD100008460CE002200AE0032008E0052006E0D7 +:10AD2000062004E0082002E0092000E00A200022BA +:10AD3000227101216A461176211D0791002801D058 +:10AD400020710BE1169801280CD0A66AE06A022255 +:10AD5000012111900020A0602846173002291AD046 +:10AD6000012119E0E66AA06A119003203070207872 +:10AD7000FB23C006C00F7070B07801221840019B01 +:10AD8000F37080080C9B800018430221B0700020F3 +:10AD900070713071DEE70021890009190861681CB3 +:10ADA000022A01D0012100E000218900091908616F +:10ADB000B0788007800F01285ED1119880788007D5 +:10ADC000800F012858D1119800790190119840798D +:10ADD0000090169801281DD0317908A80174717966 +:10ADE000017508A8027C01980099024008A8007D1E +:10ADF0000840149010433FD049491A98884207D31D +:10AE000001218904884215D346490968884211D234 +:10AE1000102028E70CAA0DA91998FEF742FE08A8F1 +:10AE2000007C01990840307108A8007D0099084015 +:10AE30007071D6E720463C3021460090F0311698DC +:10AE40000191022834D000211A9B20460C33FEF7D2 +:10AE500091FE0028DDD12046503021460090F4318B +:10AE600016980191012825D0002120461A9B149A9A +:10AE7000FEF780FE0028CCD111988078400702D4DC +:10AE8000E87FC0072BD0169902A8012914D0119988 +:10AE900009784900405A21780907490F4900C840FC +:10AEA0008707BF0F2AD0012F14D0022F0FD113E034 +:10AEB0000121C9E70121D8E721780907490F490095 +:10AEC000405A119909784900C8408707BF0F032FDE +:10AED00004D004E0022711E001270FE002271698B2 +:10AEE00001280BD1B078FB210840E97FC907490F41 +:10AEF0000843B07020780007400F30702078400879 +:10AF00004000207011990FE0500E0020440D0020E9 +:10AF10002C9E0000A90500001CB4010002300000B6 +:10AF200000C001002800002049781022C907C90E7E +:10AF3000D243114308402070C00622D4022F20D0F3 +:10AF4000012F20D00020A061E061206260622046D5 +:10AF50001830A060E87F40084000E877204606A946 +:10AF60008830FCF73FFE002805D0022803D0B44902 +:10AF7000B44810F0F0F825212846FCF77BFF0020AC +:10AF800071E6032008E020460D211B300FF0B6FFCC +:10AF900020461830A060042069460875E87F01212A +:10AFA0000843E87705AA29461798FEF7B7FDD5E7C5 +:10AFB000F0B587B015460F0004460DD0A248854273 +:10AFC00007D301208004854206D3A048006885424B +:10AFD00002D2102007B0F0BD2046FCF714FF060097 +:10AFE00004D03078272803D00820F3E79848F1E709 +:10AFF000B07F8007800F012807D000210022204663 +:10B0000000F092FE040007D101E00121F6E78D482F +:10B010008B491F3010F09FF80020002F05D0022F21 +:10B0200008D0012F11D00720D4E701216A46117101 +:10B03000A06018E0234618336946A3600871102207 +:10B04000294618460FF0FDFE0DE021461831A1609B +:10B0500069460871A061E0612062606206212846AD +:10B0600006F05CFEA0612078C10714D040084000C3 +:10B070002070022069460870204618300290703017 +:10B08000FCF7B0FD022806D0002804D06D486C49BA +:10B09000423010F060F825213046FCF7EBFE00202E +:10B0A00098E7F8B515460E460746FCF7ACFE0400D7 +:10B0B00004D02078222803D00820F8BD6448F8BDC9 +:10B0C000A07F8007800F022802D06148C01CF8BD15 +:10B0D0005D4886420ED3012189045C4A8E4202D328 +:10B0E00013689E4206D3854204D38D4204D3106870 +:10B0F000854201D21020F8BD00953288B31C21464C +:10B100003846FEF7B0FD112816D00028F3D1E17FB4 +:10B110002A7C4908D2074900D20F1143E1772A7CE3 +:10B1200049079206490FD20ED2001143E177A17F61 +:10B130004906490EA177F8BDA17F0907FBD4204637 +:10B140000822B11C34300FF07CFE30886086204627 +:10B150001022294622300FF074FEE07FFD210840C6 +:10B16000297CC907890F0843E077287C4108202003 +:10B170000155A07F08210843A0770020D7E770B5CC +:10B1800094B00D460646002B02D0072014B070BDC7 +:10B19000FCF739FE040007D02078222802D3A07FD4 +:10B1A000400603D40820F1E72948EFE7002D19D025 +:10B1B0002D216846017046801022294601A80FF013 +:10B1C00040FEE07F297C4008C9074000C90F0843C2 +:10B1D000E077297C40078906400FC90EC900084363 +:10B1E000E07703E02E2168460170468009A9684691 +:10B1F00000F0A3FCA17FBF221140A177C6E710B5E4 +:10B200000C46FCF700FE002805D0104909688C4266 +:10B2100003D2102010BD0E4810BD2146FEF7FEFCE3 +:10B22000002010BD05E00278401C002A01D000205B +:10B2300070470A46491E89B2002AF4D1012070479E +:10B240002C9E0000ED06000000C001002800002038 +:10B250000230000030B50346072903D00620DA7813 +:10B260001C7916E00320FAE707290BD05500ED18EA +:10B270006D79072D01D0401EC0B2521CD2B2092AEE +:10B2800007D105E05500ED186D79072DF3D0F4E7EF +:10B2900000222546641EE4B2002DE5D130BDFFB585 +:10B2A00081B00C461646114620460A9F0B9DFFF7BB +:10B2B000D1FF00280AD02079092803D3FEA1A020BD +:10B2C0000FF049FFA078C00907D019E0072E02D07F +:10B2D000112005B0F0BDFD48FBE701982880381D1E +:10B2E0006880002068712871EF80049828812846C2 +:10B2F00000F04BFC002803D1EFA1AD200FF02BFF95 +:10B30000E07821794018491CC0B22171092801D385 +:10B310000938C0B24000001946718179F12249080C +:10B320004900114081710020D3E7FFB583B0164674 +:10B330000F461C46002203210C9D039800F0F4FCEC +:10B34000010008D033463A46019500940398FFF770 +:10B35000A6FF07B0F0BDDD48801EFAE7F0B5054650 +:10B3600016460F4650888DB00022032100F0DCFC09 +:10B37000040003D1D0A1DF200FF0EDFE00206946CC +:10B380000871A078400603D1CBA1E3200FF0E3FEC3 +:10B39000042F5ED32A78D007C017401C06D16178ED +:10B3A0006B78994255D12178090752D00121142A8E +:10B3B00046DA012A42D0122A02D0132A40D128E0CC +:10B3C0000C2F3DD1A2785206520E012A38D0207897 +:10B3D00000090001401C20706878607068460171A7 +:10B3E00068792A790102114368460181E879AA79CE +:10B3F0000102114368464181687A2A7A01021143A9 +:10B4000068468181E87AAA7A010211436846C181BF +:10B410001AE0062F14D120780009000120707188ED +:10B42000012001F0EAF8022168460171C91E01817C +:10B4300068792A790102114368461FE0062F0AD075 +:10B440006A461279002A1BD07088324601A9FDF79E +:10B4500020FB0DB0F0BD207800090001207071883C +:10B46000012001F0CAF802216846017168792A7941 +:10B4700001021143684601810021C9434181E3E78C +:10B480000028E6D07488684681766978C176022102 +:10B4900081830021C18304A8052200900623114660 +:10B4A0002046FFF742FF0028D3D089A1D6200FF015 +:10B4B00052FECEE7F7B58CB015460C990D98FAF709 +:10B4C00041F9C0B2082850D10020694688856888B3 +:10B4D0000022032100F028FC040004D1FF2076A103 +:10B4E00063300FF038FE01230021E07822790BE071 +:10B4F0004600361976799E4201D1491CC9B2401CDA +:10B50000C0B2092800D100201646521ED2B2002E29 +:10B51000EED1002902D117206946888504AB023399 +:10B520000BAA00950C990D98F8F7B6FB0006000ED3 +:10B5300007D002281BD0032817D0FF205EA1893036 +:10B5400011E06846808D00280FD002A9019100907B +:10B550006888042301222146FFF7A1FE002804D0B9 +:10B56000FF2055A176300FF0F6FD0FB0F0BD6878E2 +:10B57000102108436870F8E700205A49024643004A +:10B58000401CCA520828FAD3704700218170017804 +:10B5900009090901017000214170C17001717047F2 +:10B5A00070B50D460022032100F0BEFB040004D15B +:10B5B000FF2041A1CF300FF0CEFDA0786906C00971 +:10B5C000C001490E0843A07070BD704710B5014618 +:10B5D000012001F012F810BD3EB58DB2002203210A +:10B5E000284600F0A1FB040004D1FF2032A1E43082 +:10B5F0000FF0B1FD2078694600090001207002209B +:10B60000087039488880C88000222846FDF741FA32 +:10B610003EBDF7B505460078002700090C463E46BA +:10B62000012804D0FF2024A1F3300FF094FD287AE4 +:10B6300003280CD0412020A1C0000FF08CFD0298FF +:10B64000002C068001D0278066800020FEBDEA899C +:10B65000702710460A3086B2002C0AD06888A08075 +:10B66000A8892081E28020460A3029690FF0E9FB91 +:10B67000E5E702980680E8E7F8B543680246D9791D +:10B680009C79090221435C7A1E7A25025C88981D08 +:10B690003543241FA14238D11B79022B35D1042D0B +:10B6A00034D0052D3DD0062D34D0402D2DD3061D90 +:10B6B0000F461446284619E07372635C6C3263616E +:10B6C000705F636F72652E6300000000043000003D +:10B6D0007372635C6C326361705F636F72652E635B +:10B6E00000000000680E0020FFFF000000F0E3F9FA +:10B6F00008280AD01120207003202072A581E7813C +:10B7000026616078082108436070F8BD001DFFF7CE +:10B71000D1FEF8BD031D50880A461946FEF771FE9A +:10B72000F8BD001DFFF71AFEF8BD70B50D468CB0D0 +:10B7300006460022032100F0F7FA040031D02078F9 +:10B740000007000F01282ED0122069468874607807 +:10B750000523801CC874082088822888C8826888CD +:10B760000883A8884883E888888302A90C2001916F +:10B7700000901A4621463046FFF791FD00280ED171 +:10B78000F02300223146012000F090FE20780009CD +:10B790000001401C20706078801C607000200CB09C +:10B7A00070BDCB48FBE71120F9E770B50D468CB0B2 +:10B7B00006460022032100F0B7FA040006D02078E4 +:10B7C0000007000F012803D00820E8E7C048E6E79B +:10B7D0001321684681746178C17402218182C58217 +:10B7E00002A906200523019100901A462146304601 +:10B7F000FFF755FD0028D2D1207800090001207004 +:10B800000020CCE7F3B581B00D460022032101985A +:10B8100000F08AFA00260446002803D1AD49AE485C +:10B820000FF099FC2079A8423BD2AB48A949401CB3 +:10B830000FF091FC35E0E07841000F19401C797958 +:10B84000C0B20091E070092801D10020E070207999 +:10B85000401E2071B879C00708D0009801990428CB +:10B8600015D09C49822018310FF075FCB87900077B +:10B87000410F08D0400F019904280CD095498F2022 +:10B8800018310FF068FC009807280AD107E0084635 +:10B89000FEF74CFEEAE70846FEF713FEF3E7761CD8 +:10B8A000F6B228466D1EEDB20028C4D13046FEBD6A +:10B8B00010B50022032100F037FA040004D1B520AE +:10B8C000844980000FF047FCE07821794018C0B22D +:10B8D000E070092801D30938E07000202071A078B9 +:10B8E00080210843A07010BDF8B517460D46002210 +:10B8F000032100F019FA040005D0002D0CD0002F10 +:10B9000007D0062006E0072D01D00620F8BD032051 +:10B91000F8BD0820A84204D86F486E4942300FF0A5 +:10B920001AFC29462046FFF795FC0646002F28D032 +:10B93000002E26D1E07821791CE0420012195379BB +:10B94000072B03D093791B075B0F04D0401CC0B2B8 +:10B9500009280CD00CE0400000198079F123184030 +:10B960006B071B0F1843907100290AD104E00020D7 +:10B97000491EC9B20029E0D1574856495A300FF044 +:10B98000EAFB3046F8BDF8B50D460022032100F071 +:10B99000CBF9040004D150484E4968300FF0DBFB6E +:10B9A000681E052804D34C484A4969300FF0D3FB80 +:10B9B0000921E2782079002310E0560036197779C2 +:10B9C000AF4206D1B17949084900B1715B1CDBB2C5 +:10B9D0001146521CD2B2092A00D100220646401E4E +:10B9E000C0B2002EE9D1092905D248000019817999 +:10B9F0000122114381711846F8BD10B50446402854 +:10BA000001D2072010BD00F056F8082802D03120DE +:10BA1000000210BD0021314802E0491C082903D270 +:10BA20004A00825A002AF8D1082903D0490044521A +:10BA3000002010BD042010BD10B5402801D2072001 +:10BA400010BD00F038F8082805D00021234A400036 +:10BA50001152084610BD052010BDF0B58BB016463A +:10BA60000C00074607D0002E05D06188402904D27B +:10BA700007200BB0F0BD1020FBE72088002801D084 +:10BA8000172801D90C20F4E7084600F014F808281C +:10BA90000FD0258803A82A46314602300FF0D1F98D +:10BAA00001A8009062882B4607213846FFF73DFC2D +:10BAB000DFE70520DDE701460020084A02E0401CE0 +:10BAC000082803D24300D35A8B42F8D170470000B4 +:10BAD00002300000B8B60000AD020000680E002081 +:10BAE00000B51E2827D00FDC0C2820D008DC03006E +:10BAF0000FF052FC0913211521211B1B17192100DE +:10BB0000122818D1072000BD302814DD3A38030070 +:10BB10000FF042FC030F11091100002000BD214865 +:10BB200000BD042000BD0D2000BD0F2000BD082079 +:10BB300000BD112000BD032000BD10B50C4604F06F +:10BB4000A0F800281ED0204602F013FE002816D0D0 +:10BB500022780E2A0DD00F2A0BD0022A09D0032AF0 +:10BB600007D0102A09D010A17E200FF0F4FA00208F +:10BB700010BDA078FFF7B4FF10BD112010BD0AA1C1 +:10BB80008420F2E708A18A20EFE710B502F0A2FCBA +:10BB900010BD10B502F0EDFD10BD10B502F01AFD9C +:10BBA00010BD0000023000007372635C686F737434 +:10BBB0005F6863692E630000F8B5054606ACC1CC2A +:10BBC000E44C21706270A370E070681C4208277119 +:10BBD0005200E14B66710021880000198446026220 +:10BBE000605C40008218002D0AD0002005E0664607 +:10BBF0004700366A401CF353C0B2665C8642F6D8F2 +:10BC0000491CC9B20629E7D30026D21C9708B00008 +:10BC1000BF0000198760304600F02AF9A15D761C4C +:10BC20004843C219F6B2062EEFD3501B80B2F8BDBE +:10BC3000F0B504468C46C7490020A500FF23024604 +:10BC40006D18C54E0C5D0BE02F6A5100795AB14258 +:10BC500004D1401CC0B2FF2B00D11346521CD2B2FB +:10BC60009442F1D8002801D061460B70F0BD70B548 +:10BC7000B84C0023655CA678B54200D10346890024 +:10BC800009199D420AD90C6A5E00A45B844202D164 +:10BC90001370012070BD5B1C9BB2F2E7002070BDE9 +:10BCA000FFB583B00C9C1F460D46060009D0002D41 +:10BCB00007D0F01C80088000B04204D0102007B0EC +:10BCC000F0BD0E20FBE70598A04201D8A74201D99C +:10BCD0000720F4E701460094019423463A460020E9 +:10BCE0000294FFF769FF2988814207D0814201D27F +:10BCF000042100E0092128800846E0E7009401942F +:10BD000023463A46029430460599FFF755FF2880AE +:10BD10000020D4E710B5044600F0B4F8002801D0A4 +:10BD2000E0B210BDFF2010BDF8B505468A481646A2 +:10BD30000C46854201D0062C01D30020F8BD002717 +:10BD400069460F7028466A462146FFF790FF002893 +:10BD50000DD068460178204600F09CF8002EEDD00A +:10BD60000028EBD12146284600F0A0F8F8BD38465F +:10BD7000002EF7D1F8BDF8B505460C460020764EEA +:10BD80006946764F0870B5423BD0062C01D3072098 +:10BD9000F8BD0A4621462846FFF769FF002830D043 +:10BDA00068460178204600F075F823000FF0F4FA99 +:10BDB000060404090C11161B01462846FEF742FA38 +:10BDC00015E0FDF735F812E001462846FFF7FDFBC8 +:10BDD0000DE001462846F7F7E4FE08E00146284654 +:10BDE000F9F73AFB03E05EA17C200FF0B4F9594A61 +:10BDF0006846A10000788918096A40000E520020A8 +:10BE0000F8BD3846F8BD5A4A1268914201D2102056 +:10BE10007047062801D30720704708720020487237 +:10BE20007047F8B5044652480068844201D2102099 +:10BE3000F8BD207A474A83009B18617A464D125C10 +:10BE400011E01E6A4F00F65BAE420AD04A1C6272D5 +:10BE50001A6A4B00D25A228000F01CF86060002061 +:10BE6000F8BD491CC9B28A42EBD861720520F8BD01 +:10BE70000EB5404B40000ECB0091029301926946F3 +:10BE8000085A0EBD33498978814201D90120704793 +:10BE90000020704770B50C460546FFF7E9FF2D4AB4 +:10BEA000A900891889686043401870BDF8B5044638 +:10BEB0000E4600206946087005462046FFF7E2FF5F +:10BEC000002803D126A1F3200FF045F92148214B8A +:10BED000815D8278B000C718914209D1E0B269460D +:10BEE0000870396A4000085A1B49884206D02EE083 +:10BEF00069463046FFF79CFE002828D06846007847 +:10BF0000396A40000C52684601783046FFF7C2FF9C +:10BF1000054633000FF040FA060404090C0F14170D +:10BF200029462046FEF760F911E0FCF75EFF0EE0BF +:10BF3000FFF72BFB0BE029462046F7F7F9FD06E05B +:10BF4000F9F783FA03E006A162200FF004F928460E +:10BF5000F8BD0000780E0020FFFF00000230000056 +:10BF60007372635C686F73745F636D2E63000000AF +:10BF70002800002028B401008107C90E002808DA33 +:10BF80000007000F08388008C24A80008018C06986 +:10BF900004E08008C04A800080180068C84000069D +:10BFA000800F7047BD4948788978884201D3401A8C +:10BFB00002E02122511A0818C0B27047B749233154 +:10BFC00048788978884201D3401A02E02122511A28 +:10BFD0000818C0B27047B14946314878897888421C +:10BFE00001D3401A02E02122511A0818C0B270474A +:10BFF000A94910B50C310868FF22120290430122B2 +:10C00000D20310430860A54900202331487088708E +:10C01000233948708870463148708870A04806F00F +:10C02000BCF89F48401C06F0B8F8F6F7A3FB00F0F8 +:10C0300028F910BD20207047B4E770B50C460546BE +:10C040000026FFF7AFFF9549A04214D30A46203AD5 +:10C0500000232046641EE4B200280BD08878105CD0 +:10C06000287088786D1C401CC0B288702128F0D1DF +:10C070008B70EEE7012600F004F9304670BD2020F9 +:10C0800070479BE770B50C4605460026FFF796FF04 +:10C0900082492331A04214D30A46203A0023204685 +:10C0A000641EE4B200280BD08878105C2870887871 +:10C0B0006D1C401CC0B288702128F0D18B70EEE757 +:10C0C000012600F0DEF8304670BD2021017000200E +:10C0D000704710B50446FFF77EFF2070002010BDAA +:10C0E00070B50C460546FFF776FF6C494631A04215 +:10C0F00015D30A46203A00232046641EE4B20028E5 +:10C100000BD08878105C287088786D1C401CC0B2F9 +:10C1100088702128F0D18B70EEE7002400E0614C9C +:10C1200000F0AFF8204670BD70B50C4605462129D9 +:10C1300004D9FF205CA147300FF00DF85548406846 +:10C14000103840B2FFF718FFC6B20D20FFF714FFFA +:10C15000C0B2864207D2FF2053A14D300EF0FBFF44 +:10C1600001E0F6F74AFB21462846FFF766FF002864 +:10C17000F7D070BDF8B507464948484C401E474EB9 +:10C180000078254646362335002806D1A9786878F8 +:10C19000212200F06BF800280ED0A17860782122CF +:10C1A00000F064F8002814D0B1787078212200F0F3 +:10C1B0005DF8002828D033E038496878C91C0F544E +:10C1C0006878401CC0B26870212829D100206870AE +:10C1D00026E03249607820390F546078401CC0B2A4 +:10C1E0006070212801D1002060702D4F7F1E3878AB +:10C1F000002815D0A1786078212200F037F80028B7 +:10C200000ED0002038700BE02449707826310F548E +:10C210007078401CC0B27070212801D1002070706D +:10C22000A9786878212200F021F800281DD0A17893 +:10C230006078212200F01AF8002816D0B1787078C2 +:10C24000212200F013F800280FD0F6F7B8FA1448AE +:10C2500005F0ABFF01214903884203D016A1C1209C +:10C260000EF079FF0E4805F0B8FFF8BD401C88427B +:10C2700005D0904201D1002901D000207047012053 +:10C28000704710B5064805F090FF002801D1F6F779 +:10C2900085FA10BD00ED00E000E400E0F00E0020A3 +:10C2A00069000020072000007372635C736F635F96 +:10C2B00072616E642E6300007372635C736F635F00 +:10C2C00072616E642E630000FEB5F54C074660682F +:10C2D000FF213E0181552178FF2913D00901083142 +:10C2E00041583246491E083209020192090A805813 +:10C2F00000F0CCF9002802D02478254615E06168CA +:10C30000207888552770FEBDE5484268019811588D +:10C31000280100900830105800F0B8F9002806D124 +:10C32000DF482C46416800980D5CFF2DECD1DC48BD +:10C330002101406885554754FEBD70B5D84A044672 +:10C340000020157A53680AE00201561C9E5DA64241 +:10C3500003D10C329A588A4204D0401CC0B28542A4 +:10C36000F2D8FF2070BDF8B5CD4F3E7801F00AFE3F +:10C370000146FF2E68D034012546786808354059BB +:10C3800000F084F9022802D9786840595AE0C4497B +:10C390004868025D0A70A11C425C002A0CD0521E43 +:10C3A000425441590122D20589180902090A415112 +:10C3B0003046FFF789FF30E0631CC25C0092221D0B +:10C3C00094468258002A10D001239B029A420FD92A +:10C3D0009205920D43595703DB191B021B0A435167 +:10C3E0006346C3589A1A920A09E0FF21C1540AE031 +:10C3F000435952039A181202120A4251002242541F +:10C400003046FFF761FFA6480C344168C2680098C7 +:10C4100009598000125800989047A14C2078FF28B5 +:10C4200012D001F0AFFD01462078626800010830AB +:10C43000105800F02BF9012896D920786168000186 +:10C440000830085801F091FDF8BDF8B51C461546B6 +:10C450000E460746FF2B03D392A1D3200EF07BFE9E +:10C460008F48FF21C7604560047206740170002286 +:10C470004270104604E00201521C401CA954C0B294 +:10C48000A042F8D3F8BD70B5854C06466578207C8F +:10C49000854203D383A1E6200EF05DFEE068A9008B +:10C4A00046506078401C6070284670BDFFB581B072 +:10C4B0001D46FF2401F066FD794F06467978019804 +:10C4C000814203D877A1F4200EF045FE7448002184 +:10C4D000037A406810E00A019446521C825CFF2AED +:10C4E00024D0019FBA4205D162460C328758029A85 +:10C4F00097421DD0491CC9B28B42ECD8FF2C17D0F3 +:10C5000021014B1C019AC2540B33029AC250039B67 +:10C51000634F0022012B0ED00B1DC25001239B0242 +:10C520009D4216D9AA05920D08D008E00C46E1E715 +:10C53000FF2005B0F0BD0B1DC550EFE71A465303B1 +:10C540009B190E461B0208361B0AAA1A8351920A2F +:10C5500009E0002D00D101256B039B191D022D0A56 +:10C560000B460833C550891C42543D463E78204650 +:10C57000FFF7AAFE2878B04217D001F003FD01466C +:10C5800028786A6800010830105800F07FF8012808 +:10C5900007D92878696800010830085801F0E5FCDF +:10C5A00003E001F010F9F5F7AFFE0198C1E770B5AF +:10C5B0000C46054601F0E6FC064621462846FFF7F4 +:10C5C000BCFEFF2817D0364D0401204669680830AC +:10C5D0000858314600F05AF80121090340186968EB +:10C5E000A41C095D400B002901D08902081800280D +:10C5F00000D1012070BD002070BDF3B581B00F46A1 +:10C600000198FFF79AFEFF282AD0254D2E786968F9 +:10C610003246344604E0844205D026462301CC5CF1 +:10C62000FF2CF8D11CE0FF2C1AD0A64221D110011A +:10C63000085C2870FF281AD001F0A4FC2A78014673 +:10C64000120168680832805800F020F8012809D9E2 +:10C650002878696800010830085801F086FC08E075 +:10C660000020FEBD01F0AFF8F5F74EFE01E001F04D +:10C6700084FC39460198FFF79AFF22016968FF237D +:10C68000541C0B558A5C3301CA54FEBD401A00028B +:10C690000121000AC905884200D900207047000026 +:10C6A0003C0F00207372635C736F635F74696D6528 +:10C6B000722E6300F0B500241C4A01211C4B0803B4 +:10C6C000546018601B4B1C601B4C20601B480469A5 +:10C6D000E443E406E617046910252C430461184C72 +:10C6E0006160184D2960761C00E020BF1F68002F94 +:10C6F000FBD0002E03D107691026B743076190686D +:10C700008005906801D5104A10436960A16000213E +:10C7100019600121084A09031160F0BD10B50446F3 +:10C72000FFF7C8FF2060002010BD000000C50040DA +:10C7300080E100E000C1004080E200E000ED00E0A8 +:10C7400000C3004000C0004000FCFFFF70B51F495F +:10C750000A68002A17D000231D4601244A68521C8B +:10C760004A60092A00D34D600E792246B2400E6815 +:10C7700016420AD072B60B6893430B6062B64968E2 +:10C780000160002070BD052070BD5B1C092BE5D346 +:10C790000FA136200EF0DFFCF5E7012010498005DF +:10C7A00008607047EFF31081CA07D20F72B60121FB +:10C7B00081400648036819430160002A00D162B62F +:10C7C000EBE70248002101604160704770000020E3 +:10C7D0007372635C736F635F6576742E6300000031 +:10C7E00000E200E001208107086070470120810716 +:10C7F000486070471048C068C00700D001207047EB +:10C800000D488068C00700D0012070470A48406981 +:10C81000C00700D0012070470748C069704706492B +:10C820008A69D20306D589698907890F814201D1B6 +:10C83000012070470020704700040040F8B5F74C15 +:10C84000207EE17D88421CD00126F54D0027E07D49 +:10C85000215C14200A4642435019037C052B11D059 +:10C86000037C062B1CD0037C072B28D0437C012B98 +:10C8700033D0ECA1EE480EF06EFC207EE17D8842C4 +:10C88000E5D1F8BD0674E07D162807D0E07D401C98 +:10C89000E075491CC8B2AA5802210CE00020F7E755 +:10C8A0000674E07D162808D0E07D401CE075491C28 +:10C8B000C8B2AA5803219047DFE70020F6E70674C4 +:10C8C000E07D162807D0E07D401CE075491CC8B209 +:10C8D000AA580821EFE70020F7E74774E07D162803 +:10C8E00007D0E07D401CE075491CC8B2AA5807215A +:10C8F000E1E70020F7E770B50024CE4E0C207072FF +:10C90000CD4825464473047328300476C475CB485B +:10C9100005F043FCCA480575F572CA49601E886077 +:10C920007571B570F57035717570C748E839057067 +:10C9300045701420604340180574641CE4B20B2C4D +:10C94000F7D30120F5F7E0FF0020F5F7DDFF012028 +:10C95000B071F5F7A3FCBD48F5F7B2FCBC4C2070F4 +:10C96000BC48F5F7ADFC6070F5F76EFF70BD10B513 +:10C97000F5F795FFB64C2078F5F7C0FC6078F5F731 +:10C98000BDFCAC4C207A002803D0F5F746FD002012 +:10C99000207210BD70B5A74CA079002804D0A1A1C9 +:10C9A000AD480EF0D8FB70BDE07A002803D19DA100 +:10C9B000AA480EF0D0FB0126A6710025E572607A28 +:10C9C000042114225043964A801801749D488168BE +:10C9D000491C04D0691E81600120F5F795FF0020F5 +:10C9E000F5F792FFF5F776FF05F018FDF6F777F803 +:10C9F0009B480560056001209A49C0030860F6F76E +:10CA0000EDF891480078022804D0032804D1E0789A +:10CA1000002801D0A67000E0A570F6F74CF870BDB4 +:10CA200003467F490B20142242435218203A127FBA +:10CA3000002A04D0401E0006000EF4D170471422D4 +:10CA4000424351180A46803AD366012220390A77B8 +:10CA50007047012805D0032805D1002903D1002003 +:10CA600070470029FBD010B4724C00236370764AE3 +:10CA7000002890700CD002280AD007291AD208008A +:10CA800078440079001887441505070D0F1113002D +:10CA9000D37003E01B2000E03A20D07001206070CA +:10CAA00010BC70475820F8E77720F6E79620F4E7A7 +:10CAB000B520F2E710BC0020704710B562484078FE +:10CAC000F6F714F880B210BD411E1422504310B581 +:10CAD000534A8418203C0A2902D8207F002803D119 +:10CAE00050A161480EF037FB207F012804D0B3200D +:10CAF0004CA180000EF02FFB0020207710BD70B5F8 +:10CB00004D4C607B217B884201D1012500E000254E +:10CB1000F5F785FFF5F7EAFF617B227B914201D1B2 +:10CB2000012100E00021A942EBD170BDF7B5064616 +:10CB3000481E84468EB0C0B2142205905043384A35 +:10CB400085180495287C2D1D07282AD1334C0027F1 +:10CB5000E07D227E824221D0235C059A934201D15E +:10CB6000012701E0002F04D0162811D0421CA25C3E +:10CB7000225416280ED0401C227EC0B28242EBD135 +:10CB8000002F0BD0207E002806D0207E401E04E01F +:10CB90000022ECE70020EFE716202076049801221F +:10CBA00002746046234C0A2813D8142041431C48C1 +:10CBB00008182038007F00280BD00498007C01283A +:10CBC0000BD00498007C012803D01098807A0128AB +:10CBD00007D014A125480EF0BEFA1098807A0128DB +:10CBE0006DD104980E4B007C022843D00B4C207E64 +:10CBF000162870D0207EE17D401C884203D109A117 +:10CC00001B480EF0A8FA049901204874217E05986B +:10CC10006054207E162862D063E0000038110020A6 +:10CC2000541100207372635C72656D2E6300000006 +:10CC3000D40500005C1200201011002068120020B2 +:10CC4000201100203C1200207A00002067C3000061 +:10CC5000780000203DC800007D0200005E02000058 +:10CC600000F5004080E200E0CB0200001503000068 +:10CC700022030000607A059A0146904206D00146E0 +:10CC800014277843C018807C9042F8D1627A82429F +:10CC900008D1617A14225143C918897C617201213B +:10CCA000A17207E014224243D21814277943927CE0 +:10CCB000C9188A7414220C215043C018817410982A +:10CCC000007A06281DD201007944097949188F4459 +:10CCD0000C161412100EE07D002890D093E700206F +:10CCE00001E0207E401C2076B5E000210FE0B42159 +:10CCF0000DE073210BE0322109E00A2107E0062153 +:10CD000005E0FF20FDA1E0300EF025FA002110988B +:10CD100002910068401A28601099097A002912D0FF +:10CD20000221401A0102090A29601098026840682D +:10CD300010180002000A68601098807A0228109883 +:10CD400003D0007B71E00421EBE7007A002812D0C9 +:10CD500002220298121810984368104610301818D2 +:10CD60000A90E948029B4078984202D9E378002B68 +:10CD700003D00A9805E00422EBE7029BC31A0A9845 +:10CD80001818637A10300C2B1CD0637A14277B435D +:10CD9000DE4FDB195B68994214D0DD4F617ABC46E7 +:10CDA00014235943D94BC9184B6889689B1B891BAD +:10CDB0001B0209021B0A090A984237D8634535D875 +:10CDC000614533D831180A980123081A0002000A75 +:10CDD000286010998018C9680002000A471ACD4AD5 +:10CDE0009B05BC469F4201D2384610E00F1A9F4275 +:10CDF00001D260460BE0944503D9511A0818401C33 +:10CE000005E0974206D9101A4018401C40420028FD +:10CE10005FDC03E0B9A1C0480EF09DF929680A98CB +:10CE200008180002000A686000202872686810274D +:10CE300010300002000A68601098407AA8721098BA +:10CE4000007A687203280ED200280CD0FFF7D2FCBB +:10CE5000002803D007E0002011B0F0BD0298422165 +:10CE60000F1A32200290A8490878012801D003281F +:10CE700009D148780299884205D9E178002902D180 +:10CE80000299401AC7196B6828689B1B801B9C4637 +:10CE900001021B029E4A090A1B0A8F4219D8174633 +:10CEA000914216D8BB4214D8617A0C2915D0677A02 +:10CEB00061460C22039200921422944B7A43D218BA +:10CEC00093689B1B834216D80397977C0C2FF3D152 +:10CED00073E0059801F04CF9BDE70498022205992A +:10CEE0000274627A0C2A00D0627A82746172012024 +:10CEF000A07211B0F0BD0C2F5FD0002238469446CE +:10CF00001422824B4243D21853689B1B8B4225D27A +:10CF1000907BAB7A98421BD804980521059D01743B +:10CF20007E4C207E16280FD0207EE17D401C88425A +:10CF300003D172A17A480EF00EF9207E2554207E8E +:10CF4000162800D0CDE6CAE6E07D0028F1D0F4E74F +:10CF500001208446907C0C28D2D102E06146002951 +:10CF60002AD03D46009014202A46424367480621B5 +:10CF7000161831741C38007E1628684816D0017EB9 +:10CF8000C07D491C814203D15CA166480EF0E3F8E4 +:10CF90006248017E4554017E16290BD0017E491C52 +:10CFA0000176B57C0098A842DDD106E0C07D00285E +:10CFB000EAD0EDE70021F3E7009704990220534DF2 +:10CFC0000874607AB84207D104990098887405986B +:10CFD00060720120A07221E003980C2F0FD00C2862 +:10CFE00003D146A150480EF0B6F8039814225043DE +:10CFF0004019059981740499009888740EE00C28F2 +:10D0000003D13EA149480EF0A6F8039814225043DC +:10D0100040190599817404990C208874012011B07D +:10D02000F0BD70B50D46424A441900210B46101A56 +:10D030008B4103D231A13F480EF08DF83E48854226 +:10D0400003DD2EA13D480EF086F83D48854203DA07 +:10D050002AA13C480EF07FF83B48844205DA002CB8 +:10D0600001DB204670BD384800E03848201870BD0C +:10D07000401E70B5C0B21421484324494418607B57 +:10D08000062813D201007944097949188F44020C0B +:10D090000A080604002067E0B42010E073200EE0C8 +:10D0A00032200CE00A200AE0062008E0FF2013A14D +:10D0B000E0300EF050F8617B0020002954D00221AE +:10D0C0004018616840180002000AF5F70FFD0C25B2 +:10D0D0006557174A441900210B46101A8B4103D299 +:10D0E00006A114480EF037F81348854203DD03A16A +:10D0F00012480EF030F81248854229E07372635CE2 +:10D1000072656D2E630000007A000020541100202B +:10D11000FFFF3F00FFFFFF00130700003811002052 +:10D1200007020000C5030000DD030000E303000068 +:10D13000FF7F841EF50300000020A107F603000016 +:10D1400000E05EF8F70300000080841E00807BE1B1 +:10D1500003DAF749F7480DF0FEFFF748844207DA93 +:10D16000002C03DB204670BD0421A9E7F24800E053 +:10D17000F248201870BDF0B5064683B0F048019023 +:10D18000457A029534687068001B0702ED483F0A33 +:10D19000001B00900C2D2DD0142029464143EA4855 +:10D1A0000122081884464168E64892058646081B15 +:10D1B000904210D3631A93420DD3024670467245D3 +:10D1C00003D900984018401C05E073450ED9411A58 +:10D1D0000819401C404200280CDA60460295857C04 +:10D1E0000198C0790028D5D003B0F0BDD049D74808 +:10D1F0000DF0B1FF0298854226D014214843D24950 +:10D200000123401802908068CE499B058C46011B83 +:10D210008646994210D3221A9A420DD3634661453D +:10D2200003D900997144491C06E0194662452DD97D +:10D23000091A0819401C4142002905DD0298B17AFB +:10D24000807B814200D374460C2D15D0BE4914203A +:10D25000454368184268121B1202120ABA420BD2E6 +:10D26000B37A827B934200D38468857C0198C0792D +:10D270000028B9D10C2DEAD13068A042B4D0E01911 +:10D280000002000A3460706003B0F0BDA849AF48E6 +:10D290000DF061FFD8E7F0B5AD490446486885B0A8 +:10D2A000C005C00D1CD0103840B200280CDA0207AF +:10D2B000120F083A920892005118C9698007C00EEF +:10D2C000C1400806800F09E08108A24A8900891838 +:10D2D00009688007C00EC1400806800F002808D0EA +:10D2E00000272078002806D0012804D0002005B0AF +:10D2F000F0BD0127F5E72079062813D20100794413 +:10D30000097949188F44020C0A080604002018E025 +:10D31000B42010E073200EE032200CE00A200AE076 +:10D32000062008E0FF208249E0300DF014FF21794B +:10D330000020002905D002214618814D002F02D07F +:10D3400003E00421F8E70020E871694602AAA0681A +:10D35000F5F7D6FB694608228A56E06801A98018CD +:10D360000122C01C1F2801DA019209E003AAF5F787 +:10D37000C7FB6846007B002802D00198401C019042 +:10D3800000990198401810300002000A0190881B93 +:10D390000002000A00906079694688720098039044 +:10D3A000F5F73DFB009A019B121A181A6A491202FE +:10D3B0000002120A000A8A4216D8884214D8684627 +:10D3C000FFF7D9FE00990398814205D08819000221 +:10D3D000000AF5F78BFBA0600120E979002986D0CF +:10D3E000002FB0D005B0F0BD0020F6E7F3B58FB048 +:10D3F0005A480C460B9004F0D8FE594A0F99504FEA +:10D400005618584D203E00280BD05748007D002864 +:10D4100003D056A158480DF09EFE207801287CD0FC +:10D420005AE1687B16280CD0687B297B401C884217 +:10D4300003D14EA151480DF08EFE2078012804D072 +:10D440000CE0287B0028F4D0F7E7F07F002803D019 +:10D4500046A14B480DF07FFE0120F077697B0F98C5 +:10D460001422484E5143891908742078022822D08A +:10D47000687B142148438619207930726079707274 +:10D4800032460C323146A068F5F73AFB0C20305694 +:10D490000F2804DD1F3830733068401C30600C21C9 +:10D4A0007156301DE26801905018C01C1F283EDAEA +:10D4B00001200199F7E026494868C005C00D21D038 +:10D4C000103840B200280CDA0207120F083A92080E +:10D4D00092005118C9698007C00EC1400806800F2C +:10D4E00009E081081B4A8900891809688007C00E75 +:10D4F000C1400806800F002804D105201BA10002AE +:10D500000DF029FE687B1421484386190021E0684C +:10D510006A460691117006A900E0D3E0F5F7F0FA2B +:10D520006A46002010560F282EDD01202DE0AEE0C7 +:10D53000FCD00000F70300000080841E00807BE127 +:10D540005C120020FFFFFF005411002013070000B1 +:10D5500000ED00E000E400E0FFFF3F006812002063 +:10D560003012002010110020201100207372635C23 +:10D5700072656D2E6300000011050000EF040000CD +:10D58000F4040000500F0020002006994018079076 +:10D590000220B0722079307260797072A068311DFB +:10D5A000C01C06911F2801DA012009E0F5F7A8FA4E +:10D5B00068460078002804D0069806990068401C48 +:10D5C0000860307A062813D2010079440979491895 +:10D5D0008F44020C0A08060400200FE0B4200DE07E +:10D5E00073200BE0322009E00A2007E0062005E066 +:10D5F000FF20FE49E0300DF0AEFD0020217900292A +:10D6000043D002214018069071681030081807991D +:10D61000089009180698081A0C900020F871F5F780 +:10D62000FEF904463060079820180002000AF060F6 +:10D63000787A0C2825D0797A14204143EC480818D0 +:10D6400040680899029040180002000A0390707A1E +:10D650006946887402A8FFF78EFD0299039A091B98 +:10D66000121B09021202E34B090A120A0C98994292 +:10D6700007D8824205D80299069808180002000AC5 +:10D680003060F8790028C8D110E00421BAE704AA74 +:10D690000199F5F735FA6846007C002804D0019816 +:10D6A00001990068401C08602078B072687B1628D9 +:10D6B00006D0687B401C68730B9804F08EFD47E031 +:10D6C0000020F8E7F07F002804D0A320CAA1C00002 +:10D6D0000DF041FD0120F077CA490F9808742078B9 +:10D6E000022803D1C4A1C8480DF035FDC54E2079EC +:10D6F00030726079707232460C323146A068F5F7AC +:10D70000FFF90C2030560F2804DD1F3830733068C5 +:10D71000401C30600C22B256301DE1680190881820 +:10D72000C01C1F2802DA012001990BE003AA01990D +:10D73000F5F7E6F96846007B002804D001980199C6 +:10D740000068401C08602078B072AE49012008755E +:10D75000687B297B884224D07C7A0C2C23D0F5F777 +:10D760005EF914214C43A24961180A7C042A18D09E +:10D770000A7C032A15D04B6889681B1A081A1B02F9 +:10D7800000029C4A1B0A000A102B0AD3114693423E +:10D7900007D8884205D8687B297B884201D0F5F7F5 +:10D7A0008AF911B0F0BD687B297B8842F7D111B0AE +:10D7B000F0BD10B50020F5F794F810BD10B50120AC +:10D7C000F5F78FF810BD914800787047F1B50098D3 +:10D7D00002281ED08E4C607A0C2803D186A18D4879 +:10D7E0000DF0B9FC0026A6710125E572607A0321CF +:10D7F00014227F4F5043C0190174F5F761F9009866 +:10D8000000280BD001282AD003287AD07AA1824898 +:10D8100045E07E480078F4F777FDF8BD7F48007F4B +:10D82000002804D02B2074A140010DF094FC6571F8 +:10D830007A4D00202E60F5F767F8A968481C04D0DF +:10D84000012300221846F5F795F8607A617A401CAA +:10D85000C0B2142251437A5801219047F8BD0120EB +:10D86000F5F752F8607900280DD06C488068401CAC +:10D8700009D0607A617A401CC0B2142251437A58B0 +:10D8800006219047F8BD6548007F01280AD002288C +:10D8900012D0032822D0042834D057A160480DF0BC +:10D8A0005AFCF8BD2079002803D02671F5F70DF950 +:10D8B000E5705A480677F8BD207A002802D1F4F7BF +:10D8C00083FD2572607A617A401CC0B214225143F4 +:10D8D0007A580021904751480677F8BD4F4F0123F1 +:10D8E000397B78680022411A1846F5F743F8207909 +:10D8F000002803D02671F5F7E8F8E57002203877A4 +:10D90000F8BD19E0454E217870680123411A0022C4 +:10D910001846F5F72FF8207A002802D1F4F754FDC5 +:10D920002572607A617A401CC0B2142251437A5841 +:10D93000002190473577F8BD607A617A401CC0B20B +:10D94000142251437A5805219047F8BD10B5304C48 +:10D95000607A0C2803D128A132480DF0FCFB607AD4 +:10D96000617A401CC0B214225143214A525804210A +:10D97000904710BDF0B583B00C200290F5F74FF83A +:10D98000234C0090617A284801900C2920D0617ABC +:10D990001420414316480918097C042918D0617ADB +:10D9A000142251430818007C032879D0019900986B +:10D9B0000B6849681B1A081A1B0200020D4A1B0A51 +:10D9C000000A102B6CD31146934269D8884267D85D +:10D9D00012488068401C03D007A114480DF0BBFB1F +:10D9E00000206071607A0C282AD121E0FCD0000070 +:10D9F00054110020FFFF3F007372635C72656D2E4F +:10DA000063000000201100201E05000078000020A7 +:10DA10005C12002054050000A70500003C12002005 +:10DA20009B050000AE0500004C120020EA05000036 +:10DA30006078002804D0FE48C17841708178017078 +:10DA4000607A0C2815D0607A1421FA4A484380186D +:10DA5000007C04280DD1607A0290607A01211423A1 +:10DA6000584380180174607A58438018807C607233 +:10DA7000A172F14D687B297BF04F884233D0F04E84 +:10DA8000287B142148438019007CC05D0128287B35 +:10DA900007D048438019007CC05D02282FD044E0A5 +:10DAA000FCE1142148438019807A01280AD0287BA0 +:10DAB0000221142250438019007CC155287B16286E +:10DAC00008D009E0287B0021142250438019007CF3 +:10DAD000C1552AE0002001E0287B401C2873687BA8 +:10DAE000297B8842CCD1D74D287D00284DD0287C79 +:10DAF000C15D012928D0C05D022830D03BE0287BE1 +:10DB0000142148438019807A012803D0CEA1D1483E +:10DB10000DF021FB297B00201422514389198872C2 +:10DB2000297B51438919097CC855287B1421484316 +:10DB30008219287B48438019017C0098FEF7F6FF84 +:10DB4000287B1628C8D1C5E7A97A012904D002216B +:10DB5000C155002028750EE00021C1550BE0A87AC0 +:10DB6000012804D0C520B8A1C0000DF0F4FA0020AF +:10DB7000A872297CC855287D002806D0297CB14A86 +:10DB80000098FEF7D3FF0020287502980C281ED0BD +:10DB900014214843A7494018017C012917D10721C6 +:10DBA0000174AD4D287E16283CD0287EE97D401CAE +:10DBB000884203D1A4A1A9480DF0CDFA297E02988C +:10DBC0006854287E162831D0287E401C2876607A3A +:10DBD0000C287DD0A07A00287BD00020A072617A2A +:10DBE0001420414393480E189D49B56873680A464E +:10DBF000F6687C32CB67966055609A4D697E002945 +:10DC000016D00226617A14228A4851430818407BB4 +:10DC100006281BD201007944097949188F440A1457 +:10DC200012100E0CE87D0028C4D0C7E70020CDE715 +:10DC30000426E7E700210FE0B4210DE073210BE09B +:10DC4000322109E00A2107E0062105E0FF2086498C +:10DC5000E0300DF080FA00212973687E022801D09F +:10DC6000012810D12869009A4018821A1202120A5B +:10DC7000422A08D93238032100026976000A286155 +:10DC80003220287308E0322906D2207A00280AD1EF +:10DC9000F4F79AFB012005E0207A002803D0F4F77E +:10DCA000BCFB00202072624910224878207009785D +:10DCB000012901D0032906D101212171297B884244 +:10DCC00001D9421A1032A378002B00D0921C01E037 +:10DCD0008DE09BE02179002901D1002B5DD0944695 +:10DCE000624A00990092019A176852687F1A511A85 +:10DCF0003F0209023F0A090ABC451BD85B4A97420A +:10DD000018D8009A914215D8297B884223D92B69CB +:10DD1000421A9A1A1202120A101880190002000AF6 +:10DD20002A616860002914D0032028770006000EBD +:10DD30003ED14CE000202071A070297B002925D025 +:10DD40002869401880190002000A686002202877BC +:10DD50002EE00120E9E781420BD92A69511889197F +:10DD60000902090A6960002801D00420DDE70220C9 +:10DD7000DBE7002B03D134A13D480DF0ECF9286915 +:10DD800080190002000A6860002004E029698919EE +:10DD90000902090A6960287719E0287B00280FD05A +:10DDA0002969081880190002000A68600220287793 +:10DDB00028690123811900221846F4F7DBFD09E0E8 +:10DDC000286980190002000A686000202877012075 +:10DDD000F4F79AFD607A1421484316490C22401842 +:10DDE0008256012300206968F4F7C4FD0EE001208B +:10DDF000F4F78AFD0020F4F787FDF4F76BFD207A35 +:10DE0000002803D0F4F709FB00202072A078002836 +:10DE100004D0F4F75AFE0020E070A070607800286B +:10DE200004D00348C178417081780170207921E0E5 +:10DE30007A00002054110020101100202F12002021 +:10DE4000500F0020201100207372635C72656D2EEC +:10DE5000630000000C060000381100203A060000A4 +:10DE6000D01100203C120020FCD00000FFFF3F003A +:10DE70008C060000002806D00020CF49E070097809 +:10DE8000002900D12071CD48017EC07D814203D0A0 +:10DE9000CB484078F4F738FA0120E07103B0F0BDC8 +:10DEA000F0B5C84C0746607A83B00C2803D1C6A1F0 +:10DEB000C8480DF050F9607A1421C74E48438019C4 +:10DEC000007C032804D06F20BFA100010DF043F9AE +:10DED000C24DA868401C03D0BBA1C1480DF03BF95E +:10DEE000607A1421484381190C20085600216A46A3 +:10DEF00000911171C01901AA6946F4F701FE6A4642 +:10DF0000042010560F2801DD012000E000200099B8 +:10DF10004018696840180102090AA9606079002860 +:10DF200004D0012300221846F4F724FD03B0F0BD0D +:10DF300070B5AD4CAB4A0B1AA34214D3451AA54297 +:10DF400011D3934203D9101A43185B1C0BE095427E +:10DF500004D9511A0818401C434204E0A349A448BC +:10DF60000DF0F9F80023184670BD10B501460123E5 +:10DF700000220220F4F7FEFC10BD10B50220F4F7D9 +:10DF8000C3FC10BD10B5F4F74AFD10BDF0B58D4DC2 +:10DF90000446E87A83B0002803D18BA195480DF0A0 +:10DFA000DAF8642C4DD3944900200246091B8241C3 +:10DFB00047D39248417B007B814242D19048007D0B +:10DFC00000283ED1687A1421834F4843834EC519F7 +:10DFD000306801AA00196946F4F792FD69460420E9 +:10DFE0000856002802DD0098401C0090A96800989F +:10DFF0006B680A18D21A1202824B120A9A4220D86F +:10E00000AA7C0C2A08D014235A43D2195268511AF8 +:10E010000902090A814214D3B068401C05D00120CE +:10E02000F4F772FC0020C043B06030680019306023 +:10E03000A868009940180002000A7061012003B02E +:10E04000F0BD002003B0F0BDF8B50646401EC5B2D5 +:10E050001420614968434418207C002803D15AA148 +:10E0600069480DF078F86548017B407B81420CD00F +:10E07000664A14234B439B181B7CB3420CD01629D1 +:10E080000CD0491CC9B28142F3D15D48017D002901 +:10E0900064D0007CB04261D10020F8BD0021F1E7DE +:10E0A000217C052905D0217C062902D0217C072965 +:10E0B00028D101212174C17D0023027E8A4221D012 +:10E0C0000246565CAE4201D1012301E0002B04D090 +:10E0D000162911D04E1C965D565416290ED0491C97 +:10E0E000167EC9B28E42ECD1002B0BD0117E0029D6 +:10E0F00006D0117E491E04E00026ECE70021EFE780 +:10E1000016211176617C00292AD06774C17D002315 +:10E11000027E8A4224D0425CAA4201D1012301E05E +:10E12000002B04D0162912D04A1C825C42541629B6 +:10E130000FD0491C027EC9B28A42ECD1002B0FD00D +:10E14000027E0146002A06D00A7E521E04E000220A +:10E15000EBE70021EEE716220A7601E017480027D8 +:10E16000217C01299CD1617C002999D10120F8BD35 +:10E1700070B505461420184A0521684380180174BB +:10E180000E4C207E162811D0207EE17D401C884256 +:10E1900003D116491E480CF0DEFF207E2554207E58 +:10E1A000162807D0207E401C207670BDE07D002818 +:10E1B000EFD0F2E70020F7E77A00002038110020C6 +:10E1C000780000205C1200207372635C72656D2E13 +:10E1D00063000000EF060000541100203C120020F4 +:10E1E000F1060000FF7F841E0020A107FCD0000084 +:10E1F0001307000032070000FF1FA10710110020C5 +:10E2000020110020FFFF3F006F070000500F00208B +:10E210000702000010B509F063FC042803D009F0E0 +:10E220005FFC052803D106F0D1FE00280BD104F0D5 +:10E2300007F9032803D004F009F9032805D109F0F0 +:10E24000B0FD002801D0012010BD002010BDF0B5A8 +:10E2500085B00746002668460D4606726946384670 +:10E2600005F05CFA00287DD16846007800280BD0C4 +:10E2700009F009FDB84275D00022294638460AF057 +:10E28000CCFE00283ED120E006F077FCB842F2D068 +:10E2900000222946384608F01DF900287DD1019C4E +:10E2A0009020005D2834002804D1607E002801D031 +:10E2B000012000E000200490204660300390807828 +:10E2C00006F08AFB002804D008E0019C2834607E18 +:10E2D000F1E7FF20FDA1DA300CF03DFF20462030B1 +:10E2E000417B00290FD0817B89070CD56E700121FD +:10E2F0002970AE70AF80C17BA971218E2981618E9A +:10E300006981467349E0039802A9807806F030FAE3 +:10E31000002804D1FF20EDA1EE300CF01CFF684670 +:10E32000007A002809D06E700D202870AF806846F2 +:10E33000007AE8800120A8702FE0049800282FD0F0 +:10E3400006F0B5FB00282BD068460078002806D1DF +:10E3500001988030406A4188B94200D10670039824 +:10E36000807800E01CE006F0CAF8002803D1D7A1AD +:10E37000DA480CF0F0FE6E700A202870AE70AF80A4 +:10E38000A07EA8716676684605F07EFA002804D063 +:10E39000D248CEA10E300CF0DEFE012005B0F0BD5B +:10E3A0000020FBE77CB5CEA103C9CF4D002401912D +:10E3B0000090AC7001F067FD2946EC7004204039F4 +:10E3C000088710204887C81DC84AF9304280047168 +:10E3D000C280E03844740C7084730475C0300477D4 +:10E3E0001D300522694604460CF02BFD28462146C7 +:10E3F000BC3008F0F7F97CBDF8B5BD4C0D46606047 +:10E40000217006F057F805F0D1F8FFF7CBFF207820 +:10E4100009F03AF9B4498431084681380F46064676 +:10E4200006F08CFC606808F0D8F8284604F06EFC12 +:10E430003946304609F057FC60680AF08AFE01F060 +:10E4400022FDA9480021C170F8BDFEB50E461D464B +:10E45000144601A905F062F9002839D102988030EC +:10E46000807A06F079F800280CD0684606F087F824 +:10E47000002806D0002C03D006F01DF8A04206D2DA +:10E480000020FEBD91A19B480CF065FEF8E70098C6 +:10E4900005F0AAFB3146009805F0ABFBE2B2294635 +:10E4A000009805F063FD06F08FF8002804D191482C +:10E4B00086A11E300CF04FFE68460079012807D176 +:10E4C00001A801F0E7FC8A48002180688030418281 +:10E4D0000120FEBD30B40179002904D0012907D004 +:10E4E00030BC00207047831D42880488022103E06D +:10E4F00042880488831D0121204630BCA5E7FFB572 +:10E50000794C85B00E460746C0346088694608805D +:10E51000154602A905F002F9002811D0002168462D +:10E5200005F059F9002823D1684602A9008805F0B2 +:10E53000F5F8002804D06F4864A13C300CF00BFEC5 +:10E5400068460088388068460088608066480021F8 +:10E55000C23005F040F9002802D00020C04360809E +:10E5600003988030807A06F037FA002803D007E05D +:10E57000002009B0F0BD5F4854A156300CF0EBFD0F +:10E5800004A806F03CFA0028F3D0049805F068FBD4 +:10E590003070022807D0012805D056484BA17230B0 +:10E5A0000CF0D9FDE4E70899049805F0F6FC288002 +:10E5B000002804D14F4845A165300CF0CCFD06F091 +:10E5C00045FA002804D1E92040A180000CF0C3FDE9 +:10E5D0000120CEE73EB50446831D02AA694601A884 +:10E5E000FFF78DFF002813D068468088208068469A +:10E5F000008960800020607168460078012808D09A +:10E60000022806D03B4831A192380CF0A4FD01202D +:10E610003EBD2071FBE7FEB5040004D135482BA1B7 +:10E620007E380CF098FD304D0026203D687C002897 +:10E6300008D0667010202070A87CA070E87CE07084 +:10E640006E7430E0284F403F3878002808D02C22E4 +:10E65000B91C20460CF0F5FB0E2020703E7022E025 +:10E66000A87B002809D00120E070E87BA070287CFE +:10E6700060700F202070AE7315E01B480221C63079 +:10E68000029005F0A8F8002871D1174FC037F8881C +:10E690000190F888042808D0052831D02146FFF7DA +:10E6A000D6FD002859D00120FEBD0021204606F0ED +:10E6B00019FA0028F7D1287D00284ED06670132063 +:10E6C00020701C21A01C0CF019FC15E07372635C17 +:10E6D0006C6C5F6374726C2E630000000D020000AE +:10E6E000FFFFFFFF1F000000AC120020FFFF000033 +:10E6F00080000020390300000220A0702E75D2E7B0 +:10E700000021204609F098FA002826D02078132806 +:10E71000C9D1A0783C28C6D1A088694604F07CFF06 +:10E72000002803D0FD49FE480CF015FD009880300C +:10E73000807A05F0E4FE002804D1F948F749001D6D +:10E740000CF009FD009804F09FFF0028ABD0F448BE +:10E75000F24908300CF0FFFCA5E70221029805F011 +:10E760003AF8002803D1F9880198814291D100201C +:10E77000FEBD50E710B508F011FF002804D0E848AE +:10E78000E649BE300CF0E7FC07F01FFF06F09AFAEE +:10E7900004F07AFA002804D07920E049C0000CF097 +:10E7A000DAFC0AF0CEFC002804D03D20DB49000151 +:10E7B0000CF0D1FC09F070FA002804D0F520D749FC +:10E7C00080000CF0C8FCFFF7EDFD04F0ABFE002864 +:10E7D00004D0F720D14980000CF0BDFC05F01CFEF0 +:10E7E00001F051FBCF480021C17040380171012177 +:10E7F00041710222C270017010BD10B5C94C403C7D +:10E800002078002804D00A210E2001F002FB10BD60 +:10E81000FFF700FD002801D00C2002E001F033FBDF +:10E8200000202071012060710A21E170207010BD6C +:10E8300070B5BC4C0646403C2078002804D03A21F4 +:10E840000E2001F0E6FA70BDFFF7E4FC002801D0CD +:10E850000C2010E0B34DE87808280BD20001001915 +:10E8600010223146443001F0DEFAE878401CE870AE +:10E87000002000E007202071012060713A21E17042 +:10E88000207070BD70B5A74C0646403C207800282B +:10E8900004D00B210E2001F0BCFA70BD30780028A6 +:10E8A00003D0012801D0122015E09E4D8035287933 +:10E8B000082817D2FFF7AEFC002801D00C200AE090 +:10E8C000984833782979721C883001F098FB2879B0 +:10E8D000401C287100202071012060710B21E17023 +:10E8E000207070BD0720F6E710B58E4C403C2078B4 +:10E8F000002804D039210E2001F08BFA10BDFFF75B +:10E9000089FC002801D00C2002E086490020C87054 +:10E910002071012060713921E170207010BD8148A3 +:10E9200010B540380178002904D00F210E2001F0E5 +:10E9300070FA10BD002101710E2181700F21C1708C +:10E94000FF2181710021C9430181774949680A7813 +:10E9500082728A8882814988C18101214171017056 +:10E9600010BD704910B540390A78002A04D03C2106 +:10E970000E2001F04EFA10BD6A4A0088C032508065 +:10E980000120107100220A7148713C22CA7008707F +:10E9900010BD10B5634C403C2078002804D02B21DA +:10E9A0000E2001F036FA10BD0821A01DFDF7BCFBBA +:10E9B00000202071012060712B21E170207010BDBA +:10E9C00010B5584C403C2078002804D005210E207A +:10E9D00001F01FFA10BD05F06EFDE08005F0C6FEE7 +:10E9E000207200202071012060710521E1702070EB +:10E9F00010BD10B54B4C403C2178002904D031218A +:10EA00000E2001F006FA10BD00214156042911D054 +:10EA100000290FD0081D0DD0001D0BD0001D09D0FE +:10EA2000001D07D0001D05D00A3003D00A3001D0E8 +:10EA3000122003E0084601F033FB00202071312052 +:10EA4000E07001206071207010BD30B5354D044676 +:10EA5000403D28788DB0002805D02A210E2001F0F5 +:10EA6000D8F90DB030BD10222146684601F0DBF91F +:10EA70001022A11804A801F0D6F9684603F00BFC97 +:10EA800010222C46A81D08A901F0CDF90020207104 +:10EA90000E20A0702A20E070012060712070E0E755 +:10EAA000F0B5204C85B0403C2078002804D03B21B4 +:10EAB0000E2001F0AEF971E40020A07119486946FA +:10EAC000C0304088888002A904F028FE002805D0C4 +:10EAD000002101A804F07FFE002865D16846114D91 +:10EAE00081880180283D684602A9008804F016FE4E +:10EAF000002803D009490D480CF02DFB039E04A902 +:10EB000037468837B878283605F04BFE002804D100 +:10EB100006480249401D0CF01EFB09E0CCE600004F +:10EB2000FF020000AC12002080000020140500004D +:10EB3000767EB87805F050FF002803D1FB49FC48E9 +:10EB40000CF009FB05F0B3FF0121484031460143B9 +:10EB50001FD06A461188A279FD2352001219118133 +:10EB6000A2794000515D4908490031435155A279CD +:10EB70001940014351556A46107C002802D00420F8 +:10EB8000014301E0FB200140A0794155A079401CE0 +:10EB9000A0710021684604F01EFE002804D16846DA +:10EBA0000188808881429ED10020207101206071FF +:10EBB0003B21E17020707EE770B5DE4C0546207881 +:10EBC000002804D034210E2001F023F970BD08F094 +:10EBD00087FF052804D0284608F03FFD002000E00C +:10EBE0000C202071012060713421E170207070BD13 +:10EBF00010B5D04C2078002804D00E21084601F032 +:10EC000008F910BD0622CC49A01D0CF01AF900200D +:10EC10002071012060710E21E170207010BD70B56F +:10EC2000C44C06462078251D002804D032210E2031 +:10EC300001F0EFF870BD3146002009F032F928707C +:10EC400000280CD100213246084606F080F92870D1 +:10EC5000002804D106223146B7480CF0F2F8012012 +:10EC600060713221E170207070BD70B5B14C054605 +:10EC70002078002804D030210E2001F0CAF870BDA1 +:10EC800008F073FD002803D104F0DEFA00280DD04F +:10EC9000287804F08AF8287806F0C0F9002020715E +:10ECA000012060713021E170207070BD0C20F6E70A +:10ECB000F8B5A04C06462078251D002804D0172161 +:10ECC0000E2001F0A6F8F8BD3146012009F0E9F860 +:10ECD0000127287000280FD13246012106F037F9AC +:10ECE0002870002808D19348062231463C300CF0A9 +:10ECF000A8F890484030877067711720E07027703F +:10ED0000F8BDFEB58B4C05462034A07B002804D00E +:10ED100028210F2001F07DF8FEBDA8781A2824D004 +:10ED20000EDC03000CF038FB16333333333321335E +:10ED300033333333333333333333333321212133D9 +:10ED40002A2824D00ADC1E3803000CF025FB0C20F6 +:10ED5000202020202020202020200E203A380300D0 +:10ED60000CF01AFB04150315031528887349884213 +:10ED70000DD81F21E173282121740120A073288858 +:10ED8000694604F0CBFC002803D0022014E01220D6 +:10ED900012E068460078019F00280FD0C637019E18 +:10EDA00000280DD0C736684601F05CF8002802D074 +:10EDB0003878002806D00C20E073FEBD9C37EEE7C3 +:10EDC0009D36F0E701203870A87830700020E0739D +:10EDD000684601F05FF8FEBDF0B5564C0746207856 +:10EDE00085B0002804D025210E2001F012F862E63B +:10EDF000388802A904F092FC4E4E00210836002803 +:10EE00000CD00220207131603171E1800E20A070A1 +:10EE10002520E0700120607120704CE6039D28469B +:10EE20000A30483501900020A87505223046019926 +:10EE30000CF007F8A87D0028F5D13888E080E5E7D8 +:10EE4000FEB53C4C06462034A07B002804D010219F +:10EE50000F2000F0DEFFFEBD1F20E07310202074A5 +:10EE60000127A7733088694604F058FC002810D1A8 +:10EE7000684600F0F7FF00280BD06846019D007837 +:10EE800028350028019806D0CA300178002909D118 +:10EE900004E0022007E08030406AF6E72035697B15 +:10EEA000002902D03A20E073FEBDA97B89070DD16D +:10EEB0000621017068460078002804D10198318845 +:10EEC0008030406A4180684600F0E4FF0020E07333 +:10EED0006F73FEBD70B5174D04462878002804D026 +:10EEE00038210E2000F095FF70BD1F2028710120F1 +:10EEF00068713821E97028702078002808D001282E +:10EF000006D0022804D0032802D01220287170BD38 +:10EF1000002606F051F8207807F061FC207808F010 +:10EF2000E6FF20780AF0ABFA2E7170BDCCE6000047 +:10EF30001F0500006C1200208C000020FF0E000056 +:10EF4000F8B5FE4D06462878002804D01D210E2075 +:10EF500000F05FFFF8BD1F202871012068711D219E +:10EF6000E970287008F0BCFD0C27042857D005284C +:10EF700055D0B0791224012801D000281DD1307855 +:10EF8000002801D0012818D1F079002801D00128EB +:10EF900013D17088EA49021F30248A420DD2B28808 +:10EFA000121F8A4209D22887B0886887B079002466 +:10EFB000012804D000280CD016E02C71F8BDDF48E1 +:10EFC0004030807800282AD0DC4A3C3201210846B3 +:10EFD00002E0DC4A0021012005F0B9FF040003D063 +:10EFE000D949DA480CF0B7F8F079012801D00028A7 +:10EFF00002D105F0C8FF0446002C01D01F2011E00B +:10F000003078012802D0002803D00AE00021022035 +:10F0100001E00021012005F0C6FF002801D02F717A +:10F02000F8BD00202871F8BD70B5C44C21780029C6 +:10F0300004D01E210E2000F0ECFE76E71F21217186 +:10F04000012161711E22E270217002781221012AD1 +:10F0500001D0002A04D14078002803D0012801D033 +:10F06000217162E700260C25012A09D008F038FD3D +:10F07000052803D008F042FA002806D0257154E78D +:10F08000618F208F08F083FBF6E726714DE7F0B51E +:10F09000AD490446143103C987B0A84D0591203508 +:10F0A0000490A87B002805D021210F2000F0B1FE9C +:10F0B00007B0F0BD1F20E873212028740126AE732D +:10F0C00022889F4B111F3020994243D261880F1F25 +:10F0D0009F42FAD291423DD8E2899D4B911F9942BD +:10F0E000F3D2218A8F1F9F42EFD28A42F3D8628ADD +:10F0F000FF23F4339A42EED8A28A954F13460A3B77 +:10F100003F1FBB42E1D2C9088A4223D9E18A228B40 +:10F110009142E0D821791220002902D0012919D189 +:10F1200002E061790029F9D1217B002901D0012970 +:10F13000F5D108F0D5FC05280BD008F0D1FC042847 +:10F1400007D0287D002804D105F017FD81498842A9 +:10F1500001D00C20BDE0684604F0AEFA002801D0D2 +:10F160000920B6E001220321009804F0E6FF009F89 +:10F17000042178880F3703903846FCF7D5FF3846CE +:10F18000039905F0C2F874A0009F0068069003215F +:10F1900006A81337FCF751FF002006A90A5C3A5471 +:10F1A000401CC0B20328F9D30098218A8180618A6B +:10F1B000C180A18A01810146002720318F73CF735E +:10F1C0006179002902D0012903D101E0C77600E06E +:10F1D000C6760622A11D1C300BF033FE00980522D6 +:10F1E00004A90A300BF02DFE0098A0300673694682 +:10F1F0000F71012101A8FCF720FF6946087941073A +:10F20000C206490F920F80068918C00F0818694678 +:10F210000871401D009B0928987601D20830987625 +:10F2200001220021184604F088FF00988A3005F07A +:10F2300044F9002804D145484349FC300BF08BFFCA +:10F24000207B002806D0012808D03F4943480BF016 +:10F2500082FF40E000213B4A012008E0374840306F +:10F26000807800280FD0354A01213C32084605F04D +:10F270006EFE00282FD000988030807A05F03FF98C +:10F28000002816D01AE000988030807A05F037F90F +:10F29000002804D131482C490D380BF05CFF009850 +:10F2A00004F0DAFA002800D153E72C48264909383F +:10F2B00041E02A482449C01D0BF04DFF009804F09E +:10F2C000CBFA002804D025481F490B300BF043FF30 +:10F2D0001F20E873ECE62079012801D0002803D133 +:10F2E00005F051FE00280CD10320009905F05BFECB +:10F2F000002806D162882188009808F0F5F90028D6 +:10F3000007D000988030807A05F0F9F8002805D001 +:10F3100009E00098A0300770EF73C9E60F480A496A +:10F3200031300BF018FF009804F096FA0028BBD09B +:10F330000A48054935300BF00EFF0AE76C12002031 +:10F34000FD3F00008C000020CCE600000607000016 +:10F350007B0C0000FFFF0000112233001C0800009E +:10F3600038B5F94C2078002804D022210E2000F076 +:10F3700050FD38BD1F202071012565712220E070ED +:10F38000257008F0ADFB052802D00C20207138BD97 +:10F3900000202071684608F059FA0028F7D100983B +:10F3A0008030807A05F0ABF8002803D1E749E848BF +:10F3B0000BF0D1FE009804F04FFA002804D0E44886 +:10F3C000E249001D0BF0C7FEDF4820300575E1481B +:10F3D0000078F2F799FF38BDF8B5DB4D04462035CB +:10F3E000A87B002804D023210F2000F012FDF8BDD7 +:10F3F0001F20E873232028740120A8736288D64B4D +:10F40000911F302099424CD2A1888E1F9E4248D233 +:10F410008A4246D8E288FF23F4339A4241D82289AF +:10F42000CD4E13460A3B361FB3423AD2C9088A4230 +:10F4300037D96189A289914233D80026208869464C +:10F4400004F05EF9022700280BD1009800F0F8FCC8 +:10F45000002806D000988030416A0A78002A06D138 +:10F4600001E0EF73F8BD826B1278002A01D03A20D8 +:10F4700017E005228A71416A0E81426AA188518192 +:10F48000426AE1889181426A2189D181406A018979 +:10F490004289914204D88179082901D8914202D346 +:10F4A0001220E873F8BD2188418000988030406ABE +:10F4B0000770EE73F8BDFEB5A34C06462078002811 +:10F4C00004D024210E2000F0A4FCFEBD01256571AE +:10F4D0002420E0702570304604F039FF002801D068 +:10F4E000002000E0122020710028EED1964F052266 +:10F4F000E03738463D7731461D300BF0A2FC002640 +:10F500003E77701E69460880684604F031F900288D +:10F5100019D168460788684601A9008804F0F0F808 +:10F52000002804D08A4889498F300BF014FE0198D6 +:10F53000A0300573684604F01BF9002803D1684623 +:10F5400000888742E7D12671FEBD38B57E4C05465E +:10F550002034A07B002804D026210F2000F059FC85 +:10F5600038BD1F20E073262020740120A073288856 +:10F57000694604F0C5F800280BD1009800F060FC43 +:10F58000002806D000988030416A0A78002A06D107 +:10F5900001E002200DE0806B0078002801D03A20C5 +:10F5A00007E007200870009829888030406A418071 +:10F5B0000020E07338BD10B5634C2078002804D0DB +:10F5C00006210E2000F025FC10BD002020710E2029 +:10F5D000A0700620E0700821A01D0BF08FFCA1791F +:10F5E00001200143A1716071207010BD38B5564CE7 +:10F5F00005462034A07B002804D02C210F2000F0E9 +:10F6000008FC38BD1F20E0732C2020740120A0735B +:10F610002888694604F074F800280CD1009800F09E +:10F620000FFC002807D00098014680314B6A1A78F9 +:10F63000002A06D101E0022025E0896B0978002923 +:10F6400001D03A201FE04030007F00281DD0082262 +:10F65000A91C181D0BF0F5FB00986A898030416ADF +:10F660008A81406A294610220C310E300BF0E9FBEA +:10F67000009803218030406A01700098298880300A +:10F68000406A41800020E07338BD0C20FBE770B574 +:10F690002D4E044630780C25002804D018210E2069 +:10F6A00000F0B7FB41E402F0CBFE032865D002F086 +:10F6B000CDFE032861D06079002801D001282DD12A +:10F6C000A079002801D0012828D1A07B002805D0EE +:10F6D000012803D0022801D003281FD1607B002815 +:10F6E0001CD0C0081AD1628801208003824202D84F +:10F6F0002188814203D9207901280FD119E020798E +:10F70000002806D0012814D0022805D0032805D1EE +:10F7100002E0202A0BD30CE0A0290AD22079042889 +:10F7200005D12088202802D36188884201D912257A +:10F7300023E00548217920308175607900280DD0BB +:10F7400001280FD019E000006C120020CCE6000068 +:10F750007F080000800000207B0C0000FA4A002196 +:10F76000204607E0F9488078002806D0F74A0121B2 +:10F77000121F204608F01BFB0546012035717071F1 +:10F780001821F170307058E410B5F04C403C2178ED +:10F79000002904D01A210E2000F03BFB10BD017897 +:10F7A0001F2902D91220207106E000212171027860 +:10F7B000411C104608F09EFB012060711A21E17087 +:10F7C000207010BD10B5E14C403C2178002904D0D8 +:10F7D00020210E2000F01DFB10BD01781F2902D949 +:10F7E0001220207106E0002121710278411C104690 +:10F7F00008F06FFB012060712021E170207010BDC6 +:10F80000F8B5D24C403C2178002904D01B210E20B1 +:10F8100000F0FFFAF8BD012666710C212171007815 +:10F820000025012804D000285CD01220207188E037 +:10F8300002F006FE002835D102F008FE002831D182 +:10F8400008F021FAC24988422CD108F07AFA00283F +:10F8500077D0684603F0C6FEBB4A00990C3A916027 +:10F86000002803D0BB49BC480BF075FC01220321E2 +:10F87000009804F008FC009808F0CDFB00988A304E +:10F8800004F01BFE002804D1B348B24908300BF045 +:10F8900062FC009803F08CFA002851D0AE48AD49C4 +:10F8A0000C301CE002F0CCFD02284AD102F0CEFD63 +:10F8B000002846D1A5482038807D002841D0012865 +:10F8C0003FD004283DD008F03CFA002839D0002071 +:10F8D00003F06EFA002833D09F489E4924300BF085 +:10F8E0003AFC2DE002F0ACFD032804D002F0AEFD9E +:10F8F000032820D025E002F0A6FD0090002003F0B0 +:10F900004FF900281DD1257100988030807A04F0CD +:10F91000F6FD002804D190488E493E300BF01BFCC8 +:10F92000009803F0B1FE00280BD08B488949423083 +:10F930000BF011FC05E0002003F032F9002800D1A3 +:10F9400025711B20E0702670F8BD38B57F4C054648 +:10F95000403C2078002804D02D210E2000F059FAD8 +:10F9600038BD2888694603F057FE002801D00220E0 +:10F970000FE00098CA21095C002909D13321095CF4 +:10F980000F2901D0102903D1FC21095C00290BD0DB +:10F990000C2020710E20A0702D20E0702888E080BF +:10F9A00001206071207038BD1022A91CD8300BF0E6 +:10F9B00048FA00980421C03081720020E9E738B588 +:10F9C000624C0546403C2078002804D02E210E20B1 +:10F9D00000F01FFA38BD2888694603F01DFE002894 +:10F9E00001D002200CE000980146C030827A002A43 +:10F9F00005D12031C97C0F290DD010290BD00C2046 +:10FA000020710E20A0702E20E0702888E080012058 +:10FA10006071207038BD052181720020F0E77CB54F +:10FA20004A4C0546403C2078002804D037210E205F +:10FA300000F0EFF97CBD2888694603F06FFE0028CE +:10FA400007D002202071012060713721E170207001 +:10FA50007CBD01987F22014628300272427200224A +:10FA60008272A87822318870E878C8702879087185 +:10FA70002271E8E71CB5354C403C2178002904D0C0 +:10FA800013210E2000F0C5F91CBD0088694603F063 +:10FA900045FE002801D0022006E001982421095CDF +:10FAA000801C012902D00C20207107E0002201995E +:10FAB00022712831097A21720088E080012060716A +:10FAC0001321E1700E21A17020701CBDF8B51F4CF0 +:10FAD0000546403C2078002804D035210E2000F057 +:10FAE00098F9F8BDA878002801D0012804D1A88889 +:10FAF000FF21F531884201D91220207128886946FA +:10FB000003F08AFD0126002806D0022020716671CC +:10FB10003520E0702670F8BD009800270246C030FE +:10FB20000770AB8801464380104680300677AA787C +:10FB3000012A00D000220A70407F002801D003F083 +:10FB400027FA2771E3E700008C000020AC120020A8 +:10FB5000FFFF0000CCE600002D0A0000F8B5D44EEF +:10FB600004463078002804D03D210E2000F051F9E1 +:10FB7000F8BD2088694603F04FFD002801D002201F +:10FB800027E0009F6488FD883A896800B988401C96 +:10FB9000844217D3C7484143800050430BF0BAF961 +:10FBA000401EFF2180B2F531884200D908468442C8 +:10FBB00000D22046691C401C0BF0ACF96D1C684358 +:10FBC000401E85B2E820C05D002800D17D84F5800C +:10FBD00000203071012070713D21F1703070F8BD4E +:10FBE00070B5B34C05462078002804D033210E2090 +:10FBF00000F00FF956E502F023FC002801D00C209C +:10FC000018E02978002911D00A290FD014290DD025 +:10FC10001E290BD0282909D0322907D04B2905D01D +:10FC2000642903D0FF2901D0122003E0284603F005 +:10FC30004BF900202071012060713321E1702070A8 +:10FC400030E570B59A4C05462078002804D03E2156 +:10FC50000E2000F0DEF825E502F0F2FB002803D1CB +:10FC600002F0F4FB002801D00C2003E0287808F013 +:10FC70004DF900202071012060713E21E17020705B +:10FC800010E510B5017801240B000BF085FB3FBF98 +:10FC9000BF21BFBF4C94BFBFBF2427BFBF464F612A +:10FCA000BFBF59BFBFBF2B97BF9B9FBF797DBFA36E +:10FCB0008185888C6590BF5DBF555275A7ABBF37F6 +:10FCC0002F33BB6DAFBF71423F3B4969B3B7C00033 +:10FCD000FEF750FD9BE0FEF790FD98E0801CFEF7DC +:10FCE000D1FD94E0801CFEF7E3FF90E0801CFEF75E +:10FCF00080FE8CE0801CFEF792FF88E0801CFEF7FF +:10FD0000B4FF84E0801CFEF793FD80E0FEF7ECFD7D +:10FD10007DE0801CFFF7DEF879E0FEF769FF76E012 +:10FD2000FEF7BEFE73E0FEF74BFE70E0FEF7F7FD58 +:10FD30006DE0FEF72EFE6AE0801CFEF786FE66E0B0 +:10FD4000801CFFF797FE62E0801CFEF7DAFF5EE0A2 +:10FD5000801CFFF775F85AE0801CFFF73DF856E06D +:10FD6000801CFEF7FEFD52E0801CFEF725FF4EE0F2 +:10FD7000801CFFF754FE4AE0801CFFF737FC46E08A +:10FD8000801CFFF7DDF842E0801CFFF74DF93EE0F4 +:10FD9000801CFFF77CF93AE0FFF7E2FA37E0801CBD +:10FDA000FFF71AFB33E0801CFFF785FB2FE0801C78 +:10FDB000FFF7CBFB2BE0FFF7FEFB28E0801CFFF7F3 +:10FDC00066FC24E0801CFFF7DFFC20E0801CFFF7CE +:10FDD00017FD1CE0801CFFF7F5FC18E0801CFFF706 +:10FDE000B4FD14E0801CFFF7EAFD10E0801CFFF773 +:10FDF0006DFE0CE0801CFFF7B1FE08E0801CFFF7F1 +:10FE000020FF04E0801CFFF7EBFE00E0002420460A +:10FE100010BD274A2032537C002B03D19074D1743B +:10FE200001205074704730B5134606E0CC18203CD2 +:10FE3000D51AE47F5B1E4455DBB2002BF6D130BDF2 +:10FE4000017800290CD14121095C002908D18030BA +:10FE5000017C002904D0007C042801D001207047D7 +:10FE60000020704701784068002903D001780029FC +:10FE700005D100E0E4E740304078002801D00020C0 +:10FE80007047012070470A4900208031886740315F +:10FE90000871704710B50178012908D14068803099 +:10FEA000417F002903D00021417703F071F810BD94 +:10FEB0006C120020C409000070B5FC4D00246C7069 +:10FEC0002C70AC616C72AC720120E872F84844701E +:10FED000C473AC62F7482C6302F05FF9002804D0C9 +:10FEE000FF20F5A14F300BF036F92C7770BDF8B537 +:10FEF000F54902250D60F5490026CE630127CF6341 +:10FF0000F349C96A09070DD4F24AD36AF2494B6230 +:10FF1000136B8B62536BCB62936B0B63D26BCB0512 +:10FF20001A434A63ED4C002823D0012825D0FF2036 +:10FF3000E1A1A2300BF00FF9E948A063FF200430E3 +:10FF40006063276303202061E64996204860D74913 +:10FF50001C2008560B22D243811A904237D011DC64 +:10FF60001C313AD00A2938D0142934D0182911D19B +:10FF70002FE0DD486061DD4802E0DD486061DD487A +:10FF8000A061D9E708301FD004281BD0082817D05B +:10FF90000C2812D0FF20D8A176300BF0DCF8DB491A +:10FFA000D9488860DB48DA494160DB490160DB48B9 +:10FFB0000560DB4910204860F8BD0420E060EEE7F2 +:10FFC000E660ECE7FC2000E0F820E060E7E7F420E2 +:10FFD000FBE7F020F9E7EC20F7E7D820F5E710B5CC +:10FFE0000C460146CF480BF0B2F9B048047210BD80 +:10FFF000AF4840787047AD4A517010707047F8B5FF +:020000040001F9 +:1000000004460D4650791179000208436900091928 +:100010000884501C01460E78012730464E7836027F +:1000200030438E78C9783604304309060843117886 +:1000300000020843A9006050284608303E4686402A +:10004000002B0CD0012B04D0FF209BA1E9300BF03A +:1000500082F8206B3043AF4038432063F8BD206BFB +:10006000B043F8E770B50D460446082904D9FF20CF +:1000700091A1FA300BF06FF80022002D0CD9AA489C +:100080009100635809180B6053001B191B8C0B62FD +:10009000521CD2B2AA42F3D3206BA449086070BDAF +:1000A00010B504460B22D2430C308C49944223D025 +:1000B00008DC1C3026D00A2824D0142820D0182888 +:1000C00009D11BE02046083014D0042810D008289D +:1000D0000BD00C2807D0FF2087A176300BF03BF81F +:1000E0007248047710BD042000E00020C860F7E7E4 +:1000F000FC20FBE7F820F9E7F420F7E7F020F5E72C +:10010000EC20F3E7D820F1E76948007B704773499A +:10011000C2784A6202461378184653781B02184385 +:100120009378D2781B041843120610430002C8616A +:100130007047252808D0262808D0272808D0410055 +:100140000A2807D8091D06E0022105E01A2103E06C +:10015000502101E0891DC9B2604A9160614948613E +:10016000704752498861704770B5002816D0022246 +:100170004E4C6F4BA27203201860644D6248686059 +:1001800000200126207500290AD001290FD002295C +:100190001DD049A167480AF0DEFF70BD0122E7E7E4 +:1001A0006548012A01D0466070BD066070BD3F48B9 +:1001B000012A006B05D001214905084320636960CD +:1001C00070BD0121090508432063696070BDA06905 +:1001D000002804D1492038A1C0000AF0BCFFA16961 +:1001E000A06A4018554988604A4855498160554978 +:1001F000C1600120216BC0030143216368602C486A +:10020000C67370BDF8B54A4801688F084449BF00FD +:100210004A68D206D60F10228A60002404603B4848 +:10022000394981600C2069460870474D2C6142496C +:10023000012008610BE000BF00BF00BF00BF00BF8E +:1002400000BF00BF00BF69460878401E08706846BE +:100250000078002802D028690028ECD06846007891 +:10026000002804D14D2024A1C0000AF074FF2C61A5 +:100270000E48012144728472C1722D480760002E1D +:1002800002D0274910204860F8BD01460A78104680 +:100290004A78120210438A78C9781204104309067A +:1002A000084300020D49000AC86370477413002018 +:1002B00094130020A81300207372635C68616C5F64 +:1002C0007263732E6300000080E100E0C01F0040F5 +:1002D00080000010C0000010001700400015004012 +:1002E0005B060000401500400601020025000302E5 +:1002F000050103001F0003027372635C68616C5F99 +:100300007263732E630000000040000400F501409A +:100310004080004080F501401011004080E200E084 +:1003200000130040761300200016004040160040E5 +:1003300000120040550200000010004040850040BF +:10034000488100401010004000110040FB4902208D +:100350000860FB4908607047FA490220086070474E +:10036000F9490870704710B5F84801F01EFF0028E1 +:1003700003D0F749F7480AF0EEFE10BD10B5F34878 +:1003800001F02BFF10BDF4494860704770B5F34C85 +:100390000546A06AA84203D3ED49F1480AF0DBFE06 +:1003A00001202073EF49002025614860EE48456038 +:1003B0000120216B800501432163EC49486070BD39 +:1003C000E64802210173C6210161E64A002151601D +:1003D000816AE54AC63151600121026B89050A43F1 +:1003E0000263E248416070470121E048890581606D +:1003F000DA48026B8A430021026301737047DC48CC +:1004000001214160C160D74900204860D649486059 +:10041000D24988627047D74940200862D6490A68A5 +:1004200002430A607047D44801684022914301604A +:10043000D049002008627047CF48016810229143DC +:100440000160CE49012088617047CD490020C86114 +:10045000C94801681022114301607047C849CA6940 +:10046000012A01D000207047C24A92685206520EFB +:10047000524202700020C8610120704770B50C0024 +:10048000054604D1D920B24980000AF064FEE00795 +:1004900005D0012C03D0AE49BA480AF05CFE002D0D +:1004A0000DD00221AD4801294172C472B24808D072 +:1004B00002290BD0A649B4480AF04DFE70BD0121B7 +:1004C000F0E7016804221143016070BD0168082251 +:1004D0001143016070BDF8B5A04C0025E27A910788 +:1004E00001D5410713D4D306A849002B05DA4B7B6D +:1004F000002B02D08B7B002B09D0130702D50B7881 +:10050000002B04D1520703D54978002900D10125D9 +:10051000677A002201239849002F1BD00226304021 +:10052000284348D0084601688E089949B6004D68AE +:10053000ED06ED0F10278F60002101608B4A954872 +:1005400090600C206A4610708D4F39618B490120F4 +:10055000086114E0854D8F48A86008688008800015 +:100560000860A272E372F8BD00BF00BF00BF00BF09 +:1005700000BF00BF00BF00BF1078401E1070107891 +:10058000002802D038690028EED01078002804D165 +:100590004D208149C0000AF0DEFD00203861607204 +:1005A000A0720120E07274480660002DDBD078480C +:1005B00010214160F8BD012F06D0022F0CD06449F4 +:1005C00076480AF0C8FDF8BD08680425A84308600D +:1005D0006272E372A372F8BD08680825A843086038 +:1005E0006272E372A672F8BD5C4908757047F8B58F +:1005F000664D5A49EC7B086B002C58D001245B4AAD +:10060000E4039460A04308635B480768604C1021D2 +:10061000A16000210160001490600C206A461070F7 +:10062000574C21615548012606610AE000BF00BF12 +:1006300000BF00BF00BF00BF00BF00BF1078401E5A +:1006400010701078002802D020690028EED01078B1 +:10065000002804D14D205049C0000AF07CFD002044 +:10066000E060206160606061A061434807603F49CD +:1006700000144860464910204860384CA07A012890 +:100680000FD0022810D0444945480AF064FD0020EC +:10069000E873207D022803D1424801688907FCD510 +:1006A000F8BD36480660F2E734484660EFE72F4A67 +:1006B000906000200863087B2A4E002802D07068F2 +:1006C000012809D000222E4C2069012806D00023E1 +:1006D000887A012804D006E00122F4E74023F7E7F6 +:1006E000E768012F04D000271F43012802D004E04F +:1006F0002027F9E76368012B05D000233B432A4FED +:10070000022802D007E01023F8E73968012902D156 +:10071000E168012904D000211943022802D007E032 +:100720000821F9E73B68002B02D1E368012B3DD09B +:1007300000230B4302283BD03EE0000080E100E0B4 +:1007400080E200E000E100E092000020A813002019 +:10075000B8020100A202000000150040741300203E +:10076000B3020000408100404085004000F5014098 +:100770000080004040150040001200400010004082 +:1007800000110040690300007E0300009413002064 +:100790000013004000400004F8020100CF030000F5 +:1007A0005E03000000E200E0001400400423C0E704 +:1007B000002A01D0022100E000211943022807D1BC +:1007C0006068012804D17068012801D0012700E089 +:1007D000002790480F4301680906090E02D061699D +:1007E000012900D00021297300680006000E02D004 +:1007F000A069012800D0002068738748006A00289B +:1008000003D000F0DCF9012800D00020A8730020FC +:10081000E060206160606061A06180494860804E56 +:100820008049307548683C4670620968B1620B4681 +:10083000B17A022909D17178002906D07A4A526822 +:1008400012780A40317891430ED000212970774FF9 +:10085000E10710D03978032908D0022906D002F028 +:10086000D1FC0121B06A20E00121EFE707F022F975 +:100870000121B06A27E0A0060ED53878032806D0FB +:10088000022804D00221184602F0CBFC0FE002211E +:10089000184607F010F90AE0A00708D538780328B1 +:1008A0000FD002280DD00021184602F0BAFC5E4895 +:1008B00041680622B01C09310AF096FA002805D0DA +:1008C0000DE00021184607F0F6F8F0E75648317AB7 +:1008D00040680078C009814201D1012000E0002079 +:1008E00068702046FFF7F7FD387800280DD0012802 +:1008F0001ED002282FD003284AD04D494D480AF077 +:100900002AFCB07A022856D075E0A00701D507F07E +:10091000C6FC200702D5012007F0FDFC600702D5C8 +:10092000002007F0F8FCA006EBD507F059FCE8E73B +:10093000A00701D508F0E8FF200702D5012008F044 +:100940004DFE600702D5002008F048FEA006D8D56D +:1009500008F098FDD5E7A007BF25002802DA2C4053 +:1009600004F022FF200703D52C40012004F05DFB9A +:10097000600703D52C40002004F057FBA00602D5E9 +:100980002C4004F061FE6006BBD504F04AFBB8E7DA +:10099000A00701D506F0F0F8200702D5012005F0E8 +:1009A000B1FF600702D5002005F0ACFFA006A8D576 +:1009B00005F01CFFA5E7307B00281CD0174900225A +:1009C0004A60022820D0012803D019491A480AF0A9 +:1009D000C2FBB16A3069884203D8154917480AF04A +:1009E000BAFB1048316941600120316B8005014339 +:1009F000316313494860307D012800D050E611482A +:100A000001688907FCD5F8BD3169B06A411805480D +:100A10004160E9E740160040401500404081004039 +:100A20007413002040850040001500409200002013 +:100A3000B8020100FD0400001205000013050000CB +:100A400000F5014000E200E02E48002101704170F5 +:100A5000704770B5064614460D460120F0F7A2FC1B +:100A600028490120284B08709E60DC601D6170BD24 +:100A7000F8B504460120F0F795FC224901200870E2 +:100A800021494C60214900264E600321204D090672 +:100A9000A960204F002C0AD0012C03D01EA14120B8 +:100AA0000AF059FB3E60032000066860F8BD38601C +:100AB00001200006F9E710B51248017800290ED090 +:100AC0000321134A0906916010494A680021002A4F +:100AD00003D0154A1268427000E041700170002096 +:100AE000F0F760FC10BD07480178002907D00748DF +:100AF0004068002802D00C480068C0B270474078B7 +:100B0000704700009300002000F5004000F1004015 +:100B100000F5014000F200407372635C68616C5F35 +:100B200063636D2E6300000000F400403B48002129 +:100B30000170417010218170704770B506461446EF +:100B40000D460220F0F72EFC01203449344A08708B +:100B5000E41E14619660556070BD10B50220F0F778 +:100B600021FC2E49012008702E48002101604160BF +:100B7000816001202C49C005486010BD10B5274890 +:100B80000178002917D00121274AC905916025491C +:100B90000B680022002B05D04B68002B02D089681F +:100BA000002902D04270102103E0012141701F4949 +:100BB0000968817002700020F0F7F4FB10BD17483F +:100BC0000178002912D01748016800290AD001686D +:100BD000002905D04168002902D08068002803D090 +:100BE000002070470220704701207047407870470E +:100BF0000A48017800290FD00A480168002905D069 +:100C00004168002902D08068002801D01020704778 +:100C100006480068C0B27047807870479500002091 +:100C200000F5004000F1004000F5014000F40040F4 +:100C3000FFB593B0044600201D9E049015981C9D9E +:100C40001027082806D0E06901F014F8002809D020 +:100C50003770CCE028880921384328801F98022764 +:100C6000017016E0E169012088710521E269C9027D +:100C70009180E1698872E169F9480881E1690020A1 +:100C80008873288820210843288011211F98042771 +:100C900001701F980225801C0390307810900A2064 +:100CA0003070204618301190F5F7A1FC00206FE05D +:100CB0001598102809D1022D07D06846828A049918 +:100CC0000398401A8270110AC1706846C08A16994A +:100CD000884203D9E349097A149106E0884204D195 +:100CE0001099002901D0317021E003990870000AA1 +:100CF00048701E980088401BC01B83B2FF20C01B99 +:100D0000984200D203460398149AC0190CA9009285 +:100D1000019002912020015D6846C08A0022F5F70B +:100D2000DBFC3070002806D0C0B2832862D0684651 +:100D3000C08A208345E00F98002805D0C948006884 +:100D400000790A2830D33CE06846008EC119C9B248 +:100D50000491022D0FD01F99049A4978914203D132 +:100D60006A46128C824209D0BE480491006801781C +:100D7000032909D027E008461F994870B948006840 +:100D80000178042906D008E000790A281BD2012046 +:100D90000F9009E06946C98A818003990498081870 +:100DA00003900498281885B205AA14991198F5F7AC +:100DB00021FC002805D11E980088401BB84200DBAA +:100DC00076E7022D0ED01598102807D1049A0399C2 +:100DD0006846808A891A8870000AC8701E98058043 +:100DE000002030709F4800680078032802D000205F +:100DF00017B0F0BD0220FBE7F8B50446406B0026B3 +:100E0000134600282BD0491F8DB2618F2A46083225 +:100E1000278F8A18BA4221D89A7840185F78110231 +:100E200039430170090A41701A79DF781102394398 +:100E30008170090AC1700571290A41712A46591D3C +:100E4000801D09F0FEFF608FAD1D401980B26087E4 +:100E5000626B002110180170417000E009263046D5 +:100E6000F8BD30B50B88048F9C4212D9446BE01852 +:100E70004478057824022C430BD044790579240268 +:100E80002C436404640CA41D1B190B80106000200B +:100E900030BD822030BDF7B588B000256846058298 +:100EA00005275DE00398417802780E0216434179E8 +:100EB000027908021043000452D40A9801230680E4 +:100EC00005A802905B02002200970195304609991F +:100ED000F5F702FC04004AD16846018A01830398B1 +:100EE0004179027909021143437802781C021443C4 +:100EF000B4421ED10A041CD44B0401215B0C8903AB +:100F000000950B4301970295C17880780A0202434D +:100F100020460999F5F7FCF9040011D103994879A5 +:100F20000A79000210430122D20310430871000A1B +:100F3000487103AA06A90898FFF793FF0400CED0D2 +:100F400003990095019702954878097800020843B3 +:100F500069468B8A00220999F5F7DAF9822C06D1C5 +:100F600003AA04A90898FFF77CFF04009AD06846FA +:100F7000058209E003984179027909021143490485 +:100F8000490C0171090A417103AA04A90898FFF7E5 +:100F900068FF0028EED0822C02D020460BB0F0BDB6 +:100FA0000020FBE730B50446406B002597B00028D1 +:100FB0000DD00B2268460270228F0281606B039174 +:100FC000019000216846F2F72AFB684605706563C8 +:100FD0006587258717B030BDF8B50F460546696BA4 +:100FE0000020069E144600290FD0012B0DD1324659 +:100FF00039462846FFF74FFF002806D1002C04D0C1 +:1010000032463946284600F044FEF8BD00220280F0 +:10101000C262831D0263C36142634287028720303C +:101020000170704710B50022D24302800420FBF704 +:10103000E4FA10BD10B596B00446FFF7B3FF208E5A +:10104000002808D0012069460870E06A019000215C +:101050006846F2F7E4FA0020E062206316B010BDA3 +:1010600001280000AC1300200146098800200A076F +:1010700000D501200A06120F01D002221043CA0532 +:1010800001D5042210438A0501D5102210434905D9 +:1010900001D5202108437047FFB5A9B00600329D55 +:1010A000359C2B981F46229016D0007841060FD40D +:1010B0008106890E1E2909D021884A05520E0BD1BE +:1010C0003A88172A08D3FE4A914205D0C10906D0B2 +:1010D0008006800E122802D003202DB0F0BD2046DD +:1010E0002C302690F7492A980872002018AA0390FD +:1010F00010726A46107404AA0A60339A4A6020AAE1 +:10110000908090812298007801908106681C1C9044 +:10111000701F1D902B98890EC21C249222462032EB +:101120001B92083A401C02920B000AF035F91FFD91 +:10113000FD11FD1FFD8EFDFCFDFBFDFAFDF9FDFC23 +:10114000FDF8FDFDFDF7FDF6FDFDFDFDFDF5FD00E6 +:10115000032E76D102E018A9087219E30320287043 +:101160001C9917220A7000224A70CFE2052EF0D196 +:101170004178027808021043208320A98880249AAD +:101180005178127809021143618300287ED0884289 +:101190007CD800202072E080401E60840298F5F721 +:1011A00026FA05202870A81C0190022000901BAA96 +:1011B0002A990298F5F71EFA002868D118A8807CB1 +:1011C000012803D002206870102002E0012068701E +:1011D00002202490002225A91CA8F1F7AAFD0028CE +:1011E0002BD120A8007D2499814226D13A880099EC +:1011F000801C511A814220DB10A8C18D019801701A +:10120000090A417001991CA8891C01910099019A51 +:10121000891C009125A9F1F78CFD20A8007D01997A +:101220001BAA091801910099081880B200902A9908 +:101230000298F5F7DFF90028CCD00098022826D0D4 +:1012400064E272E018A9087261E2072E6DD341785A +:101250000346027808021043208320A98880249A3C +:101260005178127809021143618300280ED0884218 +:101270000CD8012020725879197900020843E080C7 +:1012800000202073E06900F0F5FC01E098E0A9E09F +:1012900000280ED1E169012088710521E269C902A7 +:1012A0009180E1698872E16987480881E1690020DD +:1012B0008873F01F60842298C01D60620298F5F761 +:1012C00096F907202870681C0090012001900020EA +:1012D00010A9C8852FE00198012814D0E069807911 +:1012E000012830D000981E38417F007F0902014359 +:1012F00000980170090A41700098801C00900198C4 +:10130000801C80B2019010A8C18D00980170090A5C +:1013100041700098801C09E00AE296E13BE1DFE0C1 +:1013200004E29BE077E036E016E2AFE0009001983F +:10133000801C80B201901BAA2A990298F5F75AF9ED +:10134000002803D007E010A8818DD1E739880198E3 +:10135000081A0428BFDA0198012843D0E06980798F +:10136000012804D010A8818D5548814206D110A8CB +:10137000818D00980170090A417009E000981E38BB +:10138000417F027F0802009910430870000A4870EC +:101390000198801CBAE1072E01D0152E76D1417834 +:1013A000027808021043208320A98880249A51786B +:1013B0001278090211436183002801D0884201D9C3 +:1013C00001203FE7012020720020E0802073052EDD +:1013D0000AD01D982299E269C0B2491DF1F783FC39 +:1013E000002801D00A202DE70020C04360841AA8FD +:1013F000019023A922980297039500910078002379 +:101400008206920E20462A99FFF712FC0390208B49 +:1014100020A988807BE1032EC0D1402220A98A81A7 +:101420004178027808021043208320A988802A99F5 +:101430001EAB1C9A02930192009139880022491E2A +:101440008BB21B990978F5F747F918A9087200289B +:1014500033D10B20287010A8008F3FE0052E9DD1BE +:10146000802220A98A8141780278080210432083D3 +:10147000249984464A78097812020A43628420A992 +:1014800088801248824202D30720DBE6AFE03F208B +:101490008002024362842A981FAB1C990293019137 +:1014A00000903888401E83B21B9801786046F5F79B +:1014B00013F918A9087200280CD08328AAD107E0D4 +:1014C000FFFF0000AC130020012800000102000013 +:1014D0000220B8E00D20287010A8808F401C15E174 +:1014E00001990C22C9095143C91CB14204D9019880 +:1014F00040067CD5002009E14278037810021843A9 +:1015000020AA9080844622980078400609D50520BC +:101510006A46107422980078C00905D00020107423 +:101520001DE106206A46107424981F902A9A0090A4 +:101530000023701A029383B21E9001921B9800221E +:1015400001786046F4F7E4FE18A9087200226946A3 +:101550000A74832801D10220039022980078400663 +:101560000DD52088C00506D520A9208B8988884202 +:1015700001D100206062002018A90872C6E0FF2196 +:10158000013120A88181808820831E9860841F9863 +:1015900060621320B8E0052E29D341780278080252 +:1015A000104320A98880218F002902D0FE4A914251 +:1015B00006D10A216A4611740121C943218702E03C +:1015C00007216A46117422992A9A491D01920091B5 +:1015D00001221D990023D203029311438BB2249957 +:1015E0004A78097812020A431B99097800E0C9E099 +:1015F000F4F78EFE18A90872002269460A740122C7 +:10160000520220A98A81832808D0002809D0218F7E +:10161000E54881427ED10020208778E088882083B9 +:101620004DE7606B002808D031462046229AFFF72C +:10163000E3FB18A90872002869D12B463A463046C8 +:10164000229900F056FB039061E02298022E407828 +:1016500001907DD1002801D0012879D10820694668 +:1016600008740198087521A800901B980022017841 +:101670002046019BFFF7B0FC6946002248758A7539 +:10168000002802D10198012809D0208F002806D017 +:10169000002008740120800220A988810EE004A89F +:1016A0003399F1F7BCFF03900020694608740120CC +:1016B000800220A988810398022807D0BB480068CF +:1016C0008079002805D018A908722BE001982083A2 +:1016D0001DE00398002803D0812018A9087240E07B +:1016E00021A800901B98012201782046019BFFF75A +:1016F00073FC18A9087220463499FFF753FC18A907 +:10170000087A002803D11920287001203880684603 +:10171000007C00E03CE0002804D004A83399F1F7F5 +:101720007EFF0390039800282ED01AE0062012E5D1 +:101730002078000713D5012E11D1092168460174C4 +:10174000A188818204203499FAF757FF082100E02C +:1017500005E020A88181CDE60198400612D503203E +:10176000039020A9208889890843208020A988899E +:101770004005400E04D026992B9808602698868054 +:101780000398AAE40420E6E418A8007A00280ED002 +:101790000120287022980078687020A88088A8709E +:1017A000000AE87018A8007A28710520388020A95E +:1017B0002088898988432080E2E7FFB50746A1B0E9 +:1017C00000201C903A7801209040794A7C681040B3 +:1017D00010AA1087744B22885B1C9A4203D0002801 +:1017E00004D0100702D5012025B0F0BD249E0020B2 +:1017F000307023980025028810A8028518A8057566 +:101800006A4B68461972057404A8186020462C308B +:101810001B902A985860249E94463878721C0521A3 +:10182000039201282DD0022808D003287DD13078DA +:10183000800980011D303070B889A0803878022876 +:1018400004D13078800980011B303070F01C1FAA51 +:1018500001900292009110A8008D0022C01E83B258 +:101860002020015DB889F4F737FF0028DED1039806 +:10187000B9890170090A417010A9888FC01C0885B8 +:1018800028E1787B18AA10753A7B012A02D0022A37 +:10189000CCD1FCE022887F231B011A4010AB1A87B1 +:1018A000802A4AD006DC102A10D0202A0ED0402AE6 +:1018B0000AD124E0FF3A013A65D0FF3A013A79D0E3 +:1018C000FF3AFF3A022A76D00525A2E02078C0062A +:1018D00001D5082000E010201C9004206A461074F6 +:1018E000002090821AA81DAA1EAB039601920290B6 +:1018F00000933B8A20461C9AFFF79AF984E0228BDA +:101900003B8A9646934268D10A221C92002839D11C +:10191000039801906046401E1FAA83B202922020C5 +:101920000091015D0022704600E0BAE0F4F7D4FEB9 +:10193000014618A801750B201AE0228B3B8A9646B7 +:1019400093424AD10C221C92002862D10398019044 +:1019500060461FAA401E0292009183B22020015DC2 +:10196000628C7046F4F7B8FE014618A801750D2088 +:10197000307010A8818F491C0185042168460174CC +:10198000218B818245E0238B3A8A9C469A4224D15E +:1019900012221C9200283CD1606A002813D0002239 +:1019A0006B4607C3638C07E0FEFF0000AC1300200A +:1019B00009F800000DE04BE02020015D6046F4F7DF +:1019C000A7FC18A9087513203070012010A90885FC +:1019D0001FE0398A228B914201D00425B6E01621FE +:1019E0001C91002815D11B98818802682046FFF7BA +:1019F00003FA18A9087500280BD11B983346016813 +:101A000080881AAA00F075F9054602281BD0042D1B +:101A100019D01B988088002811D06846007C0028C7 +:101A200004D004A82A99F1F7FAFD05460120694679 +:101A300008741B981B990068059000208880002D71 +:101A400048D0052D2ED06846007C032878D07DE054 +:101A500018211C91002806D0388A20832046B968B6 +:101A6000FFF7A0FAD5E72046183000902020015D4E +:101A7000237E01222046FFF7AFFA18A90875002837 +:101A8000ECD119203070012010A90885E6E72088E4 +:101A900001214902084010A90887FF38FF380228B1 +:101AA00006D0052510A92088098F884320804DE0A5 +:101AB000208F9849884290D116201C9038690028C0 +:101AC00005D06063B88A20870020608702E000208C +:101AD000C043208710A8008F7F21090102468A4356 +:101AE0000DD0782300220420B968FAF7DFFC38789B +:101AF000A07010A92088098F0843208002E0218867 +:101B0000814321806846007C002805D082484168D6 +:101B100004A8F1F784FD054618A8007D002815D01B +:101B20001C98707001203070208BB070000AF0702B +:101B300018A8007D3071052110A8018506E0FFE797 +:101B40007548416804A8F1F76AFD05467248017AB4 +:101B500020884005400E22D11B98808800281ED086 +:101B6000239A0026138810AA1385249A2A9B6F466D +:101B70004CC71B9A039412681AABFFF78DFA0546FF +:101B800002280CD00120694608741B982A99006825 +:101B9000059004A8F1F743FD05461B98868010A820 +:101BA000018D2398018028461EE600B597B00428D1 +:101BB00007D102206A461070019100216846F1F7B2 +:101BC0002EFD17B000BD10B5534C037800222168DC +:101BD000012B02D0022B42D126E00B78002B01D042 +:101BE000042B03D10A7122680321117021688388B4 +:101BF0000A79D200921D8B5221680A79D2000832EC +:101C00008918C2880A80216803890A79D2000A32B9 +:101C10008B52428920680179C9000C3142522168F7 +:101C20000879401C08711EE00A7482888A80216845 +:101C3000C288CA8022680189118122684189518144 +:101C4000C1682068C1606168F1F7E9FC01460228BB +:101C500007D02068007C002802D1002903D0812011 +:101C600010BD832010BD002010BD406B002800D0A7 +:101C7000012070478178012909D100880521C90216 +:101C8000884202D0491C884201D1002070470520BB +:101C90007047F7B586B00024684615460F46848124 +:101CA00005261AE004984178027809021143298038 +:101CB000811D019602940091417902790B02134330 +:101CC000C178827809020A43417800780902084302 +:101CD0003946F4F71DFB002806D104AA03A906988B +:101CE000FFF7BFF80028DDD0822800D1002009B01E +:101CF000F0BD10B51488844201D2052010BD172410 +:101D00001C701080421E581C491C09F09AF80020D3 +:101D100010BD0000FEFF0000AC13002030B50346EC +:101D2000002002460DE09C5C2546303D0A2D02D382 +:101D30000020C04330BD0A25684330382018521CAB +:101D4000D2B28A42EFD330BD70B50D46144608E0DA +:101D50000A2109F0DFF82A193031203A641ED177C0 +:101D6000E4B2002CF4D170BD10B5002310E0040AD9 +:101D700000020443A0B2CC5C44402006000F604047 +:101D80000407240C44402006C00C60405B1C9BB23E +:101D90009342ECD310BD000010B572B600F0DCF831 +:101DA00000280BD0EFF77CFAFAF7E1FD08F097FB7B +:101DB0006E490020C86288626D49086062B60020E2 +:101DC00010BDF3B5002501200007C06A81B0C043F3 +:101DD0000006000E04D167480068401C00D10125B0 +:101DE00072B600F0B9F8002802D062B60820FEBD35 +:101DF000EFF7ACF9EFF758FA5F4B604E00211A6825 +:101E0000CA40D2071FD00246CA40D20718D14AB2F0 +:101E1000002A07DA1407240F083CA408A400A41918 +:101E2000E46904E09408564FA400E419246892077A +:101E3000D20ED4402206920F012A04D0032A02D0E7 +:101E400062B65048FEBD491C2029D8D30198030032 +:101E500009F0A2FA142123232323232323230B0D88 +:101E60000F11131F1517191B1D2E002416E0012436 +:101E700014E0022412E0032410E004240EE00824FD +:101E80000CE009240AE00A2408E00B2406E00C24F4 +:101E900004E0052402E0072400E00624F0690121A3 +:101EA0000002000AC9070843F061002D04D009E0D0 +:101EB00062B601200003FEBD2C4D3348E862EFF707 +:101EC000F3F9A8622A49314808603149029808604C +:101ED000EFF7EAF9214608F0E9FAFAF70CFD08F005 +:101EE000EFFC08F065FB0198EFF7A8F9040062B673 +:101EF00003D0FFF751FF2046FEBD0020FEBD10B508 +:101F0000044600F029F8002800D0012020700020AD +:101F100010BD204908600020704710B50C461028FD +:101F200008D011280BD012280CD013280ED0012075 +:101F3000086010BD03CC083CFFF743FF0AE0FFF741 +:101F40002BFF07E02068FFF7DAFF03E01149206864 +:101F500008600020206010BD05480C4900688842D8 +:101F600001D10120704700207047000000050040AB +:101F7000640000200010001000E100E000ED00E02F +:101F800000E400E00110000000220000BEBAFECA1A +:101F9000980000200400002010B520380C460300F3 +:101FA00009F0FAF933A6AAAEB2B8BCC0C5E0DBE4CA +:101FB0001B1F23272C31373C41474D5054585C6040 +:101FC0006D71656974787C8084888C9094989C9FEE +:101FD000A2CACFE9F0F3D3D7F800206800F0DDF80B +:101FE000D6E0206800F0E1F8D2E0206800F0F5F8D3 +:101FF000CEE0207840B208F0C9F8C9E0207840B2BD +:1020000008F0E7F8C4E02078616840B208F0FAF818 +:10201000BEE0207840B208F00AF9B9E0207840B27A +:1020200008F015F9B4E02078217940B208F020F9E1 +:10203000AEE02078616840B208F04AF9A8E008F004 +:1020400056F9A5E0206808F05AF9A1E0207808F0D8 +:102050006FF99DE02068FAF738F899E02068FAF700 +:1020600038F895E021792068FAF73AF890E020688E +:1020700007F0D8FF8CE0206807F0D9FF88E02078CF +:1020800007F0D9FF84E007F0E3FF81E0207807F054 +:10209000E5FF7DE0207807F0F7FF79E0206808F0A1 +:1020A00010F875E0206808F012F871E0206808F078 +:1020B00014F86DE0206808F015F869E0206808F071 +:1020C00017F865E0206808F019F861E0206808F06A +:1020D0001AF85DE00846EFF751F859E0F0F787F994 +:1020E00056E0F0F7B4F953E02068F0F7BCF94FE0A0 +:1020F000206800F0E1F84BE0206800F0E9F847E0E4 +:10210000206800F0F0F843E02078A268616800F0F1 +:10211000F5F83DE0207800F006F939E0207800F08D +:1021200017F935E02078616800F027F930E0207871 +:10213000616800F03AF92BE02179207808F008FA7C +:1021400026E0206800F06BF822E02068FAF7FEFA3B +:102150001EE02068FAF7E2FA1AE007CC0C3C08F01F +:10216000F1FA15E0206808F044FB11E003CC083CCC +:1021700008F06FFB0CE0206808F065FD08E009E05E +:1021800003E0FFE708F077FD02E0206808F0AEFD0D +:10219000206010BD0120086010BD002101700846BC +:1021A00070470146002008707047EFF31081C9079F +:1021B000C90F72B60278012A01D0012200E0002284 +:1021C00001230370002900D162B6002A01D000204B +:1021D0007047012040037047E7E7EFF31081C9071C +:1021E000C90F72B600220270002900D162B6002029 +:1021F0007047F2E710B52848FFF7CFFF002803D05B +:1022000026A11D2008F0A7FF2348401CFFF7C5FFAB +:10221000002803D021A1212008F09DFF10BDF1B5B9 +:10222000224D6F6801261C48FFF7BFFF1A4C00289B +:1022300003D10026601CFFF7D0FF1D4A1D49012075 +:10224000506000BF00BF00BF00BF00BF00230B6095 +:102250004B60009B6B60106000BF00BF00BF00BF01 +:1022600000BF0868002802D148680028F9D04868F3 +:102270000028E4D1002E04D06F60601CFFF795FFAA +:1022800007E0601CFFF791FF0028D3D10248FFF759 +:10229000A4FF0020F8BDC2E79C0000207372635CBD +:1022A000736F635F6563622E6300000000E50040AA +:1022B00000E0004000E100405A495B4B0A685B497E +:1022C0009A42096801D18904890C01600020704795 +:1022D0005449554B0A6855499A4201D18004800CF3 +:1022E0004860002070474F494F4B0A684F499A4257 +:1022F00001D18004800C88600020704730B5494BC4 +:10230000494D1C684A4BAC4202D0102802D203E06F +:102310000E2801D3184630BDC30044481818016187 +:102320004261002030BD3F493F4B0A684049491C8B +:102330009A4202D0042802D203E0022801D30846C0 +:1023400070473C4A0121C00080180160002070479E +:102350003449354B0A683649491C9A4202D0042850 +:1023600002D203E0022801D308467047314A012116 +:10237000C000801841600020704770B5294A2C4B7E +:1023800014682D4E284D82005B1C9219AC4203D07C +:10239000042803D2116006E0022801D3184670BD5C +:1023A0008804800C1060002070BD70B51D4A204B61 +:1023B0001468214E1C4D82005B1C9219AC4203D064 +:1023C000042803D2106806E0022801D3184670BD25 +:1023D00010688004800C0860002070BD10B5134A9E +:1023E000164890600E200021C3009B1819615961A6 +:1023F000401C1028F8D300200F4A05E0022803D320 +:1024000083009B18196005E083009B181C68A404D6 +:10241000A40C1C60401C0428F0D310BD03490748DD +:102420008860704764000020BEBAFECA00F5014013 +:102430000820000000F0014000F8014000C0FFFF4C +:10244000FE48C07E7047FE4840687047FD48C07E29 +:102450007047FFB5F94E85B0706A346805686068EA +:102460000190306A0390298D0798401A80B202903B +:102470000898002804D0274638372046483002E024 +:10248000371D2846A0300090032038710598002899 +:102490001FD001287ED0022863D003287BD0EAA178 +:1024A000ED4808F058FE0898002806D0387903282F +:1024B00003D0E5A1E94808F04EFEA16A7069FAF779 +:1024C000B0FDB860216A606A814265D900990860F0 +:1024D00034E1306A002803D1DBA1E14808F03BFE7B +:1024E000288BE0494843421806980021002804D070 +:1024F0005043DD4908F00EFD411CA1610191AA88FD +:10250000D848002142430698002804D05043D649B9 +:1025100008F000FD411CE161306AD24A801CA062D3 +:10252000298BD04B5143019A891AD04A891809182E +:10253000A162AA7D01985A4340008018FF301930EB +:1025400020626062306A081AC949FF38153888422B +:10255000A9D2C84988427DD2BBA1C74808F0FBFD7B +:102560008BE0288BBF4AE16850430A180698002187 +:10257000002804D05043BC4908F0CCFC411CA161A8 +:10258000AA88B848002142430698002808D0504342 +:10259000B54902E03EE073E0CEE008F0BBFC411C30 +:1025A000E161306A002803D1A7A1B44808F0D3FD47 +:1025B000A620405BAB4A0028288BE16821D050431D +:1025C0000818A169401AA0622169A068A54A484379 +:1025D000A1694018A97D400051434018FF301730D1 +:1025E0002062A888E1695043411AA5480818606232 +:1025F000A06A316A401A9E49FF38553888423CD358 +:1026000051E750430818A169401A3168D638496823 +:102610004018D8E7284680300190C08C002802D0AE +:10262000306A002803D188A1964808F094FDA88854 +:102630008C49E3694843C01AA06201999C46CA8C40 +:102640002169A368521A4B43A16959186346534341 +:10265000C91800E011E0AA7D824B49005A4389184D +:10266000FF3117312162864941186162316A401A8F +:102670007F49FF3855388842C2D20120387112E7AD +:102680000898002803D03420005D00287ED1A88857 +:1026900074494843E169401A02994843A0622846B8 +:1026A00080300490C08C0028019825D0002803D0E9 +:1026B00065A1754808F04FFD04986A4AC18C0298DC +:1026C0000818E16948434000FF3017302062A888AD +:1026D0005043411A6A48081860626C4840680028F4 +:1026E00019D0A26A03990120511A614AFF3955395C +:1026F000914285D23871D6E6002802D0039800288E +:1027000003D151A1624808F026FD0198A16AD6388C +:102710000818A062D0E7FAF7F2F97269014610468C +:10272000FBF706FCA16A081A5149FF385038884265 +:10273000A5D2012009B0F0BD00980160009855496C +:1027400000684018F86028468030028A0799511ABC +:1027500009B2002904DD0599022901D0032100E016 +:10276000002179710E99002915D0028F002A1ED000 +:10277000418F4187A0352B7F491C4B4393420AD29E +:102780007979491E002906DD012100E00CE079710C +:10279000418F491C4187089838700898002808D054 +:1027A0003420005D002804D0022009B0F0BD0021D3 +:1027B000DFE708980121484020346075307FF27EC1 +:1027C0003946B37E9A4202D0FAF710FE04E00020A8 +:1027D000F076B07630607062002009B0F0BDF0B5E0 +:1027E0002A4F83B038680568416A2E460C68203647 +:1027F000717D00290AD0698E228D914206D1407ADE +:10280000002803D110A1244808F0A5FCFAF777F9B5 +:102810001E4F39684A6901461046FBF789FB3F683D +:102820000028796A096807D089880E4A51433A68B6 +:10283000D269891A08F06EFB698E2FE0B813002068 +:10284000B8000020E01300207372635C6C6C5F6C56 +:102850006D2E73302E630000310500003A05000034 +:10286000B7040000E204000040420F0033040000FF +:102870005C0800001D030000D4040000DC0400001C +:1028800094FBFFFFF50400001B050000A8000020DA +:1028900014050000FF0B000021060000228D131814 +:1028A000994202DB491C698602E0401C10186886C8 +:1028B000B07D002806D19421688E095B884201D141 +:1028C000401C6886388BFB4E401C388320464030C5 +:1028D0000190C1888088081A218D401E401887B257 +:1028E000C03418E03068F449406A002300794000A1 +:1028F000085A009323795B00C95A081881B2287DD1 +:102900000023FFF7A6FD00280FD001280FD0EB49C8 +:10291000EB4808F020FC6A8EB81A00B20028E1DA11 +:1029200001980821817005F0BDFF03B0F0BD688EED +:10293000401C6886EFE770B5DE4D09292B686A6890 +:102940007BD20C007C4424792419A7440463869626 +:1029500083A5A575A20000201062D17E042956D25D +:102960000B007B441B79DB189F4451510147516A8E +:102970000C68116808701168486010682030407D4C +:10298000002808D1FAF7BBF869680968096CFBF7F9 +:10299000CFFA002817DC6868228D0168498E9142C1 +:1029A00005D123468033998A8A1ADA8204E0891A8B +:1029B000962211530168498E21850268C16811640D +:1029C000C168416111E068680168098E228D8B1A27 +:1029D00022468032D3820168098E218501680B6C02 +:1029E000C3600B6C4361886C1062204606F0C8FB24 +:1029F000002821D0B3A1B74829E0D068506105F084 +:102A000088FA002818D0EF20AEA180001FE0ADA109 +:102A1000B1481CE0D07E042817D20100794409791E +:102A200049188F441212010B06F0E6FC002803D06F +:102A3000A4A1AA4808F08FFB70BD2DE005F09FFB14 +:102A40000028F9D09FA1A64801E09EA1A54808F062 +:102A500082FB70BDFDF7CBFD70BDD87E022806D08D +:102A6000D87E032806D0FF2096A1AB300EE0FFF7FA +:102A7000B6FE70BD00F013FC70BDD87E0228F6D003 +:102A8000D87E0328F6D0FF208EA1B83008F063FB73 +:102A9000F0E7FAF719F870BDFF208AA1C630D6E733 +:102AA000F3B50126834C904D81B00F46092945D2DC +:102AB00008007844007900188744042D38382D40E8 +:102AC000403838000121884800F0D0FB3946019891 +:102AD000FFF731FFE87E022826D160680468406A6B +:102AE0000768F9F7EAFFB988804A5143E269891A11 +:102AF000D639E162B72803D283200001081A02E028 +:102B0000081A7B494018E0627A48E16A814200D89D +:102B10000846E06205E00198FFF70DFFE87E022815 +:102B200002D128682030067503B0F0BD25600198F9 +:102B3000FFF701FF0020206003B0F0BDFF2061A17E +:102B4000623008F008FB03B0F0BD70B506460C46D5 +:102B500009291FD208007844007900188744040D21 +:102B600011110D1A1A1111000121634800F07EFBAA +:102B700021463046FFF7DFFE70BD3046FFF7DBFE33 +:102B800070BD4C4D5C4828603046FFF7D4FE0020F5 +:102B9000286070BDFF204BA1883008F0DCFA70BDC2 +:102BA000F0B5514985B0CA7E0026424C032A03D0B5 +:102BB0002831CA7E032A64D100252160002824D050 +:102BC00001280ED03FA14D4808F0C5FA2068002E1C +:102BD00005604562256054D049484560002005B035 +:102BE000F0BD0320887600E020BF2068C17E002968 +:102BF00003D0C17E827E9142F6D0C17E002902D0F0 +:102C000000268576E2E70126FBE700260327084633 +:102C10008F76C97E032903D0C07E00282DD02DE0F9 +:102C2000007F002803D127A1364808F094FA2068D5 +:102C3000067F684607714771F9F761FF0290FF2030 +:102C4000F530039001216846017069463046FAF775 +:102C5000CDFB2068007FFBF7F7F900280BD0206838 +:102C6000007FF9F731FF20680577C5768576056026 +:102C70000126456202E020BFEBE701262068857649 +:102C8000A4E70C2005B0F0BD10B5174800F04DFBCF +:102C9000194800F04AFB1C49002008751849487083 +:102CA00011494861144A506188769076014948601C +:102CB000086010BDA800002034B4010048280100BD +:102CC0005B0600007372635C6C6C5F6C6D2E73301E +:102CD0002E630000B6030000C3030000D60300000B +:102CE000DB030000E2030000B8130020E204000050 +:102CF00087F8FFFFEC060000E01300201E03000031 +:102D0000B80000207E02000008140020F8B5FF4E35 +:102D100005463068002401270004810FFC48006844 +:102D2000800F814204D0FF20FA49D03008F013FA16 +:102D30003068F94E0004810F30680006800F814230 +:102D400004D0FF20F349D13008F005FAF348C069F8 +:102D50003168800F0904890F884204D0FF20ED49B3 +:102D6000D23008F0F8F9EE480570EE4DEC76AC760E +:102D7000ED4EF476B476ED48077104606C627462CF +:102D80002C60EB4F346028467C6000F0CEFA304671 +:102D900000F0CBFAE74804757C706C617461AC7626 +:102DA000B476E54844600460F8BDE04908717047B6 +:102DB000F8B5DC490546CA7EDB48DF4C002A02D163 +:102DC000C27E002A03D0C97E022907D009E0DB4871 +:102DD0002160F9F725FE216808770AE0C17E002905 +:102DE00001D00C20F8BD2060D548F9F719FE216804 +:102DF0000877CF48456021680860D2484862284675 +:102E00000121BC30F9F790F9A035287F8007800FA9 +:102E1000401C28772068007F002803D1BD49CA489C +:102E200008F099F9F9F749FEC849884200D20846E6 +:102E3000C749401886B221680320C87604F084FF91 +:102E40002168086104F0A8FF01270025002826D08A +:102E500004F0A2FF21684A6A106008680121077027 +:102E60006846F9F7EAF868460078BA49000208F0BF +:102E700051F80F46F9F743FEF119FAF7D2F8216835 +:102E8000C86022680320107250721571107FD37EC3 +:102E9000111D967EB3420ED0FAF7A8FA0FE0F9F7AB +:102EA0002EFE3146FAF7BDF82168C8600868057043 +:102EB00008684770E5E7D576957615605562206815 +:102EC000058300202560F8BD7047F8B5954EF17E6A +:102ED000002903D19449C97E002901D00C20F8BDF6 +:102EE0000221F176914F934D77623560002438606E +:102EF0002C7500943979C0304A00974900798A5A74 +:102F00004000085A2346101881B222462046FFF797 +:102F1000A0FA002803D07F49904808F01CF92C61E2 +:102F20000120AC6028756C862C868D4884753968C4 +:102F3000088D401E088534830020F8BD10B57E48FA +:102F400001244068817E03290CD00168497800295A +:102F500006D0006A8349884202D9002405F03CF972 +:102F6000204610BD0024FBE77348406802681178D2 +:102F7000491C1170016A0068C26A914204D8007D40 +:102F8000012801D0012070470020704700207047C1 +:102F9000F8B5694D63482860416A00270C680068ED +:102FA000342126460F548036B17F002927D1007D79 +:102FB000032824D1F9F7A3FD29684A690146104680 +:102FC000FAF7B6FF00281ADD2D68674B6A6A296890 +:102FD000126892880091C9695A43511A07F09AFF02 +:102FE000218D401C4218009953480A862968B28AEC +:102FF0000B8ED21A12B2002A03DC0760F8BD2F60D4 +:10300000F8BD012220318A7521464031CA8889885D +:10301000514F511A228D491E89188EB20546C0346F +:1030200019E0496A09794900795A00220092028E12 +:103030002379007D5B00FB5A591889B20123FFF701 +:1030400008FA00280ED001280FD002280AD03149F2 +:10305000464808F080F829680868028EB21A12B251 +:10306000002ADEDA00202860F8BD28680068018E9A +:10307000491C0186EFE770B52F4900244D680628EA +:1030800076D202007A441279921897441820020EE0 +:10309000240D002000F08FF9EC76AC762C60002136 +:1030A00008466C6200F0E2F870BD1D480D680078BB +:1030B000EFF72AF9EC76AC762C606C6270BD0120DB +:1030C00000F079F90021084600F0D0F870BD2968B9 +:1030D0000320087570BD686A29680068CA698A603B +:1030E0008188214A51432A68D1600146C0310A8A49 +:1030F00002838A7B82754A8A82808A8AC280C98AD0 +:10310000018129680220087570BD31E000E400E00B +:1031100008E400E0C42C010018E400E000ED00E049 +:10312000A0000020B8130020E0130020B000002011 +:10313000B800002008140020A8000020A12A0100E7 +:103140004B2B0100A4000020C9020000F60500007E +:10315000BB0200001027000034B40100520300003D +:1031600028140020D9821300E204000007060000A2 +:10317000DD49DE4807F0EFFF70BD70B500280BD0C9 +:103180000024DB4D01280ED002282FD0EF20D64995 +:10319000C00007F0E0FF70BD00F06BF900210846A9 +:1031A00000F064F870BD686801684C70C47684767D +:1031B0000460D04E446201220021706800F063FF79 +:1031C00071680846C0318C72CC72FFF77EFE002811 +:1031D00003D0C549C84807F0BEFFF9F7DBFBC74875 +:1031E0006C600078EFF790F86C6070BD00F041F90A +:1031F0006868C4768476046000214462084600F062 +:1032000035F870BDBA494968CA7E022A08D10A68F1 +:103210001378002B04D150600968CA6A1018C8627C +:10322000704710B5B24A002952680BD0012906D068 +:10323000022906D0AC49B24807F08DFF10BD801EB0 +:1032400000E0401F106210BD08B50020C043694671 +:103250000880AC48C07E002801D0002008BD084688 +:1032600000F0F6F90028F9D0012008BD70B5A04C97 +:1032700005466268002908D0002A04D0FF209A4938 +:103280000D3007F068FF656070BD002A04D1FF2093 +:103290009549133007F05FFF0020606070BD38B5BE +:1032A000934C20680168497801291FD001216846A4 +:1032B000F8F7C3FE684600789349000207F02AFE3B +:1032C0002068426AC06812685118F9F7AAFE21689E +:1032D000C8608C4822680321824202D0108B0A28E1 +:1032E00010D2108B401C108351720DE07D21C068FC +:1032F000C900F9F796FE2168C86004F025FD216831 +:103300000861E6E702205072117200231371107FEA +:10331000D47E111D957EAC4202D0FAF767F838BD15 +:10332000D37693761360536238BDF8B5704C05467A +:103330001F27EE7E042E2DD230007844007900182D +:103340008744312801237148854203D0664970487B +:1033500007F001FF02202560A87600E020BF216869 +:10336000C87E002803D0CA7E887E8242F6D0CA7EFC +:10337000002A04D000228A760C27226010E0002266 +:103380008A760A604A6222600DE00120FFF708FC9D +:10339000074603E054495F4807F0DDFE002F02D0E6 +:1033A000E87EB042C5D1E87E002803D04E495A4895 +:1033B00007F0D1FEF8BDF8B54D4D01286A68516A95 +:1033C0000C6846D10879554940000B5A1068077DB2 +:1033D0000126032F06D0027D022A13D0007D01288A +:1033E00024D036E00027076110688760942000969B +:1033F000025BC420005D4000085AC01881B23B4601 +:1034000003201EE022468032D78C07610096C4203C +:10341000005D928A4000085AC01881B20023022041 +:10342000FFF717F8696809680E750CE0942000969C +:10343000025BC420005D4000085AC01881B200231E +:103440000120FFF706F8002803D02749344807F089 +:1034500082FEF9F79FFA29480078EEF755FF696870 +:10346000002008830B68228D5A86096820318875F0 +:10347000F8BDF8B51E4D002168680C46006842781A +:10348000002A01D0447027E00078002809D00121EB +:103490006846F8F7F7FD684600781B49000207F018 +:1034A00039FD6868426AC06812685118F9F7B9FDB9 +:1034B0006A68D060147103205072107FD37E111D92 +:1034C000967EB34202D0F9F791FF03E0D47694766A +:1034D0001460546268680483F9F75CFA074800785E +:1034E000EEF712FFF8BD0000C42C010056070000E3 +:1034F000A8000020B800002003070000A000002062 +:103500009D070000E013002010270000B8130020E2 +:1035100007020000130200001902000034B4010089 +:10352000BC060000F8B50024E948FEF73EFE00287E +:1035300025D1E84FC02026464643F51901462846C6 +:1035400007F0DEFC0120B8556C80E34900200870CC +:10355000E24A4A8080356962E149641C0870A962C8 +:10356000E049E4B208704A80A963032CE2D3D8484A +:10357000FEF733FED648FEF718FE002801D00C20D7 +:10358000F8BDFF211931D84807F0BAFCD64801210F +:1035900001704480D5490020087208750877D44925 +:1035A0008872CB48FEF719FE0020F8BD10B5C84858 +:1035B000FEF7F3FD002803D0CEA1282007F0CBFDB5 +:1035C000C348FEF7EAFD002803D0CAA12D2007F06A +:1035D000C2FDFFF7A7FF002803D0C6A1332007F0E4 +:1035E000BAFD10BD10B50446B948FEF7DEFD00284F +:1035F00001D00C2010BDBC490878002807D000205D +:103600000870B3482160FEF7E8FD002010BDB04807 +:10361000FEF7E3FD1F2010BD70B505460C46AC4813 +:10362000FEF7C3FD002801D00C2070BDAE4A5088C3 +:10363000A84202D11078002804D0A548FEF7CDFD9D +:10364000122070BDA2482260FEF7C7FD002070BDA9 +:1036500010B504469E48FEF7A8FD002801D00C20B6 +:1036600010BDA1480178002907D00020C043208068 +:103670009748FEF7B2FD122010BD40882080944884 +:10368000FEF7ABFD002010BD10B504469048FEF7D4 +:103690008CFD002801D00C2010BD2078002804D01B +:1036A0008B48FEF79AFD0C2010BD01202070884841 +:1036B000FEF793FD002010BD10B504468448FEF7C8 +:1036C00074FD002801D00C2010BD824A0021C020CA +:1036D0004843105C00280AD0C023002059435054AE +:1036E000881820607A48FEF778FD002010BD491C3C +:1036F000C9B20329EBD37648FEF76FFD1F2010BD3A +:10370000032805D2C0225043724A135C002B01D01B +:1037100012207047801808600020704710B5002202 +:103720000C46032809D2C02148436A490B5C002B90 +:1037300014D122704018606018E003280ED164484C +:10374000FEF733FD002809D167484188032902D1DB +:103750000178002904D05E48FEF73FFD122010BD1D +:1037600060605B48FEF739FD01202070002010BD2D +:1037700010B504465648FEF718FD002801D00C206D +:1037800010BD2088534A032804D2C0214843105C4E +:10379000002801D00020208000202188491C89B207 +:1037A0002180032900D300212180C0235943515C8B +:1037B00000290BD0401CC0B20328EED30020C04328 +:1037C00020804348FEF709FD122010BD4048FEF757 +:1037D00004FD002010BD70B505460E463C48FEF7BE +:1037E000E4FC002801D00C2070BD2888341D03287B +:1037F00004D303D0A04201D3002028800020361D2E +:103800001DD0394B33492A88521C92B22A80A242D9 +:1038100000D300222A80042A02D3A24217D301E057 +:10382000032A05D0C02672438A5C002A0FD002E02A +:103830001A78002A0BD0401CC0B2A042E3D300206B +:10384000C04328802248FEF7C8FC122070BD2048E3 +:10385000FEF7C3FC002070BD10B504461C48FEF7FF +:10386000A4FC002801D00C2010BD2078002804D032 +:103870001748FEF7B2FC0C2010BD01202070144840 +:10388000FEF7ABFC002010BD10B504461048FEF753 +:103890008CFC002801D00C2010BD217801200029CB +:1038A00002D0012905D008E061680A78002A09D011 +:1038B00003E061680A78002A04D00548FEF78DFC11 +:1038C0000C2010BD08700248FEF787FC002010BDD8 +:1038D000C00000205814002098160020FFFF0000B0 +:1038E000C1000020C6160020D8160020B8170020FE +:1038F000D81700207372635C6C6C5F64622E630087 +:1039000010B5282107F0FAFA10BD70B50546007809 +:103910000A0700090001120F1043287007290ED270 +:10392000080078440079001887440305030503075D +:103930000300062408E00C2406E0222404E000240E +:10394000F8A1572007F007FC687880098001204320 +:10395000687070BD00780007000F704710B5C01C7C +:1039600007F0F5FC10BD0A4610B5C11C104607F063 +:10397000EEFC10BD10B5093007F0E9FC10BD02786F +:10398000BF23C9071A40490E0A43027070470078E6 +:103990004006C00F704702785206520EC9010A4312 +:1039A0000270704770B50C460546C11C20460930B0 +:1039B00007F0CDFC20784006400E2070297849069B +:1039C000C90FC9010843207070BD70B515460E4679 +:1039D00004461F2A03D9D3A1A82007F0BCFB204628 +:1039E0002A463146093007F02CFA6078AD1D80096F +:1039F0008001A906890E0843607070BD70B5054648 +:103A000040780E468406A40E062C03D2C5A1B82029 +:103A100007F0A1FBA41FE4B21F2C00D91F242946E4 +:103A200022460931304607F00CFA204670BD70B5C9 +:103A300015460E4604461F2A03D9BAA1CC2007F02A +:103A40008AFB20462A463146093007F0FAF96078A9 +:103A5000AD1D80098001A906890E0843607070BD04 +:103A600070B5044640780E468506AD0E062D03D28D +:103A7000ACA1DD2007F06FFBAD1FEDB21F2D03D908 +:103A8000A8A1E12007F067FB21462A46093130460C +:103A900007F0D7F9284670BD0A78C2734A780274D5 +:103AA0008A784274C978817470470A78C2744A78F7 +:103AB00002758978417570474176090A81767047A9 +:103AC000C176090A017770474177090A8177704703 +:103AD000C175090A017670478175704720300279F7 +:103AE000C90652095201C90E0A43027170472030BB +:103AF0000279D206D20E49010A430271704710B50D +:103B00001F3007F019FC10BD417800788906890E36 +:103B10000007000F06D0012808D0022809D0062887 +:103B200010D10AE0891F1F290AD90BE00C2907D000 +:103B300008E0891F1F2903D904E0891F1F2901D824 +:103B400001207047002070474178007889060007FF +:103B5000890E000F042805D1062903D3252901D891 +:103B6000012070470020704770B401780907090FE1 +:103B700003292ED0052931D1411C827E0C46437E7B +:103B800011021943037FC27D1D02037EC67E1B0204 +:103B90001343827D407835438006800E22281DD154 +:103BA00006291BD31920C001814217D8FF26F436FD +:103BB000B54213D8002A11D0082A0FD88A420DD254 +:103BC0008B420BD8617F227F09021143814208D9C1 +:103BD00004E040788006800E0C2802D070BC0020E3 +:103BE000704770BC0120704710B5222107F086F99C +:103BF00010BD10B502788B07920892009B0F1A43F4 +:103C000002704278520952014270012908D00229FB +:103C100006D0032905D0FF2042A1E83007F09BFA27 +:103C200010BD01210A43427010BD10B502788B0708 +:103C3000920892009B0F1A43027042785209520177 +:103C40004270012907D0022905D0032904D035A1EB +:103C5000384807F080FA10BD01210A43427010BDB8 +:103C600000788007800F70470278EF23C9071A4059 +:103C7000C90E0A43027070474178C078C906C90E60 +:103C80000E2835D202007A44127992189744060918 +:103C90000C0F1215181B1E2124272A2D0C2929D0A0 +:103CA0002AE0082926D027E0022923D024E017297A +:103CB00020D021E00D291DD01EE001291AD01BE0E3 +:103CC000012917D018E0022914D015E0092911D0D4 +:103CD00012E009290ED00FE001290BD00CE00129D8 +:103CE00008D009E0062905D006E0022902D003E049 +:103CF0001B2901D8012070470020704770B5054688 +:103D0000C1700E2926D20800784400790018874433 +:103D100006131517191B1B151D1D1B1B1F150C2426 +:103D20001DE000007372635C756C5F7064752E63D8 +:103D30000000000001020000082410E002240EE050 +:103D400017240CE00D240AE0012408E0092406E011 +:103D5000062404E000249A499A4807F0FCF96878A0 +:103D6000400940012043687070BDC0787047C17140 +:103D7000090A01727047017AC2790802104370473C +:103D80004172090A81727047817A427A08021043AF +:103D90007047C172090A01737047017BC27A080239 +:103DA000104370474171090A8171704781794279E6 +:103DB00008021043704701717047007970474173E2 +:103DC000090A81737047817B427B08021043704768 +:103DD00070B4017AC37909021943431C857A1C46E1 +:103DE000467A2B023343657926792C023443C21C70 +:103DF000754E00798D1FB54215D8FF25F435AB42BD +:103E000011D800280FD008280DD888420BD28C4238 +:103E100009D8507A117A00020843B11D884202D8AD +:103E200070BC0120704770BC0020704710B5001DA9 +:103E300007F082FA10BD0A4610B5011D104607F0C2 +:103E40007BFA10BD4172090A81727047817A427A09 +:103E5000080210437047017170470079704710B530 +:103E6000001D07F081FA10BD0A4610B5011D10466D +:103E700007F07AFA10BD0A780273497841737047E7 +:103E8000027B0A70407B4870704710B50E3007F017 +:103E90006BFA10BD0A46014610B50E31104607F008 +:103EA00063FA10BD0A7882754A78C2758A780276FC +:103EB000C97841767047827D0A70C27D4A70027E61 +:103EC0008A70407EC870704710B5001D07F04CFA2C +:103ED00010BD0A4610B5011D104607F045FA10BD89 +:103EE0000A7802734A7842738A788273C978C173F8 +:103EF0007047027B0A70427B4A70827B8A70C07B6B +:103F0000C8707047017170474171090A817170472B +:103F1000C171090A0172704700797047817942794D +:103F2000080210437047017AC279080210437047B3 +:103F300001717047007970470171704710B5001D1D +:103F400007F012FA10BD0A4610B5011D104607F021 +:103F50000BFA10BD10B5001D07F006FA10BD0A4699 +:103F600010B5011D104607F0FFF910BD70B51546DC +:103F70000E4604461B2A03D91149144807F0EBF8F2 +:103F80002A463146E01C06F05CFF6078E9064009ED +:103F90004001C90E0843607070BD70B50546407899 +:103FA0000E46C406E40E1B2C03D90549084807F049 +:103FB000D2F82246E91C304606F043FF204670BD89 +:103FC000243D0100A10200007A0C0000F103000072 +:103FD000FD03000070B504460020A083208C1E461F +:103FE00048431546114606F0A3FF2084F0002946F9 +:103FF00006F090FF401C80B20146192269439202EC +:10400000E083914201DD401EE0837D2029460002CD +:1040100006F080FF401CA08470BD70B50A7BD206FC +:10402000D20E0A73002282758B181B7ADC075B089C +:10403000DD07E40FED0F2C195B08DD07ED0F2C19E0 +:104040005B08DD07ED0F2C195B08DD07ED0F2D195F +:104050005C08E307DB0F5B196508EC07E40FE41865 +:104060006B081B1984186374847D521CE318D2B248 +:104070008375052AD8D3D8B2252803D9E1A18A208F +:1040800007F069F870BD70B504460B462546264614 +:10409000214600202835C0368031032B0AD0002B62 +:1040A0003AD0012B41D0022B03D1A11C2846FFF7A7 +:1040B000B4FF70BD2880A871E871E8722873687336 +:1040C000A873A870E870287168716876A8832B4679 +:1040D00068842033987128859872E8752876E8738B +:1040E0002874D872187398731A752884FF22603563 +:1040F000AA709875088248828882C882088348839B +:104100004877C884A4221055088748872421085579 +:1041100060843070B07170BDC8848877A1882389AD +:104120000A462846FFF756FFBFE7C884F38A728A1B +:10413000A1882846FFF74EFF70BD70B504460346C0 +:1041400028348033054603290AD0002933D00129B9 +:1041500038D0022903D1A91C2046FFF75EFF70BDAD +:1041600000202080A071E071E07220736073A07362 +:10417000A070E070207160716076A0832146608439 +:104180002031887120858872E0752076E073207474 +:10419000C872087388730A752084FF226034A27085 +:1041A00088751883987618742421586148551877B3 +:1041B000A035287370BDA9882B890A462046FFF7D1 +:1041C00009FFC8E7586AA988C38942892046FFF7D2 +:1041D00001FF70BD70B5867D0D460446002E01D0EE +:1041E000252E01D9122070BD002A18D0287EE17D2D +:1041F00050430818252106F08DFEE1750846CA08CF +:104200004907490F834BAA18595C127A914308D089 +:10421000314606F07FFE491CCAB200200AE00020A9 +:1042200070BD2076002070BD002803D02118097CC5 +:10423000511ACAB22118497C91423AD32918097AF5 +:10424000C943CB07DB17D21A521E1206120E35D005 +:104250008B07DB17D21A521E1206120E32D04B07F2 +:10426000DB17D21A521E1206120E30D00B07DB17C4 +:10427000D21A521E1206120E2ED0CB06DB17D21AFD +:10428000521E1206120E2CD08B06DB17D21A521EAB +:104290001206120E2AD04B06DB17D21A521E120635 +:1042A000120E28D00906C917511A491E0A06120E05 +:1042B00026D0401C0528B7DB1F2070BDC00020762B +:1042C000002070BDC000401C2076002070BDC000E2 +:1042D000801C2076002070BDC000C01C207600200D +:1042E00070BDC000001D2076002070BDC000401DC4 +:1042F0002076002070BDC000801D2076002070BD9B +:10430000C000C01D2076002070BD70B50D4604466B +:10431000072904D9FF203BA15D3006F01CFFE0789F +:10432000502108406907490F88300843E070A078A1 +:10433000A72108401830A07060785E210840203026 +:1043400060702078BC2108404030207070BD017939 +:10435000490901D000207047002230B41146445C66 +:10436000491CE3076408E507DB0FED0FEB18640851 +:10437000E507ED0FEB186408E507ED0FEB1864088F +:10438000E507ED0FEB186408E507ED0FEB1864087F +:10439000E507ED0FA407EB18E40FE318D218D2B22B +:1043A0000529DCDB002A02D030BC0120704730BC7C +:1043B0000020704738B505460C466846FCF74EF8B5 +:1043C00000281ED069460020085620720921615637 +:1043D0000022411A00D549422035EB788B420FDC90 +:1043E000FF2B0DD0A17A491CC9B2A1722B79994239 +:1043F00002D8617A7F2903D160720020A072012265 +:10440000104638BD7372635C6C6C5F7574696C2E9A +:104410006300000044B40100F8B50024F74EFF200B +:10442000B470F0702546F64F06E0042D04D3FF204B +:10443000F4A1AB3006F08FFEFF212846A03148439F +:10444000FF213331C0194A1C0C540146FF3114546A +:1044500021310C754C75F178A94202D1B470FF215D +:10446000F170FF219D314A1C6D1C0C54EDB21454A7 +:10447000042DDAD30020FF21A0314143C919FF31B7 +:1044800081318C77401CC0B20428F4D3E048FFF798 +:10449000ABFB0021DE48FFF7E7FB0121DC48FFF71B +:1044A000A8FBDC49FF20087048708870C87008714C +:1044B0004871F8BDB0E71B20704710B4D04A002106 +:1044C000FF23A0334B439B18FF3381339B7F002B8B +:1044D00004D0491CC9B20429F2D30DE004290BD23F +:1044E000FF23A0334B439A180124FF328132947783 +:1044F0000170204610BC704710BC0020704730B4DB +:104500000025042825D2FF220146A0325143BC4A8F +:1045100089180B46FF3381339A7F002A19D0FF2474 +:104520003334621C655455541A46603A15755575F6 +:10453000B24AD478844202D19570FF20D070FF2017 +:104540009D304554FF319E310D709D7730BC012068 +:10455000704730BC0020704704280ED2FF2201466D +:10456000A0325143A64A8918FF318131897F002941 +:1045700003D0A8494871012070470020704710B44B +:10458000A449FF224979A03251439D4A82B089183B +:104590000A46FF322132937C6C462370D27C227112 +:1045A000237822795A40802A0AD022782223520680 +:1045B000520E5A435118016002B010BC01207047DE +:1045C00002B010BC002070479248FF214079A03112 +:1045D00048438B4981B041180846FF303330FF31E2 +:1045E0002131CA7C69460A7003780922097859404A +:1045F00080290ED0037869460B7009784906490E68 +:10460000491C914208D26A461178491CC9B21170FE +:1046100009E0002001B0704769460978090601D514 +:10462000002100E080210170012001B070470428C2 +:104630000ED2FF220146A0325143714A8918FF3140 +:104640008131897F002903D07249087101207047A8 +:104650000020704710B46F49FF220979A0325143FE +:10466000674A82B089180A46FF322132947C6B4631 +:104670001C71D27C1A701C781A7994420AD01A786C +:1046800022235206520E5A435118016002B010BC48 +:104690000120704702B010BC0020704738B55D485B +:1046A0000179FF20A0304143554808180146FF31E9 +:1046B00021318A7C6C4622700922FF303430037825 +:1046C0002478A34223D004786B461C701B785B06C9 +:1046D0005B0E5B1C934205D26B461A78521CD2B219 +:1046E0001A7006E06A461278120601D5002200E030 +:1046F00080220270087D401C0875087D497D884233 +:1047000003D140A1444806F026FD012038BD002019 +:1047100038BD4048FF210079A0314843384940184E +:10472000FF302130C17C807C814201D10120704763 +:10473000002070473748FF210079A03148433049B5 +:104740004018FF302130817CC27C092013464B4049 +:10475000802B0AD049065206490E520E914201D3CF +:10476000881A01E0511A401AC0B2704709207047F8 +:104770000022042813D2FF23A0335843204BC01833 +:10478000FF239F331B5C002B09D0FF300A702130C0 +:10479000027D437DD31A0B704275012070470020C3 +:1047A0007047042811D2FF22A0325043144A8018C7 +:1047B000FF229F32125C002A07D0FF302130027D99 +:1047C000407D101A08700120704700207047104982 +:1047D0000160704704280ED2FF220146A0325143E7 +:1047E000074A8918FF318131897F002903D009499F +:1047F000087001207047002070470000101800204A +:10480000141800207372635C646D5F712E63000086 +:10481000901E0020C70000205A020000AC49CA7850 +:10482000FF2A03D000210160084670478A78A94911 +:10483000012A02D001600120704700207047A6487D +:104840000178012907D001210170A4480178A0480E +:10485000C170012070470020704704280ED2FF224B +:104860000146A03251439E4A8918FF318131897F28 +:10487000002903D0994948700120704700207047F3 +:104880009349964BCA785B789A4206D18A78203948 +:10489000002A02D0016001207047002070478C4838 +:1048A0008E4AC1785278914209D1FF21C170801C93 +:1048B0000178002903D000210170012070470020F9 +:1048C00070478348854AC1785278914204D18078F4 +:1048D000002801D0002070470120704704280ED224 +:1048E000FF220146A03251437D4A8918FF318131B0 +:1048F000897F002903D07949C870012070470020C2 +:10490000704710B47549FF22C978A0325143744AE8 +:1049100082B089180A46FF328132147F6B461C70C0 +:10492000527F1A711C781A79FF3162403731802A20 +:104930000AD01A7822235206520E5A4351180160A7 +:1049400002B010BC0120704702B010BC00207047BC +:104950006248FF21C078A0314843614981B04118C5 +:104960000846FF309D30FF3181314A7F69460A7029 +:10497000037803220978594080290ED003786946CC +:104980000B7009784906490E491C914208D26A46C3 +:104990001178491CC9B2117009E0002001B07047BC +:1049A00069460978090601D5002100E080210170DF +:1049B000012001B070474948FF21C078A031484329 +:1049C00047494018FF308130417F007F814201D14B +:1049D000012070470020704704280ED2FF220146B4 +:1049E000A03251433E4A8918FF318131897F002925 +:1049F00003D03A498870012070470020704710B4F6 +:104A00003649FF228978A0325143354A82B089184D +:104A10000A46FF328132147F6B461C71527F1A7036 +:104A20001A781B79FF3137319A420BD06A461278D7 +:104A300022235206520E5A435118016002B010BC94 +:104A40000120704702B010BC002070472348FF21AE +:104A50008078A0314843224981B04018FF219D3120 +:104A6000095C6B4619700321FF309E3002781B7879 +:104A70009A4219D003786A46137012785206520E81 +:104A8000521C8A4205D26A461178491CC9B211707B +:104A900006E069460978090601D5002100E0802179 +:104AA0000170012001B07047002001B070470B4831 +:104AB000FF218078A031484309494018FF308130F8 +:104AC000417F007F814201D1012070470020704763 +:104AD00010180020F017002012180020C700002036 +:104AE00014180020F8B5FD4F0A46044600207978D6 +:104AF000FB4D0646002902D0012909D00FE0F949F3 +:104B0000497A00290BD0002A08D10120787005E0ED +:104B1000A97F002903D0002A00D17E700120797876 +:104B20002B23594349198B7F034311D0002A22D1EB +:104B30002A22A01C1F3106F084F966700420207020 +:104B40000120A07078782B2148434019867712E025 +:104B50002878012801D00020F8BD002A0BD166700A +:104B6000132020701C22A91CA01C06F06AF9A67153 +:104B70002E70DD48C6770120F8BDD948017800299C +:104B800001D080887047D9487047F8B5D44E0746A1 +:104B9000B07F00282DD13846FEF7DCFE002101252C +:104BA000D34C072824D202007A44127992189744F1 +:104BB0000305081F1F1F0A00217006E025702172DF +:104BC00008E0032000E002202070CA493846FEF7C2 +:104BD00015FF20723846FEF7DAFE6070C649384687 +:104BE000FEF7C1FEBD4CC54F20787F2807D101E0FC +:104BF0002172F8BDFF20C2A1543006F0ACFA207833 +:104C000038707F202070B577032002F0E7FEF8BDF2 +:104C100010B5002002F072FE002812D0FBF79CFBBA +:104C200000210120FBF7A0FABA48FBF7ACFBAE4C21 +:104C3000A06AFBF7ABFB2079032805D0022803D03C +:104C400006E000F0F3FD10BD01210020FBF716FC8B +:104C5000FBF7FBFBB04C6078002803D0FBF77DFF2F +:104C6000FBF7D9FB0320E07010BD70B59E4900280A +:104C7000CA8D08D0FF2A0DD25004000CC885FF2829 +:104C800008D9FF2005E0012A04D95008C88501D1C0 +:104C90000120C88591484268012A01D0002A01D12B +:104CA0000D224260D24317239B4C5A43637B3B2522 +:104CB000DB436B43D2184260C98D900C06F02AF991 +:104CC000617370BDF8B5944CE078022804D0E078A8 +:104CD000012801D00C20F8BD0020814A05462B2177 +:104CE000414389188D77401CC0B20228F7D3157054 +:104CF0006078002804D0FBF796FBFBF73FFF657058 +:104D0000794845778577C5778449257001228A7768 +:104D10000571A570CA760A774A77714E0146324608 +:104D2000736F7432B46FF66FD7688B60CC600E61AE +:104D30004F6112698A6105770020F8BD10B5764A87 +:104D40000023D3701371684B596318630120D0702E +:104D5000FFF7B8FF002803D069A1714806F0FBF9FE +:104D600010BDF1B582B00C2001906B480090C07866 +:104D7000012806D00098C078022802D00C2003B089 +:104D8000F0BDFBF7F0FA0020FBF7B1F8564C207F9E +:104D9000002837D0524920460F4682687437C368CE +:104DA000056946694A678B67CD67FE60806938612F +:104DB00000266677A677594DE87E002805D1287F22 +:104DC000002802D1687F00281AD0009800780028B7 +:104DD00016D02079032802D0022805D008E005214A +:104DE000504800F040FD03E003214E4800F03BFD39 +:104DF000A97E3846FBF7F3F80020019026770CE0F7 +:104E0000267703E00098C078022804D00098C07884 +:104E1000022828D00AE0002001900098C0780128DC +:104E200004D10099087300980221C170606B017869 +:104E3000002903D00178001DFBF714F9206B0178DD +:104E4000002906D0384A401CFBF777FE0099012064 +:104E500048700298A0623548FBF717FAFBF78EFA04 +:104E6000019803B0F0BD00990120C8700C2003B078 +:104E7000F0BD70B5FBF777FA274CE078022803D035 +:104E8000FBF77CFA0C2070BD012017496073C885C0 +:104E90000220FBF765FA2648FBF739F9254E002575 +:104EA000A0780321401C06F035F8A170885D012828 +:104EB00044D06D1CEDB2032DF2D3FFF7A9FE20798B +:104EC000002809D0012807D002283DD003283BD074 +:104ED0000BA1194806F03FF9002070BDD00000205A +:104EE000B41E0020F41E0020341F0020FFFF00002D +:104EF000D41E0020DD1E0020D61E0020FC1E002037 +:104F00007372635C6C6C5F64645F7363616E2E6369 +:104F1000000000006C1F0020541F0020141F002000 +:104F200051030000941F00206F1F00204CB40100AB +:104F300052B401002F1F0020EA030000C8B2FC4950 +:104F4000085CFBF7F6F8B8E7EEF762F8C4E770B56F +:104F5000F84C0125A577E37F002B01D03A2070BDE6 +:104F60000026002802D1A07B884209D1A173667770 +:104F70001146F14806F0EBF96577F04805702577A2 +:104F8000A677002070BD024600200123E949002ACF +:104F900003D0012A03D0122070478B7400E088747C +:104FA0000B774A767047E34A032800D151611076A7 +:104FB0000120107700207047E049012803D0032822 +:104FC00001D0002000E0012008717047D948017F1E +:104FD000002903D0407E002803D170474079002883 +:104FE000FBD00120704710B5FBF709FAFBF7FCF97D +:104FF000FBF708F9FBF7AAF9D04C6078002805D038 +:10500000FBF711FAFBF7BAFD002060700120207356 +:105010000220E070FBF7B2F9002010BDC7494871CB +:10502000704710B500F002FC10BDF0B5C44EC34D82 +:1050300083B0002810D0C348FEF766FD002804D1D5 +:10504000C048FEF781FD002806D0BA4C207903281D +:105050000DD1A07F00280AD0E87805286BD2010086 +:105060007944097949188F44666666F7F600E8784E +:1050700005287AD201007944097949188F44757559 +:105080007502EE00AF48FEF765FCAD498870AE488A +:105090000190807F002803D1FBF736F8002800D06C +:1050A000012000906878002813D00526761EF6B2FD +:1050B000FBF785FD0746022805D1002EF6D1A3494E +:1050C000A34806F048F80098002810D1012F0ED010 +:1050D00000909B4F9F4EB878072871D20100794409 +:1050E000097949188F446DFE056C6C6C280001200D +:1050F000EEE76878002803D0FBF795F9FBF73EFD53 +:105100008F48FBF7ABF9002801D17F203870FBF7FF +:1051100093F9009800280AD02079012801D00228AC +:1051200005D1FBF76FF88748FFF72FFD37E2FBF754 +:1051300069F8FFF76DFD34E26878002803D0FBF7CB +:1051400072F9FBF71BFD7E48FBF788F9002801D1B7 +:105150007F203870FBF770F90098002879D020790B +:10516000022803D001287AD047E221E27548FFF7F0 +:105170000CFD012002F0C2FB00286ED07649714878 +:10518000FEF710FC7448FBF7FEF8607F00280ED095 +:105190006848019902898A824289CA828089088383 +:1051A00031466D48FEF7DAFB00206077A0770121D9 +:1051B0000846FBF763F9FBF703F90520E870F0E117 +:1051C0005BE16878002803D0FBF72DF9FBF7D6FCEC +:1051D0005B48FBF743F9002801D17F203870FBF7CB +:1051E0002BF90098002834D02079022808D0012813 +:1051F00035D0032837D05549584805F0ACFFD0E1E9 +:105200005048FFF7C2FC012002F078FB002824D0B0 +:1052100051494C48FEF7C6FB4F48FBF7B4F8607F96 +:1052200000280ED04348019902898A824289CA82A5 +:105230008089088331464848FEF790FB002060775C +:10524000A07701210846FBF719F9FBF7B9F805200B +:1052500001E10EE103E0BFE1ADE1B3E022E1394855 +:10526000FFF793FC9BE137482168C2780B7F9A4295 +:105270001DD102794B7F9A4219D142798B7F9A4294 +:1052800015D18279CB7F9A4211D10A462032C37957 +:105290001778BB420BD1037A5278934207D100783A +:1052A000CA7E4006C00F904201D1012000E00020DC +:1052B0006279012A30D0002800D138E7022002F0BC +:1052C0001DFB00287ED0012002F088FB22491D48EA +:1052D000FEF768FB2068018B1F48FEF7F9FB20688A +:1052E000817D00E03CE01C48FEF7F6FB1A48FBF726 +:1052F0004AF8607F002866D00E48019902898A82A8 +:105300004289CA828089088331461348FEF726FB0A +:1053100000206077A0779BE00028CFD109481C319E +:10532000FEF721FB0748FEF732FB2168C876C5E788 +:105330004FB40100341F00203C1F0020541F0020E8 +:10534000D00000206C1F0020141F0020004F01001F +:10535000D4040000281F0020941F0020CC0500006A +:105360006878002803D0FBF75EF8FBF707FCF948E4 +:10537000FBF774F8002801D17F203870FBF75CF848 +:105380000098002875D0FAF733FE002871D02079F4 +:105390000328F14804D0FFF7F8FBFAF733FFFEE0EB +:1053A0002168C2780B7F9A4220D102794B7F9A42C2 +:1053B0001CD142798B7F9A4218D18279CB7F9A4255 +:1053C00014D101E056E043E00A462032C379177851 +:1053D000BB420BD1037A5278934207D10078CA7E40 +:1053E0004006C00F904201D1012000E00020627908 +:1053F000012A32D0002800D199E6022002F07EFA7C +:10540000002837D0012002F0E9FAD449D248FEF74B +:10541000C9FA2068018BD148FEF75AFB2068817DCC +:10542000CE48FEF759FBCD48FAF7ADFF607F002864 +:105430000ED0CB4901980A8982824A89C282898921 +:1054400001833146C548FEF789FA00206077A077CE +:105450000120E0770620E870A3E00028CDD1BE4807 +:105460001C31FEF780FABC48FEF791FA2168C87635 +:10547000C3E7C2E000F0DAF993E06878002803D0CF +:10548000FAF7D1FFFBF77AFBB248FAF7E7FF0028FB +:1054900001D17F203870FAF7CFFFFAF7B3FEFFF79C +:1054A000B7FB7EE0AC48FEF755FAB070AA48AB49AE +:1054B000C3784A7A93421CD103798A7A934218D1ED +:1054C0004379CA7A934214D183790A7B934210D1EB +:1054D000C3794A7B93420CD1037A8A7B934208D1E9 +:1054E000007809784006C00FC909884201D101241B +:1054F00000E00024FAF786FEB07804283ED1002CA4 +:105500003CD09448FAF7AAFF002801D17F203070E0 +:10551000FAF792FF287B002802D00020FFF7A5FBB6 +:105520000120904C28738C4F607A002837D10420DA +:10553000E0723846FEF72BFA002801D0012800D18E +:10554000207389493846FEF70EFA88493846FEF737 +:1055500087FAE0741F2801D91F20E0743078844F47 +:105560007F2804D1FF208349543005F0F4FD3078C2 +:1055700038707F2030700120607210E07548FAF7B3 +:105580006DFF002801D17F203070FAF755FF287B8E +:10559000002802D10120FFF768FB00202873FFF7E5 +:1055A00037FBE87802283DD0E87804282DD127E0A1 +:1055B0007049714821E66878002803D0FAF733FF74 +:1055C000FBF7DCFA6348FAF749FF002801D17F2096 +:1055D0003070FAF731FF10E05E48FAF73FFF00281D +:1055E00001D17F203070FAF727FF287B002802D1F5 +:1055F0000120FFF73AFB00202873FAF703FECEE7FD +:1056000037205C49400105F0A6FD2879002809D023 +:1056100001280ED0022807D0032810D0554957483A +:1056200005F099FD03B0F0BDE878032807D003B07A +:10563000F0BDE878062802D0E8780528F7D10120E7 +:10564000FAF7D2FF03B0F0BD70B54D4CE0780728F3 +:105650005FD201007944097949188F445A5A5A5A3D +:105660005A030B003C48FAF78EFEFAF7EEFE0420D0 +:10567000E07053E0FAF7C3FEFAF7B6FEFAF7C2FDA0 +:10568000FAF764FE012626730220E070FAF776FE30 +:105690003C4D2878002803D036493B4805F05BFD97 +:1056A0000020A8702E4800684188A980C17EE97159 +:1056B000818B2981C18B6981018CA9818188E982D3 +:1056C000C188298300896883607928772F48304909 +:1056D000807EA8732F4805F03AFE6078002803D03A +:1056E000FBF76DFA012808D0687F40084000687712 +:1056F0002E70022002F072F910E0687F3043687764 +:10570000FBF776FA697F4000C907C90F0143697743 +:10571000EEE775201749000105F01DFDE07802282D +:1057200016D0E078032806D0E078042803D0114989 +:10573000194805F010FD2079002809D0012807D06C +:1057400002282DD003282BD00A49144805F003FD68 +:1057500070BD0000D00000206C1F0020941F0020AE +:10576000341F0020F41E0020011F0020081F00200D +:10577000271F0020004F01009E060000F5060000D4 +:10578000541F0020B41E002029070000141F002011 +:10579000281F0020C31E00205607000062070000DB +:1057A0000120FAF721FF70BD10B55C4CE0780528A8 +:1057B00020D201007944097949188F441B1B1B1919 +:1057C00002005748FAF74AFE002802D154497F20C8 +:1057D0000870FAF731FE207B002802D10120FFF784 +:1057E00044FA00202073FAF70DFDFFF711FA01E0EB +:1057F00000F01CF8E078022813D0E078032803D0EA +:105800004849494805F0A7FC2079002809D001281B +:1058100007D0022806D0032804D04249434805F0A7 +:105820009AFC10BD0120FAF7DFFE10BD10B5FAF7A3 +:10583000E6FDFAF7D9FDFAF7E5FCFAF787FD374CF4 +:105840006078002805D0FAF7EEFDFBF797F9002005 +:105850006070012020730220E070FAF78FFD0020B5 +:1058600002F0BCF810BD70B5314C054626466036D6 +:105870007434032943D0052940D1FEF741F80521AE +:105880002846FEF742F8B17E2846FEF778F8214612 +:105890002846FEF763F8274C284621680F31FEF7AB +:1058A000FBF8216828461331FEF7FFF82068817D58 +:1058B0002846FEF711F92068018B2846FEF708F903 +:1058C000206881882846FEF7F7F82068C1882846B6 +:1058D000FEF7F6F8206801892846FEF7F5F82168FA +:1058E00028460A31FEF70BF92068817E2846FEF72C +:1058F000F5F80A4841792846FEF7F9F870BDFDF73A +:10590000FFFF03212846FEF700F8B17E2846FEF788 +:1059100036F821462846FEF721F870BD541F0020B6 +:10592000D0000020004F010099070000A5070000EB +:10593000B41E0020341F0020F8B5FEF7FBFE04461D +:10594000FEF7BFFFF74E0546F0682030407B002889 +:1059500026D0012867D0022869D0032871D0FF2003 +:10596000F1A1793005F0F7FB3069F7220178114099 +:105970000170F2682032937BDB071B0F1943FB2376 +:1059800019400170D37BDB075B0F19430170577B14 +:10599000EF23022F60D0012F63D0032F65D06AE080 +:1059A000E548FEF76DFF002827D030690090F168C8 +:1059B000088DC9884018801D87B20098FEF7D5F978 +:1059C000012805D00098FEF7D0F9002808D00FE094 +:1059D000F06839468030C7850098FEF733FA07E053 +:1059E000F06839468030406A87800098FEF7E7F912 +:1059F000F168032020314873B6E7CF48FEF72AFE4E +:105A0000002804D0F0685321095C002907D0CA4857 +:105A1000FEF7DDFEF168012020314873A4E7022182 +:105A200020304173A0E7C448FEF7D1FE9CE7C2488E +:105A3000FEF710FE002897D1FF20BBA16B3008E0D5 +:105A4000FFE7BD48FEF71CFF00288DD1FF20B6A15F +:105A5000733005F080FB87E7012C08D8002D06D0B5 +:105A600009E06D1E2C4302D105E0002C03D0194043 +:105A70001023194300E019400170D17D002915D091 +:105A8000517B012912D0AD48FAF77DFCAC480121C9 +:105A90000176F268116E526E42610161A749326966 +:105AA000FAF7D7FF0020FAF7E3FF03E0FAF76BFC01 +:105AB000FBF701F801210846FAF7E0FC03203070FB +:105AC000F8BD08282FD203007B441B79DB189F44C4 +:105AD00003060B0E11152528002926D023E00229E4 +:105AE00023D0032921D01EE007291ED01BE008295E +:105AF0001BD018E00A390B2917D914E00D2914D04E +:105B00000C2912D0002A04D00D290CD315290CD948 +:105B100009E0112907D3152907D904E0092904D080 +:105B200001E0012901D0002070470120704730B505 +:105B3000054683B08048FEF771FE002803D17AA1A4 +:105B4000804805F008FB774C2069FEF74DF80321EB +:105B50002069FEF76AF82069EF2201781140017090 +:105B60002946FEF7CBF80D2D76D22800784400792F +:105B7000001887441F1606448080840E7280848437 +:105B800060006848C16800698031497FFEF763F9A9 +:105B900075E06448C16800698031497AFEF7CCF944 +:105BA0006DE06048C16800698031896A491CFEF770 +:105BB0003DF964E05B4CE0688030406A817920699F +:105BC000FEF7F9F8E0688030406A01892069FEF745 +:105BD000E9F8E0688030406A41892069FEF7C7F83B +:105BE000E0688030406A81892069FEF7C9F8E06882 +:105BF0008030406AC1892069FEF7CBF83FE0494C0C +:105C0000E0688030416A2069091DFEF728F9E068E4 +:105C10008030416A20690C31FEF72DF9E068803050 +:105C2000416A20691E31FEF730F9E1682069803150 +:105C3000FEF738F923E03B4CA06901782069FEF7B4 +:105C400061F9A06981882069FEF75EF9A069418841 +:105C50002069FEF75DF912E00DE000200090694632 +:105C60000190087801210843694608702D480069B1 +:105C7000FEF764F903E02CA1334805F06CFAFEF757 +:105C8000DEFD002803D128A1304805F064FA0C2D70 +:105C90000ED0072D0ED0012D0AD0002D08D0022DD8 +:105CA00006D020480021C068403041810121817325 +:105CB00003B030BD1B480021C0684030018203B0F2 +:105CC00030BDF0B5174C8DB02079C0077ED060791B +:105CD00000287BD16069C0780E2878D20100794411 +:105CE000097949188F44737306733D5DE25C73FD57 +:105CF0007334FCA5E06854210A5C2030417D01200A +:105D0000FFF7DFFE00284BD16069FEF7A6F8E168D7 +:105D10009E22505402223520425400204031887483 +:105D20008873EFE1D80000207372635C6C6C5F6D68 +:105D300061737465722E6300E8000020E21F00208A +:105D40000820002083060000C7060000CD060000E2 +:105D5000E0682030C17C0A297ED10021C1750D2167 +:105D60001DE0E0683321095C0E2975D1A421095892 +:105D700040884988814203D0FAA1FE4805F0EBF93A +:105D8000E0688030416A60692631FEF7A2F8E16878 +:105D900060698431FEF7ADF8E06811212030C174EC +:105DA000B0E1E1683320405C112855D180318C4648 +:105DB0004B6AF14810260022082168440E33B51AB8 +:105DC000ED18203DEF7F4770AD7F01E0A2E17AE161 +:105DD0008570801C491E921C0029F0D161464B6AD7 +:105DE00003A810260022082103301E33B51AED182F +:105DF000203DEF7F4770AD7F8570801C491E921C4F +:105E00000029F3D16846FCF746FA08AD8DCDE1686C +:105E100000260E664E660D4670318DC10126203576 +:105E2000EE75D64E8DC6D64805F09EFA1320E8745E +:105E300068E1E0683321095C112901D00E293AD1CB +:105E40004030007D002836D16069FEF773F8E168C4 +:105E50000B460A46803300E02DE0187200254031E1 +:105E6000CD748D73586A51884088884203D0BDA193 +:105E7000C44805F070F9E06801468030426A157048 +:105E8000826B1378002B03D0D920B6A1800033E0B9 +:105E90004B88D380836B027A1A71826B1572836B85 +:105EA0000B221A70806B4988418008E1E068332139 +:105EB000095C152902D00220607123E1014600250A +:105EC0004031CD748D73A42109584088498881429E +:105ED00003D0A4A1AC4805F03EF9E068014601E01A +:105EE0002CE094E080314A6A15708A6B1378002B9D +:105EF00005D071209BA1C00005F02DF9DFE003461D +:105F000040331E7D002E0BD01D754388D3808A6BD5 +:105F100015718B6B0C221A70896B40884880CEE01B +:105F20004388D3808A6B15718B6B01221A728B6B3D +:105F30000B221A70896B40884880C0E0E0685421C9 +:105F40000A5C2030017D0020FFF7BBFD00280DD149 +:105F5000E06854210A5C2030C17C0720FFF7B1FDC6 +:105F6000002803D16079012108436071607900281D +:105F70004CD1E0684030807D800715D46069FDF722 +:105F8000CBFFE1684031C8756069FDF7C7FFE16884 +:105F9000403108836069FDF7C6FFE16802224031A5 +:105FA0004883887D10438875E068014640318A7DCA +:105FB000D20716D10A7D2030017D0020FFF781FD38 +:105FC000002803D167A1714805F0C5F8E0680121F8 +:105FD000342211540623A02213544030817400212E +:105FE0000182E06801462031CA7C012A03D10022E7 +:105FF000CA744E210A54A421095840884A88824212 +:1060000004D1087806287DD1002008707AE0E06885 +:1060100054210A5C2030C17C0620FFF752FD002885 +:1060200003D160790121084360716079002869D14A +:1060300069466069FDF793FF68460078C107C90F9C +:106040006846017004D0E06801214030017703E028 +:10605000E068002140300177E06800254E210D54B2 +:10606000A421095840884988814203D03DA148486D +:1060700005F071F8E06802468030416A0D70816B6E +:106080000B78002B04D037A1424805F064F816E0E5 +:106090005388CB80816B6B460D71816B1B880B81A4 +:1060A0006B465B884B816B469B888B816B46DB889C +:1060B000CB81836B06211970806B51884180E06829 +:1060C0002030C5741EE0E06854210A5C2030017D58 +:1060D0000020FFF7F6FC002803D160790121084376 +:1060E0006071607900280DD16069FDF73EFEE168BE +:1060F0008922505405223420425400204031088225 +:1061000001208874E2680023916ED06E491C5841CA +:106110009166D0660DB0F0BDF8B5FAF770F9FAF7F0 +:1061200063F9FAF76FF8FAF711F9FAF7C4FCFAF71E +:1061300025F9194CE06820300079012801D1FAF7DF +:106140007BF9E068012502462032917D002908D1C3 +:10615000E178CB0701D1890703D59575012101F0BD +:10616000F9FB1BE07372635C6C6C5F6D617374654B +:10617000722E630021030000FFFFFFFF08200020B4 +:10618000212000205F03000083030000C303000000 +:10619000F1030000F6030000D8000020E07900269B +:1061A00000284FD100F06DFDF848FEF737FB0028BE +:1061B00048D06079002845D1E06854210A5C20303D +:1061C000417D0120FFF77DFC00283BD1E0680246BD +:1061D0008032117F002901D0022051E00346203394 +:1061E000D97C05292AD0E927FF000C292DD00D29BB +:1061F00029D0132943D01B7D012B4BD0052B42D036 +:10620000526A1378002B61D0528843889A425DD13C +:106210004030027D0020FFF754FC00287FD0E0686A +:10622000A42109580978891E062978D20A007A44DF +:106230001279921897443A3C7373658CD449D548C7 +:1062400004F089FFB6E00B201AE0F5F71AFF0C28DE +:106250007DD3E06808218030406A1E30F5F712FFD8 +:10626000002806D0E06804218030F5F70BFF0028F5 +:1062700003D1C749384604F06EFF032000E0062032 +:10628000FFF755FC96E00720FFF751FCE06820304F +:1062900006758FE00C20FFF74AFCE06801464030AD +:1062A000827D2A43827520310E7583E000200BE049 +:1062B0002030C17D00290AD0007E002803D1B449D6 +:1062C000B54804F048FF0A20FFF731FC27E0F5F756 +:1062D000D8FE0C2823D3E06808218030406A1E30A5 +:1062E000F5F7D0FE002806D0E06804218030F5F7ED +:1062F000C9FE002803D1A649384604F02CFF03202C +:10630000E2E74030807D800709D10C20FFF70FFCC9 +:10631000E068403046818573817D294381759B48C3 +:10632000FEF77CFA002845D0E06854210A5C203052 +:10633000C17C0020FFF7C5FB00283BD0E168AC2002 +:10634000405C002836D0E0690078002802D031E0B7 +:106350000820B9E7088D0A282CD905220A31206ABD +:1063600004F042FD002822D0E0688030816A08787D +:1063700000280CD00522491C206A04F035FD0028B5 +:1063800018D1E0688030806A0078002806D1E06883 +:10639000216A8030806A401C04F0CEFFE0688030C3 +:1063A000806A0178491C01700120FFF7C0FBE0689A +:1063B000A0300673E078C007E06802D040308680E5 +:1063C00003E040308188491C8180E0689C21095CA1 +:1063D000002908D154210A5C2030417D0120FFF7BB +:1063E00070FB002804D0E06840300189491C01811D +:1063F000E0793D21002804D0E0684030817045708C +:106400005AE0207A02280AD001280AD060790028B0 +:106410001AD0420701D4C2060AD51E21ECE7162184 +:10642000EAE7E0689E21095C40308170457043E0F6 +:106430000207E1D4C10705D1800703D45449574866 +:1064400004F089FE2A21D7E7E06802464032917BBA +:10645000002905D05389591C518191898B4213D24F +:10646000917C002905D0118A4B1C13829389994293 +:106470000AD21789D3889F4203D39C21095C002943 +:1064800002D191898F4203D322209070557013E07E +:106490003621095C0029918805D0994209D308204A +:1064A0009070557008E0062903D33E209070557017 +:1064B00002E05178002908D0E06801462031CE740E +:1064C0000E758E752570022101E02570002101F006 +:1064D00041FAF8BDF8B50C4616466946FDF710F9C5 +:1064E000002801D00020F8BD009800250246803029 +:1064F000816B0B78072B1CD0A71C0C2B29D00B2BE6 +:1065000034D0062B4CD01146A031087C0028EAD0AC +:10651000657012202070087C002808D0A2320D740B +:10652000108A6080508AA080087C0028F7D1012062 +:10653000F8BD002EFBD1657007212170816B0A2206 +:10654000A01C091D04F07DFC00988030806B057054 +:10655000EDE7002EEBD165700C212170816B8A88EC +:106560006280C988A180806B0570E0E7002EDED1D3 +:1065700065700B212170816B8A883A80CA887A8085 +:106580000989B980806B0570D1E70000E800002020 +:1065900064610100BE0500007905000032020000C0 +:1065A000002EC4D1657006212170816B8A883A80E3 +:1065B000CA887A800A89BA804A89FA808A893A81A7 +:1065C000CA897A81806B0570B1E7FE48007801289E +:1065D00001D00C2070470020704770B5F94C05467B +:1065E0002078002803D0F849F84804F0B4FD0020D2 +:1065F000A5616072012020702078012803D0F24943 +:10660000F34804F0A8FD70BDF8B5EE4C21780129DF +:1066100001D00C20F8BDE0608030807AFEF707F8EA +:1066200000283AD0E0688030807AFEF757F90028D9 +:1066300033D0E0688030807AFEF7CCF800282CD088 +:10664000E0688030807AFEF708F9002825D0F9F755 +:106650008AFE0026E6710120F9F749FCE068014650 +:1066600040318A7B002A03D04A898B899A4211D211 +:106670008A7C002A03D00A8A8B899A420AD20B8923 +:10668000CA88934206D236231B5C8988002B06D029 +:10669000914206D30120A0703BE01220F8BD0629EC +:1066A000F8D2A6701330F9F7F0FDE0680F30F9F773 +:1066B0002EFD0320F9F754FEE06805462030017EE8 +:1066C000002902D1C07D002809D0294670318EC929 +:1066D000C0488EC02946C048803104F045FE98204D +:1066E000405BA91C401C82B228462830FDF772FD91 +:1066F000002803D0B449B94804F02DFDE0684030CB +:106700000078F9F716FDF9F727FE01210020F9F7C7 +:106710002BFDE67026716671A6712672022020702C +:10672000E06880300683F9F729FE0020F8BD10B537 +:10673000F9F719FEA34C2078022803D0F9F71EFEC2 +:106740000C2010BDA078002802D0FFF7E5FC17E070 +:10675000F9F736FEFFF7F0F8E068203000790128FD +:1067600001D1F9F772FE607A002809D0012809D01A +:10677000022805D0032805D09349994804F0EBFC82 +:10678000002010BDECF744FCFAE770B505468030F8 +:10679000018B2C46491C01834034A188491CA180EF +:1067A000A17B002902D06189491C6181A17C00295B +:1067B00002D0218A491C2182007F002807D1352080 +:1067C000415D227D0120FFF77CF9002802D020895D +:1067D000401C2081284600F0EBF9002070BD79496B +:1067E00048727047774A1162D0617047F8B5754CAE +:1067F0002078032803D074497A4804F0ACFCE1689F +:1068000004272031887A0025002803D08D72207952 +:1068100038432071206901260278D2439207002A6A +:106820001FD1CA7A002A1CD1CE72217902221143CB +:106830002171FDF79AFA062802D00B2811D10AE03F +:10684000E06801462030C27C132A0AD100228A6601 +:10685000CA66067605E0E0682030C17C0D2900D1CB +:1068600005762079400704D5E0682030407D022875 +:1068700005D06079002802D1A079002802D0FFF766 +:106880004BFC2AE05848FEF73CF8002801D0657020 +:1068900002E0667055486061E0682030007E0028A4 +:1068A00011D05348F9F76FFD4A480576E268916EBA +:1068B000D26E426101614E4A6169FAF7CAF801205D +:1068C000FAF7D6F804E06069F9F75DFDFAF7F3F836 +:1068D00002210020F9F7D2FD2770207801280CD082 +:1068E000607A002809D0012807D0022806D00328A2 +:1068F00004D035493F4804F02EFCF8BD0120F9F7DB +:1069000073FEF8BDF8B52F4C05462078042803D057 +:106910002D49394804F01FFC002D71D0FAF7E3F837 +:106920000125002812D1E0682030017E00290DD019 +:1069300061694A78D20609D00978C07B0907C90F76 +:10694000814203D1E571FFF7E7FBACE0E06820305E +:106950000079012811D1F9F76FFDE168881C283111 +:10696000FDF728FD002808D0E068B22142880A52CD +:106970003121095CA030017505746069002600783A +:106980004007C10FE0682030827B914255D0407BA8 +:10699000002852D002280FD1FDF780FE002803D135 +:1069A0000949164804F0D7FBE2680023106E516EC7 +:1069B000401C594151661066E06820304673C17A28 +:1069C00001291EE0D800002064610100EF070000EB +:1069D000FB07000008200020212000203A080000CA +:1069E0007A080000AF080000EC000020C01F002063 +:1069F000E21F0020F3080000FB080000FD05000076 +:106A0000B1E014D1C6722079082108432071FDF746 +:106A100046FF002803D1FE49FE4804F09CFBE268D3 +:106A20000023106E516E401C594151661066E0689B +:106A30002030817B012948D08573606901788C46BC +:106A40000907CF0FE1680A462031CB7B9F420CD16A +:106A50006746BF07BF0F012F4FD0022F4DD0032F26 +:106A600035D06079042108436071E0782843E070F4 +:106A700020690078C00604D460690078C00600D49C +:106A800061E720790028FBD160780028F8D100F078 +:106A900056FF0028F4D060790028F1D1A0790028B1 +:106AA000EED1FEF749FF207801280DD0607A00284A +:106AB0000AD001285CD0022806D0032858D095209F +:106AC000D349000104F047FBF8BD8673B5E7FDF735 +:106AD000D3F800280CD0E068203085722179294352 +:106AE0002171C17B012901D1C673BEE7C573BCE723 +:106AF0006079102108436071B7E74078C7062CD051 +:106B00006378002BB1D1C006C00E1B28F0D84032EC +:106B1000127DC97C0520FEF7D4FF002804D0A0799F +:106B200008210843A071A0E7E07804210843E07041 +:106B3000FDF70EFF002803D1B549B74804F00BFB61 +:106B4000E0680023816EC26E491C5A41C2668166AC +:106B50002030C17B0129C9D1C6E7012B01D0CD73FB +:106B600083E7CE7381E7E07802210843E070EAE62C +:106B70000120F9F739FDF8BD10B5A84800780428C0 +:106B800003D0A349A64804F0E6FAFFF7C5FA10BD02 +:106B900036210A5C40308188091D002A04D0C08853 +:106BA000814203D3012070470629FBD200207047A1 +:106BB000F8B5054606462036F07C2C460027803482 +:106BC000072820D1288DE18D401C884258D1A16A28 +:106BD00028460A30491C04F0AFFB01220221284656 +:106BE000FDF7ABFAF77401215E204155A06A0078E9 +:106BF000002804D1A1208649800004F0ACFAA16AE3 +:106C00000878401E0870F07C082839D1616A288D08 +:106C10008988401C884233D1A06B0178002904D0B8 +:106C20007B49804804F097FA15E06988C180606A62 +:106C3000A16B40890881606AA16B80894881606A84 +:106C4000A16BC0898881A06B0771A16B07200870B8 +:106C5000A16B68884880012211462846FDF76DFA2D +:106C60000321284600F076FE606A698840888842E1 +:106C700003D067496C4804F06EFA606A0770F774D5 +:106C8000F8BDF8B5654C6079002875D120790126EA +:106C900040070025002815DAE0682030C07C022873 +:106CA00002D0052807D102E05949604801E058495F +:106CB0005F4804F050FAE0682030417D022901D19C +:106CC00026724575207908278007002840DA607908 +:106CD00000283DD12069C0780D2875D20100794483 +:106CE000097949188F4449350681FCFCBB1722FC01 +:106CF0005B71CA00E06854210A5C2030417D0120AC +:106D0000FEF7DFFE002823D1E0680321352211546D +:106D100040308573E2E0E06854210A5C2030017D58 +:106D20000020FEF7CEFE002870D1DDE0E06854219F +:106D30000A5C2030C17C0020FEF7C3FE002803D18E +:106D400033493C4804F007FAE06809212030C17457 +:106D5000CAE0E06854210A5C2030C17C0020FEF7C4 +:106D6000B0FE002803D12A49334804F0F4F9E06862 +:106D700007212030C174B7E0FBE0E06854210A5CD1 +:106D80002030C17C0020FEF79CFE002803D1204962 +:106D90002A4804F0E0F9E0682030C774A4E0E06815 +:106DA00054210A5C2030C17C0020FEF78AFE0028B6 +:106DB00003D11749224804F0CEF9E06853210E545C +:106DC0000A212030C1748FE08AE0E0682030C07C66 +:106DD0000D2803D00E491B4804F0BDF9E06854218A +:106DE0000E540C212030C1747EE0E06854210A5C0E +:106DF0002030C17C0020FEF764FE002828D1E06826 +:106E00004030007D002823D101491DE064E00000EE +:106E1000646101000E06000057060000D800002043 +:106E20005809000091020000A50200006A04000059 +:106E30006E040000AC040000B1040000B6040000C1 +:106E4000BB040000C20400009920C00004F083F9D4 +:106E5000E06853210E540E212030C17444E0E068F4 +:106E60002030C07C132804D04D204349000104F099 +:106E700072F9E06815212030C17435E0E068A42182 +:106E8000095843884A889A421CD10978062919D1A1 +:106E900054210A5C2030C17C0020FEF712FE00283D +:106EA00003D13549354804F056F9E06801464031D0 +:106EB0008A7D920702D42030C67403E08D7380303F +:106EC000406A0570E06854210A5C2030017D002092 +:106ED000FEF7F7FD002807D0E0684030857403E036 +:106EE0002549274804F037F9207900070AD5607949 +:106EF000002807D1E0682030417D032902D102211A +:106F000021724575FEF7DDFEA07900072ED5E068F9 +:106F100054210A5C2030C17C0520FEF7D2FD0028F8 +:106F20000BD0607938436071E0688030816B0878FD +:106F30000B2800D10020087018E0E07804210843F5 +:106F4000E070FDF705FD002803D10B490D4804F062 +:106F500002F9E0680023816EC26E491C5A41C26684 +:106F600081662030C17B012904D0C673E068FFF739 +:106F70001FFEF8BDC573F9E764610100DC04000081 +:106F8000F6040000EA020000F7B582B00646039856 +:106F900017468188FE48FE4A41430398039D008BB3 +:106FA00000245043009080352A7C002A0CD0F948F8 +:106FB000012A40683CD0022A1FD0032A38D0F6A10B +:106FC000F94804F0C8F84BE0002F04D17D20F2A16D +:106FD000C00004F0C0F8EF4C6068002803D1EEA1B7 +:106FE000F24804F0B8F86068A168001D0918F04A7A +:106FF000009880180C18012018E0791E084303D16E +:10700000E5A1EC4804F0A7F8EB48016800980C18DB +:10701000002F0AD0DF484168E8480818A04204D988 +:107020008120DDA1C00004F096F80320287415E04B +:107030000C46002F12D0D74F002806D178780028B0 +:1070400003D0D5A1DE4804F086F8DC48796808183A +:10705000A04203D9D0A1DB4804F07DF8002C03D175 +:10706000CDA1D94804F077F821466869F5F7D9FF32 +:10707000686100203070012434716869B060039841 +:10708000FFF786FD002801D0747104E0287C0128F8 +:1070900005D003207071CD48F06005B0F0BD02202E +:1070A000F8E7F0B5054687B00F46012000F01BFD5C +:1070B000C4B20B2000F017FDC0B2844204D0FF2000 +:1070C000B5A14D3004F047F8012000F00CFDC4B22A +:1070D000182000F008FDC0B2844204D0FF20AEA109 +:1070E0004E3004F038F83846B94F6C1E6900CD199F +:1070F0000026403D09287DD20100794409794918CC +:107100008F44044150504CE9E9E9A0000B2C04DB0A +:10711000FF20B0A1213004F01EF8E88F6946FCF78B +:10712000EFFA002804D0FF209BA1563004F013F89A +:107130000B2C04DBFF20A7A1213004F00CF80099F0 +:10714000E88F4988884204D0FF2093A1583004F08A +:1071500002F800988030007C002804D1FF208EA126 +:10716000593003F0F8FF8B484660467086600098FF +:10717000FFF74AFA002804D0FF2087A1603003F00F +:10718000EAFF07B0F0BDFFF7D2FA0028F9D0FF20E0 +:1071900081A1663003F0DFFF07B0F0BDF9F727FAF1 +:1071A00007B0F0BD0420C04300F09DFCC6B219201A +:1071B00000F099FCC0B2864204D0FF2076A1723064 +:1071C00003F0C9FF0B2C04DBFF2082A1213003F068 +:1071D000C2FFE88F6946FCF793FA002804D0FF202D +:1071E0006DA1763003F0B7FF0B2C06DBFF2079A1F1 +:1071F000213000E06FE003F0AEFF0099E88F49888E +:10720000884204D0FF2064A1783003F0A4FF0098E6 +:10721000FFF7BBFA002804D0FF205FA17B3003F00A +:107220009AFF009C0022214602A8FFF7ADFE8034A1 +:10723000A07E02A9F6F7DAF80099088D401C0885AF +:1072400007B0F0BD0B2C04DBFF2062A1213003F05E +:1072500082FFE88F6946FCF753FA002804D0FF202C +:107260004DA1863003F077FF0B2C04DBFF2059A1E2 +:10727000213003F070FF0099E88F4988884204D0DC +:10728000FF2045A1883003F066FF00988030007C25 +:10729000042804D0FF2040A1893003F05CFF009C4B +:1072A00080342674A57E4F4F681E0B2804DBFF2018 +:1072B00048A1273003F04FFF4548690008184038BF +:1072C000C787A07EF5F700FC4748A6760078EBF765 +:1072D0001BF807B0F0BDFF202FA193304FE770B52A +:1072E000424C0646E08B0025401C80B2E0832378A8 +:1072F0000A46002B09D021464968042B0BD0052BE8 +:1073000017D03D2024A1000102E0ED2022A1800041 +:1073100003F021FF14E00A2801D3022000E003203B +:107320007071002A0BD00320226900F0F5FB05469E +:1073300006E002207071002A01D02D4D00E00D46BC +:1073400029462069F5F76DFE002120613170012189 +:107350003171B060A068FF303130F06070BDF0B5C1 +:10736000074685B00E46012000F0BDFBC4B20B20DD +:1073700000F0B9FBC0B2844204D0FF2006A19E30C9 +:1073800003F0E9FE012000F0AEFBC4B2182031E0AA +:10739000E2040000302000207372635C6C6C5F6C50 +:1073A0006D2E6D302E6300001C040000E903000008 +:1073B0005504000003040000000100205F040000E9 +:1073C00016040000170400001F040000F60400006B +:1073D0005C2000207372635C6C6C5F6C6D2E6D3092 +:1073E0002E630000FFFF0000FC0000203C20002076 +:1073F000B80B000000F077FBC0B2844204D0FF203D +:10740000FD499F3003F0A7FE00250120FB4C092E0B +:1074100070D231007944097949188F44041A3737FA +:10742000336B6B18520060732073607800280ED1A4 +:10743000F348456085602573A068C338FDF791FC6B +:10744000002804D0FF20EC49B33003F084FE05B0DF +:10745000F0BD6178002909D0207B002801D1FDF71B +:10746000C2FD6573F5F796FA05B0F0BDA073FDF7A0 +:1074700000FD0028F8D0FF20DF49C73003F06BFE85 +:1074800005B0F0BDF9F7B3F805B0F0BD0420C04376 +:1074900000F029FBC4B2192000F025FBC0B28442E1 +:1074A00004D0FF20D449D53003F055FE012200213D +:1074B0006846FFF714FF69463846F5F797FF05B0B1 +:1074C000F0BD2078052804D0FF20CB49E13003F03F +:1074D00042FE207F002804D1FF20C749E23003F09C +:1074E0003AFE25772570207DF5F7EEFA257505B073 +:1074F000F0BDFFE7FF20C049ED30A6E7F0B5BF4C77 +:1075000087B020780026042805D02078052802D0EE +:107510000C2007B0F0BD01276770607B00250028B4 +:1075200027D072B6607B002808D0A07B002805D049 +:10753000FDF759FD6573A573F5F72CFA62B6207D4A +:10754000F6F782FD002827D0207F002808D0257775 +:107550002078052803D0A849AA4803F0FCFD0C2692 +:1075600065702570207DF5F7AFFA2575304607B0B8 +:10757000F0BD207D00900320694608734873F5F73D +:10758000BEFA04900020C043694605900F7202A91C +:107590000098F5F72BFFD2E720BFD0E7F0B597486A +:1075A00083B00078002801D0FFF7A8FF944F012096 +:1075B0003870FF26944D2D36002405E00B2C03D3A4 +:1075C0009249304603F0C7FD204601A9FCF798F820 +:1075D000002838D101988030007C002833D00B2C53 +:1075E00003D38A49304603F0B6FD2046AC422ED084 +:1075F0006946FCF785F8002803D08449844803F0E5 +:10760000AAFD00988030807EF6F71EFD002822D06B +:107610000098002180300174847E0C2C04D3FF205C +:107620007A49273003F097FD7A48610008184038FE +:10763000C58700988030807EF5F746FA00990020D3 +:1076400080318876B8E7641CE4B2032CB6D30020FE +:10765000387003B0F0BD20BFD3E710B500786E4C92 +:1076600000280FD001280CD068496C4803F073FD46 +:10767000A0686B49884203D364496A4803F06BFDF4 +:1076800010BD6948A060F3E710B55D4900220A709B +:10769000614C207059480270427002770273427345 +:1076A0008273826102752030574B0380052143802D +:1076B0008380001D491EFAD1100004D0002A04D096 +:1076C0005948A06005E0A26003E05049534803F028 +:1076D00042FDA0685249884203D34C49514803F007 +:1076E0003AFDFFF75BFF10BD70B5444C0E462178A4 +:1076F00084B01546002902D00C2004B070BDA061F2 +:107700008030007C002803D03B49484803F023FD2B +:107710004748464345434748ED1C30186660A5601E +:10772000854200D82846A0603549002088600521A0 +:10773000217060702077E0833F48F5F771F920757C +:10774000002803D12C493D4803F005FDF5F7D7F992 +:107750002061002201216846FFF7C1FD207D6946B6 +:10776000F5F744FE002004B070BD08B50020C0430A +:107770006946088021480078002801D0002008BD13 +:107780000846FBF7F5FF0028F9D0012008BD10B529 +:107790001A4C84B02278002A02D00C2004B010BD0C +:1077A000234A51435043C91C224AA160606080189B +:1077B000814200D80846A06000206070042121703A +:1077C000E0831D48F5F72CF92075002803D10A49FC +:1077D0001B4803F0C0FCF5F792F91A49F5F721FCB4 +:1077E0002061002201216846FFF779FD207D69466E +:1077F000F5F7FCFD002027E0987301003C200020F5 +:107800003020002076020000FFFF0000D47301004A +:10781000190300005C200020FC000020510500003E +:107820006A1800005A050000C40900008B0200001D +:1078300071020000B3FBFFFF5F73010097020000BD +:10784000C6020000B80B000004B010BD10B5E14C3A +:10785000A1690160FFF752FE0021A16110BD70B562 +:10786000DC4C84B02078052802D00C2004B070BD18 +:10787000A069002803D1D849D84803F06CFCA0695E +:107880008030007C002803D0D349D54803F063FC46 +:10789000A0698030807E002803D0CF49D14803F012 +:1078A0005AFCD148F5F7BCF8A1699A225054054614 +:1078B0004E88401E0B2804DBFF20C749273003F009 +:1078C0004AFCCA49680040184038C687A069803021 +:1078D000807E002803D1C049C54803F03CFC01224A +:1078E0006846A169FFF750FBA06969468030807E39 +:1078F000F5F77CFD0020A06104B070BD10B5BD4956 +:107900004C68983400280ED001280FD0022811D0DE +:107910003520B949000103F01EFCAE488068A04242 +:107920000BD9012010BDFF347934F6E7B120800077 +:107930002418F2E7FF346134EFE7002010BDAD48B2 +:107940004178002902D10078002801D0002070473A +:107950000120704770B504460422A84E803484B0DC +:1079600000290DD0012923D0022907D0032921D0D5 +:10797000A149A34803F0EFFB04B070BD227410E0EE +:1079800005469C4800780028F8D12946012268461F +:10799000FFF7FAFAA07E6946F5F728FD288D401C0E +:1079A0002885F4F7F7FF3078EAF7AEFC04B070BD35 +:1079B000032010E08188934A5143934A1160616A21 +:1079C0000A8902838A7982754A8982808A89C2807B +:1079D000C98901810220207404B070BDF0B5874EC2 +:1079E0000146307800257B4C85B0002908D001295C +:1079F00016D0022942D0032958D07F49834839E064 +:107A0000E583EAF781FC6078002849D1002211461D +:107A10006846FFF764FC207D6946F5F7E7FC3FE028 +:107A2000744F20697968774B401879494218A069EA +:107A300081884088594300F06FF8B1680546884254 +:107A400005D2A1696F4A88884243551903E06D4900 +:107A500003F060FAA1690883A06905218175008B94 +:107A600068494843281A6B49B860884204D32520E6 +:107A70005949400103F06FFB05B0F0BDE583EAF71B +:107A800043FC01202077A0692169803041610574A1 +:107A9000FFF7E5FE002803D04F495F4803F05BFB8A +:107AA000F4F778FF6573A57305B0F0BDEAF72CFC19 +:107AB00005B0F0BD704710B54E4A00290ED001291F +:107AC00006D0022906D04C49544803F044FB10BDAF +:107AD000401E03E05178491C5170001F506010BDDA +:107AE0003C48007870478107C90E00280BDA000770 +:107AF000000F083880084A4A80008018C069C840D2 +:107B00000006800F70478008464A80008018006891 +:107B1000C8400006800F7047F7B582B00D46064694 +:107B2000414F002406E00B2C04D3FF202A492D30BE +:107B300003F011FB204601A9FBF7E2FD00280ED15E +:107B400001988030007C002809D00B2C04D3FF2042 +:107B500021492D3003F0FFFABC4204D006E0641C3A +:107B6000E4B2032CDFD3002005B0F0BD6946204607 +:107B7000FBF7C6FD002803D017492C4803F0EBFAA9 +:107B8000A64204D1DD201449800003F0E4FA28481D +:107B9000341B44430098803041690498F6F7C8F9D3 +:107BA000041908D5281B66422946401E03F0C0F977 +:107BB0006843841B05E02946204603F0B9F9684371 +:107BC000241AAC4203D904491A4803F0C4FA2046E7 +:107BD00005B0F0BD3C200020D4730100E702000096 +:107BE000E9020000EB020000A37001005C2000200D +:107BF000EE0200003020002098730100FC000020FD +:107C0000ED040000E204000000010020190500005E +:107C10004E0600006A180000B3040000360500009C +:107C200000ED00E000E400E0FFFF00007103000051 +:107C3000770800008903000070B5F84E0446B0795B +:107C40000025012805D0F64E307A01280CD00020FE +:107C500070BD002915D1657014202070F149A01C59 +:107C600003F082FBB5710CE000290AD16570132086 +:107C700020701C22EC49A01C03F0E3F80120A07145 +:107C80003572012070BDE648007A002802D0E7482E +:107C9000808D7047E6487047F8B5E64801780029BE +:107CA00002D00C263046F8BD0026E04D34462E7535 +:107CB0006E75EE752E76AE75DF496E734E73D84FC6 +:107CC0007F217E718170687E002804D0F8F7ABFBBD +:107CD000F8F754FF6C763C72D848FBF711FED84891 +:107CE000FBF70EFEDEE770B5D24A00251570CC4ECC +:107CF000D44B35711966D8651078002805D0FF205F +:107D0000D1A17A3003F027FA70BDC84C257565758E +:107D1000E5752576A575C8486573457375717F202F +:107D20009070607E002804D0F8F77DFBF8F726FFFE +:107D300065763572C148FBF7E3FDC148FBF7E0FD0E +:107D400070BDBA48007D704710B5B849C87B897BC3 +:107D500042078307D20FDB0FC007D218C00F1018DD +:107D60004000052911D20A007A44127992189744EA +:107D7000090509020700B849085A10BDB74810BDE7 +:107D8000B74900E0B749085A10BDFF20AEA19A30AC +:107D900003F0E1F9002010BDA448B349008A48432C +:107DA00070479F488079002800D001207047F8B5BF +:107DB00006469E4C407BE07330790027A073012873 +:107DC00025D0308820829648B37B83719D4DA7488B +:107DD0002970114603F0BBFAB0796873F11DA4480D +:107DE00003F0B5FA607B0126002800D06675924842 +:107DF000407B002800D0A675A07B05284DD201004D +:107E00007944097949188F440409262B09002782EF +:107E1000D9E700218948FBF778FD25E00121874853 +:107E2000FBF773FDE91D8548FBF7A4FD687B00287F +:107E300007D001280AD0FF2083A1E83003F08BF996 +:107E400012E000217D48FBF7A6FD0DE001217B48F3 +:107E5000FBF7A1FD08E006217848FBF756FD03E09B +:107E600002217648FBF751FDE7752776691C7348B8 +:107E7000FBF774FD29787148FBF781FD04217048F8 +:107E8000FBF743FD691C6E48FBF768FD29786C48D9 +:107E9000FBF775FD26750020F8BDFF206AA1F230C2 +:107EA000CCE770B5614C012525765D4A127A002A2F +:107EB00001D03A2070BD634A13780022834205D175 +:107EC000E2756A4803F043FAE57500E02276002087 +:107ED00070BD70B50446554D0020A8752246654812 +:107EE00002F0AFFF544844730120A87570BD4C499F +:107EF0000871704710B54D4C0022627560730246E0 +:107F00005D4802F09EFF0120607510BD4449487134 +:107F10007047F8B5474D287800282CD1434C207D78 +:107F2000002828D0F8F71FFA0026A674E6746E70B1 +:107F30003046F8F715FA0020F7F7D9FF4F48F8F761 +:107F4000E6F84F48F8F7A1F9F8F73AFAE07B01278D +:107F5000C107002902D0A17CC9070ED0810712D524 +:107F6000A17C89070FD42620F8F7E3F8A07C022132 +:107F70000843A07413E00C20F8BD2520F8F7D9F8C9 +:107F8000A07C38430AE0400709D5A07C400706D40E +:107F90002720F8F7CEF8A07C04210843A074F8F756 +:107FA000DBF901210020F8F7DFF80F210520F8F7B1 +:107FB00022F8244D2978681CF8F711F8A07B0128D5 +:107FC0000AD0042808D0607D002805D0627B2A49A9 +:107FD0001A48FBF7FAFC6675A07D002806D0164803 +:107FE0002449427B9830FBF722FDA675286E017864 +:107FF000002903D00178001DF8F734F8E86D017806 +:10800000002904D01F4A401CF8F797FD6776F8F75F +:10801000B5F90020F8BD074948607047F4200020FA +:10802000D4200020FB200020DE200020B4200020EF +:10803000FFFF000008010020942000200421002000 +:108040002C210020742000207372635C6C6C5F61D3 +:1080500064762E630000000066B401009A89130064 +:108060006EB401005EB401007102000075200020B2 +:108070007B20002082200020A220002059B4010093 +:1080800056B4010057210020F8B50126FE4C0546E4 +:10809000002824D0E07B2146C207897C002A01D039 +:1080A000CA070BD082070FD58A070DD42620F8F710 +:1080B00040F8A07C02210843A07410E02520F8F7C6 +:1080C00038F8A07C3043F7E7400708D5480706D4C6 +:1080D0002720F8F72EF8A07C04210843A074E07C48 +:1080E00000280AD0A07B012804D14B20E7490001D9 +:1080F00003F031F800F0BDFAF8BD002D0CD00221DC +:108100000020F8F731F8E2480079032801D001286F +:1081100002D10220F8F768FAE07D002700280AD093 +:10812000DC4DDD48691CFBF719FC691CDB48FBF7DB +:1081300015FCE7752776D848F8F725F9A07B0528C0 +:108140000CD201007944097949188F440202020BCC +:10815000020001210846F8F791F903E0CB49D04825 +:1081600002F0F9FFE07BA17C884303D1A07B0128CA +:1081700003D0E674CB480670F8BDA774FAE710B5D3 +:10818000F8F7F1F8C7480078002816D1BE48007DFE +:10819000002812D00020FFF777FFBD4800790028A3 +:1081A00009D0012815D0022805D0032811D0B749DD +:1081B000BD4802F0D0FF002010BDF8F720F9F8F715 +:1081C00013F9F8F71FF8F8F7C1F8F8F7D7F80C200B +:1081D00010BDEAF71DFFEEE7B24901204870704775 +:1081E000F8B50024FAF7AAFE002822D0FF202D308F +:1081F000F7F7B7FFAB4D2878A54F01281CD0022810 +:1082000001D0032831D0CF20A049800002F0A3FF85 +:10821000287800280CD03879002809D0012807D008 +:10822000022835D0032833D09849A04802F093FFA4 +:10823000F8BD00F01EFAF8BD934EB07B032814D0B1 +:10824000707E002803D0F8F788FCF8F7E4F8984827 +:10825000F8F799F8B07B012812D0042810D0B8792B +:10826000012806D0032804D004E00120FFF70CFF0A +:10827000CEE7102421460E2001430020F8F7FEF837 +:108280007879012801D1F8F7E0F802202870BFE7DB +:1082900028780228CFD10120F8F7A6F9F8BD70B5EB +:1082A0007B48804C4079012808D18248F8F7D6F8FD +:1082B000002801D17F20A070F8F7BEF8724D687ECB +:1082C000002803D0F8F7AFF8F8F758FCFAF736FEB5 +:1082D00000280BD02078022804D0DD206B498000D4 +:1082E00002F039FFA87B012803D006E000F0C1F9B5 +:1082F00070BD99208000F7F734FF0120FFF7C4FE1E +:1083000020780028F4D020780128F1D05F496A480D +:1083100002F021FF70BDF0B5044689B00020069040 +:108320000190F7F7F1FE03905E480078022803D031 +:108330005649624802F00FFF554D6879012809D16E +:108340005C48F8F78BF8002802D156497F208870E6 +:10835000F8F772F85648FBF7FDFA4B4E0746002C2B +:108360006FD05348FBF700FC00286AD0F7F740FEB7 +:10837000002866D0707E00280AD00524641EE4B26E +:10838000F8F71DFC022811D0012800D00020019030 +:10839000474A4B4CD01C0290062F52D238007844EA +:1083A000007900188744B4B4B409B44E002CE5D168 +:1083B00044A1484802F0CFFEE8E7B07B012840D056 +:1083C00004283ED001990398084304D1A8790028D5 +:1083D00001D0022835D1687901281AD1A079002866 +:1083E00017D10120A07110784006C00FE0713A4803 +:1083F000029902F0ACFF2B4C384FA0787F2804D1B3 +:10840000532030A1000102F0A6FEA07838707F2032 +:10841000A0702248F7F7B7FF22480321017028799E +:10842000002877D0012808D0022873D0032804D070 +:1084300024A12B4802F08FFE6CE00120F8F7D4F85D +:1084400068E065E01348D178C07981424AD111488B +:108450001179037A994245D15179437A994241D1B0 +:108460009179837A99423DD1D179C37A994239D1B0 +:10847000117A037B994235D11178407B4906C90FA7 +:1084800081422FD101212EE0B4200020488001003C +:10849000D420002074200020042100202C21002062 +:1084A000DE04000008010020D1020000510300009A +:1084B000542100200A01002083030000C1030000B2 +:1084C000F42000207372635C6C6C5F6164762E63D1 +:1084D00000000000AB030000FC200020022100206F +:1084E000090400000021B07B012801D0042801D13B +:1084F00000290AD100280BD101990398084304D11F +:10850000A879002801D0012802D1307E00281FD090 +:1085100001200690707E002803D0F7F784FFF8F75B +:108520002DFB0698002802D00120FFF7ADFD73480F +:10853000017800290AD00178012907D000780328A2 +:1085400004D049206E49000102F005FE09B0F0BDDB +:108550006A486C4F4068397BC173797B0174B97B81 +:108560004174F97B8174684909784906C90FC1765D +:108570001C30029902F0EBFE6048397C4068C174FF +:10858000797C0175B97C4175F91E897D81750299E7 +:108590004A7D0B7D110219430183F91E8A7E4B7EB1 +:1085A00012021A438280029A537E177E1A023A43BD +:1085B000C2808A7F4B7F11021943018153490A30DF +:1085C00002F0BAFE52480179CA064C49D20E4968F7 +:1085D0008A7600794009C0310871287A002803D0D2 +:1085E00047494C4802F0B7FD0020A87243484B4968 +:1085F00047687888B085F87EE873B88B2882F88B56 +:108600006882388CA88244480078A875444802F0F3 +:108610009EFEB888F087F888208038896080C0374F +:10862000387920710198002860790BD00121084326 +:108630006071F8F7DDFA61794000C907C90F01439D +:10864000617102E0400840006071012028722B4CEB +:1086500000202070F7F7D3FEF7F7C6FEF7F7D2FD3C +:10866000F7F774FEF7F78AFE01206168FAF785FDD7 +:1086700050E7F8B5F7F7C3FEF7F7B6FEF7F7C2FD18 +:10868000F7F764FE274E0027707E002804D0F7F726 +:10869000CAFEF8F773FA7776184D2F70F7F76EFE6B +:1086A000B07B012804D000210846FAF766FDF8BD2A +:1086B00000210220FAF761FD1B4C207A002803D02C +:1086C0000F491A4802F047FD68780028EFD0124899 +:1086D000417BE1730078A0751549164802F037FE1A +:1086E0000E490F4802F033FE3C20A07268684088B3 +:1086F000B085012020726F70F8BD000008010020D5 +:10870000C48401005721002054210020732100203F +:10871000742100203D0400007420002075200020FA +:10872000EB200020B4200020D42000204F020000C5 +:108730007B200020E4200020F8B5FBF7FBFF044677 +:10874000FCF7BFF8FE4E054670692030407B0028DC +:1087500026D0012844D0022846D003284DD0FF203F +:10876000F8A19C3002F0F7FCB069F72201781140C3 +:10877000017072692032937BDB071B0F1943FB23C7 +:1087800019400170D37BDB075B0F19430170577BE6 +:10879000EF23022F3CD0012F3FD0032F41D046E0E2 +:1087A000EC48FCF76DF8002804D0716903202031F3 +:1087B0004873D9E7E748FBF74DFF002804D07069FC +:1087C0005321095C002907D0E248FCF700F87169E1 +:1087D000012020314873C7E7022120304173C3E7ED +:1087E000DC48FBF7F4FFBFE7DA48FBF733FF00286C +:1087F000BAD1FF20D3A18E3007E0D648FCF740F86D +:108800000028B1D1FF20CFA1963002F0A4FCABE745 +:10881000012C08D8002D06D009E06D1E2C4302D192 +:1088200005E0002C03D019401023194300E0194043 +:108830000170D17D002915D0517B012912D0C64885 +:10884000F7F7A1FDC548002101767269116E526EDD +:1088500042610161C049B269F8F7FBF80020F8F7FE +:1088600007F903E0F7F78FFDF8F725F9B06900780D +:10887000C00606D4F0690078C00602D4F07900285A +:1088800006D0B079002803D101210846F7F7F6FD9C +:10889000032030703079002803D1F7F791FD0120D3 +:1088A0003071F8BD10B5A649002348690246203052 +:1088B000C37483750120412398548032927F002A2B +:1088C00003D008700021022001E000210320FAF704 +:1088D000D2FB10BD06281AD202007A4412799218EF +:1088E00097440205090D101000290ED00FE0891ED3 +:1088F00002290AD90BE0891F012906D907E00829B6 +:1089000003D004E00B390B2901D801207047002067 +:10891000704730B5044683B08E48FBF77FFF0028D0 +:1089200004D1F52087A1C00002F015FC844DA86990 +:10893000FBF75AF90321A869FBF777F9A869EF2239 +:108940000178114001702146FBF7D8F90E2C5BD25B +:1089500020007844007900188744565606561F5A5E +:108960005A175642565A312B75485D224169525C5E +:10897000002A04D006218069FBF76DFA48E0C03177 +:10898000C9798069FBF767FA42E06D4841698069FF +:108990008031497AFBF7D0FA3AE0694D6969A869F4 +:1089A000B031FBF791FA6969A8698431FBF798FA4D +:1089B0002EE0634806218069FBF7BAFA28E0604D93 +:1089C00028690178A869FBF79DFA28698188A86958 +:1089D000FBF79AFA28694188A869FBF799FA17E02A +:1089E000002000900190564841694031097F0029DC +:1089F00005D06A461178012211436A461170694612 +:108A00008069FBF7A7FA03E04EA1554802F0A3FBEB +:108A1000FBF715FF002804D17F204AA1000102F0D6 +:108A20009AFB0C2C0AD0072C06D04548002140693F +:108A3000403041810121817303B030BD40480021A5 +:108A400040694030018203B030BDF0B53C4D064670 +:108A500068698DB020300079012801D1F7F7ECFC6E +:108A60000024012E1ED168692030017E002902D128 +:108A7000C07D002801D0F8F71EF8F7F7C0FCF7F723 +:108A8000B3FCF7F7BFFBF7F761FCF7F777FC687902 +:108A9000C006686902D58030048703E08030018F0A +:108AA000491C018768790226C107002901D1800786 +:108AB00013D568692030817D002902D0032907D0B1 +:108AC0000BE00121817500210120FAF7D4FA04E0BE +:108AD000867500210120FAF7CEFA68692030817D81 +:108AE000012903D16979090700D586751448807A70 +:108AF000002861D100F015FF1648FBF78FFE002813 +:108B00005AD00F4D287A002856D16869C621095CD1 +:108B100000290ED02030C17C0120FFF7DBFE0028A9 +:108B200007D168692030C17C0420FFF7D3FE0028FC +:108B300018D06869CB21095C062919D01FE0000014 +:108B4000100100207372635C6C6C5F736C617665FE +:108B50002E6300002801002080210020A821002091 +:108B6000EA070000686940300481447702204DE044 +:108B70002030C17C0420FFF7ADFE002815D06869C5 +:108B80002030C07C801E15287ED2010079440979EE +:108B900049188F449B9B9B1C9B9B9B979B1E9B9B5D +:108BA0009B243E9B9B9B9B9B900068695621095C84 +:108BB000C90702D0C030C472AEE00C20FFF7A9FE96 +:108BC000686901224030817D11438175A4E007204E +:108BD0001CE0FBF7F0FE00286CD00B2016E0F3F74A +:108BE00050FA0C2866D368690821B030F3F74AFAC6 +:108BF000002806D0686904218430F3F743FA00287E +:108C000003D1F4A1F74802F0A6FA0420FFF781FE91 +:108C100082E068698446C030807A042802D0052842 +:108C200039D079E06046E030007D002874D1EE490B +:108C30006046102600230822D8306944F51A2D1802 +:108C4000203DEF7F4F70AD7F8D70891C521E9B1CA5 +:108C5000002AF3D103A86346102608210330A83365 +:108C6000B51AED18203DEF7F4770AD7F8570801CF1 +:108C7000491E921C0029F3D16846F9F70CFB08AF96 +:108C80004ECFDA4D686900E020E070304EC005201C +:108C9000FFF73FFE0BE060464030017D002903D026 +:108CA00001214177022000E00D20FFF732FE6869C4 +:108CB000C030847230E00620FFF72BFE6869403038 +:108CC000847329E00920FFF724FE25E06869CA21A2 +:108CD000095C002920D0062906D02030C17C002064 +:108CE000FFF7F8FD002817D068690146C0318A7A7D +:108CF000072A11D213007B441B79DB189F440C0C0C +:108D00000C0C0C0C03004030807DC20700D154E7EE +:108D1000C043800700D18C72B44D2879002868695F +:108D200002D08030048303E08030018B491C018332 +:108D30006879C007686904D0A4210C54403084804D +:108D400003E040308188491C8180E879002806D002 +:108D50006969A0310879022806D8401C0871686941 +:108D6000A0300079022806D9686901468030048362 +:108D70004483A0310C7168692030C17C0020FFF76A +:108D8000A9FD002804D168692030C07C07284CD197 +:108D900068690146C0318A7A062A46D0C97A06290E +:108DA00043D03621095C02293FD1A0300079002848 +:108DB0003BD1FBF7AEFC002837D0FBF782FD002843 +:108DC00033D06869014680314A8A012A2DD90122AF +:108DD0004A77024640329688D288931E9E4201DB33 +:108DE000012302E0921B521E93B20A8BAE89B2425B +:108DF00001D3012202E0B21A521C92B2934200D96E +:108E00001346012B00D14C77C0300278002A10D0D5 +:108E1000498B4088814201D3012102E0401A401C65 +:108E200081B28B4205D90B4603E06869012380308B +:108E300044776A69118D1646C81883B2104680308F +:108E400083822036B77D002F25D0012F23D0022F1B +:108E50000CD0032F0AD05FA1654802F07CF9687935 +:108E6000C006686919D58030C4841BE0F67C032EE7 +:108E700009D0082E0FD04032D1889288891A891ED5 +:108E800059180182EBE740329688032E03D3D2882B +:108E90008918491CF5E70382E1E78030C18CC28A5A +:108EA0008918C18468690246C0329179002906D0C8 +:108EB0000146403196230E891B5AF3180B81A97A7B +:108EC0000426002913D002463D214032917001460C +:108ED0002031CC748C75012151708030807F002846 +:108EE00070D0297000210220FAF7C5F85EE0014633 +:108EF0002031CB7C042B48D02B7A002B1ED05A0774 +:108F000001D4DA0604D51E2240308270CE743CE0D3 +:108F10001A0704D53D2240308270CE7435E0D80760 +:108F200005D1980703D42BA1324802F014F96869DF +:108F30002A21422211542030C67426E04030837B1F +:108F4000002B05D047897B1C438183899F420FD228 +:108F5000D37A062B02D0927A062A05D1038A5A1CAC +:108F600002828289934203D20389C288934203D347 +:108F700022228270CE7408E08B7D002B23D0838860 +:108F800093423CD308228270CE7468694122014624 +:108F90002031CC748C75012111548030807F0028E1 +:108FA0002AD0297000210220FAF765F8F9F7EEFFC0 +:108FB00000282DD068690146FF300130827A002AEE +:108FC00022D025E018E08288062A18D33E2282703B +:108FD000CE74DAE77372635C6C6C5F736C61766598 +:108FE0002E63000039060000FFFFFFFF1001002084 +:108FF000790800004502000000210320D4E7012089 +:10900000287000210846CFE74988818101218172BB +:109010006869803084770DB0F0BDF8B50C4617460E +:109020006946FAF7F9FA002801D00020F8BD009847 +:109030000146E030027AF74E0025002A17D0002FB3 +:109040007DD1657007212170007A00280DD07169EB +:10905000E8204D8445540A22A01CEA3101F0F1FEBB +:109060000098E030007A0028F1D1A57067E0027D19 +:10907000002A2AD0002F62D1017D0D2920D20A00BA +:109080007A441279921897441B1B1B1B1B1B1B1B3A +:109090001B1B1B0F060065700C212170817DA170C8 +:1090A00071694988A18009E065700B212170817D7B +:1090B000A17071694988A180817EA17105753EE02A +:1090C000D549D64802F047F839E0027F002A15D08A +:1090D000002F34D16570082222707269FF315288E6 +:1090E000628001310A88A2804A88E2808A882281CF +:1090F000CA8862810989A181057720E0FF310131A9 +:10910000887A002808D0002F19D1657011202070AE +:10911000888960808D7212E0887B002886D0002FBD +:109120000DD1657012202070887B002807D08D73C8 +:10913000088A6080488AA080887B0028F7D10120B7 +:10914000F8BDB4480078012801D00C2070470020F9 +:10915000704770B5AF4C05462078002803D0AE4963 +:10916000AF4801F0F8FF00202561E0720120207077 +:109170002078012803D0A849AA4801F0ECFF70BD6F +:10918000F8B5A44D2978012901D00C20F8BD01269D +:10919000686180308677807AFBF749FA00282ED004 +:1091A00068698030807AFBF799FB002827D06869CE +:1091B0008030807AFBF70EFB002820D06869803071 +:1091C000807AFBF74AFB002819D0F7F7CCF86869DA +:1091D00000248030408A002825D09348FBF71EFBEE +:1091E000002820D06869C621095C00291BD02030E6 +:1091F000C17C0120FFF76EFB002802D013E0122093 +:10920000F8BD68692030C17C0420FFF763FB0028AB +:1092100009D168694030048144770220FFF779FB67 +:109220006869803044776869E821095C002905D1C4 +:10923000418CC288914201D9A98101E0C188A981EC +:1092400001468031CA8A521E93B20A8BD21892B25A +:109250000A830F7F002F02D04C830C7702E04F8BE4 +:10926000FF184F8305464035AF88FF18AF804D8A01 +:10927000012D01D86D1C4D82002B01D0A4231C545C +:109280002030C07C634D042817D0487F002816D0BA +:10929000A889824213D2FBF73CFA00280FD06869F4 +:1092A0000146C0310A78002A09D08030408B4988B5 +:1092B000884204D3AC70EE7003E0AE7001E0AC7095 +:1092C000EC7068699D210C543321095C062901D09A +:1092D000072917D1CC21028D095A511A09B2002948 +:1092E00010DB0146CE310A3002F04FF80122022194 +:1092F0006869FAF7C8FE6869CB210C5433210C5415 +:1093000040308677434D962168690A5A01462830D5 +:10931000891CFAF75FFFA87800284DD16869C02141 +:10932000095C002901D0803044830120F6F7DFFD7D +:10933000384D68691330F6F7A8FF68690F30F6F703 +:10934000E6FE0120F7F70CF8686901462030027E3E +:10935000002A02D1C07D002806D07031ACC9334844 +:10936000ACC0334802F000F8F6F7F6FF01210846DA +:10937000F6F7FAFE274D68698030006AF7F706F8BD +:109380002C48FBF7BEFA002801D06C7002E06E702A +:109390002948E86168692030007E002802D068789A +:1093A000002817D0E869F6F7EEFFF7F784FB686945 +:1093B00040300078F6F7BDFE164802214471C471B2 +:1093C000847104724472847204710170F6F7D6FFDE +:1093D0000020F8BD1848F6F7D6FF144806766A69EB +:1093E000916ED26E42610161134AE969F7F731FB70 +:1093F0000120F7F73DFBDAE710B5064C207802288C +:1094000001D00C2010BDA078002817D00020FFF755 +:109410001CFB2FE010010020D48F0100DD080000AC +:109420002D0900003809000028010020A821002093 +:10943000C12100202C01002080210020F6F793FF9D +:1094400001210020F7F71AF804202070606920300D +:109450000079012801D1F6F7F8FFE07A002809D059 +:10946000012807D0022807D0032805D0F949FA4877 +:1094700001F071FE002010BDE9F7CAFDFAE7F749D7 +:10948000C8727047F8B5F54C2078032803D0F1492D +:10949000F34801F060FE616901252031887A0028D7 +:1094A00006D0002088720D73A07904221043A071A9 +:1094B000A0690278D24392072BD1C97A002928D11A +:1094C000FAF753FC04281DD0052802D00B2819D127 +:1094D00011E0606901462030C27C102A12D10022BE +:1094E0008A66CA6605767031CCC9DE48CCC0DE48D3 +:1094F00001F03AFF06E060692030C17C0B2901D100 +:1095000000210176606902212030C572A0790843EC +:10951000A071A0690078C00606D4E0690078C00692 +:1095200002D4E07900280FD0607800280CD1A0790F +:10953000002809D1F9F718FD002805D0207A002865 +:1095400002D1607A002803D00120FFF77EFA1DE0E7 +:10955000C648FBF7D6F9002802D00020607002E070 +:109560006570C348E06160692030007E002802D049 +:10957000607800281CD0E069F6F705FFF7F79BFA42 +:1095800001210020F6F77AFF0420207020780128BE +:109590000DD0E07A00280AD0012808D0022819D07E +:1095A000032817D0A920AB49000101F0D4FDF8BD74 +:1095B000AF48F6F7E8FEAB4805766269916ED26E69 +:1095C00042610161AA4AE169F7F743FA0120F7F71E +:1095D0004FFAD5E70120F7F707F8F8BDF8B59F4C2B +:1095E00005462078042803D09A49A24801F0B3FD2B +:1095F0009A481027417939434171002D7ED0F7F701 +:1096000072FA0125002814D1944842692032117E53 +:1096100000290ED0C1694B78DB060AD00978D27BCD +:109620000907C90F914204D185720120FFF70DFA95 +:1096300054E18A4CE07800281ED0E0694178C906E0 +:109640001AD10078C00617D460692030007901284B +:109650007ED1F6F7F1FE6169881C2831FAF7AAFE7F +:10966000002875D06069C21D4388F932138220300A +:10967000007C907495732BE160692030007901289B +:1096800011D1F6F7D9FE6169881C2831FAF792FEEC +:10969000002808D06069C21D4388F9321382203047 +:1096A000007C90749573E069002600784007C10F34 +:1096B00060692030827B914242D0407B00283BD0C1 +:1096C00002280FD1FAF7EAFF002803D161496A485E +:1096D00001F041FD62690023106E516E401C59413A +:1096E00051661066606920304673017B012903D101 +:1096F0000673A1793943A171C17A00E0D1E0012953 +:1097000014D1C672A07908210843A071FBF7C7F8ED +:10971000002803D14F49594801F01DFD626900231B +:10972000106E516E401C59415166106660692030C0 +:10973000817B01292ED085736079082108436071EF +:109740004649C869496903781A07D40F203100E0F7 +:109750007FE0CA7B94420CD19B07404C9B0F012BAE +:1097600048D0022B46D0032B16D0207A0421084380 +:1097700020723A48417929434171C67181790907BC +:1097800004D541692031C97C032962D0017A0029BE +:109790005FD182E08673CFE76378002BE9D18D72C9 +:1097A000A3792B43A371012A10D0CD73FAF7DDFA08 +:1097B00006280DD00B28DCD1606901462030C27C20 +:1097C0000C2AD6D1C67540310D75D2E7CE73EDE7C0 +:1097D000606901462030C27C122ACAD100220A6682 +:1097E0004A66C57570319CC91E489CC0093001F09D +:1097F000BBFDBEE74078C30649D06278002AB8D1E5 +:10980000C006C00E1B283FD8C97C0520FFF762F8B0 +:10981000002804D0607A082108436072A9E76079C3 +:10982000042108436071FBF793F8002803D109492C +:10983000134801F090FC60690023816EC26E491CE0 +:109840005A41C26681662030C17B01291AD0C57396 +:109850008FE73DE0D48F01000D0A000010010020C9 +:10986000360A0000A8210020C12100202C01002080 +:1098700080210020A80A00000A070000220700003B +:109880007C070000C67374E7207A384370E7012A2A +:1098900001D0CD736DE7CE736BE7407A002817D106 +:1098A0001AE0F948022211434171C179491CC9B239 +:1098B000C17101290CD840692030007E00280BD0EE +:1098C000F2484078C106C90E052905D2C00603D06A +:1098D0000120FFF7BAF801E0FEF72EFFEA48017811 +:1098E00001290CD0C07A002809D0012808D002280C +:1098F00005D0032804D0E649E64801F02CFCF8BD69 +:109900000120F6F771FEF8BD10B5DF480078042895 +:1099100003D0DF49E04801F01EFC0120FFF795F875 +:1099200010BDF8B5D84C0427A07900250007002801 +:109930002FDA207A00282CD160692030C07C801E6C +:10994000132826D201007944097949188F44210946 +:1099500021212121212121212121212121212121F7 +:109960001A006069014640318D734A7F002A04D095 +:1099700006228A702030C7740BE016228A702030CD +:10998000C77406E0606901464031CD748D732030A4 +:10999000C57400F063F9BC4801268279500700289D +:1099A00022DAB948017A00291ED1406901462031E6 +:1099B0000B46C97C891E072916D20C007C442479E9 +:1099C0002419A744031111110B110E000146403157 +:1099D0008D73C030007A8870DF7405E0C030C672C5 +:1099E00002E00221C030C172A74C90074AD5207A0C +:1099F000002847D160692030C17C0120FEF76AFF52 +:109A000000283FD1A069C0780E287DD2010079449A +:109A1000097949188F44A7A706A73747630BA718EA +:109A2000A7279755616903202031C8749FE06069BA +:109A30002030C07C052803D09549984801F08BFB65 +:109A400060692030C57492E060692030C07C0928CC +:109A500003D08F49924801F07EFB60694E210D547E +:109A60002030C57483E060692030C07C0B2803D0AF +:109A700087498C4801F06FFB606953210E540C211B +:109A80002030C17473E060692030C07C0F2803D09F +:109A90007F49854801F05FFB606953210E54102116 +:109AA0002030C17463E060692030C07C102803D08E +:109AB00077497E4801F04FFB606912212030C17464 +:109AC00055E060692030C07C102803D07049784888 +:109AD00001F041FB606914212030C17447E06069E6 +:109AE0002030C07C162803D06949724801F033FB4E +:109AF000606901464030C5748573E031087D0028F7 +:109B000006D063492B2000E02DE0400101F023FB4B +:109B10006069014640310A7D002A08D00D754288EF +:109B2000F8210A520146E0318D750C2207E0418888 +:109B3000F82211520146E0318D758E760B220A759E +:109B40002030C57413E060690146C030827A062A6D +:109B500004D14031897D890700D58572C17A0629F3 +:109B600005D1C57203E04A49534801F0F4FAA079DF +:109B7000C00612D5207A00280FD160692030C17C40 +:109B800007290AD20A007A441279921897440505E7 +:109B90000505050503000721C174607A000727D574 +:109BA00060692030C17C0520FEF794FE002807D0B4 +:109BB000207A0821084320726069E030057517E0BB +:109BC000607938436071FAF7C3FE002803D1304949 +:109BD0003A4801F0C0FA60690023816EC26E491CE8 +:109BE0005A41C26681662030C17B012934D0C673D8 +:109BF00060693321095C08292DD10146028DC031ED +:109C00008B89521C9A4226D1227A002A23D14A8A71 +:109C100083889A4207D18B8AC788BB4203D1CB8AFB +:109C20000789BB4208D043888B85CA858A8A0A8601 +:109C3000CA8A4A86E8210E5401221146FAF723FA0D +:109C400000210420F9F717FA6069CB210D54203068 +:109C5000C57403218175F8BDC573C9E730B50A4CD9 +:109C600083B0A079C0077DD0207A00287AD16069BE +:109C70002030C17C0120FEF72DFE00284AD1E0698A +:109C8000C0780D286FD21BE0100100208021002039 +:109C9000D48F01000E0B0000160B000027050000FA +:109CA0002D050000340500003C05000043050000C0 +:109CB000490500005B050000BD0500009E03000093 +:109CC00001007944097949188F443B1506C14D4D6F +:109CD000FE24FD4D98B2FC00E069FAF7BEF8616918 +:109CE000C82250540222332042540020403148817F +:109CF0000120887385E160692030C17C0020FEF777 +:109D0000E9FD0028207A02D0002803D103E00121D8 +:109D10000843207275E1E069FAF798F86169CC228E +:109D200050520A8D801ABC4A00B290425FDC002873 +:109D30005DDDCE31E069FAF77EF8606906212030FA +:109D400083E060692030C17C0020FEF7C3FD00285D +:109D500003D1207A012108432072207A00284CD1B7 +:109D6000E06901E055E134E1FAF732F800282ED03D +:109D7000E069FAF728F86169CC2250520A8D801AFE +:109D8000A54A00B2904232DC002830DDE069FAF7E3 +:109D900014F86169C0318873E069FAF707F86169FE +:109DA000C0310882E069F9F7E6FF6169C031488295 +:109DB000E069F9F7E9FF6169C0318882E069F9F784 +:109DC000ECFF6169D62250520820203196E060698C +:109DD0002030C17C0020FEF77DFD002803D1207AD1 +:109DE000012108432072207A002806D100E12820B2 +:109DF0004222505404202031C87402E160692030AE +:109E0000C17C0020FEF766FD002803D1207A0121E5 +:109E100008432072207A00285FD160690022014641 +:109E200040304281012282730B202031C874E8E067 +:109E300060692030C17C0C2903D0217A02221143B1 +:109E40002172217A002948D10D21C174D9E06069BD +:109E50002030C17C0020FEF73DFD002808D160695C +:109E60004030007D002803D1207A01210843207270 +:109E7000207A002831D160690022014640304281B9 +:109E800001258573A831E069FAF704F86169E06992 +:109E90008031FAF710F86069E030007F002803D0C5 +:109EA0005E495F4801F057F96169FE204A884252D5 +:109EB000FF310131E069F9F7D7FF6169E069FF31EE +:109EC000093102E01CE056E008E0F9F7D9FF6069CB +:109ED000FC210D540F212030C17492E060690146CD +:109EE0002031CA7C122A03D0227A02231A4322721A +:109EF000227A002A6CD1403082731620C87480E028 +:109F000060690146C031CA7A002A06D0897A0629DA +:109F100003D0217A012211432172217A002970D1C4 +:109F20004030807D800715D4E069F9F7F5FF61695D +:109F30004031C875E069F9F7F1FF61694031088384 +:109F4000E069F9F7F0FF6169022240314883887DBA +:109F50001043887560690146C0318A7A062A01D1AA +:109F600000228A724030827DD2074AD10622CA720C +:109F70000021018245E060692030C17C0020FEF7AD +:109F8000A9FC002803D1207A012108432072207AFD +:109F9000002836D16946E069F9F7D5FF68460078B0 +:109FA000C107C90F6846017004D0606901214030C3 +:109FB000017703E060690021403001776069002289 +:109FC0000146403042810122827309202031C87449 +:109FD00017E060692030C17C0020FEF77BFC002880 +:109FE00003D1207A012108432072207A002808D169 +:109FF000E069F9F7BAFE61698922505405202031E1 +:10A00000C87461690023886ECA6E401C5A41CA66D2 +:10A01000886603B030BD0000FE7F0000D48F0100D1 +:10A020002104000047490968016000207047454944 +:10A030000860002070470121434A002803D001280E +:10A0400003D042487047916300E0D163002070471D +:10A050003F49012008603D48801C704704223D4B69 +:10A060003B49002805D05A60086901221043086165 +:10A0700008E008694008400008619A603249002001 +:10A08000C03188600020704731490622002808D07E +:10A09000012809D002280DD003280FD02B48401CDE +:10A0A00070470869904302E008699043801C08618A +:10A0B0000020704708699043001DF8E708691043C5 +:10A0C000F5E723494A6A02434A6200207047204963 +:10A0D0004A6A82434A62002070471D49496A01600A +:10A0E000002070471A49CA690243CA6100207047BC +:10A0F0001749CA698243CA61002070471449C96977 +:10A100000160002070471249024600204031002AB9 +:10A1100003D0012A01D0072070478A6370470D4998 +:10A120000420886008490020C03188600A4801681E +:10A130008022090A090211430160084901200860D0 +:10A140007047000000040040400000400420000070 +:10A15000000500400003004000E400E000E100E0F2 +:10A160008107C90E002808DA0007000F08388008A8 +:10A17000814A80008018C06904E080087F4A80001E +:10A1800080180068C8400006800F704710B504466C +:10A1900000F0DBF8002813D02046FFF7E1FFC0B243 +:10A1A00000F0E1F800280DD07549E2060B78D20ED8 +:10A1B00001209040002B08D04A681043486006E018 +:10A1C000704810BD6F48401C10BD6F4908600020EA +:10A1D00010BD10B5044600F0B8F800280BD068494F +:10A1E000E2060B78D20E01209040002B05D04A6881 +:10A1F00082434A6004E0634810BD634980310860CF +:10A20000002010BD70B50D46044600F09EF80028F1 +:10A210000BD05E480068E206D20E01219140084052 +:10A2200000D001202860002070BD564870BD10B5D8 +:10A23000044600F08AF8002807D0E106C90E012084 +:10A24000884052490860002010BD4E4810BD10B52E +:10A25000044600F07AF8002808D0E106C90E012073 +:10A2600088404A4980310860002010BD454810BD33 +:10A2700070B50D46044600F068F8002819D028464D +:10A2800000F071F8002816D0A007C10EFF228A4006 +:10A29000A807000E8840002C10DA2107090F0839A2 +:10A2A0008B0835499B005B18D96991430143D961FB +:10A2B0000CE0344870BD3348401C70BDA3082F49E2 +:10A2C0009B005B181968914301431960002070BD21 +:10A2D00070B50C46054600F038F8002805D0284631 +:10A2E000FFF73EFF2070002070BD264870BDBFF311 +:10A2F0004F8F21492648C860BFF34F8FFEE770B5E6 +:10A300001F4C05462178012000290ED1207072B61D +:10A3100000F0F4F81C4E803631688143616000F033 +:10A32000EDF8C043306062B600202870002070BD98 +:10A3300013490A78002A06D0002804D1124A486836 +:10A340001060002008700020704710B504462028D7 +:10A3500007DA00F0D3F80121A140084201D1012021 +:10A3600010BD002010BD012803D0032801D000201B +:10A37000704701207047000000ED00E000E400E0BD +:10A38000300100200120000000E100E000E200E0D8 +:10A390000400FA05F8B504468007002501260028C8 +:10A3A00004DA5848C563C66302208443E00404D538 +:10A3B0005548C563C66380148443600003D5534881 +:10A3C000456080058443E00504D55148C563C663F4 +:10A3D00080158443A00404D54E48C563C663401469 +:10A3E000844360042704C00FF90F884203D04AA1B8 +:10A3F000612000F0B0FEB80F0AD04C49CD634C4844 +:10A40000C563C563CE63C663C6630320800384430C +:10A4100020050AD5474FFD632F20E6F7C5FEFE63F2 +:10A420002F20E6F7C1FEF8148443F7F7D7FF424820 +:10A43000044203D038A18D2000F08DFEF8BDF0B5A8 +:10A4400000210A46FF230446CC40E4072AD04CB240 +:10A45000E606F60E0125B540384E3560384E3560BB +:10A46000002C11DA25072D0F083DAE08354DB6003A +:10A470007719FD69A407E60E1C46B440A5431446AF +:10A48000B4402543FD610DE0A6082F4DB6007619B6 +:10A490003568A407E70E1C46BC40A5431446BC40E3 +:10A4A00025433560491C2029CDD3F0BD70B5274C1C +:10A4B0000D462060FFF76EFF2068FFF7C0FF2846BB +:10A4C000E8F766F8F7F796FEF1F792FDF7F786FFE3 +:10A4D000FFF725FEE7F7E2FE00F06AF870BD10B561 +:10A4E0001A4C2068FFF756FF2068FFF7A8FFF7F720 +:10A4F00075FFE8F7C7F80020206010BD134800681A +:10A5000070470000C01F0040C0CF004000E5014080 +:10A51000C08F0040C0DF00407372635C736F635F85 +:10A52000636F6E6669672E6300000000C0EF004035 +:10A53000C0FF0040C0BF0040FEFF0FFC80E100E014 +:10A5400080E200E000ED00E000E400E038010020DF +:10A5500070B5002402460D4620462146002A1ED032 +:10A56000012A04D0022A04D0032A1ED103E00120CC +:10A5700002E0022013E003202B0000F00DFF07167D +:10A580000507090B0D0F1600012108E0022106E066 +:10A59000032104E0042102E0052100E00621F2F796 +:10A5A00058FA002801D0204670BD0724FBE70000C0 +:10A5B000B348002101708170704770B5B14D01231F +:10A5C0006B60B14B1C68002CFCD0002407E00E68C7 +:10A5D00006601E68002EFCD0001D091D641C9442FC +:10A5E000F5D30020686018680028FCD070BD70B5F5 +:10A5F000A34C0E466178884203D0A4A16F2000F0DE +:10A60000AAFD0325330000F0C7FE09520624245298 +:10A610005252524952002078022803D09BA1732045 +:10A6200000F099FD2570A078022802D0012804D0FE +:10A6300008E0A068E8F7C6FC04E02046083007C838 +:10A64000FFF7BBFF0020A070F2F7A4F904202070F0 +:10A6500070BDF2F754FA01466068F3F769FC0646EC +:10A660002078022803D089A1872000F074FD8B4A4E +:10A670008B498C48964205D86269032A02D2521C43 +:10A68000626102E0864207D84D71801BC860844930 +:10A690006078F2F7ABFE70BD032003E0A0780028DD +:10A6A000FAD10220F2F77EF800F0E1F870BD77A150 +:10A6B000B12000F050FD70BD70B50546F2F71FFAED +:10A6C0006F4C60602078012803D070A1B82000F0A2 +:10A6D00042FD73490220087000220A718D60042235 +:10A6E0004A71704ACA6020706078F2F77FFE70BDD0 +:10A6F00010B5634CA078002802D12078002801D042 +:10A70000112010BD6848F2F78BF96070607800285E +:10A7100004D0012020700020606110BD032010BD16 +:10A7200010B50124020B64040121604BA04202D247 +:10A730009140186802E0203A58689140084000D0E3 +:10A74000012010BDF8B50E46910005464F1914467C +:10A750003F1F0091E8F747FC009980028919091F03 +:10A76000B14201D2012200E00022002C03D0FF21DF +:10A7700001318C4201D90920F8BD4D498D4219D3D0 +:10A78000AF4217D3854205D2874203D228463043D1 +:10A79000800701D01020F8BD8E420BD3002A09D1CA +:10A7A0002846FFF7BDFF002804D13846FFF7B8FF61 +:10A7B000002801D00F20F8BD3E483F49006888427C +:10A7C00005D0224631462846FFF7F7FE0FE0FFF797 +:10A7D0008FFF0028EFD12A480121C66085600461FF +:10A7E00081702046302148431830FFF765FF002074 +:10A7F000F8BD10B504462E48800A84420BD3E8F712 +:10A80000F2FBA04201D8102010BDA0020446FFF7C1 +:10A8100087FF002801D00F2010BD26482649006878 +:10A82000884203D02046E8F7CDFB0AE0FFF760FF3F +:10A830000028F1D112480221846081701F48FFF77F +:10A840003BFF002010BD1A48010B01208840401E2C +:10A85000704700B50B460246FFF7F5FF104201D0E6 +:10A860000F2000BD114802604360002000BD10B5FC +:10A87000034C6078F2F728F900202070A07010BD1A +:10A880003C01002000E5014000E401407372635C7C +:10A89000736F635F666C6173682E630030750000D0 +:10A8A000D0210020D0FB0100EFA5010000060040F0 +:10A8B00000C0010064000020BEBAFECA3A56000083 +:10A8C000F94805218170002101704170C1708160DB +:10A8D000704710B5F5490A78022A07D0CA681018DF +:10A8E000C860C8689638F3F7DBFA10BD8A6810189C +:10A8F00088608868F6E70378ED49EE4A002B02D0BD +:10A90000012B10D014E00379002B01D0012B0FD1C3 +:10A910004379002B01D0012B0AD18368643B8B4221 +:10A9200006D2C06810E00379002B03D0012B01D0C0 +:10A93000002070474379002B01D0012BF8D1C36868 +:10A94000643B8B42F4D280689042F1D8012070477A +:10A95000F8B504460226F2F731FF0068002803D05C +:10A96000D5A1BD2000F0F7FB0127CF4D002C08D06A +:10A970002078002817D0012805D0022811D00328FC +:10A9800013D02F710DE06068C82808D3F3F7FEFAE2 +:10A99000002804D06068FFF79CFF012603E0002632 +:10A9A00001E000F0FDF93046F8BD28780028F8D124 +:10A9B0006068FFF7A0FF0028E3D0606800780028F7 +:10A9C00026D0A878042803D0BBA1F72000F0C3FB51 +:10A9D000B64F0020387060680079012800D0002050 +:10A9E000387160684079002837D004207871606839 +:10A9F0008168E868F2F715FBB8606068C068963057 +:10AA0000F8600320A870A949E878F2F7EFFCC8E7DE +:10AA1000A6480221017061680979012919D0002135 +:10AA2000017161684979002915D00421417161687B +:10AA30008968963181606168C968C160C0689A4C54 +:10AA400014346060F2F75BF820606F700220A87029 +:10AA5000A7E70321E4E70321E8E70320C6E7F8B509 +:10AA6000914C0D46E178884204D0FF2092A11A3023 +:10AA700000F071FB2846002501268C4F030000F0F2 +:10AA80008BFC0906123C5E82939DCAA6CA00A07880 +:10AA9000032807D0A078022804D0FF2086A11E300A +:10AAA00000F059FBF8BDA078032807D0A078022851 +:10AAB00004D0FF2080A1223000F04DFB0420A070C4 +:10AAC00025712078002815D1FFF703FF3878022878 +:10AAD0000CD0B868E0607F49886A7F4A02402261F2 +:10AAE0007D4AD24310408862002055E0E078F2F7BA +:10AAF000BFFAEFE700F054F9F8BDA078032807D0BB +:10AB0000A078022804D0FF206BA14B3000F023FB7B +:10AB10002078002802D000F04FF9F8BDA078032873 +:10AB20001ED104202BE0081AF8606049E078F2F7A3 +:10AB30005DFCF8BD0420F1F735FEA570F8BDA078E6 +:10AB4000032807D0A078022804D0FF205AA16C3037 +:10AB500000F001FB20780028DDD1A07803280DD07B +:10AB6000F1F7CDFF504E014614363068F3F7E0F9A7 +:10AB70000028DFDB71688142DCDBD4E70520F1F7D8 +:10AB800011FEA670F8BDA078042804D0FF204AA1C9 +:10AB90008D3000F0E0FA0220A1688847FFF7D8FE68 +:10ABA000FF260546C63642E0A078042804D0FF20E0 +:10ABB00041A1923000F0CFFA0120EDE7A0780428FF +:10ABC00098D0FF203CA1973000F0C5FA92E7A0781A +:10ABD00004280AD06078002802D0A078022804D087 +:10ABE000FF2035A19C3000F0B6FA2078002892D1E1 +:10ABF0002079002804D00620F1F7D4FD2571C0E7A4 +:10AC00006078002805D02949E078F2F7EFFB6570FD +:10AC1000F8BD0720B3E7FF2027A1B73040E7002D9C +:10AC20000AD0012D06D024A1304600F094FA022D5E +:10AC3000F5D1F8BD042000E00320A1688847FFF7A4 +:10AC400087FE0546F3E770B5050005D0164CA078E1 +:10AC5000052803D0112070BD102070BD1F48F1F7EA +:10AC6000DFFEE070E078002803D0A5600020A0702F +:10AC700070BD032070BD10B50B480178002901D0CC +:10AC8000112010BD817805292AD08178012929D089 +:10AC90008178002926D0012101708178012921D0F5 +:10ACA000807800281ED01FE054010020E021002001 +:10ACB0003D860100FF1FA1077372635C736F635FC2 +:10ACC000726164696F5F74696D65736C6F742E6314 +:10ACD0000000000000050040028100005FAA0100A2 +:10ACE0000F2010BD00F068F8002010BDF8B5394EF7 +:10ACF0000446B078002801D001280DD1002C0DD0D9 +:10AD00002046FFF7F8FD00280AD02078324D0028B1 +:10AD100008D0B078012823D00F20F8BD1020F8BD4E +:10AD20000720F8BD02272F702079012814D00020B9 +:10AD300028716079002811D004206871A0689630CD +:10AD4000A860E068E860E868224C14346060F1F7BD +:10AD5000D6FE2060B77019E00320E9E70320ECE796 +:10AD6000002028702079012816D0002028716079F1 +:10AD7000002813D004206871A168F068F2F751F937 +:10AD8000A860E0689630E8600320B0701249F0785F +:10AD9000F2F72CFB0020F8BD0320E7E70320EAE7E9 +:10ADA00010B50E48816A0E4A11400A4A12691143D1 +:10ADB0008162F1F7EFFD10BD10B5064CE078F1F7B8 +:10ADC00083FE0820F1F7EEFC0520A0700020207023 +:10ADD000607010BD54010020E021002000050040FB +:10ADE000FD7EFFFF70477047034610B50B439B077E +:10ADF0000FD1042A0DD308C810C9121FA342F8D0DE +:10AE000018BA21BA884201D9012010BD0020C043E0 +:10AE100010BD002A03D0D30703D0521C07E0002046 +:10AE200010BD03780C78401C491C1B1B07D103780C +:10AE30000C78401C491C1B1B01D1921EF1D11846F5 +:10AE400010BDF8B5042A2CD3830712D00B78491C07 +:10AE50000370401C521E83070BD00B78491C0370F3 +:10AE6000401C521E830704D00B78491C0370401C01 +:10AE7000521E8B079B0F05D0C91ADF002023DE1B53 +:10AE800008C90AE0E6F7A0F9F8BD1D4608C9FD406B +:10AE90001C46B4402C4310C0121F042AF5D2F308FC +:10AEA000C91A521EF0D40B78491C0370401C521E64 +:10AEB000EAD40B78491C0370401C012AE4D40978B9 +:10AEC0000170F8BD01E004C0091F0429FBD28B0703 +:10AED00001D50280801CC90700D00270704700298C +:10AEE0000BD0C30702D00270401C491E022904D3B4 +:10AEF000830702D50280801C891EE3E70022EEE76B +:10AF00000022DFE7020A08704A70020C8A70020E03 +:10AF1000CA707047002203098B4273D3030A8B4225 +:10AF200058D3030B8B423CD3030C8B4221D312E04A +:10AF300003460B437FD4002243088B4274D303099A +:10AF40008B425FD3030A8B4244D3030B8B4228D33B +:10AF5000030C8B420DD3FF22090212BA030C8B4261 +:10AF600002D31212090265D0030B8B4219D300E001 +:10AF7000090AC30B8B4201D3CB03C01A5241830B86 +:10AF80008B4201D38B03C01A5241430B8B4201D336 +:10AF90004B03C01A5241030B8B4201D30B03C01A5F +:10AFA0005241C30A8B4201D3CB02C01A5241830AD9 +:10AFB0008B4201D38B02C01A5241430A8B4201D308 +:10AFC0004B02C01A5241030A8B4201D30B02C01A32 +:10AFD0005241CDD2C3098B4201D3CB01C01A524199 +:10AFE00083098B4201D38B01C01A524143098B4222 +:10AFF00001D34B01C01A524103098B4201D30B010B +:10B00000C01A5241C3088B4201D3CB00C01A52412F +:10B0100083088B4201D38B00C01A524143088B42F4 +:10B0200001D34B00C01A5241411A00D2014652418D +:10B03000104670475DE0CA0F00D04942031000D3AC +:10B040004042534000229C4603098B422DD3030A01 +:10B050008B4212D3FC22890112BA030A8B420CD311 +:10B06000890192118B4208D3890192118B4204D33A +:10B0700089013AD0921100E08909C3098B4201D3BA +:10B08000CB01C01A524183098B4201D38B01C01AF4 +:10B09000524143098B4201D34B01C01A524103096B +:10B0A0008B4201D30B01C01A5241C3088B4201D31A +:10B0B000CB00C01A524183088B4201D38B00C01AC7 +:10B0C0005241D9D243088B4201D34B00C01A52419E +:10B0D000411A00D20146634652415B10104601D32B +:10B0E0004042002B00D54942704763465B1000D3B5 +:10B0F000404201B50020C046C04602BD70477047BF +:10B10000704710B500F058F810BD30B58C180278B3 +:10B11000401C13071B0F01D10378401C120906D1F4 +:10B120000278401C03E00578401C0D70491C5B1E32 +:10B13000F9D101E00B70491C521EFBD1A142E6D3AC +:10B14000002030BD012308CB134B1860134B19604E +:10B15000134B1A607047134A134B13607246053A3B +:10B16000F0E7114A0F4B1B689A420ED10D4B00209D +:10B17000186001980D4B04B598470CBC9E460246DA +:10B18000029800990A4B1B68184706980599094BC5 +:10B190001B68DB6818470000780100207C01002054 +:10B1A0008001002070010020EFBEADDE4D2F0000B9 +:10B1B00098000020040000201D481E497047FFF73A +:10B1C000FBFFE5F7BBFF00BD01200007C06AC0B26E +:10B1D000FF2804D1184819490968884202D0184844 +:10B1E00018490160184819490968884203D1184A6A +:10B1F00013605B68184700BD20BFFDE71248134984 +:10B20000096888420ED1134B18680B498842F3D065 +:10B2100080F308881049884204DD10480268022142 +:10B220000A4302600E4880470E4880470E48004798 +:10B23000F0210020F0210020FFFFFFFF0010001090 +:10B240002C05004008000000001000000000002055 +:10B250000400002000C00100002000202405004060 +:10B26000632F0000C9B1010045B1010013487045CA +:10B2700002D1EFF3098101E0EFF308818869023818 +:10B280000078102814DB202810DB2B280BDB0C4A5D +:10B2900012680C4B9A4203D1602804DB0A4A10471B +:10B2A000022008607047094A10470000084A10470A +:10B2B000084A12682C32126810470000FDFFFFFF99 +:10B2C00064000020BEBAFECAAD120000991F010042 +:10B2D0001B1F0100040000200D4B0E4908470E4BB8 +:10B2E0000C4908470D4B0B4908470D4B09490847C6 +:10B2F0000C4B084908470C4B064908470B4B0549BE +:10B3000008470B4B034908470A4B0249084700000E +:10B31000B125000051220000D52B0000772A000043 +:10B32000252A0000D7270000B912000017140000DA +:10B33000392B0000472300000A7802704B784370D5 +:10B340008A788270CA78C2700B79037170470A7864 +:10B3500002704B7843708A788270CA78C2700B7919 +:10B3600003714A79427170470A7802704B784370D2 +:10B370008A788270CA78C2700B7903714A794271F7 +:10B380008A798271CB79C37170470A8802804A88B2 +:10B3900042800A790271704730B47446641E257881 +:10B3A000641CAB4200D21D46635D5B00E31830BCF9 +:10B3B00018470000FFFFFFFF0000FFFF0100030030 +:10B3C000000001000000000000000000000000007C +:10B3D00000000000870000000000000000000000E6 +:10B3E0000000000000000001020304000D0E0F1019 +:10B3F000000000000F6900002D6B0000F56B0000DD +:10B400004F6C0000A36C00000B6D00006969000028 +:10B41000216A0000AD6D0000BB7900001001100131 +:10B420003A0200001A020000040104013C00170067 +:10B4300044000E00F401FA00960064004B00320054 +:10B440001E001400010204081020408055555525A7 +:10B450002627D6BE898E555555D6BE898E0000004A +:10B460007006120DB413000014035A06A009000060 +:10B470006004F208840D0000A8B401000800002058 +:10B480001000000004110000B8B4010018000020F2 +:10B490006C0100000AB10100D8B401008401002051 +:10B4A0006C20000020110000024801688907FCD5CB +:10B4B0007047000000E200E0013536010001005451 +:10B4C0003720FB349B5F80B4800010026801337F1B +:08B4D0000102A029E449B101C9 +:00000001FF
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_DELTA_DFCM_NNN40/TARGET_NORDIC/TARGET_MCU_NRF51822/PeripheralNames.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,58 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2013 Nordic Semiconductor
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define STDIO_UART_TX TX_PIN_NUMBER
+#define STDIO_UART_RX RX_PIN_NUMBER
+#define STDIO_UART UART_0
+
+typedef enum {
+ UART_0 = (int)NRF_UART0_BASE
+} UARTName;
+
+
+typedef enum {
+ SPI_0 = (int)NRF_SPI0_BASE,
+ SPI_1 = (int)NRF_SPI1_BASE,
+ SPIS = (int)NRF_SPIS1_BASE
+} SPIName;
+
+typedef enum {
+ PWM_1 = 0,
+ PWM_2
+} PWMName;
+
+typedef enum {
+ I2C_0 = (int)NRF_TWI0_BASE,
+ I2C_1 = (int)NRF_TWI1_BASE
+} I2CName;
+
+typedef enum {
+ ADC0_0 = (int)NRF_ADC_BASE
+} ADCName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_DELTA_DFCM_NNN40/TARGET_NORDIC/TARGET_MCU_NRF51822/PortNames.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,30 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2013 Nordic Semiconductor
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ Port0 = 0 //GPIO pins 0-31
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_DELTA_DFCM_NNN40/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_DELTA_DFCM_NNN40/PinNames.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,130 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015 Nordic Semiconductor
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT 3
+
+typedef enum {
+ NC = (int)0xFFFFFFFF,
+ p0 = 0,
+ p1 = 1,
+ p2 = 2,
+ p3 = 3,
+ p4 = 4,
+ p5 = 5,
+ p6 = 6,
+ p7 = 7,
+ p8 = NC,
+ p9 = NC,
+ p10 = NC,
+ p11 = NC,
+ p12 = NC,
+ p13 = 13,
+ p14 = NC,
+ p15 = NC,
+ p16 = 16,
+ p17 = 17,
+ p18 = NC,
+ p19 = 19,
+ p20 = 20,
+ p21 = 21,
+ p22 = 22,
+ p23 = 23,
+ p24 = 24,
+ p25 = 25,
+ p26 = 26,
+ p27 = 27,
+ p28 = NC,
+ p29 = 29,
+ p30 = 30,
+ p31 = 31,
+
+ LED1 = p7,
+ LED2 = p13,
+
+ BUTTON0 = p16,
+ BUTTON1 = p17,
+
+ RX_PIN_NUMBER = p23,
+ TX_PIN_NUMBER = p25,
+
+ // mBed interface Pins
+ USBTX = TX_PIN_NUMBER,
+ USBRX = RX_PIN_NUMBER,
+
+ SPI_PSELMOSI0 = p24,
+ SPI_PSELMISO0 = p29,
+ SPI_PSELSS0 = p6,
+ SPI_PSELSCK0 = p21,
+
+ SPIS_PSELMOSI = p24,
+ SPIS_PSELMISO = p29,
+ SPIS_PSELSS = p6,
+ SPIS_PSELSCK = p21,
+
+ I2C_SDA0 = p22,
+ I2C_SCL0 = p20,
+
+ A0 = p1,
+ A1 = p2,
+ A2 = p3,
+ A3 = p4,
+ A4 = p5,
+ A5 = p6,
+
+ SWIO = p19,
+ VERF0 = p0,
+
+ // SPI for controlling internal flash, don't use it.
+ FLASH_SPIMOSI = 15,
+ FLASH_SPIMISO = 9,
+ FLASH_SPICS = 28,
+ FLASH_SPICLK = 11,
+ // Not connected
+ CTS_PIN_NUMBER= NC,
+ RTS_PIN_NUMBER= NC,
+ SPI_PSELMOSI1 = NC,
+ SPI_PSELMISO1 = NC,
+ SPI_PSELSS1 = NC,
+ SPI_PSELSCK1 = NC,
+ LED3 = NC,
+ LED4 = NC
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullDown = 1,
+ PullUp = 3,
+ PullDefault = PullUp
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_DELTA_DFCM_NNN40/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_DELTA_DFCM_NNN40/device.h Tue Jun 09 14:29:26 2015 +0100 @@ -0,0 +1,57 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2015 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 0 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_CAN 0 + +#define DEVICE_RTC 1 + +#define DEVICE_ETHERNET 0 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 + +#define DEVICE_SLEEP 1 + +#define DEVICE_DEBUG_AWARENESS 1 + +#define DEVICE_STDIO_MESSAGES 0 + +#define DEVICE_ERROR_PATTERN 1 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_DELTA_DFCM_NNN40/TARGET_NORDIC/TARGET_MCU_NRF51822/gpio_object.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_GPIO_OBJECT_H
+#define MBED_GPIO_OBJECT_H
+
+#include "mbed_assert.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ uint32_t mask;
+
+ __IO uint32_t *reg_dir;
+ __IO uint32_t *reg_set;
+ __IO uint32_t *reg_clr;
+ __I uint32_t *reg_in;
+} gpio_t;
+
+static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ if (value)
+ *obj->reg_set = obj->mask;
+ else
+ *obj->reg_clr = obj->mask;
+}
+
+static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ return ((*obj->reg_in & obj->mask) ? 1 : 0);
+}
+
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_DELTA_DFCM_NNN40/TARGET_NORDIC/TARGET_MCU_NRF51822/objects.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,86 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2013 Nordic Semiconductor
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define I2C_SPI_PERIPHERAL_FOR_I2C 1
+#define I2C_SPI_PERIPHERAL_FOR_SPI 2
+
+typedef struct {
+ uint8_t usage; // I2C: 1, SPI: 2
+ uint8_t sda_mosi;
+ uint8_t scl_miso;
+ uint8_t sclk;
+} i2c_spi_peripheral_t;
+
+struct serial_s {
+ NRF_UART_Type *uart;
+ int index;
+};
+
+struct spi_s {
+ NRF_SPI_Type *spi;
+ NRF_SPIS_Type *spis;
+ uint8_t peripheral;
+};
+
+struct port_s {
+ __IO uint32_t *reg_cnf;
+ __IO uint32_t *reg_out;
+ __I uint32_t *reg_in;
+ PortName port;
+ uint32_t mask;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+};
+
+struct i2c_s {
+ NRF_TWI_Type *i2c;
+ PinName sda;
+ PinName scl;
+ int freq;
+ uint8_t address_set;
+ uint8_t peripheral;
+};
+
+struct analogin_s {
+ ADCName adc;
+ uint8_t adc_pin;
+};
+
+struct gpio_irq_s {
+ uint32_t ch;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
Binary file TARGET_DELTA_DFCM_NNN40/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_DELTA_DFCM_NNN40/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_DELTA_DFCM_NNN40/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_DELTA_DFCM_NNN40/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_DELTA_DFCM_NNN40/TOOLCHAIN_ARM_STD/nRF51822.sct Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,24 @@
+;WITHOUT SOFTDEVICE:
+;LR_IROM1 0x00000000 0x00040000 {
+; ER_IROM1 0x00000000 0x00040000 {
+; *.o (RESET, +First)
+; *(InRoot$$Sections)
+; .ANY (+RO)
+; }
+; RW_IRAM1 0x20000000 0x00004000 {
+; .ANY (+RW +ZI)
+; }
+;}
+;
+;WITH SOFTDEVICE:
+
+LR_IROM1 0x1C000 0x0024000 {
+ ER_IROM1 0x1C000 0x0024000 {
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+ RW_IRAM1 0x20002800 0x00001800 {
+ .ANY (+RW +ZI)
+ }
+}
Binary file TARGET_DELTA_DFCM_NNN40/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_DELTA_DFCM_NNN40/TOOLCHAIN_ARM_STD/startup_nRF51822.o has changed
Binary file TARGET_DELTA_DFCM_NNN40/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_DELTA_DFCM_NNN40/TOOLCHAIN_ARM_STD/system_nrf51.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_DELTA_DFCM_NNN40/TOOLCHAIN_GCC_ARM/NRF51822.ld Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,151 @@
+/* Linker script to configure memory regions. */
+
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x0001C000, LENGTH = 0x24000
+ RAM (rwx) : ORIGIN = 0x20002800, LENGTH = 0x1800
+}
+
+OUTPUT_FORMAT ("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.Vectors))
+ *(.text*)
+
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ *(.jcr)
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+
+ } > RAM
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start__ = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ } > RAM
+
+ .heap (COPY):
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy (COPY):
+ {
+ *(.stack*)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
Binary file TARGET_DELTA_DFCM_NNN40/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_DELTA_DFCM_NNN40/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_DELTA_DFCM_NNN40/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_DELTA_DFCM_NNN40/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
Binary file TARGET_DELTA_DFCM_NNN40/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_DELTA_DFCM_NNN40/TOOLCHAIN_GCC_ARM/startup_NRF51822.o has changed
Binary file TARGET_DELTA_DFCM_NNN40/TOOLCHAIN_GCC_ARM/system_nrf51.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_DELTA_DFCM_NNN40/cmsis.h Tue Jun 09 14:29:26 2015 +0100 @@ -0,0 +1,13 @@ +/* mbed Microcontroller Library - CMSIS + * Copyright (C) 2009-2011 ARM Limited. All rights reserved. + * + * A generic CMSIS include header, pulling in LPC407x_8x specifics + */ + +#ifndef MBED_CMSIS_H +#define MBED_CMSIS_H + +#include "nrf.h" +#include "cmsis_nvic.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_DELTA_DFCM_NNN40/cmsis_nvic.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,53 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2011 ARM Limited. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of ARM Limited nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+#define NVIC_NUM_VECTORS (16 + 32) // CORE + MCU Peripherals
+#define NVIC_USER_IRQ_OFFSET 16
+
+#include "nrf51.h"
+#include "cmsis.h"
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
+uint32_t NVIC_GetVector(IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_DELTA_DFCM_NNN40/compiler_abstraction.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,109 @@
+/* Copyright (c) 2013, Nordic Semiconductor ASA
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * * Neither the name of Nordic Semiconductor ASA nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#ifndef _COMPILER_ABSTRACTION_H
+#define _COMPILER_ABSTRACTION_H
+
+/*lint ++flb "Enter library region" */
+
+#if defined ( __CC_ARM )
+
+ #ifndef __ASM
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #endif
+
+ #ifndef __INLINE
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #endif
+
+ #ifndef __WEAK
+ #define __WEAK __weak /*!< weak keyword for ARM Compiler */
+ #endif
+
+ #define GET_SP() __current_sp() /*!> read current SP function for ARM Compiler */
+
+#elif defined ( __ICCARM__ )
+
+ #ifndef __ASM
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #endif
+
+ #ifndef __INLINE
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #endif
+
+ #ifndef __WEAK
+ #define __WEAK __weak /*!> define weak function for IAR Compiler */
+ #endif
+
+ #define GET_SP() __get_SP() /*!> read current SP function for IAR Compiler */
+
+#elif defined ( __GNUC__ )
+
+ #ifndef __ASM
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #endif
+
+ #ifndef __INLINE
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #endif
+
+ #ifndef __WEAK
+ #define __WEAK __attribute__((weak)) /*!< weak keyword for GNU Compiler */
+ #endif
+
+ #define GET_SP() gcc_current_sp() /*!> read current SP function for GNU Compiler */
+
+ static inline unsigned int gcc_current_sp(void)
+ {
+ register unsigned sp asm("sp");
+ return sp;
+ }
+
+#elif defined ( __TASKING__ )
+
+ #ifndef __ASM
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #endif
+
+ #ifndef __INLINE
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #endif
+
+ #ifndef __WEAK
+ #define __WEAK __attribute__((weak)) /*!< weak keyword for TASKING Compiler */
+ #endif
+
+ #define GET_SP() __get_MSP() /*!> read current SP function for TASKING Compiler */
+
+#endif
+
+/*lint --flb "Leave library region" */
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_DELTA_DFCM_NNN40/core_ca9.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,271 @@
+/**************************************************************************//**
+ * @file core_ca9.h
+ * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File
+ * @version
+ * @date 25 March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CA9_H_GENERIC
+#define __CORE_CA9_H_GENERIC
+
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_A9
+ @{
+ */
+
+/* CMSIS CA9 definitions */
+#define __CA9_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CA9_CMSIS_VERSION_SUB (0x10) /*!< [15:0] CMSIS HAL sub version */
+#define __CA9_CMSIS_VERSION ((__CA9_CMSIS_VERSION_MAIN << 16) | \
+ __CA9_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_A (0x09) /*!< Cortex-A Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /*!< standard types definitions */
+#include "core_caInstr.h" /*!< Core Instruction Access */
+#include "core_caFunc.h" /*!< Core Function Access */
+#include "core_cm4_simd.h" /*!< Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CA9_H_DEPENDANT
+#define __CORE_CA9_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CA9_REV
+ #define __CA9_REV 0x0000
+ #warning "__CA9_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 1
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 1
+ #endif
+
+ #if __Vendor_SysTickConfig == 0
+ #error "__Vendor_SysTickConfig set to 0, but vendor systick timer must be supplied for Cortex-A9"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_A9 */
+
+
+/*******************************************************************************
+ * Register Abstraction
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-A processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t reserved1:7; /*!< bit: 20..23 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/*@} end of group CMSIS_CORE */
+
+/*@} end of CMSIS_Core_FPUFunctions */
+
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_DELTA_DFCM_NNN40/core_caFunc.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,1161 @@
+/**************************************************************************//**
+ * @file core_caFunc.h
+ * @brief CMSIS Cortex-A Core Function Access Header File
+ * @version V3.10
+ * @date 9 May 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CAFUNC_H__
+#define __CORE_CAFUNC_H__
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get CPSR Register
+
+ This function returns the content of the CPSR Register.
+
+ \return CPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_CPSR(void)
+{
+ register uint32_t __regCPSR __ASM("cpsr");
+ return(__regCPSR);
+}
+
+/** \brief Set Stack Pointer
+
+ This function assigns the given value to the current stack pointer.
+
+ \param [in] topOfStack Stack Pointer value to set
+ */
+register uint32_t __regSP __ASM("sp");
+__STATIC_INLINE void __set_SP(uint32_t topOfStack)
+{
+ __regSP = topOfStack;
+}
+
+
+/** \brief Get link register
+
+ This function returns the value of the link register
+
+ \return Value of link register
+ */
+register uint32_t __reglr __ASM("lr");
+__STATIC_INLINE uint32_t __get_LR(void)
+{
+ return(__reglr);
+}
+
+/** \brief Set link register
+
+ This function sets the value of the link register
+
+ \param [in] lr LR value to set
+ */
+__STATIC_INLINE void __set_LR(uint32_t lr)
+{
+ __reglr = lr;
+}
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_PSP(uint32_t topOfProcStack)
+{
+ ARM
+ PRESERVE8
+
+ BIC R0, R0, #7 ;ensure stack is 8-byte aligned
+ MRS R1, CPSR
+ CPS #MODE_SYS ;no effect in USR mode
+ MOV SP, R0
+ MSR CPSR_c, R1 ;no effect in USR mode
+ ISB
+ BX LR
+
+}
+
+/** \brief Set User Mode
+
+ This function changes the processor state to User Mode
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_CPS_USR(void)
+{
+ ARM
+
+ CPS #MODE_USR
+ BX LR
+}
+
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+/** \brief Get FPEXC
+
+ This function returns the current value of the Floating Point Exception Control register.
+
+ \return Floating Point Exception Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPEXC(void)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ return(__regfpexc);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPEXC
+
+ This function assigns the given value to the Floating Point Exception Control register.
+
+ \param [in] fpscr Floating Point Exception Control value to set
+ */
+__STATIC_INLINE void __set_FPEXC(uint32_t fpexc)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ __regfpexc = (fpexc);
+#endif
+}
+
+/** \brief Get CPACR
+
+ This function returns the current value of the Coprocessor Access Control register.
+
+ \return Coprocessor Access Control register value
+ */
+__STATIC_INLINE uint32_t __get_CPACR(void)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ return __regCPACR;
+}
+
+/** \brief Set CPACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] cpacr Coporcessor Acccess Control value to set
+ */
+__STATIC_INLINE void __set_CPACR(uint32_t cpacr)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ __regCPACR = cpacr;
+ __ISB();
+}
+
+/** \brief Get CBAR
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Configuration Base Address register value
+ */
+__STATIC_INLINE uint32_t __get_CBAR() {
+ register uint32_t __regCBAR __ASM("cp15:4:c15:c0:0");
+ return(__regCBAR);
+}
+
+/** \brief Get TTBR0
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Translation Table Base Register 0 value
+ */
+__STATIC_INLINE uint32_t __get_TTBR0() {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ return(__regTTBR0);
+}
+
+/** \brief Set TTBR0
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] ttbr0 Translation Table Base Register 0 value to set
+ */
+__STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ __regTTBR0 = ttbr0;
+ __ISB();
+}
+
+/** \brief Get DACR
+
+ This function returns the value of the Domain Access Control Register.
+
+ \return Domain Access Control Register value
+ */
+__STATIC_INLINE uint32_t __get_DACR() {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ return(__regDACR);
+}
+
+/** \brief Set DACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] dacr Domain Access Control Register value to set
+ */
+__STATIC_INLINE void __set_DACR(uint32_t dacr) {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ __regDACR = dacr;
+ __ISB();
+}
+
+/******************************** Cache and BTAC enable ****************************************************/
+
+/** \brief Set SCTLR
+
+ This function assigns the given value to the System Control Register.
+
+ \param [in] sctlr System Control Register, value to set
+ */
+__STATIC_INLINE void __set_SCTLR(uint32_t sctlr)
+{
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ __regSCTLR = sctlr;
+}
+
+/** \brief Get SCTLR
+
+ This function returns the value of the System Control Register.
+
+ \return System Control Register value
+ */
+__STATIC_INLINE uint32_t __get_SCTLR() {
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ return(__regSCTLR);
+}
+
+/** \brief Enable Caches
+
+ Enable Caches
+ */
+__STATIC_INLINE void __enable_caches(void) {
+ // Set I bit 12 to enable I Cache
+ // Set C bit 2 to enable D Cache
+ __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief Disable Caches
+
+ Disable Caches
+ */
+__STATIC_INLINE void __disable_caches(void) {
+ // Clear I bit 12 to disable I Cache
+ // Clear C bit 2 to disable D Cache
+ __set_SCTLR( __get_SCTLR() & ~(1 << 12) & ~(1 << 2));
+ __ISB();
+}
+
+/** \brief Enable BTAC
+
+ Enable BTAC
+ */
+__STATIC_INLINE void __enable_btac(void) {
+ // Set Z bit 11 to enable branch prediction
+ __set_SCTLR( __get_SCTLR() | (1 << 11));
+ __ISB();
+}
+
+/** \brief Disable BTAC
+
+ Disable BTAC
+ */
+__STATIC_INLINE void __disable_btac(void) {
+ // Clear Z bit 11 to disable branch prediction
+ __set_SCTLR( __get_SCTLR() & ~(1 << 11));
+}
+
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __enable_mmu(void) {
+ // Set M bit 0 to enable the MMU
+ // Set AFE bit to enable simplified access permissions model
+ // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+ __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+ __ISB();
+}
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __disable_mmu(void) {
+ // Clear M bit 0 to disable the MMU
+ __set_SCTLR( __get_SCTLR() & ~1);
+ __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief Invalidate the whole tlb
+
+ TLBIALL. Invalidate the whole tlb
+ */
+
+__STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+ register uint32_t __TLBIALL __ASM("cp15:0:c8:c7:0");
+ __TLBIALL = 0;
+ __DSB();
+ __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief Invalidate entire branch predictor array
+
+ BPIALL. Branch Predictor Invalidate All.
+ */
+
+__STATIC_INLINE void __v7_inv_btac(void) {
+ register uint32_t __BPIALL __ASM("cp15:0:c7:c5:6");
+ __BPIALL = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief Invalidate the whole I$
+
+ ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+__STATIC_INLINE void __v7_inv_icache_all(void) {
+ register uint32_t __ICIALLU __ASM("cp15:0:c7:c5:0");
+ __ICIALLU = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new I cache state
+}
+
+/** \brief Clean D$ by MVA
+
+ DCCMVAC. Data cache clean by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_dcache_mva(void *va) {
+ register uint32_t __DCCMVAC __ASM("cp15:0:c7:c10:1");
+ __DCCMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Invalidate D$ by MVA
+
+ DCIMVAC. Data cache invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_inv_dcache_mva(void *va) {
+ register uint32_t __DCIMVAC __ASM("cp15:0:c7:c6:1");
+ __DCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Clean and Invalidate D$ by MVA
+
+ DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+ register uint32_t __DCCIMVAC __ASM("cp15:0:c7:c14:1");
+ __DCCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief
+ * Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency.
+ */
+#pragma push
+#pragma arm
+__STATIC_ASM void __v7_all_cache(uint32_t op) {
+ ARM
+
+ PUSH {R4-R11}
+
+ MRC p15, 1, R6, c0, c0, 1 // Read CLIDR
+ ANDS R3, R6, #0x07000000 // Extract coherency level
+ MOV R3, R3, LSR #23 // Total cache levels << 1
+ BEQ Finished // If 0, no need to clean
+
+ MOV R10, #0 // R10 holds current cache level << 1
+Loop1 ADD R2, R10, R10, LSR #1 // R2 holds cache "Set" position
+ MOV R1, R6, LSR R2 // Bottom 3 bits are the Cache-type for this level
+ AND R1, R1, #7 // Isolate those lower 3 bits
+ CMP R1, #2
+ BLT Skip // No cache or only instruction cache at this level
+
+ MCR p15, 2, R10, c0, c0, 0 // Write the Cache Size selection register
+ ISB // ISB to sync the change to the CacheSizeID reg
+ MRC p15, 1, R1, c0, c0, 0 // Reads current Cache Size ID register
+ AND R2, R1, #7 // Extract the line length field
+ ADD R2, R2, #4 // Add 4 for the line length offset (log2 16 bytes)
+ LDR R4, =0x3FF
+ ANDS R4, R4, R1, LSR #3 // R4 is the max number on the way size (right aligned)
+ CLZ R5, R4 // R5 is the bit position of the way size increment
+ LDR R7, =0x7FFF
+ ANDS R7, R7, R1, LSR #13 // R7 is the max number of the index size (right aligned)
+
+Loop2 MOV R9, R4 // R9 working copy of the max way size (right aligned)
+
+Loop3 ORR R11, R10, R9, LSL R5 // Factor in the Way number and cache number into R11
+ ORR R11, R11, R7, LSL R2 // Factor in the Set number
+ CMP R0, #0
+ BNE Dccsw
+ MCR p15, 0, R11, c7, c6, 2 // DCISW. Invalidate by Set/Way
+ B cont
+Dccsw CMP R0, #1
+ BNE Dccisw
+ MCR p15, 0, R11, c7, c10, 2 // DCCSW. Clean by Set/Way
+ B cont
+Dccisw MCR p15, 0, R11, c7, c14, 2 // DCCISW, Clean and Invalidate by Set/Way
+cont SUBS R9, R9, #1 // Decrement the Way number
+ BGE Loop3
+ SUBS R7, R7, #1 // Decrement the Set number
+ BGE Loop2
+Skip ADD R10, R10, #2 // increment the cache number
+ CMP R3, R10
+ BGT Loop1
+
+Finished
+ DSB
+ POP {R4-R11}
+ BX lr
+
+}
+#pragma pop
+
+/** \brief __v7_all_cache - helper function
+
+ */
+
+/** \brief Invalidate the whole D$
+
+ DCISW. Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_inv_dcache_all(void) {
+ __v7_all_cache(0);
+}
+
+/** \brief Clean the whole D$
+
+ DCCSW. Clean by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_dcache_all(void) {
+ __v7_all_cache(1);
+}
+
+/** \brief Clean and invalidate the whole D$
+
+ DCCISW. Clean and Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_inv_dcache_all(void) {
+ __v7_all_cache(2);
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__ICCARM__)) /*---------------- ICC Compiler ---------------------*/
+
+#error IAR Compiler support not implemented for Cortex-A
+
+#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
+
+/* GNU gcc specific functions */
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i");
+}
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __disable_irq(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("mrs %0, cpsr" : "=r" (result));
+ __ASM volatile ("cpsid i");
+ return(result & 0x80);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+#if 1
+ uint32_t result;
+
+ __ASM volatile ("mrs %0, apsr" : "=r" (result) );
+ return (result);
+#else
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+#endif
+}
+
+
+/** \brief Get CPSR Register
+
+ This function returns the content of the CPSR Register.
+
+ \return CPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CPSR(void)
+{
+#if 1
+ register uint32_t __regCPSR;
+ __ASM volatile ("mrs %0, cpsr" : "=r" (__regCPSR));
+#else
+ register uint32_t __regCPSR __ASM("cpsr");
+#endif
+ return(__regCPSR);
+}
+
+#if 0
+/** \brief Set Stack Pointer
+
+ This function assigns the given value to the current stack pointer.
+
+ \param [in] topOfStack Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_SP(uint32_t topOfStack)
+{
+ register uint32_t __regSP __ASM("sp");
+ __regSP = topOfStack;
+}
+#endif
+
+/** \brief Get link register
+
+ This function returns the value of the link register
+
+ \return Value of link register
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_LR(void)
+{
+ register uint32_t __reglr __ASM("lr");
+ return(__reglr);
+}
+
+#if 0
+/** \brief Set link register
+
+ This function sets the value of the link register
+
+ \param [in] lr LR value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_LR(uint32_t lr)
+{
+ register uint32_t __reglr __ASM("lr");
+ __reglr = lr;
+}
+#endif
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+extern void __set_PSP(uint32_t topOfProcStack);
+
+/** \brief Set User Mode
+
+ This function changes the processor state to User Mode
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+extern void __set_CPS_USR(void);
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+#if 1
+ uint32_t result;
+
+ __ASM volatile ("vmrs %0, fpscr" : "=r" (result) );
+ return (result);
+#else
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#endif
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+#if 1
+ __ASM volatile ("vmsr fpscr, %0" : : "r" (fpscr) );
+#else
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+#endif
+}
+
+/** \brief Get FPEXC
+
+ This function returns the current value of the Floating Point Exception Control register.
+
+ \return Floating Point Exception Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPEXC(void)
+{
+#if (__FPU_PRESENT == 1)
+#if 1
+ uint32_t result;
+
+ __ASM volatile ("vmrs %0, fpexc" : "=r" (result));
+ return (result);
+#else
+ register uint32_t __regfpexc __ASM("fpexc");
+ return(__regfpexc);
+#endif
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPEXC
+
+ This function assigns the given value to the Floating Point Exception Control register.
+
+ \param [in] fpscr Floating Point Exception Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPEXC(uint32_t fpexc)
+{
+#if (__FPU_PRESENT == 1)
+#if 1
+ __ASM volatile ("vmsr fpexc, %0" : : "r" (fpexc));
+#else
+ register uint32_t __regfpexc __ASM("fpexc");
+ __regfpexc = (fpexc);
+#endif
+#endif
+}
+
+/** \brief Get CPACR
+
+ This function returns the current value of the Coprocessor Access Control register.
+
+ \return Coprocessor Access Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CPACR(void)
+{
+#if 1
+ register uint32_t __regCPACR;
+ __ASM volatile ("mrc p15, 0, %0, c1, c0, 2" : "=r" (__regCPACR));
+#else
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+#endif
+ return __regCPACR;
+}
+
+/** \brief Set CPACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] cpacr Coporcessor Acccess Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CPACR(uint32_t cpacr)
+{
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c1, c0, 2" : : "r" (cpacr));
+#else
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ __regCPACR = cpacr;
+#endif
+ __ISB();
+}
+
+/** \brief Get CBAR
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Configuration Base Address register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CBAR() {
+#if 1
+ register uint32_t __regCBAR;
+ __ASM volatile ("mrc p15, 4, %0, c15, c0, 0" : "=r" (__regCBAR));
+#else
+ register uint32_t __regCBAR __ASM("cp15:4:c15:c0:0");
+#endif
+ return(__regCBAR);
+}
+
+/** \brief Get TTBR0
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Translation Table Base Register 0 value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_TTBR0() {
+#if 1
+ register uint32_t __regTTBR0;
+ __ASM volatile ("mrc p15, 0, %0, c2, c0, 0" : "=r" (__regTTBR0));
+#else
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+#endif
+ return(__regTTBR0);
+}
+
+/** \brief Set TTBR0
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] ttbr0 Translation Table Base Register 0 value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c2, c0, 0" : : "r" (ttbr0));
+#else
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ __regTTBR0 = ttbr0;
+#endif
+ __ISB();
+}
+
+/** \brief Get DACR
+
+ This function returns the value of the Domain Access Control Register.
+
+ \return Domain Access Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_DACR() {
+#if 1
+ register uint32_t __regDACR;
+ __ASM volatile ("mrc p15, 0, %0, c3, c0, 0" : "=r" (__regDACR));
+#else
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+#endif
+ return(__regDACR);
+}
+
+/** \brief Set DACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] dacr Domain Access Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_DACR(uint32_t dacr) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c3, c0, 0" : : "r" (dacr));
+#else
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ __regDACR = dacr;
+#endif
+ __ISB();
+}
+
+/******************************** Cache and BTAC enable ****************************************************/
+
+/** \brief Set SCTLR
+
+ This function assigns the given value to the System Control Register.
+
+ \param [in] sctlr System Control Register, value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_SCTLR(uint32_t sctlr)
+{
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c1, c0, 0" : : "r" (sctlr));
+#else
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ __regSCTLR = sctlr;
+#endif
+}
+
+/** \brief Get SCTLR
+
+ This function returns the value of the System Control Register.
+
+ \return System Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_SCTLR() {
+#if 1
+ register uint32_t __regSCTLR;
+ __ASM volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (__regSCTLR));
+#else
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+#endif
+ return(__regSCTLR);
+}
+
+/** \brief Enable Caches
+
+ Enable Caches
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_caches(void) {
+ // Set I bit 12 to enable I Cache
+ // Set C bit 2 to enable D Cache
+ __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief Disable Caches
+
+ Disable Caches
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_caches(void) {
+ // Clear I bit 12 to disable I Cache
+ // Clear C bit 2 to disable D Cache
+ __set_SCTLR( __get_SCTLR() & ~(1 << 12) & ~(1 << 2));
+ __ISB();
+}
+
+/** \brief Enable BTAC
+
+ Enable BTAC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_btac(void) {
+ // Set Z bit 11 to enable branch prediction
+ __set_SCTLR( __get_SCTLR() | (1 << 11));
+ __ISB();
+}
+
+/** \brief Disable BTAC
+
+ Disable BTAC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_btac(void) {
+ // Clear Z bit 11 to disable branch prediction
+ __set_SCTLR( __get_SCTLR() & ~(1 << 11));
+}
+
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_mmu(void) {
+ // Set M bit 0 to enable the MMU
+ // Set AFE bit to enable simplified access permissions model
+ // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+ __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+ __ISB();
+}
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_mmu(void) {
+ // Clear M bit 0 to disable the MMU
+ __set_SCTLR( __get_SCTLR() & ~1);
+ __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief Invalidate the whole tlb
+
+ TLBIALL. Invalidate the whole tlb
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c8, c7, 0" : : "r" (0));
+#else
+ register uint32_t __TLBIALL __ASM("cp15:0:c8:c7:0");
+ __TLBIALL = 0;
+#endif
+ __DSB();
+ __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief Invalidate entire branch predictor array
+
+ BPIALL. Branch Predictor Invalidate All.
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_btac(void) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c5, 6" : : "r" (0));
+#else
+ register uint32_t __BPIALL __ASM("cp15:0:c7:c5:6");
+ __BPIALL = 0;
+#endif
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief Invalidate the whole I$
+
+ ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_icache_all(void) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c5, 0" : : "r" (0));
+#else
+ register uint32_t __ICIALLU __ASM("cp15:0:c7:c5:0");
+ __ICIALLU = 0;
+#endif
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new I cache state
+}
+
+/** \brief Clean D$ by MVA
+
+ DCCMVAC. Data cache clean by MVA to PoC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_dcache_mva(void *va) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c10, 1" : : "r" ((uint32_t)va));
+#else
+ register uint32_t __DCCMVAC __ASM("cp15:0:c7:c10:1");
+ __DCCMVAC = (uint32_t)va;
+#endif
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Invalidate D$ by MVA
+
+ DCIMVAC. Data cache invalidate by MVA to PoC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_dcache_mva(void *va) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c6, 1" : : "r" ((uint32_t)va));
+#else
+ register uint32_t __DCIMVAC __ASM("cp15:0:c7:c6:1");
+ __DCIMVAC = (uint32_t)va;
+#endif
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Clean and Invalidate D$ by MVA
+
+ DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c14, 1" : : "r" ((uint32_t)va));
+#else
+ register uint32_t __DCCIMVAC __ASM("cp15:0:c7:c14:1");
+ __DCCIMVAC = (uint32_t)va;
+#endif
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief
+ * Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency.
+ */
+
+/** \brief __v7_all_cache - helper function
+
+ */
+
+extern void __v7_all_cache(uint32_t op);
+
+
+/** \brief Invalidate the whole D$
+
+ DCISW. Invalidate by Set/Way
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_dcache_all(void) {
+ __v7_all_cache(0);
+}
+
+/** \brief Clean the whole D$
+
+ DCCSW. Clean by Set/Way
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_dcache_all(void) {
+ __v7_all_cache(1);
+}
+
+/** \brief Clean and invalidate the whole D$
+
+ DCCISW. Clean and Invalidate by Set/Way
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_inv_dcache_all(void) {
+ __v7_all_cache(2);
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__TASKING__)) /*--------------- TASKING Compiler -----------------*/
+
+#error TASKING Compiler support not implemented for Cortex-A
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CAFUNC_H__ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_DELTA_DFCM_NNN40/core_caInstr.h Tue Jun 09 14:29:26 2015 +0100 @@ -0,0 +1,45 @@ +/**************************************************************************//** + * @file core_caInstr.h + * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File + * @version + * @date 04. December 2012 + * + * @note + * + ******************************************************************************/ +/* Copyright (c) 2009 - 2012 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + +#ifndef __CORE_CAINSTR_H__ +#define __CORE_CAINSTR_H__ + +#define __CORTEX_M 0x3 +#include "core_cmInstr.h" +#undef __CORTEX_M + +#endif +
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_DELTA_DFCM_NNN40/core_ca_mmu.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,848 @@
+;/**************************************************************************//**
+; * @file core_ca_mmu.h
+; * @brief MMU Startup File for
+; * VE_A9_MP Device Series
+; * @version V1.01
+; * @date 25 March 2013
+; *
+; * @note
+; *
+; ******************************************************************************/
+;/* Copyright (c) 2012 ARM LIMITED
+;
+; All rights reserved.
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+; - Redistributions of source code must retain the above copyright
+; notice, this list of conditions and the following disclaimer.
+; - Redistributions in binary form must reproduce the above copyright
+; notice, this list of conditions and the following disclaimer in the
+; documentation and/or other materials provided with the distribution.
+; - Neither the name of ARM nor the names of its contributors may be used
+; to endorse or promote products derived from this software without
+; specific prior written permission.
+; *
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+; ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+; LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+; CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+; SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+; INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+; CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+; ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+; POSSIBILITY OF SUCH DAMAGE.
+; ---------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef _MMU_FUNC_H
+#define _MMU_FUNC_H
+
+#define SECTION_DESCRIPTOR (0x2)
+#define SECTION_MASK (0xFFFFFFFC)
+
+#define SECTION_TEXCB_MASK (0xFFFF8FF3)
+#define SECTION_B_SHIFT (2)
+#define SECTION_C_SHIFT (3)
+#define SECTION_TEX0_SHIFT (12)
+#define SECTION_TEX1_SHIFT (13)
+#define SECTION_TEX2_SHIFT (14)
+
+#define SECTION_XN_MASK (0xFFFFFFEF)
+#define SECTION_XN_SHIFT (4)
+
+#define SECTION_DOMAIN_MASK (0xFFFFFE1F)
+#define SECTION_DOMAIN_SHIFT (5)
+
+#define SECTION_P_MASK (0xFFFFFDFF)
+#define SECTION_P_SHIFT (9)
+
+#define SECTION_AP_MASK (0xFFFF73FF)
+#define SECTION_AP_SHIFT (10)
+#define SECTION_AP2_SHIFT (15)
+
+#define SECTION_S_MASK (0xFFFEFFFF)
+#define SECTION_S_SHIFT (16)
+
+#define SECTION_NG_MASK (0xFFFDFFFF)
+#define SECTION_NG_SHIFT (17)
+
+#define SECTION_NS_MASK (0xFFF7FFFF)
+#define SECTION_NS_SHIFT (19)
+
+
+#define PAGE_L1_DESCRIPTOR (0x1)
+#define PAGE_L1_MASK (0xFFFFFFFC)
+
+#define PAGE_L2_4K_DESC (0x2)
+#define PAGE_L2_4K_MASK (0xFFFFFFFD)
+
+#define PAGE_L2_64K_DESC (0x1)
+#define PAGE_L2_64K_MASK (0xFFFFFFFC)
+
+#define PAGE_4K_TEXCB_MASK (0xFFFFFE33)
+#define PAGE_4K_B_SHIFT (2)
+#define PAGE_4K_C_SHIFT (3)
+#define PAGE_4K_TEX0_SHIFT (6)
+#define PAGE_4K_TEX1_SHIFT (7)
+#define PAGE_4K_TEX2_SHIFT (8)
+
+#define PAGE_64K_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_64K_B_SHIFT (2)
+#define PAGE_64K_C_SHIFT (3)
+#define PAGE_64K_TEX0_SHIFT (12)
+#define PAGE_64K_TEX1_SHIFT (13)
+#define PAGE_64K_TEX2_SHIFT (14)
+
+#define PAGE_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_B_SHIFT (2)
+#define PAGE_C_SHIFT (3)
+#define PAGE_TEX_SHIFT (12)
+
+#define PAGE_XN_4K_MASK (0xFFFFFFFE)
+#define PAGE_XN_4K_SHIFT (0)
+#define PAGE_XN_64K_MASK (0xFFFF7FFF)
+#define PAGE_XN_64K_SHIFT (15)
+
+
+#define PAGE_DOMAIN_MASK (0xFFFFFE1F)
+#define PAGE_DOMAIN_SHIFT (5)
+
+#define PAGE_P_MASK (0xFFFFFDFF)
+#define PAGE_P_SHIFT (9)
+
+#define PAGE_AP_MASK (0xFFFFFDCF)
+#define PAGE_AP_SHIFT (4)
+#define PAGE_AP2_SHIFT (9)
+
+#define PAGE_S_MASK (0xFFFFFBFF)
+#define PAGE_S_SHIFT (10)
+
+#define PAGE_NG_MASK (0xFFFFF7FF)
+#define PAGE_NG_SHIFT (11)
+
+#define PAGE_NS_MASK (0xFFFFFFF7)
+#define PAGE_NS_SHIFT (3)
+
+#define OFFSET_1M (0x00100000)
+#define OFFSET_64K (0x00010000)
+#define OFFSET_4K (0x00001000)
+
+#define DESCRIPTOR_FAULT (0x00000000)
+
+/* ########################### MMU Function Access ########################### */
+/** \ingroup MMU_FunctionInterface
+ \defgroup MMU_Functions MMU Functions Interface
+ @{
+ */
+
+/* Attributes enumerations */
+
+/* Region size attributes */
+typedef enum
+{
+ SECTION,
+ PAGE_4k,
+ PAGE_64k,
+} mmu_region_size_Type;
+
+/* Region type attributes */
+typedef enum
+{
+ NORMAL,
+ DEVICE,
+ SHARED_DEVICE,
+ NON_SHARED_DEVICE,
+ STRONGLY_ORDERED
+} mmu_memory_Type;
+
+/* Region cacheability attributes */
+typedef enum
+{
+ NON_CACHEABLE,
+ WB_WA,
+ WT,
+ WB_NO_WA,
+} mmu_cacheability_Type;
+
+/* Region parity check attributes */
+typedef enum
+{
+ ECC_DISABLED,
+ ECC_ENABLED,
+} mmu_ecc_check_Type;
+
+/* Region execution attributes */
+typedef enum
+{
+ EXECUTE,
+ NON_EXECUTE,
+} mmu_execute_Type;
+
+/* Region global attributes */
+typedef enum
+{
+ GLOBAL,
+ NON_GLOBAL,
+} mmu_global_Type;
+
+/* Region shareability attributes */
+typedef enum
+{
+ NON_SHARED,
+ SHARED,
+} mmu_shared_Type;
+
+/* Region security attributes */
+typedef enum
+{
+ SECURE,
+ NON_SECURE,
+} mmu_secure_Type;
+
+/* Region access attributes */
+typedef enum
+{
+ NO_ACCESS,
+ RW,
+ READ,
+} mmu_access_Type;
+
+/* Memory Region definition */
+typedef struct RegionStruct {
+ mmu_region_size_Type rg_t;
+ mmu_memory_Type mem_t;
+ uint8_t domain;
+ mmu_cacheability_Type inner_norm_t;
+ mmu_cacheability_Type outer_norm_t;
+ mmu_ecc_check_Type e_t;
+ mmu_execute_Type xn_t;
+ mmu_global_Type g_t;
+ mmu_secure_Type sec_t;
+ mmu_access_Type priv_t;
+ mmu_access_Type user_t;
+ mmu_shared_Type sh_t;
+
+} mmu_region_attributes_Type;
+
+/** \brief Set section execution-never attribute
+
+ The function sets section execution-never attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] xn Section execution-never attribute : EXECUTE , NON_EXECUTE.
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_section(uint32_t *descriptor_l1, mmu_execute_Type xn)
+{
+ *descriptor_l1 &= SECTION_XN_MASK;
+ *descriptor_l1 |= ((xn & 0x1) << SECTION_XN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section domain
+
+ The function sets section domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Section domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_section(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= SECTION_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xF) << SECTION_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section parity check
+
+ The function sets section parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_section(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set section access privileges
+
+ The function sets section access privileges
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_section(uint32_t *descriptor_l1, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x6; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l1 &= SECTION_AP_MASK;
+ *descriptor_l1 |= (ap & 0x3) << SECTION_AP_SHIFT;
+ *descriptor_l1 |= ((ap & 0x4)>>2) << SECTION_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set section shareability
+
+ The function sets section shareability
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_section(uint32_t *descriptor_l1, mmu_shared_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_S_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Global attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] g_bit Section attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_section(uint32_t *descriptor_l1, mmu_global_Type g_bit)
+{
+ *descriptor_l1 &= SECTION_NG_MASK;
+ *descriptor_l1 |= ((g_bit & 0x1) << SECTION_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Security attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_section(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_NS_SHIFT);
+ return 0;
+}
+
+/* Page 4k or 64k */
+/** \brief Set 4k/64k page execution-never attribute
+
+ The function sets 4k/64k page execution-never attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] xn Page execution-never attribute : EXECUTE , NON_EXECUTE.
+ \param [in] page Page size: PAGE_4k, PAGE_64k,
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_page(uint32_t *descriptor_l2, mmu_execute_Type xn, mmu_region_size_Type page)
+{
+ if (page == PAGE_4k)
+ {
+ *descriptor_l2 &= PAGE_XN_4K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_4K_SHIFT);
+ }
+ else
+ {
+ *descriptor_l2 &= PAGE_XN_64K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_64K_SHIFT);
+ }
+ return 0;
+}
+
+/** \brief Set 4k/64k page domain
+
+ The function sets 4k/64k page domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Page domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_page(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= PAGE_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xf) << PAGE_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page parity check
+
+ The function sets 4k/64k page parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_page(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page access privileges
+
+ The function sets 4k/64k page access privileges
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_page(uint32_t *descriptor_l2, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x6; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l2 &= PAGE_AP_MASK;
+ *descriptor_l2 |= (ap & 0x3) << PAGE_AP_SHIFT;
+ *descriptor_l2 |= ((ap & 0x4)>>2) << PAGE_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page shareability
+
+ The function sets 4k/64k page shareability
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] s_bit 4k/64k page shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_page(uint32_t *descriptor_l2, mmu_shared_Type s_bit)
+{
+ *descriptor_l2 &= PAGE_S_MASK;
+ *descriptor_l2 |= ((s_bit & 0x1) << PAGE_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Global attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] g_bit 4k/64k page attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_page(uint32_t *descriptor_l2, mmu_global_Type g_bit)
+{
+ *descriptor_l2 &= PAGE_NG_MASK;
+ *descriptor_l2 |= ((g_bit & 0x1) << PAGE_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Security attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit 4k/64k page Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_page(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= PAGE_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << PAGE_NS_SHIFT);
+ return 0;
+}
+
+
+/** \brief Set Section memory attributes
+
+ The function sets section memory attributes
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] mem Section memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_section(uint32_t *descriptor_l1, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner)
+{
+ *descriptor_l1 &= SECTION_TEXCB_MASK;
+
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l1 |= 1 << SECTION_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT) | (1 << SECTION_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT) | (1 << SECTION_TEX0_SHIFT);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page memory attributes
+
+ The function sets 4k/64k page memory attributes
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] mem 4k/64k page memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_page(uint32_t *descriptor_l2, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner, mmu_region_size_Type page)
+{
+ *descriptor_l2 &= PAGE_4K_TEXCB_MASK;
+
+ if (page == PAGE_64k)
+ {
+ //same as section
+ __memory_section(descriptor_l2, mem, outer, inner);
+ }
+ else
+ {
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l2 |= 1 << PAGE_4K_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT) | (1 << PAGE_4K_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT) | (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Create a L1 section descriptor
+
+ The function creates a section descriptor.
+
+ Assumptions:
+ - 16MB super sections not suported
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg Section attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_section_descriptor(uint32_t *descriptor, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+
+ __memory_section(descriptor, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t);
+ __xn_section(descriptor,reg.xn_t);
+ __domain_section(descriptor, reg.domain);
+ __p_section(descriptor, reg.e_t);
+ __ap_section(descriptor, reg.priv_t, reg.user_t, 1);
+ __shared_section(descriptor,reg.sh_t);
+ __global_section(descriptor,reg.g_t);
+ __secure_section(descriptor,reg.sec_t);
+ *descriptor &= SECTION_MASK;
+ *descriptor |= SECTION_DESCRIPTOR;
+
+ return 0;
+
+}
+
+
+/** \brief Create a L1 and L2 4k/64k page descriptor
+
+ The function creates a 4k/64k page descriptor.
+ Assumptions:
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg 4k/64k page attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_page_descriptor(uint32_t *descriptor, uint32_t *descriptor2, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+ *descriptor2 = 0;
+
+ switch (reg.rg_t)
+ {
+ case PAGE_4k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_4k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_4k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_4K_MASK;
+ *descriptor2 |= PAGE_L2_4K_DESC;
+ break;
+
+ case PAGE_64k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_64k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_64k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_64K_MASK;
+ *descriptor2 |= PAGE_L2_64K_DESC;
+ break;
+
+ case SECTION:
+ //error
+ break;
+
+ }
+
+ return 0;
+
+}
+
+/** \brief Create a 1MB Section
+
+ \param [in] ttb Translation table base address
+ \param [in] base_address Section base address
+ \param [in] count Number of sections to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTSection(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1)
+{
+ uint32_t offset;
+ uint32_t entry;
+ uint32_t i;
+
+ offset = base_address >> 20;
+ entry = (base_address & 0xFFF00000) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb = ttb + offset;
+
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb++ = entry;
+ entry += OFFSET_1M;
+ }
+}
+
+/** \brief Create a 4k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 4k base address
+ \param [in] count Number of 4k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_4k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFFF000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_4K;
+ }
+}
+
+/** \brief Create a 64k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 64k base address
+ \param [in] count Number of 64k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_64k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i,j;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFF0000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //create 16 entries
+ for (j = 0; j < 16; j++)
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_64K;
+ }
+}
+
+/*@} end of MMU_Functions */
+#endif
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_DELTA_DFCM_NNN40/core_cm0.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,682 @@
+/**************************************************************************//**
+ * @file core_cm0.h
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M0
+ @{
+ */
+
+/* CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_DELTA_DFCM_NNN40/core_cm0plus.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,793 @@
+/**************************************************************************//**
+ * @file core_cm0plus.h
+ * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0PLUS_H_GENERIC
+#define __CORE_CM0PLUS_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex-M0+
+ @{
+ */
+
+/* CMSIS CM0P definitions */
+#define __CM0PLUS_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0PLUS_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16) | \
+ __CM0PLUS_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0PLUS_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0PLUS_H_DEPENDANT
+#define __CORE_CM0PLUS_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0PLUS_REV
+ #define __CM0PLUS_REV 0x0000
+ #warning "__CM0PLUS_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __VTOR_PRESENT
+ #define __VTOR_PRESENT 0
+ #warning "__VTOR_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex-M0+ */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+#if (__VTOR_PRESENT == 1)
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+#else
+ uint32_t RESERVED0;
+#endif
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if (__VTOR_PRESENT == 1)
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 8 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 8 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0+ Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0PLUS_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_DELTA_DFCM_NNN40/core_cm3.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,1627 @@
+/**************************************************************************//**
+ * @file core_cm3.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM3_H_GENERIC
+#define __CORE_CM3_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M3
+ @{
+ */
+
+/* CMSIS CM3 definitions */
+#define __CM3_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | \
+ __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x03) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI__VFP_SUPPORT____
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM3_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM3_H_DEPENDANT
+#define __CORE_CM3_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM3_REV
+ #define __CM3_REV 0x0200
+ #warning "__CM3_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M3 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#if (__CM3_REV < 0x0201) /* core r2p1 */
+#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#else
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+#else
+ uint32_t RESERVED1[1];
+#endif
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM3_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_DELTA_DFCM_NNN40/core_cm4.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,1772 @@
+/**************************************************************************//**
+ * @file core_cm4.h
+ * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_H_GENERIC
+#define __CORE_CM4_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M4
+ @{
+ */
+
+/* CMSIS CM4 definitions */
+#define __CM4_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM4_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16) | \
+ __CM4_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x04) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+#include <core_cm4_simd.h> /* Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CM4_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM4_H_DEPENDANT
+#define __CORE_CM4_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM4_REV
+ #define __CM4_REV 0x0000
+ #warning "__CM4_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 0
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M4 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ - Core FPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISOOFP_Pos 9 /*!< ACTLR: DISOOFP Position */
+#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */
+
+#define SCnSCB_ACTLR_DISFPCA_Pos 8 /*!< ACTLR: DISFPCA Position */
+#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_FPU Floating Point Unit (FPU)
+ \brief Type definitions for the Floating Point Unit (FPU)
+ @{
+ */
+
+/** \brief Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __IO uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
+ __IO uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
+ __IO uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
+ __I uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
+ __I uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register */
+#define FPU_FPCCR_ASPEN_Pos 31 /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos 30 /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos 8 /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos 6 /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos 5 /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos 4 /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos 3 /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos 1 /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos 0 /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk (1UL << FPU_FPCCR_LSPACT_Pos) /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register */
+#define FPU_FPCAR_ADDRESS_Pos 3 /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register */
+#define FPU_FPDSCR_AHP_Pos 26 /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos 25 /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos 24 /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos 22 /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 */
+#define FPU_MVFR0_FP_rounding_modes_Pos 28 /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos 24 /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos 20 /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos 16 /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos 12 /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos 8 /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos 4 /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos 0 /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL << FPU_MVFR0_A_SIMD_registers_Pos) /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 */
+#define FPU_MVFR1_FP_fused_MAC_Pos 28 /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos 24 /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos 4 /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos 0 /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk (0xFUL << FPU_MVFR1_FtZ_mode_Pos) /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+#if (__FPU_PRESENT == 1)
+ #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
+ #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+/* NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); enable interrupt */
+ NVIC->ISER[(uint32_t)((int32_t)IRQn) >> 5] = (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM4_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_DELTA_DFCM_NNN40/core_cm4_simd.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,673 @@
+/**************************************************************************//**
+ * @file core_cm4_simd.h
+ * @brief CMSIS Cortex-M4 SIMD Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_SIMD_H
+#define __CORE_CM4_SIMD_H
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ ******************************************************************************/
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#define __SADD8 __sadd8
+#define __QADD8 __qadd8
+#define __SHADD8 __shadd8
+#define __UADD8 __uadd8
+#define __UQADD8 __uqadd8
+#define __UHADD8 __uhadd8
+#define __SSUB8 __ssub8
+#define __QSUB8 __qsub8
+#define __SHSUB8 __shsub8
+#define __USUB8 __usub8
+#define __UQSUB8 __uqsub8
+#define __UHSUB8 __uhsub8
+#define __SADD16 __sadd16
+#define __QADD16 __qadd16
+#define __SHADD16 __shadd16
+#define __UADD16 __uadd16
+#define __UQADD16 __uqadd16
+#define __UHADD16 __uhadd16
+#define __SSUB16 __ssub16
+#define __QSUB16 __qsub16
+#define __SHSUB16 __shsub16
+#define __USUB16 __usub16
+#define __UQSUB16 __uqsub16
+#define __UHSUB16 __uhsub16
+#define __SASX __sasx
+#define __QASX __qasx
+#define __SHASX __shasx
+#define __UASX __uasx
+#define __UQASX __uqasx
+#define __UHASX __uhasx
+#define __SSAX __ssax
+#define __QSAX __qsax
+#define __SHSAX __shsax
+#define __USAX __usax
+#define __UQSAX __uqsax
+#define __UHSAX __uhsax
+#define __USAD8 __usad8
+#define __USADA8 __usada8
+#define __SSAT16 __ssat16
+#define __USAT16 __usat16
+#define __UXTB16 __uxtb16
+#define __UXTAB16 __uxtab16
+#define __SXTB16 __sxtb16
+#define __SXTAB16 __sxtab16
+#define __SMUAD __smuad
+#define __SMUADX __smuadx
+#define __SMLAD __smlad
+#define __SMLADX __smladx
+#define __SMLALD __smlald
+#define __SMLALDX __smlaldx
+#define __SMUSD __smusd
+#define __SMUSDX __smusdx
+#define __SMLSD __smlsd
+#define __SMLSDX __smlsdx
+#define __SMLSLD __smlsld
+#define __SMLSLDX __smlsldx
+#define __SEL __sel
+#define __QADD __qadd
+#define __QSUB __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
+ ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
+
+#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
+ ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
+
+#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+ ((int64_t)(ARG3) << 32) ) >> 32))
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_iar.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_ccs.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLALD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLALDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLSLD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLSLDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ if (ARG3 == 0) \
+ __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
+ else \
+ __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+/* not yet supported */
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CORE_CM4_SIMD_H */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_DELTA_DFCM_NNN40/core_cmFunc.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,636 @@
+/**************************************************************************//**
+ * @file core_cmFunc.h
+ * @brief CMSIS Cortex-M Core Function Access Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ register uint32_t __regIPSR __ASM("ipsr");
+ return(__regIPSR);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ register uint32_t __regXPSR __ASM("xpsr");
+ return(__regXPSR);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ return(__regProcessStackPointer);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ __regProcessStackPointer = topOfProcStack;
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ return(__regMainStackPointer);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ __regMainStackPointer = topOfMainStack;
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0xff);
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/** \brief Enable IRQ Interrupts
+
+ This function enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ uint32_t result;
+
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all instrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CMFUNC_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_DELTA_DFCM_NNN40/core_cmInstr.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,688 @@
+/**************************************************************************//**
+ * @file core_cmInstr.h
+ * @brief CMSIS Cortex-M Core Instruction Access Header File
+ * @version V3.20
+ * @date 05. March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __nop
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+#define __WFI __wfi
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __wfe
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __sev
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+#define __ISB() __isb(0xF)
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() __dsb(0xF)
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() __dmb(0xF)
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __rev
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+ rev16 r0, r0
+ bx lr
+}
+#endif
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+ revsh r0, r0
+ bx lr
+}
+#endif
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+#define __ROR __ror
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __breakpoint(value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __RBIT __rbit
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXB(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXH(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXW(value, ptr) __strex(value, ptr)
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+#define __CLREX __clrex
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT __ssat
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __usat
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __clz
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constrant "l"
+ * Otherwise, use general registers, specified by constrant "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __NOP(void)
+{
+ __ASM volatile ("nop");
+}
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFI(void)
+{
+ __ASM volatile ("wfi");
+}
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFE(void)
+{
+ __ASM volatile ("wfe");
+}
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __SEV(void)
+{
+ __ASM volatile ("sev");
+}
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ISB(void)
+{
+ __ASM volatile ("isb");
+}
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DSB(void)
+{
+ __ASM volatile ("dsb");
+}
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void)
+{
+ __ASM volatile ("dmb");
+}
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+ return __builtin_bswap32(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ return (short)__builtin_bswap16(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32 - op2));
+}
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void)
+{
+ __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_DELTA_DFCM_NNN40/nrf.h Tue Jun 09 14:29:26 2015 +0100 @@ -0,0 +1,48 @@ +/* Copyright (c) 2013, Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * * Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#ifndef NRF_H +#define NRF_H + +#ifndef _WIN32 + +/* Family selection for main includes. NRF51 must be selected. */ +#ifdef NRF51 + #include "nrf51.h" + #include "nrf51_bitfields.h" +#else + #error "Device family must be defined. See nrf.h." +#endif /* NRF51 */ + +#include "compiler_abstraction.h" + +#endif /* _WIN32 */ + +#endif /* NRF_H */ +
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_DELTA_DFCM_NNN40/nrf51.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,1312 @@
+
+/****************************************************************************************************//**
+ * @file nRF51.h
+ *
+ * @brief CMSIS Cortex-M0 Peripheral Access Layer Header File for
+ * nRF51 from Nordic Semiconductor.
+ *
+ * @version V522
+ * @date 31. October 2014
+ *
+ * @note Generated with SVDConv V2.81d
+ * from CMSIS SVD File 'nRF51.xml' Version 522,
+ *
+ * @par Copyright (c) 2013, Nordic Semiconductor ASA
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * * Neither the name of Nordic Semiconductor ASA nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ *******************************************************************************************************/
+
+
+
+/** @addtogroup Nordic Semiconductor
+ * @{
+ */
+
+/** @addtogroup nRF51
+ * @{
+ */
+
+#ifndef NRF51_H
+#define NRF51_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/* ------------------------- Interrupt Number Definition ------------------------ */
+
+typedef enum {
+/* ------------------- Cortex-M0 Processor Exceptions Numbers ------------------- */
+ Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset */
+ NonMaskableInt_IRQn = -14, /*!< 2 Non maskable Interrupt, cannot be stopped or preempted */
+ HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */
+ SVCall_IRQn = -5, /*!< 11 System Service Call via SVC instruction */
+ DebugMonitor_IRQn = -4, /*!< 12 Debug Monitor */
+ PendSV_IRQn = -2, /*!< 14 Pendable request for system service */
+ SysTick_IRQn = -1, /*!< 15 System Tick Timer */
+/* ---------------------- nRF51 Specific Interrupt Numbers ---------------------- */
+ POWER_CLOCK_IRQn = 0, /*!< 0 POWER_CLOCK */
+ RADIO_IRQn = 1, /*!< 1 RADIO */
+ UART0_IRQn = 2, /*!< 2 UART0 */
+ SPI0_TWI0_IRQn = 3, /*!< 3 SPI0_TWI0 */
+ SPI1_TWI1_IRQn = 4, /*!< 4 SPI1_TWI1 */
+ GPIOTE_IRQn = 6, /*!< 6 GPIOTE */
+ ADC_IRQn = 7, /*!< 7 ADC */
+ TIMER0_IRQn = 8, /*!< 8 TIMER0 */
+ TIMER1_IRQn = 9, /*!< 9 TIMER1 */
+ TIMER2_IRQn = 10, /*!< 10 TIMER2 */
+ RTC0_IRQn = 11, /*!< 11 RTC0 */
+ TEMP_IRQn = 12, /*!< 12 TEMP */
+ RNG_IRQn = 13, /*!< 13 RNG */
+ ECB_IRQn = 14, /*!< 14 ECB */
+ CCM_AAR_IRQn = 15, /*!< 15 CCM_AAR */
+ WDT_IRQn = 16, /*!< 16 WDT */
+ RTC1_IRQn = 17, /*!< 17 RTC1 */
+ QDEC_IRQn = 18, /*!< 18 QDEC */
+ LPCOMP_IRQn = 19, /*!< 19 LPCOMP */
+ SWI0_IRQn = 20, /*!< 20 SWI0 */
+ SWI1_IRQn = 21, /*!< 21 SWI1 */
+ SWI2_IRQn = 22, /*!< 22 SWI2 */
+ SWI3_IRQn = 23, /*!< 23 SWI3 */
+ SWI4_IRQn = 24, /*!< 24 SWI4 */
+ SWI5_IRQn = 25 /*!< 25 SWI5 */
+} IRQn_Type;
+
+
+/** @addtogroup Configuration_of_CMSIS
+ * @{
+ */
+
+
+/* ================================================================================ */
+/* ================ Processor and Core Peripheral Section ================ */
+/* ================================================================================ */
+
+/* ----------------Configuration of the Cortex-M0 Processor and Core Peripherals---------------- */
+#define __CM0_REV 0x0301 /*!< Cortex-M0 Core Revision */
+#define __MPU_PRESENT 0 /*!< MPU present or not */
+#define __NVIC_PRIO_BITS 2 /*!< Number of Bits used for Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+/** @} */ /* End of group Configuration_of_CMSIS */
+
+#include "core_cm0.h" /*!< Cortex-M0 processor and core peripherals */
+#include "system_nrf51.h" /*!< nRF51 System */
+
+/* ================================================================================ */
+/* ================ Device Specific Peripheral Section ================ */
+/* ================================================================================ */
+
+
+/** @addtogroup Device_Peripheral_Registers
+ * @{
+ */
+
+
+/* ------------------- Start of section using anonymous unions ------------------ */
+#if defined(__CC_ARM)
+ #pragma push
+ #pragma anon_unions
+#elif defined(__ICCARM__)
+ #pragma language=extended
+#elif defined(__GNUC__)
+ /* anonymous unions are enabled by default */
+#elif defined(__TMS470__)
+/* anonymous unions are enabled by default */
+#elif defined(__TASKING__)
+ #pragma warning 586
+#else
+ #warning Not supported compiler type
+#endif
+
+
+typedef struct {
+ __IO uint32_t CPU0; /*!< Configurable priority configuration register for CPU0. */
+ __IO uint32_t SPIS1; /*!< Configurable priority configuration register for SPIS1. */
+ __IO uint32_t RADIO; /*!< Configurable priority configuration register for RADIO. */
+ __IO uint32_t ECB; /*!< Configurable priority configuration register for ECB. */
+ __IO uint32_t CCM; /*!< Configurable priority configuration register for CCM. */
+ __IO uint32_t AAR; /*!< Configurable priority configuration register for AAR. */
+} AMLI_RAMPRI_Type;
+
+typedef struct {
+ __IO uint32_t SCK; /*!< Pin select for SCK. */
+ __IO uint32_t MOSI; /*!< Pin select for MOSI. */
+ __IO uint32_t MISO; /*!< Pin select for MISO. */
+} SPIM_PSEL_Type;
+
+typedef struct {
+ __IO uint32_t PTR; /*!< Data pointer. */
+ __IO uint32_t MAXCNT; /*!< Maximum number of buffer bytes to receive. */
+ __I uint32_t AMOUNT; /*!< Number of bytes received in the last transaction. */
+} SPIM_RXD_Type;
+
+typedef struct {
+ __IO uint32_t PTR; /*!< Data pointer. */
+ __IO uint32_t MAXCNT; /*!< Maximum number of buffer bytes to send. */
+ __I uint32_t AMOUNT; /*!< Number of bytes sent in the last transaction. */
+} SPIM_TXD_Type;
+
+typedef struct {
+ __O uint32_t EN; /*!< Enable channel group. */
+ __O uint32_t DIS; /*!< Disable channel group. */
+} PPI_TASKS_CHG_Type;
+
+typedef struct {
+ __IO uint32_t EEP; /*!< Channel event end-point. */
+ __IO uint32_t TEP; /*!< Channel task end-point. */
+} PPI_CH_Type;
+
+typedef struct {
+ __I uint32_t PART; /*!< Part code */
+ __I uint32_t VARIANT; /*!< Part variant */
+ __I uint32_t PACKAGE; /*!< Package option */
+ __I uint32_t RAM; /*!< RAM variant */
+ __I uint32_t FLASH; /*!< Flash variant */
+ __I uint32_t RESERVED[3]; /*!< Reserved */
+} FICR_INFO_Type;
+
+
+/* ================================================================================ */
+/* ================ POWER ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Power Control. (POWER)
+ */
+
+typedef struct { /*!< POWER Structure */
+ __I uint32_t RESERVED0[30];
+ __O uint32_t TASKS_CONSTLAT; /*!< Enable constant latency mode. */
+ __O uint32_t TASKS_LOWPWR; /*!< Enable low power mode (variable latency). */
+ __I uint32_t RESERVED1[34];
+ __IO uint32_t EVENTS_POFWARN; /*!< Power failure warning. */
+ __I uint32_t RESERVED2[126];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[61];
+ __IO uint32_t RESETREAS; /*!< Reset reason. */
+ __I uint32_t RESERVED4[9];
+ __I uint32_t RAMSTATUS; /*!< Ram status register. */
+ __I uint32_t RESERVED5[53];
+ __O uint32_t SYSTEMOFF; /*!< System off register. */
+ __I uint32_t RESERVED6[3];
+ __IO uint32_t POFCON; /*!< Power failure configuration. */
+ __I uint32_t RESERVED7[2];
+ __IO uint32_t GPREGRET; /*!< General purpose retention register. This register is a retained
+ register. */
+ __I uint32_t RESERVED8;
+ __IO uint32_t RAMON; /*!< Ram on/off. */
+ __I uint32_t RESERVED9[7];
+ __IO uint32_t RESET; /*!< Pin reset functionality configuration register. This register
+ is a retained register. */
+ __I uint32_t RESERVED10[3];
+ __IO uint32_t RAMONB; /*!< Ram on/off. */
+ __I uint32_t RESERVED11[8];
+ __IO uint32_t DCDCEN; /*!< DCDC converter enable configuration register. */
+ __I uint32_t RESERVED12[291];
+ __IO uint32_t DCDCFORCE; /*!< DCDC power-up force register. */
+} NRF_POWER_Type;
+
+
+/* ================================================================================ */
+/* ================ CLOCK ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Clock control. (CLOCK)
+ */
+
+typedef struct { /*!< CLOCK Structure */
+ __O uint32_t TASKS_HFCLKSTART; /*!< Start HFCLK clock source. */
+ __O uint32_t TASKS_HFCLKSTOP; /*!< Stop HFCLK clock source. */
+ __O uint32_t TASKS_LFCLKSTART; /*!< Start LFCLK clock source. */
+ __O uint32_t TASKS_LFCLKSTOP; /*!< Stop LFCLK clock source. */
+ __O uint32_t TASKS_CAL; /*!< Start calibration of LFCLK RC oscillator. */
+ __O uint32_t TASKS_CTSTART; /*!< Start calibration timer. */
+ __O uint32_t TASKS_CTSTOP; /*!< Stop calibration timer. */
+ __I uint32_t RESERVED0[57];
+ __IO uint32_t EVENTS_HFCLKSTARTED; /*!< HFCLK oscillator started. */
+ __IO uint32_t EVENTS_LFCLKSTARTED; /*!< LFCLK oscillator started. */
+ __I uint32_t RESERVED1;
+ __IO uint32_t EVENTS_DONE; /*!< Calibration of LFCLK RC oscillator completed. */
+ __IO uint32_t EVENTS_CTTO; /*!< Calibration timer timeout. */
+ __I uint32_t RESERVED2[124];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[63];
+ __I uint32_t HFCLKRUN; /*!< Task HFCLKSTART trigger status. */
+ __I uint32_t HFCLKSTAT; /*!< High frequency clock status. */
+ __I uint32_t RESERVED4;
+ __I uint32_t LFCLKRUN; /*!< Task LFCLKSTART triggered status. */
+ __I uint32_t LFCLKSTAT; /*!< Low frequency clock status. */
+ __I uint32_t LFCLKSRCCOPY; /*!< Clock source for the LFCLK clock, set when task LKCLKSTART is
+ triggered. */
+ __I uint32_t RESERVED5[62];
+ __IO uint32_t LFCLKSRC; /*!< Clock source for the LFCLK clock. */
+ __I uint32_t RESERVED6[7];
+ __IO uint32_t CTIV; /*!< Calibration timer interval. */
+ __I uint32_t RESERVED7[5];
+ __IO uint32_t XTALFREQ; /*!< Crystal frequency. */
+} NRF_CLOCK_Type;
+
+
+/* ================================================================================ */
+/* ================ MPU ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Memory Protection Unit. (MPU)
+ */
+
+typedef struct { /*!< MPU Structure */
+ __I uint32_t RESERVED0[330];
+ __IO uint32_t PERR0; /*!< Configuration of peripherals in mpu regions. */
+ __IO uint32_t RLENR0; /*!< Length of RAM region 0. */
+ __I uint32_t RESERVED1[52];
+ __IO uint32_t PROTENSET0; /*!< Erase and write protection bit enable set register. */
+ __IO uint32_t PROTENSET1; /*!< Erase and write protection bit enable set register. */
+ __IO uint32_t DISABLEINDEBUG; /*!< Disable erase and write protection mechanism in debug mode. */
+ __IO uint32_t PROTBLOCKSIZE; /*!< Erase and write protection block size. */
+} NRF_MPU_Type;
+
+
+/* ================================================================================ */
+/* ================ PU ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Patch unit. (PU)
+ */
+
+typedef struct { /*!< PU Structure */
+ __I uint32_t RESERVED0[448];
+ __IO uint32_t REPLACEADDR[8]; /*!< Address of first instruction to replace. */
+ __I uint32_t RESERVED1[24];
+ __IO uint32_t PATCHADDR[8]; /*!< Relative address of patch instructions. */
+ __I uint32_t RESERVED2[24];
+ __IO uint32_t PATCHEN; /*!< Patch enable register. */
+ __IO uint32_t PATCHENSET; /*!< Patch enable register. */
+ __IO uint32_t PATCHENCLR; /*!< Patch disable register. */
+} NRF_PU_Type;
+
+
+/* ================================================================================ */
+/* ================ AMLI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief AHB Multi-Layer Interface. (AMLI)
+ */
+
+typedef struct { /*!< AMLI Structure */
+ __I uint32_t RESERVED0[896];
+ AMLI_RAMPRI_Type RAMPRI; /*!< RAM configurable priority configuration structure. */
+} NRF_AMLI_Type;
+
+
+/* ================================================================================ */
+/* ================ RADIO ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief The radio. (RADIO)
+ */
+
+typedef struct { /*!< RADIO Structure */
+ __O uint32_t TASKS_TXEN; /*!< Enable radio in TX mode. */
+ __O uint32_t TASKS_RXEN; /*!< Enable radio in RX mode. */
+ __O uint32_t TASKS_START; /*!< Start radio. */
+ __O uint32_t TASKS_STOP; /*!< Stop radio. */
+ __O uint32_t TASKS_DISABLE; /*!< Disable radio. */
+ __O uint32_t TASKS_RSSISTART; /*!< Start the RSSI and take one sample of the receive signal strength. */
+ __O uint32_t TASKS_RSSISTOP; /*!< Stop the RSSI measurement. */
+ __O uint32_t TASKS_BCSTART; /*!< Start the bit counter. */
+ __O uint32_t TASKS_BCSTOP; /*!< Stop the bit counter. */
+ __I uint32_t RESERVED0[55];
+ __IO uint32_t EVENTS_READY; /*!< Ready event. */
+ __IO uint32_t EVENTS_ADDRESS; /*!< Address event. */
+ __IO uint32_t EVENTS_PAYLOAD; /*!< Payload event. */
+ __IO uint32_t EVENTS_END; /*!< End event. */
+ __IO uint32_t EVENTS_DISABLED; /*!< Disable event. */
+ __IO uint32_t EVENTS_DEVMATCH; /*!< A device address match occurred on the last received packet. */
+ __IO uint32_t EVENTS_DEVMISS; /*!< No device address match occurred on the last received packet. */
+ __IO uint32_t EVENTS_RSSIEND; /*!< Sampling of the receive signal strength complete. A new RSSI
+ sample is ready for readout at the RSSISAMPLE register. */
+ __I uint32_t RESERVED1[2];
+ __IO uint32_t EVENTS_BCMATCH; /*!< Bit counter reached bit count value specified in BC register. */
+ __I uint32_t RESERVED2[53];
+ __IO uint32_t SHORTS; /*!< Shortcuts for the radio. */
+ __I uint32_t RESERVED3[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED4[61];
+ __I uint32_t CRCSTATUS; /*!< CRC status of received packet. */
+ __I uint32_t CD; /*!< Carrier detect. */
+ __I uint32_t RXMATCH; /*!< Received address. */
+ __I uint32_t RXCRC; /*!< Received CRC. */
+ __I uint32_t DAI; /*!< Device address match index. */
+ __I uint32_t RESERVED5[60];
+ __IO uint32_t PACKETPTR; /*!< Packet pointer. Decision point: START task. */
+ __IO uint32_t FREQUENCY; /*!< Frequency. */
+ __IO uint32_t TXPOWER; /*!< Output power. */
+ __IO uint32_t MODE; /*!< Data rate and modulation. */
+ __IO uint32_t PCNF0; /*!< Packet configuration 0. */
+ __IO uint32_t PCNF1; /*!< Packet configuration 1. */
+ __IO uint32_t BASE0; /*!< Radio base address 0. Decision point: START task. */
+ __IO uint32_t BASE1; /*!< Radio base address 1. Decision point: START task. */
+ __IO uint32_t PREFIX0; /*!< Prefixes bytes for logical addresses 0 to 3. */
+ __IO uint32_t PREFIX1; /*!< Prefixes bytes for logical addresses 4 to 7. */
+ __IO uint32_t TXADDRESS; /*!< Transmit address select. */
+ __IO uint32_t RXADDRESSES; /*!< Receive address select. */
+ __IO uint32_t CRCCNF; /*!< CRC configuration. */
+ __IO uint32_t CRCPOLY; /*!< CRC polynomial. */
+ __IO uint32_t CRCINIT; /*!< CRC initial value. */
+ __IO uint32_t TEST; /*!< Test features enable register. */
+ __IO uint32_t TIFS; /*!< Inter Frame Spacing in microseconds. */
+ __I uint32_t RSSISAMPLE; /*!< RSSI sample. */
+ __I uint32_t RESERVED6;
+ __I uint32_t STATE; /*!< Current radio state. */
+ __IO uint32_t DATAWHITEIV; /*!< Data whitening initial value. */
+ __I uint32_t RESERVED7[2];
+ __IO uint32_t BCC; /*!< Bit counter compare. */
+ __I uint32_t RESERVED8[39];
+ __IO uint32_t DAB[8]; /*!< Device address base segment. */
+ __IO uint32_t DAP[8]; /*!< Device address prefix. */
+ __IO uint32_t DACNF; /*!< Device address match configuration. */
+ __I uint32_t RESERVED9[56];
+ __IO uint32_t OVERRIDE0; /*!< Trim value override register 0. */
+ __IO uint32_t OVERRIDE1; /*!< Trim value override register 1. */
+ __IO uint32_t OVERRIDE2; /*!< Trim value override register 2. */
+ __IO uint32_t OVERRIDE3; /*!< Trim value override register 3. */
+ __IO uint32_t OVERRIDE4; /*!< Trim value override register 4. */
+ __I uint32_t RESERVED10[561];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_RADIO_Type;
+
+
+/* ================================================================================ */
+/* ================ UART ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Universal Asynchronous Receiver/Transmitter. (UART)
+ */
+
+typedef struct { /*!< UART Structure */
+ __O uint32_t TASKS_STARTRX; /*!< Start UART receiver. */
+ __O uint32_t TASKS_STOPRX; /*!< Stop UART receiver. */
+ __O uint32_t TASKS_STARTTX; /*!< Start UART transmitter. */
+ __O uint32_t TASKS_STOPTX; /*!< Stop UART transmitter. */
+ __I uint32_t RESERVED0[3];
+ __O uint32_t TASKS_SUSPEND; /*!< Suspend UART. */
+ __I uint32_t RESERVED1[56];
+ __IO uint32_t EVENTS_CTS; /*!< CTS activated. */
+ __IO uint32_t EVENTS_NCTS; /*!< CTS deactivated. */
+ __IO uint32_t EVENTS_RXDRDY; /*!< Data received in RXD. */
+ __I uint32_t RESERVED2[4];
+ __IO uint32_t EVENTS_TXDRDY; /*!< Data sent from TXD. */
+ __I uint32_t RESERVED3;
+ __IO uint32_t EVENTS_ERROR; /*!< Error detected. */
+ __I uint32_t RESERVED4[7];
+ __IO uint32_t EVENTS_RXTO; /*!< Receiver timeout. */
+ __I uint32_t RESERVED5[46];
+ __IO uint32_t SHORTS; /*!< Shortcuts for UART. */
+ __I uint32_t RESERVED6[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED7[93];
+ __IO uint32_t ERRORSRC; /*!< Error source. Write error field to 1 to clear error. */
+ __I uint32_t RESERVED8[31];
+ __IO uint32_t ENABLE; /*!< Enable UART and acquire IOs. */
+ __I uint32_t RESERVED9;
+ __IO uint32_t PSELRTS; /*!< Pin select for RTS. */
+ __IO uint32_t PSELTXD; /*!< Pin select for TXD. */
+ __IO uint32_t PSELCTS; /*!< Pin select for CTS. */
+ __IO uint32_t PSELRXD; /*!< Pin select for RXD. */
+ __I uint32_t RXD; /*!< RXD register. On read action the buffer pointer is displaced.
+ Once read the character is consumed. If read when no character
+ available, the UART will stop working. */
+ __O uint32_t TXD; /*!< TXD register. */
+ __I uint32_t RESERVED10;
+ __IO uint32_t BAUDRATE; /*!< UART Baudrate. */
+ __I uint32_t RESERVED11[17];
+ __IO uint32_t CONFIG; /*!< Configuration of parity and hardware flow control register. */
+ __I uint32_t RESERVED12[675];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_UART_Type;
+
+
+/* ================================================================================ */
+/* ================ SPI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief SPI master 0. (SPI)
+ */
+
+typedef struct { /*!< SPI Structure */
+ __I uint32_t RESERVED0[66];
+ __IO uint32_t EVENTS_READY; /*!< TXD byte sent and RXD byte received. */
+ __I uint32_t RESERVED1[126];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED2[125];
+ __IO uint32_t ENABLE; /*!< Enable SPI. */
+ __I uint32_t RESERVED3;
+ __IO uint32_t PSELSCK; /*!< Pin select for SCK. */
+ __IO uint32_t PSELMOSI; /*!< Pin select for MOSI. */
+ __IO uint32_t PSELMISO; /*!< Pin select for MISO. */
+ __I uint32_t RESERVED4;
+ __I uint32_t RXD; /*!< RX data. */
+ __IO uint32_t TXD; /*!< TX data. */
+ __I uint32_t RESERVED5;
+ __IO uint32_t FREQUENCY; /*!< SPI frequency */
+ __I uint32_t RESERVED6[11];
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+ __I uint32_t RESERVED7[681];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_SPI_Type;
+
+
+/* ================================================================================ */
+/* ================ TWI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Two-wire interface master 0. (TWI)
+ */
+
+typedef struct { /*!< TWI Structure */
+ __O uint32_t TASKS_STARTRX; /*!< Start 2-Wire master receive sequence. */
+ __I uint32_t RESERVED0;
+ __O uint32_t TASKS_STARTTX; /*!< Start 2-Wire master transmit sequence. */
+ __I uint32_t RESERVED1[2];
+ __O uint32_t TASKS_STOP; /*!< Stop 2-Wire transaction. */
+ __I uint32_t RESERVED2;
+ __O uint32_t TASKS_SUSPEND; /*!< Suspend 2-Wire transaction. */
+ __O uint32_t TASKS_RESUME; /*!< Resume 2-Wire transaction. */
+ __I uint32_t RESERVED3[56];
+ __IO uint32_t EVENTS_STOPPED; /*!< Two-wire stopped. */
+ __IO uint32_t EVENTS_RXDREADY; /*!< Two-wire ready to deliver new RXD byte received. */
+ __I uint32_t RESERVED4[4];
+ __IO uint32_t EVENTS_TXDSENT; /*!< Two-wire finished sending last TXD byte. */
+ __I uint32_t RESERVED5;
+ __IO uint32_t EVENTS_ERROR; /*!< Two-wire error detected. */
+ __I uint32_t RESERVED6[4];
+ __IO uint32_t EVENTS_BB; /*!< Two-wire byte boundary. */
+ __I uint32_t RESERVED7[3];
+ __IO uint32_t EVENTS_SUSPENDED; /*!< Two-wire suspended. */
+ __I uint32_t RESERVED8[45];
+ __IO uint32_t SHORTS; /*!< Shortcuts for TWI. */
+ __I uint32_t RESERVED9[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED10[110];
+ __IO uint32_t ERRORSRC; /*!< Two-wire error source. Write error field to 1 to clear error. */
+ __I uint32_t RESERVED11[14];
+ __IO uint32_t ENABLE; /*!< Enable two-wire master. */
+ __I uint32_t RESERVED12;
+ __IO uint32_t PSELSCL; /*!< Pin select for SCL. */
+ __IO uint32_t PSELSDA; /*!< Pin select for SDA. */
+ __I uint32_t RESERVED13[2];
+ __I uint32_t RXD; /*!< RX data register. */
+ __IO uint32_t TXD; /*!< TX data register. */
+ __I uint32_t RESERVED14;
+ __IO uint32_t FREQUENCY; /*!< Two-wire frequency. */
+ __I uint32_t RESERVED15[24];
+ __IO uint32_t ADDRESS; /*!< Address used in the two-wire transfer. */
+ __I uint32_t RESERVED16[668];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_TWI_Type;
+
+
+/* ================================================================================ */
+/* ================ SPIS ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief SPI slave 1. (SPIS)
+ */
+
+typedef struct { /*!< SPIS Structure */
+ __I uint32_t RESERVED0[9];
+ __O uint32_t TASKS_ACQUIRE; /*!< Acquire SPI semaphore. */
+ __O uint32_t TASKS_RELEASE; /*!< Release SPI semaphore. */
+ __I uint32_t RESERVED1[54];
+ __IO uint32_t EVENTS_END; /*!< Granted transaction completed. */
+ __I uint32_t RESERVED2[8];
+ __IO uint32_t EVENTS_ACQUIRED; /*!< Semaphore acquired. */
+ __I uint32_t RESERVED3[53];
+ __IO uint32_t SHORTS; /*!< Shortcuts for SPIS. */
+ __I uint32_t RESERVED4[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED5[61];
+ __I uint32_t SEMSTAT; /*!< Semaphore status. */
+ __I uint32_t RESERVED6[15];
+ __IO uint32_t STATUS; /*!< Status from last transaction. */
+ __I uint32_t RESERVED7[47];
+ __IO uint32_t ENABLE; /*!< Enable SPIS. */
+ __I uint32_t RESERVED8;
+ __IO uint32_t PSELSCK; /*!< Pin select for SCK. */
+ __IO uint32_t PSELMISO; /*!< Pin select for MISO. */
+ __IO uint32_t PSELMOSI; /*!< Pin select for MOSI. */
+ __IO uint32_t PSELCSN; /*!< Pin select for CSN. */
+ __I uint32_t RESERVED9[7];
+ __IO uint32_t RXDPTR; /*!< RX data pointer. */
+ __IO uint32_t MAXRX; /*!< Maximum number of bytes in the receive buffer. */
+ __I uint32_t AMOUNTRX; /*!< Number of bytes received in last granted transaction. */
+ __I uint32_t RESERVED10;
+ __IO uint32_t TXDPTR; /*!< TX data pointer. */
+ __IO uint32_t MAXTX; /*!< Maximum number of bytes in the transmit buffer. */
+ __I uint32_t AMOUNTTX; /*!< Number of bytes transmitted in last granted transaction. */
+ __I uint32_t RESERVED11;
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+ __I uint32_t RESERVED12;
+ __IO uint32_t DEF; /*!< Default character. */
+ __I uint32_t RESERVED13[24];
+ __IO uint32_t ORC; /*!< Over-read character. */
+ __I uint32_t RESERVED14[654];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_SPIS_Type;
+
+
+/* ================================================================================ */
+/* ================ SPIM ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief SPI master with easyDMA 1. (SPIM)
+ */
+
+typedef struct { /*!< SPIM Structure */
+ __I uint32_t RESERVED0[4];
+ __O uint32_t TASKS_START; /*!< Start SPI transaction. */
+ __O uint32_t TASKS_STOP; /*!< Stop SPI transaction. */
+ __I uint32_t RESERVED1;
+ __O uint32_t TASKS_SUSPEND; /*!< Suspend SPI transaction. */
+ __O uint32_t TASKS_RESUME; /*!< Resume SPI transaction. */
+ __I uint32_t RESERVED2[56];
+ __IO uint32_t EVENTS_STOPPED; /*!< SPI transaction has stopped. */
+ __I uint32_t RESERVED3[2];
+ __IO uint32_t EVENTS_ENDRX; /*!< End of RXD buffer reached. */
+ __I uint32_t RESERVED4;
+ __IO uint32_t EVENTS_END; /*!< End of RXD buffer and TXD buffer reached. */
+ __I uint32_t RESERVED5;
+ __IO uint32_t EVENTS_ENDTX; /*!< End of TXD buffer reached. */
+ __I uint32_t RESERVED6[10];
+ __IO uint32_t EVENTS_STARTED; /*!< Transaction started. */
+ __I uint32_t RESERVED7[44];
+ __IO uint32_t SHORTS; /*!< Shortcuts for SPIM. */
+ __I uint32_t RESERVED8[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED9[125];
+ __IO uint32_t ENABLE; /*!< Enable SPIM. */
+ __I uint32_t RESERVED10;
+ SPIM_PSEL_Type PSEL; /*!< Pin select configuration. */
+ __I uint32_t RESERVED11;
+ __I uint32_t RXDDATA; /*!< RXD register. */
+ __IO uint32_t TXDDATA; /*!< TXD register. */
+ __I uint32_t RESERVED12;
+ __IO uint32_t FREQUENCY; /*!< SPI frequency. */
+ __I uint32_t RESERVED13[3];
+ SPIM_RXD_Type RXD; /*!< RXD EasyDMA configuration and status. */
+ __I uint32_t RESERVED14;
+ SPIM_TXD_Type TXD; /*!< TXD EasyDMA configuration and status. */
+ __I uint32_t RESERVED15;
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+ __I uint32_t RESERVED16[26];
+ __IO uint32_t ORC; /*!< Over-read character. */
+ __I uint32_t RESERVED17[654];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_SPIM_Type;
+
+
+/* ================================================================================ */
+/* ================ GPIOTE ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief GPIO tasks and events. (GPIOTE)
+ */
+
+typedef struct { /*!< GPIOTE Structure */
+ __O uint32_t TASKS_OUT[4]; /*!< Tasks asssociated with GPIOTE channels. */
+ __I uint32_t RESERVED0[60];
+ __IO uint32_t EVENTS_IN[4]; /*!< Tasks asssociated with GPIOTE channels. */
+ __I uint32_t RESERVED1[27];
+ __IO uint32_t EVENTS_PORT; /*!< Event generated from multiple pins. */
+ __I uint32_t RESERVED2[97];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[129];
+ __IO uint32_t CONFIG[4]; /*!< Channel configuration registers. */
+ __I uint32_t RESERVED4[695];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_GPIOTE_Type;
+
+
+/* ================================================================================ */
+/* ================ ADC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Analog to digital converter. (ADC)
+ */
+
+typedef struct { /*!< ADC Structure */
+ __O uint32_t TASKS_START; /*!< Start an ADC conversion. */
+ __O uint32_t TASKS_STOP; /*!< Stop ADC. */
+ __I uint32_t RESERVED0[62];
+ __IO uint32_t EVENTS_END; /*!< ADC conversion complete. */
+ __I uint32_t RESERVED1[128];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED2[61];
+ __I uint32_t BUSY; /*!< ADC busy register. */
+ __I uint32_t RESERVED3[63];
+ __IO uint32_t ENABLE; /*!< ADC enable. */
+ __IO uint32_t CONFIG; /*!< ADC configuration register. */
+ __I uint32_t RESULT; /*!< Result of ADC conversion. */
+ __I uint32_t RESERVED4[700];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_ADC_Type;
+
+
+/* ================================================================================ */
+/* ================ TIMER ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Timer 0. (TIMER)
+ */
+
+typedef struct { /*!< TIMER Structure */
+ __O uint32_t TASKS_START; /*!< Start Timer. */
+ __O uint32_t TASKS_STOP; /*!< Stop Timer. */
+ __O uint32_t TASKS_COUNT; /*!< Increment Timer (In counter mode). */
+ __O uint32_t TASKS_CLEAR; /*!< Clear timer. */
+ __O uint32_t TASKS_SHUTDOWN; /*!< Shutdown timer. */
+ __I uint32_t RESERVED0[11];
+ __O uint32_t TASKS_CAPTURE[4]; /*!< Capture Timer value to CC[n] registers. */
+ __I uint32_t RESERVED1[60];
+ __IO uint32_t EVENTS_COMPARE[4]; /*!< Compare event on CC[n] match. */
+ __I uint32_t RESERVED2[44];
+ __IO uint32_t SHORTS; /*!< Shortcuts for Timer. */
+ __I uint32_t RESERVED3[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED4[126];
+ __IO uint32_t MODE; /*!< Timer Mode selection. */
+ __IO uint32_t BITMODE; /*!< Sets timer behaviour. */
+ __I uint32_t RESERVED5;
+ __IO uint32_t PRESCALER; /*!< 4-bit prescaler to source clock frequency (max value 9). Source
+ clock frequency is divided by 2^SCALE. */
+ __I uint32_t RESERVED6[11];
+ __IO uint32_t CC[4]; /*!< Capture/compare registers. */
+ __I uint32_t RESERVED7[683];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_TIMER_Type;
+
+
+/* ================================================================================ */
+/* ================ RTC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Real time counter 0. (RTC)
+ */
+
+typedef struct { /*!< RTC Structure */
+ __O uint32_t TASKS_START; /*!< Start RTC Counter. */
+ __O uint32_t TASKS_STOP; /*!< Stop RTC Counter. */
+ __O uint32_t TASKS_CLEAR; /*!< Clear RTC Counter. */
+ __O uint32_t TASKS_TRIGOVRFLW; /*!< Set COUNTER to 0xFFFFFFF0. */
+ __I uint32_t RESERVED0[60];
+ __IO uint32_t EVENTS_TICK; /*!< Event on COUNTER increment. */
+ __IO uint32_t EVENTS_OVRFLW; /*!< Event on COUNTER overflow. */
+ __I uint32_t RESERVED1[14];
+ __IO uint32_t EVENTS_COMPARE[4]; /*!< Compare event on CC[n] match. */
+ __I uint32_t RESERVED2[109];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[13];
+ __IO uint32_t EVTEN; /*!< Configures event enable routing to PPI for each RTC event. */
+ __IO uint32_t EVTENSET; /*!< Enable events routing to PPI. The reading of this register gives
+ the value of EVTEN. */
+ __IO uint32_t EVTENCLR; /*!< Disable events routing to PPI. The reading of this register
+ gives the value of EVTEN. */
+ __I uint32_t RESERVED4[110];
+ __I uint32_t COUNTER; /*!< Current COUNTER value. */
+ __IO uint32_t PRESCALER; /*!< 12-bit prescaler for COUNTER frequency (32768/(PRESCALER+1)).
+ Must be written when RTC is STOPed. */
+ __I uint32_t RESERVED5[13];
+ __IO uint32_t CC[4]; /*!< Capture/compare registers. */
+ __I uint32_t RESERVED6[683];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_RTC_Type;
+
+
+/* ================================================================================ */
+/* ================ TEMP ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Temperature Sensor. (TEMP)
+ */
+
+typedef struct { /*!< TEMP Structure */
+ __O uint32_t TASKS_START; /*!< Start temperature measurement. */
+ __O uint32_t TASKS_STOP; /*!< Stop temperature measurement. */
+ __I uint32_t RESERVED0[62];
+ __IO uint32_t EVENTS_DATARDY; /*!< Temperature measurement complete, data ready event. */
+ __I uint32_t RESERVED1[128];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED2[127];
+ __I int32_t TEMP; /*!< Die temperature in degC, 2's complement format, 0.25 degC pecision. */
+ __I uint32_t RESERVED3[700];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_TEMP_Type;
+
+
+/* ================================================================================ */
+/* ================ RNG ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Random Number Generator. (RNG)
+ */
+
+typedef struct { /*!< RNG Structure */
+ __O uint32_t TASKS_START; /*!< Start the random number generator. */
+ __O uint32_t TASKS_STOP; /*!< Stop the random number generator. */
+ __I uint32_t RESERVED0[62];
+ __IO uint32_t EVENTS_VALRDY; /*!< New random number generated and written to VALUE register. */
+ __I uint32_t RESERVED1[63];
+ __IO uint32_t SHORTS; /*!< Shortcuts for the RNG. */
+ __I uint32_t RESERVED2[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register */
+ __I uint32_t RESERVED3[126];
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+ __I uint32_t VALUE; /*!< RNG random number. */
+ __I uint32_t RESERVED4[700];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_RNG_Type;
+
+
+/* ================================================================================ */
+/* ================ ECB ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief AES ECB Mode Encryption. (ECB)
+ */
+
+typedef struct { /*!< ECB Structure */
+ __O uint32_t TASKS_STARTECB; /*!< Start ECB block encrypt. If a crypto operation is running, this
+ will not initiate a new encryption and the ERRORECB event will
+ be triggered. */
+ __O uint32_t TASKS_STOPECB; /*!< Stop current ECB encryption. If a crypto operation is running,
+ this will will trigger the ERRORECB event. */
+ __I uint32_t RESERVED0[62];
+ __IO uint32_t EVENTS_ENDECB; /*!< ECB block encrypt complete. */
+ __IO uint32_t EVENTS_ERRORECB; /*!< ECB block encrypt aborted due to a STOPECB task or due to an
+ error. */
+ __I uint32_t RESERVED1[127];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED2[126];
+ __IO uint32_t ECBDATAPTR; /*!< ECB block encrypt memory pointer. */
+ __I uint32_t RESERVED3[701];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_ECB_Type;
+
+
+/* ================================================================================ */
+/* ================ AAR ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Accelerated Address Resolver. (AAR)
+ */
+
+typedef struct { /*!< AAR Structure */
+ __O uint32_t TASKS_START; /*!< Start resolving addresses based on IRKs specified in the IRK
+ data structure. */
+ __I uint32_t RESERVED0;
+ __O uint32_t TASKS_STOP; /*!< Stop resolving addresses. */
+ __I uint32_t RESERVED1[61];
+ __IO uint32_t EVENTS_END; /*!< Address resolution procedure completed. */
+ __IO uint32_t EVENTS_RESOLVED; /*!< Address resolved. */
+ __IO uint32_t EVENTS_NOTRESOLVED; /*!< Address not resolved. */
+ __I uint32_t RESERVED2[126];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[61];
+ __I uint32_t STATUS; /*!< Resolution status. */
+ __I uint32_t RESERVED4[63];
+ __IO uint32_t ENABLE; /*!< Enable AAR. */
+ __IO uint32_t NIRK; /*!< Number of Identity root Keys in the IRK data structure. */
+ __IO uint32_t IRKPTR; /*!< Pointer to the IRK data structure. */
+ __I uint32_t RESERVED5;
+ __IO uint32_t ADDRPTR; /*!< Pointer to the resolvable address (6 bytes). */
+ __IO uint32_t SCRATCHPTR; /*!< Pointer to a "scratch" data area used for temporary storage
+ during resolution. A minimum of 3 bytes must be reserved. */
+ __I uint32_t RESERVED6[697];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_AAR_Type;
+
+
+/* ================================================================================ */
+/* ================ CCM ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief AES CCM Mode Encryption. (CCM)
+ */
+
+typedef struct { /*!< CCM Structure */
+ __O uint32_t TASKS_KSGEN; /*!< Start generation of key-stream. This operation will stop by
+ itself when completed. */
+ __O uint32_t TASKS_CRYPT; /*!< Start encrypt/decrypt. This operation will stop by itself when
+ completed. */
+ __O uint32_t TASKS_STOP; /*!< Stop encrypt/decrypt. */
+ __I uint32_t RESERVED0[61];
+ __IO uint32_t EVENTS_ENDKSGEN; /*!< Keystream generation completed. */
+ __IO uint32_t EVENTS_ENDCRYPT; /*!< Encrypt/decrypt completed. */
+ __IO uint32_t EVENTS_ERROR; /*!< Error happened. */
+ __I uint32_t RESERVED1[61];
+ __IO uint32_t SHORTS; /*!< Shortcuts for the CCM. */
+ __I uint32_t RESERVED2[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[61];
+ __I uint32_t MICSTATUS; /*!< CCM RX MIC check result. */
+ __I uint32_t RESERVED4[63];
+ __IO uint32_t ENABLE; /*!< CCM enable. */
+ __IO uint32_t MODE; /*!< Operation mode. */
+ __IO uint32_t CNFPTR; /*!< Pointer to a data structure holding AES key and NONCE vector. */
+ __IO uint32_t INPTR; /*!< Pointer to the input packet. */
+ __IO uint32_t OUTPTR; /*!< Pointer to the output packet. */
+ __IO uint32_t SCRATCHPTR; /*!< Pointer to a "scratch" data area used for temporary storage
+ during resolution. A minimum of 43 bytes must be reserved. */
+ __I uint32_t RESERVED5[697];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_CCM_Type;
+
+
+/* ================================================================================ */
+/* ================ WDT ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Watchdog Timer. (WDT)
+ */
+
+typedef struct { /*!< WDT Structure */
+ __O uint32_t TASKS_START; /*!< Start the watchdog. */
+ __I uint32_t RESERVED0[63];
+ __IO uint32_t EVENTS_TIMEOUT; /*!< Watchdog timeout. */
+ __I uint32_t RESERVED1[128];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED2[61];
+ __I uint32_t RUNSTATUS; /*!< Watchdog running status. */
+ __I uint32_t REQSTATUS; /*!< Request status. */
+ __I uint32_t RESERVED3[63];
+ __IO uint32_t CRV; /*!< Counter reload value in number of 32kiHz clock cycles. */
+ __IO uint32_t RREN; /*!< Reload request enable. */
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+ __I uint32_t RESERVED4[60];
+ __O uint32_t RR[8]; /*!< Reload requests registers. */
+ __I uint32_t RESERVED5[631];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_WDT_Type;
+
+
+/* ================================================================================ */
+/* ================ QDEC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Rotary decoder. (QDEC)
+ */
+
+typedef struct { /*!< QDEC Structure */
+ __O uint32_t TASKS_START; /*!< Start the quadrature decoder. */
+ __O uint32_t TASKS_STOP; /*!< Stop the quadrature decoder. */
+ __O uint32_t TASKS_READCLRACC; /*!< Transfers the content from ACC registers to ACCREAD registers,
+ and clears the ACC registers. */
+ __I uint32_t RESERVED0[61];
+ __IO uint32_t EVENTS_SAMPLERDY; /*!< A new sample is written to the sample register. */
+ __IO uint32_t EVENTS_REPORTRDY; /*!< REPORTPER number of samples accumulated in ACC register, and
+ ACC register different than zero. */
+ __IO uint32_t EVENTS_ACCOF; /*!< ACC or ACCDBL register overflow. */
+ __I uint32_t RESERVED1[61];
+ __IO uint32_t SHORTS; /*!< Shortcuts for the QDEC. */
+ __I uint32_t RESERVED2[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[125];
+ __IO uint32_t ENABLE; /*!< Enable the QDEC. */
+ __IO uint32_t LEDPOL; /*!< LED output pin polarity. */
+ __IO uint32_t SAMPLEPER; /*!< Sample period. */
+ __I int32_t SAMPLE; /*!< Motion sample value. */
+ __IO uint32_t REPORTPER; /*!< Number of samples to generate an EVENT_REPORTRDY. */
+ __I int32_t ACC; /*!< Accumulated valid transitions register. */
+ __I int32_t ACCREAD; /*!< Snapshot of ACC register. Value generated by the TASKS_READCLEACC
+ task. */
+ __IO uint32_t PSELLED; /*!< Pin select for LED output. */
+ __IO uint32_t PSELA; /*!< Pin select for phase A input. */
+ __IO uint32_t PSELB; /*!< Pin select for phase B input. */
+ __IO uint32_t DBFEN; /*!< Enable debouncer input filters. */
+ __I uint32_t RESERVED4[5];
+ __IO uint32_t LEDPRE; /*!< Time LED is switched ON before the sample. */
+ __I uint32_t ACCDBL; /*!< Accumulated double (error) transitions register. */
+ __I uint32_t ACCDBLREAD; /*!< Snapshot of ACCDBL register. Value generated by the TASKS_READCLEACC
+ task. */
+ __I uint32_t RESERVED5[684];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_QDEC_Type;
+
+
+/* ================================================================================ */
+/* ================ LPCOMP ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Low power comparator. (LPCOMP)
+ */
+
+typedef struct { /*!< LPCOMP Structure */
+ __O uint32_t TASKS_START; /*!< Start the comparator. */
+ __O uint32_t TASKS_STOP; /*!< Stop the comparator. */
+ __O uint32_t TASKS_SAMPLE; /*!< Sample comparator value. */
+ __I uint32_t RESERVED0[61];
+ __IO uint32_t EVENTS_READY; /*!< LPCOMP is ready and output is valid. */
+ __IO uint32_t EVENTS_DOWN; /*!< Input voltage crossed the threshold going down. */
+ __IO uint32_t EVENTS_UP; /*!< Input voltage crossed the threshold going up. */
+ __IO uint32_t EVENTS_CROSS; /*!< Input voltage crossed the threshold in any direction. */
+ __I uint32_t RESERVED1[60];
+ __IO uint32_t SHORTS; /*!< Shortcuts for the LPCOMP. */
+ __I uint32_t RESERVED2[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[61];
+ __I uint32_t RESULT; /*!< Result of last compare. */
+ __I uint32_t RESERVED4[63];
+ __IO uint32_t ENABLE; /*!< Enable the LPCOMP. */
+ __IO uint32_t PSEL; /*!< Input pin select. */
+ __IO uint32_t REFSEL; /*!< Reference select. */
+ __IO uint32_t EXTREFSEL; /*!< External reference select. */
+ __I uint32_t RESERVED5[4];
+ __IO uint32_t ANADETECT; /*!< Analog detect configuration. */
+ __I uint32_t RESERVED6[694];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_LPCOMP_Type;
+
+
+/* ================================================================================ */
+/* ================ SWI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief SW Interrupts. (SWI)
+ */
+
+typedef struct { /*!< SWI Structure */
+ __I uint32_t UNUSED; /*!< Unused. */
+} NRF_SWI_Type;
+
+
+/* ================================================================================ */
+/* ================ NVMC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Non Volatile Memory Controller. (NVMC)
+ */
+
+typedef struct { /*!< NVMC Structure */
+ __I uint32_t RESERVED0[256];
+ __I uint32_t READY; /*!< Ready flag. */
+ __I uint32_t RESERVED1[64];
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+ __IO uint32_t ERASEPAGE; /*!< Register for erasing a non-protected non-volatile memory page. */
+ __IO uint32_t ERASEALL; /*!< Register for erasing all non-volatile user memory. */
+ __IO uint32_t ERASEPROTECTEDPAGE; /*!< Register for erasing a protected non-volatile memory page. */
+ __IO uint32_t ERASEUICR; /*!< Register for start erasing User Information Congfiguration Registers. */
+} NRF_NVMC_Type;
+
+
+/* ================================================================================ */
+/* ================ PPI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief PPI controller. (PPI)
+ */
+
+typedef struct { /*!< PPI Structure */
+ PPI_TASKS_CHG_Type TASKS_CHG[4]; /*!< Channel group tasks. */
+ __I uint32_t RESERVED0[312];
+ __IO uint32_t CHEN; /*!< Channel enable. */
+ __IO uint32_t CHENSET; /*!< Channel enable set. */
+ __IO uint32_t CHENCLR; /*!< Channel enable clear. */
+ __I uint32_t RESERVED1;
+ PPI_CH_Type CH[16]; /*!< PPI Channel. */
+ __I uint32_t RESERVED2[156];
+ __IO uint32_t CHG[4]; /*!< Channel group configuration. */
+} NRF_PPI_Type;
+
+
+/* ================================================================================ */
+/* ================ FICR ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Factory Information Configuration. (FICR)
+ */
+
+typedef struct { /*!< FICR Structure */
+ __I uint32_t RESERVED0[4];
+ __I uint32_t CODEPAGESIZE; /*!< Code memory page size in bytes. */
+ __I uint32_t CODESIZE; /*!< Code memory size in pages. */
+ __I uint32_t RESERVED1[4];
+ __I uint32_t CLENR0; /*!< Length of code region 0 in bytes. */
+ __I uint32_t PPFC; /*!< Pre-programmed factory code present. */
+ __I uint32_t RESERVED2;
+ __I uint32_t NUMRAMBLOCK; /*!< Number of individualy controllable RAM blocks. */
+
+ union {
+ __I uint32_t SIZERAMBLOCK[4]; /*!< Deprecated array of size of RAM block in bytes. This name is
+ kept for backward compatinility purposes. Use SIZERAMBLOCKS
+ instead. */
+ __I uint32_t SIZERAMBLOCKS; /*!< Size of RAM blocks in bytes. */
+ };
+ __I uint32_t RESERVED3[5];
+ __I uint32_t CONFIGID; /*!< Configuration identifier. */
+ __I uint32_t DEVICEID[2]; /*!< Device identifier. */
+ __I uint32_t RESERVED4[6];
+ __I uint32_t ER[4]; /*!< Encryption root. */
+ __I uint32_t IR[4]; /*!< Identity root. */
+ __I uint32_t DEVICEADDRTYPE; /*!< Device address type. */
+ __I uint32_t DEVICEADDR[2]; /*!< Device address. */
+ __I uint32_t OVERRIDEEN; /*!< Radio calibration override enable. */
+ __I uint32_t NRF_1MBIT[5]; /*!< Override values for the OVERRIDEn registers in RADIO for NRF_1Mbit
+ mode. */
+ __I uint32_t RESERVED5[10];
+ __I uint32_t BLE_1MBIT[5]; /*!< Override values for the OVERRIDEn registers in RADIO for BLE_1Mbit
+ mode. */
+ FICR_INFO_Type INFO; /*!< Device info */
+} NRF_FICR_Type;
+
+
+/* ================================================================================ */
+/* ================ UICR ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief User Information Configuration. (UICR)
+ */
+
+typedef struct { /*!< UICR Structure */
+ __IO uint32_t CLENR0; /*!< Length of code region 0. */
+ __IO uint32_t RBPCONF; /*!< Readback protection configuration. */
+ __IO uint32_t XTALFREQ; /*!< Reset value for CLOCK XTALFREQ register. */
+ __I uint32_t RESERVED0;
+ __I uint32_t FWID; /*!< Firmware ID. */
+ __IO uint32_t BOOTLOADERADDR; /*!< Bootloader start address. */
+} NRF_UICR_Type;
+
+
+/* ================================================================================ */
+/* ================ GPIO ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief General purpose input and output. (GPIO)
+ */
+
+typedef struct { /*!< GPIO Structure */
+ __I uint32_t RESERVED0[321];
+ __IO uint32_t OUT; /*!< Write GPIO port. */
+ __IO uint32_t OUTSET; /*!< Set individual bits in GPIO port. */
+ __IO uint32_t OUTCLR; /*!< Clear individual bits in GPIO port. */
+ __I uint32_t IN; /*!< Read GPIO port. */
+ __IO uint32_t DIR; /*!< Direction of GPIO pins. */
+ __IO uint32_t DIRSET; /*!< DIR set register. */
+ __IO uint32_t DIRCLR; /*!< DIR clear register. */
+ __I uint32_t RESERVED1[120];
+ __IO uint32_t PIN_CNF[32]; /*!< Configuration of GPIO pins. */
+} NRF_GPIO_Type;
+
+
+/* -------------------- End of section using anonymous unions ------------------- */
+#if defined(__CC_ARM)
+ #pragma pop
+#elif defined(__ICCARM__)
+ /* leave anonymous unions enabled */
+#elif defined(__GNUC__)
+ /* anonymous unions are enabled by default */
+#elif defined(__TMS470__)
+ /* anonymous unions are enabled by default */
+#elif defined(__TASKING__)
+ #pragma warning restore
+#else
+ #warning Not supported compiler type
+#endif
+
+
+
+
+/* ================================================================================ */
+/* ================ Peripheral memory map ================ */
+/* ================================================================================ */
+
+#define NRF_POWER_BASE 0x40000000UL
+#define NRF_CLOCK_BASE 0x40000000UL
+#define NRF_MPU_BASE 0x40000000UL
+#define NRF_PU_BASE 0x40000000UL
+#define NRF_AMLI_BASE 0x40000000UL
+#define NRF_RADIO_BASE 0x40001000UL
+#define NRF_UART0_BASE 0x40002000UL
+#define NRF_SPI0_BASE 0x40003000UL
+#define NRF_TWI0_BASE 0x40003000UL
+#define NRF_SPI1_BASE 0x40004000UL
+#define NRF_TWI1_BASE 0x40004000UL
+#define NRF_SPIS1_BASE 0x40004000UL
+#define NRF_SPIM1_BASE 0x40004000UL
+#define NRF_GPIOTE_BASE 0x40006000UL
+#define NRF_ADC_BASE 0x40007000UL
+#define NRF_TIMER0_BASE 0x40008000UL
+#define NRF_TIMER1_BASE 0x40009000UL
+#define NRF_TIMER2_BASE 0x4000A000UL
+#define NRF_RTC0_BASE 0x4000B000UL
+#define NRF_TEMP_BASE 0x4000C000UL
+#define NRF_RNG_BASE 0x4000D000UL
+#define NRF_ECB_BASE 0x4000E000UL
+#define NRF_AAR_BASE 0x4000F000UL
+#define NRF_CCM_BASE 0x4000F000UL
+#define NRF_WDT_BASE 0x40010000UL
+#define NRF_RTC1_BASE 0x40011000UL
+#define NRF_QDEC_BASE 0x40012000UL
+#define NRF_LPCOMP_BASE 0x40013000UL
+#define NRF_SWI_BASE 0x40014000UL
+#define NRF_NVMC_BASE 0x4001E000UL
+#define NRF_PPI_BASE 0x4001F000UL
+#define NRF_FICR_BASE 0x10000000UL
+#define NRF_UICR_BASE 0x10001000UL
+#define NRF_GPIO_BASE 0x50000000UL
+
+
+/* ================================================================================ */
+/* ================ Peripheral declaration ================ */
+/* ================================================================================ */
+
+#define NRF_POWER ((NRF_POWER_Type *) NRF_POWER_BASE)
+#define NRF_CLOCK ((NRF_CLOCK_Type *) NRF_CLOCK_BASE)
+#define NRF_MPU ((NRF_MPU_Type *) NRF_MPU_BASE)
+#define NRF_PU ((NRF_PU_Type *) NRF_PU_BASE)
+#define NRF_AMLI ((NRF_AMLI_Type *) NRF_AMLI_BASE)
+#define NRF_RADIO ((NRF_RADIO_Type *) NRF_RADIO_BASE)
+#define NRF_UART0 ((NRF_UART_Type *) NRF_UART0_BASE)
+#define NRF_SPI0 ((NRF_SPI_Type *) NRF_SPI0_BASE)
+#define NRF_TWI0 ((NRF_TWI_Type *) NRF_TWI0_BASE)
+#define NRF_SPI1 ((NRF_SPI_Type *) NRF_SPI1_BASE)
+#define NRF_TWI1 ((NRF_TWI_Type *) NRF_TWI1_BASE)
+#define NRF_SPIS1 ((NRF_SPIS_Type *) NRF_SPIS1_BASE)
+#define NRF_SPIM1 ((NRF_SPIM_Type *) NRF_SPIM1_BASE)
+#define NRF_GPIOTE ((NRF_GPIOTE_Type *) NRF_GPIOTE_BASE)
+#define NRF_ADC ((NRF_ADC_Type *) NRF_ADC_BASE)
+#define NRF_TIMER0 ((NRF_TIMER_Type *) NRF_TIMER0_BASE)
+#define NRF_TIMER1 ((NRF_TIMER_Type *) NRF_TIMER1_BASE)
+#define NRF_TIMER2 ((NRF_TIMER_Type *) NRF_TIMER2_BASE)
+#define NRF_RTC0 ((NRF_RTC_Type *) NRF_RTC0_BASE)
+#define NRF_TEMP ((NRF_TEMP_Type *) NRF_TEMP_BASE)
+#define NRF_RNG ((NRF_RNG_Type *) NRF_RNG_BASE)
+#define NRF_ECB ((NRF_ECB_Type *) NRF_ECB_BASE)
+#define NRF_AAR ((NRF_AAR_Type *) NRF_AAR_BASE)
+#define NRF_CCM ((NRF_CCM_Type *) NRF_CCM_BASE)
+#define NRF_WDT ((NRF_WDT_Type *) NRF_WDT_BASE)
+#define NRF_RTC1 ((NRF_RTC_Type *) NRF_RTC1_BASE)
+#define NRF_QDEC ((NRF_QDEC_Type *) NRF_QDEC_BASE)
+#define NRF_LPCOMP ((NRF_LPCOMP_Type *) NRF_LPCOMP_BASE)
+#define NRF_SWI ((NRF_SWI_Type *) NRF_SWI_BASE)
+#define NRF_NVMC ((NRF_NVMC_Type *) NRF_NVMC_BASE)
+#define NRF_PPI ((NRF_PPI_Type *) NRF_PPI_BASE)
+#define NRF_FICR ((NRF_FICR_Type *) NRF_FICR_BASE)
+#define NRF_UICR ((NRF_UICR_Type *) NRF_UICR_BASE)
+#define NRF_GPIO ((NRF_GPIO_Type *) NRF_GPIO_BASE)
+
+
+/** @} */ /* End of group Device_Peripheral_Registers */
+/** @} */ /* End of group nRF51 */
+/** @} */ /* End of group Nordic Semiconductor */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* nRF51_H */
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_DELTA_DFCM_NNN40/nrf51_bitfields.h Tue Jun 09 14:29:26 2015 +0100 @@ -0,0 +1,7135 @@ +/* Copyright (c) 2013, Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * * Neither the name of Nordic Semiconductor ASA nor the names of its + * contributors may be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ +#ifndef __NRF51_BITS_H +#define __NRF51_BITS_H + +/*lint ++flb "Enter library region */ + +#include <core_cm0.h> + +/* Peripheral: AAR */ +/* Description: Accelerated Address Resolver. */ + +/* Register: AAR_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 2 : Enable interrupt on NOTRESOLVED event. */ +#define AAR_INTENSET_NOTRESOLVED_Pos (2UL) /*!< Position of NOTRESOLVED field. */ +#define AAR_INTENSET_NOTRESOLVED_Msk (0x1UL << AAR_INTENSET_NOTRESOLVED_Pos) /*!< Bit mask of NOTRESOLVED field. */ +#define AAR_INTENSET_NOTRESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENSET_NOTRESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENSET_NOTRESOLVED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on RESOLVED event. */ +#define AAR_INTENSET_RESOLVED_Pos (1UL) /*!< Position of RESOLVED field. */ +#define AAR_INTENSET_RESOLVED_Msk (0x1UL << AAR_INTENSET_RESOLVED_Pos) /*!< Bit mask of RESOLVED field. */ +#define AAR_INTENSET_RESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENSET_RESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENSET_RESOLVED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on END event. */ +#define AAR_INTENSET_END_Pos (0UL) /*!< Position of END field. */ +#define AAR_INTENSET_END_Msk (0x1UL << AAR_INTENSET_END_Pos) /*!< Bit mask of END field. */ +#define AAR_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: AAR_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 2 : Disable interrupt on NOTRESOLVED event. */ +#define AAR_INTENCLR_NOTRESOLVED_Pos (2UL) /*!< Position of NOTRESOLVED field. */ +#define AAR_INTENCLR_NOTRESOLVED_Msk (0x1UL << AAR_INTENCLR_NOTRESOLVED_Pos) /*!< Bit mask of NOTRESOLVED field. */ +#define AAR_INTENCLR_NOTRESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENCLR_NOTRESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENCLR_NOTRESOLVED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on RESOLVED event. */ +#define AAR_INTENCLR_RESOLVED_Pos (1UL) /*!< Position of RESOLVED field. */ +#define AAR_INTENCLR_RESOLVED_Msk (0x1UL << AAR_INTENCLR_RESOLVED_Pos) /*!< Bit mask of RESOLVED field. */ +#define AAR_INTENCLR_RESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENCLR_RESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENCLR_RESOLVED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on ENDKSGEN event. */ +#define AAR_INTENCLR_END_Pos (0UL) /*!< Position of END field. */ +#define AAR_INTENCLR_END_Msk (0x1UL << AAR_INTENCLR_END_Pos) /*!< Bit mask of END field. */ +#define AAR_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: AAR_STATUS */ +/* Description: Resolution status. */ + +/* Bits 3..0 : The IRK used last time an address was resolved. */ +#define AAR_STATUS_STATUS_Pos (0UL) /*!< Position of STATUS field. */ +#define AAR_STATUS_STATUS_Msk (0xFUL << AAR_STATUS_STATUS_Pos) /*!< Bit mask of STATUS field. */ + +/* Register: AAR_ENABLE */ +/* Description: Enable AAR. */ + +/* Bits 1..0 : Enable AAR. */ +#define AAR_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define AAR_ENABLE_ENABLE_Msk (0x3UL << AAR_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define AAR_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled AAR. */ +#define AAR_ENABLE_ENABLE_Enabled (0x03UL) /*!< Enable AAR. */ + +/* Register: AAR_NIRK */ +/* Description: Number of Identity root Keys in the IRK data structure. */ + +/* Bits 4..0 : Number of Identity root Keys in the IRK data structure. */ +#define AAR_NIRK_NIRK_Pos (0UL) /*!< Position of NIRK field. */ +#define AAR_NIRK_NIRK_Msk (0x1FUL << AAR_NIRK_NIRK_Pos) /*!< Bit mask of NIRK field. */ + +/* Register: AAR_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define AAR_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define AAR_POWER_POWER_Msk (0x1UL << AAR_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define AAR_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define AAR_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: ADC */ +/* Description: Analog to digital converter. */ + +/* Register: ADC_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 0 : Enable interrupt on END event. */ +#define ADC_INTENSET_END_Pos (0UL) /*!< Position of END field. */ +#define ADC_INTENSET_END_Msk (0x1UL << ADC_INTENSET_END_Pos) /*!< Bit mask of END field. */ +#define ADC_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define ADC_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define ADC_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: ADC_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 0 : Disable interrupt on END event. */ +#define ADC_INTENCLR_END_Pos (0UL) /*!< Position of END field. */ +#define ADC_INTENCLR_END_Msk (0x1UL << ADC_INTENCLR_END_Pos) /*!< Bit mask of END field. */ +#define ADC_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define ADC_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define ADC_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: ADC_BUSY */ +/* Description: ADC busy register. */ + +/* Bit 0 : ADC busy register. */ +#define ADC_BUSY_BUSY_Pos (0UL) /*!< Position of BUSY field. */ +#define ADC_BUSY_BUSY_Msk (0x1UL << ADC_BUSY_BUSY_Pos) /*!< Bit mask of BUSY field. */ +#define ADC_BUSY_BUSY_Ready (0UL) /*!< No ongoing ADC conversion is taking place. ADC is ready. */ +#define ADC_BUSY_BUSY_Busy (1UL) /*!< An ADC conversion is taking place. ADC is busy. */ + +/* Register: ADC_ENABLE */ +/* Description: ADC enable. */ + +/* Bits 1..0 : ADC enable. */ +#define ADC_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define ADC_ENABLE_ENABLE_Msk (0x3UL << ADC_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define ADC_ENABLE_ENABLE_Disabled (0x00UL) /*!< ADC is disabled. */ +#define ADC_ENABLE_ENABLE_Enabled (0x01UL) /*!< ADC is enabled. If an analog input pin is selected as source of the conversion, the selected pin is configured as an analog input. */ + +/* Register: ADC_CONFIG */ +/* Description: ADC configuration register. */ + +/* Bits 17..16 : ADC external reference pin selection. */ +#define ADC_CONFIG_EXTREFSEL_Pos (16UL) /*!< Position of EXTREFSEL field. */ +#define ADC_CONFIG_EXTREFSEL_Msk (0x3UL << ADC_CONFIG_EXTREFSEL_Pos) /*!< Bit mask of EXTREFSEL field. */ +#define ADC_CONFIG_EXTREFSEL_None (0UL) /*!< Analog external reference inputs disabled. */ +#define ADC_CONFIG_EXTREFSEL_AnalogReference0 (1UL) /*!< Use analog reference 0 as reference. */ +#define ADC_CONFIG_EXTREFSEL_AnalogReference1 (2UL) /*!< Use analog reference 1 as reference. */ + +/* Bits 15..8 : ADC analog pin selection. */ +#define ADC_CONFIG_PSEL_Pos (8UL) /*!< Position of PSEL field. */ +#define ADC_CONFIG_PSEL_Msk (0xFFUL << ADC_CONFIG_PSEL_Pos) /*!< Bit mask of PSEL field. */ +#define ADC_CONFIG_PSEL_Disabled (0UL) /*!< Analog input pins disabled. */ +#define ADC_CONFIG_PSEL_AnalogInput0 (1UL) /*!< Use analog input 0 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput1 (2UL) /*!< Use analog input 1 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput2 (4UL) /*!< Use analog input 2 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput3 (8UL) /*!< Use analog input 3 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput4 (16UL) /*!< Use analog input 4 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput5 (32UL) /*!< Use analog input 5 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput6 (64UL) /*!< Use analog input 6 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput7 (128UL) /*!< Use analog input 7 as analog input. */ + +/* Bits 6..5 : ADC reference selection. */ +#define ADC_CONFIG_REFSEL_Pos (5UL) /*!< Position of REFSEL field. */ +#define ADC_CONFIG_REFSEL_Msk (0x3UL << ADC_CONFIG_REFSEL_Pos) /*!< Bit mask of REFSEL field. */ +#define ADC_CONFIG_REFSEL_VBG (0x00UL) /*!< Use internal 1.2V bandgap voltage as reference for conversion. */ +#define ADC_CONFIG_REFSEL_External (0x01UL) /*!< Use external source configured by EXTREFSEL as reference for conversion. */ +#define ADC_CONFIG_REFSEL_SupplyOneHalfPrescaling (0x02UL) /*!< Use supply voltage with 1/2 prescaling as reference for conversion. Only usable when supply voltage is between 1.7V and 2.6V. */ +#define ADC_CONFIG_REFSEL_SupplyOneThirdPrescaling (0x03UL) /*!< Use supply voltage with 1/3 prescaling as reference for conversion. Only usable when supply voltage is between 2.5V and 3.6V. */ + +/* Bits 4..2 : ADC input selection. */ +#define ADC_CONFIG_INPSEL_Pos (2UL) /*!< Position of INPSEL field. */ +#define ADC_CONFIG_INPSEL_Msk (0x7UL << ADC_CONFIG_INPSEL_Pos) /*!< Bit mask of INPSEL field. */ +#define ADC_CONFIG_INPSEL_AnalogInputNoPrescaling (0x00UL) /*!< Analog input specified by PSEL with no prescaling used as input for the conversion. */ +#define ADC_CONFIG_INPSEL_AnalogInputTwoThirdsPrescaling (0x01UL) /*!< Analog input specified by PSEL with 2/3 prescaling used as input for the conversion. */ +#define ADC_CONFIG_INPSEL_AnalogInputOneThirdPrescaling (0x02UL) /*!< Analog input specified by PSEL with 1/3 prescaling used as input for the conversion. */ +#define ADC_CONFIG_INPSEL_SupplyTwoThirdsPrescaling (0x05UL) /*!< Supply voltage with 2/3 prescaling used as input for the conversion. */ +#define ADC_CONFIG_INPSEL_SupplyOneThirdPrescaling (0x06UL) /*!< Supply voltage with 1/3 prescaling used as input for the conversion. */ + +/* Bits 1..0 : ADC resolution. */ +#define ADC_CONFIG_RES_Pos (0UL) /*!< Position of RES field. */ +#define ADC_CONFIG_RES_Msk (0x3UL << ADC_CONFIG_RES_Pos) /*!< Bit mask of RES field. */ +#define ADC_CONFIG_RES_8bit (0x00UL) /*!< 8bit ADC resolution. */ +#define ADC_CONFIG_RES_9bit (0x01UL) /*!< 9bit ADC resolution. */ +#define ADC_CONFIG_RES_10bit (0x02UL) /*!< 10bit ADC resolution. */ + +/* Register: ADC_RESULT */ +/* Description: Result of ADC conversion. */ + +/* Bits 9..0 : Result of ADC conversion. */ +#define ADC_RESULT_RESULT_Pos (0UL) /*!< Position of RESULT field. */ +#define ADC_RESULT_RESULT_Msk (0x3FFUL << ADC_RESULT_RESULT_Pos) /*!< Bit mask of RESULT field. */ + +/* Register: ADC_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define ADC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define ADC_POWER_POWER_Msk (0x1UL << ADC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define ADC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define ADC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: AMLI */ +/* Description: AHB Multi-Layer Interface. */ + +/* Register: AMLI_RAMPRI_CPU0 */ +/* Description: Configurable priority configuration register for CPU0. */ + +/* Bits 31..28 : Configuration field for RAM block 7. */ +#define AMLI_RAMPRI_CPU0_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ +#define AMLI_RAMPRI_CPU0_RAM7_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM7_Pos) /*!< Bit mask of RAM7 field. */ +#define AMLI_RAMPRI_CPU0_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CPU0_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CPU0_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CPU0_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CPU0_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CPU0_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CPU0_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CPU0_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 27..24 : Configuration field for RAM block 6. */ +#define AMLI_RAMPRI_CPU0_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ +#define AMLI_RAMPRI_CPU0_RAM6_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM6_Pos) /*!< Bit mask of RAM6 field. */ +#define AMLI_RAMPRI_CPU0_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CPU0_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CPU0_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CPU0_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CPU0_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CPU0_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CPU0_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CPU0_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 23..20 : Configuration field for RAM block 5. */ +#define AMLI_RAMPRI_CPU0_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ +#define AMLI_RAMPRI_CPU0_RAM5_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM5_Pos) /*!< Bit mask of RAM5 field. */ +#define AMLI_RAMPRI_CPU0_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CPU0_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CPU0_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CPU0_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CPU0_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CPU0_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CPU0_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CPU0_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 19..16 : Configuration field for RAM block 4. */ +#define AMLI_RAMPRI_CPU0_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ +#define AMLI_RAMPRI_CPU0_RAM4_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM4_Pos) /*!< Bit mask of RAM4 field. */ +#define AMLI_RAMPRI_CPU0_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CPU0_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CPU0_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CPU0_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CPU0_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CPU0_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CPU0_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CPU0_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_CPU0_RAM3_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM3_Pos) /*!< Bit mask of RAM3 field. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_CPU0_RAM2_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM2_Pos) /*!< Bit mask of RAM2 field. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_CPU0_RAM1_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM1_Pos) /*!< Bit mask of RAM1 field. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_CPU0_RAM0_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM0_Pos) /*!< Bit mask of RAM0 field. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Register: AMLI_RAMPRI_SPIS1 */ +/* Description: Configurable priority configuration register for SPIS1. */ + +/* Bits 31..28 : Configuration field for RAM block 7. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM7_Pos) /*!< Bit mask of RAM7 field. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_SPIS1_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 27..24 : Configuration field for RAM block 6. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM6_Pos) /*!< Bit mask of RAM6 field. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_SPIS1_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 23..20 : Configuration field for RAM block 5. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM5_Pos) /*!< Bit mask of RAM5 field. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_SPIS1_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 19..16 : Configuration field for RAM block 4. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM4_Pos) /*!< Bit mask of RAM4 field. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_SPIS1_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM3_Pos) /*!< Bit mask of RAM3 field. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM2_Pos) /*!< Bit mask of RAM2 field. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM1_Pos) /*!< Bit mask of RAM1 field. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM0_Pos) /*!< Bit mask of RAM0 field. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Register: AMLI_RAMPRI_RADIO */ +/* Description: Configurable priority configuration register for RADIO. */ + +/* Bits 31..28 : Configuration field for RAM block 7. */ +#define AMLI_RAMPRI_RADIO_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ +#define AMLI_RAMPRI_RADIO_RAM7_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM7_Pos) /*!< Bit mask of RAM7 field. */ +#define AMLI_RAMPRI_RADIO_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_RADIO_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_RADIO_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_RADIO_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_RADIO_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_RADIO_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_RADIO_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_RADIO_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 27..24 : Configuration field for RAM block 6. */ +#define AMLI_RAMPRI_RADIO_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ +#define AMLI_RAMPRI_RADIO_RAM6_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM6_Pos) /*!< Bit mask of RAM6 field. */ +#define AMLI_RAMPRI_RADIO_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_RADIO_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_RADIO_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_RADIO_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_RADIO_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_RADIO_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_RADIO_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_RADIO_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 23..20 : Configuration field for RAM block 5. */ +#define AMLI_RAMPRI_RADIO_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ +#define AMLI_RAMPRI_RADIO_RAM5_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM5_Pos) /*!< Bit mask of RAM5 field. */ +#define AMLI_RAMPRI_RADIO_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_RADIO_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_RADIO_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_RADIO_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_RADIO_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_RADIO_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_RADIO_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_RADIO_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 19..16 : Configuration field for RAM block 4. */ +#define AMLI_RAMPRI_RADIO_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ +#define AMLI_RAMPRI_RADIO_RAM4_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM4_Pos) /*!< Bit mask of RAM4 field. */ +#define AMLI_RAMPRI_RADIO_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_RADIO_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_RADIO_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_RADIO_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_RADIO_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_RADIO_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_RADIO_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_RADIO_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_RADIO_RAM3_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM3_Pos) /*!< Bit mask of RAM3 field. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_RADIO_RAM2_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM2_Pos) /*!< Bit mask of RAM2 field. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_RADIO_RAM1_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM1_Pos) /*!< Bit mask of RAM1 field. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_RADIO_RAM0_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM0_Pos) /*!< Bit mask of RAM0 field. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Register: AMLI_RAMPRI_ECB */ +/* Description: Configurable priority configuration register for ECB. */ + +/* Bits 31..28 : Configuration field for RAM block 7. */ +#define AMLI_RAMPRI_ECB_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ +#define AMLI_RAMPRI_ECB_RAM7_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM7_Pos) /*!< Bit mask of RAM7 field. */ +#define AMLI_RAMPRI_ECB_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_ECB_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_ECB_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_ECB_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_ECB_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_ECB_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_ECB_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_ECB_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 27..24 : Configuration field for RAM block 6. */ +#define AMLI_RAMPRI_ECB_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ +#define AMLI_RAMPRI_ECB_RAM6_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM6_Pos) /*!< Bit mask of RAM6 field. */ +#define AMLI_RAMPRI_ECB_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_ECB_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_ECB_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_ECB_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_ECB_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_ECB_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_ECB_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_ECB_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 23..20 : Configuration field for RAM block 5. */ +#define AMLI_RAMPRI_ECB_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ +#define AMLI_RAMPRI_ECB_RAM5_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM5_Pos) /*!< Bit mask of RAM5 field. */ +#define AMLI_RAMPRI_ECB_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_ECB_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_ECB_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_ECB_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_ECB_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_ECB_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_ECB_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_ECB_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 19..16 : Configuration field for RAM block 4. */ +#define AMLI_RAMPRI_ECB_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ +#define AMLI_RAMPRI_ECB_RAM4_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM4_Pos) /*!< Bit mask of RAM4 field. */ +#define AMLI_RAMPRI_ECB_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_ECB_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_ECB_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_ECB_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_ECB_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_ECB_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_ECB_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_ECB_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_ECB_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_ECB_RAM3_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM3_Pos) /*!< Bit mask of RAM3 field. */ +#define AMLI_RAMPRI_ECB_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_ECB_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_ECB_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_ECB_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_ECB_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_ECB_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_ECB_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_ECB_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_ECB_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_ECB_RAM2_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM2_Pos) /*!< Bit mask of RAM2 field. */ +#define AMLI_RAMPRI_ECB_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_ECB_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_ECB_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_ECB_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_ECB_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_ECB_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_ECB_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_ECB_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_ECB_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_ECB_RAM1_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM1_Pos) /*!< Bit mask of RAM1 field. */ +#define AMLI_RAMPRI_ECB_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_ECB_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_ECB_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_ECB_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_ECB_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_ECB_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_ECB_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_ECB_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_ECB_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_ECB_RAM0_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM0_Pos) /*!< Bit mask of RAM0 field. */ +#define AMLI_RAMPRI_ECB_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_ECB_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_ECB_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_ECB_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_ECB_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_ECB_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_ECB_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_ECB_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Register: AMLI_RAMPRI_CCM */ +/* Description: Configurable priority configuration register for CCM. */ + +/* Bits 31..28 : Configuration field for RAM block 7. */ +#define AMLI_RAMPRI_CCM_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ +#define AMLI_RAMPRI_CCM_RAM7_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM7_Pos) /*!< Bit mask of RAM7 field. */ +#define AMLI_RAMPRI_CCM_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CCM_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CCM_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CCM_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CCM_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CCM_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CCM_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CCM_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 27..24 : Configuration field for RAM block 6. */ +#define AMLI_RAMPRI_CCM_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ +#define AMLI_RAMPRI_CCM_RAM6_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM6_Pos) /*!< Bit mask of RAM6 field. */ +#define AMLI_RAMPRI_CCM_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CCM_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CCM_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CCM_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CCM_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CCM_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CCM_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CCM_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 23..20 : Configuration field for RAM block 5. */ +#define AMLI_RAMPRI_CCM_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ +#define AMLI_RAMPRI_CCM_RAM5_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM5_Pos) /*!< Bit mask of RAM5 field. */ +#define AMLI_RAMPRI_CCM_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CCM_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CCM_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CCM_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CCM_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CCM_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CCM_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CCM_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 19..16 : Configuration field for RAM block 4. */ +#define AMLI_RAMPRI_CCM_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ +#define AMLI_RAMPRI_CCM_RAM4_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM4_Pos) /*!< Bit mask of RAM4 field. */ +#define AMLI_RAMPRI_CCM_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CCM_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CCM_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CCM_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CCM_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CCM_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CCM_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CCM_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_CCM_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_CCM_RAM3_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM3_Pos) /*!< Bit mask of RAM3 field. */ +#define AMLI_RAMPRI_CCM_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CCM_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CCM_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CCM_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CCM_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CCM_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CCM_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CCM_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_CCM_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_CCM_RAM2_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM2_Pos) /*!< Bit mask of RAM2 field. */ +#define AMLI_RAMPRI_CCM_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CCM_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CCM_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CCM_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CCM_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CCM_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CCM_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CCM_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_CCM_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_CCM_RAM1_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM1_Pos) /*!< Bit mask of RAM1 field. */ +#define AMLI_RAMPRI_CCM_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CCM_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CCM_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CCM_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CCM_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CCM_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CCM_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CCM_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_CCM_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_CCM_RAM0_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM0_Pos) /*!< Bit mask of RAM0 field. */ +#define AMLI_RAMPRI_CCM_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_CCM_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_CCM_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_CCM_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_CCM_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_CCM_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_CCM_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_CCM_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Register: AMLI_RAMPRI_AAR */ +/* Description: Configurable priority configuration register for AAR. */ + +/* Bits 31..28 : Configuration field for RAM block 7. */ +#define AMLI_RAMPRI_AAR_RAM7_Pos (28UL) /*!< Position of RAM7 field. */ +#define AMLI_RAMPRI_AAR_RAM7_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM7_Pos) /*!< Bit mask of RAM7 field. */ +#define AMLI_RAMPRI_AAR_RAM7_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_AAR_RAM7_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_AAR_RAM7_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_AAR_RAM7_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_AAR_RAM7_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_AAR_RAM7_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_AAR_RAM7_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_AAR_RAM7_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 27..24 : Configuration field for RAM block 6. */ +#define AMLI_RAMPRI_AAR_RAM6_Pos (24UL) /*!< Position of RAM6 field. */ +#define AMLI_RAMPRI_AAR_RAM6_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM6_Pos) /*!< Bit mask of RAM6 field. */ +#define AMLI_RAMPRI_AAR_RAM6_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_AAR_RAM6_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_AAR_RAM6_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_AAR_RAM6_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_AAR_RAM6_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_AAR_RAM6_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_AAR_RAM6_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_AAR_RAM6_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 23..20 : Configuration field for RAM block 5. */ +#define AMLI_RAMPRI_AAR_RAM5_Pos (20UL) /*!< Position of RAM5 field. */ +#define AMLI_RAMPRI_AAR_RAM5_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM5_Pos) /*!< Bit mask of RAM5 field. */ +#define AMLI_RAMPRI_AAR_RAM5_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_AAR_RAM5_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_AAR_RAM5_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_AAR_RAM5_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_AAR_RAM5_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_AAR_RAM5_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_AAR_RAM5_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_AAR_RAM5_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 19..16 : Configuration field for RAM block 4. */ +#define AMLI_RAMPRI_AAR_RAM4_Pos (16UL) /*!< Position of RAM4 field. */ +#define AMLI_RAMPRI_AAR_RAM4_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM4_Pos) /*!< Bit mask of RAM4 field. */ +#define AMLI_RAMPRI_AAR_RAM4_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_AAR_RAM4_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_AAR_RAM4_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_AAR_RAM4_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_AAR_RAM4_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_AAR_RAM4_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_AAR_RAM4_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_AAR_RAM4_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_AAR_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_AAR_RAM3_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM3_Pos) /*!< Bit mask of RAM3 field. */ +#define AMLI_RAMPRI_AAR_RAM3_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_AAR_RAM3_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_AAR_RAM3_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_AAR_RAM3_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_AAR_RAM3_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_AAR_RAM3_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_AAR_RAM3_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_AAR_RAM3_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_AAR_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_AAR_RAM2_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM2_Pos) /*!< Bit mask of RAM2 field. */ +#define AMLI_RAMPRI_AAR_RAM2_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_AAR_RAM2_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_AAR_RAM2_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_AAR_RAM2_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_AAR_RAM2_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_AAR_RAM2_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_AAR_RAM2_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_AAR_RAM2_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_AAR_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_AAR_RAM1_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM1_Pos) /*!< Bit mask of RAM1 field. */ +#define AMLI_RAMPRI_AAR_RAM1_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_AAR_RAM1_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_AAR_RAM1_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_AAR_RAM1_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_AAR_RAM1_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_AAR_RAM1_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_AAR_RAM1_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_AAR_RAM1_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_AAR_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_AAR_RAM0_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM0_Pos) /*!< Bit mask of RAM0 field. */ +#define AMLI_RAMPRI_AAR_RAM0_Pri0 (0x0UL) /*!< Priority 0. */ +#define AMLI_RAMPRI_AAR_RAM0_Pri2 (0x2UL) /*!< Priority 2. */ +#define AMLI_RAMPRI_AAR_RAM0_Pri4 (0x4UL) /*!< Priority 4. */ +#define AMLI_RAMPRI_AAR_RAM0_Pri6 (0x6UL) /*!< Priority 6. */ +#define AMLI_RAMPRI_AAR_RAM0_Pri8 (0x8UL) /*!< Priority 8. */ +#define AMLI_RAMPRI_AAR_RAM0_Pri10 (0xAUL) /*!< Priority 10. */ +#define AMLI_RAMPRI_AAR_RAM0_Pri12 (0xCUL) /*!< Priority 12. */ +#define AMLI_RAMPRI_AAR_RAM0_Pri14 (0xEUL) /*!< Priority 14. */ + +/* Peripheral: CCM */ +/* Description: AES CCM Mode Encryption. */ + +/* Register: CCM_SHORTS */ +/* Description: Shortcuts for the CCM. */ + +/* Bit 0 : Shortcut between ENDKSGEN event and CRYPT task. */ +#define CCM_SHORTS_ENDKSGEN_CRYPT_Pos (0UL) /*!< Position of ENDKSGEN_CRYPT field. */ +#define CCM_SHORTS_ENDKSGEN_CRYPT_Msk (0x1UL << CCM_SHORTS_ENDKSGEN_CRYPT_Pos) /*!< Bit mask of ENDKSGEN_CRYPT field. */ +#define CCM_SHORTS_ENDKSGEN_CRYPT_Disabled (0UL) /*!< Shortcut disabled. */ +#define CCM_SHORTS_ENDKSGEN_CRYPT_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: CCM_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 2 : Enable interrupt on ERROR event. */ +#define CCM_INTENSET_ERROR_Pos (2UL) /*!< Position of ERROR field. */ +#define CCM_INTENSET_ERROR_Msk (0x1UL << CCM_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */ +#define CCM_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on ENDCRYPT event. */ +#define CCM_INTENSET_ENDCRYPT_Pos (1UL) /*!< Position of ENDCRYPT field. */ +#define CCM_INTENSET_ENDCRYPT_Msk (0x1UL << CCM_INTENSET_ENDCRYPT_Pos) /*!< Bit mask of ENDCRYPT field. */ +#define CCM_INTENSET_ENDCRYPT_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENSET_ENDCRYPT_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENSET_ENDCRYPT_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on ENDKSGEN event. */ +#define CCM_INTENSET_ENDKSGEN_Pos (0UL) /*!< Position of ENDKSGEN field. */ +#define CCM_INTENSET_ENDKSGEN_Msk (0x1UL << CCM_INTENSET_ENDKSGEN_Pos) /*!< Bit mask of ENDKSGEN field. */ +#define CCM_INTENSET_ENDKSGEN_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENSET_ENDKSGEN_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENSET_ENDKSGEN_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: CCM_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 2 : Disable interrupt on ERROR event. */ +#define CCM_INTENCLR_ERROR_Pos (2UL) /*!< Position of ERROR field. */ +#define CCM_INTENCLR_ERROR_Msk (0x1UL << CCM_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */ +#define CCM_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on ENDCRYPT event. */ +#define CCM_INTENCLR_ENDCRYPT_Pos (1UL) /*!< Position of ENDCRYPT field. */ +#define CCM_INTENCLR_ENDCRYPT_Msk (0x1UL << CCM_INTENCLR_ENDCRYPT_Pos) /*!< Bit mask of ENDCRYPT field. */ +#define CCM_INTENCLR_ENDCRYPT_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENCLR_ENDCRYPT_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENCLR_ENDCRYPT_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on ENDKSGEN event. */ +#define CCM_INTENCLR_ENDKSGEN_Pos (0UL) /*!< Position of ENDKSGEN field. */ +#define CCM_INTENCLR_ENDKSGEN_Msk (0x1UL << CCM_INTENCLR_ENDKSGEN_Pos) /*!< Bit mask of ENDKSGEN field. */ +#define CCM_INTENCLR_ENDKSGEN_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENCLR_ENDKSGEN_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENCLR_ENDKSGEN_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: CCM_MICSTATUS */ +/* Description: CCM RX MIC check result. */ + +/* Bit 0 : Result of the MIC check performed during the previous CCM RX STARTCRYPT */ +#define CCM_MICSTATUS_MICSTATUS_Pos (0UL) /*!< Position of MICSTATUS field. */ +#define CCM_MICSTATUS_MICSTATUS_Msk (0x1UL << CCM_MICSTATUS_MICSTATUS_Pos) /*!< Bit mask of MICSTATUS field. */ +#define CCM_MICSTATUS_MICSTATUS_CheckFailed (0UL) /*!< MIC check failed. */ +#define CCM_MICSTATUS_MICSTATUS_CheckPassed (1UL) /*!< MIC check passed. */ + +/* Register: CCM_ENABLE */ +/* Description: CCM enable. */ + +/* Bits 1..0 : CCM enable. */ +#define CCM_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define CCM_ENABLE_ENABLE_Msk (0x3UL << CCM_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define CCM_ENABLE_ENABLE_Disabled (0x00UL) /*!< CCM is disabled. */ +#define CCM_ENABLE_ENABLE_Enabled (0x02UL) /*!< CCM is enabled. */ + +/* Register: CCM_MODE */ +/* Description: Operation mode. */ + +/* Bit 0 : CCM mode operation. */ +#define CCM_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */ +#define CCM_MODE_MODE_Msk (0x1UL << CCM_MODE_MODE_Pos) /*!< Bit mask of MODE field. */ +#define CCM_MODE_MODE_Encryption (0UL) /*!< CCM mode TX */ +#define CCM_MODE_MODE_Decryption (1UL) /*!< CCM mode TX */ + +/* Register: CCM_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define CCM_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define CCM_POWER_POWER_Msk (0x1UL << CCM_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define CCM_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define CCM_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: CLOCK */ +/* Description: Clock control. */ + +/* Register: CLOCK_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 4 : Enable interrupt on CTTO event. */ +#define CLOCK_INTENSET_CTTO_Pos (4UL) /*!< Position of CTTO field. */ +#define CLOCK_INTENSET_CTTO_Msk (0x1UL << CLOCK_INTENSET_CTTO_Pos) /*!< Bit mask of CTTO field. */ +#define CLOCK_INTENSET_CTTO_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENSET_CTTO_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENSET_CTTO_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 3 : Enable interrupt on DONE event. */ +#define CLOCK_INTENSET_DONE_Pos (3UL) /*!< Position of DONE field. */ +#define CLOCK_INTENSET_DONE_Msk (0x1UL << CLOCK_INTENSET_DONE_Pos) /*!< Bit mask of DONE field. */ +#define CLOCK_INTENSET_DONE_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENSET_DONE_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENSET_DONE_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on LFCLKSTARTED event. */ +#define CLOCK_INTENSET_LFCLKSTARTED_Pos (1UL) /*!< Position of LFCLKSTARTED field. */ +#define CLOCK_INTENSET_LFCLKSTARTED_Msk (0x1UL << CLOCK_INTENSET_LFCLKSTARTED_Pos) /*!< Bit mask of LFCLKSTARTED field. */ +#define CLOCK_INTENSET_LFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENSET_LFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENSET_LFCLKSTARTED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on HFCLKSTARTED event. */ +#define CLOCK_INTENSET_HFCLKSTARTED_Pos (0UL) /*!< Position of HFCLKSTARTED field. */ +#define CLOCK_INTENSET_HFCLKSTARTED_Msk (0x1UL << CLOCK_INTENSET_HFCLKSTARTED_Pos) /*!< Bit mask of HFCLKSTARTED field. */ +#define CLOCK_INTENSET_HFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENSET_HFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENSET_HFCLKSTARTED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: CLOCK_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 4 : Disable interrupt on CTTO event. */ +#define CLOCK_INTENCLR_CTTO_Pos (4UL) /*!< Position of CTTO field. */ +#define CLOCK_INTENCLR_CTTO_Msk (0x1UL << CLOCK_INTENCLR_CTTO_Pos) /*!< Bit mask of CTTO field. */ +#define CLOCK_INTENCLR_CTTO_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENCLR_CTTO_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENCLR_CTTO_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 3 : Disable interrupt on DONE event. */ +#define CLOCK_INTENCLR_DONE_Pos (3UL) /*!< Position of DONE field. */ +#define CLOCK_INTENCLR_DONE_Msk (0x1UL << CLOCK_INTENCLR_DONE_Pos) /*!< Bit mask of DONE field. */ +#define CLOCK_INTENCLR_DONE_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENCLR_DONE_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENCLR_DONE_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on LFCLKSTARTED event. */ +#define CLOCK_INTENCLR_LFCLKSTARTED_Pos (1UL) /*!< Position of LFCLKSTARTED field. */ +#define CLOCK_INTENCLR_LFCLKSTARTED_Msk (0x1UL << CLOCK_INTENCLR_LFCLKSTARTED_Pos) /*!< Bit mask of LFCLKSTARTED field. */ +#define CLOCK_INTENCLR_LFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENCLR_LFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENCLR_LFCLKSTARTED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on HFCLKSTARTED event. */ +#define CLOCK_INTENCLR_HFCLKSTARTED_Pos (0UL) /*!< Position of HFCLKSTARTED field. */ +#define CLOCK_INTENCLR_HFCLKSTARTED_Msk (0x1UL << CLOCK_INTENCLR_HFCLKSTARTED_Pos) /*!< Bit mask of HFCLKSTARTED field. */ +#define CLOCK_INTENCLR_HFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENCLR_HFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENCLR_HFCLKSTARTED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: CLOCK_HFCLKRUN */ +/* Description: Task HFCLKSTART trigger status. */ + +/* Bit 0 : Task HFCLKSTART trigger status. */ +#define CLOCK_HFCLKRUN_STATUS_Pos (0UL) /*!< Position of STATUS field. */ +#define CLOCK_HFCLKRUN_STATUS_Msk (0x1UL << CLOCK_HFCLKRUN_STATUS_Pos) /*!< Bit mask of STATUS field. */ +#define CLOCK_HFCLKRUN_STATUS_NotTriggered (0UL) /*!< Task HFCLKSTART has not been triggered. */ +#define CLOCK_HFCLKRUN_STATUS_Triggered (1UL) /*!< Task HFCLKSTART has been triggered. */ + +/* Register: CLOCK_HFCLKSTAT */ +/* Description: High frequency clock status. */ + +/* Bit 16 : State for the HFCLK. */ +#define CLOCK_HFCLKSTAT_STATE_Pos (16UL) /*!< Position of STATE field. */ +#define CLOCK_HFCLKSTAT_STATE_Msk (0x1UL << CLOCK_HFCLKSTAT_STATE_Pos) /*!< Bit mask of STATE field. */ +#define CLOCK_HFCLKSTAT_STATE_NotRunning (0UL) /*!< HFCLK clock not running. */ +#define CLOCK_HFCLKSTAT_STATE_Running (1UL) /*!< HFCLK clock running. */ + +/* Bit 0 : Active clock source for the HF clock. */ +#define CLOCK_HFCLKSTAT_SRC_Pos (0UL) /*!< Position of SRC field. */ +#define CLOCK_HFCLKSTAT_SRC_Msk (0x1UL << CLOCK_HFCLKSTAT_SRC_Pos) /*!< Bit mask of SRC field. */ +#define CLOCK_HFCLKSTAT_SRC_RC (0UL) /*!< Internal 16MHz RC oscillator running and generating the HFCLK clock. */ +#define CLOCK_HFCLKSTAT_SRC_Xtal (1UL) /*!< External 16MHz/32MHz crystal oscillator running and generating the HFCLK clock. */ + +/* Register: CLOCK_LFCLKRUN */ +/* Description: Task LFCLKSTART triggered status. */ + +/* Bit 0 : Task LFCLKSTART triggered status. */ +#define CLOCK_LFCLKRUN_STATUS_Pos (0UL) /*!< Position of STATUS field. */ +#define CLOCK_LFCLKRUN_STATUS_Msk (0x1UL << CLOCK_LFCLKRUN_STATUS_Pos) /*!< Bit mask of STATUS field. */ +#define CLOCK_LFCLKRUN_STATUS_NotTriggered (0UL) /*!< Task LFCLKSTART has not been triggered. */ +#define CLOCK_LFCLKRUN_STATUS_Triggered (1UL) /*!< Task LFCLKSTART has been triggered. */ + +/* Register: CLOCK_LFCLKSTAT */ +/* Description: Low frequency clock status. */ + +/* Bit 16 : State for the LF clock. */ +#define CLOCK_LFCLKSTAT_STATE_Pos (16UL) /*!< Position of STATE field. */ +#define CLOCK_LFCLKSTAT_STATE_Msk (0x1UL << CLOCK_LFCLKSTAT_STATE_Pos) /*!< Bit mask of STATE field. */ +#define CLOCK_LFCLKSTAT_STATE_NotRunning (0UL) /*!< LFCLK clock not running. */ +#define CLOCK_LFCLKSTAT_STATE_Running (1UL) /*!< LFCLK clock running. */ + +/* Bits 1..0 : Active clock source for the LF clock. */ +#define CLOCK_LFCLKSTAT_SRC_Pos (0UL) /*!< Position of SRC field. */ +#define CLOCK_LFCLKSTAT_SRC_Msk (0x3UL << CLOCK_LFCLKSTAT_SRC_Pos) /*!< Bit mask of SRC field. */ +#define CLOCK_LFCLKSTAT_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator running and generating the LFCLK clock. */ +#define CLOCK_LFCLKSTAT_SRC_Xtal (1UL) /*!< External 32KiHz crystal oscillator running and generating the LFCLK clock. */ +#define CLOCK_LFCLKSTAT_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from the HFCLK running and generating the LFCLK clock. */ + +/* Register: CLOCK_LFCLKSRCCOPY */ +/* Description: Clock source for the LFCLK clock, set when task LKCLKSTART is triggered. */ + +/* Bits 1..0 : Clock source for the LFCLK clock, set when task LKCLKSTART is triggered. */ +#define CLOCK_LFCLKSRCCOPY_SRC_Pos (0UL) /*!< Position of SRC field. */ +#define CLOCK_LFCLKSRCCOPY_SRC_Msk (0x3UL << CLOCK_LFCLKSRCCOPY_SRC_Pos) /*!< Bit mask of SRC field. */ +#define CLOCK_LFCLKSRCCOPY_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator. */ +#define CLOCK_LFCLKSRCCOPY_SRC_Xtal (1UL) /*!< External 32KiHz crystal. */ +#define CLOCK_LFCLKSRCCOPY_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from HFCLK system clock. */ + +/* Register: CLOCK_LFCLKSRC */ +/* Description: Clock source for the LFCLK clock. */ + +/* Bits 1..0 : Clock source. */ +#define CLOCK_LFCLKSRC_SRC_Pos (0UL) /*!< Position of SRC field. */ +#define CLOCK_LFCLKSRC_SRC_Msk (0x3UL << CLOCK_LFCLKSRC_SRC_Pos) /*!< Bit mask of SRC field. */ +#define CLOCK_LFCLKSRC_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator. */ +#define CLOCK_LFCLKSRC_SRC_Xtal (1UL) /*!< External 32KiHz crystal. */ +#define CLOCK_LFCLKSRC_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from HFCLK system clock. */ + +/* Register: CLOCK_CTIV */ +/* Description: Calibration timer interval. */ + +/* Bits 6..0 : Calibration timer interval in 0.25s resolution. */ +#define CLOCK_CTIV_CTIV_Pos (0UL) /*!< Position of CTIV field. */ +#define CLOCK_CTIV_CTIV_Msk (0x7FUL << CLOCK_CTIV_CTIV_Pos) /*!< Bit mask of CTIV field. */ + +/* Register: CLOCK_XTALFREQ */ +/* Description: Crystal frequency. */ + +/* Bits 7..0 : External Xtal frequency selection. */ +#define CLOCK_XTALFREQ_XTALFREQ_Pos (0UL) /*!< Position of XTALFREQ field. */ +#define CLOCK_XTALFREQ_XTALFREQ_Msk (0xFFUL << CLOCK_XTALFREQ_XTALFREQ_Pos) /*!< Bit mask of XTALFREQ field. */ +#define CLOCK_XTALFREQ_XTALFREQ_16MHz (0xFFUL) /*!< 16MHz xtal is used as source for the HFCLK oscillator. */ +#define CLOCK_XTALFREQ_XTALFREQ_32MHz (0x00UL) /*!< 32MHz xtal is used as source for the HFCLK oscillator. */ + + +/* Peripheral: ECB */ +/* Description: AES ECB Mode Encryption. */ + +/* Register: ECB_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 1 : Enable interrupt on ERRORECB event. */ +#define ECB_INTENSET_ERRORECB_Pos (1UL) /*!< Position of ERRORECB field. */ +#define ECB_INTENSET_ERRORECB_Msk (0x1UL << ECB_INTENSET_ERRORECB_Pos) /*!< Bit mask of ERRORECB field. */ +#define ECB_INTENSET_ERRORECB_Disabled (0UL) /*!< Interrupt disabled. */ +#define ECB_INTENSET_ERRORECB_Enabled (1UL) /*!< Interrupt enabled. */ +#define ECB_INTENSET_ERRORECB_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on ENDECB event. */ +#define ECB_INTENSET_ENDECB_Pos (0UL) /*!< Position of ENDECB field. */ +#define ECB_INTENSET_ENDECB_Msk (0x1UL << ECB_INTENSET_ENDECB_Pos) /*!< Bit mask of ENDECB field. */ +#define ECB_INTENSET_ENDECB_Disabled (0UL) /*!< Interrupt disabled. */ +#define ECB_INTENSET_ENDECB_Enabled (1UL) /*!< Interrupt enabled. */ +#define ECB_INTENSET_ENDECB_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: ECB_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 1 : Disable interrupt on ERRORECB event. */ +#define ECB_INTENCLR_ERRORECB_Pos (1UL) /*!< Position of ERRORECB field. */ +#define ECB_INTENCLR_ERRORECB_Msk (0x1UL << ECB_INTENCLR_ERRORECB_Pos) /*!< Bit mask of ERRORECB field. */ +#define ECB_INTENCLR_ERRORECB_Disabled (0UL) /*!< Interrupt disabled. */ +#define ECB_INTENCLR_ERRORECB_Enabled (1UL) /*!< Interrupt enabled. */ +#define ECB_INTENCLR_ERRORECB_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on ENDECB event. */ +#define ECB_INTENCLR_ENDECB_Pos (0UL) /*!< Position of ENDECB field. */ +#define ECB_INTENCLR_ENDECB_Msk (0x1UL << ECB_INTENCLR_ENDECB_Pos) /*!< Bit mask of ENDECB field. */ +#define ECB_INTENCLR_ENDECB_Disabled (0UL) /*!< Interrupt disabled. */ +#define ECB_INTENCLR_ENDECB_Enabled (1UL) /*!< Interrupt enabled. */ +#define ECB_INTENCLR_ENDECB_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: ECB_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define ECB_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define ECB_POWER_POWER_Msk (0x1UL << ECB_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define ECB_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define ECB_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: FICR */ +/* Description: Factory Information Configuration. */ + +/* Register: FICR_PPFC */ +/* Description: Pre-programmed factory code present. */ + +/* Bits 7..0 : Pre-programmed factory code present. */ +#define FICR_PPFC_PPFC_Pos (0UL) /*!< Position of PPFC field. */ +#define FICR_PPFC_PPFC_Msk (0xFFUL << FICR_PPFC_PPFC_Pos) /*!< Bit mask of PPFC field. */ +#define FICR_PPFC_PPFC_NotPresent (0xFFUL) /*!< Not present. */ +#define FICR_PPFC_PPFC_Present (0x00UL) /*!< Present. */ + +/* Register: FICR_CONFIGID */ +/* Description: Configuration identifier. */ + +/* Bits 31..16 : Firmware Identification Number pre-loaded into the flash. */ +#define FICR_CONFIGID_FWID_Pos (16UL) /*!< Position of FWID field. */ +#define FICR_CONFIGID_FWID_Msk (0xFFFFUL << FICR_CONFIGID_FWID_Pos) /*!< Bit mask of FWID field. */ + +/* Bits 15..0 : Hardware Identification Number. */ +#define FICR_CONFIGID_HWID_Pos (0UL) /*!< Position of HWID field. */ +#define FICR_CONFIGID_HWID_Msk (0xFFFFUL << FICR_CONFIGID_HWID_Pos) /*!< Bit mask of HWID field. */ + +/* Register: FICR_DEVICEADDRTYPE */ +/* Description: Device address type. */ + +/* Bit 0 : Device address type. */ +#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Pos (0UL) /*!< Position of DEVICEADDRTYPE field. */ +#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Msk (0x1UL << FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Pos) /*!< Bit mask of DEVICEADDRTYPE field. */ +#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Public (0UL) /*!< Public address. */ +#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Random (1UL) /*!< Random address. */ + +/* Register: FICR_OVERRIDEEN */ +/* Description: Radio calibration override enable. */ + +/* Bit 3 : Override default values for BLE_1Mbit mode. */ +#define FICR_OVERRIDEEN_BLE_1MBIT_Pos (3UL) /*!< Position of BLE_1MBIT field. */ +#define FICR_OVERRIDEEN_BLE_1MBIT_Msk (0x1UL << FICR_OVERRIDEEN_BLE_1MBIT_Pos) /*!< Bit mask of BLE_1MBIT field. */ +#define FICR_OVERRIDEEN_BLE_1MBIT_Override (0UL) /*!< Override the default values for BLE_1Mbit mode. */ +#define FICR_OVERRIDEEN_BLE_1MBIT_NotOverride (1UL) /*!< Do not override the default values for BLE_1Mbit mode. */ + +/* Bit 0 : Override default values for NRF_1Mbit mode. */ +#define FICR_OVERRIDEEN_NRF_1MBIT_Pos (0UL) /*!< Position of NRF_1MBIT field. */ +#define FICR_OVERRIDEEN_NRF_1MBIT_Msk (0x1UL << FICR_OVERRIDEEN_NRF_1MBIT_Pos) /*!< Bit mask of NRF_1MBIT field. */ +#define FICR_OVERRIDEEN_NRF_1MBIT_Override (0UL) /*!< Override the default values for NRF_1Mbit mode. */ +#define FICR_OVERRIDEEN_NRF_1MBIT_NotOverride (1UL) /*!< Do not override the default values for NRF_1Mbit mode. */ + +/* Register: FICR_INFO_PART */ +/* Description: Part code */ + +/* Bits 31..0 : Part code */ +#define FICR_INFO_PART_PART_Pos (0UL) /*!< Position of PART field. */ +#define FICR_INFO_PART_PART_Msk (0xFFFFFFFFUL << FICR_INFO_PART_PART_Pos) /*!< Bit mask of PART field. */ +#define FICR_INFO_PART_PART_N51822 (0x51822UL) /*!< nRF51822 */ +#define FICR_INFO_PART_PART_N51422 (0x51422UL) /*!< nRF51422 */ +#define FICR_INFO_PART_PART_Unspecified (0xFFFFFFFFUL) /*!< Unspecified */ + +/* Register: FICR_INFO_VARIANT */ +/* Description: Part variant */ + +/* Bits 31..0 : Part variant */ +#define FICR_INFO_VARIANT_VARIANT_Pos (0UL) /*!< Position of VARIANT field. */ +#define FICR_INFO_VARIANT_VARIANT_Msk (0xFFFFFFFFUL << FICR_INFO_VARIANT_VARIANT_Pos) /*!< Bit mask of VARIANT field. */ +#define FICR_INFO_VARIANT_VARIANT_nRF51C (0x1002UL) /*!< nRF51-C (XLR3) */ +#define FICR_INFO_VARIANT_VARIANT_nRF51D (0x1003UL) /*!< nRF51-D (L3) */ +#define FICR_INFO_VARIANT_VARIANT_nRF51E (0x1004UL) /*!< nRF51-E (XLR3P) */ +#define FICR_INFO_VARIANT_VARIANT_Unspecified (0xFFFFFFFFUL) /*!< Unspecified */ + +/* Register: FICR_INFO_PACKAGE */ +/* Description: Package option */ + +/* Bits 31..0 : Package option */ +#define FICR_INFO_PACKAGE_PACKAGE_Pos (0UL) /*!< Position of PACKAGE field. */ +#define FICR_INFO_PACKAGE_PACKAGE_Msk (0xFFFFFFFFUL << FICR_INFO_PACKAGE_PACKAGE_Pos) /*!< Bit mask of PACKAGE field. */ +#define FICR_INFO_PACKAGE_PACKAGE_QFN48 (0x0000UL) /*!< 48-pin QFN with 31 GPIO */ +#define FICR_INFO_PACKAGE_PACKAGE_nRF51CSP56A (0x1000UL) /*!< nRF51x22 CDxx - WLCSP 56 balls */ +#define FICR_INFO_PACKAGE_PACKAGE_nRF51CSP62A (0x1001UL) /*!< nRF51x22 CExx - WLCSP 62 balls */ +#define FICR_INFO_PACKAGE_PACKAGE_nRF51CSP62B (0x1002UL) /*!< nRF51x22 CFxx - WLCSP 62 balls */ +#define FICR_INFO_PACKAGE_PACKAGE_nRF51CSP62C (0x1003UL) /*!< nRF51x22 CTxx - WLCSP 62 balls */ +#define FICR_INFO_PACKAGE_PACKAGE_Unspecified (0xFFFFFFFFUL) /*!< Unspecified */ + +/* Register: FICR_INFO_RAM */ +/* Description: RAM variant */ + +/* Bits 31..0 : RAM variant */ +#define FICR_INFO_RAM_RAM_Pos (0UL) /*!< Position of RAM field. */ +#define FICR_INFO_RAM_RAM_Msk (0xFFFFFFFFUL << FICR_INFO_RAM_RAM_Pos) /*!< Bit mask of RAM field. */ +#define FICR_INFO_RAM_RAM_Unspecified (0xFFFFFFFFUL) /*!< Unspecified */ +#define FICR_INFO_RAM_RAM_K16 (16UL) /*!< 16 kByte RAM. */ +#define FICR_INFO_RAM_RAM_K32 (32UL) /*!< 32 kByte RAM. */ + +/* Register: FICR_INFO_FLASH */ +/* Description: Flash variant */ + +/* Bits 31..0 : Flash variant */ +#define FICR_INFO_FLASH_FLASH_Pos (0UL) /*!< Position of FLASH field. */ +#define FICR_INFO_FLASH_FLASH_Msk (0xFFFFFFFFUL << FICR_INFO_FLASH_FLASH_Pos) /*!< Bit mask of FLASH field. */ +#define FICR_INFO_FLASH_FLASH_Unspecified (0xFFFFFFFFUL) /*!< Unspecified */ +#define FICR_INFO_FLASH_FLASH_K128 (128UL) /*!< 128 kByte FLASH. */ +#define FICR_INFO_FLASH_FLASH_K256 (256UL) /*!< 256 kByte FLASH. */ + + +/* Peripheral: GPIO */ +/* Description: General purpose input and output. */ + +/* Register: GPIO_OUT */ +/* Description: Write GPIO port. */ + +/* Bit 31 : Pin 31. */ +#define GPIO_OUT_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_OUT_PIN31_Msk (0x1UL << GPIO_OUT_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_OUT_PIN31_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN31_High (1UL) /*!< Pin driver is high. */ + +/* Bit 30 : Pin 30. */ +#define GPIO_OUT_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_OUT_PIN30_Msk (0x1UL << GPIO_OUT_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_OUT_PIN30_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN30_High (1UL) /*!< Pin driver is high. */ + +/* Bit 29 : Pin 29. */ +#define GPIO_OUT_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_OUT_PIN29_Msk (0x1UL << GPIO_OUT_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_OUT_PIN29_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN29_High (1UL) /*!< Pin driver is high. */ + +/* Bit 28 : Pin 28. */ +#define GPIO_OUT_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_OUT_PIN28_Msk (0x1UL << GPIO_OUT_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_OUT_PIN28_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN28_High (1UL) /*!< Pin driver is high. */ + +/* Bit 27 : Pin 27. */ +#define GPIO_OUT_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_OUT_PIN27_Msk (0x1UL << GPIO_OUT_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_OUT_PIN27_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN27_High (1UL) /*!< Pin driver is high. */ + +/* Bit 26 : Pin 26. */ +#define GPIO_OUT_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_OUT_PIN26_Msk (0x1UL << GPIO_OUT_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_OUT_PIN26_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN26_High (1UL) /*!< Pin driver is high. */ + +/* Bit 25 : Pin 25. */ +#define GPIO_OUT_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_OUT_PIN25_Msk (0x1UL << GPIO_OUT_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_OUT_PIN25_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN25_High (1UL) /*!< Pin driver is high. */ + +/* Bit 24 : Pin 24. */ +#define GPIO_OUT_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_OUT_PIN24_Msk (0x1UL << GPIO_OUT_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_OUT_PIN24_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN24_High (1UL) /*!< Pin driver is high. */ + +/* Bit 23 : Pin 23. */ +#define GPIO_OUT_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_OUT_PIN23_Msk (0x1UL << GPIO_OUT_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_OUT_PIN23_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN23_High (1UL) /*!< Pin driver is high. */ + +/* Bit 22 : Pin 22. */ +#define GPIO_OUT_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_OUT_PIN22_Msk (0x1UL << GPIO_OUT_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_OUT_PIN22_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN22_High (1UL) /*!< Pin driver is high. */ + +/* Bit 21 : Pin 21. */ +#define GPIO_OUT_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_OUT_PIN21_Msk (0x1UL << GPIO_OUT_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_OUT_PIN21_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN21_High (1UL) /*!< Pin driver is high. */ + +/* Bit 20 : Pin 20. */ +#define GPIO_OUT_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_OUT_PIN20_Msk (0x1UL << GPIO_OUT_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_OUT_PIN20_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN20_High (1UL) /*!< Pin driver is high. */ + +/* Bit 19 : Pin 19. */ +#define GPIO_OUT_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_OUT_PIN19_Msk (0x1UL << GPIO_OUT_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_OUT_PIN19_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN19_High (1UL) /*!< Pin driver is high. */ + +/* Bit 18 : Pin 18. */ +#define GPIO_OUT_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_OUT_PIN18_Msk (0x1UL << GPIO_OUT_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_OUT_PIN18_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN18_High (1UL) /*!< Pin driver is high. */ + +/* Bit 17 : Pin 17. */ +#define GPIO_OUT_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_OUT_PIN17_Msk (0x1UL << GPIO_OUT_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_OUT_PIN17_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN17_High (1UL) /*!< Pin driver is high. */ + +/* Bit 16 : Pin 16. */ +#define GPIO_OUT_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_OUT_PIN16_Msk (0x1UL << GPIO_OUT_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_OUT_PIN16_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN16_High (1UL) /*!< Pin driver is high. */ + +/* Bit 15 : Pin 15. */ +#define GPIO_OUT_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_OUT_PIN15_Msk (0x1UL << GPIO_OUT_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_OUT_PIN15_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN15_High (1UL) /*!< Pin driver is high. */ + +/* Bit 14 : Pin 14. */ +#define GPIO_OUT_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_OUT_PIN14_Msk (0x1UL << GPIO_OUT_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_OUT_PIN14_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN14_High (1UL) /*!< Pin driver is high. */ + +/* Bit 13 : Pin 13. */ +#define GPIO_OUT_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_OUT_PIN13_Msk (0x1UL << GPIO_OUT_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_OUT_PIN13_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN13_High (1UL) /*!< Pin driver is high. */ + +/* Bit 12 : Pin 12. */ +#define GPIO_OUT_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_OUT_PIN12_Msk (0x1UL << GPIO_OUT_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_OUT_PIN12_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN12_High (1UL) /*!< Pin driver is high. */ + +/* Bit 11 : Pin 11. */ +#define GPIO_OUT_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_OUT_PIN11_Msk (0x1UL << GPIO_OUT_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_OUT_PIN11_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN11_High (1UL) /*!< Pin driver is high. */ + +/* Bit 10 : Pin 10. */ +#define GPIO_OUT_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_OUT_PIN10_Msk (0x1UL << GPIO_OUT_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_OUT_PIN10_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN10_High (1UL) /*!< Pin driver is high. */ + +/* Bit 9 : Pin 9. */ +#define GPIO_OUT_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_OUT_PIN9_Msk (0x1UL << GPIO_OUT_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_OUT_PIN9_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN9_High (1UL) /*!< Pin driver is high. */ + +/* Bit 8 : Pin 8. */ +#define GPIO_OUT_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_OUT_PIN8_Msk (0x1UL << GPIO_OUT_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_OUT_PIN8_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN8_High (1UL) /*!< Pin driver is high. */ + +/* Bit 7 : Pin 7. */ +#define GPIO_OUT_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_OUT_PIN7_Msk (0x1UL << GPIO_OUT_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_OUT_PIN7_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN7_High (1UL) /*!< Pin driver is high. */ + +/* Bit 6 : Pin 6. */ +#define GPIO_OUT_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_OUT_PIN6_Msk (0x1UL << GPIO_OUT_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_OUT_PIN6_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN6_High (1UL) /*!< Pin driver is high. */ + +/* Bit 5 : Pin 5. */ +#define GPIO_OUT_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_OUT_PIN5_Msk (0x1UL << GPIO_OUT_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_OUT_PIN5_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN5_High (1UL) /*!< Pin driver is high. */ + +/* Bit 4 : Pin 4. */ +#define GPIO_OUT_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_OUT_PIN4_Msk (0x1UL << GPIO_OUT_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_OUT_PIN4_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN4_High (1UL) /*!< Pin driver is high. */ + +/* Bit 3 : Pin 3. */ +#define GPIO_OUT_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_OUT_PIN3_Msk (0x1UL << GPIO_OUT_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_OUT_PIN3_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN3_High (1UL) /*!< Pin driver is high. */ + +/* Bit 2 : Pin 2. */ +#define GPIO_OUT_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_OUT_PIN2_Msk (0x1UL << GPIO_OUT_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_OUT_PIN2_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN2_High (1UL) /*!< Pin driver is high. */ + +/* Bit 1 : Pin 1. */ +#define GPIO_OUT_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_OUT_PIN1_Msk (0x1UL << GPIO_OUT_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_OUT_PIN1_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN1_High (1UL) /*!< Pin driver is high. */ + +/* Bit 0 : Pin 0. */ +#define GPIO_OUT_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_OUT_PIN0_Msk (0x1UL << GPIO_OUT_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_OUT_PIN0_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN0_High (1UL) /*!< Pin driver is high. */ + +/* Register: GPIO_OUTSET */ +/* Description: Set individual bits in GPIO port. */ + +/* Bit 31 : Pin 31. */ +#define GPIO_OUTSET_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_OUTSET_PIN31_Msk (0x1UL << GPIO_OUTSET_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_OUTSET_PIN31_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN31_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN31_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 30 : Pin 30. */ +#define GPIO_OUTSET_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_OUTSET_PIN30_Msk (0x1UL << GPIO_OUTSET_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_OUTSET_PIN30_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN30_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN30_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 29 : Pin 29. */ +#define GPIO_OUTSET_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_OUTSET_PIN29_Msk (0x1UL << GPIO_OUTSET_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_OUTSET_PIN29_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN29_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN29_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 28 : Pin 28. */ +#define GPIO_OUTSET_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_OUTSET_PIN28_Msk (0x1UL << GPIO_OUTSET_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_OUTSET_PIN28_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN28_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN28_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 27 : Pin 27. */ +#define GPIO_OUTSET_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_OUTSET_PIN27_Msk (0x1UL << GPIO_OUTSET_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_OUTSET_PIN27_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN27_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN27_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 26 : Pin 26. */ +#define GPIO_OUTSET_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_OUTSET_PIN26_Msk (0x1UL << GPIO_OUTSET_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_OUTSET_PIN26_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN26_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN26_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 25 : Pin 25. */ +#define GPIO_OUTSET_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_OUTSET_PIN25_Msk (0x1UL << GPIO_OUTSET_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_OUTSET_PIN25_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN25_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN25_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 24 : Pin 24. */ +#define GPIO_OUTSET_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_OUTSET_PIN24_Msk (0x1UL << GPIO_OUTSET_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_OUTSET_PIN24_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN24_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN24_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 23 : Pin 23. */ +#define GPIO_OUTSET_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_OUTSET_PIN23_Msk (0x1UL << GPIO_OUTSET_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_OUTSET_PIN23_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN23_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN23_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 22 : Pin 22. */ +#define GPIO_OUTSET_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_OUTSET_PIN22_Msk (0x1UL << GPIO_OUTSET_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_OUTSET_PIN22_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN22_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN22_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 21 : Pin 21. */ +#define GPIO_OUTSET_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_OUTSET_PIN21_Msk (0x1UL << GPIO_OUTSET_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_OUTSET_PIN21_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN21_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN21_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 20 : Pin 20. */ +#define GPIO_OUTSET_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_OUTSET_PIN20_Msk (0x1UL << GPIO_OUTSET_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_OUTSET_PIN20_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN20_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN20_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 19 : Pin 19. */ +#define GPIO_OUTSET_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_OUTSET_PIN19_Msk (0x1UL << GPIO_OUTSET_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_OUTSET_PIN19_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN19_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN19_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 18 : Pin 18. */ +#define GPIO_OUTSET_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_OUTSET_PIN18_Msk (0x1UL << GPIO_OUTSET_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_OUTSET_PIN18_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN18_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN18_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 17 : Pin 17. */ +#define GPIO_OUTSET_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_OUTSET_PIN17_Msk (0x1UL << GPIO_OUTSET_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_OUTSET_PIN17_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN17_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN17_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 16 : Pin 16. */ +#define GPIO_OUTSET_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_OUTSET_PIN16_Msk (0x1UL << GPIO_OUTSET_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_OUTSET_PIN16_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN16_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN16_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 15 : Pin 15. */ +#define GPIO_OUTSET_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_OUTSET_PIN15_Msk (0x1UL << GPIO_OUTSET_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_OUTSET_PIN15_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN15_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN15_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 14 : Pin 14. */ +#define GPIO_OUTSET_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_OUTSET_PIN14_Msk (0x1UL << GPIO_OUTSET_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_OUTSET_PIN14_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN14_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN14_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 13 : Pin 13. */ +#define GPIO_OUTSET_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_OUTSET_PIN13_Msk (0x1UL << GPIO_OUTSET_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_OUTSET_PIN13_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN13_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN13_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 12 : Pin 12. */ +#define GPIO_OUTSET_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_OUTSET_PIN12_Msk (0x1UL << GPIO_OUTSET_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_OUTSET_PIN12_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN12_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN12_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 11 : Pin 11. */ +#define GPIO_OUTSET_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_OUTSET_PIN11_Msk (0x1UL << GPIO_OUTSET_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_OUTSET_PIN11_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN11_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN11_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 10 : Pin 10. */ +#define GPIO_OUTSET_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_OUTSET_PIN10_Msk (0x1UL << GPIO_OUTSET_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_OUTSET_PIN10_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN10_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN10_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 9 : Pin 9. */ +#define GPIO_OUTSET_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_OUTSET_PIN9_Msk (0x1UL << GPIO_OUTSET_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_OUTSET_PIN9_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN9_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN9_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 8 : Pin 8. */ +#define GPIO_OUTSET_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_OUTSET_PIN8_Msk (0x1UL << GPIO_OUTSET_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_OUTSET_PIN8_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN8_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN8_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 7 : Pin 7. */ +#define GPIO_OUTSET_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_OUTSET_PIN7_Msk (0x1UL << GPIO_OUTSET_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_OUTSET_PIN7_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN7_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN7_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 6 : Pin 6. */ +#define GPIO_OUTSET_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_OUTSET_PIN6_Msk (0x1UL << GPIO_OUTSET_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_OUTSET_PIN6_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN6_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN6_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 5 : Pin 5. */ +#define GPIO_OUTSET_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_OUTSET_PIN5_Msk (0x1UL << GPIO_OUTSET_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_OUTSET_PIN5_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN5_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN5_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 4 : Pin 4. */ +#define GPIO_OUTSET_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_OUTSET_PIN4_Msk (0x1UL << GPIO_OUTSET_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_OUTSET_PIN4_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN4_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN4_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 3 : Pin 3. */ +#define GPIO_OUTSET_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_OUTSET_PIN3_Msk (0x1UL << GPIO_OUTSET_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_OUTSET_PIN3_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN3_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN3_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 2 : Pin 2. */ +#define GPIO_OUTSET_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_OUTSET_PIN2_Msk (0x1UL << GPIO_OUTSET_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_OUTSET_PIN2_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN2_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN2_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 1 : Pin 1. */ +#define GPIO_OUTSET_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_OUTSET_PIN1_Msk (0x1UL << GPIO_OUTSET_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_OUTSET_PIN1_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN1_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN1_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 0 : Pin 0. */ +#define GPIO_OUTSET_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_OUTSET_PIN0_Msk (0x1UL << GPIO_OUTSET_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_OUTSET_PIN0_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN0_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN0_Set (1UL) /*!< Set pin driver high. */ + +/* Register: GPIO_OUTCLR */ +/* Description: Clear individual bits in GPIO port. */ + +/* Bit 31 : Pin 31. */ +#define GPIO_OUTCLR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_OUTCLR_PIN31_Msk (0x1UL << GPIO_OUTCLR_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_OUTCLR_PIN31_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN31_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN31_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 30 : Pin 30. */ +#define GPIO_OUTCLR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_OUTCLR_PIN30_Msk (0x1UL << GPIO_OUTCLR_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_OUTCLR_PIN30_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN30_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN30_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 29 : Pin 29. */ +#define GPIO_OUTCLR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_OUTCLR_PIN29_Msk (0x1UL << GPIO_OUTCLR_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_OUTCLR_PIN29_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN29_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN29_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 28 : Pin 28. */ +#define GPIO_OUTCLR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_OUTCLR_PIN28_Msk (0x1UL << GPIO_OUTCLR_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_OUTCLR_PIN28_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN28_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN28_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 27 : Pin 27. */ +#define GPIO_OUTCLR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_OUTCLR_PIN27_Msk (0x1UL << GPIO_OUTCLR_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_OUTCLR_PIN27_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN27_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN27_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 26 : Pin 26. */ +#define GPIO_OUTCLR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_OUTCLR_PIN26_Msk (0x1UL << GPIO_OUTCLR_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_OUTCLR_PIN26_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN26_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN26_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 25 : Pin 25. */ +#define GPIO_OUTCLR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_OUTCLR_PIN25_Msk (0x1UL << GPIO_OUTCLR_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_OUTCLR_PIN25_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN25_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN25_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 24 : Pin 24. */ +#define GPIO_OUTCLR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_OUTCLR_PIN24_Msk (0x1UL << GPIO_OUTCLR_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_OUTCLR_PIN24_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN24_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN24_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 23 : Pin 23. */ +#define GPIO_OUTCLR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_OUTCLR_PIN23_Msk (0x1UL << GPIO_OUTCLR_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_OUTCLR_PIN23_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN23_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN23_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 22 : Pin 22. */ +#define GPIO_OUTCLR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_OUTCLR_PIN22_Msk (0x1UL << GPIO_OUTCLR_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_OUTCLR_PIN22_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN22_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN22_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 21 : Pin 21. */ +#define GPIO_OUTCLR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_OUTCLR_PIN21_Msk (0x1UL << GPIO_OUTCLR_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_OUTCLR_PIN21_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN21_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN21_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 20 : Pin 20. */ +#define GPIO_OUTCLR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_OUTCLR_PIN20_Msk (0x1UL << GPIO_OUTCLR_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_OUTCLR_PIN20_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN20_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN20_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 19 : Pin 19. */ +#define GPIO_OUTCLR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_OUTCLR_PIN19_Msk (0x1UL << GPIO_OUTCLR_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_OUTCLR_PIN19_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN19_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN19_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 18 : Pin 18. */ +#define GPIO_OUTCLR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_OUTCLR_PIN18_Msk (0x1UL << GPIO_OUTCLR_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_OUTCLR_PIN18_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN18_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN18_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 17 : Pin 17. */ +#define GPIO_OUTCLR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_OUTCLR_PIN17_Msk (0x1UL << GPIO_OUTCLR_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_OUTCLR_PIN17_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN17_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN17_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 16 : Pin 16. */ +#define GPIO_OUTCLR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_OUTCLR_PIN16_Msk (0x1UL << GPIO_OUTCLR_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_OUTCLR_PIN16_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN16_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN16_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 15 : Pin 15. */ +#define GPIO_OUTCLR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_OUTCLR_PIN15_Msk (0x1UL << GPIO_OUTCLR_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_OUTCLR_PIN15_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN15_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN15_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 14 : Pin 14. */ +#define GPIO_OUTCLR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_OUTCLR_PIN14_Msk (0x1UL << GPIO_OUTCLR_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_OUTCLR_PIN14_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN14_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN14_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 13 : Pin 13. */ +#define GPIO_OUTCLR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_OUTCLR_PIN13_Msk (0x1UL << GPIO_OUTCLR_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_OUTCLR_PIN13_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN13_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN13_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 12 : Pin 12. */ +#define GPIO_OUTCLR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_OUTCLR_PIN12_Msk (0x1UL << GPIO_OUTCLR_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_OUTCLR_PIN12_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN12_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN12_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 11 : Pin 11. */ +#define GPIO_OUTCLR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_OUTCLR_PIN11_Msk (0x1UL << GPIO_OUTCLR_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_OUTCLR_PIN11_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN11_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN11_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 10 : Pin 10. */ +#define GPIO_OUTCLR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_OUTCLR_PIN10_Msk (0x1UL << GPIO_OUTCLR_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_OUTCLR_PIN10_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN10_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN10_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 9 : Pin 9. */ +#define GPIO_OUTCLR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_OUTCLR_PIN9_Msk (0x1UL << GPIO_OUTCLR_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_OUTCLR_PIN9_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN9_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN9_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 8 : Pin 8. */ +#define GPIO_OUTCLR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_OUTCLR_PIN8_Msk (0x1UL << GPIO_OUTCLR_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_OUTCLR_PIN8_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN8_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN8_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 7 : Pin 7. */ +#define GPIO_OUTCLR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_OUTCLR_PIN7_Msk (0x1UL << GPIO_OUTCLR_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_OUTCLR_PIN7_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN7_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN7_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 6 : Pin 6. */ +#define GPIO_OUTCLR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_OUTCLR_PIN6_Msk (0x1UL << GPIO_OUTCLR_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_OUTCLR_PIN6_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN6_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN6_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 5 : Pin 5. */ +#define GPIO_OUTCLR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_OUTCLR_PIN5_Msk (0x1UL << GPIO_OUTCLR_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_OUTCLR_PIN5_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN5_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN5_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 4 : Pin 4. */ +#define GPIO_OUTCLR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_OUTCLR_PIN4_Msk (0x1UL << GPIO_OUTCLR_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_OUTCLR_PIN4_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN4_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN4_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 3 : Pin 3. */ +#define GPIO_OUTCLR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_OUTCLR_PIN3_Msk (0x1UL << GPIO_OUTCLR_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_OUTCLR_PIN3_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN3_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN3_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 2 : Pin 2. */ +#define GPIO_OUTCLR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_OUTCLR_PIN2_Msk (0x1UL << GPIO_OUTCLR_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_OUTCLR_PIN2_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN2_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN2_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 1 : Pin 1. */ +#define GPIO_OUTCLR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_OUTCLR_PIN1_Msk (0x1UL << GPIO_OUTCLR_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_OUTCLR_PIN1_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN1_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN1_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 0 : Pin 0. */ +#define GPIO_OUTCLR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_OUTCLR_PIN0_Msk (0x1UL << GPIO_OUTCLR_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_OUTCLR_PIN0_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN0_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN0_Clear (1UL) /*!< Set pin driver low. */ + +/* Register: GPIO_IN */ +/* Description: Read GPIO port. */ + +/* Bit 31 : Pin 31. */ +#define GPIO_IN_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_IN_PIN31_Msk (0x1UL << GPIO_IN_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_IN_PIN31_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN31_High (1UL) /*!< Pin input is high. */ + +/* Bit 30 : Pin 30. */ +#define GPIO_IN_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_IN_PIN30_Msk (0x1UL << GPIO_IN_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_IN_PIN30_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN30_High (1UL) /*!< Pin input is high. */ + +/* Bit 29 : Pin 29. */ +#define GPIO_IN_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_IN_PIN29_Msk (0x1UL << GPIO_IN_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_IN_PIN29_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN29_High (1UL) /*!< Pin input is high. */ + +/* Bit 28 : Pin 28. */ +#define GPIO_IN_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_IN_PIN28_Msk (0x1UL << GPIO_IN_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_IN_PIN28_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN28_High (1UL) /*!< Pin input is high. */ + +/* Bit 27 : Pin 27. */ +#define GPIO_IN_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_IN_PIN27_Msk (0x1UL << GPIO_IN_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_IN_PIN27_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN27_High (1UL) /*!< Pin input is high. */ + +/* Bit 26 : Pin 26. */ +#define GPIO_IN_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_IN_PIN26_Msk (0x1UL << GPIO_IN_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_IN_PIN26_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN26_High (1UL) /*!< Pin input is high. */ + +/* Bit 25 : Pin 25. */ +#define GPIO_IN_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_IN_PIN25_Msk (0x1UL << GPIO_IN_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_IN_PIN25_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN25_High (1UL) /*!< Pin input is high. */ + +/* Bit 24 : Pin 24. */ +#define GPIO_IN_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_IN_PIN24_Msk (0x1UL << GPIO_IN_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_IN_PIN24_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN24_High (1UL) /*!< Pin input is high. */ + +/* Bit 23 : Pin 23. */ +#define GPIO_IN_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_IN_PIN23_Msk (0x1UL << GPIO_IN_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_IN_PIN23_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN23_High (1UL) /*!< Pin input is high. */ + +/* Bit 22 : Pin 22. */ +#define GPIO_IN_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_IN_PIN22_Msk (0x1UL << GPIO_IN_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_IN_PIN22_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN22_High (1UL) /*!< Pin input is high. */ + +/* Bit 21 : Pin 21. */ +#define GPIO_IN_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_IN_PIN21_Msk (0x1UL << GPIO_IN_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_IN_PIN21_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN21_High (1UL) /*!< Pin input is high. */ + +/* Bit 20 : Pin 20. */ +#define GPIO_IN_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_IN_PIN20_Msk (0x1UL << GPIO_IN_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_IN_PIN20_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN20_High (1UL) /*!< Pin input is high. */ + +/* Bit 19 : Pin 19. */ +#define GPIO_IN_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_IN_PIN19_Msk (0x1UL << GPIO_IN_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_IN_PIN19_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN19_High (1UL) /*!< Pin input is high. */ + +/* Bit 18 : Pin 18. */ +#define GPIO_IN_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_IN_PIN18_Msk (0x1UL << GPIO_IN_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_IN_PIN18_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN18_High (1UL) /*!< Pin input is high. */ + +/* Bit 17 : Pin 17. */ +#define GPIO_IN_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_IN_PIN17_Msk (0x1UL << GPIO_IN_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_IN_PIN17_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN17_High (1UL) /*!< Pin input is high. */ + +/* Bit 16 : Pin 16. */ +#define GPIO_IN_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_IN_PIN16_Msk (0x1UL << GPIO_IN_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_IN_PIN16_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN16_High (1UL) /*!< Pin input is high. */ + +/* Bit 15 : Pin 15. */ +#define GPIO_IN_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_IN_PIN15_Msk (0x1UL << GPIO_IN_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_IN_PIN15_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN15_High (1UL) /*!< Pin input is high. */ + +/* Bit 14 : Pin 14. */ +#define GPIO_IN_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_IN_PIN14_Msk (0x1UL << GPIO_IN_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_IN_PIN14_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN14_High (1UL) /*!< Pin input is high. */ + +/* Bit 13 : Pin 13. */ +#define GPIO_IN_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_IN_PIN13_Msk (0x1UL << GPIO_IN_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_IN_PIN13_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN13_High (1UL) /*!< Pin input is high. */ + +/* Bit 12 : Pin 12. */ +#define GPIO_IN_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_IN_PIN12_Msk (0x1UL << GPIO_IN_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_IN_PIN12_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN12_High (1UL) /*!< Pin input is high. */ + +/* Bit 11 : Pin 11. */ +#define GPIO_IN_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_IN_PIN11_Msk (0x1UL << GPIO_IN_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_IN_PIN11_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN11_High (1UL) /*!< Pin input is high. */ + +/* Bit 10 : Pin 10. */ +#define GPIO_IN_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_IN_PIN10_Msk (0x1UL << GPIO_IN_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_IN_PIN10_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN10_High (1UL) /*!< Pin input is high. */ + +/* Bit 9 : Pin 9. */ +#define GPIO_IN_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_IN_PIN9_Msk (0x1UL << GPIO_IN_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_IN_PIN9_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN9_High (1UL) /*!< Pin input is high. */ + +/* Bit 8 : Pin 8. */ +#define GPIO_IN_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_IN_PIN8_Msk (0x1UL << GPIO_IN_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_IN_PIN8_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN8_High (1UL) /*!< Pin input is high. */ + +/* Bit 7 : Pin 7. */ +#define GPIO_IN_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_IN_PIN7_Msk (0x1UL << GPIO_IN_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_IN_PIN7_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN7_High (1UL) /*!< Pin input is high. */ + +/* Bit 6 : Pin 6. */ +#define GPIO_IN_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_IN_PIN6_Msk (0x1UL << GPIO_IN_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_IN_PIN6_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN6_High (1UL) /*!< Pin input is high. */ + +/* Bit 5 : Pin 5. */ +#define GPIO_IN_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_IN_PIN5_Msk (0x1UL << GPIO_IN_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_IN_PIN5_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN5_High (1UL) /*!< Pin input is high. */ + +/* Bit 4 : Pin 4. */ +#define GPIO_IN_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_IN_PIN4_Msk (0x1UL << GPIO_IN_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_IN_PIN4_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN4_High (1UL) /*!< Pin input is high. */ + +/* Bit 3 : Pin 3. */ +#define GPIO_IN_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_IN_PIN3_Msk (0x1UL << GPIO_IN_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_IN_PIN3_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN3_High (1UL) /*!< Pin input is high. */ + +/* Bit 2 : Pin 2. */ +#define GPIO_IN_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_IN_PIN2_Msk (0x1UL << GPIO_IN_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_IN_PIN2_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN2_High (1UL) /*!< Pin input is high. */ + +/* Bit 1 : Pin 1. */ +#define GPIO_IN_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_IN_PIN1_Msk (0x1UL << GPIO_IN_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_IN_PIN1_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN1_High (1UL) /*!< Pin input is high. */ + +/* Bit 0 : Pin 0. */ +#define GPIO_IN_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_IN_PIN0_Msk (0x1UL << GPIO_IN_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_IN_PIN0_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN0_High (1UL) /*!< Pin input is high. */ + +/* Register: GPIO_DIR */ +/* Description: Direction of GPIO pins. */ + +/* Bit 31 : Pin 31. */ +#define GPIO_DIR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_DIR_PIN31_Msk (0x1UL << GPIO_DIR_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_DIR_PIN31_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN31_Output (1UL) /*!< Pin set as output. */ + +/* Bit 30 : Pin 30. */ +#define GPIO_DIR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_DIR_PIN30_Msk (0x1UL << GPIO_DIR_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_DIR_PIN30_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN30_Output (1UL) /*!< Pin set as output. */ + +/* Bit 29 : Pin 29. */ +#define GPIO_DIR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_DIR_PIN29_Msk (0x1UL << GPIO_DIR_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_DIR_PIN29_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN29_Output (1UL) /*!< Pin set as output. */ + +/* Bit 28 : Pin 28. */ +#define GPIO_DIR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_DIR_PIN28_Msk (0x1UL << GPIO_DIR_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_DIR_PIN28_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN28_Output (1UL) /*!< Pin set as output. */ + +/* Bit 27 : Pin 27. */ +#define GPIO_DIR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_DIR_PIN27_Msk (0x1UL << GPIO_DIR_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_DIR_PIN27_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN27_Output (1UL) /*!< Pin set as output. */ + +/* Bit 26 : Pin 26. */ +#define GPIO_DIR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_DIR_PIN26_Msk (0x1UL << GPIO_DIR_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_DIR_PIN26_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN26_Output (1UL) /*!< Pin set as output. */ + +/* Bit 25 : Pin 25. */ +#define GPIO_DIR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_DIR_PIN25_Msk (0x1UL << GPIO_DIR_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_DIR_PIN25_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN25_Output (1UL) /*!< Pin set as output. */ + +/* Bit 24 : Pin 24. */ +#define GPIO_DIR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_DIR_PIN24_Msk (0x1UL << GPIO_DIR_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_DIR_PIN24_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN24_Output (1UL) /*!< Pin set as output. */ + +/* Bit 23 : Pin 23. */ +#define GPIO_DIR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_DIR_PIN23_Msk (0x1UL << GPIO_DIR_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_DIR_PIN23_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN23_Output (1UL) /*!< Pin set as output. */ + +/* Bit 22 : Pin 22. */ +#define GPIO_DIR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_DIR_PIN22_Msk (0x1UL << GPIO_DIR_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_DIR_PIN22_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN22_Output (1UL) /*!< Pin set as output. */ + +/* Bit 21 : Pin 21. */ +#define GPIO_DIR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_DIR_PIN21_Msk (0x1UL << GPIO_DIR_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_DIR_PIN21_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN21_Output (1UL) /*!< Pin set as output. */ + +/* Bit 20 : Pin 20. */ +#define GPIO_DIR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_DIR_PIN20_Msk (0x1UL << GPIO_DIR_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_DIR_PIN20_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN20_Output (1UL) /*!< Pin set as output. */ + +/* Bit 19 : Pin 19. */ +#define GPIO_DIR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_DIR_PIN19_Msk (0x1UL << GPIO_DIR_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_DIR_PIN19_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN19_Output (1UL) /*!< Pin set as output. */ + +/* Bit 18 : Pin 18. */ +#define GPIO_DIR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_DIR_PIN18_Msk (0x1UL << GPIO_DIR_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_DIR_PIN18_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN18_Output (1UL) /*!< Pin set as output. */ + +/* Bit 17 : Pin 17. */ +#define GPIO_DIR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_DIR_PIN17_Msk (0x1UL << GPIO_DIR_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_DIR_PIN17_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN17_Output (1UL) /*!< Pin set as output. */ + +/* Bit 16 : Pin 16. */ +#define GPIO_DIR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_DIR_PIN16_Msk (0x1UL << GPIO_DIR_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_DIR_PIN16_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN16_Output (1UL) /*!< Pin set as output. */ + +/* Bit 15 : Pin 15. */ +#define GPIO_DIR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_DIR_PIN15_Msk (0x1UL << GPIO_DIR_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_DIR_PIN15_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN15_Output (1UL) /*!< Pin set as output. */ + +/* Bit 14 : Pin 14. */ +#define GPIO_DIR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_DIR_PIN14_Msk (0x1UL << GPIO_DIR_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_DIR_PIN14_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN14_Output (1UL) /*!< Pin set as output. */ + +/* Bit 13 : Pin 13. */ +#define GPIO_DIR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_DIR_PIN13_Msk (0x1UL << GPIO_DIR_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_DIR_PIN13_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN13_Output (1UL) /*!< Pin set as output. */ + +/* Bit 12 : Pin 12. */ +#define GPIO_DIR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_DIR_PIN12_Msk (0x1UL << GPIO_DIR_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_DIR_PIN12_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN12_Output (1UL) /*!< Pin set as output. */ + +/* Bit 11 : Pin 11. */ +#define GPIO_DIR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_DIR_PIN11_Msk (0x1UL << GPIO_DIR_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_DIR_PIN11_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN11_Output (1UL) /*!< Pin set as output. */ + +/* Bit 10 : Pin 10. */ +#define GPIO_DIR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_DIR_PIN10_Msk (0x1UL << GPIO_DIR_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_DIR_PIN10_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN10_Output (1UL) /*!< Pin set as output. */ + +/* Bit 9 : Pin 9. */ +#define GPIO_DIR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_DIR_PIN9_Msk (0x1UL << GPIO_DIR_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_DIR_PIN9_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN9_Output (1UL) /*!< Pin set as output. */ + +/* Bit 8 : Pin 8. */ +#define GPIO_DIR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_DIR_PIN8_Msk (0x1UL << GPIO_DIR_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_DIR_PIN8_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN8_Output (1UL) /*!< Pin set as output. */ + +/* Bit 7 : Pin 7. */ +#define GPIO_DIR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_DIR_PIN7_Msk (0x1UL << GPIO_DIR_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_DIR_PIN7_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN7_Output (1UL) /*!< Pin set as output. */ + +/* Bit 6 : Pin 6. */ +#define GPIO_DIR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_DIR_PIN6_Msk (0x1UL << GPIO_DIR_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_DIR_PIN6_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN6_Output (1UL) /*!< Pin set as output. */ + +/* Bit 5 : Pin 5. */ +#define GPIO_DIR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_DIR_PIN5_Msk (0x1UL << GPIO_DIR_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_DIR_PIN5_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN5_Output (1UL) /*!< Pin set as output. */ + +/* Bit 4 : Pin 4. */ +#define GPIO_DIR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_DIR_PIN4_Msk (0x1UL << GPIO_DIR_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_DIR_PIN4_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN4_Output (1UL) /*!< Pin set as output. */ + +/* Bit 3 : Pin 3. */ +#define GPIO_DIR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_DIR_PIN3_Msk (0x1UL << GPIO_DIR_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_DIR_PIN3_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN3_Output (1UL) /*!< Pin set as output. */ + +/* Bit 2 : Pin 2. */ +#define GPIO_DIR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_DIR_PIN2_Msk (0x1UL << GPIO_DIR_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_DIR_PIN2_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN2_Output (1UL) /*!< Pin set as output. */ + +/* Bit 1 : Pin 1. */ +#define GPIO_DIR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_DIR_PIN1_Msk (0x1UL << GPIO_DIR_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_DIR_PIN1_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN1_Output (1UL) /*!< Pin set as output. */ + +/* Bit 0 : Pin 0. */ +#define GPIO_DIR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_DIR_PIN0_Msk (0x1UL << GPIO_DIR_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_DIR_PIN0_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN0_Output (1UL) /*!< Pin set as output. */ + +/* Register: GPIO_DIRSET */ +/* Description: DIR set register. */ + +/* Bit 31 : Set as output pin 31. */ +#define GPIO_DIRSET_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_DIRSET_PIN31_Msk (0x1UL << GPIO_DIRSET_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_DIRSET_PIN31_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN31_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN31_Set (1UL) /*!< Set pin as output. */ + +/* Bit 30 : Set as output pin 30. */ +#define GPIO_DIRSET_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_DIRSET_PIN30_Msk (0x1UL << GPIO_DIRSET_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_DIRSET_PIN30_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN30_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN30_Set (1UL) /*!< Set pin as output. */ + +/* Bit 29 : Set as output pin 29. */ +#define GPIO_DIRSET_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_DIRSET_PIN29_Msk (0x1UL << GPIO_DIRSET_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_DIRSET_PIN29_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN29_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN29_Set (1UL) /*!< Set pin as output. */ + +/* Bit 28 : Set as output pin 28. */ +#define GPIO_DIRSET_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_DIRSET_PIN28_Msk (0x1UL << GPIO_DIRSET_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_DIRSET_PIN28_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN28_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN28_Set (1UL) /*!< Set pin as output. */ + +/* Bit 27 : Set as output pin 27. */ +#define GPIO_DIRSET_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_DIRSET_PIN27_Msk (0x1UL << GPIO_DIRSET_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_DIRSET_PIN27_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN27_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN27_Set (1UL) /*!< Set pin as output. */ + +/* Bit 26 : Set as output pin 26. */ +#define GPIO_DIRSET_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_DIRSET_PIN26_Msk (0x1UL << GPIO_DIRSET_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_DIRSET_PIN26_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN26_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN26_Set (1UL) /*!< Set pin as output. */ + +/* Bit 25 : Set as output pin 25. */ +#define GPIO_DIRSET_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_DIRSET_PIN25_Msk (0x1UL << GPIO_DIRSET_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_DIRSET_PIN25_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN25_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN25_Set (1UL) /*!< Set pin as output. */ + +/* Bit 24 : Set as output pin 24. */ +#define GPIO_DIRSET_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_DIRSET_PIN24_Msk (0x1UL << GPIO_DIRSET_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_DIRSET_PIN24_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN24_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN24_Set (1UL) /*!< Set pin as output. */ + +/* Bit 23 : Set as output pin 23. */ +#define GPIO_DIRSET_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_DIRSET_PIN23_Msk (0x1UL << GPIO_DIRSET_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_DIRSET_PIN23_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN23_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN23_Set (1UL) /*!< Set pin as output. */ + +/* Bit 22 : Set as output pin 22. */ +#define GPIO_DIRSET_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_DIRSET_PIN22_Msk (0x1UL << GPIO_DIRSET_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_DIRSET_PIN22_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN22_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN22_Set (1UL) /*!< Set pin as output. */ + +/* Bit 21 : Set as output pin 21. */ +#define GPIO_DIRSET_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_DIRSET_PIN21_Msk (0x1UL << GPIO_DIRSET_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_DIRSET_PIN21_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN21_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN21_Set (1UL) /*!< Set pin as output. */ + +/* Bit 20 : Set as output pin 20. */ +#define GPIO_DIRSET_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_DIRSET_PIN20_Msk (0x1UL << GPIO_DIRSET_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_DIRSET_PIN20_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN20_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN20_Set (1UL) /*!< Set pin as output. */ + +/* Bit 19 : Set as output pin 19. */ +#define GPIO_DIRSET_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_DIRSET_PIN19_Msk (0x1UL << GPIO_DIRSET_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_DIRSET_PIN19_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN19_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN19_Set (1UL) /*!< Set pin as output. */ + +/* Bit 18 : Set as output pin 18. */ +#define GPIO_DIRSET_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_DIRSET_PIN18_Msk (0x1UL << GPIO_DIRSET_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_DIRSET_PIN18_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN18_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN18_Set (1UL) /*!< Set pin as output. */ + +/* Bit 17 : Set as output pin 17. */ +#define GPIO_DIRSET_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_DIRSET_PIN17_Msk (0x1UL << GPIO_DIRSET_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_DIRSET_PIN17_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN17_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN17_Set (1UL) /*!< Set pin as output. */ + +/* Bit 16 : Set as output pin 16. */ +#define GPIO_DIRSET_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_DIRSET_PIN16_Msk (0x1UL << GPIO_DIRSET_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_DIRSET_PIN16_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN16_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN16_Set (1UL) /*!< Set pin as output. */ + +/* Bit 15 : Set as output pin 15. */ +#define GPIO_DIRSET_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_DIRSET_PIN15_Msk (0x1UL << GPIO_DIRSET_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_DIRSET_PIN15_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN15_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN15_Set (1UL) /*!< Set pin as output. */ + +/* Bit 14 : Set as output pin 14. */ +#define GPIO_DIRSET_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_DIRSET_PIN14_Msk (0x1UL << GPIO_DIRSET_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_DIRSET_PIN14_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN14_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN14_Set (1UL) /*!< Set pin as output. */ + +/* Bit 13 : Set as output pin 13. */ +#define GPIO_DIRSET_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_DIRSET_PIN13_Msk (0x1UL << GPIO_DIRSET_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_DIRSET_PIN13_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN13_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN13_Set (1UL) /*!< Set pin as output. */ + +/* Bit 12 : Set as output pin 12. */ +#define GPIO_DIRSET_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_DIRSET_PIN12_Msk (0x1UL << GPIO_DIRSET_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_DIRSET_PIN12_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN12_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN12_Set (1UL) /*!< Set pin as output. */ + +/* Bit 11 : Set as output pin 11. */ +#define GPIO_DIRSET_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_DIRSET_PIN11_Msk (0x1UL << GPIO_DIRSET_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_DIRSET_PIN11_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN11_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN11_Set (1UL) /*!< Set pin as output. */ + +/* Bit 10 : Set as output pin 10. */ +#define GPIO_DIRSET_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_DIRSET_PIN10_Msk (0x1UL << GPIO_DIRSET_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_DIRSET_PIN10_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN10_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN10_Set (1UL) /*!< Set pin as output. */ + +/* Bit 9 : Set as output pin 9. */ +#define GPIO_DIRSET_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_DIRSET_PIN9_Msk (0x1UL << GPIO_DIRSET_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_DIRSET_PIN9_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN9_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN9_Set (1UL) /*!< Set pin as output. */ + +/* Bit 8 : Set as output pin 8. */ +#define GPIO_DIRSET_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_DIRSET_PIN8_Msk (0x1UL << GPIO_DIRSET_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_DIRSET_PIN8_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN8_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN8_Set (1UL) /*!< Set pin as output. */ + +/* Bit 7 : Set as output pin 7. */ +#define GPIO_DIRSET_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_DIRSET_PIN7_Msk (0x1UL << GPIO_DIRSET_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_DIRSET_PIN7_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN7_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN7_Set (1UL) /*!< Set pin as output. */ + +/* Bit 6 : Set as output pin 6. */ +#define GPIO_DIRSET_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_DIRSET_PIN6_Msk (0x1UL << GPIO_DIRSET_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_DIRSET_PIN6_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN6_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN6_Set (1UL) /*!< Set pin as output. */ + +/* Bit 5 : Set as output pin 5. */ +#define GPIO_DIRSET_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_DIRSET_PIN5_Msk (0x1UL << GPIO_DIRSET_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_DIRSET_PIN5_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN5_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN5_Set (1UL) /*!< Set pin as output. */ + +/* Bit 4 : Set as output pin 4. */ +#define GPIO_DIRSET_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_DIRSET_PIN4_Msk (0x1UL << GPIO_DIRSET_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_DIRSET_PIN4_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN4_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN4_Set (1UL) /*!< Set pin as output. */ + +/* Bit 3 : Set as output pin 3. */ +#define GPIO_DIRSET_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_DIRSET_PIN3_Msk (0x1UL << GPIO_DIRSET_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_DIRSET_PIN3_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN3_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN3_Set (1UL) /*!< Set pin as output. */ + +/* Bit 2 : Set as output pin 2. */ +#define GPIO_DIRSET_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_DIRSET_PIN2_Msk (0x1UL << GPIO_DIRSET_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_DIRSET_PIN2_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN2_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN2_Set (1UL) /*!< Set pin as output. */ + +/* Bit 1 : Set as output pin 1. */ +#define GPIO_DIRSET_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_DIRSET_PIN1_Msk (0x1UL << GPIO_DIRSET_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_DIRSET_PIN1_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN1_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN1_Set (1UL) /*!< Set pin as output. */ + +/* Bit 0 : Set as output pin 0. */ +#define GPIO_DIRSET_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_DIRSET_PIN0_Msk (0x1UL << GPIO_DIRSET_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_DIRSET_PIN0_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN0_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN0_Set (1UL) /*!< Set pin as output. */ + +/* Register: GPIO_DIRCLR */ +/* Description: DIR clear register. */ + +/* Bit 31 : Set as input pin 31. */ +#define GPIO_DIRCLR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_DIRCLR_PIN31_Msk (0x1UL << GPIO_DIRCLR_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_DIRCLR_PIN31_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN31_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN31_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 30 : Set as input pin 30. */ +#define GPIO_DIRCLR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_DIRCLR_PIN30_Msk (0x1UL << GPIO_DIRCLR_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_DIRCLR_PIN30_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN30_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN30_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 29 : Set as input pin 29. */ +#define GPIO_DIRCLR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_DIRCLR_PIN29_Msk (0x1UL << GPIO_DIRCLR_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_DIRCLR_PIN29_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN29_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN29_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 28 : Set as input pin 28. */ +#define GPIO_DIRCLR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_DIRCLR_PIN28_Msk (0x1UL << GPIO_DIRCLR_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_DIRCLR_PIN28_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN28_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN28_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 27 : Set as input pin 27. */ +#define GPIO_DIRCLR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_DIRCLR_PIN27_Msk (0x1UL << GPIO_DIRCLR_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_DIRCLR_PIN27_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN27_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN27_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 26 : Set as input pin 26. */ +#define GPIO_DIRCLR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_DIRCLR_PIN26_Msk (0x1UL << GPIO_DIRCLR_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_DIRCLR_PIN26_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN26_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN26_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 25 : Set as input pin 25. */ +#define GPIO_DIRCLR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_DIRCLR_PIN25_Msk (0x1UL << GPIO_DIRCLR_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_DIRCLR_PIN25_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN25_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN25_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 24 : Set as input pin 24. */ +#define GPIO_DIRCLR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_DIRCLR_PIN24_Msk (0x1UL << GPIO_DIRCLR_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_DIRCLR_PIN24_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN24_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN24_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 23 : Set as input pin 23. */ +#define GPIO_DIRCLR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_DIRCLR_PIN23_Msk (0x1UL << GPIO_DIRCLR_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_DIRCLR_PIN23_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN23_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN23_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 22 : Set as input pin 22. */ +#define GPIO_DIRCLR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_DIRCLR_PIN22_Msk (0x1UL << GPIO_DIRCLR_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_DIRCLR_PIN22_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN22_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN22_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 21 : Set as input pin 21. */ +#define GPIO_DIRCLR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_DIRCLR_PIN21_Msk (0x1UL << GPIO_DIRCLR_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_DIRCLR_PIN21_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN21_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN21_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 20 : Set as input pin 20. */ +#define GPIO_DIRCLR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_DIRCLR_PIN20_Msk (0x1UL << GPIO_DIRCLR_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_DIRCLR_PIN20_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN20_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN20_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 19 : Set as input pin 19. */ +#define GPIO_DIRCLR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_DIRCLR_PIN19_Msk (0x1UL << GPIO_DIRCLR_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_DIRCLR_PIN19_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN19_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN19_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 18 : Set as input pin 18. */ +#define GPIO_DIRCLR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_DIRCLR_PIN18_Msk (0x1UL << GPIO_DIRCLR_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_DIRCLR_PIN18_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN18_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN18_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 17 : Set as input pin 17. */ +#define GPIO_DIRCLR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_DIRCLR_PIN17_Msk (0x1UL << GPIO_DIRCLR_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_DIRCLR_PIN17_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN17_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN17_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 16 : Set as input pin 16. */ +#define GPIO_DIRCLR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_DIRCLR_PIN16_Msk (0x1UL << GPIO_DIRCLR_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_DIRCLR_PIN16_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN16_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN16_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 15 : Set as input pin 15. */ +#define GPIO_DIRCLR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_DIRCLR_PIN15_Msk (0x1UL << GPIO_DIRCLR_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_DIRCLR_PIN15_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN15_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN15_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 14 : Set as input pin 14. */ +#define GPIO_DIRCLR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_DIRCLR_PIN14_Msk (0x1UL << GPIO_DIRCLR_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_DIRCLR_PIN14_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN14_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN14_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 13 : Set as input pin 13. */ +#define GPIO_DIRCLR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_DIRCLR_PIN13_Msk (0x1UL << GPIO_DIRCLR_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_DIRCLR_PIN13_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN13_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN13_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 12 : Set as input pin 12. */ +#define GPIO_DIRCLR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_DIRCLR_PIN12_Msk (0x1UL << GPIO_DIRCLR_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_DIRCLR_PIN12_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN12_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN12_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 11 : Set as input pin 11. */ +#define GPIO_DIRCLR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_DIRCLR_PIN11_Msk (0x1UL << GPIO_DIRCLR_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_DIRCLR_PIN11_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN11_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN11_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 10 : Set as input pin 10. */ +#define GPIO_DIRCLR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_DIRCLR_PIN10_Msk (0x1UL << GPIO_DIRCLR_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_DIRCLR_PIN10_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN10_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN10_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 9 : Set as input pin 9. */ +#define GPIO_DIRCLR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_DIRCLR_PIN9_Msk (0x1UL << GPIO_DIRCLR_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_DIRCLR_PIN9_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN9_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN9_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 8 : Set as input pin 8. */ +#define GPIO_DIRCLR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_DIRCLR_PIN8_Msk (0x1UL << GPIO_DIRCLR_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_DIRCLR_PIN8_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN8_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN8_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 7 : Set as input pin 7. */ +#define GPIO_DIRCLR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_DIRCLR_PIN7_Msk (0x1UL << GPIO_DIRCLR_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_DIRCLR_PIN7_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN7_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN7_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 6 : Set as input pin 6. */ +#define GPIO_DIRCLR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_DIRCLR_PIN6_Msk (0x1UL << GPIO_DIRCLR_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_DIRCLR_PIN6_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN6_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN6_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 5 : Set as input pin 5. */ +#define GPIO_DIRCLR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_DIRCLR_PIN5_Msk (0x1UL << GPIO_DIRCLR_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_DIRCLR_PIN5_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN5_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN5_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 4 : Set as input pin 4. */ +#define GPIO_DIRCLR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_DIRCLR_PIN4_Msk (0x1UL << GPIO_DIRCLR_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_DIRCLR_PIN4_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN4_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN4_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 3 : Set as input pin 3. */ +#define GPIO_DIRCLR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_DIRCLR_PIN3_Msk (0x1UL << GPIO_DIRCLR_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_DIRCLR_PIN3_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN3_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN3_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 2 : Set as input pin 2. */ +#define GPIO_DIRCLR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_DIRCLR_PIN2_Msk (0x1UL << GPIO_DIRCLR_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_DIRCLR_PIN2_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN2_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN2_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 1 : Set as input pin 1. */ +#define GPIO_DIRCLR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_DIRCLR_PIN1_Msk (0x1UL << GPIO_DIRCLR_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_DIRCLR_PIN1_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN1_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN1_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 0 : Set as input pin 0. */ +#define GPIO_DIRCLR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_DIRCLR_PIN0_Msk (0x1UL << GPIO_DIRCLR_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_DIRCLR_PIN0_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN0_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN0_Clear (1UL) /*!< Set pin as input. */ + +/* Register: GPIO_PIN_CNF */ +/* Description: Configuration of GPIO pins. */ + +/* Bits 17..16 : Pin sensing mechanism. */ +#define GPIO_PIN_CNF_SENSE_Pos (16UL) /*!< Position of SENSE field. */ +#define GPIO_PIN_CNF_SENSE_Msk (0x3UL << GPIO_PIN_CNF_SENSE_Pos) /*!< Bit mask of SENSE field. */ +#define GPIO_PIN_CNF_SENSE_Disabled (0x00UL) /*!< Disabled. */ +#define GPIO_PIN_CNF_SENSE_High (0x02UL) /*!< Wakeup on high level. */ +#define GPIO_PIN_CNF_SENSE_Low (0x03UL) /*!< Wakeup on low level. */ + +/* Bits 10..8 : Drive configuration. */ +#define GPIO_PIN_CNF_DRIVE_Pos (8UL) /*!< Position of DRIVE field. */ +#define GPIO_PIN_CNF_DRIVE_Msk (0x7UL << GPIO_PIN_CNF_DRIVE_Pos) /*!< Bit mask of DRIVE field. */ +#define GPIO_PIN_CNF_DRIVE_S0S1 (0x00UL) /*!< Standard '0', Standard '1'. */ +#define GPIO_PIN_CNF_DRIVE_H0S1 (0x01UL) /*!< High '0', Standard '1'. */ +#define GPIO_PIN_CNF_DRIVE_S0H1 (0x02UL) /*!< Standard '0', High '1'. */ +#define GPIO_PIN_CNF_DRIVE_H0H1 (0x03UL) /*!< High '0', High '1'. */ +#define GPIO_PIN_CNF_DRIVE_D0S1 (0x04UL) /*!< Disconnected '0', Standard '1'. */ +#define GPIO_PIN_CNF_DRIVE_D0H1 (0x05UL) /*!< Disconnected '0', High '1'. */ +#define GPIO_PIN_CNF_DRIVE_S0D1 (0x06UL) /*!< Standard '0', Disconnected '1'. */ +#define GPIO_PIN_CNF_DRIVE_H0D1 (0x07UL) /*!< High '0', Disconnected '1'. */ + +/* Bits 3..2 : Pull-up or -down configuration. */ +#define GPIO_PIN_CNF_PULL_Pos (2UL) /*!< Position of PULL field. */ +#define GPIO_PIN_CNF_PULL_Msk (0x3UL << GPIO_PIN_CNF_PULL_Pos) /*!< Bit mask of PULL field. */ +#define GPIO_PIN_CNF_PULL_Disabled (0x00UL) /*!< No pull. */ +#define GPIO_PIN_CNF_PULL_Pulldown (0x01UL) /*!< Pulldown on pin. */ +#define GPIO_PIN_CNF_PULL_Pullup (0x03UL) /*!< Pullup on pin. */ + +/* Bit 1 : Connect or disconnect input path. */ +#define GPIO_PIN_CNF_INPUT_Pos (1UL) /*!< Position of INPUT field. */ +#define GPIO_PIN_CNF_INPUT_Msk (0x1UL << GPIO_PIN_CNF_INPUT_Pos) /*!< Bit mask of INPUT field. */ +#define GPIO_PIN_CNF_INPUT_Connect (0UL) /*!< Connect input pin. */ +#define GPIO_PIN_CNF_INPUT_Disconnect (1UL) /*!< Disconnect input pin. */ + +/* Bit 0 : Pin direction. */ +#define GPIO_PIN_CNF_DIR_Pos (0UL) /*!< Position of DIR field. */ +#define GPIO_PIN_CNF_DIR_Msk (0x1UL << GPIO_PIN_CNF_DIR_Pos) /*!< Bit mask of DIR field. */ +#define GPIO_PIN_CNF_DIR_Input (0UL) /*!< Configure pin as an input pin. */ +#define GPIO_PIN_CNF_DIR_Output (1UL) /*!< Configure pin as an output pin. */ + + +/* Peripheral: GPIOTE */ +/* Description: GPIO tasks and events. */ + +/* Register: GPIOTE_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 31 : Enable interrupt on PORT event. */ +#define GPIOTE_INTENSET_PORT_Pos (31UL) /*!< Position of PORT field. */ +#define GPIOTE_INTENSET_PORT_Msk (0x1UL << GPIOTE_INTENSET_PORT_Pos) /*!< Bit mask of PORT field. */ +#define GPIOTE_INTENSET_PORT_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENSET_PORT_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENSET_PORT_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 3 : Enable interrupt on IN[3] event. */ +#define GPIOTE_INTENSET_IN3_Pos (3UL) /*!< Position of IN3 field. */ +#define GPIOTE_INTENSET_IN3_Msk (0x1UL << GPIOTE_INTENSET_IN3_Pos) /*!< Bit mask of IN3 field. */ +#define GPIOTE_INTENSET_IN3_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENSET_IN3_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENSET_IN3_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 2 : Enable interrupt on IN[2] event. */ +#define GPIOTE_INTENSET_IN2_Pos (2UL) /*!< Position of IN2 field. */ +#define GPIOTE_INTENSET_IN2_Msk (0x1UL << GPIOTE_INTENSET_IN2_Pos) /*!< Bit mask of IN2 field. */ +#define GPIOTE_INTENSET_IN2_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENSET_IN2_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENSET_IN2_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on IN[1] event. */ +#define GPIOTE_INTENSET_IN1_Pos (1UL) /*!< Position of IN1 field. */ +#define GPIOTE_INTENSET_IN1_Msk (0x1UL << GPIOTE_INTENSET_IN1_Pos) /*!< Bit mask of IN1 field. */ +#define GPIOTE_INTENSET_IN1_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENSET_IN1_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENSET_IN1_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on IN[0] event. */ +#define GPIOTE_INTENSET_IN0_Pos (0UL) /*!< Position of IN0 field. */ +#define GPIOTE_INTENSET_IN0_Msk (0x1UL << GPIOTE_INTENSET_IN0_Pos) /*!< Bit mask of IN0 field. */ +#define GPIOTE_INTENSET_IN0_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENSET_IN0_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENSET_IN0_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: GPIOTE_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 31 : Disable interrupt on PORT event. */ +#define GPIOTE_INTENCLR_PORT_Pos (31UL) /*!< Position of PORT field. */ +#define GPIOTE_INTENCLR_PORT_Msk (0x1UL << GPIOTE_INTENCLR_PORT_Pos) /*!< Bit mask of PORT field. */ +#define GPIOTE_INTENCLR_PORT_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENCLR_PORT_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENCLR_PORT_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 3 : Disable interrupt on IN[3] event. */ +#define GPIOTE_INTENCLR_IN3_Pos (3UL) /*!< Position of IN3 field. */ +#define GPIOTE_INTENCLR_IN3_Msk (0x1UL << GPIOTE_INTENCLR_IN3_Pos) /*!< Bit mask of IN3 field. */ +#define GPIOTE_INTENCLR_IN3_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENCLR_IN3_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENCLR_IN3_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 2 : Disable interrupt on IN[2] event. */ +#define GPIOTE_INTENCLR_IN2_Pos (2UL) /*!< Position of IN2 field. */ +#define GPIOTE_INTENCLR_IN2_Msk (0x1UL << GPIOTE_INTENCLR_IN2_Pos) /*!< Bit mask of IN2 field. */ +#define GPIOTE_INTENCLR_IN2_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENCLR_IN2_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENCLR_IN2_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on IN[1] event. */ +#define GPIOTE_INTENCLR_IN1_Pos (1UL) /*!< Position of IN1 field. */ +#define GPIOTE_INTENCLR_IN1_Msk (0x1UL << GPIOTE_INTENCLR_IN1_Pos) /*!< Bit mask of IN1 field. */ +#define GPIOTE_INTENCLR_IN1_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENCLR_IN1_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENCLR_IN1_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on IN[0] event. */ +#define GPIOTE_INTENCLR_IN0_Pos (0UL) /*!< Position of IN0 field. */ +#define GPIOTE_INTENCLR_IN0_Msk (0x1UL << GPIOTE_INTENCLR_IN0_Pos) /*!< Bit mask of IN0 field. */ +#define GPIOTE_INTENCLR_IN0_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENCLR_IN0_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENCLR_IN0_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: GPIOTE_CONFIG */ +/* Description: Channel configuration registers. */ + +/* Bit 20 : Initial value of the output when the GPIOTE channel is configured as a Task. */ +#define GPIOTE_CONFIG_OUTINIT_Pos (20UL) /*!< Position of OUTINIT field. */ +#define GPIOTE_CONFIG_OUTINIT_Msk (0x1UL << GPIOTE_CONFIG_OUTINIT_Pos) /*!< Bit mask of OUTINIT field. */ +#define GPIOTE_CONFIG_OUTINIT_Low (0UL) /*!< Initial low output when in task mode. */ +#define GPIOTE_CONFIG_OUTINIT_High (1UL) /*!< Initial high output when in task mode. */ + +/* Bits 17..16 : Effects on output when in Task mode, or events on input that generates an event. */ +#define GPIOTE_CONFIG_POLARITY_Pos (16UL) /*!< Position of POLARITY field. */ +#define GPIOTE_CONFIG_POLARITY_Msk (0x3UL << GPIOTE_CONFIG_POLARITY_Pos) /*!< Bit mask of POLARITY field. */ +#define GPIOTE_CONFIG_POLARITY_LoToHi (0x01UL) /*!< Low to high. */ +#define GPIOTE_CONFIG_POLARITY_HiToLo (0x02UL) /*!< High to low. */ +#define GPIOTE_CONFIG_POLARITY_Toggle (0x03UL) /*!< Toggle. */ + +/* Bits 12..8 : Pin select. */ +#define GPIOTE_CONFIG_PSEL_Pos (8UL) /*!< Position of PSEL field. */ +#define GPIOTE_CONFIG_PSEL_Msk (0x1FUL << GPIOTE_CONFIG_PSEL_Pos) /*!< Bit mask of PSEL field. */ + +/* Bits 1..0 : Mode */ +#define GPIOTE_CONFIG_MODE_Pos (0UL) /*!< Position of MODE field. */ +#define GPIOTE_CONFIG_MODE_Msk (0x3UL << GPIOTE_CONFIG_MODE_Pos) /*!< Bit mask of MODE field. */ +#define GPIOTE_CONFIG_MODE_Disabled (0x00UL) /*!< Disabled. */ +#define GPIOTE_CONFIG_MODE_Event (0x01UL) /*!< Channel configure in event mode. */ +#define GPIOTE_CONFIG_MODE_Task (0x03UL) /*!< Channel configure in task mode. */ + +/* Register: GPIOTE_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define GPIOTE_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define GPIOTE_POWER_POWER_Msk (0x1UL << GPIOTE_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define GPIOTE_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define GPIOTE_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: LPCOMP */ +/* Description: Low power comparator. */ + +/* Register: LPCOMP_SHORTS */ +/* Description: Shortcuts for the LPCOMP. */ + +/* Bit 4 : Shortcut between CROSS event and STOP task. */ +#define LPCOMP_SHORTS_CROSS_STOP_Pos (4UL) /*!< Position of CROSS_STOP field. */ +#define LPCOMP_SHORTS_CROSS_STOP_Msk (0x1UL << LPCOMP_SHORTS_CROSS_STOP_Pos) /*!< Bit mask of CROSS_STOP field. */ +#define LPCOMP_SHORTS_CROSS_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define LPCOMP_SHORTS_CROSS_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 3 : Shortcut between UP event and STOP task. */ +#define LPCOMP_SHORTS_UP_STOP_Pos (3UL) /*!< Position of UP_STOP field. */ +#define LPCOMP_SHORTS_UP_STOP_Msk (0x1UL << LPCOMP_SHORTS_UP_STOP_Pos) /*!< Bit mask of UP_STOP field. */ +#define LPCOMP_SHORTS_UP_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define LPCOMP_SHORTS_UP_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 2 : Shortcut between DOWN event and STOP task. */ +#define LPCOMP_SHORTS_DOWN_STOP_Pos (2UL) /*!< Position of DOWN_STOP field. */ +#define LPCOMP_SHORTS_DOWN_STOP_Msk (0x1UL << LPCOMP_SHORTS_DOWN_STOP_Pos) /*!< Bit mask of DOWN_STOP field. */ +#define LPCOMP_SHORTS_DOWN_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define LPCOMP_SHORTS_DOWN_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 1 : Shortcut between RADY event and STOP task. */ +#define LPCOMP_SHORTS_READY_STOP_Pos (1UL) /*!< Position of READY_STOP field. */ +#define LPCOMP_SHORTS_READY_STOP_Msk (0x1UL << LPCOMP_SHORTS_READY_STOP_Pos) /*!< Bit mask of READY_STOP field. */ +#define LPCOMP_SHORTS_READY_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define LPCOMP_SHORTS_READY_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 0 : Shortcut between READY event and SAMPLE task. */ +#define LPCOMP_SHORTS_READY_SAMPLE_Pos (0UL) /*!< Position of READY_SAMPLE field. */ +#define LPCOMP_SHORTS_READY_SAMPLE_Msk (0x1UL << LPCOMP_SHORTS_READY_SAMPLE_Pos) /*!< Bit mask of READY_SAMPLE field. */ +#define LPCOMP_SHORTS_READY_SAMPLE_Disabled (0UL) /*!< Shortcut disabled. */ +#define LPCOMP_SHORTS_READY_SAMPLE_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: LPCOMP_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 3 : Enable interrupt on CROSS event. */ +#define LPCOMP_INTENSET_CROSS_Pos (3UL) /*!< Position of CROSS field. */ +#define LPCOMP_INTENSET_CROSS_Msk (0x1UL << LPCOMP_INTENSET_CROSS_Pos) /*!< Bit mask of CROSS field. */ +#define LPCOMP_INTENSET_CROSS_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENSET_CROSS_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENSET_CROSS_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 2 : Enable interrupt on UP event. */ +#define LPCOMP_INTENSET_UP_Pos (2UL) /*!< Position of UP field. */ +#define LPCOMP_INTENSET_UP_Msk (0x1UL << LPCOMP_INTENSET_UP_Pos) /*!< Bit mask of UP field. */ +#define LPCOMP_INTENSET_UP_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENSET_UP_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENSET_UP_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on DOWN event. */ +#define LPCOMP_INTENSET_DOWN_Pos (1UL) /*!< Position of DOWN field. */ +#define LPCOMP_INTENSET_DOWN_Msk (0x1UL << LPCOMP_INTENSET_DOWN_Pos) /*!< Bit mask of DOWN field. */ +#define LPCOMP_INTENSET_DOWN_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENSET_DOWN_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENSET_DOWN_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on READY event. */ +#define LPCOMP_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */ +#define LPCOMP_INTENSET_READY_Msk (0x1UL << LPCOMP_INTENSET_READY_Pos) /*!< Bit mask of READY field. */ +#define LPCOMP_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: LPCOMP_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 3 : Disable interrupt on CROSS event. */ +#define LPCOMP_INTENCLR_CROSS_Pos (3UL) /*!< Position of CROSS field. */ +#define LPCOMP_INTENCLR_CROSS_Msk (0x1UL << LPCOMP_INTENCLR_CROSS_Pos) /*!< Bit mask of CROSS field. */ +#define LPCOMP_INTENCLR_CROSS_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENCLR_CROSS_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENCLR_CROSS_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 2 : Disable interrupt on UP event. */ +#define LPCOMP_INTENCLR_UP_Pos (2UL) /*!< Position of UP field. */ +#define LPCOMP_INTENCLR_UP_Msk (0x1UL << LPCOMP_INTENCLR_UP_Pos) /*!< Bit mask of UP field. */ +#define LPCOMP_INTENCLR_UP_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENCLR_UP_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENCLR_UP_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on DOWN event. */ +#define LPCOMP_INTENCLR_DOWN_Pos (1UL) /*!< Position of DOWN field. */ +#define LPCOMP_INTENCLR_DOWN_Msk (0x1UL << LPCOMP_INTENCLR_DOWN_Pos) /*!< Bit mask of DOWN field. */ +#define LPCOMP_INTENCLR_DOWN_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENCLR_DOWN_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENCLR_DOWN_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on READY event. */ +#define LPCOMP_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */ +#define LPCOMP_INTENCLR_READY_Msk (0x1UL << LPCOMP_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */ +#define LPCOMP_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: LPCOMP_RESULT */ +/* Description: Result of last compare. */ + +/* Bit 0 : Result of last compare. Decision point SAMPLE task. */ +#define LPCOMP_RESULT_RESULT_Pos (0UL) /*!< Position of RESULT field. */ +#define LPCOMP_RESULT_RESULT_Msk (0x1UL << LPCOMP_RESULT_RESULT_Pos) /*!< Bit mask of RESULT field. */ +#define LPCOMP_RESULT_RESULT_Bellow (0UL) /*!< Input voltage is bellow the reference threshold. */ +#define LPCOMP_RESULT_RESULT_Above (1UL) /*!< Input voltage is above the reference threshold. */ + +/* Register: LPCOMP_ENABLE */ +/* Description: Enable the LPCOMP. */ + +/* Bits 1..0 : Enable or disable LPCOMP. */ +#define LPCOMP_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define LPCOMP_ENABLE_ENABLE_Msk (0x3UL << LPCOMP_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define LPCOMP_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled LPCOMP. */ +#define LPCOMP_ENABLE_ENABLE_Enabled (0x01UL) /*!< Enable LPCOMP. */ + +/* Register: LPCOMP_PSEL */ +/* Description: Input pin select. */ + +/* Bits 2..0 : Analog input pin select. */ +#define LPCOMP_PSEL_PSEL_Pos (0UL) /*!< Position of PSEL field. */ +#define LPCOMP_PSEL_PSEL_Msk (0x7UL << LPCOMP_PSEL_PSEL_Pos) /*!< Bit mask of PSEL field. */ +#define LPCOMP_PSEL_PSEL_AnalogInput0 (0UL) /*!< Use analog input 0 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput1 (1UL) /*!< Use analog input 1 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput2 (2UL) /*!< Use analog input 2 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput3 (3UL) /*!< Use analog input 3 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput4 (4UL) /*!< Use analog input 4 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput5 (5UL) /*!< Use analog input 5 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput6 (6UL) /*!< Use analog input 6 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput7 (7UL) /*!< Use analog input 7 as analog input. */ + +/* Register: LPCOMP_REFSEL */ +/* Description: Reference select. */ + +/* Bits 2..0 : Reference select. */ +#define LPCOMP_REFSEL_REFSEL_Pos (0UL) /*!< Position of REFSEL field. */ +#define LPCOMP_REFSEL_REFSEL_Msk (0x7UL << LPCOMP_REFSEL_REFSEL_Pos) /*!< Bit mask of REFSEL field. */ +#define LPCOMP_REFSEL_REFSEL_SupplyOneEighthPrescaling (0UL) /*!< Use supply with a 1/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_SupplyTwoEighthsPrescaling (1UL) /*!< Use supply with a 2/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_SupplyThreeEighthsPrescaling (2UL) /*!< Use supply with a 3/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_SupplyFourEighthsPrescaling (3UL) /*!< Use supply with a 4/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_SupplyFiveEighthsPrescaling (4UL) /*!< Use supply with a 5/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_SupplySixEighthsPrescaling (5UL) /*!< Use supply with a 6/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_SupplySevenEighthsPrescaling (6UL) /*!< Use supply with a 7/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_ARef (7UL) /*!< Use external analog reference as reference. */ + +/* Register: LPCOMP_EXTREFSEL */ +/* Description: External reference select. */ + +/* Bit 0 : External analog reference pin selection. */ +#define LPCOMP_EXTREFSEL_EXTREFSEL_Pos (0UL) /*!< Position of EXTREFSEL field. */ +#define LPCOMP_EXTREFSEL_EXTREFSEL_Msk (0x1UL << LPCOMP_EXTREFSEL_EXTREFSEL_Pos) /*!< Bit mask of EXTREFSEL field. */ +#define LPCOMP_EXTREFSEL_EXTREFSEL_AnalogReference0 (0UL) /*!< Use analog reference 0 as reference. */ +#define LPCOMP_EXTREFSEL_EXTREFSEL_AnalogReference1 (1UL) /*!< Use analog reference 1 as reference. */ + +/* Register: LPCOMP_ANADETECT */ +/* Description: Analog detect configuration. */ + +/* Bits 1..0 : Analog detect configuration. */ +#define LPCOMP_ANADETECT_ANADETECT_Pos (0UL) /*!< Position of ANADETECT field. */ +#define LPCOMP_ANADETECT_ANADETECT_Msk (0x3UL << LPCOMP_ANADETECT_ANADETECT_Pos) /*!< Bit mask of ANADETECT field. */ +#define LPCOMP_ANADETECT_ANADETECT_Cross (0UL) /*!< Generate ANADETEC on crossing, both upwards and downwards crossing. */ +#define LPCOMP_ANADETECT_ANADETECT_Up (1UL) /*!< Generate ANADETEC on upwards crossing only. */ +#define LPCOMP_ANADETECT_ANADETECT_Down (2UL) /*!< Generate ANADETEC on downwards crossing only. */ + +/* Register: LPCOMP_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define LPCOMP_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define LPCOMP_POWER_POWER_Msk (0x1UL << LPCOMP_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define LPCOMP_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define LPCOMP_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: MPU */ +/* Description: Memory Protection Unit. */ + +/* Register: MPU_PERR0 */ +/* Description: Configuration of peripherals in mpu regions. */ + +/* Bit 31 : PPI region configuration. */ +#define MPU_PERR0_PPI_Pos (31UL) /*!< Position of PPI field. */ +#define MPU_PERR0_PPI_Msk (0x1UL << MPU_PERR0_PPI_Pos) /*!< Bit mask of PPI field. */ +#define MPU_PERR0_PPI_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_PPI_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 30 : NVMC region configuration. */ +#define MPU_PERR0_NVMC_Pos (30UL) /*!< Position of NVMC field. */ +#define MPU_PERR0_NVMC_Msk (0x1UL << MPU_PERR0_NVMC_Pos) /*!< Bit mask of NVMC field. */ +#define MPU_PERR0_NVMC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_NVMC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 19 : LPCOMP region configuration. */ +#define MPU_PERR0_LPCOMP_Pos (19UL) /*!< Position of LPCOMP field. */ +#define MPU_PERR0_LPCOMP_Msk (0x1UL << MPU_PERR0_LPCOMP_Pos) /*!< Bit mask of LPCOMP field. */ +#define MPU_PERR0_LPCOMP_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_LPCOMP_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 18 : QDEC region configuration. */ +#define MPU_PERR0_QDEC_Pos (18UL) /*!< Position of QDEC field. */ +#define MPU_PERR0_QDEC_Msk (0x1UL << MPU_PERR0_QDEC_Pos) /*!< Bit mask of QDEC field. */ +#define MPU_PERR0_QDEC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_QDEC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 17 : RTC1 region configuration. */ +#define MPU_PERR0_RTC1_Pos (17UL) /*!< Position of RTC1 field. */ +#define MPU_PERR0_RTC1_Msk (0x1UL << MPU_PERR0_RTC1_Pos) /*!< Bit mask of RTC1 field. */ +#define MPU_PERR0_RTC1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_RTC1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 16 : WDT region configuration. */ +#define MPU_PERR0_WDT_Pos (16UL) /*!< Position of WDT field. */ +#define MPU_PERR0_WDT_Msk (0x1UL << MPU_PERR0_WDT_Pos) /*!< Bit mask of WDT field. */ +#define MPU_PERR0_WDT_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_WDT_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 15 : CCM and AAR region configuration. */ +#define MPU_PERR0_CCM_AAR_Pos (15UL) /*!< Position of CCM_AAR field. */ +#define MPU_PERR0_CCM_AAR_Msk (0x1UL << MPU_PERR0_CCM_AAR_Pos) /*!< Bit mask of CCM_AAR field. */ +#define MPU_PERR0_CCM_AAR_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_CCM_AAR_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 14 : ECB region configuration. */ +#define MPU_PERR0_ECB_Pos (14UL) /*!< Position of ECB field. */ +#define MPU_PERR0_ECB_Msk (0x1UL << MPU_PERR0_ECB_Pos) /*!< Bit mask of ECB field. */ +#define MPU_PERR0_ECB_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_ECB_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 13 : RNG region configuration. */ +#define MPU_PERR0_RNG_Pos (13UL) /*!< Position of RNG field. */ +#define MPU_PERR0_RNG_Msk (0x1UL << MPU_PERR0_RNG_Pos) /*!< Bit mask of RNG field. */ +#define MPU_PERR0_RNG_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_RNG_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 12 : TEMP region configuration. */ +#define MPU_PERR0_TEMP_Pos (12UL) /*!< Position of TEMP field. */ +#define MPU_PERR0_TEMP_Msk (0x1UL << MPU_PERR0_TEMP_Pos) /*!< Bit mask of TEMP field. */ +#define MPU_PERR0_TEMP_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_TEMP_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 11 : RTC0 region configuration. */ +#define MPU_PERR0_RTC0_Pos (11UL) /*!< Position of RTC0 field. */ +#define MPU_PERR0_RTC0_Msk (0x1UL << MPU_PERR0_RTC0_Pos) /*!< Bit mask of RTC0 field. */ +#define MPU_PERR0_RTC0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_RTC0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 10 : TIMER2 region configuration. */ +#define MPU_PERR0_TIMER2_Pos (10UL) /*!< Position of TIMER2 field. */ +#define MPU_PERR0_TIMER2_Msk (0x1UL << MPU_PERR0_TIMER2_Pos) /*!< Bit mask of TIMER2 field. */ +#define MPU_PERR0_TIMER2_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_TIMER2_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 9 : TIMER1 region configuration. */ +#define MPU_PERR0_TIMER1_Pos (9UL) /*!< Position of TIMER1 field. */ +#define MPU_PERR0_TIMER1_Msk (0x1UL << MPU_PERR0_TIMER1_Pos) /*!< Bit mask of TIMER1 field. */ +#define MPU_PERR0_TIMER1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_TIMER1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 8 : TIMER0 region configuration. */ +#define MPU_PERR0_TIMER0_Pos (8UL) /*!< Position of TIMER0 field. */ +#define MPU_PERR0_TIMER0_Msk (0x1UL << MPU_PERR0_TIMER0_Pos) /*!< Bit mask of TIMER0 field. */ +#define MPU_PERR0_TIMER0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_TIMER0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 7 : ADC region configuration. */ +#define MPU_PERR0_ADC_Pos (7UL) /*!< Position of ADC field. */ +#define MPU_PERR0_ADC_Msk (0x1UL << MPU_PERR0_ADC_Pos) /*!< Bit mask of ADC field. */ +#define MPU_PERR0_ADC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_ADC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 6 : GPIOTE region configuration. */ +#define MPU_PERR0_GPIOTE_Pos (6UL) /*!< Position of GPIOTE field. */ +#define MPU_PERR0_GPIOTE_Msk (0x1UL << MPU_PERR0_GPIOTE_Pos) /*!< Bit mask of GPIOTE field. */ +#define MPU_PERR0_GPIOTE_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_GPIOTE_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 4 : SPI1 and TWI1 region configuration. */ +#define MPU_PERR0_SPI1_TWI1_Pos (4UL) /*!< Position of SPI1_TWI1 field. */ +#define MPU_PERR0_SPI1_TWI1_Msk (0x1UL << MPU_PERR0_SPI1_TWI1_Pos) /*!< Bit mask of SPI1_TWI1 field. */ +#define MPU_PERR0_SPI1_TWI1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_SPI1_TWI1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 3 : SPI0 and TWI0 region configuration. */ +#define MPU_PERR0_SPI0_TWI0_Pos (3UL) /*!< Position of SPI0_TWI0 field. */ +#define MPU_PERR0_SPI0_TWI0_Msk (0x1UL << MPU_PERR0_SPI0_TWI0_Pos) /*!< Bit mask of SPI0_TWI0 field. */ +#define MPU_PERR0_SPI0_TWI0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_SPI0_TWI0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 2 : UART0 region configuration. */ +#define MPU_PERR0_UART0_Pos (2UL) /*!< Position of UART0 field. */ +#define MPU_PERR0_UART0_Msk (0x1UL << MPU_PERR0_UART0_Pos) /*!< Bit mask of UART0 field. */ +#define MPU_PERR0_UART0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_UART0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 1 : RADIO region configuration. */ +#define MPU_PERR0_RADIO_Pos (1UL) /*!< Position of RADIO field. */ +#define MPU_PERR0_RADIO_Msk (0x1UL << MPU_PERR0_RADIO_Pos) /*!< Bit mask of RADIO field. */ +#define MPU_PERR0_RADIO_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_RADIO_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 0 : POWER_CLOCK region configuration. */ +#define MPU_PERR0_POWER_CLOCK_Pos (0UL) /*!< Position of POWER_CLOCK field. */ +#define MPU_PERR0_POWER_CLOCK_Msk (0x1UL << MPU_PERR0_POWER_CLOCK_Pos) /*!< Bit mask of POWER_CLOCK field. */ +#define MPU_PERR0_POWER_CLOCK_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_POWER_CLOCK_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Register: MPU_PROTENSET0 */ +/* Description: Erase and write protection bit enable set register. */ + +/* Bit 31 : Protection enable for region 31. */ +#define MPU_PROTENSET0_PROTREG31_Pos (31UL) /*!< Position of PROTREG31 field. */ +#define MPU_PROTENSET0_PROTREG31_Msk (0x1UL << MPU_PROTENSET0_PROTREG31_Pos) /*!< Bit mask of PROTREG31 field. */ +#define MPU_PROTENSET0_PROTREG31_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG31_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG31_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 30 : Protection enable for region 30. */ +#define MPU_PROTENSET0_PROTREG30_Pos (30UL) /*!< Position of PROTREG30 field. */ +#define MPU_PROTENSET0_PROTREG30_Msk (0x1UL << MPU_PROTENSET0_PROTREG30_Pos) /*!< Bit mask of PROTREG30 field. */ +#define MPU_PROTENSET0_PROTREG30_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG30_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG30_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 29 : Protection enable for region 29. */ +#define MPU_PROTENSET0_PROTREG29_Pos (29UL) /*!< Position of PROTREG29 field. */ +#define MPU_PROTENSET0_PROTREG29_Msk (0x1UL << MPU_PROTENSET0_PROTREG29_Pos) /*!< Bit mask of PROTREG29 field. */ +#define MPU_PROTENSET0_PROTREG29_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG29_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG29_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 28 : Protection enable for region 28. */ +#define MPU_PROTENSET0_PROTREG28_Pos (28UL) /*!< Position of PROTREG28 field. */ +#define MPU_PROTENSET0_PROTREG28_Msk (0x1UL << MPU_PROTENSET0_PROTREG28_Pos) /*!< Bit mask of PROTREG28 field. */ +#define MPU_PROTENSET0_PROTREG28_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG28_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG28_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 27 : Protection enable for region 27. */ +#define MPU_PROTENSET0_PROTREG27_Pos (27UL) /*!< Position of PROTREG27 field. */ +#define MPU_PROTENSET0_PROTREG27_Msk (0x1UL << MPU_PROTENSET0_PROTREG27_Pos) /*!< Bit mask of PROTREG27 field. */ +#define MPU_PROTENSET0_PROTREG27_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG27_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG27_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 26 : Protection enable for region 26. */ +#define MPU_PROTENSET0_PROTREG26_Pos (26UL) /*!< Position of PROTREG26 field. */ +#define MPU_PROTENSET0_PROTREG26_Msk (0x1UL << MPU_PROTENSET0_PROTREG26_Pos) /*!< Bit mask of PROTREG26 field. */ +#define MPU_PROTENSET0_PROTREG26_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG26_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG26_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 25 : Protection enable for region 25. */ +#define MPU_PROTENSET0_PROTREG25_Pos (25UL) /*!< Position of PROTREG25 field. */ +#define MPU_PROTENSET0_PROTREG25_Msk (0x1UL << MPU_PROTENSET0_PROTREG25_Pos) /*!< Bit mask of PROTREG25 field. */ +#define MPU_PROTENSET0_PROTREG25_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG25_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG25_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 24 : Protection enable for region 24. */ +#define MPU_PROTENSET0_PROTREG24_Pos (24UL) /*!< Position of PROTREG24 field. */ +#define MPU_PROTENSET0_PROTREG24_Msk (0x1UL << MPU_PROTENSET0_PROTREG24_Pos) /*!< Bit mask of PROTREG24 field. */ +#define MPU_PROTENSET0_PROTREG24_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG24_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG24_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 23 : Protection enable for region 23. */ +#define MPU_PROTENSET0_PROTREG23_Pos (23UL) /*!< Position of PROTREG23 field. */ +#define MPU_PROTENSET0_PROTREG23_Msk (0x1UL << MPU_PROTENSET0_PROTREG23_Pos) /*!< Bit mask of PROTREG23 field. */ +#define MPU_PROTENSET0_PROTREG23_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG23_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG23_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 22 : Protection enable for region 22. */ +#define MPU_PROTENSET0_PROTREG22_Pos (22UL) /*!< Position of PROTREG22 field. */ +#define MPU_PROTENSET0_PROTREG22_Msk (0x1UL << MPU_PROTENSET0_PROTREG22_Pos) /*!< Bit mask of PROTREG22 field. */ +#define MPU_PROTENSET0_PROTREG22_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG22_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG22_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 21 : Protection enable for region 21. */ +#define MPU_PROTENSET0_PROTREG21_Pos (21UL) /*!< Position of PROTREG21 field. */ +#define MPU_PROTENSET0_PROTREG21_Msk (0x1UL << MPU_PROTENSET0_PROTREG21_Pos) /*!< Bit mask of PROTREG21 field. */ +#define MPU_PROTENSET0_PROTREG21_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG21_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG21_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 20 : Protection enable for region 20. */ +#define MPU_PROTENSET0_PROTREG20_Pos (20UL) /*!< Position of PROTREG20 field. */ +#define MPU_PROTENSET0_PROTREG20_Msk (0x1UL << MPU_PROTENSET0_PROTREG20_Pos) /*!< Bit mask of PROTREG20 field. */ +#define MPU_PROTENSET0_PROTREG20_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG20_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG20_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 19 : Protection enable for region 19. */ +#define MPU_PROTENSET0_PROTREG19_Pos (19UL) /*!< Position of PROTREG19 field. */ +#define MPU_PROTENSET0_PROTREG19_Msk (0x1UL << MPU_PROTENSET0_PROTREG19_Pos) /*!< Bit mask of PROTREG19 field. */ +#define MPU_PROTENSET0_PROTREG19_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG19_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG19_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 18 : Protection enable for region 18. */ +#define MPU_PROTENSET0_PROTREG18_Pos (18UL) /*!< Position of PROTREG18 field. */ +#define MPU_PROTENSET0_PROTREG18_Msk (0x1UL << MPU_PROTENSET0_PROTREG18_Pos) /*!< Bit mask of PROTREG18 field. */ +#define MPU_PROTENSET0_PROTREG18_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG18_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG18_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 17 : Protection enable for region 17. */ +#define MPU_PROTENSET0_PROTREG17_Pos (17UL) /*!< Position of PROTREG17 field. */ +#define MPU_PROTENSET0_PROTREG17_Msk (0x1UL << MPU_PROTENSET0_PROTREG17_Pos) /*!< Bit mask of PROTREG17 field. */ +#define MPU_PROTENSET0_PROTREG17_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG17_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG17_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 16 : Protection enable for region 16. */ +#define MPU_PROTENSET0_PROTREG16_Pos (16UL) /*!< Position of PROTREG16 field. */ +#define MPU_PROTENSET0_PROTREG16_Msk (0x1UL << MPU_PROTENSET0_PROTREG16_Pos) /*!< Bit mask of PROTREG16 field. */ +#define MPU_PROTENSET0_PROTREG16_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG16_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG16_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 15 : Protection enable for region 15. */ +#define MPU_PROTENSET0_PROTREG15_Pos (15UL) /*!< Position of PROTREG15 field. */ +#define MPU_PROTENSET0_PROTREG15_Msk (0x1UL << MPU_PROTENSET0_PROTREG15_Pos) /*!< Bit mask of PROTREG15 field. */ +#define MPU_PROTENSET0_PROTREG15_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG15_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG15_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 14 : Protection enable for region 14. */ +#define MPU_PROTENSET0_PROTREG14_Pos (14UL) /*!< Position of PROTREG14 field. */ +#define MPU_PROTENSET0_PROTREG14_Msk (0x1UL << MPU_PROTENSET0_PROTREG14_Pos) /*!< Bit mask of PROTREG14 field. */ +#define MPU_PROTENSET0_PROTREG14_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG14_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG14_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 13 : Protection enable for region 13. */ +#define MPU_PROTENSET0_PROTREG13_Pos (13UL) /*!< Position of PROTREG13 field. */ +#define MPU_PROTENSET0_PROTREG13_Msk (0x1UL << MPU_PROTENSET0_PROTREG13_Pos) /*!< Bit mask of PROTREG13 field. */ +#define MPU_PROTENSET0_PROTREG13_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG13_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG13_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 12 : Protection enable for region 12. */ +#define MPU_PROTENSET0_PROTREG12_Pos (12UL) /*!< Position of PROTREG12 field. */ +#define MPU_PROTENSET0_PROTREG12_Msk (0x1UL << MPU_PROTENSET0_PROTREG12_Pos) /*!< Bit mask of PROTREG12 field. */ +#define MPU_PROTENSET0_PROTREG12_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG12_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG12_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 11 : Protection enable for region 11. */ +#define MPU_PROTENSET0_PROTREG11_Pos (11UL) /*!< Position of PROTREG11 field. */ +#define MPU_PROTENSET0_PROTREG11_Msk (0x1UL << MPU_PROTENSET0_PROTREG11_Pos) /*!< Bit mask of PROTREG11 field. */ +#define MPU_PROTENSET0_PROTREG11_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG11_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG11_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 10 : Protection enable for region 10. */ +#define MPU_PROTENSET0_PROTREG10_Pos (10UL) /*!< Position of PROTREG10 field. */ +#define MPU_PROTENSET0_PROTREG10_Msk (0x1UL << MPU_PROTENSET0_PROTREG10_Pos) /*!< Bit mask of PROTREG10 field. */ +#define MPU_PROTENSET0_PROTREG10_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG10_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG10_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 9 : Protection enable for region 9. */ +#define MPU_PROTENSET0_PROTREG9_Pos (9UL) /*!< Position of PROTREG9 field. */ +#define MPU_PROTENSET0_PROTREG9_Msk (0x1UL << MPU_PROTENSET0_PROTREG9_Pos) /*!< Bit mask of PROTREG9 field. */ +#define MPU_PROTENSET0_PROTREG9_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG9_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG9_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 8 : Protection enable for region 8. */ +#define MPU_PROTENSET0_PROTREG8_Pos (8UL) /*!< Position of PROTREG8 field. */ +#define MPU_PROTENSET0_PROTREG8_Msk (0x1UL << MPU_PROTENSET0_PROTREG8_Pos) /*!< Bit mask of PROTREG8 field. */ +#define MPU_PROTENSET0_PROTREG8_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG8_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG8_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 7 : Protection enable for region 7. */ +#define MPU_PROTENSET0_PROTREG7_Pos (7UL) /*!< Position of PROTREG7 field. */ +#define MPU_PROTENSET0_PROTREG7_Msk (0x1UL << MPU_PROTENSET0_PROTREG7_Pos) /*!< Bit mask of PROTREG7 field. */ +#define MPU_PROTENSET0_PROTREG7_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG7_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG7_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 6 : Protection enable for region 6. */ +#define MPU_PROTENSET0_PROTREG6_Pos (6UL) /*!< Position of PROTREG6 field. */ +#define MPU_PROTENSET0_PROTREG6_Msk (0x1UL << MPU_PROTENSET0_PROTREG6_Pos) /*!< Bit mask of PROTREG6 field. */ +#define MPU_PROTENSET0_PROTREG6_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG6_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG6_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 5 : Protection enable for region 5. */ +#define MPU_PROTENSET0_PROTREG5_Pos (5UL) /*!< Position of PROTREG5 field. */ +#define MPU_PROTENSET0_PROTREG5_Msk (0x1UL << MPU_PROTENSET0_PROTREG5_Pos) /*!< Bit mask of PROTREG5 field. */ +#define MPU_PROTENSET0_PROTREG5_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG5_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG5_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 4 : Protection enable for region 4. */ +#define MPU_PROTENSET0_PROTREG4_Pos (4UL) /*!< Position of PROTREG4 field. */ +#define MPU_PROTENSET0_PROTREG4_Msk (0x1UL << MPU_PROTENSET0_PROTREG4_Pos) /*!< Bit mask of PROTREG4 field. */ +#define MPU_PROTENSET0_PROTREG4_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG4_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG4_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 3 : Protection enable for region 3. */ +#define MPU_PROTENSET0_PROTREG3_Pos (3UL) /*!< Position of PROTREG3 field. */ +#define MPU_PROTENSET0_PROTREG3_Msk (0x1UL << MPU_PROTENSET0_PROTREG3_Pos) /*!< Bit mask of PROTREG3 field. */ +#define MPU_PROTENSET0_PROTREG3_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG3_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG3_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 2 : Protection enable for region 2. */ +#define MPU_PROTENSET0_PROTREG2_Pos (2UL) /*!< Position of PROTREG2 field. */ +#define MPU_PROTENSET0_PROTREG2_Msk (0x1UL << MPU_PROTENSET0_PROTREG2_Pos) /*!< Bit mask of PROTREG2 field. */ +#define MPU_PROTENSET0_PROTREG2_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG2_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG2_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 1 : Protection enable for region 1. */ +#define MPU_PROTENSET0_PROTREG1_Pos (1UL) /*!< Position of PROTREG1 field. */ +#define MPU_PROTENSET0_PROTREG1_Msk (0x1UL << MPU_PROTENSET0_PROTREG1_Pos) /*!< Bit mask of PROTREG1 field. */ +#define MPU_PROTENSET0_PROTREG1_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG1_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG1_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 0 : Protection enable for region 0. */ +#define MPU_PROTENSET0_PROTREG0_Pos (0UL) /*!< Position of PROTREG0 field. */ +#define MPU_PROTENSET0_PROTREG0_Msk (0x1UL << MPU_PROTENSET0_PROTREG0_Pos) /*!< Bit mask of PROTREG0 field. */ +#define MPU_PROTENSET0_PROTREG0_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG0_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG0_Set (1UL) /*!< Enable protection on write. */ + +/* Register: MPU_PROTENSET1 */ +/* Description: Erase and write protection bit enable set register. */ + +/* Bit 31 : Protection enable for region 63. */ +#define MPU_PROTENSET1_PROTREG63_Pos (31UL) /*!< Position of PROTREG63 field. */ +#define MPU_PROTENSET1_PROTREG63_Msk (0x1UL << MPU_PROTENSET1_PROTREG63_Pos) /*!< Bit mask of PROTREG63 field. */ +#define MPU_PROTENSET1_PROTREG63_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG63_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG63_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 30 : Protection enable for region 62. */ +#define MPU_PROTENSET1_PROTREG62_Pos (30UL) /*!< Position of PROTREG62 field. */ +#define MPU_PROTENSET1_PROTREG62_Msk (0x1UL << MPU_PROTENSET1_PROTREG62_Pos) /*!< Bit mask of PROTREG62 field. */ +#define MPU_PROTENSET1_PROTREG62_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG62_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG62_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 29 : Protection enable for region 61. */ +#define MPU_PROTENSET1_PROTREG61_Pos (29UL) /*!< Position of PROTREG61 field. */ +#define MPU_PROTENSET1_PROTREG61_Msk (0x1UL << MPU_PROTENSET1_PROTREG61_Pos) /*!< Bit mask of PROTREG61 field. */ +#define MPU_PROTENSET1_PROTREG61_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG61_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG61_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 28 : Protection enable for region 60. */ +#define MPU_PROTENSET1_PROTREG60_Pos (28UL) /*!< Position of PROTREG60 field. */ +#define MPU_PROTENSET1_PROTREG60_Msk (0x1UL << MPU_PROTENSET1_PROTREG60_Pos) /*!< Bit mask of PROTREG60 field. */ +#define MPU_PROTENSET1_PROTREG60_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG60_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG60_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 27 : Protection enable for region 59. */ +#define MPU_PROTENSET1_PROTREG59_Pos (27UL) /*!< Position of PROTREG59 field. */ +#define MPU_PROTENSET1_PROTREG59_Msk (0x1UL << MPU_PROTENSET1_PROTREG59_Pos) /*!< Bit mask of PROTREG59 field. */ +#define MPU_PROTENSET1_PROTREG59_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG59_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG59_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 26 : Protection enable for region 58. */ +#define MPU_PROTENSET1_PROTREG58_Pos (26UL) /*!< Position of PROTREG58 field. */ +#define MPU_PROTENSET1_PROTREG58_Msk (0x1UL << MPU_PROTENSET1_PROTREG58_Pos) /*!< Bit mask of PROTREG58 field. */ +#define MPU_PROTENSET1_PROTREG58_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG58_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG58_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 25 : Protection enable for region 57. */ +#define MPU_PROTENSET1_PROTREG57_Pos (25UL) /*!< Position of PROTREG57 field. */ +#define MPU_PROTENSET1_PROTREG57_Msk (0x1UL << MPU_PROTENSET1_PROTREG57_Pos) /*!< Bit mask of PROTREG57 field. */ +#define MPU_PROTENSET1_PROTREG57_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG57_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG57_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 24 : Protection enable for region 56. */ +#define MPU_PROTENSET1_PROTREG56_Pos (24UL) /*!< Position of PROTREG56 field. */ +#define MPU_PROTENSET1_PROTREG56_Msk (0x1UL << MPU_PROTENSET1_PROTREG56_Pos) /*!< Bit mask of PROTREG56 field. */ +#define MPU_PROTENSET1_PROTREG56_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG56_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG56_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 23 : Protection enable for region 55. */ +#define MPU_PROTENSET1_PROTREG55_Pos (23UL) /*!< Position of PROTREG55 field. */ +#define MPU_PROTENSET1_PROTREG55_Msk (0x1UL << MPU_PROTENSET1_PROTREG55_Pos) /*!< Bit mask of PROTREG55 field. */ +#define MPU_PROTENSET1_PROTREG55_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG55_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG55_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 22 : Protection enable for region 54. */ +#define MPU_PROTENSET1_PROTREG54_Pos (22UL) /*!< Position of PROTREG54 field. */ +#define MPU_PROTENSET1_PROTREG54_Msk (0x1UL << MPU_PROTENSET1_PROTREG54_Pos) /*!< Bit mask of PROTREG54 field. */ +#define MPU_PROTENSET1_PROTREG54_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG54_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG54_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 21 : Protection enable for region 53. */ +#define MPU_PROTENSET1_PROTREG53_Pos (21UL) /*!< Position of PROTREG53 field. */ +#define MPU_PROTENSET1_PROTREG53_Msk (0x1UL << MPU_PROTENSET1_PROTREG53_Pos) /*!< Bit mask of PROTREG53 field. */ +#define MPU_PROTENSET1_PROTREG53_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG53_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG53_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 20 : Protection enable for region 52. */ +#define MPU_PROTENSET1_PROTREG52_Pos (20UL) /*!< Position of PROTREG52 field. */ +#define MPU_PROTENSET1_PROTREG52_Msk (0x1UL << MPU_PROTENSET1_PROTREG52_Pos) /*!< Bit mask of PROTREG52 field. */ +#define MPU_PROTENSET1_PROTREG52_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG52_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG52_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 19 : Protection enable for region 51. */ +#define MPU_PROTENSET1_PROTREG51_Pos (19UL) /*!< Position of PROTREG51 field. */ +#define MPU_PROTENSET1_PROTREG51_Msk (0x1UL << MPU_PROTENSET1_PROTREG51_Pos) /*!< Bit mask of PROTREG51 field. */ +#define MPU_PROTENSET1_PROTREG51_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG51_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG51_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 18 : Protection enable for region 50. */ +#define MPU_PROTENSET1_PROTREG50_Pos (18UL) /*!< Position of PROTREG50 field. */ +#define MPU_PROTENSET1_PROTREG50_Msk (0x1UL << MPU_PROTENSET1_PROTREG50_Pos) /*!< Bit mask of PROTREG50 field. */ +#define MPU_PROTENSET1_PROTREG50_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG50_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG50_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 17 : Protection enable for region 49. */ +#define MPU_PROTENSET1_PROTREG49_Pos (17UL) /*!< Position of PROTREG49 field. */ +#define MPU_PROTENSET1_PROTREG49_Msk (0x1UL << MPU_PROTENSET1_PROTREG49_Pos) /*!< Bit mask of PROTREG49 field. */ +#define MPU_PROTENSET1_PROTREG49_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG49_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG49_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 16 : Protection enable for region 48. */ +#define MPU_PROTENSET1_PROTREG48_Pos (16UL) /*!< Position of PROTREG48 field. */ +#define MPU_PROTENSET1_PROTREG48_Msk (0x1UL << MPU_PROTENSET1_PROTREG48_Pos) /*!< Bit mask of PROTREG48 field. */ +#define MPU_PROTENSET1_PROTREG48_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG48_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG48_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 15 : Protection enable for region 47. */ +#define MPU_PROTENSET1_PROTREG47_Pos (15UL) /*!< Position of PROTREG47 field. */ +#define MPU_PROTENSET1_PROTREG47_Msk (0x1UL << MPU_PROTENSET1_PROTREG47_Pos) /*!< Bit mask of PROTREG47 field. */ +#define MPU_PROTENSET1_PROTREG47_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG47_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG47_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 14 : Protection enable for region 46. */ +#define MPU_PROTENSET1_PROTREG46_Pos (14UL) /*!< Position of PROTREG46 field. */ +#define MPU_PROTENSET1_PROTREG46_Msk (0x1UL << MPU_PROTENSET1_PROTREG46_Pos) /*!< Bit mask of PROTREG46 field. */ +#define MPU_PROTENSET1_PROTREG46_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG46_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG46_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 13 : Protection enable for region 45. */ +#define MPU_PROTENSET1_PROTREG45_Pos (13UL) /*!< Position of PROTREG45 field. */ +#define MPU_PROTENSET1_PROTREG45_Msk (0x1UL << MPU_PROTENSET1_PROTREG45_Pos) /*!< Bit mask of PROTREG45 field. */ +#define MPU_PROTENSET1_PROTREG45_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG45_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG45_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 12 : Protection enable for region 44. */ +#define MPU_PROTENSET1_PROTREG44_Pos (12UL) /*!< Position of PROTREG44 field. */ +#define MPU_PROTENSET1_PROTREG44_Msk (0x1UL << MPU_PROTENSET1_PROTREG44_Pos) /*!< Bit mask of PROTREG44 field. */ +#define MPU_PROTENSET1_PROTREG44_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG44_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG44_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 11 : Protection enable for region 43. */ +#define MPU_PROTENSET1_PROTREG43_Pos (11UL) /*!< Position of PROTREG43 field. */ +#define MPU_PROTENSET1_PROTREG43_Msk (0x1UL << MPU_PROTENSET1_PROTREG43_Pos) /*!< Bit mask of PROTREG43 field. */ +#define MPU_PROTENSET1_PROTREG43_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG43_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG43_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 10 : Protection enable for region 42. */ +#define MPU_PROTENSET1_PROTREG42_Pos (10UL) /*!< Position of PROTREG42 field. */ +#define MPU_PROTENSET1_PROTREG42_Msk (0x1UL << MPU_PROTENSET1_PROTREG42_Pos) /*!< Bit mask of PROTREG42 field. */ +#define MPU_PROTENSET1_PROTREG42_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG42_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG42_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 9 : Protection enable for region 41. */ +#define MPU_PROTENSET1_PROTREG41_Pos (9UL) /*!< Position of PROTREG41 field. */ +#define MPU_PROTENSET1_PROTREG41_Msk (0x1UL << MPU_PROTENSET1_PROTREG41_Pos) /*!< Bit mask of PROTREG41 field. */ +#define MPU_PROTENSET1_PROTREG41_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG41_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG41_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 8 : Protection enable for region 40. */ +#define MPU_PROTENSET1_PROTREG40_Pos (8UL) /*!< Position of PROTREG40 field. */ +#define MPU_PROTENSET1_PROTREG40_Msk (0x1UL << MPU_PROTENSET1_PROTREG40_Pos) /*!< Bit mask of PROTREG40 field. */ +#define MPU_PROTENSET1_PROTREG40_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG40_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG40_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 7 : Protection enable for region 39. */ +#define MPU_PROTENSET1_PROTREG39_Pos (7UL) /*!< Position of PROTREG39 field. */ +#define MPU_PROTENSET1_PROTREG39_Msk (0x1UL << MPU_PROTENSET1_PROTREG39_Pos) /*!< Bit mask of PROTREG39 field. */ +#define MPU_PROTENSET1_PROTREG39_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG39_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG39_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 6 : Protection enable for region 38. */ +#define MPU_PROTENSET1_PROTREG38_Pos (6UL) /*!< Position of PROTREG38 field. */ +#define MPU_PROTENSET1_PROTREG38_Msk (0x1UL << MPU_PROTENSET1_PROTREG38_Pos) /*!< Bit mask of PROTREG38 field. */ +#define MPU_PROTENSET1_PROTREG38_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG38_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG38_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 5 : Protection enable for region 37. */ +#define MPU_PROTENSET1_PROTREG37_Pos (5UL) /*!< Position of PROTREG37 field. */ +#define MPU_PROTENSET1_PROTREG37_Msk (0x1UL << MPU_PROTENSET1_PROTREG37_Pos) /*!< Bit mask of PROTREG37 field. */ +#define MPU_PROTENSET1_PROTREG37_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG37_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG37_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 4 : Protection enable for region 36. */ +#define MPU_PROTENSET1_PROTREG36_Pos (4UL) /*!< Position of PROTREG36 field. */ +#define MPU_PROTENSET1_PROTREG36_Msk (0x1UL << MPU_PROTENSET1_PROTREG36_Pos) /*!< Bit mask of PROTREG36 field. */ +#define MPU_PROTENSET1_PROTREG36_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG36_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG36_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 3 : Protection enable for region 35. */ +#define MPU_PROTENSET1_PROTREG35_Pos (3UL) /*!< Position of PROTREG35 field. */ +#define MPU_PROTENSET1_PROTREG35_Msk (0x1UL << MPU_PROTENSET1_PROTREG35_Pos) /*!< Bit mask of PROTREG35 field. */ +#define MPU_PROTENSET1_PROTREG35_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG35_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG35_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 2 : Protection enable for region 34. */ +#define MPU_PROTENSET1_PROTREG34_Pos (2UL) /*!< Position of PROTREG34 field. */ +#define MPU_PROTENSET1_PROTREG34_Msk (0x1UL << MPU_PROTENSET1_PROTREG34_Pos) /*!< Bit mask of PROTREG34 field. */ +#define MPU_PROTENSET1_PROTREG34_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG34_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG34_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 1 : Protection enable for region 33. */ +#define MPU_PROTENSET1_PROTREG33_Pos (1UL) /*!< Position of PROTREG33 field. */ +#define MPU_PROTENSET1_PROTREG33_Msk (0x1UL << MPU_PROTENSET1_PROTREG33_Pos) /*!< Bit mask of PROTREG33 field. */ +#define MPU_PROTENSET1_PROTREG33_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG33_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG33_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 0 : Protection enable for region 32. */ +#define MPU_PROTENSET1_PROTREG32_Pos (0UL) /*!< Position of PROTREG32 field. */ +#define MPU_PROTENSET1_PROTREG32_Msk (0x1UL << MPU_PROTENSET1_PROTREG32_Pos) /*!< Bit mask of PROTREG32 field. */ +#define MPU_PROTENSET1_PROTREG32_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG32_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG32_Set (1UL) /*!< Enable protection on write. */ + +/* Register: MPU_DISABLEINDEBUG */ +/* Description: Disable erase and write protection mechanism in debug mode. */ + +/* Bit 0 : Disable protection mechanism in debug mode. */ +#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Pos (0UL) /*!< Position of DISABLEINDEBUG field. */ +#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Msk (0x1UL << MPU_DISABLEINDEBUG_DISABLEINDEBUG_Pos) /*!< Bit mask of DISABLEINDEBUG field. */ +#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Enabled (0UL) /*!< Protection enabled. */ +#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Disabled (1UL) /*!< Protection disabled. */ + +/* Register: MPU_PROTBLOCKSIZE */ +/* Description: Erase and write protection block size. */ + +/* Bits 1..0 : Erase and write protection block size. */ +#define MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_Pos (0UL) /*!< Position of PROTBLOCKSIZE field. */ +#define MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_Msk (0x3UL << MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_Pos) /*!< Bit mask of PROTBLOCKSIZE field. */ +#define MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_4k (0UL) /*!< Erase and write protection block size is 4k. */ + + +/* Peripheral: NVMC */ +/* Description: Non Volatile Memory Controller. */ + +/* Register: NVMC_READY */ +/* Description: Ready flag. */ + +/* Bit 0 : NVMC ready. */ +#define NVMC_READY_READY_Pos (0UL) /*!< Position of READY field. */ +#define NVMC_READY_READY_Msk (0x1UL << NVMC_READY_READY_Pos) /*!< Bit mask of READY field. */ +#define NVMC_READY_READY_Busy (0UL) /*!< NVMC is busy (on-going write or erase operation). */ +#define NVMC_READY_READY_Ready (1UL) /*!< NVMC is ready. */ + +/* Register: NVMC_CONFIG */ +/* Description: Configuration register. */ + +/* Bits 1..0 : Program write enable. */ +#define NVMC_CONFIG_WEN_Pos (0UL) /*!< Position of WEN field. */ +#define NVMC_CONFIG_WEN_Msk (0x3UL << NVMC_CONFIG_WEN_Pos) /*!< Bit mask of WEN field. */ +#define NVMC_CONFIG_WEN_Ren (0x00UL) /*!< Read only access. */ +#define NVMC_CONFIG_WEN_Wen (0x01UL) /*!< Write enabled. */ +#define NVMC_CONFIG_WEN_Een (0x02UL) /*!< Erase enabled. */ + +/* Register: NVMC_ERASEALL */ +/* Description: Register for erasing all non-volatile user memory. */ + +/* Bit 0 : Starts the erasing of all user NVM (code region 0/1 and UICR registers). */ +#define NVMC_ERASEALL_ERASEALL_Pos (0UL) /*!< Position of ERASEALL field. */ +#define NVMC_ERASEALL_ERASEALL_Msk (0x1UL << NVMC_ERASEALL_ERASEALL_Pos) /*!< Bit mask of ERASEALL field. */ +#define NVMC_ERASEALL_ERASEALL_NoOperation (0UL) /*!< No operation. */ +#define NVMC_ERASEALL_ERASEALL_Erase (1UL) /*!< Start chip erase. */ + +/* Register: NVMC_ERASEUICR */ +/* Description: Register for start erasing User Information Congfiguration Registers. */ + +/* Bit 0 : It can only be used when all contents of code region 1 are erased. */ +#define NVMC_ERASEUICR_ERASEUICR_Pos (0UL) /*!< Position of ERASEUICR field. */ +#define NVMC_ERASEUICR_ERASEUICR_Msk (0x1UL << NVMC_ERASEUICR_ERASEUICR_Pos) /*!< Bit mask of ERASEUICR field. */ +#define NVMC_ERASEUICR_ERASEUICR_NoOperation (0UL) /*!< No operation. */ +#define NVMC_ERASEUICR_ERASEUICR_Erase (1UL) /*!< Start UICR erase. */ + + +/* Peripheral: POWER */ +/* Description: Power Control. */ + +/* Register: POWER_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 2 : Enable interrupt on POFWARN event. */ +#define POWER_INTENSET_POFWARN_Pos (2UL) /*!< Position of POFWARN field. */ +#define POWER_INTENSET_POFWARN_Msk (0x1UL << POWER_INTENSET_POFWARN_Pos) /*!< Bit mask of POFWARN field. */ +#define POWER_INTENSET_POFWARN_Disabled (0UL) /*!< Interrupt disabled. */ +#define POWER_INTENSET_POFWARN_Enabled (1UL) /*!< Interrupt enabled. */ +#define POWER_INTENSET_POFWARN_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: POWER_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 2 : Disable interrupt on POFWARN event. */ +#define POWER_INTENCLR_POFWARN_Pos (2UL) /*!< Position of POFWARN field. */ +#define POWER_INTENCLR_POFWARN_Msk (0x1UL << POWER_INTENCLR_POFWARN_Pos) /*!< Bit mask of POFWARN field. */ +#define POWER_INTENCLR_POFWARN_Disabled (0UL) /*!< Interrupt disabled. */ +#define POWER_INTENCLR_POFWARN_Enabled (1UL) /*!< Interrupt enabled. */ +#define POWER_INTENCLR_POFWARN_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: POWER_RESETREAS */ +/* Description: Reset reason. */ + +/* Bit 18 : Reset from wake-up from OFF mode detected by entering into debug interface mode. */ +#define POWER_RESETREAS_DIF_Pos (18UL) /*!< Position of DIF field. */ +#define POWER_RESETREAS_DIF_Msk (0x1UL << POWER_RESETREAS_DIF_Pos) /*!< Bit mask of DIF field. */ + +/* Bit 17 : Reset from wake-up from OFF mode detected by the use of ANADETECT signal from LPCOMP. */ +#define POWER_RESETREAS_LPCOMP_Pos (17UL) /*!< Position of LPCOMP field. */ +#define POWER_RESETREAS_LPCOMP_Msk (0x1UL << POWER_RESETREAS_LPCOMP_Pos) /*!< Bit mask of LPCOMP field. */ + +/* Bit 16 : Reset from wake-up from OFF mode detected by the use of DETECT signal from GPIO. */ +#define POWER_RESETREAS_OFF_Pos (16UL) /*!< Position of OFF field. */ +#define POWER_RESETREAS_OFF_Msk (0x1UL << POWER_RESETREAS_OFF_Pos) /*!< Bit mask of OFF field. */ + +/* Bit 3 : Reset from CPU lock-up detected. */ +#define POWER_RESETREAS_LOCKUP_Pos (3UL) /*!< Position of LOCKUP field. */ +#define POWER_RESETREAS_LOCKUP_Msk (0x1UL << POWER_RESETREAS_LOCKUP_Pos) /*!< Bit mask of LOCKUP field. */ + +/* Bit 2 : Reset from AIRCR.SYSRESETREQ detected. */ +#define POWER_RESETREAS_SREQ_Pos (2UL) /*!< Position of SREQ field. */ +#define POWER_RESETREAS_SREQ_Msk (0x1UL << POWER_RESETREAS_SREQ_Pos) /*!< Bit mask of SREQ field. */ + +/* Bit 1 : Reset from watchdog detected. */ +#define POWER_RESETREAS_DOG_Pos (1UL) /*!< Position of DOG field. */ +#define POWER_RESETREAS_DOG_Msk (0x1UL << POWER_RESETREAS_DOG_Pos) /*!< Bit mask of DOG field. */ + +/* Bit 0 : Reset from pin-reset detected. */ +#define POWER_RESETREAS_RESETPIN_Pos (0UL) /*!< Position of RESETPIN field. */ +#define POWER_RESETREAS_RESETPIN_Msk (0x1UL << POWER_RESETREAS_RESETPIN_Pos) /*!< Bit mask of RESETPIN field. */ + +/* Register: POWER_RAMSTATUS */ +/* Description: Ram status register. */ + +/* Bit 3 : RAM block 3 status. */ +#define POWER_RAMSTATUS_RAMBLOCK3_Pos (3UL) /*!< Position of RAMBLOCK3 field. */ +#define POWER_RAMSTATUS_RAMBLOCK3_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK3_Pos) /*!< Bit mask of RAMBLOCK3 field. */ +#define POWER_RAMSTATUS_RAMBLOCK3_Off (0UL) /*!< RAM block 3 is off or powering up. */ +#define POWER_RAMSTATUS_RAMBLOCK3_On (1UL) /*!< RAM block 3 is on. */ + +/* Bit 2 : RAM block 2 status. */ +#define POWER_RAMSTATUS_RAMBLOCK2_Pos (2UL) /*!< Position of RAMBLOCK2 field. */ +#define POWER_RAMSTATUS_RAMBLOCK2_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK2_Pos) /*!< Bit mask of RAMBLOCK2 field. */ +#define POWER_RAMSTATUS_RAMBLOCK2_Off (0UL) /*!< RAM block 2 is off or powering up. */ +#define POWER_RAMSTATUS_RAMBLOCK2_On (1UL) /*!< RAM block 2 is on. */ + +/* Bit 1 : RAM block 1 status. */ +#define POWER_RAMSTATUS_RAMBLOCK1_Pos (1UL) /*!< Position of RAMBLOCK1 field. */ +#define POWER_RAMSTATUS_RAMBLOCK1_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK1_Pos) /*!< Bit mask of RAMBLOCK1 field. */ +#define POWER_RAMSTATUS_RAMBLOCK1_Off (0UL) /*!< RAM block 1 is off or powering up. */ +#define POWER_RAMSTATUS_RAMBLOCK1_On (1UL) /*!< RAM block 1 is on. */ + +/* Bit 0 : RAM block 0 status. */ +#define POWER_RAMSTATUS_RAMBLOCK0_Pos (0UL) /*!< Position of RAMBLOCK0 field. */ +#define POWER_RAMSTATUS_RAMBLOCK0_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK0_Pos) /*!< Bit mask of RAMBLOCK0 field. */ +#define POWER_RAMSTATUS_RAMBLOCK0_Off (0UL) /*!< RAM block 0 is off or powering up. */ +#define POWER_RAMSTATUS_RAMBLOCK0_On (1UL) /*!< RAM block 0 is on. */ + +/* Register: POWER_SYSTEMOFF */ +/* Description: System off register. */ + +/* Bit 0 : Enter system off mode. */ +#define POWER_SYSTEMOFF_SYSTEMOFF_Pos (0UL) /*!< Position of SYSTEMOFF field. */ +#define POWER_SYSTEMOFF_SYSTEMOFF_Msk (0x1UL << POWER_SYSTEMOFF_SYSTEMOFF_Pos) /*!< Bit mask of SYSTEMOFF field. */ +#define POWER_SYSTEMOFF_SYSTEMOFF_Enter (1UL) /*!< Enter system off mode. */ + +/* Register: POWER_POFCON */ +/* Description: Power failure configuration. */ + +/* Bits 2..1 : Set threshold level. */ +#define POWER_POFCON_THRESHOLD_Pos (1UL) /*!< Position of THRESHOLD field. */ +#define POWER_POFCON_THRESHOLD_Msk (0x3UL << POWER_POFCON_THRESHOLD_Pos) /*!< Bit mask of THRESHOLD field. */ +#define POWER_POFCON_THRESHOLD_V21 (0x00UL) /*!< Set threshold to 2.1Volts. */ +#define POWER_POFCON_THRESHOLD_V23 (0x01UL) /*!< Set threshold to 2.3Volts. */ +#define POWER_POFCON_THRESHOLD_V25 (0x02UL) /*!< Set threshold to 2.5Volts. */ +#define POWER_POFCON_THRESHOLD_V27 (0x03UL) /*!< Set threshold to 2.7Volts. */ + +/* Bit 0 : Power failure comparator enable. */ +#define POWER_POFCON_POF_Pos (0UL) /*!< Position of POF field. */ +#define POWER_POFCON_POF_Msk (0x1UL << POWER_POFCON_POF_Pos) /*!< Bit mask of POF field. */ +#define POWER_POFCON_POF_Disabled (0UL) /*!< Disabled. */ +#define POWER_POFCON_POF_Enabled (1UL) /*!< Enabled. */ + +/* Register: POWER_GPREGRET */ +/* Description: General purpose retention register. This register is a retained register. */ + +/* Bits 7..0 : General purpose retention register. */ +#define POWER_GPREGRET_GPREGRET_Pos (0UL) /*!< Position of GPREGRET field. */ +#define POWER_GPREGRET_GPREGRET_Msk (0xFFUL << POWER_GPREGRET_GPREGRET_Pos) /*!< Bit mask of GPREGRET field. */ + +/* Register: POWER_RAMON */ +/* Description: Ram on/off. */ + +/* Bit 17 : RAM block 1 behaviour in OFF mode. */ +#define POWER_RAMON_OFFRAM1_Pos (17UL) /*!< Position of OFFRAM1 field. */ +#define POWER_RAMON_OFFRAM1_Msk (0x1UL << POWER_RAMON_OFFRAM1_Pos) /*!< Bit mask of OFFRAM1 field. */ +#define POWER_RAMON_OFFRAM1_RAM1Off (0UL) /*!< RAM block 1 OFF in OFF mode. */ +#define POWER_RAMON_OFFRAM1_RAM1On (1UL) /*!< RAM block 1 ON in OFF mode. */ + +/* Bit 16 : RAM block 0 behaviour in OFF mode. */ +#define POWER_RAMON_OFFRAM0_Pos (16UL) /*!< Position of OFFRAM0 field. */ +#define POWER_RAMON_OFFRAM0_Msk (0x1UL << POWER_RAMON_OFFRAM0_Pos) /*!< Bit mask of OFFRAM0 field. */ +#define POWER_RAMON_OFFRAM0_RAM0Off (0UL) /*!< RAM block 0 OFF in OFF mode. */ +#define POWER_RAMON_OFFRAM0_RAM0On (1UL) /*!< RAM block 0 ON in OFF mode. */ + +/* Bit 1 : RAM block 1 behaviour in ON mode. */ +#define POWER_RAMON_ONRAM1_Pos (1UL) /*!< Position of ONRAM1 field. */ +#define POWER_RAMON_ONRAM1_Msk (0x1UL << POWER_RAMON_ONRAM1_Pos) /*!< Bit mask of ONRAM1 field. */ +#define POWER_RAMON_ONRAM1_RAM1Off (0UL) /*!< RAM block 1 OFF in ON mode. */ +#define POWER_RAMON_ONRAM1_RAM1On (1UL) /*!< RAM block 1 ON in ON mode. */ + +/* Bit 0 : RAM block 0 behaviour in ON mode. */ +#define POWER_RAMON_ONRAM0_Pos (0UL) /*!< Position of ONRAM0 field. */ +#define POWER_RAMON_ONRAM0_Msk (0x1UL << POWER_RAMON_ONRAM0_Pos) /*!< Bit mask of ONRAM0 field. */ +#define POWER_RAMON_ONRAM0_RAM0Off (0UL) /*!< RAM block 0 OFF in ON mode. */ +#define POWER_RAMON_ONRAM0_RAM0On (1UL) /*!< RAM block 0 ON in ON mode. */ + +/* Register: POWER_RESET */ +/* Description: Pin reset functionality configuration register. This register is a retained register. */ + +/* Bit 0 : Enable or disable pin reset in debug interface mode. */ +#define POWER_RESET_RESET_Pos (0UL) /*!< Position of RESET field. */ +#define POWER_RESET_RESET_Msk (0x1UL << POWER_RESET_RESET_Pos) /*!< Bit mask of RESET field. */ +#define POWER_RESET_RESET_Disabled (0UL) /*!< Pin reset in debug interface mode disabled. */ +#define POWER_RESET_RESET_Enabled (1UL) /*!< Pin reset in debug interface mode enabled. */ + +/* Register: POWER_RAMONB */ +/* Description: Ram on/off. */ + +/* Bit 17 : RAM block 3 behaviour in OFF mode. */ +#define POWER_RAMONB_OFFRAM3_Pos (17UL) /*!< Position of OFFRAM3 field. */ +#define POWER_RAMONB_OFFRAM3_Msk (0x1UL << POWER_RAMONB_OFFRAM3_Pos) /*!< Bit mask of OFFRAM3 field. */ +#define POWER_RAMONB_OFFRAM3_RAM3Off (0UL) /*!< RAM block 3 OFF in OFF mode. */ +#define POWER_RAMONB_OFFRAM3_RAM3On (1UL) /*!< RAM block 3 ON in OFF mode. */ + +/* Bit 16 : RAM block 2 behaviour in OFF mode. */ +#define POWER_RAMONB_OFFRAM2_Pos (16UL) /*!< Position of OFFRAM2 field. */ +#define POWER_RAMONB_OFFRAM2_Msk (0x1UL << POWER_RAMONB_OFFRAM2_Pos) /*!< Bit mask of OFFRAM2 field. */ +#define POWER_RAMONB_OFFRAM2_RAM2Off (0UL) /*!< RAM block 2 OFF in OFF mode. */ +#define POWER_RAMONB_OFFRAM2_RAM2On (1UL) /*!< RAM block 2 ON in OFF mode. */ + +/* Bit 1 : RAM block 3 behaviour in ON mode. */ +#define POWER_RAMONB_ONRAM3_Pos (1UL) /*!< Position of ONRAM3 field. */ +#define POWER_RAMONB_ONRAM3_Msk (0x1UL << POWER_RAMONB_ONRAM3_Pos) /*!< Bit mask of ONRAM3 field. */ +#define POWER_RAMONB_ONRAM3_RAM3Off (0UL) /*!< RAM block 33 OFF in ON mode. */ +#define POWER_RAMONB_ONRAM3_RAM3On (1UL) /*!< RAM block 3 ON in ON mode. */ + +/* Bit 0 : RAM block 2 behaviour in ON mode. */ +#define POWER_RAMONB_ONRAM2_Pos (0UL) /*!< Position of ONRAM2 field. */ +#define POWER_RAMONB_ONRAM2_Msk (0x1UL << POWER_RAMONB_ONRAM2_Pos) /*!< Bit mask of ONRAM2 field. */ +#define POWER_RAMONB_ONRAM2_RAM2Off (0UL) /*!< RAM block 2 OFF in ON mode. */ +#define POWER_RAMONB_ONRAM2_RAM2On (1UL) /*!< RAM block 2 ON in ON mode. */ + +/* Register: POWER_DCDCEN */ +/* Description: DCDC converter enable configuration register. */ + +/* Bit 0 : Enable DCDC converter. */ +#define POWER_DCDCEN_DCDCEN_Pos (0UL) /*!< Position of DCDCEN field. */ +#define POWER_DCDCEN_DCDCEN_Msk (0x1UL << POWER_DCDCEN_DCDCEN_Pos) /*!< Bit mask of DCDCEN field. */ +#define POWER_DCDCEN_DCDCEN_Disabled (0UL) /*!< DCDC converter disabled. */ +#define POWER_DCDCEN_DCDCEN_Enabled (1UL) /*!< DCDC converter enabled. */ + +/* Register: POWER_DCDCFORCE */ +/* Description: DCDC power-up force register. */ + +/* Bit 1 : DCDC power-up force on. */ +#define POWER_DCDCFORCE_FORCEON_Pos (1UL) /*!< Position of FORCEON field. */ +#define POWER_DCDCFORCE_FORCEON_Msk (0x1UL << POWER_DCDCFORCE_FORCEON_Pos) /*!< Bit mask of FORCEON field. */ +#define POWER_DCDCFORCE_FORCEON_NoForce (0UL) /*!< No force. */ +#define POWER_DCDCFORCE_FORCEON_Force (1UL) /*!< Force. */ + +/* Bit 0 : DCDC power-up force off. */ +#define POWER_DCDCFORCE_FORCEOFF_Pos (0UL) /*!< Position of FORCEOFF field. */ +#define POWER_DCDCFORCE_FORCEOFF_Msk (0x1UL << POWER_DCDCFORCE_FORCEOFF_Pos) /*!< Bit mask of FORCEOFF field. */ +#define POWER_DCDCFORCE_FORCEOFF_NoForce (0UL) /*!< No force. */ +#define POWER_DCDCFORCE_FORCEOFF_Force (1UL) /*!< Force. */ + + +/* Peripheral: PPI */ +/* Description: PPI controller. */ + +/* Register: PPI_CHEN */ +/* Description: Channel enable. */ + +/* Bit 31 : Enable PPI channel 31. */ +#define PPI_CHEN_CH31_Pos (31UL) /*!< Position of CH31 field. */ +#define PPI_CHEN_CH31_Msk (0x1UL << PPI_CHEN_CH31_Pos) /*!< Bit mask of CH31 field. */ +#define PPI_CHEN_CH31_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH31_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 30 : Enable PPI channel 30. */ +#define PPI_CHEN_CH30_Pos (30UL) /*!< Position of CH30 field. */ +#define PPI_CHEN_CH30_Msk (0x1UL << PPI_CHEN_CH30_Pos) /*!< Bit mask of CH30 field. */ +#define PPI_CHEN_CH30_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH30_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 29 : Enable PPI channel 29. */ +#define PPI_CHEN_CH29_Pos (29UL) /*!< Position of CH29 field. */ +#define PPI_CHEN_CH29_Msk (0x1UL << PPI_CHEN_CH29_Pos) /*!< Bit mask of CH29 field. */ +#define PPI_CHEN_CH29_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH29_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 28 : Enable PPI channel 28. */ +#define PPI_CHEN_CH28_Pos (28UL) /*!< Position of CH28 field. */ +#define PPI_CHEN_CH28_Msk (0x1UL << PPI_CHEN_CH28_Pos) /*!< Bit mask of CH28 field. */ +#define PPI_CHEN_CH28_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH28_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 27 : Enable PPI channel 27. */ +#define PPI_CHEN_CH27_Pos (27UL) /*!< Position of CH27 field. */ +#define PPI_CHEN_CH27_Msk (0x1UL << PPI_CHEN_CH27_Pos) /*!< Bit mask of CH27 field. */ +#define PPI_CHEN_CH27_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH27_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 26 : Enable PPI channel 26. */ +#define PPI_CHEN_CH26_Pos (26UL) /*!< Position of CH26 field. */ +#define PPI_CHEN_CH26_Msk (0x1UL << PPI_CHEN_CH26_Pos) /*!< Bit mask of CH26 field. */ +#define PPI_CHEN_CH26_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH26_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 25 : Enable PPI channel 25. */ +#define PPI_CHEN_CH25_Pos (25UL) /*!< Position of CH25 field. */ +#define PPI_CHEN_CH25_Msk (0x1UL << PPI_CHEN_CH25_Pos) /*!< Bit mask of CH25 field. */ +#define PPI_CHEN_CH25_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH25_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 24 : Enable PPI channel 24. */ +#define PPI_CHEN_CH24_Pos (24UL) /*!< Position of CH24 field. */ +#define PPI_CHEN_CH24_Msk (0x1UL << PPI_CHEN_CH24_Pos) /*!< Bit mask of CH24 field. */ +#define PPI_CHEN_CH24_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH24_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 23 : Enable PPI channel 23. */ +#define PPI_CHEN_CH23_Pos (23UL) /*!< Position of CH23 field. */ +#define PPI_CHEN_CH23_Msk (0x1UL << PPI_CHEN_CH23_Pos) /*!< Bit mask of CH23 field. */ +#define PPI_CHEN_CH23_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH23_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 22 : Enable PPI channel 22. */ +#define PPI_CHEN_CH22_Pos (22UL) /*!< Position of CH22 field. */ +#define PPI_CHEN_CH22_Msk (0x1UL << PPI_CHEN_CH22_Pos) /*!< Bit mask of CH22 field. */ +#define PPI_CHEN_CH22_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH22_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 21 : Enable PPI channel 21. */ +#define PPI_CHEN_CH21_Pos (21UL) /*!< Position of CH21 field. */ +#define PPI_CHEN_CH21_Msk (0x1UL << PPI_CHEN_CH21_Pos) /*!< Bit mask of CH21 field. */ +#define PPI_CHEN_CH21_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH21_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 20 : Enable PPI channel 20. */ +#define PPI_CHEN_CH20_Pos (20UL) /*!< Position of CH20 field. */ +#define PPI_CHEN_CH20_Msk (0x1UL << PPI_CHEN_CH20_Pos) /*!< Bit mask of CH20 field. */ +#define PPI_CHEN_CH20_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH20_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 15 : Enable PPI channel 15. */ +#define PPI_CHEN_CH15_Pos (15UL) /*!< Position of CH15 field. */ +#define PPI_CHEN_CH15_Msk (0x1UL << PPI_CHEN_CH15_Pos) /*!< Bit mask of CH15 field. */ +#define PPI_CHEN_CH15_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH15_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 14 : Enable PPI channel 14. */ +#define PPI_CHEN_CH14_Pos (14UL) /*!< Position of CH14 field. */ +#define PPI_CHEN_CH14_Msk (0x1UL << PPI_CHEN_CH14_Pos) /*!< Bit mask of CH14 field. */ +#define PPI_CHEN_CH14_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH14_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 13 : Enable PPI channel 13. */ +#define PPI_CHEN_CH13_Pos (13UL) /*!< Position of CH13 field. */ +#define PPI_CHEN_CH13_Msk (0x1UL << PPI_CHEN_CH13_Pos) /*!< Bit mask of CH13 field. */ +#define PPI_CHEN_CH13_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH13_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 12 : Enable PPI channel 12. */ +#define PPI_CHEN_CH12_Pos (12UL) /*!< Position of CH12 field. */ +#define PPI_CHEN_CH12_Msk (0x1UL << PPI_CHEN_CH12_Pos) /*!< Bit mask of CH12 field. */ +#define PPI_CHEN_CH12_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH12_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 11 : Enable PPI channel 11. */ +#define PPI_CHEN_CH11_Pos (11UL) /*!< Position of CH11 field. */ +#define PPI_CHEN_CH11_Msk (0x1UL << PPI_CHEN_CH11_Pos) /*!< Bit mask of CH11 field. */ +#define PPI_CHEN_CH11_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH11_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 10 : Enable PPI channel 10. */ +#define PPI_CHEN_CH10_Pos (10UL) /*!< Position of CH10 field. */ +#define PPI_CHEN_CH10_Msk (0x1UL << PPI_CHEN_CH10_Pos) /*!< Bit mask of CH10 field. */ +#define PPI_CHEN_CH10_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH10_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 9 : Enable PPI channel 9. */ +#define PPI_CHEN_CH9_Pos (9UL) /*!< Position of CH9 field. */ +#define PPI_CHEN_CH9_Msk (0x1UL << PPI_CHEN_CH9_Pos) /*!< Bit mask of CH9 field. */ +#define PPI_CHEN_CH9_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH9_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 8 : Enable PPI channel 8. */ +#define PPI_CHEN_CH8_Pos (8UL) /*!< Position of CH8 field. */ +#define PPI_CHEN_CH8_Msk (0x1UL << PPI_CHEN_CH8_Pos) /*!< Bit mask of CH8 field. */ +#define PPI_CHEN_CH8_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH8_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 7 : Enable PPI channel 7. */ +#define PPI_CHEN_CH7_Pos (7UL) /*!< Position of CH7 field. */ +#define PPI_CHEN_CH7_Msk (0x1UL << PPI_CHEN_CH7_Pos) /*!< Bit mask of CH7 field. */ +#define PPI_CHEN_CH7_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH7_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 6 : Enable PPI channel 6. */ +#define PPI_CHEN_CH6_Pos (6UL) /*!< Position of CH6 field. */ +#define PPI_CHEN_CH6_Msk (0x1UL << PPI_CHEN_CH6_Pos) /*!< Bit mask of CH6 field. */ +#define PPI_CHEN_CH6_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH6_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 5 : Enable PPI channel 5. */ +#define PPI_CHEN_CH5_Pos (5UL) /*!< Position of CH5 field. */ +#define PPI_CHEN_CH5_Msk (0x1UL << PPI_CHEN_CH5_Pos) /*!< Bit mask of CH5 field. */ +#define PPI_CHEN_CH5_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH5_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 4 : Enable PPI channel 4. */ +#define PPI_CHEN_CH4_Pos (4UL) /*!< Position of CH4 field. */ +#define PPI_CHEN_CH4_Msk (0x1UL << PPI_CHEN_CH4_Pos) /*!< Bit mask of CH4 field. */ +#define PPI_CHEN_CH4_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH4_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 3 : Enable PPI channel 3. */ +#define PPI_CHEN_CH3_Pos (3UL) /*!< Position of CH3 field. */ +#define PPI_CHEN_CH3_Msk (0x1UL << PPI_CHEN_CH3_Pos) /*!< Bit mask of CH3 field. */ +#define PPI_CHEN_CH3_Disabled (0UL) /*!< Channel disabled */ +#define PPI_CHEN_CH3_Enabled (1UL) /*!< Channel enabled */ + +/* Bit 2 : Enable PPI channel 2. */ +#define PPI_CHEN_CH2_Pos (2UL) /*!< Position of CH2 field. */ +#define PPI_CHEN_CH2_Msk (0x1UL << PPI_CHEN_CH2_Pos) /*!< Bit mask of CH2 field. */ +#define PPI_CHEN_CH2_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH2_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 1 : Enable PPI channel 1. */ +#define PPI_CHEN_CH1_Pos (1UL) /*!< Position of CH1 field. */ +#define PPI_CHEN_CH1_Msk (0x1UL << PPI_CHEN_CH1_Pos) /*!< Bit mask of CH1 field. */ +#define PPI_CHEN_CH1_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH1_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 0 : Enable PPI channel 0. */ +#define PPI_CHEN_CH0_Pos (0UL) /*!< Position of CH0 field. */ +#define PPI_CHEN_CH0_Msk (0x1UL << PPI_CHEN_CH0_Pos) /*!< Bit mask of CH0 field. */ +#define PPI_CHEN_CH0_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH0_Enabled (1UL) /*!< Channel enabled. */ + +/* Register: PPI_CHENSET */ +/* Description: Channel enable set. */ + +/* Bit 31 : Enable PPI channel 31. */ +#define PPI_CHENSET_CH31_Pos (31UL) /*!< Position of CH31 field. */ +#define PPI_CHENSET_CH31_Msk (0x1UL << PPI_CHENSET_CH31_Pos) /*!< Bit mask of CH31 field. */ +#define PPI_CHENSET_CH31_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH31_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH31_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 30 : Enable PPI channel 30. */ +#define PPI_CHENSET_CH30_Pos (30UL) /*!< Position of CH30 field. */ +#define PPI_CHENSET_CH30_Msk (0x1UL << PPI_CHENSET_CH30_Pos) /*!< Bit mask of CH30 field. */ +#define PPI_CHENSET_CH30_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH30_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH30_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 29 : Enable PPI channel 29. */ +#define PPI_CHENSET_CH29_Pos (29UL) /*!< Position of CH29 field. */ +#define PPI_CHENSET_CH29_Msk (0x1UL << PPI_CHENSET_CH29_Pos) /*!< Bit mask of CH29 field. */ +#define PPI_CHENSET_CH29_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH29_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH29_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 28 : Enable PPI channel 28. */ +#define PPI_CHENSET_CH28_Pos (28UL) /*!< Position of CH28 field. */ +#define PPI_CHENSET_CH28_Msk (0x1UL << PPI_CHENSET_CH28_Pos) /*!< Bit mask of CH28 field. */ +#define PPI_CHENSET_CH28_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH28_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH28_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 27 : Enable PPI channel 27. */ +#define PPI_CHENSET_CH27_Pos (27UL) /*!< Position of CH27 field. */ +#define PPI_CHENSET_CH27_Msk (0x1UL << PPI_CHENSET_CH27_Pos) /*!< Bit mask of CH27 field. */ +#define PPI_CHENSET_CH27_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH27_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH27_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 26 : Enable PPI channel 26. */ +#define PPI_CHENSET_CH26_Pos (26UL) /*!< Position of CH26 field. */ +#define PPI_CHENSET_CH26_Msk (0x1UL << PPI_CHENSET_CH26_Pos) /*!< Bit mask of CH26 field. */ +#define PPI_CHENSET_CH26_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH26_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH26_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 25 : Enable PPI channel 25. */ +#define PPI_CHENSET_CH25_Pos (25UL) /*!< Position of CH25 field. */ +#define PPI_CHENSET_CH25_Msk (0x1UL << PPI_CHENSET_CH25_Pos) /*!< Bit mask of CH25 field. */ +#define PPI_CHENSET_CH25_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH25_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH25_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 24 : Enable PPI channel 24. */ +#define PPI_CHENSET_CH24_Pos (24UL) /*!< Position of CH24 field. */ +#define PPI_CHENSET_CH24_Msk (0x1UL << PPI_CHENSET_CH24_Pos) /*!< Bit mask of CH24 field. */ +#define PPI_CHENSET_CH24_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH24_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH24_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 23 : Enable PPI channel 23. */ +#define PPI_CHENSET_CH23_Pos (23UL) /*!< Position of CH23 field. */ +#define PPI_CHENSET_CH23_Msk (0x1UL << PPI_CHENSET_CH23_Pos) /*!< Bit mask of CH23 field. */ +#define PPI_CHENSET_CH23_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH23_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH23_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 22 : Enable PPI channel 22. */ +#define PPI_CHENSET_CH22_Pos (22UL) /*!< Position of CH22 field. */ +#define PPI_CHENSET_CH22_Msk (0x1UL << PPI_CHENSET_CH22_Pos) /*!< Bit mask of CH22 field. */ +#define PPI_CHENSET_CH22_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH22_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH22_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 21 : Enable PPI channel 21. */ +#define PPI_CHENSET_CH21_Pos (21UL) /*!< Position of CH21 field. */ +#define PPI_CHENSET_CH21_Msk (0x1UL << PPI_CHENSET_CH21_Pos) /*!< Bit mask of CH21 field. */ +#define PPI_CHENSET_CH21_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH21_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH21_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 20 : Enable PPI channel 20. */ +#define PPI_CHENSET_CH20_Pos (20UL) /*!< Position of CH20 field. */ +#define PPI_CHENSET_CH20_Msk (0x1UL << PPI_CHENSET_CH20_Pos) /*!< Bit mask of CH20 field. */ +#define PPI_CHENSET_CH20_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH20_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH20_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 15 : Enable PPI channel 15. */ +#define PPI_CHENSET_CH15_Pos (15UL) /*!< Position of CH15 field. */ +#define PPI_CHENSET_CH15_Msk (0x1UL << PPI_CHENSET_CH15_Pos) /*!< Bit mask of CH15 field. */ +#define PPI_CHENSET_CH15_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH15_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH15_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 14 : Enable PPI channel 14. */ +#define PPI_CHENSET_CH14_Pos (14UL) /*!< Position of CH14 field. */ +#define PPI_CHENSET_CH14_Msk (0x1UL << PPI_CHENSET_CH14_Pos) /*!< Bit mask of CH14 field. */ +#define PPI_CHENSET_CH14_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH14_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH14_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 13 : Enable PPI channel 13. */ +#define PPI_CHENSET_CH13_Pos (13UL) /*!< Position of CH13 field. */ +#define PPI_CHENSET_CH13_Msk (0x1UL << PPI_CHENSET_CH13_Pos) /*!< Bit mask of CH13 field. */ +#define PPI_CHENSET_CH13_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH13_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH13_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 12 : Enable PPI channel 12. */ +#define PPI_CHENSET_CH12_Pos (12UL) /*!< Position of CH12 field. */ +#define PPI_CHENSET_CH12_Msk (0x1UL << PPI_CHENSET_CH12_Pos) /*!< Bit mask of CH12 field. */ +#define PPI_CHENSET_CH12_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH12_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH12_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 11 : Enable PPI channel 11. */ +#define PPI_CHENSET_CH11_Pos (11UL) /*!< Position of CH11 field. */ +#define PPI_CHENSET_CH11_Msk (0x1UL << PPI_CHENSET_CH11_Pos) /*!< Bit mask of CH11 field. */ +#define PPI_CHENSET_CH11_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH11_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH11_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 10 : Enable PPI channel 10. */ +#define PPI_CHENSET_CH10_Pos (10UL) /*!< Position of CH10 field. */ +#define PPI_CHENSET_CH10_Msk (0x1UL << PPI_CHENSET_CH10_Pos) /*!< Bit mask of CH10 field. */ +#define PPI_CHENSET_CH10_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH10_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH10_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 9 : Enable PPI channel 9. */ +#define PPI_CHENSET_CH9_Pos (9UL) /*!< Position of CH9 field. */ +#define PPI_CHENSET_CH9_Msk (0x1UL << PPI_CHENSET_CH9_Pos) /*!< Bit mask of CH9 field. */ +#define PPI_CHENSET_CH9_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH9_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH9_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 8 : Enable PPI channel 8. */ +#define PPI_CHENSET_CH8_Pos (8UL) /*!< Position of CH8 field. */ +#define PPI_CHENSET_CH8_Msk (0x1UL << PPI_CHENSET_CH8_Pos) /*!< Bit mask of CH8 field. */ +#define PPI_CHENSET_CH8_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH8_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH8_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 7 : Enable PPI channel 7. */ +#define PPI_CHENSET_CH7_Pos (7UL) /*!< Position of CH7 field. */ +#define PPI_CHENSET_CH7_Msk (0x1UL << PPI_CHENSET_CH7_Pos) /*!< Bit mask of CH7 field. */ +#define PPI_CHENSET_CH7_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH7_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH7_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 6 : Enable PPI channel 6. */ +#define PPI_CHENSET_CH6_Pos (6UL) /*!< Position of CH6 field. */ +#define PPI_CHENSET_CH6_Msk (0x1UL << PPI_CHENSET_CH6_Pos) /*!< Bit mask of CH6 field. */ +#define PPI_CHENSET_CH6_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH6_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH6_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 5 : Enable PPI channel 5. */ +#define PPI_CHENSET_CH5_Pos (5UL) /*!< Position of CH5 field. */ +#define PPI_CHENSET_CH5_Msk (0x1UL << PPI_CHENSET_CH5_Pos) /*!< Bit mask of CH5 field. */ +#define PPI_CHENSET_CH5_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH5_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH5_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 4 : Enable PPI channel 4. */ +#define PPI_CHENSET_CH4_Pos (4UL) /*!< Position of CH4 field. */ +#define PPI_CHENSET_CH4_Msk (0x1UL << PPI_CHENSET_CH4_Pos) /*!< Bit mask of CH4 field. */ +#define PPI_CHENSET_CH4_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH4_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH4_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 3 : Enable PPI channel 3. */ +#define PPI_CHENSET_CH3_Pos (3UL) /*!< Position of CH3 field. */ +#define PPI_CHENSET_CH3_Msk (0x1UL << PPI_CHENSET_CH3_Pos) /*!< Bit mask of CH3 field. */ +#define PPI_CHENSET_CH3_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH3_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH3_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 2 : Enable PPI channel 2. */ +#define PPI_CHENSET_CH2_Pos (2UL) /*!< Position of CH2 field. */ +#define PPI_CHENSET_CH2_Msk (0x1UL << PPI_CHENSET_CH2_Pos) /*!< Bit mask of CH2 field. */ +#define PPI_CHENSET_CH2_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH2_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH2_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 1 : Enable PPI channel 1. */ +#define PPI_CHENSET_CH1_Pos (1UL) /*!< Position of CH1 field. */ +#define PPI_CHENSET_CH1_Msk (0x1UL << PPI_CHENSET_CH1_Pos) /*!< Bit mask of CH1 field. */ +#define PPI_CHENSET_CH1_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH1_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH1_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 0 : Enable PPI channel 0. */ +#define PPI_CHENSET_CH0_Pos (0UL) /*!< Position of CH0 field. */ +#define PPI_CHENSET_CH0_Msk (0x1UL << PPI_CHENSET_CH0_Pos) /*!< Bit mask of CH0 field. */ +#define PPI_CHENSET_CH0_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH0_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH0_Set (1UL) /*!< Enable channel on write. */ + +/* Register: PPI_CHENCLR */ +/* Description: Channel enable clear. */ + +/* Bit 31 : Disable PPI channel 31. */ +#define PPI_CHENCLR_CH31_Pos (31UL) /*!< Position of CH31 field. */ +#define PPI_CHENCLR_CH31_Msk (0x1UL << PPI_CHENCLR_CH31_Pos) /*!< Bit mask of CH31 field. */ +#define PPI_CHENCLR_CH31_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH31_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH31_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 30 : Disable PPI channel 30. */ +#define PPI_CHENCLR_CH30_Pos (30UL) /*!< Position of CH30 field. */ +#define PPI_CHENCLR_CH30_Msk (0x1UL << PPI_CHENCLR_CH30_Pos) /*!< Bit mask of CH30 field. */ +#define PPI_CHENCLR_CH30_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH30_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH30_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 29 : Disable PPI channel 29. */ +#define PPI_CHENCLR_CH29_Pos (29UL) /*!< Position of CH29 field. */ +#define PPI_CHENCLR_CH29_Msk (0x1UL << PPI_CHENCLR_CH29_Pos) /*!< Bit mask of CH29 field. */ +#define PPI_CHENCLR_CH29_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH29_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH29_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 28 : Disable PPI channel 28. */ +#define PPI_CHENCLR_CH28_Pos (28UL) /*!< Position of CH28 field. */ +#define PPI_CHENCLR_CH28_Msk (0x1UL << PPI_CHENCLR_CH28_Pos) /*!< Bit mask of CH28 field. */ +#define PPI_CHENCLR_CH28_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH28_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH28_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 27 : Disable PPI channel 27. */ +#define PPI_CHENCLR_CH27_Pos (27UL) /*!< Position of CH27 field. */ +#define PPI_CHENCLR_CH27_Msk (0x1UL << PPI_CHENCLR_CH27_Pos) /*!< Bit mask of CH27 field. */ +#define PPI_CHENCLR_CH27_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH27_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH27_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 26 : Disable PPI channel 26. */ +#define PPI_CHENCLR_CH26_Pos (26UL) /*!< Position of CH26 field. */ +#define PPI_CHENCLR_CH26_Msk (0x1UL << PPI_CHENCLR_CH26_Pos) /*!< Bit mask of CH26 field. */ +#define PPI_CHENCLR_CH26_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH26_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH26_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 25 : Disable PPI channel 25. */ +#define PPI_CHENCLR_CH25_Pos (25UL) /*!< Position of CH25 field. */ +#define PPI_CHENCLR_CH25_Msk (0x1UL << PPI_CHENCLR_CH25_Pos) /*!< Bit mask of CH25 field. */ +#define PPI_CHENCLR_CH25_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH25_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH25_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 24 : Disable PPI channel 24. */ +#define PPI_CHENCLR_CH24_Pos (24UL) /*!< Position of CH24 field. */ +#define PPI_CHENCLR_CH24_Msk (0x1UL << PPI_CHENCLR_CH24_Pos) /*!< Bit mask of CH24 field. */ +#define PPI_CHENCLR_CH24_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH24_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH24_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 23 : Disable PPI channel 23. */ +#define PPI_CHENCLR_CH23_Pos (23UL) /*!< Position of CH23 field. */ +#define PPI_CHENCLR_CH23_Msk (0x1UL << PPI_CHENCLR_CH23_Pos) /*!< Bit mask of CH23 field. */ +#define PPI_CHENCLR_CH23_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH23_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH23_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 22 : Disable PPI channel 22. */ +#define PPI_CHENCLR_CH22_Pos (22UL) /*!< Position of CH22 field. */ +#define PPI_CHENCLR_CH22_Msk (0x1UL << PPI_CHENCLR_CH22_Pos) /*!< Bit mask of CH22 field. */ +#define PPI_CHENCLR_CH22_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH22_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH22_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 21 : Disable PPI channel 21. */ +#define PPI_CHENCLR_CH21_Pos (21UL) /*!< Position of CH21 field. */ +#define PPI_CHENCLR_CH21_Msk (0x1UL << PPI_CHENCLR_CH21_Pos) /*!< Bit mask of CH21 field. */ +#define PPI_CHENCLR_CH21_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH21_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH21_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 20 : Disable PPI channel 20. */ +#define PPI_CHENCLR_CH20_Pos (20UL) /*!< Position of CH20 field. */ +#define PPI_CHENCLR_CH20_Msk (0x1UL << PPI_CHENCLR_CH20_Pos) /*!< Bit mask of CH20 field. */ +#define PPI_CHENCLR_CH20_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH20_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH20_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 15 : Disable PPI channel 15. */ +#define PPI_CHENCLR_CH15_Pos (15UL) /*!< Position of CH15 field. */ +#define PPI_CHENCLR_CH15_Msk (0x1UL << PPI_CHENCLR_CH15_Pos) /*!< Bit mask of CH15 field. */ +#define PPI_CHENCLR_CH15_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH15_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH15_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 14 : Disable PPI channel 14. */ +#define PPI_CHENCLR_CH14_Pos (14UL) /*!< Position of CH14 field. */ +#define PPI_CHENCLR_CH14_Msk (0x1UL << PPI_CHENCLR_CH14_Pos) /*!< Bit mask of CH14 field. */ +#define PPI_CHENCLR_CH14_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH14_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH14_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 13 : Disable PPI channel 13. */ +#define PPI_CHENCLR_CH13_Pos (13UL) /*!< Position of CH13 field. */ +#define PPI_CHENCLR_CH13_Msk (0x1UL << PPI_CHENCLR_CH13_Pos) /*!< Bit mask of CH13 field. */ +#define PPI_CHENCLR_CH13_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH13_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH13_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 12 : Disable PPI channel 12. */ +#define PPI_CHENCLR_CH12_Pos (12UL) /*!< Position of CH12 field. */ +#define PPI_CHENCLR_CH12_Msk (0x1UL << PPI_CHENCLR_CH12_Pos) /*!< Bit mask of CH12 field. */ +#define PPI_CHENCLR_CH12_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH12_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH12_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 11 : Disable PPI channel 11. */ +#define PPI_CHENCLR_CH11_Pos (11UL) /*!< Position of CH11 field. */ +#define PPI_CHENCLR_CH11_Msk (0x1UL << PPI_CHENCLR_CH11_Pos) /*!< Bit mask of CH11 field. */ +#define PPI_CHENCLR_CH11_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH11_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH11_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 10 : Disable PPI channel 10. */ +#define PPI_CHENCLR_CH10_Pos (10UL) /*!< Position of CH10 field. */ +#define PPI_CHENCLR_CH10_Msk (0x1UL << PPI_CHENCLR_CH10_Pos) /*!< Bit mask of CH10 field. */ +#define PPI_CHENCLR_CH10_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH10_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH10_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 9 : Disable PPI channel 9. */ +#define PPI_CHENCLR_CH9_Pos (9UL) /*!< Position of CH9 field. */ +#define PPI_CHENCLR_CH9_Msk (0x1UL << PPI_CHENCLR_CH9_Pos) /*!< Bit mask of CH9 field. */ +#define PPI_CHENCLR_CH9_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH9_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH9_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 8 : Disable PPI channel 8. */ +#define PPI_CHENCLR_CH8_Pos (8UL) /*!< Position of CH8 field. */ +#define PPI_CHENCLR_CH8_Msk (0x1UL << PPI_CHENCLR_CH8_Pos) /*!< Bit mask of CH8 field. */ +#define PPI_CHENCLR_CH8_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH8_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH8_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 7 : Disable PPI channel 7. */ +#define PPI_CHENCLR_CH7_Pos (7UL) /*!< Position of CH7 field. */ +#define PPI_CHENCLR_CH7_Msk (0x1UL << PPI_CHENCLR_CH7_Pos) /*!< Bit mask of CH7 field. */ +#define PPI_CHENCLR_CH7_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH7_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH7_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 6 : Disable PPI channel 6. */ +#define PPI_CHENCLR_CH6_Pos (6UL) /*!< Position of CH6 field. */ +#define PPI_CHENCLR_CH6_Msk (0x1UL << PPI_CHENCLR_CH6_Pos) /*!< Bit mask of CH6 field. */ +#define PPI_CHENCLR_CH6_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH6_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH6_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 5 : Disable PPI channel 5. */ +#define PPI_CHENCLR_CH5_Pos (5UL) /*!< Position of CH5 field. */ +#define PPI_CHENCLR_CH5_Msk (0x1UL << PPI_CHENCLR_CH5_Pos) /*!< Bit mask of CH5 field. */ +#define PPI_CHENCLR_CH5_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH5_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH5_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 4 : Disable PPI channel 4. */ +#define PPI_CHENCLR_CH4_Pos (4UL) /*!< Position of CH4 field. */ +#define PPI_CHENCLR_CH4_Msk (0x1UL << PPI_CHENCLR_CH4_Pos) /*!< Bit mask of CH4 field. */ +#define PPI_CHENCLR_CH4_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH4_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH4_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 3 : Disable PPI channel 3. */ +#define PPI_CHENCLR_CH3_Pos (3UL) /*!< Position of CH3 field. */ +#define PPI_CHENCLR_CH3_Msk (0x1UL << PPI_CHENCLR_CH3_Pos) /*!< Bit mask of CH3 field. */ +#define PPI_CHENCLR_CH3_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH3_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH3_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 2 : Disable PPI channel 2. */ +#define PPI_CHENCLR_CH2_Pos (2UL) /*!< Position of CH2 field. */ +#define PPI_CHENCLR_CH2_Msk (0x1UL << PPI_CHENCLR_CH2_Pos) /*!< Bit mask of CH2 field. */ +#define PPI_CHENCLR_CH2_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH2_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH2_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 1 : Disable PPI channel 1. */ +#define PPI_CHENCLR_CH1_Pos (1UL) /*!< Position of CH1 field. */ +#define PPI_CHENCLR_CH1_Msk (0x1UL << PPI_CHENCLR_CH1_Pos) /*!< Bit mask of CH1 field. */ +#define PPI_CHENCLR_CH1_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH1_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH1_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 0 : Disable PPI channel 0. */ +#define PPI_CHENCLR_CH0_Pos (0UL) /*!< Position of CH0 field. */ +#define PPI_CHENCLR_CH0_Msk (0x1UL << PPI_CHENCLR_CH0_Pos) /*!< Bit mask of CH0 field. */ +#define PPI_CHENCLR_CH0_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH0_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH0_Clear (1UL) /*!< Disable channel on write. */ + +/* Register: PPI_CHG */ +/* Description: Channel group configuration. */ + +/* Bit 31 : Include CH31 in channel group. */ +#define PPI_CHG_CH31_Pos (31UL) /*!< Position of CH31 field. */ +#define PPI_CHG_CH31_Msk (0x1UL << PPI_CHG_CH31_Pos) /*!< Bit mask of CH31 field. */ +#define PPI_CHG_CH31_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH31_Included (1UL) /*!< Channel included. */ + +/* Bit 30 : Include CH30 in channel group. */ +#define PPI_CHG_CH30_Pos (30UL) /*!< Position of CH30 field. */ +#define PPI_CHG_CH30_Msk (0x1UL << PPI_CHG_CH30_Pos) /*!< Bit mask of CH30 field. */ +#define PPI_CHG_CH30_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH30_Included (1UL) /*!< Channel included. */ + +/* Bit 29 : Include CH29 in channel group. */ +#define PPI_CHG_CH29_Pos (29UL) /*!< Position of CH29 field. */ +#define PPI_CHG_CH29_Msk (0x1UL << PPI_CHG_CH29_Pos) /*!< Bit mask of CH29 field. */ +#define PPI_CHG_CH29_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH29_Included (1UL) /*!< Channel included. */ + +/* Bit 28 : Include CH28 in channel group. */ +#define PPI_CHG_CH28_Pos (28UL) /*!< Position of CH28 field. */ +#define PPI_CHG_CH28_Msk (0x1UL << PPI_CHG_CH28_Pos) /*!< Bit mask of CH28 field. */ +#define PPI_CHG_CH28_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH28_Included (1UL) /*!< Channel included. */ + +/* Bit 27 : Include CH27 in channel group. */ +#define PPI_CHG_CH27_Pos (27UL) /*!< Position of CH27 field. */ +#define PPI_CHG_CH27_Msk (0x1UL << PPI_CHG_CH27_Pos) /*!< Bit mask of CH27 field. */ +#define PPI_CHG_CH27_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH27_Included (1UL) /*!< Channel included. */ + +/* Bit 26 : Include CH26 in channel group. */ +#define PPI_CHG_CH26_Pos (26UL) /*!< Position of CH26 field. */ +#define PPI_CHG_CH26_Msk (0x1UL << PPI_CHG_CH26_Pos) /*!< Bit mask of CH26 field. */ +#define PPI_CHG_CH26_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH26_Included (1UL) /*!< Channel included. */ + +/* Bit 25 : Include CH25 in channel group. */ +#define PPI_CHG_CH25_Pos (25UL) /*!< Position of CH25 field. */ +#define PPI_CHG_CH25_Msk (0x1UL << PPI_CHG_CH25_Pos) /*!< Bit mask of CH25 field. */ +#define PPI_CHG_CH25_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH25_Included (1UL) /*!< Channel included. */ + +/* Bit 24 : Include CH24 in channel group. */ +#define PPI_CHG_CH24_Pos (24UL) /*!< Position of CH24 field. */ +#define PPI_CHG_CH24_Msk (0x1UL << PPI_CHG_CH24_Pos) /*!< Bit mask of CH24 field. */ +#define PPI_CHG_CH24_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH24_Included (1UL) /*!< Channel included. */ + +/* Bit 23 : Include CH23 in channel group. */ +#define PPI_CHG_CH23_Pos (23UL) /*!< Position of CH23 field. */ +#define PPI_CHG_CH23_Msk (0x1UL << PPI_CHG_CH23_Pos) /*!< Bit mask of CH23 field. */ +#define PPI_CHG_CH23_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH23_Included (1UL) /*!< Channel included. */ + +/* Bit 22 : Include CH22 in channel group. */ +#define PPI_CHG_CH22_Pos (22UL) /*!< Position of CH22 field. */ +#define PPI_CHG_CH22_Msk (0x1UL << PPI_CHG_CH22_Pos) /*!< Bit mask of CH22 field. */ +#define PPI_CHG_CH22_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH22_Included (1UL) /*!< Channel included. */ + +/* Bit 21 : Include CH21 in channel group. */ +#define PPI_CHG_CH21_Pos (21UL) /*!< Position of CH21 field. */ +#define PPI_CHG_CH21_Msk (0x1UL << PPI_CHG_CH21_Pos) /*!< Bit mask of CH21 field. */ +#define PPI_CHG_CH21_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH21_Included (1UL) /*!< Channel included. */ + +/* Bit 20 : Include CH20 in channel group. */ +#define PPI_CHG_CH20_Pos (20UL) /*!< Position of CH20 field. */ +#define PPI_CHG_CH20_Msk (0x1UL << PPI_CHG_CH20_Pos) /*!< Bit mask of CH20 field. */ +#define PPI_CHG_CH20_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH20_Included (1UL) /*!< Channel included. */ + +/* Bit 15 : Include CH15 in channel group. */ +#define PPI_CHG_CH15_Pos (15UL) /*!< Position of CH15 field. */ +#define PPI_CHG_CH15_Msk (0x1UL << PPI_CHG_CH15_Pos) /*!< Bit mask of CH15 field. */ +#define PPI_CHG_CH15_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH15_Included (1UL) /*!< Channel included. */ + +/* Bit 14 : Include CH14 in channel group. */ +#define PPI_CHG_CH14_Pos (14UL) /*!< Position of CH14 field. */ +#define PPI_CHG_CH14_Msk (0x1UL << PPI_CHG_CH14_Pos) /*!< Bit mask of CH14 field. */ +#define PPI_CHG_CH14_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH14_Included (1UL) /*!< Channel included. */ + +/* Bit 13 : Include CH13 in channel group. */ +#define PPI_CHG_CH13_Pos (13UL) /*!< Position of CH13 field. */ +#define PPI_CHG_CH13_Msk (0x1UL << PPI_CHG_CH13_Pos) /*!< Bit mask of CH13 field. */ +#define PPI_CHG_CH13_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH13_Included (1UL) /*!< Channel included. */ + +/* Bit 12 : Include CH12 in channel group. */ +#define PPI_CHG_CH12_Pos (12UL) /*!< Position of CH12 field. */ +#define PPI_CHG_CH12_Msk (0x1UL << PPI_CHG_CH12_Pos) /*!< Bit mask of CH12 field. */ +#define PPI_CHG_CH12_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH12_Included (1UL) /*!< Channel included. */ + +/* Bit 11 : Include CH11 in channel group. */ +#define PPI_CHG_CH11_Pos (11UL) /*!< Position of CH11 field. */ +#define PPI_CHG_CH11_Msk (0x1UL << PPI_CHG_CH11_Pos) /*!< Bit mask of CH11 field. */ +#define PPI_CHG_CH11_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH11_Included (1UL) /*!< Channel included. */ + +/* Bit 10 : Include CH10 in channel group. */ +#define PPI_CHG_CH10_Pos (10UL) /*!< Position of CH10 field. */ +#define PPI_CHG_CH10_Msk (0x1UL << PPI_CHG_CH10_Pos) /*!< Bit mask of CH10 field. */ +#define PPI_CHG_CH10_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH10_Included (1UL) /*!< Channel included. */ + +/* Bit 9 : Include CH9 in channel group. */ +#define PPI_CHG_CH9_Pos (9UL) /*!< Position of CH9 field. */ +#define PPI_CHG_CH9_Msk (0x1UL << PPI_CHG_CH9_Pos) /*!< Bit mask of CH9 field. */ +#define PPI_CHG_CH9_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH9_Included (1UL) /*!< Channel included. */ + +/* Bit 8 : Include CH8 in channel group. */ +#define PPI_CHG_CH8_Pos (8UL) /*!< Position of CH8 field. */ +#define PPI_CHG_CH8_Msk (0x1UL << PPI_CHG_CH8_Pos) /*!< Bit mask of CH8 field. */ +#define PPI_CHG_CH8_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH8_Included (1UL) /*!< Channel included. */ + +/* Bit 7 : Include CH7 in channel group. */ +#define PPI_CHG_CH7_Pos (7UL) /*!< Position of CH7 field. */ +#define PPI_CHG_CH7_Msk (0x1UL << PPI_CHG_CH7_Pos) /*!< Bit mask of CH7 field. */ +#define PPI_CHG_CH7_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH7_Included (1UL) /*!< Channel included. */ + +/* Bit 6 : Include CH6 in channel group. */ +#define PPI_CHG_CH6_Pos (6UL) /*!< Position of CH6 field. */ +#define PPI_CHG_CH6_Msk (0x1UL << PPI_CHG_CH6_Pos) /*!< Bit mask of CH6 field. */ +#define PPI_CHG_CH6_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH6_Included (1UL) /*!< Channel included. */ + +/* Bit 5 : Include CH5 in channel group. */ +#define PPI_CHG_CH5_Pos (5UL) /*!< Position of CH5 field. */ +#define PPI_CHG_CH5_Msk (0x1UL << PPI_CHG_CH5_Pos) /*!< Bit mask of CH5 field. */ +#define PPI_CHG_CH5_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH5_Included (1UL) /*!< Channel included. */ + +/* Bit 4 : Include CH4 in channel group. */ +#define PPI_CHG_CH4_Pos (4UL) /*!< Position of CH4 field. */ +#define PPI_CHG_CH4_Msk (0x1UL << PPI_CHG_CH4_Pos) /*!< Bit mask of CH4 field. */ +#define PPI_CHG_CH4_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH4_Included (1UL) /*!< Channel included. */ + +/* Bit 3 : Include CH3 in channel group. */ +#define PPI_CHG_CH3_Pos (3UL) /*!< Position of CH3 field. */ +#define PPI_CHG_CH3_Msk (0x1UL << PPI_CHG_CH3_Pos) /*!< Bit mask of CH3 field. */ +#define PPI_CHG_CH3_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH3_Included (1UL) /*!< Channel included. */ + +/* Bit 2 : Include CH2 in channel group. */ +#define PPI_CHG_CH2_Pos (2UL) /*!< Position of CH2 field. */ +#define PPI_CHG_CH2_Msk (0x1UL << PPI_CHG_CH2_Pos) /*!< Bit mask of CH2 field. */ +#define PPI_CHG_CH2_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH2_Included (1UL) /*!< Channel included. */ + +/* Bit 1 : Include CH1 in channel group. */ +#define PPI_CHG_CH1_Pos (1UL) /*!< Position of CH1 field. */ +#define PPI_CHG_CH1_Msk (0x1UL << PPI_CHG_CH1_Pos) /*!< Bit mask of CH1 field. */ +#define PPI_CHG_CH1_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH1_Included (1UL) /*!< Channel included. */ + +/* Bit 0 : Include CH0 in channel group. */ +#define PPI_CHG_CH0_Pos (0UL) /*!< Position of CH0 field. */ +#define PPI_CHG_CH0_Msk (0x1UL << PPI_CHG_CH0_Pos) /*!< Bit mask of CH0 field. */ +#define PPI_CHG_CH0_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH0_Included (1UL) /*!< Channel included. */ + + +/* Peripheral: PU */ +/* Description: Patch unit. */ + +/* Register: PU_PATCHADDR */ +/* Description: Relative address of patch instructions. */ + +/* Bits 24..0 : Relative address of patch instructions. */ +#define PU_PATCHADDR_PATCHADDR_Pos (0UL) /*!< Position of PATCHADDR field. */ +#define PU_PATCHADDR_PATCHADDR_Msk (0x1FFFFFFUL << PU_PATCHADDR_PATCHADDR_Pos) /*!< Bit mask of PATCHADDR field. */ + +/* Register: PU_PATCHEN */ +/* Description: Patch enable register. */ + +/* Bit 7 : Patch 7 enabled. */ +#define PU_PATCHEN_PATCH7_Pos (7UL) /*!< Position of PATCH7 field. */ +#define PU_PATCHEN_PATCH7_Msk (0x1UL << PU_PATCHEN_PATCH7_Pos) /*!< Bit mask of PATCH7 field. */ +#define PU_PATCHEN_PATCH7_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH7_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 6 : Patch 6 enabled. */ +#define PU_PATCHEN_PATCH6_Pos (6UL) /*!< Position of PATCH6 field. */ +#define PU_PATCHEN_PATCH6_Msk (0x1UL << PU_PATCHEN_PATCH6_Pos) /*!< Bit mask of PATCH6 field. */ +#define PU_PATCHEN_PATCH6_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH6_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 5 : Patch 5 enabled. */ +#define PU_PATCHEN_PATCH5_Pos (5UL) /*!< Position of PATCH5 field. */ +#define PU_PATCHEN_PATCH5_Msk (0x1UL << PU_PATCHEN_PATCH5_Pos) /*!< Bit mask of PATCH5 field. */ +#define PU_PATCHEN_PATCH5_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH5_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 4 : Patch 4 enabled. */ +#define PU_PATCHEN_PATCH4_Pos (4UL) /*!< Position of PATCH4 field. */ +#define PU_PATCHEN_PATCH4_Msk (0x1UL << PU_PATCHEN_PATCH4_Pos) /*!< Bit mask of PATCH4 field. */ +#define PU_PATCHEN_PATCH4_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH4_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 3 : Patch 3 enabled. */ +#define PU_PATCHEN_PATCH3_Pos (3UL) /*!< Position of PATCH3 field. */ +#define PU_PATCHEN_PATCH3_Msk (0x1UL << PU_PATCHEN_PATCH3_Pos) /*!< Bit mask of PATCH3 field. */ +#define PU_PATCHEN_PATCH3_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH3_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 2 : Patch 2 enabled. */ +#define PU_PATCHEN_PATCH2_Pos (2UL) /*!< Position of PATCH2 field. */ +#define PU_PATCHEN_PATCH2_Msk (0x1UL << PU_PATCHEN_PATCH2_Pos) /*!< Bit mask of PATCH2 field. */ +#define PU_PATCHEN_PATCH2_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH2_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 1 : Patch 1 enabled. */ +#define PU_PATCHEN_PATCH1_Pos (1UL) /*!< Position of PATCH1 field. */ +#define PU_PATCHEN_PATCH1_Msk (0x1UL << PU_PATCHEN_PATCH1_Pos) /*!< Bit mask of PATCH1 field. */ +#define PU_PATCHEN_PATCH1_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH1_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 0 : Patch 0 enabled. */ +#define PU_PATCHEN_PATCH0_Pos (0UL) /*!< Position of PATCH0 field. */ +#define PU_PATCHEN_PATCH0_Msk (0x1UL << PU_PATCHEN_PATCH0_Pos) /*!< Bit mask of PATCH0 field. */ +#define PU_PATCHEN_PATCH0_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH0_Enabled (1UL) /*!< Patch enabled. */ + +/* Register: PU_PATCHENSET */ +/* Description: Patch enable register. */ + +/* Bit 7 : Patch 7 enabled. */ +#define PU_PATCHENSET_PATCH7_Pos (7UL) /*!< Position of PATCH7 field. */ +#define PU_PATCHENSET_PATCH7_Msk (0x1UL << PU_PATCHENSET_PATCH7_Pos) /*!< Bit mask of PATCH7 field. */ +#define PU_PATCHENSET_PATCH7_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH7_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH7_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 6 : Patch 6 enabled. */ +#define PU_PATCHENSET_PATCH6_Pos (6UL) /*!< Position of PATCH6 field. */ +#define PU_PATCHENSET_PATCH6_Msk (0x1UL << PU_PATCHENSET_PATCH6_Pos) /*!< Bit mask of PATCH6 field. */ +#define PU_PATCHENSET_PATCH6_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH6_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH6_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 5 : Patch 5 enabled. */ +#define PU_PATCHENSET_PATCH5_Pos (5UL) /*!< Position of PATCH5 field. */ +#define PU_PATCHENSET_PATCH5_Msk (0x1UL << PU_PATCHENSET_PATCH5_Pos) /*!< Bit mask of PATCH5 field. */ +#define PU_PATCHENSET_PATCH5_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH5_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH5_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 4 : Patch 4 enabled. */ +#define PU_PATCHENSET_PATCH4_Pos (4UL) /*!< Position of PATCH4 field. */ +#define PU_PATCHENSET_PATCH4_Msk (0x1UL << PU_PATCHENSET_PATCH4_Pos) /*!< Bit mask of PATCH4 field. */ +#define PU_PATCHENSET_PATCH4_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH4_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH4_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 3 : Patch 3 enabled. */ +#define PU_PATCHENSET_PATCH3_Pos (3UL) /*!< Position of PATCH3 field. */ +#define PU_PATCHENSET_PATCH3_Msk (0x1UL << PU_PATCHENSET_PATCH3_Pos) /*!< Bit mask of PATCH3 field. */ +#define PU_PATCHENSET_PATCH3_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH3_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH3_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 2 : Patch 2 enabled. */ +#define PU_PATCHENSET_PATCH2_Pos (2UL) /*!< Position of PATCH2 field. */ +#define PU_PATCHENSET_PATCH2_Msk (0x1UL << PU_PATCHENSET_PATCH2_Pos) /*!< Bit mask of PATCH2 field. */ +#define PU_PATCHENSET_PATCH2_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH2_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH2_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 1 : Patch 1 enabled. */ +#define PU_PATCHENSET_PATCH1_Pos (1UL) /*!< Position of PATCH1 field. */ +#define PU_PATCHENSET_PATCH1_Msk (0x1UL << PU_PATCHENSET_PATCH1_Pos) /*!< Bit mask of PATCH1 field. */ +#define PU_PATCHENSET_PATCH1_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH1_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH1_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 0 : Patch 0 enabled. */ +#define PU_PATCHENSET_PATCH0_Pos (0UL) /*!< Position of PATCH0 field. */ +#define PU_PATCHENSET_PATCH0_Msk (0x1UL << PU_PATCHENSET_PATCH0_Pos) /*!< Bit mask of PATCH0 field. */ +#define PU_PATCHENSET_PATCH0_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH0_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH0_Set (1UL) /*!< Enable patch on write. */ + +/* Register: PU_PATCHENCLR */ +/* Description: Patch disable register. */ + +/* Bit 7 : Patch 7 enabled. */ +#define PU_PATCHENCLR_PATCH7_Pos (7UL) /*!< Position of PATCH7 field. */ +#define PU_PATCHENCLR_PATCH7_Msk (0x1UL << PU_PATCHENCLR_PATCH7_Pos) /*!< Bit mask of PATCH7 field. */ +#define PU_PATCHENCLR_PATCH7_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH7_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH7_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 6 : Patch 6 enabled. */ +#define PU_PATCHENCLR_PATCH6_Pos (6UL) /*!< Position of PATCH6 field. */ +#define PU_PATCHENCLR_PATCH6_Msk (0x1UL << PU_PATCHENCLR_PATCH6_Pos) /*!< Bit mask of PATCH6 field. */ +#define PU_PATCHENCLR_PATCH6_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH6_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH6_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 5 : Patch 5 enabled. */ +#define PU_PATCHENCLR_PATCH5_Pos (5UL) /*!< Position of PATCH5 field. */ +#define PU_PATCHENCLR_PATCH5_Msk (0x1UL << PU_PATCHENCLR_PATCH5_Pos) /*!< Bit mask of PATCH5 field. */ +#define PU_PATCHENCLR_PATCH5_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH5_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH5_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 4 : Patch 4 enabled. */ +#define PU_PATCHENCLR_PATCH4_Pos (4UL) /*!< Position of PATCH4 field. */ +#define PU_PATCHENCLR_PATCH4_Msk (0x1UL << PU_PATCHENCLR_PATCH4_Pos) /*!< Bit mask of PATCH4 field. */ +#define PU_PATCHENCLR_PATCH4_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH4_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH4_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 3 : Patch 3 enabled. */ +#define PU_PATCHENCLR_PATCH3_Pos (3UL) /*!< Position of PATCH3 field. */ +#define PU_PATCHENCLR_PATCH3_Msk (0x1UL << PU_PATCHENCLR_PATCH3_Pos) /*!< Bit mask of PATCH3 field. */ +#define PU_PATCHENCLR_PATCH3_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH3_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH3_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 2 : Patch 2 enabled. */ +#define PU_PATCHENCLR_PATCH2_Pos (2UL) /*!< Position of PATCH2 field. */ +#define PU_PATCHENCLR_PATCH2_Msk (0x1UL << PU_PATCHENCLR_PATCH2_Pos) /*!< Bit mask of PATCH2 field. */ +#define PU_PATCHENCLR_PATCH2_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH2_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH2_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 1 : Patch 1 enabled. */ +#define PU_PATCHENCLR_PATCH1_Pos (1UL) /*!< Position of PATCH1 field. */ +#define PU_PATCHENCLR_PATCH1_Msk (0x1UL << PU_PATCHENCLR_PATCH1_Pos) /*!< Bit mask of PATCH1 field. */ +#define PU_PATCHENCLR_PATCH1_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH1_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH1_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 0 : Patch 0 enabled. */ +#define PU_PATCHENCLR_PATCH0_Pos (0UL) /*!< Position of PATCH0 field. */ +#define PU_PATCHENCLR_PATCH0_Msk (0x1UL << PU_PATCHENCLR_PATCH0_Pos) /*!< Bit mask of PATCH0 field. */ +#define PU_PATCHENCLR_PATCH0_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH0_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH0_Clear (1UL) /*!< Disable patch on write. */ + + +/* Peripheral: QDEC */ +/* Description: Rotary decoder. */ + +/* Register: QDEC_SHORTS */ +/* Description: Shortcuts for the QDEC. */ + +/* Bit 1 : Shortcut between SAMPLERDY event and STOP task. */ +#define QDEC_SHORTS_SAMPLERDY_STOP_Pos (1UL) /*!< Position of SAMPLERDY_STOP field. */ +#define QDEC_SHORTS_SAMPLERDY_STOP_Msk (0x1UL << QDEC_SHORTS_SAMPLERDY_STOP_Pos) /*!< Bit mask of SAMPLERDY_STOP field. */ +#define QDEC_SHORTS_SAMPLERDY_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define QDEC_SHORTS_SAMPLERDY_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 0 : Shortcut between REPORTRDY event and READCLRACC task. */ +#define QDEC_SHORTS_REPORTRDY_READCLRACC_Pos (0UL) /*!< Position of REPORTRDY_READCLRACC field. */ +#define QDEC_SHORTS_REPORTRDY_READCLRACC_Msk (0x1UL << QDEC_SHORTS_REPORTRDY_READCLRACC_Pos) /*!< Bit mask of REPORTRDY_READCLRACC field. */ +#define QDEC_SHORTS_REPORTRDY_READCLRACC_Disabled (0UL) /*!< Shortcut disabled. */ +#define QDEC_SHORTS_REPORTRDY_READCLRACC_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: QDEC_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 2 : Enable interrupt on ACCOF event. */ +#define QDEC_INTENSET_ACCOF_Pos (2UL) /*!< Position of ACCOF field. */ +#define QDEC_INTENSET_ACCOF_Msk (0x1UL << QDEC_INTENSET_ACCOF_Pos) /*!< Bit mask of ACCOF field. */ +#define QDEC_INTENSET_ACCOF_Disabled (0UL) /*!< Interrupt disabled. */ +#define QDEC_INTENSET_ACCOF_Enabled (1UL) /*!< Interrupt enabled. */ +#define QDEC_INTENSET_ACCOF_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on REPORTRDY event. */ +#define QDEC_INTENSET_REPORTRDY_Pos (1UL) /*!< Position of REPORTRDY field. */ +#define QDEC_INTENSET_REPORTRDY_Msk (0x1UL << QDEC_INTENSET_REPORTRDY_Pos) /*!< Bit mask of REPORTRDY field. */ +#define QDEC_INTENSET_REPORTRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define QDEC_INTENSET_REPORTRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define QDEC_INTENSET_REPORTRDY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on SAMPLERDY event. */ +#define QDEC_INTENSET_SAMPLERDY_Pos (0UL) /*!< Position of SAMPLERDY field. */ +#define QDEC_INTENSET_SAMPLERDY_Msk (0x1UL << QDEC_INTENSET_SAMPLERDY_Pos) /*!< Bit mask of SAMPLERDY field. */ +#define QDEC_INTENSET_SAMPLERDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define QDEC_INTENSET_SAMPLERDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define QDEC_INTENSET_SAMPLERDY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: QDEC_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 2 : Disable interrupt on ACCOF event. */ +#define QDEC_INTENCLR_ACCOF_Pos (2UL) /*!< Position of ACCOF field. */ +#define QDEC_INTENCLR_ACCOF_Msk (0x1UL << QDEC_INTENCLR_ACCOF_Pos) /*!< Bit mask of ACCOF field. */ +#define QDEC_INTENCLR_ACCOF_Disabled (0UL) /*!< Interrupt disabled. */ +#define QDEC_INTENCLR_ACCOF_Enabled (1UL) /*!< Interrupt enabled. */ +#define QDEC_INTENCLR_ACCOF_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on REPORTRDY event. */ +#define QDEC_INTENCLR_REPORTRDY_Pos (1UL) /*!< Position of REPORTRDY field. */ +#define QDEC_INTENCLR_REPORTRDY_Msk (0x1UL << QDEC_INTENCLR_REPORTRDY_Pos) /*!< Bit mask of REPORTRDY field. */ +#define QDEC_INTENCLR_REPORTRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define QDEC_INTENCLR_REPORTRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define QDEC_INTENCLR_REPORTRDY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on SAMPLERDY event. */ +#define QDEC_INTENCLR_SAMPLERDY_Pos (0UL) /*!< Position of SAMPLERDY field. */ +#define QDEC_INTENCLR_SAMPLERDY_Msk (0x1UL << QDEC_INTENCLR_SAMPLERDY_Pos) /*!< Bit mask of SAMPLERDY field. */ +#define QDEC_INTENCLR_SAMPLERDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define QDEC_INTENCLR_SAMPLERDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define QDEC_INTENCLR_SAMPLERDY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: QDEC_ENABLE */ +/* Description: Enable the QDEC. */ + +/* Bit 0 : Enable or disable QDEC. */ +#define QDEC_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define QDEC_ENABLE_ENABLE_Msk (0x1UL << QDEC_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define QDEC_ENABLE_ENABLE_Disabled (0UL) /*!< Disabled QDEC. */ +#define QDEC_ENABLE_ENABLE_Enabled (1UL) /*!< Enable QDEC. */ + +/* Register: QDEC_LEDPOL */ +/* Description: LED output pin polarity. */ + +/* Bit 0 : LED output pin polarity. */ +#define QDEC_LEDPOL_LEDPOL_Pos (0UL) /*!< Position of LEDPOL field. */ +#define QDEC_LEDPOL_LEDPOL_Msk (0x1UL << QDEC_LEDPOL_LEDPOL_Pos) /*!< Bit mask of LEDPOL field. */ +#define QDEC_LEDPOL_LEDPOL_ActiveLow (0UL) /*!< LED output is active low. */ +#define QDEC_LEDPOL_LEDPOL_ActiveHigh (1UL) /*!< LED output is active high. */ + +/* Register: QDEC_SAMPLEPER */ +/* Description: Sample period. */ + +/* Bits 2..0 : Sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_Pos (0UL) /*!< Position of SAMPLEPER field. */ +#define QDEC_SAMPLEPER_SAMPLEPER_Msk (0x7UL << QDEC_SAMPLEPER_SAMPLEPER_Pos) /*!< Bit mask of SAMPLEPER field. */ +#define QDEC_SAMPLEPER_SAMPLEPER_128us (0x00UL) /*!< 128us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_256us (0x01UL) /*!< 256us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_512us (0x02UL) /*!< 512us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_1024us (0x03UL) /*!< 1024us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_2048us (0x04UL) /*!< 2048us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_4096us (0x05UL) /*!< 4096us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_8192us (0x06UL) /*!< 8192us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_16384us (0x07UL) /*!< 16384us sample period. */ + +/* Register: QDEC_SAMPLE */ +/* Description: Motion sample value. */ + +/* Bits 31..0 : Last sample taken in compliment to 2. */ +#define QDEC_SAMPLE_SAMPLE_Pos (0UL) /*!< Position of SAMPLE field. */ +#define QDEC_SAMPLE_SAMPLE_Msk (0xFFFFFFFFUL << QDEC_SAMPLE_SAMPLE_Pos) /*!< Bit mask of SAMPLE field. */ + +/* Register: QDEC_REPORTPER */ +/* Description: Number of samples to generate an EVENT_REPORTRDY. */ + +/* Bits 2..0 : Number of samples to generate an EVENT_REPORTRDY. */ +#define QDEC_REPORTPER_REPORTPER_Pos (0UL) /*!< Position of REPORTPER field. */ +#define QDEC_REPORTPER_REPORTPER_Msk (0x7UL << QDEC_REPORTPER_REPORTPER_Pos) /*!< Bit mask of REPORTPER field. */ +#define QDEC_REPORTPER_REPORTPER_10Smpl (0x00UL) /*!< 10 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_40Smpl (0x01UL) /*!< 40 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_80Smpl (0x02UL) /*!< 80 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_120Smpl (0x03UL) /*!< 120 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_160Smpl (0x04UL) /*!< 160 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_200Smpl (0x05UL) /*!< 200 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_240Smpl (0x06UL) /*!< 240 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_280Smpl (0x07UL) /*!< 280 samples per report. */ + +/* Register: QDEC_DBFEN */ +/* Description: Enable debouncer input filters. */ + +/* Bit 0 : Enable debounce input filters. */ +#define QDEC_DBFEN_DBFEN_Pos (0UL) /*!< Position of DBFEN field. */ +#define QDEC_DBFEN_DBFEN_Msk (0x1UL << QDEC_DBFEN_DBFEN_Pos) /*!< Bit mask of DBFEN field. */ +#define QDEC_DBFEN_DBFEN_Disabled (0UL) /*!< Debounce input filters disabled. */ +#define QDEC_DBFEN_DBFEN_Enabled (1UL) /*!< Debounce input filters enabled. */ + +/* Register: QDEC_LEDPRE */ +/* Description: Time LED is switched ON before the sample. */ + +/* Bits 8..0 : Period in us the LED in switched on prior to sampling. */ +#define QDEC_LEDPRE_LEDPRE_Pos (0UL) /*!< Position of LEDPRE field. */ +#define QDEC_LEDPRE_LEDPRE_Msk (0x1FFUL << QDEC_LEDPRE_LEDPRE_Pos) /*!< Bit mask of LEDPRE field. */ + +/* Register: QDEC_ACCDBL */ +/* Description: Accumulated double (error) transitions register. */ + +/* Bits 3..0 : Accumulated double (error) transitions. */ +#define QDEC_ACCDBL_ACCDBL_Pos (0UL) /*!< Position of ACCDBL field. */ +#define QDEC_ACCDBL_ACCDBL_Msk (0xFUL << QDEC_ACCDBL_ACCDBL_Pos) /*!< Bit mask of ACCDBL field. */ + +/* Register: QDEC_ACCDBLREAD */ +/* Description: Snapshot of ACCDBL register. Value generated by the TASKS_READCLEACC task. */ + +/* Bits 3..0 : Snapshot of accumulated double (error) transitions. */ +#define QDEC_ACCDBLREAD_ACCDBLREAD_Pos (0UL) /*!< Position of ACCDBLREAD field. */ +#define QDEC_ACCDBLREAD_ACCDBLREAD_Msk (0xFUL << QDEC_ACCDBLREAD_ACCDBLREAD_Pos) /*!< Bit mask of ACCDBLREAD field. */ + +/* Register: QDEC_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define QDEC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define QDEC_POWER_POWER_Msk (0x1UL << QDEC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define QDEC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define QDEC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: RADIO */ +/* Description: The radio. */ + +/* Register: RADIO_SHORTS */ +/* Description: Shortcuts for the radio. */ + +/* Bit 8 : Shortcut between DISABLED event and RSSISTOP task. */ +#define RADIO_SHORTS_DISABLED_RSSISTOP_Pos (8UL) /*!< Position of DISABLED_RSSISTOP field. */ +#define RADIO_SHORTS_DISABLED_RSSISTOP_Msk (0x1UL << RADIO_SHORTS_DISABLED_RSSISTOP_Pos) /*!< Bit mask of DISABLED_RSSISTOP field. */ +#define RADIO_SHORTS_DISABLED_RSSISTOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_DISABLED_RSSISTOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 6 : Shortcut between ADDRESS event and BCSTART task. */ +#define RADIO_SHORTS_ADDRESS_BCSTART_Pos (6UL) /*!< Position of ADDRESS_BCSTART field. */ +#define RADIO_SHORTS_ADDRESS_BCSTART_Msk (0x1UL << RADIO_SHORTS_ADDRESS_BCSTART_Pos) /*!< Bit mask of ADDRESS_BCSTART field. */ +#define RADIO_SHORTS_ADDRESS_BCSTART_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_ADDRESS_BCSTART_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 5 : Shortcut between END event and START task. */ +#define RADIO_SHORTS_END_START_Pos (5UL) /*!< Position of END_START field. */ +#define RADIO_SHORTS_END_START_Msk (0x1UL << RADIO_SHORTS_END_START_Pos) /*!< Bit mask of END_START field. */ +#define RADIO_SHORTS_END_START_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_END_START_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 4 : Shortcut between ADDRESS event and RSSISTART task. */ +#define RADIO_SHORTS_ADDRESS_RSSISTART_Pos (4UL) /*!< Position of ADDRESS_RSSISTART field. */ +#define RADIO_SHORTS_ADDRESS_RSSISTART_Msk (0x1UL << RADIO_SHORTS_ADDRESS_RSSISTART_Pos) /*!< Bit mask of ADDRESS_RSSISTART field. */ +#define RADIO_SHORTS_ADDRESS_RSSISTART_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_ADDRESS_RSSISTART_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 3 : Shortcut between DISABLED event and RXEN task. */ +#define RADIO_SHORTS_DISABLED_RXEN_Pos (3UL) /*!< Position of DISABLED_RXEN field. */ +#define RADIO_SHORTS_DISABLED_RXEN_Msk (0x1UL << RADIO_SHORTS_DISABLED_RXEN_Pos) /*!< Bit mask of DISABLED_RXEN field. */ +#define RADIO_SHORTS_DISABLED_RXEN_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_DISABLED_RXEN_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 2 : Shortcut between DISABLED event and TXEN task. */ +#define RADIO_SHORTS_DISABLED_TXEN_Pos (2UL) /*!< Position of DISABLED_TXEN field. */ +#define RADIO_SHORTS_DISABLED_TXEN_Msk (0x1UL << RADIO_SHORTS_DISABLED_TXEN_Pos) /*!< Bit mask of DISABLED_TXEN field. */ +#define RADIO_SHORTS_DISABLED_TXEN_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_DISABLED_TXEN_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 1 : Shortcut between END event and DISABLE task. */ +#define RADIO_SHORTS_END_DISABLE_Pos (1UL) /*!< Position of END_DISABLE field. */ +#define RADIO_SHORTS_END_DISABLE_Msk (0x1UL << RADIO_SHORTS_END_DISABLE_Pos) /*!< Bit mask of END_DISABLE field. */ +#define RADIO_SHORTS_END_DISABLE_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_END_DISABLE_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 0 : Shortcut between READY event and START task. */ +#define RADIO_SHORTS_READY_START_Pos (0UL) /*!< Position of READY_START field. */ +#define RADIO_SHORTS_READY_START_Msk (0x1UL << RADIO_SHORTS_READY_START_Pos) /*!< Bit mask of READY_START field. */ +#define RADIO_SHORTS_READY_START_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_READY_START_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: RADIO_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 10 : Enable interrupt on BCMATCH event. */ +#define RADIO_INTENSET_BCMATCH_Pos (10UL) /*!< Position of BCMATCH field. */ +#define RADIO_INTENSET_BCMATCH_Msk (0x1UL << RADIO_INTENSET_BCMATCH_Pos) /*!< Bit mask of BCMATCH field. */ +#define RADIO_INTENSET_BCMATCH_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_BCMATCH_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_BCMATCH_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 7 : Enable interrupt on RSSIEND event. */ +#define RADIO_INTENSET_RSSIEND_Pos (7UL) /*!< Position of RSSIEND field. */ +#define RADIO_INTENSET_RSSIEND_Msk (0x1UL << RADIO_INTENSET_RSSIEND_Pos) /*!< Bit mask of RSSIEND field. */ +#define RADIO_INTENSET_RSSIEND_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_RSSIEND_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_RSSIEND_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 6 : Enable interrupt on DEVMISS event. */ +#define RADIO_INTENSET_DEVMISS_Pos (6UL) /*!< Position of DEVMISS field. */ +#define RADIO_INTENSET_DEVMISS_Msk (0x1UL << RADIO_INTENSET_DEVMISS_Pos) /*!< Bit mask of DEVMISS field. */ +#define RADIO_INTENSET_DEVMISS_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_DEVMISS_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_DEVMISS_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 5 : Enable interrupt on DEVMATCH event. */ +#define RADIO_INTENSET_DEVMATCH_Pos (5UL) /*!< Position of DEVMATCH field. */ +#define RADIO_INTENSET_DEVMATCH_Msk (0x1UL << RADIO_INTENSET_DEVMATCH_Pos) /*!< Bit mask of DEVMATCH field. */ +#define RADIO_INTENSET_DEVMATCH_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_DEVMATCH_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_DEVMATCH_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 4 : Enable interrupt on DISABLED event. */ +#define RADIO_INTENSET_DISABLED_Pos (4UL) /*!< Position of DISABLED field. */ +#define RADIO_INTENSET_DISABLED_Msk (0x1UL << RADIO_INTENSET_DISABLED_Pos) /*!< Bit mask of DISABLED field. */ +#define RADIO_INTENSET_DISABLED_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_DISABLED_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_DISABLED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 3 : Enable interrupt on END event. */ +#define RADIO_INTENSET_END_Pos (3UL) /*!< Position of END field. */ +#define RADIO_INTENSET_END_Msk (0x1UL << RADIO_INTENSET_END_Pos) /*!< Bit mask of END field. */ +#define RADIO_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 2 : Enable interrupt on PAYLOAD event. */ +#define RADIO_INTENSET_PAYLOAD_Pos (2UL) /*!< Position of PAYLOAD field. */ +#define RADIO_INTENSET_PAYLOAD_Msk (0x1UL << RADIO_INTENSET_PAYLOAD_Pos) /*!< Bit mask of PAYLOAD field. */ +#define RADIO_INTENSET_PAYLOAD_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_PAYLOAD_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_PAYLOAD_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on ADDRESS event. */ +#define RADIO_INTENSET_ADDRESS_Pos (1UL) /*!< Position of ADDRESS field. */ +#define RADIO_INTENSET_ADDRESS_Msk (0x1UL << RADIO_INTENSET_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */ +#define RADIO_INTENSET_ADDRESS_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_ADDRESS_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_ADDRESS_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on READY event. */ +#define RADIO_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */ +#define RADIO_INTENSET_READY_Msk (0x1UL << RADIO_INTENSET_READY_Pos) /*!< Bit mask of READY field. */ +#define RADIO_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: RADIO_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 10 : Disable interrupt on BCMATCH event. */ +#define RADIO_INTENCLR_BCMATCH_Pos (10UL) /*!< Position of BCMATCH field. */ +#define RADIO_INTENCLR_BCMATCH_Msk (0x1UL << RADIO_INTENCLR_BCMATCH_Pos) /*!< Bit mask of BCMATCH field. */ +#define RADIO_INTENCLR_BCMATCH_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_BCMATCH_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_BCMATCH_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 7 : Disable interrupt on RSSIEND event. */ +#define RADIO_INTENCLR_RSSIEND_Pos (7UL) /*!< Position of RSSIEND field. */ +#define RADIO_INTENCLR_RSSIEND_Msk (0x1UL << RADIO_INTENCLR_RSSIEND_Pos) /*!< Bit mask of RSSIEND field. */ +#define RADIO_INTENCLR_RSSIEND_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_RSSIEND_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_RSSIEND_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 6 : Disable interrupt on DEVMISS event. */ +#define RADIO_INTENCLR_DEVMISS_Pos (6UL) /*!< Position of DEVMISS field. */ +#define RADIO_INTENCLR_DEVMISS_Msk (0x1UL << RADIO_INTENCLR_DEVMISS_Pos) /*!< Bit mask of DEVMISS field. */ +#define RADIO_INTENCLR_DEVMISS_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_DEVMISS_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_DEVMISS_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 5 : Disable interrupt on DEVMATCH event. */ +#define RADIO_INTENCLR_DEVMATCH_Pos (5UL) /*!< Position of DEVMATCH field. */ +#define RADIO_INTENCLR_DEVMATCH_Msk (0x1UL << RADIO_INTENCLR_DEVMATCH_Pos) /*!< Bit mask of DEVMATCH field. */ +#define RADIO_INTENCLR_DEVMATCH_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_DEVMATCH_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_DEVMATCH_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 4 : Disable interrupt on DISABLED event. */ +#define RADIO_INTENCLR_DISABLED_Pos (4UL) /*!< Position of DISABLED field. */ +#define RADIO_INTENCLR_DISABLED_Msk (0x1UL << RADIO_INTENCLR_DISABLED_Pos) /*!< Bit mask of DISABLED field. */ +#define RADIO_INTENCLR_DISABLED_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_DISABLED_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_DISABLED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 3 : Disable interrupt on END event. */ +#define RADIO_INTENCLR_END_Pos (3UL) /*!< Position of END field. */ +#define RADIO_INTENCLR_END_Msk (0x1UL << RADIO_INTENCLR_END_Pos) /*!< Bit mask of END field. */ +#define RADIO_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 2 : Disable interrupt on PAYLOAD event. */ +#define RADIO_INTENCLR_PAYLOAD_Pos (2UL) /*!< Position of PAYLOAD field. */ +#define RADIO_INTENCLR_PAYLOAD_Msk (0x1UL << RADIO_INTENCLR_PAYLOAD_Pos) /*!< Bit mask of PAYLOAD field. */ +#define RADIO_INTENCLR_PAYLOAD_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_PAYLOAD_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_PAYLOAD_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on ADDRESS event. */ +#define RADIO_INTENCLR_ADDRESS_Pos (1UL) /*!< Position of ADDRESS field. */ +#define RADIO_INTENCLR_ADDRESS_Msk (0x1UL << RADIO_INTENCLR_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */ +#define RADIO_INTENCLR_ADDRESS_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_ADDRESS_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_ADDRESS_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on READY event. */ +#define RADIO_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */ +#define RADIO_INTENCLR_READY_Msk (0x1UL << RADIO_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */ +#define RADIO_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: RADIO_CRCSTATUS */ +/* Description: CRC status of received packet. */ + +/* Bit 0 : CRC status of received packet. */ +#define RADIO_CRCSTATUS_CRCSTATUS_Pos (0UL) /*!< Position of CRCSTATUS field. */ +#define RADIO_CRCSTATUS_CRCSTATUS_Msk (0x1UL << RADIO_CRCSTATUS_CRCSTATUS_Pos) /*!< Bit mask of CRCSTATUS field. */ +#define RADIO_CRCSTATUS_CRCSTATUS_CRCError (0UL) /*!< Packet received with CRC error. */ +#define RADIO_CRCSTATUS_CRCSTATUS_CRCOk (1UL) /*!< Packet received with CRC ok. */ + +/* Register: RADIO_CD */ +/* Description: Carrier detect. */ + +/* Bit 0 : Carrier detect. */ +#define RADIO_CD_CD_Pos (0UL) /*!< Position of CD field. */ +#define RADIO_CD_CD_Msk (0x1UL << RADIO_CD_CD_Pos) /*!< Bit mask of CD field. */ + +/* Register: RADIO_RXMATCH */ +/* Description: Received address. */ + +/* Bits 2..0 : Logical address in which previous packet was received. */ +#define RADIO_RXMATCH_RXMATCH_Pos (0UL) /*!< Position of RXMATCH field. */ +#define RADIO_RXMATCH_RXMATCH_Msk (0x7UL << RADIO_RXMATCH_RXMATCH_Pos) /*!< Bit mask of RXMATCH field. */ + +/* Register: RADIO_RXCRC */ +/* Description: Received CRC. */ + +/* Bits 23..0 : CRC field of previously received packet. */ +#define RADIO_RXCRC_RXCRC_Pos (0UL) /*!< Position of RXCRC field. */ +#define RADIO_RXCRC_RXCRC_Msk (0xFFFFFFUL << RADIO_RXCRC_RXCRC_Pos) /*!< Bit mask of RXCRC field. */ + +/* Register: RADIO_DAI */ +/* Description: Device address match index. */ + +/* Bits 2..0 : Index (n) of device address (see DAB[n] and DAP[n]) that obtained an address match. */ +#define RADIO_DAI_DAI_Pos (0UL) /*!< Position of DAI field. */ +#define RADIO_DAI_DAI_Msk (0x7UL << RADIO_DAI_DAI_Pos) /*!< Bit mask of DAI field. */ + +/* Register: RADIO_FREQUENCY */ +/* Description: Frequency. */ + +/* Bits 6..0 : Radio channel frequency offset in MHz: RF Frequency = 2400 + FREQUENCY (MHz). Decision point: TXEN or RXEN task. */ +#define RADIO_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ +#define RADIO_FREQUENCY_FREQUENCY_Msk (0x7FUL << RADIO_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ + +/* Register: RADIO_TXPOWER */ +/* Description: Output power. */ + +/* Bits 7..0 : Radio output power. Decision point: TXEN task. */ +#define RADIO_TXPOWER_TXPOWER_Pos (0UL) /*!< Position of TXPOWER field. */ +#define RADIO_TXPOWER_TXPOWER_Msk (0xFFUL << RADIO_TXPOWER_TXPOWER_Pos) /*!< Bit mask of TXPOWER field. */ +#define RADIO_TXPOWER_TXPOWER_Pos4dBm (0x04UL) /*!< +4dBm. */ +#define RADIO_TXPOWER_TXPOWER_0dBm (0x00UL) /*!< 0dBm. */ +#define RADIO_TXPOWER_TXPOWER_Neg4dBm (0xFCUL) /*!< -4dBm. */ +#define RADIO_TXPOWER_TXPOWER_Neg8dBm (0xF8UL) /*!< -8dBm. */ +#define RADIO_TXPOWER_TXPOWER_Neg12dBm (0xF4UL) /*!< -12dBm. */ +#define RADIO_TXPOWER_TXPOWER_Neg16dBm (0xF0UL) /*!< -16dBm. */ +#define RADIO_TXPOWER_TXPOWER_Neg20dBm (0xECUL) /*!< -20dBm. */ +#define RADIO_TXPOWER_TXPOWER_Neg30dBm (0xD8UL) /*!< -30dBm. */ + +/* Register: RADIO_MODE */ +/* Description: Data rate and modulation. */ + +/* Bits 1..0 : Radio data rate and modulation setting. Decision point: TXEN or RXEN task. */ +#define RADIO_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */ +#define RADIO_MODE_MODE_Msk (0x3UL << RADIO_MODE_MODE_Pos) /*!< Bit mask of MODE field. */ +#define RADIO_MODE_MODE_Nrf_1Mbit (0x00UL) /*!< 1Mbit/s Nordic propietary radio mode. */ +#define RADIO_MODE_MODE_Nrf_2Mbit (0x01UL) /*!< 2Mbit/s Nordic propietary radio mode. */ +#define RADIO_MODE_MODE_Nrf_250Kbit (0x02UL) /*!< 250kbit/s Nordic propietary radio mode. */ +#define RADIO_MODE_MODE_Ble_1Mbit (0x03UL) /*!< 1Mbit/s Bluetooth Low Energy */ + +/* Register: RADIO_PCNF0 */ +/* Description: Packet configuration 0. */ + +/* Bits 19..16 : Length of S1 field in number of bits. Decision point: START task. */ +#define RADIO_PCNF0_S1LEN_Pos (16UL) /*!< Position of S1LEN field. */ +#define RADIO_PCNF0_S1LEN_Msk (0xFUL << RADIO_PCNF0_S1LEN_Pos) /*!< Bit mask of S1LEN field. */ + +/* Bit 8 : Length of S0 field in number of bytes. Decision point: START task. */ +#define RADIO_PCNF0_S0LEN_Pos (8UL) /*!< Position of S0LEN field. */ +#define RADIO_PCNF0_S0LEN_Msk (0x1UL << RADIO_PCNF0_S0LEN_Pos) /*!< Bit mask of S0LEN field. */ + +/* Bits 3..0 : Length of length field in number of bits. Decision point: START task. */ +#define RADIO_PCNF0_LFLEN_Pos (0UL) /*!< Position of LFLEN field. */ +#define RADIO_PCNF0_LFLEN_Msk (0xFUL << RADIO_PCNF0_LFLEN_Pos) /*!< Bit mask of LFLEN field. */ + +/* Register: RADIO_PCNF1 */ +/* Description: Packet configuration 1. */ + +/* Bit 25 : Packet whitening enable. */ +#define RADIO_PCNF1_WHITEEN_Pos (25UL) /*!< Position of WHITEEN field. */ +#define RADIO_PCNF1_WHITEEN_Msk (0x1UL << RADIO_PCNF1_WHITEEN_Pos) /*!< Bit mask of WHITEEN field. */ +#define RADIO_PCNF1_WHITEEN_Disabled (0UL) /*!< Whitening disabled. */ +#define RADIO_PCNF1_WHITEEN_Enabled (1UL) /*!< Whitening enabled. */ + +/* Bit 24 : On air endianness of packet length field. Decision point: START task. */ +#define RADIO_PCNF1_ENDIAN_Pos (24UL) /*!< Position of ENDIAN field. */ +#define RADIO_PCNF1_ENDIAN_Msk (0x1UL << RADIO_PCNF1_ENDIAN_Pos) /*!< Bit mask of ENDIAN field. */ +#define RADIO_PCNF1_ENDIAN_Little (0UL) /*!< Least significant bit on air first */ +#define RADIO_PCNF1_ENDIAN_Big (1UL) /*!< Most significant bit on air first */ + +/* Bits 18..16 : Base address length in number of bytes. Decision point: START task. */ +#define RADIO_PCNF1_BALEN_Pos (16UL) /*!< Position of BALEN field. */ +#define RADIO_PCNF1_BALEN_Msk (0x7UL << RADIO_PCNF1_BALEN_Pos) /*!< Bit mask of BALEN field. */ + +/* Bits 15..8 : Static length in number of bytes. Decision point: START task. */ +#define RADIO_PCNF1_STATLEN_Pos (8UL) /*!< Position of STATLEN field. */ +#define RADIO_PCNF1_STATLEN_Msk (0xFFUL << RADIO_PCNF1_STATLEN_Pos) /*!< Bit mask of STATLEN field. */ + +/* Bits 7..0 : Maximum length of packet payload in number of bytes. */ +#define RADIO_PCNF1_MAXLEN_Pos (0UL) /*!< Position of MAXLEN field. */ +#define RADIO_PCNF1_MAXLEN_Msk (0xFFUL << RADIO_PCNF1_MAXLEN_Pos) /*!< Bit mask of MAXLEN field. */ + +/* Register: RADIO_PREFIX0 */ +/* Description: Prefixes bytes for logical addresses 0 to 3. */ + +/* Bits 31..24 : Address prefix 3. Decision point: START task. */ +#define RADIO_PREFIX0_AP3_Pos (24UL) /*!< Position of AP3 field. */ +#define RADIO_PREFIX0_AP3_Msk (0xFFUL << RADIO_PREFIX0_AP3_Pos) /*!< Bit mask of AP3 field. */ + +/* Bits 23..16 : Address prefix 2. Decision point: START task. */ +#define RADIO_PREFIX0_AP2_Pos (16UL) /*!< Position of AP2 field. */ +#define RADIO_PREFIX0_AP2_Msk (0xFFUL << RADIO_PREFIX0_AP2_Pos) /*!< Bit mask of AP2 field. */ + +/* Bits 15..8 : Address prefix 1. Decision point: START task. */ +#define RADIO_PREFIX0_AP1_Pos (8UL) /*!< Position of AP1 field. */ +#define RADIO_PREFIX0_AP1_Msk (0xFFUL << RADIO_PREFIX0_AP1_Pos) /*!< Bit mask of AP1 field. */ + +/* Bits 7..0 : Address prefix 0. Decision point: START task. */ +#define RADIO_PREFIX0_AP0_Pos (0UL) /*!< Position of AP0 field. */ +#define RADIO_PREFIX0_AP0_Msk (0xFFUL << RADIO_PREFIX0_AP0_Pos) /*!< Bit mask of AP0 field. */ + +/* Register: RADIO_PREFIX1 */ +/* Description: Prefixes bytes for logical addresses 4 to 7. */ + +/* Bits 31..24 : Address prefix 7. Decision point: START task. */ +#define RADIO_PREFIX1_AP7_Pos (24UL) /*!< Position of AP7 field. */ +#define RADIO_PREFIX1_AP7_Msk (0xFFUL << RADIO_PREFIX1_AP7_Pos) /*!< Bit mask of AP7 field. */ + +/* Bits 23..16 : Address prefix 6. Decision point: START task. */ +#define RADIO_PREFIX1_AP6_Pos (16UL) /*!< Position of AP6 field. */ +#define RADIO_PREFIX1_AP6_Msk (0xFFUL << RADIO_PREFIX1_AP6_Pos) /*!< Bit mask of AP6 field. */ + +/* Bits 15..8 : Address prefix 5. Decision point: START task. */ +#define RADIO_PREFIX1_AP5_Pos (8UL) /*!< Position of AP5 field. */ +#define RADIO_PREFIX1_AP5_Msk (0xFFUL << RADIO_PREFIX1_AP5_Pos) /*!< Bit mask of AP5 field. */ + +/* Bits 7..0 : Address prefix 4. Decision point: START task. */ +#define RADIO_PREFIX1_AP4_Pos (0UL) /*!< Position of AP4 field. */ +#define RADIO_PREFIX1_AP4_Msk (0xFFUL << RADIO_PREFIX1_AP4_Pos) /*!< Bit mask of AP4 field. */ + +/* Register: RADIO_TXADDRESS */ +/* Description: Transmit address select. */ + +/* Bits 2..0 : Logical address to be used when transmitting a packet. Decision point: START task. */ +#define RADIO_TXADDRESS_TXADDRESS_Pos (0UL) /*!< Position of TXADDRESS field. */ +#define RADIO_TXADDRESS_TXADDRESS_Msk (0x7UL << RADIO_TXADDRESS_TXADDRESS_Pos) /*!< Bit mask of TXADDRESS field. */ + +/* Register: RADIO_RXADDRESSES */ +/* Description: Receive address select. */ + +/* Bit 7 : Enable reception on logical address 7. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR7_Pos (7UL) /*!< Position of ADDR7 field. */ +#define RADIO_RXADDRESSES_ADDR7_Msk (0x1UL << RADIO_RXADDRESSES_ADDR7_Pos) /*!< Bit mask of ADDR7 field. */ +#define RADIO_RXADDRESSES_ADDR7_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR7_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 6 : Enable reception on logical address 6. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR6_Pos (6UL) /*!< Position of ADDR6 field. */ +#define RADIO_RXADDRESSES_ADDR6_Msk (0x1UL << RADIO_RXADDRESSES_ADDR6_Pos) /*!< Bit mask of ADDR6 field. */ +#define RADIO_RXADDRESSES_ADDR6_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR6_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 5 : Enable reception on logical address 5. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR5_Pos (5UL) /*!< Position of ADDR5 field. */ +#define RADIO_RXADDRESSES_ADDR5_Msk (0x1UL << RADIO_RXADDRESSES_ADDR5_Pos) /*!< Bit mask of ADDR5 field. */ +#define RADIO_RXADDRESSES_ADDR5_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR5_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 4 : Enable reception on logical address 4. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR4_Pos (4UL) /*!< Position of ADDR4 field. */ +#define RADIO_RXADDRESSES_ADDR4_Msk (0x1UL << RADIO_RXADDRESSES_ADDR4_Pos) /*!< Bit mask of ADDR4 field. */ +#define RADIO_RXADDRESSES_ADDR4_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR4_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 3 : Enable reception on logical address 3. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR3_Pos (3UL) /*!< Position of ADDR3 field. */ +#define RADIO_RXADDRESSES_ADDR3_Msk (0x1UL << RADIO_RXADDRESSES_ADDR3_Pos) /*!< Bit mask of ADDR3 field. */ +#define RADIO_RXADDRESSES_ADDR3_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR3_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 2 : Enable reception on logical address 2. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR2_Pos (2UL) /*!< Position of ADDR2 field. */ +#define RADIO_RXADDRESSES_ADDR2_Msk (0x1UL << RADIO_RXADDRESSES_ADDR2_Pos) /*!< Bit mask of ADDR2 field. */ +#define RADIO_RXADDRESSES_ADDR2_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR2_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 1 : Enable reception on logical address 1. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR1_Pos (1UL) /*!< Position of ADDR1 field. */ +#define RADIO_RXADDRESSES_ADDR1_Msk (0x1UL << RADIO_RXADDRESSES_ADDR1_Pos) /*!< Bit mask of ADDR1 field. */ +#define RADIO_RXADDRESSES_ADDR1_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR1_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 0 : Enable reception on logical address 0. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR0_Pos (0UL) /*!< Position of ADDR0 field. */ +#define RADIO_RXADDRESSES_ADDR0_Msk (0x1UL << RADIO_RXADDRESSES_ADDR0_Pos) /*!< Bit mask of ADDR0 field. */ +#define RADIO_RXADDRESSES_ADDR0_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR0_Enabled (1UL) /*!< Reception enabled. */ + +/* Register: RADIO_CRCCNF */ +/* Description: CRC configuration. */ + +/* Bit 8 : Leave packet address field out of the CRC calculation. Decision point: START task. */ +#define RADIO_CRCCNF_SKIPADDR_Pos (8UL) /*!< Position of SKIPADDR field. */ +#define RADIO_CRCCNF_SKIPADDR_Msk (0x1UL << RADIO_CRCCNF_SKIPADDR_Pos) /*!< Bit mask of SKIPADDR field. */ +#define RADIO_CRCCNF_SKIPADDR_Include (0UL) /*!< Include packet address in CRC calculation. */ +#define RADIO_CRCCNF_SKIPADDR_Skip (1UL) /*!< Packet address is skipped in CRC calculation. The CRC calculation will start at the first byte after the address. */ + +/* Bits 1..0 : CRC length. Decision point: START task. */ +#define RADIO_CRCCNF_LEN_Pos (0UL) /*!< Position of LEN field. */ +#define RADIO_CRCCNF_LEN_Msk (0x3UL << RADIO_CRCCNF_LEN_Pos) /*!< Bit mask of LEN field. */ +#define RADIO_CRCCNF_LEN_Disabled (0UL) /*!< CRC calculation disabled. */ +#define RADIO_CRCCNF_LEN_One (1UL) /*!< One byte long CRC. */ +#define RADIO_CRCCNF_LEN_Two (2UL) /*!< Two bytes long CRC. */ +#define RADIO_CRCCNF_LEN_Three (3UL) /*!< Three bytes long CRC. */ + +/* Register: RADIO_CRCPOLY */ +/* Description: CRC polynomial. */ + +/* Bits 23..0 : CRC polynomial. Decision point: START task. */ +#define RADIO_CRCPOLY_CRCPOLY_Pos (0UL) /*!< Position of CRCPOLY field. */ +#define RADIO_CRCPOLY_CRCPOLY_Msk (0xFFFFFFUL << RADIO_CRCPOLY_CRCPOLY_Pos) /*!< Bit mask of CRCPOLY field. */ + +/* Register: RADIO_CRCINIT */ +/* Description: CRC initial value. */ + +/* Bits 23..0 : Initial value for CRC calculation. Decision point: START task. */ +#define RADIO_CRCINIT_CRCINIT_Pos (0UL) /*!< Position of CRCINIT field. */ +#define RADIO_CRCINIT_CRCINIT_Msk (0xFFFFFFUL << RADIO_CRCINIT_CRCINIT_Pos) /*!< Bit mask of CRCINIT field. */ + +/* Register: RADIO_TEST */ +/* Description: Test features enable register. */ + +/* Bit 1 : PLL lock. Decision point: TXEN or RXEN task. */ +#define RADIO_TEST_PLLLOCK_Pos (1UL) /*!< Position of PLLLOCK field. */ +#define RADIO_TEST_PLLLOCK_Msk (0x1UL << RADIO_TEST_PLLLOCK_Pos) /*!< Bit mask of PLLLOCK field. */ +#define RADIO_TEST_PLLLOCK_Disabled (0UL) /*!< PLL lock disabled. */ +#define RADIO_TEST_PLLLOCK_Enabled (1UL) /*!< PLL lock enabled. */ + +/* Bit 0 : Constant carrier. Decision point: TXEN task. */ +#define RADIO_TEST_CONSTCARRIER_Pos (0UL) /*!< Position of CONSTCARRIER field. */ +#define RADIO_TEST_CONSTCARRIER_Msk (0x1UL << RADIO_TEST_CONSTCARRIER_Pos) /*!< Bit mask of CONSTCARRIER field. */ +#define RADIO_TEST_CONSTCARRIER_Disabled (0UL) /*!< Constant carrier disabled. */ +#define RADIO_TEST_CONSTCARRIER_Enabled (1UL) /*!< Constant carrier enabled. */ + +/* Register: RADIO_TIFS */ +/* Description: Inter Frame Spacing in microseconds. */ + +/* Bits 7..0 : Inter frame spacing in microseconds. Decision point: START rask */ +#define RADIO_TIFS_TIFS_Pos (0UL) /*!< Position of TIFS field. */ +#define RADIO_TIFS_TIFS_Msk (0xFFUL << RADIO_TIFS_TIFS_Pos) /*!< Bit mask of TIFS field. */ + +/* Register: RADIO_RSSISAMPLE */ +/* Description: RSSI sample. */ + +/* Bits 6..0 : RSSI sample result. The result is read as a positive value so that ReceivedSignalStrength = -RSSISAMPLE dBm */ +#define RADIO_RSSISAMPLE_RSSISAMPLE_Pos (0UL) /*!< Position of RSSISAMPLE field. */ +#define RADIO_RSSISAMPLE_RSSISAMPLE_Msk (0x7FUL << RADIO_RSSISAMPLE_RSSISAMPLE_Pos) /*!< Bit mask of RSSISAMPLE field. */ + +/* Register: RADIO_STATE */ +/* Description: Current radio state. */ + +/* Bits 3..0 : Current radio state. */ +#define RADIO_STATE_STATE_Pos (0UL) /*!< Position of STATE field. */ +#define RADIO_STATE_STATE_Msk (0xFUL << RADIO_STATE_STATE_Pos) /*!< Bit mask of STATE field. */ +#define RADIO_STATE_STATE_Disabled (0x00UL) /*!< Radio is in the Disabled state. */ +#define RADIO_STATE_STATE_RxRu (0x01UL) /*!< Radio is in the Rx Ramp Up state. */ +#define RADIO_STATE_STATE_RxIdle (0x02UL) /*!< Radio is in the Rx Idle state. */ +#define RADIO_STATE_STATE_Rx (0x03UL) /*!< Radio is in the Rx state. */ +#define RADIO_STATE_STATE_RxDisable (0x04UL) /*!< Radio is in the Rx Disable state. */ +#define RADIO_STATE_STATE_TxRu (0x09UL) /*!< Radio is in the Tx Ramp Up state. */ +#define RADIO_STATE_STATE_TxIdle (0x0AUL) /*!< Radio is in the Tx Idle state. */ +#define RADIO_STATE_STATE_Tx (0x0BUL) /*!< Radio is in the Tx state. */ +#define RADIO_STATE_STATE_TxDisable (0x0CUL) /*!< Radio is in the Tx Disable state. */ + +/* Register: RADIO_DATAWHITEIV */ +/* Description: Data whitening initial value. */ + +/* Bits 6..0 : Data whitening initial value. Bit 0 corresponds to Position 0 of the LSFR, Bit 1 to position 5... Decision point: TXEN or RXEN task. */ +#define RADIO_DATAWHITEIV_DATAWHITEIV_Pos (0UL) /*!< Position of DATAWHITEIV field. */ +#define RADIO_DATAWHITEIV_DATAWHITEIV_Msk (0x7FUL << RADIO_DATAWHITEIV_DATAWHITEIV_Pos) /*!< Bit mask of DATAWHITEIV field. */ + +/* Register: RADIO_DAP */ +/* Description: Device address prefix. */ + +/* Bits 15..0 : Device address prefix. */ +#define RADIO_DAP_DAP_Pos (0UL) /*!< Position of DAP field. */ +#define RADIO_DAP_DAP_Msk (0xFFFFUL << RADIO_DAP_DAP_Pos) /*!< Bit mask of DAP field. */ + +/* Register: RADIO_DACNF */ +/* Description: Device address match configuration. */ + +/* Bit 15 : TxAdd for device address 7. */ +#define RADIO_DACNF_TXADD7_Pos (15UL) /*!< Position of TXADD7 field. */ +#define RADIO_DACNF_TXADD7_Msk (0x1UL << RADIO_DACNF_TXADD7_Pos) /*!< Bit mask of TXADD7 field. */ + +/* Bit 14 : TxAdd for device address 6. */ +#define RADIO_DACNF_TXADD6_Pos (14UL) /*!< Position of TXADD6 field. */ +#define RADIO_DACNF_TXADD6_Msk (0x1UL << RADIO_DACNF_TXADD6_Pos) /*!< Bit mask of TXADD6 field. */ + +/* Bit 13 : TxAdd for device address 5. */ +#define RADIO_DACNF_TXADD5_Pos (13UL) /*!< Position of TXADD5 field. */ +#define RADIO_DACNF_TXADD5_Msk (0x1UL << RADIO_DACNF_TXADD5_Pos) /*!< Bit mask of TXADD5 field. */ + +/* Bit 12 : TxAdd for device address 4. */ +#define RADIO_DACNF_TXADD4_Pos (12UL) /*!< Position of TXADD4 field. */ +#define RADIO_DACNF_TXADD4_Msk (0x1UL << RADIO_DACNF_TXADD4_Pos) /*!< Bit mask of TXADD4 field. */ + +/* Bit 11 : TxAdd for device address 3. */ +#define RADIO_DACNF_TXADD3_Pos (11UL) /*!< Position of TXADD3 field. */ +#define RADIO_DACNF_TXADD3_Msk (0x1UL << RADIO_DACNF_TXADD3_Pos) /*!< Bit mask of TXADD3 field. */ + +/* Bit 10 : TxAdd for device address 2. */ +#define RADIO_DACNF_TXADD2_Pos (10UL) /*!< Position of TXADD2 field. */ +#define RADIO_DACNF_TXADD2_Msk (0x1UL << RADIO_DACNF_TXADD2_Pos) /*!< Bit mask of TXADD2 field. */ + +/* Bit 9 : TxAdd for device address 1. */ +#define RADIO_DACNF_TXADD1_Pos (9UL) /*!< Position of TXADD1 field. */ +#define RADIO_DACNF_TXADD1_Msk (0x1UL << RADIO_DACNF_TXADD1_Pos) /*!< Bit mask of TXADD1 field. */ + +/* Bit 8 : TxAdd for device address 0. */ +#define RADIO_DACNF_TXADD0_Pos (8UL) /*!< Position of TXADD0 field. */ +#define RADIO_DACNF_TXADD0_Msk (0x1UL << RADIO_DACNF_TXADD0_Pos) /*!< Bit mask of TXADD0 field. */ + +/* Bit 7 : Enable or disable device address matching using device address 7. */ +#define RADIO_DACNF_ENA7_Pos (7UL) /*!< Position of ENA7 field. */ +#define RADIO_DACNF_ENA7_Msk (0x1UL << RADIO_DACNF_ENA7_Pos) /*!< Bit mask of ENA7 field. */ +#define RADIO_DACNF_ENA7_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA7_Enabled (1UL) /*!< Enabled. */ + +/* Bit 6 : Enable or disable device address matching using device address 6. */ +#define RADIO_DACNF_ENA6_Pos (6UL) /*!< Position of ENA6 field. */ +#define RADIO_DACNF_ENA6_Msk (0x1UL << RADIO_DACNF_ENA6_Pos) /*!< Bit mask of ENA6 field. */ +#define RADIO_DACNF_ENA6_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA6_Enabled (1UL) /*!< Enabled. */ + +/* Bit 5 : Enable or disable device address matching using device address 5. */ +#define RADIO_DACNF_ENA5_Pos (5UL) /*!< Position of ENA5 field. */ +#define RADIO_DACNF_ENA5_Msk (0x1UL << RADIO_DACNF_ENA5_Pos) /*!< Bit mask of ENA5 field. */ +#define RADIO_DACNF_ENA5_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA5_Enabled (1UL) /*!< Enabled. */ + +/* Bit 4 : Enable or disable device address matching using device address 4. */ +#define RADIO_DACNF_ENA4_Pos (4UL) /*!< Position of ENA4 field. */ +#define RADIO_DACNF_ENA4_Msk (0x1UL << RADIO_DACNF_ENA4_Pos) /*!< Bit mask of ENA4 field. */ +#define RADIO_DACNF_ENA4_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA4_Enabled (1UL) /*!< Enabled. */ + +/* Bit 3 : Enable or disable device address matching using device address 3. */ +#define RADIO_DACNF_ENA3_Pos (3UL) /*!< Position of ENA3 field. */ +#define RADIO_DACNF_ENA3_Msk (0x1UL << RADIO_DACNF_ENA3_Pos) /*!< Bit mask of ENA3 field. */ +#define RADIO_DACNF_ENA3_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA3_Enabled (1UL) /*!< Enabled. */ + +/* Bit 2 : Enable or disable device address matching using device address 2. */ +#define RADIO_DACNF_ENA2_Pos (2UL) /*!< Position of ENA2 field. */ +#define RADIO_DACNF_ENA2_Msk (0x1UL << RADIO_DACNF_ENA2_Pos) /*!< Bit mask of ENA2 field. */ +#define RADIO_DACNF_ENA2_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA2_Enabled (1UL) /*!< Enabled. */ + +/* Bit 1 : Enable or disable device address matching using device address 1. */ +#define RADIO_DACNF_ENA1_Pos (1UL) /*!< Position of ENA1 field. */ +#define RADIO_DACNF_ENA1_Msk (0x1UL << RADIO_DACNF_ENA1_Pos) /*!< Bit mask of ENA1 field. */ +#define RADIO_DACNF_ENA1_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA1_Enabled (1UL) /*!< Enabled. */ + +/* Bit 0 : Enable or disable device address matching using device address 0. */ +#define RADIO_DACNF_ENA0_Pos (0UL) /*!< Position of ENA0 field. */ +#define RADIO_DACNF_ENA0_Msk (0x1UL << RADIO_DACNF_ENA0_Pos) /*!< Bit mask of ENA0 field. */ +#define RADIO_DACNF_ENA0_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA0_Enabled (1UL) /*!< Enabled. */ + +/* Register: RADIO_OVERRIDE0 */ +/* Description: Trim value override register 0. */ + +/* Bits 31..0 : Trim value override 0. */ +#define RADIO_OVERRIDE0_OVERRIDE0_Pos (0UL) /*!< Position of OVERRIDE0 field. */ +#define RADIO_OVERRIDE0_OVERRIDE0_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE0_OVERRIDE0_Pos) /*!< Bit mask of OVERRIDE0 field. */ + +/* Register: RADIO_OVERRIDE1 */ +/* Description: Trim value override register 1. */ + +/* Bits 31..0 : Trim value override 1. */ +#define RADIO_OVERRIDE1_OVERRIDE1_Pos (0UL) /*!< Position of OVERRIDE1 field. */ +#define RADIO_OVERRIDE1_OVERRIDE1_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE1_OVERRIDE1_Pos) /*!< Bit mask of OVERRIDE1 field. */ + +/* Register: RADIO_OVERRIDE2 */ +/* Description: Trim value override register 2. */ + +/* Bits 31..0 : Trim value override 2. */ +#define RADIO_OVERRIDE2_OVERRIDE2_Pos (0UL) /*!< Position of OVERRIDE2 field. */ +#define RADIO_OVERRIDE2_OVERRIDE2_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE2_OVERRIDE2_Pos) /*!< Bit mask of OVERRIDE2 field. */ + +/* Register: RADIO_OVERRIDE3 */ +/* Description: Trim value override register 3. */ + +/* Bits 31..0 : Trim value override 3. */ +#define RADIO_OVERRIDE3_OVERRIDE3_Pos (0UL) /*!< Position of OVERRIDE3 field. */ +#define RADIO_OVERRIDE3_OVERRIDE3_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE3_OVERRIDE3_Pos) /*!< Bit mask of OVERRIDE3 field. */ + +/* Register: RADIO_OVERRIDE4 */ +/* Description: Trim value override register 4. */ + +/* Bit 31 : Enable or disable override of default trim values. */ +#define RADIO_OVERRIDE4_ENABLE_Pos (31UL) /*!< Position of ENABLE field. */ +#define RADIO_OVERRIDE4_ENABLE_Msk (0x1UL << RADIO_OVERRIDE4_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define RADIO_OVERRIDE4_ENABLE_Disabled (0UL) /*!< Override trim values disabled. */ +#define RADIO_OVERRIDE4_ENABLE_Enabled (1UL) /*!< Override trim values enabled. */ + +/* Bits 27..0 : Trim value override 4. */ +#define RADIO_OVERRIDE4_OVERRIDE4_Pos (0UL) /*!< Position of OVERRIDE4 field. */ +#define RADIO_OVERRIDE4_OVERRIDE4_Msk (0xFFFFFFFUL << RADIO_OVERRIDE4_OVERRIDE4_Pos) /*!< Bit mask of OVERRIDE4 field. */ + +/* Register: RADIO_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define RADIO_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define RADIO_POWER_POWER_Msk (0x1UL << RADIO_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define RADIO_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define RADIO_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: RNG */ +/* Description: Random Number Generator. */ + +/* Register: RNG_SHORTS */ +/* Description: Shortcuts for the RNG. */ + +/* Bit 0 : Shortcut between VALRDY event and STOP task. */ +#define RNG_SHORTS_VALRDY_STOP_Pos (0UL) /*!< Position of VALRDY_STOP field. */ +#define RNG_SHORTS_VALRDY_STOP_Msk (0x1UL << RNG_SHORTS_VALRDY_STOP_Pos) /*!< Bit mask of VALRDY_STOP field. */ +#define RNG_SHORTS_VALRDY_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define RNG_SHORTS_VALRDY_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: RNG_INTENSET */ +/* Description: Interrupt enable set register */ + +/* Bit 0 : Enable interrupt on VALRDY event. */ +#define RNG_INTENSET_VALRDY_Pos (0UL) /*!< Position of VALRDY field. */ +#define RNG_INTENSET_VALRDY_Msk (0x1UL << RNG_INTENSET_VALRDY_Pos) /*!< Bit mask of VALRDY field. */ +#define RNG_INTENSET_VALRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define RNG_INTENSET_VALRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define RNG_INTENSET_VALRDY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: RNG_INTENCLR */ +/* Description: Interrupt enable clear register */ + +/* Bit 0 : Disable interrupt on VALRDY event. */ +#define RNG_INTENCLR_VALRDY_Pos (0UL) /*!< Position of VALRDY field. */ +#define RNG_INTENCLR_VALRDY_Msk (0x1UL << RNG_INTENCLR_VALRDY_Pos) /*!< Bit mask of VALRDY field. */ +#define RNG_INTENCLR_VALRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define RNG_INTENCLR_VALRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define RNG_INTENCLR_VALRDY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: RNG_CONFIG */ +/* Description: Configuration register. */ + +/* Bit 0 : Digital error correction enable. */ +#define RNG_CONFIG_DERCEN_Pos (0UL) /*!< Position of DERCEN field. */ +#define RNG_CONFIG_DERCEN_Msk (0x1UL << RNG_CONFIG_DERCEN_Pos) /*!< Bit mask of DERCEN field. */ +#define RNG_CONFIG_DERCEN_Disabled (0UL) /*!< Digital error correction disabled. */ +#define RNG_CONFIG_DERCEN_Enabled (1UL) /*!< Digital error correction enabled. */ + +/* Register: RNG_VALUE */ +/* Description: RNG random number. */ + +/* Bits 7..0 : Generated random number. */ +#define RNG_VALUE_VALUE_Pos (0UL) /*!< Position of VALUE field. */ +#define RNG_VALUE_VALUE_Msk (0xFFUL << RNG_VALUE_VALUE_Pos) /*!< Bit mask of VALUE field. */ + +/* Register: RNG_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define RNG_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define RNG_POWER_POWER_Msk (0x1UL << RNG_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define RNG_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define RNG_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: RTC */ +/* Description: Real time counter 0. */ + +/* Register: RTC_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 19 : Enable interrupt on COMPARE[3] event. */ +#define RTC_INTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define RTC_INTENSET_COMPARE3_Msk (0x1UL << RTC_INTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define RTC_INTENSET_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENSET_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENSET_COMPARE3_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 18 : Enable interrupt on COMPARE[2] event. */ +#define RTC_INTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define RTC_INTENSET_COMPARE2_Msk (0x1UL << RTC_INTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define RTC_INTENSET_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENSET_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENSET_COMPARE2_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 17 : Enable interrupt on COMPARE[1] event. */ +#define RTC_INTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define RTC_INTENSET_COMPARE1_Msk (0x1UL << RTC_INTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define RTC_INTENSET_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENSET_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENSET_COMPARE1_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 16 : Enable interrupt on COMPARE[0] event. */ +#define RTC_INTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define RTC_INTENSET_COMPARE0_Msk (0x1UL << RTC_INTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define RTC_INTENSET_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENSET_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENSET_COMPARE0_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on OVRFLW event. */ +#define RTC_INTENSET_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ +#define RTC_INTENSET_OVRFLW_Msk (0x1UL << RTC_INTENSET_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ +#define RTC_INTENSET_OVRFLW_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENSET_OVRFLW_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENSET_OVRFLW_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on TICK event. */ +#define RTC_INTENSET_TICK_Pos (0UL) /*!< Position of TICK field. */ +#define RTC_INTENSET_TICK_Msk (0x1UL << RTC_INTENSET_TICK_Pos) /*!< Bit mask of TICK field. */ +#define RTC_INTENSET_TICK_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENSET_TICK_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENSET_TICK_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: RTC_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 19 : Disable interrupt on COMPARE[3] event. */ +#define RTC_INTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define RTC_INTENCLR_COMPARE3_Msk (0x1UL << RTC_INTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define RTC_INTENCLR_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENCLR_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENCLR_COMPARE3_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 18 : Disable interrupt on COMPARE[2] event. */ +#define RTC_INTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define RTC_INTENCLR_COMPARE2_Msk (0x1UL << RTC_INTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define RTC_INTENCLR_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENCLR_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENCLR_COMPARE2_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 17 : Disable interrupt on COMPARE[1] event. */ +#define RTC_INTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define RTC_INTENCLR_COMPARE1_Msk (0x1UL << RTC_INTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define RTC_INTENCLR_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENCLR_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENCLR_COMPARE1_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 16 : Disable interrupt on COMPARE[0] event. */ +#define RTC_INTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define RTC_INTENCLR_COMPARE0_Msk (0x1UL << RTC_INTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define RTC_INTENCLR_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENCLR_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENCLR_COMPARE0_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on OVRFLW event. */ +#define RTC_INTENCLR_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ +#define RTC_INTENCLR_OVRFLW_Msk (0x1UL << RTC_INTENCLR_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ +#define RTC_INTENCLR_OVRFLW_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENCLR_OVRFLW_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENCLR_OVRFLW_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on TICK event. */ +#define RTC_INTENCLR_TICK_Pos (0UL) /*!< Position of TICK field. */ +#define RTC_INTENCLR_TICK_Msk (0x1UL << RTC_INTENCLR_TICK_Pos) /*!< Bit mask of TICK field. */ +#define RTC_INTENCLR_TICK_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENCLR_TICK_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENCLR_TICK_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: RTC_EVTEN */ +/* Description: Configures event enable routing to PPI for each RTC event. */ + +/* Bit 19 : COMPARE[3] event enable. */ +#define RTC_EVTEN_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define RTC_EVTEN_COMPARE3_Msk (0x1UL << RTC_EVTEN_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define RTC_EVTEN_COMPARE3_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTEN_COMPARE3_Enabled (1UL) /*!< Event enabled. */ + +/* Bit 18 : COMPARE[2] event enable. */ +#define RTC_EVTEN_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define RTC_EVTEN_COMPARE2_Msk (0x1UL << RTC_EVTEN_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define RTC_EVTEN_COMPARE2_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTEN_COMPARE2_Enabled (1UL) /*!< Event enabled. */ + +/* Bit 17 : COMPARE[1] event enable. */ +#define RTC_EVTEN_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define RTC_EVTEN_COMPARE1_Msk (0x1UL << RTC_EVTEN_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define RTC_EVTEN_COMPARE1_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTEN_COMPARE1_Enabled (1UL) /*!< Event enabled. */ + +/* Bit 16 : COMPARE[0] event enable. */ +#define RTC_EVTEN_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define RTC_EVTEN_COMPARE0_Msk (0x1UL << RTC_EVTEN_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define RTC_EVTEN_COMPARE0_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTEN_COMPARE0_Enabled (1UL) /*!< Event enabled. */ + +/* Bit 1 : OVRFLW event enable. */ +#define RTC_EVTEN_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ +#define RTC_EVTEN_OVRFLW_Msk (0x1UL << RTC_EVTEN_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ +#define RTC_EVTEN_OVRFLW_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTEN_OVRFLW_Enabled (1UL) /*!< Event enabled. */ + +/* Bit 0 : TICK event enable. */ +#define RTC_EVTEN_TICK_Pos (0UL) /*!< Position of TICK field. */ +#define RTC_EVTEN_TICK_Msk (0x1UL << RTC_EVTEN_TICK_Pos) /*!< Bit mask of TICK field. */ +#define RTC_EVTEN_TICK_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTEN_TICK_Enabled (1UL) /*!< Event enabled. */ + +/* Register: RTC_EVTENSET */ +/* Description: Enable events routing to PPI. The reading of this register gives the value of EVTEN. */ + +/* Bit 19 : Enable routing to PPI of COMPARE[3] event. */ +#define RTC_EVTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define RTC_EVTENSET_COMPARE3_Msk (0x1UL << RTC_EVTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define RTC_EVTENSET_COMPARE3_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENSET_COMPARE3_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENSET_COMPARE3_Set (1UL) /*!< Enable event on write. */ + +/* Bit 18 : Enable routing to PPI of COMPARE[2] event. */ +#define RTC_EVTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define RTC_EVTENSET_COMPARE2_Msk (0x1UL << RTC_EVTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define RTC_EVTENSET_COMPARE2_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENSET_COMPARE2_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENSET_COMPARE2_Set (1UL) /*!< Enable event on write. */ + +/* Bit 17 : Enable routing to PPI of COMPARE[1] event. */ +#define RTC_EVTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define RTC_EVTENSET_COMPARE1_Msk (0x1UL << RTC_EVTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define RTC_EVTENSET_COMPARE1_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENSET_COMPARE1_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENSET_COMPARE1_Set (1UL) /*!< Enable event on write. */ + +/* Bit 16 : Enable routing to PPI of COMPARE[0] event. */ +#define RTC_EVTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define RTC_EVTENSET_COMPARE0_Msk (0x1UL << RTC_EVTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define RTC_EVTENSET_COMPARE0_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENSET_COMPARE0_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENSET_COMPARE0_Set (1UL) /*!< Enable event on write. */ + +/* Bit 1 : Enable routing to PPI of OVRFLW event. */ +#define RTC_EVTENSET_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ +#define RTC_EVTENSET_OVRFLW_Msk (0x1UL << RTC_EVTENSET_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ +#define RTC_EVTENSET_OVRFLW_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENSET_OVRFLW_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENSET_OVRFLW_Set (1UL) /*!< Enable event on write. */ + +/* Bit 0 : Enable routing to PPI of TICK event. */ +#define RTC_EVTENSET_TICK_Pos (0UL) /*!< Position of TICK field. */ +#define RTC_EVTENSET_TICK_Msk (0x1UL << RTC_EVTENSET_TICK_Pos) /*!< Bit mask of TICK field. */ +#define RTC_EVTENSET_TICK_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENSET_TICK_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENSET_TICK_Set (1UL) /*!< Enable event on write. */ + +/* Register: RTC_EVTENCLR */ +/* Description: Disable events routing to PPI. The reading of this register gives the value of EVTEN. */ + +/* Bit 19 : Disable routing to PPI of COMPARE[3] event. */ +#define RTC_EVTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define RTC_EVTENCLR_COMPARE3_Msk (0x1UL << RTC_EVTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define RTC_EVTENCLR_COMPARE3_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENCLR_COMPARE3_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENCLR_COMPARE3_Clear (1UL) /*!< Disable event on write. */ + +/* Bit 18 : Disable routing to PPI of COMPARE[2] event. */ +#define RTC_EVTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define RTC_EVTENCLR_COMPARE2_Msk (0x1UL << RTC_EVTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define RTC_EVTENCLR_COMPARE2_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENCLR_COMPARE2_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENCLR_COMPARE2_Clear (1UL) /*!< Disable event on write. */ + +/* Bit 17 : Disable routing to PPI of COMPARE[1] event. */ +#define RTC_EVTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define RTC_EVTENCLR_COMPARE1_Msk (0x1UL << RTC_EVTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define RTC_EVTENCLR_COMPARE1_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENCLR_COMPARE1_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENCLR_COMPARE1_Clear (1UL) /*!< Disable event on write. */ + +/* Bit 16 : Disable routing to PPI of COMPARE[0] event. */ +#define RTC_EVTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define RTC_EVTENCLR_COMPARE0_Msk (0x1UL << RTC_EVTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define RTC_EVTENCLR_COMPARE0_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENCLR_COMPARE0_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENCLR_COMPARE0_Clear (1UL) /*!< Disable event on write. */ + +/* Bit 1 : Disable routing to PPI of OVRFLW event. */ +#define RTC_EVTENCLR_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ +#define RTC_EVTENCLR_OVRFLW_Msk (0x1UL << RTC_EVTENCLR_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ +#define RTC_EVTENCLR_OVRFLW_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENCLR_OVRFLW_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENCLR_OVRFLW_Clear (1UL) /*!< Disable event on write. */ + +/* Bit 0 : Disable routing to PPI of TICK event. */ +#define RTC_EVTENCLR_TICK_Pos (0UL) /*!< Position of TICK field. */ +#define RTC_EVTENCLR_TICK_Msk (0x1UL << RTC_EVTENCLR_TICK_Pos) /*!< Bit mask of TICK field. */ +#define RTC_EVTENCLR_TICK_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENCLR_TICK_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENCLR_TICK_Clear (1UL) /*!< Disable event on write. */ + +/* Register: RTC_COUNTER */ +/* Description: Current COUNTER value. */ + +/* Bits 23..0 : Counter value. */ +#define RTC_COUNTER_COUNTER_Pos (0UL) /*!< Position of COUNTER field. */ +#define RTC_COUNTER_COUNTER_Msk (0xFFFFFFUL << RTC_COUNTER_COUNTER_Pos) /*!< Bit mask of COUNTER field. */ + +/* Register: RTC_PRESCALER */ +/* Description: 12-bit prescaler for COUNTER frequency (32768/(PRESCALER+1)). Must be written when RTC is STOPed. */ + +/* Bits 11..0 : RTC PRESCALER value. */ +#define RTC_PRESCALER_PRESCALER_Pos (0UL) /*!< Position of PRESCALER field. */ +#define RTC_PRESCALER_PRESCALER_Msk (0xFFFUL << RTC_PRESCALER_PRESCALER_Pos) /*!< Bit mask of PRESCALER field. */ + +/* Register: RTC_CC */ +/* Description: Capture/compare registers. */ + +/* Bits 23..0 : Compare value. */ +#define RTC_CC_COMPARE_Pos (0UL) /*!< Position of COMPARE field. */ +#define RTC_CC_COMPARE_Msk (0xFFFFFFUL << RTC_CC_COMPARE_Pos) /*!< Bit mask of COMPARE field. */ + +/* Register: RTC_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define RTC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define RTC_POWER_POWER_Msk (0x1UL << RTC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define RTC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define RTC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: SPI */ +/* Description: SPI master 0. */ + +/* Register: SPI_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 2 : Enable interrupt on READY event. */ +#define SPI_INTENSET_READY_Pos (2UL) /*!< Position of READY field. */ +#define SPI_INTENSET_READY_Msk (0x1UL << SPI_INTENSET_READY_Pos) /*!< Bit mask of READY field. */ +#define SPI_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPI_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPI_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: SPI_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 2 : Disable interrupt on READY event. */ +#define SPI_INTENCLR_READY_Pos (2UL) /*!< Position of READY field. */ +#define SPI_INTENCLR_READY_Msk (0x1UL << SPI_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */ +#define SPI_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPI_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPI_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: SPI_ENABLE */ +/* Description: Enable SPI. */ + +/* Bits 2..0 : Enable or disable SPI. */ +#define SPI_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define SPI_ENABLE_ENABLE_Msk (0x7UL << SPI_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define SPI_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPI. */ +#define SPI_ENABLE_ENABLE_Enabled (0x01UL) /*!< Enable SPI. */ + +/* Register: SPI_RXD */ +/* Description: RX data. */ + +/* Bits 7..0 : RX data from last transfer. */ +#define SPI_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */ +#define SPI_RXD_RXD_Msk (0xFFUL << SPI_RXD_RXD_Pos) /*!< Bit mask of RXD field. */ + +/* Register: SPI_TXD */ +/* Description: TX data. */ + +/* Bits 7..0 : TX data for next transfer. */ +#define SPI_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */ +#define SPI_TXD_TXD_Msk (0xFFUL << SPI_TXD_TXD_Pos) /*!< Bit mask of TXD field. */ + +/* Register: SPI_FREQUENCY */ +/* Description: SPI frequency */ + +/* Bits 31..0 : SPI data rate. */ +#define SPI_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ +#define SPI_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << SPI_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ +#define SPI_FREQUENCY_FREQUENCY_K125 (0x02000000UL) /*!< 125kbps. */ +#define SPI_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250kbps. */ +#define SPI_FREQUENCY_FREQUENCY_K500 (0x08000000UL) /*!< 500kbps. */ +#define SPI_FREQUENCY_FREQUENCY_M1 (0x10000000UL) /*!< 1Mbps. */ +#define SPI_FREQUENCY_FREQUENCY_M2 (0x20000000UL) /*!< 2Mbps. */ +#define SPI_FREQUENCY_FREQUENCY_M4 (0x40000000UL) /*!< 4Mbps. */ +#define SPI_FREQUENCY_FREQUENCY_M8 (0x80000000UL) /*!< 8Mbps. */ + +/* Register: SPI_CONFIG */ +/* Description: Configuration register. */ + +/* Bit 2 : Serial clock (SCK) polarity. */ +#define SPI_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */ +#define SPI_CONFIG_CPOL_Msk (0x1UL << SPI_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */ +#define SPI_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */ +#define SPI_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */ + +/* Bit 1 : Serial clock (SCK) phase. */ +#define SPI_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */ +#define SPI_CONFIG_CPHA_Msk (0x1UL << SPI_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */ +#define SPI_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */ +#define SPI_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */ + +/* Bit 0 : Bit order. */ +#define SPI_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */ +#define SPI_CONFIG_ORDER_Msk (0x1UL << SPI_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */ +#define SPI_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */ +#define SPI_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */ + +/* Register: SPI_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define SPI_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define SPI_POWER_POWER_Msk (0x1UL << SPI_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define SPI_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define SPI_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: SPIM */ +/* Description: SPI master with easyDMA 1. */ + +/* Register: SPIM_SHORTS */ +/* Description: Shortcuts for SPIM. */ + +/* Bit 17 : Shortcut between END event and START task. */ +#define SPIM_SHORTS_END_START_Pos (17UL) /*!< Position of END_START field. */ +#define SPIM_SHORTS_END_START_Msk (0x1UL << SPIM_SHORTS_END_START_Pos) /*!< Bit mask of END_START field. */ +#define SPIM_SHORTS_END_START_Disabled (0UL) /*!< Shortcut disabled. */ +#define SPIM_SHORTS_END_START_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: SPIM_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 19 : Enable interrupt on STARTED event. */ +#define SPIM_INTENSET_STARTED_Pos (19UL) /*!< Position of STARTED field. */ +#define SPIM_INTENSET_STARTED_Msk (0x1UL << SPIM_INTENSET_STARTED_Pos) /*!< Bit mask of STARTED field. */ +#define SPIM_INTENSET_STARTED_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPIM_INTENSET_STARTED_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPIM_INTENSET_STARTED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 8 : Enable interrupt on ENDTX event. */ +#define SPIM_INTENSET_ENDTX_Pos (8UL) /*!< Position of ENDTX field. */ +#define SPIM_INTENSET_ENDTX_Msk (0x1UL << SPIM_INTENSET_ENDTX_Pos) /*!< Bit mask of ENDTX field. */ +#define SPIM_INTENSET_ENDTX_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPIM_INTENSET_ENDTX_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPIM_INTENSET_ENDTX_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 6 : Enable interrupt on END event. */ +#define SPIM_INTENSET_END_Pos (6UL) /*!< Position of END field. */ +#define SPIM_INTENSET_END_Msk (0x1UL << SPIM_INTENSET_END_Pos) /*!< Bit mask of END field. */ +#define SPIM_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPIM_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPIM_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 4 : Enable interrupt on ENDRX event. */ +#define SPIM_INTENSET_ENDRX_Pos (4UL) /*!< Position of ENDRX field. */ +#define SPIM_INTENSET_ENDRX_Msk (0x1UL << SPIM_INTENSET_ENDRX_Pos) /*!< Bit mask of ENDRX field. */ +#define SPIM_INTENSET_ENDRX_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPIM_INTENSET_ENDRX_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPIM_INTENSET_ENDRX_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on STOPPED event. */ +#define SPIM_INTENSET_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */ +#define SPIM_INTENSET_STOPPED_Msk (0x1UL << SPIM_INTENSET_STOPPED_Pos) /*!< Bit mask of STOPPED field. */ +#define SPIM_INTENSET_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPIM_INTENSET_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPIM_INTENSET_STOPPED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: SPIM_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 19 : Disable interrupt on STARTED event. */ +#define SPIM_INTENCLR_STARTED_Pos (19UL) /*!< Position of STARTED field. */ +#define SPIM_INTENCLR_STARTED_Msk (0x1UL << SPIM_INTENCLR_STARTED_Pos) /*!< Bit mask of STARTED field. */ +#define SPIM_INTENCLR_STARTED_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPIM_INTENCLR_STARTED_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPIM_INTENCLR_STARTED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 8 : Disable interrupt on ENDTX event. */ +#define SPIM_INTENCLR_ENDTX_Pos (8UL) /*!< Position of ENDTX field. */ +#define SPIM_INTENCLR_ENDTX_Msk (0x1UL << SPIM_INTENCLR_ENDTX_Pos) /*!< Bit mask of ENDTX field. */ +#define SPIM_INTENCLR_ENDTX_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPIM_INTENCLR_ENDTX_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPIM_INTENCLR_ENDTX_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 6 : Disable interrupt on END event. */ +#define SPIM_INTENCLR_END_Pos (6UL) /*!< Position of END field. */ +#define SPIM_INTENCLR_END_Msk (0x1UL << SPIM_INTENCLR_END_Pos) /*!< Bit mask of END field. */ +#define SPIM_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPIM_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPIM_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 4 : Disable interrupt on ENDRX event. */ +#define SPIM_INTENCLR_ENDRX_Pos (4UL) /*!< Position of ENDRX field. */ +#define SPIM_INTENCLR_ENDRX_Msk (0x1UL << SPIM_INTENCLR_ENDRX_Pos) /*!< Bit mask of ENDRX field. */ +#define SPIM_INTENCLR_ENDRX_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPIM_INTENCLR_ENDRX_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPIM_INTENCLR_ENDRX_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on STOPPED event. */ +#define SPIM_INTENCLR_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */ +#define SPIM_INTENCLR_STOPPED_Msk (0x1UL << SPIM_INTENCLR_STOPPED_Pos) /*!< Bit mask of STOPPED field. */ +#define SPIM_INTENCLR_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPIM_INTENCLR_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPIM_INTENCLR_STOPPED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: SPIM_ENABLE */ +/* Description: Enable SPIM. */ + +/* Bits 3..0 : Enable or disable SPIM. */ +#define SPIM_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define SPIM_ENABLE_ENABLE_Msk (0xFUL << SPIM_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define SPIM_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPIM. */ +#define SPIM_ENABLE_ENABLE_Enabled (0x07UL) /*!< Enable SPIM. */ + +/* Register: SPIM_RXDDATA */ +/* Description: RXD register. */ + +/* Bits 7..0 : RX data received. Double buffered. */ +#define SPIM_RXDDATA_RXD_Pos (0UL) /*!< Position of RXD field. */ +#define SPIM_RXDDATA_RXD_Msk (0xFFUL << SPIM_RXDDATA_RXD_Pos) /*!< Bit mask of RXD field. */ + +/* Register: SPIM_TXDDATA */ +/* Description: TXD register. */ + +/* Bits 7..0 : TX data to send. Double buffered. */ +#define SPIM_TXDDATA_TXD_Pos (0UL) /*!< Position of TXD field. */ +#define SPIM_TXDDATA_TXD_Msk (0xFFUL << SPIM_TXDDATA_TXD_Pos) /*!< Bit mask of TXD field. */ + +/* Register: SPIM_FREQUENCY */ +/* Description: SPI frequency. */ + +/* Bits 31..0 : SPI master data rate. */ +#define SPIM_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ +#define SPIM_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << SPIM_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ +#define SPIM_FREQUENCY_FREQUENCY_K125 (0x02000000UL) /*!< 125 kbps. */ +#define SPIM_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250 kbps. */ +#define SPIM_FREQUENCY_FREQUENCY_K500 (0x08000000UL) /*!< 500 kbps. */ +#define SPIM_FREQUENCY_FREQUENCY_M1 (0x10000000UL) /*!< 1 Mbps. */ +#define SPIM_FREQUENCY_FREQUENCY_M2 (0x20000000UL) /*!< 2 Mbps. */ +#define SPIM_FREQUENCY_FREQUENCY_M4 (0x40000000UL) /*!< 4 Mbps. */ +#define SPIM_FREQUENCY_FREQUENCY_M8 (0x80000000UL) /*!< 8 Mbps. */ + +/* Register: SPIM_CONFIG */ +/* Description: Configuration register. */ + +/* Bit 2 : Serial clock (SCK) polarity. */ +#define SPIM_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */ +#define SPIM_CONFIG_CPOL_Msk (0x1UL << SPIM_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */ +#define SPIM_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */ +#define SPIM_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */ + +/* Bit 1 : Serial clock (SCK) phase. */ +#define SPIM_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */ +#define SPIM_CONFIG_CPHA_Msk (0x1UL << SPIM_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */ +#define SPIM_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */ +#define SPIM_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */ + +/* Bit 0 : Bit order. */ +#define SPIM_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */ +#define SPIM_CONFIG_ORDER_Msk (0x1UL << SPIM_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */ +#define SPIM_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */ +#define SPIM_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */ + +/* Register: SPIM_ORC */ +/* Description: Over-read character. */ + +/* Bits 7..0 : Over-read character. */ +#define SPIM_ORC_ORC_Pos (0UL) /*!< Position of ORC field. */ +#define SPIM_ORC_ORC_Msk (0xFFUL << SPIM_ORC_ORC_Pos) /*!< Bit mask of ORC field. */ + +/* Register: SPIM_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define SPIM_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define SPIM_POWER_POWER_Msk (0x1UL << SPIM_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define SPIM_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define SPIM_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + +/* Register: SPIM_RXD_PTR */ +/* Description: Data pointer. */ + +/* Bits 31..0 : Data pointer. */ +#define SPIM_RXD_PTR_PTR_Pos (0UL) /*!< Position of PTR field. */ +#define SPIM_RXD_PTR_PTR_Msk (0xFFFFFFFFUL << SPIM_RXD_PTR_PTR_Pos) /*!< Bit mask of PTR field. */ + +/* Register: SPIM_RXD_MAXCNT */ +/* Description: Maximum number of buffer bytes to receive. */ + +/* Bits 7..0 : Maximum number of buffer bytes to receive. */ +#define SPIM_RXD_MAXCNT_MAXCNT_Pos (0UL) /*!< Position of MAXCNT field. */ +#define SPIM_RXD_MAXCNT_MAXCNT_Msk (0xFFUL << SPIM_RXD_MAXCNT_MAXCNT_Pos) /*!< Bit mask of MAXCNT field. */ + +/* Register: SPIM_RXD_AMOUNT */ +/* Description: Number of bytes received in the last transaction. */ + +/* Bits 7..0 : Number of bytes received in the last transaction. */ +#define SPIM_RXD_AMOUNT_AMOUNT_Pos (0UL) /*!< Position of AMOUNT field. */ +#define SPIM_RXD_AMOUNT_AMOUNT_Msk (0xFFUL << SPIM_RXD_AMOUNT_AMOUNT_Pos) /*!< Bit mask of AMOUNT field. */ + +/* Register: SPIM_TXD_PTR */ +/* Description: Data pointer. */ + +/* Bits 31..0 : Data pointer. */ +#define SPIM_TXD_PTR_PTR_Pos (0UL) /*!< Position of PTR field. */ +#define SPIM_TXD_PTR_PTR_Msk (0xFFFFFFFFUL << SPIM_TXD_PTR_PTR_Pos) /*!< Bit mask of PTR field. */ + +/* Register: SPIM_TXD_MAXCNT */ +/* Description: Maximum number of buffer bytes to send. */ + +/* Bits 7..0 : Maximum number of buffer bytes to send. */ +#define SPIM_TXD_MAXCNT_MAXCNT_Pos (0UL) /*!< Position of MAXCNT field. */ +#define SPIM_TXD_MAXCNT_MAXCNT_Msk (0xFFUL << SPIM_TXD_MAXCNT_MAXCNT_Pos) /*!< Bit mask of MAXCNT field. */ + +/* Register: SPIM_TXD_AMOUNT */ +/* Description: Number of bytes sent in the last transaction. */ + +/* Bits 7..0 : Number of bytes sent in the last transaction. */ +#define SPIM_TXD_AMOUNT_AMOUNT_Pos (0UL) /*!< Position of AMOUNT field. */ +#define SPIM_TXD_AMOUNT_AMOUNT_Msk (0xFFUL << SPIM_TXD_AMOUNT_AMOUNT_Pos) /*!< Bit mask of AMOUNT field. */ + + +/* Peripheral: SPIS */ +/* Description: SPI slave 1. */ + +/* Register: SPIS_SHORTS */ +/* Description: Shortcuts for SPIS. */ + +/* Bit 2 : Shortcut between END event and the ACQUIRE task. */ +#define SPIS_SHORTS_END_ACQUIRE_Pos (2UL) /*!< Position of END_ACQUIRE field. */ +#define SPIS_SHORTS_END_ACQUIRE_Msk (0x1UL << SPIS_SHORTS_END_ACQUIRE_Pos) /*!< Bit mask of END_ACQUIRE field. */ +#define SPIS_SHORTS_END_ACQUIRE_Disabled (0UL) /*!< Shortcut disabled. */ +#define SPIS_SHORTS_END_ACQUIRE_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: SPIS_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 10 : Enable interrupt on ACQUIRED event. */ +#define SPIS_INTENSET_ACQUIRED_Pos (10UL) /*!< Position of ACQUIRED field. */ +#define SPIS_INTENSET_ACQUIRED_Msk (0x1UL << SPIS_INTENSET_ACQUIRED_Pos) /*!< Bit mask of ACQUIRED field. */ +#define SPIS_INTENSET_ACQUIRED_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPIS_INTENSET_ACQUIRED_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPIS_INTENSET_ACQUIRED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on END event. */ +#define SPIS_INTENSET_END_Pos (1UL) /*!< Position of END field. */ +#define SPIS_INTENSET_END_Msk (0x1UL << SPIS_INTENSET_END_Pos) /*!< Bit mask of END field. */ +#define SPIS_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPIS_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPIS_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: SPIS_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 10 : Disable interrupt on ACQUIRED event. */ +#define SPIS_INTENCLR_ACQUIRED_Pos (10UL) /*!< Position of ACQUIRED field. */ +#define SPIS_INTENCLR_ACQUIRED_Msk (0x1UL << SPIS_INTENCLR_ACQUIRED_Pos) /*!< Bit mask of ACQUIRED field. */ +#define SPIS_INTENCLR_ACQUIRED_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPIS_INTENCLR_ACQUIRED_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPIS_INTENCLR_ACQUIRED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on END event. */ +#define SPIS_INTENCLR_END_Pos (1UL) /*!< Position of END field. */ +#define SPIS_INTENCLR_END_Msk (0x1UL << SPIS_INTENCLR_END_Pos) /*!< Bit mask of END field. */ +#define SPIS_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPIS_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPIS_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: SPIS_SEMSTAT */ +/* Description: Semaphore status. */ + +/* Bits 1..0 : Semaphore status. */ +#define SPIS_SEMSTAT_SEMSTAT_Pos (0UL) /*!< Position of SEMSTAT field. */ +#define SPIS_SEMSTAT_SEMSTAT_Msk (0x3UL << SPIS_SEMSTAT_SEMSTAT_Pos) /*!< Bit mask of SEMSTAT field. */ +#define SPIS_SEMSTAT_SEMSTAT_Free (0x00UL) /*!< Semaphore is free. */ +#define SPIS_SEMSTAT_SEMSTAT_CPU (0x01UL) /*!< Semaphore is assigned to the CPU. */ +#define SPIS_SEMSTAT_SEMSTAT_SPIS (0x02UL) /*!< Semaphore is assigned to the SPIS. */ +#define SPIS_SEMSTAT_SEMSTAT_CPUPending (0x03UL) /*!< Semaphore is assigned to the SPIS, but a handover to the CPU is pending. */ + +/* Register: SPIS_STATUS */ +/* Description: Status from last transaction. */ + +/* Bit 1 : RX buffer overflow detected, and prevented. */ +#define SPIS_STATUS_OVERFLOW_Pos (1UL) /*!< Position of OVERFLOW field. */ +#define SPIS_STATUS_OVERFLOW_Msk (0x1UL << SPIS_STATUS_OVERFLOW_Pos) /*!< Bit mask of OVERFLOW field. */ +#define SPIS_STATUS_OVERFLOW_NotPresent (0UL) /*!< Error not present. */ +#define SPIS_STATUS_OVERFLOW_Present (1UL) /*!< Error present. */ +#define SPIS_STATUS_OVERFLOW_Clear (1UL) /*!< Clear on write. */ + +/* Bit 0 : TX buffer overread detected, and prevented. */ +#define SPIS_STATUS_OVERREAD_Pos (0UL) /*!< Position of OVERREAD field. */ +#define SPIS_STATUS_OVERREAD_Msk (0x1UL << SPIS_STATUS_OVERREAD_Pos) /*!< Bit mask of OVERREAD field. */ +#define SPIS_STATUS_OVERREAD_NotPresent (0UL) /*!< Error not present. */ +#define SPIS_STATUS_OVERREAD_Present (1UL) /*!< Error present. */ +#define SPIS_STATUS_OVERREAD_Clear (1UL) /*!< Clear on write. */ + +/* Register: SPIS_ENABLE */ +/* Description: Enable SPIS. */ + +/* Bits 2..0 : Enable or disable SPIS. */ +#define SPIS_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define SPIS_ENABLE_ENABLE_Msk (0x7UL << SPIS_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define SPIS_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPIS. */ +#define SPIS_ENABLE_ENABLE_Enabled (0x02UL) /*!< Enable SPIS. */ + +/* Register: SPIS_MAXRX */ +/* Description: Maximum number of bytes in the receive buffer. */ + +/* Bits 7..0 : Maximum number of bytes in the receive buffer. */ +#define SPIS_MAXRX_MAXRX_Pos (0UL) /*!< Position of MAXRX field. */ +#define SPIS_MAXRX_MAXRX_Msk (0xFFUL << SPIS_MAXRX_MAXRX_Pos) /*!< Bit mask of MAXRX field. */ + +/* Register: SPIS_AMOUNTRX */ +/* Description: Number of bytes received in last granted transaction. */ + +/* Bits 7..0 : Number of bytes received in last granted transaction. */ +#define SPIS_AMOUNTRX_AMOUNTRX_Pos (0UL) /*!< Position of AMOUNTRX field. */ +#define SPIS_AMOUNTRX_AMOUNTRX_Msk (0xFFUL << SPIS_AMOUNTRX_AMOUNTRX_Pos) /*!< Bit mask of AMOUNTRX field. */ + +/* Register: SPIS_MAXTX */ +/* Description: Maximum number of bytes in the transmit buffer. */ + +/* Bits 7..0 : Maximum number of bytes in the transmit buffer. */ +#define SPIS_MAXTX_MAXTX_Pos (0UL) /*!< Position of MAXTX field. */ +#define SPIS_MAXTX_MAXTX_Msk (0xFFUL << SPIS_MAXTX_MAXTX_Pos) /*!< Bit mask of MAXTX field. */ + +/* Register: SPIS_AMOUNTTX */ +/* Description: Number of bytes transmitted in last granted transaction. */ + +/* Bits 7..0 : Number of bytes transmitted in last granted transaction. */ +#define SPIS_AMOUNTTX_AMOUNTTX_Pos (0UL) /*!< Position of AMOUNTTX field. */ +#define SPIS_AMOUNTTX_AMOUNTTX_Msk (0xFFUL << SPIS_AMOUNTTX_AMOUNTTX_Pos) /*!< Bit mask of AMOUNTTX field. */ + +/* Register: SPIS_CONFIG */ +/* Description: Configuration register. */ + +/* Bit 2 : Serial clock (SCK) polarity. */ +#define SPIS_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */ +#define SPIS_CONFIG_CPOL_Msk (0x1UL << SPIS_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */ +#define SPIS_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */ +#define SPIS_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */ + +/* Bit 1 : Serial clock (SCK) phase. */ +#define SPIS_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */ +#define SPIS_CONFIG_CPHA_Msk (0x1UL << SPIS_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */ +#define SPIS_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */ +#define SPIS_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */ + +/* Bit 0 : Bit order. */ +#define SPIS_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */ +#define SPIS_CONFIG_ORDER_Msk (0x1UL << SPIS_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */ +#define SPIS_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */ +#define SPIS_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */ + +/* Register: SPIS_DEF */ +/* Description: Default character. */ + +/* Bits 7..0 : Default character. */ +#define SPIS_DEF_DEF_Pos (0UL) /*!< Position of DEF field. */ +#define SPIS_DEF_DEF_Msk (0xFFUL << SPIS_DEF_DEF_Pos) /*!< Bit mask of DEF field. */ + +/* Register: SPIS_ORC */ +/* Description: Over-read character. */ + +/* Bits 7..0 : Over-read character. */ +#define SPIS_ORC_ORC_Pos (0UL) /*!< Position of ORC field. */ +#define SPIS_ORC_ORC_Msk (0xFFUL << SPIS_ORC_ORC_Pos) /*!< Bit mask of ORC field. */ + +/* Register: SPIS_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define SPIS_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define SPIS_POWER_POWER_Msk (0x1UL << SPIS_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define SPIS_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define SPIS_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: TEMP */ +/* Description: Temperature Sensor. */ + +/* Register: TEMP_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 0 : Enable interrupt on DATARDY event. */ +#define TEMP_INTENSET_DATARDY_Pos (0UL) /*!< Position of DATARDY field. */ +#define TEMP_INTENSET_DATARDY_Msk (0x1UL << TEMP_INTENSET_DATARDY_Pos) /*!< Bit mask of DATARDY field. */ +#define TEMP_INTENSET_DATARDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define TEMP_INTENSET_DATARDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define TEMP_INTENSET_DATARDY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: TEMP_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 0 : Disable interrupt on DATARDY event. */ +#define TEMP_INTENCLR_DATARDY_Pos (0UL) /*!< Position of DATARDY field. */ +#define TEMP_INTENCLR_DATARDY_Msk (0x1UL << TEMP_INTENCLR_DATARDY_Pos) /*!< Bit mask of DATARDY field. */ +#define TEMP_INTENCLR_DATARDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define TEMP_INTENCLR_DATARDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define TEMP_INTENCLR_DATARDY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: TEMP_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define TEMP_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define TEMP_POWER_POWER_Msk (0x1UL << TEMP_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define TEMP_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define TEMP_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: TIMER */ +/* Description: Timer 0. */ + +/* Register: TIMER_SHORTS */ +/* Description: Shortcuts for Timer. */ + +/* Bit 11 : Shortcut between CC[3] event and the STOP task. */ +#define TIMER_SHORTS_COMPARE3_STOP_Pos (11UL) /*!< Position of COMPARE3_STOP field. */ +#define TIMER_SHORTS_COMPARE3_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE3_STOP_Pos) /*!< Bit mask of COMPARE3_STOP field. */ +#define TIMER_SHORTS_COMPARE3_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE3_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 10 : Shortcut between CC[2] event and the STOP task. */ +#define TIMER_SHORTS_COMPARE2_STOP_Pos (10UL) /*!< Position of COMPARE2_STOP field. */ +#define TIMER_SHORTS_COMPARE2_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE2_STOP_Pos) /*!< Bit mask of COMPARE2_STOP field. */ +#define TIMER_SHORTS_COMPARE2_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE2_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 9 : Shortcut between CC[1] event and the STOP task. */ +#define TIMER_SHORTS_COMPARE1_STOP_Pos (9UL) /*!< Position of COMPARE1_STOP field. */ +#define TIMER_SHORTS_COMPARE1_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE1_STOP_Pos) /*!< Bit mask of COMPARE1_STOP field. */ +#define TIMER_SHORTS_COMPARE1_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE1_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 8 : Shortcut between CC[0] event and the STOP task. */ +#define TIMER_SHORTS_COMPARE0_STOP_Pos (8UL) /*!< Position of COMPARE0_STOP field. */ +#define TIMER_SHORTS_COMPARE0_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE0_STOP_Pos) /*!< Bit mask of COMPARE0_STOP field. */ +#define TIMER_SHORTS_COMPARE0_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE0_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 3 : Shortcut between CC[3] event and the CLEAR task. */ +#define TIMER_SHORTS_COMPARE3_CLEAR_Pos (3UL) /*!< Position of COMPARE3_CLEAR field. */ +#define TIMER_SHORTS_COMPARE3_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE3_CLEAR_Pos) /*!< Bit mask of COMPARE3_CLEAR field. */ +#define TIMER_SHORTS_COMPARE3_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE3_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 2 : Shortcut between CC[2] event and the CLEAR task. */ +#define TIMER_SHORTS_COMPARE2_CLEAR_Pos (2UL) /*!< Position of COMPARE2_CLEAR field. */ +#define TIMER_SHORTS_COMPARE2_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE2_CLEAR_Pos) /*!< Bit mask of COMPARE2_CLEAR field. */ +#define TIMER_SHORTS_COMPARE2_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE2_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 1 : Shortcut between CC[1] event and the CLEAR task. */ +#define TIMER_SHORTS_COMPARE1_CLEAR_Pos (1UL) /*!< Position of COMPARE1_CLEAR field. */ +#define TIMER_SHORTS_COMPARE1_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE1_CLEAR_Pos) /*!< Bit mask of COMPARE1_CLEAR field. */ +#define TIMER_SHORTS_COMPARE1_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE1_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 0 : Shortcut between CC[0] event and the CLEAR task. */ +#define TIMER_SHORTS_COMPARE0_CLEAR_Pos (0UL) /*!< Position of COMPARE0_CLEAR field. */ +#define TIMER_SHORTS_COMPARE0_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE0_CLEAR_Pos) /*!< Bit mask of COMPARE0_CLEAR field. */ +#define TIMER_SHORTS_COMPARE0_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE0_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: TIMER_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 19 : Enable interrupt on COMPARE[3] */ +#define TIMER_INTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define TIMER_INTENSET_COMPARE3_Msk (0x1UL << TIMER_INTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define TIMER_INTENSET_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENSET_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENSET_COMPARE3_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 18 : Enable interrupt on COMPARE[2] */ +#define TIMER_INTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define TIMER_INTENSET_COMPARE2_Msk (0x1UL << TIMER_INTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define TIMER_INTENSET_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENSET_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENSET_COMPARE2_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 17 : Enable interrupt on COMPARE[1] */ +#define TIMER_INTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define TIMER_INTENSET_COMPARE1_Msk (0x1UL << TIMER_INTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define TIMER_INTENSET_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENSET_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENSET_COMPARE1_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 16 : Enable interrupt on COMPARE[0] */ +#define TIMER_INTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define TIMER_INTENSET_COMPARE0_Msk (0x1UL << TIMER_INTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define TIMER_INTENSET_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENSET_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENSET_COMPARE0_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: TIMER_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 19 : Disable interrupt on COMPARE[3] */ +#define TIMER_INTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define TIMER_INTENCLR_COMPARE3_Msk (0x1UL << TIMER_INTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define TIMER_INTENCLR_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENCLR_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENCLR_COMPARE3_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 18 : Disable interrupt on COMPARE[2] */ +#define TIMER_INTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define TIMER_INTENCLR_COMPARE2_Msk (0x1UL << TIMER_INTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define TIMER_INTENCLR_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENCLR_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENCLR_COMPARE2_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 17 : Disable interrupt on COMPARE[1] */ +#define TIMER_INTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define TIMER_INTENCLR_COMPARE1_Msk (0x1UL << TIMER_INTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define TIMER_INTENCLR_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENCLR_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENCLR_COMPARE1_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 16 : Disable interrupt on COMPARE[0] */ +#define TIMER_INTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define TIMER_INTENCLR_COMPARE0_Msk (0x1UL << TIMER_INTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define TIMER_INTENCLR_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENCLR_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENCLR_COMPARE0_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: TIMER_MODE */ +/* Description: Timer Mode selection. */ + +/* Bit 0 : Select Normal or Counter mode. */ +#define TIMER_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */ +#define TIMER_MODE_MODE_Msk (0x1UL << TIMER_MODE_MODE_Pos) /*!< Bit mask of MODE field. */ +#define TIMER_MODE_MODE_Timer (0UL) /*!< Timer in Normal mode. */ +#define TIMER_MODE_MODE_Counter (1UL) /*!< Timer in Counter mode. */ + +/* Register: TIMER_BITMODE */ +/* Description: Sets timer behaviour. */ + +/* Bits 1..0 : Sets timer behaviour ro be like the implementation of a timer with width as indicated. */ +#define TIMER_BITMODE_BITMODE_Pos (0UL) /*!< Position of BITMODE field. */ +#define TIMER_BITMODE_BITMODE_Msk (0x3UL << TIMER_BITMODE_BITMODE_Pos) /*!< Bit mask of BITMODE field. */ +#define TIMER_BITMODE_BITMODE_16Bit (0x00UL) /*!< 16-bit timer behaviour. */ +#define TIMER_BITMODE_BITMODE_08Bit (0x01UL) /*!< 8-bit timer behaviour. */ +#define TIMER_BITMODE_BITMODE_24Bit (0x02UL) /*!< 24-bit timer behaviour. */ +#define TIMER_BITMODE_BITMODE_32Bit (0x03UL) /*!< 32-bit timer behaviour. */ + +/* Register: TIMER_PRESCALER */ +/* Description: 4-bit prescaler to source clock frequency (max value 9). Source clock frequency is divided by 2^SCALE. */ + +/* Bits 3..0 : Timer PRESCALER value. Max value is 9. */ +#define TIMER_PRESCALER_PRESCALER_Pos (0UL) /*!< Position of PRESCALER field. */ +#define TIMER_PRESCALER_PRESCALER_Msk (0xFUL << TIMER_PRESCALER_PRESCALER_Pos) /*!< Bit mask of PRESCALER field. */ + +/* Register: TIMER_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define TIMER_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define TIMER_POWER_POWER_Msk (0x1UL << TIMER_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define TIMER_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define TIMER_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: TWI */ +/* Description: Two-wire interface master 0. */ + +/* Register: TWI_SHORTS */ +/* Description: Shortcuts for TWI. */ + +/* Bit 1 : Shortcut between BB event and the STOP task. */ +#define TWI_SHORTS_BB_STOP_Pos (1UL) /*!< Position of BB_STOP field. */ +#define TWI_SHORTS_BB_STOP_Msk (0x1UL << TWI_SHORTS_BB_STOP_Pos) /*!< Bit mask of BB_STOP field. */ +#define TWI_SHORTS_BB_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define TWI_SHORTS_BB_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 0 : Shortcut between BB event and the SUSPEND task. */ +#define TWI_SHORTS_BB_SUSPEND_Pos (0UL) /*!< Position of BB_SUSPEND field. */ +#define TWI_SHORTS_BB_SUSPEND_Msk (0x1UL << TWI_SHORTS_BB_SUSPEND_Pos) /*!< Bit mask of BB_SUSPEND field. */ +#define TWI_SHORTS_BB_SUSPEND_Disabled (0UL) /*!< Shortcut disabled. */ +#define TWI_SHORTS_BB_SUSPEND_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: TWI_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 18 : Enable interrupt on SUSPENDED event. */ +#define TWI_INTENSET_SUSPENDED_Pos (18UL) /*!< Position of SUSPENDED field. */ +#define TWI_INTENSET_SUSPENDED_Msk (0x1UL << TWI_INTENSET_SUSPENDED_Pos) /*!< Bit mask of SUSPENDED field. */ +#define TWI_INTENSET_SUSPENDED_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENSET_SUSPENDED_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENSET_SUSPENDED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 14 : Enable interrupt on BB event. */ +#define TWI_INTENSET_BB_Pos (14UL) /*!< Position of BB field. */ +#define TWI_INTENSET_BB_Msk (0x1UL << TWI_INTENSET_BB_Pos) /*!< Bit mask of BB field. */ +#define TWI_INTENSET_BB_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENSET_BB_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENSET_BB_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 9 : Enable interrupt on ERROR event. */ +#define TWI_INTENSET_ERROR_Pos (9UL) /*!< Position of ERROR field. */ +#define TWI_INTENSET_ERROR_Msk (0x1UL << TWI_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */ +#define TWI_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 7 : Enable interrupt on TXDSENT event. */ +#define TWI_INTENSET_TXDSENT_Pos (7UL) /*!< Position of TXDSENT field. */ +#define TWI_INTENSET_TXDSENT_Msk (0x1UL << TWI_INTENSET_TXDSENT_Pos) /*!< Bit mask of TXDSENT field. */ +#define TWI_INTENSET_TXDSENT_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENSET_TXDSENT_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENSET_TXDSENT_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 2 : Enable interrupt on READY event. */ +#define TWI_INTENSET_RXDREADY_Pos (2UL) /*!< Position of RXDREADY field. */ +#define TWI_INTENSET_RXDREADY_Msk (0x1UL << TWI_INTENSET_RXDREADY_Pos) /*!< Bit mask of RXDREADY field. */ +#define TWI_INTENSET_RXDREADY_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENSET_RXDREADY_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENSET_RXDREADY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on STOPPED event. */ +#define TWI_INTENSET_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */ +#define TWI_INTENSET_STOPPED_Msk (0x1UL << TWI_INTENSET_STOPPED_Pos) /*!< Bit mask of STOPPED field. */ +#define TWI_INTENSET_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENSET_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENSET_STOPPED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: TWI_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 18 : Disable interrupt on SUSPENDED event. */ +#define TWI_INTENCLR_SUSPENDED_Pos (18UL) /*!< Position of SUSPENDED field. */ +#define TWI_INTENCLR_SUSPENDED_Msk (0x1UL << TWI_INTENCLR_SUSPENDED_Pos) /*!< Bit mask of SUSPENDED field. */ +#define TWI_INTENCLR_SUSPENDED_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENCLR_SUSPENDED_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENCLR_SUSPENDED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 14 : Disable interrupt on BB event. */ +#define TWI_INTENCLR_BB_Pos (14UL) /*!< Position of BB field. */ +#define TWI_INTENCLR_BB_Msk (0x1UL << TWI_INTENCLR_BB_Pos) /*!< Bit mask of BB field. */ +#define TWI_INTENCLR_BB_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENCLR_BB_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENCLR_BB_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 9 : Disable interrupt on ERROR event. */ +#define TWI_INTENCLR_ERROR_Pos (9UL) /*!< Position of ERROR field. */ +#define TWI_INTENCLR_ERROR_Msk (0x1UL << TWI_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */ +#define TWI_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 7 : Disable interrupt on TXDSENT event. */ +#define TWI_INTENCLR_TXDSENT_Pos (7UL) /*!< Position of TXDSENT field. */ +#define TWI_INTENCLR_TXDSENT_Msk (0x1UL << TWI_INTENCLR_TXDSENT_Pos) /*!< Bit mask of TXDSENT field. */ +#define TWI_INTENCLR_TXDSENT_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENCLR_TXDSENT_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENCLR_TXDSENT_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 2 : Disable interrupt on RXDREADY event. */ +#define TWI_INTENCLR_RXDREADY_Pos (2UL) /*!< Position of RXDREADY field. */ +#define TWI_INTENCLR_RXDREADY_Msk (0x1UL << TWI_INTENCLR_RXDREADY_Pos) /*!< Bit mask of RXDREADY field. */ +#define TWI_INTENCLR_RXDREADY_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENCLR_RXDREADY_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENCLR_RXDREADY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on STOPPED event. */ +#define TWI_INTENCLR_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */ +#define TWI_INTENCLR_STOPPED_Msk (0x1UL << TWI_INTENCLR_STOPPED_Pos) /*!< Bit mask of STOPPED field. */ +#define TWI_INTENCLR_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENCLR_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENCLR_STOPPED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: TWI_ERRORSRC */ +/* Description: Two-wire error source. Write error field to 1 to clear error. */ + +/* Bit 2 : NACK received after sending a data byte. */ +#define TWI_ERRORSRC_DNACK_Pos (2UL) /*!< Position of DNACK field. */ +#define TWI_ERRORSRC_DNACK_Msk (0x1UL << TWI_ERRORSRC_DNACK_Pos) /*!< Bit mask of DNACK field. */ +#define TWI_ERRORSRC_DNACK_NotPresent (0UL) /*!< Error not present. */ +#define TWI_ERRORSRC_DNACK_Present (1UL) /*!< Error present. */ +#define TWI_ERRORSRC_DNACK_Clear (1UL) /*!< Clear error on write. */ + +/* Bit 1 : NACK received after sending the address. */ +#define TWI_ERRORSRC_ANACK_Pos (1UL) /*!< Position of ANACK field. */ +#define TWI_ERRORSRC_ANACK_Msk (0x1UL << TWI_ERRORSRC_ANACK_Pos) /*!< Bit mask of ANACK field. */ +#define TWI_ERRORSRC_ANACK_NotPresent (0UL) /*!< Error not present. */ +#define TWI_ERRORSRC_ANACK_Present (1UL) /*!< Error present. */ +#define TWI_ERRORSRC_ANACK_Clear (1UL) /*!< Clear error on write. */ + +/* Register: TWI_ENABLE */ +/* Description: Enable two-wire master. */ + +/* Bits 2..0 : Enable or disable W2M */ +#define TWI_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define TWI_ENABLE_ENABLE_Msk (0x7UL << TWI_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define TWI_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled. */ +#define TWI_ENABLE_ENABLE_Enabled (0x05UL) /*!< Enabled. */ + +/* Register: TWI_RXD */ +/* Description: RX data register. */ + +/* Bits 7..0 : RX data from last transfer. */ +#define TWI_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */ +#define TWI_RXD_RXD_Msk (0xFFUL << TWI_RXD_RXD_Pos) /*!< Bit mask of RXD field. */ + +/* Register: TWI_TXD */ +/* Description: TX data register. */ + +/* Bits 7..0 : TX data for next transfer. */ +#define TWI_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */ +#define TWI_TXD_TXD_Msk (0xFFUL << TWI_TXD_TXD_Pos) /*!< Bit mask of TXD field. */ + +/* Register: TWI_FREQUENCY */ +/* Description: Two-wire frequency. */ + +/* Bits 31..0 : Two-wire master clock frequency. */ +#define TWI_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ +#define TWI_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << TWI_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ +#define TWI_FREQUENCY_FREQUENCY_K100 (0x01980000UL) /*!< 100 kbps. */ +#define TWI_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250 kbps. */ +#define TWI_FREQUENCY_FREQUENCY_K400 (0x06680000UL) /*!< 400 kbps. */ + +/* Register: TWI_ADDRESS */ +/* Description: Address used in the two-wire transfer. */ + +/* Bits 6..0 : Two-wire address. */ +#define TWI_ADDRESS_ADDRESS_Pos (0UL) /*!< Position of ADDRESS field. */ +#define TWI_ADDRESS_ADDRESS_Msk (0x7FUL << TWI_ADDRESS_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */ + +/* Register: TWI_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define TWI_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define TWI_POWER_POWER_Msk (0x1UL << TWI_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define TWI_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define TWI_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: UART */ +/* Description: Universal Asynchronous Receiver/Transmitter. */ + +/* Register: UART_SHORTS */ +/* Description: Shortcuts for UART. */ + +/* Bit 4 : Shortcut between NCTS event and the STOPRX task. */ +#define UART_SHORTS_NCTS_STOPRX_Pos (4UL) /*!< Position of NCTS_STOPRX field. */ +#define UART_SHORTS_NCTS_STOPRX_Msk (0x1UL << UART_SHORTS_NCTS_STOPRX_Pos) /*!< Bit mask of NCTS_STOPRX field. */ +#define UART_SHORTS_NCTS_STOPRX_Disabled (0UL) /*!< Shortcut disabled. */ +#define UART_SHORTS_NCTS_STOPRX_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 3 : Shortcut between CTS event and the STARTRX task. */ +#define UART_SHORTS_CTS_STARTRX_Pos (3UL) /*!< Position of CTS_STARTRX field. */ +#define UART_SHORTS_CTS_STARTRX_Msk (0x1UL << UART_SHORTS_CTS_STARTRX_Pos) /*!< Bit mask of CTS_STARTRX field. */ +#define UART_SHORTS_CTS_STARTRX_Disabled (0UL) /*!< Shortcut disabled. */ +#define UART_SHORTS_CTS_STARTRX_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: UART_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 17 : Enable interrupt on RXTO event. */ +#define UART_INTENSET_RXTO_Pos (17UL) /*!< Position of RXTO field. */ +#define UART_INTENSET_RXTO_Msk (0x1UL << UART_INTENSET_RXTO_Pos) /*!< Bit mask of RXTO field. */ +#define UART_INTENSET_RXTO_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENSET_RXTO_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENSET_RXTO_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 9 : Enable interrupt on ERROR event. */ +#define UART_INTENSET_ERROR_Pos (9UL) /*!< Position of ERROR field. */ +#define UART_INTENSET_ERROR_Msk (0x1UL << UART_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */ +#define UART_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 7 : Enable interrupt on TXRDY event. */ +#define UART_INTENSET_TXDRDY_Pos (7UL) /*!< Position of TXDRDY field. */ +#define UART_INTENSET_TXDRDY_Msk (0x1UL << UART_INTENSET_TXDRDY_Pos) /*!< Bit mask of TXDRDY field. */ +#define UART_INTENSET_TXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENSET_TXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENSET_TXDRDY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 2 : Enable interrupt on RXRDY event. */ +#define UART_INTENSET_RXDRDY_Pos (2UL) /*!< Position of RXDRDY field. */ +#define UART_INTENSET_RXDRDY_Msk (0x1UL << UART_INTENSET_RXDRDY_Pos) /*!< Bit mask of RXDRDY field. */ +#define UART_INTENSET_RXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENSET_RXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENSET_RXDRDY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on NCTS event. */ +#define UART_INTENSET_NCTS_Pos (1UL) /*!< Position of NCTS field. */ +#define UART_INTENSET_NCTS_Msk (0x1UL << UART_INTENSET_NCTS_Pos) /*!< Bit mask of NCTS field. */ +#define UART_INTENSET_NCTS_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENSET_NCTS_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENSET_NCTS_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on CTS event. */ +#define UART_INTENSET_CTS_Pos (0UL) /*!< Position of CTS field. */ +#define UART_INTENSET_CTS_Msk (0x1UL << UART_INTENSET_CTS_Pos) /*!< Bit mask of CTS field. */ +#define UART_INTENSET_CTS_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENSET_CTS_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENSET_CTS_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: UART_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 17 : Disable interrupt on RXTO event. */ +#define UART_INTENCLR_RXTO_Pos (17UL) /*!< Position of RXTO field. */ +#define UART_INTENCLR_RXTO_Msk (0x1UL << UART_INTENCLR_RXTO_Pos) /*!< Bit mask of RXTO field. */ +#define UART_INTENCLR_RXTO_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENCLR_RXTO_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENCLR_RXTO_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 9 : Disable interrupt on ERROR event. */ +#define UART_INTENCLR_ERROR_Pos (9UL) /*!< Position of ERROR field. */ +#define UART_INTENCLR_ERROR_Msk (0x1UL << UART_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */ +#define UART_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 7 : Disable interrupt on TXRDY event. */ +#define UART_INTENCLR_TXDRDY_Pos (7UL) /*!< Position of TXDRDY field. */ +#define UART_INTENCLR_TXDRDY_Msk (0x1UL << UART_INTENCLR_TXDRDY_Pos) /*!< Bit mask of TXDRDY field. */ +#define UART_INTENCLR_TXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENCLR_TXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENCLR_TXDRDY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 2 : Disable interrupt on RXRDY event. */ +#define UART_INTENCLR_RXDRDY_Pos (2UL) /*!< Position of RXDRDY field. */ +#define UART_INTENCLR_RXDRDY_Msk (0x1UL << UART_INTENCLR_RXDRDY_Pos) /*!< Bit mask of RXDRDY field. */ +#define UART_INTENCLR_RXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENCLR_RXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENCLR_RXDRDY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on NCTS event. */ +#define UART_INTENCLR_NCTS_Pos (1UL) /*!< Position of NCTS field. */ +#define UART_INTENCLR_NCTS_Msk (0x1UL << UART_INTENCLR_NCTS_Pos) /*!< Bit mask of NCTS field. */ +#define UART_INTENCLR_NCTS_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENCLR_NCTS_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENCLR_NCTS_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on CTS event. */ +#define UART_INTENCLR_CTS_Pos (0UL) /*!< Position of CTS field. */ +#define UART_INTENCLR_CTS_Msk (0x1UL << UART_INTENCLR_CTS_Pos) /*!< Bit mask of CTS field. */ +#define UART_INTENCLR_CTS_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENCLR_CTS_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENCLR_CTS_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: UART_ERRORSRC */ +/* Description: Error source. Write error field to 1 to clear error. */ + +/* Bit 3 : The serial data input is '0' for longer than the length of a data frame. */ +#define UART_ERRORSRC_BREAK_Pos (3UL) /*!< Position of BREAK field. */ +#define UART_ERRORSRC_BREAK_Msk (0x1UL << UART_ERRORSRC_BREAK_Pos) /*!< Bit mask of BREAK field. */ +#define UART_ERRORSRC_BREAK_NotPresent (0UL) /*!< Error not present. */ +#define UART_ERRORSRC_BREAK_Present (1UL) /*!< Error present. */ +#define UART_ERRORSRC_BREAK_Clear (1UL) /*!< Clear error on write. */ + +/* Bit 2 : A valid stop bit is not detected on the serial data input after all bits in a character have been received. */ +#define UART_ERRORSRC_FRAMING_Pos (2UL) /*!< Position of FRAMING field. */ +#define UART_ERRORSRC_FRAMING_Msk (0x1UL << UART_ERRORSRC_FRAMING_Pos) /*!< Bit mask of FRAMING field. */ +#define UART_ERRORSRC_FRAMING_NotPresent (0UL) /*!< Error not present. */ +#define UART_ERRORSRC_FRAMING_Present (1UL) /*!< Error present. */ +#define UART_ERRORSRC_FRAMING_Clear (1UL) /*!< Clear error on write. */ + +/* Bit 1 : A character with bad parity is received. Only checked if HW parity control is enabled. */ +#define UART_ERRORSRC_PARITY_Pos (1UL) /*!< Position of PARITY field. */ +#define UART_ERRORSRC_PARITY_Msk (0x1UL << UART_ERRORSRC_PARITY_Pos) /*!< Bit mask of PARITY field. */ +#define UART_ERRORSRC_PARITY_NotPresent (0UL) /*!< Error not present. */ +#define UART_ERRORSRC_PARITY_Present (1UL) /*!< Error present. */ +#define UART_ERRORSRC_PARITY_Clear (1UL) /*!< Clear error on write. */ + +/* Bit 0 : A start bit is received while the previous data still lies in RXD. (Data loss). */ +#define UART_ERRORSRC_OVERRUN_Pos (0UL) /*!< Position of OVERRUN field. */ +#define UART_ERRORSRC_OVERRUN_Msk (0x1UL << UART_ERRORSRC_OVERRUN_Pos) /*!< Bit mask of OVERRUN field. */ +#define UART_ERRORSRC_OVERRUN_NotPresent (0UL) /*!< Error not present. */ +#define UART_ERRORSRC_OVERRUN_Present (1UL) /*!< Error present. */ +#define UART_ERRORSRC_OVERRUN_Clear (1UL) /*!< Clear error on write. */ + +/* Register: UART_ENABLE */ +/* Description: Enable UART and acquire IOs. */ + +/* Bits 2..0 : Enable or disable UART and acquire IOs. */ +#define UART_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define UART_ENABLE_ENABLE_Msk (0x7UL << UART_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define UART_ENABLE_ENABLE_Disabled (0x00UL) /*!< UART disabled. */ +#define UART_ENABLE_ENABLE_Enabled (0x04UL) /*!< UART enabled. */ + +/* Register: UART_RXD */ +/* Description: RXD register. On read action the buffer pointer is displaced. Once read the character is consumed. If read when no character available, the UART will stop working. */ + +/* Bits 7..0 : RX data from previous transfer. Double buffered. */ +#define UART_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */ +#define UART_RXD_RXD_Msk (0xFFUL << UART_RXD_RXD_Pos) /*!< Bit mask of RXD field. */ + +/* Register: UART_TXD */ +/* Description: TXD register. */ + +/* Bits 7..0 : TX data for transfer. */ +#define UART_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */ +#define UART_TXD_TXD_Msk (0xFFUL << UART_TXD_TXD_Pos) /*!< Bit mask of TXD field. */ + +/* Register: UART_BAUDRATE */ +/* Description: UART Baudrate. */ + +/* Bits 31..0 : UART baudrate. */ +#define UART_BAUDRATE_BAUDRATE_Pos (0UL) /*!< Position of BAUDRATE field. */ +#define UART_BAUDRATE_BAUDRATE_Msk (0xFFFFFFFFUL << UART_BAUDRATE_BAUDRATE_Pos) /*!< Bit mask of BAUDRATE field. */ +#define UART_BAUDRATE_BAUDRATE_Baud1200 (0x0004F000UL) /*!< 1200 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud2400 (0x0009D000UL) /*!< 2400 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud4800 (0x0013B000UL) /*!< 4800 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud9600 (0x00275000UL) /*!< 9600 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud14400 (0x003B0000UL) /*!< 14400 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud19200 (0x004EA000UL) /*!< 19200 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud28800 (0x0075F000UL) /*!< 28800 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud38400 (0x009D5000UL) /*!< 38400 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud57600 (0x00EBF000UL) /*!< 57600 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud76800 (0x013A9000UL) /*!< 76800 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud115200 (0x01D7E000UL) /*!< 115200 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud230400 (0x03AFB000UL) /*!< 230400 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud250000 (0x04000000UL) /*!< 250000 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud460800 (0x075F7000UL) /*!< 460800 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud921600 (0x0EBEDFA4UL) /*!< 921600 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud1M (0x10000000UL) /*!< 1M baud. */ + +/* Register: UART_CONFIG */ +/* Description: Configuration of parity and hardware flow control register. */ + +/* Bits 3..1 : Include parity bit. */ +#define UART_CONFIG_PARITY_Pos (1UL) /*!< Position of PARITY field. */ +#define UART_CONFIG_PARITY_Msk (0x7UL << UART_CONFIG_PARITY_Pos) /*!< Bit mask of PARITY field. */ +#define UART_CONFIG_PARITY_Excluded (0UL) /*!< Parity bit excluded. */ +#define UART_CONFIG_PARITY_Included (7UL) /*!< Parity bit included. */ + +/* Bit 0 : Hardware flow control. */ +#define UART_CONFIG_HWFC_Pos (0UL) /*!< Position of HWFC field. */ +#define UART_CONFIG_HWFC_Msk (0x1UL << UART_CONFIG_HWFC_Pos) /*!< Bit mask of HWFC field. */ +#define UART_CONFIG_HWFC_Disabled (0UL) /*!< Hardware flow control disabled. */ +#define UART_CONFIG_HWFC_Enabled (1UL) /*!< Hardware flow control enabled. */ + +/* Register: UART_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define UART_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define UART_POWER_POWER_Msk (0x1UL << UART_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define UART_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define UART_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: UICR */ +/* Description: User Information Configuration. */ + +/* Register: UICR_RBPCONF */ +/* Description: Readback protection configuration. */ + +/* Bits 15..8 : Readback protect all code in the device. */ +#define UICR_RBPCONF_PALL_Pos (8UL) /*!< Position of PALL field. */ +#define UICR_RBPCONF_PALL_Msk (0xFFUL << UICR_RBPCONF_PALL_Pos) /*!< Bit mask of PALL field. */ +#define UICR_RBPCONF_PALL_Disabled (0xFFUL) /*!< Disabled. */ +#define UICR_RBPCONF_PALL_Enabled (0x00UL) /*!< Enabled. */ + +/* Bits 7..0 : Readback protect region 0. Will be ignored if pre-programmed factory code is present on the chip. */ +#define UICR_RBPCONF_PR0_Pos (0UL) /*!< Position of PR0 field. */ +#define UICR_RBPCONF_PR0_Msk (0xFFUL << UICR_RBPCONF_PR0_Pos) /*!< Bit mask of PR0 field. */ +#define UICR_RBPCONF_PR0_Disabled (0xFFUL) /*!< Disabled. */ +#define UICR_RBPCONF_PR0_Enabled (0x00UL) /*!< Enabled. */ + +/* Register: UICR_XTALFREQ */ +/* Description: Reset value for CLOCK XTALFREQ register. */ + +/* Bits 7..0 : Reset value for CLOCK XTALFREQ register. */ +#define UICR_XTALFREQ_XTALFREQ_Pos (0UL) /*!< Position of XTALFREQ field. */ +#define UICR_XTALFREQ_XTALFREQ_Msk (0xFFUL << UICR_XTALFREQ_XTALFREQ_Pos) /*!< Bit mask of XTALFREQ field. */ +#define UICR_XTALFREQ_XTALFREQ_16MHz (0xFFUL) /*!< 16MHz Xtal is used. */ +#define UICR_XTALFREQ_XTALFREQ_32MHz (0x00UL) /*!< 32MHz Xtal is used. */ + +/* Register: UICR_FWID */ +/* Description: Firmware ID. */ + +/* Bits 15..0 : Identification number for the firmware loaded into the chip. */ +#define UICR_FWID_FWID_Pos (0UL) /*!< Position of FWID field. */ +#define UICR_FWID_FWID_Msk (0xFFFFUL << UICR_FWID_FWID_Pos) /*!< Bit mask of FWID field. */ + + +/* Peripheral: WDT */ +/* Description: Watchdog Timer. */ + +/* Register: WDT_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 0 : Enable interrupt on TIMEOUT event. */ +#define WDT_INTENSET_TIMEOUT_Pos (0UL) /*!< Position of TIMEOUT field. */ +#define WDT_INTENSET_TIMEOUT_Msk (0x1UL << WDT_INTENSET_TIMEOUT_Pos) /*!< Bit mask of TIMEOUT field. */ +#define WDT_INTENSET_TIMEOUT_Disabled (0UL) /*!< Interrupt disabled. */ +#define WDT_INTENSET_TIMEOUT_Enabled (1UL) /*!< Interrupt enabled. */ +#define WDT_INTENSET_TIMEOUT_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: WDT_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 0 : Disable interrupt on TIMEOUT event. */ +#define WDT_INTENCLR_TIMEOUT_Pos (0UL) /*!< Position of TIMEOUT field. */ +#define WDT_INTENCLR_TIMEOUT_Msk (0x1UL << WDT_INTENCLR_TIMEOUT_Pos) /*!< Bit mask of TIMEOUT field. */ +#define WDT_INTENCLR_TIMEOUT_Disabled (0UL) /*!< Interrupt disabled. */ +#define WDT_INTENCLR_TIMEOUT_Enabled (1UL) /*!< Interrupt enabled. */ +#define WDT_INTENCLR_TIMEOUT_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: WDT_RUNSTATUS */ +/* Description: Watchdog running status. */ + +/* Bit 0 : Watchdog running status. */ +#define WDT_RUNSTATUS_RUNSTATUS_Pos (0UL) /*!< Position of RUNSTATUS field. */ +#define WDT_RUNSTATUS_RUNSTATUS_Msk (0x1UL << WDT_RUNSTATUS_RUNSTATUS_Pos) /*!< Bit mask of RUNSTATUS field. */ +#define WDT_RUNSTATUS_RUNSTATUS_NotRunning (0UL) /*!< Watchdog timer is not running. */ +#define WDT_RUNSTATUS_RUNSTATUS_Running (1UL) /*!< Watchdog timer is running. */ + +/* Register: WDT_REQSTATUS */ +/* Description: Request status. */ + +/* Bit 7 : Request status for RR[7]. */ +#define WDT_REQSTATUS_RR7_Pos (7UL) /*!< Position of RR7 field. */ +#define WDT_REQSTATUS_RR7_Msk (0x1UL << WDT_REQSTATUS_RR7_Pos) /*!< Bit mask of RR7 field. */ +#define WDT_REQSTATUS_RR7_DisabledOrRequested (0UL) /*!< RR[7] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR7_EnabledAndUnrequested (1UL) /*!< RR[7] register is enabled and has not jet requested. */ + +/* Bit 6 : Request status for RR[6]. */ +#define WDT_REQSTATUS_RR6_Pos (6UL) /*!< Position of RR6 field. */ +#define WDT_REQSTATUS_RR6_Msk (0x1UL << WDT_REQSTATUS_RR6_Pos) /*!< Bit mask of RR6 field. */ +#define WDT_REQSTATUS_RR6_DisabledOrRequested (0UL) /*!< RR[6] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR6_EnabledAndUnrequested (1UL) /*!< RR[6] register is enabled and has not jet requested. */ + +/* Bit 5 : Request status for RR[5]. */ +#define WDT_REQSTATUS_RR5_Pos (5UL) /*!< Position of RR5 field. */ +#define WDT_REQSTATUS_RR5_Msk (0x1UL << WDT_REQSTATUS_RR5_Pos) /*!< Bit mask of RR5 field. */ +#define WDT_REQSTATUS_RR5_DisabledOrRequested (0UL) /*!< RR[5] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR5_EnabledAndUnrequested (1UL) /*!< RR[5] register is enabled and has not jet requested. */ + +/* Bit 4 : Request status for RR[4]. */ +#define WDT_REQSTATUS_RR4_Pos (4UL) /*!< Position of RR4 field. */ +#define WDT_REQSTATUS_RR4_Msk (0x1UL << WDT_REQSTATUS_RR4_Pos) /*!< Bit mask of RR4 field. */ +#define WDT_REQSTATUS_RR4_DisabledOrRequested (0UL) /*!< RR[4] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR4_EnabledAndUnrequested (1UL) /*!< RR[4] register is enabled and has not jet requested. */ + +/* Bit 3 : Request status for RR[3]. */ +#define WDT_REQSTATUS_RR3_Pos (3UL) /*!< Position of RR3 field. */ +#define WDT_REQSTATUS_RR3_Msk (0x1UL << WDT_REQSTATUS_RR3_Pos) /*!< Bit mask of RR3 field. */ +#define WDT_REQSTATUS_RR3_DisabledOrRequested (0UL) /*!< RR[3] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR3_EnabledAndUnrequested (1UL) /*!< RR[3] register is enabled and has not jet requested. */ + +/* Bit 2 : Request status for RR[2]. */ +#define WDT_REQSTATUS_RR2_Pos (2UL) /*!< Position of RR2 field. */ +#define WDT_REQSTATUS_RR2_Msk (0x1UL << WDT_REQSTATUS_RR2_Pos) /*!< Bit mask of RR2 field. */ +#define WDT_REQSTATUS_RR2_DisabledOrRequested (0UL) /*!< RR[2] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR2_EnabledAndUnrequested (1UL) /*!< RR[2] register is enabled and has not jet requested. */ + +/* Bit 1 : Request status for RR[1]. */ +#define WDT_REQSTATUS_RR1_Pos (1UL) /*!< Position of RR1 field. */ +#define WDT_REQSTATUS_RR1_Msk (0x1UL << WDT_REQSTATUS_RR1_Pos) /*!< Bit mask of RR1 field. */ +#define WDT_REQSTATUS_RR1_DisabledOrRequested (0UL) /*!< RR[1] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR1_EnabledAndUnrequested (1UL) /*!< RR[1] register is enabled and has not jet requested. */ + +/* Bit 0 : Request status for RR[0]. */ +#define WDT_REQSTATUS_RR0_Pos (0UL) /*!< Position of RR0 field. */ +#define WDT_REQSTATUS_RR0_Msk (0x1UL << WDT_REQSTATUS_RR0_Pos) /*!< Bit mask of RR0 field. */ +#define WDT_REQSTATUS_RR0_DisabledOrRequested (0UL) /*!< RR[0] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR0_EnabledAndUnrequested (1UL) /*!< RR[0] register is enabled and has not jet requested. */ + +/* Register: WDT_RREN */ +/* Description: Reload request enable. */ + +/* Bit 7 : Enable or disable RR[7] register. */ +#define WDT_RREN_RR7_Pos (7UL) /*!< Position of RR7 field. */ +#define WDT_RREN_RR7_Msk (0x1UL << WDT_RREN_RR7_Pos) /*!< Bit mask of RR7 field. */ +#define WDT_RREN_RR7_Disabled (0UL) /*!< RR[7] register is disabled. */ +#define WDT_RREN_RR7_Enabled (1UL) /*!< RR[7] register is enabled. */ + +/* Bit 6 : Enable or disable RR[6] register. */ +#define WDT_RREN_RR6_Pos (6UL) /*!< Position of RR6 field. */ +#define WDT_RREN_RR6_Msk (0x1UL << WDT_RREN_RR6_Pos) /*!< Bit mask of RR6 field. */ +#define WDT_RREN_RR6_Disabled (0UL) /*!< RR[6] register is disabled. */ +#define WDT_RREN_RR6_Enabled (1UL) /*!< RR[6] register is enabled. */ + +/* Bit 5 : Enable or disable RR[5] register. */ +#define WDT_RREN_RR5_Pos (5UL) /*!< Position of RR5 field. */ +#define WDT_RREN_RR5_Msk (0x1UL << WDT_RREN_RR5_Pos) /*!< Bit mask of RR5 field. */ +#define WDT_RREN_RR5_Disabled (0UL) /*!< RR[5] register is disabled. */ +#define WDT_RREN_RR5_Enabled (1UL) /*!< RR[5] register is enabled. */ + +/* Bit 4 : Enable or disable RR[4] register. */ +#define WDT_RREN_RR4_Pos (4UL) /*!< Position of RR4 field. */ +#define WDT_RREN_RR4_Msk (0x1UL << WDT_RREN_RR4_Pos) /*!< Bit mask of RR4 field. */ +#define WDT_RREN_RR4_Disabled (0UL) /*!< RR[4] register is disabled. */ +#define WDT_RREN_RR4_Enabled (1UL) /*!< RR[4] register is enabled. */ + +/* Bit 3 : Enable or disable RR[3] register. */ +#define WDT_RREN_RR3_Pos (3UL) /*!< Position of RR3 field. */ +#define WDT_RREN_RR3_Msk (0x1UL << WDT_RREN_RR3_Pos) /*!< Bit mask of RR3 field. */ +#define WDT_RREN_RR3_Disabled (0UL) /*!< RR[3] register is disabled. */ +#define WDT_RREN_RR3_Enabled (1UL) /*!< RR[3] register is enabled. */ + +/* Bit 2 : Enable or disable RR[2] register. */ +#define WDT_RREN_RR2_Pos (2UL) /*!< Position of RR2 field. */ +#define WDT_RREN_RR2_Msk (0x1UL << WDT_RREN_RR2_Pos) /*!< Bit mask of RR2 field. */ +#define WDT_RREN_RR2_Disabled (0UL) /*!< RR[2] register is disabled. */ +#define WDT_RREN_RR2_Enabled (1UL) /*!< RR[2] register is enabled. */ + +/* Bit 1 : Enable or disable RR[1] register. */ +#define WDT_RREN_RR1_Pos (1UL) /*!< Position of RR1 field. */ +#define WDT_RREN_RR1_Msk (0x1UL << WDT_RREN_RR1_Pos) /*!< Bit mask of RR1 field. */ +#define WDT_RREN_RR1_Disabled (0UL) /*!< RR[1] register is disabled. */ +#define WDT_RREN_RR1_Enabled (1UL) /*!< RR[1] register is enabled. */ + +/* Bit 0 : Enable or disable RR[0] register. */ +#define WDT_RREN_RR0_Pos (0UL) /*!< Position of RR0 field. */ +#define WDT_RREN_RR0_Msk (0x1UL << WDT_RREN_RR0_Pos) /*!< Bit mask of RR0 field. */ +#define WDT_RREN_RR0_Disabled (0UL) /*!< RR[0] register is disabled. */ +#define WDT_RREN_RR0_Enabled (1UL) /*!< RR[0] register is enabled. */ + +/* Register: WDT_CONFIG */ +/* Description: Configuration register. */ + +/* Bit 3 : Configure the watchdog to pause or not while the CPU is halted by the debugger. */ +#define WDT_CONFIG_HALT_Pos (3UL) /*!< Position of HALT field. */ +#define WDT_CONFIG_HALT_Msk (0x1UL << WDT_CONFIG_HALT_Pos) /*!< Bit mask of HALT field. */ +#define WDT_CONFIG_HALT_Pause (0UL) /*!< Pause watchdog while the CPU is halted by the debugger. */ +#define WDT_CONFIG_HALT_Run (1UL) /*!< Do not pause watchdog while the CPU is halted by the debugger. */ + +/* Bit 0 : Configure the watchdog to pause or not while the CPU is sleeping. */ +#define WDT_CONFIG_SLEEP_Pos (0UL) /*!< Position of SLEEP field. */ +#define WDT_CONFIG_SLEEP_Msk (0x1UL << WDT_CONFIG_SLEEP_Pos) /*!< Bit mask of SLEEP field. */ +#define WDT_CONFIG_SLEEP_Pause (0UL) /*!< Pause watchdog while the CPU is asleep. */ +#define WDT_CONFIG_SLEEP_Run (1UL) /*!< Do not pause watchdog while the CPU is asleep. */ + +/* Register: WDT_RR */ +/* Description: Reload requests registers. */ + +/* Bits 31..0 : Reload register. */ +#define WDT_RR_RR_Pos (0UL) /*!< Position of RR field. */ +#define WDT_RR_RR_Msk (0xFFFFFFFFUL << WDT_RR_RR_Pos) /*!< Bit mask of RR field. */ +#define WDT_RR_RR_Reload (0x6E524635UL) /*!< Value to request a reload of the watchdog timer. */ + +/* Register: WDT_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define WDT_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define WDT_POWER_POWER_Msk (0x1UL << WDT_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define WDT_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define WDT_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/*lint --flb "Leave library region" */ +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_DELTA_DFCM_NNN40/nrf_delay.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,74 @@
+#ifndef _NRF_DELAY_H
+#define _NRF_DELAY_H
+
+// #include "nrf.h"
+
+/*lint --e{438, 522} "Variable not used" "Function lacks side-effects" */
+#if defined ( __CC_ARM )
+static __ASM void __INLINE nrf_delay_us(uint32_t volatile number_of_us)
+{
+loop
+ SUBS R0, R0, #1
+ NOP
+ NOP
+ NOP
+ NOP
+ NOP
+ NOP
+ NOP
+ NOP
+ NOP
+ NOP
+ NOP
+ NOP
+ BNE loop
+ BX LR
+}
+#elif defined ( __ICCARM__ )
+static void __INLINE nrf_delay_us(uint32_t volatile number_of_us)
+{
+__ASM (
+"loop:\n\t"
+ " SUBS R0, R0, #1\n\t"
+ " NOP\n\t"
+ " NOP\n\t"
+ " NOP\n\t"
+ " NOP\n\t"
+ " NOP\n\t"
+ " NOP\n\t"
+ " NOP\n\t"
+ " NOP\n\t"
+ " NOP\n\t"
+ " NOP\n\t"
+ " NOP\n\t"
+ " NOP\n\t"
+ " BNE loop\n\t");
+}
+#elif defined ( __GNUC__ )
+static void __INLINE nrf_delay_us(uint32_t volatile number_of_us)
+{
+ do
+ {
+ __ASM volatile (
+ "NOP\n\t"
+ "NOP\n\t"
+ "NOP\n\t"
+ "NOP\n\t"
+ "NOP\n\t"
+ "NOP\n\t"
+ "NOP\n\t"
+ "NOP\n\t"
+ "NOP\n\t"
+ "NOP\n\t"
+ "NOP\n\t"
+ "NOP\n\t"
+ "NOP\n\t"
+ "NOP\n\t"
+ );
+ } while (--number_of_us);
+}
+#endif
+
+void nrf_delay_ms(uint32_t volatile number_of_ms);
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_DELTA_DFCM_NNN40/system_nrf51.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,68 @@
+/* Copyright (c) 2013, Nordic Semiconductor ASA
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * * Neither the name of Nordic Semiconductor ASA nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#ifndef SYSTEM_NRF51_H
+#define SYSTEM_NRF51_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+/**
+ * Initialize the system
+ *
+ * @param none
+ * @return none
+ *
+ * @brief Setup the microcontroller system.
+ * Initialize the System and update the SystemCoreClock variable.
+ */
+extern void SystemInit (void);
+
+/**
+ * Update SystemCoreClock variable
+ *
+ * @param none
+ * @return none
+ *
+ * @brief Updates the SystemCoreClock with current core Clock
+ * retrieved from cpu registers.
+ */
+extern void SystemCoreClockUpdate (void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* SYSTEM_NRF51_H */
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_adc.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_adc_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_can.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_cec.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_comp.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_cortex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_crc.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_crc_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_dac.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_dac_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_dma.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_flash.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_flash_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_gpio.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_hrtim.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2c.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2c_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2s.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2s_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_irda.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_iwdg.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_nand.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_nor.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_opamp.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_opamp_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pccard.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pcd.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pcd_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pwr.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pwr_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rcc.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rcc_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rtc.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rtc_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_sdadc.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_smartcard.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_smartcard_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_smbus.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_spi.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_sram.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_tim.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_tim_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_tsc.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_uart.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_uart_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_usart.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_wwdg.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/stm32f3xx_ll_fmc.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_MICRO/system_stm32f3xx.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_adc.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_adc_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_can.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_cec.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_comp.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_cortex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_crc.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_crc_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_dac.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_dac_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_dma.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_flash.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_flash_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_gpio.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_hrtim.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2c.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2c_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2s.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2s_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_irda.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_iwdg.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_nand.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_nor.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_opamp.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_opamp_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pccard.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pcd.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pcd_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pwr.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pwr_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rcc.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rcc_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rtc.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rtc_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_sdadc.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_smartcard.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_smartcard_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_smbus.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_spi.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_sram.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_tim.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_tim_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_tsc.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_uart.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_uart_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_usart.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_wwdg.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/stm32f3xx_ll_fmc.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_ARM_STD/system_stm32f3xx.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/startup_stm32f334x8.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_adc.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_adc_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_can.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_cec.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_comp.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_cortex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_crc.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_crc_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_dac.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_dac_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_dma.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_flash.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_flash_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_gpio.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_hrtim.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_i2c.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_i2c_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_i2s.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_i2s_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_irda.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_iwdg.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_nand.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_nor.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_opamp.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_opamp_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_pccard.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_pcd.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_pcd_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_pwr.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_pwr_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_rcc.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_rcc_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_rtc.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_rtc_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_sdadc.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_smartcard.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_smartcard_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_smbus.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_spi.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_sram.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_tim.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_tim_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_tsc.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_uart.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_uart_ex.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_usart.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_hal_wwdg.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/stm32f3xx_ll_fmc.o has changed
Binary file TARGET_DISCO_F334C8/TOOLCHAIN_IAR/system_stm32f3xx.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_adc.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_adc_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_comp.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_comp_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_cortex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_crc.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_crc_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_cryp.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_cryp_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_dac.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_dac_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_dma.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_firewall.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_flash.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_flash_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_flash_ramfunc.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_gpio.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_i2c.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_i2c_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_i2s.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_irda.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_iwdg.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_lcd.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_lptim.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_pcd.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_pcd_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_pwr.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_pwr_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_rcc.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_rcc_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_rng.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_rtc.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_rtc_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_smartcard.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_smartcard_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_smbus.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_spi.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_tim.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_tim_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_tsc.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_uart.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_uart_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_usart.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_wwdg.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_MICRO/system_stm32l0xx.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_adc.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_adc_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_comp.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_comp_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_cortex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_crc.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_crc_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_cryp.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_cryp_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_dac.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_dac_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_dma.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_firewall.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_flash.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_flash_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_flash_ramfunc.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_gpio.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_i2c.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_i2c_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_i2s.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_irda.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_iwdg.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_lcd.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_lptim.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_pcd.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_pcd_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_pwr.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_pwr_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_rcc.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_rcc_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_rng.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_rtc.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_rtc_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_smartcard.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_smartcard_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_smbus.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_spi.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_tim.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_tim_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_tsc.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_uart.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_uart_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_usart.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_wwdg.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_ARM_STD/system_stm32l0xx.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/startup_stm32l053xx.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_adc.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_adc_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_comp.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_comp_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_cortex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_crc.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_crc_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_cryp.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_cryp_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_dac.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_dac_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_dma.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_firewall.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_flash.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_flash_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_flash_ramfunc.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_gpio.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_i2c.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_i2c_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_i2s.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_irda.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_iwdg.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_lcd.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_lptim.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_pcd.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_pcd_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_pwr.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_pwr_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_rcc.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_rcc_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_rng.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_rtc.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_rtc_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_smartcard.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_smartcard_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_smbus.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_spi.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_tim.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_tim_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_tsc.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_uart.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_uart_ex.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_usart.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/stm32l0xx_hal_wwdg.o has changed
Binary file TARGET_DISCO_L053C8/TOOLCHAIN_IAR/system_stm32l0xx.o has changed
--- a/TARGET_EFM32GG_STK3700/TARGET_Silicon_Labs/TARGET_EFM32/gpio_object.h Wed May 27 08:07:35 2015 +0100
+++ b/TARGET_EFM32GG_STK3700/TARGET_Silicon_Labs/TARGET_EFM32/gpio_object.h Tue Jun 09 14:29:26 2015 +0100
@@ -25,27 +25,25 @@
typedef struct {
PinName pin;
- uint32_t mask;
- GPIO_Port_TypeDef port;
PinMode mode;
- uint32_t dir;
+ PinDirection dir;
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value)
{
if (value) {
- GPIO_PinOutSet(obj->port, obj->pin & 0xF); // Pin number encoded in first four bits of obj->pin
+ GPIO_PinOutSet((GPIO_Port_TypeDef)((obj->pin >> 4) & 0xF), obj->pin & 0xF); // Pin number encoded in first four bits of obj->pin
} else {
- GPIO_PinOutClear(obj->port, obj->pin & 0xF);
+ GPIO_PinOutClear((GPIO_Port_TypeDef)((obj->pin >> 4) & 0xF), obj->pin & 0xF);
}
}
static inline int gpio_read(gpio_t *obj)
{
if (obj->dir == PIN_INPUT) {
- return GPIO_PinInGet(obj->port, obj->pin & 0xF); // Pin number encoded in first four bits of obj->pin
+ return GPIO_PinInGet((GPIO_Port_TypeDef)((obj->pin >> 4) & 0xF), obj->pin & 0xF); // Pin number encoded in first four bits of obj->pin
} else {
- return GPIO_PinOutGet(obj->port, obj->pin & 0xF);
+ return GPIO_PinOutGet((GPIO_Port_TypeDef)((obj->pin >> 4) & 0xF), obj->pin & 0xF);
}
}
--- a/TARGET_EFM32GG_STK3700/TARGET_Silicon_Labs/TARGET_EFM32/objects.h Wed May 27 08:07:35 2015 +0100
+++ b/TARGET_EFM32GG_STK3700/TARGET_Silicon_Labs/TARGET_EFM32/objects.h Tue Jun 09 14:29:26 2015 +0100
@@ -68,9 +68,9 @@
#if DEVICE_PWMOUT
struct pwmout_s {
//The period of the pulse in clock cycles
- uint32_t period_cycles;
+ uint16_t period_cycles;
//The width of the pulse in clock cycles
- uint32_t width_cycles;
+ uint16_t width_cycles;
//Channel on TIMER
uint32_t channel;
PinName pin;
Binary file TARGET_EFM32GG_STK3700/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_EFM32GG_STK3700/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_EFM32GG_STK3700/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_EFM32GG_STK3700/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_EFM32GG_STK3700/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_EFM32GG_STK3700/TOOLCHAIN_ARM_MICRO/system_efm32gg.o has changed
Binary file TARGET_EFM32GG_STK3700/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_EFM32GG_STK3700/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_EFM32GG_STK3700/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_EFM32GG_STK3700/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_EFM32GG_STK3700/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_EFM32GG_STK3700/TOOLCHAIN_ARM_STD/system_efm32gg.o has changed
Binary file TARGET_EFM32GG_STK3700/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_EFM32GG_STK3700/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
--- a/TARGET_EFM32HG_STK3400/TARGET_Silicon_Labs/TARGET_EFM32/gpio_object.h Wed May 27 08:07:35 2015 +0100
+++ b/TARGET_EFM32HG_STK3400/TARGET_Silicon_Labs/TARGET_EFM32/gpio_object.h Tue Jun 09 14:29:26 2015 +0100
@@ -25,27 +25,25 @@
typedef struct {
PinName pin;
- uint32_t mask;
- GPIO_Port_TypeDef port;
PinMode mode;
- uint32_t dir;
+ PinDirection dir;
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value)
{
if (value) {
- GPIO_PinOutSet(obj->port, obj->pin & 0xF); // Pin number encoded in first four bits of obj->pin
+ GPIO_PinOutSet((GPIO_Port_TypeDef)((obj->pin >> 4) & 0xF), obj->pin & 0xF); // Pin number encoded in first four bits of obj->pin
} else {
- GPIO_PinOutClear(obj->port, obj->pin & 0xF);
+ GPIO_PinOutClear((GPIO_Port_TypeDef)((obj->pin >> 4) & 0xF), obj->pin & 0xF);
}
}
static inline int gpio_read(gpio_t *obj)
{
if (obj->dir == PIN_INPUT) {
- return GPIO_PinInGet(obj->port, obj->pin & 0xF); // Pin number encoded in first four bits of obj->pin
+ return GPIO_PinInGet((GPIO_Port_TypeDef)((obj->pin >> 4) & 0xF), obj->pin & 0xF); // Pin number encoded in first four bits of obj->pin
} else {
- return GPIO_PinOutGet(obj->port, obj->pin & 0xF);
+ return GPIO_PinOutGet((GPIO_Port_TypeDef)((obj->pin >> 4) & 0xF), obj->pin & 0xF);
}
}
--- a/TARGET_EFM32HG_STK3400/TARGET_Silicon_Labs/TARGET_EFM32/objects.h Wed May 27 08:07:35 2015 +0100
+++ b/TARGET_EFM32HG_STK3400/TARGET_Silicon_Labs/TARGET_EFM32/objects.h Tue Jun 09 14:29:26 2015 +0100
@@ -68,9 +68,9 @@
#if DEVICE_PWMOUT
struct pwmout_s {
//The period of the pulse in clock cycles
- uint32_t period_cycles;
+ uint16_t period_cycles;
//The width of the pulse in clock cycles
- uint32_t width_cycles;
+ uint16_t width_cycles;
//Channel on TIMER
uint32_t channel;
PinName pin;
Binary file TARGET_EFM32HG_STK3400/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_EFM32HG_STK3400/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_EFM32HG_STK3400/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_EFM32HG_STK3400/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_EFM32HG_STK3400/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_EFM32HG_STK3400/TOOLCHAIN_ARM_MICRO/system_efm32hg.o has changed
Binary file TARGET_EFM32HG_STK3400/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_EFM32HG_STK3400/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
--- a/TARGET_EFM32LG_STK3600/TARGET_Silicon_Labs/TARGET_EFM32/gpio_object.h Wed May 27 08:07:35 2015 +0100
+++ b/TARGET_EFM32LG_STK3600/TARGET_Silicon_Labs/TARGET_EFM32/gpio_object.h Tue Jun 09 14:29:26 2015 +0100
@@ -25,27 +25,25 @@
typedef struct {
PinName pin;
- uint32_t mask;
- GPIO_Port_TypeDef port;
PinMode mode;
- uint32_t dir;
+ PinDirection dir;
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value)
{
if (value) {
- GPIO_PinOutSet(obj->port, obj->pin & 0xF); // Pin number encoded in first four bits of obj->pin
+ GPIO_PinOutSet((GPIO_Port_TypeDef)((obj->pin >> 4) & 0xF), obj->pin & 0xF); // Pin number encoded in first four bits of obj->pin
} else {
- GPIO_PinOutClear(obj->port, obj->pin & 0xF);
+ GPIO_PinOutClear((GPIO_Port_TypeDef)((obj->pin >> 4) & 0xF), obj->pin & 0xF);
}
}
static inline int gpio_read(gpio_t *obj)
{
if (obj->dir == PIN_INPUT) {
- return GPIO_PinInGet(obj->port, obj->pin & 0xF); // Pin number encoded in first four bits of obj->pin
+ return GPIO_PinInGet((GPIO_Port_TypeDef)((obj->pin >> 4) & 0xF), obj->pin & 0xF); // Pin number encoded in first four bits of obj->pin
} else {
- return GPIO_PinOutGet(obj->port, obj->pin & 0xF);
+ return GPIO_PinOutGet((GPIO_Port_TypeDef)((obj->pin >> 4) & 0xF), obj->pin & 0xF);
}
}
--- a/TARGET_EFM32LG_STK3600/TARGET_Silicon_Labs/TARGET_EFM32/objects.h Wed May 27 08:07:35 2015 +0100
+++ b/TARGET_EFM32LG_STK3600/TARGET_Silicon_Labs/TARGET_EFM32/objects.h Tue Jun 09 14:29:26 2015 +0100
@@ -68,9 +68,9 @@
#if DEVICE_PWMOUT
struct pwmout_s {
//The period of the pulse in clock cycles
- uint32_t period_cycles;
+ uint16_t period_cycles;
//The width of the pulse in clock cycles
- uint32_t width_cycles;
+ uint16_t width_cycles;
//Channel on TIMER
uint32_t channel;
PinName pin;
Binary file TARGET_EFM32LG_STK3600/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_EFM32LG_STK3600/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_EFM32LG_STK3600/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_EFM32LG_STK3600/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_EFM32LG_STK3600/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_EFM32LG_STK3600/TOOLCHAIN_ARM_MICRO/system_efm32lg.o has changed
Binary file TARGET_EFM32LG_STK3600/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_EFM32LG_STK3600/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_EFM32LG_STK3600/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_EFM32LG_STK3600/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_EFM32LG_STK3600/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_EFM32LG_STK3600/TOOLCHAIN_ARM_STD/system_efm32lg.o has changed
Binary file TARGET_EFM32LG_STK3600/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_EFM32LG_STK3600/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
--- a/TARGET_EFM32WG_STK3800/TARGET_Silicon_Labs/TARGET_EFM32/gpio_object.h Wed May 27 08:07:35 2015 +0100
+++ b/TARGET_EFM32WG_STK3800/TARGET_Silicon_Labs/TARGET_EFM32/gpio_object.h Tue Jun 09 14:29:26 2015 +0100
@@ -25,27 +25,25 @@
typedef struct {
PinName pin;
- uint32_t mask;
- GPIO_Port_TypeDef port;
PinMode mode;
- uint32_t dir;
+ PinDirection dir;
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value)
{
if (value) {
- GPIO_PinOutSet(obj->port, obj->pin & 0xF); // Pin number encoded in first four bits of obj->pin
+ GPIO_PinOutSet((GPIO_Port_TypeDef)((obj->pin >> 4) & 0xF), obj->pin & 0xF); // Pin number encoded in first four bits of obj->pin
} else {
- GPIO_PinOutClear(obj->port, obj->pin & 0xF);
+ GPIO_PinOutClear((GPIO_Port_TypeDef)((obj->pin >> 4) & 0xF), obj->pin & 0xF);
}
}
static inline int gpio_read(gpio_t *obj)
{
if (obj->dir == PIN_INPUT) {
- return GPIO_PinInGet(obj->port, obj->pin & 0xF); // Pin number encoded in first four bits of obj->pin
+ return GPIO_PinInGet((GPIO_Port_TypeDef)((obj->pin >> 4) & 0xF), obj->pin & 0xF); // Pin number encoded in first four bits of obj->pin
} else {
- return GPIO_PinOutGet(obj->port, obj->pin & 0xF);
+ return GPIO_PinOutGet((GPIO_Port_TypeDef)((obj->pin >> 4) & 0xF), obj->pin & 0xF);
}
}
--- a/TARGET_EFM32WG_STK3800/TARGET_Silicon_Labs/TARGET_EFM32/objects.h Wed May 27 08:07:35 2015 +0100
+++ b/TARGET_EFM32WG_STK3800/TARGET_Silicon_Labs/TARGET_EFM32/objects.h Tue Jun 09 14:29:26 2015 +0100
@@ -68,9 +68,9 @@
#if DEVICE_PWMOUT
struct pwmout_s {
//The period of the pulse in clock cycles
- uint32_t period_cycles;
+ uint16_t period_cycles;
//The width of the pulse in clock cycles
- uint32_t width_cycles;
+ uint16_t width_cycles;
//Channel on TIMER
uint32_t channel;
PinName pin;
Binary file TARGET_EFM32WG_STK3800/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_EFM32WG_STK3800/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_EFM32WG_STK3800/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_EFM32WG_STK3800/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_EFM32WG_STK3800/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_EFM32WG_STK3800/TOOLCHAIN_ARM_MICRO/system_efm32wg.o has changed
Binary file TARGET_EFM32WG_STK3800/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_EFM32WG_STK3800/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_EFM32WG_STK3800/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_EFM32WG_STK3800/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_EFM32WG_STK3800/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_EFM32WG_STK3800/TOOLCHAIN_ARM_STD/system_efm32wg.o has changed
Binary file TARGET_EFM32WG_STK3800/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_EFM32WG_STK3800/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
--- a/TARGET_EFM32ZG_STK3200/TARGET_Silicon_Labs/TARGET_EFM32/gpio_object.h Wed May 27 08:07:35 2015 +0100
+++ b/TARGET_EFM32ZG_STK3200/TARGET_Silicon_Labs/TARGET_EFM32/gpio_object.h Tue Jun 09 14:29:26 2015 +0100
@@ -25,27 +25,25 @@
typedef struct {
PinName pin;
- uint32_t mask;
- GPIO_Port_TypeDef port;
PinMode mode;
- uint32_t dir;
+ PinDirection dir;
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value)
{
if (value) {
- GPIO_PinOutSet(obj->port, obj->pin & 0xF); // Pin number encoded in first four bits of obj->pin
+ GPIO_PinOutSet((GPIO_Port_TypeDef)((obj->pin >> 4) & 0xF), obj->pin & 0xF); // Pin number encoded in first four bits of obj->pin
} else {
- GPIO_PinOutClear(obj->port, obj->pin & 0xF);
+ GPIO_PinOutClear((GPIO_Port_TypeDef)((obj->pin >> 4) & 0xF), obj->pin & 0xF);
}
}
static inline int gpio_read(gpio_t *obj)
{
if (obj->dir == PIN_INPUT) {
- return GPIO_PinInGet(obj->port, obj->pin & 0xF); // Pin number encoded in first four bits of obj->pin
+ return GPIO_PinInGet((GPIO_Port_TypeDef)((obj->pin >> 4) & 0xF), obj->pin & 0xF); // Pin number encoded in first four bits of obj->pin
} else {
- return GPIO_PinOutGet(obj->port, obj->pin & 0xF);
+ return GPIO_PinOutGet((GPIO_Port_TypeDef)((obj->pin >> 4) & 0xF), obj->pin & 0xF);
}
}
--- a/TARGET_EFM32ZG_STK3200/TARGET_Silicon_Labs/TARGET_EFM32/objects.h Wed May 27 08:07:35 2015 +0100
+++ b/TARGET_EFM32ZG_STK3200/TARGET_Silicon_Labs/TARGET_EFM32/objects.h Tue Jun 09 14:29:26 2015 +0100
@@ -68,9 +68,9 @@
#if DEVICE_PWMOUT
struct pwmout_s {
//The period of the pulse in clock cycles
- uint32_t period_cycles;
+ uint16_t period_cycles;
//The width of the pulse in clock cycles
- uint32_t width_cycles;
+ uint16_t width_cycles;
//Channel on TIMER
uint32_t channel;
PinName pin;
Binary file TARGET_EFM32ZG_STK3200/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_EFM32ZG_STK3200/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_EFM32ZG_STK3200/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_EFM32ZG_STK3200/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_EFM32ZG_STK3200/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_EFM32ZG_STK3200/TOOLCHAIN_ARM_MICRO/system_efm32zg.o has changed
Binary file TARGET_EFM32ZG_STK3200/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_EFM32ZG_STK3200/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
Binary file TARGET_HRM1017/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_HRM1017/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_HRM1017/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_HRM1017/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_HRM1017/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_HRM1017/TOOLCHAIN_ARM_STD/system_nrf51.o has changed
Binary file TARGET_HRM1017/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_HRM1017/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_HRM1017/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_HRM1017/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_HRM1017/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_HRM1017/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_HRM1017/TOOLCHAIN_IAR/startup_NRF51822_IAR.o has changed
Binary file TARGET_HRM1017/TOOLCHAIN_IAR/system_nrf51.o has changed
Binary file TARGET_K20D50M/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_K20D50M/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_K20D50M/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_K20D50M/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_K20D50M/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_K20D50M/TOOLCHAIN_ARM_STD/system_MK20D5.o has changed
Binary file TARGET_K20D50M/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_K20D50M/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_K20D50M/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_K20D50M/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_K20D50M/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_K20D50M/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_K20D50M/TOOLCHAIN_IAR/startup_MK20D5.o has changed
Binary file TARGET_K20D50M/TOOLCHAIN_IAR/system_MK20D5.o has changed
Binary file TARGET_K22F/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_K22F/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_K22F/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_K22F/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_K22F/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_K22F/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_K22F/TOOLCHAIN_ARM_STD/system_MK22F51212.o has changed
Binary file TARGET_K22F/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_K22F/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_K22F/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_K22F/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_K22F/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_K22F/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_K22F/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_K22F/TOOLCHAIN_IAR/startup_MK22F12.o has changed
Binary file TARGET_K22F/TOOLCHAIN_IAR/system_MK22F51212.o has changed
Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/system_MK64F12.o has changed
Binary file TARGET_K64F/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_K64F/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_K64F/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_K64F/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_K64F/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_K64F/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_K64F/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_K64F/TOOLCHAIN_IAR/startup_MK64F12.o has changed
Binary file TARGET_K64F/TOOLCHAIN_IAR/system_MK64F12.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/system_MKL05Z4.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/system_MKL05Z4.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_KL05Z/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_KL05Z/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_IAR/startup_MKL05Z4.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_IAR/system_MKL05Z4.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/system_MKL25Z4.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_KL25Z/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_KL25Z/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_IAR/startup_MKL25Z4.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_IAR/system_MKL25Z4.o has changed
Binary file TARGET_KL43Z/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_KL43Z/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_KL43Z/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_KL43Z/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_KL43Z/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_KL43Z/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_KL43Z/TOOLCHAIN_ARM_STD/system_MKL43Z4.o has changed
Binary file TARGET_KL43Z/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/system_MKL46Z4.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_KL46Z/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_KL46Z/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_IAR/startup_MKL46Z4.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_IAR/system_MKL46Z4.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_LPC1114/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_ARM_MICRO/system_LPC11xx.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC1114/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_LPC1114/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_LPC1114/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_IAR/startup_LPC11xx.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_IAR/system_LPC11xx.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_MICRO/system_LPC11Uxx.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_STD/system_LPC11Uxx.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_IAR/startup_LPC11xx.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_IAR/system_LPC11Uxx.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_MICRO/system_LPC11Uxx.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_STD/system_LPC11Uxx.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_IAR/startup_LPC11xx.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_IAR/system_LPC11Uxx.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_MICRO/system_LPC11Uxx.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_STD/system_LPC11Uxx.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_IAR/startup_LPC11xx.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_IAR/system_LPC11Uxx.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_ARM_MICRO/system_LPC11Uxx.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_ARM_STD/system_LPC11Uxx.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_ARM_MICRO/system_LPC11U6x.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_ARM_STD/system_LPC11U6x.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_IAR/startup_LPC11U6X.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_IAR/system_LPC11U6x.o has changed
Binary file TARGET_LPC1347/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC1347/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC1347/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC1347/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC1347/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC1347/TOOLCHAIN_ARM_STD/system_LPC13Uxx.o has changed
Binary file TARGET_LPC1347/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_LPC1347/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_LPC1347/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_LPC1347/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_LPC1347/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_LPC1347/TOOLCHAIN_IAR/startup_LPC1347.o has changed
Binary file TARGET_LPC1347/TOOLCHAIN_IAR/system_LPC13Uxx.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_LPC1549/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_ARM_MICRO/system_LPC15xx.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC1549/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_LPC1549/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_LPC1549/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_IAR/startup_LPC15xx.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_IAR/system_LPC15xx.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC1768/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_ARM_STD/system_LPC17xx.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_CS/libmbed.a has changed
Binary file TARGET_LPC1768/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_LPC1768/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_IAR/startup_LPC17xx.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_IAR/system_LPC17xx.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/core_arm7.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/system_LPC23xx.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/vector_realmonitor.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/sys_helper.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/system_LPC407x_8x_177x_8x.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC4088/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_LPC4088/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_LPC4088/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_IAR/startup_LPC408x.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_IAR/system_LPC407x_8x_177x_8x.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_ARM_STD/sys_helper.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_ARM_STD/system_LPC407x_8x_177x_8x.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_IAR/startup_LPC408x.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_IAR/system_LPC407x_8x_177x_8x.o has changed
Binary file TARGET_LPC4337/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC4337/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC4337/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC4337/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC4337/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC4337/TOOLCHAIN_ARM_STD/system_LPC43xx.o has changed
Binary file TARGET_LPC812/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_LPC812/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_LPC812/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_LPC812/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_LPC812/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_LPC812/TOOLCHAIN_ARM_MICRO/system_LPC8xx.o has changed
Binary file TARGET_LPC812/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_LPC812/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_LPC812/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_LPC812/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_LPC812/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_LPC812/TOOLCHAIN_IAR/startup_LPC8xx.o has changed
Binary file TARGET_LPC812/TOOLCHAIN_IAR/system_LPC8xx.o has changed
Binary file TARGET_LPC824/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_LPC824/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_LPC824/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_LPC824/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_LPC824/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_LPC824/TOOLCHAIN_ARM_MICRO/system_LPC8xx.o has changed
Binary file TARGET_LPC824/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC824/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_LPC824/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_LPC824/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_LPC824/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_LPC824/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_LPC824/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_LPC824/TOOLCHAIN_IAR/startup_LPC8xx.o has changed
Binary file TARGET_LPC824/TOOLCHAIN_IAR/system_LPC8xx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_MAX32600MBED/TARGET_Maxim/TARGET_MAX32600/PeripheralPins.h Tue Jun 09 14:29:26 2015 +0100 @@ -0,0 +1,65 @@ +/******************************************************************************* + * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included + * in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS + * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES + * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Except as contained in this notice, the name of Maxim Integrated + * Products, Inc. shall not be used except as stated in the Maxim Integrated + * Products, Inc. Branding Policy. + * + * The mere transfer of this software does not imply any licenses + * of trade secrets, proprietary technology, copyrights, patents, + * trademarks, maskwork rights, or any other form of intellectual + * property whatsoever. Maxim Integrated Products, Inc. retains all + * ownership rights. + ******************************************************************************* + */ + +#ifndef MBED_PERIPHERALPINS_H +#define MBED_PERIPHERALPINS_H + +#include "pinmap.h" +#include "PeripheralNames.h" + +/************I2C***************/ +extern const PinMap PinMap_I2C_SDA[]; +extern const PinMap PinMap_I2C_SCL[]; + +/************UART***************/ +extern const PinMap PinMap_UART_TX[]; +extern const PinMap PinMap_UART_RX[]; +extern const PinMap PinMap_UART_CTS[]; +extern const PinMap PinMap_UART_RTS[]; + +/************SPI***************/ +extern const PinMap PinMap_SPI_SCLK[]; +extern const PinMap PinMap_SPI_MOSI[]; +extern const PinMap PinMap_SPI_MISO[]; +extern const PinMap PinMap_SPI_SSEL[]; + +/************PWM***************/ +extern const PinMap PinMap_PWM[]; + +/************ADC***************/ +extern const PinMap PinMap_ADC[]; + +/************DAC***************/ +extern const PinMap PinMap_DAC[]; + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/TARGET_Maxim/TARGET_MAX32600/PortNames.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,55 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ Port0 = 0,
+ Port1 = 1,
+ Port2 = 2,
+ Port3 = 3,
+ Port4 = 4,
+ Port5 = 5,
+ Port6 = 6,
+ Port7 = 7
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/TARGET_Maxim/TARGET_MAX32600/TARGET_MAX32600MBED/PeripheralNames.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,86 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ UART_0 = MXC_BASE_UART0,
+ UART_1 = MXC_BASE_UART1,
+ STDIO_UART = UART_1
+} UARTName;
+
+typedef enum {
+ I2C_0 = MXC_BASE_I2CM0,
+ I2C_1 = MXC_BASE_I2CM1
+} I2CName;
+
+typedef enum {
+ SPI_0 = MXC_BASE_SPI0,
+ SPI_1 = MXC_BASE_SPI1,
+ SPI_2 = MXC_BASE_SPI2
+} SPIName;
+
+typedef enum {
+ PWM_0 = MXC_BASE_PT0,
+ PWM_1 = MXC_BASE_PT1,
+ PWM_2 = MXC_BASE_PT2,
+ PWM_3 = MXC_BASE_PT3,
+ PWM_4 = MXC_BASE_PT4,
+ PWM_5 = MXC_BASE_PT5,
+ PWM_6 = MXC_BASE_PT6,
+ PWM_7 = MXC_BASE_PT7
+} PWMName;
+
+typedef enum {
+ ADC = MXC_BASE_ADC
+} ADCName;
+
+typedef enum {
+ DAC0 = MXC_BASE_DAC0,
+ DAC1 = MXC_BASE_DAC1,
+ DAC2 = MXC_BASE_DAC2,
+ DAC3 = MXC_BASE_DAC3,
+} DACName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/TARGET_Maxim/TARGET_MAX32600/TARGET_MAX32600MBED/PinNames.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,267 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+#include "gpio_regs.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PIN_INPUT = MXC_V_GPIO_OUT_MODE_HIGH_Z,
+ PIN_OUTPUT = MXC_V_GPIO_OUT_MODE_NORMAL_DRIVE
+} PinDirection;
+
+#define PORT_SHIFT 12
+#define PINNAME_TO_PORT(name) ((unsigned int)(name) >> PORT_SHIFT)
+#define PINNAME_TO_PIN(name) ((unsigned int)(name) & ~(0xFFFFFFFF << PORT_SHIFT))
+
+typedef enum {
+ P0_0 = (0 << PORT_SHIFT) | 0,
+ P0_1 = (0 << PORT_SHIFT) | 1,
+ P0_2 = (0 << PORT_SHIFT) | 2,
+ P0_3 = (0 << PORT_SHIFT) | 3,
+ P0_4 = (0 << PORT_SHIFT) | 4,
+ P0_5 = (0 << PORT_SHIFT) | 5,
+ P0_6 = (0 << PORT_SHIFT) | 6,
+ P0_7 = (0 << PORT_SHIFT) | 7,
+
+ P1_0 = (1 << PORT_SHIFT) | 0,
+ P1_1 = (1 << PORT_SHIFT) | 1,
+ P1_2 = (1 << PORT_SHIFT) | 2,
+ P1_3 = (1 << PORT_SHIFT) | 3,
+ P1_4 = (1 << PORT_SHIFT) | 4,
+ P1_5 = (1 << PORT_SHIFT) | 5,
+ P1_6 = (1 << PORT_SHIFT) | 6,
+ P1_7 = (1 << PORT_SHIFT) | 7,
+
+ P2_0 = (2 << PORT_SHIFT) | 0,
+ P2_1 = (2 << PORT_SHIFT) | 1,
+ P2_2 = (2 << PORT_SHIFT) | 2,
+ P2_3 = (2 << PORT_SHIFT) | 3,
+ P2_4 = (2 << PORT_SHIFT) | 4,
+ P2_5 = (2 << PORT_SHIFT) | 5,
+ P2_6 = (2 << PORT_SHIFT) | 6,
+ P2_7 = (2 << PORT_SHIFT) | 7,
+
+ P3_0 = (3 << PORT_SHIFT) | 0,
+ P3_1 = (3 << PORT_SHIFT) | 1,
+ P3_2 = (3 << PORT_SHIFT) | 2,
+ P3_3 = (3 << PORT_SHIFT) | 3,
+ P3_4 = (3 << PORT_SHIFT) | 4,
+ P3_5 = (3 << PORT_SHIFT) | 5,
+ P3_6 = (3 << PORT_SHIFT) | 6,
+ P3_7 = (3 << PORT_SHIFT) | 7,
+
+ P4_0 = (4 << PORT_SHIFT) | 0,
+ P4_1 = (4 << PORT_SHIFT) | 1,
+ P4_2 = (4 << PORT_SHIFT) | 2,
+ P4_3 = (4 << PORT_SHIFT) | 3,
+ P4_4 = (4 << PORT_SHIFT) | 4,
+ P4_5 = (4 << PORT_SHIFT) | 5,
+ P4_6 = (4 << PORT_SHIFT) | 6,
+ P4_7 = (4 << PORT_SHIFT) | 7,
+
+ P5_0 = (5 << PORT_SHIFT) | 0,
+ P5_1 = (5 << PORT_SHIFT) | 1,
+ P5_2 = (5 << PORT_SHIFT) | 2,
+ P5_3 = (5 << PORT_SHIFT) | 3,
+ P5_4 = (5 << PORT_SHIFT) | 4,
+ P5_5 = (5 << PORT_SHIFT) | 5,
+ P5_6 = (5 << PORT_SHIFT) | 6,
+ P5_7 = (5 << PORT_SHIFT) | 7,
+
+ P6_0 = (6 << PORT_SHIFT) | 0,
+ P6_1 = (6 << PORT_SHIFT) | 1,
+ P6_2 = (6 << PORT_SHIFT) | 2,
+ P6_3 = (6 << PORT_SHIFT) | 3,
+ P6_4 = (6 << PORT_SHIFT) | 4,
+ P6_5 = (6 << PORT_SHIFT) | 5,
+ P6_6 = (6 << PORT_SHIFT) | 6,
+ P6_7 = (6 << PORT_SHIFT) | 7,
+
+ P7_0 = (7 << PORT_SHIFT) | 0,
+ P7_1 = (7 << PORT_SHIFT) | 1,
+ P7_2 = (7 << PORT_SHIFT) | 2,
+ P7_3 = (7 << PORT_SHIFT) | 3,
+ P7_4 = (7 << PORT_SHIFT) | 4,
+ P7_5 = (7 << PORT_SHIFT) | 5,
+ P7_6 = (7 << PORT_SHIFT) | 6,
+ P7_7 = (7 << PORT_SHIFT) | 7,
+
+ // Analog ADC pins
+ AIN_0P = (0xA << PORT_SHIFT) | 0,
+ AIN_1P = (0xA << PORT_SHIFT) | 1,
+ AIN_2P = (0xA << PORT_SHIFT) | 2,
+ AIN_3P = (0xA << PORT_SHIFT) | 3,
+ AIN_4P = (0xA << PORT_SHIFT) | 4,
+ AIN_5P = (0xA << PORT_SHIFT) | 5,
+ AIN_6P = (0xA << PORT_SHIFT) | 6,
+ AIN_7P = (0xA << PORT_SHIFT) | 7,
+
+ AIN_0N = (0xB << PORT_SHIFT) | 0,
+ AIN_1N = (0xB << PORT_SHIFT) | 1,
+ AIN_2N = (0xB << PORT_SHIFT) | 2,
+ AIN_3N = (0xB << PORT_SHIFT) | 3,
+ AIN_4N = (0xB << PORT_SHIFT) | 4,
+ AIN_5N = (0xB << PORT_SHIFT) | 5,
+ AIN_6N = (0xB << PORT_SHIFT) | 6,
+ AIN_7N = (0xB << PORT_SHIFT) | 7,
+
+ // Analog differential ADC
+ AIN_0D = (0xC << PORT_SHIFT) | 0,
+ AIN_1D = (0xC << PORT_SHIFT) | 1,
+ AIN_2D = (0xC << PORT_SHIFT) | 2,
+ AIN_3D = (0xC << PORT_SHIFT) | 3,
+ AIN_4D = (0xC << PORT_SHIFT) | 4,
+ AIN_5D = (0xC << PORT_SHIFT) | 5,
+ AIN_6D = (0xC << PORT_SHIFT) | 6,
+ AIN_7D = (0xC << PORT_SHIFT) | 7,
+
+ // OPAMP Positive supply pins
+ AOUT_AP = (0xD << PORT_SHIFT) | 0,
+ AOUT_BP = (0xD << PORT_SHIFT) | 1,
+ AOUT_CP = (0xD << PORT_SHIFT) | 2,
+ AOUT_DP = (0xD << PORT_SHIFT) | 3,
+
+ // OPAMP Negative supply pins
+ AOUT_AN = (0xE << PORT_SHIFT) | 0,
+ AOUT_BN = (0xE << PORT_SHIFT) | 1,
+ AOUT_CN = (0xE << PORT_SHIFT) | 2,
+ AOUT_DN = (0xE << PORT_SHIFT) | 3,
+
+ // DAC Output pins
+ AOUT_AO = (0xF << PORT_SHIFT) | 0,
+ AOUT_BO = (0xF << PORT_SHIFT) | 1,
+ AOUT_CO = (0xF << PORT_SHIFT) | 2,
+ AOUT_DO = (0xF << PORT_SHIFT) | 3,
+
+ LED_GREEN = P6_6,
+ LED_RED = P7_1,
+ LED_YELLOW = P7_0,
+ LED_BLUE = P6_7,
+
+ // mbed original LED naming
+ LED1 = LED_RED,
+ LED2 = LED_GREEN,
+ LED3 = LED_BLUE,
+ LED4 = LED_YELLOW,
+
+ // Push button
+ SW2 = P6_4,
+ SW3 = P6_5,
+
+ // UART pins
+ USBTX = P7_3,
+ USBRX = P7_2,
+ STDIO_UART_TX = USBTX,
+ STDIO_UART_RX = USBRX,
+
+ // I2C pins
+ I2C0_SCL = P2_4,
+ I2C0_SDA = P2_5,
+
+ I2C1_SCL = P2_7,
+ I2C1_SDA = P2_6,
+
+ // UART pins
+ UART0_RX = P1_0,
+ UART0_TX = P1_1,
+ UART0_CTS = P1_2,
+ UART0_RTS = P1_3,
+
+ UART1_RX = P1_2,
+ UART1_TX = P1_3,
+ UART1_CTS = P2_6,
+ UART1_RTS = P2_7,
+
+ // SPI pins
+ SPI0_SCK = P6_0,
+ SPI0_MOSI = P6_1,
+ SPI0_MISO = P6_2,
+ SPI0_SS = P6_3,
+
+ SPI2_SCK = P2_0,
+ SPI2_MOSI = P2_1,
+ SPI2_MISO = P2_2,
+ SPI2_SS = P2_3,
+
+ // Arduino Headers
+ D0 = P1_0,
+ D1 = P1_1,
+ D2 = P1_2,
+ D3 = P1_3,
+ D4 = P1_4,
+ D5 = P1_5,
+ D6 = P1_6,
+ D7 = P1_7,
+ D8 = P2_5,
+ D9 = P2_4,
+ D10 = P2_3,
+ D11 = P2_1,
+ D12 = P2_2,
+ D13 = P2_0,
+ D14 = P2_6,
+ D15 = P2_7,
+ A0 = AIN_0P,
+ A1 = AIN_1P,
+ A2 = AIN_2P,
+ A3 = AIN_3P,
+ A4 = AIN_4P,
+ A5 = AIN_5P,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullUp,
+ OpenDrain,
+ PullNone,
+ PullDefault = PullUp
+} PinMode;
+
+typedef enum {
+ LED_ON = 0,
+ LED_OFF = 1
+} LedStates;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_MAX32600MBED/TARGET_Maxim/TARGET_MAX32600/device.h Tue Jun 09 14:29:26 2015 +0100 @@ -0,0 +1,74 @@ +/******************************************************************************* + * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included + * in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS + * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES + * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Except as contained in this notice, the name of Maxim Integrated + * Products, Inc. shall not be used except as stated in the Maxim Integrated + * Products, Inc. Branding Policy. + * + * The mere transfer of this software does not imply any licenses + * of trade secrets, proprietary technology, copyrights, patents, + * trademarks, maskwork rights, or any other form of intellectual + * property whatsoever. Maxim Integrated Products, Inc. retains all + * ownership rights. + ******************************************************************************* + */ + +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_SERIAL 1 + +#define DEVICE_SERIAL_FC 1 + +#define DEVICE_SPI 1 + +#define DEVICE_I2C 1 + +#define DEVICE_SERIAL 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_ANALOGIN 1 + +#define DEVICE_ANALOGOUT 1 + +#define DEVICE_RTC 1 + +#define DEVICE_SLEEP 1 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_PATTERN 1 + +#define DEVICE_LOWPOWERTIMER 1 + +#define DEVICE_CAN 0 +#define DEVICE_ETHERNET 0 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/TARGET_Maxim/TARGET_MAX32600/gpio_object.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,71 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef MBED_GPIO_OBJECT_H
+#define MBED_GPIO_OBJECT_H
+
+#include "mbed_assert.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName name;
+ __IO uint32_t *reg_out;
+ __I uint32_t *reg_in;
+} gpio_t;
+
+static inline void gpio_write(gpio_t *obj, int value)
+{
+ MBED_ASSERT(obj->name != (PinName)NC);
+ *obj->reg_out = !!value;
+}
+
+static inline int gpio_read(gpio_t *obj)
+{
+ MBED_ASSERT(obj->name != (PinName)NC);
+ return *obj->reg_in;
+}
+
+void pin_dir(PinName name, PinDirection direction);
+
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->name != (PinName)NC;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/TARGET_Maxim/TARGET_MAX32600/objects.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,118 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+#include "gpio_object.h"
+#include "gpio_regs.h"
+#include "uart_regs.h"
+#include "i2cm_regs.h"
+#include "spi_regs.h"
+#include "pt_regs.h"
+#include "adc_regs.h"
+#include "dac_regs.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ __IO uint32_t *reg_out;
+ __I uint32_t *reg_in;
+};
+
+struct gpio_irq_s {
+ uint8_t port;
+ uint8_t pin;
+};
+
+struct serial_s {
+ int index;
+ mxc_uart_regs_t *uart;
+};
+
+struct i2c_s {
+ int index;
+ mxc_i2cm_regs_t *i2c;
+ volatile uint16_t *txfifo;
+ volatile uint16_t *rxfifo;
+ int start_pending;
+ int stop_pending;
+};
+
+struct spi_s {
+ int index;
+ mxc_spi_regs_t *spi;
+ mxc_spi_rxfifo_regs_t *rxfifo;
+ mxc_spi_txfifo_regs_t *txfifo;
+};
+
+struct pwmout_s {
+ mxc_pt_regs_t *pwm;
+ int period;
+ int pulse_width;
+};
+
+struct analogin_s {
+ mxc_adc_regs_t *adc;
+ mxc_adccfg_regs_t *adccfg;
+ mxc_adc_fifo_regs_t * adc_fifo;
+ PinName adc_pin;
+};
+
+struct dac_s {
+ int index;
+ uint16_t out;
+ mxc_dac_regs_t *dac;
+ mxc_dac_fifo_t * dac_fifo;
+};
+
+typedef struct {
+ volatile uint32_t *reg_req;
+ volatile uint32_t *reg_ack;
+ uint32_t req_val;
+ uint32_t ack_mask;
+} pin_function_t;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/TOOLCHAIN_ARM_STD/MAX32600.sct Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,21 @@
+
+; MAX32600
+; 256KB FLASH (0x40000) @ 0x000000000
+; 2KB RAM (0x8000) @ 0x20000000
+
+
+; MAX32600: 256KB FLASH (0x40000) + 32KB RAM (0x8000)
+
+LR_IROM1 0x00000000 0x40000 { ; load region size_region
+ ER_IROM1 0x00000000 0x40000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; [RAM] Vector table dynamic copy: 79 vectors * 4 bytes = (0x140) - alignment
+ RW_IRAM1 (0x20000000+0x140) (0x8000-0x140) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+}
\ No newline at end of file
Binary file TARGET_MAX32600MBED/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_MAX32600MBED/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_MAX32600MBED/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_MAX32600MBED/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_MAX32600MBED/TOOLCHAIN_ARM_STD/startup_MAX32600.o has changed
Binary file TARGET_MAX32600MBED/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_MAX32600MBED/TOOLCHAIN_ARM_STD/system_max32600.o has changed
Binary file TARGET_MAX32600MBED/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_MAX32600MBED/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_MAX32600MBED/TOOLCHAIN_GCC_ARM/libmbed.a has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/TOOLCHAIN_GCC_ARM/max32600.ld Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,182 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+/******************************************************************************
+ *
+ * Linker configuration file, default ARM Cortex M3 produced by Maxim Integrated Inc.
+ *
+ *****************************************************************************/
+
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 0x00040000 /* start from 0x0, fullsize flash, 256k */
+ RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00008000 /* full-size SRAM, 32k */
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.isr_vector))
+ *(.text*)
+
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+
+ } > RAM
+
+ .bss :
+ {
+ __bss_start__ = .;
+ *(.bss*)
+ *(COMMON)
+ __bss_end__ = .;
+ } > RAM
+
+ .heap :
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy :
+ {
+ *(.stack)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
Binary file TARGET_MAX32600MBED/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_MAX32600MBED/TOOLCHAIN_GCC_ARM/startup_max32600.o has changed
Binary file TARGET_MAX32600MBED/TOOLCHAIN_GCC_ARM/system_max32600.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/TOOLCHAIN_IAR/MAX32600.icf Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,29 @@
+/* [ROM] */
+define symbol __intvec_start__ = 0x0;
+define symbol __region_ROM_start__ = 0x0;
+define symbol __region_ROM_end__ = 0x0003FFFF;
+
+/* [RAM] Vector table dynamic copy: 79 vectors * 4 bytes = 316 bytes (0x13C) */
+define symbol __NVIC_start__ = 0x00000000;
+define symbol __NVIC_end__ = 0x00000140; /* to be aligned on 8 bytes */
+define symbol __region_RAM_start__ = 0x20000000;
+define symbol __region_RAM_end__ = 0x20007FFF;
+
+/* Memory regions */
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __region_ROM_start__ to __region_ROM_end__];
+define region RAM_region = mem:[from __region_RAM_start__ to __region_RAM_end__];
+
+/* Stack and Heap */
+define symbol __size_cstack__ = 0x800;
+define symbol __size_heap__ = 0x800;
+define block CSTACK with alignment = 8, size = __size_cstack__ { };
+define block HEAP with alignment = 8, size = __size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__intvec_start__ { readonly section .intvec };
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block CSTACK, block HEAP };
Binary file TARGET_MAX32600MBED/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_MAX32600MBED/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_MAX32600MBED/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_MAX32600MBED/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_MAX32600MBED/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_MAX32600MBED/TOOLCHAIN_IAR/startup_MAX32600.o has changed
Binary file TARGET_MAX32600MBED/TOOLCHAIN_IAR/system_max32600.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/adc_regs.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,466 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef _MXC_ADC_REGS_H
+#define _MXC_ADC_REGS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/**
+ * @file adc_regs.h
+ * @addtogroup adc ADC
+ * @{
+ */
+
+/**
+ * @brief Defines ADC Modes.
+ */
+typedef enum {
+ /** Single Mode Full Rate */
+ MXC_E_ADC_MODE_SMPLCNT_FULL_RATE = 0,
+ /** Single Mode Low Power */
+ MXC_E_ADC_MODE_SMPLCNT_LOW_POWER = 1,
+ /** Continuous Mode Full Rate */
+ MXC_E_ADC_MODE_CONTINUOUS_FULL_RATE = 2,
+ /** Continuous Mode Low Power */
+ MXC_E_ADC_MODE_CONTINUOUS_LOW_POWER = 3,
+ /** Single Mode Full Rate with Scan Enabled */
+ MXC_E_ADC_MODE_SMPLCNT_SCAN_FULL_RATE = 8,
+ /** Single Mode Low Power with Scan Enabled */
+ MXC_E_ADC_MODE_SMPLCNT_SCAN_LOW_POWER = 9,
+ /** Continuous Mode Full Rate with Scan Enabled */
+ MXC_E_ADC_MODE_CONTINUOUS_SCAN_FULL_RATE = 10,
+ /** Continuous Mode Low Power with Scan Enabled */
+ MXC_E_ADC_MODE_CONTINUOUS_SCAN_LOW_POWER = 11
+} mxc_adc_mode_t;
+
+/**
+ * @brief Defines ADC Range Control.
+ */
+typedef enum {
+ /** Bi-polar Operation (-Vref/2 -> Vref/2) */
+ MXC_E_ADC_RANGE_HALF = 0,
+ /** Bi-polar Operation (-Vref -> Vref) */
+ MXC_E_ADC_RANGE_FULL
+} mxc_adc_range_t;
+
+/**
+ * @brief Defines ADC Bipolar operation.
+ */
+typedef enum {
+ /** Uni-polar operation (0 -> Vref) */
+ MXC_E_ADC_BI_POL_UNIPOLAR = 0,
+ /** Bi-polar operation see ADC Range Control */
+ MXC_E_ADC_BI_POL_BIPOLAR
+} mxc_adc_bi_pol_t;
+
+/**
+ * @brief Defines Decimation Filter Modes.
+ */
+typedef enum {
+ /** Decimation Filter ByPassed */
+ MXC_E_ADC_AVG_MODE_FILTER_BYPASS = 0,
+ /** Output Average Only*/
+ MXC_E_ADC_AVG_MODE_FILTER_OUTPUT,
+ /** Output Average and Raw Data (Test Mode Only) */
+ MXC_E_ADC_AVG_MODE_FILTER_OUTPUT_RAW
+} mxc_adc_avg_mode_t;
+
+/**
+ * @brief Defines ADC StartMode Modes.
+ */
+typedef enum {
+ /** StarMode via Software */
+ MXC_E_ADC_STRT_MODE_SOFTWARE = 0,
+ /** StarMode via PulseTrain */
+ MXC_E_ADC_STRT_MODE_PULSETRAIN
+} mxc_adc_strt_mode_t;
+
+/**
+ * @brief Defines Mux Channel Select for the Positive Input to the ADC.
+ */
+typedef enum {
+ /** Single Mode Input AIN0+; Diff Mode AIN0+/AIN8- */
+ MXC_E_ADC_PGA_MUX_CH_SEL_AIN0 = 0,
+ /** Single Mode Input AIN1+; Diff Mode AIN1+/AIN9- */
+ MXC_E_ADC_PGA_MUX_CH_SEL_AIN1 = 1,
+ /** Single Mode Input AIN2+; Diff Mode AIN2+/AIN10- */
+ MXC_E_ADC_PGA_MUX_CH_SEL_AIN2 = 2,
+ /** Single Mode Input AIN3+; Diff Mode AIN3+/AIN11- */
+ MXC_E_ADC_PGA_MUX_CH_SEL_AIN3 = 3,
+ /** Single Mode Input AIN4+; Diff Mode AIN4+/AIN12- */
+ MXC_E_ADC_PGA_MUX_CH_SEL_AIN4 = 4,
+ /** Single Mode Input AIN5+; Diff Mode AIN5+/AIN13- */
+ MXC_E_ADC_PGA_MUX_CH_SEL_AIN5 = 5,
+ /** Single Mode Input AIN6+; Diff Mode AIN6+/AIN14- */
+ MXC_E_ADC_PGA_MUX_CH_SEL_AIN6 = 6,
+ /** Single Mode Input AIN7+; Diff Mode AIN7+/AIN15- */
+ MXC_E_ADC_PGA_MUX_CH_SEL_AIN7 = 7,
+ /** Single Mode Input AIN8+ */
+ MXC_E_ADC_PGA_MUX_CH_SEL_AIN8 = 8,
+ /** Single Mode Input AIN9+ */
+ MXC_E_ADC_PGA_MUX_CH_SEL_AIN9 = 9,
+ /** Single Mode Input AIN10+ */
+ MXC_E_ADC_PGA_MUX_CH_SEL_AIN10 = 10,
+ /** Single Mode Input AIN11+ */
+ MXC_E_ADC_PGA_MUX_CH_SEL_AIN11 = 11,
+ /** Single Mode Input AIN12+ */
+ MXC_E_ADC_PGA_MUX_CH_SEL_AIN12 = 12,
+ /** Single Mode Input AIN13+ */
+ MXC_E_ADC_PGA_MUX_CH_SEL_AIN13 = 13,
+ /** Single Mode Input AIN14+ */
+ MXC_E_ADC_PGA_MUX_CH_SEL_AIN14 = 14,
+ /** Single Mode Input AIN15+ */
+ MXC_E_ADC_PGA_MUX_CH_SEL_AIN15 = 15,
+ /** Positive Input VSSADC */
+ MXC_E_ADC_PGA_MUX_CH_SEL_VSSADC = 16,
+ /** Positive Input TMON_R */
+ MXC_E_ADC_PGA_MUX_CH_SEL_TMON_R = 17,
+ /** Positive Input VDDA/4 */
+ MXC_E_ADC_PGA_MUX_CH_SEL_VDDA4 = 18,
+ /** Positive Input PWRMAN_TST */
+ MXC_E_ADC_PGA_MUX_CH_SEL_PWRMON_TST = 19,
+ /** Positive Input Ain0Div */
+ MXC_E_ADC_PGA_MUX_CH_SEL_AIN0DIV = 20,
+ /** Positive Input OpAmp OUTA */
+ MXC_E_ADC_PGA_MUX_CH_SEL_OUTA = 32,
+ /** Positive Input OpAmp OUTB */
+ MXC_E_ADC_PGA_MUX_CH_SEL_OUTB = 33,
+ /** Positive Input OpAmp OUTC */
+ MXC_E_ADC_PGA_MUX_CH_SEL_OUTC = 34,
+ /** Positive Input OpAmp OUTD */
+ MXC_E_ADC_PGA_MUX_CH_SEL_OUTD = 35,
+ /** Positive INA+ */
+ MXC_E_ADC_PGA_MUX_CH_SEL_INAPLUS = 36,
+ /** Positive SNO_or */
+ MXC_E_ADC_PGA_MUX_CH_SEL_SNO_OR = 37,
+ /** Positive SCM_or */
+ MXC_E_ADC_PGA_MUX_CH_SEL_SCM_OR = 38,
+ /** Positive TPROBE_sense */
+ MXC_E_ADC_PGA_MUX_CH_SEL_TPROBE_SENSE = 48,
+ /** Positive VREFDAC */
+ MXC_E_ADC_PGA_MUX_CH_SEL_VREFDAC = 49,
+ /** Positive VREFADJ */
+ MXC_E_ADC_PGA_MUX_CH_SEL_VREFADJ = 50,
+ /** Positive Vdd3xtal */
+ MXC_E_ADC_PGA_MUX_CH_SEL_VDD3XTAL = 51
+} mxc_adc_pga_mux_ch_sel_t;
+
+/**
+ * @brief Decoded with the MUX Channel Select to enable Differential Mode Input to the ADC.
+ */
+typedef enum {
+ /** Differential Mode Disabled */
+ MXC_E_ADC_PGA_MUX_DIFF_DISABLE = 0,
+ /** Differential Mode Enabled */
+ MXC_E_ADC_PGA_MUX_DIFF_ENABLE
+} mxc_adc_pga_mux_diff_t;
+
+/**
+ * @brief Defines the PGA Gain Options.
+ */
+typedef enum {
+ /** PGA Gain = 1 */
+ MXC_E_ADC_PGA_GAIN_1 = 0,
+ /** PGA Gain = 2 */
+ MXC_E_ADC_PGA_GAIN_2,
+ /** PGA Gain = 4 */
+ MXC_E_ADC_PGA_GAIN_4,
+ /** PGA Gain = 8 */
+ MXC_E_ADC_PGA_GAIN_8,
+} mxc_adc_pga_gain_t;
+
+/**
+ * @brief Defines the Switch Control Mode.
+ */
+typedef enum {
+ /** Switch Control Mode = Software */
+ MXC_E_ADC_SPST_SW_CTRL_SOFTWARE = 0,
+ /** Switch Control Mode = Pulse Train */
+ MXC_E_ADC_SPST_SW_CTRL_PULSETRAIN
+} mxc_adc_spst_sw_ctrl_t;
+
+/**
+ * @brief Defines the number of channels to scan when Scan Mode is enabled.
+ */
+typedef enum {
+ /** Number of Channels to Scan = 1 */
+ MXC_E_ADC_SCAN_CNT_1 = 0,
+ /** Number of Channels to Scan = 2 */
+ MXC_E_ADC_SCAN_CNT_2,
+ /** Number of Channels to Scan = 3 */
+ MXC_E_ADC_SCAN_CNT_3,
+ /** Number of Channels to Scan = 4 */
+ MXC_E_ADC_SCAN_CNT_4,
+ /** Number of Channels to Scan = 5 */
+ MXC_E_ADC_SCAN_CNT_5,
+ /** Number of Channels to Scan = 6 */
+ MXC_E_ADC_SCAN_CNT_6,
+ /** Number of Channels to Scan = 7 */
+ MXC_E_ADC_SCAN_CNT_7,
+ /** Number of Channels to Scan = 8 */
+ MXC_E_ADC_SCAN_CNT_8,
+} mxc_adc_scan_cnt_t;
+
+/* Offset Register Description
+ ====== =================================================== */
+typedef struct {
+ __IO uint32_t ctrl0; /* 0x0000 ADC Control Register 0 */
+ __IO uint32_t pga_ctrl; /* 0x0004 PGA Control Register */
+ __IO uint32_t tg_ctrl0; /* 0x0008 ADC Timing Generator Control 0 */
+ __IO uint32_t tg_ctrl1; /* 0x000C ADC Timing Generator Control 1 */
+ __IO uint32_t limit; /* 0x0010 ADC Limit Settings */
+ __IO uint32_t intr; /* 0x0014 ADC Interrupt Flags and Enable/Disable Controls */
+ __IO uint32_t out; /* 0x0018 ADC Output Register */
+} mxc_adc_regs_t;
+
+/* Offset Register Description
+ ====== =================================================== */
+typedef struct {
+ __IO uint32_t ctrl1; /* 0x0000 ADC Control Register 1 */
+ __IO uint32_t scan1; /* 0x0004 ADC Auto-Scan Settings 1 */
+ __IO uint32_t scan2; /* 0x0008 ADC Auto-Scan Settings 2 */
+ __IO uint32_t ro_cal0; /* 0x000C ADC Ring Osc Calibration 0 */
+ __IO uint32_t ro_cal1; /* 0x0010 ADC Ring Osc Calibration 1 */
+} mxc_adccfg_regs_t;
+
+typedef struct {
+ __IO uint16_t data; /* 0x0000 Read to pull sample data from ADC FIFO */
+} mxc_adc_fifo_regs_t;
+
+/*
+ Register offsets for module ADC, ADCCFG, ADC_FIFO
+*/
+#define MXC_R_ADC_OFFS_CTRL0 ((uint32_t)0x00000000UL)
+#define MXC_R_ADC_OFFS_PGA_CTRL ((uint32_t)0x00000004UL)
+#define MXC_R_ADC_OFFS_TG_CTRL0 ((uint32_t)0x00000008UL)
+#define MXC_R_ADC_OFFS_TG_CTRL1 ((uint32_t)0x0000000CUL)
+#define MXC_R_ADC_OFFS_LIMIT ((uint32_t)0x00000010UL)
+#define MXC_R_ADC_OFFS_INTR ((uint32_t)0x00000014UL)
+#define MXC_R_ADC_OFFS_OUT ((uint32_t)0x00000018UL)
+
+#define MXC_R_ADCCFG_OFFS_CTRL1 ((uint32_t)0x00000000UL)
+#define MXC_R_ADCCFG_OFFS_SCAN1 ((uint32_t)0x00000004UL)
+#define MXC_R_ADCCFG_OFFS_SCAN2 ((uint32_t)0x00000008UL)
+#define MXC_R_ADCCFG_OFFS_RO_CAL0 ((uint32_t)0x0000000CUL)
+#define MXC_R_ADCCFG_OFFS_RO_CAL1 ((uint32_t)0x00000010UL)
+#define MXC_R_ADC_FIFO_OFFS_DATA ((uint32_t)0x00000000UL)
+
+/*
+ Field positions and masks for module ADC.
+*/
+#define MXC_F_ADC_CTRL0_ADC_WAKE_CNT_POS 0
+#define MXC_F_ADC_CTRL0_ADC_WAKE_CNT ((uint32_t)(0x0000000FUL << MXC_F_ADC_CTRL0_ADC_WAKE_CNT_POS))
+#define MXC_F_ADC_CTRL0_ADC_STRT_MODE_POS 5
+#define MXC_F_ADC_CTRL0_ADC_STRT_MODE ((uint32_t)(0x00000001UL << MXC_F_ADC_CTRL0_ADC_STRT_MODE_POS))
+#define MXC_F_ADC_CTRL0_ADC_RANGE_POS 6
+#define MXC_F_ADC_CTRL0_ADC_RANGE ((uint32_t)(0x00000001UL << MXC_F_ADC_CTRL0_ADC_RANGE_POS))
+#define MXC_F_ADC_CTRL0_ADC_BI_POL_POS 7
+#define MXC_F_ADC_CTRL0_ADC_BI_POL ((uint32_t)(0x00000001UL << MXC_F_ADC_CTRL0_ADC_BI_POL_POS))
+#define MXC_F_ADC_CTRL0_ADC_DV_REG_POS 8
+#define MXC_F_ADC_CTRL0_ADC_DV_REG ((uint32_t)(0x00000001UL << MXC_F_ADC_CTRL0_ADC_DV_REG_POS))
+#define MXC_F_ADC_CTRL0_ADC_DV_POS 9
+#define MXC_F_ADC_CTRL0_ADC_DV ((uint32_t)(0x00000001UL << MXC_F_ADC_CTRL0_ADC_DV_POS))
+#define MXC_F_ADC_CTRL0_ADC_LMT_DMODE_POS 10
+#define MXC_F_ADC_CTRL0_ADC_LMT_DMODE ((uint32_t)(0x00000001UL << MXC_F_ADC_CTRL0_ADC_LMT_DMODE_POS))
+#define MXC_F_ADC_CTRL0_ADC_SMP_EXT_POS 11
+#define MXC_F_ADC_CTRL0_ADC_SMP_EXT ((uint32_t)(0x00000001UL << MXC_F_ADC_CTRL0_ADC_SMP_EXT_POS))
+#define MXC_F_ADC_CTRL0_ADC_CLK_EN_POS 12
+#define MXC_F_ADC_CTRL0_ADC_CLK_EN ((uint32_t)(0x00000001UL << MXC_F_ADC_CTRL0_ADC_CLK_EN_POS))
+#define MXC_F_ADC_CTRL0_CPU_ADC_RST_POS 13
+#define MXC_F_ADC_CTRL0_CPU_ADC_RST ((uint32_t)(0x00000001UL << MXC_F_ADC_CTRL0_CPU_ADC_RST_POS))
+#define MXC_F_ADC_CTRL0_CPU_ADC_START_POS 14
+#define MXC_F_ADC_CTRL0_CPU_ADC_START ((uint32_t)(0x00000001UL << MXC_F_ADC_CTRL0_CPU_ADC_START_POS))
+#define MXC_F_ADC_CTRL0_CPU_ADC_EN_POS 15
+#define MXC_F_ADC_CTRL0_CPU_ADC_EN ((uint32_t)(0x00000001UL << MXC_F_ADC_CTRL0_CPU_ADC_EN_POS))
+#define MXC_F_ADC_CTRL0_ADC_FIFO_FULL_POS 18
+#define MXC_F_ADC_CTRL0_ADC_FIFO_FULL ((uint32_t)(0x00000001UL << MXC_F_ADC_CTRL0_ADC_FIFO_FULL_POS))
+#define MXC_F_ADC_CTRL0_ADC_FIFO_EMPTY_POS 19
+#define MXC_F_ADC_CTRL0_ADC_FIFO_EMPTY ((uint32_t)(0x00000001UL << MXC_F_ADC_CTRL0_ADC_FIFO_EMPTY_POS))
+#define MXC_F_ADC_CTRL0_AVG_MODE_POS 20
+#define MXC_F_ADC_CTRL0_AVG_MODE ((uint32_t)(0x00000003UL << MXC_F_ADC_CTRL0_AVG_MODE_POS))
+#define MXC_F_ADC_CTRL0_CPU_DAC_START_POS 22
+#define MXC_F_ADC_CTRL0_CPU_DAC_START ((uint32_t)(0x00000001UL << MXC_F_ADC_CTRL0_CPU_DAC_START_POS))
+#define MXC_F_ADC_CTRL0_ADC_CLK_MODE_POS 24
+#define MXC_F_ADC_CTRL0_ADC_CLK_MODE ((uint32_t)(0x00000007UL << MXC_F_ADC_CTRL0_ADC_CLK_MODE_POS))
+#define MXC_F_ADC_CTRL0_ADC_MODE_POS 28
+#define MXC_F_ADC_CTRL0_ADC_MODE ((uint32_t)(0x0000000FUL << MXC_F_ADC_CTRL0_ADC_MODE_POS))
+
+#define MXC_F_ADC_PGA_CTRL_PGA_GAIN_POS 0
+#define MXC_F_ADC_PGA_CTRL_PGA_GAIN ((uint32_t)(0x00000003UL << MXC_F_ADC_PGA_CTRL_PGA_GAIN_POS))
+#define MXC_F_ADC_PGA_CTRL_CPU_PGA_RST_CLK_EN_POS 2
+#define MXC_F_ADC_PGA_CTRL_CPU_PGA_RST_CLK_EN ((uint32_t)(0x00000001UL << MXC_F_ADC_PGA_CTRL_CPU_PGA_RST_CLK_EN_POS))
+#define MXC_F_ADC_PGA_CTRL_CPU_PGA_RST_POS 3
+#define MXC_F_ADC_PGA_CTRL_CPU_PGA_RST ((uint32_t)(0x00000001UL << MXC_F_ADC_PGA_CTRL_CPU_PGA_RST_POS))
+#define MXC_F_ADC_PGA_CTRL_CPU_PGA_TRK_DELAY_POS 4
+#define MXC_F_ADC_PGA_CTRL_CPU_PGA_TRK_DELAY ((uint32_t)(0x00000001UL << MXC_F_ADC_PGA_CTRL_CPU_PGA_TRK_DELAY_POS))
+#define MXC_F_ADC_PGA_CTRL_CPU_PGA_TRK_POS 5
+#define MXC_F_ADC_PGA_CTRL_CPU_PGA_TRK ((uint32_t)(0x00000001UL << MXC_F_ADC_PGA_CTRL_CPU_PGA_TRK_POS))
+#define MXC_F_ADC_PGA_CTRL_CPU_PGA_BYPASS_POS 6
+#define MXC_F_ADC_PGA_CTRL_CPU_PGA_BYPASS ((uint32_t)(0x00000001UL << MXC_F_ADC_PGA_CTRL_CPU_PGA_BYPASS_POS))
+#define MXC_F_ADC_PGA_CTRL_PGA_WAKE_CNT_POS 8
+#define MXC_F_ADC_PGA_CTRL_PGA_WAKE_CNT ((uint32_t)(0x0000001FUL << MXC_F_ADC_PGA_CTRL_PGA_WAKE_CNT_POS))
+#define MXC_F_ADC_PGA_CTRL_MUX_SW_AIN_POS 13
+#define MXC_F_ADC_PGA_CTRL_MUX_SW_AIN ((uint32_t)(0x00000001UL << MXC_F_ADC_PGA_CTRL_MUX_SW_AIN_POS))
+#define MXC_F_ADC_PGA_CTRL_MUX_DIFF_POS 14
+#define MXC_F_ADC_PGA_CTRL_MUX_DIFF ((uint32_t)(0x00000001UL << MXC_F_ADC_PGA_CTRL_MUX_DIFF_POS))
+#define MXC_F_ADC_PGA_CTRL_MUX_MODE_POS 15
+#define MXC_F_ADC_PGA_CTRL_MUX_MODE ((uint32_t)(0x00000001UL << MXC_F_ADC_PGA_CTRL_MUX_MODE_POS))
+#define MXC_F_ADC_PGA_CTRL_PGA_RST_CLK_CNT_POS 20
+#define MXC_F_ADC_PGA_CTRL_PGA_RST_CLK_CNT ((uint32_t)(0x0000000FUL << MXC_F_ADC_PGA_CTRL_PGA_RST_CLK_CNT_POS))
+#define MXC_F_ADC_PGA_CTRL_MUX_CH_SEL_POS 24
+#define MXC_F_ADC_PGA_CTRL_MUX_CH_SEL ((uint32_t)(0x0000003FUL << MXC_F_ADC_PGA_CTRL_MUX_CH_SEL_POS))
+
+#define MXC_F_ADC_TG_CTRL0_PGA_TRK_CNT_POS 0
+#define MXC_F_ADC_TG_CTRL0_PGA_TRK_CNT ((uint32_t)(0x0000FFFFUL << MXC_F_ADC_TG_CTRL0_PGA_TRK_CNT_POS))
+#define MXC_F_ADC_TG_CTRL0_ADC_SMPL_CNT_POS 16
+#define MXC_F_ADC_TG_CTRL0_ADC_SMPL_CNT ((uint32_t)(0x0000FFFFUL << MXC_F_ADC_TG_CTRL0_ADC_SMPL_CNT_POS))
+
+#define MXC_F_ADC_TG_CTRL1_PGA_ACQ_CNT_POS 0
+#define MXC_F_ADC_TG_CTRL1_PGA_ACQ_CNT ((uint32_t)(0x0000000FUL << MXC_F_ADC_TG_CTRL1_PGA_ACQ_CNT_POS))
+#define MXC_F_ADC_TG_CTRL1_FIFO_AF_CNT_POS 4
+#define MXC_F_ADC_TG_CTRL1_FIFO_AF_CNT ((uint32_t)(0x0000000FUL << MXC_F_ADC_TG_CTRL1_FIFO_AF_CNT_POS))
+#define MXC_F_ADC_TG_CTRL1_ADC_BRST_CNT_POS 8
+#define MXC_F_ADC_TG_CTRL1_ADC_BRST_CNT ((uint32_t)(0x00000007UL << MXC_F_ADC_TG_CTRL1_ADC_BRST_CNT_POS))
+#define MXC_F_ADC_TG_CTRL1_ADC_ACQ_CNT_POS 12
+#define MXC_F_ADC_TG_CTRL1_ADC_ACQ_CNT ((uint32_t)(0x0000000FUL << MXC_F_ADC_TG_CTRL1_ADC_ACQ_CNT_POS))
+#define MXC_F_ADC_TG_CTRL1_ADC_SLP_CNT_POS 16
+#define MXC_F_ADC_TG_CTRL1_ADC_SLP_CNT ((uint32_t)(0x0000FFFFUL << MXC_F_ADC_TG_CTRL1_ADC_SLP_CNT_POS))
+
+#define MXC_F_ADC_LIMIT_LO_LIMIT_POS 0
+#define MXC_F_ADC_LIMIT_LO_LIMIT ((uint32_t)(0x0000FFFFUL << MXC_F_ADC_LIMIT_LO_LIMIT_POS))
+#define MXC_F_ADC_LIMIT_HI_LIMIT_POS 16
+#define MXC_F_ADC_LIMIT_HI_LIMIT ((uint32_t)(0x0000FFFFUL << MXC_F_ADC_LIMIT_HI_LIMIT_POS))
+
+#define MXC_F_ADC_INTR_FIFO_AF_POS 6
+#define MXC_F_ADC_INTR_FIFO_AF ((uint32_t)(0x00000001UL << MXC_F_ADC_INTR_FIFO_AF_POS))
+#define MXC_F_ADC_INTR_OUT_RNG_IF_POS 7
+#define MXC_F_ADC_INTR_OUT_RNG_IF ((uint32_t)(0x00000001UL << MXC_F_ADC_INTR_OUT_RNG_IF_POS))
+#define MXC_F_ADC_INTR_HI_RNG_IF_POS 8
+#define MXC_F_ADC_INTR_HI_RNG_IF ((uint32_t)(0x00000001UL << MXC_F_ADC_INTR_HI_RNG_IF_POS))
+#define MXC_F_ADC_INTR_LO_RNG_IF_POS 9
+#define MXC_F_ADC_INTR_LO_RNG_IF ((uint32_t)(0x00000001UL << MXC_F_ADC_INTR_LO_RNG_IF_POS))
+#define MXC_F_ADC_INTR_DONE_IF_POS 10
+#define MXC_F_ADC_INTR_DONE_IF ((uint32_t)(0x00000001UL << MXC_F_ADC_INTR_DONE_IF_POS))
+#define MXC_F_ADC_INTR_FIFO_UF_IF_POS 11
+#define MXC_F_ADC_INTR_FIFO_UF_IF ((uint32_t)(0x00000001UL << MXC_F_ADC_INTR_FIFO_UF_IF_POS))
+#define MXC_F_ADC_INTR_FIFO_OF_IF_POS 12
+#define MXC_F_ADC_INTR_FIFO_OF_IF ((uint32_t)(0x00000001UL << MXC_F_ADC_INTR_FIFO_OF_IF_POS))
+#define MXC_F_ADC_INTR_FIFO_3Q_IF_POS 13
+#define MXC_F_ADC_INTR_FIFO_3Q_IF ((uint32_t)(0x00000001UL << MXC_F_ADC_INTR_FIFO_3Q_IF_POS))
+#define MXC_F_ADC_INTR_FIFO_2Q_IF_POS 14
+#define MXC_F_ADC_INTR_FIFO_2Q_IF ((uint32_t)(0x00000001UL << MXC_F_ADC_INTR_FIFO_2Q_IF_POS))
+#define MXC_F_ADC_INTR_FIFO_1Q_IF_POS 15
+#define MXC_F_ADC_INTR_FIFO_1Q_IF ((uint32_t)(0x00000001UL << MXC_F_ADC_INTR_FIFO_1Q_IF_POS))
+#define MXC_F_ADC_INTR_SPST0_CTRL_MODE_POS 16
+#define MXC_F_ADC_INTR_SPST0_CTRL_MODE ((uint32_t)(0x00000001UL << MXC_F_ADC_INTR_SPST0_CTRL_MODE_POS))
+#define MXC_F_ADC_INTR_SPST1_CTRL_MODE_POS 17
+#define MXC_F_ADC_INTR_SPST1_CTRL_MODE ((uint32_t)(0x00000001UL << MXC_F_ADC_INTR_SPST1_CTRL_MODE_POS))
+#define MXC_F_ADC_INTR_SPST2_CTRL_MODE_POS 18
+#define MXC_F_ADC_INTR_SPST2_CTRL_MODE ((uint32_t)(0x00000001UL << MXC_F_ADC_INTR_SPST2_CTRL_MODE_POS))
+#define MXC_F_ADC_INTR_SPST3_CTRL_MODE_POS 19
+#define MXC_F_ADC_INTR_SPST3_CTRL_MODE ((uint32_t)(0x00000001UL << MXC_F_ADC_INTR_SPST3_CTRL_MODE_POS))
+#define MXC_F_ADC_INTR_OUT_RNG_IE_POS 23
+#define MXC_F_ADC_INTR_OUT_RNG_IE ((uint32_t)(0x00000001UL << MXC_F_ADC_INTR_OUT_RNG_IE_POS))
+#define MXC_F_ADC_INTR_HI_RNG_IE_POS 24
+#define MXC_F_ADC_INTR_HI_RNG_IE ((uint32_t)(0x00000001UL << MXC_F_ADC_INTR_HI_RNG_IE_POS))
+#define MXC_F_ADC_INTR_LO_RNG_IE_POS 25
+#define MXC_F_ADC_INTR_LO_RNG_IE ((uint32_t)(0x00000001UL << MXC_F_ADC_INTR_LO_RNG_IE_POS))
+#define MXC_F_ADC_INTR_DONE_IE_POS 26
+#define MXC_F_ADC_INTR_DONE_IE ((uint32_t)(0x00000001UL << MXC_F_ADC_INTR_DONE_IE_POS))
+#define MXC_F_ADC_INTR_FIFO_UF_IE_POS 27
+#define MXC_F_ADC_INTR_FIFO_UF_IE ((uint32_t)(0x00000001UL << MXC_F_ADC_INTR_FIFO_UF_IE_POS))
+#define MXC_F_ADC_INTR_FIFO_OF_IE_POS 28
+#define MXC_F_ADC_INTR_FIFO_OF_IE ((uint32_t)(0x00000001UL << MXC_F_ADC_INTR_FIFO_OF_IE_POS))
+#define MXC_F_ADC_INTR_FIFO_3Q_IE_POS 29
+#define MXC_F_ADC_INTR_FIFO_3Q_IE ((uint32_t)(0x00000001UL << MXC_F_ADC_INTR_FIFO_3Q_IE_POS))
+#define MXC_F_ADC_INTR_FIFO_2Q_IE_POS 30
+#define MXC_F_ADC_INTR_FIFO_2Q_IE ((uint32_t)(0x00000001UL << MXC_F_ADC_INTR_FIFO_2Q_IE_POS))
+#define MXC_F_ADC_INTR_FIFO_1Q_IE_POS 31
+#define MXC_F_ADC_INTR_FIFO_1Q_IE ((uint32_t)(0x00000001UL << MXC_F_ADC_INTR_FIFO_1Q_IE_POS))
+
+#define MXC_F_ADC_OUT_DATA_REG_POS 0
+#define MXC_F_ADC_OUT_DATA_REG ((uint32_t)(0x0000FFFFUL << MXC_F_ADC_OUT_DATA_REG_POS))
+
+#define MXC_F_ADC_CTRL1_ADC_SCAN_CNT_POS 16
+#define MXC_F_ADC_CTRL1_ADC_SCAN_CNT ((uint32_t)(0x00000007UL << MXC_F_ADC_CTRL1_ADC_SCAN_CNT_POS))
+
+#define MXC_F_ADC_SCAN1_ADC_SCAN0_POS 0
+#define MXC_F_ADC_SCAN1_ADC_SCAN0 ((uint32_t)(0x000000FFUL << MXC_F_ADC_SCAN1_ADC_SCAN0_POS))
+#define MXC_F_ADC_SCAN1_ADC_SCAN1_POS 8
+#define MXC_F_ADC_SCAN1_ADC_SCAN1 ((uint32_t)(0x000000FFUL << MXC_F_ADC_SCAN1_ADC_SCAN1_POS))
+#define MXC_F_ADC_SCAN1_ADC_SCAN2_POS 16
+#define MXC_F_ADC_SCAN1_ADC_SCAN2 ((uint32_t)(0x000000FFUL << MXC_F_ADC_SCAN1_ADC_SCAN2_POS))
+#define MXC_F_ADC_SCAN1_ADC_SCAN3_POS 24
+#define MXC_F_ADC_SCAN1_ADC_SCAN3 ((uint32_t)(0x000000FFUL << MXC_F_ADC_SCAN1_ADC_SCAN3_POS))
+
+#define MXC_F_ADC_SCAN2_ADC_SCAN4_POS 0
+#define MXC_F_ADC_SCAN2_ADC_SCAN4 ((uint32_t)(0x000000FFUL << MXC_F_ADC_SCAN2_ADC_SCAN4_POS))
+#define MXC_F_ADC_SCAN2_ADC_SCAN5_POS 8
+#define MXC_F_ADC_SCAN2_ADC_SCAN5 ((uint32_t)(0x000000FFUL << MXC_F_ADC_SCAN2_ADC_SCAN5_POS))
+#define MXC_F_ADC_SCAN2_ADC_SCAN6_POS 16
+#define MXC_F_ADC_SCAN2_ADC_SCAN6 ((uint32_t)(0x000000FFUL << MXC_F_ADC_SCAN2_ADC_SCAN6_POS))
+#define MXC_F_ADC_SCAN2_ADC_SCAN7_POS 24
+#define MXC_F_ADC_SCAN2_ADC_SCAN7 ((uint32_t)(0x000000FFUL << MXC_F_ADC_SCAN2_ADC_SCAN7_POS))
+
+#define MXC_F_ADC_RO_CAL0_RO_CAL_EN_POS 0
+#define MXC_F_ADC_RO_CAL0_RO_CAL_EN ((uint32_t)(0x00000001UL << MXC_F_ADC_RO_CAL0_RO_CAL_EN_POS))
+#define MXC_F_ADC_RO_CAL0_RO_CAL_RUN_POS 1
+#define MXC_F_ADC_RO_CAL0_RO_CAL_RUN ((uint32_t)(0x00000001UL << MXC_F_ADC_RO_CAL0_RO_CAL_RUN_POS))
+#define MXC_F_ADC_RO_CAL0_RO_CAL_LOAD_POS 2
+#define MXC_F_ADC_RO_CAL0_RO_CAL_LOAD ((uint32_t)(0x00000001UL << MXC_F_ADC_RO_CAL0_RO_CAL_LOAD_POS))
+#define MXC_F_ADC_RO_CAL0_TRM_MU_POS 8
+#define MXC_F_ADC_RO_CAL0_TRM_MU ((uint32_t)(0x00000FFFUL << MXC_F_ADC_RO_CAL0_TRM_MU_POS))
+#define MXC_F_ADC_RO_CAL0_RO_TRM_POS 23
+#define MXC_F_ADC_RO_CAL0_RO_TRM ((uint32_t)(0x000001FFUL << MXC_F_ADC_RO_CAL0_RO_TRM_POS))
+
+#define MXC_F_ADC_RO_CAL1_TRM_INIT_POS 0
+#define MXC_F_ADC_RO_CAL1_TRM_INIT ((uint32_t)(0x000001FFUL << MXC_F_ADC_RO_CAL1_TRM_INIT_POS))
+#define MXC_F_ADC_RO_CAL1_TRM_MIN_POS 10
+#define MXC_F_ADC_RO_CAL1_TRM_MIN ((uint32_t)(0x000001FFUL << MXC_F_ADC_RO_CAL1_TRM_MIN_POS))
+#define MXC_F_ADC_RO_CAL1_TRM_MAX_POS 20
+#define MXC_F_ADC_RO_CAL1_TRM_MAX ((uint32_t)(0x000001FFUL << MXC_F_ADC_RO_CAL1_TRM_MAX_POS))
+
+#ifdef __cplusplus
+}
+#endif
+
+/**
+ * @}
+ */
+
+#endif /* _MXC_ADC_REGS_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/aes_regs.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,159 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef _MXC_AES_REGS_H_
+#define _MXC_AES_REGS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/**
+ * @file aes_regs.h
+ * @addtogroup aes AES
+ * @{
+ */
+
+/**
+ * @brief Settings for AES_CTRL.CRYPT_MODE
+ */
+typedef enum {
+ MXC_E_AES_CTRL_ENCRYPT_MODE = 0,
+ MXC_E_AES_CTRL_DECRYPT_MODE = 1
+} mxc_aes_ctrl_crypt_mode_t;
+
+/**
+ * @brief Settings for AES_CTRL.EXP_KEY_MODE
+ */
+typedef enum {
+ MXC_E_AES_CTRL_CALC_NEW_EXP_KEY = 0,
+ MXC_E_AES_CTRL_USE_LAST_EXP_KEY = 1
+} mxc_aes_ctrl_exp_key_mode_t;
+
+/**
+ * @brief Settings for AES_CTRL.KEY_SIZE
+ */
+typedef enum {
+ MXC_E_AES_CTRL_KEY_SIZE_128 = 0,
+ MXC_E_AES_CTRL_KEY_SIZE_192 = 1,
+ MXC_E_AES_CTRL_KEY_SIZE_256 = 2
+} mxc_aes_ctrl_key_size_t;
+
+/* Offset Register Description
+ ====== =========================================================== */
+typedef struct {
+ __IO uint32_t ctrl; /* 0x0000 AES Control and Status */
+ __I uint32_t rsv004; /* 0x0004 */
+ __IO uint32_t erase_all; /* 0x0008 Write to Trigger AES Memory Erase */
+} mxc_aes_regs_t;
+
+/* Offset Register Description
+ ====== =========================================================== */
+typedef struct {
+ __IO uint32_t inp[4]; /* 0x0000 AES Input 0..3 */
+ __IO uint32_t key[8]; /* 0x0010 AES Key 0..7 */
+ __IO uint32_t out[4]; /* 0x0030 AES Output 0..3 */
+ __IO uint32_t expkey[8]; /* 0x0040 AES Expanded Key Data 0..7 */
+} mxc_aes_mem_regs_t;
+
+/*
+ Register offsets for module AES.
+*/
+#define MXC_R_AES_OFFS_CTRL ((uint32_t)0x00000000UL)
+#define MXC_R_AES_OFFS_ERASE_ALL ((uint32_t)0x00000008UL)
+#define MXC_R_AES_MEM_OFFS_INP0 ((uint32_t)0x00000000UL)
+#define MXC_R_AES_MEM_OFFS_INP1 ((uint32_t)0x00000004UL)
+#define MXC_R_AES_MEM_OFFS_INP2 ((uint32_t)0x00000008UL)
+#define MXC_R_AES_MEM_OFFS_INP3 ((uint32_t)0x0000000CUL)
+#define MXC_R_AES_MEM_OFFS_KEY0 ((uint32_t)0x00000010UL)
+#define MXC_R_AES_MEM_OFFS_KEY1 ((uint32_t)0x00000014UL)
+#define MXC_R_AES_MEM_OFFS_KEY2 ((uint32_t)0x00000018UL)
+#define MXC_R_AES_MEM_OFFS_KEY3 ((uint32_t)0x0000001CUL)
+#define MXC_R_AES_MEM_OFFS_KEY4 ((uint32_t)0x00000020UL)
+#define MXC_R_AES_MEM_OFFS_KEY5 ((uint32_t)0x00000024UL)
+#define MXC_R_AES_MEM_OFFS_KEY6 ((uint32_t)0x00000028UL)
+#define MXC_R_AES_MEM_OFFS_KEY7 ((uint32_t)0x0000002CUL)
+#define MXC_R_AES_MEM_OFFS_OUT0 ((uint32_t)0x00000030UL)
+#define MXC_R_AES_MEM_OFFS_OUT1 ((uint32_t)0x00000034UL)
+#define MXC_R_AES_MEM_OFFS_OUT2 ((uint32_t)0x00000038UL)
+#define MXC_R_AES_MEM_OFFS_OUT3 ((uint32_t)0x0000003CUL)
+#define MXC_R_AES_MEM_OFFS_EXPKEY0 ((uint32_t)0x00000040UL)
+#define MXC_R_AES_MEM_OFFS_EXPKEY1 ((uint32_t)0x00000044UL)
+#define MXC_R_AES_MEM_OFFS_EXPKEY2 ((uint32_t)0x00000048UL)
+#define MXC_R_AES_MEM_OFFS_EXPKEY3 ((uint32_t)0x0000004CUL)
+#define MXC_R_AES_MEM_OFFS_EXPKEY4 ((uint32_t)0x00000050UL)
+#define MXC_R_AES_MEM_OFFS_EXPKEY5 ((uint32_t)0x00000054UL)
+#define MXC_R_AES_MEM_OFFS_EXPKEY6 ((uint32_t)0x00000058UL)
+#define MXC_R_AES_MEM_OFFS_EXPKEY7 ((uint32_t)0x0000005CUL)
+
+#define MXC_F_AES_CTRL_START_POS 0
+#define MXC_F_AES_CTRL_START ((uint32_t)(0x00000001UL << MXC_F_AES_CTRL_START_POS))
+#define MXC_F_AES_CTRL_CRYPT_MODE_POS 1
+#define MXC_F_AES_CTRL_CRYPT_MODE ((uint32_t)(0x00000001UL << MXC_F_AES_CTRL_CRYPT_MODE_POS))
+#define MXC_F_AES_CTRL_EXP_KEY_MODE_POS 2
+#define MXC_F_AES_CTRL_EXP_KEY_MODE ((uint32_t)(0x00000001UL << MXC_F_AES_CTRL_EXP_KEY_MODE_POS))
+#define MXC_F_AES_CTRL_KEY_SIZE_POS 3
+#define MXC_F_AES_CTRL_KEY_SIZE ((uint32_t)(0x00000003UL << MXC_F_AES_CTRL_KEY_SIZE_POS))
+#define MXC_F_AES_CTRL_INTEN_POS 5
+#define MXC_F_AES_CTRL_INTEN ((uint32_t)(0x00000001UL << MXC_F_AES_CTRL_INTEN_POS))
+#define MXC_F_AES_CTRL_INTFL_POS 6
+#define MXC_F_AES_CTRL_INTFL ((uint32_t)(0x00000001UL << MXC_F_AES_CTRL_INTFL_POS))
+
+#define MXC_V_AES_CTRL_ENCRYPT_MODE 0
+#define MXC_V_AES_CTRL_DECRYPT_MODE 1
+#define MXC_S_AES_CTRL_ENCRYPT_MODE ((uint32_t)(MXC_V_AES_CTRL_ENCRYPT_MODE << MXC_F_AES_CTRL_CRYPT_MODE_POS))
+#define MXC_S_AES_CTRL_DECRYPT_MODE ((uint32_t)(MXC_V_AES_CTRL_DECRYPT_MODE << MXC_F_AES_CTRL_CRYPT_MODE_POS))
+
+#define MXC_V_AES_CTRL_CALC_NEW_EXP_KEY 0
+#define MXC_V_AES_CTRL_USE_LAST_EXP_KEY 1
+#define MXC_S_AES_CTRL_CALC_NEW_EXP_KEY ((uint32_t)(MXC_V_AES_CTRL_CALC_NEW_EXP_KEY << MXC_F_AES_CTRL_EXP_KEY_MODE_POS))
+#define MXC_S_AES_CTRL_USE_LAST_EXP_KEY ((uint32_t)(MXC_V_AES_CTRL_USE_LAST_EXP_KEY << MXC_F_AES_CTRL_EXP_KEY_MODE_POS))
+
+#define MXC_V_AES_CTRL_KEY_SIZE_128 0
+#define MXC_V_AES_CTRL_KEY_SIZE_192 1
+#define MXC_V_AES_CTRL_KEY_SIZE_256 2
+#define MXC_S_AES_CTRL_KEY_SIZE_128 ((uint32_t)(MXC_V_AES_CTRL_KEY_SIZE_128 << MXC_F_AES_CTRL_KEY_SIZE_POS))
+#define MXC_S_AES_CTRL_KEY_SIZE_192 ((uint32_t)(MXC_V_AES_CTRL_KEY_SIZE_192 << MXC_F_AES_CTRL_KEY_SIZE_POS))
+#define MXC_S_AES_CTRL_KEY_SIZE_256 ((uint32_t)(MXC_V_AES_CTRL_KEY_SIZE_256 << MXC_F_AES_CTRL_KEY_SIZE_POS))
+
+#ifdef __cplusplus
+}
+#endif
+
+/**
+* @}
+*/
+
+#endif /* _MXC_AES_REGS_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/afe_regs.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,626 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef _MXC_AFE_REGS_H
+#define _MXC_AFE_REGS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/**
+ * @file afe_regs.h
+ * @addtogroup afe AFE
+ * @{
+ */
+
+/**
+ * @brief Defines Configure Options for the LED Ports.
+ */
+typedef enum {
+ /** LED Sink Port 0 with OpAmp A, LED Sink Port 1 with OpAmp C */
+ MXC_E_AFE_LED_CFG_PORT_OPAMP_A_C = 0,
+ /** LED Sink Port 0 with OpAmp B, LED Sink Port 1 with OpAmp D */
+ MXC_E_AFE_LED_CFG_PORT_OPAMP_B_D,
+ /** Disable LED Sink Port 0,Disable LED Sink Port 1 */
+ MXC_E_AFE_LED_CFG_PORT_DISABLED,
+} mxc_afe_led_cfg_port_t;
+
+/**
+ * @brief Setup of Wake Up Detector for LPCs.
+ */
+typedef enum {
+ /** IDLE */
+ MXC_E_AFE_EN_WUD_COMP_IDLE = 0,
+ /** Activate WUD for falling edges */
+ MXC_E_AFE_EN_WUD_COMP_FALLING_EDGE = 2,
+ /** Activate WUD for rising edges */
+ MXC_E_AFE_EN_WUD_COMP_RISING_EDGE = 3
+} mxc_afe_en_wud_comp_t;
+
+/**
+ * @brief LPC InMode.
+ */
+typedef enum {
+ /** InMode: both Nch and Pch */
+ MXC_E_AFE_IN_MODE_COMP_NCH_PCH = 0,
+ /** InMode: only Nch */
+ MXC_E_AFE_IN_MODE_COMP_NCH,
+ /** InMode: only Pch */
+ MXC_E_AFE_IN_MODE_COMP_PCH,
+} mxc_afe_in_mode_comp_t;
+
+/**
+ * @brief LPC Bias.
+ */
+typedef enum {
+ /** BIAS 0.52uA Delay 4.0us */
+ MXC_E_AFE_BIAS_MODE_COMP_0 = 0,
+ /** BIAS 1.4uA Delay 1.7us */
+ MXC_E_AFE_BIAS_MODE_COMP_1,
+ /** BIAS 2.8uA Delay 1.1us */
+ MXC_E_AFE_BIAS_MODE_COMP_2,
+ /** BIAS 5.1uA Delay 0.7us */
+ MXC_E_AFE_BIAS_MODE_COMP_3
+} mxc_afe_bias_mode_comp_t;
+
+/**
+ * @brief TMON Current Value.
+ */
+typedef enum {
+ /** TMON Current 4uA */
+ MXC_E_AFE_TMON_CURRENT_VAL_0 = 0,
+ /** TMON Current 60uA */
+ MXC_E_AFE_TMON_CURRENT_VAL_1,
+ /** TMON Current 64uA */
+ MXC_E_AFE_TMON_CURRENT_VAL_2,
+ /** TMON Current 120uA */
+ MXC_E_AFE_TMON_CURRENT_VAL_3
+} mxc_afe_tmon_current_t;
+
+/**
+ * @brief REFADC and REFDAC Voltage Select.
+ */
+typedef enum {
+ /** Voltage Reference = 1.024 V */
+ MXC_E_AFE_REF_VOLT_SEL_1024 = 0,
+ /** Voltage Reference = 1.5 V */
+ MXC_E_AFE_REF_VOLT_SEL_1500,
+ /** Voltage Reference = 2.048 V */
+ MXC_E_AFE_REF_VOLT_SEL_2048,
+ /** Voltage Reference = 2.5 V */
+ MXC_E_AFE_REF_VOLT_SEL_2500
+} mxc_afe_ref_volt_sel_t;
+
+/**
+ * @brief Selection for DAC VOltage Reference, REFADC or REFDAC.
+ */
+typedef enum {
+ /** DAC Voltage Reference = REFADC */
+ MXC_E_AFE_DAC_REF_REFADC = 0,
+ /** DAC Voltage Reference = REFDAC */
+ MXC_E_AFE_DAC_REF_REFDAC
+} mxc_afe_dac_ref_t;
+
+/**
+ * @brief Selection for LPC Hysteresis.
+ */
+typedef enum {
+ /** LPC Hysteresis = 0 mV */
+ MXC_E_AFE_HYST_COMP_0 = 0,
+ /** LPC Hysteresis = 7.5 mV */
+ MXC_E_AFE_HYST_COMP_1,
+ /** LPC Hysteresis = 15 mV */
+ MXC_E_AFE_HYST_COMP_2,
+ /** LPC Hysteresis = 30 mV */
+ MXC_E_AFE_HYST_COMP_3
+} mxc_afe_hyst_comp_t;
+
+/**
+ * @brief Selection for MUX for SCM_or_sel.
+ */
+typedef enum {
+ /** SCM_or = HIZ */
+ MXC_E_AFE_SCM_OR_SEL_HIZ = 0,
+ /** SCM_or = SCM0 */
+ MXC_E_AFE_SCM_OR_SEL_SCM0,
+ /** SCM_or = SCM1 */
+ MXC_E_AFE_SCM_OR_SEL_SCM1,
+ /** SCM_or = SCM2 */
+ MXC_E_AFE_SCM_OR_SEL_SCM2,
+ /** SCM_or = SCM3 */
+ MXC_E_AFE_SCM_OR_SEL_SCM3
+} mxc_afe_scm_or_sel_t;
+
+/**
+ * @brief Selection for MUX for SNO_or_sel.
+ */
+typedef enum {
+ /** SNO_or = HIZ */
+ MXC_E_AFE_SNO_OR_SEL_HIZ = 0,
+ /** SNO_or = SNO0 */
+ MXC_E_AFE_SNO_OR_SEL_SNO0,
+ /** SNO_or = SNO1 */
+ MXC_E_AFE_SNO_OR_SEL_SNO1,
+ /** SNO_or = SNO2 */
+ MXC_E_AFE_SNO_OR_SEL_SNO2,
+ /** SNO_or = SNO3 */
+ MXC_E_AFE_SNO_OR_SEL_SNO3
+} mxc_afe_sno_or_sel_t;
+
+/**
+ * @brief Selection for MUX DACx_sel.
+ */
+typedef enum {
+ /** dacx = DACOP */
+ MXC_E_AFE_DACX_SEL_P = 0,
+ /** dacx = DACON */
+ MXC_E_AFE_DACX_SEL_N
+} mxc_afe_dacx_sel_t;
+
+/**
+ * @brief Selection for state of Switch.
+ */
+typedef enum {
+ /** Switch is OPEN */
+ MXC_E_AFE_CLOSE_SPST_SWITCH_OPEN = 0,
+ /** Switch is CLOSED */
+ MXC_E_AFE_CLOSE_SPST_SWITCH_CLOSE
+} mxc_afe_close_spst_t;
+
+/**
+ * @brief Switch to Connect Positive Pad to GND.
+ */
+typedef enum {
+ /** Positive Pad GND Switch OPEN */
+ MXC_E_AFE_GND_SEL_OPAMP_SWITCH_OPEN = 0,
+ /** Positive Pad GND Switch CLOSED */
+ MXC_E_AFE_GND_SEL_OPAMP_SWITCH_CLOSED
+} mxc_afe_gnd_sel_opamp_t;
+
+/**
+ * @brief MUX Selection for OpPsel.
+ */
+typedef enum {
+ /** OpPsel = INx+ */
+ MXC_E_AFE_P_IN_SEL_OPAMP_INPLUS = 0,
+ /** OpPsel = DAC_or */
+ MXC_E_AFE_P_IN_SEL_OPAMP_DAC_OR,
+ /** OpPsel = SNO_or */
+ MXC_E_AFE_P_IN_SEL_OPAMP_SNO_OR,
+ /** OpPsel = DAC_or also output on INx+ */
+ MXC_E_AFE_P_IN_SEL_OPAMP_DAC_OR_AND_INPLUS
+} mxc_afe_p_in_sel_opamp_t;
+
+/**
+ * @brief MUX Selection for OpNsel.
+ */
+typedef enum {
+ /** OpNsel = INx- */
+ MXC_E_AFE_N_IN_SEL_OPAMP_INMINUS = 0,
+ /** OpNsel = OUTx */
+ MXC_E_AFE_N_IN_SEL_OPAMP_OUT,
+ /** OpNsel = SCM_or */
+ MXC_E_AFE_N_IN_SEL_OPAMP_SCM_OR,
+ /**OpNsel = SCM_or also output on INx- */
+ MXC_E_AFE_N_IN_SEL_OPAMP_SCM_OR_AND_INMINUS,
+} mxc_afe_n_in_sel_opamp_t;
+
+/**
+ * @brief MUX Selection for DAC_sel.
+ */
+typedef enum {
+ /** DAC_or = DAC0 */
+ MXC_E_AFE_DAC_SEL_DAC0 = 0,
+ /** DAC_or = DAC1 */
+ MXC_E_AFE_DAC_SEL_DAC1,
+ /** DAC_or = DAC2P */
+ MXC_E_AFE_DAC_SEL_DAC2P,
+ /** DAC_or = DAC3P */
+ MXC_E_AFE_DAC_SEL_DAC3P
+} mxc_afe_dac_sel_t;
+
+/**
+ * @brief MUX Selection for NPAD_sel.
+ */
+typedef enum {
+ /** NPAD_Sel = HIZ */
+ MXC_E_AFE_NPAD_SEL_HIZ = 0,
+ /** NPAD_Sel = LED Observe Port */
+ MXC_E_AFE_NPAD_SEL_LED_OBS_PORT,
+ /** NPAD_Sel = DAC_or */
+ MXC_E_AFE_NPAD_SEL_DAC_OR,
+ /** NPAD_Sel = DAC_or and LED Observe Port */
+ MXC_E_AFE_NPAD_SEL_DAC_OR_AND_LED_OBS_PORT
+} mxc_afe_npad_sel_t;
+
+/**
+ * @brief MUX Selection for CmpPSel.
+ */
+typedef enum {
+ /** CmpPSel = INx+ */
+ MXC_E_AFE_POS_IN_SEL_COMP_INPLUS = 0,
+ /** CmpPSel = SCM */
+ MXC_E_AFE_POS_IN_SEL_COMP_SCM,
+ /** CmpPSel = dac1 */
+ MXC_E_AFE_POS_IN_SEL_COMP_DAC1,
+ /** CmpPSel = DAC3P */
+ MXC_E_AFE_POS_IN_SEL_COMP_DAC3P,
+ /** CmpPSel = LED Observe Port */
+ MXC_E_AFE_POS_IN_SEL_COMP_LED_OBS_PORT,
+ /** CmpPSel = dac1 also output on INx+ */
+ MXC_E_AFE_POS_IN_SEL_COMP_DAC1_AND_INPLUS,
+ /** CmpPSel = DAC3P also output on INx+ */
+ MXC_E_AFE_POS_IN_SEL_COMP_DAC3P_AND_INPLUS,
+ /** CmpPSel = dac1 also output on SCM */
+ MXC_E_AFE_POS_IN_SEL_COMP_DAC1_AND_SCM
+} mxc_afe_pos_in_sel_comp_t;
+
+/**
+ * @brief MUX Selection for CmpNSel.
+ */
+typedef enum {
+ /** CmpNSel = INx- */
+ MXC_E_AFE_NEG_IN_SEL_COMP_INMINUS = 0,
+ /** CmpNSel = SNO */
+ MXC_E_AFE_NEG_IN_SEL_COMP_SNO,
+ /** CmpNSel = dac0 */
+ MXC_E_AFE_NEG_IN_SEL_COMP_DAC0,
+ /** CmpNSel = DAC2P */
+ MXC_E_AFE_NEG_IN_SEL_COMP_DAC2P,
+ /** CmpNSel = LED Observation Port */
+ MXC_E_AFE_NEG_IN_SEL_COMP_LED_OBS_PORT,
+ /** CmpNSel = dac0 also output on INx- */
+ MXC_E_AFE_NEG_IN_SEL_COMP_DAC0_AND_INMINUS,
+ /** CmpNSel = DAC2 also output on INx- */
+ MXC_E_AFE_NEG_IN_SEL_COMP_DAC2P_AND_INMINUS,
+ /** CmpNSel = DAC2 also output on SNO */
+ MXC_E_AFE_NEG_IN_SEL_COMP_DAC2P_AND_SNO
+} mxc_afe_neg_in_sel_comp_t;
+
+/* Offset Register Description
+ ====== ==================================================== */
+typedef struct {
+ __IO uint32_t intr; /* 0x0000 Analog Front End Interrupt Flags and Enable/Disable */
+ __IO uint32_t ctrl0; /* 0x0004 Analog Front End Control 0 */
+ __IO uint32_t ctrl1; /* 0x0008 Analog Front End Control 1 */
+ __IO uint32_t ctrl2; /* 0x000C Analog Front End Control 2 */
+ __IO uint32_t ctrl3; /* 0x0010 Analog Front End Control 3 */
+ __IO uint32_t ctrl4; /* 0x0014 Analog Front End Control 4 */
+ __IO uint32_t ctrl5; /* 0x0018 Analog Front End Control 5 */
+} mxc_afe_regs_t;
+
+/*
+ Register offsets for module AFE.
+*/
+#define MXC_R_AFE_OFFS_INTR ((uint32_t)0x00000000UL)
+#define MXC_R_AFE_OFFS_CTRL0 ((uint32_t)0x00000004UL)
+#define MXC_R_AFE_OFFS_CTRL1 ((uint32_t)0x00000008UL)
+#define MXC_R_AFE_OFFS_CTRL2 ((uint32_t)0x0000000CUL)
+#define MXC_R_AFE_OFFS_CTRL3 ((uint32_t)0x00000010UL)
+#define MXC_R_AFE_OFFS_CTRL4 ((uint32_t)0x00000014UL)
+#define MXC_R_AFE_OFFS_CTRL5 ((uint32_t)0x00000018UL)
+
+/*
+ Field positions and masks for module AFE.
+*/
+#define MXC_F_AFE_INTR_OP_COMP0_IF_POS 0
+#define MXC_F_AFE_INTR_OP_COMP0_IF ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_OP_COMP0_IF_POS))
+#define MXC_F_AFE_INTR_OP_COMP1_IF_POS 1
+#define MXC_F_AFE_INTR_OP_COMP1_IF ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_OP_COMP1_IF_POS))
+#define MXC_F_AFE_INTR_OP_COMP2_IF_POS 2
+#define MXC_F_AFE_INTR_OP_COMP2_IF ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_OP_COMP2_IF_POS))
+#define MXC_F_AFE_INTR_OP_COMP3_IF_POS 3
+#define MXC_F_AFE_INTR_OP_COMP3_IF ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_OP_COMP3_IF_POS))
+#define MXC_F_AFE_INTR_LP_COMP0_IF_POS 4
+#define MXC_F_AFE_INTR_LP_COMP0_IF ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_LP_COMP0_IF_POS))
+#define MXC_F_AFE_INTR_LP_COMP1_IF_POS 5
+#define MXC_F_AFE_INTR_LP_COMP1_IF ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_LP_COMP1_IF_POS))
+#define MXC_F_AFE_INTR_LP_COMP2_IF_POS 6
+#define MXC_F_AFE_INTR_LP_COMP2_IF ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_LP_COMP2_IF_POS))
+#define MXC_F_AFE_INTR_LP_COMP3_IF_POS 7
+#define MXC_F_AFE_INTR_LP_COMP3_IF ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_LP_COMP3_IF_POS))
+#define MXC_F_AFE_INTR_OP_COMP0_NMI_PMU_POS 8
+#define MXC_F_AFE_INTR_OP_COMP0_NMI_PMU ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_OP_COMP0_NMI_PMU_POS))
+#define MXC_F_AFE_INTR_OP_COMP1_NMI_PMU_POS 9
+#define MXC_F_AFE_INTR_OP_COMP1_NMI_PMU ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_OP_COMP1_NMI_PMU_POS))
+#define MXC_F_AFE_INTR_OP_COMP2_NMI_PMU_POS 10
+#define MXC_F_AFE_INTR_OP_COMP2_NMI_PMU ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_OP_COMP2_NMI_PMU_POS))
+#define MXC_F_AFE_INTR_OP_COMP3_NMI_PMU_POS 11
+#define MXC_F_AFE_INTR_OP_COMP3_NMI_PMU ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_OP_COMP3_NMI_PMU_POS))
+#define MXC_F_AFE_INTR_LP_COMP0_NMI_PMU_POS 12
+#define MXC_F_AFE_INTR_LP_COMP0_NMI_PMU ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_LP_COMP0_NMI_PMU_POS))
+#define MXC_F_AFE_INTR_LP_COMP1_NMI_PMU_POS 13
+#define MXC_F_AFE_INTR_LP_COMP1_NMI_PMU ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_LP_COMP1_NMI_PMU_POS))
+#define MXC_F_AFE_INTR_LP_COMP2_NMI_PMU_POS 14
+#define MXC_F_AFE_INTR_LP_COMP2_NMI_PMU ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_LP_COMP2_NMI_PMU_POS))
+#define MXC_F_AFE_INTR_LP_COMP3_NMI_PMU_POS 15
+#define MXC_F_AFE_INTR_LP_COMP3_NMI_PMU ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_LP_COMP3_NMI_PMU_POS))
+#define MXC_F_AFE_INTR_OP_COMP0_POL_POS 16
+#define MXC_F_AFE_INTR_OP_COMP0_POL ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_OP_COMP0_POL_POS))
+#define MXC_F_AFE_INTR_OP_COMP1_POL_POS 17
+#define MXC_F_AFE_INTR_OP_COMP1_POL ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_OP_COMP1_POL_POS))
+#define MXC_F_AFE_INTR_OP_COMP2_POL_POS 18
+#define MXC_F_AFE_INTR_OP_COMP2_POL ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_OP_COMP2_POL_POS))
+#define MXC_F_AFE_INTR_OP_COMP3_POL_POS 19
+#define MXC_F_AFE_INTR_OP_COMP3_POL ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_OP_COMP3_POL_POS))
+#define MXC_F_AFE_INTR_LP_COMP0_POL_POS 20
+#define MXC_F_AFE_INTR_LP_COMP0_POL ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_LP_COMP0_POL_POS))
+#define MXC_F_AFE_INTR_LP_COMP1_POL_POS 21
+#define MXC_F_AFE_INTR_LP_COMP1_POL ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_LP_COMP1_POL_POS))
+#define MXC_F_AFE_INTR_LP_COMP2_POL_POS 22
+#define MXC_F_AFE_INTR_LP_COMP2_POL ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_LP_COMP2_POL_POS))
+#define MXC_F_AFE_INTR_LP_COMP3_POL_POS 23
+#define MXC_F_AFE_INTR_LP_COMP3_POL ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_LP_COMP3_POL_POS))
+#define MXC_F_AFE_INTR_OP_COMP0_IE_POS 24
+#define MXC_F_AFE_INTR_OP_COMP0_IE ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_OP_COMP0_IE_POS))
+#define MXC_F_AFE_INTR_OP_COMP1_IE_POS 25
+#define MXC_F_AFE_INTR_OP_COMP1_IE ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_OP_COMP1_IE_POS))
+#define MXC_F_AFE_INTR_OP_COMP2_IE_POS 26
+#define MXC_F_AFE_INTR_OP_COMP2_IE ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_OP_COMP2_IE_POS))
+#define MXC_F_AFE_INTR_OP_COMP3_IE_POS 27
+#define MXC_F_AFE_INTR_OP_COMP3_IE ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_OP_COMP3_IE_POS))
+#define MXC_F_AFE_INTR_LP_COMP0_IE_POS 28
+#define MXC_F_AFE_INTR_LP_COMP0_IE ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_LP_COMP0_IE_POS))
+#define MXC_F_AFE_INTR_LP_COMP1_IE_POS 29
+#define MXC_F_AFE_INTR_LP_COMP1_IE ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_LP_COMP1_IE_POS))
+#define MXC_F_AFE_INTR_LP_COMP2_IE_POS 30
+#define MXC_F_AFE_INTR_LP_COMP2_IE ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_LP_COMP2_IE_POS))
+#define MXC_F_AFE_INTR_LP_COMP3_IE_POS 31
+#define MXC_F_AFE_INTR_LP_COMP3_IE ((uint32_t)(0x00000001UL << MXC_F_AFE_INTR_LP_COMP3_IE_POS))
+
+#define MXC_F_AFE_CTRL0_LED_CFG_POS 0
+#define MXC_F_AFE_CTRL0_LED_CFG ((uint32_t)(0x0000000FUL << MXC_F_AFE_CTRL0_LED_CFG_POS))
+#define MXC_F_AFE_CTRL0_CLEAR_WUD_COMP0_POS 4
+#define MXC_F_AFE_CTRL0_CLEAR_WUD_COMP0 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL0_CLEAR_WUD_COMP0_POS))
+#define MXC_F_AFE_CTRL0_CLEAR_WUD_COMP1_POS 5
+#define MXC_F_AFE_CTRL0_CLEAR_WUD_COMP1 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL0_CLEAR_WUD_COMP1_POS))
+#define MXC_F_AFE_CTRL0_CLEAR_WUD_COMP2_POS 6
+#define MXC_F_AFE_CTRL0_CLEAR_WUD_COMP2 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL0_CLEAR_WUD_COMP2_POS))
+#define MXC_F_AFE_CTRL0_CLEAR_WUD_COMP3_POS 7
+#define MXC_F_AFE_CTRL0_CLEAR_WUD_COMP3 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL0_CLEAR_WUD_COMP3_POS))
+#define MXC_F_AFE_CTRL0_EN_WUD_COMP0_POS 8
+#define MXC_F_AFE_CTRL0_EN_WUD_COMP0 ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL0_EN_WUD_COMP0_POS))
+#define MXC_F_AFE_CTRL0_EN_WUD_COMP1_POS 10
+#define MXC_F_AFE_CTRL0_EN_WUD_COMP1 ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL0_EN_WUD_COMP1_POS))
+#define MXC_F_AFE_CTRL0_EN_WUD_COMP2_POS 12
+#define MXC_F_AFE_CTRL0_EN_WUD_COMP2 ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL0_EN_WUD_COMP2_POS))
+#define MXC_F_AFE_CTRL0_EN_WUD_COMP3_POS 14
+#define MXC_F_AFE_CTRL0_EN_WUD_COMP3 ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL0_EN_WUD_COMP3_POS))
+#define MXC_F_AFE_CTRL0_IN_MODE_COMP0_POS 16
+#define MXC_F_AFE_CTRL0_IN_MODE_COMP0 ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL0_IN_MODE_COMP0_POS))
+#define MXC_F_AFE_CTRL0_IN_MODE_COMP1_POS 18
+#define MXC_F_AFE_CTRL0_IN_MODE_COMP1 ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL0_IN_MODE_COMP1_POS))
+#define MXC_F_AFE_CTRL0_IN_MODE_COMP2_POS 20
+#define MXC_F_AFE_CTRL0_IN_MODE_COMP2 ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL0_IN_MODE_COMP2_POS))
+#define MXC_F_AFE_CTRL0_IN_MODE_COMP3_POS 22
+#define MXC_F_AFE_CTRL0_IN_MODE_COMP3 ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL0_IN_MODE_COMP3_POS))
+#define MXC_F_AFE_CTRL0_BIAS_MODE_COMP0_POS 24
+#define MXC_F_AFE_CTRL0_BIAS_MODE_COMP0 ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL0_BIAS_MODE_COMP0_POS))
+#define MXC_F_AFE_CTRL0_BIAS_MODE_COMP1_POS 26
+#define MXC_F_AFE_CTRL0_BIAS_MODE_COMP1 ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL0_BIAS_MODE_COMP1_POS))
+#define MXC_F_AFE_CTRL0_BIAS_MODE_COMP2_POS 28
+#define MXC_F_AFE_CTRL0_BIAS_MODE_COMP2 ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL0_BIAS_MODE_COMP2_POS))
+#define MXC_F_AFE_CTRL0_BIAS_MODE_COMP3_POS 30
+#define MXC_F_AFE_CTRL0_BIAS_MODE_COMP3 ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL0_BIAS_MODE_COMP3_POS))
+
+#define MXC_F_AFE_CTRL1_TEMP_SENSE_CURRENT_EN_POS 0
+#define MXC_F_AFE_CTRL1_TEMP_SENSE_CURRENT_EN ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL1_TEMP_SENSE_CURRENT_EN_POS))
+#define MXC_F_AFE_CTRL1_TEMP_SENSE_CURRENT_SEL_POS 1
+#define MXC_F_AFE_CTRL1_TEMP_SENSE_CURRENT_SEL ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL1_TEMP_SENSE_CURRENT_SEL_POS))
+#define MXC_F_AFE_CTRL1_REF_DAC_FAST_PWRDN_EN_POS 3
+#define MXC_F_AFE_CTRL1_REF_DAC_FAST_PWRDN_EN ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL1_REF_DAC_FAST_PWRDN_EN_POS))
+#define MXC_F_AFE_CTRL1_REF_ADC_FAST_PWRDN_EN_POS 4
+#define MXC_F_AFE_CTRL1_REF_ADC_FAST_PWRDN_EN ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL1_REF_ADC_FAST_PWRDN_EN_POS))
+#define MXC_F_AFE_CTRL1_REF_BANDGAP_SEL_POS 5
+#define MXC_F_AFE_CTRL1_REF_BANDGAP_SEL ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL1_REF_BANDGAP_SEL_POS))
+#define MXC_F_AFE_CTRL1_REF_ADC_VOLT_SEL_POS 6
+#define MXC_F_AFE_CTRL1_REF_ADC_VOLT_SEL ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL1_REF_ADC_VOLT_SEL_POS))
+#define MXC_F_AFE_CTRL1_REF_DAC_VOLT_SEL_POS 8
+#define MXC_F_AFE_CTRL1_REF_DAC_VOLT_SEL ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL1_REF_DAC_VOLT_SEL_POS))
+#define MXC_F_AFE_CTRL1_REF_SEL_POS 10
+#define MXC_F_AFE_CTRL1_REF_SEL ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL1_REF_SEL_POS))
+#define MXC_F_AFE_CTRL1_REF_ADC_POWERUP_POS 11
+#define MXC_F_AFE_CTRL1_REF_ADC_POWERUP ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL1_REF_ADC_POWERUP_POS))
+#define MXC_F_AFE_CTRL1_REF_DAC_POWERUP_POS 12
+#define MXC_F_AFE_CTRL1_REF_DAC_POWERUP ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL1_REF_DAC_POWERUP_POS))
+#define MXC_F_AFE_CTRL1_REF_BLK_POWERUP_POS 13
+#define MXC_F_AFE_CTRL1_REF_BLK_POWERUP ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL1_REF_BLK_POWERUP_POS))
+#define MXC_F_AFE_CTRL1_REF_ADC_COMP_POS 14
+#define MXC_F_AFE_CTRL1_REF_ADC_COMP ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL1_REF_ADC_COMP_POS))
+#define MXC_F_AFE_CTRL1_REF_DAC_COMP_POS 15
+#define MXC_F_AFE_CTRL1_REF_DAC_COMP ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL1_REF_DAC_COMP_POS))
+#define MXC_F_AFE_CTRL1_REF_ADC_TEST_GAIN_POS 16
+#define MXC_F_AFE_CTRL1_REF_ADC_TEST_GAIN ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL1_REF_ADC_TEST_GAIN_POS))
+#define MXC_F_AFE_CTRL1_REF_DAC_TEST_GAIN_POS 18
+#define MXC_F_AFE_CTRL1_REF_DAC_TEST_GAIN ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL1_REF_DAC_TEST_GAIN_POS))
+#define MXC_F_AFE_CTRL1_ABUS_PAGE_2_0_POS 20
+#define MXC_F_AFE_CTRL1_ABUS_PAGE_2_0 ((uint32_t)(0x00000007UL << MXC_F_AFE_CTRL1_ABUS_PAGE_2_0_POS))
+#define MXC_F_AFE_CTRL1_PLL_TST_EN_POS 23
+#define MXC_F_AFE_CTRL1_PLL_TST_EN ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL1_PLL_TST_EN_POS))
+#define MXC_F_AFE_CTRL1_V1EXTADJ_POS 25
+#define MXC_F_AFE_CTRL1_V1EXTADJ ((uint32_t)(0x0000001FUL << MXC_F_AFE_CTRL1_V1EXTADJ_POS))
+#define MXC_F_AFE_CTRL1_TMON_CUR_SEL_POS 30
+#define MXC_F_AFE_CTRL1_TMON_CUR_SEL ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL1_TMON_CUR_SEL_POS))
+
+#define MXC_F_AFE_CTRL2_HYST_COMP0_POS 0
+#define MXC_F_AFE_CTRL2_HYST_COMP0 ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL2_HYST_COMP0_POS))
+#define MXC_F_AFE_CTRL2_HYST_COMP1_POS 2
+#define MXC_F_AFE_CTRL2_HYST_COMP1 ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL2_HYST_COMP1_POS))
+#define MXC_F_AFE_CTRL2_HYST_COMP2_POS 4
+#define MXC_F_AFE_CTRL2_HYST_COMP2 ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL2_HYST_COMP2_POS))
+#define MXC_F_AFE_CTRL2_HYST_COMP3_POS 6
+#define MXC_F_AFE_CTRL2_HYST_COMP3 ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL2_HYST_COMP3_POS))
+#define MXC_F_AFE_CTRL2_HY_POL_COMP0_POS 8
+#define MXC_F_AFE_CTRL2_HY_POL_COMP0 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL2_HY_POL_COMP0_POS))
+#define MXC_F_AFE_CTRL2_HY_POL_COMP1_POS 9
+#define MXC_F_AFE_CTRL2_HY_POL_COMP1 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL2_HY_POL_COMP1_POS))
+#define MXC_F_AFE_CTRL2_HY_POL_COMP2_POS 10
+#define MXC_F_AFE_CTRL2_HY_POL_COMP2 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL2_HY_POL_COMP2_POS))
+#define MXC_F_AFE_CTRL2_HY_POL_COMP3_POS 11
+#define MXC_F_AFE_CTRL2_HY_POL_COMP3 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL2_HY_POL_COMP3_POS))
+#define MXC_F_AFE_CTRL2_POWERUP_COMP0_POS 12
+#define MXC_F_AFE_CTRL2_POWERUP_COMP0 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL2_POWERUP_COMP0_POS))
+#define MXC_F_AFE_CTRL2_POWERUP_COMP1_POS 13
+#define MXC_F_AFE_CTRL2_POWERUP_COMP1 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL2_POWERUP_COMP1_POS))
+#define MXC_F_AFE_CTRL2_POWERUP_COMP2_POS 14
+#define MXC_F_AFE_CTRL2_POWERUP_COMP2 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL2_POWERUP_COMP2_POS))
+#define MXC_F_AFE_CTRL2_POWERUP_COMP3_POS 15
+#define MXC_F_AFE_CTRL2_POWERUP_COMP3 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL2_POWERUP_COMP3_POS))
+#define MXC_F_AFE_CTRL2_DACOUT_EN0_POS 16
+#define MXC_F_AFE_CTRL2_DACOUT_EN0 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL2_DACOUT_EN0_POS))
+#define MXC_F_AFE_CTRL2_DACOUT_EN1_POS 17
+#define MXC_F_AFE_CTRL2_DACOUT_EN1 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL2_DACOUT_EN1_POS))
+#define MXC_F_AFE_CTRL2_DACOUT_EN2_POS 18
+#define MXC_F_AFE_CTRL2_DACOUT_EN2 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL2_DACOUT_EN2_POS))
+#define MXC_F_AFE_CTRL2_DACOUT_EN3_POS 19
+#define MXC_F_AFE_CTRL2_DACOUT_EN3 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL2_DACOUT_EN3_POS))
+#define MXC_F_AFE_CTRL2_SCM_OR_SEL_POS 20
+#define MXC_F_AFE_CTRL2_SCM_OR_SEL ((uint32_t)(0x00000007UL << MXC_F_AFE_CTRL2_SCM_OR_SEL_POS))
+#define MXC_F_AFE_CTRL2_SNO_OR_SEL_POS 23
+#define MXC_F_AFE_CTRL2_SNO_OR_SEL ((uint32_t)(0x00000007UL << MXC_F_AFE_CTRL2_SNO_OR_SEL_POS))
+#define MXC_F_AFE_CTRL2_DAC0_SEL_POS 26
+#define MXC_F_AFE_CTRL2_DAC0_SEL ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL2_DAC0_SEL_POS))
+#define MXC_F_AFE_CTRL2_DAC1_SEL_POS 27
+#define MXC_F_AFE_CTRL2_DAC1_SEL ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL2_DAC1_SEL_POS))
+
+#define MXC_F_AFE_CTRL3_POWERUP_OPAMP0_POS 12
+#define MXC_F_AFE_CTRL3_POWERUP_OPAMP0 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL3_POWERUP_OPAMP0_POS))
+#define MXC_F_AFE_CTRL3_POWERUP_OPAMP1_POS 13
+#define MXC_F_AFE_CTRL3_POWERUP_OPAMP1 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL3_POWERUP_OPAMP1_POS))
+#define MXC_F_AFE_CTRL3_POWERUP_OPAMP2_POS 14
+#define MXC_F_AFE_CTRL3_POWERUP_OPAMP2 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL3_POWERUP_OPAMP2_POS))
+#define MXC_F_AFE_CTRL3_POWERUP_OPAMP3_POS 15
+#define MXC_F_AFE_CTRL3_POWERUP_OPAMP3 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL3_POWERUP_OPAMP3_POS))
+#define MXC_F_AFE_CTRL3_GND_SEL_OPAMP0_POS 16
+#define MXC_F_AFE_CTRL3_GND_SEL_OPAMP0 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL3_GND_SEL_OPAMP0_POS))
+#define MXC_F_AFE_CTRL3_GND_SEL_OPAMP1_POS 17
+#define MXC_F_AFE_CTRL3_GND_SEL_OPAMP1 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL3_GND_SEL_OPAMP1_POS))
+#define MXC_F_AFE_CTRL3_GND_SEL_OPAMP2_POS 18
+#define MXC_F_AFE_CTRL3_GND_SEL_OPAMP2 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL3_GND_SEL_OPAMP2_POS))
+#define MXC_F_AFE_CTRL3_GND_SEL_OPAMP3_POS 19
+#define MXC_F_AFE_CTRL3_GND_SEL_OPAMP3 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL3_GND_SEL_OPAMP3_POS))
+#define MXC_F_AFE_CTRL3_CLOSE_SPST0_POS 20
+#define MXC_F_AFE_CTRL3_CLOSE_SPST0 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL3_CLOSE_SPST0_POS))
+#define MXC_F_AFE_CTRL3_CLOSE_SPST1_POS 21
+#define MXC_F_AFE_CTRL3_CLOSE_SPST1 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL3_CLOSE_SPST1_POS))
+#define MXC_F_AFE_CTRL3_CLOSE_SPST2_POS 22
+#define MXC_F_AFE_CTRL3_CLOSE_SPST2 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL3_CLOSE_SPST2_POS))
+#define MXC_F_AFE_CTRL3_CLOSE_SPST3_POS 23
+#define MXC_F_AFE_CTRL3_CLOSE_SPST3 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL3_CLOSE_SPST3_POS))
+#define MXC_F_AFE_CTRL3_EN_PCH_OPAMP0_POS 24
+#define MXC_F_AFE_CTRL3_EN_PCH_OPAMP0 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL3_EN_PCH_OPAMP0_POS))
+#define MXC_F_AFE_CTRL3_EN_PCH_OPAMP1_POS 25
+#define MXC_F_AFE_CTRL3_EN_PCH_OPAMP1 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL3_EN_PCH_OPAMP1_POS))
+#define MXC_F_AFE_CTRL3_EN_PCH_OPAMP2_POS 26
+#define MXC_F_AFE_CTRL3_EN_PCH_OPAMP2 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL3_EN_PCH_OPAMP2_POS))
+#define MXC_F_AFE_CTRL3_EN_PCH_OPAMP3_POS 27
+#define MXC_F_AFE_CTRL3_EN_PCH_OPAMP3 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL3_EN_PCH_OPAMP3_POS))
+#define MXC_F_AFE_CTRL3_EN_NCH_OPAMP0_POS 28
+#define MXC_F_AFE_CTRL3_EN_NCH_OPAMP0 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL3_EN_NCH_OPAMP0_POS))
+#define MXC_F_AFE_CTRL3_EN_NCH_OPAMP1_POS 29
+#define MXC_F_AFE_CTRL3_EN_NCH_OPAMP1 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL3_EN_NCH_OPAMP1_POS))
+#define MXC_F_AFE_CTRL3_EN_NCH_OPAMP2_POS 30
+#define MXC_F_AFE_CTRL3_EN_NCH_OPAMP2 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL3_EN_NCH_OPAMP2_POS))
+#define MXC_F_AFE_CTRL3_EN_NCH_OPAMP3_POS 31
+#define MXC_F_AFE_CTRL3_EN_NCH_OPAMP3 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL3_EN_NCH_OPAMP3_POS))
+
+#define MXC_F_AFE_CTRL4_P_IN_SEL_OPAMP0_POS 0
+#define MXC_F_AFE_CTRL4_P_IN_SEL_OPAMP0 ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL4_P_IN_SEL_OPAMP0_POS))
+#define MXC_F_AFE_CTRL4_P_IN_SEL_OPAMP1_POS 2
+#define MXC_F_AFE_CTRL4_P_IN_SEL_OPAMP1 ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL4_P_IN_SEL_OPAMP1_POS))
+#define MXC_F_AFE_CTRL4_P_IN_SEL_OPAMP2_POS 4
+#define MXC_F_AFE_CTRL4_P_IN_SEL_OPAMP2 ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL4_P_IN_SEL_OPAMP2_POS))
+#define MXC_F_AFE_CTRL4_P_IN_SEL_OPAMP3_POS 6
+#define MXC_F_AFE_CTRL4_P_IN_SEL_OPAMP3 ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL4_P_IN_SEL_OPAMP3_POS))
+#define MXC_F_AFE_CTRL4_N_IN_SEL_OPAMP0_POS 8
+#define MXC_F_AFE_CTRL4_N_IN_SEL_OPAMP0 ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL4_N_IN_SEL_OPAMP0_POS))
+#define MXC_F_AFE_CTRL4_N_IN_SEL_OPAMP1_POS 10
+#define MXC_F_AFE_CTRL4_N_IN_SEL_OPAMP1 ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL4_N_IN_SEL_OPAMP1_POS))
+#define MXC_F_AFE_CTRL4_N_IN_SEL_OPAMP2_POS 12
+#define MXC_F_AFE_CTRL4_N_IN_SEL_OPAMP2 ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL4_N_IN_SEL_OPAMP2_POS))
+#define MXC_F_AFE_CTRL4_N_IN_SEL_OPAMP3_POS 14
+#define MXC_F_AFE_CTRL4_N_IN_SEL_OPAMP3 ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL4_N_IN_SEL_OPAMP3_POS))
+#define MXC_F_AFE_CTRL4_DAC_SEL_A_POS 16
+#define MXC_F_AFE_CTRL4_DAC_SEL_A ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL4_DAC_SEL_A_POS))
+#define MXC_F_AFE_CTRL4_DAC_SEL_B_POS 18
+#define MXC_F_AFE_CTRL4_DAC_SEL_B ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL4_DAC_SEL_B_POS))
+#define MXC_F_AFE_CTRL4_DAC_SEL_C_POS 20
+#define MXC_F_AFE_CTRL4_DAC_SEL_C ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL4_DAC_SEL_C_POS))
+#define MXC_F_AFE_CTRL4_DAC_SEL_D_POS 22
+#define MXC_F_AFE_CTRL4_DAC_SEL_D ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL4_DAC_SEL_D_POS))
+#define MXC_F_AFE_CTRL4_NPAD_SEL_A_POS 24
+#define MXC_F_AFE_CTRL4_NPAD_SEL_A ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL4_NPAD_SEL_A_POS))
+#define MXC_F_AFE_CTRL4_NPAD_SEL_B_POS 26
+#define MXC_F_AFE_CTRL4_NPAD_SEL_B ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL4_NPAD_SEL_B_POS))
+#define MXC_F_AFE_CTRL4_NPAD_SEL_C_POS 28
+#define MXC_F_AFE_CTRL4_NPAD_SEL_C ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL4_NPAD_SEL_C_POS))
+#define MXC_F_AFE_CTRL4_NPAD_SEL_D_POS 30
+#define MXC_F_AFE_CTRL4_NPAD_SEL_D ((uint32_t)(0x00000003UL << MXC_F_AFE_CTRL4_NPAD_SEL_D_POS))
+
+#define MXC_F_AFE_CTRL5_P_IN_SEL_LP_COMP0_POS 0
+#define MXC_F_AFE_CTRL5_P_IN_SEL_LP_COMP0 ((uint32_t)(0x00000007UL << MXC_F_AFE_CTRL5_P_IN_SEL_LP_COMP0_POS))
+#define MXC_F_AFE_CTRL5_P_IN_SEL_LP_COMP1_POS 3
+#define MXC_F_AFE_CTRL5_P_IN_SEL_LP_COMP1 ((uint32_t)(0x00000007UL << MXC_F_AFE_CTRL5_P_IN_SEL_LP_COMP1_POS))
+#define MXC_F_AFE_CTRL5_P_IN_SEL_LP_COMP2_POS 6
+#define MXC_F_AFE_CTRL5_P_IN_SEL_LP_COMP2 ((uint32_t)(0x00000007UL << MXC_F_AFE_CTRL5_P_IN_SEL_LP_COMP2_POS))
+#define MXC_F_AFE_CTRL5_P_IN_SEL_LP_COMP3_POS 9
+#define MXC_F_AFE_CTRL5_P_IN_SEL_LP_COMP3 ((uint32_t)(0x00000007UL << MXC_F_AFE_CTRL5_P_IN_SEL_LP_COMP3_POS))
+#define MXC_F_AFE_CTRL5_N_IN_SEL_LP_COMP0_POS 12
+#define MXC_F_AFE_CTRL5_N_IN_SEL_LP_COMP0 ((uint32_t)(0x00000007UL << MXC_F_AFE_CTRL5_N_IN_SEL_LP_COMP0_POS))
+#define MXC_F_AFE_CTRL5_N_IN_SEL_LP_COMP1_POS 15
+#define MXC_F_AFE_CTRL5_N_IN_SEL_LP_COMP1 ((uint32_t)(0x00000007UL << MXC_F_AFE_CTRL5_N_IN_SEL_LP_COMP1_POS))
+#define MXC_F_AFE_CTRL5_N_IN_SEL_LP_COMP2_POS 18
+#define MXC_F_AFE_CTRL5_N_IN_SEL_LP_COMP2 ((uint32_t)(0x00000007UL << MXC_F_AFE_CTRL5_N_IN_SEL_LP_COMP2_POS))
+#define MXC_F_AFE_CTRL5_N_IN_SEL_LP_COMP3_POS 21
+#define MXC_F_AFE_CTRL5_N_IN_SEL_LP_COMP3 ((uint32_t)(0x00000007UL << MXC_F_AFE_CTRL5_N_IN_SEL_LP_COMP3_POS))
+#define MXC_F_AFE_CTRL5_OP_CMP0_POS 24
+#define MXC_F_AFE_CTRL5_OP_CMP0 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL5_OP_CMP0_POS))
+#define MXC_F_AFE_CTRL5_OP_CMP1_POS 25
+#define MXC_F_AFE_CTRL5_OP_CMP1 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL5_OP_CMP1_POS))
+#define MXC_F_AFE_CTRL5_OP_CMP2_POS 26
+#define MXC_F_AFE_CTRL5_OP_CMP2 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL5_OP_CMP2_POS))
+#define MXC_F_AFE_CTRL5_OP_CMP3_POS 27
+#define MXC_F_AFE_CTRL5_OP_CMP3 ((uint32_t)(0x00000001UL << MXC_F_AFE_CTRL5_OP_CMP3_POS))
+
+#ifdef __cplusplus
+}
+#endif
+
+/**
+* @}
+*/
+
+#endif /* _MXC_AFE_REGS_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/clkman_regs.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,493 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef _MXC_CLKMAN_REGS_H_
+#define _MXC_CLKMAN_REGS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/**
+ * @file clkman_regs.h
+ * @addtogroup clkman CLKMAN
+ * @{
+ */
+
+/**
+ * @brief Defines clock input selections for the phase locked loop.
+ */
+typedef enum {
+ /** Input select for high frequency crystal oscillator */
+ MXC_E_CLKMAN_PLL_INPUT_SELECT_HFX = 0,
+ /** Input select for 24MHz ring oscillator */
+ MXC_E_CLKMAN_PLL_INPUT_SELECT_24MHZ_RO,
+} mxc_clkman_pll_input_select_t;
+
+/**
+ * @brief Defines clock input frequency for the phase locked loop.
+ */
+typedef enum {
+ /** Input frequency of 24MHz */
+ MXC_E_CLKMAN_PLL_DIVISOR_SELECT_24MHZ = 0,
+ /** Input frequency of 12MHz */
+ MXC_E_CLKMAN_PLL_DIVISOR_SELECT_12MHZ,
+ /** Input frequency of 8MHz */
+ MXC_E_CLKMAN_PLL_DIVISOR_SELECT_8MHZ,
+} mxc_clkman_pll_divisor_select_t;
+
+/**
+ * @brief Defines terminal count for PLL stable.
+ */
+typedef enum {
+ /** Clock stable after 2^8 = 256 clock cycles */
+ MXC_E_CLKMAN_STABILITY_COUNT_2_8_CLKS = 0,
+ /** Clock stable after 2^9 = 512 clock cycles */
+ MXC_E_CLKMAN_STABILITY_COUNT_2_9_CLKS,
+ /** Clock stable after 2^10 = 1024 clock cycles */
+ MXC_E_CLKMAN_STABILITY_COUNT_2_10_CLKS,
+ /** Clock stable after 2^11 = 2048 clock cycles */
+ MXC_E_CLKMAN_STABILITY_COUNT_2_11_CLKS,
+ /** Clock stable after 2^12 = 4096 clock cycles */
+ MXC_E_CLKMAN_STABILITY_COUNT_2_12_CLKS,
+ /** Clock stable after 2^13 = 8192 clock cycles */
+ MXC_E_CLKMAN_STABILITY_COUNT_2_13_CLKS,
+ /** Clock stable after 2^14 = 16384 clock cycles */
+ MXC_E_CLKMAN_STABILITY_COUNT_2_14_CLKS,
+ /** Clock stable after 2^15 = 32768 clock cycles */
+ MXC_E_CLKMAN_STABILITY_COUNT_2_15_CLKS,
+ /** Clock stable after 2^16 = 65536 clock cycles */
+ MXC_E_CLKMAN_STABILITY_COUNT_2_16_CLKS,
+ /** Clock stable after 2^17 = 131072 clock cycles */
+ MXC_E_CLKMAN_STABILITY_COUNT_2_17_CLKS,
+ /** Clock stable after 2^18 = 262144 clock cycles */
+ MXC_E_CLKMAN_STABILITY_COUNT_2_18_CLKS,
+ /** Clock stable after 2^19 = 524288 clock cycles */
+ MXC_E_CLKMAN_STABILITY_COUNT_2_19_CLKS,
+ /** Clock stable after 2^20 = 1048576 clock cycles */
+ MXC_E_CLKMAN_STABILITY_COUNT_2_20_CLKS,
+ /** Clock stable after 2^21 = 2097152 clock cycles */
+ MXC_E_CLKMAN_STABILITY_COUNT_2_21_CLKS,
+ /** Clock stable after 2^22 = 4194304 clock cycles */
+ MXC_E_CLKMAN_STABILITY_COUNT_2_22_CLKS,
+ /** Clock stable after 2^23 = 8388608 clock cycles */
+ MXC_E_CLKMAN_STABILITY_COUNT_2_23_CLKS
+} mxc_clkman_stability_count_t;
+
+/**
+ * @brief Defines clock source selections for system clock.
+ */
+typedef enum {
+ /** Clock select for 24MHz ring oscillator divided by 8 (3MHz) */
+ MXC_E_CLKMAN_SYSTEM_SOURCE_SELECT_24MHZ_RO_DIV_8 = 0,
+ /** Clock select for 24MHz ring oscillator */
+ MXC_E_CLKMAN_SYSTEM_SOURCE_SELECT_24MHZ_RO,
+ /** Clock select for high frequency crystal oscillator */
+ MXC_E_CLKMAN_SYSTEM_SOURCE_SELECT_HFX,
+ /** Clock select for 48MHz phase locked loop output divided by 2 (24MHz) */
+ MXC_E_CLKMAN_SYSTEM_SOURCE_SELECT_PLL_48MHZ_DIV_2
+} mxc_clkman_system_source_select_t;
+
+/**
+ * @brief Defines clock source selections for analog to digital converter clock.
+ */
+typedef enum {
+ /** Clock select for system clock frequency */
+ MXC_E_CLKMAN_ADC_SOURCE_SELECT_SYSTEM = 0,
+ /** Clock select for 8MHz phase locked loop output */
+ MXC_E_CLKMAN_ADC_SOURCE_SELECT_PLL_8MHZ,
+ /** Clock select for high frequency crystal oscillator */
+ MXC_E_CLKMAN_ADC_SOURCE_SELECT_HFX,
+ /** Clock select for 24MHz ring oscillator */
+ MXC_E_CLKMAN_ADC_SOURCE_SELECT_24MHZ_RO,
+} mxc_clkman_adc_source_select_t;
+
+/**
+ * @brief Defines clock source selections for watchdog timer clock.
+ */
+typedef enum {
+ /** Clock select for system clock frequency */
+ MXC_E_CLKMAN_WDT_SOURCE_SELECT_SYSTEM = 0,
+ /** Clock select for 8MHz phase locked loop output */
+ MXC_E_CLKMAN_WDT_SOURCE_SELECT_RTC,
+ /** Clock select for high frequency crystal oscillator */
+ MXC_E_CLKMAN_WDT_SOURCE_SELECT_24MHZ_RO,
+ /** Clock select for 24MHz ring oscillator */
+ MXC_E_CLKMAN_WDT_SOURCE_SELECT_NANO,
+} mxc_clkman_wdt_source_select_t;
+
+/**
+ * @brief Defines clock scales for various clocks.
+ */
+typedef enum {
+ /** Clock disabled */
+ MXC_E_CLKMAN_CLK_SCALE_DISABLED = 0,
+ /** Clock enabled */
+ MXC_E_CLKMAN_CLK_SCALE_ENABLED,
+ /** Clock scale for dividing by 2 */
+ MXC_E_CLKMAN_CLK_SCALE_DIV_2,
+ /** Clock scale for dividing by 4 */
+ MXC_E_CLKMAN_CLK_SCALE_DIV_4,
+ /** Clock scale for dividing by 8 */
+ MXC_E_CLKMAN_CLK_SCALE_DIV_8,
+ /** Clock scale for dividing by 16 */
+ MXC_E_CLKMAN_CLK_SCALE_DIV_16,
+ /** Clock scale for dividing by 32 */
+ MXC_E_CLKMAN_CLK_SCALE_DIV_32,
+ /** Clock scale for dividing by 64 */
+ MXC_E_CLKMAN_CLK_SCALE_DIV_64,
+ /** Clock scale for dividing by 128 */
+ MXC_E_CLKMAN_CLK_SCALE_DIV_128,
+ /** Clock scale for dividing by 256 */
+ MXC_E_CLKMAN_CLK_SCALE_DIV_256
+} mxc_clkman_clk_scale_t;
+
+/**
+ * @brief Defines Setting of the Clock Gates .
+ */
+typedef enum {
+ /** Clock Gater is Off */
+ MXC_E_CLKMAN_CLK_GATE_OFF = 0,
+ /** Clock Gater is Dynamic */
+ MXC_E_CLKMAN_CLK_GATE_DYNAMIC,
+ /** Clock Gater is On */
+ MXC_E_CLKMAN_CLK_GATE_ON
+} mxc_clkman_clk_gate_t;
+
+/* Offset Register Description
+ ====== ===================================================================== */
+typedef struct {
+ __IO uint32_t clk_config; /* 0x0000 System Clock Configuration */
+ __IO uint32_t clk_ctrl; /* 0x0004 System Clock Controls */
+ __IO uint32_t intfl; /* 0x0008 Interrupt Flags */
+ __IO uint32_t inten; /* 0x000C Interrupt Enable/Disable Controls */
+ __IO uint32_t trim_calc; /* 0x0010 Trim Calculation Controls */
+ __I uint32_t rsv0014[4]; /* 0x0014 */
+ __IO uint32_t i2c_timer_ctrl; /* 0x0024 I2C Timer Control */
+ __I uint32_t rsv0028[6]; /* 0x0028 */
+ __IO uint32_t clk_ctrl_0_system; /* 0x0040 Control Settings for CLK0 - System Clock */
+ __IO uint32_t clk_ctrl_1_gpio; /* 0x0044 Control Settings for CLK1 - GPIO Module Clock */
+ __IO uint32_t clk_ctrl_2_pt; /* 0x0048 Control Settings for CLK2 - Pulse Train Module Clock */
+ __IO uint32_t clk_ctrl_3_spi0; /* 0x004C Control Settings for CLK3 - SPI0 Master Clock */
+ __IO uint32_t clk_ctrl_4_spi1; /* 0x0050 Control Settings for CLK4 - SPI1 Master Clock */
+ __IO uint32_t clk_ctrl_5_spi2; /* 0x0054 Control Settings for CLK5 - SPI2 Master Clock */
+ __IO uint32_t clk_ctrl_6_i2cm; /* 0x0058 Control Settings for CLK6 - Clock for all I2C Masters */
+ __IO uint32_t clk_ctrl_7_i2cs; /* 0x005C Control Settings for CLK7 - I2C Slave Clock */
+ __IO uint32_t clk_ctrl_8_lcd_chpump; /* 0x0060 Control Settings for CLK8 - LCD Charge Pump Clock */
+ __IO uint32_t clk_ctrl_9_puf; /* 0x0064 Control Settings for CLK9 - PUF Clock */
+ __IO uint32_t clk_ctrl_10_prng; /* 0x0068 Control Settings for CLK10 - PRNG Clock */
+ __IO uint32_t clk_ctrl_11_wdt0; /* 0x006C Control Settings for CLK11 - Watchdog Timer 0 ScaledSysClk */
+ __IO uint32_t clk_ctrl_12_wdt1; /* 0x0070 Control Settings for CLK12 - Watchdog Timer 1 ScaledSysClk */
+ __IO uint32_t clk_ctrl_13_rtc_int_sync; /* 0x0074 Control Settings for CLK13 - RTC Interrupt Sync Clock */
+ __IO uint32_t clk_ctrl_14_dac0; /* 0x0078 Control Settings for CLK14 - 12-bit DAC 0 Clock */
+ __IO uint32_t clk_ctrl_15_dac1; /* 0x007C Control Settings for CLK15 - 12-bit DAC 1 Clock */
+ __IO uint32_t clk_ctrl_16_dac2; /* 0x0080 Control Settings for CLK16 - 8-bit DAC 0 Clock */
+ __IO uint32_t clk_ctrl_17_dac3; /* 0x0084 Control Settings for CLK17 - 8-bit DAC 1 Clock */
+ __I uint32_t rsv0088[30]; /* 0x0088 */
+ __IO uint32_t crypt_clk_ctrl_0_aes; /* 0x0100 Control Settings for Crypto Clock 0 - AES */
+ __IO uint32_t crypt_clk_ctrl_1_maa; /* 0x0104 Control Settings for Crypto Clock 1 - MAA */
+ __IO uint32_t crypt_clk_ctrl_2_prng; /* 0x0108 Control Settings for Crypto Clock 2 - PRNG */
+ __I uint32_t rsv010C[13]; /* 0x010C */
+ __IO uint32_t clk_gate_ctrl0; /* 0x0140 Dynamic Clock Gating Control Register 0 */
+ __IO uint32_t clk_gate_ctrl1; /* 0x0144 Dynamic Clock Gating Control Register 1 */
+ __IO uint32_t clk_gate_ctrl2; /* 0x0148 Dynamic Clock Gating Control Register 2 */
+} mxc_clkman_regs_t;
+
+/*
+ Register offsets for module CLKMAN.
+*/
+#define MXC_R_CLKMAN_OFFS_CLK_CONFIG ((uint32_t)0x00000000UL)
+#define MXC_R_CLKMAN_OFFS_CLK_CTRL ((uint32_t)0x00000004UL)
+#define MXC_R_CLKMAN_OFFS_INTFL ((uint32_t)0x00000008UL)
+#define MXC_R_CLKMAN_OFFS_INTEN ((uint32_t)0x0000000CUL)
+#define MXC_R_CLKMAN_OFFS_TRIM_CALC ((uint32_t)0x00000010UL)
+#define MXC_R_CLKMAN_OFFS_I2C_TIMER_CTRL ((uint32_t)0x00000024UL)
+#define MXC_R_CLKMAN_OFFS_CLK_CTRL_0_SYSTEM ((uint32_t)0x00000040UL)
+#define MXC_R_CLKMAN_OFFS_CLK_CTRL_1_GPIO ((uint32_t)0x00000044UL)
+#define MXC_R_CLKMAN_OFFS_CLK_CTRL_2_PT ((uint32_t)0x00000048UL)
+#define MXC_R_CLKMAN_OFFS_CLK_CTRL_3_SPI0 ((uint32_t)0x0000004CUL)
+#define MXC_R_CLKMAN_OFFS_CLK_CTRL_4_SPI1 ((uint32_t)0x00000050UL)
+#define MXC_R_CLKMAN_OFFS_CLK_CTRL_5_SPI2 ((uint32_t)0x00000054UL)
+#define MXC_R_CLKMAN_OFFS_CLK_CTRL_6_I2CM ((uint32_t)0x00000058UL)
+#define MXC_R_CLKMAN_OFFS_CLK_CTRL_7_I2CS ((uint32_t)0x0000005CUL)
+#define MXC_R_CLKMAN_OFFS_CLK_CTRL_8_LCD_CHPUMP ((uint32_t)0x00000060UL)
+#define MXC_R_CLKMAN_OFFS_CLK_CTRL_9_PUF ((uint32_t)0x00000064UL)
+#define MXC_R_CLKMAN_OFFS_CLK_CTRL_10_PRNG ((uint32_t)0x00000068UL)
+#define MXC_R_CLKMAN_OFFS_CLK_CTRL_11_WDT0 ((uint32_t)0x0000006CUL)
+#define MXC_R_CLKMAN_OFFS_CLK_CTRL_12_WDT1 ((uint32_t)0x00000070UL)
+#define MXC_R_CLKMAN_OFFS_CLK_CTRL_13_RTC_INT_SYNC ((uint32_t)0x00000074UL)
+#define MXC_R_CLKMAN_OFFS_CLK_CTRL_14_DAC0 ((uint32_t)0x00000078UL)
+#define MXC_R_CLKMAN_OFFS_CLK_CTRL_15_DAC1 ((uint32_t)0x0000007CUL)
+#define MXC_R_CLKMAN_OFFS_CLK_CTRL_16_DAC2 ((uint32_t)0x00000080UL)
+#define MXC_R_CLKMAN_OFFS_CLK_CTRL_17_DAC3 ((uint32_t)0x00000084UL)
+#define MXC_R_CLKMAN_OFFS_CRYPT_CLK_CTRL_0_AES ((uint32_t)0x00000100UL)
+#define MXC_R_CLKMAN_OFFS_CRYPT_CLK_CTRL_1_MAA ((uint32_t)0x00000104UL)
+#define MXC_R_CLKMAN_OFFS_CRYPT_CLK_CTRL_2_PRNG ((uint32_t)0x00000108UL)
+#define MXC_R_CLKMAN_OFFS_CLK_GATE_CTRL0 ((uint32_t)0x00000140UL)
+#define MXC_R_CLKMAN_OFFS_CLK_GATE_CTRL1 ((uint32_t)0x00000144UL)
+#define MXC_R_CLKMAN_OFFS_CLK_GATE_CTRL2 ((uint32_t)0x00000148UL)
+
+/*
+ Field positions and masks for module CLKMAN.
+*/
+#define MXC_F_CLKMAN_CLK_CONFIG_HFX_ENABLE_POS 0
+#define MXC_F_CLKMAN_CLK_CONFIG_HFX_ENABLE ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_CLK_CONFIG_HFX_ENABLE_POS))
+#define MXC_F_CLKMAN_CLK_CONFIG_HFX_BYPASS_POS 1
+#define MXC_F_CLKMAN_CLK_CONFIG_HFX_BYPASS ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_CLK_CONFIG_HFX_BYPASS_POS))
+#define MXC_F_CLKMAN_CLK_CONFIG_HFX_TEST_ENABLE_POS 2
+#define MXC_F_CLKMAN_CLK_CONFIG_HFX_TEST_ENABLE ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_CLK_CONFIG_HFX_TEST_ENABLE_POS))
+#define MXC_F_CLKMAN_CLK_CONFIG_HFX_GM_ADJUST_POS 4
+#define MXC_F_CLKMAN_CLK_CONFIG_HFX_GM_ADJUST ((uint32_t)(0x0000001FUL << MXC_F_CLKMAN_CLK_CONFIG_HFX_GM_ADJUST_POS))
+#define MXC_F_CLKMAN_CLK_CONFIG_HFX_DC_CONTROL_POS 9
+#define MXC_F_CLKMAN_CLK_CONFIG_HFX_DC_CONTROL ((uint32_t)(0x00000007UL << MXC_F_CLKMAN_CLK_CONFIG_HFX_DC_CONTROL_POS))
+#define MXC_F_CLKMAN_CLK_CONFIG_PLL_ENABLE_POS 12
+#define MXC_F_CLKMAN_CLK_CONFIG_PLL_ENABLE ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_CLK_CONFIG_PLL_ENABLE_POS))
+#define MXC_F_CLKMAN_CLK_CONFIG_PLL_RESET_N_POS 13
+#define MXC_F_CLKMAN_CLK_CONFIG_PLL_RESET_N ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_CLK_CONFIG_PLL_RESET_N_POS))
+#define MXC_F_CLKMAN_CLK_CONFIG_PLL_INPUT_SELECT_POS 14
+#define MXC_F_CLKMAN_CLK_CONFIG_PLL_INPUT_SELECT ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_CLK_CONFIG_PLL_INPUT_SELECT_POS))
+#define MXC_F_CLKMAN_CLK_CONFIG_PLL_DIVISOR_SELECT_POS 16
+#define MXC_F_CLKMAN_CLK_CONFIG_PLL_DIVISOR_SELECT ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_CONFIG_PLL_DIVISOR_SELECT_POS))
+#define MXC_F_CLKMAN_CLK_CONFIG_PLL_8MHZ_ENABLE_POS 18
+#define MXC_F_CLKMAN_CLK_CONFIG_PLL_8MHZ_ENABLE ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_CLK_CONFIG_PLL_8MHZ_ENABLE_POS))
+#define MXC_F_CLKMAN_CLK_CONFIG_PLL_BYPASS_POS 19
+#define MXC_F_CLKMAN_CLK_CONFIG_PLL_BYPASS ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_CLK_CONFIG_PLL_BYPASS_POS))
+#define MXC_F_CLKMAN_CLK_CONFIG_PLL_STABILITY_COUNT_POS 20
+#define MXC_F_CLKMAN_CLK_CONFIG_PLL_STABILITY_COUNT ((uint32_t)(0x0000000FUL << MXC_F_CLKMAN_CLK_CONFIG_PLL_STABILITY_COUNT_POS))
+#define MXC_F_CLKMAN_CLK_CONFIG_CRYPTO_ENABLE_POS 24
+#define MXC_F_CLKMAN_CLK_CONFIG_CRYPTO_ENABLE ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_CLK_CONFIG_CRYPTO_ENABLE_POS))
+#define MXC_F_CLKMAN_CLK_CONFIG_CRYPTO_RESET_N_POS 25
+#define MXC_F_CLKMAN_CLK_CONFIG_CRYPTO_RESET_N ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_CLK_CONFIG_CRYPTO_RESET_N_POS))
+#define MXC_F_CLKMAN_CLK_CONFIG_CRYPTO_STABILITY_COUNT_POS 28
+#define MXC_F_CLKMAN_CLK_CONFIG_CRYPTO_STABILITY_COUNT ((uint32_t)(0x0000000FUL << MXC_F_CLKMAN_CLK_CONFIG_CRYPTO_STABILITY_COUNT_POS))
+
+#define MXC_F_CLKMAN_CLK_CTRL_SYSTEM_SOURCE_SELECT_POS 1
+#define MXC_F_CLKMAN_CLK_CTRL_SYSTEM_SOURCE_SELECT ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_CTRL_SYSTEM_SOURCE_SELECT_POS))
+#define MXC_F_CLKMAN_CLK_CTRL_AUTO_CLK_DISABLE_POS 3
+#define MXC_F_CLKMAN_CLK_CTRL_AUTO_CLK_DISABLE ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_CLK_CTRL_AUTO_CLK_DISABLE_POS))
+#define MXC_F_CLKMAN_CLK_CTRL_USB_GATE_N_POS 4
+#define MXC_F_CLKMAN_CLK_CTRL_USB_GATE_N ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_CLK_CTRL_USB_GATE_N_POS))
+#define MXC_F_CLKMAN_CLK_CTRL_ADC_GATE_N_POS 8
+#define MXC_F_CLKMAN_CLK_CTRL_ADC_GATE_N ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_CLK_CTRL_ADC_GATE_N_POS))
+#define MXC_F_CLKMAN_CLK_CTRL_ADC_SOURCE_SELECT_POS 9
+#define MXC_F_CLKMAN_CLK_CTRL_ADC_SOURCE_SELECT ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_CTRL_ADC_SOURCE_SELECT_POS))
+#define MXC_F_CLKMAN_CLK_CTRL_CRYPTO_GATE_N_POS 12
+#define MXC_F_CLKMAN_CLK_CTRL_CRYPTO_GATE_N ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_CLK_CTRL_CRYPTO_GATE_N_POS))
+#define MXC_F_CLKMAN_CLK_CTRL_WATCHDOG0_GATE_N_POS 16
+#define MXC_F_CLKMAN_CLK_CTRL_WATCHDOG0_GATE_N ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_CLK_CTRL_WATCHDOG0_GATE_N_POS))
+#define MXC_F_CLKMAN_CLK_CTRL_WATCHDOG0_SOURCE_SELECT_POS 17
+#define MXC_F_CLKMAN_CLK_CTRL_WATCHDOG0_SOURCE_SELECT ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_CTRL_WATCHDOG0_SOURCE_SELECT_POS))
+#define MXC_F_CLKMAN_CLK_CTRL_WATCHDOG1_GATE_N_POS 20
+#define MXC_F_CLKMAN_CLK_CTRL_WATCHDOG1_GATE_N ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_CLK_CTRL_WATCHDOG1_GATE_N_POS))
+#define MXC_F_CLKMAN_CLK_CTRL_WATCHDOG1_SOURCE_SELECT_POS 21
+#define MXC_F_CLKMAN_CLK_CTRL_WATCHDOG1_SOURCE_SELECT ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_CTRL_WATCHDOG1_SOURCE_SELECT_POS))
+#define MXC_F_CLKMAN_CLK_CTRL_RTOS_MODE_POS 24
+#define MXC_F_CLKMAN_CLK_CTRL_RTOS_MODE ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_CLK_CTRL_RTOS_MODE_POS))
+
+#define MXC_F_CLKMAN_INTFL_RING_STABLE_POS 0
+#define MXC_F_CLKMAN_INTFL_RING_STABLE ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_INTFL_RING_STABLE_POS))
+#define MXC_F_CLKMAN_INTFL_PLL_STABLE_POS 1
+#define MXC_F_CLKMAN_INTFL_PLL_STABLE ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_INTFL_PLL_STABLE_POS))
+#define MXC_F_CLKMAN_INTFL_CRYPTO_STABLE_POS 2
+#define MXC_F_CLKMAN_INTFL_CRYPTO_STABLE ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_INTFL_CRYPTO_STABLE_POS))
+
+#define MXC_F_CLKMAN_INTEN_RING_STABLE_POS 0
+#define MXC_F_CLKMAN_INTEN_RING_STABLE ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_INTEN_RING_STABLE_POS))
+#define MXC_F_CLKMAN_INTEN_PLL_STABLE_POS 1
+#define MXC_F_CLKMAN_INTEN_PLL_STABLE ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_INTEN_PLL_STABLE_POS))
+#define MXC_F_CLKMAN_INTEN_CRYPTO_STABLE_POS 2
+#define MXC_F_CLKMAN_INTEN_CRYPTO_STABLE ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_INTEN_CRYPTO_STABLE_POS))
+
+#define MXC_F_CLKMAN_TRIM_CALC_TRIM_CLK_SEL_POS 0
+#define MXC_F_CLKMAN_TRIM_CALC_TRIM_CLK_SEL ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_TRIM_CALC_TRIM_CLK_SEL_POS))
+#define MXC_F_CLKMAN_TRIM_CALC_TRIM_CALC_START_POS 1
+#define MXC_F_CLKMAN_TRIM_CALC_TRIM_CALC_START ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_TRIM_CALC_TRIM_CALC_START_POS))
+#define MXC_F_CLKMAN_TRIM_CALC_TRIM_CALC_COMPLETED_POS 2
+#define MXC_F_CLKMAN_TRIM_CALC_TRIM_CALC_COMPLETED ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_TRIM_CALC_TRIM_CALC_COMPLETED_POS))
+#define MXC_F_CLKMAN_TRIM_CALC_TRIM_ENABLE_POS 3
+#define MXC_F_CLKMAN_TRIM_CALC_TRIM_ENABLE ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_TRIM_CALC_TRIM_ENABLE_POS))
+#define MXC_F_CLKMAN_TRIM_CALC_TRIM_CALC_RESULTS_POS 16
+#define MXC_F_CLKMAN_TRIM_CALC_TRIM_CALC_RESULTS ((uint32_t)(0x000003FFUL << MXC_F_CLKMAN_TRIM_CALC_TRIM_CALC_RESULTS_POS))
+
+#define MXC_F_CLKMAN_I2C_TIMER_CTRL_I2C_1MS_TIMER_EN_POS 0
+#define MXC_F_CLKMAN_I2C_TIMER_CTRL_I2C_1MS_TIMER_EN ((uint32_t)(0x00000001UL << MXC_F_CLKMAN_I2C_TIMER_CTRL_I2C_1MS_TIMER_EN_POS))
+
+#define MXC_F_CLKMAN_CLK_CTRL_0_SYSTEM_SYS_CLK_SCALE_POS 0
+#define MXC_F_CLKMAN_CLK_CTRL_0_SYSTEM_SYS_CLK_SCALE ((uint32_t)(0x0000000FUL << MXC_F_CLKMAN_CLK_CTRL_0_SYSTEM_SYS_CLK_SCALE_POS))
+
+#define MXC_F_CLKMAN_CLK_CTRL_1_GPIO_GPIO_CLK_SCALE_POS 0
+#define MXC_F_CLKMAN_CLK_CTRL_1_GPIO_GPIO_CLK_SCALE ((uint32_t)(0x0000000FUL << MXC_F_CLKMAN_CLK_CTRL_1_GPIO_GPIO_CLK_SCALE_POS))
+
+#define MXC_F_CLKMAN_CLK_CTRL_2_PT_PULSE_TRAIN_CLK_SCALE_POS 0
+#define MXC_F_CLKMAN_CLK_CTRL_2_PT_PULSE_TRAIN_CLK_SCALE ((uint32_t)(0x0000000FUL << MXC_F_CLKMAN_CLK_CTRL_2_PT_PULSE_TRAIN_CLK_SCALE_POS))
+
+#define MXC_F_CLKMAN_CLK_CTRL_3_SPI0_SPI0_CLK_SCALE_POS 0
+#define MXC_F_CLKMAN_CLK_CTRL_3_SPI0_SPI0_CLK_SCALE ((uint32_t)(0x0000000FUL << MXC_F_CLKMAN_CLK_CTRL_3_SPI0_SPI0_CLK_SCALE_POS))
+
+#define MXC_F_CLKMAN_CLK_CTRL_4_SPI1_SPI1_CLK_SCALE_POS 0
+#define MXC_F_CLKMAN_CLK_CTRL_4_SPI1_SPI1_CLK_SCALE ((uint32_t)(0x0000000FUL << MXC_F_CLKMAN_CLK_CTRL_4_SPI1_SPI1_CLK_SCALE_POS))
+
+#define MXC_F_CLKMAN_CLK_CTRL_5_SPI2_SPI2_CLK_SCALE_POS 0
+#define MXC_F_CLKMAN_CLK_CTRL_5_SPI2_SPI2_CLK_SCALE ((uint32_t)(0x0000000FUL << MXC_F_CLKMAN_CLK_CTRL_5_SPI2_SPI2_CLK_SCALE_POS))
+
+#define MXC_F_CLKMAN_CLK_CTRL_6_I2CM_I2CM_CLK_SCALE_POS 0
+#define MXC_F_CLKMAN_CLK_CTRL_6_I2CM_I2CM_CLK_SCALE ((uint32_t)(0x0000000FUL << MXC_F_CLKMAN_CLK_CTRL_6_I2CM_I2CM_CLK_SCALE_POS))
+
+#define MXC_F_CLKMAN_CLK_CTRL_7_I2CS_I2CS_CLK_SCALE_POS 0
+#define MXC_F_CLKMAN_CLK_CTRL_7_I2CS_I2CS_CLK_SCALE ((uint32_t)(0x0000000FUL << MXC_F_CLKMAN_CLK_CTRL_7_I2CS_I2CS_CLK_SCALE_POS))
+
+#define MXC_F_CLKMAN_CLK_CTRL_8_LCD_CHPUMP_LCD_CLK_SCALE_POS 0
+#define MXC_F_CLKMAN_CLK_CTRL_8_LCD_CHPUMP_LCD_CLK_SCALE ((uint32_t)(0x0000000FUL << MXC_F_CLKMAN_CLK_CTRL_8_LCD_CHPUMP_LCD_CLK_SCALE_POS))
+
+#define MXC_F_CLKMAN_CLK_CTRL_9_PUF_PUF_CLK_SCALE_POS 0
+#define MXC_F_CLKMAN_CLK_CTRL_9_PUF_PUF_CLK_SCALE ((uint32_t)(0x0000000FUL << MXC_F_CLKMAN_CLK_CTRL_9_PUF_PUF_CLK_SCALE_POS))
+
+#define MXC_F_CLKMAN_CLK_CTRL_10_PRNG_PRNG_CLK_SCALE_POS 0
+#define MXC_F_CLKMAN_CLK_CTRL_10_PRNG_PRNG_CLK_SCALE ((uint32_t)(0x0000000FUL << MXC_F_CLKMAN_CLK_CTRL_10_PRNG_PRNG_CLK_SCALE_POS))
+
+#define MXC_F_CLKMAN_CLK_CTRL_11_WDT0_WATCHDOG0_CLK_SCALE_POS 0
+#define MXC_F_CLKMAN_CLK_CTRL_11_WDT0_WATCHDOG0_CLK_SCALE ((uint32_t)(0x0000000FUL << MXC_F_CLKMAN_CLK_CTRL_11_WDT0_WATCHDOG0_CLK_SCALE_POS))
+
+#define MXC_F_CLKMAN_CLK_CTRL_12_WDT1_WATCHDOG1_CLK_SCALE_POS 0
+#define MXC_F_CLKMAN_CLK_CTRL_12_WDT1_WATCHDOG1_CLK_SCALE ((uint32_t)(0x0000000FUL << MXC_F_CLKMAN_CLK_CTRL_12_WDT1_WATCHDOG1_CLK_SCALE_POS))
+
+#define MXC_F_CLKMAN_CLK_CTRL_13_RTC_INT_SYNC_RTC_CLK_SCALE_POS 0
+#define MXC_F_CLKMAN_CLK_CTRL_13_RTC_INT_SYNC_RTC_CLK_SCALE ((uint32_t)(0x0000000FUL << MXC_F_CLKMAN_CLK_CTRL_13_RTC_INT_SYNC_RTC_CLK_SCALE_POS))
+
+#define MXC_F_CLKMAN_CLK_CTRL_14_DAC0_DAC0_CLK_SCALE_POS 0
+#define MXC_F_CLKMAN_CLK_CTRL_14_DAC0_DAC0_CLK_SCALE ((uint32_t)(0x0000000FUL << MXC_F_CLKMAN_CLK_CTRL_14_DAC0_DAC0_CLK_SCALE_POS))
+
+#define MXC_F_CLKMAN_CLK_CTRL_15_DAC1_DAC1_CLK_SCALE_POS 0
+#define MXC_F_CLKMAN_CLK_CTRL_15_DAC1_DAC1_CLK_SCALE ((uint32_t)(0x0000000FUL << MXC_F_CLKMAN_CLK_CTRL_15_DAC1_DAC1_CLK_SCALE_POS))
+
+#define MXC_F_CLKMAN_CLK_CTRL_16_DAC2_DAC2_CLK_SCALE_POS 0
+#define MXC_F_CLKMAN_CLK_CTRL_16_DAC2_DAC2_CLK_SCALE ((uint32_t)(0x0000000FUL << MXC_F_CLKMAN_CLK_CTRL_16_DAC2_DAC2_CLK_SCALE_POS))
+
+#define MXC_F_CLKMAN_CLK_CTRL_17_DAC3_DAC3_CLK_SCALE_POS 0
+#define MXC_F_CLKMAN_CLK_CTRL_17_DAC3_DAC3_CLK_SCALE ((uint32_t)(0x0000000FUL << MXC_F_CLKMAN_CLK_CTRL_17_DAC3_DAC3_CLK_SCALE_POS))
+
+#define MXC_F_CLKMAN_CRYPT_CLK_CTRL_0_AES_AES_CLK_SCALE_POS 0
+#define MXC_F_CLKMAN_CRYPT_CLK_CTRL_0_AES_AES_CLK_SCALE ((uint32_t)(0x0000000FUL << MXC_F_CLKMAN_CRYPT_CLK_CTRL_0_AES_AES_CLK_SCALE_POS))
+
+#define MXC_F_CLKMAN_CRYPT_CLK_CTRL_1_MAA_UMAA_CLK_SCALE_POS 0
+#define MXC_F_CLKMAN_CRYPT_CLK_CTRL_1_MAA_UMAA_CLK_SCALE ((uint32_t)(0x0000000FUL << MXC_F_CLKMAN_CRYPT_CLK_CTRL_1_MAA_UMAA_CLK_SCALE_POS))
+
+#define MXC_F_CLKMAN_CRYPT_CLK_CTRL_2_PRNG_PRNG_CLK_SCALE_POS 0
+#define MXC_F_CLKMAN_CRYPT_CLK_CTRL_2_PRNG_PRNG_CLK_SCALE ((uint32_t)(0x0000000FUL << MXC_F_CLKMAN_CRYPT_CLK_CTRL_2_PRNG_PRNG_CLK_SCALE_POS))
+
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_CM3_CLK_GATER_POS 0
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_CM3_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL0_CM3_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_SYSBUS_CLK_GATER_POS 2
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_SYSBUS_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL0_SYSBUS_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_ICACHE_CLK_GATER_POS 4
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_ICACHE_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL0_ICACHE_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_FLASH_CLK_GATER_POS 6
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_FLASH_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL0_FLASH_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_SRAM_CLK_GATER_POS 8
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_SRAM_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL0_SRAM_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_APB_BRIDGE_CLK_GATER_POS 10
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_APB_BRIDGE_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL0_APB_BRIDGE_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_SYSMAN_CLK_GATER_POS 12
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_SYSMAN_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL0_SYSMAN_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_UART0_CLK_GATER_POS 14
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_UART0_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL0_UART0_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_UART1_CLK_GATER_POS 16
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_UART1_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL0_UART1_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_TIMER0_CLK_GATER_POS 18
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_TIMER0_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL0_TIMER0_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_TIMER1_CLK_GATER_POS 20
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_TIMER1_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL0_TIMER1_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_TIMER2_CLK_GATER_POS 22
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_TIMER2_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL0_TIMER2_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_TIMER3_CLK_GATER_POS 24
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_TIMER3_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL0_TIMER3_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_WATCHDOG0_CLK_GATER_POS 26
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_WATCHDOG0_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL0_WATCHDOG0_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_WATCHDOG1_CLK_GATER_POS 28
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_WATCHDOG1_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL0_WATCHDOG1_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_USB_CLK_GATER_POS 30
+#define MXC_F_CLKMAN_CLK_GATE_CTRL0_USB_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL0_USB_CLK_GATER_POS))
+
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_TESTACC_CLK_GATER_POS 0
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_TESTACC_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL1_TESTACC_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_ADC_CLK_GATER_POS 2
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_ADC_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL1_ADC_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_DAC12_0_CLK_GATER_POS 4
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_DAC12_0_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL1_DAC12_0_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_DAC12_1_CLK_GATER_POS 6
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_DAC12_1_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL1_DAC12_1_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_DAC8_0_CLK_GATER_POS 8
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_DAC8_0_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL1_DAC8_0_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_DAC8_1_CLK_GATER_POS 10
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_DAC8_1_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL1_DAC8_1_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_PMU_CLK_GATER_POS 12
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_PMU_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL1_PMU_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_LCD_CLK_GATER_POS 14
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_LCD_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL1_LCD_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_GPIO_CLK_GATER_POS 16
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_GPIO_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL1_GPIO_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_PULSETRAIN_CLK_GATER_POS 18
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_PULSETRAIN_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL1_PULSETRAIN_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_SPI0_CLK_GATER_POS 20
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_SPI0_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL1_SPI0_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_SPI1_CLK_GATER_POS 22
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_SPI1_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL1_SPI1_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_SPI2_CLK_GATER_POS 24
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_SPI2_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL1_SPI2_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_I2CM0_CLK_GATER_POS 26
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_I2CM0_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL1_I2CM0_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_I2CM1_CLK_GATER_POS 28
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_I2CM1_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL1_I2CM1_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_I2CS_CLK_GATER_POS 30
+#define MXC_F_CLKMAN_CLK_GATE_CTRL1_I2CS_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL1_I2CS_CLK_GATER_POS))
+
+#define MXC_F_CLKMAN_CLK_GATE_CTRL2_CRC_CLK_GATER_POS 0
+#define MXC_F_CLKMAN_CLK_GATE_CTRL2_CRC_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL2_CRC_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL2_TPU_CLK_GATER_POS 2
+#define MXC_F_CLKMAN_CLK_GATE_CTRL2_TPU_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL2_TPU_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL2_SSBMUX_CLK_GATER_POS 4
+#define MXC_F_CLKMAN_CLK_GATE_CTRL2_SSBMUX_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL2_SSBMUX_CLK_GATER_POS))
+#define MXC_F_CLKMAN_CLK_GATE_CTRL2_PAD_CLK_GATER_POS 6
+#define MXC_F_CLKMAN_CLK_GATE_CTRL2_PAD_CLK_GATER ((uint32_t)(0x00000003UL << MXC_F_CLKMAN_CLK_GATE_CTRL2_PAD_CLK_GATER_POS))
+
+#ifdef __cplusplus
+}
+#endif
+
+/**
+* @}
+*/
+
+#endif /* _MXC_CLKMAN_REGS_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_MAX32600MBED/cmsis.h Tue Jun 09 14:29:26 2015 +0100 @@ -0,0 +1,40 @@ +/******************************************************************************* + * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included + * in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS + * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. + * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES + * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Except as contained in this notice, the name of Maxim Integrated + * Products, Inc. shall not be used except as stated in the Maxim Integrated + * Products, Inc. Branding Policy. + * + * The mere transfer of this software does not imply any licenses + * of trade secrets, proprietary technology, copyrights, patents, + * trademarks, maskwork rights, or any other form of intellectual + * property whatsoever. Maxim Integrated Products, Inc. retains all + * ownership rights. + ******************************************************************************* + */ + +#ifndef MBED_CMSIS_H +#define MBED_CMSIS_H + +#include "max32600.h" +#include "cmsis_nvic.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/cmsis_nvic.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,53 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+#include "cmsis.h"
+
+#define NVIC_NUM_VECTORS MXC_IRQ_COUNT
+#define NVIC_USER_IRQ_OFFSET 16
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
+uint32_t NVIC_GetVector(IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* MBED_CMSIS_NVIC_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/core_ca9.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,271 @@
+/**************************************************************************//**
+ * @file core_ca9.h
+ * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File
+ * @version
+ * @date 25 March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CA9_H_GENERIC
+#define __CORE_CA9_H_GENERIC
+
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_A9
+ @{
+ */
+
+/* CMSIS CA9 definitions */
+#define __CA9_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CA9_CMSIS_VERSION_SUB (0x10) /*!< [15:0] CMSIS HAL sub version */
+#define __CA9_CMSIS_VERSION ((__CA9_CMSIS_VERSION_MAIN << 16) | \
+ __CA9_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_A (0x09) /*!< Cortex-A Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /*!< standard types definitions */
+#include "core_caInstr.h" /*!< Core Instruction Access */
+#include "core_caFunc.h" /*!< Core Function Access */
+#include "core_cm4_simd.h" /*!< Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CA9_H_DEPENDANT
+#define __CORE_CA9_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CA9_REV
+ #define __CA9_REV 0x0000
+ #warning "__CA9_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 1
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 1
+ #endif
+
+ #if __Vendor_SysTickConfig == 0
+ #error "__Vendor_SysTickConfig set to 0, but vendor systick timer must be supplied for Cortex-A9"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_A9 */
+
+
+/*******************************************************************************
+ * Register Abstraction
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-A processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t reserved1:7; /*!< bit: 20..23 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/*@} end of group CMSIS_CORE */
+
+/*@} end of CMSIS_Core_FPUFunctions */
+
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/core_caFunc.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,1161 @@
+/**************************************************************************//**
+ * @file core_caFunc.h
+ * @brief CMSIS Cortex-A Core Function Access Header File
+ * @version V3.10
+ * @date 9 May 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CAFUNC_H__
+#define __CORE_CAFUNC_H__
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get CPSR Register
+
+ This function returns the content of the CPSR Register.
+
+ \return CPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_CPSR(void)
+{
+ register uint32_t __regCPSR __ASM("cpsr");
+ return(__regCPSR);
+}
+
+/** \brief Set Stack Pointer
+
+ This function assigns the given value to the current stack pointer.
+
+ \param [in] topOfStack Stack Pointer value to set
+ */
+register uint32_t __regSP __ASM("sp");
+__STATIC_INLINE void __set_SP(uint32_t topOfStack)
+{
+ __regSP = topOfStack;
+}
+
+
+/** \brief Get link register
+
+ This function returns the value of the link register
+
+ \return Value of link register
+ */
+register uint32_t __reglr __ASM("lr");
+__STATIC_INLINE uint32_t __get_LR(void)
+{
+ return(__reglr);
+}
+
+/** \brief Set link register
+
+ This function sets the value of the link register
+
+ \param [in] lr LR value to set
+ */
+__STATIC_INLINE void __set_LR(uint32_t lr)
+{
+ __reglr = lr;
+}
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_PSP(uint32_t topOfProcStack)
+{
+ ARM
+ PRESERVE8
+
+ BIC R0, R0, #7 ;ensure stack is 8-byte aligned
+ MRS R1, CPSR
+ CPS #MODE_SYS ;no effect in USR mode
+ MOV SP, R0
+ MSR CPSR_c, R1 ;no effect in USR mode
+ ISB
+ BX LR
+
+}
+
+/** \brief Set User Mode
+
+ This function changes the processor state to User Mode
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_CPS_USR(void)
+{
+ ARM
+
+ CPS #MODE_USR
+ BX LR
+}
+
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+/** \brief Get FPEXC
+
+ This function returns the current value of the Floating Point Exception Control register.
+
+ \return Floating Point Exception Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPEXC(void)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ return(__regfpexc);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPEXC
+
+ This function assigns the given value to the Floating Point Exception Control register.
+
+ \param [in] fpscr Floating Point Exception Control value to set
+ */
+__STATIC_INLINE void __set_FPEXC(uint32_t fpexc)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ __regfpexc = (fpexc);
+#endif
+}
+
+/** \brief Get CPACR
+
+ This function returns the current value of the Coprocessor Access Control register.
+
+ \return Coprocessor Access Control register value
+ */
+__STATIC_INLINE uint32_t __get_CPACR(void)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ return __regCPACR;
+}
+
+/** \brief Set CPACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] cpacr Coporcessor Acccess Control value to set
+ */
+__STATIC_INLINE void __set_CPACR(uint32_t cpacr)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ __regCPACR = cpacr;
+ __ISB();
+}
+
+/** \brief Get CBAR
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Configuration Base Address register value
+ */
+__STATIC_INLINE uint32_t __get_CBAR() {
+ register uint32_t __regCBAR __ASM("cp15:4:c15:c0:0");
+ return(__regCBAR);
+}
+
+/** \brief Get TTBR0
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Translation Table Base Register 0 value
+ */
+__STATIC_INLINE uint32_t __get_TTBR0() {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ return(__regTTBR0);
+}
+
+/** \brief Set TTBR0
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] ttbr0 Translation Table Base Register 0 value to set
+ */
+__STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ __regTTBR0 = ttbr0;
+ __ISB();
+}
+
+/** \brief Get DACR
+
+ This function returns the value of the Domain Access Control Register.
+
+ \return Domain Access Control Register value
+ */
+__STATIC_INLINE uint32_t __get_DACR() {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ return(__regDACR);
+}
+
+/** \brief Set DACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] dacr Domain Access Control Register value to set
+ */
+__STATIC_INLINE void __set_DACR(uint32_t dacr) {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ __regDACR = dacr;
+ __ISB();
+}
+
+/******************************** Cache and BTAC enable ****************************************************/
+
+/** \brief Set SCTLR
+
+ This function assigns the given value to the System Control Register.
+
+ \param [in] sctlr System Control Register, value to set
+ */
+__STATIC_INLINE void __set_SCTLR(uint32_t sctlr)
+{
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ __regSCTLR = sctlr;
+}
+
+/** \brief Get SCTLR
+
+ This function returns the value of the System Control Register.
+
+ \return System Control Register value
+ */
+__STATIC_INLINE uint32_t __get_SCTLR() {
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ return(__regSCTLR);
+}
+
+/** \brief Enable Caches
+
+ Enable Caches
+ */
+__STATIC_INLINE void __enable_caches(void) {
+ // Set I bit 12 to enable I Cache
+ // Set C bit 2 to enable D Cache
+ __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief Disable Caches
+
+ Disable Caches
+ */
+__STATIC_INLINE void __disable_caches(void) {
+ // Clear I bit 12 to disable I Cache
+ // Clear C bit 2 to disable D Cache
+ __set_SCTLR( __get_SCTLR() & ~(1 << 12) & ~(1 << 2));
+ __ISB();
+}
+
+/** \brief Enable BTAC
+
+ Enable BTAC
+ */
+__STATIC_INLINE void __enable_btac(void) {
+ // Set Z bit 11 to enable branch prediction
+ __set_SCTLR( __get_SCTLR() | (1 << 11));
+ __ISB();
+}
+
+/** \brief Disable BTAC
+
+ Disable BTAC
+ */
+__STATIC_INLINE void __disable_btac(void) {
+ // Clear Z bit 11 to disable branch prediction
+ __set_SCTLR( __get_SCTLR() & ~(1 << 11));
+}
+
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __enable_mmu(void) {
+ // Set M bit 0 to enable the MMU
+ // Set AFE bit to enable simplified access permissions model
+ // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+ __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+ __ISB();
+}
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __disable_mmu(void) {
+ // Clear M bit 0 to disable the MMU
+ __set_SCTLR( __get_SCTLR() & ~1);
+ __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief Invalidate the whole tlb
+
+ TLBIALL. Invalidate the whole tlb
+ */
+
+__STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+ register uint32_t __TLBIALL __ASM("cp15:0:c8:c7:0");
+ __TLBIALL = 0;
+ __DSB();
+ __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief Invalidate entire branch predictor array
+
+ BPIALL. Branch Predictor Invalidate All.
+ */
+
+__STATIC_INLINE void __v7_inv_btac(void) {
+ register uint32_t __BPIALL __ASM("cp15:0:c7:c5:6");
+ __BPIALL = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief Invalidate the whole I$
+
+ ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+__STATIC_INLINE void __v7_inv_icache_all(void) {
+ register uint32_t __ICIALLU __ASM("cp15:0:c7:c5:0");
+ __ICIALLU = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new I cache state
+}
+
+/** \brief Clean D$ by MVA
+
+ DCCMVAC. Data cache clean by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_dcache_mva(void *va) {
+ register uint32_t __DCCMVAC __ASM("cp15:0:c7:c10:1");
+ __DCCMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Invalidate D$ by MVA
+
+ DCIMVAC. Data cache invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_inv_dcache_mva(void *va) {
+ register uint32_t __DCIMVAC __ASM("cp15:0:c7:c6:1");
+ __DCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Clean and Invalidate D$ by MVA
+
+ DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+ register uint32_t __DCCIMVAC __ASM("cp15:0:c7:c14:1");
+ __DCCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief
+ * Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency.
+ */
+#pragma push
+#pragma arm
+__STATIC_ASM void __v7_all_cache(uint32_t op) {
+ ARM
+
+ PUSH {R4-R11}
+
+ MRC p15, 1, R6, c0, c0, 1 // Read CLIDR
+ ANDS R3, R6, #0x07000000 // Extract coherency level
+ MOV R3, R3, LSR #23 // Total cache levels << 1
+ BEQ Finished // If 0, no need to clean
+
+ MOV R10, #0 // R10 holds current cache level << 1
+Loop1 ADD R2, R10, R10, LSR #1 // R2 holds cache "Set" position
+ MOV R1, R6, LSR R2 // Bottom 3 bits are the Cache-type for this level
+ AND R1, R1, #7 // Isolate those lower 3 bits
+ CMP R1, #2
+ BLT Skip // No cache or only instruction cache at this level
+
+ MCR p15, 2, R10, c0, c0, 0 // Write the Cache Size selection register
+ ISB // ISB to sync the change to the CacheSizeID reg
+ MRC p15, 1, R1, c0, c0, 0 // Reads current Cache Size ID register
+ AND R2, R1, #7 // Extract the line length field
+ ADD R2, R2, #4 // Add 4 for the line length offset (log2 16 bytes)
+ LDR R4, =0x3FF
+ ANDS R4, R4, R1, LSR #3 // R4 is the max number on the way size (right aligned)
+ CLZ R5, R4 // R5 is the bit position of the way size increment
+ LDR R7, =0x7FFF
+ ANDS R7, R7, R1, LSR #13 // R7 is the max number of the index size (right aligned)
+
+Loop2 MOV R9, R4 // R9 working copy of the max way size (right aligned)
+
+Loop3 ORR R11, R10, R9, LSL R5 // Factor in the Way number and cache number into R11
+ ORR R11, R11, R7, LSL R2 // Factor in the Set number
+ CMP R0, #0
+ BNE Dccsw
+ MCR p15, 0, R11, c7, c6, 2 // DCISW. Invalidate by Set/Way
+ B cont
+Dccsw CMP R0, #1
+ BNE Dccisw
+ MCR p15, 0, R11, c7, c10, 2 // DCCSW. Clean by Set/Way
+ B cont
+Dccisw MCR p15, 0, R11, c7, c14, 2 // DCCISW, Clean and Invalidate by Set/Way
+cont SUBS R9, R9, #1 // Decrement the Way number
+ BGE Loop3
+ SUBS R7, R7, #1 // Decrement the Set number
+ BGE Loop2
+Skip ADD R10, R10, #2 // increment the cache number
+ CMP R3, R10
+ BGT Loop1
+
+Finished
+ DSB
+ POP {R4-R11}
+ BX lr
+
+}
+#pragma pop
+
+/** \brief __v7_all_cache - helper function
+
+ */
+
+/** \brief Invalidate the whole D$
+
+ DCISW. Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_inv_dcache_all(void) {
+ __v7_all_cache(0);
+}
+
+/** \brief Clean the whole D$
+
+ DCCSW. Clean by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_dcache_all(void) {
+ __v7_all_cache(1);
+}
+
+/** \brief Clean and invalidate the whole D$
+
+ DCCISW. Clean and Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_inv_dcache_all(void) {
+ __v7_all_cache(2);
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__ICCARM__)) /*---------------- ICC Compiler ---------------------*/
+
+#error IAR Compiler support not implemented for Cortex-A
+
+#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
+
+/* GNU gcc specific functions */
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i");
+}
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __disable_irq(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("mrs %0, cpsr" : "=r" (result));
+ __ASM volatile ("cpsid i");
+ return(result & 0x80);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+#if 1
+ uint32_t result;
+
+ __ASM volatile ("mrs %0, apsr" : "=r" (result) );
+ return (result);
+#else
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+#endif
+}
+
+
+/** \brief Get CPSR Register
+
+ This function returns the content of the CPSR Register.
+
+ \return CPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CPSR(void)
+{
+#if 1
+ register uint32_t __regCPSR;
+ __ASM volatile ("mrs %0, cpsr" : "=r" (__regCPSR));
+#else
+ register uint32_t __regCPSR __ASM("cpsr");
+#endif
+ return(__regCPSR);
+}
+
+#if 0
+/** \brief Set Stack Pointer
+
+ This function assigns the given value to the current stack pointer.
+
+ \param [in] topOfStack Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_SP(uint32_t topOfStack)
+{
+ register uint32_t __regSP __ASM("sp");
+ __regSP = topOfStack;
+}
+#endif
+
+/** \brief Get link register
+
+ This function returns the value of the link register
+
+ \return Value of link register
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_LR(void)
+{
+ register uint32_t __reglr __ASM("lr");
+ return(__reglr);
+}
+
+#if 0
+/** \brief Set link register
+
+ This function sets the value of the link register
+
+ \param [in] lr LR value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_LR(uint32_t lr)
+{
+ register uint32_t __reglr __ASM("lr");
+ __reglr = lr;
+}
+#endif
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+extern void __set_PSP(uint32_t topOfProcStack);
+
+/** \brief Set User Mode
+
+ This function changes the processor state to User Mode
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+extern void __set_CPS_USR(void);
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+#if 1
+ uint32_t result;
+
+ __ASM volatile ("vmrs %0, fpscr" : "=r" (result) );
+ return (result);
+#else
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#endif
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+#if 1
+ __ASM volatile ("vmsr fpscr, %0" : : "r" (fpscr) );
+#else
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+#endif
+}
+
+/** \brief Get FPEXC
+
+ This function returns the current value of the Floating Point Exception Control register.
+
+ \return Floating Point Exception Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPEXC(void)
+{
+#if (__FPU_PRESENT == 1)
+#if 1
+ uint32_t result;
+
+ __ASM volatile ("vmrs %0, fpexc" : "=r" (result));
+ return (result);
+#else
+ register uint32_t __regfpexc __ASM("fpexc");
+ return(__regfpexc);
+#endif
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPEXC
+
+ This function assigns the given value to the Floating Point Exception Control register.
+
+ \param [in] fpscr Floating Point Exception Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPEXC(uint32_t fpexc)
+{
+#if (__FPU_PRESENT == 1)
+#if 1
+ __ASM volatile ("vmsr fpexc, %0" : : "r" (fpexc));
+#else
+ register uint32_t __regfpexc __ASM("fpexc");
+ __regfpexc = (fpexc);
+#endif
+#endif
+}
+
+/** \brief Get CPACR
+
+ This function returns the current value of the Coprocessor Access Control register.
+
+ \return Coprocessor Access Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CPACR(void)
+{
+#if 1
+ register uint32_t __regCPACR;
+ __ASM volatile ("mrc p15, 0, %0, c1, c0, 2" : "=r" (__regCPACR));
+#else
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+#endif
+ return __regCPACR;
+}
+
+/** \brief Set CPACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] cpacr Coporcessor Acccess Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CPACR(uint32_t cpacr)
+{
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c1, c0, 2" : : "r" (cpacr));
+#else
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ __regCPACR = cpacr;
+#endif
+ __ISB();
+}
+
+/** \brief Get CBAR
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Configuration Base Address register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CBAR() {
+#if 1
+ register uint32_t __regCBAR;
+ __ASM volatile ("mrc p15, 4, %0, c15, c0, 0" : "=r" (__regCBAR));
+#else
+ register uint32_t __regCBAR __ASM("cp15:4:c15:c0:0");
+#endif
+ return(__regCBAR);
+}
+
+/** \brief Get TTBR0
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Translation Table Base Register 0 value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_TTBR0() {
+#if 1
+ register uint32_t __regTTBR0;
+ __ASM volatile ("mrc p15, 0, %0, c2, c0, 0" : "=r" (__regTTBR0));
+#else
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+#endif
+ return(__regTTBR0);
+}
+
+/** \brief Set TTBR0
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] ttbr0 Translation Table Base Register 0 value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c2, c0, 0" : : "r" (ttbr0));
+#else
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ __regTTBR0 = ttbr0;
+#endif
+ __ISB();
+}
+
+/** \brief Get DACR
+
+ This function returns the value of the Domain Access Control Register.
+
+ \return Domain Access Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_DACR() {
+#if 1
+ register uint32_t __regDACR;
+ __ASM volatile ("mrc p15, 0, %0, c3, c0, 0" : "=r" (__regDACR));
+#else
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+#endif
+ return(__regDACR);
+}
+
+/** \brief Set DACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] dacr Domain Access Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_DACR(uint32_t dacr) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c3, c0, 0" : : "r" (dacr));
+#else
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ __regDACR = dacr;
+#endif
+ __ISB();
+}
+
+/******************************** Cache and BTAC enable ****************************************************/
+
+/** \brief Set SCTLR
+
+ This function assigns the given value to the System Control Register.
+
+ \param [in] sctlr System Control Register, value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_SCTLR(uint32_t sctlr)
+{
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c1, c0, 0" : : "r" (sctlr));
+#else
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ __regSCTLR = sctlr;
+#endif
+}
+
+/** \brief Get SCTLR
+
+ This function returns the value of the System Control Register.
+
+ \return System Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_SCTLR() {
+#if 1
+ register uint32_t __regSCTLR;
+ __ASM volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (__regSCTLR));
+#else
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+#endif
+ return(__regSCTLR);
+}
+
+/** \brief Enable Caches
+
+ Enable Caches
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_caches(void) {
+ // Set I bit 12 to enable I Cache
+ // Set C bit 2 to enable D Cache
+ __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief Disable Caches
+
+ Disable Caches
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_caches(void) {
+ // Clear I bit 12 to disable I Cache
+ // Clear C bit 2 to disable D Cache
+ __set_SCTLR( __get_SCTLR() & ~(1 << 12) & ~(1 << 2));
+ __ISB();
+}
+
+/** \brief Enable BTAC
+
+ Enable BTAC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_btac(void) {
+ // Set Z bit 11 to enable branch prediction
+ __set_SCTLR( __get_SCTLR() | (1 << 11));
+ __ISB();
+}
+
+/** \brief Disable BTAC
+
+ Disable BTAC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_btac(void) {
+ // Clear Z bit 11 to disable branch prediction
+ __set_SCTLR( __get_SCTLR() & ~(1 << 11));
+}
+
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_mmu(void) {
+ // Set M bit 0 to enable the MMU
+ // Set AFE bit to enable simplified access permissions model
+ // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+ __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+ __ISB();
+}
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_mmu(void) {
+ // Clear M bit 0 to disable the MMU
+ __set_SCTLR( __get_SCTLR() & ~1);
+ __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief Invalidate the whole tlb
+
+ TLBIALL. Invalidate the whole tlb
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c8, c7, 0" : : "r" (0));
+#else
+ register uint32_t __TLBIALL __ASM("cp15:0:c8:c7:0");
+ __TLBIALL = 0;
+#endif
+ __DSB();
+ __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief Invalidate entire branch predictor array
+
+ BPIALL. Branch Predictor Invalidate All.
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_btac(void) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c5, 6" : : "r" (0));
+#else
+ register uint32_t __BPIALL __ASM("cp15:0:c7:c5:6");
+ __BPIALL = 0;
+#endif
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief Invalidate the whole I$
+
+ ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_icache_all(void) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c5, 0" : : "r" (0));
+#else
+ register uint32_t __ICIALLU __ASM("cp15:0:c7:c5:0");
+ __ICIALLU = 0;
+#endif
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new I cache state
+}
+
+/** \brief Clean D$ by MVA
+
+ DCCMVAC. Data cache clean by MVA to PoC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_dcache_mva(void *va) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c10, 1" : : "r" ((uint32_t)va));
+#else
+ register uint32_t __DCCMVAC __ASM("cp15:0:c7:c10:1");
+ __DCCMVAC = (uint32_t)va;
+#endif
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Invalidate D$ by MVA
+
+ DCIMVAC. Data cache invalidate by MVA to PoC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_dcache_mva(void *va) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c6, 1" : : "r" ((uint32_t)va));
+#else
+ register uint32_t __DCIMVAC __ASM("cp15:0:c7:c6:1");
+ __DCIMVAC = (uint32_t)va;
+#endif
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Clean and Invalidate D$ by MVA
+
+ DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c14, 1" : : "r" ((uint32_t)va));
+#else
+ register uint32_t __DCCIMVAC __ASM("cp15:0:c7:c14:1");
+ __DCCIMVAC = (uint32_t)va;
+#endif
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief
+ * Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency.
+ */
+
+/** \brief __v7_all_cache - helper function
+
+ */
+
+extern void __v7_all_cache(uint32_t op);
+
+
+/** \brief Invalidate the whole D$
+
+ DCISW. Invalidate by Set/Way
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_dcache_all(void) {
+ __v7_all_cache(0);
+}
+
+/** \brief Clean the whole D$
+
+ DCCSW. Clean by Set/Way
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_dcache_all(void) {
+ __v7_all_cache(1);
+}
+
+/** \brief Clean and invalidate the whole D$
+
+ DCCISW. Clean and Invalidate by Set/Way
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_inv_dcache_all(void) {
+ __v7_all_cache(2);
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__TASKING__)) /*--------------- TASKING Compiler -----------------*/
+
+#error TASKING Compiler support not implemented for Cortex-A
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CAFUNC_H__ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_MAX32600MBED/core_caInstr.h Tue Jun 09 14:29:26 2015 +0100 @@ -0,0 +1,45 @@ +/**************************************************************************//** + * @file core_caInstr.h + * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File + * @version + * @date 04. December 2012 + * + * @note + * + ******************************************************************************/ +/* Copyright (c) 2009 - 2012 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + +#ifndef __CORE_CAINSTR_H__ +#define __CORE_CAINSTR_H__ + +#define __CORTEX_M 0x3 +#include "core_cmInstr.h" +#undef __CORTEX_M + +#endif +
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/core_ca_mmu.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,848 @@
+;/**************************************************************************//**
+; * @file core_ca_mmu.h
+; * @brief MMU Startup File for
+; * VE_A9_MP Device Series
+; * @version V1.01
+; * @date 25 March 2013
+; *
+; * @note
+; *
+; ******************************************************************************/
+;/* Copyright (c) 2012 ARM LIMITED
+;
+; All rights reserved.
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+; - Redistributions of source code must retain the above copyright
+; notice, this list of conditions and the following disclaimer.
+; - Redistributions in binary form must reproduce the above copyright
+; notice, this list of conditions and the following disclaimer in the
+; documentation and/or other materials provided with the distribution.
+; - Neither the name of ARM nor the names of its contributors may be used
+; to endorse or promote products derived from this software without
+; specific prior written permission.
+; *
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+; ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+; LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+; CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+; SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+; INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+; CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+; ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+; POSSIBILITY OF SUCH DAMAGE.
+; ---------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef _MMU_FUNC_H
+#define _MMU_FUNC_H
+
+#define SECTION_DESCRIPTOR (0x2)
+#define SECTION_MASK (0xFFFFFFFC)
+
+#define SECTION_TEXCB_MASK (0xFFFF8FF3)
+#define SECTION_B_SHIFT (2)
+#define SECTION_C_SHIFT (3)
+#define SECTION_TEX0_SHIFT (12)
+#define SECTION_TEX1_SHIFT (13)
+#define SECTION_TEX2_SHIFT (14)
+
+#define SECTION_XN_MASK (0xFFFFFFEF)
+#define SECTION_XN_SHIFT (4)
+
+#define SECTION_DOMAIN_MASK (0xFFFFFE1F)
+#define SECTION_DOMAIN_SHIFT (5)
+
+#define SECTION_P_MASK (0xFFFFFDFF)
+#define SECTION_P_SHIFT (9)
+
+#define SECTION_AP_MASK (0xFFFF73FF)
+#define SECTION_AP_SHIFT (10)
+#define SECTION_AP2_SHIFT (15)
+
+#define SECTION_S_MASK (0xFFFEFFFF)
+#define SECTION_S_SHIFT (16)
+
+#define SECTION_NG_MASK (0xFFFDFFFF)
+#define SECTION_NG_SHIFT (17)
+
+#define SECTION_NS_MASK (0xFFF7FFFF)
+#define SECTION_NS_SHIFT (19)
+
+
+#define PAGE_L1_DESCRIPTOR (0x1)
+#define PAGE_L1_MASK (0xFFFFFFFC)
+
+#define PAGE_L2_4K_DESC (0x2)
+#define PAGE_L2_4K_MASK (0xFFFFFFFD)
+
+#define PAGE_L2_64K_DESC (0x1)
+#define PAGE_L2_64K_MASK (0xFFFFFFFC)
+
+#define PAGE_4K_TEXCB_MASK (0xFFFFFE33)
+#define PAGE_4K_B_SHIFT (2)
+#define PAGE_4K_C_SHIFT (3)
+#define PAGE_4K_TEX0_SHIFT (6)
+#define PAGE_4K_TEX1_SHIFT (7)
+#define PAGE_4K_TEX2_SHIFT (8)
+
+#define PAGE_64K_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_64K_B_SHIFT (2)
+#define PAGE_64K_C_SHIFT (3)
+#define PAGE_64K_TEX0_SHIFT (12)
+#define PAGE_64K_TEX1_SHIFT (13)
+#define PAGE_64K_TEX2_SHIFT (14)
+
+#define PAGE_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_B_SHIFT (2)
+#define PAGE_C_SHIFT (3)
+#define PAGE_TEX_SHIFT (12)
+
+#define PAGE_XN_4K_MASK (0xFFFFFFFE)
+#define PAGE_XN_4K_SHIFT (0)
+#define PAGE_XN_64K_MASK (0xFFFF7FFF)
+#define PAGE_XN_64K_SHIFT (15)
+
+
+#define PAGE_DOMAIN_MASK (0xFFFFFE1F)
+#define PAGE_DOMAIN_SHIFT (5)
+
+#define PAGE_P_MASK (0xFFFFFDFF)
+#define PAGE_P_SHIFT (9)
+
+#define PAGE_AP_MASK (0xFFFFFDCF)
+#define PAGE_AP_SHIFT (4)
+#define PAGE_AP2_SHIFT (9)
+
+#define PAGE_S_MASK (0xFFFFFBFF)
+#define PAGE_S_SHIFT (10)
+
+#define PAGE_NG_MASK (0xFFFFF7FF)
+#define PAGE_NG_SHIFT (11)
+
+#define PAGE_NS_MASK (0xFFFFFFF7)
+#define PAGE_NS_SHIFT (3)
+
+#define OFFSET_1M (0x00100000)
+#define OFFSET_64K (0x00010000)
+#define OFFSET_4K (0x00001000)
+
+#define DESCRIPTOR_FAULT (0x00000000)
+
+/* ########################### MMU Function Access ########################### */
+/** \ingroup MMU_FunctionInterface
+ \defgroup MMU_Functions MMU Functions Interface
+ @{
+ */
+
+/* Attributes enumerations */
+
+/* Region size attributes */
+typedef enum
+{
+ SECTION,
+ PAGE_4k,
+ PAGE_64k,
+} mmu_region_size_Type;
+
+/* Region type attributes */
+typedef enum
+{
+ NORMAL,
+ DEVICE,
+ SHARED_DEVICE,
+ NON_SHARED_DEVICE,
+ STRONGLY_ORDERED
+} mmu_memory_Type;
+
+/* Region cacheability attributes */
+typedef enum
+{
+ NON_CACHEABLE,
+ WB_WA,
+ WT,
+ WB_NO_WA,
+} mmu_cacheability_Type;
+
+/* Region parity check attributes */
+typedef enum
+{
+ ECC_DISABLED,
+ ECC_ENABLED,
+} mmu_ecc_check_Type;
+
+/* Region execution attributes */
+typedef enum
+{
+ EXECUTE,
+ NON_EXECUTE,
+} mmu_execute_Type;
+
+/* Region global attributes */
+typedef enum
+{
+ GLOBAL,
+ NON_GLOBAL,
+} mmu_global_Type;
+
+/* Region shareability attributes */
+typedef enum
+{
+ NON_SHARED,
+ SHARED,
+} mmu_shared_Type;
+
+/* Region security attributes */
+typedef enum
+{
+ SECURE,
+ NON_SECURE,
+} mmu_secure_Type;
+
+/* Region access attributes */
+typedef enum
+{
+ NO_ACCESS,
+ RW,
+ READ,
+} mmu_access_Type;
+
+/* Memory Region definition */
+typedef struct RegionStruct {
+ mmu_region_size_Type rg_t;
+ mmu_memory_Type mem_t;
+ uint8_t domain;
+ mmu_cacheability_Type inner_norm_t;
+ mmu_cacheability_Type outer_norm_t;
+ mmu_ecc_check_Type e_t;
+ mmu_execute_Type xn_t;
+ mmu_global_Type g_t;
+ mmu_secure_Type sec_t;
+ mmu_access_Type priv_t;
+ mmu_access_Type user_t;
+ mmu_shared_Type sh_t;
+
+} mmu_region_attributes_Type;
+
+/** \brief Set section execution-never attribute
+
+ The function sets section execution-never attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] xn Section execution-never attribute : EXECUTE , NON_EXECUTE.
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_section(uint32_t *descriptor_l1, mmu_execute_Type xn)
+{
+ *descriptor_l1 &= SECTION_XN_MASK;
+ *descriptor_l1 |= ((xn & 0x1) << SECTION_XN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section domain
+
+ The function sets section domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Section domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_section(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= SECTION_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xF) << SECTION_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section parity check
+
+ The function sets section parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_section(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set section access privileges
+
+ The function sets section access privileges
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_section(uint32_t *descriptor_l1, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x6; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l1 &= SECTION_AP_MASK;
+ *descriptor_l1 |= (ap & 0x3) << SECTION_AP_SHIFT;
+ *descriptor_l1 |= ((ap & 0x4)>>2) << SECTION_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set section shareability
+
+ The function sets section shareability
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_section(uint32_t *descriptor_l1, mmu_shared_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_S_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Global attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] g_bit Section attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_section(uint32_t *descriptor_l1, mmu_global_Type g_bit)
+{
+ *descriptor_l1 &= SECTION_NG_MASK;
+ *descriptor_l1 |= ((g_bit & 0x1) << SECTION_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Security attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_section(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_NS_SHIFT);
+ return 0;
+}
+
+/* Page 4k or 64k */
+/** \brief Set 4k/64k page execution-never attribute
+
+ The function sets 4k/64k page execution-never attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] xn Page execution-never attribute : EXECUTE , NON_EXECUTE.
+ \param [in] page Page size: PAGE_4k, PAGE_64k,
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_page(uint32_t *descriptor_l2, mmu_execute_Type xn, mmu_region_size_Type page)
+{
+ if (page == PAGE_4k)
+ {
+ *descriptor_l2 &= PAGE_XN_4K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_4K_SHIFT);
+ }
+ else
+ {
+ *descriptor_l2 &= PAGE_XN_64K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_64K_SHIFT);
+ }
+ return 0;
+}
+
+/** \brief Set 4k/64k page domain
+
+ The function sets 4k/64k page domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Page domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_page(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= PAGE_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xf) << PAGE_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page parity check
+
+ The function sets 4k/64k page parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_page(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page access privileges
+
+ The function sets 4k/64k page access privileges
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_page(uint32_t *descriptor_l2, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x6; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l2 &= PAGE_AP_MASK;
+ *descriptor_l2 |= (ap & 0x3) << PAGE_AP_SHIFT;
+ *descriptor_l2 |= ((ap & 0x4)>>2) << PAGE_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page shareability
+
+ The function sets 4k/64k page shareability
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] s_bit 4k/64k page shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_page(uint32_t *descriptor_l2, mmu_shared_Type s_bit)
+{
+ *descriptor_l2 &= PAGE_S_MASK;
+ *descriptor_l2 |= ((s_bit & 0x1) << PAGE_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Global attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] g_bit 4k/64k page attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_page(uint32_t *descriptor_l2, mmu_global_Type g_bit)
+{
+ *descriptor_l2 &= PAGE_NG_MASK;
+ *descriptor_l2 |= ((g_bit & 0x1) << PAGE_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Security attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit 4k/64k page Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_page(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= PAGE_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << PAGE_NS_SHIFT);
+ return 0;
+}
+
+
+/** \brief Set Section memory attributes
+
+ The function sets section memory attributes
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] mem Section memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_section(uint32_t *descriptor_l1, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner)
+{
+ *descriptor_l1 &= SECTION_TEXCB_MASK;
+
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l1 |= 1 << SECTION_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT) | (1 << SECTION_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT) | (1 << SECTION_TEX0_SHIFT);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page memory attributes
+
+ The function sets 4k/64k page memory attributes
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] mem 4k/64k page memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_page(uint32_t *descriptor_l2, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner, mmu_region_size_Type page)
+{
+ *descriptor_l2 &= PAGE_4K_TEXCB_MASK;
+
+ if (page == PAGE_64k)
+ {
+ //same as section
+ __memory_section(descriptor_l2, mem, outer, inner);
+ }
+ else
+ {
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l2 |= 1 << PAGE_4K_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT) | (1 << PAGE_4K_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT) | (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Create a L1 section descriptor
+
+ The function creates a section descriptor.
+
+ Assumptions:
+ - 16MB super sections not suported
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg Section attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_section_descriptor(uint32_t *descriptor, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+
+ __memory_section(descriptor, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t);
+ __xn_section(descriptor,reg.xn_t);
+ __domain_section(descriptor, reg.domain);
+ __p_section(descriptor, reg.e_t);
+ __ap_section(descriptor, reg.priv_t, reg.user_t, 1);
+ __shared_section(descriptor,reg.sh_t);
+ __global_section(descriptor,reg.g_t);
+ __secure_section(descriptor,reg.sec_t);
+ *descriptor &= SECTION_MASK;
+ *descriptor |= SECTION_DESCRIPTOR;
+
+ return 0;
+
+}
+
+
+/** \brief Create a L1 and L2 4k/64k page descriptor
+
+ The function creates a 4k/64k page descriptor.
+ Assumptions:
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg 4k/64k page attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_page_descriptor(uint32_t *descriptor, uint32_t *descriptor2, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+ *descriptor2 = 0;
+
+ switch (reg.rg_t)
+ {
+ case PAGE_4k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_4k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_4k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_4K_MASK;
+ *descriptor2 |= PAGE_L2_4K_DESC;
+ break;
+
+ case PAGE_64k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_64k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_64k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_64K_MASK;
+ *descriptor2 |= PAGE_L2_64K_DESC;
+ break;
+
+ case SECTION:
+ //error
+ break;
+
+ }
+
+ return 0;
+
+}
+
+/** \brief Create a 1MB Section
+
+ \param [in] ttb Translation table base address
+ \param [in] base_address Section base address
+ \param [in] count Number of sections to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTSection(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1)
+{
+ uint32_t offset;
+ uint32_t entry;
+ uint32_t i;
+
+ offset = base_address >> 20;
+ entry = (base_address & 0xFFF00000) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb = ttb + offset;
+
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb++ = entry;
+ entry += OFFSET_1M;
+ }
+}
+
+/** \brief Create a 4k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 4k base address
+ \param [in] count Number of 4k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_4k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFFF000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_4K;
+ }
+}
+
+/** \brief Create a 64k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 64k base address
+ \param [in] count Number of 64k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_64k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i,j;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFF0000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //create 16 entries
+ for (j = 0; j < 16; j++)
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_64K;
+ }
+}
+
+/*@} end of MMU_Functions */
+#endif
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/core_cm0.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,682 @@
+/**************************************************************************//**
+ * @file core_cm0.h
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M0
+ @{
+ */
+
+/* CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/core_cm0plus.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,793 @@
+/**************************************************************************//**
+ * @file core_cm0plus.h
+ * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0PLUS_H_GENERIC
+#define __CORE_CM0PLUS_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex-M0+
+ @{
+ */
+
+/* CMSIS CM0P definitions */
+#define __CM0PLUS_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0PLUS_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16) | \
+ __CM0PLUS_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0PLUS_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0PLUS_H_DEPENDANT
+#define __CORE_CM0PLUS_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0PLUS_REV
+ #define __CM0PLUS_REV 0x0000
+ #warning "__CM0PLUS_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __VTOR_PRESENT
+ #define __VTOR_PRESENT 0
+ #warning "__VTOR_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex-M0+ */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+#if (__VTOR_PRESENT == 1)
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+#else
+ uint32_t RESERVED0;
+#endif
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if (__VTOR_PRESENT == 1)
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 8 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 8 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0+ Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0PLUS_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/core_cm3.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,1627 @@
+/**************************************************************************//**
+ * @file core_cm3.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM3_H_GENERIC
+#define __CORE_CM3_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M3
+ @{
+ */
+
+/* CMSIS CM3 definitions */
+#define __CM3_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | \
+ __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x03) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI__VFP_SUPPORT____
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM3_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM3_H_DEPENDANT
+#define __CORE_CM3_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM3_REV
+ #define __CM3_REV 0x0200
+ #warning "__CM3_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M3 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#if (__CM3_REV < 0x0201) /* core r2p1 */
+#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#else
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+#else
+ uint32_t RESERVED1[1];
+#endif
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM3_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/core_cm4.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,1772 @@
+/**************************************************************************//**
+ * @file core_cm4.h
+ * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_H_GENERIC
+#define __CORE_CM4_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M4
+ @{
+ */
+
+/* CMSIS CM4 definitions */
+#define __CM4_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM4_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16) | \
+ __CM4_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x04) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+#include <core_cm4_simd.h> /* Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CM4_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM4_H_DEPENDANT
+#define __CORE_CM4_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM4_REV
+ #define __CM4_REV 0x0000
+ #warning "__CM4_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 0
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M4 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ - Core FPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISOOFP_Pos 9 /*!< ACTLR: DISOOFP Position */
+#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */
+
+#define SCnSCB_ACTLR_DISFPCA_Pos 8 /*!< ACTLR: DISFPCA Position */
+#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_FPU Floating Point Unit (FPU)
+ \brief Type definitions for the Floating Point Unit (FPU)
+ @{
+ */
+
+/** \brief Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __IO uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
+ __IO uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
+ __IO uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
+ __I uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
+ __I uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register */
+#define FPU_FPCCR_ASPEN_Pos 31 /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos 30 /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos 8 /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos 6 /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos 5 /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos 4 /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos 3 /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos 1 /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos 0 /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk (1UL << FPU_FPCCR_LSPACT_Pos) /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register */
+#define FPU_FPCAR_ADDRESS_Pos 3 /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register */
+#define FPU_FPDSCR_AHP_Pos 26 /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos 25 /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos 24 /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos 22 /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 */
+#define FPU_MVFR0_FP_rounding_modes_Pos 28 /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos 24 /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos 20 /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos 16 /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos 12 /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos 8 /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos 4 /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos 0 /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL << FPU_MVFR0_A_SIMD_registers_Pos) /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 */
+#define FPU_MVFR1_FP_fused_MAC_Pos 28 /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos 24 /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos 4 /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos 0 /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk (0xFUL << FPU_MVFR1_FtZ_mode_Pos) /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+#if (__FPU_PRESENT == 1)
+ #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
+ #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+/* NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); enable interrupt */
+ NVIC->ISER[(uint32_t)((int32_t)IRQn) >> 5] = (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM4_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/core_cm4_simd.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,673 @@
+/**************************************************************************//**
+ * @file core_cm4_simd.h
+ * @brief CMSIS Cortex-M4 SIMD Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_SIMD_H
+#define __CORE_CM4_SIMD_H
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ ******************************************************************************/
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#define __SADD8 __sadd8
+#define __QADD8 __qadd8
+#define __SHADD8 __shadd8
+#define __UADD8 __uadd8
+#define __UQADD8 __uqadd8
+#define __UHADD8 __uhadd8
+#define __SSUB8 __ssub8
+#define __QSUB8 __qsub8
+#define __SHSUB8 __shsub8
+#define __USUB8 __usub8
+#define __UQSUB8 __uqsub8
+#define __UHSUB8 __uhsub8
+#define __SADD16 __sadd16
+#define __QADD16 __qadd16
+#define __SHADD16 __shadd16
+#define __UADD16 __uadd16
+#define __UQADD16 __uqadd16
+#define __UHADD16 __uhadd16
+#define __SSUB16 __ssub16
+#define __QSUB16 __qsub16
+#define __SHSUB16 __shsub16
+#define __USUB16 __usub16
+#define __UQSUB16 __uqsub16
+#define __UHSUB16 __uhsub16
+#define __SASX __sasx
+#define __QASX __qasx
+#define __SHASX __shasx
+#define __UASX __uasx
+#define __UQASX __uqasx
+#define __UHASX __uhasx
+#define __SSAX __ssax
+#define __QSAX __qsax
+#define __SHSAX __shsax
+#define __USAX __usax
+#define __UQSAX __uqsax
+#define __UHSAX __uhsax
+#define __USAD8 __usad8
+#define __USADA8 __usada8
+#define __SSAT16 __ssat16
+#define __USAT16 __usat16
+#define __UXTB16 __uxtb16
+#define __UXTAB16 __uxtab16
+#define __SXTB16 __sxtb16
+#define __SXTAB16 __sxtab16
+#define __SMUAD __smuad
+#define __SMUADX __smuadx
+#define __SMLAD __smlad
+#define __SMLADX __smladx
+#define __SMLALD __smlald
+#define __SMLALDX __smlaldx
+#define __SMUSD __smusd
+#define __SMUSDX __smusdx
+#define __SMLSD __smlsd
+#define __SMLSDX __smlsdx
+#define __SMLSLD __smlsld
+#define __SMLSLDX __smlsldx
+#define __SEL __sel
+#define __QADD __qadd
+#define __QSUB __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
+ ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
+
+#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
+ ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
+
+#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+ ((int64_t)(ARG3) << 32) ) >> 32))
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_iar.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_ccs.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLALD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLALDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLSLD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLSLDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ if (ARG3 == 0) \
+ __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
+ else \
+ __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+/* not yet supported */
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CORE_CM4_SIMD_H */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/core_cmFunc.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,636 @@
+/**************************************************************************//**
+ * @file core_cmFunc.h
+ * @brief CMSIS Cortex-M Core Function Access Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ register uint32_t __regIPSR __ASM("ipsr");
+ return(__regIPSR);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ register uint32_t __regXPSR __ASM("xpsr");
+ return(__regXPSR);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ return(__regProcessStackPointer);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ __regProcessStackPointer = topOfProcStack;
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ return(__regMainStackPointer);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ __regMainStackPointer = topOfMainStack;
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0xff);
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/** \brief Enable IRQ Interrupts
+
+ This function enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ uint32_t result;
+
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all instrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CMFUNC_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/core_cmInstr.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,688 @@
+/**************************************************************************//**
+ * @file core_cmInstr.h
+ * @brief CMSIS Cortex-M Core Instruction Access Header File
+ * @version V3.20
+ * @date 05. March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __nop
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+#define __WFI __wfi
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __wfe
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __sev
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+#define __ISB() __isb(0xF)
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() __dsb(0xF)
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() __dmb(0xF)
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __rev
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+ rev16 r0, r0
+ bx lr
+}
+#endif
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+ revsh r0, r0
+ bx lr
+}
+#endif
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+#define __ROR __ror
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __breakpoint(value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __RBIT __rbit
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXB(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXH(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXW(value, ptr) __strex(value, ptr)
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+#define __CLREX __clrex
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT __ssat
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __usat
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __clz
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constrant "l"
+ * Otherwise, use general registers, specified by constrant "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __NOP(void)
+{
+ __ASM volatile ("nop");
+}
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFI(void)
+{
+ __ASM volatile ("wfi");
+}
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFE(void)
+{
+ __ASM volatile ("wfe");
+}
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __SEV(void)
+{
+ __ASM volatile ("sev");
+}
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ISB(void)
+{
+ __ASM volatile ("isb");
+}
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DSB(void)
+{
+ __ASM volatile ("dsb");
+}
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void)
+{
+ __ASM volatile ("dmb");
+}
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+ return __builtin_bswap32(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ return (short)__builtin_bswap16(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32 - op2));
+}
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void)
+{
+ __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/crc_regs.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,89 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef _MXC_CRC_REGS_H_
+#define _MXC_CRC_REGS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/**
+ * @file crc_regs.h
+ * @addtogroup crc CRC
+ * @{
+ */
+
+/* Offset Register Description
+ ====== ======================================================= */
+typedef struct {
+ __IO uint32_t reseed; /* 0x0000 CRC-16/CRC-32 Reseed Controls */
+ __IO uint32_t seed16; /* 0x0004 Reseed Value for CRC-16 Calculations */
+ __IO uint32_t seed32; /* 0x0008 Reseed Value for CRC-32 Calculations */
+} mxc_crc_regs_t;
+
+/* Offset Register Description
+ ====== ======================================================= */
+typedef struct {
+ __IO uint32_t value16[512]; /* 0x0000 Write Next CRC-16 Data Value / Read CRC-16 Result Value */
+ __IO uint32_t value32[512]; /* 0x0800 Write Next CRC-32 Data Value / Read CRC-32 Result Value */
+} mxc_crc_data_regs_t;
+
+/*
+ Register offsets for module CRC.
+*/
+#define MXC_R_CRC_OFFS_RESEED ((uint32_t)0x00000000UL)
+#define MXC_R_CRC_OFFS_SEED16 ((uint32_t)0x00000004UL)
+#define MXC_R_CRC_OFFS_SEED32 ((uint32_t)0x00000008UL)
+#define MXC_R_CRC_DATA_OFFS_VALUE16 ((uint32_t)0x00000000UL)
+#define MXC_R_CRC_DATA_OFFS_VALUE32 ((uint32_t)0x00000800UL)
+
+/*
+ Field positions and masks for module CRC.
+*/
+#define MXC_F_CRC_RESEED_CRC16_POS 0
+#define MXC_F_CRC_RESEED_CRC16 ((uint32_t)(0x00000001UL << MXC_F_CRC_RESEED_CRC16_POS))
+#define MXC_F_CRC_RESEED_CRC32_POS 1
+#define MXC_F_CRC_RESEED_CRC32 ((uint32_t)(0x00000001UL << MXC_F_CRC_RESEED_CRC32_POS))
+
+#ifdef __cplusplus
+}
+#endif
+
+/**
+* @}
+*/
+
+#endif /* _MXC_CRC_REGS_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/dac_regs.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,180 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef _MXC_DAC_REGS_H
+#define _MXC_DAC_REGS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/**
+ * @file dac_regs.h
+ * @addtogroup dac DAC
+ * @{
+ */
+
+/**
+ * @brief Defines the DAC Operational Modes.
+ */
+typedef enum {
+ /** DAC OpMode FIFO */
+ MXC_E_DAC_OP_MODE_FIFO = 0,
+ /** DAC OpMode Sample Count */
+ MXC_E_DAC_OP_MODE_DACSMPLCNT,
+ /** DAC OpMode DAC_REG Control */
+ MXC_E_DAC_OP_MODE_DAC_REG,
+ /** DAC OpMode Continuous */
+ MXC_E_DAC_OP_MODE_CONTINUOUS
+} mxc_dac_op_mode_t;
+
+/**
+ * @brief Defines the DAC Interpolation Options.
+ */
+typedef enum {
+ /** DAC Interpolation is Disabled */
+ MXC_E_DAC_INTERP_MODE_DISABLED = 0,
+ /** DAC Interpolation 2:1 */
+ MXC_E_DAC_INTERP_MODE_2_TO_1,
+ /** DAC Interpolation 4:1 */
+ MXC_E_DAC_INTERP_MODE_4_TO_1,
+ /** DAC Interpolation 8:1 */
+ MXC_E_DAC_INTERP_MODE_8_TO_1
+} mxc_dac_interp_mode_t;
+
+/**
+ * @brief Defines the DAC Start Modes.
+ */
+typedef enum {
+ /** Start on FIFO Not Empty */
+ MXC_E_DAC_START_MODE_FIFO_NOT_EMPTY = 0,
+ /** Start on ADC generated Start Strobe */
+ MXC_E_DAC_START_MODE_ADC_STROBE,
+ /** Start on DAC generated Start Strobe */
+ MXC_E_DAC_START_MODE_DAC_STROBE
+} mxc_dac_start_mode_t;
+
+/* Offset Register Description
+ ====== ================================================== */
+typedef struct {
+ __IO uint32_t ctrl0; /* 0x0000 DAC Control Register 0 */
+ __IO uint32_t rate; /* 0x0004 DAC Output Rate Control */
+ __IO uint32_t ctrl1_int; /* 0x0008 DAC Control Register 1, Interrupt Flags and Enable */
+ __IO uint32_t reg; /* 0x000C DAC Data Register */
+ __IO uint32_t trm; /* 0x0010 DAC Trim Register */
+} mxc_dac_regs_t;
+
+/* Offset Register Description
+ ====== ================================================== */
+typedef struct {
+ union {
+ __IO uint8_t output_8; /* 0x0000 Write to push values to DAC output FIFO */
+ __IO uint16_t output_16; /* 0x0000 Write to push values to DAC output FIFO */
+ };
+} mxc_dac_fifo_t;
+
+/*
+ Register offsets for module DAC12.
+*/
+#define MXC_R_DAC_OFFS_CTRL0 ((uint32_t)0x00000000UL)
+#define MXC_R_DAC_OFFS_RATE ((uint32_t)0x00000004UL)
+#define MXC_R_DAC_OFFS_CTRL1_INT ((uint32_t)0x00000008UL)
+#define MXC_R_DAC_FIFO_OFFS_OUTPUT ((uint32_t)0x00000000UL)
+
+/*
+ Field positions and masks for module DAC.
+*/
+#define MXC_F_DAC_CTRL0_FIFO_AE_CNT_POS 0
+#define MXC_F_DAC_CTRL0_FIFO_AE_CNT ((uint32_t)(0x0000000FUL << MXC_F_DAC_CTRL0_FIFO_AE_CNT_POS))
+#define MXC_F_DAC_CTRL0_FIFO_ALMOST_FULL_POS 5
+#define MXC_F_DAC_CTRL0_FIFO_ALMOST_FULL ((uint32_t)(0x00000001UL << MXC_F_DAC_CTRL0_FIFO_ALMOST_FULL_POS))
+#define MXC_F_DAC_CTRL0_FIFO_EMPTY_POS 6
+#define MXC_F_DAC_CTRL0_FIFO_EMPTY ((uint32_t)(0x00000001UL << MXC_F_DAC_CTRL0_FIFO_EMPTY_POS))
+#define MXC_F_DAC_CTRL0_FIFO_ALMOST_EMPTY_POS 7
+#define MXC_F_DAC_CTRL0_FIFO_ALMOST_EMPTY ((uint32_t)(0x00000001UL << MXC_F_DAC_CTRL0_FIFO_ALMOST_EMPTY_POS))
+#define MXC_F_DAC_CTRL0_INTERP_MODE_POS 8
+#define MXC_F_DAC_CTRL0_INTERP_MODE ((uint32_t)(0x00000007UL << MXC_F_DAC_CTRL0_INTERP_MODE_POS))
+#define MXC_F_DAC_CTRL0_FIFO_AF_CNT_POS 12
+#define MXC_F_DAC_CTRL0_FIFO_AF_CNT ((uint32_t)(0x0000000FUL << MXC_F_DAC_CTRL0_FIFO_AF_CNT_POS))
+#define MXC_F_DAC_CTRL0_START_MODE_POS 16
+#define MXC_F_DAC_CTRL0_START_MODE ((uint32_t)(0x00000003UL << MXC_F_DAC_CTRL0_START_MODE_POS))
+#define MXC_F_DAC_CTRL0_CPU_START_POS 20
+#define MXC_F_DAC_CTRL0_CPU_START ((uint32_t)(0x00000001UL << MXC_F_DAC_CTRL0_CPU_START_POS))
+#define MXC_F_DAC_CTRL0_OP_MODE_POS 24
+#define MXC_F_DAC_CTRL0_OP_MODE ((uint32_t)(0x00000003UL << MXC_F_DAC_CTRL0_OP_MODE_POS))
+#define MXC_F_DAC_CTRL0_POWER_MODE_1_0_POS 26
+#define MXC_F_DAC_CTRL0_POWER_MODE_1_0 ((uint32_t)(0x00000003UL << MXC_F_DAC_CTRL0_POWER_MODE_1_0_POS))
+#define MXC_F_DAC_CTRL0_POWER_ON_POS 28
+#define MXC_F_DAC_CTRL0_POWER_ON ((uint32_t)(0x00000001UL << MXC_F_DAC_CTRL0_POWER_ON_POS))
+#define MXC_F_DAC_CTRL0_CLOCK_GATE_EN_POS 29
+#define MXC_F_DAC_CTRL0_CLOCK_GATE_EN ((uint32_t)(0x00000001UL << MXC_F_DAC_CTRL0_CLOCK_GATE_EN_POS))
+#define MXC_F_DAC_CTRL0_POWER_MODE_2_POS 30
+#define MXC_F_DAC_CTRL0_POWER_MODE_2 ((uint32_t)(0x00000001UL << MXC_F_DAC_CTRL0_POWER_MODE_2_POS))
+#define MXC_F_DAC_CTRL0_RESET_POS 31
+#define MXC_F_DAC_CTRL0_RESET ((uint32_t)(0x00000001UL << MXC_F_DAC_CTRL0_RESET_POS))
+
+#define MXC_F_DAC_RATE_RATE_CNT_POS 0
+#define MXC_F_DAC_RATE_RATE_CNT ((uint32_t)(0x0000FFFFUL << MXC_F_DAC_RATE_RATE_CNT_POS))
+#define MXC_F_DAC_RATE_SAMPLE_CNT_POS 16
+#define MXC_F_DAC_RATE_SAMPLE_CNT ((uint32_t)(0x0000FFFFUL << MXC_F_DAC_RATE_SAMPLE_CNT_POS))
+
+#define MXC_F_DAC_CTRL1_INT_OUT_DONE_IF_POS 0
+#define MXC_F_DAC_CTRL1_INT_OUT_DONE_IF ((uint32_t)(0x00000001UL << MXC_F_DAC_CTRL1_INT_OUT_DONE_IF_POS))
+#define MXC_F_DAC_CTRL1_INT_UNDERFLOW_IF_POS 1
+#define MXC_F_DAC_CTRL1_INT_UNDERFLOW_IF ((uint32_t)(0x00000001UL << MXC_F_DAC_CTRL1_INT_UNDERFLOW_IF_POS))
+#define MXC_F_DAC_CTRL1_INT_ALMOST_EMPTY_IF_POS 2
+#define MXC_F_DAC_CTRL1_INT_ALMOST_EMPTY_IF ((uint32_t)(0x00000001UL << MXC_F_DAC_CTRL1_INT_ALMOST_EMPTY_IF_POS))
+#define MXC_F_DAC_CTRL1_INT_UNDERFLOW_POS 3
+#define MXC_F_DAC_CTRL1_INT_UNDERFLOW ((uint32_t)(0x00000001UL << MXC_F_DAC_CTRL1_INT_UNDERFLOW_POS))
+#define MXC_F_DAC_CTRL1_INT_OUT_DONE_IE_POS 16
+#define MXC_F_DAC_CTRL1_INT_OUT_DONE_IE ((uint32_t)(0x00000001UL << MXC_F_DAC_CTRL1_INT_OUT_DONE_IE_POS))
+#define MXC_F_DAC_CTRL1_INT_UNDERFLOW_IE_POS 17
+#define MXC_F_DAC_CTRL1_INT_UNDERFLOW_IE ((uint32_t)(0x00000001UL << MXC_F_DAC_CTRL1_INT_UNDERFLOW_IE_POS))
+#define MXC_F_DAC_CTRL1_INT_ALMOST_EMPTY_IE_POS 18
+#define MXC_F_DAC_CTRL1_INT_ALMOST_EMPTY_IE ((uint32_t)(0x00000001UL << MXC_F_DAC_CTRL1_INT_ALMOST_EMPTY_IE_POS))
+#define MXC_F_DAC_CTRL1_INT_AHB_CG_DISABLE_POS 28
+#define MXC_F_DAC_CTRL1_INT_AHB_CG_DISABLE ((uint32_t)(0x00000001UL << MXC_F_DAC_CTRL1_INT_AHB_CG_DISABLE_POS))
+#define MXC_F_DAC_CTRL1_INT_APB_CG_DISABLE_POS 29
+#define MXC_F_DAC_CTRL1_INT_APB_CG_DISABLE ((uint32_t)(0x00000001UL << MXC_F_DAC_CTRL1_INT_APB_CG_DISABLE_POS))
+
+#ifdef __cplusplus
+}
+#endif
+
+/**
+* @}
+*/
+
+#endif /* _DAC12_REGS_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/flc_regs.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,210 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef _MXC_FLC_REGS_H
+#define _MXC_FLC_REGS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/**
+ * @file flc_regs.h
+ * @addtogroup flc FLC
+ * @{
+ */
+/* Offset Register Description
+ ====== ======================================================= */
+typedef struct {
+ __IO uint32_t faddr; /* 0x0000 Flash Operation Address */
+ __IO uint32_t fckdiv; /* 0x0004 Flash Clock Rate Divisor */
+ __IO uint32_t ctrl; /* 0x0008 Flash Control Register */
+ __I uint32_t rsv000C[6]; /* 0x000C */
+ __IO uint32_t intr; /* 0x0024 Flash Controller Interrupt Flags and Enable/Disable 0 */
+ __I uint32_t rsv0028[2]; /* 0x0028 */
+ __IO uint32_t fdata; /* 0x0030 Flash Operation Data Register */
+ __I uint32_t rsv0034[7]; /* 0x0034 */
+ __IO uint32_t perform; /* 0x0050 Flash Performance Settings */
+ __I uint32_t rsv0054[11]; /* 0x0054 */
+ __IO uint32_t status; /* 0x0080 Security Status Flags */
+ __I uint32_t rsv0084; /* 0x0084 */
+ __IO uint32_t security; /* 0x0088 Flash Controller Security Settings */
+ __I uint32_t rsv008C[4]; /* 0x008C */
+ __IO uint32_t bypass; /* 0x009C Status Flags for DSB Operations */
+ __IO uint32_t user_option; /* 0x0100 Used to set DSB Access code and Auto-Lock in info block */
+ __I uint32_t rsv0104[15]; /* 0x0104 */
+ __IO uint32_t ctrl2; /* 0x0140 Flash Control Register 2 */
+ __IO uint32_t intfl1; /* 0x0144 Interrupt Flags Register 1 */
+ __IO uint32_t inten1; /* 0x0148 Interrupt Enable/Disable Register 1 */
+ __I uint32_t rsv014C; /* 0x014C */
+ __IO uint32_t disable_xr0; /* 0x0150 Disable Flash Page Exec/Read Register 0 */
+ __IO uint32_t disable_xr1; /* 0x0154 Disable Flash Page Exec/Read Register 1 */
+ __IO uint32_t disable_xr2; /* 0x0158 Disable Flash Page Exec/Read Register 2 */
+ __IO uint32_t disable_xr3; /* 0x015C Disable Flash Page Exec/Read Register 3 */
+ __IO uint32_t disable_we0; /* 0x0160 Disable Flash Page Write/Erase Register 0 */
+ __IO uint32_t disable_we1; /* 0x0164 Disable Flash Page Write/Erase Register 1 */
+ __IO uint32_t disable_we2; /* 0x0168 Disable Flash Page Write/Erase Register 2 */
+ __IO uint32_t disable_we3; /* 0x016C Disable Flash Page Write/Erase Register 3 */
+} mxc_flc_regs_t;
+
+/*
+ Register offsets for module FLC.
+*/
+#define MXC_R_FLC_OFFS_FADDR ((uint32_t)0x00000000UL)
+#define MXC_R_FLC_OFFS_FCKDIV ((uint32_t)0x00000004UL)
+#define MXC_R_FLC_OFFS_CTRL ((uint32_t)0x00000008UL)
+#define MXC_R_FLC_OFFS_INTR ((uint32_t)0x00000024UL)
+#define MXC_R_FLC_OFFS_FDATA ((uint32_t)0x00000030UL)
+#define MXC_R_FLC_OFFS_PERFORM ((uint32_t)0x00000050UL)
+#define MXC_R_FLC_OFFS_STATUS ((uint32_t)0x00000080UL)
+#define MXC_R_FLC_OFFS_SECURITY ((uint32_t)0x00000088UL)
+#define MXC_R_FLC_OFFS_BYPASS ((uint32_t)0x0000009CUL)
+#define MXC_R_FLC_OFFS_USER_OPTION ((uint32_t)0x00000100UL)
+#define MXC_R_FLC_OFFS_CTRL2 ((uint32_t)0x00000140UL)
+#define MXC_R_FLC_OFFS_INTFL1 ((uint32_t)0x00000144UL)
+#define MXC_R_FLC_OFFS_INTEN1 ((uint32_t)0x00000148UL)
+#define MXC_R_FLC_OFFS_DISABLE_XR0 ((uint32_t)0x00000150UL)
+#define MXC_R_FLC_OFFS_DISABLE_XR1 ((uint32_t)0x00000154UL)
+#define MXC_R_FLC_OFFS_DISABLE_XR2 ((uint32_t)0x00000158UL)
+#define MXC_R_FLC_OFFS_DISABLE_XR3 ((uint32_t)0x0000015CUL)
+#define MXC_R_FLC_OFFS_DISABLE_WE0 ((uint32_t)0x00000160UL)
+#define MXC_R_FLC_OFFS_DISABLE_WE1 ((uint32_t)0x00000164UL)
+#define MXC_R_FLC_OFFS_DISABLE_WE2 ((uint32_t)0x00000168UL)
+#define MXC_R_FLC_OFFS_DISABLE_WE3 ((uint32_t)0x0000016CUL)
+
+#define MXC_V_FLC_ERASE_CODE_PAGE_ERASE ((uint8_t)0x55)
+#define MXC_V_FLC_ERASE_CODE_MASS_ERASE ((uint8_t)0xAA)
+
+#define MXC_V_FLC_FLSH_UNLOCK_KEY ((uint8_t)0x2)
+
+/*
+ Field positions and masks for module FLC.
+*/
+#define MXC_F_FLC_FADDR_FADDR_POS 0
+#define MXC_F_FLC_FADDR_FADDR ((uint32_t)(0x0003FFFFUL << MXC_F_FLC_FADDR_FADDR_POS))
+
+#define MXC_F_FLC_FCKDIV_FCKDIV_POS 0
+#define MXC_F_FLC_FCKDIV_FCKDIV ((uint32_t)(0x0000001FUL << MXC_F_FLC_FCKDIV_FCKDIV_POS))
+
+#define MXC_F_FLC_CTRL_WRITE_POS 0
+#define MXC_F_FLC_CTRL_WRITE ((uint32_t)(0x00000001UL << MXC_F_FLC_CTRL_WRITE_POS))
+#define MXC_F_FLC_CTRL_MASS_ERASE_POS 1
+#define MXC_F_FLC_CTRL_MASS_ERASE ((uint32_t)(0x00000001UL << MXC_F_FLC_CTRL_MASS_ERASE_POS))
+#define MXC_F_FLC_CTRL_PAGE_ERASE_POS 2
+#define MXC_F_FLC_CTRL_PAGE_ERASE ((uint32_t)(0x00000001UL << MXC_F_FLC_CTRL_PAGE_ERASE_POS))
+#define MXC_F_FLC_CTRL_ERASE_CODE_POS 8
+#define MXC_F_FLC_CTRL_ERASE_CODE ((uint32_t)(0x000000FFUL << MXC_F_FLC_CTRL_ERASE_CODE_POS))
+#define MXC_F_FLC_CTRL_INFO_BLOCK_UNLOCK_POS 16
+#define MXC_F_FLC_CTRL_INFO_BLOCK_UNLOCK ((uint32_t)(0x00000001UL << MXC_F_FLC_CTRL_INFO_BLOCK_UNLOCK_POS))
+#define MXC_F_FLC_CTRL_WRITE_ENABLE_POS 17
+#define MXC_F_FLC_CTRL_WRITE_ENABLE ((uint32_t)(0x00000001UL << MXC_F_FLC_CTRL_WRITE_ENABLE_POS))
+#define MXC_F_FLC_CTRL_PENDING_POS 24
+#define MXC_F_FLC_CTRL_PENDING ((uint32_t)(0x00000001UL << MXC_F_FLC_CTRL_PENDING_POS))
+#define MXC_F_FLC_CTRL_INFO_BLOCK_VALID_POS 25
+#define MXC_F_FLC_CTRL_INFO_BLOCK_VALID ((uint32_t)(0x00000001UL << MXC_F_FLC_CTRL_INFO_BLOCK_VALID_POS))
+#define MXC_F_FLC_CTRL_AUTO_INCRE_MODE_POS 27
+#define MXC_F_FLC_CTRL_AUTO_INCRE_MODE ((uint32_t)(0x00000001UL << MXC_F_FLC_CTRL_AUTO_INCRE_MODE_POS))
+#define MXC_F_FLC_CTRL_FLSH_UNLOCK_POS 28
+#define MXC_F_FLC_CTRL_FLSH_UNLOCK ((uint32_t)(0x0000000FUL << MXC_F_FLC_CTRL_FLSH_UNLOCK_POS))
+
+#define MXC_F_FLC_INTR_FLASH_OP_DONE_IF_POS 0
+#define MXC_F_FLC_INTR_FLASH_OP_DONE_IF ((uint32_t)(0x00000001UL << MXC_F_FLC_INTR_FLASH_OP_DONE_IF_POS))
+#define MXC_F_FLC_INTR_FLASH_OP_FAILED_IF_POS 1
+#define MXC_F_FLC_INTR_FLASH_OP_FAILED_IF ((uint32_t)(0x00000001UL << MXC_F_FLC_INTR_FLASH_OP_FAILED_IF_POS))
+#define MXC_F_FLC_INTR_FLASH_OP_DONE_IE_POS 9
+#define MXC_F_FLC_INTR_FLASH_OP_DONE_IE ((uint32_t)(0x00000001UL << MXC_F_FLC_INTR_FLASH_OP_DONE_IE_POS))
+#define MXC_F_FLC_INTR_FLASH_OP_FAILED_IE_POS 10
+#define MXC_F_FLC_INTR_FLASH_OP_FAILED_IE ((uint32_t)(0x00000001UL << MXC_F_FLC_INTR_FLASH_OP_FAILED_IE_POS))
+
+#define MXC_F_FLC_PERFORM_FAST_READ_MODE_EN_POS 8
+#define MXC_F_FLC_PERFORM_FAST_READ_MODE_EN ((uint32_t)(0x00000001UL << MXC_F_FLC_PERFORM_FAST_READ_MODE_EN_POS))
+#define MXC_F_FLC_PERFORM_DELAY_SE_EN_POS 0
+#define MXC_F_FLC_PERFORM_DELAY_SE_EN ((uint32_t)(0x00000001UL << MXC_F_FLC_PERFORM_DELAY_SE_EN_POS))
+
+#define MXC_F_FLC_STATUS_DEBUG_LOCK_WINDOW_POS 0
+#define MXC_F_FLC_STATUS_DEBUG_LOCK_WINDOW ((uint32_t)(0x00000001UL << MXC_F_FLC_STATUS_DEBUG_LOCK_WINDOW_POS))
+#define MXC_F_FLC_STATUS_DEBUG_LOCK_STATIC_POS 1
+#define MXC_F_FLC_STATUS_DEBUG_LOCK_STATIC ((uint32_t)(0x00000001UL << MXC_F_FLC_STATUS_DEBUG_LOCK_STATIC_POS))
+#define MXC_F_FLC_STATUS_AUTO_LOCK_POS 3
+#define MXC_F_FLC_STATUS_AUTO_LOCK ((uint32_t)(0x00000001UL << MXC_F_FLC_STATUS_AUTO_LOCK_POS))
+
+#define MXC_F_FLC_SECURITY_DEBUG_DISABLE_POS 0
+#define MXC_F_FLC_SECURITY_DEBUG_DISABLE ((uint32_t)(0x000000FFUL << MXC_F_FLC_SECURITY_DEBUG_DISABLE_POS))
+#define MXC_F_FLC_SECURITY_MASS_ERASE_LOCK_POS 8
+#define MXC_F_FLC_SECURITY_MASS_ERASE_LOCK ((uint32_t)(0x0000000FUL << MXC_F_FLC_SECURITY_MASS_ERASE_LOCK_POS))
+#define MXC_F_FLC_SECURITY_SECURITY_LOCK_POS 31
+#define MXC_F_FLC_SECURITY_SECURITY_LOCK ((uint32_t)(0x00000001UL << MXC_F_FLC_SECURITY_SECURITY_LOCK_POS))
+
+#define MXC_F_FLC_BYPASS_DESTRUCT_BYPASS_ERASE_POS 0
+#define MXC_F_FLC_BYPASS_DESTRUCT_BYPASS_ERASE ((uint32_t)(0x00000001UL << MXC_F_FLC_BYPASS_DESTRUCT_BYPASS_ERASE_POS))
+#define MXC_F_FLC_BYPASS_SUPERWIPE_ERASE_POS 1
+#define MXC_F_FLC_BYPASS_SUPERWIPE_ERASE ((uint32_t)(0x00000001UL << MXC_F_FLC_BYPASS_SUPERWIPE_ERASE_POS))
+#define MXC_F_FLC_BYPASS_DESTRUCT_BYPASS_COMPLETE_POS 2
+#define MXC_F_FLC_BYPASS_DESTRUCT_BYPASS_COMPLETE ((uint32_t)(0x00000001UL << MXC_F_FLC_BYPASS_DESTRUCT_BYPASS_COMPLETE_POS))
+#define MXC_F_FLC_BYPASS_SUPERWIPE_COMPLETE_POS 3
+#define MXC_F_FLC_BYPASS_SUPERWIPE_COMPLETE ((uint32_t)(0x00000001UL << MXC_F_FLC_BYPASS_SUPERWIPE_COMPLETE_POS))
+
+#define MXC_F_FLC_CTRL2_FLASH_LVE_POS 0
+#define MXC_F_FLC_CTRL2_FLASH_LVE ((uint32_t)(0x000000FFUL << MXC_F_FLC_CTRL2_FLASH_LVE_POS))
+#define MXC_F_FLC_CTRL2_BYPASS_AHB_FAIL_POS 8
+#define MXC_F_FLC_CTRL2_BYPASS_AHB_FAIL ((uint32_t)(0x000000FFUL << MXC_F_FLC_CTRL2_BYPASS_AHB_FAIL_POS))
+
+#define MXC_F_FLC_INTFL1_SRAM_ADDR_WRAPPED_POS 0
+#define MXC_F_FLC_INTFL1_SRAM_ADDR_WRAPPED ((uint32_t)(0x00000001UL << MXC_F_FLC_INTFL1_SRAM_ADDR_WRAPPED_POS))
+#define MXC_F_FLC_INTFL1_INVALID_FLASH_ADDR_POS 1
+#define MXC_F_FLC_INTFL1_INVALID_FLASH_ADDR ((uint32_t)(0x00000001UL << MXC_F_FLC_INTFL1_INVALID_FLASH_ADDR_POS))
+#define MXC_F_FLC_INTFL1_FLASH_READ_LOCKED_POS 2
+#define MXC_F_FLC_INTFL1_FLASH_READ_LOCKED ((uint32_t)(0x00000001UL << MXC_F_FLC_INTFL1_FLASH_READ_LOCKED_POS))
+#define MXC_F_FLC_INTFL1_TRIM_UPDATE_DONE_POS 3
+#define MXC_F_FLC_INTFL1_TRIM_UPDATE_DONE ((uint32_t)(0x00000001UL << MXC_F_FLC_INTFL1_TRIM_UPDATE_DONE_POS))
+
+#define MXC_F_FLC_INTEN1_SRAM_ADDR_WRAPPED_POS 0
+#define MXC_F_FLC_INTEN1_SRAM_ADDR_WRAPPED ((uint32_t)(0x00000001UL << MXC_F_FLC_INTEN1_SRAM_ADDR_WRAPPED_POS))
+#define MXC_F_FLC_INTEN1_INVALID_FLASH_ADDR_POS 1
+#define MXC_F_FLC_INTEN1_INVALID_FLASH_ADDR ((uint32_t)(0x00000001UL << MXC_F_FLC_INTEN1_INVALID_FLASH_ADDR_POS))
+#define MXC_F_FLC_INTEN1_FLASH_READ_LOCKED_POS 2
+#define MXC_F_FLC_INTEN1_FLASH_READ_LOCKED ((uint32_t)(0x00000001UL << MXC_F_FLC_INTEN1_FLASH_READ_LOCKED_POS))
+#define MXC_F_FLC_INTEN1_TRIM_UPDATE_DONE_POS 3
+#define MXC_F_FLC_INTEN1_TRIM_UPDATE_DONE ((uint32_t)(0x00000001UL << MXC_F_FLC_INTEN1_TRIM_UPDATE_DONE_POS))
+
+#ifdef __cplusplus
+}
+#endif
+
+/**
+* @}
+*/
+
+#endif /* _MXC_FLC_REGS_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/gpio_regs.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,477 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef _MXC_GPIO_REGS_H_
+#define _MXC_GPIO_REGS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/**
+ * @file gpio_regs.h
+ * @addtogroup gpio GPIO
+ * @{
+ */
+
+/* Offset Register Description
+ ============= ========================================== */
+typedef struct {
+ __I uint32_t rsv000[16]; /* 0x0000-0x003C */
+
+ __IO uint32_t free[8]; /* 0x0040-0x005C Port P[0..7] Free for GPIO Operation Flags */
+ __I uint32_t rsv060[8]; /* 0x0060-0x007C */
+
+ __IO uint32_t out_mode[8]; /* 0x0080-0x009C Port P[0..7] GPIO Output Drive Mode */
+ __I uint32_t rsv0A0[8]; /* 0x00A0-0x00BC */
+
+ __IO uint32_t out_val[8]; /* 0x00C0-0x00DC Port P[0..7] GPIO Output Value */
+ __I uint32_t rsv0E0[8]; /* 0x00E0-0x00FC */
+
+ __IO uint32_t func_sel[8]; /* 0x0100-0x011C Port P[0..7] GPIO Function Select */
+ __I uint32_t rsv120[8]; /* 0x0120-0x013C */
+
+ __IO uint32_t in_mode[8]; /* 0x0140-0x015C Port P[0..7] GPIO Input Monitoring Mode */
+ __I uint32_t rsv160[8]; /* 0x0160-0x017C */
+
+ __IO uint32_t in_val[8]; /* 0x0180-0x019C Port P[0..7] GPIO Input Value */
+ __I uint32_t rsv1A0[8]; /* 0x01A0-0x01BC */
+
+ __IO uint32_t int_mode[8]; /* 0x01C0-0x01DC Port P[0..7] Interrupt Detection Mode */
+ __I uint32_t rsv1E0[8]; /* 0x01E0-0x01FC */
+
+ __IO uint32_t intfl[8]; /* 0x0200-0x021C Port P[0..7] Interrupt Flags */
+ __I uint32_t rsv220[8]; /* 0x0220-0x023C */
+
+ __IO uint32_t inten[8]; /* 0x0240-0x025C Port P[0..7] Interrupt Enables */
+} mxc_gpio_regs_t;
+
+/*
+ Register offsets for module GPIO.
+*/
+#define MXC_R_GPIO_OFFS_FREE_P0 ((uint32_t)0x00000040UL)
+#define MXC_R_GPIO_OFFS_FREE_P1 ((uint32_t)0x00000044UL)
+#define MXC_R_GPIO_OFFS_FREE_P2 ((uint32_t)0x00000048UL)
+#define MXC_R_GPIO_OFFS_FREE_P3 ((uint32_t)0x0000004CUL)
+#define MXC_R_GPIO_OFFS_FREE_P4 ((uint32_t)0x00000050UL)
+#define MXC_R_GPIO_OFFS_FREE_P5 ((uint32_t)0x00000054UL)
+#define MXC_R_GPIO_OFFS_FREE_P6 ((uint32_t)0x00000058UL)
+#define MXC_R_GPIO_OFFS_FREE_P7 ((uint32_t)0x0000005CUL)
+#define MXC_R_GPIO_OFFS_OUT_MODE_P0 ((uint32_t)0x00000080UL)
+#define MXC_R_GPIO_OFFS_OUT_MODE_P1 ((uint32_t)0x00000084UL)
+#define MXC_R_GPIO_OFFS_OUT_MODE_P2 ((uint32_t)0x00000088UL)
+#define MXC_R_GPIO_OFFS_OUT_MODE_P3 ((uint32_t)0x0000008CUL)
+#define MXC_R_GPIO_OFFS_OUT_MODE_P4 ((uint32_t)0x00000090UL)
+#define MXC_R_GPIO_OFFS_OUT_MODE_P5 ((uint32_t)0x00000094UL)
+#define MXC_R_GPIO_OFFS_OUT_MODE_P6 ((uint32_t)0x00000098UL)
+#define MXC_R_GPIO_OFFS_OUT_MODE_P7 ((uint32_t)0x0000009CUL)
+#define MXC_R_GPIO_OFFS_OUT_VAL_P0 ((uint32_t)0x000000C0UL)
+#define MXC_R_GPIO_OFFS_OUT_VAL_P1 ((uint32_t)0x000000C4UL)
+#define MXC_R_GPIO_OFFS_OUT_VAL_P2 ((uint32_t)0x000000C8UL)
+#define MXC_R_GPIO_OFFS_OUT_VAL_P3 ((uint32_t)0x000000CCUL)
+#define MXC_R_GPIO_OFFS_OUT_VAL_P4 ((uint32_t)0x000000D0UL)
+#define MXC_R_GPIO_OFFS_OUT_VAL_P5 ((uint32_t)0x000000D4UL)
+#define MXC_R_GPIO_OFFS_OUT_VAL_P6 ((uint32_t)0x000000D8UL)
+#define MXC_R_GPIO_OFFS_OUT_VAL_P7 ((uint32_t)0x000000DCUL)
+#define MXC_R_GPIO_OFFS_FUNC_SEL_P0 ((uint32_t)0x00000100UL)
+#define MXC_R_GPIO_OFFS_FUNC_SEL_P1 ((uint32_t)0x00000104UL)
+#define MXC_R_GPIO_OFFS_FUNC_SEL_P2 ((uint32_t)0x00000108UL)
+#define MXC_R_GPIO_OFFS_FUNC_SEL_P6 ((uint32_t)0x00000118UL)
+#define MXC_R_GPIO_OFFS_FUNC_SEL_P7 ((uint32_t)0x0000011CUL)
+#define MXC_R_GPIO_OFFS_IN_MODE_P0 ((uint32_t)0x00000140UL)
+#define MXC_R_GPIO_OFFS_IN_MODE_P1 ((uint32_t)0x00000144UL)
+#define MXC_R_GPIO_OFFS_IN_MODE_P2 ((uint32_t)0x00000148UL)
+#define MXC_R_GPIO_OFFS_IN_MODE_P3 ((uint32_t)0x0000014CUL)
+#define MXC_R_GPIO_OFFS_IN_MODE_P4 ((uint32_t)0x00000150UL)
+#define MXC_R_GPIO_OFFS_IN_MODE_P5 ((uint32_t)0x00000154UL)
+#define MXC_R_GPIO_OFFS_IN_MODE_P6 ((uint32_t)0x00000158UL)
+#define MXC_R_GPIO_OFFS_IN_MODE_P7 ((uint32_t)0x0000015CUL)
+#define MXC_R_GPIO_OFFS_IN_VAL_P0 ((uint32_t)0x00000180UL)
+#define MXC_R_GPIO_OFFS_IN_VAL_P1 ((uint32_t)0x00000184UL)
+#define MXC_R_GPIO_OFFS_IN_VAL_P2 ((uint32_t)0x00000188UL)
+#define MXC_R_GPIO_OFFS_IN_VAL_P3 ((uint32_t)0x0000018CUL)
+#define MXC_R_GPIO_OFFS_IN_VAL_P4 ((uint32_t)0x00000190UL)
+#define MXC_R_GPIO_OFFS_IN_VAL_P5 ((uint32_t)0x00000194UL)
+#define MXC_R_GPIO_OFFS_IN_VAL_P6 ((uint32_t)0x00000198UL)
+#define MXC_R_GPIO_OFFS_IN_VAL_P7 ((uint32_t)0x0000019CUL)
+#define MXC_R_GPIO_OFFS_INT_MODE_P0 ((uint32_t)0x000001C0UL)
+#define MXC_R_GPIO_OFFS_INT_MODE_P1 ((uint32_t)0x000001C4UL)
+#define MXC_R_GPIO_OFFS_INT_MODE_P2 ((uint32_t)0x000001C8UL)
+#define MXC_R_GPIO_OFFS_INT_MODE_P3 ((uint32_t)0x000001CCUL)
+#define MXC_R_GPIO_OFFS_INT_MODE_P4 ((uint32_t)0x000001D0UL)
+#define MXC_R_GPIO_OFFS_INT_MODE_P5 ((uint32_t)0x000001D4UL)
+#define MXC_R_GPIO_OFFS_INT_MODE_P6 ((uint32_t)0x000001D8UL)
+#define MXC_R_GPIO_OFFS_INT_MODE_P7 ((uint32_t)0x000001DCUL)
+#define MXC_R_GPIO_OFFS_INTFL_P0 ((uint32_t)0x00000200UL)
+#define MXC_R_GPIO_OFFS_INTFL_P1 ((uint32_t)0x00000204UL)
+#define MXC_R_GPIO_OFFS_INTFL_P2 ((uint32_t)0x00000208UL)
+#define MXC_R_GPIO_OFFS_INTFL_P3 ((uint32_t)0x0000020CUL)
+#define MXC_R_GPIO_OFFS_INTFL_P4 ((uint32_t)0x00000210UL)
+#define MXC_R_GPIO_OFFS_INTFL_P5 ((uint32_t)0x00000214UL)
+#define MXC_R_GPIO_OFFS_INTFL_P6 ((uint32_t)0x00000218UL)
+#define MXC_R_GPIO_OFFS_INTFL_P7 ((uint32_t)0x0000021CUL)
+#define MXC_R_GPIO_OFFS_INTEN_P0 ((uint32_t)0x00000240UL)
+#define MXC_R_GPIO_OFFS_INTEN_P1 ((uint32_t)0x00000244UL)
+#define MXC_R_GPIO_OFFS_INTEN_P2 ((uint32_t)0x00000248UL)
+#define MXC_R_GPIO_OFFS_INTEN_P3 ((uint32_t)0x0000024CUL)
+#define MXC_R_GPIO_OFFS_INTEN_P4 ((uint32_t)0x00000250UL)
+#define MXC_R_GPIO_OFFS_INTEN_P5 ((uint32_t)0x00000254UL)
+#define MXC_R_GPIO_OFFS_INTEN_P6 ((uint32_t)0x00000258UL)
+#define MXC_R_GPIO_OFFS_INTEN_P7 ((uint32_t)0x0000025CUL)
+
+
+/*
+ Field positions and masks for module GPIO.
+*/
+#define MXC_F_GPIO_FREE_PIN0_POS 0
+#define MXC_F_GPIO_FREE_PIN0 ((uint32_t)(0x00000001UL << MXC_F_GPIO_FREE_PIN0_POS))
+#define MXC_F_GPIO_FREE_PIN1_POS 1
+#define MXC_F_GPIO_FREE_PIN1 ((uint32_t)(0x00000001UL << MXC_F_GPIO_FREE_PIN1_POS))
+#define MXC_F_GPIO_FREE_PIN2_POS 2
+#define MXC_F_GPIO_FREE_PIN2 ((uint32_t)(0x00000001UL << MXC_F_GPIO_FREE_PIN2_POS))
+#define MXC_F_GPIO_FREE_PIN3_POS 3
+#define MXC_F_GPIO_FREE_PIN3 ((uint32_t)(0x00000001UL << MXC_F_GPIO_FREE_PIN3_POS))
+#define MXC_F_GPIO_FREE_PIN4_POS 4
+#define MXC_F_GPIO_FREE_PIN4 ((uint32_t)(0x00000001UL << MXC_F_GPIO_FREE_PIN4_POS))
+#define MXC_F_GPIO_FREE_PIN5_POS 5
+#define MXC_F_GPIO_FREE_PIN5 ((uint32_t)(0x00000001UL << MXC_F_GPIO_FREE_PIN5_POS))
+#define MXC_F_GPIO_FREE_PIN6_POS 6
+#define MXC_F_GPIO_FREE_PIN6 ((uint32_t)(0x00000001UL << MXC_F_GPIO_FREE_PIN6_POS))
+#define MXC_F_GPIO_FREE_PIN7_POS 7
+#define MXC_F_GPIO_FREE_PIN7 ((uint32_t)(0x00000001UL << MXC_F_GPIO_FREE_PIN7_POS))
+
+#define MXC_F_GPIO_OUT_MODE_PIN0_POS 0
+#define MXC_F_GPIO_OUT_MODE_PIN0 ((uint32_t)(0x0000000FUL << MXC_F_GPIO_OUT_MODE_PIN0_POS))
+#define MXC_F_GPIO_OUT_MODE_PIN1_POS 4
+#define MXC_F_GPIO_OUT_MODE_PIN1 ((uint32_t)(0x0000000FUL << MXC_F_GPIO_OUT_MODE_PIN1_POS))
+#define MXC_F_GPIO_OUT_MODE_PIN2_POS 8
+#define MXC_F_GPIO_OUT_MODE_PIN2 ((uint32_t)(0x0000000FUL << MXC_F_GPIO_OUT_MODE_PIN2_POS))
+#define MXC_F_GPIO_OUT_MODE_PIN3_POS 12
+#define MXC_F_GPIO_OUT_MODE_PIN3 ((uint32_t)(0x0000000FUL << MXC_F_GPIO_OUT_MODE_PIN3_POS))
+#define MXC_F_GPIO_OUT_MODE_PIN4_POS 16
+#define MXC_F_GPIO_OUT_MODE_PIN4 ((uint32_t)(0x0000000FUL << MXC_F_GPIO_OUT_MODE_PIN4_POS))
+#define MXC_F_GPIO_OUT_MODE_PIN5_POS 20
+#define MXC_F_GPIO_OUT_MODE_PIN5 ((uint32_t)(0x0000000FUL << MXC_F_GPIO_OUT_MODE_PIN5_POS))
+#define MXC_F_GPIO_OUT_MODE_PIN6_POS 24
+#define MXC_F_GPIO_OUT_MODE_PIN6 ((uint32_t)(0x0000000FUL << MXC_F_GPIO_OUT_MODE_PIN6_POS))
+#define MXC_F_GPIO_OUT_MODE_PIN7_POS 28
+#define MXC_F_GPIO_OUT_MODE_PIN7 ((uint32_t)(0x0000000FUL << MXC_F_GPIO_OUT_MODE_PIN7_POS))
+
+#define MXC_F_GPIO_OUT_VAL_PIN0_POS 0
+#define MXC_F_GPIO_OUT_VAL_PIN0 ((uint32_t)(0x00000001UL << MXC_F_GPIO_OUT_VAL_PIN0_POS))
+#define MXC_F_GPIO_OUT_VAL_PIN1_POS 1
+#define MXC_F_GPIO_OUT_VAL_PIN1 ((uint32_t)(0x00000001UL << MXC_F_GPIO_OUT_VAL_PIN1_POS))
+#define MXC_F_GPIO_OUT_VAL_PIN2_POS 2
+#define MXC_F_GPIO_OUT_VAL_PIN2 ((uint32_t)(0x00000001UL << MXC_F_GPIO_OUT_VAL_PIN2_POS))
+#define MXC_F_GPIO_OUT_VAL_PIN3_POS 3
+#define MXC_F_GPIO_OUT_VAL_PIN3 ((uint32_t)(0x00000001UL << MXC_F_GPIO_OUT_VAL_PIN3_POS))
+#define MXC_F_GPIO_OUT_VAL_PIN4_POS 4
+#define MXC_F_GPIO_OUT_VAL_PIN4 ((uint32_t)(0x00000001UL << MXC_F_GPIO_OUT_VAL_PIN4_POS))
+#define MXC_F_GPIO_OUT_VAL_PIN5_POS 5
+#define MXC_F_GPIO_OUT_VAL_PIN5 ((uint32_t)(0x00000001UL << MXC_F_GPIO_OUT_VAL_PIN5_POS))
+#define MXC_F_GPIO_OUT_VAL_PIN6_POS 6
+#define MXC_F_GPIO_OUT_VAL_PIN6 ((uint32_t)(0x00000001UL << MXC_F_GPIO_OUT_VAL_PIN6_POS))
+#define MXC_F_GPIO_OUT_VAL_PIN7_POS 7
+#define MXC_F_GPIO_OUT_VAL_PIN7 ((uint32_t)(0x00000001UL << MXC_F_GPIO_OUT_VAL_PIN7_POS))
+
+#define MXC_F_GPIO_FUNC_SEL_PIN0_POS 0
+#define MXC_F_GPIO_FUNC_SEL_PIN0 ((uint32_t)(0x0000000FUL << MXC_F_GPIO_FUNC_SEL_PIN0_POS))
+#define MXC_F_GPIO_FUNC_SEL_PIN1_POS 4
+#define MXC_F_GPIO_FUNC_SEL_PIN1 ((uint32_t)(0x0000000FUL << MXC_F_GPIO_FUNC_SEL_PIN1_POS))
+#define MXC_F_GPIO_FUNC_SEL_PIN2_POS 8
+#define MXC_F_GPIO_FUNC_SEL_PIN2 ((uint32_t)(0x0000000FUL << MXC_F_GPIO_FUNC_SEL_PIN2_POS))
+#define MXC_F_GPIO_FUNC_SEL_PIN3_POS 12
+#define MXC_F_GPIO_FUNC_SEL_PIN3 ((uint32_t)(0x0000000FUL << MXC_F_GPIO_FUNC_SEL_PIN3_POS))
+#define MXC_F_GPIO_FUNC_SEL_PIN4_POS 16
+#define MXC_F_GPIO_FUNC_SEL_PIN4 ((uint32_t)(0x0000000FUL << MXC_F_GPIO_FUNC_SEL_PIN4_POS))
+#define MXC_F_GPIO_FUNC_SEL_PIN5_POS 20
+#define MXC_F_GPIO_FUNC_SEL_PIN5 ((uint32_t)(0x0000000FUL << MXC_F_GPIO_FUNC_SEL_PIN5_POS))
+#define MXC_F_GPIO_FUNC_SEL_PIN6_POS 24
+#define MXC_F_GPIO_FUNC_SEL_PIN6 ((uint32_t)(0x0000000FUL << MXC_F_GPIO_FUNC_SEL_PIN6_POS))
+#define MXC_F_GPIO_FUNC_SEL_PIN7_POS 28
+#define MXC_F_GPIO_FUNC_SEL_PIN7 ((uint32_t)(0x0000000FUL << MXC_F_GPIO_FUNC_SEL_PIN7_POS))
+
+#define MXC_F_GPIO_IN_MODE_PIN0_POS 0
+#define MXC_F_GPIO_IN_MODE_PIN0 ((uint32_t)(0x00000003UL << MXC_F_GPIO_IN_MODE_PIN0_POS))
+#define MXC_F_GPIO_IN_MODE_PIN1_POS 4
+#define MXC_F_GPIO_IN_MODE_PIN1 ((uint32_t)(0x00000003UL << MXC_F_GPIO_IN_MODE_PIN1_POS))
+#define MXC_F_GPIO_IN_MODE_PIN2_POS 8
+#define MXC_F_GPIO_IN_MODE_PIN2 ((uint32_t)(0x00000003UL << MXC_F_GPIO_IN_MODE_PIN2_POS))
+#define MXC_F_GPIO_IN_MODE_PIN3_POS 12
+#define MXC_F_GPIO_IN_MODE_PIN3 ((uint32_t)(0x00000003UL << MXC_F_GPIO_IN_MODE_PIN3_POS))
+#define MXC_F_GPIO_IN_MODE_PIN4_POS 16
+#define MXC_F_GPIO_IN_MODE_PIN4 ((uint32_t)(0x00000003UL << MXC_F_GPIO_IN_MODE_PIN4_POS))
+#define MXC_F_GPIO_IN_MODE_PIN5_POS 20
+#define MXC_F_GPIO_IN_MODE_PIN5 ((uint32_t)(0x00000003UL << MXC_F_GPIO_IN_MODE_PIN5_POS))
+#define MXC_F_GPIO_IN_MODE_PIN6_POS 24
+#define MXC_F_GPIO_IN_MODE_PIN6 ((uint32_t)(0x00000003UL << MXC_F_GPIO_IN_MODE_PIN6_POS))
+#define MXC_F_GPIO_IN_MODE_PIN7_POS 28
+#define MXC_F_GPIO_IN_MODE_PIN7 ((uint32_t)(0x00000003UL << MXC_F_GPIO_IN_MODE_PIN7_POS))
+
+#define MXC_F_GPIO_IN_VAL_PIN0_POS 0
+#define MXC_F_GPIO_IN_VAL_PIN0 ((uint32_t)(0x00000001UL << MXC_F_GPIO_IN_VAL_PIN0_POS))
+#define MXC_F_GPIO_IN_VAL_PIN1_POS 1
+#define MXC_F_GPIO_IN_VAL_PIN1 ((uint32_t)(0x00000001UL << MXC_F_GPIO_IN_VAL_PIN1_POS))
+#define MXC_F_GPIO_IN_VAL_PIN2_POS 2
+#define MXC_F_GPIO_IN_VAL_PIN2 ((uint32_t)(0x00000001UL << MXC_F_GPIO_IN_VAL_PIN2_POS))
+#define MXC_F_GPIO_IN_VAL_PIN3_POS 3
+#define MXC_F_GPIO_IN_VAL_PIN3 ((uint32_t)(0x00000001UL << MXC_F_GPIO_IN_VAL_PIN3_POS))
+#define MXC_F_GPIO_IN_VAL_PIN4_POS 4
+#define MXC_F_GPIO_IN_VAL_PIN4 ((uint32_t)(0x00000001UL << MXC_F_GPIO_IN_VAL_PIN4_POS))
+#define MXC_F_GPIO_IN_VAL_PIN5_POS 5
+#define MXC_F_GPIO_IN_VAL_PIN5 ((uint32_t)(0x00000001UL << MXC_F_GPIO_IN_VAL_PIN5_POS))
+#define MXC_F_GPIO_IN_VAL_PIN6_POS 6
+#define MXC_F_GPIO_IN_VAL_PIN6 ((uint32_t)(0x00000001UL << MXC_F_GPIO_IN_VAL_PIN6_POS))
+#define MXC_F_GPIO_IN_VAL_PIN7_POS 7
+#define MXC_F_GPIO_IN_VAL_PIN7 ((uint32_t)(0x00000001UL << MXC_F_GPIO_IN_VAL_PIN7_POS))
+
+#define MXC_F_GPIO_INT_MODE_PIN0_POS 0
+#define MXC_F_GPIO_INT_MODE_PIN0 ((uint32_t)(0x00000007UL << MXC_F_GPIO_INT_MODE_PIN0_POS))
+#define MXC_F_GPIO_INT_MODE_PIN1_POS 4
+#define MXC_F_GPIO_INT_MODE_PIN1 ((uint32_t)(0x00000007UL << MXC_F_GPIO_INT_MODE_PIN1_POS))
+#define MXC_F_GPIO_INT_MODE_PIN2_POS 8
+#define MXC_F_GPIO_INT_MODE_PIN2 ((uint32_t)(0x00000007UL << MXC_F_GPIO_INT_MODE_PIN2_POS))
+#define MXC_F_GPIO_INT_MODE_PIN3_POS 12
+#define MXC_F_GPIO_INT_MODE_PIN3 ((uint32_t)(0x00000007UL << MXC_F_GPIO_INT_MODE_PIN3_POS))
+#define MXC_F_GPIO_INT_MODE_PIN4_POS 16
+#define MXC_F_GPIO_INT_MODE_PIN4 ((uint32_t)(0x00000007UL << MXC_F_GPIO_INT_MODE_PIN4_POS))
+#define MXC_F_GPIO_INT_MODE_PIN5_POS 20
+#define MXC_F_GPIO_INT_MODE_PIN5 ((uint32_t)(0x00000007UL << MXC_F_GPIO_INT_MODE_PIN5_POS))
+#define MXC_F_GPIO_INT_MODE_PIN6_POS 24
+#define MXC_F_GPIO_INT_MODE_PIN6 ((uint32_t)(0x00000007UL << MXC_F_GPIO_INT_MODE_PIN6_POS))
+#define MXC_F_GPIO_INT_MODE_PIN7_POS 28
+#define MXC_F_GPIO_INT_MODE_PIN7 ((uint32_t)(0x00000007UL << MXC_F_GPIO_INT_MODE_PIN7_POS))
+
+#define MXC_F_GPIO_INTFL_PIN0_POS 0
+#define MXC_F_GPIO_INTFL_PIN0 ((uint32_t)(0x00000001UL << MXC_F_GPIO_INTFL_PIN0_POS))
+#define MXC_F_GPIO_INTFL_PIN1_POS 1
+#define MXC_F_GPIO_INTFL_PIN1 ((uint32_t)(0x00000001UL << MXC_F_GPIO_INTFL_PIN1_POS))
+#define MXC_F_GPIO_INTFL_PIN2_POS 2
+#define MXC_F_GPIO_INTFL_PIN2 ((uint32_t)(0x00000001UL << MXC_F_GPIO_INTFL_PIN2_POS))
+#define MXC_F_GPIO_INTFL_PIN3_POS 3
+#define MXC_F_GPIO_INTFL_PIN3 ((uint32_t)(0x00000001UL << MXC_F_GPIO_INTFL_PIN3_POS))
+#define MXC_F_GPIO_INTFL_PIN4_POS 4
+#define MXC_F_GPIO_INTFL_PIN4 ((uint32_t)(0x00000001UL << MXC_F_GPIO_INTFL_PIN4_POS))
+#define MXC_F_GPIO_INTFL_PIN5_POS 5
+#define MXC_F_GPIO_INTFL_PIN5 ((uint32_t)(0x00000001UL << MXC_F_GPIO_INTFL_PIN5_POS))
+#define MXC_F_GPIO_INTFL_PIN6_POS 6
+#define MXC_F_GPIO_INTFL_PIN6 ((uint32_t)(0x00000001UL << MXC_F_GPIO_INTFL_PIN6_POS))
+#define MXC_F_GPIO_INTFL_PIN7_POS 7
+#define MXC_F_GPIO_INTFL_PIN7 ((uint32_t)(0x00000001UL << MXC_F_GPIO_INTFL_PIN7_POS))
+
+#define MXC_F_GPIO_INTEN_PIN0_POS 0
+#define MXC_F_GPIO_INTEN_PIN0 ((uint32_t)(0x00000001UL << MXC_F_GPIO_INTEN_PIN0_POS))
+#define MXC_F_GPIO_INTEN_PIN1_POS 1
+#define MXC_F_GPIO_INTEN_PIN1 ((uint32_t)(0x00000001UL << MXC_F_GPIO_INTEN_PIN1_POS))
+#define MXC_F_GPIO_INTEN_PIN2_POS 2
+#define MXC_F_GPIO_INTEN_PIN2 ((uint32_t)(0x00000001UL << MXC_F_GPIO_INTEN_PIN2_POS))
+#define MXC_F_GPIO_INTEN_PIN3_POS 3
+#define MXC_F_GPIO_INTEN_PIN3 ((uint32_t)(0x00000001UL << MXC_F_GPIO_INTEN_PIN3_POS))
+#define MXC_F_GPIO_INTEN_PIN4_POS 4
+#define MXC_F_GPIO_INTEN_PIN4 ((uint32_t)(0x00000001UL << MXC_F_GPIO_INTEN_PIN4_POS))
+#define MXC_F_GPIO_INTEN_PIN5_POS 5
+#define MXC_F_GPIO_INTEN_PIN5 ((uint32_t)(0x00000001UL << MXC_F_GPIO_INTEN_PIN5_POS))
+#define MXC_F_GPIO_INTEN_PIN6_POS 6
+#define MXC_F_GPIO_INTEN_PIN6 ((uint32_t)(0x00000001UL << MXC_F_GPIO_INTEN_PIN6_POS))
+#define MXC_F_GPIO_INTEN_PIN7_POS 7
+#define MXC_F_GPIO_INTEN_PIN7 ((uint32_t)(0x00000001UL << MXC_F_GPIO_INTEN_PIN7_POS))
+
+
+/*
+ Field values and shifted values for module GPIO.
+*/
+#define MXC_V_GPIO_FREE_PIN0_NOT_AVAILABLE ((uint32_t)(0x0x00000000UL))
+#define MXC_V_GPIO_FREE_PIN0_AVAILABLE ((uint32_t)(0x0x00000001UL))
+
+#define MXC_S_GPIO_FREE_PIN0_NOT_AVAILABLE ((uint32_t)(MXC_V_GPIO_FREE_PIN0_NOT_AVAILABLE << MXC_F_GPIO_FREE_PIN0_POS))
+#define MXC_S_GPIO_FREE_PIN0_AVAILABLE ((uint32_t)(MXC_V_GPIO_FREE_PIN0_AVAILABLE << MXC_F_GPIO_FREE_PIN0_POS))
+
+#define MXC_V_GPIO_FREE_PIN1_NOT_AVAILABLE ((uint32_t)(0x0x00000000UL))
+#define MXC_V_GPIO_FREE_PIN1_AVAILABLE ((uint32_t)(0x0x00000001UL))
+
+#define MXC_S_GPIO_FREE_PIN1_NOT_AVAILABLE ((uint32_t)(MXC_V_GPIO_FREE_PIN1_NOT_AVAILABLE << MXC_F_GPIO_FREE_PIN1_POS))
+#define MXC_S_GPIO_FREE_PIN1_AVAILABLE ((uint32_t)(MXC_V_GPIO_FREE_PIN1_AVAILABLE << MXC_F_GPIO_FREE_PIN1_POS))
+
+#define MXC_V_GPIO_FREE_PIN2_NOT_AVAILABLE ((uint32_t)(0x0x00000000UL))
+#define MXC_V_GPIO_FREE_PIN2_AVAILABLE ((uint32_t)(0x0x00000001UL))
+
+#define MXC_S_GPIO_FREE_PIN2_NOT_AVAILABLE ((uint32_t)(MXC_V_GPIO_FREE_PIN2_NOT_AVAILABLE << MXC_F_GPIO_FREE_PIN2_POS))
+#define MXC_S_GPIO_FREE_PIN2_AVAILABLE ((uint32_t)(MXC_V_GPIO_FREE_PIN2_AVAILABLE << MXC_F_GPIO_FREE_PIN2_POS))
+
+#define MXC_V_GPIO_FREE_PIN3_NOT_AVAILABLE ((uint32_t)(0x0x00000000UL))
+#define MXC_V_GPIO_FREE_PIN3_AVAILABLE ((uint32_t)(0x0x00000001UL))
+
+#define MXC_S_GPIO_FREE_PIN3_NOT_AVAILABLE ((uint32_t)(MXC_V_GPIO_FREE_PIN3_NOT_AVAILABLE << MXC_F_GPIO_FREE_PIN3_POS))
+#define MXC_S_GPIO_FREE_PIN3_AVAILABLE ((uint32_t)(MXC_V_GPIO_FREE_PIN3_AVAILABLE << MXC_F_GPIO_FREE_PIN3_POS))
+
+#define MXC_V_GPIO_FREE_PIN4_NOT_AVAILABLE ((uint32_t)(0x0x00000000UL))
+#define MXC_V_GPIO_FREE_PIN4_AVAILABLE ((uint32_t)(0x0x00000001UL))
+
+#define MXC_S_GPIO_FREE_PIN4_NOT_AVAILABLE ((uint32_t)(MXC_V_GPIO_FREE_PIN4_NOT_AVAILABLE << MXC_F_GPIO_FREE_PIN4_POS))
+#define MXC_S_GPIO_FREE_PIN4_AVAILABLE ((uint32_t)(MXC_V_GPIO_FREE_PIN4_AVAILABLE << MXC_F_GPIO_FREE_PIN4_POS))
+
+#define MXC_V_GPIO_FREE_PIN5_NOT_AVAILABLE ((uint32_t)(0x0x00000000UL))
+#define MXC_V_GPIO_FREE_PIN5_AVAILABLE ((uint32_t)(0x0x00000001UL))
+
+#define MXC_S_GPIO_FREE_PIN5_NOT_AVAILABLE ((uint32_t)(MXC_V_GPIO_FREE_PIN5_NOT_AVAILABLE << MXC_F_GPIO_FREE_PIN5_POS))
+#define MXC_S_GPIO_FREE_PIN5_AVAILABLE ((uint32_t)(MXC_V_GPIO_FREE_PIN5_AVAILABLE << MXC_F_GPIO_FREE_PIN5_POS))
+
+#define MXC_V_GPIO_FREE_PIN6_NOT_AVAILABLE ((uint32_t)(0x0x00000000UL))
+#define MXC_V_GPIO_FREE_PIN6_AVAILABLE ((uint32_t)(0x0x00000001UL))
+
+#define MXC_S_GPIO_FREE_PIN6_NOT_AVAILABLE ((uint32_t)(MXC_V_GPIO_FREE_PIN6_NOT_AVAILABLE << MXC_F_GPIO_FREE_PIN6_POS))
+#define MXC_S_GPIO_FREE_PIN6_AVAILABLE ((uint32_t)(MXC_V_GPIO_FREE_PIN6_AVAILABLE << MXC_F_GPIO_FREE_PIN6_POS))
+
+#define MXC_V_GPIO_FREE_PIN7_NOT_AVAILABLE ((uint32_t)(0x0x00000000UL))
+#define MXC_V_GPIO_FREE_PIN7_AVAILABLE ((uint32_t)(0x0x00000001UL))
+
+#define MXC_S_GPIO_FREE_PIN7_NOT_AVAILABLE ((uint32_t)(MXC_V_GPIO_FREE_PIN7_NOT_AVAILABLE << MXC_F_GPIO_FREE_PIN7_POS))
+#define MXC_S_GPIO_FREE_PIN7_AVAILABLE ((uint32_t)(MXC_V_GPIO_FREE_PIN7_AVAILABLE << MXC_F_GPIO_FREE_PIN7_POS))
+
+#define MXC_V_GPIO_OUT_MODE_HIGH_Z_WEAK_PULLUP ((uint32_t)(0x00000000UL))
+#define MXC_V_GPIO_OUT_MODE_OPEN_DRAIN ((uint32_t)(0x00000001UL))
+#define MXC_V_GPIO_OUT_MODE_OPEN_DRAIN_WEAK_PULLUP ((uint32_t)(0x00000002UL))
+#define MXC_V_GPIO_OUT_MODE_HIGH_Z ((uint32_t)(0x00000003UL))
+#define MXC_V_GPIO_OUT_MODE_NORMAL_HIGH_Z ((uint32_t)(0x00000004UL))
+#define MXC_V_GPIO_OUT_MODE_NORMAL_DRIVE ((uint32_t)(0x00000005UL))
+#define MXC_V_GPIO_OUT_MODE_SLOW_HIGH_Z ((uint32_t)(0x00000006UL))
+#define MXC_V_GPIO_OUT_MODE_SLOW_DRIVE ((uint32_t)(0x00000007UL))
+#define MXC_V_GPIO_OUT_MODE_FAST_HIGH_Z ((uint32_t)(0x00000008UL))
+#define MXC_V_GPIO_OUT_MODE_FAST_DRIVE ((uint32_t)(0x00000009UL))
+
+#define MXC_S_GPIO_OUT_MODE_PIN0_HIGH_Z_WEAK_PULLUP ((uint32_t)(MXC_V_GPIO_OUT_MODE_HIGH_Z_WEAK_PULLUP << MXC_F_GPIO_OUT_MODE_PIN0_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN0_OPEN_DRAIN ((uint32_t)(MXC_V_GPIO_OUT_MODE_OPEN_DRAIN << MXC_F_GPIO_OUT_MODE_PIN0_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN0_OPEN_DRAIN_WEAK_PULLUP ((uint32_t)(MXC_V_GPIO_OUT_MODE_OPEN_DRAIN_WEAK_PULLUP << MXC_F_GPIO_OUT_MODE_PIN0_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN0_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN0_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN0_NORMAL_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_NORMAL_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN0_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN0_NORMAL_DRIVE ((uint32_t)(MXC_V_GPIO_OUT_MODE_NORMAL_DRIVE << MXC_F_GPIO_OUT_MODE_PIN0_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN0_SLOW_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_SLOW_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN0_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN0_SLOW_DRIVE ((uint32_t)(MXC_V_GPIO_OUT_MODE_SLOW_DRIVE << MXC_F_GPIO_OUT_MODE_PIN0_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN0_FAST_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_FAST_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN0_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN0_FAST_DRIVE ((uint32_t)(MXC_V_GPIO_OUT_MODE_FAST_DRIVE << MXC_F_GPIO_OUT_MODE_PIN0_POS))
+
+#define MXC_S_GPIO_OUT_MODE_PIN1_HIGH_Z_WEAK_PULLUP ((uint32_t)(MXC_V_GPIO_OUT_MODE_HIGH_Z_WEAK_PULLUP << MXC_F_GPIO_OUT_MODE_PIN1_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN1_OPEN_DRAIN ((uint32_t)(MXC_V_GPIO_OUT_MODE_OPEN_DRAIN << MXC_F_GPIO_OUT_MODE_PIN1_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN1_OPEN_DRAIN_WEAK_PULLUP ((uint32_t)(MXC_V_GPIO_OUT_MODE_OPEN_DRAIN_WEAK_PULLUP << MXC_F_GPIO_OUT_MODE_PIN1_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN1_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN1_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN1_NORMAL_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_NORMAL_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN1_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN1_NORMAL_DRIVE ((uint32_t)(MXC_V_GPIO_OUT_MODE_NORMAL_DRIVE << MXC_F_GPIO_OUT_MODE_PIN1_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN1_SLOW_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_SLOW_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN1_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN1_SLOW_DRIVE ((uint32_t)(MXC_V_GPIO_OUT_MODE_SLOW_DRIVE << MXC_F_GPIO_OUT_MODE_PIN1_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN1_FAST_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_FAST_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN1_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN1_FAST_DRIVE ((uint32_t)(MXC_V_GPIO_OUT_MODE_FAST_DRIVE << MXC_F_GPIO_OUT_MODE_PIN1_POS))
+
+#define MXC_S_GPIO_OUT_MODE_PIN2_HIGH_Z_WEAK_PULLUP ((uint32_t)(MXC_V_GPIO_OUT_MODE_HIGH_Z_WEAK_PULLUP << MXC_F_GPIO_OUT_MODE_PIN2_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN2_OPEN_DRAIN ((uint32_t)(MXC_V_GPIO_OUT_MODE_OPEN_DRAIN << MXC_F_GPIO_OUT_MODE_PIN2_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN2_OPEN_DRAIN_WEAK_PULLUP ((uint32_t)(MXC_V_GPIO_OUT_MODE_OPEN_DRAIN_WEAK_PULLUP << MXC_F_GPIO_OUT_MODE_PIN2_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN2_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN2_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN2_NORMAL_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_NORMAL_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN2_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN2_NORMAL_DRIVE ((uint32_t)(MXC_V_GPIO_OUT_MODE_NORMAL_DRIVE << MXC_F_GPIO_OUT_MODE_PIN2_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN2_SLOW_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_SLOW_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN2_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN2_SLOW_DRIVE ((uint32_t)(MXC_V_GPIO_OUT_MODE_SLOW_DRIVE << MXC_F_GPIO_OUT_MODE_PIN2_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN2_FAST_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_FAST_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN2_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN2_FAST_DRIVE ((uint32_t)(MXC_V_GPIO_OUT_MODE_FAST_DRIVE << MXC_F_GPIO_OUT_MODE_PIN2_POS))
+
+#define MXC_S_GPIO_OUT_MODE_PIN3_HIGH_Z_WEAK_PULLUP ((uint32_t)(MXC_V_GPIO_OUT_MODE_HIGH_Z_WEAK_PULLUP << MXC_F_GPIO_OUT_MODE_PIN3_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN3_OPEN_DRAIN ((uint32_t)(MXC_V_GPIO_OUT_MODE_OPEN_DRAIN << MXC_F_GPIO_OUT_MODE_PIN3_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN3_OPEN_DRAIN_WEAK_PULLUP ((uint32_t)(MXC_V_GPIO_OUT_MODE_OPEN_DRAIN_WEAK_PULLUP << MXC_F_GPIO_OUT_MODE_PIN3_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN3_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN3_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN3_NORMAL_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_NORMAL_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN3_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN3_NORMAL_DRIVE ((uint32_t)(MXC_V_GPIO_OUT_MODE_NORMAL_DRIVE << MXC_F_GPIO_OUT_MODE_PIN3_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN3_SLOW_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_SLOW_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN3_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN3_SLOW_DRIVE ((uint32_t)(MXC_V_GPIO_OUT_MODE_SLOW_DRIVE << MXC_F_GPIO_OUT_MODE_PIN3_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN3_FAST_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_FAST_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN3_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN3_FAST_DRIVE ((uint32_t)(MXC_V_GPIO_OUT_MODE_FAST_DRIVE << MXC_F_GPIO_OUT_MODE_PIN3_POS))
+
+#define MXC_S_GPIO_OUT_MODE_PIN4_HIGH_Z_WEAK_PULLUP ((uint32_t)(MXC_V_GPIO_OUT_MODE_HIGH_Z_WEAK_PULLUP << MXC_F_GPIO_OUT_MODE_PIN4_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN4_OPEN_DRAIN ((uint32_t)(MXC_V_GPIO_OUT_MODE_OPEN_DRAIN << MXC_F_GPIO_OUT_MODE_PIN4_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN4_OPEN_DRAIN_WEAK_PULLUP ((uint32_t)(MXC_V_GPIO_OUT_MODE_OPEN_DRAIN_WEAK_PULLUP << MXC_F_GPIO_OUT_MODE_PIN4_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN4_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN4_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN4_NORMAL_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_NORMAL_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN4_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN4_NORMAL_DRIVE ((uint32_t)(MXC_V_GPIO_OUT_MODE_NORMAL_DRIVE << MXC_F_GPIO_OUT_MODE_PIN4_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN4_SLOW_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_SLOW_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN4_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN4_SLOW_DRIVE ((uint32_t)(MXC_V_GPIO_OUT_MODE_SLOW_DRIVE << MXC_F_GPIO_OUT_MODE_PIN4_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN4_FAST_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_FAST_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN4_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN4_FAST_DRIVE ((uint32_t)(MXC_V_GPIO_OUT_MODE_FAST_DRIVE << MXC_F_GPIO_OUT_MODE_PIN4_POS))
+
+#define MXC_S_GPIO_OUT_MODE_PIN5_HIGH_Z_WEAK_PULLUP ((uint32_t)(MXC_V_GPIO_OUT_MODE_HIGH_Z_WEAK_PULLUP << MXC_F_GPIO_OUT_MODE_PIN5_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN5_OPEN_DRAIN ((uint32_t)(MXC_V_GPIO_OUT_MODE_OPEN_DRAIN << MXC_F_GPIO_OUT_MODE_PIN5_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN5_OPEN_DRAIN_WEAK_PULLUP ((uint32_t)(MXC_V_GPIO_OUT_MODE_OPEN_DRAIN_WEAK_PULLUP << MXC_F_GPIO_OUT_MODE_PIN5_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN5_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN5_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN5_NORMAL_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_NORMAL_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN5_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN5_NORMAL_DRIVE ((uint32_t)(MXC_V_GPIO_OUT_MODE_NORMAL_DRIVE << MXC_F_GPIO_OUT_MODE_PIN5_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN5_SLOW_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_SLOW_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN5_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN5_SLOW_DRIVE ((uint32_t)(MXC_V_GPIO_OUT_MODE_SLOW_DRIVE << MXC_F_GPIO_OUT_MODE_PIN5_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN5_FAST_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_FAST_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN5_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN5_FAST_DRIVE ((uint32_t)(MXC_V_GPIO_OUT_MODE_FAST_DRIVE << MXC_F_GPIO_OUT_MODE_PIN5_POS))
+
+#define MXC_S_GPIO_OUT_MODE_PIN6_HIGH_Z_WEAK_PULLUP ((uint32_t)(MXC_V_GPIO_OUT_MODE_HIGH_Z_WEAK_PULLUP << MXC_F_GPIO_OUT_MODE_PIN6_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN6_OPEN_DRAIN ((uint32_t)(MXC_V_GPIO_OUT_MODE_OPEN_DRAIN << MXC_F_GPIO_OUT_MODE_PIN6_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN6_OPEN_DRAIN_WEAK_PULLUP ((uint32_t)(MXC_V_GPIO_OUT_MODE_OPEN_DRAIN_WEAK_PULLUP << MXC_F_GPIO_OUT_MODE_PIN6_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN6_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN6_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN6_NORMAL_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_NORMAL_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN6_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN6_NORMAL_DRIVE ((uint32_t)(MXC_V_GPIO_OUT_MODE_NORMAL_DRIVE << MXC_F_GPIO_OUT_MODE_PIN6_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN6_SLOW_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_SLOW_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN6_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN6_SLOW_DRIVE ((uint32_t)(MXC_V_GPIO_OUT_MODE_SLOW_DRIVE << MXC_F_GPIO_OUT_MODE_PIN6_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN6_FAST_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_FAST_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN6_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN6_FAST_DRIVE ((uint32_t)(MXC_V_GPIO_OUT_MODE_FAST_DRIVE << MXC_F_GPIO_OUT_MODE_PIN6_POS))
+
+#define MXC_S_GPIO_OUT_MODE_PIN7_HIGH_Z_WEAK_PULLUP ((uint32_t)(MXC_V_GPIO_OUT_MODE_HIGH_Z_WEAK_PULLUP << MXC_F_GPIO_OUT_MODE_PIN7_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN7_OPEN_DRAIN ((uint32_t)(MXC_V_GPIO_OUT_MODE_OPEN_DRAIN << MXC_F_GPIO_OUT_MODE_PIN7_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN7_OPEN_DRAIN_WEAK_PULLUP ((uint32_t)(MXC_V_GPIO_OUT_MODE_OPEN_DRAIN_WEAK_PULLUP << MXC_F_GPIO_OUT_MODE_PIN7_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN7_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN7_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN7_NORMAL_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_NORMAL_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN7_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN7_NORMAL_DRIVE ((uint32_t)(MXC_V_GPIO_OUT_MODE_NORMAL_DRIVE << MXC_F_GPIO_OUT_MODE_PIN7_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN7_SLOW_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_SLOW_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN7_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN7_SLOW_DRIVE ((uint32_t)(MXC_V_GPIO_OUT_MODE_SLOW_DRIVE << MXC_F_GPIO_OUT_MODE_PIN7_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN7_FAST_HIGH_Z ((uint32_t)(MXC_V_GPIO_OUT_MODE_FAST_HIGH_Z << MXC_F_GPIO_OUT_MODE_PIN7_POS))
+#define MXC_S_GPIO_OUT_MODE_PIN7_FAST_DRIVE ((uint32_t)(MXC_V_GPIO_OUT_MODE_FAST_DRIVE << MXC_F_GPIO_OUT_MODE_PIN7_POS))
+
+#define MXC_V_GPIO_INT_MODE_DISABLED ((uint32_t)(0x00000000UL))
+#define MXC_V_GPIO_INT_MODE_FALLING_EDGE ((uint32_t)(0x00000001UL))
+#define MXC_V_GPIO_INT_MODE_RISING_EDGE ((uint32_t)(0x00000002UL))
+#define MXC_V_GPIO_INT_MODE_BOTH_EDGES ((uint32_t)(0x00000003UL))
+#define MXC_V_GPIO_INT_MODE_LOW_LEVEL ((uint32_t)(0x00000004UL))
+#define MXC_V_GPIO_INT_MODE_HIGH_LEVEL ((uint32_t)(0x00000005UL))
+
+#ifdef __cplusplus
+}
+#endif
+
+/**
+* @}
+*/
+
+#endif /* _MXC_GPIO_REGS_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/i2cm_regs.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,192 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef _MXC_I2CM_REGS_H_
+#define _MXC_I2CM_REGS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/**
+ * @file i2cm_regs.h
+ * @addtogroup i2cm I2CM
+ * @{
+ */
+
+/* Offset Register Description
+ ====== ================================================ */
+typedef struct {
+ __IO uint32_t fs_clk_div; /* 0x0000 Full Speed SCL Clock Settings */
+ __IO uint32_t hs_clk_div; /* 0x0004 High Speed SCL Clock Settings */
+ __I uint32_t rsv0008; /* 0x0008 */
+ __IO uint32_t timeout; /* 0x000C [TO_CNTL] Timeout and Auto-Stop Settings */
+ __IO uint32_t ctrl; /* 0x0010 [EN_CNTL] I2C Master Control Register */
+ __IO uint32_t trans; /* 0x0014 [MSTR_CNTL] I2C Master Tx Start and Status Flags */
+ __IO uint32_t intfl; /* 0x0018 Interrupt Flags */
+ __IO uint32_t inten; /* 0x001C Interrupt Enable/Disable Controls */
+ __I uint32_t rsv0020[2]; /* 0x0020 */
+ __IO uint32_t bb; /* 0x0028 Bit-Bang Control Register */
+} mxc_i2cm_regs_t;
+
+/* Offset Register Description
+ ====== ================================================ */
+typedef struct {
+ __IO uint32_t trans[512]; /* 0x0000 I2C Master Transaction FIFO */
+ __IO uint32_t rslts[512]; /* 0x0800 I2C Master Results FIFO */
+} mxc_i2cm_fifo_regs_t;
+
+/*
+ Register offsets for module I2CM.
+*/
+#define MXC_R_I2CM_OFFS_FS_CLK_DIV ((uint32_t)0x00000000UL)
+#define MXC_R_I2CM_OFFS_HS_CLK_DIV ((uint32_t)0x00000004UL)
+#define MXC_R_I2CM_OFFS_TIMEOUT ((uint32_t)0x0000000CUL)
+#define MXC_R_I2CM_OFFS_CTRL ((uint32_t)0x00000010UL)
+#define MXC_R_I2CM_OFFS_TRANS ((uint32_t)0x00000014UL)
+#define MXC_R_I2CM_OFFS_INTFL ((uint32_t)0x00000018UL)
+#define MXC_R_I2CM_OFFS_INTEN ((uint32_t)0x0000001CUL)
+#define MXC_R_I2CM_OFFS_BB ((uint32_t)0x00000028UL)
+#define MXC_R_I2CM_OFFS_AHB_RETRY ((uint32_t)0x00000030UL)
+
+#define MXC_R_I2CM_FIFO_OFFS_TRANS ((uint32_t)0x00000000UL)
+#define MXC_R_I2CM_FIFO_OFFS_RSLTS ((uint32_t)0x00000800UL)
+
+/*
+ Field positions and masks for module I2CM.
+*/
+#define MXC_S_I2CM_TRANS_TAG_START 0x000
+#define MXC_S_I2CM_TRANS_TAG_TXDATA_ACK 0x100
+#define MXC_S_I2CM_TRANS_TAG_TXDATA_NACK 0x200
+#define MXC_S_I2CM_TRANS_TAG_RXDATA_COUNT 0x400
+#define MXC_S_I2CM_TRANS_TAG_RXDATA_NACK 0x500
+#define MXC_S_I2CM_TRANS_TAG_STOP 0x700
+#define MXC_S_I2CM_RSTLS_TAG_DATA 0x100
+#define MXC_S_I2CM_RSTLS_TAG_EMPTY 0x200
+
+#define MXC_F_I2CM_CLK_DIV_FILTER_CLK_DIV_POS 0
+#define MXC_F_I2CM_CLK_DIV_FILTER_CLK_DIV ((uint32_t)(0x000000FFUL << MXC_F_I2CM_CLK_DIV_FILTER_CLK_DIV_POS))
+#define MXC_F_I2CM_CLK_DIV_SCL_LO_CNT_POS 8
+#define MXC_F_I2CM_CLK_DIV_SCL_LO_CNT ((uint32_t)(0x00000FFFUL << MXC_F_I2CM_CLK_DIV_SCL_LO_CNT_POS))
+#define MXC_F_I2CM_CLK_DIV_SCL_HI_CNT_POS 20
+#define MXC_F_I2CM_CLK_DIV_SCL_HI_CNT ((uint32_t)(0x00000FFFUL << MXC_F_I2CM_CLK_DIV_SCL_HI_CNT_POS))
+
+#define MXC_F_I2CM_TIMEOUT_TX_TIMEOUT_POS 16
+#define MXC_F_I2CM_TIMEOUT_TX_TIMEOUT ((uint32_t)(0x000000FFUL << MXC_F_I2CM_TIMEOUT_TX_TIMEOUT_POS))
+#define MXC_F_I2CM_TIMEOUT_AUTO_STOP_EN_POS 24
+#define MXC_F_I2CM_TIMEOUT_AUTO_STOP_EN ((uint32_t)(0x00000001UL << MXC_F_I2CM_TIMEOUT_AUTO_STOP_EN_POS))
+
+#define MXC_F_I2CM_CTRL_TX_FIFO_EN_POS 2
+#define MXC_F_I2CM_CTRL_TX_FIFO_EN ((uint32_t)(0x00000001UL << MXC_F_I2CM_CTRL_TX_FIFO_EN_POS))
+#define MXC_F_I2CM_CTRL_RX_FIFO_EN_POS 3
+#define MXC_F_I2CM_CTRL_RX_FIFO_EN ((uint32_t)(0x00000001UL << MXC_F_I2CM_CTRL_RX_FIFO_EN_POS))
+#define MXC_F_I2CM_CTRL_MSTR_RESET_EN_POS 7
+#define MXC_F_I2CM_CTRL_MSTR_RESET_EN ((uint32_t)(0x00000001UL << MXC_F_I2CM_CTRL_MSTR_RESET_EN_POS))
+
+#define MXC_F_I2CM_TRANS_TX_START_POS 0
+#define MXC_F_I2CM_TRANS_TX_START ((uint32_t)(0x00000001UL << MXC_F_I2CM_TRANS_TX_START_POS))
+#define MXC_F_I2CM_TRANS_TX_IN_PROGRESS_POS 1
+#define MXC_F_I2CM_TRANS_TX_IN_PROGRESS ((uint32_t)(0x00000001UL << MXC_F_I2CM_TRANS_TX_IN_PROGRESS_POS))
+#define MXC_F_I2CM_TRANS_TX_DONE_POS 2
+#define MXC_F_I2CM_TRANS_TX_DONE ((uint32_t)(0x00000001UL << MXC_F_I2CM_TRANS_TX_DONE_POS))
+#define MXC_F_I2CM_TRANS_TX_NACKED_POS 3
+#define MXC_F_I2CM_TRANS_TX_NACKED ((uint32_t)(0x00000001UL << MXC_F_I2CM_TRANS_TX_NACKED_POS))
+#define MXC_F_I2CM_TRANS_TX_LOST_ARBITR_POS 4
+#define MXC_F_I2CM_TRANS_TX_LOST_ARBITR ((uint32_t)(0x00000001UL << MXC_F_I2CM_TRANS_TX_LOST_ARBITR_POS))
+#define MXC_F_I2CM_TRANS_TX_TIMEOUT_POS 5
+#define MXC_F_I2CM_TRANS_TX_TIMEOUT ((uint32_t)(0x00000001UL << MXC_F_I2CM_TRANS_TX_TIMEOUT_POS))
+
+#define MXC_F_I2CM_INTFL_TX_DONE_POS 0
+#define MXC_F_I2CM_INTFL_TX_DONE ((uint32_t)(0x00000001UL << MXC_F_I2CM_INTFL_TX_DONE_POS))
+#define MXC_F_I2CM_INTFL_TX_NACKED_POS 1
+#define MXC_F_I2CM_INTFL_TX_NACKED ((uint32_t)(0x00000001UL << MXC_F_I2CM_INTFL_TX_NACKED_POS))
+#define MXC_F_I2CM_INTFL_TX_LOST_ARBITR_POS 2
+#define MXC_F_I2CM_INTFL_TX_LOST_ARBITR ((uint32_t)(0x00000001UL << MXC_F_I2CM_INTFL_TX_LOST_ARBITR_POS))
+#define MXC_F_I2CM_INTFL_TX_TIMEOUT_POS 3
+#define MXC_F_I2CM_INTFL_TX_TIMEOUT ((uint32_t)(0x00000001UL << MXC_F_I2CM_INTFL_TX_TIMEOUT_POS))
+#define MXC_F_I2CM_INTFL_TX_FIFO_EMPTY_POS 4
+#define MXC_F_I2CM_INTFL_TX_FIFO_EMPTY ((uint32_t)(0x00000001UL << MXC_F_I2CM_INTFL_TX_FIFO_EMPTY_POS))
+#define MXC_F_I2CM_INTFL_TX_FIFO_3Q_EMPTY_POS 5
+#define MXC_F_I2CM_INTFL_TX_FIFO_3Q_EMPTY ((uint32_t)(0x00000001UL << MXC_F_I2CM_INTFL_TX_FIFO_3Q_EMPTY_POS))
+#define MXC_F_I2CM_INTFL_RX_FIFO_NOT_EMPTY_POS 6
+#define MXC_F_I2CM_INTFL_RX_FIFO_NOT_EMPTY ((uint32_t)(0x00000001UL << MXC_F_I2CM_INTFL_RX_FIFO_NOT_EMPTY_POS))
+#define MXC_F_I2CM_INTFL_RX_FIFO_2Q_FULL_POS 7
+#define MXC_F_I2CM_INTFL_RX_FIFO_2Q_FULL ((uint32_t)(0x00000001UL << MXC_F_I2CM_INTFL_RX_FIFO_2Q_FULL_POS))
+#define MXC_F_I2CM_INTFL_RX_FIFO_3Q_FULL_POS 8
+#define MXC_F_I2CM_INTFL_RX_FIFO_3Q_FULL ((uint32_t)(0x00000001UL << MXC_F_I2CM_INTFL_RX_FIFO_3Q_FULL_POS))
+#define MXC_F_I2CM_INTFL_RX_FIFO_FULL_POS 9
+#define MXC_F_I2CM_INTFL_RX_FIFO_FULL ((uint32_t)(0x00000001UL << MXC_F_I2CM_INTFL_RX_FIFO_FULL_POS))
+
+#define MXC_F_I2CM_INTEN_TX_DONE_POS 0
+#define MXC_F_I2CM_INTEN_TX_DONE ((uint32_t)(0x00000001UL << MXC_F_I2CM_INTEN_TX_DONE_POS))
+#define MXC_F_I2CM_INTEN_TX_NACKED_POS 1
+#define MXC_F_I2CM_INTEN_TX_NACKED ((uint32_t)(0x00000001UL << MXC_F_I2CM_INTEN_TX_NACKED_POS))
+#define MXC_F_I2CM_INTEN_TX_LOST_ARBITR_POS 2
+#define MXC_F_I2CM_INTEN_TX_LOST_ARBITR ((uint32_t)(0x00000001UL << MXC_F_I2CM_INTEN_TX_LOST_ARBITR_POS))
+#define MXC_F_I2CM_INTEN_TX_TIMEOUT_POS 3
+#define MXC_F_I2CM_INTEN_TX_TIMEOUT ((uint32_t)(0x00000001UL << MXC_F_I2CM_INTEN_TX_TIMEOUT_POS))
+#define MXC_F_I2CM_INTEN_TX_FIFO_EMPTY_POS 4
+#define MXC_F_I2CM_INTEN_TX_FIFO_EMPTY ((uint32_t)(0x00000001UL << MXC_F_I2CM_INTEN_TX_FIFO_EMPTY_POS))
+#define MXC_F_I2CM_INTEN_TX_FIFO_3Q_EMPTY_POS 5
+#define MXC_F_I2CM_INTEN_TX_FIFO_3Q_EMPTY ((uint32_t)(0x00000001UL << MXC_F_I2CM_INTEN_TX_FIFO_3Q_EMPTY_POS))
+#define MXC_F_I2CM_INTEN_RX_FIFO_EMPTY_POS 6
+#define MXC_F_I2CM_INTEN_RX_FIFO_EMPTY ((uint32_t)(0x00000001UL << MXC_F_I2CM_INTEN_RX_FIFO_EMPTY_POS))
+#define MXC_F_I2CM_INTEN_RX_FIFO_2Q_FULL_POS 7
+#define MXC_F_I2CM_INTEN_RX_FIFO_2Q_FULL ((uint32_t)(0x00000001UL << MXC_F_I2CM_INTEN_RX_FIFO_2Q_FULL_POS))
+#define MXC_F_I2CM_INTEN_RX_FIFO_3Q_FULL_POS 8
+#define MXC_F_I2CM_INTEN_RX_FIFO_3Q_FULL ((uint32_t)(0x00000001UL << MXC_F_I2CM_INTEN_RX_FIFO_3Q_FULL_POS))
+#define MXC_F_I2CM_INTEN_RX_FIFO_FULL_POS 9
+#define MXC_F_I2CM_INTEN_RX_FIFO_FULL ((uint32_t)(0x00000001UL << MXC_F_I2CM_INTEN_RX_FIFO_FULL_POS))
+
+#define MXC_F_I2CM_BB_BB_SCL_OUT_POS 0
+#define MXC_F_I2CM_BB_BB_SCL_OUT ((uint32_t)(0x00000001UL << MXC_F_I2CM_BB_BB_SCL_OUT_POS))
+#define MXC_F_I2CM_BB_BB_SDA_OUT_POS 1
+#define MXC_F_I2CM_BB_BB_SDA_OUT ((uint32_t)(0x00000001UL << MXC_F_I2CM_BB_BB_SDA_OUT_POS))
+#define MXC_F_I2CM_BB_BB_SCL_IN_VAL_POS 2
+#define MXC_F_I2CM_BB_BB_SCL_IN_VAL ((uint32_t)(0x00000001UL << MXC_F_I2CM_BB_BB_SCL_IN_VAL_POS))
+#define MXC_F_I2CM_BB_BB_SDA_IN_VAL_POS 3
+#define MXC_F_I2CM_BB_BB_SDA_IN_VAL ((uint32_t)(0x00000001UL << MXC_F_I2CM_BB_BB_SDA_IN_VAL_POS))
+#define MXC_F_I2CM_BB_RX_FIFO_CNT_POS 16
+#define MXC_F_I2CM_BB_RX_FIFO_CNT ((uint32_t)(0x0000001FUL << MXC_F_I2CM_BB_RX_FIFO_CNT_POS))
+
+#ifdef __cplusplus
+}
+#endif
+
+/**
+* @}
+*/
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/icc_regs.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,96 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef _MXC_ICC_REGS_H_
+#define _MXC_ICC_REGS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/**
+ * @file icc_regs.h
+ * @addtogroup icc ICC
+ * @{
+ */
+
+/* Offset Register Description
+ ====== =================================================== */
+typedef struct {
+ __IO uint32_t id; /* 0x0000 Device ID Register */
+ __IO uint32_t mem_cfg; /* 0x0004 Memory Configuration */
+ __I uint32_t rsv0008[62]; /* 0x0008 */
+ __IO uint32_t ctrl_stat; /* 0x0100 Control and Status */
+ __I uint32_t rsv0104[383]; /* 0x0104 */
+ __IO uint32_t invdt_all; /* 0x0700 Invalidate (Clear) Cache Control */
+} mxc_icc_regs_t;
+
+/*
+ Register offsets for module ICC.
+*/
+#define MXC_R_ICC_OFFS_ID ((uint32_t)0x00000000UL)
+#define MXC_R_ICC_OFFS_MEM_CFG ((uint32_t)0x00000004UL)
+#define MXC_R_ICC_OFFS_CTRL_STAT ((uint32_t)0x00000100UL)
+#define MXC_R_ICC_OFFS_INVDT_ALL ((uint32_t)0x00000700UL)
+
+/*
+ Field positions and masks for module ICC.
+*/
+#define MXC_F_ICC_ID_RTL_VERSION_POS 0
+#define MXC_F_ICC_ID_RTL_VERSION ((uint32_t)(0x0000003FUL << MXC_F_ICC_ID_RTL_VERSION_POS))
+#define MXC_F_ICC_ID_PART_NUM_POS 6
+#define MXC_F_ICC_ID_PART_NUM ((uint32_t)(0x0000000FUL << MXC_F_ICC_ID_PART_NUM_POS))
+#define MXC_F_ICC_ID_CACHE_ID_POS 10
+#define MXC_F_ICC_ID_CACHE_ID ((uint32_t)(0x0000003FUL << MXC_F_ICC_ID_CACHE_ID_POS))
+
+#define MXC_F_ICC_MEM_CFG_CACHE_SIZE_POS 0
+#define MXC_F_ICC_MEM_CFG_CACHE_SIZE ((uint32_t)(0x0000FFFFUL << MXC_F_ICC_MEM_CFG_CACHE_SIZE_POS))
+#define MXC_F_ICC_MEM_CFG_MAIN_MEMORY_SIZE_POS 16
+#define MXC_F_ICC_MEM_CFG_MAIN_MEMORY_SIZE ((uint32_t)(0x0000FFFFUL << MXC_F_ICC_MEM_CFG_MAIN_MEMORY_SIZE_POS))
+
+#define MXC_F_ICC_CTRL_STAT_ENABLE_POS 0
+#define MXC_F_ICC_CTRL_STAT_ENABLE ((uint32_t)(0x00000001UL << MXC_F_ICC_CTRL_STAT_ENABLE_POS))
+#define MXC_F_ICC_CTRL_STAT_READY_POS 16
+#define MXC_F_ICC_CTRL_STAT_READY ((uint32_t)(0x00000001UL << MXC_F_ICC_CTRL_STAT_READY_POS))
+
+#ifdef __cplusplus
+}
+#endif
+
+/**
+* @}
+*/
+
+#endif /* _MXC_ICC_REGS_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/ioman_regs.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,508 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef _MXC_IOMAN_REGS_H_
+#define _MXC_IOMAN_REGS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/**
+ * @file ioman_regs.h
+ * @addtogroup ioman IO MUX Manager
+ * @{
+ */
+
+typedef enum {
+ /** Pin Mapping 'A' */
+ MXC_E_IOMAN_MAPPING_A = 0,
+ /** Pin Mapping 'B' */
+ MXC_E_IOMAN_MAPPING_B,
+ /** Pin Mapping 'C' */
+ MXC_E_IOMAN_MAPPING_C,
+ /** Pin Mapping 'D' */
+ MXC_E_IOMAN_MAPPING_D,
+ /** Pin Mapping 'E' */
+ MXC_E_IOMAN_MAPPING_E,
+ /** Pin Mapping 'F' */
+ MXC_E_IOMAN_MAPPING_F,
+ /** Pin Mapping 'G' */
+ MXC_E_IOMAN_MAPPING_G,
+ /** Pin Mapping 'H' */
+ MXC_E_IOMAN_MAPPING_H,
+} ioman_mapping_t;
+
+/* Offset Register Description
+ ====== ========================================== */
+typedef struct {
+ __IO uint32_t wud_req0; /* 0x0000 Wakeup Detect Mode Request Register 0 */
+ __IO uint32_t wud_req1; /* 0x0004 Wakeup Detect Mode Request Register 1 */
+ __IO uint32_t wud_ack0; /* 0x0008 Wakeup Detect Mode Acknowledge Register 0 */
+ __IO uint32_t wud_ack1; /* 0x000C Wakeup Detect Mode Acknowledge Register 1 */
+ __IO uint32_t ali_req0; /* 0x0010 Analog Input Request Register 0 */
+ __IO uint32_t ali_req1; /* 0x0014 Analog Input Request Register 1 */
+ __IO uint32_t ali_ack0; /* 0x0018 Analog Input Acknowledge Register 0 */
+ __IO uint32_t ali_ack1; /* 0x001C Analog Input Acknowledge Register 1 */
+ __IO uint32_t spi0_req; /* 0x0020 SPI0 I/O Mode Request */
+ __IO uint32_t spi0_ack; /* 0x0024 SPI0 I/O Mode Acknowledge */
+ __IO uint32_t spi1_req; /* 0x0028 SPI1 I/O Mode Request */
+ __IO uint32_t spi1_ack; /* 0x002C SPI1 I/O Mode Acknowledge */
+ __IO uint32_t spi2_req; /* 0x0030 SPI2 I/O Mode Request */
+ __IO uint32_t spi2_ack; /* 0x0034 SPI2 I/O Mode Acknowledge */
+ __IO uint32_t uart0_req; /* 0x0038 UART0 I/O Mode Request */
+ __IO uint32_t uart0_ack; /* 0x003C UART0 I/O Mode Acknowledge */
+ __IO uint32_t uart1_req; /* 0x0040 UART1 I/O Mode Request */
+ __IO uint32_t uart1_ack; /* 0x0044 UART1 I/O Mode Acknowledge */
+ __IO uint32_t i2cm0_req; /* 0x0048 I2C Master 0 I/O Request */
+ __IO uint32_t i2cm0_ack; /* 0x004C I2C Master 0 I/O Acknowledge */
+ __IO uint32_t i2cs0_req; /* 0x0050 I2C Slave 0 I/O Request */
+ __IO uint32_t i2s0_ack; /* 0x0054 I2C Slave 0 I/O Acknowledge */
+ __IO uint32_t lcd_com_req; /* 0x0058 LCD COM Driver I/O Request */
+ __IO uint32_t lcd_com_ack; /* 0x005C LCD COM Driver I/O Acknowledge */
+ __IO uint32_t lcd_seg_req0; /* 0x0060 LCD SEG Driver I/O Request Register 0 */
+ __IO uint32_t lcd_seg_req1; /* 0x0064 LCD SEG Driver I/O Request Register 1 */
+ __IO uint32_t lcd_seg_ack0; /* 0x0068 LCD SEG Driver I/O Acknowledge Register 0 */
+ __IO uint32_t lcd_seg_ack1; /* 0x006C LCD SEG Driver I/O Acknowledge Register 1 */
+ __IO uint32_t crnt_req; /* 0x0070 Current Drive I/O Request Register */
+ __IO uint32_t io_crnt_ack; /* 0x0074 Current Drive I/O Acknowledge Register */
+ __IO uint32_t crnt_mode; /* 0x0078 Current Drive I/O Mode Control */
+ __IO uint32_t ali_connect0; /* 0x007C Analog I/O Connection Control Register 0 */
+ __IO uint32_t ali_connect1; /* 0x0080 Analog I/O Connection Control Register 1 */
+ __IO uint32_t i2cm1_req; /* 0x0084 I2C Master 1 I/O Request */
+ __IO uint32_t i2cm1_ack; /* 0x0088 I2C Master 1 I/O Acknowledge */
+ __IO uint32_t padx_control; /* 0x008C PADX Control */
+} mxc_ioman_regs_t;
+
+
+/*
+ Register offsets for module IOMAN.
+*/
+#define MXC_R_IOMAN_OFFS_WUD_REQ0 ((uint32_t)0x00000000UL)
+#define MXC_R_IOMAN_OFFS_WUD_REQ1 ((uint32_t)0x00000004UL)
+#define MXC_R_IOMAN_OFFS_WUD_ACK0 ((uint32_t)0x00000008UL)
+#define MXC_R_IOMAN_OFFS_WUD_ACK1 ((uint32_t)0x0000000CUL)
+#define MXC_R_IOMAN_OFFS_ALI_REQ0 ((uint32_t)0x00000010UL)
+#define MXC_R_IOMAN_OFFS_ALI_REQ1 ((uint32_t)0x00000014UL)
+#define MXC_R_IOMAN_OFFS_ALI_ACK0 ((uint32_t)0x00000018UL)
+#define MXC_R_IOMAN_OFFS_ALI_ACK1 ((uint32_t)0x0000001CUL)
+#define MXC_R_IOMAN_OFFS_SPI0_REQ ((uint32_t)0x00000020UL)
+#define MXC_R_IOMAN_OFFS_SPI0_ACK ((uint32_t)0x00000024UL)
+#define MXC_R_IOMAN_OFFS_SPI1_REQ ((uint32_t)0x00000028UL)
+#define MXC_R_IOMAN_OFFS_SPI1_ACK ((uint32_t)0x0000002CUL)
+#define MXC_R_IOMAN_OFFS_SPI2_REQ ((uint32_t)0x00000030UL)
+#define MXC_R_IOMAN_OFFS_SPI2_ACK ((uint32_t)0x00000034UL)
+#define MXC_R_IOMAN_OFFS_UART0_REQ ((uint32_t)0x00000038UL)
+#define MXC_R_IOMAN_OFFS_UART0_ACK ((uint32_t)0x0000003CUL)
+#define MXC_R_IOMAN_OFFS_UART1_REQ ((uint32_t)0x00000040UL)
+#define MXC_R_IOMAN_OFFS_UART1_ACK ((uint32_t)0x00000044UL)
+#define MXC_R_IOMAN_OFFS_I2CM0_REQ ((uint32_t)0x00000048UL)
+#define MXC_R_IOMAN_OFFS_I2CM0_ACK ((uint32_t)0x0000004CUL)
+#define MXC_R_IOMAN_OFFS_I2CS0_REQ ((uint32_t)0x00000050UL)
+#define MXC_R_IOMAN_OFFS_I2SC0_ACK ((uint32_t)0x00000054UL)
+#define MXC_R_IOMAN_OFFS_LCD_COM_REQ ((uint32_t)0x00000058UL)
+#define MXC_R_IOMAN_OFFS_LCD_COM_ACK ((uint32_t)0x0000005CUL)
+#define MXC_R_IOMAN_OFFS_LCD_SEG_REQ0 ((uint32_t)0x00000060UL)
+#define MXC_R_IOMAN_OFFS_LCD_SEG_REQ1 ((uint32_t)0x00000064UL)
+#define MXC_R_IOMAN_OFFS_LCD_SEG_ACK0 ((uint32_t)0x00000068UL)
+#define MXC_R_IOMAN_OFFS_LCD_SEG_ACK1 ((uint32_t)0x0000006CUL)
+#define MXC_R_IOMAN_OFFS_IO_CRNT_REQ ((uint32_t)0x00000070UL)
+#define MXC_R_IOMAN_OFFS_IO_CRNT_ACK ((uint32_t)0x00000074UL)
+#define MXC_R_IOMAN_OFFS_IO_CRNT_MODE ((uint32_t)0x00000078UL)
+#define MXC_R_IOMAN_OFFS_ALI_CONNECT0 ((uint32_t)0x0000007CUL)
+#define MXC_R_IOMAN_OFFS_ALI_CONNECT1 ((uint32_t)0x00000080UL)
+#define MXC_R_IOMAN_OFFS_I2CM1_REQ ((uint32_t)0x00000084UL)
+#define MXC_R_IOMAN_OFFS_I2CM1_ACK ((uint32_t)0x00000088UL)
+#define MXC_R_IOMAN_OFFS_PADX_CONTROL ((uint32_t)0x0000008CUL)
+
+
+/*
+ Field positions and masks for module IOMAN.
+*/
+#define MXC_F_IOMAN_WUD_REQ0_PORT0_POS 0
+#define MXC_F_IOMAN_WUD_REQ0_PORT0 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_WUD_REQ0_PORT0_POS))
+#define MXC_F_IOMAN_WUD_REQ0_PORT1_POS 8
+#define MXC_F_IOMAN_WUD_REQ0_PORT1 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_WUD_REQ0_PORT1_POS))
+#define MXC_F_IOMAN_WUD_REQ0_PORT2_POS 16
+#define MXC_F_IOMAN_WUD_REQ0_PORT2 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_WUD_REQ0_PORT2_POS))
+#define MXC_F_IOMAN_WUD_REQ0_PORT3_POS 24
+#define MXC_F_IOMAN_WUD_REQ0_PORT3 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_WUD_REQ0_PORT3_POS))
+
+#define MXC_F_IOMAN_WUD_REQ1_PORT4_POS 0
+#define MXC_F_IOMAN_WUD_REQ1_PORT4 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_WUD_REQ1_PORT4_POS))
+#define MXC_F_IOMAN_WUD_REQ1_PORT5_POS 8
+#define MXC_F_IOMAN_WUD_REQ1_PORT5 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_WUD_REQ1_PORT5_POS))
+#define MXC_F_IOMAN_WUD_REQ1_PORT6_POS 16
+#define MXC_F_IOMAN_WUD_REQ1_PORT6 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_WUD_REQ1_PORT6_POS))
+#define MXC_F_IOMAN_WUD_REQ1_PORT7_POS 24
+#define MXC_F_IOMAN_WUD_REQ1_PORT7 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_WUD_REQ1_PORT7_POS))
+
+#define MXC_F_IOMAN_WUD_ACK0_PORT0_POS 0
+#define MXC_F_IOMAN_WUD_ACK0_PORT0 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_WUD_ACK0_PORT0_POS))
+#define MXC_F_IOMAN_WUD_ACK0_PORT1_POS 8
+#define MXC_F_IOMAN_WUD_ACK0_PORT1 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_WUD_ACK0_PORT1_POS))
+#define MXC_F_IOMAN_WUD_ACK0_PORT2_POS 16
+#define MXC_F_IOMAN_WUD_ACK0_PORT2 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_WUD_ACK0_PORT2_POS))
+#define MXC_F_IOMAN_WUD_ACK0_PORT3_POS 24
+#define MXC_F_IOMAN_WUD_ACK0_PORT3 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_WUD_ACK0_PORT3_POS))
+
+#define MXC_F_IOMAN_WUD_ACK1_PORT4_POS 0
+#define MXC_F_IOMAN_WUD_ACK1_PORT4 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_WUD_ACK1_PORT4_POS))
+#define MXC_F_IOMAN_WUD_ACK1_PORT5_POS 8
+#define MXC_F_IOMAN_WUD_ACK1_PORT5 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_WUD_ACK1_PORT5_POS))
+#define MXC_F_IOMAN_WUD_ACK1_PORT6_POS 16
+#define MXC_F_IOMAN_WUD_ACK1_PORT6 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_WUD_ACK1_PORT6_POS))
+#define MXC_F_IOMAN_WUD_ACK1_PORT7_POS 24
+#define MXC_F_IOMAN_WUD_ACK1_PORT7 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_WUD_ACK1_PORT7_POS))
+
+#define MXC_F_IOMAN_ALI_REQ0_PORT0_POS 0
+#define MXC_F_IOMAN_ALI_REQ0_PORT0 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_ALI_REQ0_PORT0_POS))
+#define MXC_F_IOMAN_ALI_REQ0_PORT1_POS 8
+#define MXC_F_IOMAN_ALI_REQ0_PORT1 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_ALI_REQ0_PORT1_POS))
+#define MXC_F_IOMAN_ALI_REQ0_PORT2_POS 16
+#define MXC_F_IOMAN_ALI_REQ0_PORT2 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_ALI_REQ0_PORT2_POS))
+#define MXC_F_IOMAN_ALI_REQ0_PORT3_POS 24
+#define MXC_F_IOMAN_ALI_REQ0_PORT3 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_ALI_REQ0_PORT3_POS))
+
+#define MXC_F_IOMAN_ALI_REQ1_PORT4_POS 0
+#define MXC_F_IOMAN_ALI_REQ1_PORT4 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_ALI_REQ1_PORT4_POS))
+#define MXC_F_IOMAN_ALI_REQ1_PORT5_POS 8
+#define MXC_F_IOMAN_ALI_REQ1_PORT5 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_ALI_REQ1_PORT5_POS))
+#define MXC_F_IOMAN_ALI_REQ1_PORT6_POS 16
+#define MXC_F_IOMAN_ALI_REQ1_PORT6 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_ALI_REQ1_PORT6_POS))
+#define MXC_F_IOMAN_ALI_REQ1_PORT7_POS 24
+#define MXC_F_IOMAN_ALI_REQ1_PORT7 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_ALI_REQ1_PORT7_POS))
+
+#define MXC_F_IOMAN_ALI_ACK0_PORT0_POS 0
+#define MXC_F_IOMAN_ALI_ACK0_PORT0 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_ALI_ACK0_PORT0_POS))
+#define MXC_F_IOMAN_ALI_ACK0_PORT1_POS 8
+#define MXC_F_IOMAN_ALI_ACK0_PORT1 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_ALI_ACK0_PORT1_POS))
+#define MXC_F_IOMAN_ALI_ACK0_PORT2_POS 16
+#define MXC_F_IOMAN_ALI_ACK0_PORT2 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_ALI_ACK0_PORT2_POS))
+#define MXC_F_IOMAN_ALI_ACK0_PORT3_POS 24
+#define MXC_F_IOMAN_ALI_ACK0_PORT3 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_ALI_ACK0_PORT3_POS))
+
+#define MXC_F_IOMAN_ALI_ACK1_PORT4_POS 0
+#define MXC_F_IOMAN_ALI_ACK1_PORT4 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_ALI_ACK1_PORT4_POS))
+#define MXC_F_IOMAN_ALI_ACK1_PORT5_POS 8
+#define MXC_F_IOMAN_ALI_ACK1_PORT5 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_ALI_ACK1_PORT5_POS))
+#define MXC_F_IOMAN_ALI_ACK1_PORT6_POS 16
+#define MXC_F_IOMAN_ALI_ACK1_PORT6 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_ALI_ACK1_PORT6_POS))
+#define MXC_F_IOMAN_ALI_ACK1_PORT7_POS 24
+#define MXC_F_IOMAN_ALI_ACK1_PORT7 ((uint32_t)(0x000000FFUL << MXC_F_IOMAN_ALI_ACK1_PORT7_POS))
+
+#define MXC_F_IOMAN_SPI_MAPPING_POS 0
+#define MXC_F_IOMAN_SPI_MAPPING ((uint32_t)(0x00000003UL << MXC_F_IOMAN_SPI_MAPPING_POS))
+#define MXC_F_IOMAN_SPI_CORE_IO_POS 4
+#define MXC_F_IOMAN_SPI_CORE_IO ((uint32_t)(0x00000001UL << MXC_F_IOMAN_SPI_CORE_IO_POS))
+#define MXC_F_IOMAN_SPI_SS0_IO_POS 8
+#define MXC_F_IOMAN_SPI_SS0_IO ((uint32_t)(0x00000001UL << MXC_F_IOMAN_SPI_SS0_IO_POS))
+#define MXC_F_IOMAN_SPI_SS1_IO_POS 9
+#define MXC_F_IOMAN_SPI_SS1_IO ((uint32_t)(0x00000001UL << MXC_F_IOMAN_SPI_SS1_IO_POS))
+#define MXC_F_IOMAN_SPI_SS2_IO_POS 10
+#define MXC_F_IOMAN_SPI_SS2_IO ((uint32_t)(0x00000001UL << MXC_F_IOMAN_SPI_SS2_IO_POS))
+#define MXC_F_IOMAN_SPI_SS3_IO_POS 11
+#define MXC_F_IOMAN_SPI_SS3_IO ((uint32_t)(0x00000001UL << MXC_F_IOMAN_SPI_SS3_IO_POS))
+#define MXC_F_IOMAN_SPI_SS4_IO_POS 12
+#define MXC_F_IOMAN_SPI_SS4_IO ((uint32_t)(0x00000001UL << MXC_F_IOMAN_SPI_SS4_IO_POS))
+#define MXC_F_IOMAN_SPI_SR0_IO_POS 16
+#define MXC_F_IOMAN_SPI_SR0_IO ((uint32_t)(0x00000001UL << MXC_F_IOMAN_SPI_SR0_IO_POS))
+#define MXC_F_IOMAN_SPI_SR1_IO_POS 17
+#define MXC_F_IOMAN_SPI_SR1_IO ((uint32_t)(0x00000001UL << MXC_F_IOMAN_SPI_SR1_IO_POS))
+#define MXC_F_IOMAN_SPI_QUAD_IO_POS 20
+#define MXC_F_IOMAN_SPI_QUAD_IO ((uint32_t)(0x00000001UL << MXC_F_IOMAN_SPI_QUAD_IO_POS))
+#define MXC_F_IOMAN_SPI_FAST_MODE_POS 24
+#define MXC_F_IOMAN_SPI_FAST_MODE ((uint32_t)(0x00000001UL << MXC_F_IOMAN_SPI_FAST_MODE_POS))
+
+#define MXC_F_IOMAN_UART_MAPPING_POS 0
+#define MXC_F_IOMAN_UART_MAPPING ((uint32_t)(0x00000003UL << MXC_F_IOMAN_UART_MAPPING_POS))
+#define MXC_F_IOMAN_UART_CORE_IO_POS 4
+#define MXC_F_IOMAN_UART_CORE_IO ((uint32_t)(0x00000001UL << MXC_F_IOMAN_UART_CORE_IO_POS))
+#define MXC_F_IOMAN_UART_CTS_IO_POS 5
+#define MXC_F_IOMAN_UART_CTS_IO ((uint32_t)(0x00000001UL << MXC_F_IOMAN_UART_CTS_IO_POS))
+#define MXC_F_IOMAN_UART_RTS_IO_POS 6
+#define MXC_F_IOMAN_UART_RTS_IO ((uint32_t)(0x00000001UL << MXC_F_IOMAN_UART_RTS_IO_POS))
+
+#define MXC_F_IOMAN_I2CM_MAPPING_POS 0
+#define MXC_F_IOMAN_I2CM_MAPPING ((uint32_t)(0x00000003UL << MXC_F_IOMAN_I2CM_MAPPING_POS))
+#define MXC_F_IOMAN_I2CM_CORE_IO_POS 4
+#define MXC_F_IOMAN_I2CM_CORE_IO ((uint32_t)(0x00000001UL << MXC_F_IOMAN_I2CM_CORE_IO_POS))
+
+#define MXC_F_IOMAN_I2CS_MAPPING_POS 0
+#define MXC_F_IOMAN_I2CS_MAPPING ((uint32_t)(0x00000003UL << MXC_F_IOMAN_I2CS_MAPPING_POS))
+#define MXC_F_IOMAN_I2CS_CORE_IO_POS 4
+#define MXC_F_IOMAN_I2CS_CORE_IO ((uint32_t)(0x00000001UL << MXC_F_IOMAN_I2CS_CORE_IO_POS))
+
+#define MXC_F_IOMAN_LCD_COM_REQ_COM_IO_POS 0
+#define MXC_F_IOMAN_LCD_COM_REQ_COM_IO ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_COM_REQ_COM_IO_POS))
+
+#define MXC_F_IOMAN_LCD_COM_ACK_COM_IO_POS 0
+#define MXC_F_IOMAN_LCD_COM_ACK_COM_IO ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_COM_ACK_COM_IO_POS))
+
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_24_POS 0
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_24 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_24_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_25_POS 1
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_25 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_25_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_26_POS 2
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_26 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_26_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_27_POS 3
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_27 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_27_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_28_POS 4
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_28 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_28_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_29_POS 5
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_29 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_29_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_30_POS 6
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_30 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_30_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_31_POS 7
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_31 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_31_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_32_POS 8
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_32 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_32_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_33_POS 9
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_33 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_33_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_34_POS 10
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_34 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_34_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_35_POS 11
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_35 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_35_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_36_POS 12
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_36 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_36_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_37_POS 13
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_37 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_37_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_38_POS 14
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_38 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_38_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_39_POS 15
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_39 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_39_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_40_POS 16
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_40 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_40_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_41_POS 17
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_41 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_41_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_42_POS 18
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_42 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_42_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_43_POS 19
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_43 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_43_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_44_POS 20
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_44 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_44_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_45_POS 21
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_45 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_45_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_46_POS 22
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_46 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_46_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_47_POS 23
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_47 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_47_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_48_POS 24
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_48 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_48_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_49_POS 25
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_49 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_49_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_50_POS 26
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_50 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_50_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_51_POS 27
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_51 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_51_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_52_POS 28
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_52 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_52_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_53_POS 29
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_53 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_53_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_54_POS 30
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_54 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_54_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_55_POS 31
+#define MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_55 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ0_IO_REQ_55_POS))
+
+#define MXC_F_IOMAN_LCD_SEG_REQ1_IO_REQ_56_POS 0
+#define MXC_F_IOMAN_LCD_SEG_REQ1_IO_REQ_56 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ1_IO_REQ_56_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ1_IO_REQ_57_POS 1
+#define MXC_F_IOMAN_LCD_SEG_REQ1_IO_REQ_57 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ1_IO_REQ_57_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ1_IO_REQ_58_POS 2
+#define MXC_F_IOMAN_LCD_SEG_REQ1_IO_REQ_58 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ1_IO_REQ_58_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ1_IO_REQ_59_POS 3
+#define MXC_F_IOMAN_LCD_SEG_REQ1_IO_REQ_59 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ1_IO_REQ_59_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ1_IO_REQ_60_POS 4
+#define MXC_F_IOMAN_LCD_SEG_REQ1_IO_REQ_60 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ1_IO_REQ_60_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ1_IO_REQ_61_POS 5
+#define MXC_F_IOMAN_LCD_SEG_REQ1_IO_REQ_61 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ1_IO_REQ_61_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ1_IO_REQ_62_POS 6
+#define MXC_F_IOMAN_LCD_SEG_REQ1_IO_REQ_62 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ1_IO_REQ_62_POS))
+#define MXC_F_IOMAN_LCD_SEG_REQ1_IO_REQ_63_POS 7
+#define MXC_F_IOMAN_LCD_SEG_REQ1_IO_REQ_63 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_REQ1_IO_REQ_63_POS))
+
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_24_POS 0
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_24 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_24_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_25_POS 1
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_25 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_25_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_26_POS 2
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_26 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_26_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_27_POS 3
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_27 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_27_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_28_POS 4
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_28 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_28_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_29_POS 5
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_29 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_29_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_30_POS 6
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_30 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_30_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_31_POS 7
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_31 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_31_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_32_POS 8
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_32 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_32_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_33_POS 9
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_33 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_33_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_34_POS 10
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_34 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_34_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_35_POS 11
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_35 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_35_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_36_POS 12
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_36 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_36_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_37_POS 13
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_37 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_37_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_38_POS 14
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_38 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_38_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_39_POS 15
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_39 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_39_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_40_POS 16
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_40 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_40_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_41_POS 17
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_41 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_41_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_42_POS 18
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_42 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_42_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_43_POS 19
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_43 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_43_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_44_POS 20
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_44 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_44_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_45_POS 21
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_45 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_45_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_46_POS 22
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_46 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_46_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_47_POS 23
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_47 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_47_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_48_POS 24
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_48 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_48_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_49_POS 25
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_49 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_49_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_50_POS 26
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_50 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_50_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_51_POS 27
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_51 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_51_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_52_POS 28
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_52 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_52_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_53_POS 29
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_53 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_53_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_54_POS 30
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_54 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_54_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_55_POS 31
+#define MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_55 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK0_IO_ACK_55_POS))
+
+#define MXC_F_IOMAN_LCD_SEG_ACK1_IO_ACK_56_POS 0
+#define MXC_F_IOMAN_LCD_SEG_ACK1_IO_ACK_56 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK1_IO_ACK_56_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK1_IO_ACK_57_POS 1
+#define MXC_F_IOMAN_LCD_SEG_ACK1_IO_ACK_57 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK1_IO_ACK_57_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK1_IO_ACK_58_POS 2
+#define MXC_F_IOMAN_LCD_SEG_ACK1_IO_ACK_58 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK1_IO_ACK_58_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK1_IO_ACK_59_POS 3
+#define MXC_F_IOMAN_LCD_SEG_ACK1_IO_ACK_59 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK1_IO_ACK_59_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK1_IO_ACK_60_POS 4
+#define MXC_F_IOMAN_LCD_SEG_ACK1_IO_ACK_60 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK1_IO_ACK_60_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK1_IO_ACK_61_POS 5
+#define MXC_F_IOMAN_LCD_SEG_ACK1_IO_ACK_61 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK1_IO_ACK_61_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK1_IO_ACK_62_POS 6
+#define MXC_F_IOMAN_LCD_SEG_ACK1_IO_ACK_62 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK1_IO_ACK_62_POS))
+#define MXC_F_IOMAN_LCD_SEG_ACK1_IO_ACK_63_POS 7
+#define MXC_F_IOMAN_LCD_SEG_ACK1_IO_ACK_63 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_LCD_SEG_ACK1_IO_ACK_63_POS))
+
+#define MXC_F_IOMAN_CRNT_REQ_IO_REQ_CRNT0_POS 0
+#define MXC_F_IOMAN_CRNT_REQ_IO_REQ_CRNT0 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_CRNT_REQ_IO_REQ_CRNT0_POS))
+#define MXC_F_IOMAN_CRNT_REQ_IO_REQ_CRNT1_POS 1
+#define MXC_F_IOMAN_CRNT_REQ_IO_REQ_CRNT1 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_CRNT_REQ_IO_REQ_CRNT1_POS))
+#define MXC_F_IOMAN_CRNT_REQ_IO_REQ_CRNT2_POS 2
+#define MXC_F_IOMAN_CRNT_REQ_IO_REQ_CRNT2 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_CRNT_REQ_IO_REQ_CRNT2_POS))
+#define MXC_F_IOMAN_CRNT_REQ_IO_REQ_CRNT3_POS 3
+#define MXC_F_IOMAN_CRNT_REQ_IO_REQ_CRNT3 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_CRNT_REQ_IO_REQ_CRNT3_POS))
+#define MXC_F_IOMAN_CRNT_REQ_IO_REQ_CRNT4_POS 4
+#define MXC_F_IOMAN_CRNT_REQ_IO_REQ_CRNT4 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_CRNT_REQ_IO_REQ_CRNT4_POS))
+#define MXC_F_IOMAN_CRNT_REQ_IO_REQ_CRNT5_POS 5
+#define MXC_F_IOMAN_CRNT_REQ_IO_REQ_CRNT5 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_CRNT_REQ_IO_REQ_CRNT5_POS))
+#define MXC_F_IOMAN_CRNT_REQ_IO_REQ_CRNT6_POS 6
+#define MXC_F_IOMAN_CRNT_REQ_IO_REQ_CRNT6 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_CRNT_REQ_IO_REQ_CRNT6_POS))
+#define MXC_F_IOMAN_CRNT_REQ_IO_REQ_CRNT7_POS 7
+#define MXC_F_IOMAN_CRNT_REQ_IO_REQ_CRNT7 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_CRNT_REQ_IO_REQ_CRNT7_POS))
+
+#define MXC_F_IOMAN_CRNT_ACK_IO_ACK_CRNT0_POS 0
+#define MXC_F_IOMAN_CRNT_ACK_IO_ACK_CRNT0 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_CRNT_ACK_IO_ACK_CRNT0_POS))
+#define MXC_F_IOMAN_CRNT_ACK_IO_ACK_CRNT1_POS 1
+#define MXC_F_IOMAN_CRNT_ACK_IO_ACK_CRNT1 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_CRNT_ACK_IO_ACK_CRNT1_POS))
+#define MXC_F_IOMAN_CRNT_ACK_IO_ACK_CRNT2_POS 2
+#define MXC_F_IOMAN_CRNT_ACK_IO_ACK_CRNT2 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_CRNT_ACK_IO_ACK_CRNT2_POS))
+#define MXC_F_IOMAN_CRNT_ACK_IO_ACK_CRNT3_POS 3
+#define MXC_F_IOMAN_CRNT_ACK_IO_ACK_CRNT3 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_CRNT_ACK_IO_ACK_CRNT3_POS))
+#define MXC_F_IOMAN_CRNT_ACK_IO_ACK_CRNT4_POS 4
+#define MXC_F_IOMAN_CRNT_ACK_IO_ACK_CRNT4 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_CRNT_ACK_IO_ACK_CRNT4_POS))
+#define MXC_F_IOMAN_CRNT_ACK_IO_ACK_CRNT5_POS 5
+#define MXC_F_IOMAN_CRNT_ACK_IO_ACK_CRNT5 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_CRNT_ACK_IO_ACK_CRNT5_POS))
+#define MXC_F_IOMAN_CRNT_ACK_IO_ACK_CRNT6_POS 6
+#define MXC_F_IOMAN_CRNT_ACK_IO_ACK_CRNT6 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_CRNT_ACK_IO_ACK_CRNT6_POS))
+#define MXC_F_IOMAN_CRNT_ACK_IO_ACK_CRNT7_POS 7
+#define MXC_F_IOMAN_CRNT_ACK_IO_ACK_CRNT7 ((uint32_t)(0x00000001UL << MXC_F_IOMAN_CRNT_ACK_IO_ACK_CRNT7_POS))
+
+#define MXC_F_IOMAN_CRNT_MODE_IO_CRNT0_POS 0
+#define MXC_F_IOMAN_CRNT_MODE_IO_CRNT0 ((uint32_t)(0x0000000FUL << MXC_F_IOMAN_CRNT_MODE_IO_CRNT0_POS))
+#define MXC_F_IOMAN_CRNT_MODE_IO_CRNT1_POS 4
+#define MXC_F_IOMAN_CRNT_MODE_IO_CRNT1 ((uint32_t)(0x0000000FUL << MXC_F_IOMAN_CRNT_MODE_IO_CRNT1_POS))
+#define MXC_F_IOMAN_CRNT_MODE_IO_CRNT2_POS 8
+#define MXC_F_IOMAN_CRNT_MODE_IO_CRNT2 ((uint32_t)(0x0000000FUL << MXC_F_IOMAN_CRNT_MODE_IO_CRNT2_POS))
+#define MXC_F_IOMAN_CRNT_MODE_IO_CRNT3_POS 12
+#define MXC_F_IOMAN_CRNT_MODE_IO_CRNT3 ((uint32_t)(0x0000000FUL << MXC_F_IOMAN_CRNT_MODE_IO_CRNT3_POS))
+#define MXC_F_IOMAN_CRNT_MODE_IO_CRNT4_POS 16
+#define MXC_F_IOMAN_CRNT_MODE_IO_CRNT4 ((uint32_t)(0x0000000FUL << MXC_F_IOMAN_CRNT_MODE_IO_CRNT4_POS))
+#define MXC_F_IOMAN_CRNT_MODE_IO_CRNT5_POS 20
+#define MXC_F_IOMAN_CRNT_MODE_IO_CRNT5 ((uint32_t)(0x0000000FUL << MXC_F_IOMAN_CRNT_MODE_IO_CRNT5_POS))
+#define MXC_F_IOMAN_CRNT_MODE_IO_CRNT6_POS 24
+#define MXC_F_IOMAN_CRNT_MODE_IO_CRNT6 ((uint32_t)(0x0000000FUL << MXC_F_IOMAN_CRNT_MODE_IO_CRNT6_POS))
+#define MXC_F_IOMAN_CRNT_MODE_IO_CRNT7_POS 28
+#define MXC_F_IOMAN_CRNT_MODE_IO_CRNT7 ((uint32_t)(0x0000000FUL << MXC_F_IOMAN_CRNT_MODE_IO_CRNT7_POS))
+
+#define MXC_F_IOMAN_PADX_CONTROL_PADX_POWER_CONTROL_POS 0
+#define MXC_F_IOMAN_PADX_CONTROL_PADX_POWER_CONTROL ((uint32_t)(0x00000001UL << MXC_F_IOMAN_PADX_CONTROL_PADX_POWER_CONTROL_POS))
+#define MXC_F_IOMAN_PADX_CONTROL_PADX_GPIO0_OUT_MODE_POS 4
+#define MXC_F_IOMAN_PADX_CONTROL_PADX_GPIO0_OUT_MODE ((uint32_t)(0x00000003UL << MXC_F_IOMAN_PADX_CONTROL_PADX_GPIO0_OUT_MODE_POS))
+#define MXC_F_IOMAN_PADX_CONTROL_PADX_GPIO0_INPUT_STATE_POS 6
+#define MXC_F_IOMAN_PADX_CONTROL_PADX_GPIO0_INPUT_STATE ((uint32_t)(0x00000001UL << MXC_F_IOMAN_PADX_CONTROL_PADX_GPIO0_INPUT_STATE_POS))
+#define MXC_F_IOMAN_PADX_CONTROL_PADX_GPIO1_OUT_MODE_POS 8
+#define MXC_F_IOMAN_PADX_CONTROL_PADX_GPIO1_OUT_MODE ((uint32_t)(0x00000003UL << MXC_F_IOMAN_PADX_CONTROL_PADX_GPIO1_OUT_MODE_POS))
+#define MXC_F_IOMAN_PADX_CONTROL_PADX_GPIO1_INPUT_STATE_POS 10
+#define MXC_F_IOMAN_PADX_CONTROL_PADX_GPIO1_INPUT_STATE ((uint32_t)(0x00000001UL << MXC_F_IOMAN_PADX_CONTROL_PADX_GPIO1_INPUT_STATE_POS))
+
+#ifdef __cplusplus
+}
+#endif
+
+/**
+* @}
+*/
+
+#endif /* _MXC_IOMAN_REGS_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/lcd_regs.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,70 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef _MXC_LCD_REGS_H
+#define _MXC_LCD_REGS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/**
+ * @file lcd_regs.h
+ * @addtogroup lcd LCD
+ * @{
+ */
+
+#define MXC_LCD_ADDRESS_SEGS 21
+
+/* Offset Register Description
+ ====== ======================================================= */
+typedef struct {
+ __IO uint32_t lcfg; /* 0x0000 */
+ __IO uint32_t lcra; /* 0x0004 */
+ __IO uint32_t lpcf; /* 0x0008 LCD Port Configuration Register */
+ __IO uint32_t lcaddr; /* 0x000C */
+ __IO uint32_t lcdata; /* 0x0010 LCD Memory Data Read / Write */
+ __IO uint32_t lpwrctrl; /* 0x0014 LCD Power Control */
+} mxc_lcd_regs_t;
+
+#ifdef __cplusplus
+}
+#endif
+
+/**
+ * @}
+ */
+
+#endif /* _MXC_LCD_REGS_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/maa_regs.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,124 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef _MXC_MAA_REGS_H_
+#define _MXC_MAA_REGS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/**
+ * @file maa_regs.h
+ * @addtogroup maa MAA
+ * @{
+ */
+
+/* Offset Register Description
+ ====== ========================================================== */
+typedef struct {
+ __IO uint32_t ctrl; /* 0x0000 MAA Control, Configuration and Status */
+ __IO uint32_t maws; /* 0x0004 MAA Word (Operand) Size, Big/Little Endian Mode Select */
+} mxc_maa_regs_t;
+
+/* Offset Register Description
+ ====== ========================================================== */
+typedef struct {
+ __IO uint32_t seg0[16]; /* 0x0000 [64 bytes] MAA Memory Segment 0 */
+ __IO uint32_t seg1[16]; /* 0x0040 [64 bytes] MAA Memory Segment 1 */
+ __IO uint32_t seg2[16]; /* 0x0080 [64 bytes] MAA Memory Segment 2 */
+ __IO uint32_t seg3[16]; /* 0x00C0 [64 bytes] MAA Memory Segment 3 */
+ __IO uint32_t seg4[16]; /* 0x0100 [64 bytes] MAA Memory Segment 4 */
+ __IO uint32_t seg5[16]; /* 0x0140 [64 bytes] MAA Memory Segment 5 */
+} mxc_maa_mem_regs_t;
+
+/*
+ Register offsets for module MAA.
+*/
+#define MXC_R_MAA_OFFS_CTRL ((uint32_t)0x00000000UL)
+#define MXC_R_MAA_OFFS_MAWS ((uint32_t)0x00000004UL)
+#define MXC_R_MAA_MEM_OFFS_SEG0 ((uint32_t)0x00000000UL)
+#define MXC_R_MAA_MEM_OFFS_SEG1 ((uint32_t)0x00000040UL)
+#define MXC_R_MAA_MEM_OFFS_SEG2 ((uint32_t)0x00000080UL)
+#define MXC_R_MAA_MEM_OFFS_SEG3 ((uint32_t)0x000000C0UL)
+#define MXC_R_MAA_MEM_OFFS_SEG4 ((uint32_t)0x00000100UL)
+#define MXC_R_MAA_MEM_OFFS_SEG5 ((uint32_t)0x00000140UL)
+
+/*
+ Field positions and masks for module MAA.
+*/
+#define MXC_F_MAA_CTRL_START_POS 0
+#define MXC_F_MAA_CTRL_START ((uint32_t)(0x00000001UL << MXC_F_MAA_CTRL_START_POS))
+#define MXC_F_MAA_CTRL_OPSEL_POS 1
+#define MXC_F_MAA_CTRL_OPSEL ((uint32_t)(0x00000007UL << MXC_F_MAA_CTRL_OPSEL_POS))
+#define MXC_F_MAA_CTRL_OCALC_POS 4
+#define MXC_F_MAA_CTRL_OCALC ((uint32_t)(0x00000001UL << MXC_F_MAA_CTRL_OCALC_POS))
+#define MXC_F_MAA_CTRL_INTEN_POS 5
+#define MXC_F_MAA_CTRL_INTEN ((uint32_t)(0x00000001UL << MXC_F_MAA_CTRL_INTEN_POS))
+#define MXC_F_MAA_CTRL_IF_DONE_POS 6
+#define MXC_F_MAA_CTRL_IF_DONE ((uint32_t)(0x00000001UL << MXC_F_MAA_CTRL_IF_DONE_POS))
+#define MXC_F_MAA_CTRL_IF_ERROR_POS 7
+#define MXC_F_MAA_CTRL_IF_ERROR ((uint32_t)(0x00000001UL << MXC_F_MAA_CTRL_IF_ERROR_POS))
+#define MXC_F_MAA_CTRL_OFS_A_POS 8
+#define MXC_F_MAA_CTRL_OFS_A ((uint32_t)(0x00000003UL << MXC_F_MAA_CTRL_OFS_A_POS))
+#define MXC_F_MAA_CTRL_OFS_B_POS 10
+#define MXC_F_MAA_CTRL_OFS_B ((uint32_t)(0x00000003UL << MXC_F_MAA_CTRL_OFS_B_POS))
+#define MXC_F_MAA_CTRL_OFS_EXP_POS 12
+#define MXC_F_MAA_CTRL_OFS_EXP ((uint32_t)(0x00000003UL << MXC_F_MAA_CTRL_OFS_EXP_POS))
+#define MXC_F_MAA_CTRL_OFS_MOD_POS 14
+#define MXC_F_MAA_CTRL_OFS_MOD ((uint32_t)(0x00000003UL << MXC_F_MAA_CTRL_OFS_MOD_POS))
+#define MXC_F_MAA_CTRL_SEG_A_POS 16
+#define MXC_F_MAA_CTRL_SEG_A ((uint32_t)(0x0000000FUL << MXC_F_MAA_CTRL_SEG_A_POS))
+#define MXC_F_MAA_CTRL_SEG_B_POS 20
+#define MXC_F_MAA_CTRL_SEG_B ((uint32_t)(0x0000000FUL << MXC_F_MAA_CTRL_SEG_B_POS))
+#define MXC_F_MAA_CTRL_SEG_RES_POS 24
+#define MXC_F_MAA_CTRL_SEG_RES ((uint32_t)(0x0000000FUL << MXC_F_MAA_CTRL_SEG_RES_POS))
+#define MXC_F_MAA_CTRL_SEG_TMP_POS 28
+#define MXC_F_MAA_CTRL_SEG_TMP ((uint32_t)(0x0000000FUL << MXC_F_MAA_CTRL_SEG_TMP_POS))
+
+#define MXC_F_MAA_MAWS_MODLEN_POS 0
+#define MXC_F_MAA_MAWS_MODLEN ((uint32_t)(0x000003FFUL << MXC_F_MAA_MAWS_MODLEN_POS))
+#define MXC_F_MAA_MAWS_BYTESWAP_POS 16
+#define MXC_F_MAA_MAWS_BYTESWAP ((uint32_t)(0x00000001UL << MXC_F_MAA_MAWS_BYTESWAP_POS))
+
+#ifdef __cplusplus
+}
+#endif
+
+/**
+* @}
+*/
+
+#endif /* _MXC_MAA_REGS_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/max32600.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,666 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef _MAX32600_H_
+#define _MAX32600_H_
+
+#include <stdint.h>
+
+typedef enum IRQn_Type {
+ NonMaskableInt_IRQn = -14,
+ HardFault_IRQn = -13,
+ MemoryManagement_IRQn = -12,
+ BusFault_IRQn = -11,
+ UsageFault_IRQn = -10,
+ SVCall_IRQn = -5,
+ DebugMonitor_IRQn = -4,
+ PendSV_IRQn = -2,
+ SysTick_IRQn = -1,
+
+ /* Externals interrupts */
+ UART0_IRQn = 0, /* 16:01 UART0 */
+ UART1_IRQn, /* 17: 2 UART1 */
+ I2CM0_IRQn, /* 18: 3 I2C Master 0 */
+ I2CS_IRQn, /* 19: 4 I2C Slave */
+ USB_IRQn, /* 20: 5 USB */
+ PMU_IRQn, /* 21: 6 DMA */
+ AFE_IRQn, /* 22: 7 AFE */
+ MAA_IRQn, /* 23: 8 MAA */
+ AES_IRQn, /* 24: 9 AES */
+ SPI0_IRQn, /* 25:10 SPI0 */
+ SPI1_IRQn, /* 26:11 SPI1 */
+ SPI2_IRQn, /* 27:12 SPI2 */
+ TMR0_IRQn, /* 28:13 Timer32-0 */
+ TMR1_IRQn, /* 29:14 Timer32-1 */
+ TMR2_IRQn, /* 30:15 Timer32-1 */
+ TMR3_IRQn, /* 31:16 Timer32-2 */
+ RSVD0_IRQn, /* 32:17 RSVD */
+ RSVD1_IRQn, /* 33:18 RSVD */
+ DAC0_IRQn, /* 34:19 DAC0 (12-bit DAC) */
+ DAC1_IRQn, /* 35:20 DAC1 (12-bit DAC) */
+ DAC2_IRQn, /* 36:21 DAC2 (8-bit DAC) */
+ DAC3_IRQn, /* 37:22 DAC3 (8-bit DAC) */
+ ADC_IRQn, /* 38:23 ADC */
+ FLC_IRQn, /* 39:24 Flash Controller */
+ PWRMAN_IRQn, /* 40:25 PWRMAN */
+ CLKMAN_IRQn, /* 41:26 CLKMAN */
+ RTC0_IRQn, /* 42:27 RTC INT0 */
+ RTC1_IRQn, /* 43:28 RTC INT1 */
+ RTC2_IRQn, /* 44:29 RTC INT2 */
+ RTC3_IRQn, /* 45:30 RTC INT3 */
+ WDT0_IRQn, /* 46:31 WATCHDOG0 */
+ WDT0_P_IRQn, /* 47:32 WATCHDOG0 PRE-WINDOW */
+ WDT1_IRQn, /* 48:33 WATCHDOG1 */
+ WDT1_P_IRQn, /* 49:34 WATCHDOG1 PRE-WINDOW */
+ GPIO_P0_IRQn, /* 50:35 GPIO Port 0 */
+ GPIO_P1_IRQn, /* 51:36 GPIO Port 1 */
+ GPIO_P2_IRQn, /* 52:37 GPIO Port 2 */
+ GPIO_P3_IRQn, /* 53:38 GPIO Port 3 */
+ GPIO_P4_IRQn, /* 54:39 GPIO Port 4 */
+ GPIO_P5_IRQn, /* 55:40 GPIO Port 5 */
+ GPIO_P6_IRQn, /* 56:41 GPIO Port 6 */
+ GPIO_P7_IRQn, /* 57:42 GPIO Port 7 */
+ TMR16_0_IRQn, /* 58:43 Timer16-s0 */
+ TMR16_1_IRQn, /* 59:44 Timer16-s1 */
+ TMR16_2_IRQn, /* 60:45 Timer16-s2 */
+ TMR16_3_IRQn, /* 61:46 Timer16-s3 */
+ I2CM1_IRQn, /* 62:47 I2C Master 1 */
+ MXC_IRQ_EXT_COUNT,
+} IRQn_Type;
+
+#define MXC_IRQ_COUNT (MXC_IRQ_EXT_COUNT + 16)
+
+/* ================================================================================ */
+/* ================ Processor and Core Peripheral Section ================ */
+/* ================================================================================ */
+
+#define __NVIC_PRIO_BITS 3 /*!< Number of Bits used for Priority Levels */
+
+#include <core_cm3.h> /* Processor and core peripherals */
+#include "system_max32600.h" /* System Header */
+
+/* ================================================================================ */
+/* ================== Device Specific Memory Section ================== */
+/* ================================================================================ */
+
+#define MXC_FLASH_MEM_BASE 0x00000000UL
+#define MXC_FLASH_PAGE_SIZE 0x1000 // 256 x 128b = 4KB
+#define MXC_FLASH_MEM_SIZE 0x00040000UL
+#define MXC_SYS_MEM_BASE 0x20000000UL
+
+/* ================================================================================ */
+/* ================ Device Specific Peripheral Section ================ */
+/* ================================================================================ */
+
+/*******************************************************************************/
+/* General Purpose I/O Ports (GPIO) */
+
+#define MXC_BASE_GPIO ((uint32_t)0x40000000UL)
+#define MXC_GPIO ((mxc_gpio_regs_t *)MXC_BASE_GPIO)
+#define MXC_BASE_GPIO_BITBAND ((uint32_t)0x42000000UL)
+
+#define MXC_GPIO_GET_IRQ(i) (((unsigned int)i) + GPIO_P0_IRQn)
+
+
+/*******************************************************************************/
+/* Pulse Train Generation */
+
+#define MXC_CFG_PT_INSTANCES (13)
+
+#define MXC_BASE_PTG ((uint32_t)0x40001000UL)
+#define MXC_PTG ((mxc_ptg_regs_t *)MXC_BASE_PTG)
+#define MXC_BASE_PT ((uint32_t)0x40001008UL)
+#define MXC_PT ((mxc_pt_regs_t *)MXC_BASE_PT)
+#define MXC_BASE_PT0 ((uint32_t)0x40001008UL)
+#define MXC_PT0 ((mxc_pt_regs_t *)MXC_BASE_PT0)
+#define MXC_BASE_PT1 ((uint32_t)0x40001010UL)
+#define MXC_PT1 ((mxc_pt_regs_t *)MXC_BASE_PT1)
+#define MXC_BASE_PT2 ((uint32_t)0x40001018UL)
+#define MXC_PT2 ((mxc_pt_regs_t *)MXC_BASE_PT2)
+#define MXC_BASE_PT3 ((uint32_t)0x40001020UL)
+#define MXC_PT3 ((mxc_pt_regs_t *)MXC_BASE_PT3)
+#define MXC_BASE_PT4 ((uint32_t)0x40001028UL)
+#define MXC_PT4 ((mxc_pt_regs_t *)MXC_BASE_PT4)
+#define MXC_BASE_PT5 ((uint32_t)0x40001030UL)
+#define MXC_PT5 ((mxc_pt_regs_t *)MXC_BASE_PT5)
+#define MXC_BASE_PT6 ((uint32_t)0x40001038UL)
+#define MXC_PT6 ((mxc_pt_regs_t *)MXC_BASE_PT6)
+#define MXC_BASE_PT7 ((uint32_t)0x40001040UL)
+#define MXC_PT7 ((mxc_pt_regs_t *)MXC_BASE_PT7)
+#define MXC_BASE_PT8 ((uint32_t)0x40001048UL)
+#define MXC_PT8 ((mxc_pt_regs_t *)MXC_BASE_PT8)
+#define MXC_BASE_PT9 ((uint32_t)0x40001050UL)
+#define MXC_PT9 ((mxc_pt_regs_t *)MXC_BASE_PT9)
+#define MXC_BASE_PT10 ((uint32_t)0x40001058UL)
+#define MXC_PT10 ((mxc_pt_regs_t *)MXC_BASE_PT10)
+#define MXC_BASE_PT11 ((uint32_t)0x40001060UL)
+#define MXC_PT11 ((mxc_pt_regs_t *)MXC_BASE_PT11)
+
+/* PT12, PT13, PT14 are not used */
+
+/*******************************************************************************/
+/* CRC-16/CRC-32 Engine */
+
+#define MXC_BASE_CRC ((uint32_t)0x40010000UL)
+#define MXC_CRC_REGS ((mxc_crc_regs_t *)MXC_BASE_CRC)
+
+#define MXC_BASE_CRC_DATA ((uint32_t)0x4010B000UL)
+#define MXC_CRC_DATA ((mxc_crc_data_regs_t *)MXC_BASE_CRC_DATA)
+
+/*******************************************************************************/
+/* Trust Protection Unit (TPU) */
+
+#define MXC_BASE_TPU ((uint32_t)0x40011000UL)
+#define MXC_TPU ((mxc_tpu_regs_t *)MXC_BASE_TPU)
+
+#define MXC_BASE_TPU_TSR ((uint32_t)0x40011C00UL)
+#define MXC_TPU_TSR ((mxc_tpu_tsr_regs_t *)MXC_BASE_TPU_TSR)
+
+/*******************************************************************************/
+/* AES Cryptographic Engine */
+
+#define MXC_BASE_AES ((uint32_t)0x40011400UL)
+#define MXC_AES ((mxc_aes_regs_t *)MXC_BASE_AES)
+
+#define MXC_BASE_AES_MEM ((uint32_t)0x4010A000UL)
+#define MXC_AES_MEM ((mxc_aes_mem_regs_t *)MXC_BASE_AES_MEM)
+
+
+/*******************************************************************************/
+/* MAA Cryptographic Engine */
+
+#define MXC_BASE_MAA ((uint32_t)0x40011800UL)
+#define MXC_MAA ((mxc_maa_regs_t *)MXC_BASE_MAA)
+
+#define MXC_BASE_MAA_MEM ((uint32_t)0x4010A800UL)
+#define MXC_MAA_MEM ((mxc_maa_mem_regs_t *)MXC_BASE_MAA_MEM)
+
+/*******************************************************************************/
+/* 32-Bit PWM Timer/Counter */
+
+#define MXC_CFG_TMR_INSTANCES (4)
+
+#define MXC_BASE_TMR0 ((uint32_t)0x40012000UL)
+#define MXC_BASE_TMR0_BITBAND ((uint32_t)0x42240000UL)
+#define MXC_TMR0 ((mxc_tmr_regs_t *) MXC_BASE_TMR0)
+
+#define MXC_BASE_TMR1 ((uint32_t)0x40013000UL)
+#define MXC_BASE_TMR1_BITBAND ((uint32_t)0x42260000UL)
+#define MXC_TMR1 ((mxc_tmr_regs_t *) MXC_BASE_TMR1)
+
+#define MXC_BASE_TMR2 ((uint32_t)0x40014000UL)
+#define MXC_BASE_TMR2_BITBAND ((uint32_t)0x42280000UL)
+#define MXC_TMR2 ((mxc_tmr_regs_t *) MXC_BASE_TMR2)
+
+#define MXC_BASE_TMR3 ((uint32_t)0x40015000UL)
+#define MXC_BASE_TMR3_BITBAND ((uint32_t)0x422A0000UL)
+#define MXC_TMR3 ((mxc_tmr_regs_t *) MXC_BASE_TMR3)
+
+
+#define MXC_TMR_GET_IRQ_32(i) ((i) == 0 ? TMR0_IRQn : \
+ (i) == 1 ? TMR1_IRQn : \
+ (i) == 2 ? TMR2_IRQn : \
+ (i) == 3 ? TMR3_IRQn : 0)
+
+#define MXC_TMR_GET_IRQ_16(i) ((i) == 0 ? TMR0_IRQn : \
+ (i) == 1 ? TMR1_IRQn : \
+ (i) == 2 ? TMR2_IRQn : \
+ (i) == 3 ? TMR3_IRQn : \
+ (i) == 4 ? TMR16_0_IRQn : \
+ (i) == 5 ? TMR16_1_IRQn : \
+ (i) == 6 ? TMR16_2_IRQn : \
+ (i) == 7 ? TMR16_3_IRQn : 0)
+
+#define MXC_TMR_GET_BASE(i) ((i) == 0 ? MXC_BASE_TMR0 : \
+ (i) == 1 ? MXC_BASE_TMR1 : \
+ (i) == 2 ? MXC_BASE_TMR2 : \
+ (i) == 3 ? MXC_BASE_TMR3 : 0)
+
+#define MXC_TMR_GET_TMR(i) ((i) == 0 ? MXC_TMR0 : \
+ (i) == 1 ? MXC_TMR1 : \
+ (i) == 2 ? MXC_TMR2 : \
+ (i) == 3 ? MXC_TMR3 : 0)
+/*******************************************************************************/
+/* Watchdog Timer */
+
+#define MXC_CFG_WDT_INSTANCES (2)
+
+#define MXC_BASE_WDT0 ((uint32_t)0x40021000UL)
+#define MXC_BASE_WDT0_BITBAND ((uint32_t)0x42420000UL)
+#define MXC_WDT0 ((mxc_wdt_regs_t *)MXC_BASE_WDT0)
+
+#define MXC_BASE_WDT1 ((uint32_t)0x40022000UL)
+#define MXC_BASE_WDT1_BITBAND ((uint32_t)0x42440000UL)
+#define MXC_WDT1 ((mxc_wdt_regs_t *)MXC_BASE_WDT1)
+
+#define MXC_WDT_GET_IRQ(i) ((i) == 0 ? WDT0_IRQn : \
+ (i) == 1 ? WDT1_IRQn : 0)
+
+#define MXC_WDT_GET_IRQ_P(i) ((i) == 0 ? WDT0_P_IRQn : \
+ (i) == 1 ? WDT1_P_IRQn : 0)
+
+#define MXC_WDT_GET_BASE(i) ((i) == 0 ? MXC_BASE_WDT0 : \
+ (i) == 1 ? MXC_BASE_WDT1 : 0)
+
+#define MXC_WDT_GET_WDT(i) ((i) == 0 ? MXC_WDT0 : \
+ (i) == 1 ? MXC_WDT1 : 0)
+
+/*******************************************************************************/
+/* SPI Interface */
+
+#define MXC_CFG_SPI_INSTANCES (3)
+#define MXC_CFG_SPI_FIFO_DEPTH (16)
+
+#define MXC_BASE_SPI0 ((uint32_t)0x40030000UL)
+#define MXC_SPI0 ((mxc_spi_regs_t *)MXC_BASE_SPI0)
+
+#define MXC_BASE_SPI0_TXFIFO ((uint32_t)0x40100000UL)
+#define MXC_SPI0_TXFIFO ((mxc_spi_txfifo_regs_t *)MXC_BASE_SPI0_TXFIFO)
+#define MXC_BASE_SPI0_RXFIFO ((uint32_t)0x40100800UL)
+#define MXC_SPI0_RXFIFO ((mxc_spi_rxfifo_regs_t *)MXC_BASE_SPI0_RXFIFO)
+
+#define MXC_BASE_SPI1 ((uint32_t)0x40031000UL)
+#define MXC_SPI1 ((mxc_spi_regs_t *)MXC_BASE_SPI1)
+
+#define MXC_BASE_SPI1_TXFIFO ((uint32_t)0x40101000UL)
+#define MXC_SPI1_TXFIFO ((mxc_spi_txfifo_regs_t *)MXC_BASE_SPI1_TXFIFO)
+#define MXC_BASE_SPI1_RXFIFO ((uint32_t)0x40101800UL)
+#define MXC_SPI1_RXFIFO ((mxc_spi_rxfifo_regs_t *)MXC_BASE_SPI1_RXFIFO)
+
+#define MXC_BASE_SPI2 ((uint32_t)0x40032000UL)
+#define MXC_SPI2 ((mxc_spi_regs_t *)MXC_BASE_SPI2)
+
+#define MXC_BASE_SPI2_TXFIFO ((uint32_t)0x40102000UL)
+#define MXC_SPI2_TXFIFO ((mxc_spi_txfifo_regs_t *)MXC_BASE_SPI2_TXFIFO)
+#define MXC_BASE_SPI2_RXFIFO ((uint32_t)0x40102800UL)
+#define MXC_SPI2_RXFIFO ((mxc_spi_rxfifo_regs_t *)MXC_BASE_SPI2_RXFIFO)
+
+
+#define MXC_SPI_GET_IRQ(i) ((i) == 0 ? SPI0_IRQn : \
+ (i) == 1 ? SPI1_IRQn : \
+ (i) == 2 ? SPI2_IRQn : 0)
+
+#define MXC_SPI_GET_BASE(i) ((i) == 0 ? MXC_BASE_SPI0 : \
+ (i) == 1 ? MXC_BASE_SPI1 : \
+ (i) == 2 ? MXC_BASE_SPI2 : 0)
+
+#define MXC_SPI_GET_SPI(i) ((i) == 0 ? MXC_SPI0 : \
+ (i) == 1 ? MXC_SPI1 : \
+ (i) == 2 ? MXC_SPI2 : 0)
+
+#define MXC_SPI_GET_RXFIFO(i) ((i) == 0 ? MXC_SPI0_RXFIFO : \
+ (i) == 1 ? MXC_SPI1_RXFIFO : \
+ (i) == 2 ? MXC_SPI2_RXFIFO : 0)
+
+#define MXC_SPI_GET_TXFIFO(i) ((i) == 0 ? MXC_SPI0_TXFIFO : \
+ (i) == 1 ? MXC_SPI1_TXFIFO : \
+ (i) == 2 ? MXC_SPI2_TXFIFO : 0)
+
+#define MXC_SPI_INSTANCE_TO_BASE(instance) (((uint32_t)(instance) << 12) + MXC_BASE_SPI0)
+#define MXC_SPI_BASE_TO_INSTANCE(base) (((uint32_t)(base) & 0x00003000) >> 12)
+
+
+/*******************************************************************************/
+/* UART Interface */
+
+#define MXC_CFG_UART_INSTANCES (2)
+
+#define MXC_BASE_UART0 ((uint32_t)0x40038000UL)
+#define MXC_BASE_UART0_BITBAND ((uint32_t)0x42700000UL)
+#define MXC_UART0 ((mxc_uart_regs_t *)MXC_BASE_UART0)
+
+#define MXC_BASE_UART1 ((uint32_t)0x40039000UL)
+#define MXC_BASE_UART1_BITBAND ((uint32_t)0x42720000UL)
+#define MXC_UART1 ((mxc_uart_regs_t *)MXC_BASE_UART1)
+
+
+#define MXC_UART_GET_IRQ(i) ((i) == 0 ? UART0_IRQn : \
+ (i) == 1 ? UART1_IRQn : 0)
+
+#define MXC_UART_GET_BASE(i) ((i) == 0 ? MXC_BASE_UART0 : \
+ (i) == 1 ? MXC_BASE_UART1 : 0)
+
+#define MXC_UART_GET_UART(i) ((i) == 0 ? MXC_UART0 : \
+ (i) == 1 ? MXC_UART1 : 0)
+
+#define MXC_UART_INSTANCE_TO_BASE(instance) (((uint32_t)(instance) << 12) + MXC_BASE_UART0)
+#define MXC_UART_BASE_TO_INSTANCE(base) (((uint32_t)(base) & 0x00001000) >> 12)
+
+
+/*******************************************************************************/
+/* I2C Master Interface */
+
+#define MXC_CFG_I2CM_INSTANCES (2)
+
+#define MXC_BASE_I2CM0 ((uint32_t)0x40040000UL)
+#define MXC_BASE_I2CM0_BITBAND ((uint32_t)0x42800000UL)
+#define MXC_I2CM0 ((mxc_i2cm_regs_t *)MXC_BASE_I2CM0)
+#define MXC_BASE_I2CM0_TX_FIFO ((uint32_t)0x40103000UL)
+#define MXC_BASE_I2CM0_RX_FIFO ((uint32_t)0x40103800UL)
+
+#define MXC_BASE_I2CM1 ((uint32_t)0x40042000UL)
+#define MXC_BASE_I2CM1_BITBAND ((uint32_t)0x42840000UL)
+#define MXC_I2CM1 ((mxc_i2cm_regs_t *)MXC_BASE_I2CM1)
+#define MXC_BASE_I2CM1_TX_FIFO ((uint32_t)0x4010D000UL)
+#define MXC_BASE_I2CM1_RX_FIFO ((uint32_t)0x4010D800UL)
+
+#define MXC_I2CM_GET_IRQ(i) ((i) == 0 ? I2CM0_IRQn : \
+ (i) == 1 ? I2CM1_IRQn : 0)
+
+#define MXC_I2CM_GET_BASE(i) ((i) == 0 ? MXC_BASE_I2CM0 : \
+ (i) == 1 ? MXC_BASE_I2CM1 : 0)
+
+#define MXC_I2CM_GET_I2CM(i) ((i) == 0 ? MXC_I2CM0 : \
+ (i) == 1 ? MXC_I2CM1 : 0)
+
+#define MXC_I2CM_GET_BASE_TX_FIFO(i) ((i) == 0 ? MXC_BASE_I2CM0_TX_FIFO : \
+ (i) == 1 ? MXC_BASE_I2CM1_TX_FIFO : 0)
+
+#define MXC_I2CM_GET_BASE_RX_FIFO(i) ((i) == 0 ? MXC_BASE_I2CM0_RX_FIFO : \
+ (i) == 1 ? MXC_BASE_I2CM1_RX_FIFO : 0)
+
+#define MXC_I2CM_INSTANCE_TO_BASE(instance) (((uint32_t)(instance) << 13) + MXC_BASE_I2CM0)
+#define MXC_I2CM_BASE_TO_INSTANCE(base) (((uint32_t)(base) & 0x00002000) >> 13)
+
+
+/*******************************************************************************/
+/* I2C Slave Interface */
+
+#define MXC_CFG_I2CS_INSTANCES (1)
+
+#define MXC_BASE_I2CS0 ((uint32_t)0x40041000UL)
+#define MXC_BASE_I2CS0_BITBAND ((uint32_t)0x42820000UL)
+#define MXC_I2CS0 ((mxc_i2cs_regs_t *)MXC_BASE_I2CS0)
+
+#define MXC_BASE_I2CS0_FIFO ((uint32_t)0x40104000UL)
+#define MXC_I2CS0_FIFO ((mxc_i2cs_fifo_regs_t *)MXC_BASE_I2CS0)
+
+
+
+/*******************************************************************************/
+/* DACs */
+
+#define MXC_CFG_DAC_INSTANCES (4)
+#define MXC_CFG_DAC_FIFO_DEPTH (32)
+
+#define MXC_BASE_DAC0 ((uint32_t)0x40050000UL)
+#define MXC_DAC0 ((mxc_dac_regs_t *)MXC_BASE_DAC0)
+#define MXC_BASE_DAC0_FIFO ((uint32_t)0x40105000UL)
+#define MXC_DAC0_FIFO ((mxc_dac_fifo_regs_t *)MXC_BASE_DAC0_FIFO)
+#define MXC_DAC0_WIDTH ((uint8_t)(2))
+
+#define MXC_BASE_DAC1 ((uint32_t)0x40051000UL)
+#define MXC_DAC1 ((mxc_dac_regs_t *)MXC_BASE_DAC1)
+#define MXC_BASE_DAC1_FIFO ((uint32_t)0x40106000UL)
+#define MXC_DAC1_FIFO ((mxc_dac_fifo_regs_t *)MXC_BASE_DAC1_FIFO)
+#define MXC_DAC1_WIDTH ((uint8_t)(2))
+
+#define MXC_BASE_DAC2 ((uint32_t)0x40052000UL)
+#define MXC_DAC2 ((mxc_dac_regs_t *)MXC_BASE_DAC2)
+#define MXC_BASE_DAC2_FIFO ((uint32_t)0x40107000UL)
+#define MXC_DAC2_FIFO ((mxc_dac_fifo_regs_t *)MXC_BASE_DAC2_FIFO)
+#define MXC_DAC2_WIDTH ((uint8_t)(1))
+
+#define MXC_BASE_DAC3 ((uint32_t)0x40053000UL)
+#define MXC_DAC3 ((mxc_dac_regs_t *)MXC_BASE_DAC3)
+#define MXC_BASE_DAC3_FIFO ((uint32_t)0x40108000UL)
+#define MXC_DAC3_FIFO ((mxc_dac_fifo_regs_t *)MXC_BASE_DAC3_FIFO)
+#define MXC_DAC3_WIDTH ((uint8_t)(1))
+
+
+#define MXC_DAC_GET_IRQ(i) ((i) == 0 ? DAC0_IRQn : \
+ (i) == 1 ? DAC1_IRQn : \
+ (i) == 2 ? DAC2_IRQn : \
+ (i) == 3 ? DAC3_IRQn : 0)
+
+
+#define MXC_DAC_GET_BASE(i) (i == 0 ? MXC_BASE_DAC0 : \
+ i == 1 ? MXC_BASE_DAC1 : \
+ i == 2 ? MXC_BASE_DAC2 : \
+ i == 3 ? MXC_BASE_DAC3 : 0)
+
+#define MXC_DAC_GET_FIFO(i) (i == 0 ? MXC_BASE_DAC0_FIFO : \
+ i == 1 ? MXC_BASE_DAC1_FIFO : \
+ i == 2 ? MXC_BASE_DAC2_FIFO : \
+ i == 3 ? MXC_BASE_DAC3_FIFO : 0)
+
+#define MXC_DAC_GET_PMU_FIFO_IRQ(i) (i == 0 ? PMU_IRQ_DAC0_FIFO_AE : \
+ i == 1 ? PMU_IRQ_DAC1_FIFO_AE : \
+ i == 2 ? PMU_IRQ_DAC2_FIFO_AE : \
+ i == 3 ? PMU_IRQ_DAC3_FIFO_AE : 0)
+
+#define MXC_DAC_GET_DAC(i) (i == 0 ? MXC_DAC0 : \
+ i == 1 ? MXC_DAC1 : \
+ i == 2 ? MXC_DAC2 : \
+ i == 3 ? MXC_DAC3 : 0)
+
+#define MXC_DAC_GET_WIDTH(i) (i == 0 ? MXC_DAC0_WIDTH : \
+ i == 1 ? MXC_DAC1_WIDTH : \
+ i == 2 ? MXC_DAC2_WIDTH : \
+ i == 3 ? MXC_DAC3_WIDTH : 0)
+
+
+/*******************************************************************************/
+/* Analog Front End */
+
+#define MXC_BASE_AFE ((uint32_t)0x4005401CUL)
+#define MXC_AFE ((mxc_afe_regs_t *)MXC_BASE_AFE)
+
+
+
+/*******************************************************************************/
+/* ADC */
+
+#define MXC_CFG_ADC_FIFO_DEPTH ((uint32_t)(32))
+
+#define MXC_BASE_ADC ((uint32_t)0x40054000UL)
+#define MXC_ADC ((mxc_adc_regs_t *)MXC_BASE_ADC)
+
+#define MXC_BASE_ADCCFG ((uint32_t)0x40054038UL)
+#define MXC_ADCCFG ((mxc_adccfg_regs_t *)MXC_BASE_ADCCFG)
+
+#define MXC_BASE_ADC_FIFO ((uint32_t)0x40109000UL)
+#define MXC_ADC_FIFO ((mxc_adc_fifo_regs_t *)MXC_BASE_ADC_FIFO)
+
+
+
+/*******************************************************************************/
+/* LCD */
+#define MXC_BASE_LCD ((uint32_t)0x40060000)
+#define MXC_LCD ((mxc_lcd_regs_t *)MXC_BASE_LCD)
+
+/*******************************************************************************/
+/* Peripheral Management Unit (PMU) - formerly DMA Controller */
+
+#define MXC_CFG_PMU_CHANNELS (6)
+
+#define MXC_BASE_PMU0 ((uint32_t)0x40070000UL)
+#define MXC_PMU0 ((mxc_pmu_regs_t *)MXC_BASE_PMU0)
+#define MXC_BASE_PMU1 ((uint32_t)0x40070020UL)
+#define MXC_PMU1 ((mxc_pmu_regs_t *)MXC_BASE_PMU1)
+#define MXC_BASE_PMU2 ((uint32_t)0x40070040UL)
+#define MXC_PMU2 ((mxc_pmu_regs_t *)MXC_BASE_PMU2)
+#define MXC_BASE_PMU3 ((uint32_t)0x40070060UL)
+#define MXC_PMU3 ((mxc_pmu_regs_t *)MXC_BASE_PMU3)
+#define MXC_BASE_PMU4 ((uint32_t)0x40070080UL)
+#define MXC_PMU4 ((mxc_pmu_regs_t *)MXC_BASE_PMU4)
+#define MXC_BASE_PMU5 ((uint32_t)0x400700A0UL)
+#define MXC_PMU5 ((mxc_pmu_regs_t *)MXC_BASE_PMU5)
+
+#define MXC_BASE_PMU_BITBAND ((uint32_t)0x42E00000UL)
+#define MXC_BASE_PMU_BITBAND_CHOFFSET ((uint32_t)0x00000400UL)
+/*******************************************************************************/
+
+typedef enum {
+ PMU_IRQ_DAC0_FIFO_AE,
+ PMU_IRQ_DAC1_FIFO_AE,
+ PMU_IRQ_DAC2_FIFO_AE,
+ PMU_IRQ_DAC3_FIFO_AE,
+ PMU_IRQ_DAC0_DONE,
+ PMU_IRQ_DAC1_DONE,
+ PMU_IRQ_DAC2_DONE,
+ PMU_IRQ_DAC3_DONE,
+ PMU_IRQ_ADC_FIFO_AF,
+ PMU_IRQ_ADC_DONE,
+ PMU_IRQ_I2C_MST0_DONE,
+ PMU_IRQ_I2C_MST1_DONE,
+ PMU_IRQ_SPI0_RSLTS_DONE,
+ PMU_IRQ_SPI1_RSLTS_DONE,
+ PMU_IRQ_SPI2_RSLTS_DONE,
+ PMU_IRQ_MAA_DONE,
+ PMU_IRQ_SPI0_TX_FIFO_AE,
+ PMU_IRQ_SPI0_RSLTS_FIFO_AF,
+ PMU_IRQ_SPI1_TX_FIFO_AE,
+ PMU_IRQ_SPI1_RSLTS_FIFO_AF,
+ PMU_IRQ_SPI2_TX_FIFO_AE,
+ PMU_IRQ_SPI3_RSLTS_FIFO_AF,
+ PMU_IRQ_I2C_MST0_TRANS_FIFO,
+ PMU_IRQ_I2C_MST0_RSLT_FIFO,
+ PMU_IRQ_I2C_MST1_TRANS_FIFO,
+ PMU_IRQ_I2C_MST2_RSLT_FIFO,
+ PMU_IRQ_I2C_SLV_TRANS_FIFO,
+ PMU_IRQ_I2C_SLV_RSLT_FIFO,
+ PMU_IRQ_UART0_TX_FIFO,
+ PMU_IRQ_UART0_RX_FIFO,
+ PMU_IRQ_UART1_TX_FIFO,
+ PMU_IRQ_UART1_RX_FIFO,
+ PMU_IRQ_SPI0_EXCP,
+ PMU_IRQ_SPI1_EXCP,
+ PMU_IRQ_SPI2_EXCP,
+ PMU_IRQ_RSVD0,
+ PMU_IRQ_I2C_MST0_EXCP,
+ PMU_IRQ_I2C_MST1_EXCP,
+ PMU_IRQ_I2C_SLV_EXCP,
+ PMU_IRQ_RSVD1,
+ PMU_IRQ_GPIO0,
+ PMU_IRQ_GPIO1,
+ PMU_IRQ_GPIO2,
+ PMU_IRQ_GPIO3,
+ PMU_IRQ_GPIO4,
+ PMU_IRQ_GPIO5,
+ PMU_IRQ_GPIO6,
+ PMU_IRQ_GPIO7,
+ PMU_IRQ_GPIO8,
+ PMU_IRQ_AFE_COMP_NMI,
+ PMU_IRQ_AES_ENGINE,
+} pmu_int_mask_t;
+
+/*******************************************************************************/
+/* USB */
+
+#define MXC_BASE_USB ((uint32_t)0x4010C000UL)
+#define MXC_USB ((mxc_usb_regs_t *)MXC_BASE_USB)
+
+#define MXC_USB_MAX_PACKET (64)
+#define MXC_USB_NUM_EP (8)
+
+
+/*******************************************************************************/
+/* Instruction Cache Controller */
+
+#define MXC_BASE_ICC ((uint32_t)0x40080000UL)
+#define MXC_ICC ((mxc_icc_regs_t *)MXC_BASE_ICC)
+
+/* System Manager */
+
+#define MXC_BASE_SYSMAN ((uint32_t)0x40090000UL)
+
+/*******************************************************************************/
+/* Clock Manager */
+
+#define MXC_BASE_CLKMAN ((uint32_t)0x40090400UL)
+#define MXC_CLKMAN ((mxc_clkman_regs_t *)MXC_BASE_CLKMAN)
+
+
+/*******************************************************************************/
+/* Power Manager */
+
+#define MXC_BASE_PWRMAN ((uint32_t)0x40090800UL)
+#define MXC_PWRMAN ((mxc_pwrman_regs_t *)MXC_BASE_PWRMAN)
+
+/*******************************************************************************/
+/* I/O Manager */
+
+#define MXC_BASE_IOMAN ((uint32_t)0x40090C00UL)
+#define MXC_IOMAN ((mxc_ioman_regs_t *)MXC_BASE_IOMAN)
+
+
+/*******************************************************************************/
+/* RTC: Timer/Alarms */
+
+#define MXC_BASE_RTCTMR ((uint32_t)0x40090A00UL)
+#define MXC_RTCTMR ((mxc_rtctmr_regs_t *)MXC_BASE_RTCTMR)
+
+#define MXC_RTCTMR_GET_IRQ(i) (i == 0 ? RTC0_IRQn : \
+ i == 1 ? RTC1_IRQn : \
+ i == 2 ? RTC2_IRQn : \
+ i == 3 ? RTC3_IRQn : 0)
+
+#define MXC_BASE_RTCCFG ((uint32_t)0x40090A70UL)
+#define MXC_RTCCFG ((mxc_rtccfg_regs_t *)MXC_BASE_RTCCFG)
+/*******************************************************************************/
+/* RTC: Power Sequencer */
+
+#define MXC_BASE_PWRSEQ ((uint32_t)0x40090A30UL)
+#define MXC_PWRSEQ ((mxc_pwrseq_regs_t *)MXC_BASE_PWRSEQ)
+
+/*******************************************************************************/
+/* Trim Shadow Registers */
+
+#define MXC_BASE_TRIM ((uint32_t)0x400E0000UL)
+#define MXC_TRIM ((mxc_ftr_regs_t *)MXC_BASE_TRIM)
+
+/*******************************************************************************/
+/* Flash Memory Controller / Security */
+
+#define MXC_BASE_FLC ((uint32_t)0x400F0000UL)
+#define MXC_FLC ((mxc_flc_regs_t *)MXC_BASE_FLC)
+#define MXC_BASE_FLC_BITBAND ((uint32_t)0x43E00000UL)
+#define MXC_FLC_PAGE_SIZE_SHIFT 11
+#define MXC_FLC_PAGE_SIZE (1 << MXC_FLC_PAGE_SIZE_SHIFT)
+#define MXC_FLC_PAGE_ERASE_MSK ((~(1 << (MXC_FLC_PAGE_SIZE_SHIFT - 1))) >> MXC_FLC_PAGE_SIZE_SHIFT) << MXC_FLC_PAGE_SIZE_SHIFT
+
+/*******************************************************************************/
+
+#define MXC_SET_FIELD(reg, clr, set) (*(volatile uint32_t *)reg = ((*(volatile uint32_t *)reg & ~clr) | set))
+
+/*******************************************************************************/
+
+#define BITBAND(reg, bit) ((0xf0000000 & (uint32_t)(reg)) + 0x2000000 + (((uint32_t)(reg) & 0x0fffffff) << 5) + ((bit) << 2))
+#define BITBAND_ClrBit(reg, bit) *(volatile uint32_t *)BITBAND(reg, bit) = 0
+#define BITBAND_SetBit(reg, bit) *(volatile uint32_t *)BITBAND(reg, bit) = 1
+#define BITBAND_GetBit(reg, bit) (*(volatile uint32_t *)BITBAND(reg, bit))
+
+/*******************************************************************************/
+
+#endif /* _MAX32600_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/pmu_regs.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,111 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef _MXC_PMU_REGS_H_
+#define _MXC_PMU_REGS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/**
+ * @file pmu_regs.h
+ * @addtogroup pmu PMU
+ * @{
+ */
+
+/* Offset Register Description
+ ====== ======================================================== */
+typedef struct {
+ __IO uint32_t dscadr; /* 0x0000 Starting Descriptor Address */
+ __IO uint32_t cfg; /* 0x0004 Channel Configuration */
+ __IO uint32_t loop; /* 0x0008 Channel Loop Counters */
+ __IO uint32_t op; /* 0x000C Current Descriptor DWORD 0 (OP) */
+ __IO uint32_t dsc1; /* 0x0010 Current Descriptor DWORD 1 */
+ __IO uint32_t dsc2; /* 0x0014 Current Descriptor DWORD 2 */
+ __IO uint32_t dsc3; /* 0x0018 Current Descriptor DWORD 3 */
+ __IO uint32_t dsc4; /* 0x001C Current Descriptor DWORD 4 */
+} mxc_pmu_regs_t;
+
+/*
+ Register offsets for module PMU.
+*/
+#define MXC_R_PMU_OFFS_DSCADR ((uint32_t)0x00000000UL)
+#define MXC_R_PMU_OFFS_CFG ((uint32_t)0x00000004UL)
+#define MXC_R_PMU_OFFS_LOOP ((uint32_t)0x00000008UL)
+#define MXC_R_PMU_OFFS_OP ((uint32_t)0x0000000CUL)
+#define MXC_R_PMU_OFFS_DSC1 ((uint32_t)0x00000010UL)
+#define MXC_R_PMU_OFFS_DSC2 ((uint32_t)0x00000014UL)
+#define MXC_R_PMU_OFFS_DSC3 ((uint32_t)0x00000018UL)
+#define MXC_R_PMU_OFFS_DSC4 ((uint32_t)0x0000001CUL)
+
+/*
+ Field positions and masks for module PMU.
+*/
+#define MXC_F_PMU_CFG_ENABLE_POS 0
+#define MXC_F_PMU_CFG_ENABLE ((uint32_t)(0x00000001UL << MXC_F_PMU_CFG_ENABLE_POS))
+#define MXC_F_PMU_CFG_LL_STOPPED_POS 2
+#define MXC_F_PMU_CFG_LL_STOPPED ((uint32_t)(0x00000001UL << MXC_F_PMU_CFG_LL_STOPPED_POS))
+#define MXC_F_PMU_CFG_MANUAL_POS 3
+#define MXC_F_PMU_CFG_MANUAL ((uint32_t)(0x00000001UL << MXC_F_PMU_CFG_MANUAL_POS))
+#define MXC_F_PMU_CFG_BUS_ERROR_POS 4
+#define MXC_F_PMU_CFG_BUS_ERROR ((uint32_t)(0x00000001UL << MXC_F_PMU_CFG_BUS_ERROR_POS))
+#define MXC_F_PMU_CFG_TO_STAT_POS 6
+#define MXC_F_PMU_CFG_TO_STAT ((uint32_t)(0x00000001UL << MXC_F_PMU_CFG_TO_STAT_POS))
+#define MXC_F_PMU_CFG_TO_SEL_POS 11
+#define MXC_F_PMU_CFG_TO_SEL ((uint32_t)(0x00000007UL << MXC_F_PMU_CFG_TO_SEL_POS))
+#define MXC_F_PMU_CFG_PS_SEL_POS 14
+#define MXC_F_PMU_CFG_PS_SEL ((uint32_t)(0x00000003UL << MXC_F_PMU_CFG_PS_SEL_POS))
+#define MXC_F_PMU_CFG_INTERRUPT_POS 16
+#define MXC_F_PMU_CFG_INTERRUPT ((uint32_t)(0x00000001UL << MXC_F_PMU_CFG_INTERRUPT_POS))
+#define MXC_F_PMU_CFG_INT_EN_POS 17
+#define MXC_F_PMU_CFG_INT_EN ((uint32_t)(0x00000001UL << MXC_F_PMU_CFG_INT_EN_POS))
+#define MXC_F_PMU_CFG_BURST_SIZE_POS 24
+#define MXC_F_PMU_CFG_BURST_SIZE ((uint32_t)(0x0000001FUL << MXC_F_PMU_CFG_BURST_SIZE_POS))
+
+#define MXC_F_PMU_LOOP_COUNTER_0_POS 0
+#define MXC_F_PMU_LOOP_COUNTER_0 ((uint32_t)(0x0000FFFFUL << MXC_F_PMU_LOOP_COUNTER_0_POS))
+#define MXC_F_PMU_LOOP_COUNTER_1_POS 16
+#define MXC_F_PMU_LOOP_COUNTER_1 ((uint32_t)(0x0000FFFFUL << MXC_F_PMU_LOOP_COUNTER_1_POS))
+
+#ifdef __cplusplus
+}
+#endif
+
+/**
+* @}
+*/
+
+#endif /* _MXC_PMU_REGS_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/pt_regs.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,175 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef _MXC_PT_REGS_H_
+#define _MXC_PT_REGS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/**
+ * @file pt_regs.h
+ * @addtogroup pt PT
+ * @{
+ */
+
+typedef struct {
+ __IO uint32_t ctrl;
+ __IO uint32_t resync;
+} mxc_ptg_regs_t;
+
+/* Offset Register Description
+ ====== ================================================== */
+typedef struct {
+ __IO uint32_t rate_length; /* 0x0000 Pulse train Output length and rate */
+ __IO uint32_t train; /* 0x0004 Pulse Train Output Pattern */
+} mxc_pt_regs_t;
+
+/*
+ Register offsets for module PT.
+*/
+#define MXC_R_PTG_OFFS_CTRL ((uint32_t)0x00000000UL)
+#define MXC_R_PTG_OFFS_RESYNC ((uint32_t)0x00000004UL)
+#define MXC_R_PT_OFFS_RATE_LENGTH ((uint32_t)0x00000000UL)
+#define MXC_R_PT_OFFS_TRAIN ((uint32_t)0x00000004UL)
+
+
+/*
+ Field positions and masks for module PT.
+*/
+#define MXC_F_PT_CTRL_ENABLE_ALL_POS 1
+#define MXC_F_PT_CTRL_ENABLE_ALL ((uint32_t)(0x00000001UL << MXC_F_PT_CTRL_ENABLE_ALL_POS))
+
+#define MXC_F_PT_RESYNC_PT0_POS 0
+#define MXC_F_PT_RESYNC_PT0 ((uint32_t)(0x00000001UL << MXC_F_PT_RESYNC_PT0_POS))
+#define MXC_F_PT_RESYNC_PT1_POS 1
+#define MXC_F_PT_RESYNC_PT1 ((uint32_t)(0x00000001UL << MXC_F_PT_RESYNC_PT1_POS))
+#define MXC_F_PT_RESYNC_PT2_POS 2
+#define MXC_F_PT_RESYNC_PT2 ((uint32_t)(0x00000001UL << MXC_F_PT_RESYNC_PT2_POS))
+#define MXC_F_PT_RESYNC_PT3_POS 3
+#define MXC_F_PT_RESYNC_PT3 ((uint32_t)(0x00000001UL << MXC_F_PT_RESYNC_PT3_POS))
+#define MXC_F_PT_RESYNC_PT4_POS 4
+#define MXC_F_PT_RESYNC_PT4 ((uint32_t)(0x00000001UL << MXC_F_PT_RESYNC_PT4_POS))
+#define MXC_F_PT_RESYNC_PT5_POS 5
+#define MXC_F_PT_RESYNC_PT5 ((uint32_t)(0x00000001UL << MXC_F_PT_RESYNC_PT5_POS))
+#define MXC_F_PT_RESYNC_PT6_POS 6
+#define MXC_F_PT_RESYNC_PT6 ((uint32_t)(0x00000001UL << MXC_F_PT_RESYNC_PT6_POS))
+#define MXC_F_PT_RESYNC_PT7_POS 7
+#define MXC_F_PT_RESYNC_PT7 ((uint32_t)(0x00000001UL << MXC_F_PT_RESYNC_PT7_POS))
+
+#define MXC_F_PT_RATE_LENGTH_RATE_CONTROL_POS 0
+#define MXC_F_PT_RATE_LENGTH_RATE_CONTROL ((uint32_t)(0x07FFFFFFUL << MXC_F_PT_RATE_LENGTH_RATE_CONTROL_POS))
+#define MXC_F_PT_RATE_LENGTH_MODE_POS 27
+#define MXC_F_PT_RATE_LENGTH_MODE ((uint32_t)(0x0000001FUL << MXC_F_PT_RATE_LENGTH_MODE_POS))
+
+/*
+ Field values and shifted values for module PT.
+*/
+#define MXC_V_PT_RATE_LENGTH_MODE_32_BIT_PATTERN ((uint32_t)(0x0x00000000UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_SQUARE_WAVE ((uint32_t)(0x0x00000001UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_2_BIT_PATTERN ((uint32_t)(0x0x00000002UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_3_BIT_PATTERN ((uint32_t)(0x0x00000003UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_4_BIT_PATTERN ((uint32_t)(0x0x00000004UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_5_BIT_PATTERN ((uint32_t)(0x0x00000005UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_6_BIT_PATTERN ((uint32_t)(0x0x00000006UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_7_BIT_PATTERN ((uint32_t)(0x0x00000007UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_8_BIT_PATTERN ((uint32_t)(0x0x00000008UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_9_BIT_PATTERN ((uint32_t)(0x0x00000009UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_10_BIT_PATTERN ((uint32_t)(0x0x00000010UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_11_BIT_PATTERN ((uint32_t)(0x0x00000011UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_12_BIT_PATTERN ((uint32_t)(0x0x00000012UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_13_BIT_PATTERN ((uint32_t)(0x0x00000013UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_14_BIT_PATTERN ((uint32_t)(0x0x00000014UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_15_BIT_PATTERN ((uint32_t)(0x0x00000015UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_16_BIT_PATTERN ((uint32_t)(0x0x00000016UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_17_BIT_PATTERN ((uint32_t)(0x0x00000017UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_18_BIT_PATTERN ((uint32_t)(0x0x00000018UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_19_BIT_PATTERN ((uint32_t)(0x0x00000019UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_20_BIT_PATTERN ((uint32_t)(0x0x00000020UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_21_BIT_PATTERN ((uint32_t)(0x0x00000021UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_22_BIT_PATTERN ((uint32_t)(0x0x00000022UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_23_BIT_PATTERN ((uint32_t)(0x0x00000023UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_24_BIT_PATTERN ((uint32_t)(0x0x00000024UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_25_BIT_PATTERN ((uint32_t)(0x0x00000025UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_26_BIT_PATTERN ((uint32_t)(0x0x00000026UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_27_BIT_PATTERN ((uint32_t)(0x0x00000027UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_28_BIT_PATTERN ((uint32_t)(0x0x00000028UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_29_BIT_PATTERN ((uint32_t)(0x0x00000029UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_30_BIT_PATTERN ((uint32_t)(0x0x00000030UL))
+#define MXC_V_PT_RATE_LENGTH_MODE_31_BIT_PATTERN ((uint32_t)(0x0x00000031UL))
+
+#define MXC_S_PT_RATE_LENGTH_MODE_32_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_32_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_SQUARE_WAVE ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_SQUARE_WAVE << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_2_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_2_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_3_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_3_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_4_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_4_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_5_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_5_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_6_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_6_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_7_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_7_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_8_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_8_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_9_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_9_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_10_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_10_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_11_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_11_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_12_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_12_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_13_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_13_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_14_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_14_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_15_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_15_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_16_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_16_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_17_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_17_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_18_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_18_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_19_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_19_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_20_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_20_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_21_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_21_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_22_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_22_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_23_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_23_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_24_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_24_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_25_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_25_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_26_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_26_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_27_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_27_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_28_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_28_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_29_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_29_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_30_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_30_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+#define MXC_S_PT_RATE_LENGTH_MODE_31_BIT_PATTERN ((uint32_t)(MXC_V_PT_RATE_LENGTH_MODE_31_BIT_PATTERN << MXC_F_PT_RATE_LENGTH_MODE_POS))
+
+#ifdef __cplusplus
+}
+#endif
+
+/**
+* @}
+*/
+
+#endif /* _MXC_PT_REGS_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/pwrman_regs.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,386 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef _MXC_PWRMAN_REGS_H_
+#define _MXC_PWRMAN_REGS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/**
+ * @file pwrman_regs.h
+ * @addtogroup pwrman PWRMAN
+ * @{
+ */
+
+/**
+ * @brief Defines PAD Modes for Wake Up Detection.
+ */
+typedef enum {
+ /** WUD Mode for Selected PAD = Clear/Activate */
+ MXC_E_PWRMAN_PAD_MODE_CLEAR_SET,
+ /** WUD Mode for Selected PAD = Set WUD Act Hi/Set WUD Act Lo */
+ MXC_E_PWRMAN_PAD_MODE_ACT_HI_LO,
+ /** WUD Mode for Selected PAD = Set Weak Hi/ Set Weak Lo */
+ MXC_E_PWRMAN_PAD_MODE_WEAK_HI_LO,
+ /** WUD Mode for Selected PAD = No pad state change */
+ MXC_E_PWRMAN_PAD_MODE_NONE
+} mxc_pwrman_pad_mode_t;
+
+/* Offset Register Description
+ ====== =========================================== */
+typedef struct {
+ __IO uint32_t pwr_rst_ctrl; /* 0x0000 Power Reset Control and Status */
+ __IO uint32_t intfl; /* 0x0004 Interrupt Flags */
+ __IO uint32_t inten; /* 0x0008 Interrupt Enable/Disable Controls */
+ __IO uint32_t svm_events; /* 0x000C SVM Event Status Flags (read-only) */
+ __IO uint32_t wud_ctrl; /* 0x0010 Wake-Up Detect Control */
+ __IO uint32_t wud_pulse0; /* 0x0014 WUD Pulse To Mode Bit 0 */
+ __IO uint32_t wud_pulse1; /* 0x0018 WUD Pulse To Mode Bit 1 */
+ __I uint32_t rsv001C[5]; /* 0x001C */
+
+ __IO uint32_t wud_seen0; /* 0x0030 Wake-up Detect Status for P0/P1/P2/P3 */
+ __IO uint32_t wud_seen1; /* 0x0034 Wake-up Detect Status for P4/P5/P6/P7 */
+ __IO uint32_t die_type; /* 0x0038 Die ID Register (Device Type) */
+ __IO uint32_t base_part_num; /* 0x003C Base Part Number */
+ __IO uint32_t mask_id0; /* 0x0040 Mask ID Register 0 */
+ __IO uint32_t mask_id1; /* 0x0044 Mask ID Register 1 */
+ __IO uint32_t peripheral_reset; /* 0x0048 Peripheral Reset Control Register */
+} mxc_pwrman_regs_t;
+
+/*
+ Register offsets for module PWRMAN.
+*/
+#define MXC_R_PWRMAN_OFFS_PWR_RST_CTRL ((uint32_t)0x00000000UL)
+#define MXC_R_PWRMAN_OFFS_INTFL ((uint32_t)0x00000004UL)
+#define MXC_R_PWRMAN_OFFS_INTEN ((uint32_t)0x00000008UL)
+#define MXC_R_PWRMAN_OFFS_SVM_EVENTS ((uint32_t)0x0000000CUL)
+#define MXC_R_PWRMAN_OFFS_WUD_CTRL ((uint32_t)0x00000010UL)
+#define MXC_R_PWRMAN_OFFS_WUD_PULSE0 ((uint32_t)0x00000014UL)
+#define MXC_R_PWRMAN_OFFS_WUD_PULSE1 ((uint32_t)0x00000018UL)
+#define MXC_R_PWRMAN_OFFS_WUD_SEEN0 ((uint32_t)0x00000030UL)
+#define MXC_R_PWRMAN_OFFS_WUD_SEEN1 ((uint32_t)0x00000034UL)
+#define MXC_R_PWRMAN_OFFS_DIE_TYPE ((uint32_t)0x00000038UL)
+#define MXC_R_PWRMAN_OFFS_BASE_PART_NUM ((uint32_t)0x0000003CUL)
+#define MXC_R_PWRMAN_OFFS_MASK_ID0 ((uint32_t)0x00000040UL)
+#define MXC_R_PWRMAN_OFFS_MASK_ID1 ((uint32_t)0x00000044UL)
+#define MXC_R_PWRMAN_OFFS_PERIPHERAL_RESET ((uint32_t)0x00000048UL)
+
+/*
+ Field positions and masks for module PWRMAN.
+*/
+#define MXC_F_PWRMAN_PWR_RST_CTRL_FLASH_ACTIVE_POS 0
+#define MXC_F_PWRMAN_PWR_RST_CTRL_FLASH_ACTIVE ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PWR_RST_CTRL_FLASH_ACTIVE_POS))
+#define MXC_F_PWRMAN_PWR_RST_CTRL_SRAM_ACTIVE_POS 1
+#define MXC_F_PWRMAN_PWR_RST_CTRL_SRAM_ACTIVE ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PWR_RST_CTRL_SRAM_ACTIVE_POS))
+#define MXC_F_PWRMAN_PWR_RST_CTRL_AFE_POWERED_POS 2
+#define MXC_F_PWRMAN_PWR_RST_CTRL_AFE_POWERED ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PWR_RST_CTRL_AFE_POWERED_POS))
+#define MXC_F_PWRMAN_PWR_RST_CTRL_IO_ACTIVE_POS 3
+#define MXC_F_PWRMAN_PWR_RST_CTRL_IO_ACTIVE ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PWR_RST_CTRL_IO_ACTIVE_POS))
+#define MXC_F_PWRMAN_PWR_RST_CTRL_USB_POWERED_POS 4
+#define MXC_F_PWRMAN_PWR_RST_CTRL_USB_POWERED ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PWR_RST_CTRL_USB_POWERED_POS))
+#define MXC_F_PWRMAN_PWR_RST_CTRL_PULLUPS_ENABLED_POS 5
+#define MXC_F_PWRMAN_PWR_RST_CTRL_PULLUPS_ENABLED ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PWR_RST_CTRL_PULLUPS_ENABLED_POS))
+#define MXC_F_PWRMAN_PWR_RST_CTRL_FIRMWARE_RESET_POS 8
+#define MXC_F_PWRMAN_PWR_RST_CTRL_FIRMWARE_RESET ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PWR_RST_CTRL_FIRMWARE_RESET_POS))
+#define MXC_F_PWRMAN_PWR_RST_CTRL_ARM_LOCKUP_RESET_POS 9
+#define MXC_F_PWRMAN_PWR_RST_CTRL_ARM_LOCKUP_RESET ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PWR_RST_CTRL_ARM_LOCKUP_RESET_POS))
+#define MXC_F_PWRMAN_PWR_RST_CTRL_WUD_CLEAR_POS 12
+#define MXC_F_PWRMAN_PWR_RST_CTRL_WUD_CLEAR ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PWR_RST_CTRL_WUD_CLEAR_POS))
+#define MXC_F_PWRMAN_PWR_RST_CTRL_TAMPER_DETECT_POS 16
+#define MXC_F_PWRMAN_PWR_RST_CTRL_TAMPER_DETECT ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PWR_RST_CTRL_TAMPER_DETECT_POS))
+#define MXC_F_PWRMAN_PWR_RST_CTRL_FW_COMMAND_SYSMAN_POS 17
+#define MXC_F_PWRMAN_PWR_RST_CTRL_FW_COMMAND_SYSMAN ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PWR_RST_CTRL_FW_COMMAND_SYSMAN_POS))
+#define MXC_F_PWRMAN_PWR_RST_CTRL_WATCHDOG_TIMEOUT_POS 18
+#define MXC_F_PWRMAN_PWR_RST_CTRL_WATCHDOG_TIMEOUT ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PWR_RST_CTRL_WATCHDOG_TIMEOUT_POS))
+#define MXC_F_PWRMAN_PWR_RST_CTRL_FW_COMMAND_ARM_POS 19
+#define MXC_F_PWRMAN_PWR_RST_CTRL_FW_COMMAND_ARM ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PWR_RST_CTRL_FW_COMMAND_ARM_POS))
+#define MXC_F_PWRMAN_PWR_RST_CTRL_ARM_LOCKUP_POS 20
+#define MXC_F_PWRMAN_PWR_RST_CTRL_ARM_LOCKUP ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PWR_RST_CTRL_ARM_LOCKUP_POS))
+#define MXC_F_PWRMAN_PWR_RST_CTRL_SRSTN_ASSERTION_POS 21
+#define MXC_F_PWRMAN_PWR_RST_CTRL_SRSTN_ASSERTION ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PWR_RST_CTRL_SRSTN_ASSERTION_POS))
+#define MXC_F_PWRMAN_PWR_RST_CTRL_POR_POS 22
+#define MXC_F_PWRMAN_PWR_RST_CTRL_POR ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PWR_RST_CTRL_POR_POS))
+#define MXC_F_PWRMAN_PWR_RST_CTRL_LOW_POWER_MODE_POS 31
+#define MXC_F_PWRMAN_PWR_RST_CTRL_LOW_POWER_MODE ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PWR_RST_CTRL_LOW_POWER_MODE_POS))
+
+#define MXC_F_PWRMAN_INTFL_V1_8_WARNING_POS 0
+#define MXC_F_PWRMAN_INTFL_V1_8_WARNING ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_INTFL_V1_8_WARNING_POS))
+#define MXC_F_PWRMAN_INTFL_V3_3_WARNING_POS 1
+#define MXC_F_PWRMAN_INTFL_V3_3_WARNING ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_INTFL_V3_3_WARNING_POS))
+#define MXC_F_PWRMAN_INTFL_RTC_WARNING_POS 2
+#define MXC_F_PWRMAN_INTFL_RTC_WARNING ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_INTFL_RTC_WARNING_POS))
+#define MXC_F_PWRMAN_INTFL_V3_3_RESET_POS 3
+#define MXC_F_PWRMAN_INTFL_V3_3_RESET ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_INTFL_V3_3_RESET_POS))
+#define MXC_F_PWRMAN_INTFL_VDDA_WARNING_POS 4
+#define MXC_F_PWRMAN_INTFL_VDDA_WARNING ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_INTFL_VDDA_WARNING_POS))
+
+#define MXC_F_PWRMAN_INTEN_V1_8_WARNING_POS 0
+#define MXC_F_PWRMAN_INTEN_V1_8_WARNING ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_INTEN_V1_8_WARNING_POS))
+#define MXC_F_PWRMAN_INTEN_V3_3_WARNING_POS 1
+#define MXC_F_PWRMAN_INTEN_V3_3_WARNING ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_INTEN_V3_3_WARNING_POS))
+#define MXC_F_PWRMAN_INTEN_RTC_WARNING_POS 2
+#define MXC_F_PWRMAN_INTEN_RTC_WARNING ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_INTEN_RTC_WARNING_POS))
+#define MXC_F_PWRMAN_INTEN_V3_3_RESET_POS 3
+#define MXC_F_PWRMAN_INTEN_V3_3_RESET ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_INTEN_V3_3_RESET_POS))
+#define MXC_F_PWRMAN_INTEN_VDDA_WARNING_POS 4
+#define MXC_F_PWRMAN_INTEN_VDDA_WARNING ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_INTEN_VDDA_WARNING_POS))
+
+#define MXC_F_PWRMAN_SVM_EVENTS_V1_8_WARNING_POS 0
+#define MXC_F_PWRMAN_SVM_EVENTS_V1_8_WARNING ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_SVM_EVENTS_V1_8_WARNING_POS))
+#define MXC_F_PWRMAN_SVM_EVENTS_V3_3_WARNING_POS 1
+#define MXC_F_PWRMAN_SVM_EVENTS_V3_3_WARNING ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_SVM_EVENTS_V3_3_WARNING_POS))
+#define MXC_F_PWRMAN_SVM_EVENTS_RTC_WARNING_POS 2
+#define MXC_F_PWRMAN_SVM_EVENTS_RTC_WARNING ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_SVM_EVENTS_RTC_WARNING_POS))
+#define MXC_F_PWRMAN_SVM_EVENTS_V3_3_RESET_POS 3
+#define MXC_F_PWRMAN_SVM_EVENTS_V3_3_RESET ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_SVM_EVENTS_V3_3_RESET_POS))
+#define MXC_F_PWRMAN_SVM_EVENTS_VDDA_WARNING_POS 4
+#define MXC_F_PWRMAN_SVM_EVENTS_VDDA_WARNING ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_SVM_EVENTS_VDDA_WARNING_POS))
+
+#define MXC_F_PWRMAN_WUD_CTRL_PAD_SELECT_POS 0
+#define MXC_F_PWRMAN_WUD_CTRL_PAD_SELECT ((uint32_t)(0x0000003FUL << MXC_F_PWRMAN_WUD_CTRL_PAD_SELECT_POS))
+#define MXC_F_PWRMAN_WUD_CTRL_PAD_MODE_POS 8
+#define MXC_F_PWRMAN_WUD_CTRL_PAD_MODE ((uint32_t)(0x00000003UL << MXC_F_PWRMAN_WUD_CTRL_PAD_MODE_POS))
+#define MXC_F_PWRMAN_WUD_CTRL_CLEAR_ALL_POS 12
+#define MXC_F_PWRMAN_WUD_CTRL_CLEAR_ALL ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_CTRL_CLEAR_ALL_POS))
+
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO0_POS 0
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO0 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO0_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO1_POS 1
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO1 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO1_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO2_POS 2
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO2 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO2_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO3_POS 3
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO3 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO3_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO4_POS 4
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO4 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO4_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO5_POS 5
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO5 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO5_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO6_POS 6
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO6 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO6_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO7_POS 7
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO7 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO7_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO8_POS 8
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO8 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO8_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO9_POS 9
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO9 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO9_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO10_POS 10
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO10 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO10_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO11_POS 11
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO11 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO11_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO12_POS 12
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO12 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO12_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO13_POS 13
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO13 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO13_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO14_POS 14
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO14 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO14_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO15_POS 15
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO15 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO15_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO16_POS 16
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO16 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO16_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO17_POS 17
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO17 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO17_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO18_POS 18
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO18 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO18_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO19_POS 19
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO19 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO19_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO20_POS 20
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO20 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO20_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO21_POS 21
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO21 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO21_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO22_POS 22
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO22 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO22_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO23_POS 23
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO23 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO23_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO24_POS 24
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO24 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO24_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO25_POS 25
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO25 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO25_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO26_POS 26
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO26 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO26_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO27_POS 27
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO27 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO27_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO28_POS 28
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO28 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO28_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO29_POS 29
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO29 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO29_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO30_POS 30
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO30 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO30_POS))
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO31_POS 31
+#define MXC_F_PWRMAN_WUD_SEEN0_GPIO31 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN0_GPIO31_POS))
+
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO32_POS 0
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO32 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO32_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO33_POS 1
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO33 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO33_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO34_POS 2
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO34 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO34_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO35_POS 3
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO35 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO35_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO36_POS 4
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO36 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO36_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO37_POS 5
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO37 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO37_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO38_POS 6
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO38 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO38_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO39_POS 7
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO39 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO39_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO40_POS 8
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO40 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO40_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO41_POS 9
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO41 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO41_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO42_POS 10
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO42 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO42_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO43_POS 11
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO43 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO43_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO44_POS 12
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO44 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO44_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO45_POS 13
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO45 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO45_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO46_POS 14
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO46 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO46_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO47_POS 15
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO47 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO47_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO48_POS 16
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO48 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO48_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO49_POS 17
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO49 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO49_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO50_POS 18
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO50 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO50_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO51_POS 19
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO51 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO51_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO52_POS 20
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO52 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO52_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO53_POS 21
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO53 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO53_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO54_POS 22
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO54 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO54_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO55_POS 23
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO55 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO55_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO56_POS 24
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO56 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO56_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO57_POS 25
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO57 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO57_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO58_POS 26
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO58 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO58_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO59_POS 27
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO59 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO59_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO60_POS 28
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO60 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO60_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO61_POS 29
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO61 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO61_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO62_POS 30
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO62 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO62_POS))
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO63_POS 31
+#define MXC_F_PWRMAN_WUD_SEEN1_GPIO63 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_WUD_SEEN1_GPIO63_POS))
+
+#define MXC_F_PWRMAN_BASE_PART_NUM_BASE_PART_NUMBER_POS 0
+#define MXC_F_PWRMAN_BASE_PART_NUM_BASE_PART_NUMBER ((uint32_t)(0x0000FFFFUL << MXC_F_PWRMAN_BASE_PART_NUM_BASE_PART_NUMBER_POS))
+#define MXC_F_PWRMAN_BASE_PART_NUM_PACKAGE_SELECT_POS 28
+#define MXC_F_PWRMAN_BASE_PART_NUM_PACKAGE_SELECT ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_BASE_PART_NUM_PACKAGE_SELECT_POS))
+
+#define MXC_F_PWRMAN_MASK_ID0_REVISION_ID_POS 0
+#define MXC_F_PWRMAN_MASK_ID0_REVISION_ID ((uint32_t)(0x0000000FUL << MXC_F_PWRMAN_MASK_ID0_REVISION_ID_POS))
+#define MXC_F_PWRMAN_MASK_ID0_MASK_ID_POS 4
+#define MXC_F_PWRMAN_MASK_ID0_MASK_ID ((uint32_t)(0x0FFFFFFFUL << MXC_F_PWRMAN_MASK_ID0_MASK_ID_POS))
+
+#define MXC_F_PWRMAN_MASK_ID1_MASK_ID_POS 0
+#define MXC_F_PWRMAN_MASK_ID1_MASK_ID ((uint32_t)(0x7FFFFFFFUL << MXC_F_PWRMAN_MASK_ID1_MASK_ID_POS))
+#define MXC_F_PWRMAN_MASK_ID1_MASK_ID_ENABLE_POS 31
+#define MXC_F_PWRMAN_MASK_ID1_MASK_ID_ENABLE ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_MASK_ID1_MASK_ID_ENABLE_POS))
+
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_UART0_POS 0
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_UART0 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PERIPHERAL_RESET_UART0_POS))
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_UART1_POS 1
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_UART1 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PERIPHERAL_RESET_UART1_POS))
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_TIMER0_POS 2
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_TIMER0 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PERIPHERAL_RESET_TIMER0_POS))
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_TIMER1_POS 3
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_TIMER1 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PERIPHERAL_RESET_TIMER1_POS))
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_TIMER2_POS 4
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_TIMER2 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PERIPHERAL_RESET_TIMER2_POS))
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_TIMER3_POS 5
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_TIMER3 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PERIPHERAL_RESET_TIMER3_POS))
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_WATCHDOG0_POS 6
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_WATCHDOG0 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PERIPHERAL_RESET_WATCHDOG0_POS))
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_USB_POS 7
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_USB ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PERIPHERAL_RESET_USB_POS))
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_ADC_POS 8
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_ADC ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PERIPHERAL_RESET_ADC_POS))
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_DAC0_POS 9
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_DAC0 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PERIPHERAL_RESET_DAC0_POS))
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_DAC1_POS 10
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_DAC1 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PERIPHERAL_RESET_DAC1_POS))
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_DAC2_POS 11
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_DAC2 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PERIPHERAL_RESET_DAC2_POS))
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_DAC3_POS 12
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_DAC3 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PERIPHERAL_RESET_DAC3_POS))
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_DMA_POS 13
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_DMA ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PERIPHERAL_RESET_DMA_POS))
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_LCD_POS 14
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_LCD ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PERIPHERAL_RESET_LCD_POS))
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_GPIO_POS 15
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_GPIO ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PERIPHERAL_RESET_GPIO_POS))
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_PULSE_TRAIN_POS 16
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_PULSE_TRAIN ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PERIPHERAL_RESET_PULSE_TRAIN_POS))
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_SPI0_POS 17
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_SPI0 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PERIPHERAL_RESET_SPI0_POS))
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_SPI1_POS 18
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_SPI1 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PERIPHERAL_RESET_SPI1_POS))
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_SPI2_POS 19
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_SPI2 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PERIPHERAL_RESET_SPI2_POS))
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_I2CM0_POS 20
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_I2CM0 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PERIPHERAL_RESET_I2CM0_POS))
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_I2CM1_POS 21
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_I2CM1 ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PERIPHERAL_RESET_I2CM1_POS))
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_I2CS_POS 22
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_I2CS ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PERIPHERAL_RESET_I2CS_POS))
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_CRC_POS 23
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_CRC ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PERIPHERAL_RESET_CRC_POS))
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_TPU_POS 24
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_TPU ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PERIPHERAL_RESET_TPU_POS))
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_SSB_POS 25
+#define MXC_F_PWRMAN_PERIPHERAL_RESET_SSB ((uint32_t)(0x00000001UL << MXC_F_PWRMAN_PERIPHERAL_RESET_SSB_POS))
+
+#ifdef __cplusplus
+}
+#endif
+
+/**
+* @}
+*/
+
+#endif /* _MXC_PWRMAN_REGS_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/pwrseq_regs.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,299 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef _MXC_PWRSEQ_REGS_H
+#define _MXC_PWRSEQ_REGS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/**
+ * @file pwrseq_regs.h
+ * @addtogroup pwrseq PWRSEQ
+ * @{
+ */
+
+/* Offset Register Description
+ ====== ================================================= */
+typedef struct {
+ __IO uint32_t reg0; /* 0x0000 Power Sequencer Control Register 0 */
+ __IO uint32_t reg1; /* 0x0004 Power Sequencer Control Register 1 */
+ __IO uint32_t reg2; /* 0x0008 Power Sequencer Control Register 2 */
+ __IO uint32_t reg3; /* 0x000C Power Sequencer Control Register 3 */
+ __IO uint32_t reg4; /* 0x0010 Power Sequencer Control Register 4 */
+ __IO uint32_t reg5; /* 0x0014 Power Sequencer Control Register 5 (Trim 0) */
+ __IO uint32_t reg6; /* 0x0018 Power Sequencer Control Register 6 (Trim 1) */
+ __I uint32_t rsv001C; /* 0x001C */
+ __IO uint32_t flags; /* 0x0020 Power Sequencer Flags */
+ __IO uint32_t msk_flags; /* 0x0024 Power Sequencer Flags Mask Register */
+} mxc_pwrseq_regs_t;
+
+
+/*
+ Register offsets for module PWRSEQ.
+*/
+#define MXC_R_PWRSEQ_OFFS_REG0 ((uint32_t)0x00000000UL)
+#define MXC_R_PWRSEQ_OFFS_REG1 ((uint32_t)0x00000004UL)
+#define MXC_R_PWRSEQ_OFFS_REG2 ((uint32_t)0x00000008UL)
+#define MXC_R_PWRSEQ_OFFS_REG3 ((uint32_t)0x0000000CUL)
+#define MXC_R_PWRSEQ_OFFS_REG4 ((uint32_t)0x00000010UL)
+#define MXC_R_PWRSEQ_OFFS_REG5 ((uint32_t)0x00000014UL)
+#define MXC_R_PWRSEQ_OFFS_REG6 ((uint32_t)0x00000018UL)
+#define MXC_R_PWRSEQ_OFFS_FLAGS ((uint32_t)0x00000020UL)
+#define MXC_R_PWRSEQ_OFFS_MSK_FLAGS ((uint32_t)0x00000024UL)
+
+
+/*
+ Field positions and masks for module PWRSEQ.
+*/
+#define MXC_F_PWRSEQ_REG0_PWR_LP1_POS 0
+#define MXC_F_PWRSEQ_REG0_PWR_LP1 ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG0_PWR_LP1_POS))
+#define MXC_F_PWRSEQ_REG0_PWR_FIRST_BOOT_POS 1
+#define MXC_F_PWRSEQ_REG0_PWR_FIRST_BOOT ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG0_PWR_FIRST_BOOT_POS))
+#define MXC_F_PWRSEQ_REG0_PWR_SYS_REBOOT_POS 2
+#define MXC_F_PWRSEQ_REG0_PWR_SYS_REBOOT ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG0_PWR_SYS_REBOOT_POS))
+#define MXC_F_PWRSEQ_REG0_PWR_LDOEN_RUN_POS 3
+#define MXC_F_PWRSEQ_REG0_PWR_LDOEN_RUN ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG0_PWR_LDOEN_RUN_POS))
+#define MXC_F_PWRSEQ_REG0_PWR_LDOEN_SLP_POS 4
+#define MXC_F_PWRSEQ_REG0_PWR_LDOEN_SLP ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG0_PWR_LDOEN_SLP_POS))
+#define MXC_F_PWRSEQ_REG0_PWR_CHZYEN_RUN_POS 5
+#define MXC_F_PWRSEQ_REG0_PWR_CHZYEN_RUN ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG0_PWR_CHZYEN_RUN_POS))
+#define MXC_F_PWRSEQ_REG0_PWR_CHZYEN_SLP_POS 6
+#define MXC_F_PWRSEQ_REG0_PWR_CHZYEN_SLP ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG0_PWR_CHZYEN_SLP_POS))
+#define MXC_F_PWRSEQ_REG0_PWR_ROEN_RUN_POS 7
+#define MXC_F_PWRSEQ_REG0_PWR_ROEN_RUN ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG0_PWR_ROEN_RUN_POS))
+#define MXC_F_PWRSEQ_REG0_PWR_ROEN_SLP_POS 8
+#define MXC_F_PWRSEQ_REG0_PWR_ROEN_SLP ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG0_PWR_ROEN_SLP_POS))
+#define MXC_F_PWRSEQ_REG0_PWR_NREN_RUN_POS 9
+#define MXC_F_PWRSEQ_REG0_PWR_NREN_RUN ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG0_PWR_NREN_RUN_POS))
+#define MXC_F_PWRSEQ_REG0_PWR_NREN_SLP_POS 10
+#define MXC_F_PWRSEQ_REG0_PWR_NREN_SLP ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG0_PWR_NREN_SLP_POS))
+#define MXC_F_PWRSEQ_REG0_PWR_RTCEN_RUN_POS 11
+#define MXC_F_PWRSEQ_REG0_PWR_RTCEN_RUN ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG0_PWR_RTCEN_RUN_POS))
+#define MXC_F_PWRSEQ_REG0_PWR_RTCEN_SLP_POS 12
+#define MXC_F_PWRSEQ_REG0_PWR_RTCEN_SLP ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG0_PWR_RTCEN_SLP_POS))
+#define MXC_F_PWRSEQ_REG0_PWR_SVM3EN_RUN_POS 13
+#define MXC_F_PWRSEQ_REG0_PWR_SVM3EN_RUN ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG0_PWR_SVM3EN_RUN_POS))
+#define MXC_F_PWRSEQ_REG0_PWR_SVM3EN_SLP_POS 14
+#define MXC_F_PWRSEQ_REG0_PWR_SVM3EN_SLP ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG0_PWR_SVM3EN_SLP_POS))
+#define MXC_F_PWRSEQ_REG0_PWR_SVM1EN_RUN_POS 15
+#define MXC_F_PWRSEQ_REG0_PWR_SVM1EN_RUN ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG0_PWR_SVM1EN_RUN_POS))
+#define MXC_F_PWRSEQ_REG0_PWR_SVM1EN_SLP_POS 16
+#define MXC_F_PWRSEQ_REG0_PWR_SVM1EN_SLP ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG0_PWR_SVM1EN_SLP_POS))
+#define MXC_F_PWRSEQ_REG0_PWR_SVMRTCEN_RUN_POS 17
+#define MXC_F_PWRSEQ_REG0_PWR_SVMRTCEN_RUN ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG0_PWR_SVMRTCEN_RUN_POS))
+#define MXC_F_PWRSEQ_REG0_PWR_SVMRTCEN_SLP_POS 18
+#define MXC_F_PWRSEQ_REG0_PWR_SVMRTCEN_SLP ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG0_PWR_SVMRTCEN_SLP_POS))
+#define MXC_F_PWRSEQ_REG0_PWR_SVMVDDA3EN_POS 19
+#define MXC_F_PWRSEQ_REG0_PWR_SVMVDDA3EN ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG0_PWR_SVMVDDA3EN_POS))
+
+#define MXC_F_PWRSEQ_REG1_PWR_TRIKL_CHRG_POS 0
+#define MXC_F_PWRSEQ_REG1_PWR_TRIKL_CHRG ((uint32_t)(0x000000FFUL << MXC_F_PWRSEQ_REG1_PWR_TRIKL_CHRG_POS))
+#define MXC_F_PWRSEQ_REG1_PWR_PD_VDDA3_POS 8
+#define MXC_F_PWRSEQ_REG1_PWR_PD_VDDA3 ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG1_PWR_PD_VDDA3_POS))
+#define MXC_F_PWRSEQ_REG1_PWR_TEMP_SENSOR_PD_POS 9
+#define MXC_F_PWRSEQ_REG1_PWR_TEMP_SENSOR_PD ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG1_PWR_TEMP_SENSOR_PD_POS))
+#define MXC_F_PWRSEQ_REG1_PWR_PD_VDDIO_POS 10
+#define MXC_F_PWRSEQ_REG1_PWR_PD_VDDIO ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG1_PWR_PD_VDDIO_POS))
+#define MXC_F_PWRSEQ_REG1_PWR_MAN_VDDIO_SW_POS 11
+#define MXC_F_PWRSEQ_REG1_PWR_MAN_VDDIO_SW ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG1_PWR_MAN_VDDIO_SW_POS))
+#define MXC_F_PWRSEQ_REG1_PWR_MAN_VDDIO_SW2_POS 12
+#define MXC_F_PWRSEQ_REG1_PWR_MAN_VDDIO_SW2 ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG1_PWR_MAN_VDDIO_SW2_POS))
+#define MXC_F_PWRSEQ_REG1_PWR_MAN_VDDIO_SW1_POS 13
+#define MXC_F_PWRSEQ_REG1_PWR_MAN_VDDIO_SW1 ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG1_PWR_MAN_VDDIO_SW1_POS))
+#define MXC_F_PWRSEQ_REG1_PWR_GPIO_FREEZE_POS 14
+#define MXC_F_PWRSEQ_REG1_PWR_GPIO_FREEZE ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG1_PWR_GPIO_FREEZE_POS))
+
+#define MXC_F_PWRSEQ_REG2_PWR_RST3_POS 0
+#define MXC_F_PWRSEQ_REG2_PWR_RST3 ((uint32_t)(0x0000001FUL << MXC_F_PWRSEQ_REG2_PWR_RST3_POS))
+#define MXC_F_PWRSEQ_REG2_PWR_W3_POS 5
+#define MXC_F_PWRSEQ_REG2_PWR_W3 ((uint32_t)(0x0000001FUL << MXC_F_PWRSEQ_REG2_PWR_W3_POS))
+#define MXC_F_PWRSEQ_REG2_PWR_W1_POS 10
+#define MXC_F_PWRSEQ_REG2_PWR_W1 ((uint32_t)(0x0000001FUL << MXC_F_PWRSEQ_REG2_PWR_W1_POS))
+#define MXC_F_PWRSEQ_REG2_PWR_W1_LOW_POS 15
+#define MXC_F_PWRSEQ_REG2_PWR_W1_LOW ((uint32_t)(0x0000001FUL << MXC_F_PWRSEQ_REG2_PWR_W1_LOW_POS))
+#define MXC_F_PWRSEQ_REG2_PWR_WRTC_POS 20
+#define MXC_F_PWRSEQ_REG2_PWR_WRTC ((uint32_t)(0x0000001FUL << MXC_F_PWRSEQ_REG2_PWR_WRTC_POS))
+#define MXC_F_PWRSEQ_REG2_PWR_WVDDA3_POS 25
+#define MXC_F_PWRSEQ_REG2_PWR_WVDDA3 ((uint32_t)(0x0000003FUL << MXC_F_PWRSEQ_REG2_PWR_WVDDA3_POS))
+
+#define MXC_F_PWRSEQ_REG3_PWR_ROSEL_POS 0
+#define MXC_F_PWRSEQ_REG3_PWR_ROSEL ((uint32_t)(0x00000007UL << MXC_F_PWRSEQ_REG3_PWR_ROSEL_POS))
+#define MXC_F_PWRSEQ_REG3_PWR_ROSEL_QUICK_POS 3
+#define MXC_F_PWRSEQ_REG3_PWR_ROSEL_QUICK ((uint32_t)(0x00000003UL << MXC_F_PWRSEQ_REG3_PWR_ROSEL_QUICK_POS))
+#define MXC_F_PWRSEQ_REG3_PWR_SVMSEL_POS 5
+#define MXC_F_PWRSEQ_REG3_PWR_SVMSEL ((uint32_t)(0x00000007UL << MXC_F_PWRSEQ_REG3_PWR_SVMSEL_POS))
+#define MXC_F_PWRSEQ_REG3_PWR_PWRFLTRSVMSELO_POS 8
+#define MXC_F_PWRSEQ_REG3_PWR_PWRFLTRSVMSELO ((uint32_t)(0x00000003UL << MXC_F_PWRSEQ_REG3_PWR_PWRFLTRSVMSELO_POS))
+#define MXC_F_PWRSEQ_REG3_PWR_PWRFLTRROSEL_POS 10
+#define MXC_F_PWRSEQ_REG3_PWR_PWRFLTRROSEL ((uint32_t)(0x00000007UL << MXC_F_PWRSEQ_REG3_PWR_PWRFLTRROSEL_POS))
+#define MXC_F_PWRSEQ_REG3_PWR_SVM_CLK_MUX_POS 13
+#define MXC_F_PWRSEQ_REG3_PWR_SVM_CLK_MUX ((uint32_t)(0x00000003UL << MXC_F_PWRSEQ_REG3_PWR_SVM_CLK_MUX_POS))
+#define MXC_F_PWRSEQ_REG3_PWR_RO_CLK_MUX_POS 15
+#define MXC_F_PWRSEQ_REG3_PWR_RO_CLK_MUX ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG3_PWR_RO_CLK_MUX_POS))
+#define MXC_F_PWRSEQ_REG3_PWR_QUICK_CNT_POS 16
+#define MXC_F_PWRSEQ_REG3_PWR_QUICK_CNT ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG3_PWR_QUICK_CNT_POS))
+#define MXC_F_PWRSEQ_REG3_PWR_BO_TC_POS 17
+#define MXC_F_PWRSEQ_REG3_PWR_BO_TC ((uint32_t)(0x00000003UL << MXC_F_PWRSEQ_REG3_PWR_BO_TC_POS))
+
+#define MXC_F_PWRSEQ_REG4_PWR_TM_PS_2_GPIO_POS 0
+#define MXC_F_PWRSEQ_REG4_PWR_TM_PS_2_GPIO ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG4_PWR_TM_PS_2_GPIO_POS))
+#define MXC_F_PWRSEQ_REG4_PWR_TM_FAST_TIMERS_POS 1
+#define MXC_F_PWRSEQ_REG4_PWR_TM_FAST_TIMERS ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG4_PWR_TM_FAST_TIMERS_POS))
+#define MXC_F_PWRSEQ_REG4_PWR_USB_PROT_TRIM_POS 2
+#define MXC_F_PWRSEQ_REG4_PWR_USB_PROT_TRIM ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG4_PWR_USB_PROT_TRIM_POS))
+#define MXC_F_PWRSEQ_REG4_PWR_USB_DIS_COMP_POS 3
+#define MXC_F_PWRSEQ_REG4_PWR_USB_DIS_COMP ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG4_PWR_USB_DIS_COMP_POS))
+#define MXC_F_PWRSEQ_REG4_PWR_USB_TO_VDD_FAST_POS 4
+#define MXC_F_PWRSEQ_REG4_PWR_USB_TO_VDD_FAST ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG4_PWR_USB_TO_VDD_FAST_POS))
+#define MXC_F_PWRSEQ_REG4_PWR_USB_LDO_OFF_POS 5
+#define MXC_F_PWRSEQ_REG4_PWR_USB_LDO_OFF ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG4_PWR_USB_LDO_OFF_POS))
+#define MXC_F_PWRSEQ_REG4_PWR_USB_FRC_VDD_POS 6
+#define MXC_F_PWRSEQ_REG4_PWR_USB_FRC_VDD ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_REG4_PWR_USB_FRC_VDD_POS))
+
+#define MXC_F_PWRSEQ_REG5_PWR_TRIM_SVM_BG_POS 0
+#define MXC_F_PWRSEQ_REG5_PWR_TRIM_SVM_BG ((uint32_t)(0x0000003FUL << MXC_F_PWRSEQ_REG5_PWR_TRIM_SVM_BG_POS))
+#define MXC_F_PWRSEQ_REG5_PWR_TRIM_REG1P8_POS 6
+#define MXC_F_PWRSEQ_REG5_PWR_TRIM_REG1P8 ((uint32_t)(0x0000000FUL << MXC_F_PWRSEQ_REG5_PWR_TRIM_REG1P8_POS))
+#define MXC_F_PWRSEQ_REG5_PWR_TRIM_REG3P3_POS 10
+#define MXC_F_PWRSEQ_REG5_PWR_TRIM_REG3P3 ((uint32_t)(0x0000001FUL << MXC_F_PWRSEQ_REG5_PWR_TRIM_REG3P3_POS))
+#define MXC_F_PWRSEQ_REG5_PWR_TRIM_OSC_VREF_POS 15
+#define MXC_F_PWRSEQ_REG5_PWR_TRIM_OSC_VREF ((uint32_t)(0x0000007FUL << MXC_F_PWRSEQ_REG5_PWR_TRIM_OSC_VREF_POS))
+
+#define MXC_F_PWRSEQ_REG6_PWR_TRIM_USB_BIAS_POS 0
+#define MXC_F_PWRSEQ_REG6_PWR_TRIM_USB_BIAS ((uint32_t)(0x00000007UL << MXC_F_PWRSEQ_REG6_PWR_TRIM_USB_BIAS_POS))
+#define MXC_F_PWRSEQ_REG6_PWR_TRIM_USB_PM_RES_POS 3
+#define MXC_F_PWRSEQ_REG6_PWR_TRIM_USB_PM_RES ((uint32_t)(0x0000000FUL << MXC_F_PWRSEQ_REG6_PWR_TRIM_USB_PM_RES_POS))
+#define MXC_F_PWRSEQ_REG6_PWR_TRIM_USB_DM_RES_POS 7
+#define MXC_F_PWRSEQ_REG6_PWR_TRIM_USB_DM_RES ((uint32_t)(0x0000000FUL << MXC_F_PWRSEQ_REG6_PWR_TRIM_USB_DM_RES_POS))
+
+#define MXC_F_PWRSEQ_FLAGS_PWR_FIRST_BOOT_POS 0
+#define MXC_F_PWRSEQ_FLAGS_PWR_FIRST_BOOT ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_FLAGS_PWR_FIRST_BOOT_POS))
+#define MXC_F_PWRSEQ_FLAGS_PWR_SYS_REBOOT_POS 1
+#define MXC_F_PWRSEQ_FLAGS_PWR_SYS_REBOOT ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_FLAGS_PWR_SYS_REBOOT_POS))
+#define MXC_F_PWRSEQ_FLAGS_PWR_PRV_PWR_FAIL_POS 2
+#define MXC_F_PWRSEQ_FLAGS_PWR_PRV_PWR_FAIL ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_FLAGS_PWR_PRV_PWR_FAIL_POS))
+#define MXC_F_PWRSEQ_FLAGS_PWR_PRV_BOOT_FAIL_POS 3
+#define MXC_F_PWRSEQ_FLAGS_PWR_PRV_BOOT_FAIL ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_FLAGS_PWR_PRV_BOOT_FAIL_POS))
+#define MXC_F_PWRSEQ_FLAGS_PWR_COMP_WAKEUP_POS 4
+#define MXC_F_PWRSEQ_FLAGS_PWR_COMP_WAKEUP ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_FLAGS_PWR_COMP_WAKEUP_POS))
+#define MXC_F_PWRSEQ_FLAGS_PWR_IO_WAKEUP_POS 5
+#define MXC_F_PWRSEQ_FLAGS_PWR_IO_WAKEUP ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_FLAGS_PWR_IO_WAKEUP_POS))
+#define MXC_F_PWRSEQ_FLAGS_PWR_VDD3_RST_POS 6
+#define MXC_F_PWRSEQ_FLAGS_PWR_VDD3_RST ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_FLAGS_PWR_VDD3_RST_POS))
+#define MXC_F_PWRSEQ_FLAGS_PWR_VDD3_WARN_POS 7
+#define MXC_F_PWRSEQ_FLAGS_PWR_VDD3_WARN ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_FLAGS_PWR_VDD3_WARN_POS))
+#define MXC_F_PWRSEQ_FLAGS_PWR_VDD1_RST_POS 8
+#define MXC_F_PWRSEQ_FLAGS_PWR_VDD1_RST ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_FLAGS_PWR_VDD1_RST_POS))
+#define MXC_F_PWRSEQ_FLAGS_PWR_VDD1_LOW_RST_POS 9
+#define MXC_F_PWRSEQ_FLAGS_PWR_VDD1_LOW_RST ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_FLAGS_PWR_VDD1_LOW_RST_POS))
+#define MXC_F_PWRSEQ_FLAGS_PWR_VDD1_WARN_POS 10
+#define MXC_F_PWRSEQ_FLAGS_PWR_VDD1_WARN ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_FLAGS_PWR_VDD1_WARN_POS))
+#define MXC_F_PWRSEQ_FLAGS_PWR_VRTC_WARN_POS 11
+#define MXC_F_PWRSEQ_FLAGS_PWR_VRTC_WARN ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_FLAGS_PWR_VRTC_WARN_POS))
+#define MXC_F_PWRSEQ_FLAGS_PWR_POR3Z_FAIL_POS 12
+#define MXC_F_PWRSEQ_FLAGS_PWR_POR3Z_FAIL ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_FLAGS_PWR_POR3Z_FAIL_POS))
+#define MXC_F_PWRSEQ_FLAGS_RTC_CMPR0_POS 13
+#define MXC_F_PWRSEQ_FLAGS_RTC_CMPR0 ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_FLAGS_RTC_CMPR0_POS))
+#define MXC_F_PWRSEQ_FLAGS_RTC_CMPR1_POS 14
+#define MXC_F_PWRSEQ_FLAGS_RTC_CMPR1 ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_FLAGS_RTC_CMPR1_POS))
+#define MXC_F_PWRSEQ_FLAGS_RTC_PRESCALE_CMP_POS 15
+#define MXC_F_PWRSEQ_FLAGS_RTC_PRESCALE_CMP ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_FLAGS_RTC_PRESCALE_CMP_POS))
+#define MXC_F_PWRSEQ_FLAGS_RTC_ROLLOVER_POS 16
+#define MXC_F_PWRSEQ_FLAGS_RTC_ROLLOVER ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_FLAGS_RTC_ROLLOVER_POS))
+#define MXC_F_PWRSEQ_FLAGS_PWR_BROWNOUT_DET_POS 17
+#define MXC_F_PWRSEQ_FLAGS_PWR_BROWNOUT_DET ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_FLAGS_PWR_BROWNOUT_DET_POS))
+#define MXC_F_PWRSEQ_FLAGS_PWR_USB_PLUG_WAKEUP_POS 18
+#define MXC_F_PWRSEQ_FLAGS_PWR_USB_PLUG_WAKEUP ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_FLAGS_PWR_USB_PLUG_WAKEUP_POS))
+#define MXC_F_PWRSEQ_FLAGS_PWR_USB_REMOVE_WAKEUP_POS 19
+#define MXC_F_PWRSEQ_FLAGS_PWR_USB_REMOVE_WAKEUP ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_FLAGS_PWR_USB_REMOVE_WAKEUP_POS))
+#define MXC_F_PWRSEQ_FLAGS_PWR_VDD22_RST_POS 20
+#define MXC_F_PWRSEQ_FLAGS_PWR_VDD22_RST ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_FLAGS_PWR_VDD22_RST_POS))
+#define MXC_F_PWRSEQ_FLAGS_PWR_VDD195_RST_POS 21
+#define MXC_F_PWRSEQ_FLAGS_PWR_VDD195_RST ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_FLAGS_PWR_VDD195_RST_POS))
+
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_SYS_REBOOT_POS 1
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_SYS_REBOOT ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_MSK_FLAGS_PWR_SYS_REBOOT_POS))
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_PRV_PWR_FAIL_POS 2
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_PRV_PWR_FAIL ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_MSK_FLAGS_PWR_PRV_PWR_FAIL_POS))
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_PRV_BOOT_FAIL_POS 3
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_PRV_BOOT_FAIL ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_MSK_FLAGS_PWR_PRV_BOOT_FAIL_POS))
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_COMP_WAKEUP_POS 4
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_COMP_WAKEUP ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_MSK_FLAGS_PWR_COMP_WAKEUP_POS))
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_IO_WAKEUP_POS 5
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_IO_WAKEUP ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_MSK_FLAGS_PWR_IO_WAKEUP_POS))
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_VDD3_RST_POS 6
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_VDD3_RST ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_MSK_FLAGS_PWR_VDD3_RST_POS))
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_VDD3_WARN_POS 7
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_VDD3_WARN ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_MSK_FLAGS_PWR_VDD3_WARN_POS))
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_VDD1_RST_POS 8
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_VDD1_RST ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_MSK_FLAGS_PWR_VDD1_RST_POS))
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_VDD1_LOW_RST_POS 9
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_VDD1_LOW_RST ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_MSK_FLAGS_PWR_VDD1_LOW_RST_POS))
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_VDD1_WARN_POS 10
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_VDD1_WARN ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_MSK_FLAGS_PWR_VDD1_WARN_POS))
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_VRTC_WARN_POS 11
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_VRTC_WARN ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_MSK_FLAGS_PWR_VRTC_WARN_POS))
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_POR3Z_FAIL_POS 12
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_POR3Z_FAIL ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_MSK_FLAGS_PWR_POR3Z_FAIL_POS))
+#define MXC_F_PWRSEQ_MSK_FLAGS_RTC_CMPR0_POS 13
+#define MXC_F_PWRSEQ_MSK_FLAGS_RTC_CMPR0 ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_MSK_FLAGS_RTC_CMPR0_POS))
+#define MXC_F_PWRSEQ_MSK_FLAGS_RTC_CMPR1_POS 14
+#define MXC_F_PWRSEQ_MSK_FLAGS_RTC_CMPR1 ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_MSK_FLAGS_RTC_CMPR1_POS))
+#define MXC_F_PWRSEQ_MSK_FLAGS_RTC_PRESCALE_CMP_POS 15
+#define MXC_F_PWRSEQ_MSK_FLAGS_RTC_PRESCALE_CMP ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_MSK_FLAGS_RTC_PRESCALE_CMP_POS))
+#define MXC_F_PWRSEQ_MSK_FLAGS_RTC_ROLLOVER_POS 16
+#define MXC_F_PWRSEQ_MSK_FLAGS_RTC_ROLLOVER ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_MSK_FLAGS_RTC_ROLLOVER_POS))
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_BROWNOUT_DET_POS 17
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_BROWNOUT_DET ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_MSK_FLAGS_PWR_BROWNOUT_DET_POS))
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_USB_PLUG_WAKEUP_POS 18
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_USB_PLUG_WAKEUP ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_MSK_FLAGS_PWR_USB_PLUG_WAKEUP_POS))
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_USB_REMOVE_WAKEUP_POS 19
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_USB_REMOVE_WAKEUP ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_MSK_FLAGS_PWR_USB_REMOVE_WAKEUP_POS))
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_VDD22_RST_POS 20
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_VDD22_RST ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_MSK_FLAGS_PWR_VDD22_RST_POS))
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_VDD195_RST_POS 21
+#define MXC_F_PWRSEQ_MSK_FLAGS_PWR_VDD195_RST ((uint32_t)(0x00000001UL << MXC_F_PWRSEQ_MSK_FLAGS_PWR_VDD195_RST_POS))
+
+#ifdef __cplusplus
+}
+#endif
+
+/**
+* @}
+*/
+
+#endif /* _MXC_PWRSEQ_REGS_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/rtc_regs.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,246 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef _MXC_RTC_REGS_H
+#define _MXC_RTC_REGS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/**
+ * @file rtc_regs.h
+ * @addtogroup rtc RTCTMR
+ * @{
+ */
+
+/**
+ * @brief Defines clock divider for 4096Hz input clock.
+ */
+typedef enum {
+ /** (4kHz) divide input clock by 2^0 = 1 */
+ MXC_E_RTC_PRESCALE_DIV_2_0 = 0,
+ /** (2kHz) divide input clock by 2^1 = 2 */
+ MXC_E_RTC_PRESCALE_DIV_2_1,
+ /** (1kHz) divide input clock by 2^2 = 4 */
+ MXC_E_RTC_PRESCALE_DIV_2_2,
+ /** (512Hz) divide input clock by 2^3 = 8 */
+ MXC_E_RTC_PRESCALE_DIV_2_3,
+ /** (256Hz) divide input clock by 2^4 = 16 */
+ MXC_E_RTC_PRESCALE_DIV_2_4,
+ /** (128Hz) divide input clock by 2^5 = 32 */
+ MXC_E_RTC_PRESCALE_DIV_2_5,
+ /** (64Hz) divide input clock by 2^6 = 64 */
+ MXC_E_RTC_PRESCALE_DIV_2_6,
+ /** (32Hz) divide input clock by 2^7 = 128 */
+ MXC_E_RTC_PRESCALE_DIV_2_7,
+ /** (16Hz) divide input clock by 2^8 = 256 */
+ MXC_E_RTC_PRESCALE_DIV_2_8,
+ /** (8Hz) divide input clock by 2^9 = 512 */
+ MXC_E_RTC_PRESCALE_DIV_2_9,
+ /** (4Hz) divide input clock by 2^10 = 1024 */
+ MXC_E_RTC_PRESCALE_DIV_2_10,
+ /** (2Hz) divide input clock by 2^11 = 2048 */
+ MXC_E_RTC_PRESCALE_DIV_2_11,
+ /** (1Hz) divide input clock by 2^12 = 4096 */
+ MXC_E_RTC_PRESCALE_DIV_2_12,
+} mxc_rtc_prescale_t;
+
+/* Offset Register Description
+ ====== ========================================= */
+typedef struct {
+ __IO uint32_t ctrl; /* 0x0000 RTC Timer Control */
+ __IO uint32_t timer; /* 0x0004 RTC Timer Count Value */
+ __IO uint32_t comp[2]; /* 0x0008 RTC Alarm (0..1) Compare Registers */
+ __IO uint32_t flags; /* 0x0010 CPU Interrupt and RTC Domain Flags */
+ __I uint32_t rsv0014; /* 0x0014 */
+ __IO uint32_t inten; /* 0x0018 Interrupt Enable Controls */
+ __IO uint32_t prescale; /* 0x001C RTC Timer Prescale Setting */
+ __I uint32_t rsv0020; /* 0x0020 */
+ __IO uint32_t prescale_mask; /* 0x0024 RTC Timer Prescale Compare Mask */
+ __IO uint32_t trim_ctrl; /* 0x0028 RTC Timer Trim Controls */
+ __IO uint32_t trim_value; /* 0x002C RTC Timer Trim Adjustment Interval */
+} mxc_rtctmr_regs_t;
+
+/*
+ Register offsets for module RTCTMR.
+*/
+#define MXC_R_RTCTMR_OFFS_CTRL ((uint32_t)0x00000000UL)
+#define MXC_R_RTCTMR_OFFS_TIMER ((uint32_t)0x00000004UL)
+#define MXC_R_RTCTMR_OFFS_COMP_0 ((uint32_t)0x00000008UL)
+#define MXC_R_RTCTMR_OFFS_COMP_1 ((uint32_t)0x0000000CUL)
+#define MXC_R_RTCTMR_OFFS_FLAGS ((uint32_t)0x00000010UL)
+#define MXC_R_RTCTMR_OFFS_INTEN ((uint32_t)0x00000018UL)
+#define MXC_R_RTCTMR_OFFS_PRESCALE ((uint32_t)0x0000001CUL)
+#define MXC_R_RTCTMR_OFFS_PRESCALE_MASK ((uint32_t)0x00000024UL)
+#define MXC_R_RTCTMR_OFFS_TRIM_CTRL ((uint32_t)0x00000028UL)
+#define MXC_R_RTCTMR_OFFS_TRIM_VALUE ((uint32_t)0x0000002CUL)
+
+/*
+ Field positions and masks for module RTCTMR.
+*/
+#define MXC_F_RTC_CTRL_ENABLE_POS 0
+#define MXC_F_RTC_CTRL_ENABLE ((uint32_t)(0x00000001UL << MXC_F_RTC_CTRL_ENABLE_POS))
+#define MXC_F_RTC_CTRL_CLEAR_POS 1
+#define MXC_F_RTC_CTRL_CLEAR ((uint32_t)(0x00000001UL << MXC_F_RTC_CTRL_CLEAR_POS))
+#define MXC_F_RTC_CTRL_PENDING_POS 2
+#define MXC_F_RTC_CTRL_PENDING ((uint32_t)(0x00000001UL << MXC_F_RTC_CTRL_PENDING_POS))
+#define MXC_F_RTC_CTRL_USE_ASYNC_FLAGS_POS 3
+#define MXC_F_RTC_CTRL_USE_ASYNC_FLAGS ((uint32_t)(0x00000001UL << MXC_F_RTC_CTRL_USE_ASYNC_FLAGS_POS))
+#define MXC_F_RTC_CTRL_AGGRESSIVE_RST_POS 4
+#define MXC_F_RTC_CTRL_AGGRESSIVE_RST ((uint32_t)(0x00000001UL << MXC_F_RTC_CTRL_AGGRESSIVE_RST_POS))
+#define MXC_F_RTC_CTRL_EN_ACTIVE_POS 16
+#define MXC_F_RTC_CTRL_EN_ACTIVE ((uint32_t)(0x00000001UL << MXC_F_RTC_CTRL_EN_ACTIVE_POS))
+#define MXC_F_RTC_CTRL_OSC_GOTO_LOW_ACTIVE_POS 17
+#define MXC_F_RTC_CTRL_OSC_GOTO_LOW_ACTIVE ((uint32_t)(0x00000001UL << MXC_F_RTC_CTRL_OSC_GOTO_LOW_ACTIVE_POS))
+#define MXC_F_RTC_CTRL_OSC_FRCE_SM_EN_ACTIVE_POS 18
+#define MXC_F_RTC_CTRL_OSC_FRCE_SM_EN_ACTIVE ((uint32_t)(0x00000001UL << MXC_F_RTC_CTRL_OSC_FRCE_SM_EN_ACTIVE_POS))
+#define MXC_F_RTC_CTRL_OSC_FRCE_ST_ACTIVE_POS 19
+#define MXC_F_RTC_CTRL_OSC_FRCE_ST_ACTIVE ((uint32_t)(0x00000001UL << MXC_F_RTC_CTRL_OSC_FRCE_ST_ACTIVE_POS))
+#define MXC_F_RTC_CTRL_SET_ACTIVE_POS 20
+#define MXC_F_RTC_CTRL_SET_ACTIVE ((uint32_t)(0x00000001UL << MXC_F_RTC_CTRL_SET_ACTIVE_POS))
+#define MXC_F_RTC_CTRL_CLR_ACTIVE_POS 21
+#define MXC_F_RTC_CTRL_CLR_ACTIVE ((uint32_t)(0x00000001UL << MXC_F_RTC_CTRL_CLR_ACTIVE_POS))
+#define MXC_F_RTC_CTRL_ROLLOVER_CLR_ACTIVE_POS 22
+#define MXC_F_RTC_CTRL_ROLLOVER_CLR_ACTIVE ((uint32_t)(0x00000001UL << MXC_F_RTC_CTRL_ROLLOVER_CLR_ACTIVE_POS))
+#define MXC_F_RTC_CTRL_PRESCALE_CMPR0_ACTIVE_POS 23
+#define MXC_F_RTC_CTRL_PRESCALE_CMPR0_ACTIVE ((uint32_t)(0x00000001UL << MXC_F_RTC_CTRL_PRESCALE_CMPR0_ACTIVE_POS))
+#define MXC_F_RTC_CTRL_PRESCALE_UPDATE_ACTIVE_POS 24
+#define MXC_F_RTC_CTRL_PRESCALE_UPDATE_ACTIVE ((uint32_t)(0x00000001UL << MXC_F_RTC_CTRL_PRESCALE_UPDATE_ACTIVE_POS))
+#define MXC_F_RTC_CTRL_CMPR1_CLR_ACTIVE_POS 25
+#define MXC_F_RTC_CTRL_CMPR1_CLR_ACTIVE ((uint32_t)(0x00000001UL << MXC_F_RTC_CTRL_CMPR1_CLR_ACTIVE_POS))
+#define MXC_F_RTC_CTRL_CMPR0_CLR_ACTIVE_POS 26
+#define MXC_F_RTC_CTRL_CMPR0_CLR_ACTIVE ((uint32_t)(0x00000001UL << MXC_F_RTC_CTRL_CMPR0_CLR_ACTIVE_POS))
+
+#define MXC_F_RTC_FLAGS_COMP0_POS 0
+#define MXC_F_RTC_FLAGS_COMP0 ((uint32_t)(0x00000001UL << MXC_F_RTC_FLAGS_COMP0_POS))
+#define MXC_F_RTC_FLAGS_COMP1_POS 1
+#define MXC_F_RTC_FLAGS_COMP1 ((uint32_t)(0x00000001UL << MXC_F_RTC_FLAGS_COMP1_POS))
+#define MXC_F_RTC_FLAGS_PRESCALE_COMP_POS 2
+#define MXC_F_RTC_FLAGS_PRESCALE_COMP ((uint32_t)(0x00000001UL << MXC_F_RTC_FLAGS_PRESCALE_COMP_POS))
+#define MXC_F_RTC_FLAGS_OVERFLOW_POS 3
+#define MXC_F_RTC_FLAGS_OVERFLOW ((uint32_t)(0x00000001UL << MXC_F_RTC_FLAGS_OVERFLOW_POS))
+#define MXC_F_RTC_FLAGS_TRIM_POS 4
+#define MXC_F_RTC_FLAGS_TRIM ((uint32_t)(0x00000001UL << MXC_F_RTC_FLAGS_TRIM_POS))
+#define MXC_F_RTC_FLAGS_COMP0_FLAG_A_POS 8
+#define MXC_F_RTC_FLAGS_COMP0_FLAG_A ((uint32_t)(0x00000001UL << MXC_F_RTC_FLAGS_COMP0_FLAG_A_POS))
+#define MXC_F_RTC_FLAGS_COMP1_FLAG_A_POS 9
+#define MXC_F_RTC_FLAGS_COMP1_FLAG_A ((uint32_t)(0x00000001UL << MXC_F_RTC_FLAGS_COMP1_FLAG_A_POS))
+#define MXC_F_RTC_FLAGS_PRESCL_FLAG_A_POS 10
+#define MXC_F_RTC_FLAGS_PRESCL_FLAG_A ((uint32_t)(0x00000001UL << MXC_F_RTC_FLAGS_PRESCL_FLAG_A_POS))
+#define MXC_F_RTC_FLAGS_OVERFLOW_FLAG_A_POS 11
+#define MXC_F_RTC_FLAGS_OVERFLOW_FLAG_A ((uint32_t)(0x00000001UL << MXC_F_RTC_FLAGS_OVERFLOW_FLAG_A_POS))
+#define MXC_F_RTC_FLAGS_TRIM_FLAG_A_POS 12
+#define MXC_F_RTC_FLAGS_TRIM_FLAG_A ((uint32_t)(0x00000001UL << MXC_F_RTC_FLAGS_TRIM_FLAG_A_POS))
+#define MXC_F_RTC_FLAGS_ASYNC_CLR_FLAGS_POS 31
+#define MXC_F_RTC_FLAGS_ASYNC_CLR_FLAGS ((uint32_t)(0x00000001UL << MXC_F_RTC_FLAGS_ASYNC_CLR_FLAGS_POS))
+
+#define MXC_F_RTC_INTEN_COMP0_POS 0
+#define MXC_F_RTC_INTEN_COMP0 ((uint32_t)(0x00000001UL << MXC_F_RTC_INTEN_COMP0_POS))
+#define MXC_F_RTC_INTEN_COMP1_POS 1
+#define MXC_F_RTC_INTEN_COMP1 ((uint32_t)(0x00000001UL << MXC_F_RTC_INTEN_COMP1_POS))
+#define MXC_F_RTC_INTEN_PRESCALE_COMP_POS 2
+#define MXC_F_RTC_INTEN_PRESCALE_COMP ((uint32_t)(0x00000001UL << MXC_F_RTC_INTEN_PRESCALE_COMP_POS))
+#define MXC_F_RTC_INTEN_OVERFLOW_POS 3
+#define MXC_F_RTC_INTEN_OVERFLOW ((uint32_t)(0x00000001UL << MXC_F_RTC_INTEN_OVERFLOW_POS))
+#define MXC_F_RTC_INTEN_TRIM_POS 4
+#define MXC_F_RTC_INTEN_TRIM ((uint32_t)(0x00000001UL << MXC_F_RTC_INTEN_TRIM_POS))
+
+#define MXC_F_RTC_PRESCALE_WIDTH_SELECTION_POS 0
+#define MXC_F_RTC_PRESCALE_WIDTH_SELECTION ((uint32_t)(0x0000000FUL << MXC_F_RTC_PRESCALE_WIDTH_SELECTION_POS))
+
+#define MXC_F_RTC_PRESCALE_MASK_COMP_MASK_POS 0
+#define MXC_F_RTC_PRESCALE_MASK_COMP_MASK ((uint32_t)(0x0000000FUL << MXC_F_RTC_PRESCALE_MASK_COMP_MASK_POS))
+
+#define MXC_F_RTC_TRIM_CTRL_TRIM_ENABLE_R_POS 0
+#define MXC_F_RTC_TRIM_CTRL_TRIM_ENABLE_R ((uint32_t)(0x00000001UL << MXC_F_RTC_TRIM_CTRL_TRIM_ENABLE_R_POS))
+#define MXC_F_RTC_TRIM_CTRL_TRIM_FASTER_OVR_R_POS 1
+#define MXC_F_RTC_TRIM_CTRL_TRIM_FASTER_OVR_R ((uint32_t)(0x00000001UL << MXC_F_RTC_TRIM_CTRL_TRIM_FASTER_OVR_R_POS))
+#define MXC_F_RTC_TRIM_CTRL_TRIM_SLOWER_R_POS 2
+#define MXC_F_RTC_TRIM_CTRL_TRIM_SLOWER_R ((uint32_t)(0x00000001UL << MXC_F_RTC_TRIM_CTRL_TRIM_SLOWER_R_POS))
+
+#define MXC_F_RTC_TRIM_VALUE_TRIM_VALUE_POS 0
+#define MXC_F_RTC_TRIM_VALUE_TRIM_VALUE ((uint32_t)(0x0003FFFFUL << MXC_F_RTC_TRIM_VALUE_TRIM_VALUE_POS))
+#define MXC_F_RTC_TRIM_VALUE_TRIM_CONTROL_POS 18
+#define MXC_F_RTC_TRIM_VALUE_TRIM_CONTROL ((uint32_t)(0x00000001UL << MXC_F_RTC_TRIM_VALUE_TRIM_CONTROL_POS))
+
+#define MXC_F_RTC_NANO_CNTR_NANORING_COUNTER_POS 0
+#define MXC_F_RTC_NANO_CNTR_NANORING_COUNTER ((uint32_t)(0x0000FFFFUL << MXC_F_RTC_NANO_CNTR_NANORING_COUNTER_POS))
+
+#define MXC_F_RTC_CLK_CTRL_OSC1_EN_POS 0
+#define MXC_F_RTC_CLK_CTRL_OSC1_EN ((uint32_t)(0x00000001UL << MXC_F_RTC_CLK_CTRL_OSC1_EN_POS))
+#define MXC_F_RTC_CLK_CTRL_OSC2_EN_POS 1
+#define MXC_F_RTC_CLK_CTRL_OSC2_EN ((uint32_t)(0x00000001UL << MXC_F_RTC_CLK_CTRL_OSC2_EN_POS))
+#define MXC_F_RTC_CLK_CTRL_NANO_EN_POS 2
+#define MXC_F_RTC_CLK_CTRL_NANO_EN ((uint32_t)(0x00000001UL << MXC_F_RTC_CLK_CTRL_NANO_EN_POS))
+
+#define MXC_F_RTC_DSEN_CTRL_DSEN_DISABLE_POS 0
+#define MXC_F_RTC_DSEN_CTRL_DSEN_DISABLE ((uint32_t)(0x00000001UL << MXC_F_RTC_DSEN_CTRL_DSEN_DISABLE_POS))
+
+#define MXC_F_RTC_OSC_CTRL_OSC_BYPASS_POS 0
+#define MXC_F_RTC_OSC_CTRL_OSC_BYPASS ((uint32_t)(0x00000001UL << MXC_F_RTC_OSC_CTRL_OSC_BYPASS_POS))
+#define MXC_F_RTC_OSC_CTRL_OSC_DISABLE_R_POS 1
+#define MXC_F_RTC_OSC_CTRL_OSC_DISABLE_R ((uint32_t)(0x00000001UL << MXC_F_RTC_OSC_CTRL_OSC_DISABLE_R_POS))
+#define MXC_F_RTC_OSC_CTRL_OSC_DISABLE_SEL_POS 2
+#define MXC_F_RTC_OSC_CTRL_OSC_DISABLE_SEL ((uint32_t)(0x00000001UL << MXC_F_RTC_OSC_CTRL_OSC_DISABLE_SEL_POS))
+#define MXC_F_RTC_OSC_CTRL_OSC_DISABLE_O_POS 3
+#define MXC_F_RTC_OSC_CTRL_OSC_DISABLE_O ((uint32_t)(0x00000001UL << MXC_F_RTC_OSC_CTRL_OSC_DISABLE_O_POS))
+
+/* Offset Register Description
+ ====== ===================================================================== */
+typedef struct {
+ __IO uint32_t nano_counter; /* 0x0000 Nanoring Counter Read Register */
+ __IO uint32_t clk_ctrl; /* 0x0004 RTC Clock Control Settings */
+ __IO uint32_t dsen_ctrl; /* 0x0008 Dynamic Tamper Sensor Control */
+ __IO uint32_t osc_ctrl; /* 0x000C RTC Oscillator Control */
+} mxc_rtccfg_regs_t;
+
+/*
+ Register offsets for module RTCCFG.
+*/
+#define MXC_R_RTCCFG_OFFS_NANO_COUNTER ((uint32_t)0x00000000UL)
+#define MXC_R_RTCCFG_OFFS_CLK_CTRL ((uint32_t)0x00000004UL)
+#define MXC_R_RTCCFG_OFFS_DSEN_CTRL ((uint32_t)0x00000008UL)
+#define MXC_R_RTCCFG_OFFS_OSC_CTRL ((uint32_t)0x0000000CUL)
+
+#ifdef __cplusplus
+}
+#endif
+
+/**
+* @}
+*/
+
+#endif /* _MXC_RTC_REGS_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/spi_regs.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,215 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef _MXC_SPI_REGS_H
+#define _MXC_SPI_REGS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/**
+ * @file spi_regs.h
+ * @addtogroup spi SPI
+ * @{
+ */
+
+/* Offset Register Description
+ ====== ============================================ */
+typedef struct {
+ __IO uint32_t mstr_cfg; /* 0x0000 SPI Master Configuration Register */
+ __IO uint32_t ss_sr_polarity; /* 0x0004 Polarity Control for SS and SR Signals */
+ __IO uint32_t gen_ctrl; /* 0x0008 SPI Master General Control Register */
+ __IO uint32_t fifo_ctrl; /* 0x000C SPI Master FIFO Control Register */
+ __IO uint32_t spcl_ctrl; /* 0x0010 SPI Master Special Mode Controls */
+ __IO uint32_t intfl; /* 0x0014 SPI Master Interrupt Flags */
+ __IO uint32_t inten; /* 0x0018 SPI Master Interrupt Enable/Disable Settings */
+ __I uint32_t rsv001C; /* 0x001C Deprecated - was SPI_AHB_RETRY */
+} mxc_spi_regs_t;
+
+/**
+ * @brief TX FIFO register. Can do 8, 16, or 32 bit access.
+ */
+typedef struct {
+ union {
+ __O uint8_t txfifo_8;
+ __O uint16_t txfifo_16;
+ __O uint32_t txfifo_32;
+ };
+} mxc_spi_txfifo_regs_t;
+
+/**
+ * @brief RX FIFO register. Can do 8, 16, or 32 bit access.
+ */
+typedef struct {
+ union {
+ __I uint8_t rxfifo_8;
+ __I uint16_t rxfifo_16;
+ __I uint32_t rxfifo_32;
+ };
+} mxc_spi_rxfifo_regs_t;
+
+/*
+ Register offsets for module SPI.
+*/
+#define MXC_R_SPI_OFFS_MSTR_CFG ((uint32_t)0x00000000UL)
+#define MXC_R_SPI_OFFS_SS_SR_POLARITY ((uint32_t)0x00000004UL)
+#define MXC_R_SPI_OFFS_GEN_CTRL ((uint32_t)0x00000008UL)
+#define MXC_R_SPI_OFFS_FIFO_CTRL ((uint32_t)0x0000000CUL)
+#define MXC_R_SPI_OFFS_SPCL_CTRL ((uint32_t)0x00000010UL)
+#define MXC_R_SPI_OFFS_INTFL ((uint32_t)0x00000014UL)
+#define MXC_R_SPI_OFFS_INTEN ((uint32_t)0x00000018UL)
+
+#define MXC_R_SPI_FIFO_OFFS_TRANS ((uint32_t)0x00000000UL)
+#define MXC_R_SPI_FIFO_OFFS_RSLTS ((uint32_t)0x00000800UL)
+
+/*
+ Field positions and masks for module SPI.
+*/
+#define MXC_F_SPI_MSTR_CFG_SLAVE_SEL_POS 0
+#define MXC_F_SPI_MSTR_CFG_SLAVE_SEL ((uint32_t)(0x00000007UL << MXC_F_SPI_MSTR_CFG_SLAVE_SEL_POS))
+#define MXC_F_SPI_MSTR_CFG_THREE_WIRE_MODE_POS 3
+#define MXC_F_SPI_MSTR_CFG_THREE_WIRE_MODE ((uint32_t)(0x00000001UL << MXC_F_SPI_MSTR_CFG_THREE_WIRE_MODE_POS))
+#define MXC_F_SPI_MSTR_CFG_SPI_MODE_POS 4
+#define MXC_F_SPI_MSTR_CFG_SPI_MODE ((uint32_t)(0x00000003UL << MXC_F_SPI_MSTR_CFG_SPI_MODE_POS))
+#define MXC_F_SPI_MSTR_CFG_PAGE_SIZE_POS 6
+#define MXC_F_SPI_MSTR_CFG_PAGE_SIZE ((uint32_t)(0x00000003UL << MXC_F_SPI_MSTR_CFG_PAGE_SIZE_POS))
+#define MXC_F_SPI_MSTR_CFG_SCK_HI_CLK_POS 8
+#define MXC_F_SPI_MSTR_CFG_SCK_HI_CLK ((uint32_t)(0x0000000FUL << MXC_F_SPI_MSTR_CFG_SCK_HI_CLK_POS))
+#define MXC_F_SPI_MSTR_CFG_SCK_LO_CLK_POS 12
+#define MXC_F_SPI_MSTR_CFG_SCK_LO_CLK ((uint32_t)(0x0000000FUL << MXC_F_SPI_MSTR_CFG_SCK_LO_CLK_POS))
+#define MXC_F_SPI_MSTR_CFG_ACT_DELAY_POS 16
+#define MXC_F_SPI_MSTR_CFG_ACT_DELAY ((uint32_t)(0x00000003UL << MXC_F_SPI_MSTR_CFG_ACT_DELAY_POS))
+#define MXC_F_SPI_MSTR_CFG_INACT_DELAY_POS 18
+#define MXC_F_SPI_MSTR_CFG_INACT_DELAY ((uint32_t)(0x00000003UL << MXC_F_SPI_MSTR_CFG_INACT_DELAY_POS))
+#define MXC_F_SPI_MSTR_CFG_ALT_SCK_HI_CLK_POS 20
+#define MXC_F_SPI_MSTR_CFG_ALT_SCK_HI_CLK ((uint32_t)(0x0000000FUL << MXC_F_SPI_MSTR_CFG_ALT_SCK_HI_CLK_POS))
+#define MXC_F_SPI_MSTR_CFG_ALT_SCK_LO_CLK_POS 24
+#define MXC_F_SPI_MSTR_CFG_ALT_SCK_LO_CLK ((uint32_t)(0x0000000FUL << MXC_F_SPI_MSTR_CFG_ALT_SCK_LO_CLK_POS))
+
+#define MXC_F_SPI_SS_SR_POLARITY_SS_POLARITY_POS 0
+#define MXC_F_SPI_SS_SR_POLARITY_SS_POLARITY ((uint32_t)(0x000000FFUL << MXC_F_SPI_SS_SR_POLARITY_SS_POLARITY_POS))
+#define MXC_F_SPI_SS_SR_POLARITY_FC_POLARITY_POS 8
+#define MXC_F_SPI_SS_SR_POLARITY_FC_POLARITY ((uint32_t)(0x000000FFUL << MXC_F_SPI_SS_SR_POLARITY_FC_POLARITY_POS))
+
+#define MXC_F_SPI_GEN_CTRL_SPI_MSTR_EN_POS 0
+#define MXC_F_SPI_GEN_CTRL_SPI_MSTR_EN ((uint32_t)(0x00000001UL << MXC_F_SPI_GEN_CTRL_SPI_MSTR_EN_POS))
+#define MXC_F_SPI_GEN_CTRL_TX_FIFO_EN_POS 1
+#define MXC_F_SPI_GEN_CTRL_TX_FIFO_EN ((uint32_t)(0x00000001UL << MXC_F_SPI_GEN_CTRL_TX_FIFO_EN_POS))
+#define MXC_F_SPI_GEN_CTRL_RX_FIFO_EN_POS 2
+#define MXC_F_SPI_GEN_CTRL_RX_FIFO_EN ((uint32_t)(0x00000001UL << MXC_F_SPI_GEN_CTRL_RX_FIFO_EN_POS))
+#define MXC_F_SPI_GEN_CTRL_BIT_BANG_MODE_POS 3
+#define MXC_F_SPI_GEN_CTRL_BIT_BANG_MODE ((uint32_t)(0x00000001UL << MXC_F_SPI_GEN_CTRL_BIT_BANG_MODE_POS))
+#define MXC_F_SPI_GEN_CTRL_BB_SS_IN_OUT_POS 4
+#define MXC_F_SPI_GEN_CTRL_BB_SS_IN_OUT ((uint32_t)(0x00000001UL << MXC_F_SPI_GEN_CTRL_BB_SS_IN_OUT_POS))
+#define MXC_F_SPI_GEN_CTRL_BB_SR_IN_POS 5
+#define MXC_F_SPI_GEN_CTRL_BB_SR_IN ((uint32_t)(0x00000001UL << MXC_F_SPI_GEN_CTRL_BB_SR_IN_POS))
+#define MXC_F_SPI_GEN_CTRL_BB_SCK_IN_OUT_POS 6
+#define MXC_F_SPI_GEN_CTRL_BB_SCK_IN_OUT ((uint32_t)(0x00000001UL << MXC_F_SPI_GEN_CTRL_BB_SCK_IN_OUT_POS))
+#define MXC_F_SPI_GEN_CTRL_BB_SDIO_IN_POS 8
+#define MXC_F_SPI_GEN_CTRL_BB_SDIO_IN ((uint32_t)(0x0000000FUL << MXC_F_SPI_GEN_CTRL_BB_SDIO_IN_POS))
+#define MXC_F_SPI_GEN_CTRL_BB_SDIO_OUT_POS 12
+#define MXC_F_SPI_GEN_CTRL_BB_SDIO_OUT ((uint32_t)(0x0000000FUL << MXC_F_SPI_GEN_CTRL_BB_SDIO_OUT_POS))
+#define MXC_F_SPI_GEN_CTRL_BB_SDIO_DR_EN_POS 16
+#define MXC_F_SPI_GEN_CTRL_BB_SDIO_DR_EN ((uint32_t)(0x0000000FUL << MXC_F_SPI_GEN_CTRL_BB_SDIO_DR_EN_POS))
+
+#define MXC_F_SPI_FIFO_CTRL_TX_FIFO_AE_LVL_POS 0
+#define MXC_F_SPI_FIFO_CTRL_TX_FIFO_AE_LVL ((uint32_t)(0x0000000FUL << MXC_F_SPI_FIFO_CTRL_TX_FIFO_AE_LVL_POS))
+#define MXC_F_SPI_FIFO_CTRL_TX_FIFO_USED_POS 8
+#define MXC_F_SPI_FIFO_CTRL_TX_FIFO_USED ((uint32_t)(0x0000001FUL << MXC_F_SPI_FIFO_CTRL_TX_FIFO_USED_POS))
+#define MXC_F_SPI_FIFO_CTRL_RX_FIFO_AF_LVL_POS 16
+#define MXC_F_SPI_FIFO_CTRL_RX_FIFO_AF_LVL ((uint32_t)(0x0000001FUL << MXC_F_SPI_FIFO_CTRL_RX_FIFO_AF_LVL_POS))
+#define MXC_F_SPI_FIFO_CTRL_RX_FIFO_USED_POS 24
+#define MXC_F_SPI_FIFO_CTRL_RX_FIFO_USED ((uint32_t)(0x0000003FUL << MXC_F_SPI_FIFO_CTRL_RX_FIFO_USED_POS))
+
+#define MXC_F_SPI_SPCL_CTRL_SS_SAMPLE_MODE_POS 0
+#define MXC_F_SPI_SPCL_CTRL_SS_SAMPLE_MODE ((uint32_t)(0x00000001UL << MXC_F_SPI_SPCL_CTRL_SS_SAMPLE_MODE_POS))
+#define MXC_F_SPI_SPCL_CTRL_MISO_FC_EN_POS 1
+#define MXC_F_SPI_SPCL_CTRL_MISO_FC_EN ((uint32_t)(0x00000001UL << MXC_F_SPI_SPCL_CTRL_MISO_FC_EN_POS))
+#define MXC_F_SPI_SPCL_CTRL_SS_SA_SDIO_OUT_POS 4
+#define MXC_F_SPI_SPCL_CTRL_SS_SA_SDIO_OUT ((uint32_t)(0x0000000FUL << MXC_F_SPI_SPCL_CTRL_SS_SA_SDIO_OUT_POS))
+#define MXC_F_SPI_SPCL_CTRL_SS_SA_SDIO_DR_EN_POS 8
+#define MXC_F_SPI_SPCL_CTRL_SS_SA_SDIO_DR_EN ((uint32_t)(0x0000000FUL << MXC_F_SPI_SPCL_CTRL_SS_SA_SDIO_DR_EN_POS))
+
+#define MXC_F_SPI_INTFL_TX_STALLED_POS 0
+#define MXC_F_SPI_INTFL_TX_STALLED ((uint32_t)(0x00000001UL << MXC_F_SPI_INTFL_TX_STALLED_POS))
+#define MXC_F_SPI_INTFL_RX_STALLED_POS 1
+#define MXC_F_SPI_INTFL_RX_STALLED ((uint32_t)(0x00000001UL << MXC_F_SPI_INTFL_RX_STALLED_POS))
+#define MXC_F_SPI_INTFL_TX_READY_POS 2
+#define MXC_F_SPI_INTFL_TX_READY ((uint32_t)(0x00000001UL << MXC_F_SPI_INTFL_TX_READY_POS))
+#define MXC_F_SPI_INTFL_RX_DONE_POS 3
+#define MXC_F_SPI_INTFL_RX_DONE ((uint32_t)(0x00000001UL << MXC_F_SPI_INTFL_RX_DONE_POS))
+#define MXC_F_SPI_INTFL_TX_FIFO_AE_POS 4
+#define MXC_F_SPI_INTFL_TX_FIFO_AE ((uint32_t)(0x00000001UL << MXC_F_SPI_INTFL_TX_FIFO_AE_POS))
+#define MXC_F_SPI_INTFL_RX_FIFO_AF_POS 5
+#define MXC_F_SPI_INTFL_RX_FIFO_AF ((uint32_t)(0x00000001UL << MXC_F_SPI_INTFL_RX_FIFO_AF_POS))
+
+#define MXC_F_SPI_INTEN_TX_STALLED_POS 0
+#define MXC_F_SPI_INTEN_TX_STALLED ((uint32_t)(0x00000001UL << MXC_F_SPI_INTEN_TX_STALLED_POS))
+#define MXC_F_SPI_INTEN_RX_STALLED_POS 1
+#define MXC_F_SPI_INTEN_RX_STALLED ((uint32_t)(0x00000001UL << MXC_F_SPI_INTEN_RX_STALLED_POS))
+#define MXC_F_SPI_INTEN_TX_READY_POS 2
+#define MXC_F_SPI_INTEN_TX_READY ((uint32_t)(0x00000001UL << MXC_F_SPI_INTEN_TX_READY_POS))
+#define MXC_F_SPI_INTEN_RX_DONE_POS 3
+#define MXC_F_SPI_INTEN_RX_DONE ((uint32_t)(0x00000001UL << MXC_F_SPI_INTEN_RX_DONE_POS))
+#define MXC_F_SPI_INTEN_TX_FIFO_AE_POS 4
+#define MXC_F_SPI_INTEN_TX_FIFO_AE ((uint32_t)(0x00000001UL << MXC_F_SPI_INTEN_TX_FIFO_AE_POS))
+#define MXC_F_SPI_INTEN_RX_FIFO_AF_POS 5
+#define MXC_F_SPI_INTEN_RX_FIFO_AF ((uint32_t)(0x00000001UL << MXC_F_SPI_INTEN_RX_FIFO_AF_POS))
+
+#define MXC_F_SPI_FIFO_DIR_POS 0
+#define MXC_F_SPI_FIFO_DIR ((uint32_t)(0x00000003UL << MXC_F_SPI_FIFO_DIR_POS))
+#define MXC_F_SPI_FIFO_UNIT_POS 2
+#define MXC_F_SPI_FIFO_UNIT ((uint32_t)(0x00000003UL << MXC_F_SPI_FIFO_UNIT_POS))
+#define MXC_F_SPI_FIFO_SIZE_POS 4
+#define MXC_F_SPI_FIFO_SIZE ((uint32_t)(0x0000000FUL << MXC_F_SPI_FIFO_SIZE_POS))
+#define MXC_F_SPI_FIFO_WIDTH_POS 9
+#define MXC_F_SPI_FIFO_WIDTH ((uint32_t)(0x00000001UL << MXC_F_SPI_FIFO_WIDTH_POS))
+#define MXC_F_SPI_FIFO_ALT_POS 11
+#define MXC_F_SPI_FIFO_ALT ((uint32_t)(0x00000001UL << MXC_F_SPI_FIFO_ALT_POS))
+#define MXC_F_SPI_FIFO_FLOW_POS 12
+#define MXC_F_SPI_FIFO_FLOW ((uint32_t)(0x00000001UL << MXC_F_SPI_FIFO_FLOW_POS))
+#define MXC_F_SPI_FIFO_DASS_POS 13
+#define MXC_F_SPI_FIFO_DASS ((uint32_t)(0x00000001UL << MXC_F_SPI_FIFO_DASS_POS))
+
+#ifdef __cplusplus
+}
+#endif
+
+/**
+* @}
+*/
+
+#endif /* _MXC_SPI_REGS_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/system_max32600.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,53 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef SYSTEM_MAX32600_H_
+#define SYSTEM_MAX32600_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+extern void SystemInit (void);
+
+extern void SystemCoreClockUpdate (void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* SYSTEM_MAX32600_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/tmr_regs.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,146 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef _MXC_TMR_REGS_H
+#define _MXC_TMR_REGS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/**
+ * @file tmr_regs.h
+ * @addtogroup tmr TMR
+ * @{
+ */
+
+/**
+ * @brief Defines timer modes for 16 and 32-bit timers
+ */
+typedef enum {
+ /** 32-bit or 16-bit timer one-shot mode */
+ MXC_E_TMR_MODE_ONE_SHOT = 0,
+ /** 32-bit or 16-bit timer one-shot mode */
+ MXC_E_TMR_MODE_CONTINUOUS,
+ /** 32-bit timer counter mode */
+ MXC_E_TMR_MODE_COUNTER,
+ /** 32-bit timer pulse width modulation mode */
+ MXC_E_TMR_MODE_PWM,
+ /** 32-bit timer capture mode */
+ MXC_E_TMR_MODE_CAPTURE,
+ /** 32-bit timer compare mode */
+ MXC_E_TMR_MODE_COMPARE,
+ /** 32-bit timer gated mode */
+ MXC_E_TMR_MODE_GATED,
+ /** 32-bit timer measure mode */
+ MXC_E_TMR_MODE_MEASURE
+} mxc_tmr_mode_t;
+
+/* Offset Register Description
+ ====== ============================================== */
+typedef struct {
+ __IO uint32_t ctrl; /* 0x0000 Timer Control Register */
+ __IO uint32_t count32; /* 0x0004 [32 bit] Current Count Value */
+ __IO uint32_t term_cnt32; /* 0x0008 [32 bit] Terminal Count Setting */
+ __IO uint32_t pwm_cap32; /* 0x000C [32 bit] PWM Compare Setting or Capture/Measure Value */
+ __IO uint32_t count16_0; /* 0x0010 [16 bit] Current Count Value, 16-bit Timer0 */
+ __IO uint32_t term_cnt16_0; /* 0x0014 [16 bit] Terminal Count Setting, 16-bit Timer0 */
+ __IO uint32_t count16_1; /* 0x0018 [16 bit] Current Count Value, 16-bit Timer1 */
+ __IO uint32_t term_cnt16_1; /* 0x001C [16 bit] Terminal Count Setting, 16-bit Timer1 */
+ __IO uint32_t intfl; /* 0x0020 Timer Module Interrupt Flags */
+ __IO uint32_t inten; /* 0x0024 Timer Module Interrupt Enable/Disable Settings */
+} mxc_tmr_regs_t;
+
+/*
+ Register offsets for module TMR.
+*/
+#define MXC_R_TMR_OFFS_CTRL ((uint32_t)0x00000000UL)
+#define MXC_R_TMR_OFFS_COUNT32 ((uint32_t)0x00000004UL)
+#define MXC_R_TMR_OFFS_TERM_CNT32 ((uint32_t)0x00000008UL)
+#define MXC_R_TMR_OFFS_PWM_CAP32 ((uint32_t)0x0000000CUL)
+#define MXC_R_TMR_OFFS_COUNT16_0 ((uint32_t)0x00000010UL)
+#define MXC_R_TMR_OFFS_TERM_CNT16_0 ((uint32_t)0x00000014UL)
+#define MXC_R_TMR_OFFS_COUNT16_1 ((uint32_t)0x00000018UL)
+#define MXC_R_TMR_OFFS_TERM_CNT16_1 ((uint32_t)0x0000001CUL)
+#define MXC_R_TMR_OFFS_INTFL ((uint32_t)0x00000020UL)
+#define MXC_R_TMR_OFFS_INTEN ((uint32_t)0x00000024UL)
+
+/*
+ Field positions and masks for module TMR.
+*/
+#define MXC_F_TMR_CTRL_MODE_POS 0
+#define MXC_F_TMR_CTRL_MODE ((uint32_t)(0x00000007UL << MXC_F_TMR_CTRL_MODE_POS))
+#define MXC_F_TMR_CTRL_TMR2X16_POS 3
+#define MXC_F_TMR_CTRL_TMR2X16 ((uint32_t)(0x00000001UL << MXC_F_TMR_CTRL_TMR2X16_POS))
+#define MXC_F_TMR_CTRL_PRESCALE_POS 4
+#define MXC_F_TMR_CTRL_PRESCALE ((uint32_t)(0x0000000FUL << MXC_F_TMR_CTRL_PRESCALE_POS))
+#define MXC_F_TMR_CTRL_POLARITY_POS 8
+#define MXC_F_TMR_CTRL_POLARITY ((uint32_t)(0x00000001UL << MXC_F_TMR_CTRL_POLARITY_POS))
+#define MXC_F_TMR_CTRL_ENABLE0_POS 12
+#define MXC_F_TMR_CTRL_ENABLE0 ((uint32_t)(0x00000001UL << MXC_F_TMR_CTRL_ENABLE0_POS))
+#define MXC_F_TMR_CTRL_ENABLE1_POS 13
+#define MXC_F_TMR_CTRL_ENABLE1 ((uint32_t)(0x00000001UL << MXC_F_TMR_CTRL_ENABLE1_POS))
+
+#define MXC_F_TMR_COUNT16_0_VALUE_POS 0
+#define MXC_F_TMR_COUNT16_0_VALUE ((uint32_t)(0x0000FFFFUL << MXC_F_TMR_COUNT16_0_VALUE_POS))
+
+#define MXC_F_TMR_TERM_CNT16_0_TERM_COUNT_POS 0
+#define MXC_F_TMR_TERM_CNT16_0_TERM_COUNT ((uint32_t)(0x0000FFFFUL << MXC_F_TMR_TERM_CNT16_0_TERM_COUNT_POS))
+
+#define MXC_F_TMR_COUNT16_1_VALUE_POS 0
+#define MXC_F_TMR_COUNT16_1_VALUE ((uint32_t)(0x0000FFFFUL << MXC_F_TMR_COUNT16_1_VALUE_POS))
+
+#define MXC_F_TMR_TERM_CNT16_1_TERM_COUNT_POS 0
+#define MXC_F_TMR_TERM_CNT16_1_TERM_COUNT ((uint32_t)(0x0000FFFFUL << MXC_F_TMR_TERM_CNT16_1_TERM_COUNT_POS))
+
+#define MXC_F_TMR_INTFL_TIMER0_POS 0
+#define MXC_F_TMR_INTFL_TIMER0 ((uint32_t)(0x00000001UL << MXC_F_TMR_INTFL_TIMER0_POS))
+#define MXC_F_TMR_INTFL_TIMER1_POS 1
+#define MXC_F_TMR_INTFL_TIMER1 ((uint32_t)(0x00000001UL << MXC_F_TMR_INTFL_TIMER1_POS))
+
+#define MXC_F_TMR_INTEN_TIMER0_POS 0
+#define MXC_F_TMR_INTEN_TIMER0 ((uint32_t)(0x00000001UL << MXC_F_TMR_INTEN_TIMER0_POS))
+#define MXC_F_TMR_INTEN_TIMER1_POS 1
+#define MXC_F_TMR_INTEN_TIMER1 ((uint32_t)(0x00000001UL << MXC_F_TMR_INTEN_TIMER1_POS))
+
+#ifdef __cplusplus
+}
+#endif
+
+/**
+* @}
+*/
+
+#endif /* _MXC_TMR_REGS_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/tpu_regs.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,108 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef _MXC_TPU_REGS_H_
+#define _MXC_TPU_REGS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/**
+ * @file tpu_regs.h
+ * @addtogroup tpu TPU
+ * @{
+ */
+
+/* Offset Register Description
+ ====== ================================================== */
+typedef struct {
+ __I uint32_t rsv0000; /* 0x0000 Reserved */
+ __I uint32_t rsv0004; /* 0x0004 Reserved - PUF Control (Deprecated) */
+ __I uint32_t rsv0008; /* 0x0008 Reserved - PUF Output (Deprecated) */
+ __I uint32_t rsv000C[125]; /* 0x000C */
+ __IO uint32_t prng_user_entropy; /* 0x0200 PRNG User Entropy Value */
+ __IO uint32_t prng_rnd_num; /* 0x0204 PRNG Random Number Output */
+} mxc_tpu_regs_t;
+
+/* Offset Register Description
+ ====== ================================================= */
+typedef struct {
+ __IO uint32_t status; /* 0x0000 Dynamic Tamper Sensor Status */
+ __IO uint32_t ctrl0; /* 0x0004 Dynamic Tamper Sensor Control 0 */
+ __IO uint32_t ctrl1; /* 0x0008 Dynamic Tamper Sensor Control 1 */
+ __IO uint32_t sks0; /* 0x0010 TPU Secure Key Storage Register 0 */
+ __IO uint32_t sks1; /* 0x0014 TPU Secure Key Storage Register 0 */
+ __IO uint32_t sks2; /* 0x0018 TPU Secure Key Storage Register 0 */
+ __IO uint32_t sks3; /* 0x001C TPU Secure Key Storage Register 0 */
+} mxc_tpu_tsr_regs_t;
+
+/*
+ Register offsets for module TPU.
+*/
+#define MXC_R_TPU_OFFS_PRNG_USER_ENTROPY ((uint32_t)0x00000200UL)
+#define MXC_R_TPU_OFFS_PRNG_RND_NUM ((uint32_t)0x00000204UL)
+#define MXC_R_TPU_TSR_OFFS_STATUS ((uint32_t)0x00000000UL)
+#define MXC_R_TPU_TSR_OFFS_CTRL0 ((uint32_t)0x00000004UL)
+#define MXC_R_TPU_TSR_OFFS_CTRL1 ((uint32_t)0x00000008UL)
+#define MXC_R_TPU_TSR_OFFS_SKS0 ((uint32_t)0x00000010UL)
+#define MXC_R_TPU_TSR_OFFS_SKS1 ((uint32_t)0x00000014UL)
+#define MXC_R_TPU_TSR_OFFS_SKS2 ((uint32_t)0x00000018UL)
+#define MXC_R_TPU_TSR_OFFS_SKS3 ((uint32_t)0x0000001CUL)
+
+
+/*
+ Field positions and masks for module TPU.
+*/
+#define MXC_F_TPU_CTRL0_ERR_THR_POS 0
+#define MXC_F_TPU_CTRL0_ERR_THR ((uint32_t)(0x0000001FUL << MXC_F_TPU_CTRL0_ERR_THR_POS))
+#define MXC_F_TPU_CTRL0_OUT_FREQ_POS 5
+#define MXC_F_TPU_CTRL0_OUT_FREQ ((uint32_t)(0x00000007UL << MXC_F_TPU_CTRL0_OUT_FREQ_POS))
+#define MXC_F_TPU_CTRL0_CLOCK_DIV_POS 8
+#define MXC_F_TPU_CTRL0_CLOCK_DIV ((uint32_t)(0x00000007UL << MXC_F_TPU_CTRL0_CLOCK_DIV_POS))
+#define MXC_F_TPU_CTRL0_RTC_TX_BUSY_POS 14
+#define MXC_F_TPU_CTRL0_RTC_TX_BUSY ((uint32_t)(0x00000001UL << MXC_F_TPU_CTRL0_RTC_TX_BUSY_POS))
+#define MXC_F_TPU_CTRL0_LOCK_POS 15
+#define MXC_F_TPU_CTRL0_LOCK ((uint32_t)(0x00000001UL << MXC_F_TPU_CTRL0_LOCK_POS))
+
+#ifdef __cplusplus
+}
+#endif
+
+/**
+* @}
+*/
+
+#endif /* _MXC_TPU_REGS_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/trim_regs.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,92 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef _MXC_TRIM_REGS_H
+#define _MXC_TRIM_REGS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+typedef struct {
+ __IO uint32_t trim_reg_00;
+ __IO uint32_t trim_reg_01;
+ __IO uint32_t trim_reg_02;
+ __IO uint32_t trim_reg_03;
+ __IO uint32_t trim_reg_04;
+ __IO uint32_t trim_reg_05;
+ __IO uint32_t trim_reg_06;
+ __IO uint32_t trim_reg_07;
+ __IO uint32_t trim_reg_08;
+ __IO uint32_t trim_reg_09;
+ __IO uint32_t trim_reg_10;
+ __IO uint32_t trim_reg_11;
+ __IO uint32_t trim_reg_12;
+ __IO uint32_t trim_reg_13;
+ __IO uint32_t trim_reg_14;
+ __IO uint32_t trim_reg_15;
+ __IO uint32_t trim_reg_16;
+ __IO uint32_t trim_reg_17;
+ __IO uint32_t trim_reg_18;
+ __IO uint32_t trim_reg_19;
+ __IO uint32_t trim_reg_20;
+ __IO uint32_t trim_reg_21;
+ __IO uint32_t trim_reg_22;
+ __IO uint32_t trim_reg_23;
+ __IO uint32_t trim_reg_24;
+ __IO uint32_t trim_reg_25;
+ __IO uint32_t trim_reg_26;
+ __IO uint32_t trim_reg_27;
+ __IO uint32_t trim_reg_28;
+ __IO uint32_t trim_reg_29;
+ __IO uint32_t trim_reg_30;
+ __IO uint32_t trim_reg_31;
+ __IO uint32_t trim_reg_32;
+ __IO uint32_t trim_reg_33;
+ __IO uint32_t trim_reg_34;
+ __IO uint32_t trim_reg_35;
+ __IO uint32_t trim_reg_36;
+ __IO uint32_t trim_reg_37;
+ __IO uint32_t trim_reg_38;
+ __IO uint32_t trim_reg_39;
+ __IO uint32_t trim_reg_40;
+ __IO uint32_t trim_reg_41;
+} mxc_ftr_regs_t;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _MXC_TRIM_REGS_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/uart_regs.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,175 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef _MXC_UART_REGS_H_
+#define _MXC_UART_REGS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/**
+ * @file uart_regs.h
+ * @addtogroup uart UART
+ * @{
+ */
+
+/* Offset Register Description
+ ====== ============================================== */
+typedef struct {
+ __IO uint32_t ctrl; /* 0x0000 UART Control Register */
+ __IO uint32_t status; /* 0x0004 UART Status Register */
+ __IO uint32_t inten; /* 0x0008 Interrupt Enable/Disable Controls */
+ __IO uint32_t intfl; /* 0x000C Interrupt Flags */
+ __IO uint32_t baud_int; /* 0x0010 Baud Rate Setting (Integer Portion) */
+ __IO uint32_t baud_div_128; /* 0x0014 Baud Rate Setting */
+ __IO uint32_t tx_fifo_out; /* 0x0018 TX FIFO Output End (read-only) */
+ __IO uint32_t hw_flow_ctrl; /* 0x001C Hardware Flow Control Register */
+ __IO uint32_t tx_rx_fifo; /* 0x0020 Write to load TX FIFO, Read to unload RX FIFO */
+} mxc_uart_regs_t;
+
+
+/*
+ Register offsets for module UART.
+*/
+#define MXC_R_UART_OFFS_CTRL ((uint32_t)0x00000000UL)
+#define MXC_R_UART_OFFS_STATUS ((uint32_t)0x00000004UL)
+#define MXC_R_UART_OFFS_INTEN ((uint32_t)0x00000008UL)
+#define MXC_R_UART_OFFS_INTFL ((uint32_t)0x0000000CUL)
+#define MXC_R_UART_OFFS_BAUD_INT ((uint32_t)0x00000010UL)
+#define MXC_R_UART_OFFS_BAUD_DIV_128 ((uint32_t)0x00000014UL)
+#define MXC_R_UART_OFFS_TX_FIFO_OUT ((uint32_t)0x00000018UL)
+#define MXC_R_UART_OFFS_HW_FLOW_CTRL ((uint32_t)0x0000001CUL)
+#define MXC_R_UART_OFFS_TX_RX_FIFO ((uint32_t)0x00000020UL)
+
+/*
+ Field positions and masks for module UART.
+*/
+#define MXC_F_UART_CTRL_RX_THRESHOLD_POS 0
+#define MXC_F_UART_CTRL_RX_THRESHOLD ((uint32_t)(0x00000007UL << MXC_F_UART_CTRL_RX_THRESHOLD_POS))
+#define MXC_F_UART_CTRL_PARITY_ENABLE_POS 4
+#define MXC_F_UART_CTRL_PARITY_ENABLE ((uint32_t)(0x00000001UL << MXC_F_UART_CTRL_PARITY_ENABLE_POS))
+#define MXC_F_UART_CTRL_PARITY_MODE_POS 5
+#define MXC_F_UART_CTRL_PARITY_MODE ((uint32_t)(0x00000001UL << MXC_F_UART_CTRL_PARITY_MODE_POS))
+#define MXC_F_UART_CTRL_PARITY_BIAS_POS 6
+#define MXC_F_UART_CTRL_PARITY_BIAS ((uint32_t)(0x00000001UL << MXC_F_UART_CTRL_PARITY_BIAS_POS))
+#define MXC_F_UART_CTRL_TX_FIFO_FLUSH_POS 8
+#define MXC_F_UART_CTRL_TX_FIFO_FLUSH ((uint32_t)(0x00000001UL << MXC_F_UART_CTRL_TX_FIFO_FLUSH_POS))
+#define MXC_F_UART_CTRL_RX_FIFO_FLUSH_POS 9
+#define MXC_F_UART_CTRL_RX_FIFO_FLUSH ((uint32_t)(0x00000001UL << MXC_F_UART_CTRL_RX_FIFO_FLUSH_POS))
+#define MXC_F_UART_CTRL_CHAR_LENGTH_POS 10
+#define MXC_F_UART_CTRL_CHAR_LENGTH ((uint32_t)(0x00000003UL << MXC_F_UART_CTRL_CHAR_LENGTH_POS))
+#define MXC_F_UART_CTRL_STOP_BIT_MODE_POS 12
+#define MXC_F_UART_CTRL_STOP_BIT_MODE ((uint32_t)(0x00000001UL << MXC_F_UART_CTRL_STOP_BIT_MODE_POS))
+#define MXC_F_UART_CTRL_HW_FLOW_CTRL_EN_POS 13
+#define MXC_F_UART_CTRL_HW_FLOW_CTRL_EN ((uint32_t)(0x00000001UL << MXC_F_UART_CTRL_HW_FLOW_CTRL_EN_POS))
+#define MXC_F_UART_CTRL_BAUD_CLK_EN_POS 14
+#define MXC_F_UART_CTRL_BAUD_CLK_EN ((uint32_t)(0x00000001UL << MXC_F_UART_CTRL_BAUD_CLK_EN_POS))
+
+#define MXC_F_UART_STATUS_TX_BUSY_POS 0
+#define MXC_F_UART_STATUS_TX_BUSY ((uint32_t)(0x00000001UL << MXC_F_UART_STATUS_TX_BUSY_POS))
+#define MXC_F_UART_STATUS_RX_BUSY_POS 1
+#define MXC_F_UART_STATUS_RX_BUSY ((uint32_t)(0x00000001UL << MXC_F_UART_STATUS_RX_BUSY_POS))
+#define MXC_F_UART_STATUS_RX_FIFO_EMPTY_POS 4
+#define MXC_F_UART_STATUS_RX_FIFO_EMPTY ((uint32_t)(0x00000001UL << MXC_F_UART_STATUS_RX_FIFO_EMPTY_POS))
+#define MXC_F_UART_STATUS_RX_FIFO_FULL_POS 5
+#define MXC_F_UART_STATUS_RX_FIFO_FULL ((uint32_t)(0x00000001UL << MXC_F_UART_STATUS_RX_FIFO_FULL_POS))
+#define MXC_F_UART_STATUS_TX_FIFO_EMPTY_POS 6
+#define MXC_F_UART_STATUS_TX_FIFO_EMPTY ((uint32_t)(0x00000001UL << MXC_F_UART_STATUS_TX_FIFO_EMPTY_POS))
+#define MXC_F_UART_STATUS_TX_FIFO_FULL_POS 7
+#define MXC_F_UART_STATUS_TX_FIFO_FULL ((uint32_t)(0x00000001UL << MXC_F_UART_STATUS_TX_FIFO_FULL_POS))
+#define MXC_F_UART_STATUS_RX_FIFO_CHARS_POS 8
+#define MXC_F_UART_STATUS_RX_FIFO_CHARS ((uint32_t)(0x0000000FUL << MXC_F_UART_STATUS_RX_FIFO_CHARS_POS))
+#define MXC_F_UART_STATUS_TX_FIFO_CHARS_POS 12
+#define MXC_F_UART_STATUS_TX_FIFO_CHARS ((uint32_t)(0x0000000FUL << MXC_F_UART_STATUS_TX_FIFO_CHARS_POS))
+
+#define MXC_F_UART_INTEN_RX_FRAME_ERROR_POS 0
+#define MXC_F_UART_INTEN_RX_FRAME_ERROR ((uint32_t)(0x00000001UL << MXC_F_UART_INTEN_RX_FRAME_ERROR_POS))
+#define MXC_F_UART_INTEN_RX_PARITY_ERROR_POS 1
+#define MXC_F_UART_INTEN_RX_PARITY_ERROR ((uint32_t)(0x00000001UL << MXC_F_UART_INTEN_RX_PARITY_ERROR_POS))
+#define MXC_F_UART_INTEN_CTS_CHANGE_POS 2
+#define MXC_F_UART_INTEN_CTS_CHANGE ((uint32_t)(0x00000001UL << MXC_F_UART_INTEN_CTS_CHANGE_POS))
+#define MXC_F_UART_INTEN_RX_OVERRUN_POS 3
+#define MXC_F_UART_INTEN_RX_OVERRUN ((uint32_t)(0x00000001UL << MXC_F_UART_INTEN_RX_OVERRUN_POS))
+#define MXC_F_UART_INTEN_RX_OVER_THRESHOLD_POS 4
+#define MXC_F_UART_INTEN_RX_OVER_THRESHOLD ((uint32_t)(0x00000001UL << MXC_F_UART_INTEN_RX_OVER_THRESHOLD_POS))
+#define MXC_F_UART_INTEN_TX_ALMOST_EMPTY_POS 5
+#define MXC_F_UART_INTEN_TX_ALMOST_EMPTY ((uint32_t)(0x00000001UL << MXC_F_UART_INTEN_TX_ALMOST_EMPTY_POS))
+#define MXC_F_UART_INTEN_TX_HALF_EMPTY_POS 6
+#define MXC_F_UART_INTEN_TX_HALF_EMPTY ((uint32_t)(0x00000001UL << MXC_F_UART_INTEN_TX_HALF_EMPTY_POS))
+
+#define MXC_F_UART_INTFL_RX_FRAME_ERROR_POS 0
+#define MXC_F_UART_INTFL_RX_FRAME_ERROR ((uint32_t)(0x00000001UL << MXC_F_UART_INTFL_RX_FRAME_ERROR_POS))
+#define MXC_F_UART_INTFL_RX_PARITY_ERROR_POS 1
+#define MXC_F_UART_INTFL_RX_PARITY_ERROR ((uint32_t)(0x00000001UL << MXC_F_UART_INTFL_RX_PARITY_ERROR_POS))
+#define MXC_F_UART_INTFL_CTS_CHANGE_POS 2
+#define MXC_F_UART_INTFL_CTS_CHANGE ((uint32_t)(0x00000001UL << MXC_F_UART_INTFL_CTS_CHANGE_POS))
+#define MXC_F_UART_INTFL_RX_OVERRUN_POS 3
+#define MXC_F_UART_INTFL_RX_OVERRUN ((uint32_t)(0x00000001UL << MXC_F_UART_INTFL_RX_OVERRUN_POS))
+#define MXC_F_UART_INTFL_RX_OVER_THRESHOLD_POS 4
+#define MXC_F_UART_INTFL_RX_OVER_THRESHOLD ((uint32_t)(0x00000001UL << MXC_F_UART_INTFL_RX_OVER_THRESHOLD_POS))
+#define MXC_F_UART_INTFL_TX_ALMOST_EMPTY_POS 5
+#define MXC_F_UART_INTFL_TX_ALMOST_EMPTY ((uint32_t)(0x00000001UL << MXC_F_UART_INTFL_TX_ALMOST_EMPTY_POS))
+#define MXC_F_UART_INTFL_TX_HALF_EMPTY_POS 6
+#define MXC_F_UART_INTFL_TX_HALF_EMPTY ((uint32_t)(0x00000001UL << MXC_F_UART_INTFL_TX_HALF_EMPTY_POS))
+
+#define MXC_F_UART_BAUD_INT_FBAUD_POS 0
+#define MXC_F_UART_BAUD_INT_FBAUD ((uint32_t)(0x00000FFFUL << MXC_F_UART_BAUD_INT_FBAUD_POS))
+
+#define MXC_F_UART_BAUD_DIV_128_DIV_POS 0
+#define MXC_F_UART_BAUD_DIV_128_DIV ((uint32_t)(0x0000007FUL << MXC_F_UART_BAUD_DIV_128_DIV_POS))
+
+#define MXC_F_UART_TX_FIFO_OUT_TX_FIFO_POS 0
+#define MXC_F_UART_TX_FIFO_OUT_TX_FIFO ((uint32_t)(0x000000FFUL << MXC_F_UART_TX_FIFO_OUT_TX_FIFO_POS))
+
+#define MXC_F_UART_HW_FLOW_CTRL_CTS_INPUT_POS 0
+#define MXC_F_UART_HW_FLOW_CTRL_CTS_INPUT ((uint32_t)(0x00000001UL << MXC_F_UART_HW_FLOW_CTRL_CTS_INPUT_POS))
+#define MXC_F_UART_HW_FLOW_CTRL_RTS_OUTPUT_POS 1
+#define MXC_F_UART_HW_FLOW_CTRL_RTS_OUTPUT ((uint32_t)(0x00000001UL << MXC_F_UART_HW_FLOW_CTRL_RTS_OUTPUT_POS))
+
+#define MXC_F_UART_TX_RX_FIFO_FIFO_DATA_POS 0
+#define MXC_F_UART_TX_RX_FIFO_FIFO_DATA ((uint32_t)(0x000000FFUL << MXC_F_UART_TX_RX_FIFO_FIFO_DATA_POS))
+#define MXC_F_UART_TX_RX_FIFO_PARITY_ERROR_POS 8
+#define MXC_F_UART_TX_RX_FIFO_PARITY_ERROR ((uint32_t)(0x00000001UL << MXC_F_UART_TX_RX_FIFO_PARITY_ERROR_POS))
+
+#ifdef __cplusplus
+}
+#endif
+
+/**
+* @}
+*/
+
+#endif /* _MXC_UART_REGS_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/usb_regs.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,480 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef _MXC_USB_REGS_H_
+#define _MXC_USB_REGS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/**
+ * @file usb_regs.h
+ * @addtogroup usb USB
+ * @{
+ */
+
+/* Offset Register Description
+ ====== ================================================ */
+typedef struct {
+ __IO uint32_t cn; /* 0x0000 USB Control Register */
+ __I uint32_t rsv0004[127]; /* 0x0004 */
+ __IO uint32_t dev_addr; /* 0x0200 USB Device Address Register */
+ __IO uint32_t dev_cn; /* 0x0204 USB Device Control Register */
+ __IO uint32_t dev_intfl; /* 0x0208 USB Device Interrupt */
+ __IO uint32_t dev_inten; /* 0x020C USB Device Interrupt Enable */
+ __I uint32_t rsv0210[4]; /* 0x0210 */
+ __IO uint32_t ep_base; /* 0x0220 USB Endpoint Descriptor Table Base Address */
+ __IO uint32_t cur_buf; /* 0x0224 USB Current Endpoint Buffer Register */
+ __IO uint32_t in_owner; /* 0x0228 USB IN Endpoint Buffer Owner Register */
+ __IO uint32_t out_owner; /* 0x022C USB OUT Endpoint Buffer Owner Register */
+ __IO uint32_t in_int; /* 0x0230 USB IN Endpoint Buffer Available Interrupt */
+ __IO uint32_t out_int; /* 0x0234 USB OUT Endpoint Data Available Interrupt */
+ __IO uint32_t nak_int; /* 0x0238 USB IN Endpoint NAK Interrupt */
+ __IO uint32_t dma_err_int; /* 0x023C USB DMA Error Interrupt */
+ __IO uint32_t buf_ovr_int; /* 0x0240 USB Buffer Overflow Interrupt */
+ __I uint32_t rsv0244[7]; /* 0x0244 */
+ __IO uint32_t setup0; /* 0x0260 USB SETUP Packet Bytes 0 to 3 */
+ __IO uint32_t setup1; /* 0x0264 USB SETUP Packet Bytes 4 to 7 */
+ __I uint32_t rsv0268[6]; /* 0x0268 */
+ __IO uint32_t ep[MXC_USB_NUM_EP]; /* 0x0280 USB Endpoint Control Registers */
+} mxc_usb_regs_t;
+
+
+/*
+ Register offsets for module USB.
+*/
+#define MXC_R_USB_OFFS_CN ((uint32_t)0x00000000UL)
+#define MXC_R_USB_OFFS_DEV_ADDR ((uint32_t)0x00000200UL)
+#define MXC_R_USB_OFFS_DEV_CN ((uint32_t)0x00000204UL)
+#define MXC_R_USB_OFFS_DEV_INTFL ((uint32_t)0x00000208UL)
+#define MXC_R_USB_OFFS_DEV_INTEN ((uint32_t)0x0000020CUL)
+#define MXC_R_USB_OFFS_EP_BASE ((uint32_t)0x00000220UL)
+#define MXC_R_USB_OFFS_CUR_BUF ((uint32_t)0x00000224UL)
+#define MXC_R_USB_OFFS_IN_OWNER ((uint32_t)0x00000228UL)
+#define MXC_R_USB_OFFS_OUT_OWNER ((uint32_t)0x0000022CUL)
+#define MXC_R_USB_OFFS_IN_INT ((uint32_t)0x00000230UL)
+#define MXC_R_USB_OFFS_OUT_INT ((uint32_t)0x00000234UL)
+#define MXC_R_USB_OFFS_NAK_INT ((uint32_t)0x00000238UL)
+#define MXC_R_USB_OFFS_DMA_ERR_INT ((uint32_t)0x0000023CUL)
+#define MXC_R_USB_OFFS_BUF_OVR_INT ((uint32_t)0x00000240UL)
+#define MXC_R_USB_OFFS_SETUP0 ((uint32_t)0x00000260UL)
+#define MXC_R_USB_OFFS_SETUP1 ((uint32_t)0x00000264UL)
+#define MXC_R_USB_OFFS_EP0 ((uint32_t)0x00000280UL)
+#define MXC_R_USB_OFFS_EP1 ((uint32_t)0x00000284UL)
+#define MXC_R_USB_OFFS_EP2 ((uint32_t)0x00000288UL)
+#define MXC_R_USB_OFFS_EP3 ((uint32_t)0x0000028CUL)
+#define MXC_R_USB_OFFS_EP4 ((uint32_t)0x00000290UL)
+#define MXC_R_USB_OFFS_EP5 ((uint32_t)0x00000294UL)
+#define MXC_R_USB_OFFS_EP6 ((uint32_t)0x00000298UL)
+#define MXC_R_USB_OFFS_EP7 ((uint32_t)0x0000029CUL)
+
+
+/*
+ Field positions and masks for module USB.
+*/
+#define MXC_F_USB_CN_USB_EN_POS 0
+#define MXC_F_USB_CN_USB_EN ((uint32_t)(0x00000001UL << MXC_F_USB_CN_USB_EN_POS))
+
+#define MXC_F_USB_DEV_ADDR_DEV_ADDR_POS 0
+#define MXC_F_USB_DEV_ADDR_DEV_ADDR ((uint32_t)(0x0000007FUL << MXC_F_USB_DEV_ADDR_DEV_ADDR_POS))
+
+#define MXC_F_USB_DEV_CN_SIGRWU_POS 2
+#define MXC_F_USB_DEV_CN_SIGRWU ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_CN_SIGRWU_POS))
+#define MXC_F_USB_DEV_CN_CONNECT_POS 3
+#define MXC_F_USB_DEV_CN_CONNECT ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_CN_CONNECT_POS))
+#define MXC_F_USB_DEV_CN_ULPM_POS 4
+#define MXC_F_USB_DEV_CN_ULPM ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_CN_ULPM_POS))
+#define MXC_F_USB_DEV_CN_URST_POS 5
+#define MXC_F_USB_DEV_CN_URST ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_CN_URST_POS))
+#define MXC_F_USB_DEV_CN_VBGATE_POS 6
+#define MXC_F_USB_DEV_CN_VBGATE ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_CN_VBGATE_POS))
+#define MXC_F_USB_DEV_CN_FIFO_MODE_POS 9
+#define MXC_F_USB_DEV_CN_FIFO_MODE ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_CN_FIFO_MODE_POS))
+
+#define MXC_F_USB_DEV_INTFL_DPACT_POS 0
+#define MXC_F_USB_DEV_INTFL_DPACT ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTFL_DPACT_POS))
+#define MXC_F_USB_DEV_INTFL_RWU_DN_POS 1
+#define MXC_F_USB_DEV_INTFL_RWU_DN ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTFL_RWU_DN_POS))
+#define MXC_F_USB_DEV_INTFL_BACT_POS 2
+#define MXC_F_USB_DEV_INTFL_BACT ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTFL_BACT_POS))
+#define MXC_F_USB_DEV_INTFL_BRST_POS 3
+#define MXC_F_USB_DEV_INTFL_BRST ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTFL_BRST_POS))
+#define MXC_F_USB_DEV_INTFL_SUSP_POS 4
+#define MXC_F_USB_DEV_INTFL_SUSP ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTFL_SUSP_POS))
+#define MXC_F_USB_DEV_INTFL_NO_VBUS_POS 5
+#define MXC_F_USB_DEV_INTFL_NO_VBUS ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTFL_NO_VBUS_POS))
+#define MXC_F_USB_DEV_INTFL_VBUS_POS 6
+#define MXC_F_USB_DEV_INTFL_VBUS ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTFL_VBUS_POS))
+#define MXC_F_USB_DEV_INTFL_BRST_DN_POS 7
+#define MXC_F_USB_DEV_INTFL_BRST_DN ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTFL_BRST_DN_POS))
+#define MXC_F_USB_DEV_INTFL_SETUP_POS 8
+#define MXC_F_USB_DEV_INTFL_SETUP ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTFL_SETUP_POS))
+#define MXC_F_USB_DEV_INTFL_EP_IN_POS 9
+#define MXC_F_USB_DEV_INTFL_EP_IN ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTFL_EP_IN_POS))
+#define MXC_F_USB_DEV_INTFL_EP_OUT_POS 10
+#define MXC_F_USB_DEV_INTFL_EP_OUT ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTFL_EP_OUT_POS))
+#define MXC_F_USB_DEV_INTFL_EP_NAK_POS 11
+#define MXC_F_USB_DEV_INTFL_EP_NAK ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTFL_EP_NAK_POS))
+#define MXC_F_USB_DEV_INTFL_DMA_ERR_POS 12
+#define MXC_F_USB_DEV_INTFL_DMA_ERR ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTFL_DMA_ERR_POS))
+#define MXC_F_USB_DEV_INTFL_BUF_OVR_POS 13
+#define MXC_F_USB_DEV_INTFL_BUF_OVR ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTFL_BUF_OVR_POS))
+#define MXC_F_USB_DEV_INTFL_VBUS_ST_POS 16
+#define MXC_F_USB_DEV_INTFL_VBUS_ST ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTFL_VBUS_ST_POS))
+
+#define MXC_F_USB_DEV_INTEN_DPACT_POS 0
+#define MXC_F_USB_DEV_INTEN_DPACT ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTEN_DPACT_POS))
+#define MXC_F_USB_DEV_INTEN_RWU_DN_POS 1
+#define MXC_F_USB_DEV_INTEN_RWU_DN ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTEN_RWU_DN_POS))
+#define MXC_F_USB_DEV_INTEN_BACT_POS 2
+#define MXC_F_USB_DEV_INTEN_BACT ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTEN_BACT_POS))
+#define MXC_F_USB_DEV_INTEN_BRST_POS 3
+#define MXC_F_USB_DEV_INTEN_BRST ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTEN_BRST_POS))
+#define MXC_F_USB_DEV_INTEN_SUSP_POS 4
+#define MXC_F_USB_DEV_INTEN_SUSP ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTEN_SUSP_POS))
+#define MXC_F_USB_DEV_INTEN_NO_VBUS_POS 5
+#define MXC_F_USB_DEV_INTEN_NO_VBUS ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTEN_NO_VBUS_POS))
+#define MXC_F_USB_DEV_INTEN_VBUS_POS 6
+#define MXC_F_USB_DEV_INTEN_VBUS ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTEN_VBUS_POS))
+#define MXC_F_USB_DEV_INTEN_BRST_DN_POS 7
+#define MXC_F_USB_DEV_INTEN_BRST_DN ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTEN_BRST_DN_POS))
+#define MXC_F_USB_DEV_INTEN_SETUP_POS 8
+#define MXC_F_USB_DEV_INTEN_SETUP ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTEN_SETUP_POS))
+#define MXC_F_USB_DEV_INTEN_EP_IN_POS 9
+#define MXC_F_USB_DEV_INTEN_EP_IN ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTEN_EP_IN_POS))
+#define MXC_F_USB_DEV_INTEN_EP_OUT_POS 10
+#define MXC_F_USB_DEV_INTEN_EP_OUT ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTEN_EP_OUT_POS))
+#define MXC_F_USB_DEV_INTEN_EP_NAK_POS 11
+#define MXC_F_USB_DEV_INTEN_EP_NAK ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTEN_EP_NAK_POS))
+#define MXC_F_USB_DEV_INTEN_DMA_ERR_POS 12
+#define MXC_F_USB_DEV_INTEN_DMA_ERR ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTEN_DMA_ERR_POS))
+#define MXC_F_USB_DEV_INTEN_BUF_OVR_POS 13
+#define MXC_F_USB_DEV_INTEN_BUF_OVR ((uint32_t)(0x00000001UL << MXC_F_USB_DEV_INTEN_BUF_OVR_POS))
+
+#define MXC_F_USB_EP_BASE_EP_BASE_POS 9
+#define MXC_F_USB_EP_BASE_EP_BASE ((uint32_t)(0x007FFFFFUL << MXC_F_USB_EP_BASE_EP_BASE_POS))
+
+#define MXC_F_USB_CUR_BUF_OUT_BUF_POS 0
+#define MXC_F_USB_CUR_BUF_OUT_BUF ((uint32_t)(0x000000FFUL << MXC_F_USB_CUR_BUF_OUT_BUF_POS))
+#define MXC_F_USB_CUR_BUF_IN_BUF_POS 16
+#define MXC_F_USB_CUR_BUF_IN_BUF ((uint32_t)(0x000000FFUL << MXC_F_USB_CUR_BUF_IN_BUF_POS))
+
+#define MXC_F_USB_IN_OWNER_BUF0_OWNER_POS 0
+#define MXC_F_USB_IN_OWNER_BUF0_OWNER ((uint32_t)(0x000000FFUL << MXC_F_USB_IN_OWNER_BUF0_OWNER_POS))
+#define MXC_F_USB_IN_OWNER_BUF1_OWNER_POS 16
+#define MXC_F_USB_IN_OWNER_BUF1_OWNER ((uint32_t)(0x000000FFUL << MXC_F_USB_IN_OWNER_BUF1_OWNER_POS))
+
+#define MXC_F_USB_OUT_OWNER_BUF0_OWNER_POS 0
+#define MXC_F_USB_OUT_OWNER_BUF0_OWNER ((uint32_t)(0x000000FFUL << MXC_F_USB_OUT_OWNER_BUF0_OWNER_POS))
+#define MXC_F_USB_OUT_OWNER_BUF1_OWNER_POS 16
+#define MXC_F_USB_OUT_OWNER_BUF1_OWNER ((uint32_t)(0x000000FFUL << MXC_F_USB_OUT_OWNER_BUF1_OWNER_POS))
+
+#define MXC_F_USB_IN_INT_INBAV0_POS 0
+#define MXC_F_USB_IN_INT_INBAV0 ((uint32_t)(0x00000001UL << MXC_F_USB_IN_INT_INBAV0_POS))
+#define MXC_F_USB_IN_INT_INBAV1_POS 1
+#define MXC_F_USB_IN_INT_INBAV1 ((uint32_t)(0x00000001UL << MXC_F_USB_IN_INT_INBAV1_POS))
+#define MXC_F_USB_IN_INT_INBAV2_POS 2
+#define MXC_F_USB_IN_INT_INBAV2 ((uint32_t)(0x00000001UL << MXC_F_USB_IN_INT_INBAV2_POS))
+#define MXC_F_USB_IN_INT_INBAV3_POS 3
+#define MXC_F_USB_IN_INT_INBAV3 ((uint32_t)(0x00000001UL << MXC_F_USB_IN_INT_INBAV3_POS))
+#define MXC_F_USB_IN_INT_INBAV4_POS 4
+#define MXC_F_USB_IN_INT_INBAV4 ((uint32_t)(0x00000001UL << MXC_F_USB_IN_INT_INBAV4_POS))
+#define MXC_F_USB_IN_INT_INBAV5_POS 5
+#define MXC_F_USB_IN_INT_INBAV5 ((uint32_t)(0x00000001UL << MXC_F_USB_IN_INT_INBAV5_POS))
+#define MXC_F_USB_IN_INT_INBAV6_POS 6
+#define MXC_F_USB_IN_INT_INBAV6 ((uint32_t)(0x00000001UL << MXC_F_USB_IN_INT_INBAV6_POS))
+#define MXC_F_USB_IN_INT_INBAV7_POS 7
+#define MXC_F_USB_IN_INT_INBAV7 ((uint32_t)(0x00000001UL << MXC_F_USB_IN_INT_INBAV7_POS))
+
+#define MXC_F_USB_OUT_INT_OUTDAV0_POS 0
+#define MXC_F_USB_OUT_INT_OUTDAV0 ((uint32_t)(0x00000001UL << MXC_F_USB_OUT_INT_OUTDAV0_POS))
+#define MXC_F_USB_OUT_INT_OUTDAV1_POS 1
+#define MXC_F_USB_OUT_INT_OUTDAV1 ((uint32_t)(0x00000001UL << MXC_F_USB_OUT_INT_OUTDAV1_POS))
+#define MXC_F_USB_OUT_INT_OUTDAV2_POS 2
+#define MXC_F_USB_OUT_INT_OUTDAV2 ((uint32_t)(0x00000001UL << MXC_F_USB_OUT_INT_OUTDAV2_POS))
+#define MXC_F_USB_OUT_INT_OUTDAV3_POS 3
+#define MXC_F_USB_OUT_INT_OUTDAV3 ((uint32_t)(0x00000001UL << MXC_F_USB_OUT_INT_OUTDAV3_POS))
+#define MXC_F_USB_OUT_INT_OUTDAV4_POS 4
+#define MXC_F_USB_OUT_INT_OUTDAV4 ((uint32_t)(0x00000001UL << MXC_F_USB_OUT_INT_OUTDAV4_POS))
+#define MXC_F_USB_OUT_INT_OUTDAV5_POS 5
+#define MXC_F_USB_OUT_INT_OUTDAV5 ((uint32_t)(0x00000001UL << MXC_F_USB_OUT_INT_OUTDAV5_POS))
+#define MXC_F_USB_OUT_INT_OUTDAV6_POS 6
+#define MXC_F_USB_OUT_INT_OUTDAV6 ((uint32_t)(0x00000001UL << MXC_F_USB_OUT_INT_OUTDAV6_POS))
+#define MXC_F_USB_OUT_INT_OUTDAV7_POS 7
+#define MXC_F_USB_OUT_INT_OUTDAV7 ((uint32_t)(0x00000001UL << MXC_F_USB_OUT_INT_OUTDAV7_POS))
+
+#define MXC_F_USB_NAK_INT_NAK0_POS 0
+#define MXC_F_USB_NAK_INT_NAK0 ((uint32_t)(0x00000001UL << MXC_F_USB_NAK_INT_NAK0_POS))
+#define MXC_F_USB_NAK_INT_NAK1_POS 1
+#define MXC_F_USB_NAK_INT_NAK1 ((uint32_t)(0x00000001UL << MXC_F_USB_NAK_INT_NAK1_POS))
+#define MXC_F_USB_NAK_INT_NAK2_POS 2
+#define MXC_F_USB_NAK_INT_NAK2 ((uint32_t)(0x00000001UL << MXC_F_USB_NAK_INT_NAK2_POS))
+#define MXC_F_USB_NAK_INT_NAK3_POS 3
+#define MXC_F_USB_NAK_INT_NAK3 ((uint32_t)(0x00000001UL << MXC_F_USB_NAK_INT_NAK3_POS))
+#define MXC_F_USB_NAK_INT_NAK4_POS 4
+#define MXC_F_USB_NAK_INT_NAK4 ((uint32_t)(0x00000001UL << MXC_F_USB_NAK_INT_NAK4_POS))
+#define MXC_F_USB_NAK_INT_NAK5_POS 5
+#define MXC_F_USB_NAK_INT_NAK5 ((uint32_t)(0x00000001UL << MXC_F_USB_NAK_INT_NAK5_POS))
+#define MXC_F_USB_NAK_INT_NAK6_POS 6
+#define MXC_F_USB_NAK_INT_NAK6 ((uint32_t)(0x00000001UL << MXC_F_USB_NAK_INT_NAK6_POS))
+#define MXC_F_USB_NAK_INT_NAK7_POS 7
+#define MXC_F_USB_NAK_INT_NAK7 ((uint32_t)(0x00000001UL << MXC_F_USB_NAK_INT_NAK7_POS))
+
+#define MXC_F_USB_DMA_ERR_INT_DMA_ERR0_POS 0
+#define MXC_F_USB_DMA_ERR_INT_DMA_ERR0 ((uint32_t)(0x00000001UL << MXC_F_USB_DMA_ERR_INT_DMA_ERR0_POS))
+#define MXC_F_USB_DMA_ERR_INT_DMA_ERR1_POS 1
+#define MXC_F_USB_DMA_ERR_INT_DMA_ERR1 ((uint32_t)(0x00000001UL << MXC_F_USB_DMA_ERR_INT_DMA_ERR1_POS))
+#define MXC_F_USB_DMA_ERR_INT_DMA_ERR2_POS 2
+#define MXC_F_USB_DMA_ERR_INT_DMA_ERR2 ((uint32_t)(0x00000001UL << MXC_F_USB_DMA_ERR_INT_DMA_ERR2_POS))
+#define MXC_F_USB_DMA_ERR_INT_DMA_ERR3_POS 3
+#define MXC_F_USB_DMA_ERR_INT_DMA_ERR3 ((uint32_t)(0x00000001UL << MXC_F_USB_DMA_ERR_INT_DMA_ERR3_POS))
+#define MXC_F_USB_DMA_ERR_INT_DMA_ERR4_POS 4
+#define MXC_F_USB_DMA_ERR_INT_DMA_ERR4 ((uint32_t)(0x00000001UL << MXC_F_USB_DMA_ERR_INT_DMA_ERR4_POS))
+#define MXC_F_USB_DMA_ERR_INT_DMA_ERR5_POS 5
+#define MXC_F_USB_DMA_ERR_INT_DMA_ERR5 ((uint32_t)(0x00000001UL << MXC_F_USB_DMA_ERR_INT_DMA_ERR5_POS))
+#define MXC_F_USB_DMA_ERR_INT_DMA_ERR6_POS 6
+#define MXC_F_USB_DMA_ERR_INT_DMA_ERR6 ((uint32_t)(0x00000001UL << MXC_F_USB_DMA_ERR_INT_DMA_ERR6_POS))
+#define MXC_F_USB_DMA_ERR_INT_DMA_ERR7_POS 7
+#define MXC_F_USB_DMA_ERR_INT_DMA_ERR7 ((uint32_t)(0x00000001UL << MXC_F_USB_DMA_ERR_INT_DMA_ERR7_POS))
+
+#define MXC_F_USB_BUF_OVR_INT_BUF_OVR0_POS 0
+#define MXC_F_USB_BUF_OVR_INT_BUF_OVR0 ((uint32_t)(0x00000001UL << MXC_F_USB_BUF_OVR_INT_BUF_OVR0_POS))
+#define MXC_F_USB_BUF_OVR_INT_BUF_OVR1_POS 1
+#define MXC_F_USB_BUF_OVR_INT_BUF_OVR1 ((uint32_t)(0x00000001UL << MXC_F_USB_BUF_OVR_INT_BUF_OVR1_POS))
+#define MXC_F_USB_BUF_OVR_INT_BUF_OVR2_POS 2
+#define MXC_F_USB_BUF_OVR_INT_BUF_OVR2 ((uint32_t)(0x00000001UL << MXC_F_USB_BUF_OVR_INT_BUF_OVR2_POS))
+#define MXC_F_USB_BUF_OVR_INT_BUF_OVR3_POS 3
+#define MXC_F_USB_BUF_OVR_INT_BUF_OVR3 ((uint32_t)(0x00000001UL << MXC_F_USB_BUF_OVR_INT_BUF_OVR3_POS))
+#define MXC_F_USB_BUF_OVR_INT_BUF_OVR4_POS 4
+#define MXC_F_USB_BUF_OVR_INT_BUF_OVR4 ((uint32_t)(0x00000001UL << MXC_F_USB_BUF_OVR_INT_BUF_OVR4_POS))
+#define MXC_F_USB_BUF_OVR_INT_BUF_OVR5_POS 5
+#define MXC_F_USB_BUF_OVR_INT_BUF_OVR5 ((uint32_t)(0x00000001UL << MXC_F_USB_BUF_OVR_INT_BUF_OVR5_POS))
+#define MXC_F_USB_BUF_OVR_INT_BUF_OVR6_POS 6
+#define MXC_F_USB_BUF_OVR_INT_BUF_OVR6 ((uint32_t)(0x00000001UL << MXC_F_USB_BUF_OVR_INT_BUF_OVR6_POS))
+#define MXC_F_USB_BUF_OVR_INT_BUF_OVR7_POS 7
+#define MXC_F_USB_BUF_OVR_INT_BUF_OVR7 ((uint32_t)(0x00000001UL << MXC_F_USB_BUF_OVR_INT_BUF_OVR7_POS))
+
+#define MXC_F_USB_SETUP0_BYTE0_POS 0
+#define MXC_F_USB_SETUP0_BYTE0 ((uint32_t)(0x000000FFUL << MXC_F_USB_SETUP0_BYTE0_POS))
+#define MXC_F_USB_SETUP0_BYTE1_POS 8
+#define MXC_F_USB_SETUP0_BYTE1 ((uint32_t)(0x000000FFUL << MXC_F_USB_SETUP0_BYTE1_POS))
+#define MXC_F_USB_SETUP0_BYTE2_POS 16
+#define MXC_F_USB_SETUP0_BYTE2 ((uint32_t)(0x000000FFUL << MXC_F_USB_SETUP0_BYTE2_POS))
+#define MXC_F_USB_SETUP0_BYTE3_POS 24
+#define MXC_F_USB_SETUP0_BYTE3 ((uint32_t)(0x000000FFUL << MXC_F_USB_SETUP0_BYTE3_POS))
+
+#define MXC_F_USB_SETUP1_BYTE4_POS 0
+#define MXC_F_USB_SETUP1_BYTE4 ((uint32_t)(0x000000FFUL << MXC_F_USB_SETUP1_BYTE4_POS))
+#define MXC_F_USB_SETUP1_BYTE5_POS 8
+#define MXC_F_USB_SETUP1_BYTE5 ((uint32_t)(0x000000FFUL << MXC_F_USB_SETUP1_BYTE5_POS))
+#define MXC_F_USB_SETUP1_BYTE6_POS 16
+#define MXC_F_USB_SETUP1_BYTE6 ((uint32_t)(0x000000FFUL << MXC_F_USB_SETUP1_BYTE6_POS))
+#define MXC_F_USB_SETUP1_BYTE7_POS 24
+#define MXC_F_USB_SETUP1_BYTE7 ((uint32_t)(0x000000FFUL << MXC_F_USB_SETUP1_BYTE7_POS))
+
+#define MXC_F_USB_EP0_EP_DIR_POS 0
+#define MXC_F_USB_EP0_EP_DIR ((uint32_t)(0x00000003UL << MXC_F_USB_EP0_EP_DIR_POS))
+#define MXC_F_USB_EP0_EP_BUF2_POS 3
+#define MXC_F_USB_EP0_EP_BUF2 ((uint32_t)(0x00000001UL << MXC_F_USB_EP0_EP_BUF2_POS))
+#define MXC_F_USB_EP0_EP_INT_EN_POS 4
+#define MXC_F_USB_EP0_EP_INT_EN ((uint32_t)(0x00000001UL << MXC_F_USB_EP0_EP_INT_EN_POS))
+#define MXC_F_USB_EP0_EP_NAK_EN_POS 5
+#define MXC_F_USB_EP0_EP_NAK_EN ((uint32_t)(0x00000001UL << MXC_F_USB_EP0_EP_NAK_EN_POS))
+#define MXC_F_USB_EP0_EP_DT_POS 6
+#define MXC_F_USB_EP0_EP_DT ((uint32_t)(0x00000001UL << MXC_F_USB_EP0_EP_DT_POS))
+#define MXC_F_USB_EP0_EP_STALL_POS 8
+#define MXC_F_USB_EP0_EP_STALL ((uint32_t)(0x00000001UL << MXC_F_USB_EP0_EP_STALL_POS))
+#define MXC_F_USB_EP0_EP_ST_STALL_POS 9
+#define MXC_F_USB_EP0_EP_ST_STALL ((uint32_t)(0x00000001UL << MXC_F_USB_EP0_EP_ST_STALL_POS))
+#define MXC_F_USB_EP0_EP_ST_ACK_POS 10
+#define MXC_F_USB_EP0_EP_ST_ACK ((uint32_t)(0x00000001UL << MXC_F_USB_EP0_EP_ST_ACK_POS))
+
+#define MXC_F_USB_EP1_EP_DIR_POS 0
+#define MXC_F_USB_EP1_EP_DIR ((uint32_t)(0x00000003UL << MXC_F_USB_EP1_EP_DIR_POS))
+#define MXC_F_USB_EP1_EP_BUF2_POS 3
+#define MXC_F_USB_EP1_EP_BUF2 ((uint32_t)(0x00000001UL << MXC_F_USB_EP1_EP_BUF2_POS))
+#define MXC_F_USB_EP1_EP_INT_EN_POS 4
+#define MXC_F_USB_EP1_EP_INT_EN ((uint32_t)(0x00000001UL << MXC_F_USB_EP1_EP_INT_EN_POS))
+#define MXC_F_USB_EP1_EP_NAK_EN_POS 5
+#define MXC_F_USB_EP1_EP_NAK_EN ((uint32_t)(0x00000001UL << MXC_F_USB_EP1_EP_NAK_EN_POS))
+#define MXC_F_USB_EP1_EP_DT_POS 6
+#define MXC_F_USB_EP1_EP_DT ((uint32_t)(0x00000001UL << MXC_F_USB_EP1_EP_DT_POS))
+#define MXC_F_USB_EP1_EP_STALL_POS 8
+#define MXC_F_USB_EP1_EP_STALL ((uint32_t)(0x00000001UL << MXC_F_USB_EP1_EP_STALL_POS))
+#define MXC_F_USB_EP1_EP_ST_STALL_POS 9
+#define MXC_F_USB_EP1_EP_ST_STALL ((uint32_t)(0x00000001UL << MXC_F_USB_EP1_EP_ST_STALL_POS))
+#define MXC_F_USB_EP1_EP_ST_ACK_POS 10
+#define MXC_F_USB_EP1_EP_ST_ACK ((uint32_t)(0x00000001UL << MXC_F_USB_EP1_EP_ST_ACK_POS))
+
+#define MXC_F_USB_EP2_EP_DIR_POS 0
+#define MXC_F_USB_EP2_EP_DIR ((uint32_t)(0x00000003UL << MXC_F_USB_EP2_EP_DIR_POS))
+#define MXC_F_USB_EP2_EP_BUF2_POS 3
+#define MXC_F_USB_EP2_EP_BUF2 ((uint32_t)(0x00000001UL << MXC_F_USB_EP2_EP_BUF2_POS))
+#define MXC_F_USB_EP2_EP_INT_EN_POS 4
+#define MXC_F_USB_EP2_EP_INT_EN ((uint32_t)(0x00000001UL << MXC_F_USB_EP2_EP_INT_EN_POS))
+#define MXC_F_USB_EP2_EP_NAK_EN_POS 5
+#define MXC_F_USB_EP2_EP_NAK_EN ((uint32_t)(0x00000001UL << MXC_F_USB_EP2_EP_NAK_EN_POS))
+#define MXC_F_USB_EP2_EP_DT_POS 6
+#define MXC_F_USB_EP2_EP_DT ((uint32_t)(0x00000001UL << MXC_F_USB_EP2_EP_DT_POS))
+#define MXC_F_USB_EP2_EP_STALL_POS 8
+#define MXC_F_USB_EP2_EP_STALL ((uint32_t)(0x00000001UL << MXC_F_USB_EP2_EP_STALL_POS))
+#define MXC_F_USB_EP2_EP_ST_STALL_POS 9
+#define MXC_F_USB_EP2_EP_ST_STALL ((uint32_t)(0x00000001UL << MXC_F_USB_EP2_EP_ST_STALL_POS))
+#define MXC_F_USB_EP2_EP_ST_ACK_POS 10
+#define MXC_F_USB_EP2_EP_ST_ACK ((uint32_t)(0x00000001UL << MXC_F_USB_EP2_EP_ST_ACK_POS))
+
+#define MXC_F_USB_EP3_EP_DIR_POS 0
+#define MXC_F_USB_EP3_EP_DIR ((uint32_t)(0x00000003UL << MXC_F_USB_EP3_EP_DIR_POS))
+#define MXC_F_USB_EP3_EP_BUF2_POS 3
+#define MXC_F_USB_EP3_EP_BUF2 ((uint32_t)(0x00000001UL << MXC_F_USB_EP3_EP_BUF2_POS))
+#define MXC_F_USB_EP3_EP_INT_EN_POS 4
+#define MXC_F_USB_EP3_EP_INT_EN ((uint32_t)(0x00000001UL << MXC_F_USB_EP3_EP_INT_EN_POS))
+#define MXC_F_USB_EP3_EP_NAK_EN_POS 5
+#define MXC_F_USB_EP3_EP_NAK_EN ((uint32_t)(0x00000001UL << MXC_F_USB_EP3_EP_NAK_EN_POS))
+#define MXC_F_USB_EP3_EP_DT_POS 6
+#define MXC_F_USB_EP3_EP_DT ((uint32_t)(0x00000001UL << MXC_F_USB_EP3_EP_DT_POS))
+#define MXC_F_USB_EP3_EP_STALL_POS 8
+#define MXC_F_USB_EP3_EP_STALL ((uint32_t)(0x00000001UL << MXC_F_USB_EP3_EP_STALL_POS))
+#define MXC_F_USB_EP3_EP_ST_STALL_POS 9
+#define MXC_F_USB_EP3_EP_ST_STALL ((uint32_t)(0x00000001UL << MXC_F_USB_EP3_EP_ST_STALL_POS))
+#define MXC_F_USB_EP3_EP_ST_ACK_POS 10
+#define MXC_F_USB_EP3_EP_ST_ACK ((uint32_t)(0x00000001UL << MXC_F_USB_EP3_EP_ST_ACK_POS))
+
+#define MXC_F_USB_EP4_EP_DIR_POS 0
+#define MXC_F_USB_EP4_EP_DIR ((uint32_t)(0x00000003UL << MXC_F_USB_EP4_EP_DIR_POS))
+#define MXC_F_USB_EP4_EP_BUF2_POS 3
+#define MXC_F_USB_EP4_EP_BUF2 ((uint32_t)(0x00000001UL << MXC_F_USB_EP4_EP_BUF2_POS))
+#define MXC_F_USB_EP4_EP_INT_EN_POS 4
+#define MXC_F_USB_EP4_EP_INT_EN ((uint32_t)(0x00000001UL << MXC_F_USB_EP4_EP_INT_EN_POS))
+#define MXC_F_USB_EP4_EP_NAK_EN_POS 5
+#define MXC_F_USB_EP4_EP_NAK_EN ((uint32_t)(0x00000001UL << MXC_F_USB_EP4_EP_NAK_EN_POS))
+#define MXC_F_USB_EP4_EP_DT_POS 6
+#define MXC_F_USB_EP4_EP_DT ((uint32_t)(0x00000001UL << MXC_F_USB_EP4_EP_DT_POS))
+#define MXC_F_USB_EP4_EP_STALL_POS 8
+#define MXC_F_USB_EP4_EP_STALL ((uint32_t)(0x00000001UL << MXC_F_USB_EP4_EP_STALL_POS))
+#define MXC_F_USB_EP4_EP_ST_STALL_POS 9
+#define MXC_F_USB_EP4_EP_ST_STALL ((uint32_t)(0x00000001UL << MXC_F_USB_EP4_EP_ST_STALL_POS))
+#define MXC_F_USB_EP4_EP_ST_ACK_POS 10
+#define MXC_F_USB_EP4_EP_ST_ACK ((uint32_t)(0x00000001UL << MXC_F_USB_EP4_EP_ST_ACK_POS))
+
+#define MXC_F_USB_EP5_EP_DIR_POS 0
+#define MXC_F_USB_EP5_EP_DIR ((uint32_t)(0x00000003UL << MXC_F_USB_EP5_EP_DIR_POS))
+#define MXC_F_USB_EP5_EP_BUF2_POS 3
+#define MXC_F_USB_EP5_EP_BUF2 ((uint32_t)(0x00000001UL << MXC_F_USB_EP5_EP_BUF2_POS))
+#define MXC_F_USB_EP5_EP_INT_EN_POS 4
+#define MXC_F_USB_EP5_EP_INT_EN ((uint32_t)(0x00000001UL << MXC_F_USB_EP5_EP_INT_EN_POS))
+#define MXC_F_USB_EP5_EP_NAK_EN_POS 5
+#define MXC_F_USB_EP5_EP_NAK_EN ((uint32_t)(0x00000001UL << MXC_F_USB_EP5_EP_NAK_EN_POS))
+#define MXC_F_USB_EP5_EP_DT_POS 6
+#define MXC_F_USB_EP5_EP_DT ((uint32_t)(0x00000001UL << MXC_F_USB_EP5_EP_DT_POS))
+#define MXC_F_USB_EP5_EP_STALL_POS 8
+#define MXC_F_USB_EP5_EP_STALL ((uint32_t)(0x00000001UL << MXC_F_USB_EP5_EP_STALL_POS))
+#define MXC_F_USB_EP5_EP_ST_STALL_POS 9
+#define MXC_F_USB_EP5_EP_ST_STALL ((uint32_t)(0x00000001UL << MXC_F_USB_EP5_EP_ST_STALL_POS))
+#define MXC_F_USB_EP5_EP_ST_ACK_POS 10
+#define MXC_F_USB_EP5_EP_ST_ACK ((uint32_t)(0x00000001UL << MXC_F_USB_EP5_EP_ST_ACK_POS))
+
+#define MXC_F_USB_EP6_EP_DIR_POS 0
+#define MXC_F_USB_EP6_EP_DIR ((uint32_t)(0x00000003UL << MXC_F_USB_EP6_EP_DIR_POS))
+#define MXC_F_USB_EP6_EP_BUF2_POS 3
+#define MXC_F_USB_EP6_EP_BUF2 ((uint32_t)(0x00000001UL << MXC_F_USB_EP6_EP_BUF2_POS))
+#define MXC_F_USB_EP6_EP_INT_EN_POS 4
+#define MXC_F_USB_EP6_EP_INT_EN ((uint32_t)(0x00000001UL << MXC_F_USB_EP6_EP_INT_EN_POS))
+#define MXC_F_USB_EP6_EP_NAK_EN_POS 5
+#define MXC_F_USB_EP6_EP_NAK_EN ((uint32_t)(0x00000001UL << MXC_F_USB_EP6_EP_NAK_EN_POS))
+#define MXC_F_USB_EP6_EP_DT_POS 6
+#define MXC_F_USB_EP6_EP_DT ((uint32_t)(0x00000001UL << MXC_F_USB_EP6_EP_DT_POS))
+#define MXC_F_USB_EP6_EP_STALL_POS 8
+#define MXC_F_USB_EP6_EP_STALL ((uint32_t)(0x00000001UL << MXC_F_USB_EP6_EP_STALL_POS))
+#define MXC_F_USB_EP6_EP_ST_STALL_POS 9
+#define MXC_F_USB_EP6_EP_ST_STALL ((uint32_t)(0x00000001UL << MXC_F_USB_EP6_EP_ST_STALL_POS))
+#define MXC_F_USB_EP6_EP_ST_ACK_POS 10
+#define MXC_F_USB_EP6_EP_ST_ACK ((uint32_t)(0x00000001UL << MXC_F_USB_EP6_EP_ST_ACK_POS))
+
+#define MXC_F_USB_EP7_EP_DIR_POS 0
+#define MXC_F_USB_EP7_EP_DIR ((uint32_t)(0x00000003UL << MXC_F_USB_EP7_EP_DIR_POS))
+#define MXC_F_USB_EP7_EP_BUF2_POS 3
+#define MXC_F_USB_EP7_EP_BUF2 ((uint32_t)(0x00000001UL << MXC_F_USB_EP7_EP_BUF2_POS))
+#define MXC_F_USB_EP7_EP_INT_EN_POS 4
+#define MXC_F_USB_EP7_EP_INT_EN ((uint32_t)(0x00000001UL << MXC_F_USB_EP7_EP_INT_EN_POS))
+#define MXC_F_USB_EP7_EP_NAK_EN_POS 5
+#define MXC_F_USB_EP7_EP_NAK_EN ((uint32_t)(0x00000001UL << MXC_F_USB_EP7_EP_NAK_EN_POS))
+#define MXC_F_USB_EP7_EP_DT_POS 6
+#define MXC_F_USB_EP7_EP_DT ((uint32_t)(0x00000001UL << MXC_F_USB_EP7_EP_DT_POS))
+#define MXC_F_USB_EP7_EP_STALL_POS 8
+#define MXC_F_USB_EP7_EP_STALL ((uint32_t)(0x00000001UL << MXC_F_USB_EP7_EP_STALL_POS))
+#define MXC_F_USB_EP7_EP_ST_STALL_POS 9
+#define MXC_F_USB_EP7_EP_ST_STALL ((uint32_t)(0x00000001UL << MXC_F_USB_EP7_EP_ST_STALL_POS))
+#define MXC_F_USB_EP7_EP_ST_ACK_POS 10
+#define MXC_F_USB_EP7_EP_ST_ACK ((uint32_t)(0x00000001UL << MXC_F_USB_EP7_EP_ST_ACK_POS))
+
+#define MXC_F_USB_EP_DIR_POS (0)
+#define MXC_F_USB_EP_DIR ((uint32_t)(0x00000003UL << MXC_F_USB_EP_DIR_POS))
+
+#define MXC_V_USB_EP_DIR_DISABLE ((uint32_t)0x00000000UL)
+#define MXC_V_USB_EP_DIR_OUT ((uint32_t)0x00000001UL)
+#define MXC_V_USB_EP_DIR_IN ((uint32_t)0x00000002UL)
+#define MXC_V_USB_EP_DIR_CONTROL ((uint32_t)0x00000003UL)
+
+#define MXC_S_USB_EP_DIR_DISABLE (MXC_V_USB_EP_DIR_DISABLE << MXC_F_USB_EP_DIR_POS)
+#define MXC_S_USB_EP_DIR_OUT (MXC_V_USB_EP_DIR_OUT << MXC_F_USB_EP_DIR_POS)
+#define MXC_S_USB_EP_DIR_IN (MXC_V_USB_EP_DIR_IN << MXC_F_USB_EP_DIR_POS)
+#define MXC_S_USB_EP_DIR_CONTROL (MXC_V_USB_EP_DIR_CONTROL << MXC_F_USB_EP_DIR_POS)
+
+#define MXC_F_USB_EP_BUF2_POS (3)
+#define MXC_F_USB_EP_BUF2 ((uint32_t)(0x00000001UL << MXC_F_USB_EP_BUF2_POS))
+#define MXC_F_USB_EP_INTEN_POS (4)
+#define MXC_F_USB_EP_INT_EN ((uint32_t)(0x00000001UL << MXC_F_USB_EP_INTEN_POS))
+#define MXC_F_USB_EP_NAK_EN_POS (5)
+#define MXC_F_USB_EP_NAK_EN ((uint32_t)(0x00000001UL << MXC_F_USB_EP_NAK_EN_POS))
+#define MXC_F_USB_EP_DT_POS (6)
+#define MXC_F_USB_EP_DT ((uint32_t)(0x00000001UL << MXC_F_USB_EP_DT_POS))
+#define MXC_F_USB_EP_STALL_POS (8)
+#define MXC_F_USB_EP_STALL ((uint32_t)(0x00000001UL << MXC_F_USB_EP_STALL_POS))
+#define MXC_F_USB_EP_ST_STALL_POS (9)
+#define MXC_F_USB_EP_ST_STALL ((uint32_t)(0x00000001UL << MXC_F_USB_EP_ST_STALL_POS))
+#define MXC_F_USB_EP_ST_ACK_POS (10)
+#define MXC_F_USB_EP_ST_ACK ((uint32_t)(0x00000001UL << MXC_F_USB_EP_ST_ACK_POS))
+
+#ifdef __cplusplus
+}
+#endif
+
+/**
+* @}
+*/
+
+#endif /* _MXC_USB_REGS_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32600MBED/wdt_regs.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,150 @@
+/*******************************************************************************
+ * Copyright (C) 2015 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */
+
+#ifndef _MXC_WDT_REGS_H_
+#define _MXC_WDT_REGS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/**
+ * @file wdt_regs.h
+ * @addtogroup wdt WDT
+ * @{
+ */
+
+/**
+ * @brief Defines watchdog timer periods
+ */
+typedef enum {
+ /** 2^31 cycle period */
+ MXC_E_WDT_PERIOD_2_31_CLKS = 0,
+ /** 2^30 cycle period */
+ MXC_E_WDT_PERIOD_2_30_CLKS,
+ /** 2^29 cycle period */
+ MXC_E_WDT_PERIOD_2_29_CLKS,
+ /** 2^28 cycle period */
+ MXC_E_WDT_PERIOD_2_28_CLKS,
+ /** 2^27 cycle period */
+ MXC_E_WDT_PERIOD_2_27_CLKS,
+ /** 2^26 cycle period */
+ MXC_E_WDT_PERIOD_2_26_CLKS,
+ /** 2^25 cycle period */
+ MXC_E_WDT_PERIOD_2_25_CLKS,
+ /** 2^24 cycle period */
+ MXC_E_WDT_PERIOD_2_24_CLKS,
+ /** 2^23 cycle period */
+ MXC_E_WDT_PERIOD_2_23_CLKS,
+ /** 2^22 cycle period */
+ MXC_E_WDT_PERIOD_2_22_CLKS,
+ /** 2^21 cycle period */
+ MXC_E_WDT_PERIOD_2_21_CLKS,
+ /** 2^20 cycle period */
+ MXC_E_WDT_PERIOD_2_20_CLKS,
+ /** 2^19 cycle period */
+ MXC_E_WDT_PERIOD_2_19_CLKS,
+ /** 2^18 cycle period */
+ MXC_E_WDT_PERIOD_2_18_CLKS,
+ /** 2^17 cycle period */
+ MXC_E_WDT_PERIOD_2_17_CLKS,
+ /** 2^16 cycle period */
+ MXC_E_WDT_PERIOD_2_16_CLKS,
+} mxc_wdt_period_t;
+
+/* Offset Register Description
+ ====== ================================================ */
+typedef struct {
+ __IO uint32_t ctrl; /* 0x0000 Watchdog Timer Control Register */
+ __IO uint32_t clear; /* 0x0004 Watchdog Clear Register (Feed Dog) */
+ __IO uint32_t int_rst_fl; /* 0x0008 Watchdog Interrupt/Reset Flags */
+ __IO uint32_t int_rst_en; /* 0x000C Interrupt/Reset Enable/Disable Controls */
+ __I uint32_t rsv0010; /* 0x0010 */
+ __IO uint32_t lock_ctrl; /* 0x0014 Lock Register Setting for WDT CTRL */
+} mxc_wdt_regs_t;
+
+/*
+ Register offsets for module WDT.
+*/
+#define MXC_R_WDT_OFFS_CTRL ((uint32_t)0x00000000UL)
+#define MXC_R_WDT_OFFS_CLEAR ((uint32_t)0x00000004UL)
+#define MXC_R_WDT_OFFS_INT_RST_FL ((uint32_t)0x00000008UL)
+#define MXC_R_WDT_OFFS_INT_RST_EN ((uint32_t)0x0000000CUL)
+#define MXC_R_WDT_OFFS_LOCK_CTRL ((uint32_t)0x00000014UL)
+
+#define MXC_V_WDT_WDLOCK_LOCK_KEY ((uint8_t)0x24)
+#define MXC_V_WDT_WDLOCK_UNLOCK_KEY ((uint8_t)0x42)
+
+
+/*
+ Field positions and masks for module WDT.
+*/
+#define MXC_F_WDT_CTRL_INT_PERIOD_POS 0
+#define MXC_F_WDT_CTRL_INT_PERIOD ((uint32_t)(0x0000000FUL << MXC_F_WDT_CTRL_INT_PERIOD_POS))
+#define MXC_F_WDT_CTRL_RST_PERIOD_POS 4
+#define MXC_F_WDT_CTRL_RST_PERIOD ((uint32_t)(0x0000000FUL << MXC_F_WDT_CTRL_RST_PERIOD_POS))
+#define MXC_F_WDT_CTRL_EN_TIMER_POS 8
+#define MXC_F_WDT_CTRL_EN_TIMER ((uint32_t)(0x00000001UL << MXC_F_WDT_CTRL_EN_TIMER_POS))
+#define MXC_F_WDT_CTRL_EN_CLOCK_POS 9
+#define MXC_F_WDT_CTRL_EN_CLOCK ((uint32_t)(0x00000001UL << MXC_F_WDT_CTRL_EN_CLOCK_POS))
+#define MXC_F_WDT_CTRL_WAIT_PERIOD_POS 12
+#define MXC_F_WDT_CTRL_WAIT_PERIOD ((uint32_t)(0x0000000FUL << MXC_F_WDT_CTRL_WAIT_PERIOD_POS))
+
+#define MXC_F_WDT_FLAGS_TIMEOUT_POS 0
+#define MXC_F_WDT_FLAGS_TIMEOUT ((uint32_t)(0x00000001UL << MXC_F_WDT_FLAGS_TIMEOUT_POS))
+#define MXC_F_WDT_FLAGS_PRE_WIN_POS 1
+#define MXC_F_WDT_FLAGS_PRE_WIN ((uint32_t)(0x00000001UL << MXC_F_WDT_FLAGS_PRE_WIN_POS))
+#define MXC_F_WDT_FLAGS_RESET_OUT_POS 2
+#define MXC_F_WDT_FLAGS_RESET_OUT ((uint32_t)(0x00000001UL << MXC_F_WDT_FLAGS_RESET_OUT_POS))
+
+#define MXC_F_WDT_ENABLE_TIMEOUT_POS 0
+#define MXC_F_WDT_ENABLE_TIMEOUT ((uint32_t)(0x00000001UL << MXC_F_WDT_ENABLE_TIMEOUT_POS))
+#define MXC_F_WDT_ENABLE_PRE_WIN_POS 1
+#define MXC_F_WDT_ENABLE_PRE_WIN ((uint32_t)(0x00000001UL << MXC_F_WDT_ENABLE_PRE_WIN_POS))
+#define MXC_F_WDT_ENABLE_RESET_OUT_POS 2
+#define MXC_F_WDT_ENABLE_RESET_OUT ((uint32_t)(0x00000001UL << MXC_F_WDT_ENABLE_RESET_OUT_POS))
+
+#define MXC_F_WDT_LOCK_CTRL_WDLOCK_POS 0
+#define MXC_F_WDT_LOCK_CTRL_WDLOCK ((uint32_t)(0x000000FFUL << MXC_F_WDT_LOCK_CTRL_WDLOCK_POS))
+
+#ifdef __cplusplus
+}
+#endif
+
+/**
+* @}
+*/
+
+#endif /* _MXC_WDT_REGS_H_ */
Binary file TARGET_MAXWSNENV/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_MAXWSNENV/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_MAXWSNENV/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_MAXWSNENV/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_MAXWSNENV/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_MAXWSNENV/TOOLCHAIN_ARM_STD/system_max32610.o has changed
Binary file TARGET_MAXWSNENV/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_MAXWSNENV/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_MAXWSNENV/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_MAXWSNENV/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_MAXWSNENV/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_MAXWSNENV/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_MAXWSNENV/TOOLCHAIN_IAR/startup_MAX32610.o has changed
Binary file TARGET_MAXWSNENV/TOOLCHAIN_IAR/system_max32610.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_MTS_DRAGONFLY_F411RE/TARGET_STM/TARGET_STM32F4/PeripheralPins.h Tue Jun 09 14:29:26 2015 +0100 @@ -0,0 +1,66 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_PERIPHERALPINS_H +#define MBED_PERIPHERALPINS_H + +#include "pinmap.h" +#include "PeripheralNames.h" + +//*** ADC *** + +extern const PinMap PinMap_ADC[]; + +//*** DAC *** + +extern const PinMap PinMap_DAC[]; + +//*** I2C *** + +extern const PinMap PinMap_I2C_SDA[]; +extern const PinMap PinMap_I2C_SCL[]; + +//*** PWM *** + +extern const PinMap PinMap_PWM[]; + +//*** SERIAL *** + +extern const PinMap PinMap_UART_TX[]; +extern const PinMap PinMap_UART_RX[]; + +//*** SPI *** + +extern const PinMap PinMap_SPI_MOSI[]; +extern const PinMap PinMap_SPI_MISO[]; +extern const PinMap PinMap_SPI_SCLK[]; +extern const PinMap PinMap_SPI_SSEL[]; + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/TARGET_STM/TARGET_STM32F4/TARGET_MTS_DRAGONFLY_F411RE/PeripheralNames.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,82 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE
+} ADCName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE,
+ UART_6 = (int)USART6_BASE
+} UARTName;
+
+#define STDIO_UART_TX PB_6
+#define STDIO_UART_RX PB_7
+#define STDIO_UART UART_1
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE,
+ SPI_3 = (int)SPI3_BASE,
+ SPI_4 = (int)SPI4_BASE,
+ SPI_5 = (int)SPI5_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE,
+ I2C_3 = (int)I2C3_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_2 = (int)TIM2_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_4 = (int)TIM4_BASE,
+ PWM_5 = (int)TIM5_BASE,
+ PWM_9 = (int)TIM9_BASE,
+ PWM_10 = (int)TIM10_BASE,
+ PWM_11 = (int)TIM11_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/TARGET_STM/TARGET_STM32F4/TARGET_MTS_DRAGONFLY_F411RE/PinNames.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,198 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
+#define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((INVERTED & 0x01) << 15) | ((CHANNEL & 0x0F) << 11) | ((AFNUM & 0x0F) << 7) | ((PUPD & 0x07) << 4) | ((MODE & 0x0F) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x0F)
+#define STM_PIN_INVERTED(X) (((X) >> 15) & 0x01)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_2 = 0x32,
+
+ PH_0 = 0x70,
+ PH_1 = 0x71,
+
+ // Arduino connector namings
+ A0 = PA_0,
+ A1 = PA_1,
+ A2 = PC_4,
+ A3 = PB_0,
+ A4 = PC_1,
+ A5 = PC_0,
+ D0 = PA_3,
+ D1 = PA_2,
+ D2 = PC_9,
+ D3 = PB_15,
+ D4 = PA_8,
+ D5 = PA_7,
+ D6 = PB_13,
+ D7 = PC_2,
+ D8 = PA_9,
+ D9 = PB_1,
+ D10 = PC_8,
+ D11 = PB_5,
+ D12 = PA_6,
+ D13 = PA_5,
+ D14 = PB_9,
+ D15 = PB_8,
+
+ // Generic signals namings
+ LED1 = D3,
+ LED2 = D3,
+ LED3 = D3,
+ LED4 = D3,
+ SERIAL_TX = D1,
+ SERIAL_RX = D0,
+ SERIAL_RTS = A1,
+ SERIAL_CTS = A0,
+ SERIAL_DCD = D5,
+ SERIAL_DSR = D8,
+ SERIAL_DTR = D4,
+ SERIAL_RI = D9,
+ USBTX = PB_6,
+ USBRX = PB_7,
+ RADIO_TX = PC_7,
+ RADIO_RX = PC_6,
+ RADIO_RTS = PB_10,
+ RADIO_CTS = PB_12,
+ RADIO_DCD = D5,
+ RADIO_DSR = D8,
+ RADIO_DTR = D4,
+ RADIO_RI = D9,
+ I2C_SCL = D15,
+ I2C_SDA = D14,
+ SPI_MOSI = PC_12,
+ SPI_MISO = PC_11,
+ SPI_SCK = PC_10,
+ SPI_CS1 = PA_4,
+ SPI_CS2 = PB_14,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/TARGET_STM/TARGET_STM32F4/TARGET_MTS_DRAGONFLY_F411RE/PortNames.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,49 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortE = 4,
+ PortH = 7
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_MTS_DRAGONFLY_F411RE/TARGET_STM/TARGET_STM32F4/TARGET_MTS_DRAGONFLY_F411RE/device.h Tue Jun 09 14:29:26 2015 +0100 @@ -0,0 +1,70 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 // Not present on this device + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/TARGET_STM/TARGET_STM32F4/TARGET_MTS_DRAGONFLY_F411RE/objects.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,108 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+ uint8_t channel;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index; // Used by irq
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+ uint32_t slave;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t period;
+ uint32_t pulse;
+ uint8_t channel;
+ uint8_t inverted;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/TARGET_STM/TARGET_STM32F4/gpio_object.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,74 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_GPIO_OBJECT_H
+#define MBED_GPIO_OBJECT_H
+
+#include "mbed_assert.h"
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ uint32_t mask;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_set_clr;
+} gpio_t;
+
+static inline void gpio_write(gpio_t *obj, int value)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ if (value) {
+ *obj->reg_set_clr = obj->mask;
+ } else {
+ *obj->reg_set_clr = obj->mask << 16;
+ }
+}
+
+static inline int gpio_read(gpio_t *obj)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ return ((*obj->reg_in & obj->mask) ? 1 : 0);
+}
+
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/startup_stm32f411xe.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f411re.sct Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,47 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2014, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32F411RE: 512 KB FLASH (0x80000) + 128 KB SRAM (0x20000)
+; FIRST 64 KB FLASH FOR BOOTLOADER
+; REST 448 KB FLASH FOR APPLICATION
+LR_IROM1 0x08010000 0x70000 { ; load region size_region
+
+ ER_IROM1 0x08010000 0x70000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; Total: 102 vectors = 408 bytes (0x198) to be reserved in RAM
+ RW_IRAM1 (0x20000000+0x198) (0x20000-0x198) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+}
+
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_adc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_can.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cec.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_crc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dac.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dcmi_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_eth.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_fmpi2c.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_fmpi2c_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hash.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_irda.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_msp_template.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_nand.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_nor.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_qspi.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rng.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sai.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sai_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sd.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_spdifrx.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_spi.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sram.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_tim.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_uart.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_usart.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_usb.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_MICRO/system_stm32f4xx.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/startup_stm32f411xe.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f411re.sct Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,47 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2014, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32F411RE: 512 KB FLASH (0x80000) + 128 KB SRAM (0x20000)
+; FIRST 64 KB FLASH FOR BOOTLOADER
+; REST 448 KB FLASH FOR APPLICATION
+LR_IROM1 0x08010000 0x70000 { ; load region size_region
+
+ ER_IROM1 0x08010000 0x70000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; Total: 102 vectors = 408 bytes (0x198) to be reserved in RAM
+ RW_IRAM1 (0x20000000+0x198) (0x20000-0x198) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+}
+
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_can.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cec.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_crc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dcmi_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_eth.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_fmpi2c.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_fmpi2c_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_irda.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_msp_template.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nand.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nor.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_qspi.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rng.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sai.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sai_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sd.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_spdifrx.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_spi.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sram.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_uart.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_usart.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_usb.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_ARM_STD/system_stm32f4xx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/NUCLEO_F411RE.ld Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,153 @@
+/* Linker script for STM32F411 */
+
+/* Linker script to configure memory regions. */
+MEMORY
+{
+ /* First 64kB of flash reserved for bootloader */
+ /* Other 448kB for application */
+ FLASH (rx) : ORIGIN = 0x08010000, LENGTH = 448K
+/* CCM (rwx) : ORIGIN = 0x10000000, LENGTH = 64K */
+ RAM (rwx) : ORIGIN = 0x20000198, LENGTH = 128k - 0x198
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.isr_vector))
+ *(.text*)
+
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ KEEP(*(.jcr*))
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+
+ } > RAM
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start__ = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ } > RAM
+
+ .heap (COPY):
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy (COPY):
+ {
+ *(.stack*)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
+
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/hal_tick.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/startup_STM32F41x.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_adc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_can.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_cec.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_crc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dac.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dcmi_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dma.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_eth.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_flash.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_fmpi2c.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_fmpi2c_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_hash.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_irda.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_msp_template.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_nand.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_nor.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_qspi.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rng.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_sai.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_sai_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_sd.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_spdifrx.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_spi.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_sram.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_tim.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_uart.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_usart.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_ll_usb.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_GCC_ARM/system_stm32f4xx.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/startup_stm32f411xe.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f411xe.icf Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,32 @@
+/* [ROM = 512kb = 0x80000] */
+define symbol __intvec_start__ = 0x08010000;
+define symbol __region_ROM_start__ = 0x08010000;
+define symbol __region_ROM_end__ = 0x0807FFFF;
+
+/* [RAM = 128kb = 0x20000] Vector table dynamic copy: 102 vectors = 408 bytes (0x198) to be reserved in RAM */
+define symbol __NVIC_start__ = 0x20000000;
+define symbol __NVIC_end__ = 0x20000197; /* Aligned on 8 bytes */
+define symbol __region_RAM_start__ = 0x20000198;
+define symbol __region_RAM_end__ = 0x2001FFFF;
+
+/* Memory regions */
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __region_ROM_start__ to __region_ROM_end__];
+define region RAM_region = mem:[from __region_RAM_start__ to __region_RAM_end__];
+
+/* Stack and Heap */
+/* Stack: 4kB - 408B for vector table */
+/* Heap: 96kB */
+define symbol __size_cstack__ = 0xe68;
+define symbol __size_heap__ = 0x18000;
+define block CSTACK with alignment = 8, size = __size_cstack__ { };
+define block HEAP with alignment = 8, size = __size_heap__ { };
+define block STACKHEAP with fixed order { block HEAP, block CSTACK };
+
+initialize by copy with packing = zeros { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite, block STACKHEAP };
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_adc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_can.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_cec.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_crc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dac.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dcmi_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dma.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_eth.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_flash.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_fmpi2c.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_fmpi2c_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_hash.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_irda.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_msp_template.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_nand.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_nor.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_qspi.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_rng.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_sai.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_sai_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_sd.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_spdifrx.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_spi.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_sram.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_tim.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_uart.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_usart.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/stm32f4xx_ll_usb.o has changed
Binary file TARGET_MTS_DRAGONFLY_F411RE/TOOLCHAIN_IAR/system_stm32f4xx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_MTS_DRAGONFLY_F411RE/cmsis.h Tue Jun 09 14:29:26 2015 +0100 @@ -0,0 +1,38 @@ +/* mbed Microcontroller Library + * A generic CMSIS include header + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_CMSIS_H +#define MBED_CMSIS_H + +#include "stm32f4xx.h" +#include "cmsis_nvic.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/cmsis_nvic.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,55 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+// STM32F411RE
+// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F
+// MCU Peripherals: 86 vectors = 344 bytes from 0x40 to 0x197
+// Total: 102 vectors = 408 bytes (0x198) to be reserved in RAM
+#define NVIC_NUM_VECTORS 102
+#define NVIC_USER_IRQ_OFFSET 16
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
+uint32_t NVIC_GetVector(IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/core_ca9.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,271 @@
+/**************************************************************************//**
+ * @file core_ca9.h
+ * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File
+ * @version
+ * @date 25 March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CA9_H_GENERIC
+#define __CORE_CA9_H_GENERIC
+
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_A9
+ @{
+ */
+
+/* CMSIS CA9 definitions */
+#define __CA9_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CA9_CMSIS_VERSION_SUB (0x10) /*!< [15:0] CMSIS HAL sub version */
+#define __CA9_CMSIS_VERSION ((__CA9_CMSIS_VERSION_MAIN << 16) | \
+ __CA9_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_A (0x09) /*!< Cortex-A Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /*!< standard types definitions */
+#include "core_caInstr.h" /*!< Core Instruction Access */
+#include "core_caFunc.h" /*!< Core Function Access */
+#include "core_cm4_simd.h" /*!< Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CA9_H_DEPENDANT
+#define __CORE_CA9_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CA9_REV
+ #define __CA9_REV 0x0000
+ #warning "__CA9_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 1
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 1
+ #endif
+
+ #if __Vendor_SysTickConfig == 0
+ #error "__Vendor_SysTickConfig set to 0, but vendor systick timer must be supplied for Cortex-A9"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_A9 */
+
+
+/*******************************************************************************
+ * Register Abstraction
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-A processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t reserved1:7; /*!< bit: 20..23 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/*@} end of group CMSIS_CORE */
+
+/*@} end of CMSIS_Core_FPUFunctions */
+
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/core_caFunc.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,1161 @@
+/**************************************************************************//**
+ * @file core_caFunc.h
+ * @brief CMSIS Cortex-A Core Function Access Header File
+ * @version V3.10
+ * @date 9 May 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CAFUNC_H__
+#define __CORE_CAFUNC_H__
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get CPSR Register
+
+ This function returns the content of the CPSR Register.
+
+ \return CPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_CPSR(void)
+{
+ register uint32_t __regCPSR __ASM("cpsr");
+ return(__regCPSR);
+}
+
+/** \brief Set Stack Pointer
+
+ This function assigns the given value to the current stack pointer.
+
+ \param [in] topOfStack Stack Pointer value to set
+ */
+register uint32_t __regSP __ASM("sp");
+__STATIC_INLINE void __set_SP(uint32_t topOfStack)
+{
+ __regSP = topOfStack;
+}
+
+
+/** \brief Get link register
+
+ This function returns the value of the link register
+
+ \return Value of link register
+ */
+register uint32_t __reglr __ASM("lr");
+__STATIC_INLINE uint32_t __get_LR(void)
+{
+ return(__reglr);
+}
+
+/** \brief Set link register
+
+ This function sets the value of the link register
+
+ \param [in] lr LR value to set
+ */
+__STATIC_INLINE void __set_LR(uint32_t lr)
+{
+ __reglr = lr;
+}
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_PSP(uint32_t topOfProcStack)
+{
+ ARM
+ PRESERVE8
+
+ BIC R0, R0, #7 ;ensure stack is 8-byte aligned
+ MRS R1, CPSR
+ CPS #MODE_SYS ;no effect in USR mode
+ MOV SP, R0
+ MSR CPSR_c, R1 ;no effect in USR mode
+ ISB
+ BX LR
+
+}
+
+/** \brief Set User Mode
+
+ This function changes the processor state to User Mode
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_CPS_USR(void)
+{
+ ARM
+
+ CPS #MODE_USR
+ BX LR
+}
+
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+/** \brief Get FPEXC
+
+ This function returns the current value of the Floating Point Exception Control register.
+
+ \return Floating Point Exception Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPEXC(void)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ return(__regfpexc);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPEXC
+
+ This function assigns the given value to the Floating Point Exception Control register.
+
+ \param [in] fpscr Floating Point Exception Control value to set
+ */
+__STATIC_INLINE void __set_FPEXC(uint32_t fpexc)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ __regfpexc = (fpexc);
+#endif
+}
+
+/** \brief Get CPACR
+
+ This function returns the current value of the Coprocessor Access Control register.
+
+ \return Coprocessor Access Control register value
+ */
+__STATIC_INLINE uint32_t __get_CPACR(void)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ return __regCPACR;
+}
+
+/** \brief Set CPACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] cpacr Coporcessor Acccess Control value to set
+ */
+__STATIC_INLINE void __set_CPACR(uint32_t cpacr)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ __regCPACR = cpacr;
+ __ISB();
+}
+
+/** \brief Get CBAR
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Configuration Base Address register value
+ */
+__STATIC_INLINE uint32_t __get_CBAR() {
+ register uint32_t __regCBAR __ASM("cp15:4:c15:c0:0");
+ return(__regCBAR);
+}
+
+/** \brief Get TTBR0
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Translation Table Base Register 0 value
+ */
+__STATIC_INLINE uint32_t __get_TTBR0() {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ return(__regTTBR0);
+}
+
+/** \brief Set TTBR0
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] ttbr0 Translation Table Base Register 0 value to set
+ */
+__STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ __regTTBR0 = ttbr0;
+ __ISB();
+}
+
+/** \brief Get DACR
+
+ This function returns the value of the Domain Access Control Register.
+
+ \return Domain Access Control Register value
+ */
+__STATIC_INLINE uint32_t __get_DACR() {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ return(__regDACR);
+}
+
+/** \brief Set DACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] dacr Domain Access Control Register value to set
+ */
+__STATIC_INLINE void __set_DACR(uint32_t dacr) {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ __regDACR = dacr;
+ __ISB();
+}
+
+/******************************** Cache and BTAC enable ****************************************************/
+
+/** \brief Set SCTLR
+
+ This function assigns the given value to the System Control Register.
+
+ \param [in] sctlr System Control Register, value to set
+ */
+__STATIC_INLINE void __set_SCTLR(uint32_t sctlr)
+{
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ __regSCTLR = sctlr;
+}
+
+/** \brief Get SCTLR
+
+ This function returns the value of the System Control Register.
+
+ \return System Control Register value
+ */
+__STATIC_INLINE uint32_t __get_SCTLR() {
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ return(__regSCTLR);
+}
+
+/** \brief Enable Caches
+
+ Enable Caches
+ */
+__STATIC_INLINE void __enable_caches(void) {
+ // Set I bit 12 to enable I Cache
+ // Set C bit 2 to enable D Cache
+ __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief Disable Caches
+
+ Disable Caches
+ */
+__STATIC_INLINE void __disable_caches(void) {
+ // Clear I bit 12 to disable I Cache
+ // Clear C bit 2 to disable D Cache
+ __set_SCTLR( __get_SCTLR() & ~(1 << 12) & ~(1 << 2));
+ __ISB();
+}
+
+/** \brief Enable BTAC
+
+ Enable BTAC
+ */
+__STATIC_INLINE void __enable_btac(void) {
+ // Set Z bit 11 to enable branch prediction
+ __set_SCTLR( __get_SCTLR() | (1 << 11));
+ __ISB();
+}
+
+/** \brief Disable BTAC
+
+ Disable BTAC
+ */
+__STATIC_INLINE void __disable_btac(void) {
+ // Clear Z bit 11 to disable branch prediction
+ __set_SCTLR( __get_SCTLR() & ~(1 << 11));
+}
+
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __enable_mmu(void) {
+ // Set M bit 0 to enable the MMU
+ // Set AFE bit to enable simplified access permissions model
+ // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+ __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+ __ISB();
+}
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __disable_mmu(void) {
+ // Clear M bit 0 to disable the MMU
+ __set_SCTLR( __get_SCTLR() & ~1);
+ __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief Invalidate the whole tlb
+
+ TLBIALL. Invalidate the whole tlb
+ */
+
+__STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+ register uint32_t __TLBIALL __ASM("cp15:0:c8:c7:0");
+ __TLBIALL = 0;
+ __DSB();
+ __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief Invalidate entire branch predictor array
+
+ BPIALL. Branch Predictor Invalidate All.
+ */
+
+__STATIC_INLINE void __v7_inv_btac(void) {
+ register uint32_t __BPIALL __ASM("cp15:0:c7:c5:6");
+ __BPIALL = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief Invalidate the whole I$
+
+ ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+__STATIC_INLINE void __v7_inv_icache_all(void) {
+ register uint32_t __ICIALLU __ASM("cp15:0:c7:c5:0");
+ __ICIALLU = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new I cache state
+}
+
+/** \brief Clean D$ by MVA
+
+ DCCMVAC. Data cache clean by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_dcache_mva(void *va) {
+ register uint32_t __DCCMVAC __ASM("cp15:0:c7:c10:1");
+ __DCCMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Invalidate D$ by MVA
+
+ DCIMVAC. Data cache invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_inv_dcache_mva(void *va) {
+ register uint32_t __DCIMVAC __ASM("cp15:0:c7:c6:1");
+ __DCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Clean and Invalidate D$ by MVA
+
+ DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+ register uint32_t __DCCIMVAC __ASM("cp15:0:c7:c14:1");
+ __DCCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief
+ * Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency.
+ */
+#pragma push
+#pragma arm
+__STATIC_ASM void __v7_all_cache(uint32_t op) {
+ ARM
+
+ PUSH {R4-R11}
+
+ MRC p15, 1, R6, c0, c0, 1 // Read CLIDR
+ ANDS R3, R6, #0x07000000 // Extract coherency level
+ MOV R3, R3, LSR #23 // Total cache levels << 1
+ BEQ Finished // If 0, no need to clean
+
+ MOV R10, #0 // R10 holds current cache level << 1
+Loop1 ADD R2, R10, R10, LSR #1 // R2 holds cache "Set" position
+ MOV R1, R6, LSR R2 // Bottom 3 bits are the Cache-type for this level
+ AND R1, R1, #7 // Isolate those lower 3 bits
+ CMP R1, #2
+ BLT Skip // No cache or only instruction cache at this level
+
+ MCR p15, 2, R10, c0, c0, 0 // Write the Cache Size selection register
+ ISB // ISB to sync the change to the CacheSizeID reg
+ MRC p15, 1, R1, c0, c0, 0 // Reads current Cache Size ID register
+ AND R2, R1, #7 // Extract the line length field
+ ADD R2, R2, #4 // Add 4 for the line length offset (log2 16 bytes)
+ LDR R4, =0x3FF
+ ANDS R4, R4, R1, LSR #3 // R4 is the max number on the way size (right aligned)
+ CLZ R5, R4 // R5 is the bit position of the way size increment
+ LDR R7, =0x7FFF
+ ANDS R7, R7, R1, LSR #13 // R7 is the max number of the index size (right aligned)
+
+Loop2 MOV R9, R4 // R9 working copy of the max way size (right aligned)
+
+Loop3 ORR R11, R10, R9, LSL R5 // Factor in the Way number and cache number into R11
+ ORR R11, R11, R7, LSL R2 // Factor in the Set number
+ CMP R0, #0
+ BNE Dccsw
+ MCR p15, 0, R11, c7, c6, 2 // DCISW. Invalidate by Set/Way
+ B cont
+Dccsw CMP R0, #1
+ BNE Dccisw
+ MCR p15, 0, R11, c7, c10, 2 // DCCSW. Clean by Set/Way
+ B cont
+Dccisw MCR p15, 0, R11, c7, c14, 2 // DCCISW, Clean and Invalidate by Set/Way
+cont SUBS R9, R9, #1 // Decrement the Way number
+ BGE Loop3
+ SUBS R7, R7, #1 // Decrement the Set number
+ BGE Loop2
+Skip ADD R10, R10, #2 // increment the cache number
+ CMP R3, R10
+ BGT Loop1
+
+Finished
+ DSB
+ POP {R4-R11}
+ BX lr
+
+}
+#pragma pop
+
+/** \brief __v7_all_cache - helper function
+
+ */
+
+/** \brief Invalidate the whole D$
+
+ DCISW. Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_inv_dcache_all(void) {
+ __v7_all_cache(0);
+}
+
+/** \brief Clean the whole D$
+
+ DCCSW. Clean by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_dcache_all(void) {
+ __v7_all_cache(1);
+}
+
+/** \brief Clean and invalidate the whole D$
+
+ DCCISW. Clean and Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_inv_dcache_all(void) {
+ __v7_all_cache(2);
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__ICCARM__)) /*---------------- ICC Compiler ---------------------*/
+
+#error IAR Compiler support not implemented for Cortex-A
+
+#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
+
+/* GNU gcc specific functions */
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i");
+}
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __disable_irq(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("mrs %0, cpsr" : "=r" (result));
+ __ASM volatile ("cpsid i");
+ return(result & 0x80);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+#if 1
+ uint32_t result;
+
+ __ASM volatile ("mrs %0, apsr" : "=r" (result) );
+ return (result);
+#else
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+#endif
+}
+
+
+/** \brief Get CPSR Register
+
+ This function returns the content of the CPSR Register.
+
+ \return CPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CPSR(void)
+{
+#if 1
+ register uint32_t __regCPSR;
+ __ASM volatile ("mrs %0, cpsr" : "=r" (__regCPSR));
+#else
+ register uint32_t __regCPSR __ASM("cpsr");
+#endif
+ return(__regCPSR);
+}
+
+#if 0
+/** \brief Set Stack Pointer
+
+ This function assigns the given value to the current stack pointer.
+
+ \param [in] topOfStack Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_SP(uint32_t topOfStack)
+{
+ register uint32_t __regSP __ASM("sp");
+ __regSP = topOfStack;
+}
+#endif
+
+/** \brief Get link register
+
+ This function returns the value of the link register
+
+ \return Value of link register
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_LR(void)
+{
+ register uint32_t __reglr __ASM("lr");
+ return(__reglr);
+}
+
+#if 0
+/** \brief Set link register
+
+ This function sets the value of the link register
+
+ \param [in] lr LR value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_LR(uint32_t lr)
+{
+ register uint32_t __reglr __ASM("lr");
+ __reglr = lr;
+}
+#endif
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+extern void __set_PSP(uint32_t topOfProcStack);
+
+/** \brief Set User Mode
+
+ This function changes the processor state to User Mode
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+extern void __set_CPS_USR(void);
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+#if 1
+ uint32_t result;
+
+ __ASM volatile ("vmrs %0, fpscr" : "=r" (result) );
+ return (result);
+#else
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#endif
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+#if 1
+ __ASM volatile ("vmsr fpscr, %0" : : "r" (fpscr) );
+#else
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+#endif
+}
+
+/** \brief Get FPEXC
+
+ This function returns the current value of the Floating Point Exception Control register.
+
+ \return Floating Point Exception Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPEXC(void)
+{
+#if (__FPU_PRESENT == 1)
+#if 1
+ uint32_t result;
+
+ __ASM volatile ("vmrs %0, fpexc" : "=r" (result));
+ return (result);
+#else
+ register uint32_t __regfpexc __ASM("fpexc");
+ return(__regfpexc);
+#endif
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPEXC
+
+ This function assigns the given value to the Floating Point Exception Control register.
+
+ \param [in] fpscr Floating Point Exception Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPEXC(uint32_t fpexc)
+{
+#if (__FPU_PRESENT == 1)
+#if 1
+ __ASM volatile ("vmsr fpexc, %0" : : "r" (fpexc));
+#else
+ register uint32_t __regfpexc __ASM("fpexc");
+ __regfpexc = (fpexc);
+#endif
+#endif
+}
+
+/** \brief Get CPACR
+
+ This function returns the current value of the Coprocessor Access Control register.
+
+ \return Coprocessor Access Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CPACR(void)
+{
+#if 1
+ register uint32_t __regCPACR;
+ __ASM volatile ("mrc p15, 0, %0, c1, c0, 2" : "=r" (__regCPACR));
+#else
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+#endif
+ return __regCPACR;
+}
+
+/** \brief Set CPACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] cpacr Coporcessor Acccess Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CPACR(uint32_t cpacr)
+{
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c1, c0, 2" : : "r" (cpacr));
+#else
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ __regCPACR = cpacr;
+#endif
+ __ISB();
+}
+
+/** \brief Get CBAR
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Configuration Base Address register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CBAR() {
+#if 1
+ register uint32_t __regCBAR;
+ __ASM volatile ("mrc p15, 4, %0, c15, c0, 0" : "=r" (__regCBAR));
+#else
+ register uint32_t __regCBAR __ASM("cp15:4:c15:c0:0");
+#endif
+ return(__regCBAR);
+}
+
+/** \brief Get TTBR0
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Translation Table Base Register 0 value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_TTBR0() {
+#if 1
+ register uint32_t __regTTBR0;
+ __ASM volatile ("mrc p15, 0, %0, c2, c0, 0" : "=r" (__regTTBR0));
+#else
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+#endif
+ return(__regTTBR0);
+}
+
+/** \brief Set TTBR0
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] ttbr0 Translation Table Base Register 0 value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c2, c0, 0" : : "r" (ttbr0));
+#else
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ __regTTBR0 = ttbr0;
+#endif
+ __ISB();
+}
+
+/** \brief Get DACR
+
+ This function returns the value of the Domain Access Control Register.
+
+ \return Domain Access Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_DACR() {
+#if 1
+ register uint32_t __regDACR;
+ __ASM volatile ("mrc p15, 0, %0, c3, c0, 0" : "=r" (__regDACR));
+#else
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+#endif
+ return(__regDACR);
+}
+
+/** \brief Set DACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] dacr Domain Access Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_DACR(uint32_t dacr) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c3, c0, 0" : : "r" (dacr));
+#else
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ __regDACR = dacr;
+#endif
+ __ISB();
+}
+
+/******************************** Cache and BTAC enable ****************************************************/
+
+/** \brief Set SCTLR
+
+ This function assigns the given value to the System Control Register.
+
+ \param [in] sctlr System Control Register, value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_SCTLR(uint32_t sctlr)
+{
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c1, c0, 0" : : "r" (sctlr));
+#else
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ __regSCTLR = sctlr;
+#endif
+}
+
+/** \brief Get SCTLR
+
+ This function returns the value of the System Control Register.
+
+ \return System Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_SCTLR() {
+#if 1
+ register uint32_t __regSCTLR;
+ __ASM volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (__regSCTLR));
+#else
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+#endif
+ return(__regSCTLR);
+}
+
+/** \brief Enable Caches
+
+ Enable Caches
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_caches(void) {
+ // Set I bit 12 to enable I Cache
+ // Set C bit 2 to enable D Cache
+ __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief Disable Caches
+
+ Disable Caches
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_caches(void) {
+ // Clear I bit 12 to disable I Cache
+ // Clear C bit 2 to disable D Cache
+ __set_SCTLR( __get_SCTLR() & ~(1 << 12) & ~(1 << 2));
+ __ISB();
+}
+
+/** \brief Enable BTAC
+
+ Enable BTAC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_btac(void) {
+ // Set Z bit 11 to enable branch prediction
+ __set_SCTLR( __get_SCTLR() | (1 << 11));
+ __ISB();
+}
+
+/** \brief Disable BTAC
+
+ Disable BTAC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_btac(void) {
+ // Clear Z bit 11 to disable branch prediction
+ __set_SCTLR( __get_SCTLR() & ~(1 << 11));
+}
+
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_mmu(void) {
+ // Set M bit 0 to enable the MMU
+ // Set AFE bit to enable simplified access permissions model
+ // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+ __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+ __ISB();
+}
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_mmu(void) {
+ // Clear M bit 0 to disable the MMU
+ __set_SCTLR( __get_SCTLR() & ~1);
+ __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief Invalidate the whole tlb
+
+ TLBIALL. Invalidate the whole tlb
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c8, c7, 0" : : "r" (0));
+#else
+ register uint32_t __TLBIALL __ASM("cp15:0:c8:c7:0");
+ __TLBIALL = 0;
+#endif
+ __DSB();
+ __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief Invalidate entire branch predictor array
+
+ BPIALL. Branch Predictor Invalidate All.
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_btac(void) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c5, 6" : : "r" (0));
+#else
+ register uint32_t __BPIALL __ASM("cp15:0:c7:c5:6");
+ __BPIALL = 0;
+#endif
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief Invalidate the whole I$
+
+ ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_icache_all(void) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c5, 0" : : "r" (0));
+#else
+ register uint32_t __ICIALLU __ASM("cp15:0:c7:c5:0");
+ __ICIALLU = 0;
+#endif
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new I cache state
+}
+
+/** \brief Clean D$ by MVA
+
+ DCCMVAC. Data cache clean by MVA to PoC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_dcache_mva(void *va) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c10, 1" : : "r" ((uint32_t)va));
+#else
+ register uint32_t __DCCMVAC __ASM("cp15:0:c7:c10:1");
+ __DCCMVAC = (uint32_t)va;
+#endif
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Invalidate D$ by MVA
+
+ DCIMVAC. Data cache invalidate by MVA to PoC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_dcache_mva(void *va) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c6, 1" : : "r" ((uint32_t)va));
+#else
+ register uint32_t __DCIMVAC __ASM("cp15:0:c7:c6:1");
+ __DCIMVAC = (uint32_t)va;
+#endif
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Clean and Invalidate D$ by MVA
+
+ DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c14, 1" : : "r" ((uint32_t)va));
+#else
+ register uint32_t __DCCIMVAC __ASM("cp15:0:c7:c14:1");
+ __DCCIMVAC = (uint32_t)va;
+#endif
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief
+ * Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency.
+ */
+
+/** \brief __v7_all_cache - helper function
+
+ */
+
+extern void __v7_all_cache(uint32_t op);
+
+
+/** \brief Invalidate the whole D$
+
+ DCISW. Invalidate by Set/Way
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_dcache_all(void) {
+ __v7_all_cache(0);
+}
+
+/** \brief Clean the whole D$
+
+ DCCSW. Clean by Set/Way
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_dcache_all(void) {
+ __v7_all_cache(1);
+}
+
+/** \brief Clean and invalidate the whole D$
+
+ DCCISW. Clean and Invalidate by Set/Way
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_inv_dcache_all(void) {
+ __v7_all_cache(2);
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__TASKING__)) /*--------------- TASKING Compiler -----------------*/
+
+#error TASKING Compiler support not implemented for Cortex-A
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CAFUNC_H__ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_MTS_DRAGONFLY_F411RE/core_caInstr.h Tue Jun 09 14:29:26 2015 +0100 @@ -0,0 +1,45 @@ +/**************************************************************************//** + * @file core_caInstr.h + * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File + * @version + * @date 04. December 2012 + * + * @note + * + ******************************************************************************/ +/* Copyright (c) 2009 - 2012 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + +#ifndef __CORE_CAINSTR_H__ +#define __CORE_CAINSTR_H__ + +#define __CORTEX_M 0x3 +#include "core_cmInstr.h" +#undef __CORTEX_M + +#endif +
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/core_ca_mmu.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,848 @@
+;/**************************************************************************//**
+; * @file core_ca_mmu.h
+; * @brief MMU Startup File for
+; * VE_A9_MP Device Series
+; * @version V1.01
+; * @date 25 March 2013
+; *
+; * @note
+; *
+; ******************************************************************************/
+;/* Copyright (c) 2012 ARM LIMITED
+;
+; All rights reserved.
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+; - Redistributions of source code must retain the above copyright
+; notice, this list of conditions and the following disclaimer.
+; - Redistributions in binary form must reproduce the above copyright
+; notice, this list of conditions and the following disclaimer in the
+; documentation and/or other materials provided with the distribution.
+; - Neither the name of ARM nor the names of its contributors may be used
+; to endorse or promote products derived from this software without
+; specific prior written permission.
+; *
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+; ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+; LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+; CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+; SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+; INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+; CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+; ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+; POSSIBILITY OF SUCH DAMAGE.
+; ---------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef _MMU_FUNC_H
+#define _MMU_FUNC_H
+
+#define SECTION_DESCRIPTOR (0x2)
+#define SECTION_MASK (0xFFFFFFFC)
+
+#define SECTION_TEXCB_MASK (0xFFFF8FF3)
+#define SECTION_B_SHIFT (2)
+#define SECTION_C_SHIFT (3)
+#define SECTION_TEX0_SHIFT (12)
+#define SECTION_TEX1_SHIFT (13)
+#define SECTION_TEX2_SHIFT (14)
+
+#define SECTION_XN_MASK (0xFFFFFFEF)
+#define SECTION_XN_SHIFT (4)
+
+#define SECTION_DOMAIN_MASK (0xFFFFFE1F)
+#define SECTION_DOMAIN_SHIFT (5)
+
+#define SECTION_P_MASK (0xFFFFFDFF)
+#define SECTION_P_SHIFT (9)
+
+#define SECTION_AP_MASK (0xFFFF73FF)
+#define SECTION_AP_SHIFT (10)
+#define SECTION_AP2_SHIFT (15)
+
+#define SECTION_S_MASK (0xFFFEFFFF)
+#define SECTION_S_SHIFT (16)
+
+#define SECTION_NG_MASK (0xFFFDFFFF)
+#define SECTION_NG_SHIFT (17)
+
+#define SECTION_NS_MASK (0xFFF7FFFF)
+#define SECTION_NS_SHIFT (19)
+
+
+#define PAGE_L1_DESCRIPTOR (0x1)
+#define PAGE_L1_MASK (0xFFFFFFFC)
+
+#define PAGE_L2_4K_DESC (0x2)
+#define PAGE_L2_4K_MASK (0xFFFFFFFD)
+
+#define PAGE_L2_64K_DESC (0x1)
+#define PAGE_L2_64K_MASK (0xFFFFFFFC)
+
+#define PAGE_4K_TEXCB_MASK (0xFFFFFE33)
+#define PAGE_4K_B_SHIFT (2)
+#define PAGE_4K_C_SHIFT (3)
+#define PAGE_4K_TEX0_SHIFT (6)
+#define PAGE_4K_TEX1_SHIFT (7)
+#define PAGE_4K_TEX2_SHIFT (8)
+
+#define PAGE_64K_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_64K_B_SHIFT (2)
+#define PAGE_64K_C_SHIFT (3)
+#define PAGE_64K_TEX0_SHIFT (12)
+#define PAGE_64K_TEX1_SHIFT (13)
+#define PAGE_64K_TEX2_SHIFT (14)
+
+#define PAGE_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_B_SHIFT (2)
+#define PAGE_C_SHIFT (3)
+#define PAGE_TEX_SHIFT (12)
+
+#define PAGE_XN_4K_MASK (0xFFFFFFFE)
+#define PAGE_XN_4K_SHIFT (0)
+#define PAGE_XN_64K_MASK (0xFFFF7FFF)
+#define PAGE_XN_64K_SHIFT (15)
+
+
+#define PAGE_DOMAIN_MASK (0xFFFFFE1F)
+#define PAGE_DOMAIN_SHIFT (5)
+
+#define PAGE_P_MASK (0xFFFFFDFF)
+#define PAGE_P_SHIFT (9)
+
+#define PAGE_AP_MASK (0xFFFFFDCF)
+#define PAGE_AP_SHIFT (4)
+#define PAGE_AP2_SHIFT (9)
+
+#define PAGE_S_MASK (0xFFFFFBFF)
+#define PAGE_S_SHIFT (10)
+
+#define PAGE_NG_MASK (0xFFFFF7FF)
+#define PAGE_NG_SHIFT (11)
+
+#define PAGE_NS_MASK (0xFFFFFFF7)
+#define PAGE_NS_SHIFT (3)
+
+#define OFFSET_1M (0x00100000)
+#define OFFSET_64K (0x00010000)
+#define OFFSET_4K (0x00001000)
+
+#define DESCRIPTOR_FAULT (0x00000000)
+
+/* ########################### MMU Function Access ########################### */
+/** \ingroup MMU_FunctionInterface
+ \defgroup MMU_Functions MMU Functions Interface
+ @{
+ */
+
+/* Attributes enumerations */
+
+/* Region size attributes */
+typedef enum
+{
+ SECTION,
+ PAGE_4k,
+ PAGE_64k,
+} mmu_region_size_Type;
+
+/* Region type attributes */
+typedef enum
+{
+ NORMAL,
+ DEVICE,
+ SHARED_DEVICE,
+ NON_SHARED_DEVICE,
+ STRONGLY_ORDERED
+} mmu_memory_Type;
+
+/* Region cacheability attributes */
+typedef enum
+{
+ NON_CACHEABLE,
+ WB_WA,
+ WT,
+ WB_NO_WA,
+} mmu_cacheability_Type;
+
+/* Region parity check attributes */
+typedef enum
+{
+ ECC_DISABLED,
+ ECC_ENABLED,
+} mmu_ecc_check_Type;
+
+/* Region execution attributes */
+typedef enum
+{
+ EXECUTE,
+ NON_EXECUTE,
+} mmu_execute_Type;
+
+/* Region global attributes */
+typedef enum
+{
+ GLOBAL,
+ NON_GLOBAL,
+} mmu_global_Type;
+
+/* Region shareability attributes */
+typedef enum
+{
+ NON_SHARED,
+ SHARED,
+} mmu_shared_Type;
+
+/* Region security attributes */
+typedef enum
+{
+ SECURE,
+ NON_SECURE,
+} mmu_secure_Type;
+
+/* Region access attributes */
+typedef enum
+{
+ NO_ACCESS,
+ RW,
+ READ,
+} mmu_access_Type;
+
+/* Memory Region definition */
+typedef struct RegionStruct {
+ mmu_region_size_Type rg_t;
+ mmu_memory_Type mem_t;
+ uint8_t domain;
+ mmu_cacheability_Type inner_norm_t;
+ mmu_cacheability_Type outer_norm_t;
+ mmu_ecc_check_Type e_t;
+ mmu_execute_Type xn_t;
+ mmu_global_Type g_t;
+ mmu_secure_Type sec_t;
+ mmu_access_Type priv_t;
+ mmu_access_Type user_t;
+ mmu_shared_Type sh_t;
+
+} mmu_region_attributes_Type;
+
+/** \brief Set section execution-never attribute
+
+ The function sets section execution-never attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] xn Section execution-never attribute : EXECUTE , NON_EXECUTE.
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_section(uint32_t *descriptor_l1, mmu_execute_Type xn)
+{
+ *descriptor_l1 &= SECTION_XN_MASK;
+ *descriptor_l1 |= ((xn & 0x1) << SECTION_XN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section domain
+
+ The function sets section domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Section domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_section(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= SECTION_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xF) << SECTION_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section parity check
+
+ The function sets section parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_section(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set section access privileges
+
+ The function sets section access privileges
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_section(uint32_t *descriptor_l1, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x6; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l1 &= SECTION_AP_MASK;
+ *descriptor_l1 |= (ap & 0x3) << SECTION_AP_SHIFT;
+ *descriptor_l1 |= ((ap & 0x4)>>2) << SECTION_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set section shareability
+
+ The function sets section shareability
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_section(uint32_t *descriptor_l1, mmu_shared_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_S_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Global attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] g_bit Section attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_section(uint32_t *descriptor_l1, mmu_global_Type g_bit)
+{
+ *descriptor_l1 &= SECTION_NG_MASK;
+ *descriptor_l1 |= ((g_bit & 0x1) << SECTION_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Security attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_section(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_NS_SHIFT);
+ return 0;
+}
+
+/* Page 4k or 64k */
+/** \brief Set 4k/64k page execution-never attribute
+
+ The function sets 4k/64k page execution-never attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] xn Page execution-never attribute : EXECUTE , NON_EXECUTE.
+ \param [in] page Page size: PAGE_4k, PAGE_64k,
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_page(uint32_t *descriptor_l2, mmu_execute_Type xn, mmu_region_size_Type page)
+{
+ if (page == PAGE_4k)
+ {
+ *descriptor_l2 &= PAGE_XN_4K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_4K_SHIFT);
+ }
+ else
+ {
+ *descriptor_l2 &= PAGE_XN_64K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_64K_SHIFT);
+ }
+ return 0;
+}
+
+/** \brief Set 4k/64k page domain
+
+ The function sets 4k/64k page domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Page domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_page(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= PAGE_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xf) << PAGE_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page parity check
+
+ The function sets 4k/64k page parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_page(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page access privileges
+
+ The function sets 4k/64k page access privileges
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_page(uint32_t *descriptor_l2, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x6; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l2 &= PAGE_AP_MASK;
+ *descriptor_l2 |= (ap & 0x3) << PAGE_AP_SHIFT;
+ *descriptor_l2 |= ((ap & 0x4)>>2) << PAGE_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page shareability
+
+ The function sets 4k/64k page shareability
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] s_bit 4k/64k page shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_page(uint32_t *descriptor_l2, mmu_shared_Type s_bit)
+{
+ *descriptor_l2 &= PAGE_S_MASK;
+ *descriptor_l2 |= ((s_bit & 0x1) << PAGE_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Global attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] g_bit 4k/64k page attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_page(uint32_t *descriptor_l2, mmu_global_Type g_bit)
+{
+ *descriptor_l2 &= PAGE_NG_MASK;
+ *descriptor_l2 |= ((g_bit & 0x1) << PAGE_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Security attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit 4k/64k page Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_page(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= PAGE_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << PAGE_NS_SHIFT);
+ return 0;
+}
+
+
+/** \brief Set Section memory attributes
+
+ The function sets section memory attributes
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] mem Section memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_section(uint32_t *descriptor_l1, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner)
+{
+ *descriptor_l1 &= SECTION_TEXCB_MASK;
+
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l1 |= 1 << SECTION_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT) | (1 << SECTION_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT) | (1 << SECTION_TEX0_SHIFT);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page memory attributes
+
+ The function sets 4k/64k page memory attributes
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] mem 4k/64k page memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_page(uint32_t *descriptor_l2, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner, mmu_region_size_Type page)
+{
+ *descriptor_l2 &= PAGE_4K_TEXCB_MASK;
+
+ if (page == PAGE_64k)
+ {
+ //same as section
+ __memory_section(descriptor_l2, mem, outer, inner);
+ }
+ else
+ {
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l2 |= 1 << PAGE_4K_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT) | (1 << PAGE_4K_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT) | (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Create a L1 section descriptor
+
+ The function creates a section descriptor.
+
+ Assumptions:
+ - 16MB super sections not suported
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg Section attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_section_descriptor(uint32_t *descriptor, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+
+ __memory_section(descriptor, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t);
+ __xn_section(descriptor,reg.xn_t);
+ __domain_section(descriptor, reg.domain);
+ __p_section(descriptor, reg.e_t);
+ __ap_section(descriptor, reg.priv_t, reg.user_t, 1);
+ __shared_section(descriptor,reg.sh_t);
+ __global_section(descriptor,reg.g_t);
+ __secure_section(descriptor,reg.sec_t);
+ *descriptor &= SECTION_MASK;
+ *descriptor |= SECTION_DESCRIPTOR;
+
+ return 0;
+
+}
+
+
+/** \brief Create a L1 and L2 4k/64k page descriptor
+
+ The function creates a 4k/64k page descriptor.
+ Assumptions:
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg 4k/64k page attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_page_descriptor(uint32_t *descriptor, uint32_t *descriptor2, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+ *descriptor2 = 0;
+
+ switch (reg.rg_t)
+ {
+ case PAGE_4k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_4k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_4k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_4K_MASK;
+ *descriptor2 |= PAGE_L2_4K_DESC;
+ break;
+
+ case PAGE_64k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_64k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_64k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_64K_MASK;
+ *descriptor2 |= PAGE_L2_64K_DESC;
+ break;
+
+ case SECTION:
+ //error
+ break;
+
+ }
+
+ return 0;
+
+}
+
+/** \brief Create a 1MB Section
+
+ \param [in] ttb Translation table base address
+ \param [in] base_address Section base address
+ \param [in] count Number of sections to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTSection(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1)
+{
+ uint32_t offset;
+ uint32_t entry;
+ uint32_t i;
+
+ offset = base_address >> 20;
+ entry = (base_address & 0xFFF00000) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb = ttb + offset;
+
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb++ = entry;
+ entry += OFFSET_1M;
+ }
+}
+
+/** \brief Create a 4k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 4k base address
+ \param [in] count Number of 4k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_4k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFFF000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_4K;
+ }
+}
+
+/** \brief Create a 64k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 64k base address
+ \param [in] count Number of 64k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_64k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i,j;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFF0000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //create 16 entries
+ for (j = 0; j < 16; j++)
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_64K;
+ }
+}
+
+/*@} end of MMU_Functions */
+#endif
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/core_cm0.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,682 @@
+/**************************************************************************//**
+ * @file core_cm0.h
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M0
+ @{
+ */
+
+/* CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/core_cm0plus.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,793 @@
+/**************************************************************************//**
+ * @file core_cm0plus.h
+ * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0PLUS_H_GENERIC
+#define __CORE_CM0PLUS_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex-M0+
+ @{
+ */
+
+/* CMSIS CM0P definitions */
+#define __CM0PLUS_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0PLUS_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16) | \
+ __CM0PLUS_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0PLUS_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0PLUS_H_DEPENDANT
+#define __CORE_CM0PLUS_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0PLUS_REV
+ #define __CM0PLUS_REV 0x0000
+ #warning "__CM0PLUS_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __VTOR_PRESENT
+ #define __VTOR_PRESENT 0
+ #warning "__VTOR_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex-M0+ */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+#if (__VTOR_PRESENT == 1)
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+#else
+ uint32_t RESERVED0;
+#endif
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if (__VTOR_PRESENT == 1)
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 8 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 8 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0+ Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0PLUS_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/core_cm3.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,1627 @@
+/**************************************************************************//**
+ * @file core_cm3.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM3_H_GENERIC
+#define __CORE_CM3_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M3
+ @{
+ */
+
+/* CMSIS CM3 definitions */
+#define __CM3_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | \
+ __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x03) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI__VFP_SUPPORT____
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM3_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM3_H_DEPENDANT
+#define __CORE_CM3_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM3_REV
+ #define __CM3_REV 0x0200
+ #warning "__CM3_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M3 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#if (__CM3_REV < 0x0201) /* core r2p1 */
+#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#else
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+#else
+ uint32_t RESERVED1[1];
+#endif
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM3_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/core_cm4.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,1772 @@
+/**************************************************************************//**
+ * @file core_cm4.h
+ * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_H_GENERIC
+#define __CORE_CM4_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M4
+ @{
+ */
+
+/* CMSIS CM4 definitions */
+#define __CM4_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM4_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16) | \
+ __CM4_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x04) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+#include <core_cm4_simd.h> /* Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CM4_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM4_H_DEPENDANT
+#define __CORE_CM4_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM4_REV
+ #define __CM4_REV 0x0000
+ #warning "__CM4_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 0
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M4 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ - Core FPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISOOFP_Pos 9 /*!< ACTLR: DISOOFP Position */
+#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */
+
+#define SCnSCB_ACTLR_DISFPCA_Pos 8 /*!< ACTLR: DISFPCA Position */
+#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_FPU Floating Point Unit (FPU)
+ \brief Type definitions for the Floating Point Unit (FPU)
+ @{
+ */
+
+/** \brief Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __IO uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
+ __IO uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
+ __IO uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
+ __I uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
+ __I uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register */
+#define FPU_FPCCR_ASPEN_Pos 31 /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos 30 /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos 8 /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos 6 /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos 5 /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos 4 /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos 3 /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos 1 /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos 0 /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk (1UL << FPU_FPCCR_LSPACT_Pos) /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register */
+#define FPU_FPCAR_ADDRESS_Pos 3 /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register */
+#define FPU_FPDSCR_AHP_Pos 26 /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos 25 /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos 24 /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos 22 /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 */
+#define FPU_MVFR0_FP_rounding_modes_Pos 28 /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos 24 /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos 20 /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos 16 /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos 12 /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos 8 /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos 4 /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos 0 /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL << FPU_MVFR0_A_SIMD_registers_Pos) /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 */
+#define FPU_MVFR1_FP_fused_MAC_Pos 28 /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos 24 /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos 4 /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos 0 /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk (0xFUL << FPU_MVFR1_FtZ_mode_Pos) /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+#if (__FPU_PRESENT == 1)
+ #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
+ #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+/* NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); enable interrupt */
+ NVIC->ISER[(uint32_t)((int32_t)IRQn) >> 5] = (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM4_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/core_cm4_simd.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,673 @@
+/**************************************************************************//**
+ * @file core_cm4_simd.h
+ * @brief CMSIS Cortex-M4 SIMD Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_SIMD_H
+#define __CORE_CM4_SIMD_H
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ ******************************************************************************/
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#define __SADD8 __sadd8
+#define __QADD8 __qadd8
+#define __SHADD8 __shadd8
+#define __UADD8 __uadd8
+#define __UQADD8 __uqadd8
+#define __UHADD8 __uhadd8
+#define __SSUB8 __ssub8
+#define __QSUB8 __qsub8
+#define __SHSUB8 __shsub8
+#define __USUB8 __usub8
+#define __UQSUB8 __uqsub8
+#define __UHSUB8 __uhsub8
+#define __SADD16 __sadd16
+#define __QADD16 __qadd16
+#define __SHADD16 __shadd16
+#define __UADD16 __uadd16
+#define __UQADD16 __uqadd16
+#define __UHADD16 __uhadd16
+#define __SSUB16 __ssub16
+#define __QSUB16 __qsub16
+#define __SHSUB16 __shsub16
+#define __USUB16 __usub16
+#define __UQSUB16 __uqsub16
+#define __UHSUB16 __uhsub16
+#define __SASX __sasx
+#define __QASX __qasx
+#define __SHASX __shasx
+#define __UASX __uasx
+#define __UQASX __uqasx
+#define __UHASX __uhasx
+#define __SSAX __ssax
+#define __QSAX __qsax
+#define __SHSAX __shsax
+#define __USAX __usax
+#define __UQSAX __uqsax
+#define __UHSAX __uhsax
+#define __USAD8 __usad8
+#define __USADA8 __usada8
+#define __SSAT16 __ssat16
+#define __USAT16 __usat16
+#define __UXTB16 __uxtb16
+#define __UXTAB16 __uxtab16
+#define __SXTB16 __sxtb16
+#define __SXTAB16 __sxtab16
+#define __SMUAD __smuad
+#define __SMUADX __smuadx
+#define __SMLAD __smlad
+#define __SMLADX __smladx
+#define __SMLALD __smlald
+#define __SMLALDX __smlaldx
+#define __SMUSD __smusd
+#define __SMUSDX __smusdx
+#define __SMLSD __smlsd
+#define __SMLSDX __smlsdx
+#define __SMLSLD __smlsld
+#define __SMLSLDX __smlsldx
+#define __SEL __sel
+#define __QADD __qadd
+#define __QSUB __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
+ ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
+
+#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
+ ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
+
+#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+ ((int64_t)(ARG3) << 32) ) >> 32))
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_iar.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_ccs.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLALD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLALDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLSLD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLSLDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ if (ARG3 == 0) \
+ __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
+ else \
+ __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+/* not yet supported */
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CORE_CM4_SIMD_H */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/core_cmFunc.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,636 @@
+/**************************************************************************//**
+ * @file core_cmFunc.h
+ * @brief CMSIS Cortex-M Core Function Access Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ register uint32_t __regIPSR __ASM("ipsr");
+ return(__regIPSR);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ register uint32_t __regXPSR __ASM("xpsr");
+ return(__regXPSR);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ return(__regProcessStackPointer);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ __regProcessStackPointer = topOfProcStack;
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ return(__regMainStackPointer);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ __regMainStackPointer = topOfMainStack;
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0xff);
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/** \brief Enable IRQ Interrupts
+
+ This function enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ uint32_t result;
+
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all instrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CMFUNC_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/core_cmInstr.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,688 @@
+/**************************************************************************//**
+ * @file core_cmInstr.h
+ * @brief CMSIS Cortex-M Core Instruction Access Header File
+ * @version V3.20
+ * @date 05. March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __nop
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+#define __WFI __wfi
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __wfe
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __sev
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+#define __ISB() __isb(0xF)
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() __dsb(0xF)
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() __dmb(0xF)
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __rev
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+ rev16 r0, r0
+ bx lr
+}
+#endif
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+ revsh r0, r0
+ bx lr
+}
+#endif
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+#define __ROR __ror
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __breakpoint(value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __RBIT __rbit
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXB(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXH(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXW(value, ptr) __strex(value, ptr)
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+#define __CLREX __clrex
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT __ssat
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __usat
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __clz
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constrant "l"
+ * Otherwise, use general registers, specified by constrant "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __NOP(void)
+{
+ __ASM volatile ("nop");
+}
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFI(void)
+{
+ __ASM volatile ("wfi");
+}
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFE(void)
+{
+ __ASM volatile ("wfe");
+}
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __SEV(void)
+{
+ __ASM volatile ("sev");
+}
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ISB(void)
+{
+ __ASM volatile ("isb");
+}
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DSB(void)
+{
+ __ASM volatile ("dsb");
+}
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void)
+{
+ __ASM volatile ("dmb");
+}
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+ return __builtin_bswap32(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ return (short)__builtin_bswap16(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32 - op2));
+}
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void)
+{
+ __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/hal_tick.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,60 @@
+/**
+ ******************************************************************************
+ * @file hal_tick.h
+ * @author MCD Application Team
+ * @brief Initialization of HAL tick
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#ifndef __HAL_TICK_H
+#define __HAL_TICK_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "stm32f4xx.h"
+#include "cmsis_nvic.h"
+
+#define TIM_MST TIM5
+#define TIM_MST_IRQ TIM5_IRQn
+#define TIM_MST_RCC __TIM5_CLK_ENABLE()
+
+#define TIM_MST_RESET_ON __TIM5_FORCE_RESET()
+#define TIM_MST_RESET_OFF __TIM5_RELEASE_RESET()
+
+#define HAL_TICK_DELAY (1000) // 1 ms
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __HAL_TICK_H
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32_hal_legacy.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,2307 @@
+/**
+ ******************************************************************************
+ * @file stm32_hal_legacy.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief This file contains aliases definition for the STM32Cube HAL constants
+ * macros and functions maintained for legacy purpose.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ UART * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32_HAL_LEGACY
+#define __STM32_HAL_LEGACY
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define AES_FLAG_RDERR CRYP_FLAG_RDERR
+#define AES_FLAG_WRERR CRYP_FLAG_WRERR
+#define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF
+#define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR
+#define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define ADC_RESOLUTION12b ADC_RESOLUTION_12B
+#define ADC_RESOLUTION10b ADC_RESOLUTION_10B
+#define ADC_RESOLUTION8b ADC_RESOLUTION_8B
+#define ADC_RESOLUTION6b ADC_RESOLUTION_6B
+#define OVR_DATA_OVERWRITTEN ADC_OVR_DATA_OVERWRITTEN
+#define OVR_DATA_PRESERVED ADC_OVR_DATA_PRESERVED
+#define EOC_SINGLE_CONV ADC_EOC_SINGLE_CONV
+#define EOC_SEQ_CONV ADC_EOC_SEQ_CONV
+#define EOC_SINGLE_SEQ_CONV ADC_EOC_SINGLE_SEQ_CONV
+#define REGULAR_GROUP ADC_REGULAR_GROUP
+#define INJECTED_GROUP ADC_INJECTED_GROUP
+#define REGULAR_INJECTED_GROUP ADC_REGULAR_INJECTED_GROUP
+#define AWD_EVENT ADC_AWD_EVENT
+#define AWD1_EVENT ADC_AWD1_EVENT
+#define AWD2_EVENT ADC_AWD2_EVENT
+#define AWD3_EVENT ADC_AWD3_EVENT
+#define OVR_EVENT ADC_OVR_EVENT
+#define JQOVF_EVENT ADC_JQOVF_EVENT
+#define ALL_CHANNELS ADC_ALL_CHANNELS
+#define REGULAR_CHANNELS ADC_REGULAR_CHANNELS
+#define INJECTED_CHANNELS ADC_INJECTED_CHANNELS
+#define SYSCFG_FLAG_SENSOR_ADC ADC_FLAG_SENSOR
+#define SYSCFG_FLAG_VREF_ADC ADC_FLAG_VREFINT
+#define ADC_EXTERNALTRIG0_T6_TRGO ADC_EXTERNALTRIGCONV_T6_TRGO
+#define ADC_EXTERNALTRIG1_T21_CC2 ADC_EXTERNALTRIGCONV_T21_CC2
+#define ADC_EXTERNALTRIG2_T2_TRGO ADC_EXTERNALTRIGCONV_T2_TRGO
+#define ADC_EXTERNALTRIG3_T2_CC4 ADC_EXTERNALTRIGCONV_T2_CC4
+#define ADC_EXTERNALTRIG4_T22_TRGO ADC_EXTERNALTRIGCONV_T22_TRGO
+#define ADC_EXTERNALTRIG7_EXT_IT11 ADC_EXTERNALTRIGCONV_EXT_IT11
+#define ADC_CLOCK_ASYNC ADC_CLOCK_ASYNC_DIV1
+#define ADC_EXTERNALTRIG_EDGE_NONE ADC_EXTERNALTRIGCONVEDGE_NONE
+#define ADC_EXTERNALTRIG_EDGE_RISING ADC_EXTERNALTRIGCONVEDGE_RISING
+#define ADC_EXTERNALTRIG_EDGE_FALLING ADC_EXTERNALTRIGCONVEDGE_FALLING
+#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define COMP_WINDOWMODE_DISABLED COMP_WINDOWMODE_DISABLE
+#define COMP_WINDOWMODE_ENABLED COMP_WINDOWMODE_ENABLE
+#define COMP_EXTI_LINE_COMP1_EVENT COMP_EXTI_LINE_COMP1
+#define COMP_EXTI_LINE_COMP2_EVENT COMP_EXTI_LINE_COMP2
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define CRC_OUTPUTDATA_INVERSION_DISABLED CRC_OUTPUTDATA_INVERSION_DISABLE
+#define CRC_OUTPUTDATA_INVERSION_ENABLED CRC_OUTPUTDATA_INVERSION_ENABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define DAC1_CHANNEL_1 DAC_CHANNEL_1
+#define DAC1_CHANNEL_2 DAC_CHANNEL_2
+#define DAC2_CHANNEL_1 DAC_CHANNEL_1
+#define DAC_WAVE_NONE ((uint32_t)0x00000000)
+#define DAC_WAVE_NOISE ((uint32_t)DAC_CR_WAVE1_0)
+#define DAC_WAVE_TRIANGLE ((uint32_t)DAC_CR_WAVE1_1)
+#define DAC_WAVEGENERATION_NONE DAC_WAVE_NONE
+#define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE
+#define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define TYPEPROGRAM_BYTE FLASH_TYPEPROGRAM_BYTE
+#define TYPEPROGRAM_HALFWORD FLASH_TYPEPROGRAM_HALFWORD
+#define TYPEPROGRAM_WORD FLASH_TYPEPROGRAM_WORD
+#define TYPEPROGRAM_DOUBLEWORD FLASH_TYPEPROGRAM_DOUBLEWORD
+#define TYPEERASE_SECTORS FLASH_TYPEERASE_SECTORS
+#define TYPEERASE_PAGES FLASH_TYPEERASE_PAGES
+#define TYPEERASE_PAGEERASE FLASH_TYPEERASE_PAGES
+#define TYPEERASE_MASSERASE FLASH_TYPEERASE_MASSERASE
+#define WRPSTATE_DISABLE OB_WRPSTATE_DISABLE
+#define WRPSTATE_ENABLE OB_WRPSTATE_ENABLE
+#define HAL_FLASH_TIMEOUT_VALUE FLASH_TIMEOUT_VALUE
+#define OBEX_PCROP OPTIONBYTE_PCROP
+#define OBEX_BOOTCONFIG OPTIONBYTE_BOOTCONFIG
+#define PCROPSTATE_DISABLE OB_PCROP_STATE_DISABLE
+#define PCROPSTATE_ENABLE OB_PCROP_STATE_ENABLE
+#define TYPEERASEDATA_BYTE FLASH_TYPEERASEDATA_BYTE
+#define TYPEERASEDATA_HALFWORD FLASH_TYPEERASEDATA_HALFWORD
+#define TYPEERASEDATA_WORD FLASH_TYPEERASEDATA_WORD
+#define TYPEPROGRAMDATA_BYTE FLASH_TYPEPROGRAMDATA_BYTE
+#define TYPEPROGRAMDATA_HALFWORD FLASH_TYPEPROGRAMDATA_HALFWORD
+#define TYPEPROGRAMDATA_WORD FLASH_TYPEPROGRAMDATA_WORD
+#define TYPEPROGRAMDATA_FASTBYTE FLASH_TYPEPROGRAMDATA_FASTBYTE
+#define TYPEPROGRAMDATA_FASTHALFWORD FLASH_TYPEPROGRAMDATA_FASTHALFWORD
+#define TYPEPROGRAMDATA_FASTWORD FLASH_TYPEPROGRAMDATA_FASTWORD
+#define PAGESIZE FLASH_PAGE_SIZE
+#define TYPEPROGRAM_FASTBYTE FLASH_TYPEPROGRAM_BYTE
+#define TYPEPROGRAM_FASTHALFWORD FLASH_TYPEPROGRAM_HALFWORD
+#define TYPEPROGRAM_FASTWORD FLASH_TYPEPROGRAM_WORD
+#define VOLTAGE_RANGE_1 FLASH_VOLTAGE_RANGE_1
+#define VOLTAGE_RANGE_2 FLASH_VOLTAGE_RANGE_2
+#define VOLTAGE_RANGE_3 FLASH_VOLTAGE_RANGE_3
+#define VOLTAGE_RANGE_4 FLASH_VOLTAGE_RANGE_4
+#define TYPEPROGRAM_FAST FLASH_TYPEPROGRAM_FAST
+#define TYPEPROGRAM_FAST_AND_LAST FLASH_TYPEPROGRAM_FAST_AND_LAST
+#define WRPAREA_BANK1_AREAA OB_WRPAREA_BANK1_AREAA
+#define WRPAREA_BANK1_AREAB OB_WRPAREA_BANK1_AREAB
+#define WRPAREA_BANK2_AREAA OB_WRPAREA_BANK2_AREAA
+#define WRPAREA_BANK2_AREAB OB_WRPAREA_BANK2_AREAB
+#define IWDG_STDBY_FREEZE OB_IWDG_STDBY_FREEZE
+#define IWDG_STDBY_ACTIVE OB_IWDG_STDBY_RUN
+#define IWDG_STOP_FREEZE OB_IWDG_STOP_FREEZE
+#define IWDG_STOP_ACTIVE OB_IWDG_STOP_RUN
+#define IS_NBSECTORS IS_FLASH_NBSECTORS
+#define FLASH_ERROR_NONE HAL_FLASH_ERROR_NONE
+#define FLASH_ERROR_RD HAL_FLASH_ERROR_RD
+#define FLASH_ERROR_PG HAL_FLASH_ERROR_PROG
+#define FLASH_ERROR_PGP HAL_FLASH_ERROR_PGS
+#define FLASH_ERROR_WRP HAL_FLASH_ERROR_WRP
+#define FLASH_ERROR_OPTV HAL_FLASH_ERROR_OPTV
+#define FLASH_ERROR_OPTVUSR HAL_FLASH_ERROR_OPTVUSR
+#define FLASH_ERROR_PROG HAL_FLASH_ERROR_PROG
+#define FLASH_ERROR_OP HAL_FLASH_ERROR_OPERATION
+#define FLASH_ERROR_PGA HAL_FLASH_ERROR_PGA
+#define FLASH_ERROR_SIZE HAL_FLASH_ERROR_SIZE
+#define FLASH_ERROR_SIZ HAL_FLASH_ERROR_SIZE
+#define FLASH_ERROR_PGS HAL_FLASH_ERROR_PGS
+#define FLASH_ERROR_MIS HAL_FLASH_ERROR_MIS
+#define FLASH_ERROR_FAST HAL_FLASH_ERROR_FAST
+#define FLASH_ERROR_FWWERR HAL_FLASH_ERROR_FWWERR
+#define FLASH_ERROR_NOTZERO HAL_FLASH_ERROR_NOTZERO
+#define FLASH_ERROR_OPERATION HAL_FLASH_ERROR_OPERATION
+#define FLASH_ERROR_ERS HAL_FLASH_ERROR_ERS
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define SYSCFG_FASTMODEPLUS_I2C_PB6 I2C_FASTMODEPLUS_PB6
+#define SYSCFG_FASTMODEPLUS_I2C_PB7 I2C_FASTMODEPLUS_PB7
+#define SYSCFG_FASTMODEPLUS_I2C_PB8 I2C_FASTMODEPLUS_PB8
+#define SYSCFG_FASTMODEPLUS_I2C_PB9 I2C_FASTMODEPLUS_PB9
+#define SYSCFG_FASTMODEPLUS_I2C1 I2C_FASTMODEPLUS_I2C1
+#define SYSCFG_FASTMODEPLUS_I2C2 I2C_FASTMODEPLUS_I2C2
+#define SYSCFG_FASTMODEPLUS_I2C3 I2C_FASTMODEPLUS_I2C3
+
+/**
+ * @}
+ */
+
+
+/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define FSMC_NORSRAM_TYPEDEF FSMC_NORSRAM_TypeDef
+#define FSMC_NORSRAM_EXTENDED_TYPEDEF FSMC_NORSRAM_EXTENDED_TypeDef
+/**
+ * @}
+ */
+
+/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define GET_GPIO_SOURCE GPIO_GET_INDEX
+#define GET_GPIO_INDEX GPIO_GET_INDEX
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define I2C_DUALADDRESS_DISABLED I2C_DUALADDRESS_DISABLE
+#define I2C_DUALADDRESS_ENABLED I2C_DUALADDRESS_ENABLE
+#define I2C_GENERALCALL_DISABLED I2C_GENERALCALL_DISABLE
+#define I2C_GENERALCALL_ENABLED I2C_GENERALCALL_ENABLE
+#define I2C_NOSTRETCH_DISABLED I2C_NOSTRETCH_DISABLE
+#define I2C_NOSTRETCH_ENABLED I2C_NOSTRETCH_ENABLE
+#define I2C_ANALOGFILTER_ENABLED I2C_ANALOGFILTER_ENABLE
+#define I2C_ANALOGFILTER_DISABLED I2C_ANALOGFILTER_DISABLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define IRDA_ONE_BIT_SAMPLE_DISABLED IRDA_ONE_BIT_SAMPLE_DISABLE
+#define IRDA_ONE_BIT_SAMPLE_ENABLED IRDA_ONE_BIT_SAMPLE_ENABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define KR_KEY_RELOAD IWDG_KEY_RELOAD
+#define KR_KEY_ENABLE IWDG_KEY_ENABLE
+#define KR_KEY_EWA IWDG_KEY_WRITE_ACCESS_ENABLE
+#define KR_KEY_DWA IWDG_KEY_WRITE_ACCESS_DISABLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION
+#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS LPTIM_CLOCKSAMPLETIME_2TRANSITIONS
+#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS LPTIM_CLOCKSAMPLETIME_4TRANSITIONS
+#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS LPTIM_CLOCKSAMPLETIME_8TRANSITIONS
+
+#define LPTIM_CLOCKPOLARITY_RISINGEDGE LPTIM_CLOCKPOLARITY_RISING
+#define LPTIM_CLOCKPOLARITY_FALLINGEDGE LPTIM_CLOCKPOLARITY_FALLING
+#define LPTIM_CLOCKPOLARITY_BOTHEDGES LPTIM_CLOCKPOLARITY_RISING_FALLING
+/**
+ * @}
+ */
+
+/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define NAND_AddressTypedef NAND_AddressTypeDef
+
+#define __ARRAY_ADDRESS ARRAY_ADDRESS
+#define __ADDR_1st_CYCLE ADDR_1ST_CYCLE
+#define __ADDR_2nd_CYCLE ADDR_2ND_CYCLE
+#define __ADDR_3rd_CYCLE ADDR_3RD_CYCLE
+#define __ADDR_4th_CYCLE ADDR_4TH_CYCLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define NOR_StatusTypedef HAL_NOR_StatusTypeDef
+#define NOR_SUCCESS HAL_NOR_STATUS_SUCCESS
+#define NOR_ONGOING HAL_NOR_STATUS_ONGOING
+#define NOR_ERROR HAL_NOR_STATUS_ERROR
+#define NOR_TIMEOUT HAL_NOR_STATUS_TIMEOUT
+
+#define __NOR_WRITE NOR_WRITE
+#define __NOR_ADDR_SHIFT NOR_ADDR_SHIFT
+/**
+ * @}
+ */
+
+/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define OPAMP_NONINVERTINGINPUT_VP0 OPAMP_NONINVERTINGINPUT_IO0
+#define OPAMP_NONINVERTINGINPUT_VP1 OPAMP_NONINVERTINGINPUT_IO1
+#define OPAMP_NONINVERTINGINPUT_VP2 OPAMP_NONINVERTINGINPUT_IO2
+#define OPAMP_NONINVERTINGINPUT_VP3 OPAMP_NONINVERTINGINPUT_IO3
+
+#define OPAMP_SEC_NONINVERTINGINPUT_VP0 OPAMP_SEC_NONINVERTINGINPUT_IO0
+#define OPAMP_SEC_NONINVERTINGINPUT_VP1 OPAMP_SEC_NONINVERTINGINPUT_IO1
+#define OPAMP_SEC_NONINVERTINGINPUT_VP2 OPAMP_SEC_NONINVERTINGINPUT_IO2
+#define OPAMP_SEC_NONINVERTINGINPUT_VP3 OPAMP_SEC_NONINVERTINGINPUT_IO3
+
+#define OPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0
+#define OPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1
+
+#define IOPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0
+#define IOPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1
+
+#define OPAMP_SEC_INVERTINGINPUT_VM0 OPAMP_SEC_INVERTINGINPUT_IO0
+#define OPAMP_SEC_INVERTINGINPUT_VM1 OPAMP_SEC_INVERTINGINPUT_IO1
+
+#define OPAMP_INVERTINGINPUT_VINM OPAMP_SEC_INVERTINGINPUT_IO1
+
+#define OPAMP_PGACONNECT_NO OPAMP_PGA_CONNECT_INVERTINGINPUT_NO
+#define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0
+#define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS
+/**
+ * @}
+ */
+
+/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+/* Compact Flash-ATA registers description */
+#define CF_DATA ATA_DATA
+#define CF_SECTOR_COUNT ATA_SECTOR_COUNT
+#define CF_SECTOR_NUMBER ATA_SECTOR_NUMBER
+#define CF_CYLINDER_LOW ATA_CYLINDER_LOW
+#define CF_CYLINDER_HIGH ATA_CYLINDER_HIGH
+#define CF_CARD_HEAD ATA_CARD_HEAD
+#define CF_STATUS_CMD ATA_STATUS_CMD
+#define CF_STATUS_CMD_ALTERNATE ATA_STATUS_CMD_ALTERNATE
+#define CF_COMMON_DATA_AREA ATA_COMMON_DATA_AREA
+
+/* Compact Flash-ATA commands */
+#define CF_READ_SECTOR_CMD ATA_READ_SECTOR_CMD
+#define CF_WRITE_SECTOR_CMD ATA_WRITE_SECTOR_CMD
+#define CF_ERASE_SECTOR_CMD ATA_ERASE_SECTOR_CMD
+#define CF_IDENTIFY_CMD ATA_IDENTIFY_CMD
+
+#define PCCARD_StatusTypedef HAL_PCCARD_StatusTypeDef
+#define PCCARD_SUCCESS HAL_PCCARD_STATUS_SUCCESS
+#define PCCARD_ONGOING HAL_PCCARD_STATUS_ONGOING
+#define PCCARD_ERROR HAL_PCCARD_STATUS_ERROR
+#define PCCARD_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT
+/**
+ * @}
+ */
+
+/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define FORMAT_BIN RTC_FORMAT_BIN
+#define FORMAT_BCD RTC_FORMAT_BCD
+
+#define RTC_ALARMSUBSECONDMASK_None RTC_ALARMSUBSECONDMASK_NONE
+#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE
+#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE
+#define RTC_TAMPERMASK_FLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE
+#define RTC_TAMPERMASK_FLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE
+
+#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE
+#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE
+#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE
+#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE
+#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE
+#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE
+#define RTC_TAMPER1_2_INTERRUPT RTC_ALL_TAMPER_INTERRUPT
+#define RTC_TAMPER1_2_3_INTERRUPT RTC_ALL_TAMPER_INTERRUPT
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define SMARTCARD_NACK_ENABLED SMARTCARD_NACK_ENABLE
+#define SMARTCARD_NACK_DISABLED SMARTCARD_NACK_DISABLE
+
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLED SMARTCARD_ONE_BIT_SAMPLE_DISABLE
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLED SMARTCARD_ONE_BIT_SAMPLE_ENABLE
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLE SMARTCARD_ONE_BIT_SAMPLE_DISABLE
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLE SMARTCARD_ONE_BIT_SAMPLE_ENABLE
+
+#define SMARTCARD_TIMEOUT_DISABLED SMARTCARD_TIMEOUT_DISABLE
+#define SMARTCARD_TIMEOUT_ENABLED SMARTCARD_TIMEOUT_ENABLE
+
+#define SMARTCARD_LASTBIT_DISABLED SMARTCARD_LASTBIT_DISABLE
+#define SMARTCARD_LASTBIT_ENABLED SMARTCARD_LASTBIT_ENABLE
+/**
+ * @}
+ */
+
+
+ /** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define SMBUS_DUALADDRESS_DISABLED SMBUS_DUALADDRESS_DISABLE
+#define SMBUS_DUALADDRESS_ENABLED SMBUS_DUALADDRESS_ENABLE
+#define SMBUS_GENERALCALL_DISABLED SMBUS_GENERALCALL_DISABLE
+#define SMBUS_GENERALCALL_ENABLED SMBUS_GENERALCALL_ENABLE
+#define SMBUS_NOSTRETCH_DISABLED SMBUS_NOSTRETCH_DISABLE
+#define SMBUS_NOSTRETCH_ENABLED SMBUS_NOSTRETCH_ENABLE
+#define SMBUS_ANALOGFILTER_ENABLED SMBUS_ANALOGFILTER_ENABLE
+#define SMBUS_ANALOGFILTER_DISABLED SMBUS_ANALOGFILTER_DISABLE
+#define HAL_SMBUS_STATE_SLAVE_LISTEN HAL_SMBUS_STATE_LISTEN
+/**
+ * @}
+ */
+
+ /** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define SPI_TIMODE_DISABLED SPI_TIMODE_DISABLE
+#define SPI_TIMODE_ENABLED SPI_TIMODE_ENABLE
+
+#define SPI_CRCCALCULATION_DISABLED SPI_CRCCALCULATION_DISABLE
+#define SPI_CRCCALCULATION_ENABLED SPI_CRCCALCULATION_ENABLE
+
+#define SPI_NSS_PULSE_DISABLED SPI_NSS_PULSE_DISABLE
+#define SPI_NSS_PULSE_ENABLED SPI_NSS_PULSE_ENABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define CCER_CCxE_MASK TIM_CCER_CCxE_MASK
+#define CCER_CCxNE_MASK TIM_CCER_CCxNE_MASK
+
+#define TIM_DMABase_CR1 TIM_DMABASE_CR1
+#define TIM_DMABase_CR2 TIM_DMABASE_CR2
+#define TIM_DMABase_SMCR TIM_DMABASE_SMCR
+#define TIM_DMABase_DIER TIM_DMABASE_DIER
+#define TIM_DMABase_SR TIM_DMABASE_SR
+#define TIM_DMABase_EGR TIM_DMABASE_EGR
+#define TIM_DMABase_CCMR1 TIM_DMABASE_CCMR1
+#define TIM_DMABase_CCMR2 TIM_DMABASE_CCMR2
+#define TIM_DMABase_CCER TIM_DMABASE_CCER
+#define TIM_DMABase_CNT TIM_DMABASE_CNT
+#define TIM_DMABase_PSC TIM_DMABASE_PSC
+#define TIM_DMABase_ARR TIM_DMABASE_ARR
+#define TIM_DMABase_RCR TIM_DMABASE_RCR
+#define TIM_DMABase_CCR1 TIM_DMABASE_CCR1
+#define TIM_DMABase_CCR2 TIM_DMABASE_CCR2
+#define TIM_DMABase_CCR3 TIM_DMABASE_CCR3
+#define TIM_DMABase_CCR4 TIM_DMABASE_CCR4
+#define TIM_DMABase_BDTR TIM_DMABASE_BDTR
+#define TIM_DMABase_DCR TIM_DMABASE_DCR
+#define TIM_DMABase_DMAR TIM_DMABASE_DMAR
+#define TIM_DMABase_OR1 TIM_DMABASE_OR1
+#define TIM_DMABase_CCMR3 TIM_DMABASE_CCMR3
+#define TIM_DMABase_CCR5 TIM_DMABASE_CCR5
+#define TIM_DMABase_CCR6 TIM_DMABASE_CCR6
+#define TIM_DMABase_OR2 TIM_DMABASE_OR2
+#define TIM_DMABase_OR3 TIM_DMABASE_OR3
+#define TIM_DMABase_OR TIM_DMABASE_OR
+
+#define TIM_EventSource_Update TIM_EVENTSOURCE_UPDATE
+#define TIM_EventSource_CC1 TIM_EVENTSOURCE_CC1
+#define TIM_EventSource_CC2 TIM_EVENTSOURCE_CC2
+#define TIM_EventSource_CC3 TIM_EVENTSOURCE_CC3
+#define TIM_EventSource_CC4 TIM_EVENTSOURCE_CC4
+#define TIM_EventSource_COM TIM_EVENTSOURCE_COM
+#define TIM_EventSource_Trigger TIM_EVENTSOURCE_TRIGGER
+#define TIM_EventSource_Break TIM_EVENTSOURCE_BREAK
+#define TIM_EventSource_Break2 TIM_EVENTSOURCE_BREAK2
+
+#define TIM_DMABurstLength_1Transfer TIM_DMABURSTLENGTH_1TRANSFER
+#define TIM_DMABurstLength_2Transfers TIM_DMABURSTLENGTH_2TRANSFERS
+#define TIM_DMABurstLength_3Transfers TIM_DMABURSTLENGTH_3TRANSFERS
+#define TIM_DMABurstLength_4Transfers TIM_DMABURSTLENGTH_4TRANSFERS
+#define TIM_DMABurstLength_5Transfers TIM_DMABURSTLENGTH_5TRANSFERS
+#define TIM_DMABurstLength_6Transfers TIM_DMABURSTLENGTH_6TRANSFERS
+#define TIM_DMABurstLength_7Transfers TIM_DMABURSTLENGTH_7TRANSFERS
+#define TIM_DMABurstLength_8Transfers TIM_DMABURSTLENGTH_8TRANSFERS
+#define TIM_DMABurstLength_9Transfers TIM_DMABURSTLENGTH_9TRANSFERS
+#define TIM_DMABurstLength_10Transfers TIM_DMABURSTLENGTH_10TRANSFERS
+#define TIM_DMABurstLength_11Transfers TIM_DMABURSTLENGTH_11TRANSFERS
+#define TIM_DMABurstLength_12Transfers TIM_DMABURSTLENGTH_12TRANSFERS
+#define TIM_DMABurstLength_13Transfers TIM_DMABURSTLENGTH_13TRANSFERS
+#define TIM_DMABurstLength_14Transfers TIM_DMABURSTLENGTH_14TRANSFERS
+#define TIM_DMABurstLength_15Transfers TIM_DMABURSTLENGTH_15TRANSFERS
+#define TIM_DMABurstLength_16Transfers TIM_DMABURSTLENGTH_16TRANSFERS
+#define TIM_DMABurstLength_17Transfers TIM_DMABURSTLENGTH_17TRANSFERS
+#define TIM_DMABurstLength_18Transfers TIM_DMABURSTLENGTH_18TRANSFERS
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define TSC_SYNC_POL_FALL TSC_SYNC_POLARITY_FALLING
+#define TSC_SYNC_POL_RISE_HIGH TSC_SYNC_POLARITY_RISING
+/**
+ * @}
+ */
+
+/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define UART_ONEBIT_SAMPLING_DISABLED UART_ONE_BIT_SAMPLE_DISABLE
+#define UART_ONEBIT_SAMPLING_ENABLED UART_ONE_BIT_SAMPLE_ENABLE
+#define UART_ONE_BIT_SAMPLE_DISABLED UART_ONE_BIT_SAMPLE_DISABLE
+#define UART_ONE_BIT_SAMPLE_ENABLED UART_ONE_BIT_SAMPLE_ENABLE
+
+#define __HAL_UART_ONEBIT_ENABLE __HAL_UART_ONE_BIT_SAMPLE_ENABLE
+#define __HAL_UART_ONEBIT_DISABLE __HAL_UART_ONE_BIT_SAMPLE_DISABLE
+
+#define __DIV_SAMPLING16 UART_DIV_SAMPLING16
+#define __DIVMANT_SAMPLING16 UART_DIVMANT_SAMPLING16
+#define __DIVFRAQ_SAMPLING16 UART_DIVFRAQ_SAMPLING16
+#define __UART_BRR_SAMPLING16 UART_BRR_SAMPLING16
+
+#define __DIV_SAMPLING8 UART_DIV_SAMPLING8
+#define __DIVMANT_SAMPLING8 UART_DIVMANT_SAMPLING8
+#define __DIVFRAQ_SAMPLING8 UART_DIVFRAQ_SAMPLING8
+#define __UART_BRR_SAMPLING8 UART_BRR_SAMPLING8
+
+#define UART_WAKEUPMETHODE_IDLELINE UART_WAKEUPMETHOD_IDLELINE
+#define UART_WAKEUPMETHODE_ADDRESSMARK UART_WAKEUPMETHOD_ADDRESSMARK
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define USART_CLOCK_DISABLED USART_CLOCK_DISABLE
+#define USART_CLOCK_ENABLED USART_CLOCK_ENABLE
+
+#define USARTNACK_ENABLED USART_NACK_ENABLE
+#define USARTNACK_DISABLED USART_NACK_DISABLE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define CFR_BASE WWDG_CFR_BASE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose
+ * @{
+ */
+#define CAN_FilterFIFO0 CAN_FILTER_FIFO0
+#define CAN_FilterFIFO1 CAN_FILTER_FIFO1
+#define CAN_IT_RQCP0 CAN_IT_TME
+#define CAN_IT_RQCP1 CAN_IT_TME
+#define CAN_IT_RQCP2 CAN_IT_TME
+#define INAK_TIMEOUT CAN_TIMEOUT_VALUE
+#define SLAK_TIMEOUT CAN_TIMEOUT_VALUE
+#define CAN_TXSTATUS_FAILED ((uint8_t)0x00)
+#define CAN_TXSTATUS_OK ((uint8_t)0x01)
+#define CAN_TXSTATUS_PENDING ((uint8_t)0x02)
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+#define VLAN_TAG ETH_VLAN_TAG
+#define MIN_ETH_PAYLOAD ETH_MIN_ETH_PAYLOAD
+#define MAX_ETH_PAYLOAD ETH_MAX_ETH_PAYLOAD
+#define JUMBO_FRAME_PAYLOAD ETH_JUMBO_FRAME_PAYLOAD
+#define MACMIIAR_CR_MASK ETH_MACMIIAR_CR_MASK
+#define MACCR_CLEAR_MASK ETH_MACCR_CLEAR_MASK
+#define MACFCR_CLEAR_MASK ETH_MACFCR_CLEAR_MASK
+#define DMAOMR_CLEAR_MASK ETH_DMAOMR_CLEAR_MASK
+
+#define ETH_MMCCR ((uint32_t)0x00000100)
+#define ETH_MMCRIR ((uint32_t)0x00000104)
+#define ETH_MMCTIR ((uint32_t)0x00000108)
+#define ETH_MMCRIMR ((uint32_t)0x0000010C)
+#define ETH_MMCTIMR ((uint32_t)0x00000110)
+#define ETH_MMCTGFSCCR ((uint32_t)0x0000014C)
+#define ETH_MMCTGFMSCCR ((uint32_t)0x00000150)
+#define ETH_MMCTGFCR ((uint32_t)0x00000168)
+#define ETH_MMCRFCECR ((uint32_t)0x00000194)
+#define ETH_MMCRFAECR ((uint32_t)0x00000198)
+#define ETH_MMCRGUFCR ((uint32_t)0x000001C4)
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_CRYP_ComputationCpltCallback HAL_CRYPEx_ComputationCpltCallback
+/**
+ * @}
+ */
+
+/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose
+ * @{
+ */
+
+#define HAL_HMAC_MD5_Finish HAL_HASH_MD5_Finish
+#define HAL_HMAC_SHA1_Finish HAL_HASH_SHA1_Finish
+#define HAL_HMAC_SHA224_Finish HAL_HASH_SHA224_Finish
+#define HAL_HMAC_SHA256_Finish HAL_HASH_SHA256_Finish
+
+/*HASH Algorithm Selection*/
+
+#define HASH_AlgoSelection_SHA1 HASH_ALGOSELECTION_SHA1
+#define HASH_AlgoSelection_SHA224 HASH_ALGOSELECTION_SHA224
+#define HASH_AlgoSelection_SHA256 HASH_ALGOSELECTION_SHA256
+#define HASH_AlgoSelection_MD5 HASH_ALGOSELECTION_MD5
+
+#define HASH_AlgoMode_HASH HASH_ALGOMODE_HASH
+#define HASH_AlgoMode_HMAC HASH_ALGOMODE_HMAC
+
+#define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY
+#define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode
+#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode
+#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode
+#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode
+#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode
+#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode
+#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph))
+#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect
+#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT())
+#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT())
+#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT())
+#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor())
+/**
+ * @}
+ */
+
+/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define FLASH_HalfPageProgram HAL_FLASHEx_HalfPageProgram
+#define FLASH_EnableRunPowerDown HAL_FLASHEx_EnableRunPowerDown
+#define FLASH_DisableRunPowerDown HAL_FLASHEx_DisableRunPowerDown
+#define HAL_DATA_EEPROMEx_Unlock HAL_FLASHEx_DATAEEPROM_Unlock
+#define HAL_DATA_EEPROMEx_Lock HAL_FLASHEx_DATAEEPROM_Lock
+#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase
+#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program
+
+ /**
+ * @}
+ */
+
+/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_I2CEx_AnalogFilter_Config HAL_I2CEx_ConfigAnalogFilter
+#define HAL_I2CEx_DigitalFilter_Config HAL_I2CEx_ConfigDigitalFilter
+
+#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus))
+ /**
+ * @}
+ */
+
+/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose
+ * @{
+ */
+#define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD
+#define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg
+#define HAL_PWR_DisableFlashPowerDown HAL_PWREx_DisableFlashPowerDown
+#define HAL_PWR_DisableVddio2Monitor HAL_PWREx_DisableVddio2Monitor
+#define HAL_PWR_EnableBkUpReg HAL_PWREx_EnableBkUpReg
+#define HAL_PWR_EnableFlashPowerDown HAL_PWREx_EnableFlashPowerDown
+#define HAL_PWR_EnableVddio2Monitor HAL_PWREx_EnableVddio2Monitor
+#define HAL_PWR_PVD_PVM_IRQHandler HAL_PWREx_PVD_PVM_IRQHandler
+#define HAL_PWR_PVDLevelConfig HAL_PWR_ConfigPVD
+#define HAL_PWR_Vddio2Monitor_IRQHandler HAL_PWREx_Vddio2Monitor_IRQHandler
+#define HAL_PWR_Vddio2MonitorCallback HAL_PWREx_Vddio2MonitorCallback
+#define HAL_PWREx_ActivateOverDrive HAL_PWREx_EnableOverDrive
+#define HAL_PWREx_DeactivateOverDrive HAL_PWREx_DisableOverDrive
+#define HAL_PWREx_DisableSDADCAnalog HAL_PWREx_DisableSDADC
+#define HAL_PWREx_EnableSDADCAnalog HAL_PWREx_EnableSDADC
+#define HAL_PWREx_PVMConfig HAL_PWREx_ConfigPVM
+
+#define PWR_MODE_NORMAL PWR_PVD_MODE_NORMAL
+#define PWR_MODE_IT_RISING PWR_PVD_MODE_IT_RISING
+#define PWR_MODE_IT_FALLING PWR_PVD_MODE_IT_FALLING
+#define PWR_MODE_IT_RISING_FALLING PWR_PVD_MODE_IT_RISING_FALLING
+#define PWR_MODE_EVENT_RISING PWR_PVD_MODE_EVENT_RISING
+#define PWR_MODE_EVENT_FALLING PWR_PVD_MODE_EVENT_FALLING
+#define PWR_MODE_EVENT_RISING_FALLING PWR_PVD_MODE_EVENT_RISING_FALLING
+
+#define CR_OFFSET_BB PWR_CR_OFFSET_BB
+#define CSR_OFFSET_BB PWR_CSR_OFFSET_BB
+
+#define DBP_BitNumber DBP_BIT_NUMBER
+#define PVDE_BitNumber PVDE_BIT_NUMBER
+#define PMODE_BitNumber PMODE_BIT_NUMBER
+#define EWUP_BitNumber EWUP_BIT_NUMBER
+#define FPDS_BitNumber FPDS_BIT_NUMBER
+#define ODEN_BitNumber ODEN_BIT_NUMBER
+#define ODSWEN_BitNumber ODSWEN_BIT_NUMBER
+#define MRLVDS_BitNumber MRLVDS_BIT_NUMBER
+#define LPLVDS_BitNumber LPLVDS_BIT_NUMBER
+#define BRE_BitNumber BRE_BIT_NUMBER
+
+#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL
+
+#define IS_PWR_REGULATOR_VOLTAGE IS_PWR_VOLTAGE_SCALING_RANGE
+ /**
+ * @}
+ */
+
+/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_SMBUS_Slave_Listen_IT HAL_SMBUS_EnableListen_IT
+#define HAL_SMBUS_SlaveAddrCallback HAL_SMBUS_AddrCallback
+#define HAL_SMBUS_SlaveListenCpltCallback HAL_SMBUS_ListenCpltCallback
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_SPI_FlushRxFifo HAL_SPIEx_FlushRxFifo
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_TIM_DMADelayPulseCplt TIM_DMADelayPulseCplt
+#define HAL_TIM_DMAError TIM_DMAError
+#define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt
+#define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt
+/**
+ * @}
+ */
+
+/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose
+ * @{
+ */
+#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback
+/**
+ * @}
+ */
+
+
+ /** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros ------------------------------------------------------------*/
+
+/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define AES_IT_CC CRYP_IT_CC
+#define AES_IT_ERR CRYP_IT_ERR
+#define AES_FLAG_CCF CRYP_FLAG_CCF
+/**
+ * @}
+ */
+
+/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_GET_BOOT_MODE __HAL_SYSCFG_GET_BOOT_MODE
+#define __HAL_REMAPMEMORY_FLASH __HAL_SYSCFG_REMAPMEMORY_FLASH
+#define __HAL_REMAPMEMORY_SYSTEMFLASH __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH
+#define __HAL_REMAPMEMORY_SRAM __HAL_SYSCFG_REMAPMEMORY_SRAM
+#define __HAL_REMAPMEMORY_FMC __HAL_SYSCFG_REMAPMEMORY_FMC
+#define __HAL_REMAPMEMORY_FMC_SDRAM __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM
+#define __HAL_REMAPMEMORY_FSMC __HAL_SYSCFG_REMAPMEMORY_FSMC
+#define __HAL_REMAPMEMORY_QUADSPI __HAL_SYSCFG_REMAPMEMORY_QUADSPI
+#define __HAL_FMC_BANK __HAL_SYSCFG_FMC_BANK
+#define __HAL_GET_FLAG __HAL_SYSCFG_GET_FLAG
+#define __HAL_CLEAR_FLAG __HAL_SYSCFG_CLEAR_FLAG
+#define __HAL_VREFINT_OUT_ENABLE __HAL_SYSCFG_VREFINT_OUT_ENABLE
+#define __HAL_VREFINT_OUT_DISABLE __HAL_SYSCFG_VREFINT_OUT_DISABLE
+
+#define SYSCFG_FLAG_VREF_READY SYSCFG_FLAG_VREFINT_READY
+#define SYSCFG_FLAG_RC48 RCC_FLAG_HSI48
+#define IS_SYSCFG_FASTMODEPLUS_CONFIG IS_I2C_FASTMODEPLUS
+#define UFB_MODE_BitNumber UFB_MODE_BIT_NUMBER
+#define CMP_PD_BitNumber CMP_PD_BIT_NUMBER
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __ADC_ENABLE __HAL_ADC_ENABLE
+#define __ADC_DISABLE __HAL_ADC_DISABLE
+#define __HAL_ADC_ENABLING_CONDITIONS ADC_ENABLING_CONDITIONS
+#define __HAL_ADC_DISABLING_CONDITIONS ADC_DISABLING_CONDITIONS
+#define __HAL_ADC_IS_ENABLED ADC_IS_ENABLE
+#define __ADC_IS_ENABLED ADC_IS_ENABLE
+#define __HAL_ADC_IS_SOFTWARE_START_REGULAR ADC_IS_SOFTWARE_START_REGULAR
+#define __HAL_ADC_IS_SOFTWARE_START_INJECTED ADC_IS_SOFTWARE_START_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR ADC_IS_CONVERSION_ONGOING_REGULAR
+#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED ADC_IS_CONVERSION_ONGOING_INJECTED
+#define __HAL_ADC_IS_CONVERSION_ONGOING ADC_IS_CONVERSION_ONGOING
+#define __HAL_ADC_CLEAR_ERRORCODE ADC_CLEAR_ERRORCODE
+
+#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION
+#define __HAL_ADC_JSQR_RK ADC_JSQR_RK
+#define __HAL_ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_SHIFT
+#define __HAL_ADC_CFGR_AWD23CR ADC_CFGR_AWD23CR
+#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION ADC_CFGR_INJECT_AUTO_CONVERSION
+#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE ADC_CFGR_INJECT_CONTEXT_QUEUE
+#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS ADC_CFGR_INJECT_DISCCONTINUOUS
+#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS ADC_CFGR_REG_DISCCONTINUOUS
+#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM ADC_CFGR_DISCONTINUOUS_NUM
+#define __HAL_ADC_CFGR_AUTOWAIT ADC_CFGR_AUTOWAIT
+#define __HAL_ADC_CFGR_CONTINUOUS ADC_CFGR_CONTINUOUS
+#define __HAL_ADC_CFGR_OVERRUN ADC_CFGR_OVERRUN
+#define __HAL_ADC_CFGR_DMACONTREQ ADC_CFGR_DMACONTREQ
+#define __HAL_ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_SET
+#define __HAL_ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_SET
+#define __HAL_ADC_OFR_CHANNEL ADC_OFR_CHANNEL
+#define __HAL_ADC_DIFSEL_CHANNEL ADC_DIFSEL_CHANNEL
+#define __HAL_ADC_CALFACT_DIFF_SET ADC_CALFACT_DIFF_SET
+#define __HAL_ADC_CALFACT_DIFF_GET ADC_CALFACT_DIFF_GET
+#define __HAL_ADC_TRX_HIGHTHRESHOLD ADC_TRX_HIGHTHRESHOLD
+
+#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION ADC_OFFSET_SHIFT_RESOLUTION
+#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION ADC_AWD1THRESHOLD_SHIFT_RESOLUTION
+#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION ADC_AWD23THRESHOLD_SHIFT_RESOLUTION
+#define __HAL_ADC_COMMON_REGISTER ADC_COMMON_REGISTER
+#define __HAL_ADC_COMMON_CCR_MULTI ADC_COMMON_CCR_MULTI
+#define __HAL_ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE
+#define __ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE
+#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER ADC_NONMULTIMODE_OR_MULTIMODEMASTER
+#define __HAL_ADC_COMMON_ADC_OTHER ADC_COMMON_ADC_OTHER
+#define __HAL_ADC_MULTI_SLAVE ADC_MULTI_SLAVE
+
+#define __HAL_ADC_SQR1_L ADC_SQR1_L_SHIFT
+#define __HAL_ADC_JSQR_JL ADC_JSQR_JL_SHIFT
+#define __HAL_ADC_JSQR_RK_JL ADC_JSQR_RK_JL
+#define __HAL_ADC_CR1_DISCONTINUOUS_NUM ADC_CR1_DISCONTINUOUS_NUM
+#define __HAL_ADC_CR1_SCAN ADC_CR1_SCAN_SET
+#define __HAL_ADC_CONVCYCLES_MAX_RANGE ADC_CONVCYCLES_MAX_RANGE
+#define __HAL_ADC_CLOCK_PRESCALER_RANGE ADC_CLOCK_PRESCALER_RANGE
+#define __HAL_ADC_GET_CLOCK_PRESCALER ADC_GET_CLOCK_PRESCALER
+
+#define __HAL_ADC_SQR1 ADC_SQR1
+#define __HAL_ADC_SMPR1 ADC_SMPR1
+#define __HAL_ADC_SMPR2 ADC_SMPR2
+#define __HAL_ADC_SQR3_RK ADC_SQR3_RK
+#define __HAL_ADC_SQR2_RK ADC_SQR2_RK
+#define __HAL_ADC_SQR1_RK ADC_SQR1_RK
+#define __HAL_ADC_CR2_CONTINUOUS ADC_CR2_CONTINUOUS
+#define __HAL_ADC_CR1_DISCONTINUOUS ADC_CR1_DISCONTINUOUS
+#define __HAL_ADC_CR1_SCANCONV ADC_CR1_SCANCONV
+#define __HAL_ADC_CR2_EOCSelection ADC_CR2_EOCSelection
+#define __HAL_ADC_CR2_DMAContReq ADC_CR2_DMAContReq
+#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION
+#define __HAL_ADC_JSQR ADC_JSQR
+
+#define __HAL_ADC_CHSELR_CHANNEL ADC_CHSELR_CHANNEL
+#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS ADC_CFGR1_REG_DISCCONTINUOUS
+#define __HAL_ADC_CFGR1_AUTOOFF ADC_CFGR1_AUTOOFF
+#define __HAL_ADC_CFGR1_AUTOWAIT ADC_CFGR1_AUTOWAIT
+#define __HAL_ADC_CFGR1_CONTINUOUS ADC_CFGR1_CONTINUOUS
+#define __HAL_ADC_CFGR1_OVERRUN ADC_CFGR1_OVERRUN
+#define __HAL_ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR
+#define __HAL_ADC_CFGR1_DMACONTREQ ADC_CFGR1_DMACONTREQ
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_DHR12R1_ALIGNEMENT DAC_DHR12R1_ALIGNMENT
+#define __HAL_DHR12R2_ALIGNEMENT DAC_DHR12R2_ALIGNMENT
+#define __HAL_DHR12RD_ALIGNEMENT DAC_DHR12RD_ALIGNMENT
+#define IS_DAC_GENERATE_WAVE IS_DAC_WAVE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1
+#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1
+#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2
+#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2
+#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3
+#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3
+#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4
+#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4
+#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5
+#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5
+#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6
+#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6
+#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7
+#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7
+#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8
+#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8
+
+#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9
+#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9
+#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10
+#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10
+#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11
+#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11
+#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12
+#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12
+#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13
+#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13
+#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14
+#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14
+#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2
+#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2
+
+
+#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15
+#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15
+#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16
+#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16
+#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17
+#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17
+#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC
+#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC
+#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG
+#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG
+#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG
+#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG
+#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT
+#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT
+#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT
+#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT
+#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT
+#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT
+#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1
+#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1
+#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1
+#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1
+#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2
+#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE())
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_ENABLE_IT())
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
+ __HAL_COMP_COMP2_EXTI_DISABLE_IT())
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_GET_FLAG())
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
+ __HAL_COMP_COMP2_EXTI_CLEAR_FLAG())
+#define __HAL_COMP_GET_EXTI_LINE COMP_GET_EXTI_LINE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \
+ ((WAVE) == DAC_WAVE_NOISE)|| \
+ ((WAVE) == DAC_WAVE_TRIANGLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define IS_WRPAREA IS_OB_WRPAREA
+#define IS_TYPEPROGRAM IS_FLASH_TYPEPROGRAM
+#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM
+#define IS_TYPEERASE IS_FLASH_TYPEERASE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_I2C_RESET_CR2 I2C_RESET_CR2
+#define __HAL_I2C_GENERATE_START I2C_GENERATE_START
+#define __HAL_I2C_FREQ_RANGE I2C_FREQ_RANGE
+#define __HAL_I2C_RISE_TIME I2C_RISE_TIME
+#define __HAL_I2C_SPEED_STANDARD I2C_SPEED_STANDARD
+#define __HAL_I2C_SPEED_FAST I2C_SPEED_FAST
+#define __HAL_I2C_SPEED I2C_SPEED
+#define __HAL_I2C_7BIT_ADD_WRITE I2C_7BIT_ADD_WRITE
+#define __HAL_I2C_7BIT_ADD_READ I2C_7BIT_ADD_READ
+#define __HAL_I2C_10BIT_ADDRESS I2C_10BIT_ADDRESS
+#define __HAL_I2C_10BIT_HEADER_WRITE I2C_10BIT_HEADER_WRITE
+#define __HAL_I2C_10BIT_HEADER_READ I2C_10BIT_HEADER_READ
+#define __HAL_I2C_MEM_ADD_MSB I2C_MEM_ADD_MSB
+#define __HAL_I2C_MEM_ADD_LSB I2C_MEM_ADD_LSB
+#define __HAL_I2C_FREQRANGE I2C_FREQRANGE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define IS_I2S_INSTANCE IS_I2S_ALL_INSTANCE
+#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __IRDA_DISABLE __HAL_IRDA_DISABLE
+#define __IRDA_ENABLE __HAL_IRDA_ENABLE
+
+#define __HAL_IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE
+#define __HAL_IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION
+#define __IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE
+#define __IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION
+
+#define IS_IRDA_ONEBIT_SAMPLE IS_IRDA_ONE_BIT_SAMPLE
+
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_IWDG_ENABLE_WRITE_ACCESS IWDG_ENABLE_WRITE_ACCESS
+#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_LPTIM_ENABLE_INTERRUPT __HAL_LPTIM_ENABLE_IT
+#define __HAL_LPTIM_DISABLE_INTERRUPT __HAL_LPTIM_DISABLE_IT
+#define __HAL_LPTIM_GET_ITSTATUS __HAL_LPTIM_GET_IT_SOURCE
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __OPAMP_CSR_OPAXPD OPAMP_CSR_OPAXPD
+#define __OPAMP_CSR_S3SELX OPAMP_CSR_S3SELX
+#define __OPAMP_CSR_S4SELX OPAMP_CSR_S4SELX
+#define __OPAMP_CSR_S5SELX OPAMP_CSR_S5SELX
+#define __OPAMP_CSR_S6SELX OPAMP_CSR_S6SELX
+#define __OPAMP_CSR_OPAXCAL_L OPAMP_CSR_OPAXCAL_L
+#define __OPAMP_CSR_OPAXCAL_H OPAMP_CSR_OPAXCAL_H
+#define __OPAMP_CSR_OPAXLPM OPAMP_CSR_OPAXLPM
+#define __OPAMP_CSR_ALL_SWITCHES OPAMP_CSR_ALL_SWITCHES
+#define __OPAMP_CSR_ANAWSELX OPAMP_CSR_ANAWSELX
+#define __OPAMP_CSR_OPAXCALOUT OPAMP_CSR_OPAXCALOUT
+#define __OPAMP_OFFSET_TRIM_BITSPOSITION OPAMP_OFFSET_TRIM_BITSPOSITION
+#define __OPAMP_OFFSET_TRIM_SET OPAMP_OFFSET_TRIM_SET
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_PVD_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT
+#define __HAL_PVD_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT
+#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
+#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PVM_EVENT_DISABLE __HAL_PWR_PVM_EVENT_DISABLE
+#define __HAL_PVM_EVENT_ENABLE __HAL_PWR_PVM_EVENT_ENABLE
+#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE
+#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE
+#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE
+#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE
+#define __HAL_PWR_INTERNALWAKEUP_DISABLE HAL_PWREx_DisableInternalWakeUpLine
+#define __HAL_PWR_INTERNALWAKEUP_ENABLE HAL_PWREx_EnableInternalWakeUpLine
+#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE HAL_PWREx_DisablePullUpPullDownConfig
+#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE HAL_PWREx_EnablePullUpPullDownConfig
+#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE()
+#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT
+#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT
+#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
+#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
+#define __HAL_PWR_PVM_DISABLE() HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2();HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4()
+#define __HAL_PWR_PVM_ENABLE() HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2();HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4()
+#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE HAL_PWREx_DisableSRAM2ContentRetention
+#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE HAL_PWREx_EnableSRAM2ContentRetention
+#define __HAL_PWR_VDDIO2_DISABLE HAL_PWREx_DisableVddIO2
+#define __HAL_PWR_VDDIO2_ENABLE HAL_PWREx_EnableVddIO2
+#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE
+#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_PWR_VDDUSB_DISABLE HAL_PWREx_DisableVddUSB
+#define __HAL_PWR_VDDUSB_ENABLE HAL_PWREx_EnableVddUSB
+
+#if defined (STM32F4)
+#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_ENABLE_IT()
+#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_DISABLE_IT()
+#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GET_FLAG()
+#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_CLEAR_FLAG()
+#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GENERATE_SWIT()
+#else
+#define __HAL_PVD_EXTI_CLEAR_FLAG __HAL_PWR_PVD_EXTI_CLEAR_FLAG
+#define __HAL_PVD_EXTI_DISABLE_IT __HAL_PWR_PVD_EXTI_DISABLE_IT
+#define __HAL_PVD_EXTI_ENABLE_IT __HAL_PWR_PVD_EXTI_ENABLE_IT
+#define __HAL_PVD_EXTI_GENERATE_SWIT __HAL_PWR_PVD_EXTI_GENERATE_SWIT
+#define __HAL_PVD_EXTI_GET_FLAG __HAL_PWR_PVD_EXTI_GET_FLAG
+#endif /* STM32F4 */
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose
+ * @{
+ */
+
+#define RCC_StopWakeUpClock_MSI RCC_STOP_WAKEUPCLOCK_MSI
+#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI
+
+#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback
+#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT())
+
+#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE
+#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE
+#define __ADC_CLK_SLEEP_DISABLE __HAL_RCC_ADC_CLK_SLEEP_DISABLE
+#define __ADC_CLK_SLEEP_ENABLE __HAL_RCC_ADC_CLK_SLEEP_ENABLE
+#define __ADC_FORCE_RESET __HAL_RCC_ADC_FORCE_RESET
+#define __ADC_RELEASE_RESET __HAL_RCC_ADC_RELEASE_RESET
+#define __ADC1_CLK_DISABLE __HAL_RCC_ADC1_CLK_DISABLE
+#define __ADC1_CLK_ENABLE __HAL_RCC_ADC1_CLK_ENABLE
+#define __ADC1_FORCE_RESET __HAL_RCC_ADC1_FORCE_RESET
+#define __ADC1_RELEASE_RESET __HAL_RCC_ADC1_RELEASE_RESET
+#define __ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC1_CLK_SLEEP_ENABLE
+#define __ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC1_CLK_SLEEP_DISABLE
+#define __ADC2_CLK_DISABLE __HAL_RCC_ADC2_CLK_DISABLE
+#define __ADC2_CLK_ENABLE __HAL_RCC_ADC2_CLK_ENABLE
+#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET
+#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET
+#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE
+#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE
+#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET
+#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET
+#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE
+#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE
+#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE
+#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE
+#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET
+#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET
+#define __CRYP_CLK_SLEEP_ENABLE __HAL_RCC_CRYP_CLK_SLEEP_ENABLE
+#define __CRYP_CLK_SLEEP_DISABLE __HAL_RCC_CRYP_CLK_SLEEP_DISABLE
+#define __CRYP_CLK_ENABLE __HAL_RCC_CRYP_CLK_ENABLE
+#define __CRYP_CLK_DISABLE __HAL_RCC_CRYP_CLK_DISABLE
+#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET
+#define __CRYP_RELEASE_RESET __HAL_RCC_CRYP_RELEASE_RESET
+#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE
+#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE
+#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET
+#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET
+#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET
+#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET
+#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET
+#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET
+#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET
+#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET
+#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET
+#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET
+#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET
+#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET
+#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET
+#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET
+#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE
+#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE
+#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET
+#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET
+#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE
+#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE
+#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE
+#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE
+#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET
+#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET
+#define __CAN_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE
+#define __CAN_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE
+#define __CAN_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET
+#define __CAN_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET
+#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE
+#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE
+#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET
+#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET
+#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE
+#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE
+#define __COMP_CLK_DISABLE __HAL_RCC_COMP_CLK_DISABLE
+#define __COMP_CLK_ENABLE __HAL_RCC_COMP_CLK_ENABLE
+#define __COMP_FORCE_RESET __HAL_RCC_COMP_FORCE_RESET
+#define __COMP_RELEASE_RESET __HAL_RCC_COMP_RELEASE_RESET
+#define __COMP_CLK_SLEEP_ENABLE __HAL_RCC_COMP_CLK_SLEEP_ENABLE
+#define __COMP_CLK_SLEEP_DISABLE __HAL_RCC_COMP_CLK_SLEEP_DISABLE
+#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET
+#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET
+#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE
+#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE
+#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE
+#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE
+#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET
+#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET
+#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE
+#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE
+#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET
+#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET
+#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE
+#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE
+#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE
+#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE
+#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET
+#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET
+#define __DBGMCU_CLK_ENABLE __HAL_RCC_DBGMCU_CLK_ENABLE
+#define __DBGMCU_CLK_DISABLE __HAL_RCC_DBGMCU_CLK_DISABLE
+#define __DBGMCU_FORCE_RESET __HAL_RCC_DBGMCU_FORCE_RESET
+#define __DBGMCU_RELEASE_RESET __HAL_RCC_DBGMCU_RELEASE_RESET
+#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE
+#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE
+#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE
+#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE
+#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET
+#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET
+#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE
+#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE
+#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE
+#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE
+#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET
+#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET
+#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE
+#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE
+#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE
+#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE
+#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET
+#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET
+#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE
+#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE
+#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET
+#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET
+#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE
+#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE
+#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE
+#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE
+#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE
+#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE
+#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE
+#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE
+#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE
+#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE
+#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET
+#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET
+#define __FLITF_CLK_DISABLE __HAL_RCC_FLITF_CLK_DISABLE
+#define __FLITF_CLK_ENABLE __HAL_RCC_FLITF_CLK_ENABLE
+#define __FLITF_FORCE_RESET __HAL_RCC_FLITF_FORCE_RESET
+#define __FLITF_RELEASE_RESET __HAL_RCC_FLITF_RELEASE_RESET
+#define __FLITF_CLK_SLEEP_ENABLE __HAL_RCC_FLITF_CLK_SLEEP_ENABLE
+#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE
+#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE
+#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE
+#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE
+#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE
+#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET
+#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET
+#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE
+#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE
+#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE
+#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE
+#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE
+#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE
+#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET
+#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET
+#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE
+#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE
+#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE
+#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE
+#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET
+#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET
+#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE
+#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE
+#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE
+#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE
+#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET
+#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET
+#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE
+#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE
+#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE
+#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE
+#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET
+#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET
+#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE
+#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE
+#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE
+#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE
+#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET
+#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET
+#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE
+#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE
+#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE
+#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE
+#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET
+#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET
+#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE
+#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE
+#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE
+#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE
+#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET
+#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET
+#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE
+#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE
+#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE
+#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE
+#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET
+#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET
+#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE
+#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE
+#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE
+#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE
+#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET
+#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET
+#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE
+#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE
+#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE
+#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE
+#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET
+#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET
+#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE
+#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE
+#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE
+#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE
+#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET
+#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET
+#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE
+#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE
+#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE
+#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE
+#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET
+#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET
+#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE
+#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE
+#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE
+#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE
+#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET
+#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET
+#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE
+#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE
+#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE
+#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE
+#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET
+#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET
+#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE
+#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE
+#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE
+#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE
+#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET
+#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET
+#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE
+#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE
+#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE
+#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE
+#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET
+#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET
+#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE
+#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE
+#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE
+#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE
+#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET
+#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET
+#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE
+#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE
+#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE
+#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE
+#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET
+#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET
+#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE
+#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE
+#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE
+#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE
+#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET
+#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET
+#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE
+#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE
+#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE
+#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE
+#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET
+#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET
+#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE
+#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE
+#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE
+#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE
+#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET
+#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET
+#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE
+#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE
+#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE
+#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE
+#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET
+#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET
+#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE
+#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE
+#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE
+#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE
+#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE
+#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE
+#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET
+#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET
+#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE
+#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE
+#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE
+#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE
+#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET
+#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET
+#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE
+#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE
+#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE
+#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE
+#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET
+#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET
+#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE
+#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE
+#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE
+#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE
+#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET
+#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET
+#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE
+#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE
+#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE
+#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE
+#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE
+#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE
+#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE
+#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE
+#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE
+#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE
+#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET
+#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET
+#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE
+#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE
+#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE
+#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE
+#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET
+#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET
+#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE
+#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE
+#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE
+#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE
+#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET
+#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET
+#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE
+#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE
+#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET
+#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET
+#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE
+#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE
+#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET
+#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET
+#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE
+#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE
+#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET
+#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET
+#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE
+#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE
+#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET
+#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET
+#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE
+#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE
+#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET
+#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET
+#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE
+#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE
+#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE
+#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE
+#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET
+#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET
+#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE
+#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE
+#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE
+#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE
+#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET
+#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET
+#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE
+#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE
+#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE
+#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE
+#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET
+#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET
+#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE
+#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE
+#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE
+#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE
+#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET
+#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET
+#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE
+#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE
+#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE
+#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE
+#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET
+#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET
+#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE
+#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE
+#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE
+#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE
+#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET
+#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET
+#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE
+#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE
+#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE
+#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE
+#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET
+#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET
+#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE
+#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE
+#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE
+#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE
+#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET
+#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET
+#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE
+#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE
+#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE
+#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE
+#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET
+#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET
+#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE
+#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE
+#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE
+#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE
+#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET
+#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET
+#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE
+#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE
+#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET
+#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET
+#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE
+#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE
+#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE
+#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE
+#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET
+#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET
+#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE
+#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE
+#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE
+#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE
+#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET
+#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET
+#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE
+#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE
+#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE
+#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE
+#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET
+#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET
+#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE
+#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE
+#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE
+#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE
+#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET
+#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET
+#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE
+#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE
+#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE
+#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE
+#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET
+#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET
+#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE
+#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE
+#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE
+#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE
+#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET
+#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET
+#define __USART4_CLK_DISABLE __HAL_RCC_USART4_CLK_DISABLE
+#define __USART4_CLK_ENABLE __HAL_RCC_USART4_CLK_ENABLE
+#define __USART4_CLK_SLEEP_ENABLE __HAL_RCC_USART4_CLK_SLEEP_ENABLE
+#define __USART4_CLK_SLEEP_DISABLE __HAL_RCC_USART4_CLK_SLEEP_DISABLE
+#define __USART4_FORCE_RESET __HAL_RCC_USART4_FORCE_RESET
+#define __USART4_RELEASE_RESET __HAL_RCC_USART4_RELEASE_RESET
+#define __USART5_CLK_DISABLE __HAL_RCC_USART5_CLK_DISABLE
+#define __USART5_CLK_ENABLE __HAL_RCC_USART5_CLK_ENABLE
+#define __USART5_CLK_SLEEP_ENABLE __HAL_RCC_USART5_CLK_SLEEP_ENABLE
+#define __USART5_CLK_SLEEP_DISABLE __HAL_RCC_USART5_CLK_SLEEP_DISABLE
+#define __USART5_FORCE_RESET __HAL_RCC_USART5_FORCE_RESET
+#define __USART5_RELEASE_RESET __HAL_RCC_USART5_RELEASE_RESET
+#define __USART7_CLK_DISABLE __HAL_RCC_USART7_CLK_DISABLE
+#define __USART7_CLK_ENABLE __HAL_RCC_USART7_CLK_ENABLE
+#define __USART7_FORCE_RESET __HAL_RCC_USART7_FORCE_RESET
+#define __USART7_RELEASE_RESET __HAL_RCC_USART7_RELEASE_RESET
+#define __USART8_CLK_DISABLE __HAL_RCC_USART8_CLK_DISABLE
+#define __USART8_CLK_ENABLE __HAL_RCC_USART8_CLK_ENABLE
+#define __USART8_FORCE_RESET __HAL_RCC_USART8_FORCE_RESET
+#define __USART8_RELEASE_RESET __HAL_RCC_USART8_RELEASE_RESET
+#define __USB_CLK_DISABLE __HAL_RCC_USB_CLK_DISABLE
+#define __USB_CLK_ENABLE __HAL_RCC_USB_CLK_ENABLE
+#define __USB_FORCE_RESET __HAL_RCC_USB_FORCE_RESET
+#define __USB_CLK_SLEEP_ENABLE __HAL_RCC_USB_CLK_SLEEP_ENABLE
+#define __USB_CLK_SLEEP_DISABLE __HAL_RCC_USB_CLK_SLEEP_DISABLE
+#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE
+#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE
+#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET
+#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE
+#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE
+#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE
+#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE
+#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET
+#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET
+#define __TIM21_CLK_ENABLE __HAL_RCC_TIM21_CLK_ENABLE
+#define __TIM21_CLK_DISABLE __HAL_RCC_TIM21_CLK_DISABLE
+#define __TIM21_FORCE_RESET __HAL_RCC_TIM21_FORCE_RESET
+#define __TIM21_RELEASE_RESET __HAL_RCC_TIM21_RELEASE_RESET
+#define __TIM21_CLK_SLEEP_ENABLE __HAL_RCC_TIM21_CLK_SLEEP_ENABLE
+#define __TIM21_CLK_SLEEP_DISABLE __HAL_RCC_TIM21_CLK_SLEEP_DISABLE
+#define __TIM22_CLK_ENABLE __HAL_RCC_TIM22_CLK_ENABLE
+#define __TIM22_CLK_DISABLE __HAL_RCC_TIM22_CLK_DISABLE
+#define __TIM22_FORCE_RESET __HAL_RCC_TIM22_FORCE_RESET
+#define __TIM22_RELEASE_RESET __HAL_RCC_TIM22_RELEASE_RESET
+#define __TIM22_CLK_SLEEP_ENABLE __HAL_RCC_TIM22_CLK_SLEEP_ENABLE
+#define __TIM22_CLK_SLEEP_DISABLE __HAL_RCC_TIM22_CLK_SLEEP_DISABLE
+#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE
+#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE
+#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE
+#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE
+#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET
+#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET
+#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE
+#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE
+
+#define __USB_OTG_FS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET
+#define __USB_OTG_FS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET
+#define __USB_OTG_FS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE
+#define __USB_OTG_FS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE
+#define __USB_OTG_HS_CLK_DISABLE __HAL_RCC_USB_OTG_HS_CLK_DISABLE
+#define __USB_OTG_HS_CLK_ENABLE __HAL_RCC_USB_OTG_HS_CLK_ENABLE
+#define __USB_OTG_HS_ULPI_CLK_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE
+#define __USB_OTG_HS_ULPI_CLK_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE
+#define __TIM9_CLK_SLEEP_ENABLE __HAL_RCC_TIM9_CLK_SLEEP_ENABLE
+#define __TIM9_CLK_SLEEP_DISABLE __HAL_RCC_TIM9_CLK_SLEEP_DISABLE
+#define __TIM10_CLK_SLEEP_ENABLE __HAL_RCC_TIM10_CLK_SLEEP_ENABLE
+#define __TIM10_CLK_SLEEP_DISABLE __HAL_RCC_TIM10_CLK_SLEEP_DISABLE
+#define __TIM11_CLK_SLEEP_ENABLE __HAL_RCC_TIM11_CLK_SLEEP_ENABLE
+#define __TIM11_CLK_SLEEP_DISABLE __HAL_RCC_TIM11_CLK_SLEEP_DISABLE
+#define __ETHMACPTP_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE
+#define __ETHMACPTP_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE
+#define __ETHMACPTP_CLK_ENABLE __HAL_RCC_ETHMACPTP_CLK_ENABLE
+#define __ETHMACPTP_CLK_DISABLE __HAL_RCC_ETHMACPTP_CLK_DISABLE
+#define __HASH_CLK_ENABLE __HAL_RCC_HASH_CLK_ENABLE
+#define __HASH_FORCE_RESET __HAL_RCC_HASH_FORCE_RESET
+#define __HASH_RELEASE_RESET __HAL_RCC_HASH_RELEASE_RESET
+#define __HASH_CLK_SLEEP_ENABLE __HAL_RCC_HASH_CLK_SLEEP_ENABLE
+#define __HASH_CLK_SLEEP_DISABLE __HAL_RCC_HASH_CLK_SLEEP_DISABLE
+#define __HASH_CLK_DISABLE __HAL_RCC_HASH_CLK_DISABLE
+#define __SPI5_CLK_ENABLE __HAL_RCC_SPI5_CLK_ENABLE
+#define __SPI5_CLK_DISABLE __HAL_RCC_SPI5_CLK_DISABLE
+#define __SPI5_FORCE_RESET __HAL_RCC_SPI5_FORCE_RESET
+#define __SPI5_RELEASE_RESET __HAL_RCC_SPI5_RELEASE_RESET
+#define __SPI5_CLK_SLEEP_ENABLE __HAL_RCC_SPI5_CLK_SLEEP_ENABLE
+#define __SPI5_CLK_SLEEP_DISABLE __HAL_RCC_SPI5_CLK_SLEEP_DISABLE
+#define __SPI6_CLK_ENABLE __HAL_RCC_SPI6_CLK_ENABLE
+#define __SPI6_CLK_DISABLE __HAL_RCC_SPI6_CLK_DISABLE
+#define __SPI6_FORCE_RESET __HAL_RCC_SPI6_FORCE_RESET
+#define __SPI6_RELEASE_RESET __HAL_RCC_SPI6_RELEASE_RESET
+#define __SPI6_CLK_SLEEP_ENABLE __HAL_RCC_SPI6_CLK_SLEEP_ENABLE
+#define __SPI6_CLK_SLEEP_DISABLE __HAL_RCC_SPI6_CLK_SLEEP_DISABLE
+#define __LTDC_CLK_ENABLE __HAL_RCC_LTDC_CLK_ENABLE
+#define __LTDC_CLK_DISABLE __HAL_RCC_LTDC_CLK_DISABLE
+#define __LTDC_FORCE_RESET __HAL_RCC_LTDC_FORCE_RESET
+#define __LTDC_RELEASE_RESET __HAL_RCC_LTDC_RELEASE_RESET
+#define __LTDC_CLK_SLEEP_ENABLE __HAL_RCC_LTDC_CLK_SLEEP_ENABLE
+#define __ETHMAC_CLK_SLEEP_ENABLE __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE
+#define __ETHMAC_CLK_SLEEP_DISABLE __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE
+#define __ETHMACTX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE
+#define __ETHMACTX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE
+#define __ETHMACRX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE
+#define __ETHMACRX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE
+#define __TIM12_CLK_SLEEP_ENABLE __HAL_RCC_TIM12_CLK_SLEEP_ENABLE
+#define __TIM12_CLK_SLEEP_DISABLE __HAL_RCC_TIM12_CLK_SLEEP_DISABLE
+#define __TIM13_CLK_SLEEP_ENABLE __HAL_RCC_TIM13_CLK_SLEEP_ENABLE
+#define __TIM13_CLK_SLEEP_DISABLE __HAL_RCC_TIM13_CLK_SLEEP_DISABLE
+#define __TIM14_CLK_SLEEP_ENABLE __HAL_RCC_TIM14_CLK_SLEEP_ENABLE
+#define __TIM14_CLK_SLEEP_DISABLE __HAL_RCC_TIM14_CLK_SLEEP_DISABLE
+#define __BKPSRAM_CLK_ENABLE __HAL_RCC_BKPSRAM_CLK_ENABLE
+#define __BKPSRAM_CLK_DISABLE __HAL_RCC_BKPSRAM_CLK_DISABLE
+#define __BKPSRAM_CLK_SLEEP_ENABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE
+#define __BKPSRAM_CLK_SLEEP_DISABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE
+#define __CCMDATARAMEN_CLK_ENABLE __HAL_RCC_CCMDATARAMEN_CLK_ENABLE
+#define __CCMDATARAMEN_CLK_DISABLE __HAL_RCC_CCMDATARAMEN_CLK_DISABLE
+#define __USART6_CLK_ENABLE __HAL_RCC_USART6_CLK_ENABLE
+#define __USART6_CLK_DISABLE __HAL_RCC_USART6_CLK_DISABLE
+#define __USART6_FORCE_RESET __HAL_RCC_USART6_FORCE_RESET
+#define __USART6_RELEASE_RESET __HAL_RCC_USART6_RELEASE_RESET
+#define __USART6_CLK_SLEEP_ENABLE __HAL_RCC_USART6_CLK_SLEEP_ENABLE
+#define __USART6_CLK_SLEEP_DISABLE __HAL_RCC_USART6_CLK_SLEEP_DISABLE
+#define __SPI4_CLK_ENABLE __HAL_RCC_SPI4_CLK_ENABLE
+#define __SPI4_CLK_DISABLE __HAL_RCC_SPI4_CLK_DISABLE
+#define __SPI4_FORCE_RESET __HAL_RCC_SPI4_FORCE_RESET
+#define __SPI4_RELEASE_RESET __HAL_RCC_SPI4_RELEASE_RESET
+#define __SPI4_CLK_SLEEP_ENABLE __HAL_RCC_SPI4_CLK_SLEEP_ENABLE
+#define __SPI4_CLK_SLEEP_DISABLE __HAL_RCC_SPI4_CLK_SLEEP_DISABLE
+#define __GPIOI_CLK_ENABLE __HAL_RCC_GPIOI_CLK_ENABLE
+#define __GPIOI_CLK_DISABLE __HAL_RCC_GPIOI_CLK_DISABLE
+#define __GPIOI_FORCE_RESET __HAL_RCC_GPIOI_FORCE_RESET
+#define __GPIOI_RELEASE_RESET __HAL_RCC_GPIOI_RELEASE_RESET
+#define __GPIOI_CLK_SLEEP_ENABLE __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE
+#define __GPIOI_CLK_SLEEP_DISABLE __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE
+#define __GPIOJ_CLK_ENABLE __HAL_RCC_GPIOJ_CLK_ENABLE
+#define __GPIOJ_CLK_DISABLE __HAL_RCC_GPIOJ_CLK_DISABLE
+#define __GPIOJ_FORCE_RESET __HAL_RCC_GPIOJ_FORCE_RESET
+#define __GPIOJ_RELEASE_RESET __HAL_RCC_GPIOJ_RELEASE_RESET
+#define __GPIOJ_CLK_SLEEP_ENABLE __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE
+#define __GPIOJ_CLK_SLEEP_DISABLE __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE
+#define __GPIOK_CLK_ENABLE __HAL_RCC_GPIOK_CLK_ENABLE
+#define __GPIOK_CLK_DISABLE __HAL_RCC_GPIOK_CLK_DISABLE
+#define __GPIOK_RELEASE_RESET __HAL_RCC_GPIOK_RELEASE_RESET
+#define __GPIOK_CLK_SLEEP_ENABLE __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE
+#define __GPIOK_CLK_SLEEP_DISABLE __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE
+#define __ETH_CLK_ENABLE __HAL_RCC_ETH_CLK_ENABLE
+#define __ETH_CLK_DISABLE __HAL_RCC_ETH_CLK_DISABLE
+#define __DCMI_CLK_ENABLE __HAL_RCC_DCMI_CLK_ENABLE
+#define __DCMI_CLK_DISABLE __HAL_RCC_DCMI_CLK_DISABLE
+#define __DCMI_FORCE_RESET __HAL_RCC_DCMI_FORCE_RESET
+#define __DCMI_RELEASE_RESET __HAL_RCC_DCMI_RELEASE_RESET
+#define __DCMI_CLK_SLEEP_ENABLE __HAL_RCC_DCMI_CLK_SLEEP_ENABLE
+#define __DCMI_CLK_SLEEP_DISABLE __HAL_RCC_DCMI_CLK_SLEEP_DISABLE
+#define __UART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE
+#define __UART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE
+#define __UART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET
+#define __UART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET
+#define __UART7_CLK_SLEEP_ENABLE __HAL_RCC_UART7_CLK_SLEEP_ENABLE
+#define __UART7_CLK_SLEEP_DISABLE __HAL_RCC_UART7_CLK_SLEEP_DISABLE
+#define __UART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE
+#define __UART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE
+#define __UART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET
+#define __UART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET
+#define __UART8_CLK_SLEEP_ENABLE __HAL_RCC_UART8_CLK_SLEEP_ENABLE
+#define __UART8_CLK_SLEEP_DISABLE __HAL_RCC_UART8_CLK_SLEEP_DISABLE
+#define __OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
+#define __OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
+#define __OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET
+#define __OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET
+#define __OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
+#define __OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
+#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
+#define __HAL_RCC_OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET
+#define __HAL_RCC_OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET
+#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
+#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE
+#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET
+#define __SRAM3_CLK_SLEEP_ENABLE __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE
+#define __CAN2_CLK_SLEEP_ENABLE __HAL_RCC_CAN2_CLK_SLEEP_ENABLE
+#define __CAN2_CLK_SLEEP_DISABLE __HAL_RCC_CAN2_CLK_SLEEP_DISABLE
+#define __DAC_CLK_SLEEP_ENABLE __HAL_RCC_DAC_CLK_SLEEP_ENABLE
+#define __DAC_CLK_SLEEP_DISABLE __HAL_RCC_DAC_CLK_SLEEP_DISABLE
+#define __ADC2_CLK_SLEEP_ENABLE __HAL_RCC_ADC2_CLK_SLEEP_ENABLE
+#define __ADC2_CLK_SLEEP_DISABLE __HAL_RCC_ADC2_CLK_SLEEP_DISABLE
+#define __ADC3_CLK_SLEEP_ENABLE __HAL_RCC_ADC3_CLK_SLEEP_ENABLE
+#define __ADC3_CLK_SLEEP_DISABLE __HAL_RCC_ADC3_CLK_SLEEP_DISABLE
+#define __FSMC_FORCE_RESET __HAL_RCC_FSMC_FORCE_RESET
+#define __FSMC_RELEASE_RESET __HAL_RCC_FSMC_RELEASE_RESET
+#define __FSMC_CLK_SLEEP_ENABLE __HAL_RCC_FSMC_CLK_SLEEP_ENABLE
+#define __FSMC_CLK_SLEEP_DISABLE __HAL_RCC_FSMC_CLK_SLEEP_DISABLE
+#define __SDIO_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET
+#define __SDIO_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET
+#define __SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE
+#define __SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE
+#define __DMA2D_CLK_ENABLE __HAL_RCC_DMA2D_CLK_ENABLE
+#define __DMA2D_CLK_DISABLE __HAL_RCC_DMA2D_CLK_DISABLE
+#define __DMA2D_FORCE_RESET __HAL_RCC_DMA2D_FORCE_RESET
+#define __DMA2D_RELEASE_RESET __HAL_RCC_DMA2D_RELEASE_RESET
+#define __DMA2D_CLK_SLEEP_ENABLE __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE
+#define __DMA2D_CLK_SLEEP_DISABLE __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE
+
+/* alias define maintained for legacy */
+#define __HAL_RCC_OTGFS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET
+#define __HAL_RCC_OTGFS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET
+
+#define __HAL_RCC_I2SCLK __HAL_RCC_I2S_CONFIG
+#define __HAL_RCC_I2SCLK_CONFIG __HAL_RCC_I2S_CONFIG
+
+#define __RCC_PLLSRC RCC_GET_PLL_OSCSOURCE
+
+#define IS_RCC_MSIRANGE IS_RCC_MSI_CLOCK_RANGE
+#define IS_RCC_RTCCLK_SOURCE IS_RCC_RTCCLKSOURCE
+#define IS_RCC_SYSCLK_DIV IS_RCC_HCLK
+#define IS_RCC_HCLK_DIV IS_RCC_PCLK
+
+#define IS_RCC_MCOSOURCE IS_RCC_MCO1SOURCE
+#define RCC_MCO_NODIV RCC_MCODIV_1
+#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK
+
+#define HSION_BitNumber RCC_HSION_BIT_NUMBER
+#define CSSON_BitNumber RCC_CSSON_BIT_NUMBER
+#define PLLON_BitNumber RCC_PLLON_BIT_NUMBER
+#define PLLI2SON_BitNumber RCC_PLLI2SON_BIT_NUMBER
+#define I2SSRC_BitNumber RCC_I2SSRC_BIT_NUMBER
+#define RTCEN_BitNumber RCC_RTCEN_BIT_NUMBER
+#define BDRST_BitNumber RCC_BDRST_BIT_NUMBER
+#define LSION_BitNumber RCC_LSION_BIT_NUMBER
+#define PLLSAION_BitNumber RCC_PLLSAION_BIT_NUMBER
+#define TIMPRE_BitNumber RCC_TIMPRE_BIT_NUMBER
+
+#define CR_BYTE2_ADDRESS RCC_CR_BYTE2_ADDRESS
+#define CIR_BYTE1_ADDRESS RCC_CIR_BYTE1_ADDRESS
+#define CIR_BYTE2_ADDRESS RCC_CIR_BYTE2_ADDRESS
+#define BDCR_BYTE0_ADDRESS RCC_BDCR_BYTE0_ADDRESS
+#define DBP_TIMEOUT_VALUE RCC_DBP_TIMEOUT_VALUE
+#define LSE_TIMEOUT_VALUE RCC_LSE_TIMEOUT_VALUE
+
+#define CR_HSION_BB RCC_CR_HSION_BB
+#define CR_CSSON_BB RCC_CR_CSSON_BB
+#define CR_PLLON_BB RCC_CR_PLLON_BB
+#define CR_PLLI2SON_BB RCC_CR_PLLI2SON_BB
+#define CR_MSION_BB RCC_CR_MSION_BB
+#define CSR_LSION_BB RCC_CSR_LSION_BB
+#define CSR_LSEON_BB RCC_CSR_LSEON_BB
+#define CSR_LSEBYP_BB RCC_CSR_LSEBYP_BB
+#define CSR_RTCEN_BB RCC_CSR_RTCEN_BB
+#define CSR_RTCRST_BB RCC_CSR_RTCRST_BB
+#define CFGR_I2SSRC_BB RCC_CFGR_I2SSRC_BB
+#define BDCR_RTCEN_BB RCC_BDCR_RTCEN_BB
+#define BDCR_BDRST_BB RCC_BDCR_BDRST_BB
+#define CR_PLLSAION_BB RCC_CR_PLLSAION_BB
+#define DCKCFGR_TIMPRE_BB RCC_DCKCFGR_TIMPRE_BB
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define HAL_RNG_ReadyCallback(__HANDLE__) HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit)
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG
+#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT
+#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT
+#if defined (STM32F1)
+#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_CLEAR_FLAG()
+
+#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_ENABLE_IT()
+
+#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_DISABLE_IT()
+
+#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GET_FLAG()
+
+#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GENERATE_SWIT()
+#else
+#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()))
+#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()))
+#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()))
+#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()))
+#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \
+ (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \
+ __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()))
+#endif /* STM32F1 */
+
+#define IS_ALARM IS_RTC_ALARM
+#define IS_ALARM_MASK IS_RTC_ALARM_MASK
+#define IS_TAMPER IS_RTC_TAMPER
+#define IS_TAMPER_ERASE_MODE IS_RTC_TAMPER_ERASE_MODE
+#define IS_TAMPER_FILTER IS_RTC_TAMPER_FILTER
+#define IS_TAMPER_INTERRUPT IS_RTC_TAMPER_INTERRUPT
+#define IS_TAMPER_MASKFLAG_STATE IS_RTC_TAMPER_MASKFLAG_STATE
+#define IS_TAMPER_PRECHARGE_DURATION IS_RTC_TAMPER_PRECHARGE_DURATION
+#define IS_TAMPER_PULLUP_STATE IS_RTC_TAMPER_PULLUP_STATE
+#define IS_TAMPER_SAMPLING_FREQ IS_RTC_TAMPER_SAMPLING_FREQ
+#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION
+#define IS_TAMPER_TRIGGER IS_RTC_TAMPER_TRIGGER
+#define IS_WAKEUP_CLOCK IS_RTC_WAKEUP_CLOCK
+#define IS_WAKEUP_COUNTER IS_RTC_WAKEUP_COUNTER
+
+#define __RTC_WRITEPROTECTION_ENABLE __HAL_RTC_WRITEPROTECTION_ENABLE
+#define __RTC_WRITEPROTECTION_DISABLE __HAL_RTC_WRITEPROTECTION_DISABLE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SD_Aliased_Macros HAL SD Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE
+#define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __SMARTCARD_ENABLE_IT __HAL_SMARTCARD_ENABLE_IT
+#define __SMARTCARD_DISABLE_IT __HAL_SMARTCARD_DISABLE_IT
+#define __SMARTCARD_ENABLE __HAL_SMARTCARD_ENABLE
+#define __SMARTCARD_DISABLE __HAL_SMARTCARD_DISABLE
+#define __SMARTCARD_DMA_REQUEST_ENABLE __HAL_SMARTCARD_DMA_REQUEST_ENABLE
+#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE
+
+#define __HAL_SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE
+#define __SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE
+
+#define IS_SMARTCARD_ONEBIT_SAMPLING IS_SMARTCARD_ONE_BIT_SAMPLE
+
+#define SMARTCARD_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define SMARTCARD_STOPBITS_1 ((uint32_t)0x00000000)
+#define SMARTCARD_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+#define SMARTCARD_PARITY_NONE ((uint32_t)0x00000000)
+
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_SMBUS_RESET_CR1 SMBUS_RESET_CR1
+#define __HAL_SMBUS_RESET_CR2 SMBUS_RESET_CR2
+#define __HAL_SMBUS_GENERATE_START SMBUS_GENERATE_START
+#define __HAL_SMBUS_GET_ADDR_MATCH SMBUS_GET_ADDR_MATCH
+#define __HAL_SMBUS_GET_DIR SMBUS_GET_DIR
+#define __HAL_SMBUS_GET_STOP_MODE SMBUS_GET_STOP_MODE
+#define __HAL_SMBUS_GET_PEC_MODE SMBUS_GET_PEC_MODE
+#define __HAL_SMBUS_GET_ALERT_ENABLED SMBUS_GET_ALERT_ENABLED
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_SPI_1LINE_TX SPI_1LINE_TX
+#define __HAL_SPI_1LINE_RX SPI_1LINE_RX
+#define __HAL_SPI_RESET_CRC SPI_RESET_CRC
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE
+#define __HAL_UART_MASK_COMPUTATION UART_MASK_COMPUTATION
+#define __UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE
+#define __UART_MASK_COMPUTATION UART_MASK_COMPUTATION
+
+#define IS_UART_WAKEUPMETHODE IS_UART_WAKEUPMETHOD
+
+#define IS_UART_ONEBIT_SAMPLE IS_UART_ONE_BIT_SAMPLE
+#define IS_UART_ONEBIT_SAMPLING IS_UART_ONE_BIT_SAMPLE
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __USART_ENABLE_IT __HAL_USART_ENABLE_IT
+#define __USART_DISABLE_IT __HAL_USART_DISABLE_IT
+#define __USART_ENABLE __HAL_USART_ENABLE
+#define __USART_DISABLE __HAL_USART_DISABLE
+
+#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE
+#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define USB_EXTI_LINE_WAKEUP USB_WAKEUP_EXTI_LINE
+
+#define USB_FS_EXTI_TRIGGER_RISING_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE
+#define USB_FS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE
+#define USB_FS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE
+#define USB_FS_EXTI_LINE_WAKEUP USB_OTG_FS_WAKEUP_EXTI_LINE
+
+#define USB_HS_EXTI_TRIGGER_RISING_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE
+#define USB_HS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE
+#define USB_HS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE
+#define USB_HS_EXTI_LINE_WAKEUP USB_OTG_HS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_EXTI_ENABLE_IT __HAL_USB_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_EXTI_DISABLE_IT __HAL_USB_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_EXTI_GET_FLAG __HAL_USB_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_EXTI_CLEAR_FLAG __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+
+#define __HAL_USB_FS_EXTI_ENABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_FS_EXTI_DISABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_FS_EXTI_GET_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_FS_EXTI_CLEAR_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+#define __HAL_USB_FS_EXTI_GENERATE_SWIT __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT
+
+#define __HAL_USB_HS_EXTI_ENABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_USB_HS_EXTI_DISABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_USB_HS_EXTI_GET_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG
+#define __HAL_USB_HS_EXTI_CLEAR_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE
+#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
+#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
+#define __HAL_USB_HS_EXTI_GENERATE_SWIT __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT
+
+#define HAL_PCD_ActiveRemoteWakeup HAL_PCD_ActivateRemoteWakeup
+#define HAL_PCD_DeActiveRemoteWakeup HAL_PCD_DeActivateRemoteWakeup
+
+#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo
+#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo
+/**
+ * @}
+ */
+
+/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_TIM_SetICPrescalerValue TIM_SET_ICPRESCALERVALUE
+#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE
+
+#define TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE
+#define TIM_GET_CLEAR_IT __HAL_TIM_CLEAR_IT
+
+#define __HAL_TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE
+
+#define __HAL_TIM_DIRECTION_STATUS __HAL_TIM_IS_TIM_COUNTING_DOWN
+#define __HAL_TIM_PRESCALER __HAL_TIM_SET_PRESCALER
+#define __HAL_TIM_SetCounter __HAL_TIM_SET_COUNTER
+#define __HAL_TIM_GetCounter __HAL_TIM_GET_COUNTER
+#define __HAL_TIM_SetAutoreload __HAL_TIM_SET_AUTORELOAD
+#define __HAL_TIM_GetAutoreload __HAL_TIM_GET_AUTORELOAD
+#define __HAL_TIM_SetClockDivision __HAL_TIM_SET_CLOCKDIVISION
+#define __HAL_TIM_GetClockDivision __HAL_TIM_GET_CLOCKDIVISION
+#define __HAL_TIM_SetICPrescaler __HAL_TIM_SET_ICPRESCALER
+#define __HAL_TIM_GetICPrescaler __HAL_TIM_GET_ICPRESCALER
+#define __HAL_TIM_SetCompare __HAL_TIM_SET_COMPARE
+#define __HAL_TIM_GetCompare __HAL_TIM_GET_COMPARE
+
+#define TIM_TS_ITR0 ((uint32_t)0x0000)
+#define TIM_TS_ITR1 ((uint32_t)0x0010)
+#define TIM_TS_ITR2 ((uint32_t)0x0020)
+#define TIM_TS_ITR3 ((uint32_t)0x0030)
+#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3))
+
+#define TIM_CHANNEL_1 ((uint32_t)0x0000)
+#define TIM_CHANNEL_2 ((uint32_t)0x0004)
+#define IS_TIM_PWMI_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define TIM_OUTPUTNSTATE_DISABLE ((uint32_t)0x0000)
+#define TIM_OUTPUTNSTATE_ENABLE (TIM_CCER_CC1NE)
+
+#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OUTPUTNSTATE_DISABLE) || \
+ ((STATE) == TIM_OUTPUTNSTATE_ENABLE))
+
+#define TIM_OUTPUTSTATE_DISABLE ((uint32_t)0x0000)
+#define TIM_OUTPUTSTATE_ENABLE (TIM_CCER_CC1E)
+
+#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OUTPUTSTATE_DISABLE) || \
+ ((STATE) == TIM_OUTPUTSTATE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+#define __HAL_ETH_EXTI_ENABLE_IT __HAL_ETH_WAKEUP_EXTI_ENABLE_IT
+#define __HAL_ETH_EXTI_DISABLE_IT __HAL_ETH_WAKEUP_EXTI_DISABLE_IT
+#define __HAL_ETH_EXTI_GET_FLAG __HAL_ETH_WAKEUP_EXTI_GET_FLAG
+#define __HAL_ETH_EXTI_CLEAR_FLAG __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG
+#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER
+#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER
+#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER
+
+#define ETH_PROMISCIOUSMODE_ENABLE ETH_PROMISCUOUS_MODE_ENABLE
+#define ETH_PROMISCIOUSMODE_DISABLE ETH_PROMISCUOUS_MODE_DISABLE
+#define IS_ETH_PROMISCIOUS_MODE IS_ETH_PROMISCUOUS_MODE
+/**
+ * @}
+ */
+
+/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define __HAL_LTDC_LAYER LTDC_LAYER
+/**
+ * @}
+ */
+
+/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose
+ * @{
+ */
+#define SAI_OUTPUTDRIVE_DISABLED SAI_OUTPUTDRIVE_DISABLE
+#define SAI_OUTPUTDRIVE_ENABLED SAI_OUTPUTDRIVE_ENABLE
+#define SAI_MASTERDIVIDER_ENABLED SAI_MASTERDIVIDER_ENABLE
+#define SAI_MASTERDIVIDER_DISABLED SAI_MASTERDIVIDER_DISABLE
+#define SAI_STREOMODE SAI_STEREOMODE
+#define SAI_FIFOStatus_Empty SAI_FIFOSTATUS_EMPTY
+#define SAI_FIFOStatus_Less1QuarterFull SAI_FIFOSTATUS_LESS1QUARTERFULL
+#define SAI_FIFOStatus_1QuarterFull SAI_FIFOSTATUS_1QUARTERFULL
+#define SAI_FIFOStatus_HalfFull SAI_FIFOSTATUS_HALFFULL
+#define SAI_FIFOStatus_3QuartersFull SAI_FIFOSTATUS_3QUARTERFULL
+#define SAI_FIFOStatus_Full SAI_FIFOSTATUS_FULL
+#define IS_SAI_BLOCK_MONO_STREO_MODE IS_SAI_BLOCK_MONO_STEREO_MODE
+
+/**
+ * @}
+ */
+
+
+/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32_HAL_LEGACY */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f411xe.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,4803 @@
+/**
+ ******************************************************************************
+ * @file stm32f411xe.h
+ * @author MCD Application Team
+ * @version V2.3.0
+ * @date 02-March-2015
+ * @brief CMSIS STM32F411xExx Device Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripherals registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f401xe
+ * @{
+ */
+
+#ifndef __STM32F401xE_H
+#define __STM32F401xE_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M4 Processor and Core Peripherals
+ */
+#define __CM4_REV 0x0001 /*!< Core revision r0p1 */
+#define __MPU_PRESENT 1 /*!< STM32F4XX provides an MPU */
+#define __NVIC_PRIO_BITS 4 /*!< STM32F4XX uses 4 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+#define __FPU_PRESENT 1 /*!< FPU present */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F4XX Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+typedef enum
+{
+/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M4 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M4 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M4 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M4 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M4 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M4 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M4 System Tick Interrupt */
+/****** STM32 specific Interrupt Numbers **********************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */
+ TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */
+ RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */
+ FLASH_IRQn = 4, /*!< FLASH global Interrupt */
+ RCC_IRQn = 5, /*!< RCC global Interrupt */
+ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */
+ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */
+ EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */
+ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */
+ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */
+ DMA1_Stream0_IRQn = 11, /*!< DMA1 Stream 0 global Interrupt */
+ DMA1_Stream1_IRQn = 12, /*!< DMA1 Stream 1 global Interrupt */
+ DMA1_Stream2_IRQn = 13, /*!< DMA1 Stream 2 global Interrupt */
+ DMA1_Stream3_IRQn = 14, /*!< DMA1 Stream 3 global Interrupt */
+ DMA1_Stream4_IRQn = 15, /*!< DMA1 Stream 4 global Interrupt */
+ DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */
+ DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */
+ ADC_IRQn = 18, /*!< ADC1, ADC2 and ADC3 global Interrupts */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */
+ TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */
+ TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */
+ OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */
+ DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */
+ SDIO_IRQn = 49, /*!< SDIO global Interrupt */
+ TIM5_IRQn = 50, /*!< TIM5 global Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */
+ DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */
+ DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */
+ DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */
+ DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */
+ OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */
+ DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */
+ DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */
+ DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */
+ USART6_IRQn = 71, /*!< USART6 global interrupt */
+ I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */
+ I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */
+ FPU_IRQn = 81, /*!< FPU global interrupt */
+ SPI4_IRQn = 84, /*!< SPI4 global Interrupt */
+ SPI5_IRQn = 85 /*!< SPI5 global Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */
+#include "system_stm32f4xx.h"
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */
+ __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */
+ __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */
+ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */
+ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */
+ __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x14 */
+ __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x18 */
+ __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x1C */
+ __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x20 */
+ __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x24 */
+ __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x28 */
+ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x2C */
+ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x30 */
+ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x34 */
+ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38*/
+ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x3C */
+ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x40 */
+ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x44 */
+ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x48 */
+ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x4C */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1 base address + 0x300 */
+ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */
+ __IO uint32_t CDR; /*!< ADC common regular data register for dual
+ AND triple modes, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+} CRC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DMA stream x configuration register */
+ __IO uint32_t NDTR; /*!< DMA stream x number of data register */
+ __IO uint32_t PAR; /*!< DMA stream x peripheral address register */
+ __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */
+ __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */
+ __IO uint32_t FCR; /*!< DMA stream x FIFO control register */
+} DMA_Stream_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */
+ __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */
+ __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */
+ __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */
+} DMA_TypeDef;
+
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */
+} EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+
+typedef struct
+{
+ __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */
+ __IO uint32_t OPTCR; /*!< FLASH option control register , Address offset: 0x14 */
+ __IO uint32_t OPTCR1; /*!< FLASH option control register 1, Address offset: 0x18 */
+} FLASH_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */
+} GPIO_TypeDef;
+
+/**
+ * @brief System configuration controller
+ */
+
+typedef struct
+{
+ __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */
+ __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */
+ uint32_t RESERVED[2]; /*!< Reserved, 0x18-0x1C */
+ __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */
+} SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address register 1, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address register 2, Address offset: 0x0C */
+ __IO uint32_t DR; /*!< I2C Data register, Address offset: 0x10 */
+ __IO uint32_t SR1; /*!< I2C Status register 1, Address offset: 0x14 */
+ __IO uint32_t SR2; /*!< I2C Status register 2, Address offset: 0x18 */
+ __IO uint32_t CCR; /*!< I2C Clock control register, Address offset: 0x1C */
+ __IO uint32_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */
+ __IO uint32_t FLTR; /*!< I2C FLTR register, Address offset: 0x24 */
+} I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+} IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+} PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t PLLCFGR; /*!< RCC PLL configuration register, Address offset: 0x04 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x0C */
+ __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x14 */
+ __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x18 */
+ uint32_t RESERVED0; /*!< Reserved, 0x1C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x20 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x24 */
+ uint32_t RESERVED1[2]; /*!< Reserved, 0x28-0x2C */
+ __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0x30 */
+ __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0x34 */
+ __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0x38 */
+ uint32_t RESERVED2; /*!< Reserved, 0x3C */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x40 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x44 */
+ uint32_t RESERVED3[2]; /*!< Reserved, 0x48-0x4C */
+ __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */
+ __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */
+ __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */
+ uint32_t RESERVED4; /*!< Reserved, 0x5C */
+ __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */
+ __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */
+ uint32_t RESERVED5[2]; /*!< Reserved, 0x68-0x6C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x70 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */
+ uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */
+ __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */
+ __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */
+
+} RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ __IO uint32_t CALIBR; /*!< RTC calibration register, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR;/*!< RTC alarm A sub second register, Address offset: 0x44 */
+ __IO uint32_t ALRMBSSR;/*!< RTC alarm B sub second register, Address offset: 0x48 */
+ uint32_t RESERVED7; /*!< Reserved, 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 1, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+ __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */
+ __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */
+ __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */
+ __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */
+ __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */
+ __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */
+ __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */
+ __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */
+ __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */
+ __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */
+ __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */
+ __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */
+ __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */
+ __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */
+ __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */
+} RTC_TypeDef;
+
+
+/**
+ * @brief SD host Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t POWER; /*!< SDIO power control register, Address offset: 0x00 */
+ __IO uint32_t CLKCR; /*!< SDI clock control register, Address offset: 0x04 */
+ __IO uint32_t ARG; /*!< SDIO argument register, Address offset: 0x08 */
+ __IO uint32_t CMD; /*!< SDIO command register, Address offset: 0x0C */
+ __I uint32_t RESPCMD; /*!< SDIO command response register, Address offset: 0x10 */
+ __I uint32_t RESP1; /*!< SDIO response 1 register, Address offset: 0x14 */
+ __I uint32_t RESP2; /*!< SDIO response 2 register, Address offset: 0x18 */
+ __I uint32_t RESP3; /*!< SDIO response 3 register, Address offset: 0x1C */
+ __I uint32_t RESP4; /*!< SDIO response 4 register, Address offset: 0x20 */
+ __IO uint32_t DTIMER; /*!< SDIO data timer register, Address offset: 0x24 */
+ __IO uint32_t DLEN; /*!< SDIO data length register, Address offset: 0x28 */
+ __IO uint32_t DCTRL; /*!< SDIO data control register, Address offset: 0x2C */
+ __I uint32_t DCOUNT; /*!< SDIO data counter register, Address offset: 0x30 */
+ __I uint32_t STA; /*!< SDIO status register, Address offset: 0x34 */
+ __IO uint32_t ICR; /*!< SDIO interrupt clear register, Address offset: 0x38 */
+ __IO uint32_t MASK; /*!< SDIO mask register, Address offset: 0x3C */
+ uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */
+ __I uint32_t FIFOCNT; /*!< SDIO FIFO counter register, Address offset: 0x48 */
+ uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */
+ __IO uint32_t FIFO; /*!< SDIO data FIFO register, Address offset: 0x80 */
+} SDIO_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+} SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+} TIM_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */
+} USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+} WWDG_TypeDef;
+
+
+/**
+ * @brief __USB_OTG_Core_register
+ */
+typedef struct
+{
+ __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register Address offset : 0x00 */
+ __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register Address offset : 0x04 */
+ __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register Address offset : 0x08 */
+ __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register Address offset : 0x0C */
+ __IO uint32_t GRSTCTL; /*!< Core Reset Register Address offset : 0x10 */
+ __IO uint32_t GINTSTS; /*!< Core Interrupt Register Address offset : 0x14 */
+ __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register Address offset : 0x18 */
+ __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register Address offset : 0x1C */
+ __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register Address offset : 0x20 */
+ __IO uint32_t GRXFSIZ; /* Receive FIFO Size Register Address offset : 0x24 */
+ __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register Address offset : 0x28 */
+ __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg Address offset : 0x2C */
+ uint32_t Reserved30[2]; /* Reserved Address offset : 0x30 */
+ __IO uint32_t GCCFG; /*!< General Purpose IO Register Address offset : 0x38 */
+ __IO uint32_t CID; /*!< User ID Register Address offset : 0x3C */
+ uint32_t Reserved40[48]; /*!< Reserved Address offset : 0x40-0xFF */
+ __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg Address offset : 0x100 */
+ __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO */
+}
+USB_OTG_GlobalTypeDef;
+
+
+
+/**
+ * @brief __device_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DCFG; /*!< dev Configuration Register Address offset : 0x800 */
+ __IO uint32_t DCTL; /*!< dev Control Register Address offset : 0x804 */
+ __IO uint32_t DSTS; /*!< dev Status Register (RO) Address offset : 0x808 */
+ uint32_t Reserved0C; /*!< Reserved Address offset : 0x80C */
+ __IO uint32_t DIEPMSK; /* !< dev IN Endpoint Mask Address offset : 0x810 */
+ __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask Address offset : 0x814 */
+ __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg Address offset : 0x818 */
+ __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask Address offset : 0x81C */
+ uint32_t Reserved20; /*!< Reserved Address offset : 0x820 */
+ uint32_t Reserved9; /*!< Reserved Address offset : 0x824 */
+ __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register Address offset : 0x828 */
+ __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register Address offset : 0x82C */
+ __IO uint32_t DTHRCTL; /*!< dev thr Address offset : 0x830 */
+ __IO uint32_t DIEPEMPMSK; /*!< dev empty msk Address offset : 0x834 */
+ __IO uint32_t DEACHINT; /*!< dedicated EP interrupt Address offset : 0x838 */
+ __IO uint32_t DEACHMSK; /*!< dedicated EP msk Address offset : 0x83C */
+ uint32_t Reserved40; /*!< dedicated EP mask Address offset : 0x840 */
+ __IO uint32_t DINEP1MSK; /*!< dedicated EP mask Address offset : 0x844 */
+ uint32_t Reserved44[15]; /*!< Reserved Address offset : 0x844-0x87C */
+ __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk Address offset : 0x884 */
+}
+USB_OTG_DeviceTypeDef;
+
+
+/**
+ * @brief __IN_Endpoint-Specific_Register
+ */
+typedef struct
+{
+ __IO uint32_t DIEPCTL; /* dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h */
+ uint32_t Reserved04; /* Reserved 900h + (ep_num * 20h) + 04h */
+ __IO uint32_t DIEPINT; /* dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h */
+ uint32_t Reserved0C; /* Reserved 900h + (ep_num * 20h) + 0Ch */
+ __IO uint32_t DIEPTSIZ; /* IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h */
+ __IO uint32_t DIEPDMA; /* IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h */
+ __IO uint32_t DTXFSTS; /*IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h */
+ uint32_t Reserved18; /* Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch */
+}
+USB_OTG_INEndpointTypeDef;
+
+
+/**
+ * @brief __OUT_Endpoint-Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DOEPCTL; /* dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h*/
+ uint32_t Reserved04; /* Reserved B00h + (ep_num * 20h) + 04h*/
+ __IO uint32_t DOEPINT; /* dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h*/
+ uint32_t Reserved0C; /* Reserved B00h + (ep_num * 20h) + 0Ch*/
+ __IO uint32_t DOEPTSIZ; /* dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h*/
+ __IO uint32_t DOEPDMA; /* dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h*/
+ uint32_t Reserved18[2]; /* Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch*/
+}
+USB_OTG_OUTEndpointTypeDef;
+
+
+/**
+ * @brief __Host_Mode_Register_Structures
+ */
+typedef struct
+{
+ __IO uint32_t HCFG; /* Host Configuration Register 400h*/
+ __IO uint32_t HFIR; /* Host Frame Interval Register 404h*/
+ __IO uint32_t HFNUM; /* Host Frame Nbr/Frame Remaining 408h*/
+ uint32_t Reserved40C; /* Reserved 40Ch*/
+ __IO uint32_t HPTXSTS; /* Host Periodic Tx FIFO/ Queue Status 410h*/
+ __IO uint32_t HAINT; /* Host All Channels Interrupt Register 414h*/
+ __IO uint32_t HAINTMSK; /* Host All Channels Interrupt Mask 418h*/
+}
+USB_OTG_HostTypeDef;
+
+
+/**
+ * @brief __Host_Channel_Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t HCCHAR;
+ __IO uint32_t HCSPLT;
+ __IO uint32_t HCINT;
+ __IO uint32_t HCINTMSK;
+ __IO uint32_t HCTSIZ;
+ __IO uint32_t HCDMA;
+ uint32_t Reserved[2];
+}
+USB_OTG_HostChannelTypeDef;
+
+
+/**
+ * @brief Peripheral_memory_map
+ */
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH(up to 1 MB) base address in the alias region */
+#define CCMDATARAM_BASE ((uint32_t)0x10000000) /*!< CCM(core coupled memory) data RAM(64 KB) base address in the alias region */
+#define SRAM1_BASE ((uint32_t)0x20000000) /*!< SRAM1(112 KB) base address in the alias region */
+#define SRAM2_BASE ((uint32_t)0x2001C000) /*!< SRAM2(16 KB) base address in the alias region */
+#define SRAM3_BASE ((uint32_t)0x20020000) /*!< SRAM3(64 KB) base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+#define BKPSRAM_BASE ((uint32_t)0x40024000) /*!< Backup SRAM(4 KB) base address in the alias region */
+#define CCMDATARAM_BB_BASE ((uint32_t)0x12000000) /*!< CCM(core coupled memory) data RAM(64 KB) base address in the bit-band region */
+#define SRAM1_BB_BASE ((uint32_t)0x22000000) /*!< SRAM1(112 KB) base address in the bit-band region */
+#define SRAM2_BB_BASE ((uint32_t)0x2201C000) /*!< SRAM2(16 KB) base address in the bit-band region */
+#define SRAM3_BB_BASE ((uint32_t)0x22020000) /*!< SRAM3(64 KB) base address in the bit-band region */
+#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */
+#define BKPSRAM_BB_BASE ((uint32_t)0x42024000) /*!< Backup SRAM(4 KB) base address in the bit-band region */
+#define FLASH_END ((uint32_t)0x0807FFFF) /*!< FLASH end address */
+
+/* Legacy defines */
+#define SRAM_BASE SRAM1_BASE
+#define SRAM_BB_BASE SRAM1_BB_BASE
+
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE PERIPH_BASE
+#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000)
+#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x10000000)
+
+/*!< APB1 peripherals */
+#define TIM2_BASE (APB1PERIPH_BASE + 0x0000)
+#define TIM3_BASE (APB1PERIPH_BASE + 0x0400)
+#define TIM4_BASE (APB1PERIPH_BASE + 0x0800)
+#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00)
+#define RTC_BASE (APB1PERIPH_BASE + 0x2800)
+#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00)
+#define IWDG_BASE (APB1PERIPH_BASE + 0x3000)
+#define I2S2ext_BASE (APB1PERIPH_BASE + 0x3400)
+#define SPI2_BASE (APB1PERIPH_BASE + 0x3800)
+#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00)
+#define I2S3ext_BASE (APB1PERIPH_BASE + 0x4000)
+#define USART2_BASE (APB1PERIPH_BASE + 0x4400)
+#define I2C1_BASE (APB1PERIPH_BASE + 0x5400)
+#define I2C2_BASE (APB1PERIPH_BASE + 0x5800)
+#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00)
+#define PWR_BASE (APB1PERIPH_BASE + 0x7000)
+
+/*!< APB2 peripherals */
+#define TIM1_BASE (APB2PERIPH_BASE + 0x0000)
+#define USART1_BASE (APB2PERIPH_BASE + 0x1000)
+#define USART6_BASE (APB2PERIPH_BASE + 0x1400)
+#define ADC1_BASE (APB2PERIPH_BASE + 0x2000)
+#define ADC_BASE (APB2PERIPH_BASE + 0x2300)
+#define SDIO_BASE (APB2PERIPH_BASE + 0x2C00)
+#define SPI1_BASE (APB2PERIPH_BASE + 0x3000)
+#define SPI4_BASE (APB2PERIPH_BASE + 0x3400)
+#define SYSCFG_BASE (APB2PERIPH_BASE + 0x3800)
+#define EXTI_BASE (APB2PERIPH_BASE + 0x3C00)
+#define TIM9_BASE (APB2PERIPH_BASE + 0x4000)
+#define TIM10_BASE (APB2PERIPH_BASE + 0x4400)
+#define TIM11_BASE (APB2PERIPH_BASE + 0x4800)
+#define SPI5_BASE (APB2PERIPH_BASE + 0x5000)
+
+/*!< AHB1 peripherals */
+#define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000)
+#define GPIOB_BASE (AHB1PERIPH_BASE + 0x0400)
+#define GPIOC_BASE (AHB1PERIPH_BASE + 0x0800)
+#define GPIOD_BASE (AHB1PERIPH_BASE + 0x0C00)
+#define GPIOE_BASE (AHB1PERIPH_BASE + 0x1000)
+#define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00)
+#define CRC_BASE (AHB1PERIPH_BASE + 0x3000)
+#define RCC_BASE (AHB1PERIPH_BASE + 0x3800)
+#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00)
+#define DMA1_BASE (AHB1PERIPH_BASE + 0x6000)
+#define DMA1_Stream0_BASE (DMA1_BASE + 0x010)
+#define DMA1_Stream1_BASE (DMA1_BASE + 0x028)
+#define DMA1_Stream2_BASE (DMA1_BASE + 0x040)
+#define DMA1_Stream3_BASE (DMA1_BASE + 0x058)
+#define DMA1_Stream4_BASE (DMA1_BASE + 0x070)
+#define DMA1_Stream5_BASE (DMA1_BASE + 0x088)
+#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0)
+#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8)
+#define DMA2_BASE (AHB1PERIPH_BASE + 0x6400)
+#define DMA2_Stream0_BASE (DMA2_BASE + 0x010)
+#define DMA2_Stream1_BASE (DMA2_BASE + 0x028)
+#define DMA2_Stream2_BASE (DMA2_BASE + 0x040)
+#define DMA2_Stream3_BASE (DMA2_BASE + 0x058)
+#define DMA2_Stream4_BASE (DMA2_BASE + 0x070)
+#define DMA2_Stream5_BASE (DMA2_BASE + 0x088)
+#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0)
+#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8)
+
+/* Debug MCU registers base address */
+#define DBGMCU_BASE ((uint32_t )0xE0042000)
+
+/*!< USB registers base address */
+#define USB_OTG_FS_PERIPH_BASE ((uint32_t )0x50000000)
+
+#define USB_OTG_GLOBAL_BASE ((uint32_t )0x000)
+#define USB_OTG_DEVICE_BASE ((uint32_t )0x800)
+#define USB_OTG_IN_ENDPOINT_BASE ((uint32_t )0x900)
+#define USB_OTG_OUT_ENDPOINT_BASE ((uint32_t )0xB00)
+#define USB_OTG_EP_REG_SIZE ((uint32_t )0x20)
+#define USB_OTG_HOST_BASE ((uint32_t )0x400)
+#define USB_OTG_HOST_PORT_BASE ((uint32_t )0x440)
+#define USB_OTG_HOST_CHANNEL_BASE ((uint32_t )0x500)
+#define USB_OTG_HOST_CHANNEL_SIZE ((uint32_t )0x20)
+#define USB_OTG_PCGCCTL_BASE ((uint32_t )0xE00)
+#define USB_OTG_FIFO_BASE ((uint32_t )0x1000)
+#define USB_OTG_FIFO_SIZE ((uint32_t )0x1000)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM4 ((TIM_TypeDef *) TIM4_BASE)
+#define TIM5 ((TIM_TypeDef *) TIM5_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define I2S2ext ((SPI_TypeDef *) I2S2ext_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define SPI3 ((SPI_TypeDef *) SPI3_BASE)
+#define I2S3ext ((SPI_TypeDef *) I2S3ext_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define I2C3 ((I2C_TypeDef *) I2C3_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define USART6 ((USART_TypeDef *) USART6_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define SDIO ((SDIO_TypeDef *) SDIO_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define SPI4 ((SPI_TypeDef *) SPI4_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define TIM9 ((TIM_TypeDef *) TIM9_BASE)
+#define TIM10 ((TIM_TypeDef *) TIM10_BASE)
+#define TIM11 ((TIM_TypeDef *) TIM11_BASE)
+#define SPI5 ((SPI_TypeDef *) SPI5_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE)
+#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE)
+#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE)
+#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE)
+#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE)
+#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE)
+#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE)
+#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE)
+#define DMA2 ((DMA_TypeDef *) DMA2_BASE)
+#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE)
+#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE)
+#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE)
+#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE)
+#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE)
+#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE)
+#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE)
+#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE)
+
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+
+#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers_Bits_Definition */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter */
+/* */
+/******************************************************************************/
+/******************** Bit definition for ADC_SR register ********************/
+#define ADC_SR_AWD ((uint32_t)0x00000001) /*!<Analog watchdog flag */
+#define ADC_SR_EOC ((uint32_t)0x00000002) /*!<End of conversion */
+#define ADC_SR_JEOC ((uint32_t)0x00000004) /*!<Injected channel end of conversion */
+#define ADC_SR_JSTRT ((uint32_t)0x00000008) /*!<Injected channel Start flag */
+#define ADC_SR_STRT ((uint32_t)0x00000010) /*!<Regular channel Start flag */
+#define ADC_SR_OVR ((uint32_t)0x00000020) /*!<Overrun flag */
+
+/******************* Bit definition for ADC_CR1 register ********************/
+#define ADC_CR1_AWDCH ((uint32_t)0x0000001F) /*!<AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CR1_AWDCH_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_CR1_AWDCH_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_CR1_AWDCH_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_CR1_AWDCH_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_CR1_AWDCH_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_CR1_EOCIE ((uint32_t)0x00000020) /*!<Interrupt enable for EOC */
+#define ADC_CR1_AWDIE ((uint32_t)0x00000040) /*!<AAnalog Watchdog interrupt enable */
+#define ADC_CR1_JEOCIE ((uint32_t)0x00000080) /*!<Interrupt enable for injected channels */
+#define ADC_CR1_SCAN ((uint32_t)0x00000100) /*!<Scan mode */
+#define ADC_CR1_AWDSGL ((uint32_t)0x00000200) /*!<Enable the watchdog on a single channel in scan mode */
+#define ADC_CR1_JAUTO ((uint32_t)0x00000400) /*!<Automatic injected group conversion */
+#define ADC_CR1_DISCEN ((uint32_t)0x00000800) /*!<Discontinuous mode on regular channels */
+#define ADC_CR1_JDISCEN ((uint32_t)0x00001000) /*!<Discontinuous mode on injected channels */
+#define ADC_CR1_DISCNUM ((uint32_t)0x0000E000) /*!<DISCNUM[2:0] bits (Discontinuous mode channel count) */
+#define ADC_CR1_DISCNUM_0 ((uint32_t)0x00002000) /*!<Bit 0 */
+#define ADC_CR1_DISCNUM_1 ((uint32_t)0x00004000) /*!<Bit 1 */
+#define ADC_CR1_DISCNUM_2 ((uint32_t)0x00008000) /*!<Bit 2 */
+#define ADC_CR1_JAWDEN ((uint32_t)0x00400000) /*!<Analog watchdog enable on injected channels */
+#define ADC_CR1_AWDEN ((uint32_t)0x00800000) /*!<Analog watchdog enable on regular channels */
+#define ADC_CR1_RES ((uint32_t)0x03000000) /*!<RES[2:0] bits (Resolution) */
+#define ADC_CR1_RES_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define ADC_CR1_RES_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define ADC_CR1_OVRIE ((uint32_t)0x04000000) /*!<overrun interrupt enable */
+
+/******************* Bit definition for ADC_CR2 register ********************/
+#define ADC_CR2_ADON ((uint32_t)0x00000001) /*!<A/D Converter ON / OFF */
+#define ADC_CR2_CONT ((uint32_t)0x00000002) /*!<Continuous Conversion */
+#define ADC_CR2_DMA ((uint32_t)0x00000100) /*!<Direct Memory access mode */
+#define ADC_CR2_DDS ((uint32_t)0x00000200) /*!<DMA disable selection (Single ADC) */
+#define ADC_CR2_EOCS ((uint32_t)0x00000400) /*!<End of conversion selection */
+#define ADC_CR2_ALIGN ((uint32_t)0x00000800) /*!<Data Alignment */
+#define ADC_CR2_JEXTSEL ((uint32_t)0x000F0000) /*!<JEXTSEL[3:0] bits (External event select for injected group) */
+#define ADC_CR2_JEXTSEL_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define ADC_CR2_JEXTSEL_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define ADC_CR2_JEXTSEL_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define ADC_CR2_JEXTSEL_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define ADC_CR2_JEXTEN ((uint32_t)0x00300000) /*!<JEXTEN[1:0] bits (External Trigger Conversion mode for injected channelsp) */
+#define ADC_CR2_JEXTEN_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_CR2_JEXTEN_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define ADC_CR2_JSWSTART ((uint32_t)0x00400000) /*!<Start Conversion of injected channels */
+#define ADC_CR2_EXTSEL ((uint32_t)0x0F000000) /*!<EXTSEL[3:0] bits (External Event Select for regular group) */
+#define ADC_CR2_EXTSEL_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define ADC_CR2_EXTSEL_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define ADC_CR2_EXTSEL_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define ADC_CR2_EXTSEL_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define ADC_CR2_EXTEN ((uint32_t)0x30000000) /*!<EXTEN[1:0] bits (External Trigger Conversion mode for regular channelsp) */
+#define ADC_CR2_EXTEN_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define ADC_CR2_EXTEN_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+#define ADC_CR2_SWSTART ((uint32_t)0x40000000) /*!<Start Conversion of regular channels */
+
+/****************** Bit definition for ADC_SMPR1 register *******************/
+#define ADC_SMPR1_SMP10 ((uint32_t)0x00000007) /*!<SMP10[2:0] bits (Channel 10 Sample time selection) */
+#define ADC_SMPR1_SMP10_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SMPR1_SMP10_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SMPR1_SMP10_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SMPR1_SMP11 ((uint32_t)0x00000038) /*!<SMP11[2:0] bits (Channel 11 Sample time selection) */
+#define ADC_SMPR1_SMP11_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define ADC_SMPR1_SMP11_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define ADC_SMPR1_SMP11_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define ADC_SMPR1_SMP12 ((uint32_t)0x000001C0) /*!<SMP12[2:0] bits (Channel 12 Sample time selection) */
+#define ADC_SMPR1_SMP12_0 ((uint32_t)0x00000040) /*!<Bit 0 */
+#define ADC_SMPR1_SMP12_1 ((uint32_t)0x00000080) /*!<Bit 1 */
+#define ADC_SMPR1_SMP12_2 ((uint32_t)0x00000100) /*!<Bit 2 */
+#define ADC_SMPR1_SMP13 ((uint32_t)0x00000E00) /*!<SMP13[2:0] bits (Channel 13 Sample time selection) */
+#define ADC_SMPR1_SMP13_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define ADC_SMPR1_SMP13_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+#define ADC_SMPR1_SMP13_2 ((uint32_t)0x00000800) /*!<Bit 2 */
+#define ADC_SMPR1_SMP14 ((uint32_t)0x00007000) /*!<SMP14[2:0] bits (Channel 14 Sample time selection) */
+#define ADC_SMPR1_SMP14_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP14_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP14_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define ADC_SMPR1_SMP15 ((uint32_t)0x00038000) /*!<SMP15[2:0] bits (Channel 15 Sample time selection) */
+#define ADC_SMPR1_SMP15_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP15_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP15_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SMPR1_SMP16 ((uint32_t)0x001C0000) /*!<SMP16[2:0] bits (Channel 16 Sample time selection) */
+#define ADC_SMPR1_SMP16_0 ((uint32_t)0x00040000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP16_1 ((uint32_t)0x00080000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP16_2 ((uint32_t)0x00100000) /*!<Bit 2 */
+#define ADC_SMPR1_SMP17 ((uint32_t)0x00E00000) /*!<SMP17[2:0] bits (Channel 17 Sample time selection) */
+#define ADC_SMPR1_SMP17_0 ((uint32_t)0x00200000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP17_1 ((uint32_t)0x00400000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP17_2 ((uint32_t)0x00800000) /*!<Bit 2 */
+#define ADC_SMPR1_SMP18 ((uint32_t)0x07000000) /*!<SMP18[2:0] bits (Channel 18 Sample time selection) */
+#define ADC_SMPR1_SMP18_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP18_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP18_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+
+/****************** Bit definition for ADC_SMPR2 register *******************/
+#define ADC_SMPR2_SMP0 ((uint32_t)0x00000007) /*!<SMP0[2:0] bits (Channel 0 Sample time selection) */
+#define ADC_SMPR2_SMP0_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SMPR2_SMP0_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SMPR2_SMP0_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SMPR2_SMP1 ((uint32_t)0x00000038) /*!<SMP1[2:0] bits (Channel 1 Sample time selection) */
+#define ADC_SMPR2_SMP1_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define ADC_SMPR2_SMP1_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define ADC_SMPR2_SMP1_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define ADC_SMPR2_SMP2 ((uint32_t)0x000001C0) /*!<SMP2[2:0] bits (Channel 2 Sample time selection) */
+#define ADC_SMPR2_SMP2_0 ((uint32_t)0x00000040) /*!<Bit 0 */
+#define ADC_SMPR2_SMP2_1 ((uint32_t)0x00000080) /*!<Bit 1 */
+#define ADC_SMPR2_SMP2_2 ((uint32_t)0x00000100) /*!<Bit 2 */
+#define ADC_SMPR2_SMP3 ((uint32_t)0x00000E00) /*!<SMP3[2:0] bits (Channel 3 Sample time selection) */
+#define ADC_SMPR2_SMP3_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define ADC_SMPR2_SMP3_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+#define ADC_SMPR2_SMP3_2 ((uint32_t)0x00000800) /*!<Bit 2 */
+#define ADC_SMPR2_SMP4 ((uint32_t)0x00007000) /*!<SMP4[2:0] bits (Channel 4 Sample time selection) */
+#define ADC_SMPR2_SMP4_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP4_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP4_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP5 ((uint32_t)0x00038000) /*!<SMP5[2:0] bits (Channel 5 Sample time selection) */
+#define ADC_SMPR2_SMP5_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP5_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP5_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP6 ((uint32_t)0x001C0000) /*!<SMP6[2:0] bits (Channel 6 Sample time selection) */
+#define ADC_SMPR2_SMP6_0 ((uint32_t)0x00040000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP6_1 ((uint32_t)0x00080000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP6_2 ((uint32_t)0x00100000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP7 ((uint32_t)0x00E00000) /*!<SMP7[2:0] bits (Channel 7 Sample time selection) */
+#define ADC_SMPR2_SMP7_0 ((uint32_t)0x00200000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP7_1 ((uint32_t)0x00400000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP7_2 ((uint32_t)0x00800000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP8 ((uint32_t)0x07000000) /*!<SMP8[2:0] bits (Channel 8 Sample time selection) */
+#define ADC_SMPR2_SMP8_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP8_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP8_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP9 ((uint32_t)0x38000000) /*!<SMP9[2:0] bits (Channel 9 Sample time selection) */
+#define ADC_SMPR2_SMP9_0 ((uint32_t)0x08000000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP9_1 ((uint32_t)0x10000000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP9_2 ((uint32_t)0x20000000) /*!<Bit 2 */
+
+/****************** Bit definition for ADC_JOFR1 register *******************/
+#define ADC_JOFR1_JOFFSET1 ((uint32_t)0x0FFF) /*!<Data offset for injected channel 1 */
+
+/****************** Bit definition for ADC_JOFR2 register *******************/
+#define ADC_JOFR2_JOFFSET2 ((uint32_t)0x0FFF) /*!<Data offset for injected channel 2 */
+
+/****************** Bit definition for ADC_JOFR3 register *******************/
+#define ADC_JOFR3_JOFFSET3 ((uint32_t)0x0FFF) /*!<Data offset for injected channel 3 */
+
+/****************** Bit definition for ADC_JOFR4 register *******************/
+#define ADC_JOFR4_JOFFSET4 ((uint32_t)0x0FFF) /*!<Data offset for injected channel 4 */
+
+/******************* Bit definition for ADC_HTR register ********************/
+#define ADC_HTR_HT ((uint32_t)0x0FFF) /*!<Analog watchdog high threshold */
+
+/******************* Bit definition for ADC_LTR register ********************/
+#define ADC_LTR_LT ((uint32_t)0x0FFF) /*!<Analog watchdog low threshold */
+
+/******************* Bit definition for ADC_SQR1 register *******************/
+#define ADC_SQR1_SQ13 ((uint32_t)0x0000001F) /*!<SQ13[4:0] bits (13th conversion in regular sequence) */
+#define ADC_SQR1_SQ13_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SQR1_SQ13_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SQR1_SQ13_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SQR1_SQ13_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_SQR1_SQ13_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_SQR1_SQ14 ((uint32_t)0x000003E0) /*!<SQ14[4:0] bits (14th conversion in regular sequence) */
+#define ADC_SQR1_SQ14_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define ADC_SQR1_SQ14_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define ADC_SQR1_SQ14_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+#define ADC_SQR1_SQ14_3 ((uint32_t)0x00000100) /*!<Bit 3 */
+#define ADC_SQR1_SQ14_4 ((uint32_t)0x00000200) /*!<Bit 4 */
+#define ADC_SQR1_SQ15 ((uint32_t)0x00007C00) /*!<SQ15[4:0] bits (15th conversion in regular sequence) */
+#define ADC_SQR1_SQ15_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define ADC_SQR1_SQ15_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define ADC_SQR1_SQ15_2 ((uint32_t)0x00001000) /*!<Bit 2 */
+#define ADC_SQR1_SQ15_3 ((uint32_t)0x00002000) /*!<Bit 3 */
+#define ADC_SQR1_SQ15_4 ((uint32_t)0x00004000) /*!<Bit 4 */
+#define ADC_SQR1_SQ16 ((uint32_t)0x000F8000) /*!<SQ16[4:0] bits (16th conversion in regular sequence) */
+#define ADC_SQR1_SQ16_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SQR1_SQ16_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SQR1_SQ16_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SQR1_SQ16_3 ((uint32_t)0x00040000) /*!<Bit 3 */
+#define ADC_SQR1_SQ16_4 ((uint32_t)0x00080000) /*!<Bit 4 */
+#define ADC_SQR1_L ((uint32_t)0x00F00000) /*!<L[3:0] bits (Regular channel sequence length) */
+#define ADC_SQR1_L_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_SQR1_L_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define ADC_SQR1_L_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define ADC_SQR1_L_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+/******************* Bit definition for ADC_SQR2 register *******************/
+#define ADC_SQR2_SQ7 ((uint32_t)0x0000001F) /*!<SQ7[4:0] bits (7th conversion in regular sequence) */
+#define ADC_SQR2_SQ7_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SQR2_SQ7_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SQR2_SQ7_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SQR2_SQ7_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_SQR2_SQ7_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_SQR2_SQ8 ((uint32_t)0x000003E0) /*!<SQ8[4:0] bits (8th conversion in regular sequence) */
+#define ADC_SQR2_SQ8_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define ADC_SQR2_SQ8_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define ADC_SQR2_SQ8_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+#define ADC_SQR2_SQ8_3 ((uint32_t)0x00000100) /*!<Bit 3 */
+#define ADC_SQR2_SQ8_4 ((uint32_t)0x00000200) /*!<Bit 4 */
+#define ADC_SQR2_SQ9 ((uint32_t)0x00007C00) /*!<SQ9[4:0] bits (9th conversion in regular sequence) */
+#define ADC_SQR2_SQ9_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define ADC_SQR2_SQ9_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define ADC_SQR2_SQ9_2 ((uint32_t)0x00001000) /*!<Bit 2 */
+#define ADC_SQR2_SQ9_3 ((uint32_t)0x00002000) /*!<Bit 3 */
+#define ADC_SQR2_SQ9_4 ((uint32_t)0x00004000) /*!<Bit 4 */
+#define ADC_SQR2_SQ10 ((uint32_t)0x000F8000) /*!<SQ10[4:0] bits (10th conversion in regular sequence) */
+#define ADC_SQR2_SQ10_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SQR2_SQ10_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SQR2_SQ10_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SQR2_SQ10_3 ((uint32_t)0x00040000) /*!<Bit 3 */
+#define ADC_SQR2_SQ10_4 ((uint32_t)0x00080000) /*!<Bit 4 */
+#define ADC_SQR2_SQ11 ((uint32_t)0x01F00000) /*!<SQ11[4:0] bits (11th conversion in regular sequence) */
+#define ADC_SQR2_SQ11_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_SQR2_SQ11_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define ADC_SQR2_SQ11_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define ADC_SQR2_SQ11_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+#define ADC_SQR2_SQ11_4 ((uint32_t)0x01000000) /*!<Bit 4 */
+#define ADC_SQR2_SQ12 ((uint32_t)0x3E000000) /*!<SQ12[4:0] bits (12th conversion in regular sequence) */
+#define ADC_SQR2_SQ12_0 ((uint32_t)0x02000000) /*!<Bit 0 */
+#define ADC_SQR2_SQ12_1 ((uint32_t)0x04000000) /*!<Bit 1 */
+#define ADC_SQR2_SQ12_2 ((uint32_t)0x08000000) /*!<Bit 2 */
+#define ADC_SQR2_SQ12_3 ((uint32_t)0x10000000) /*!<Bit 3 */
+#define ADC_SQR2_SQ12_4 ((uint32_t)0x20000000) /*!<Bit 4 */
+
+/******************* Bit definition for ADC_SQR3 register *******************/
+#define ADC_SQR3_SQ1 ((uint32_t)0x0000001F) /*!<SQ1[4:0] bits (1st conversion in regular sequence) */
+#define ADC_SQR3_SQ1_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SQR3_SQ1_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SQR3_SQ1_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SQR3_SQ1_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_SQR3_SQ1_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_SQR3_SQ2 ((uint32_t)0x000003E0) /*!<SQ2[4:0] bits (2nd conversion in regular sequence) */
+#define ADC_SQR3_SQ2_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define ADC_SQR3_SQ2_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define ADC_SQR3_SQ2_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+#define ADC_SQR3_SQ2_3 ((uint32_t)0x00000100) /*!<Bit 3 */
+#define ADC_SQR3_SQ2_4 ((uint32_t)0x00000200) /*!<Bit 4 */
+#define ADC_SQR3_SQ3 ((uint32_t)0x00007C00) /*!<SQ3[4:0] bits (3rd conversion in regular sequence) */
+#define ADC_SQR3_SQ3_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define ADC_SQR3_SQ3_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define ADC_SQR3_SQ3_2 ((uint32_t)0x00001000) /*!<Bit 2 */
+#define ADC_SQR3_SQ3_3 ((uint32_t)0x00002000) /*!<Bit 3 */
+#define ADC_SQR3_SQ3_4 ((uint32_t)0x00004000) /*!<Bit 4 */
+#define ADC_SQR3_SQ4 ((uint32_t)0x000F8000) /*!<SQ4[4:0] bits (4th conversion in regular sequence) */
+#define ADC_SQR3_SQ4_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SQR3_SQ4_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SQR3_SQ4_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SQR3_SQ4_3 ((uint32_t)0x00040000) /*!<Bit 3 */
+#define ADC_SQR3_SQ4_4 ((uint32_t)0x00080000) /*!<Bit 4 */
+#define ADC_SQR3_SQ5 ((uint32_t)0x01F00000) /*!<SQ5[4:0] bits (5th conversion in regular sequence) */
+#define ADC_SQR3_SQ5_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_SQR3_SQ5_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define ADC_SQR3_SQ5_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define ADC_SQR3_SQ5_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+#define ADC_SQR3_SQ5_4 ((uint32_t)0x01000000) /*!<Bit 4 */
+#define ADC_SQR3_SQ6 ((uint32_t)0x3E000000) /*!<SQ6[4:0] bits (6th conversion in regular sequence) */
+#define ADC_SQR3_SQ6_0 ((uint32_t)0x02000000) /*!<Bit 0 */
+#define ADC_SQR3_SQ6_1 ((uint32_t)0x04000000) /*!<Bit 1 */
+#define ADC_SQR3_SQ6_2 ((uint32_t)0x08000000) /*!<Bit 2 */
+#define ADC_SQR3_SQ6_3 ((uint32_t)0x10000000) /*!<Bit 3 */
+#define ADC_SQR3_SQ6_4 ((uint32_t)0x20000000) /*!<Bit 4 */
+
+/******************* Bit definition for ADC_JSQR register *******************/
+#define ADC_JSQR_JSQ1 ((uint32_t)0x0000001F) /*!<JSQ1[4:0] bits (1st conversion in injected sequence) */
+#define ADC_JSQR_JSQ1_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_JSQR_JSQ1_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_JSQR_JSQ1_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_JSQR_JSQ1_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_JSQR_JSQ1_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_JSQR_JSQ2 ((uint32_t)0x000003E0) /*!<JSQ2[4:0] bits (2nd conversion in injected sequence) */
+#define ADC_JSQR_JSQ2_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define ADC_JSQR_JSQ2_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define ADC_JSQR_JSQ2_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+#define ADC_JSQR_JSQ2_3 ((uint32_t)0x00000100) /*!<Bit 3 */
+#define ADC_JSQR_JSQ2_4 ((uint32_t)0x00000200) /*!<Bit 4 */
+#define ADC_JSQR_JSQ3 ((uint32_t)0x00007C00) /*!<JSQ3[4:0] bits (3rd conversion in injected sequence) */
+#define ADC_JSQR_JSQ3_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define ADC_JSQR_JSQ3_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define ADC_JSQR_JSQ3_2 ((uint32_t)0x00001000) /*!<Bit 2 */
+#define ADC_JSQR_JSQ3_3 ((uint32_t)0x00002000) /*!<Bit 3 */
+#define ADC_JSQR_JSQ3_4 ((uint32_t)0x00004000) /*!<Bit 4 */
+#define ADC_JSQR_JSQ4 ((uint32_t)0x000F8000) /*!<JSQ4[4:0] bits (4th conversion in injected sequence) */
+#define ADC_JSQR_JSQ4_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_JSQR_JSQ4_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_JSQR_JSQ4_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_JSQR_JSQ4_3 ((uint32_t)0x00040000) /*!<Bit 3 */
+#define ADC_JSQR_JSQ4_4 ((uint32_t)0x00080000) /*!<Bit 4 */
+#define ADC_JSQR_JL ((uint32_t)0x00300000) /*!<JL[1:0] bits (Injected Sequence length) */
+#define ADC_JSQR_JL_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_JSQR_JL_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+
+/******************* Bit definition for ADC_JDR1 register *******************/
+#define ADC_JDR1_JDATA ((uint32_t)0xFFFF) /*!<Injected data */
+
+/******************* Bit definition for ADC_JDR2 register *******************/
+#define ADC_JDR2_JDATA ((uint32_t)0xFFFF) /*!<Injected data */
+
+/******************* Bit definition for ADC_JDR3 register *******************/
+#define ADC_JDR3_JDATA ((uint32_t)0xFFFF) /*!<Injected data */
+
+/******************* Bit definition for ADC_JDR4 register *******************/
+#define ADC_JDR4_JDATA ((uint32_t)0xFFFF) /*!<Injected data */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!<Regular data */
+#define ADC_DR_ADC2DATA ((uint32_t)0xFFFF0000) /*!<ADC2 data */
+
+/******************* Bit definition for ADC_CSR register ********************/
+#define ADC_CSR_AWD1 ((uint32_t)0x00000001) /*!<ADC1 Analog watchdog flag */
+#define ADC_CSR_EOC1 ((uint32_t)0x00000002) /*!<ADC1 End of conversion */
+#define ADC_CSR_JEOC1 ((uint32_t)0x00000004) /*!<ADC1 Injected channel end of conversion */
+#define ADC_CSR_JSTRT1 ((uint32_t)0x00000008) /*!<ADC1 Injected channel Start flag */
+#define ADC_CSR_STRT1 ((uint32_t)0x00000010) /*!<ADC1 Regular channel Start flag */
+#define ADC_CSR_DOVR1 ((uint32_t)0x00000020) /*!<ADC1 DMA overrun flag */
+#define ADC_CSR_AWD2 ((uint32_t)0x00000100) /*!<ADC2 Analog watchdog flag */
+#define ADC_CSR_EOC2 ((uint32_t)0x00000200) /*!<ADC2 End of conversion */
+#define ADC_CSR_JEOC2 ((uint32_t)0x00000400) /*!<ADC2 Injected channel end of conversion */
+#define ADC_CSR_JSTRT2 ((uint32_t)0x00000800) /*!<ADC2 Injected channel Start flag */
+#define ADC_CSR_STRT2 ((uint32_t)0x00001000) /*!<ADC2 Regular channel Start flag */
+#define ADC_CSR_DOVR2 ((uint32_t)0x00002000) /*!<ADC2 DMA overrun flag */
+#define ADC_CSR_AWD3 ((uint32_t)0x00010000) /*!<ADC3 Analog watchdog flag */
+#define ADC_CSR_EOC3 ((uint32_t)0x00020000) /*!<ADC3 End of conversion */
+#define ADC_CSR_JEOC3 ((uint32_t)0x00040000) /*!<ADC3 Injected channel end of conversion */
+#define ADC_CSR_JSTRT3 ((uint32_t)0x00080000) /*!<ADC3 Injected channel Start flag */
+#define ADC_CSR_STRT3 ((uint32_t)0x00100000) /*!<ADC3 Regular channel Start flag */
+#define ADC_CSR_DOVR3 ((uint32_t)0x00200000) /*!<ADC3 DMA overrun flag */
+
+/******************* Bit definition for ADC_CCR register ********************/
+#define ADC_CCR_MULTI ((uint32_t)0x0000001F) /*!<MULTI[4:0] bits (Multi-ADC mode selection) */
+#define ADC_CCR_MULTI_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_CCR_MULTI_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_CCR_MULTI_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_CCR_MULTI_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_CCR_MULTI_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_CCR_DELAY ((uint32_t)0x00000F00) /*!<DELAY[3:0] bits (Delay between 2 sampling phases) */
+#define ADC_CCR_DELAY_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define ADC_CCR_DELAY_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define ADC_CCR_DELAY_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define ADC_CCR_DELAY_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define ADC_CCR_DDS ((uint32_t)0x00002000) /*!<DMA disable selection (Multi-ADC mode) */
+#define ADC_CCR_DMA ((uint32_t)0x0000C000) /*!<DMA[1:0] bits (Direct Memory Access mode for multimode) */
+#define ADC_CCR_DMA_0 ((uint32_t)0x00004000) /*!<Bit 0 */
+#define ADC_CCR_DMA_1 ((uint32_t)0x00008000) /*!<Bit 1 */
+#define ADC_CCR_ADCPRE ((uint32_t)0x00030000) /*!<ADCPRE[1:0] bits (ADC prescaler) */
+#define ADC_CCR_ADCPRE_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define ADC_CCR_ADCPRE_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define ADC_CCR_VBATE ((uint32_t)0x00400000) /*!<VBAT Enable */
+#define ADC_CCR_TSVREFE ((uint32_t)0x00800000) /*!<Temperature Sensor and VREFINT Enable */
+
+/******************* Bit definition for ADC_CDR register ********************/
+#define ADC_CDR_DATA1 ((uint32_t)0x0000FFFF) /*!<1st data of a pair of regular conversions */
+#define ADC_CDR_DATA2 ((uint32_t)0xFFFF0000) /*!<2nd data of a pair of regular conversions */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint32_t)0xFF) /*!< General-purpose 8-bit data register bits */
+
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint32_t)0x01) /*!< RESET bit */
+
+/******************************************************************************/
+/* */
+/* Debug MCU */
+/* */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* DMA Controller */
+/* */
+/******************************************************************************/
+/******************** Bits definition for DMA_SxCR register *****************/
+#define DMA_SxCR_CHSEL ((uint32_t)0x0E000000)
+#define DMA_SxCR_CHSEL_0 ((uint32_t)0x02000000)
+#define DMA_SxCR_CHSEL_1 ((uint32_t)0x04000000)
+#define DMA_SxCR_CHSEL_2 ((uint32_t)0x08000000)
+#define DMA_SxCR_MBURST ((uint32_t)0x01800000)
+#define DMA_SxCR_MBURST_0 ((uint32_t)0x00800000)
+#define DMA_SxCR_MBURST_1 ((uint32_t)0x01000000)
+#define DMA_SxCR_PBURST ((uint32_t)0x00600000)
+#define DMA_SxCR_PBURST_0 ((uint32_t)0x00200000)
+#define DMA_SxCR_PBURST_1 ((uint32_t)0x00400000)
+#define DMA_SxCR_ACK ((uint32_t)0x00100000)
+#define DMA_SxCR_CT ((uint32_t)0x00080000)
+#define DMA_SxCR_DBM ((uint32_t)0x00040000)
+#define DMA_SxCR_PL ((uint32_t)0x00030000)
+#define DMA_SxCR_PL_0 ((uint32_t)0x00010000)
+#define DMA_SxCR_PL_1 ((uint32_t)0x00020000)
+#define DMA_SxCR_PINCOS ((uint32_t)0x00008000)
+#define DMA_SxCR_MSIZE ((uint32_t)0x00006000)
+#define DMA_SxCR_MSIZE_0 ((uint32_t)0x00002000)
+#define DMA_SxCR_MSIZE_1 ((uint32_t)0x00004000)
+#define DMA_SxCR_PSIZE ((uint32_t)0x00001800)
+#define DMA_SxCR_PSIZE_0 ((uint32_t)0x00000800)
+#define DMA_SxCR_PSIZE_1 ((uint32_t)0x00001000)
+#define DMA_SxCR_MINC ((uint32_t)0x00000400)
+#define DMA_SxCR_PINC ((uint32_t)0x00000200)
+#define DMA_SxCR_CIRC ((uint32_t)0x00000100)
+#define DMA_SxCR_DIR ((uint32_t)0x000000C0)
+#define DMA_SxCR_DIR_0 ((uint32_t)0x00000040)
+#define DMA_SxCR_DIR_1 ((uint32_t)0x00000080)
+#define DMA_SxCR_PFCTRL ((uint32_t)0x00000020)
+#define DMA_SxCR_TCIE ((uint32_t)0x00000010)
+#define DMA_SxCR_HTIE ((uint32_t)0x00000008)
+#define DMA_SxCR_TEIE ((uint32_t)0x00000004)
+#define DMA_SxCR_DMEIE ((uint32_t)0x00000002)
+#define DMA_SxCR_EN ((uint32_t)0x00000001)
+
+/******************** Bits definition for DMA_SxCNDTR register **************/
+#define DMA_SxNDT ((uint32_t)0x0000FFFF)
+#define DMA_SxNDT_0 ((uint32_t)0x00000001)
+#define DMA_SxNDT_1 ((uint32_t)0x00000002)
+#define DMA_SxNDT_2 ((uint32_t)0x00000004)
+#define DMA_SxNDT_3 ((uint32_t)0x00000008)
+#define DMA_SxNDT_4 ((uint32_t)0x00000010)
+#define DMA_SxNDT_5 ((uint32_t)0x00000020)
+#define DMA_SxNDT_6 ((uint32_t)0x00000040)
+#define DMA_SxNDT_7 ((uint32_t)0x00000080)
+#define DMA_SxNDT_8 ((uint32_t)0x00000100)
+#define DMA_SxNDT_9 ((uint32_t)0x00000200)
+#define DMA_SxNDT_10 ((uint32_t)0x00000400)
+#define DMA_SxNDT_11 ((uint32_t)0x00000800)
+#define DMA_SxNDT_12 ((uint32_t)0x00001000)
+#define DMA_SxNDT_13 ((uint32_t)0x00002000)
+#define DMA_SxNDT_14 ((uint32_t)0x00004000)
+#define DMA_SxNDT_15 ((uint32_t)0x00008000)
+
+/******************** Bits definition for DMA_SxFCR register ****************/
+#define DMA_SxFCR_FEIE ((uint32_t)0x00000080)
+#define DMA_SxFCR_FS ((uint32_t)0x00000038)
+#define DMA_SxFCR_FS_0 ((uint32_t)0x00000008)
+#define DMA_SxFCR_FS_1 ((uint32_t)0x00000010)
+#define DMA_SxFCR_FS_2 ((uint32_t)0x00000020)
+#define DMA_SxFCR_DMDIS ((uint32_t)0x00000004)
+#define DMA_SxFCR_FTH ((uint32_t)0x00000003)
+#define DMA_SxFCR_FTH_0 ((uint32_t)0x00000001)
+#define DMA_SxFCR_FTH_1 ((uint32_t)0x00000002)
+
+/******************** Bits definition for DMA_LISR register *****************/
+#define DMA_LISR_TCIF3 ((uint32_t)0x08000000)
+#define DMA_LISR_HTIF3 ((uint32_t)0x04000000)
+#define DMA_LISR_TEIF3 ((uint32_t)0x02000000)
+#define DMA_LISR_DMEIF3 ((uint32_t)0x01000000)
+#define DMA_LISR_FEIF3 ((uint32_t)0x00400000)
+#define DMA_LISR_TCIF2 ((uint32_t)0x00200000)
+#define DMA_LISR_HTIF2 ((uint32_t)0x00100000)
+#define DMA_LISR_TEIF2 ((uint32_t)0x00080000)
+#define DMA_LISR_DMEIF2 ((uint32_t)0x00040000)
+#define DMA_LISR_FEIF2 ((uint32_t)0x00010000)
+#define DMA_LISR_TCIF1 ((uint32_t)0x00000800)
+#define DMA_LISR_HTIF1 ((uint32_t)0x00000400)
+#define DMA_LISR_TEIF1 ((uint32_t)0x00000200)
+#define DMA_LISR_DMEIF1 ((uint32_t)0x00000100)
+#define DMA_LISR_FEIF1 ((uint32_t)0x00000040)
+#define DMA_LISR_TCIF0 ((uint32_t)0x00000020)
+#define DMA_LISR_HTIF0 ((uint32_t)0x00000010)
+#define DMA_LISR_TEIF0 ((uint32_t)0x00000008)
+#define DMA_LISR_DMEIF0 ((uint32_t)0x00000004)
+#define DMA_LISR_FEIF0 ((uint32_t)0x00000001)
+
+/******************** Bits definition for DMA_HISR register *****************/
+#define DMA_HISR_TCIF7 ((uint32_t)0x08000000)
+#define DMA_HISR_HTIF7 ((uint32_t)0x04000000)
+#define DMA_HISR_TEIF7 ((uint32_t)0x02000000)
+#define DMA_HISR_DMEIF7 ((uint32_t)0x01000000)
+#define DMA_HISR_FEIF7 ((uint32_t)0x00400000)
+#define DMA_HISR_TCIF6 ((uint32_t)0x00200000)
+#define DMA_HISR_HTIF6 ((uint32_t)0x00100000)
+#define DMA_HISR_TEIF6 ((uint32_t)0x00080000)
+#define DMA_HISR_DMEIF6 ((uint32_t)0x00040000)
+#define DMA_HISR_FEIF6 ((uint32_t)0x00010000)
+#define DMA_HISR_TCIF5 ((uint32_t)0x00000800)
+#define DMA_HISR_HTIF5 ((uint32_t)0x00000400)
+#define DMA_HISR_TEIF5 ((uint32_t)0x00000200)
+#define DMA_HISR_DMEIF5 ((uint32_t)0x00000100)
+#define DMA_HISR_FEIF5 ((uint32_t)0x00000040)
+#define DMA_HISR_TCIF4 ((uint32_t)0x00000020)
+#define DMA_HISR_HTIF4 ((uint32_t)0x00000010)
+#define DMA_HISR_TEIF4 ((uint32_t)0x00000008)
+#define DMA_HISR_DMEIF4 ((uint32_t)0x00000004)
+#define DMA_HISR_FEIF4 ((uint32_t)0x00000001)
+
+/******************** Bits definition for DMA_LIFCR register ****************/
+#define DMA_LIFCR_CTCIF3 ((uint32_t)0x08000000)
+#define DMA_LIFCR_CHTIF3 ((uint32_t)0x04000000)
+#define DMA_LIFCR_CTEIF3 ((uint32_t)0x02000000)
+#define DMA_LIFCR_CDMEIF3 ((uint32_t)0x01000000)
+#define DMA_LIFCR_CFEIF3 ((uint32_t)0x00400000)
+#define DMA_LIFCR_CTCIF2 ((uint32_t)0x00200000)
+#define DMA_LIFCR_CHTIF2 ((uint32_t)0x00100000)
+#define DMA_LIFCR_CTEIF2 ((uint32_t)0x00080000)
+#define DMA_LIFCR_CDMEIF2 ((uint32_t)0x00040000)
+#define DMA_LIFCR_CFEIF2 ((uint32_t)0x00010000)
+#define DMA_LIFCR_CTCIF1 ((uint32_t)0x00000800)
+#define DMA_LIFCR_CHTIF1 ((uint32_t)0x00000400)
+#define DMA_LIFCR_CTEIF1 ((uint32_t)0x00000200)
+#define DMA_LIFCR_CDMEIF1 ((uint32_t)0x00000100)
+#define DMA_LIFCR_CFEIF1 ((uint32_t)0x00000040)
+#define DMA_LIFCR_CTCIF0 ((uint32_t)0x00000020)
+#define DMA_LIFCR_CHTIF0 ((uint32_t)0x00000010)
+#define DMA_LIFCR_CTEIF0 ((uint32_t)0x00000008)
+#define DMA_LIFCR_CDMEIF0 ((uint32_t)0x00000004)
+#define DMA_LIFCR_CFEIF0 ((uint32_t)0x00000001)
+
+/******************** Bits definition for DMA_HIFCR register ****************/
+#define DMA_HIFCR_CTCIF7 ((uint32_t)0x08000000)
+#define DMA_HIFCR_CHTIF7 ((uint32_t)0x04000000)
+#define DMA_HIFCR_CTEIF7 ((uint32_t)0x02000000)
+#define DMA_HIFCR_CDMEIF7 ((uint32_t)0x01000000)
+#define DMA_HIFCR_CFEIF7 ((uint32_t)0x00400000)
+#define DMA_HIFCR_CTCIF6 ((uint32_t)0x00200000)
+#define DMA_HIFCR_CHTIF6 ((uint32_t)0x00100000)
+#define DMA_HIFCR_CTEIF6 ((uint32_t)0x00080000)
+#define DMA_HIFCR_CDMEIF6 ((uint32_t)0x00040000)
+#define DMA_HIFCR_CFEIF6 ((uint32_t)0x00010000)
+#define DMA_HIFCR_CTCIF5 ((uint32_t)0x00000800)
+#define DMA_HIFCR_CHTIF5 ((uint32_t)0x00000400)
+#define DMA_HIFCR_CTEIF5 ((uint32_t)0x00000200)
+#define DMA_HIFCR_CDMEIF5 ((uint32_t)0x00000100)
+#define DMA_HIFCR_CFEIF5 ((uint32_t)0x00000040)
+#define DMA_HIFCR_CTCIF4 ((uint32_t)0x00000020)
+#define DMA_HIFCR_CHTIF4 ((uint32_t)0x00000010)
+#define DMA_HIFCR_CTEIF4 ((uint32_t)0x00000008)
+#define DMA_HIFCR_CDMEIF4 ((uint32_t)0x00000004)
+#define DMA_HIFCR_CFEIF4 ((uint32_t)0x00000001)
+
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR18 ((uint32_t)0x00040000) /*!< Interrupt Mask on line 18 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR20 ((uint32_t)0x00100000) /*!< Interrupt Mask on line 20 */
+#define EXTI_IMR_MR21 ((uint32_t)0x00200000) /*!< Interrupt Mask on line 21 */
+#define EXTI_IMR_MR22 ((uint32_t)0x00400000) /*!< Interrupt Mask on line 22 */
+
+/******************* Bit definition for EXTI_EMR register *******************/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR18 ((uint32_t)0x00040000) /*!< Event Mask on line 18 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR20 ((uint32_t)0x00100000) /*!< Event Mask on line 20 */
+#define EXTI_EMR_MR21 ((uint32_t)0x00200000) /*!< Event Mask on line 21 */
+#define EXTI_EMR_MR22 ((uint32_t)0x00400000) /*!< Event Mask on line 22 */
+
+/****************** Bit definition for EXTI_RTSR register *******************/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR18 ((uint32_t)0x00040000) /*!< Rising trigger event configuration bit of line 18 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+#define EXTI_RTSR_TR20 ((uint32_t)0x00100000) /*!< Rising trigger event configuration bit of line 20 */
+#define EXTI_RTSR_TR21 ((uint32_t)0x00200000) /*!< Rising trigger event configuration bit of line 21 */
+#define EXTI_RTSR_TR22 ((uint32_t)0x00400000) /*!< Rising trigger event configuration bit of line 22 */
+
+/****************** Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR18 ((uint32_t)0x00040000) /*!< Falling trigger event configuration bit of line 18 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+#define EXTI_FTSR_TR20 ((uint32_t)0x00100000) /*!< Falling trigger event configuration bit of line 20 */
+#define EXTI_FTSR_TR21 ((uint32_t)0x00200000) /*!< Falling trigger event configuration bit of line 21 */
+#define EXTI_FTSR_TR22 ((uint32_t)0x00400000) /*!< Falling trigger event configuration bit of line 22 */
+
+/****************** Bit definition for EXTI_SWIER register ******************/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER18 ((uint32_t)0x00040000) /*!< Software Interrupt on line 18 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+#define EXTI_SWIER_SWIER20 ((uint32_t)0x00100000) /*!< Software Interrupt on line 20 */
+#define EXTI_SWIER_SWIER21 ((uint32_t)0x00200000) /*!< Software Interrupt on line 21 */
+#define EXTI_SWIER_SWIER22 ((uint32_t)0x00400000) /*!< Software Interrupt on line 22 */
+
+/******************* Bit definition for EXTI_PR register ********************/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit for line 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit for line 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit for line 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit for line 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit for line 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit for line 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit for line 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit for line 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit for line 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit for line 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit for line 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit for line 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit for line 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit for line 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit for line 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit for line 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit for line 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit for line 17 */
+#define EXTI_PR_PR18 ((uint32_t)0x00040000) /*!< Pending bit for line 18 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit for line 19 */
+#define EXTI_PR_PR20 ((uint32_t)0x00100000) /*!< Pending bit for line 20 */
+#define EXTI_PR_PR21 ((uint32_t)0x00200000) /*!< Pending bit for line 21 */
+#define EXTI_PR_PR22 ((uint32_t)0x00400000) /*!< Pending bit for line 22 */
+
+/******************************************************************************/
+/* */
+/* FLASH */
+/* */
+/******************************************************************************/
+/******************* Bits definition for FLASH_ACR register *****************/
+#define FLASH_ACR_LATENCY ((uint32_t)0x0000000F)
+#define FLASH_ACR_LATENCY_0WS ((uint32_t)0x00000000)
+#define FLASH_ACR_LATENCY_1WS ((uint32_t)0x00000001)
+#define FLASH_ACR_LATENCY_2WS ((uint32_t)0x00000002)
+#define FLASH_ACR_LATENCY_3WS ((uint32_t)0x00000003)
+#define FLASH_ACR_LATENCY_4WS ((uint32_t)0x00000004)
+#define FLASH_ACR_LATENCY_5WS ((uint32_t)0x00000005)
+#define FLASH_ACR_LATENCY_6WS ((uint32_t)0x00000006)
+#define FLASH_ACR_LATENCY_7WS ((uint32_t)0x00000007)
+
+#define FLASH_ACR_PRFTEN ((uint32_t)0x00000100)
+#define FLASH_ACR_ICEN ((uint32_t)0x00000200)
+#define FLASH_ACR_DCEN ((uint32_t)0x00000400)
+#define FLASH_ACR_ICRST ((uint32_t)0x00000800)
+#define FLASH_ACR_DCRST ((uint32_t)0x00001000)
+#define FLASH_ACR_BYTE0_ADDRESS ((uint32_t)0x40023C00)
+#define FLASH_ACR_BYTE2_ADDRESS ((uint32_t)0x40023C03)
+
+/******************* Bits definition for FLASH_SR register ******************/
+#define FLASH_SR_EOP ((uint32_t)0x00000001)
+#define FLASH_SR_SOP ((uint32_t)0x00000002)
+#define FLASH_SR_WRPERR ((uint32_t)0x00000010)
+#define FLASH_SR_PGAERR ((uint32_t)0x00000020)
+#define FLASH_SR_PGPERR ((uint32_t)0x00000040)
+#define FLASH_SR_PGSERR ((uint32_t)0x00000080)
+#define FLASH_SR_BSY ((uint32_t)0x00010000)
+
+/******************* Bits definition for FLASH_CR register ******************/
+#define FLASH_CR_PG ((uint32_t)0x00000001)
+#define FLASH_CR_SER ((uint32_t)0x00000002)
+#define FLASH_CR_MER ((uint32_t)0x00000004)
+#define FLASH_CR_SNB ((uint32_t)0x000000F8)
+#define FLASH_CR_SNB_0 ((uint32_t)0x00000008)
+#define FLASH_CR_SNB_1 ((uint32_t)0x00000010)
+#define FLASH_CR_SNB_2 ((uint32_t)0x00000020)
+#define FLASH_CR_SNB_3 ((uint32_t)0x00000040)
+#define FLASH_CR_SNB_4 ((uint32_t)0x00000080)
+#define FLASH_CR_PSIZE ((uint32_t)0x00000300)
+#define FLASH_CR_PSIZE_0 ((uint32_t)0x00000100)
+#define FLASH_CR_PSIZE_1 ((uint32_t)0x00000200)
+#define FLASH_CR_STRT ((uint32_t)0x00010000)
+#define FLASH_CR_EOPIE ((uint32_t)0x01000000)
+#define FLASH_CR_LOCK ((uint32_t)0x80000000)
+
+/******************* Bits definition for FLASH_OPTCR register ***************/
+#define FLASH_OPTCR_OPTLOCK ((uint32_t)0x00000001)
+#define FLASH_OPTCR_OPTSTRT ((uint32_t)0x00000002)
+#define FLASH_OPTCR_BOR_LEV_0 ((uint32_t)0x00000004)
+#define FLASH_OPTCR_BOR_LEV_1 ((uint32_t)0x00000008)
+#define FLASH_OPTCR_BOR_LEV ((uint32_t)0x0000000C)
+
+#define FLASH_OPTCR_WDG_SW ((uint32_t)0x00000020)
+#define FLASH_OPTCR_nRST_STOP ((uint32_t)0x00000040)
+#define FLASH_OPTCR_nRST_STDBY ((uint32_t)0x00000080)
+#define FLASH_OPTCR_RDP ((uint32_t)0x0000FF00)
+#define FLASH_OPTCR_RDP_0 ((uint32_t)0x00000100)
+#define FLASH_OPTCR_RDP_1 ((uint32_t)0x00000200)
+#define FLASH_OPTCR_RDP_2 ((uint32_t)0x00000400)
+#define FLASH_OPTCR_RDP_3 ((uint32_t)0x00000800)
+#define FLASH_OPTCR_RDP_4 ((uint32_t)0x00001000)
+#define FLASH_OPTCR_RDP_5 ((uint32_t)0x00002000)
+#define FLASH_OPTCR_RDP_6 ((uint32_t)0x00004000)
+#define FLASH_OPTCR_RDP_7 ((uint32_t)0x00008000)
+#define FLASH_OPTCR_nWRP ((uint32_t)0x0FFF0000)
+#define FLASH_OPTCR_nWRP_0 ((uint32_t)0x00010000)
+#define FLASH_OPTCR_nWRP_1 ((uint32_t)0x00020000)
+#define FLASH_OPTCR_nWRP_2 ((uint32_t)0x00040000)
+#define FLASH_OPTCR_nWRP_3 ((uint32_t)0x00080000)
+#define FLASH_OPTCR_nWRP_4 ((uint32_t)0x00100000)
+#define FLASH_OPTCR_nWRP_5 ((uint32_t)0x00200000)
+#define FLASH_OPTCR_nWRP_6 ((uint32_t)0x00400000)
+#define FLASH_OPTCR_nWRP_7 ((uint32_t)0x00800000)
+#define FLASH_OPTCR_nWRP_8 ((uint32_t)0x01000000)
+#define FLASH_OPTCR_nWRP_9 ((uint32_t)0x02000000)
+#define FLASH_OPTCR_nWRP_10 ((uint32_t)0x04000000)
+#define FLASH_OPTCR_nWRP_11 ((uint32_t)0x08000000)
+
+/****************** Bits definition for FLASH_OPTCR1 register ***************/
+#define FLASH_OPTCR1_nWRP ((uint32_t)0x0FFF0000)
+#define FLASH_OPTCR1_nWRP_0 ((uint32_t)0x00010000)
+#define FLASH_OPTCR1_nWRP_1 ((uint32_t)0x00020000)
+#define FLASH_OPTCR1_nWRP_2 ((uint32_t)0x00040000)
+#define FLASH_OPTCR1_nWRP_3 ((uint32_t)0x00080000)
+#define FLASH_OPTCR1_nWRP_4 ((uint32_t)0x00100000)
+#define FLASH_OPTCR1_nWRP_5 ((uint32_t)0x00200000)
+#define FLASH_OPTCR1_nWRP_6 ((uint32_t)0x00400000)
+#define FLASH_OPTCR1_nWRP_7 ((uint32_t)0x00800000)
+#define FLASH_OPTCR1_nWRP_8 ((uint32_t)0x01000000)
+#define FLASH_OPTCR1_nWRP_9 ((uint32_t)0x02000000)
+#define FLASH_OPTCR1_nWRP_10 ((uint32_t)0x04000000)
+#define FLASH_OPTCR1_nWRP_11 ((uint32_t)0x08000000)
+
+/******************************************************************************/
+/* */
+/* General Purpose I/O */
+/* */
+/******************************************************************************/
+/****************** Bits definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
+
+#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
+
+#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
+
+#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
+
+#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
+
+#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
+
+#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
+
+#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
+
+#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
+
+#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
+
+#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
+
+#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
+
+#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
+
+#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
+
+#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
+
+#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
+
+/****************** Bits definition for GPIO_OTYPER register ****************/
+#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
+
+/****************** Bits definition for GPIO_OSPEEDR register ***************/
+#define GPIO_OSPEEDER_OSPEEDR0 ((uint32_t)0x00000003)
+#define GPIO_OSPEEDER_OSPEEDR0_0 ((uint32_t)0x00000001)
+#define GPIO_OSPEEDER_OSPEEDR0_1 ((uint32_t)0x00000002)
+
+#define GPIO_OSPEEDER_OSPEEDR1 ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDER_OSPEEDR1_0 ((uint32_t)0x00000004)
+#define GPIO_OSPEEDER_OSPEEDR1_1 ((uint32_t)0x00000008)
+
+#define GPIO_OSPEEDER_OSPEEDR2 ((uint32_t)0x00000030)
+#define GPIO_OSPEEDER_OSPEEDR2_0 ((uint32_t)0x00000010)
+#define GPIO_OSPEEDER_OSPEEDR2_1 ((uint32_t)0x00000020)
+
+#define GPIO_OSPEEDER_OSPEEDR3 ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDER_OSPEEDR3_0 ((uint32_t)0x00000040)
+#define GPIO_OSPEEDER_OSPEEDR3_1 ((uint32_t)0x00000080)
+
+#define GPIO_OSPEEDER_OSPEEDR4 ((uint32_t)0x00000300)
+#define GPIO_OSPEEDER_OSPEEDR4_0 ((uint32_t)0x00000100)
+#define GPIO_OSPEEDER_OSPEEDR4_1 ((uint32_t)0x00000200)
+
+#define GPIO_OSPEEDER_OSPEEDR5 ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDER_OSPEEDR5_0 ((uint32_t)0x00000400)
+#define GPIO_OSPEEDER_OSPEEDR5_1 ((uint32_t)0x00000800)
+
+#define GPIO_OSPEEDER_OSPEEDR6 ((uint32_t)0x00003000)
+#define GPIO_OSPEEDER_OSPEEDR6_0 ((uint32_t)0x00001000)
+#define GPIO_OSPEEDER_OSPEEDR6_1 ((uint32_t)0x00002000)
+
+#define GPIO_OSPEEDER_OSPEEDR7 ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDER_OSPEEDR7_0 ((uint32_t)0x00004000)
+#define GPIO_OSPEEDER_OSPEEDR7_1 ((uint32_t)0x00008000)
+
+#define GPIO_OSPEEDER_OSPEEDR8 ((uint32_t)0x00030000)
+#define GPIO_OSPEEDER_OSPEEDR8_0 ((uint32_t)0x00010000)
+#define GPIO_OSPEEDER_OSPEEDR8_1 ((uint32_t)0x00020000)
+
+#define GPIO_OSPEEDER_OSPEEDR9 ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDER_OSPEEDR9_0 ((uint32_t)0x00040000)
+#define GPIO_OSPEEDER_OSPEEDR9_1 ((uint32_t)0x00080000)
+
+#define GPIO_OSPEEDER_OSPEEDR10 ((uint32_t)0x00300000)
+#define GPIO_OSPEEDER_OSPEEDR10_0 ((uint32_t)0x00100000)
+#define GPIO_OSPEEDER_OSPEEDR10_1 ((uint32_t)0x00200000)
+
+#define GPIO_OSPEEDER_OSPEEDR11 ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDER_OSPEEDR11_0 ((uint32_t)0x00400000)
+#define GPIO_OSPEEDER_OSPEEDR11_1 ((uint32_t)0x00800000)
+
+#define GPIO_OSPEEDER_OSPEEDR12 ((uint32_t)0x03000000)
+#define GPIO_OSPEEDER_OSPEEDR12_0 ((uint32_t)0x01000000)
+#define GPIO_OSPEEDER_OSPEEDR12_1 ((uint32_t)0x02000000)
+
+#define GPIO_OSPEEDER_OSPEEDR13 ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDER_OSPEEDR13_0 ((uint32_t)0x04000000)
+#define GPIO_OSPEEDER_OSPEEDR13_1 ((uint32_t)0x08000000)
+
+#define GPIO_OSPEEDER_OSPEEDR14 ((uint32_t)0x30000000)
+#define GPIO_OSPEEDER_OSPEEDR14_0 ((uint32_t)0x10000000)
+#define GPIO_OSPEEDER_OSPEEDR14_1 ((uint32_t)0x20000000)
+
+#define GPIO_OSPEEDER_OSPEEDR15 ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDER_OSPEEDR15_0 ((uint32_t)0x40000000)
+#define GPIO_OSPEEDER_OSPEEDR15_1 ((uint32_t)0x80000000)
+
+/****************** Bits definition for GPIO_PUPDR register *****************/
+#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
+
+#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
+
+#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
+
+#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
+
+#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
+
+#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
+
+#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
+
+#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
+
+#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
+
+#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
+
+#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
+
+#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
+
+#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
+
+#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
+
+#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
+
+#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
+
+/****************** Bits definition for GPIO_IDR register *******************/
+#define GPIO_IDR_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_IDR_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_IDR_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_IDR_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_IDR_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_IDR_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_IDR_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_IDR_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_IDR_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_IDR_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_IDR_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_IDR_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_IDR_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_IDR_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_IDR_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_IDR_IDR_15 ((uint32_t)0x00008000)
+/* Old GPIO_IDR register bits definition, maintained for legacy purpose */
+#define GPIO_OTYPER_IDR_0 GPIO_IDR_IDR_0
+#define GPIO_OTYPER_IDR_1 GPIO_IDR_IDR_1
+#define GPIO_OTYPER_IDR_2 GPIO_IDR_IDR_2
+#define GPIO_OTYPER_IDR_3 GPIO_IDR_IDR_3
+#define GPIO_OTYPER_IDR_4 GPIO_IDR_IDR_4
+#define GPIO_OTYPER_IDR_5 GPIO_IDR_IDR_5
+#define GPIO_OTYPER_IDR_6 GPIO_IDR_IDR_6
+#define GPIO_OTYPER_IDR_7 GPIO_IDR_IDR_7
+#define GPIO_OTYPER_IDR_8 GPIO_IDR_IDR_8
+#define GPIO_OTYPER_IDR_9 GPIO_IDR_IDR_9
+#define GPIO_OTYPER_IDR_10 GPIO_IDR_IDR_10
+#define GPIO_OTYPER_IDR_11 GPIO_IDR_IDR_11
+#define GPIO_OTYPER_IDR_12 GPIO_IDR_IDR_12
+#define GPIO_OTYPER_IDR_13 GPIO_IDR_IDR_13
+#define GPIO_OTYPER_IDR_14 GPIO_IDR_IDR_14
+#define GPIO_OTYPER_IDR_15 GPIO_IDR_IDR_15
+
+/****************** Bits definition for GPIO_ODR register *******************/
+#define GPIO_ODR_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_ODR_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_ODR_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_ODR_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_ODR_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_ODR_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_ODR_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_ODR_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_ODR_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_ODR_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_ODR_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_ODR_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_ODR_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_ODR_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_ODR_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_ODR_ODR_15 ((uint32_t)0x00008000)
+/* Old GPIO_ODR register bits definition, maintained for legacy purpose */
+#define GPIO_OTYPER_ODR_0 GPIO_ODR_ODR_0
+#define GPIO_OTYPER_ODR_1 GPIO_ODR_ODR_1
+#define GPIO_OTYPER_ODR_2 GPIO_ODR_ODR_2
+#define GPIO_OTYPER_ODR_3 GPIO_ODR_ODR_3
+#define GPIO_OTYPER_ODR_4 GPIO_ODR_ODR_4
+#define GPIO_OTYPER_ODR_5 GPIO_ODR_ODR_5
+#define GPIO_OTYPER_ODR_6 GPIO_ODR_ODR_6
+#define GPIO_OTYPER_ODR_7 GPIO_ODR_ODR_7
+#define GPIO_OTYPER_ODR_8 GPIO_ODR_ODR_8
+#define GPIO_OTYPER_ODR_9 GPIO_ODR_ODR_9
+#define GPIO_OTYPER_ODR_10 GPIO_ODR_ODR_10
+#define GPIO_OTYPER_ODR_11 GPIO_ODR_ODR_11
+#define GPIO_OTYPER_ODR_12 GPIO_ODR_ODR_12
+#define GPIO_OTYPER_ODR_13 GPIO_ODR_ODR_13
+#define GPIO_OTYPER_ODR_14 GPIO_ODR_ODR_14
+#define GPIO_OTYPER_ODR_15 GPIO_ODR_ODR_15
+
+/****************** Bits definition for GPIO_BSRR register ******************/
+#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register *********************/
+#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK ((uint32_t)0x00010000)
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface */
+/* */
+/******************************************************************************/
+/******************* Bit definition for I2C_CR1 register ********************/
+#define I2C_CR1_PE ((uint32_t)0x00000001) /*!<Peripheral Enable */
+#define I2C_CR1_SMBUS ((uint32_t)0x00000002) /*!<SMBus Mode */
+#define I2C_CR1_SMBTYPE ((uint32_t)0x00000008) /*!<SMBus Type */
+#define I2C_CR1_ENARP ((uint32_t)0x00000010) /*!<ARP Enable */
+#define I2C_CR1_ENPEC ((uint32_t)0x00000020) /*!<PEC Enable */
+#define I2C_CR1_ENGC ((uint32_t)0x00000040) /*!<General Call Enable */
+#define I2C_CR1_NOSTRETCH ((uint32_t)0x00000080) /*!<Clock Stretching Disable (Slave mode) */
+#define I2C_CR1_START ((uint32_t)0x00000100) /*!<Start Generation */
+#define I2C_CR1_STOP ((uint32_t)0x00000200) /*!<Stop Generation */
+#define I2C_CR1_ACK ((uint32_t)0x00000400) /*!<Acknowledge Enable */
+#define I2C_CR1_POS ((uint32_t)0x00000800) /*!<Acknowledge/PEC Position (for data reception) */
+#define I2C_CR1_PEC ((uint32_t)0x00001000) /*!<Packet Error Checking */
+#define I2C_CR1_ALERT ((uint32_t)0x00002000) /*!<SMBus Alert */
+#define I2C_CR1_SWRST ((uint32_t)0x00008000) /*!<Software Reset */
+
+/******************* Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_FREQ ((uint32_t)0x0000003F) /*!<FREQ[5:0] bits (Peripheral Clock Frequency) */
+#define I2C_CR2_FREQ_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define I2C_CR2_FREQ_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define I2C_CR2_FREQ_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define I2C_CR2_FREQ_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define I2C_CR2_FREQ_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define I2C_CR2_FREQ_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+
+#define I2C_CR2_ITERREN ((uint32_t)0x00000100) /*!<Error Interrupt Enable */
+#define I2C_CR2_ITEVTEN ((uint32_t)0x00000200) /*!<Event Interrupt Enable */
+#define I2C_CR2_ITBUFEN ((uint32_t)0x00000400) /*!<Buffer Interrupt Enable */
+#define I2C_CR2_DMAEN ((uint32_t)0x00000800) /*!<DMA Requests Enable */
+#define I2C_CR2_LAST ((uint32_t)0x00001000) /*!<DMA Last Transfer */
+
+/******************* Bit definition for I2C_OAR1 register *******************/
+#define I2C_OAR1_ADD1_7 ((uint32_t)0x000000FE) /*!<Interface Address */
+#define I2C_OAR1_ADD8_9 ((uint32_t)0x00000300) /*!<Interface Address */
+
+#define I2C_OAR1_ADD0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define I2C_OAR1_ADD1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define I2C_OAR1_ADD2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define I2C_OAR1_ADD3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define I2C_OAR1_ADD4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define I2C_OAR1_ADD5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define I2C_OAR1_ADD6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define I2C_OAR1_ADD7 ((uint32_t)0x00000080) /*!<Bit 7 */
+#define I2C_OAR1_ADD8 ((uint32_t)0x00000100) /*!<Bit 8 */
+#define I2C_OAR1_ADD9 ((uint32_t)0x00000200) /*!<Bit 9 */
+
+#define I2C_OAR1_ADDMODE ((uint32_t)0x00008000) /*!<Addressing Mode (Slave mode) */
+
+/******************* Bit definition for I2C_OAR2 register *******************/
+#define I2C_OAR2_ENDUAL ((uint32_t)0x00000001) /*!<Dual addressing mode enable */
+#define I2C_OAR2_ADD2 ((uint32_t)0x000000FE) /*!<Interface address */
+
+/******************** Bit definition for I2C_DR register ********************/
+#define I2C_DR_DR ((uint32_t)0x000000FF) /*!<8-bit Data Register */
+
+/******************* Bit definition for I2C_SR1 register ********************/
+#define I2C_SR1_SB ((uint32_t)0x00000001) /*!<Start Bit (Master mode) */
+#define I2C_SR1_ADDR ((uint32_t)0x00000002) /*!<Address sent (master mode)/matched (slave mode) */
+#define I2C_SR1_BTF ((uint32_t)0x00000004) /*!<Byte Transfer Finished */
+#define I2C_SR1_ADD10 ((uint32_t)0x00000008) /*!<10-bit header sent (Master mode) */
+#define I2C_SR1_STOPF ((uint32_t)0x00000010) /*!<Stop detection (Slave mode) */
+#define I2C_SR1_RXNE ((uint32_t)0x00000040) /*!<Data Register not Empty (receivers) */
+#define I2C_SR1_TXE ((uint32_t)0x00000080) /*!<Data Register Empty (transmitters) */
+#define I2C_SR1_BERR ((uint32_t)0x00000100) /*!<Bus Error */
+#define I2C_SR1_ARLO ((uint32_t)0x00000200) /*!<Arbitration Lost (master mode) */
+#define I2C_SR1_AF ((uint32_t)0x00000400) /*!<Acknowledge Failure */
+#define I2C_SR1_OVR ((uint32_t)0x00000800) /*!<Overrun/Underrun */
+#define I2C_SR1_PECERR ((uint32_t)0x00001000) /*!<PEC Error in reception */
+#define I2C_SR1_TIMEOUT ((uint32_t)0x00004000) /*!<Timeout or Tlow Error */
+#define I2C_SR1_SMBALERT ((uint32_t)0x00008000) /*!<SMBus Alert */
+
+/******************* Bit definition for I2C_SR2 register ********************/
+#define I2C_SR2_MSL ((uint32_t)0x00000001) /*!<Master/Slave */
+#define I2C_SR2_BUSY ((uint32_t)0x00000002) /*!<Bus Busy */
+#define I2C_SR2_TRA ((uint32_t)0x00000004) /*!<Transmitter/Receiver */
+#define I2C_SR2_GENCALL ((uint32_t)0x00000010) /*!<General Call Address (Slave mode) */
+#define I2C_SR2_SMBDEFAULT ((uint32_t)0x00000020) /*!<SMBus Device Default Address (Slave mode) */
+#define I2C_SR2_SMBHOST ((uint32_t)0x00000040) /*!<SMBus Host Header (Slave mode) */
+#define I2C_SR2_DUALF ((uint32_t)0x00000080) /*!<Dual Flag (Slave mode) */
+#define I2C_SR2_PEC ((uint32_t)0x0000FF00) /*!<Packet Error Checking Register */
+
+/******************* Bit definition for I2C_CCR register ********************/
+#define I2C_CCR_CCR ((uint32_t)0x00000FFF) /*!<Clock Control Register in Fast/Standard mode (Master mode) */
+#define I2C_CCR_DUTY ((uint32_t)0x00004000) /*!<Fast Mode Duty Cycle */
+#define I2C_CCR_FS ((uint32_t)0x00008000) /*!<I2C Master Mode Selection */
+
+/****************** Bit definition for I2C_TRISE register *******************/
+#define I2C_TRISE_TRISE ((uint32_t)0x0000003F) /*!<Maximum Rise Time in Fast/Standard mode (Master mode) */
+
+/****************** Bit definition for I2C_FLTR register *******************/
+#define I2C_FLTR_DNF ((uint32_t)0x0000000F) /*!<Digital Noise Filter */
+#define I2C_FLTR_ANOFF ((uint32_t)0x00000010) /*!<Analog Noise Filter OFF */
+
+/******************************************************************************/
+/* */
+/* Independent WATCHDOG */
+/* */
+/******************************************************************************/
+/******************* Bit definition for IWDG_KR register ********************/
+#define IWDG_KR_KEY ((uint32_t)0xFFFF) /*!<Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register ********************/
+#define IWDG_PR_PR ((uint32_t)0x07) /*!<PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint32_t)0x01) /*!<Bit 0 */
+#define IWDG_PR_PR_1 ((uint32_t)0x02) /*!<Bit 1 */
+#define IWDG_PR_PR_2 ((uint32_t)0x04) /*!<Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register *******************/
+#define IWDG_RLR_RL ((uint32_t)0x0FFF) /*!<Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register ********************/
+#define IWDG_SR_PVU ((uint32_t)0x01) /*!<Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint32_t)0x02) /*!<Watchdog counter reload value update */
+
+
+/******************************************************************************/
+/* */
+/* Power Control */
+/* */
+/******************************************************************************/
+/******************** Bit definition for PWR_CR register ********************/
+#define PWR_CR_LPDS ((uint32_t)0x00000001) /*!< Low-Power Deepsleep */
+#define PWR_CR_PDDS ((uint32_t)0x00000002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint32_t)0x00000004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint32_t)0x00000008) /*!< Clear Standby Flag */
+#define PWR_CR_PVDE ((uint32_t)0x00000010) /*!< Power Voltage Detector Enable */
+
+#define PWR_CR_PLS ((uint32_t)0x000000E0) /*!< PLS[2:0] bits (PVD Level Selection) */
+#define PWR_CR_PLS_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define PWR_CR_PLS_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define PWR_CR_PLS_2 ((uint32_t)0x00000080) /*!< Bit 2 */
+
+/*!< PVD level configuration */
+#define PWR_CR_PLS_LEV0 ((uint32_t)0x00000000) /*!< PVD level 0 */
+#define PWR_CR_PLS_LEV1 ((uint32_t)0x00000020) /*!< PVD level 1 */
+#define PWR_CR_PLS_LEV2 ((uint32_t)0x00000040) /*!< PVD level 2 */
+#define PWR_CR_PLS_LEV3 ((uint32_t)0x00000060) /*!< PVD level 3 */
+#define PWR_CR_PLS_LEV4 ((uint32_t)0x00000080) /*!< PVD level 4 */
+#define PWR_CR_PLS_LEV5 ((uint32_t)0x000000A0) /*!< PVD level 5 */
+#define PWR_CR_PLS_LEV6 ((uint32_t)0x000000C0) /*!< PVD level 6 */
+#define PWR_CR_PLS_LEV7 ((uint32_t)0x000000E0) /*!< PVD level 7 */
+
+#define PWR_CR_DBP ((uint32_t)0x00000100) /*!< Disable Backup Domain write protection */
+#define PWR_CR_FPDS ((uint32_t)0x00000200) /*!< Flash power down in Stop mode */
+#define PWR_CR_LPLVDS ((uint32_t)0x00000400) /*!< Low Power Regulator Low Voltage in Deep Sleep mode */
+#define PWR_CR_MRLVDS ((uint32_t)0x00000800) /*!< Main Regulator Low Voltage in Deep Sleep mode */
+#define PWR_CR_ADCDC1 ((uint32_t)0x00002000) /*!< Refer to AN4073 on how to use this bit */
+
+#define PWR_CR_VOS ((uint32_t)0x0000C000) /*!< VOS[1:0] bits (Regulator voltage scaling output selection) */
+#define PWR_CR_VOS_0 ((uint32_t)0x00004000) /*!< Bit 0 */
+#define PWR_CR_VOS_1 ((uint32_t)0x00008000) /*!< Bit 1 */
+
+#define PWR_CR_FMSSR ((uint32_t)0x00100000) /*!< Flash Memory Sleep System Run */
+#define PWR_CR_FISSR ((uint32_t)0x00200000) /*!< Flash Interface Stop while System Run */
+/* Legacy define */
+#define PWR_CR_PMODE PWR_CR_VOS
+
+/******************* Bit definition for PWR_CSR register ********************/
+#define PWR_CSR_WUF ((uint32_t)0x00000001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint32_t)0x00000002) /*!< Standby Flag */
+#define PWR_CSR_PVDO ((uint32_t)0x00000004) /*!< PVD Output */
+#define PWR_CSR_BRR ((uint32_t)0x00000008) /*!< Backup regulator ready */
+#define PWR_CSR_EWUP ((uint32_t)0x00000100) /*!< Enable WKUP pin */
+#define PWR_CSR_BRE ((uint32_t)0x00000200) /*!< Backup regulator enable */
+#define PWR_CSR_VOSRDY ((uint32_t)0x00004000) /*!< Regulator voltage scaling output selection ready */
+
+/* Legacy define */
+#define PWR_CSR_REGRDY PWR_CSR_VOSRDY
+
+/******************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/******************************************************************************/
+/******************** Bit definition for RCC_CR register ********************/
+#define RCC_CR_HSION ((uint32_t)0x00000001)
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002)
+
+#define RCC_CR_HSITRIM ((uint32_t)0x000000F8)
+#define RCC_CR_HSITRIM_0 ((uint32_t)0x00000008)/*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 ((uint32_t)0x00000010)/*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 ((uint32_t)0x00000020)/*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 ((uint32_t)0x00000040)/*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 ((uint32_t)0x00000080)/*!<Bit 4 */
+
+#define RCC_CR_HSICAL ((uint32_t)0x0000FF00)
+#define RCC_CR_HSICAL_0 ((uint32_t)0x00000100)/*!<Bit 0 */
+#define RCC_CR_HSICAL_1 ((uint32_t)0x00000200)/*!<Bit 1 */
+#define RCC_CR_HSICAL_2 ((uint32_t)0x00000400)/*!<Bit 2 */
+#define RCC_CR_HSICAL_3 ((uint32_t)0x00000800)/*!<Bit 3 */
+#define RCC_CR_HSICAL_4 ((uint32_t)0x00001000)/*!<Bit 4 */
+#define RCC_CR_HSICAL_5 ((uint32_t)0x00002000)/*!<Bit 5 */
+#define RCC_CR_HSICAL_6 ((uint32_t)0x00004000)/*!<Bit 6 */
+#define RCC_CR_HSICAL_7 ((uint32_t)0x00008000)/*!<Bit 7 */
+
+#define RCC_CR_HSEON ((uint32_t)0x00010000)
+#define RCC_CR_HSERDY ((uint32_t)0x00020000)
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000)
+#define RCC_CR_CSSON ((uint32_t)0x00080000)
+#define RCC_CR_PLLON ((uint32_t)0x01000000)
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000)
+#define RCC_CR_PLLI2SON ((uint32_t)0x04000000)
+#define RCC_CR_PLLI2SRDY ((uint32_t)0x08000000)
+
+/******************** Bit definition for RCC_PLLCFGR register ***************/
+#define RCC_PLLCFGR_PLLM ((uint32_t)0x0000003F)
+#define RCC_PLLCFGR_PLLM_0 ((uint32_t)0x00000001)
+#define RCC_PLLCFGR_PLLM_1 ((uint32_t)0x00000002)
+#define RCC_PLLCFGR_PLLM_2 ((uint32_t)0x00000004)
+#define RCC_PLLCFGR_PLLM_3 ((uint32_t)0x00000008)
+#define RCC_PLLCFGR_PLLM_4 ((uint32_t)0x00000010)
+#define RCC_PLLCFGR_PLLM_5 ((uint32_t)0x00000020)
+
+#define RCC_PLLCFGR_PLLN ((uint32_t)0x00007FC0)
+#define RCC_PLLCFGR_PLLN_0 ((uint32_t)0x00000040)
+#define RCC_PLLCFGR_PLLN_1 ((uint32_t)0x00000080)
+#define RCC_PLLCFGR_PLLN_2 ((uint32_t)0x00000100)
+#define RCC_PLLCFGR_PLLN_3 ((uint32_t)0x00000200)
+#define RCC_PLLCFGR_PLLN_4 ((uint32_t)0x00000400)
+#define RCC_PLLCFGR_PLLN_5 ((uint32_t)0x00000800)
+#define RCC_PLLCFGR_PLLN_6 ((uint32_t)0x00001000)
+#define RCC_PLLCFGR_PLLN_7 ((uint32_t)0x00002000)
+#define RCC_PLLCFGR_PLLN_8 ((uint32_t)0x00004000)
+
+#define RCC_PLLCFGR_PLLP ((uint32_t)0x00030000)
+#define RCC_PLLCFGR_PLLP_0 ((uint32_t)0x00010000)
+#define RCC_PLLCFGR_PLLP_1 ((uint32_t)0x00020000)
+
+#define RCC_PLLCFGR_PLLSRC ((uint32_t)0x00400000)
+#define RCC_PLLCFGR_PLLSRC_HSE ((uint32_t)0x00400000)
+#define RCC_PLLCFGR_PLLSRC_HSI ((uint32_t)0x00000000)
+
+#define RCC_PLLCFGR_PLLQ ((uint32_t)0x0F000000)
+#define RCC_PLLCFGR_PLLQ_0 ((uint32_t)0x01000000)
+#define RCC_PLLCFGR_PLLQ_1 ((uint32_t)0x02000000)
+#define RCC_PLLCFGR_PLLQ_2 ((uint32_t)0x04000000)
+#define RCC_PLLCFGR_PLLQ_3 ((uint32_t)0x08000000)
+
+/******************** Bit definition for RCC_CFGR register ******************/
+/*!< SW configuration */
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+/*!< PPRE1 configuration */
+#define RCC_CFGR_PPRE1 ((uint32_t)0x00001C00) /*!< PRE1[2:0] bits (APB1 prescaler) */
+#define RCC_CFGR_PPRE1_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define RCC_CFGR_PPRE1_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define RCC_CFGR_PPRE1_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE1_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE1_DIV2 ((uint32_t)0x00001000) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE1_DIV4 ((uint32_t)0x00001400) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE1_DIV8 ((uint32_t)0x00001800) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE1_DIV16 ((uint32_t)0x00001C00) /*!< HCLK divided by 16 */
+
+/*!< PPRE2 configuration */
+#define RCC_CFGR_PPRE2 ((uint32_t)0x0000E000) /*!< PRE2[2:0] bits (APB2 prescaler) */
+#define RCC_CFGR_PPRE2_0 ((uint32_t)0x00002000) /*!< Bit 0 */
+#define RCC_CFGR_PPRE2_1 ((uint32_t)0x00004000) /*!< Bit 1 */
+#define RCC_CFGR_PPRE2_2 ((uint32_t)0x00008000) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE2_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE2_DIV2 ((uint32_t)0x00008000) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE2_DIV4 ((uint32_t)0x0000A000) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE2_DIV8 ((uint32_t)0x0000C000) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE2_DIV16 ((uint32_t)0x0000E000) /*!< HCLK divided by 16 */
+
+/*!< RTCPRE configuration */
+#define RCC_CFGR_RTCPRE ((uint32_t)0x001F0000)
+#define RCC_CFGR_RTCPRE_0 ((uint32_t)0x00010000)
+#define RCC_CFGR_RTCPRE_1 ((uint32_t)0x00020000)
+#define RCC_CFGR_RTCPRE_2 ((uint32_t)0x00040000)
+#define RCC_CFGR_RTCPRE_3 ((uint32_t)0x00080000)
+#define RCC_CFGR_RTCPRE_4 ((uint32_t)0x00100000)
+
+/*!< MCO1 configuration */
+#define RCC_CFGR_MCO1 ((uint32_t)0x00600000)
+#define RCC_CFGR_MCO1_0 ((uint32_t)0x00200000)
+#define RCC_CFGR_MCO1_1 ((uint32_t)0x00400000)
+
+#define RCC_CFGR_I2SSRC ((uint32_t)0x00800000)
+
+#define RCC_CFGR_MCO1PRE ((uint32_t)0x07000000)
+#define RCC_CFGR_MCO1PRE_0 ((uint32_t)0x01000000)
+#define RCC_CFGR_MCO1PRE_1 ((uint32_t)0x02000000)
+#define RCC_CFGR_MCO1PRE_2 ((uint32_t)0x04000000)
+
+#define RCC_CFGR_MCO2PRE ((uint32_t)0x38000000)
+#define RCC_CFGR_MCO2PRE_0 ((uint32_t)0x08000000)
+#define RCC_CFGR_MCO2PRE_1 ((uint32_t)0x10000000)
+#define RCC_CFGR_MCO2PRE_2 ((uint32_t)0x20000000)
+
+#define RCC_CFGR_MCO2 ((uint32_t)0xC0000000)
+#define RCC_CFGR_MCO2_0 ((uint32_t)0x40000000)
+#define RCC_CFGR_MCO2_1 ((uint32_t)0x80000000)
+
+/******************** Bit definition for RCC_CIR register *******************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001)
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002)
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004)
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008)
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010)
+#define RCC_CIR_PLLI2SRDYF ((uint32_t)0x00000020)
+
+#define RCC_CIR_CSSF ((uint32_t)0x00000080)
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100)
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200)
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400)
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800)
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000)
+#define RCC_CIR_PLLI2SRDYIE ((uint32_t)0x00002000)
+
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000)
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000)
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000)
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000)
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000)
+#define RCC_CIR_PLLI2SRDYC ((uint32_t)0x00200000)
+
+#define RCC_CIR_CSSC ((uint32_t)0x00800000)
+
+/******************** Bit definition for RCC_AHB1RSTR register **************/
+#define RCC_AHB1RSTR_GPIOARST ((uint32_t)0x00000001)
+#define RCC_AHB1RSTR_GPIOBRST ((uint32_t)0x00000002)
+#define RCC_AHB1RSTR_GPIOCRST ((uint32_t)0x00000004)
+#define RCC_AHB1RSTR_GPIODRST ((uint32_t)0x00000008)
+#define RCC_AHB1RSTR_GPIOERST ((uint32_t)0x00000010)
+#define RCC_AHB1RSTR_GPIOHRST ((uint32_t)0x00000080)
+#define RCC_AHB1RSTR_CRCRST ((uint32_t)0x00001000)
+#define RCC_AHB1RSTR_DMA1RST ((uint32_t)0x00200000)
+#define RCC_AHB1RSTR_DMA2RST ((uint32_t)0x00400000)
+
+/******************** Bit definition for RCC_AHB2RSTR register **************/
+#define RCC_AHB2RSTR_OTGFSRST ((uint32_t)0x00000080)
+
+/******************** Bit definition for RCC_AHB3RSTR register **************/
+
+/******************** Bit definition for RCC_APB1RSTR register **************/
+#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001)
+#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002)
+#define RCC_APB1RSTR_TIM4RST ((uint32_t)0x00000004)
+#define RCC_APB1RSTR_TIM5RST ((uint32_t)0x00000008)
+#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800)
+#define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000)
+#define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00008000)
+#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000)
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000)
+#define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000)
+#define RCC_APB1RSTR_I2C3RST ((uint32_t)0x00800000)
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000)
+
+/******************** Bit definition for RCC_APB2RSTR register **************/
+#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000001)
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00000010)
+#define RCC_APB2RSTR_USART6RST ((uint32_t)0x00000020)
+#define RCC_APB2RSTR_ADCRST ((uint32_t)0x00000100)
+#define RCC_APB2RSTR_SDIORST ((uint32_t)0x00000800)
+#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000)
+#define RCC_APB2RSTR_SPI4RST ((uint32_t)0x00002000)
+#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00004000)
+#define RCC_APB2RSTR_TIM9RST ((uint32_t)0x00010000)
+#define RCC_APB2RSTR_TIM10RST ((uint32_t)0x00020000)
+#define RCC_APB2RSTR_TIM11RST ((uint32_t)0x00040000)
+#define RCC_APB2RSTR_SPI5RST ((uint32_t)0x00100000)
+
+/* Old SPI1RST bit definition, maintained for legacy purpose */
+#define RCC_APB2RSTR_SPI1 RCC_APB2RSTR_SPI1RST
+
+/******************** Bit definition for RCC_AHB1ENR register ***************/
+#define RCC_AHB1ENR_GPIOAEN ((uint32_t)0x00000001)
+#define RCC_AHB1ENR_GPIOBEN ((uint32_t)0x00000002)
+#define RCC_AHB1ENR_GPIOCEN ((uint32_t)0x00000004)
+#define RCC_AHB1ENR_GPIODEN ((uint32_t)0x00000008)
+#define RCC_AHB1ENR_GPIOEEN ((uint32_t)0x00000010)
+#define RCC_AHB1ENR_GPIOHEN ((uint32_t)0x00000080)
+#define RCC_AHB1ENR_CRCEN ((uint32_t)0x00001000)
+#define RCC_AHB1ENR_BKPSRAMEN ((uint32_t)0x00040000)
+#define RCC_AHB1ENR_CCMDATARAMEN ((uint32_t)0x00100000)
+#define RCC_AHB1ENR_DMA1EN ((uint32_t)0x00200000)
+#define RCC_AHB1ENR_DMA2EN ((uint32_t)0x00400000)
+
+/******************** Bit definition for RCC_AHB2ENR register ***************/
+#define RCC_AHB2ENR_OTGFSEN ((uint32_t)0x00000080)
+
+/******************** Bit definition for RCC_AHB3ENR register ***************/
+
+/******************** Bit definition for RCC_APB1ENR register ***************/
+#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001)
+#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002)
+#define RCC_APB1ENR_TIM4EN ((uint32_t)0x00000004)
+#define RCC_APB1ENR_TIM5EN ((uint32_t)0x00000008)
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800)
+#define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000)
+#define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000)
+#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000)
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000)
+#define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000)
+#define RCC_APB1ENR_I2C3EN ((uint32_t)0x00800000)
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000)
+
+/******************** Bit definition for RCC_APB2ENR register ***************/
+#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000001)
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00000010)
+#define RCC_APB2ENR_USART6EN ((uint32_t)0x00000020)
+#define RCC_APB2ENR_ADC1EN ((uint32_t)0x00000100)
+#define RCC_APB2ENR_SDIOEN ((uint32_t)0x00000800)
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000)
+#define RCC_APB2ENR_SPI4EN ((uint32_t)0x00002000)
+#define RCC_APB2ENR_SYSCFGEN ((uint32_t)0x00004000)
+#define RCC_APB2ENR_TIM9EN ((uint32_t)0x00010000)
+#define RCC_APB2ENR_TIM10EN ((uint32_t)0x00020000)
+#define RCC_APB2ENR_TIM11EN ((uint32_t)0x00040000)
+#define RCC_APB2ENR_SPI5EN ((uint32_t)0x00100000)
+
+/******************** Bit definition for RCC_AHB1LPENR register *************/
+#define RCC_AHB1LPENR_GPIOALPEN ((uint32_t)0x00000001)
+#define RCC_AHB1LPENR_GPIOBLPEN ((uint32_t)0x00000002)
+#define RCC_AHB1LPENR_GPIOCLPEN ((uint32_t)0x00000004)
+#define RCC_AHB1LPENR_GPIODLPEN ((uint32_t)0x00000008)
+#define RCC_AHB1LPENR_GPIOELPEN ((uint32_t)0x00000010)
+#define RCC_AHB1LPENR_GPIOHLPEN ((uint32_t)0x00000080)
+#define RCC_AHB1LPENR_CRCLPEN ((uint32_t)0x00001000)
+#define RCC_AHB1LPENR_FLITFLPEN ((uint32_t)0x00008000)
+#define RCC_AHB1LPENR_SRAM1LPEN ((uint32_t)0x00010000)
+#define RCC_AHB1LPENR_SRAM2LPEN ((uint32_t)0x00020000)
+#define RCC_AHB1LPENR_BKPSRAMLPEN ((uint32_t)0x00040000)
+#define RCC_AHB1LPENR_SRAM3LPEN ((uint32_t)0x00080000)
+#define RCC_AHB1LPENR_DMA1LPEN ((uint32_t)0x00200000)
+#define RCC_AHB1LPENR_DMA2LPEN ((uint32_t)0x00400000)
+
+/******************** Bit definition for RCC_AHB2LPENR register *************/
+#define RCC_AHB2LPENR_OTGFSLPEN ((uint32_t)0x00000080)
+
+/******************** Bit definition for RCC_AHB3LPENR register *************/
+
+/******************** Bit definition for RCC_APB1LPENR register *************/
+#define RCC_APB1LPENR_TIM2LPEN ((uint32_t)0x00000001)
+#define RCC_APB1LPENR_TIM3LPEN ((uint32_t)0x00000002)
+#define RCC_APB1LPENR_TIM4LPEN ((uint32_t)0x00000004)
+#define RCC_APB1LPENR_TIM5LPEN ((uint32_t)0x00000008)
+#define RCC_APB1LPENR_WWDGLPEN ((uint32_t)0x00000800)
+#define RCC_APB1LPENR_SPI2LPEN ((uint32_t)0x00004000)
+#define RCC_APB1LPENR_SPI3LPEN ((uint32_t)0x00008000)
+#define RCC_APB1LPENR_USART2LPEN ((uint32_t)0x00020000)
+#define RCC_APB1LPENR_I2C1LPEN ((uint32_t)0x00200000)
+#define RCC_APB1LPENR_I2C2LPEN ((uint32_t)0x00400000)
+#define RCC_APB1LPENR_I2C3LPEN ((uint32_t)0x00800000)
+#define RCC_APB1LPENR_PWRLPEN ((uint32_t)0x10000000)
+#define RCC_APB1LPENR_DACLPEN ((uint32_t)0x20000000)
+
+/******************** Bit definition for RCC_APB2LPENR register *************/
+#define RCC_APB2LPENR_TIM1LPEN ((uint32_t)0x00000001)
+#define RCC_APB2LPENR_USART1LPEN ((uint32_t)0x00000010)
+#define RCC_APB2LPENR_USART6LPEN ((uint32_t)0x00000020)
+#define RCC_APB2LPENR_ADC1LPEN ((uint32_t)0x00000100)
+#define RCC_APB2LPENR_SDIOLPEN ((uint32_t)0x00000800)
+#define RCC_APB2LPENR_SPI1LPEN ((uint32_t)0x00001000)
+#define RCC_APB2LPENR_SPI4LPEN ((uint32_t)0x00002000)
+#define RCC_APB2LPENR_SYSCFGLPEN ((uint32_t)0x00004000)
+#define RCC_APB2LPENR_TIM9LPEN ((uint32_t)0x00010000)
+#define RCC_APB2LPENR_TIM10LPEN ((uint32_t)0x00020000)
+#define RCC_APB2LPENR_TIM11LPEN ((uint32_t)0x00040000)
+#define RCC_APB2LPENR_SPI5LPEN ((uint32_t)0x00100000)
+
+/******************** Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSEON ((uint32_t)0x00000001)
+#define RCC_BDCR_LSERDY ((uint32_t)0x00000002)
+#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004)
+#define RCC_BDCR_LSEMOD ((uint32_t)0x00000008)
+
+#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300)
+#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100)
+#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200)
+
+#define RCC_BDCR_RTCEN ((uint32_t)0x00008000)
+#define RCC_BDCR_BDRST ((uint32_t)0x00010000)
+
+/******************** Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001)
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002)
+#define RCC_CSR_RMVF ((uint32_t)0x01000000)
+#define RCC_CSR_BORRSTF ((uint32_t)0x02000000)
+#define RCC_CSR_PADRSTF ((uint32_t)0x04000000)
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000)
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000)
+#define RCC_CSR_WDGRSTF ((uint32_t)0x20000000)
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000)
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000)
+
+/******************** Bit definition for RCC_SSCGR register *****************/
+#define RCC_SSCGR_MODPER ((uint32_t)0x00001FFF)
+#define RCC_SSCGR_INCSTEP ((uint32_t)0x0FFFE000)
+#define RCC_SSCGR_SPREADSEL ((uint32_t)0x40000000)
+#define RCC_SSCGR_SSCGEN ((uint32_t)0x80000000)
+
+/******************** Bit definition for RCC_PLLI2SCFGR register ************/
+#define RCC_PLLI2SCFGR_PLLI2SM ((uint32_t)0x0000003F)
+#define RCC_PLLI2SCFGR_PLLI2SM_0 ((uint32_t)0x00000001)
+#define RCC_PLLI2SCFGR_PLLI2SM_1 ((uint32_t)0x00000002)
+#define RCC_PLLI2SCFGR_PLLI2SM_2 ((uint32_t)0x00000004)
+#define RCC_PLLI2SCFGR_PLLI2SM_3 ((uint32_t)0x00000008)
+#define RCC_PLLI2SCFGR_PLLI2SM_4 ((uint32_t)0x00000010)
+#define RCC_PLLI2SCFGR_PLLI2SM_5 ((uint32_t)0x00000020)
+
+#define RCC_PLLI2SCFGR_PLLI2SN ((uint32_t)0x00007FC0)
+#define RCC_PLLI2SCFGR_PLLI2SN_0 ((uint32_t)0x00000040)
+#define RCC_PLLI2SCFGR_PLLI2SN_1 ((uint32_t)0x00000080)
+#define RCC_PLLI2SCFGR_PLLI2SN_2 ((uint32_t)0x00000100)
+#define RCC_PLLI2SCFGR_PLLI2SN_3 ((uint32_t)0x00000200)
+#define RCC_PLLI2SCFGR_PLLI2SN_4 ((uint32_t)0x00000400)
+#define RCC_PLLI2SCFGR_PLLI2SN_5 ((uint32_t)0x00000800)
+#define RCC_PLLI2SCFGR_PLLI2SN_6 ((uint32_t)0x00001000)
+#define RCC_PLLI2SCFGR_PLLI2SN_7 ((uint32_t)0x00002000)
+#define RCC_PLLI2SCFGR_PLLI2SN_8 ((uint32_t)0x00004000)
+
+#define RCC_PLLI2SCFGR_PLLI2SR ((uint32_t)0x70000000)
+#define RCC_PLLI2SCFGR_PLLI2SR_0 ((uint32_t)0x10000000)
+#define RCC_PLLI2SCFGR_PLLI2SR_1 ((uint32_t)0x20000000)
+#define RCC_PLLI2SCFGR_PLLI2SR_2 ((uint32_t)0x40000000)
+
+
+/******************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for RTC_TR register *******************/
+#define RTC_TR_PM ((uint32_t)0x00400000)
+#define RTC_TR_HT ((uint32_t)0x00300000)
+#define RTC_TR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TR_HU ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TR_MNT ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TR_MNU ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TR_ST ((uint32_t)0x00000070)
+#define RTC_TR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TR_SU ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_DR register *******************/
+#define RTC_DR_YT ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0 ((uint32_t)0x00100000)
+#define RTC_DR_YT_1 ((uint32_t)0x00200000)
+#define RTC_DR_YT_2 ((uint32_t)0x00400000)
+#define RTC_DR_YT_3 ((uint32_t)0x00800000)
+#define RTC_DR_YU ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0 ((uint32_t)0x00010000)
+#define RTC_DR_YU_1 ((uint32_t)0x00020000)
+#define RTC_DR_YU_2 ((uint32_t)0x00040000)
+#define RTC_DR_YU_3 ((uint32_t)0x00080000)
+#define RTC_DR_WDU ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_DR_MT ((uint32_t)0x00001000)
+#define RTC_DR_MU ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0 ((uint32_t)0x00000100)
+#define RTC_DR_MU_1 ((uint32_t)0x00000200)
+#define RTC_DR_MU_2 ((uint32_t)0x00000400)
+#define RTC_DR_MU_3 ((uint32_t)0x00000800)
+#define RTC_DR_DT ((uint32_t)0x00000030)
+#define RTC_DR_DT_0 ((uint32_t)0x00000010)
+#define RTC_DR_DT_1 ((uint32_t)0x00000020)
+#define RTC_DR_DU ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0 ((uint32_t)0x00000001)
+#define RTC_DR_DU_1 ((uint32_t)0x00000002)
+#define RTC_DR_DU_2 ((uint32_t)0x00000004)
+#define RTC_DR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_CR register *******************/
+#define RTC_CR_COE ((uint32_t)0x00800000)
+#define RTC_CR_OSEL ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
+#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_COSEL ((uint32_t)0x00080000)
+#define RTC_CR_BCK ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H ((uint32_t)0x00010000)
+#define RTC_CR_TSIE ((uint32_t)0x00008000)
+#define RTC_CR_WUTIE ((uint32_t)0x00004000)
+#define RTC_CR_ALRBIE ((uint32_t)0x00002000)
+#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
+#define RTC_CR_TSE ((uint32_t)0x00000800)
+#define RTC_CR_WUTE ((uint32_t)0x00000400)
+#define RTC_CR_ALRBE ((uint32_t)0x00000200)
+#define RTC_CR_ALRAE ((uint32_t)0x00000100)
+#define RTC_CR_DCE ((uint32_t)0x00000080)
+#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
+#define RTC_CR_WUCKSEL ((uint32_t)0x00000007)
+#define RTC_CR_WUCKSEL_0 ((uint32_t)0x00000001)
+#define RTC_CR_WUCKSEL_1 ((uint32_t)0x00000002)
+#define RTC_CR_WUCKSEL_2 ((uint32_t)0x00000004)
+
+/******************** Bits definition for RTC_ISR register ******************/
+#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
+#define RTC_ISR_TAMP2F ((uint32_t)0x00004000)
+#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
+#define RTC_ISR_TSF ((uint32_t)0x00000800)
+#define RTC_ISR_WUTF ((uint32_t)0x00000400)
+#define RTC_ISR_ALRBF ((uint32_t)0x00000200)
+#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
+#define RTC_ISR_INIT ((uint32_t)0x00000080)
+#define RTC_ISR_INITF ((uint32_t)0x00000040)
+#define RTC_ISR_RSF ((uint32_t)0x00000020)
+#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF ((uint32_t)0x00000008)
+#define RTC_ISR_WUTWF ((uint32_t)0x00000004)
+#define RTC_ISR_ALRBWF ((uint32_t)0x00000002)
+#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_PRER register *****************/
+#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00001FFF)
+
+/******************** Bits definition for RTC_WUTR register *****************/
+#define RTC_WUTR_WUT ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CALIBR register ***************/
+#define RTC_CALIBR_DCS ((uint32_t)0x00000080)
+#define RTC_CALIBR_DC ((uint32_t)0x0000001F)
+
+/******************** Bits definition for RTC_ALRMAR register ***************/
+#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_ALRMBR register ***************/
+#define RTC_ALRMBR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMBR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMBR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMBR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMBR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMBR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMBR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMBR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMBR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMBR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMBR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMBR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMBR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMBR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMBR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMBR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMBR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMBR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMBR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMBR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMBR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMBR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMBR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMBR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMBR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMBR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMBR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMBR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMBR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMBR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMBR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMBR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMBR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMBR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMBR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMBR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMBR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMBR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMBR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMBR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_WPR register ******************/
+#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+
+/******************** Bits definition for RTC_SSR register ******************/
+#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_SHIFTR register ***************/
+#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
+
+/******************** Bits definition for RTC_TSTR register *****************/
+#define RTC_TSTR_PM ((uint32_t)0x00400000)
+#define RTC_TSTR_HT ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TSTR_HU ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TSTR_ST ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TSTR_SU ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSDR register *****************/
+#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_TSDR_MT ((uint32_t)0x00001000)
+#define RTC_TSDR_MU ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
+#define RTC_TSDR_DT ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
+#define RTC_TSDR_DU ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSSSR register ****************/
+#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CAL register *****************/
+#define RTC_CALR_CALP ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
+#define RTC_CALR_CALM ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
+
+/******************** Bits definition for RTC_TAFCR register ****************/
+#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TSINSEL ((uint32_t)0x00020000)
+#define RTC_TAFCR_TAMPINSEL ((uint32_t)0x00010000)
+#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010)
+#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008)
+#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_ALRMASSR register *************/
+#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_ALRMBSSR register *************/
+#define RTC_ALRMBSSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMBSSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMBSSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMBSSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMBSSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMBSSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_BKP0R register ****************/
+#define RTC_BKP0R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP1R register ****************/
+#define RTC_BKP1R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP2R register ****************/
+#define RTC_BKP2R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP3R register ****************/
+#define RTC_BKP3R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP4R register ****************/
+#define RTC_BKP4R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP5R register ****************/
+#define RTC_BKP5R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP6R register ****************/
+#define RTC_BKP6R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP7R register ****************/
+#define RTC_BKP7R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP8R register ****************/
+#define RTC_BKP8R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP9R register ****************/
+#define RTC_BKP9R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP10R register ***************/
+#define RTC_BKP10R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP11R register ***************/
+#define RTC_BKP11R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP12R register ***************/
+#define RTC_BKP12R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP13R register ***************/
+#define RTC_BKP13R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP14R register ***************/
+#define RTC_BKP14R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP15R register ***************/
+#define RTC_BKP15R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP16R register ***************/
+#define RTC_BKP16R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP17R register ***************/
+#define RTC_BKP17R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP18R register ***************/
+#define RTC_BKP18R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP19R register ***************/
+#define RTC_BKP19R ((uint32_t)0xFFFFFFFF)
+
+
+
+/******************************************************************************/
+/* */
+/* SD host Interface */
+/* */
+/******************************************************************************/
+/****************** Bit definition for SDIO_POWER register ******************/
+#define SDIO_POWER_PWRCTRL ((uint32_t)0x03) /*!<PWRCTRL[1:0] bits (Power supply control bits) */
+#define SDIO_POWER_PWRCTRL_0 ((uint32_t)0x01) /*!<Bit 0 */
+#define SDIO_POWER_PWRCTRL_1 ((uint32_t)0x02) /*!<Bit 1 */
+
+/****************** Bit definition for SDIO_CLKCR register ******************/
+#define SDIO_CLKCR_CLKDIV ((uint32_t)0x00FF) /*!<Clock divide factor */
+#define SDIO_CLKCR_CLKEN ((uint32_t)0x0100) /*!<Clock enable bit */
+#define SDIO_CLKCR_PWRSAV ((uint32_t)0x0200) /*!<Power saving configuration bit */
+#define SDIO_CLKCR_BYPASS ((uint32_t)0x0400) /*!<Clock divider bypass enable bit */
+
+#define SDIO_CLKCR_WIDBUS ((uint32_t)0x1800) /*!<WIDBUS[1:0] bits (Wide bus mode enable bit) */
+#define SDIO_CLKCR_WIDBUS_0 ((uint32_t)0x0800) /*!<Bit 0 */
+#define SDIO_CLKCR_WIDBUS_1 ((uint32_t)0x1000) /*!<Bit 1 */
+
+#define SDIO_CLKCR_NEGEDGE ((uint32_t)0x2000) /*!<SDIO_CK dephasing selection bit */
+#define SDIO_CLKCR_HWFC_EN ((uint32_t)0x4000) /*!<HW Flow Control enable */
+
+/******************* Bit definition for SDIO_ARG register *******************/
+#define SDIO_ARG_CMDARG ((uint32_t)0xFFFFFFFF) /*!<Command argument */
+
+/******************* Bit definition for SDIO_CMD register *******************/
+#define SDIO_CMD_CMDINDEX ((uint32_t)0x003F) /*!<Command Index */
+
+#define SDIO_CMD_WAITRESP ((uint32_t)0x00C0) /*!<WAITRESP[1:0] bits (Wait for response bits) */
+#define SDIO_CMD_WAITRESP_0 ((uint32_t)0x0040) /*!< Bit 0 */
+#define SDIO_CMD_WAITRESP_1 ((uint32_t)0x0080) /*!< Bit 1 */
+
+#define SDIO_CMD_WAITINT ((uint32_t)0x0100) /*!<CPSM Waits for Interrupt Request */
+#define SDIO_CMD_WAITPEND ((uint32_t)0x0200) /*!<CPSM Waits for ends of data transfer (CmdPend internal signal) */
+#define SDIO_CMD_CPSMEN ((uint32_t)0x0400) /*!<Command path state machine (CPSM) Enable bit */
+#define SDIO_CMD_SDIOSUSPEND ((uint32_t)0x0800) /*!<SD I/O suspend command */
+#define SDIO_CMD_ENCMDCOMPL ((uint32_t)0x1000) /*!<Enable CMD completion */
+#define SDIO_CMD_NIEN ((uint32_t)0x2000) /*!<Not Interrupt Enable */
+#define SDIO_CMD_CEATACMD ((uint32_t)0x4000) /*!<CE-ATA command */
+
+/***************** Bit definition for SDIO_RESPCMD register *****************/
+#define SDIO_RESPCMD_RESPCMD ((uint32_t)0x3F) /*!<Response command index */
+
+/****************** Bit definition for SDIO_RESP0 register ******************/
+#define SDIO_RESP0_CARDSTATUS0 ((uint32_t)0xFFFFFFFF) /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP1 register ******************/
+#define SDIO_RESP1_CARDSTATUS1 ((uint32_t)0xFFFFFFFF) /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP2 register ******************/
+#define SDIO_RESP2_CARDSTATUS2 ((uint32_t)0xFFFFFFFF) /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP3 register ******************/
+#define SDIO_RESP3_CARDSTATUS3 ((uint32_t)0xFFFFFFFF) /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP4 register ******************/
+#define SDIO_RESP4_CARDSTATUS4 ((uint32_t)0xFFFFFFFF) /*!<Card Status */
+
+/****************** Bit definition for SDIO_DTIMER register *****************/
+#define SDIO_DTIMER_DATATIME ((uint32_t)0xFFFFFFFF) /*!<Data timeout period. */
+
+/****************** Bit definition for SDIO_DLEN register *******************/
+#define SDIO_DLEN_DATALENGTH ((uint32_t)0x01FFFFFF) /*!<Data length value */
+
+/****************** Bit definition for SDIO_DCTRL register ******************/
+#define SDIO_DCTRL_DTEN ((uint32_t)0x0001) /*!<Data transfer enabled bit */
+#define SDIO_DCTRL_DTDIR ((uint32_t)0x0002) /*!<Data transfer direction selection */
+#define SDIO_DCTRL_DTMODE ((uint32_t)0x0004) /*!<Data transfer mode selection */
+#define SDIO_DCTRL_DMAEN ((uint32_t)0x0008) /*!<DMA enabled bit */
+
+#define SDIO_DCTRL_DBLOCKSIZE ((uint32_t)0x00F0) /*!<DBLOCKSIZE[3:0] bits (Data block size) */
+#define SDIO_DCTRL_DBLOCKSIZE_0 ((uint32_t)0x0010) /*!<Bit 0 */
+#define SDIO_DCTRL_DBLOCKSIZE_1 ((uint32_t)0x0020) /*!<Bit 1 */
+#define SDIO_DCTRL_DBLOCKSIZE_2 ((uint32_t)0x0040) /*!<Bit 2 */
+#define SDIO_DCTRL_DBLOCKSIZE_3 ((uint32_t)0x0080) /*!<Bit 3 */
+
+#define SDIO_DCTRL_RWSTART ((uint32_t)0x0100) /*!<Read wait start */
+#define SDIO_DCTRL_RWSTOP ((uint32_t)0x0200) /*!<Read wait stop */
+#define SDIO_DCTRL_RWMOD ((uint32_t)0x0400) /*!<Read wait mode */
+#define SDIO_DCTRL_SDIOEN ((uint32_t)0x0800) /*!<SD I/O enable functions */
+
+/****************** Bit definition for SDIO_DCOUNT register *****************/
+#define SDIO_DCOUNT_DATACOUNT ((uint32_t)0x01FFFFFF) /*!<Data count value */
+
+/****************** Bit definition for SDIO_STA register ********************/
+#define SDIO_STA_CCRCFAIL ((uint32_t)0x00000001) /*!<Command response received (CRC check failed) */
+#define SDIO_STA_DCRCFAIL ((uint32_t)0x00000002) /*!<Data block sent/received (CRC check failed) */
+#define SDIO_STA_CTIMEOUT ((uint32_t)0x00000004) /*!<Command response timeout */
+#define SDIO_STA_DTIMEOUT ((uint32_t)0x00000008) /*!<Data timeout */
+#define SDIO_STA_TXUNDERR ((uint32_t)0x00000010) /*!<Transmit FIFO underrun error */
+#define SDIO_STA_RXOVERR ((uint32_t)0x00000020) /*!<Received FIFO overrun error */
+#define SDIO_STA_CMDREND ((uint32_t)0x00000040) /*!<Command response received (CRC check passed) */
+#define SDIO_STA_CMDSENT ((uint32_t)0x00000080) /*!<Command sent (no response required) */
+#define SDIO_STA_DATAEND ((uint32_t)0x00000100) /*!<Data end (data counter, SDIDCOUNT, is zero) */
+#define SDIO_STA_STBITERR ((uint32_t)0x00000200) /*!<Start bit not detected on all data signals in wide bus mode */
+#define SDIO_STA_DBCKEND ((uint32_t)0x00000400) /*!<Data block sent/received (CRC check passed) */
+#define SDIO_STA_CMDACT ((uint32_t)0x00000800) /*!<Command transfer in progress */
+#define SDIO_STA_TXACT ((uint32_t)0x00001000) /*!<Data transmit in progress */
+#define SDIO_STA_RXACT ((uint32_t)0x00002000) /*!<Data receive in progress */
+#define SDIO_STA_TXFIFOHE ((uint32_t)0x00004000) /*!<Transmit FIFO Half Empty: at least 8 words can be written into the FIFO */
+#define SDIO_STA_RXFIFOHF ((uint32_t)0x00008000) /*!<Receive FIFO Half Full: there are at least 8 words in the FIFO */
+#define SDIO_STA_TXFIFOF ((uint32_t)0x00010000) /*!<Transmit FIFO full */
+#define SDIO_STA_RXFIFOF ((uint32_t)0x00020000) /*!<Receive FIFO full */
+#define SDIO_STA_TXFIFOE ((uint32_t)0x00040000) /*!<Transmit FIFO empty */
+#define SDIO_STA_RXFIFOE ((uint32_t)0x00080000) /*!<Receive FIFO empty */
+#define SDIO_STA_TXDAVL ((uint32_t)0x00100000) /*!<Data available in transmit FIFO */
+#define SDIO_STA_RXDAVL ((uint32_t)0x00200000) /*!<Data available in receive FIFO */
+#define SDIO_STA_SDIOIT ((uint32_t)0x00400000) /*!<SDIO interrupt received */
+#define SDIO_STA_CEATAEND ((uint32_t)0x00800000) /*!<CE-ATA command completion signal received for CMD61 */
+
+/******************* Bit definition for SDIO_ICR register *******************/
+#define SDIO_ICR_CCRCFAILC ((uint32_t)0x00000001) /*!<CCRCFAIL flag clear bit */
+#define SDIO_ICR_DCRCFAILC ((uint32_t)0x00000002) /*!<DCRCFAIL flag clear bit */
+#define SDIO_ICR_CTIMEOUTC ((uint32_t)0x00000004) /*!<CTIMEOUT flag clear bit */
+#define SDIO_ICR_DTIMEOUTC ((uint32_t)0x00000008) /*!<DTIMEOUT flag clear bit */
+#define SDIO_ICR_TXUNDERRC ((uint32_t)0x00000010) /*!<TXUNDERR flag clear bit */
+#define SDIO_ICR_RXOVERRC ((uint32_t)0x00000020) /*!<RXOVERR flag clear bit */
+#define SDIO_ICR_CMDRENDC ((uint32_t)0x00000040) /*!<CMDREND flag clear bit */
+#define SDIO_ICR_CMDSENTC ((uint32_t)0x00000080) /*!<CMDSENT flag clear bit */
+#define SDIO_ICR_DATAENDC ((uint32_t)0x00000100) /*!<DATAEND flag clear bit */
+#define SDIO_ICR_STBITERRC ((uint32_t)0x00000200) /*!<STBITERR flag clear bit */
+#define SDIO_ICR_DBCKENDC ((uint32_t)0x00000400) /*!<DBCKEND flag clear bit */
+#define SDIO_ICR_SDIOITC ((uint32_t)0x00400000) /*!<SDIOIT flag clear bit */
+#define SDIO_ICR_CEATAENDC ((uint32_t)0x00800000) /*!<CEATAEND flag clear bit */
+
+/****************** Bit definition for SDIO_MASK register *******************/
+#define SDIO_MASK_CCRCFAILIE ((uint32_t)0x00000001) /*!<Command CRC Fail Interrupt Enable */
+#define SDIO_MASK_DCRCFAILIE ((uint32_t)0x00000002) /*!<Data CRC Fail Interrupt Enable */
+#define SDIO_MASK_CTIMEOUTIE ((uint32_t)0x00000004) /*!<Command TimeOut Interrupt Enable */
+#define SDIO_MASK_DTIMEOUTIE ((uint32_t)0x00000008) /*!<Data TimeOut Interrupt Enable */
+#define SDIO_MASK_TXUNDERRIE ((uint32_t)0x00000010) /*!<Tx FIFO UnderRun Error Interrupt Enable */
+#define SDIO_MASK_RXOVERRIE ((uint32_t)0x00000020) /*!<Rx FIFO OverRun Error Interrupt Enable */
+#define SDIO_MASK_CMDRENDIE ((uint32_t)0x00000040) /*!<Command Response Received Interrupt Enable */
+#define SDIO_MASK_CMDSENTIE ((uint32_t)0x00000080) /*!<Command Sent Interrupt Enable */
+#define SDIO_MASK_DATAENDIE ((uint32_t)0x00000100) /*!<Data End Interrupt Enable */
+#define SDIO_MASK_STBITERRIE ((uint32_t)0x00000200) /*!<Start Bit Error Interrupt Enable */
+#define SDIO_MASK_DBCKENDIE ((uint32_t)0x00000400) /*!<Data Block End Interrupt Enable */
+#define SDIO_MASK_CMDACTIE ((uint32_t)0x00000800) /*!<CCommand Acting Interrupt Enable */
+#define SDIO_MASK_TXACTIE ((uint32_t)0x00001000) /*!<Data Transmit Acting Interrupt Enable */
+#define SDIO_MASK_RXACTIE ((uint32_t)0x00002000) /*!<Data receive acting interrupt enabled */
+#define SDIO_MASK_TXFIFOHEIE ((uint32_t)0x00004000) /*!<Tx FIFO Half Empty interrupt Enable */
+#define SDIO_MASK_RXFIFOHFIE ((uint32_t)0x00008000) /*!<Rx FIFO Half Full interrupt Enable */
+#define SDIO_MASK_TXFIFOFIE ((uint32_t)0x00010000) /*!<Tx FIFO Full interrupt Enable */
+#define SDIO_MASK_RXFIFOFIE ((uint32_t)0x00020000) /*!<Rx FIFO Full interrupt Enable */
+#define SDIO_MASK_TXFIFOEIE ((uint32_t)0x00040000) /*!<Tx FIFO Empty interrupt Enable */
+#define SDIO_MASK_RXFIFOEIE ((uint32_t)0x00080000) /*!<Rx FIFO Empty interrupt Enable */
+#define SDIO_MASK_TXDAVLIE ((uint32_t)0x00100000) /*!<Data available in Tx FIFO interrupt Enable */
+#define SDIO_MASK_RXDAVLIE ((uint32_t)0x00200000) /*!<Data available in Rx FIFO interrupt Enable */
+#define SDIO_MASK_SDIOITIE ((uint32_t)0x00400000) /*!<SDIO Mode Interrupt Received interrupt Enable */
+#define SDIO_MASK_CEATAENDIE ((uint32_t)0x00800000) /*!<CE-ATA command completion signal received Interrupt Enable */
+
+/***************** Bit definition for SDIO_FIFOCNT register *****************/
+#define SDIO_FIFOCNT_FIFOCOUNT ((uint32_t)0x00FFFFFF) /*!<Remaining number of words to be written to or read from the FIFO */
+
+/****************** Bit definition for SDIO_FIFO register *******************/
+#define SDIO_FIFO_FIFODATA ((uint32_t)0xFFFFFFFF) /*!<Receive and transmit FIFO data */
+
+/******************************************************************************/
+/* */
+/* Serial Peripheral Interface */
+/* */
+/******************************************************************************/
+/******************* Bit definition for SPI_CR1 register ********************/
+#define SPI_CR1_CPHA ((uint32_t)0x00000001) /*!<Clock Phase */
+#define SPI_CR1_CPOL ((uint32_t)0x00000002) /*!<Clock Polarity */
+#define SPI_CR1_MSTR ((uint32_t)0x00000004) /*!<Master Selection */
+
+#define SPI_CR1_BR ((uint32_t)0x00000038) /*!<BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define SPI_CR1_BR_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define SPI_CR1_BR_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+
+#define SPI_CR1_SPE ((uint32_t)0x00000040) /*!<SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint32_t)0x00000080) /*!<Frame Format */
+#define SPI_CR1_SSI ((uint32_t)0x00000100) /*!<Internal slave select */
+#define SPI_CR1_SSM ((uint32_t)0x00000200) /*!<Software slave management */
+#define SPI_CR1_RXONLY ((uint32_t)0x00000400) /*!<Receive only */
+#define SPI_CR1_DFF ((uint32_t)0x00000800) /*!<Data Frame Format */
+#define SPI_CR1_CRCNEXT ((uint32_t)0x00001000) /*!<Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint32_t)0x00002000) /*!<Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint32_t)0x00004000) /*!<Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint32_t)0x00008000) /*!<Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register ********************/
+#define SPI_CR2_RXDMAEN ((uint32_t)0x00000001) /*!<Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint32_t)0x00000002) /*!<Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint32_t)0x00000004) /*!<SS Output Enable */
+#define SPI_CR2_FRF ((uint32_t)0x00000010) /*!<Frame Format */
+#define SPI_CR2_ERRIE ((uint32_t)0x00000020) /*!<Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint32_t)0x00000040) /*!<RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint32_t)0x00000080) /*!<Tx buffer Empty Interrupt Enable */
+
+/******************** Bit definition for SPI_SR register ********************/
+#define SPI_SR_RXNE ((uint32_t)0x00000001) /*!<Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint32_t)0x00000002) /*!<Transmit buffer Empty */
+#define SPI_SR_CHSIDE ((uint32_t)0x00000004) /*!<Channel side */
+#define SPI_SR_UDR ((uint32_t)0x00000008) /*!<Underrun flag */
+#define SPI_SR_CRCERR ((uint32_t)0x00000010) /*!<CRC Error flag */
+#define SPI_SR_MODF ((uint32_t)0x00000020) /*!<Mode fault */
+#define SPI_SR_OVR ((uint32_t)0x00000040) /*!<Overrun flag */
+#define SPI_SR_BSY ((uint32_t)0x00000080) /*!<Busy flag */
+#define SPI_SR_FRE ((uint32_t)0x00000100) /*!<Frame format error flag */
+
+/******************** Bit definition for SPI_DR register ********************/
+#define SPI_DR_DR ((uint32_t)0x0000FFFF) /*!<Data Register */
+
+/******************* Bit definition for SPI_CRCPR register ******************/
+#define SPI_CRCPR_CRCPOLY ((uint32_t)0x0000FFFF) /*!<CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register ******************/
+#define SPI_RXCRCR_RXCRC ((uint32_t)0x0000FFFF) /*!<Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register ******************/
+#define SPI_TXCRCR_TXCRC ((uint32_t)0x0000FFFF) /*!<Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register *****************/
+#define SPI_I2SCFGR_CHLEN ((uint32_t)0x00000001) /*!<Channel length (number of bits per audio channel) */
+
+#define SPI_I2SCFGR_DATLEN ((uint32_t)0x00000006) /*!<DATLEN[1:0] bits (Data length to be transferred) */
+#define SPI_I2SCFGR_DATLEN_0 ((uint32_t)0x00000002) /*!<Bit 0 */
+#define SPI_I2SCFGR_DATLEN_1 ((uint32_t)0x00000004) /*!<Bit 1 */
+
+#define SPI_I2SCFGR_CKPOL ((uint32_t)0x00000008) /*!<steady state clock polarity */
+
+#define SPI_I2SCFGR_I2SSTD ((uint32_t)0x00000030) /*!<I2SSTD[1:0] bits (I2S standard selection) */
+#define SPI_I2SCFGR_I2SSTD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SSTD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define SPI_I2SCFGR_PCMSYNC ((uint32_t)0x00000080) /*!<PCM frame synchronization */
+
+#define SPI_I2SCFGR_I2SCFG ((uint32_t)0x00000300) /*!<I2SCFG[1:0] bits (I2S configuration mode) */
+#define SPI_I2SCFGR_I2SCFG_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SCFG_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define SPI_I2SCFGR_I2SE ((uint32_t)0x00000400) /*!<I2S Enable */
+#define SPI_I2SCFGR_I2SMOD ((uint32_t)0x00000800) /*!<I2S mode selection */
+
+/****************** Bit definition for SPI_I2SPR register *******************/
+#define SPI_I2SPR_I2SDIV ((uint32_t)0x000000FF) /*!<I2S Linear prescaler */
+#define SPI_I2SPR_ODD ((uint32_t)0x00000100) /*!<Odd factor for the prescaler */
+#define SPI_I2SPR_MCKOE ((uint32_t)0x00000200) /*!<Master Clock Output Enable */
+
+/******************************************************************************/
+/* */
+/* SYSCFG */
+/* */
+/******************************************************************************/
+/****************** Bit definition for SYSCFG_MEMRMP register ***************/
+#define SYSCFG_MEMRMP_MEM_MODE ((uint32_t)0x00000007) /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_MEMRMP_MEM_MODE_0 ((uint32_t)0x00000001)
+#define SYSCFG_MEMRMP_MEM_MODE_1 ((uint32_t)0x00000002)
+#define SYSCFG_MEMRMP_MEM_MODE_2 ((uint32_t)0x00000004)
+
+/****************** Bit definition for SYSCFG_PMC register ******************/
+#define SYSCFG_PMC_ADC1DC2 ((uint32_t)0x00010000) /*!< Refer to AN4073 on how to use this bit */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register ***************/
+#define SYSCFG_EXTICR1_EXTI0 ((uint32_t)0x000F) /*!<EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 ((uint32_t)0x00F0) /*!<EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 ((uint32_t)0x0F00) /*!<EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 ((uint32_t)0xF000) /*!<EXTI 3 configuration */
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA ((uint32_t)0x0000) /*!<PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB ((uint32_t)0x0001) /*!<PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC ((uint32_t)0x0002) /*!<PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD ((uint32_t)0x0003) /*!<PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PE ((uint32_t)0x0004) /*!<PE[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PH ((uint32_t)0x0007) /*!<PH[0] pin */
+
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA ((uint32_t)0x0000) /*!<PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB ((uint32_t)0x0010) /*!<PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC ((uint32_t)0x0020) /*!<PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD ((uint32_t)0x0030) /*!<PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PE ((uint32_t)0x0040) /*!<PE[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PH ((uint32_t)0x0070) /*!<PH[1] pin */
+
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA ((uint32_t)0x0000) /*!<PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB ((uint32_t)0x0100) /*!<PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC ((uint32_t)0x0200) /*!<PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD ((uint32_t)0x0300) /*!<PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PE ((uint32_t)0x0400) /*!<PE[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PH ((uint32_t)0x0700) /*!<PH[2] pin */
+
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA ((uint32_t)0x0000) /*!<PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB ((uint32_t)0x1000) /*!<PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC ((uint32_t)0x2000) /*!<PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD ((uint32_t)0x3000) /*!<PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PE ((uint32_t)0x4000) /*!<PE[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PH ((uint32_t)0x7000) /*!<PH[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register ***************/
+#define SYSCFG_EXTICR2_EXTI4 ((uint32_t)0x000F) /*!<EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 ((uint32_t)0x00F0) /*!<EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 ((uint32_t)0x0F00) /*!<EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 ((uint32_t)0xF000) /*!<EXTI 7 configuration */
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA ((uint32_t)0x0000) /*!<PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB ((uint32_t)0x0001) /*!<PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC ((uint32_t)0x0002) /*!<PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD ((uint32_t)0x0003) /*!<PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PE ((uint32_t)0x0004) /*!<PE[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PH ((uint32_t)0x0007) /*!<PH[4] pin */
+
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA ((uint32_t)0x0000) /*!<PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB ((uint32_t)0x0010) /*!<PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC ((uint32_t)0x0020) /*!<PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD ((uint32_t)0x0030) /*!<PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PE ((uint32_t)0x0040) /*!<PE[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PH ((uint32_t)0x0070) /*!<PH[5] pin */
+
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA ((uint32_t)0x0000) /*!<PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB ((uint32_t)0x0100) /*!<PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC ((uint32_t)0x0200) /*!<PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD ((uint32_t)0x0300) /*!<PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PE ((uint32_t)0x0400) /*!<PE[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PH ((uint32_t)0x0700) /*!<PH[6] pin */
+
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA ((uint32_t)0x0000) /*!<PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB ((uint32_t)0x1000) /*!<PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC ((uint32_t)0x2000) /*!<PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD ((uint32_t)0x3000) /*!<PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PE ((uint32_t)0x4000) /*!<PE[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PH ((uint32_t)0x7000) /*!<PH[7] pin */
+
+
+/***************** Bit definition for SYSCFG_EXTICR3 register ***************/
+#define SYSCFG_EXTICR3_EXTI8 ((uint32_t)0x000F) /*!<EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 ((uint32_t)0x00F0) /*!<EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 ((uint32_t)0x0F00) /*!<EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 ((uint32_t)0xF000) /*!<EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA ((uint32_t)0x0000) /*!<PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB ((uint32_t)0x0001) /*!<PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC ((uint32_t)0x0002) /*!<PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD ((uint32_t)0x0003) /*!<PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PE ((uint32_t)0x0004) /*!<PE[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PH ((uint32_t)0x0007) /*!<PH[8] pin */
+
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA ((uint32_t)0x0000) /*!<PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB ((uint32_t)0x0010) /*!<PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC ((uint32_t)0x0020) /*!<PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD ((uint32_t)0x0030) /*!<PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PE ((uint32_t)0x0040) /*!<PE[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PH ((uint32_t)0x0070) /*!<PH[9] pin */
+
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA ((uint32_t)0x0000) /*!<PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB ((uint32_t)0x0100) /*!<PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC ((uint32_t)0x0200) /*!<PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD ((uint32_t)0x0300) /*!<PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PE ((uint32_t)0x0400) /*!<PE[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PH ((uint32_t)0x0700) /*!<PH[10] pin */
+
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA ((uint32_t)0x0000) /*!<PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB ((uint32_t)0x1000) /*!<PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC ((uint32_t)0x2000) /*!<PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD ((uint32_t)0x3000) /*!<PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PE ((uint32_t)0x4000) /*!<PE[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PH ((uint32_t)0x7000) /*!<PH[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register ***************/
+#define SYSCFG_EXTICR4_EXTI12 ((uint32_t)0x000F) /*!<EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 ((uint32_t)0x00F0) /*!<EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 ((uint32_t)0x0F00) /*!<EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 ((uint32_t)0xF000) /*!<EXTI 15 configuration */
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA ((uint32_t)0x0000) /*!<PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB ((uint32_t)0x0001) /*!<PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC ((uint32_t)0x0002) /*!<PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD ((uint32_t)0x0003) /*!<PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PE ((uint32_t)0x0004) /*!<PE[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PH ((uint32_t)0x0007) /*!<PH[12] pin */
+
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA ((uint32_t)0x0000) /*!<PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB ((uint32_t)0x0010) /*!<PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC ((uint32_t)0x0020) /*!<PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD ((uint32_t)0x0030) /*!<PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PE ((uint32_t)0x0040) /*!<PE[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PH ((uint32_t)0x0070) /*!<PH[13] pin */
+
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA ((uint32_t)0x0000) /*!<PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB ((uint32_t)0x0100) /*!<PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC ((uint32_t)0x0200) /*!<PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD ((uint32_t)0x0300) /*!<PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PE ((uint32_t)0x0400) /*!<PE[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PH ((uint32_t)0x0700) /*!<PH[14] pin */
+
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA ((uint32_t)0x0000) /*!<PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB ((uint32_t)0x1000) /*!<PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC ((uint32_t)0x2000) /*!<PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD ((uint32_t)0x3000) /*!<PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PE ((uint32_t)0x4000) /*!<PE[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PH ((uint32_t)0x7000) /*!<PH[15] pin */
+
+/****************** Bit definition for SYSCFG_CMPCR register ****************/
+#define SYSCFG_CMPCR_CMP_PD ((uint32_t)0x00000001) /*!<Compensation cell ready flag */
+#define SYSCFG_CMPCR_READY ((uint32_t)0x00000100) /*!<Compensation cell power-down */
+
+/******************************************************************************/
+/* */
+/* TIM */
+/* */
+/******************************************************************************/
+/******************* Bit definition for TIM_CR1 register ********************/
+#define TIM_CR1_CEN ((uint32_t)0x0001) /*!<Counter enable */
+#define TIM_CR1_UDIS ((uint32_t)0x0002) /*!<Update disable */
+#define TIM_CR1_URS ((uint32_t)0x0004) /*!<Update request source */
+#define TIM_CR1_OPM ((uint32_t)0x0008) /*!<One pulse mode */
+#define TIM_CR1_DIR ((uint32_t)0x0010) /*!<Direction */
+
+#define TIM_CR1_CMS ((uint32_t)0x0060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint32_t)0x0020) /*!<Bit 0 */
+#define TIM_CR1_CMS_1 ((uint32_t)0x0040) /*!<Bit 1 */
+
+#define TIM_CR1_ARPE ((uint32_t)0x0080) /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint32_t)0x0300) /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint32_t)0x0100) /*!<Bit 0 */
+#define TIM_CR1_CKD_1 ((uint32_t)0x0200) /*!<Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register ********************/
+#define TIM_CR2_CCPC ((uint32_t)0x0001) /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS ((uint32_t)0x0004) /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS ((uint32_t)0x0008) /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint32_t)0x0070) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint32_t)0x0010) /*!<Bit 0 */
+#define TIM_CR2_MMS_1 ((uint32_t)0x0020) /*!<Bit 1 */
+#define TIM_CR2_MMS_2 ((uint32_t)0x0040) /*!<Bit 2 */
+
+#define TIM_CR2_TI1S ((uint32_t)0x0080) /*!<TI1 Selection */
+#define TIM_CR2_OIS1 ((uint32_t)0x0100) /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N ((uint32_t)0x0200) /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 ((uint32_t)0x0400) /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N ((uint32_t)0x0800) /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 ((uint32_t)0x1000) /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N ((uint32_t)0x2000) /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 ((uint32_t)0x4000) /*!<Output Idle state 4 (OC4 output) */
+
+/******************* Bit definition for TIM_SMCR register *******************/
+#define TIM_SMCR_SMS ((uint32_t)0x0007) /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint32_t)0x0004) /*!<Bit 2 */
+
+#define TIM_SMCR_TS ((uint32_t)0x0070) /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint32_t)0x0010) /*!<Bit 0 */
+#define TIM_SMCR_TS_1 ((uint32_t)0x0020) /*!<Bit 1 */
+#define TIM_SMCR_TS_2 ((uint32_t)0x0040) /*!<Bit 2 */
+
+#define TIM_SMCR_MSM ((uint32_t)0x0080) /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint32_t)0x0F00) /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint32_t)0x0100) /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint32_t)0x0200) /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint32_t)0x0400) /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint32_t)0x0800) /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint32_t)0x3000) /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint32_t)0x1000) /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint32_t)0x2000) /*!<Bit 1 */
+
+#define TIM_SMCR_ECE ((uint32_t)0x4000) /*!<External clock enable */
+#define TIM_SMCR_ETP ((uint32_t)0x8000) /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register *******************/
+#define TIM_DIER_UIE ((uint32_t)0x0001) /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint32_t)0x0002) /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint32_t)0x0004) /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint32_t)0x0008) /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint32_t)0x0010) /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE ((uint32_t)0x0020) /*!<COM interrupt enable */
+#define TIM_DIER_TIE ((uint32_t)0x0040) /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE ((uint32_t)0x0080) /*!<Break interrupt enable */
+#define TIM_DIER_UDE ((uint32_t)0x0100) /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint32_t)0x0200) /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint32_t)0x0400) /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint32_t)0x0800) /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint32_t)0x1000) /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint32_t)0x2000) /*!<COM DMA request enable */
+#define TIM_DIER_TDE ((uint32_t)0x4000) /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register ********************/
+#define TIM_SR_UIF ((uint32_t)0x0001) /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint32_t)0x0002) /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint32_t)0x0004) /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint32_t)0x0008) /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint32_t)0x0010) /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF ((uint32_t)0x0020) /*!<COM interrupt Flag */
+#define TIM_SR_TIF ((uint32_t)0x0040) /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF ((uint32_t)0x0080) /*!<Break interrupt Flag */
+#define TIM_SR_CC1OF ((uint32_t)0x0200) /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint32_t)0x0400) /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint32_t)0x0800) /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint32_t)0x1000) /*!<Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register ********************/
+#define TIM_EGR_UG ((uint32_t)0x01) /*!<Update Generation */
+#define TIM_EGR_CC1G ((uint32_t)0x02) /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint32_t)0x04) /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint32_t)0x08) /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint32_t)0x10) /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG ((uint32_t)0x20) /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG ((uint32_t)0x40) /*!<Trigger Generation */
+#define TIM_EGR_BG ((uint32_t)0x80) /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register *******************/
+#define TIM_CCMR1_CC1S ((uint32_t)0x0003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint32_t)0x0002) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint32_t)0x0004) /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint32_t)0x0008) /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint32_t)0x0070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint32_t)0x0010) /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint32_t)0x0020) /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint32_t)0x0040) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC1CE ((uint32_t)0x0080) /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint32_t)0x0300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint32_t)0x0100) /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint32_t)0x0200) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint32_t)0x0400) /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint32_t)0x0800) /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint32_t)0x7000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint32_t)0x1000) /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint32_t)0x2000) /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint32_t)0x4000) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC2CE ((uint32_t)0x8000) /*!<Output Compare 2 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint32_t)0x000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint32_t)0x0004) /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint32_t)0x0008) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint32_t)0x00F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint32_t)0x0010) /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint32_t)0x0020) /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint32_t)0x0040) /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint32_t)0x0080) /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint32_t)0x0C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint32_t)0x0400) /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint32_t)0x0800) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint32_t)0xF000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint32_t)0x1000) /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint32_t)0x2000) /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint32_t)0x4000) /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint32_t)0x8000) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register *******************/
+#define TIM_CCMR2_CC3S ((uint32_t)0x0003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint32_t)0x0002) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint32_t)0x0004) /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint32_t)0x0008) /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint32_t)0x0070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint32_t)0x0010) /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint32_t)0x0020) /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint32_t)0x0040) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC3CE ((uint32_t)0x0080) /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint32_t)0x0300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint32_t)0x0100) /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint32_t)0x0200) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint32_t)0x0400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint32_t)0x0800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint32_t)0x7000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint32_t)0x1000) /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint32_t)0x2000) /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint32_t)0x4000) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC4CE ((uint32_t)0x8000) /*!<Output Compare 4 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint32_t)0x000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint32_t)0x0004) /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint32_t)0x0008) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint32_t)0x00F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint32_t)0x0010) /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint32_t)0x0020) /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint32_t)0x0040) /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint32_t)0x0080) /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint32_t)0x0C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint32_t)0x0400) /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint32_t)0x0800) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint32_t)0xF000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint32_t)0x1000) /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint32_t)0x2000) /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint32_t)0x4000) /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint32_t)0x8000) /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register *******************/
+#define TIM_CCER_CC1E ((uint32_t)0x0001) /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint32_t)0x0002) /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE ((uint32_t)0x0004) /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP ((uint32_t)0x0008) /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint32_t)0x0010) /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint32_t)0x0020) /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE ((uint32_t)0x0040) /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP ((uint32_t)0x0080) /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint32_t)0x0100) /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint32_t)0x0200) /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE ((uint32_t)0x0400) /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP ((uint32_t)0x0800) /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint32_t)0x1000) /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint32_t)0x2000) /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint32_t)0x8000) /*!<Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register ********************/
+#define TIM_CNT_CNT ((uint32_t)0xFFFF) /*!<Counter Value */
+
+/******************* Bit definition for TIM_PSC register ********************/
+#define TIM_PSC_PSC ((uint32_t)0xFFFF) /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register ********************/
+#define TIM_ARR_ARR ((uint32_t)0xFFFF) /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register ********************/
+#define TIM_RCR_REP ((uint32_t)0xFF) /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register *******************/
+#define TIM_CCR1_CCR1 ((uint32_t)0xFFFF) /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register *******************/
+#define TIM_CCR2_CCR2 ((uint32_t)0xFFFF) /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register *******************/
+#define TIM_CCR3_CCR3 ((uint32_t)0xFFFF) /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register *******************/
+#define TIM_CCR4_CCR4 ((uint32_t)0xFFFF) /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_BDTR register *******************/
+#define TIM_BDTR_DTG ((uint32_t)0x00FF) /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 ((uint32_t)0x0040) /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 ((uint32_t)0x0080) /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK ((uint32_t)0x0300) /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 ((uint32_t)0x0100) /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 ((uint32_t)0x0200) /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI ((uint32_t)0x0400) /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR ((uint32_t)0x0800) /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE ((uint32_t)0x1000) /*!<Break enable */
+#define TIM_BDTR_BKP ((uint32_t)0x2000) /*!<Break Polarity */
+#define TIM_BDTR_AOE ((uint32_t)0x4000) /*!<Automatic Output enable */
+#define TIM_BDTR_MOE ((uint32_t)0x8000) /*!<Main Output enable */
+
+/******************* Bit definition for TIM_DCR register ********************/
+#define TIM_DCR_DBA ((uint32_t)0x001F) /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define TIM_DCR_DBA_1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define TIM_DCR_DBA_2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define TIM_DCR_DBA_3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define TIM_DCR_DBA_4 ((uint32_t)0x0010) /*!<Bit 4 */
+
+#define TIM_DCR_DBL ((uint32_t)0x1F00) /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint32_t)0x0100) /*!<Bit 0 */
+#define TIM_DCR_DBL_1 ((uint32_t)0x0200) /*!<Bit 1 */
+#define TIM_DCR_DBL_2 ((uint32_t)0x0400) /*!<Bit 2 */
+#define TIM_DCR_DBL_3 ((uint32_t)0x0800) /*!<Bit 3 */
+#define TIM_DCR_DBL_4 ((uint32_t)0x1000) /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register *******************/
+#define TIM_DMAR_DMAB ((uint32_t)0xFFFF) /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM_OR register *********************/
+#define TIM_OR_TI4_RMP ((uint32_t)0x00C0) /*!<TI4_RMP[1:0] bits (TIM5 Input 4 remap) */
+#define TIM_OR_TI4_RMP_0 ((uint32_t)0x0040) /*!<Bit 0 */
+#define TIM_OR_TI4_RMP_1 ((uint32_t)0x0080) /*!<Bit 1 */
+#define TIM_OR_ITR1_RMP ((uint32_t)0x0C00) /*!<ITR1_RMP[1:0] bits (TIM2 Internal trigger 1 remap) */
+#define TIM_OR_ITR1_RMP_0 ((uint32_t)0x0400) /*!<Bit 0 */
+#define TIM_OR_ITR1_RMP_1 ((uint32_t)0x0800) /*!<Bit 1 */
+
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter */
+/* */
+/******************************************************************************/
+/******************* Bit definition for USART_SR register *******************/
+#define USART_SR_PE ((uint32_t)0x0001) /*!<Parity Error */
+#define USART_SR_FE ((uint32_t)0x0002) /*!<Framing Error */
+#define USART_SR_NE ((uint32_t)0x0004) /*!<Noise Error Flag */
+#define USART_SR_ORE ((uint32_t)0x0008) /*!<OverRun Error */
+#define USART_SR_IDLE ((uint32_t)0x0010) /*!<IDLE line detected */
+#define USART_SR_RXNE ((uint32_t)0x0020) /*!<Read Data Register Not Empty */
+#define USART_SR_TC ((uint32_t)0x0040) /*!<Transmission Complete */
+#define USART_SR_TXE ((uint32_t)0x0080) /*!<Transmit Data Register Empty */
+#define USART_SR_LBD ((uint32_t)0x0100) /*!<LIN Break Detection Flag */
+#define USART_SR_CTS ((uint32_t)0x0200) /*!<CTS Flag */
+
+/******************* Bit definition for USART_DR register *******************/
+#define USART_DR_DR ((uint32_t)0x01FF) /*!<Data value */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_Fraction ((uint32_t)0x000F) /*!<Fraction of USARTDIV */
+#define USART_BRR_DIV_Mantissa ((uint32_t)0xFFF0) /*!<Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_SBK ((uint32_t)0x0001) /*!<Send Break */
+#define USART_CR1_RWU ((uint32_t)0x0002) /*!<Receiver wakeup */
+#define USART_CR1_RE ((uint32_t)0x0004) /*!<Receiver Enable */
+#define USART_CR1_TE ((uint32_t)0x0008) /*!<Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint32_t)0x0010) /*!<IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint32_t)0x0020) /*!<RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint32_t)0x0040) /*!<Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint32_t)0x0080) /*!<PE Interrupt Enable */
+#define USART_CR1_PEIE ((uint32_t)0x0100) /*!<PE Interrupt Enable */
+#define USART_CR1_PS ((uint32_t)0x0200) /*!<Parity Selection */
+#define USART_CR1_PCE ((uint32_t)0x0400) /*!<Parity Control Enable */
+#define USART_CR1_WAKE ((uint32_t)0x0800) /*!<Wakeup method */
+#define USART_CR1_M ((uint32_t)0x1000) /*!<Word length */
+#define USART_CR1_UE ((uint32_t)0x2000) /*!<USART Enable */
+#define USART_CR1_OVER8 ((uint32_t)0x8000) /*!<USART Oversampling by 8 enable */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADD ((uint32_t)0x000F) /*!<Address of the USART node */
+#define USART_CR2_LBDL ((uint32_t)0x0020) /*!<LIN Break Detection Length */
+#define USART_CR2_LBDIE ((uint32_t)0x0040) /*!<LIN Break Detection Interrupt Enable */
+#define USART_CR2_LBCL ((uint32_t)0x0100) /*!<Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint32_t)0x0200) /*!<Clock Phase */
+#define USART_CR2_CPOL ((uint32_t)0x0400) /*!<Clock Polarity */
+#define USART_CR2_CLKEN ((uint32_t)0x0800) /*!<Clock Enable */
+
+#define USART_CR2_STOP ((uint32_t)0x3000) /*!<STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint32_t)0x1000) /*!<Bit 0 */
+#define USART_CR2_STOP_1 ((uint32_t)0x2000) /*!<Bit 1 */
+
+#define USART_CR2_LINEN ((uint32_t)0x4000) /*!<LIN mode enable */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint32_t)0x0001) /*!<Error Interrupt Enable */
+#define USART_CR3_IREN ((uint32_t)0x0002) /*!<IrDA mode Enable */
+#define USART_CR3_IRLP ((uint32_t)0x0004) /*!<IrDA Low-Power */
+#define USART_CR3_HDSEL ((uint32_t)0x0008) /*!<Half-Duplex Selection */
+#define USART_CR3_NACK ((uint32_t)0x0010) /*!<Smartcard NACK enable */
+#define USART_CR3_SCEN ((uint32_t)0x0020) /*!<Smartcard mode enable */
+#define USART_CR3_DMAR ((uint32_t)0x0040) /*!<DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint32_t)0x0080) /*!<DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint32_t)0x0100) /*!<RTS Enable */
+#define USART_CR3_CTSE ((uint32_t)0x0200) /*!<CTS Enable */
+#define USART_CR3_CTSIE ((uint32_t)0x0400) /*!<CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint32_t)0x0800) /*!<USART One bit method enable */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint32_t)0x00FF) /*!<PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_PSC_0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define USART_GTPR_PSC_1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define USART_GTPR_PSC_2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define USART_GTPR_PSC_3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define USART_GTPR_PSC_4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define USART_GTPR_PSC_5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define USART_GTPR_PSC_6 ((uint32_t)0x0040) /*!<Bit 6 */
+#define USART_GTPR_PSC_7 ((uint32_t)0x0080) /*!<Bit 7 */
+
+#define USART_GTPR_GT ((uint32_t)0xFF00) /*!<Guard time value */
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint32_t)0x7F) /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint32_t)0x01) /*!<Bit 0 */
+#define WWDG_CR_T1 ((uint32_t)0x02) /*!<Bit 1 */
+#define WWDG_CR_T2 ((uint32_t)0x04) /*!<Bit 2 */
+#define WWDG_CR_T3 ((uint32_t)0x08) /*!<Bit 3 */
+#define WWDG_CR_T4 ((uint32_t)0x10) /*!<Bit 4 */
+#define WWDG_CR_T5 ((uint32_t)0x20) /*!<Bit 5 */
+#define WWDG_CR_T6 ((uint32_t)0x40) /*!<Bit 6 */
+
+#define WWDG_CR_WDGA ((uint32_t)0x80) /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint32_t)0x007F) /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define WWDG_CFR_W1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define WWDG_CFR_W2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define WWDG_CFR_W3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define WWDG_CFR_W4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define WWDG_CFR_W5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define WWDG_CFR_W6 ((uint32_t)0x0040) /*!<Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint32_t)0x0180) /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint32_t)0x0080) /*!<Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint32_t)0x0100) /*!<Bit 1 */
+
+#define WWDG_CFR_EWI ((uint32_t)0x0200) /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint32_t)0x01) /*!<Early Wakeup Interrupt Flag */
+
+
+/******************************************************************************/
+/* */
+/* DBG */
+/* */
+/******************************************************************************/
+/******************** Bit definition for DBGMCU_IDCODE register *************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF)
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000)
+
+/******************** Bit definition for DBGMCU_CR register *****************/
+#define DBGMCU_CR_DBG_SLEEP ((uint32_t)0x00000001)
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002)
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004)
+#define DBGMCU_CR_TRACE_IOEN ((uint32_t)0x00000020)
+
+#define DBGMCU_CR_TRACE_MODE ((uint32_t)0x000000C0)
+#define DBGMCU_CR_TRACE_MODE_0 ((uint32_t)0x00000040)/*!<Bit 0 */
+#define DBGMCU_CR_TRACE_MODE_1 ((uint32_t)0x00000080)/*!<Bit 1 */
+
+/******************** Bit definition for DBGMCU_APB1_FZ register ************/
+#define DBGMCU_APB1_FZ_DBG_TIM2_STOP ((uint32_t)0x00000001)
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002)
+#define DBGMCU_APB1_FZ_DBG_TIM4_STOP ((uint32_t)0x00000004)
+#define DBGMCU_APB1_FZ_DBG_TIM5_STOP ((uint32_t)0x00000008)
+#define DBGMCU_APB1_FZ_DBG_TIM6_STOP ((uint32_t)0x00000010)
+#define DBGMCU_APB1_FZ_DBG_TIM7_STOP ((uint32_t)0x00000020)
+#define DBGMCU_APB1_FZ_DBG_TIM12_STOP ((uint32_t)0x00000040)
+#define DBGMCU_APB1_FZ_DBG_TIM13_STOP ((uint32_t)0x00000080)
+#define DBGMCU_APB1_FZ_DBG_TIM14_STOP ((uint32_t)0x00000100)
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400)
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800)
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000)
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000)
+#define DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00400000)
+#define DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT ((uint32_t)0x00800000)
+#define DBGMCU_APB1_FZ_DBG_CAN1_STOP ((uint32_t)0x02000000)
+#define DBGMCU_APB1_FZ_DBG_CAN2_STOP ((uint32_t)0x04000000)
+/* Old IWDGSTOP bit definition, maintained for legacy purpose */
+#define DBGMCU_APB1_FZ_DBG_IWDEG_STOP DBGMCU_APB1_FZ_DBG_IWDG_STOP
+
+/******************** Bit definition for DBGMCU_APB2_FZ register ************/
+#define DBGMCU_APB2_FZ_DBG_TIM1_STOP ((uint32_t)0x00000001)
+#define DBGMCU_APB2_FZ_DBG_TIM8_STOP ((uint32_t)0x00000002)
+#define DBGMCU_APB2_FZ_DBG_TIM9_STOP ((uint32_t)0x00010000)
+#define DBGMCU_APB2_FZ_DBG_TIM10_STOP ((uint32_t)0x00020000)
+#define DBGMCU_APB2_FZ_DBG_TIM11_STOP ((uint32_t)0x00040000)
+
+/******************************************************************************/
+/* */
+/* USB_OTG */
+/* */
+/******************************************************************************/
+/******************** Bit definition forUSB_OTG_GOTGCTL register ********************/
+#define USB_OTG_GOTGCTL_SRQSCS ((uint32_t)0x00000001) /*!< Session request success */
+#define USB_OTG_GOTGCTL_SRQ ((uint32_t)0x00000002) /*!< Session request */
+#define USB_OTG_GOTGCTL_HNGSCS ((uint32_t)0x00000100) /*!< Host negotiation success */
+#define USB_OTG_GOTGCTL_HNPRQ ((uint32_t)0x00000200) /*!< HNP request */
+#define USB_OTG_GOTGCTL_HSHNPEN ((uint32_t)0x00000400) /*!< Host set HNP enable */
+#define USB_OTG_GOTGCTL_DHNPEN ((uint32_t)0x00000800) /*!< Device HNP enabled */
+#define USB_OTG_GOTGCTL_CIDSTS ((uint32_t)0x00010000) /*!< Connector ID status */
+#define USB_OTG_GOTGCTL_DBCT ((uint32_t)0x00020000) /*!< Long/short debounce time */
+#define USB_OTG_GOTGCTL_ASVLD ((uint32_t)0x00040000) /*!< A-session valid */
+#define USB_OTG_GOTGCTL_BSVLD ((uint32_t)0x00080000) /*!< B-session valid */
+
+/******************** Bit definition forUSB_OTG_HCFG register ********************/
+
+#define USB_OTG_HCFG_FSLSPCS ((uint32_t)0x00000003) /*!< FS/LS PHY clock select */
+#define USB_OTG_HCFG_FSLSPCS_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define USB_OTG_HCFG_FSLSPCS_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define USB_OTG_HCFG_FSLSS ((uint32_t)0x00000004) /*!< FS- and LS-only support */
+
+/******************** Bit definition forUSB_OTG_DCFG register ********************/
+
+#define USB_OTG_DCFG_DSPD ((uint32_t)0x00000003) /*!< Device speed */
+#define USB_OTG_DCFG_DSPD_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define USB_OTG_DCFG_DSPD_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define USB_OTG_DCFG_NZLSOHSK ((uint32_t)0x00000004) /*!< Nonzero-length status OUT handshake */
+
+#define USB_OTG_DCFG_DAD ((uint32_t)0x000007F0) /*!< Device address */
+#define USB_OTG_DCFG_DAD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define USB_OTG_DCFG_DAD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define USB_OTG_DCFG_DAD_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define USB_OTG_DCFG_DAD_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+#define USB_OTG_DCFG_DAD_4 ((uint32_t)0x00000100) /*!<Bit 4 */
+#define USB_OTG_DCFG_DAD_5 ((uint32_t)0x00000200) /*!<Bit 5 */
+#define USB_OTG_DCFG_DAD_6 ((uint32_t)0x00000400) /*!<Bit 6 */
+
+#define USB_OTG_DCFG_PFIVL ((uint32_t)0x00001800) /*!< Periodic (micro)frame interval */
+#define USB_OTG_DCFG_PFIVL_0 ((uint32_t)0x00000800) /*!<Bit 0 */
+#define USB_OTG_DCFG_PFIVL_1 ((uint32_t)0x00001000) /*!<Bit 1 */
+
+#define USB_OTG_DCFG_PERSCHIVL ((uint32_t)0x03000000) /*!< Periodic scheduling interval */
+#define USB_OTG_DCFG_PERSCHIVL_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define USB_OTG_DCFG_PERSCHIVL_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+
+/******************** Bit definition forUSB_OTG_PCGCR register ********************/
+#define USB_OTG_PCGCR_STPPCLK ((uint32_t)0x00000001) /*!< Stop PHY clock */
+#define USB_OTG_PCGCR_GATEHCLK ((uint32_t)0x00000002) /*!< Gate HCLK */
+#define USB_OTG_PCGCR_PHYSUSP ((uint32_t)0x00000010) /*!< PHY suspended */
+
+/******************** Bit definition forUSB_OTG_GOTGINT register ********************/
+#define USB_OTG_GOTGINT_SEDET ((uint32_t)0x00000004) /*!< Session end detected */
+#define USB_OTG_GOTGINT_SRSSCHG ((uint32_t)0x00000100) /*!< Session request success status change */
+#define USB_OTG_GOTGINT_HNSSCHG ((uint32_t)0x00000200) /*!< Host negotiation success status change */
+#define USB_OTG_GOTGINT_HNGDET ((uint32_t)0x00020000) /*!< Host negotiation detected */
+#define USB_OTG_GOTGINT_ADTOCHG ((uint32_t)0x00040000) /*!< A-device timeout change */
+#define USB_OTG_GOTGINT_DBCDNE ((uint32_t)0x00080000) /*!< Debounce done */
+
+/******************** Bit definition forUSB_OTG_DCTL register ********************/
+#define USB_OTG_DCTL_RWUSIG ((uint32_t)0x00000001) /*!< Remote wakeup signaling */
+#define USB_OTG_DCTL_SDIS ((uint32_t)0x00000002) /*!< Soft disconnect */
+#define USB_OTG_DCTL_GINSTS ((uint32_t)0x00000004) /*!< Global IN NAK status */
+#define USB_OTG_DCTL_GONSTS ((uint32_t)0x00000008) /*!< Global OUT NAK status */
+
+#define USB_OTG_DCTL_TCTL ((uint32_t)0x00000070) /*!< Test control */
+#define USB_OTG_DCTL_TCTL_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define USB_OTG_DCTL_TCTL_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define USB_OTG_DCTL_TCTL_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define USB_OTG_DCTL_SGINAK ((uint32_t)0x00000080) /*!< Set global IN NAK */
+#define USB_OTG_DCTL_CGINAK ((uint32_t)0x00000100) /*!< Clear global IN NAK */
+#define USB_OTG_DCTL_SGONAK ((uint32_t)0x00000200) /*!< Set global OUT NAK */
+#define USB_OTG_DCTL_CGONAK ((uint32_t)0x00000400) /*!< Clear global OUT NAK */
+#define USB_OTG_DCTL_POPRGDNE ((uint32_t)0x00000800) /*!< Power-on programming done */
+
+/******************** Bit definition forUSB_OTG_HFIR register ********************/
+#define USB_OTG_HFIR_FRIVL ((uint32_t)0x0000FFFF) /*!< Frame interval */
+
+/******************** Bit definition forUSB_OTG_HFNUM register ********************/
+#define USB_OTG_HFNUM_FRNUM ((uint32_t)0x0000FFFF) /*!< Frame number */
+#define USB_OTG_HFNUM_FTREM ((uint32_t)0xFFFF0000) /*!< Frame time remaining */
+
+/******************** Bit definition forUSB_OTG_DSTS register ********************/
+#define USB_OTG_DSTS_SUSPSTS ((uint32_t)0x00000001) /*!< Suspend status */
+
+#define USB_OTG_DSTS_ENUMSPD ((uint32_t)0x00000006) /*!< Enumerated speed */
+#define USB_OTG_DSTS_ENUMSPD_0 ((uint32_t)0x00000002) /*!<Bit 0 */
+#define USB_OTG_DSTS_ENUMSPD_1 ((uint32_t)0x00000004) /*!<Bit 1 */
+#define USB_OTG_DSTS_EERR ((uint32_t)0x00000008) /*!< Erratic error */
+#define USB_OTG_DSTS_FNSOF ((uint32_t)0x003FFF00) /*!< Frame number of the received SOF */
+
+/******************** Bit definition forUSB_OTG_GAHBCFG register ********************/
+#define USB_OTG_GAHBCFG_GINT ((uint32_t)0x00000001) /*!< Global interrupt mask */
+
+#define USB_OTG_GAHBCFG_HBSTLEN ((uint32_t)0x0000001E) /*!< Burst length/type */
+#define USB_OTG_GAHBCFG_HBSTLEN_0 ((uint32_t)0x00000002) /*!<Bit 0 */
+#define USB_OTG_GAHBCFG_HBSTLEN_1 ((uint32_t)0x00000004) /*!<Bit 1 */
+#define USB_OTG_GAHBCFG_HBSTLEN_2 ((uint32_t)0x00000008) /*!<Bit 2 */
+#define USB_OTG_GAHBCFG_HBSTLEN_3 ((uint32_t)0x00000010) /*!<Bit 3 */
+#define USB_OTG_GAHBCFG_DMAEN ((uint32_t)0x00000020) /*!< DMA enable */
+#define USB_OTG_GAHBCFG_TXFELVL ((uint32_t)0x00000080) /*!< TxFIFO empty level */
+#define USB_OTG_GAHBCFG_PTXFELVL ((uint32_t)0x00000100) /*!< Periodic TxFIFO empty level */
+
+/******************** Bit definition forUSB_OTG_GUSBCFG register ********************/
+
+#define USB_OTG_GUSBCFG_TOCAL ((uint32_t)0x00000007) /*!< FS timeout calibration */
+#define USB_OTG_GUSBCFG_TOCAL_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define USB_OTG_GUSBCFG_TOCAL_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define USB_OTG_GUSBCFG_TOCAL_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define USB_OTG_GUSBCFG_PHYSEL ((uint32_t)0x00000040) /*!< USB 2.0 high-speed ULPI PHY or USB 1.1 full-speed serial transceiver select */
+#define USB_OTG_GUSBCFG_SRPCAP ((uint32_t)0x00000100) /*!< SRP-capable */
+#define USB_OTG_GUSBCFG_HNPCAP ((uint32_t)0x00000200) /*!< HNP-capable */
+
+#define USB_OTG_GUSBCFG_TRDT ((uint32_t)0x00003C00) /*!< USB turnaround time */
+#define USB_OTG_GUSBCFG_TRDT_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define USB_OTG_GUSBCFG_TRDT_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define USB_OTG_GUSBCFG_TRDT_2 ((uint32_t)0x00001000) /*!<Bit 2 */
+#define USB_OTG_GUSBCFG_TRDT_3 ((uint32_t)0x00002000) /*!<Bit 3 */
+#define USB_OTG_GUSBCFG_PHYLPCS ((uint32_t)0x00008000) /*!< PHY Low-power clock select */
+#define USB_OTG_GUSBCFG_ULPIFSLS ((uint32_t)0x00020000) /*!< ULPI FS/LS select */
+#define USB_OTG_GUSBCFG_ULPIAR ((uint32_t)0x00040000) /*!< ULPI Auto-resume */
+#define USB_OTG_GUSBCFG_ULPICSM ((uint32_t)0x00080000) /*!< ULPI Clock SuspendM */
+#define USB_OTG_GUSBCFG_ULPIEVBUSD ((uint32_t)0x00100000) /*!< ULPI External VBUS Drive */
+#define USB_OTG_GUSBCFG_ULPIEVBUSI ((uint32_t)0x00200000) /*!< ULPI external VBUS indicator */
+#define USB_OTG_GUSBCFG_TSDPS ((uint32_t)0x00400000) /*!< TermSel DLine pulsing selection */
+#define USB_OTG_GUSBCFG_PCCI ((uint32_t)0x00800000) /*!< Indicator complement */
+#define USB_OTG_GUSBCFG_PTCI ((uint32_t)0x01000000) /*!< Indicator pass through */
+#define USB_OTG_GUSBCFG_ULPIIPD ((uint32_t)0x02000000) /*!< ULPI interface protect disable */
+#define USB_OTG_GUSBCFG_FHMOD ((uint32_t)0x20000000) /*!< Forced host mode */
+#define USB_OTG_GUSBCFG_FDMOD ((uint32_t)0x40000000) /*!< Forced peripheral mode */
+#define USB_OTG_GUSBCFG_CTXPKT ((uint32_t)0x80000000) /*!< Corrupt Tx packet */
+
+/******************** Bit definition forUSB_OTG_GRSTCTL register ********************/
+#define USB_OTG_GRSTCTL_CSRST ((uint32_t)0x00000001) /*!< Core soft reset */
+#define USB_OTG_GRSTCTL_HSRST ((uint32_t)0x00000002) /*!< HCLK soft reset */
+#define USB_OTG_GRSTCTL_FCRST ((uint32_t)0x00000004) /*!< Host frame counter reset */
+#define USB_OTG_GRSTCTL_RXFFLSH ((uint32_t)0x00000010) /*!< RxFIFO flush */
+#define USB_OTG_GRSTCTL_TXFFLSH ((uint32_t)0x00000020) /*!< TxFIFO flush */
+
+#define USB_OTG_GRSTCTL_TXFNUM ((uint32_t)0x000007C0) /*!< TxFIFO number */
+#define USB_OTG_GRSTCTL_TXFNUM_0 ((uint32_t)0x00000040) /*!<Bit 0 */
+#define USB_OTG_GRSTCTL_TXFNUM_1 ((uint32_t)0x00000080) /*!<Bit 1 */
+#define USB_OTG_GRSTCTL_TXFNUM_2 ((uint32_t)0x00000100) /*!<Bit 2 */
+#define USB_OTG_GRSTCTL_TXFNUM_3 ((uint32_t)0x00000200) /*!<Bit 3 */
+#define USB_OTG_GRSTCTL_TXFNUM_4 ((uint32_t)0x00000400) /*!<Bit 4 */
+#define USB_OTG_GRSTCTL_DMAREQ ((uint32_t)0x40000000) /*!< DMA request signal */
+#define USB_OTG_GRSTCTL_AHBIDL ((uint32_t)0x80000000) /*!< AHB master idle */
+
+/******************** Bit definition forUSB_OTG_DIEPMSK register ********************/
+#define USB_OTG_DIEPMSK_XFRCM ((uint32_t)0x00000001) /*!< Transfer completed interrupt mask */
+#define USB_OTG_DIEPMSK_EPDM ((uint32_t)0x00000002) /*!< Endpoint disabled interrupt mask */
+#define USB_OTG_DIEPMSK_TOM ((uint32_t)0x00000008) /*!< Timeout condition mask (nonisochronous endpoints) */
+#define USB_OTG_DIEPMSK_ITTXFEMSK ((uint32_t)0x00000010) /*!< IN token received when TxFIFO empty mask */
+#define USB_OTG_DIEPMSK_INEPNMM ((uint32_t)0x00000020) /*!< IN token received with EP mismatch mask */
+#define USB_OTG_DIEPMSK_INEPNEM ((uint32_t)0x00000040) /*!< IN endpoint NAK effective mask */
+#define USB_OTG_DIEPMSK_TXFURM ((uint32_t)0x00000100) /*!< FIFO underrun mask */
+#define USB_OTG_DIEPMSK_BIM ((uint32_t)0x00000200) /*!< BNA interrupt mask */
+
+/******************** Bit definition forUSB_OTG_HPTXSTS register ********************/
+#define USB_OTG_HPTXSTS_PTXFSAVL ((uint32_t)0x0000FFFF) /*!< Periodic transmit data FIFO space available */
+
+#define USB_OTG_HPTXSTS_PTXQSAV ((uint32_t)0x00FF0000) /*!< Periodic transmit request queue space available */
+#define USB_OTG_HPTXSTS_PTXQSAV_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define USB_OTG_HPTXSTS_PTXQSAV_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define USB_OTG_HPTXSTS_PTXQSAV_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define USB_OTG_HPTXSTS_PTXQSAV_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define USB_OTG_HPTXSTS_PTXQSAV_4 ((uint32_t)0x00100000) /*!<Bit 4 */
+#define USB_OTG_HPTXSTS_PTXQSAV_5 ((uint32_t)0x00200000) /*!<Bit 5 */
+#define USB_OTG_HPTXSTS_PTXQSAV_6 ((uint32_t)0x00400000) /*!<Bit 6 */
+#define USB_OTG_HPTXSTS_PTXQSAV_7 ((uint32_t)0x00800000) /*!<Bit 7 */
+
+#define USB_OTG_HPTXSTS_PTXQTOP ((uint32_t)0xFF000000) /*!< Top of the periodic transmit request queue */
+#define USB_OTG_HPTXSTS_PTXQTOP_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define USB_OTG_HPTXSTS_PTXQTOP_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define USB_OTG_HPTXSTS_PTXQTOP_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define USB_OTG_HPTXSTS_PTXQTOP_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define USB_OTG_HPTXSTS_PTXQTOP_4 ((uint32_t)0x10000000) /*!<Bit 4 */
+#define USB_OTG_HPTXSTS_PTXQTOP_5 ((uint32_t)0x20000000) /*!<Bit 5 */
+#define USB_OTG_HPTXSTS_PTXQTOP_6 ((uint32_t)0x40000000) /*!<Bit 6 */
+#define USB_OTG_HPTXSTS_PTXQTOP_7 ((uint32_t)0x80000000) /*!<Bit 7 */
+
+/******************** Bit definition forUSB_OTG_HAINT register ********************/
+#define USB_OTG_HAINT_HAINT ((uint32_t)0x0000FFFF) /*!< Channel interrupts */
+
+/******************** Bit definition forUSB_OTG_DOEPMSK register ********************/
+#define USB_OTG_DOEPMSK_XFRCM ((uint32_t)0x00000001) /*!< Transfer completed interrupt mask */
+#define USB_OTG_DOEPMSK_EPDM ((uint32_t)0x00000002) /*!< Endpoint disabled interrupt mask */
+#define USB_OTG_DOEPMSK_STUPM ((uint32_t)0x00000008) /*!< SETUP phase done mask */
+#define USB_OTG_DOEPMSK_OTEPDM ((uint32_t)0x00000010) /*!< OUT token received when endpoint disabled mask */
+#define USB_OTG_DOEPMSK_B2BSTUP ((uint32_t)0x00000040) /*!< Back-to-back SETUP packets received mask */
+#define USB_OTG_DOEPMSK_OPEM ((uint32_t)0x00000100) /*!< OUT packet error mask */
+#define USB_OTG_DOEPMSK_BOIM ((uint32_t)0x00000200) /*!< BNA interrupt mask */
+
+/******************** Bit definition forUSB_OTG_GINTSTS register ********************/
+#define USB_OTG_GINTSTS_CMOD ((uint32_t)0x00000001) /*!< Current mode of operation */
+#define USB_OTG_GINTSTS_MMIS ((uint32_t)0x00000002) /*!< Mode mismatch interrupt */
+#define USB_OTG_GINTSTS_OTGINT ((uint32_t)0x00000004) /*!< OTG interrupt */
+#define USB_OTG_GINTSTS_SOF ((uint32_t)0x00000008) /*!< Start of frame */
+#define USB_OTG_GINTSTS_RXFLVL ((uint32_t)0x00000010) /*!< RxFIFO nonempty */
+#define USB_OTG_GINTSTS_NPTXFE ((uint32_t)0x00000020) /*!< Nonperiodic TxFIFO empty */
+#define USB_OTG_GINTSTS_GINAKEFF ((uint32_t)0x00000040) /*!< Global IN nonperiodic NAK effective */
+#define USB_OTG_GINTSTS_BOUTNAKEFF ((uint32_t)0x00000080) /*!< Global OUT NAK effective */
+#define USB_OTG_GINTSTS_ESUSP ((uint32_t)0x00000400) /*!< Early suspend */
+#define USB_OTG_GINTSTS_USBSUSP ((uint32_t)0x00000800) /*!< USB suspend */
+#define USB_OTG_GINTSTS_USBRST ((uint32_t)0x00001000) /*!< USB reset */
+#define USB_OTG_GINTSTS_ENUMDNE ((uint32_t)0x00002000) /*!< Enumeration done */
+#define USB_OTG_GINTSTS_ISOODRP ((uint32_t)0x00004000) /*!< Isochronous OUT packet dropped interrupt */
+#define USB_OTG_GINTSTS_EOPF ((uint32_t)0x00008000) /*!< End of periodic frame interrupt */
+#define USB_OTG_GINTSTS_IEPINT ((uint32_t)0x00040000) /*!< IN endpoint interrupt */
+#define USB_OTG_GINTSTS_OEPINT ((uint32_t)0x00080000) /*!< OUT endpoint interrupt */
+#define USB_OTG_GINTSTS_IISOIXFR ((uint32_t)0x00100000) /*!< Incomplete isochronous IN transfer */
+#define USB_OTG_GINTSTS_PXFR_INCOMPISOOUT ((uint32_t)0x00200000) /*!< Incomplete periodic transfer */
+#define USB_OTG_GINTSTS_DATAFSUSP ((uint32_t)0x00400000) /*!< Data fetch suspended */
+#define USB_OTG_GINTSTS_HPRTINT ((uint32_t)0x01000000) /*!< Host port interrupt */
+#define USB_OTG_GINTSTS_HCINT ((uint32_t)0x02000000) /*!< Host channels interrupt */
+#define USB_OTG_GINTSTS_PTXFE ((uint32_t)0x04000000) /*!< Periodic TxFIFO empty */
+#define USB_OTG_GINTSTS_CIDSCHG ((uint32_t)0x10000000) /*!< Connector ID status change */
+#define USB_OTG_GINTSTS_DISCINT ((uint32_t)0x20000000) /*!< Disconnect detected interrupt */
+#define USB_OTG_GINTSTS_SRQINT ((uint32_t)0x40000000) /*!< Session request/new session detected interrupt */
+#define USB_OTG_GINTSTS_WKUINT ((uint32_t)0x80000000) /*!< Resume/remote wakeup detected interrupt */
+
+/******************** Bit definition forUSB_OTG_GINTMSK register ********************/
+#define USB_OTG_GINTMSK_MMISM ((uint32_t)0x00000002) /*!< Mode mismatch interrupt mask */
+#define USB_OTG_GINTMSK_OTGINT ((uint32_t)0x00000004) /*!< OTG interrupt mask */
+#define USB_OTG_GINTMSK_SOFM ((uint32_t)0x00000008) /*!< Start of frame mask */
+#define USB_OTG_GINTMSK_RXFLVLM ((uint32_t)0x00000010) /*!< Receive FIFO nonempty mask */
+#define USB_OTG_GINTMSK_NPTXFEM ((uint32_t)0x00000020) /*!< Nonperiodic TxFIFO empty mask */
+#define USB_OTG_GINTMSK_GINAKEFFM ((uint32_t)0x00000040) /*!< Global nonperiodic IN NAK effective mask */
+#define USB_OTG_GINTMSK_GONAKEFFM ((uint32_t)0x00000080) /*!< Global OUT NAK effective mask */
+#define USB_OTG_GINTMSK_ESUSPM ((uint32_t)0x00000400) /*!< Early suspend mask */
+#define USB_OTG_GINTMSK_USBSUSPM ((uint32_t)0x00000800) /*!< USB suspend mask */
+#define USB_OTG_GINTMSK_USBRST ((uint32_t)0x00001000) /*!< USB reset mask */
+#define USB_OTG_GINTMSK_ENUMDNEM ((uint32_t)0x00002000) /*!< Enumeration done mask */
+#define USB_OTG_GINTMSK_ISOODRPM ((uint32_t)0x00004000) /*!< Isochronous OUT packet dropped interrupt mask */
+#define USB_OTG_GINTMSK_EOPFM ((uint32_t)0x00008000) /*!< End of periodic frame interrupt mask */
+#define USB_OTG_GINTMSK_EPMISM ((uint32_t)0x00020000) /*!< Endpoint mismatch interrupt mask */
+#define USB_OTG_GINTMSK_IEPINT ((uint32_t)0x00040000) /*!< IN endpoints interrupt mask */
+#define USB_OTG_GINTMSK_OEPINT ((uint32_t)0x00080000) /*!< OUT endpoints interrupt mask */
+#define USB_OTG_GINTMSK_IISOIXFRM ((uint32_t)0x00100000) /*!< Incomplete isochronous IN transfer mask */
+#define USB_OTG_GINTMSK_PXFRM_IISOOXFRM ((uint32_t)0x00200000) /*!< Incomplete periodic transfer mask */
+#define USB_OTG_GINTMSK_FSUSPM ((uint32_t)0x00400000) /*!< Data fetch suspended mask */
+#define USB_OTG_GINTMSK_PRTIM ((uint32_t)0x01000000) /*!< Host port interrupt mask */
+#define USB_OTG_GINTMSK_HCIM ((uint32_t)0x02000000) /*!< Host channels interrupt mask */
+#define USB_OTG_GINTMSK_PTXFEM ((uint32_t)0x04000000) /*!< Periodic TxFIFO empty mask */
+#define USB_OTG_GINTMSK_CIDSCHGM ((uint32_t)0x10000000) /*!< Connector ID status change mask */
+#define USB_OTG_GINTMSK_DISCINT ((uint32_t)0x20000000) /*!< Disconnect detected interrupt mask */
+#define USB_OTG_GINTMSK_SRQIM ((uint32_t)0x40000000) /*!< Session request/new session detected interrupt mask */
+#define USB_OTG_GINTMSK_WUIM ((uint32_t)0x80000000) /*!< Resume/remote wakeup detected interrupt mask */
+
+/******************** Bit definition forUSB_OTG_DAINT register ********************/
+#define USB_OTG_DAINT_IEPINT ((uint32_t)0x0000FFFF) /*!< IN endpoint interrupt bits */
+#define USB_OTG_DAINT_OEPINT ((uint32_t)0xFFFF0000) /*!< OUT endpoint interrupt bits */
+
+/******************** Bit definition forUSB_OTG_HAINTMSK register ********************/
+#define USB_OTG_HAINTMSK_HAINTM ((uint32_t)0x0000FFFF) /*!< Channel interrupt mask */
+
+/******************** Bit definition for USB_OTG_GRXSTSP register ********************/
+#define USB_OTG_GRXSTSP_EPNUM ((uint32_t)0x0000000F) /*!< IN EP interrupt mask bits */
+#define USB_OTG_GRXSTSP_BCNT ((uint32_t)0x00007FF0) /*!< OUT EP interrupt mask bits */
+#define USB_OTG_GRXSTSP_DPID ((uint32_t)0x00018000) /*!< OUT EP interrupt mask bits */
+#define USB_OTG_GRXSTSP_PKTSTS ((uint32_t)0x001E0000) /*!< OUT EP interrupt mask bits */
+
+/******************** Bit definition forUSB_OTG_DAINTMSK register ********************/
+#define USB_OTG_DAINTMSK_IEPM ((uint32_t)0x0000FFFF) /*!< IN EP interrupt mask bits */
+#define USB_OTG_DAINTMSK_OEPM ((uint32_t)0xFFFF0000) /*!< OUT EP interrupt mask bits */
+
+/******************** Bit definition for OTG register ********************/
+
+#define USB_OTG_CHNUM ((uint32_t)0x0000000F) /*!< Channel number */
+#define USB_OTG_CHNUM_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define USB_OTG_CHNUM_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define USB_OTG_CHNUM_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define USB_OTG_CHNUM_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define USB_OTG_BCNT ((uint32_t)0x00007FF0) /*!< Byte count */
+
+#define USB_OTG_DPID ((uint32_t)0x00018000) /*!< Data PID */
+#define USB_OTG_DPID_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define USB_OTG_DPID_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+
+#define USB_OTG_PKTSTS ((uint32_t)0x001E0000) /*!< Packet status */
+#define USB_OTG_PKTSTS_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define USB_OTG_PKTSTS_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define USB_OTG_PKTSTS_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+#define USB_OTG_PKTSTS_3 ((uint32_t)0x00100000) /*!<Bit 3 */
+
+#define USB_OTG_EPNUM ((uint32_t)0x0000000F) /*!< Endpoint number */
+#define USB_OTG_EPNUM_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define USB_OTG_EPNUM_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define USB_OTG_EPNUM_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define USB_OTG_EPNUM_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define USB_OTG_FRMNUM ((uint32_t)0x01E00000) /*!< Frame number */
+#define USB_OTG_FRMNUM_0 ((uint32_t)0x00200000) /*!<Bit 0 */
+#define USB_OTG_FRMNUM_1 ((uint32_t)0x00400000) /*!<Bit 1 */
+#define USB_OTG_FRMNUM_2 ((uint32_t)0x00800000) /*!<Bit 2 */
+#define USB_OTG_FRMNUM_3 ((uint32_t)0x01000000) /*!<Bit 3 */
+
+/******************** Bit definition for OTG register ********************/
+
+#define USB_OTG_CHNUM ((uint32_t)0x0000000F) /*!< Channel number */
+#define USB_OTG_CHNUM_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define USB_OTG_CHNUM_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define USB_OTG_CHNUM_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define USB_OTG_CHNUM_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define USB_OTG_BCNT ((uint32_t)0x00007FF0) /*!< Byte count */
+
+#define USB_OTG_DPID ((uint32_t)0x00018000) /*!< Data PID */
+#define USB_OTG_DPID_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define USB_OTG_DPID_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+
+#define USB_OTG_PKTSTS ((uint32_t)0x001E0000) /*!< Packet status */
+#define USB_OTG_PKTSTS_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define USB_OTG_PKTSTS_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define USB_OTG_PKTSTS_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+#define USB_OTG_PKTSTS_3 ((uint32_t)0x00100000) /*!<Bit 3 */
+
+#define USB_OTG_EPNUM ((uint32_t)0x0000000F) /*!< Endpoint number */
+#define USB_OTG_EPNUM_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define USB_OTG_EPNUM_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define USB_OTG_EPNUM_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define USB_OTG_EPNUM_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define USB_OTG_FRMNUM ((uint32_t)0x01E00000) /*!< Frame number */
+#define USB_OTG_FRMNUM_0 ((uint32_t)0x00200000) /*!<Bit 0 */
+#define USB_OTG_FRMNUM_1 ((uint32_t)0x00400000) /*!<Bit 1 */
+#define USB_OTG_FRMNUM_2 ((uint32_t)0x00800000) /*!<Bit 2 */
+#define USB_OTG_FRMNUM_3 ((uint32_t)0x01000000) /*!<Bit 3 */
+
+/******************** Bit definition forUSB_OTG_GRXFSIZ register ********************/
+#define USB_OTG_GRXFSIZ_RXFD ((uint32_t)0x0000FFFF) /*!< RxFIFO depth */
+
+/******************** Bit definition forUSB_OTG_DVBUSDIS register ********************/
+#define USB_OTG_DVBUSDIS_VBUSDT ((uint32_t)0x0000FFFF) /*!< Device VBUS discharge time */
+
+/******************** Bit definition for OTG register ********************/
+#define USB_OTG_NPTXFSA ((uint32_t)0x0000FFFF) /*!< Nonperiodic transmit RAM start address */
+#define USB_OTG_NPTXFD ((uint32_t)0xFFFF0000) /*!< Nonperiodic TxFIFO depth */
+#define USB_OTG_TX0FSA ((uint32_t)0x0000FFFF) /*!< Endpoint 0 transmit RAM start address */
+#define USB_OTG_TX0FD ((uint32_t)0xFFFF0000) /*!< Endpoint 0 TxFIFO depth */
+
+/******************** Bit definition forUSB_OTG_DVBUSPULSE register ********************/
+#define USB_OTG_DVBUSPULSE_DVBUSP ((uint32_t)0x00000FFF) /*!< Device VBUS pulsing time */
+
+/******************** Bit definition forUSB_OTG_GNPTXSTS register ********************/
+#define USB_OTG_GNPTXSTS_NPTXFSAV ((uint32_t)0x0000FFFF) /*!< Nonperiodic TxFIFO space available */
+
+#define USB_OTG_GNPTXSTS_NPTQXSAV ((uint32_t)0x00FF0000) /*!< Nonperiodic transmit request queue space available */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_4 ((uint32_t)0x00100000) /*!<Bit 4 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_5 ((uint32_t)0x00200000) /*!<Bit 5 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_6 ((uint32_t)0x00400000) /*!<Bit 6 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_7 ((uint32_t)0x00800000) /*!<Bit 7 */
+
+#define USB_OTG_GNPTXSTS_NPTXQTOP ((uint32_t)0x7F000000) /*!< Top of the nonperiodic transmit request queue */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_4 ((uint32_t)0x10000000) /*!<Bit 4 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_5 ((uint32_t)0x20000000) /*!<Bit 5 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_6 ((uint32_t)0x40000000) /*!<Bit 6 */
+
+/******************** Bit definition forUSB_OTG_DTHRCTL register ********************/
+#define USB_OTG_DTHRCTL_NONISOTHREN ((uint32_t)0x00000001) /*!< Nonisochronous IN endpoints threshold enable */
+#define USB_OTG_DTHRCTL_ISOTHREN ((uint32_t)0x00000002) /*!< ISO IN endpoint threshold enable */
+
+#define USB_OTG_DTHRCTL_TXTHRLEN ((uint32_t)0x000007FC) /*!< Transmit threshold length */
+#define USB_OTG_DTHRCTL_TXTHRLEN_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_2 ((uint32_t)0x00000010) /*!<Bit 2 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_3 ((uint32_t)0x00000020) /*!<Bit 3 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_4 ((uint32_t)0x00000040) /*!<Bit 4 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_5 ((uint32_t)0x00000080) /*!<Bit 5 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_6 ((uint32_t)0x00000100) /*!<Bit 6 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_7 ((uint32_t)0x00000200) /*!<Bit 7 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_8 ((uint32_t)0x00000400) /*!<Bit 8 */
+#define USB_OTG_DTHRCTL_RXTHREN ((uint32_t)0x00010000) /*!< Receive threshold enable */
+
+#define USB_OTG_DTHRCTL_RXTHRLEN ((uint32_t)0x03FE0000) /*!< Receive threshold length */
+#define USB_OTG_DTHRCTL_RXTHRLEN_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_3 ((uint32_t)0x00100000) /*!<Bit 3 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_4 ((uint32_t)0x00200000) /*!<Bit 4 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_5 ((uint32_t)0x00400000) /*!<Bit 5 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_6 ((uint32_t)0x00800000) /*!<Bit 6 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_7 ((uint32_t)0x01000000) /*!<Bit 7 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_8 ((uint32_t)0x02000000) /*!<Bit 8 */
+#define USB_OTG_DTHRCTL_ARPEN ((uint32_t)0x08000000) /*!< Arbiter parking enable */
+
+/******************** Bit definition forUSB_OTG_DIEPEMPMSK register ********************/
+#define USB_OTG_DIEPEMPMSK_INEPTXFEM ((uint32_t)0x0000FFFF) /*!< IN EP Tx FIFO empty interrupt mask bits */
+
+/******************** Bit definition forUSB_OTG_DEACHINT register ********************/
+#define USB_OTG_DEACHINT_IEP1INT ((uint32_t)0x00000002) /*!< IN endpoint 1interrupt bit */
+#define USB_OTG_DEACHINT_OEP1INT ((uint32_t)0x00020000) /*!< OUT endpoint 1 interrupt bit */
+
+/******************** Bit definition forUSB_OTG_GCCFG register ********************/
+#define USB_OTG_GCCFG_PWRDWN ((uint32_t)0x00010000) /*!< Power down */
+#define USB_OTG_GCCFG_I2CPADEN ((uint32_t)0x00020000) /*!< Enable I2C bus connection for the external I2C PHY interface */
+#define USB_OTG_GCCFG_VBUSASEN ((uint32_t)0x00040000) /*!< Enable the VBUS sensing device */
+#define USB_OTG_GCCFG_VBUSBSEN ((uint32_t)0x00080000) /*!< Enable the VBUS sensing device */
+#define USB_OTG_GCCFG_SOFOUTEN ((uint32_t)0x00100000) /*!< SOF output enable */
+#define USB_OTG_GCCFG_NOVBUSSENS ((uint32_t)0x00200000) /*!< VBUS sensing disable option */
+
+/******************** Bit definition forUSB_OTG_DEACHINTMSK register ********************/
+#define USB_OTG_DEACHINTMSK_IEP1INTM ((uint32_t)0x00000002) /*!< IN Endpoint 1 interrupt mask bit */
+#define USB_OTG_DEACHINTMSK_OEP1INTM ((uint32_t)0x00020000) /*!< OUT Endpoint 1 interrupt mask bit */
+
+/******************** Bit definition forUSB_OTG_CID register ********************/
+#define USB_OTG_CID_PRODUCT_ID ((uint32_t)0xFFFFFFFF) /*!< Product ID field */
+
+/******************** Bit definition forUSB_OTG_DIEPEACHMSK1 register ********************/
+#define USB_OTG_DIEPEACHMSK1_XFRCM ((uint32_t)0x00000001) /*!< Transfer completed interrupt mask */
+#define USB_OTG_DIEPEACHMSK1_EPDM ((uint32_t)0x00000002) /*!< Endpoint disabled interrupt mask */
+#define USB_OTG_DIEPEACHMSK1_TOM ((uint32_t)0x00000008) /*!< Timeout condition mask (nonisochronous endpoints) */
+#define USB_OTG_DIEPEACHMSK1_ITTXFEMSK ((uint32_t)0x00000010) /*!< IN token received when TxFIFO empty mask */
+#define USB_OTG_DIEPEACHMSK1_INEPNMM ((uint32_t)0x00000020) /*!< IN token received with EP mismatch mask */
+#define USB_OTG_DIEPEACHMSK1_INEPNEM ((uint32_t)0x00000040) /*!< IN endpoint NAK effective mask */
+#define USB_OTG_DIEPEACHMSK1_TXFURM ((uint32_t)0x00000100) /*!< FIFO underrun mask */
+#define USB_OTG_DIEPEACHMSK1_BIM ((uint32_t)0x00000200) /*!< BNA interrupt mask */
+#define USB_OTG_DIEPEACHMSK1_NAKM ((uint32_t)0x00002000) /*!< NAK interrupt mask */
+
+/******************** Bit definition forUSB_OTG_HPRT register ********************/
+#define USB_OTG_HPRT_PCSTS ((uint32_t)0x00000001) /*!< Port connect status */
+#define USB_OTG_HPRT_PCDET ((uint32_t)0x00000002) /*!< Port connect detected */
+#define USB_OTG_HPRT_PENA ((uint32_t)0x00000004) /*!< Port enable */
+#define USB_OTG_HPRT_PENCHNG ((uint32_t)0x00000008) /*!< Port enable/disable change */
+#define USB_OTG_HPRT_POCA ((uint32_t)0x00000010) /*!< Port overcurrent active */
+#define USB_OTG_HPRT_POCCHNG ((uint32_t)0x00000020) /*!< Port overcurrent change */
+#define USB_OTG_HPRT_PRES ((uint32_t)0x00000040) /*!< Port resume */
+#define USB_OTG_HPRT_PSUSP ((uint32_t)0x00000080) /*!< Port suspend */
+#define USB_OTG_HPRT_PRST ((uint32_t)0x00000100) /*!< Port reset */
+
+#define USB_OTG_HPRT_PLSTS ((uint32_t)0x00000C00) /*!< Port line status */
+#define USB_OTG_HPRT_PLSTS_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define USB_OTG_HPRT_PLSTS_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define USB_OTG_HPRT_PPWR ((uint32_t)0x00001000) /*!< Port power */
+
+#define USB_OTG_HPRT_PTCTL ((uint32_t)0x0001E000) /*!< Port test control */
+#define USB_OTG_HPRT_PTCTL_0 ((uint32_t)0x00002000) /*!<Bit 0 */
+#define USB_OTG_HPRT_PTCTL_1 ((uint32_t)0x00004000) /*!<Bit 1 */
+#define USB_OTG_HPRT_PTCTL_2 ((uint32_t)0x00008000) /*!<Bit 2 */
+#define USB_OTG_HPRT_PTCTL_3 ((uint32_t)0x00010000) /*!<Bit 3 */
+
+#define USB_OTG_HPRT_PSPD ((uint32_t)0x00060000) /*!< Port speed */
+#define USB_OTG_HPRT_PSPD_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define USB_OTG_HPRT_PSPD_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+
+/******************** Bit definition forUSB_OTG_DOEPEACHMSK1 register ********************/
+#define USB_OTG_DOEPEACHMSK1_XFRCM ((uint32_t)0x00000001) /*!< Transfer completed interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_EPDM ((uint32_t)0x00000002) /*!< Endpoint disabled interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_TOM ((uint32_t)0x00000008) /*!< Timeout condition mask */
+#define USB_OTG_DOEPEACHMSK1_ITTXFEMSK ((uint32_t)0x00000010) /*!< IN token received when TxFIFO empty mask */
+#define USB_OTG_DOEPEACHMSK1_INEPNMM ((uint32_t)0x00000020) /*!< IN token received with EP mismatch mask */
+#define USB_OTG_DOEPEACHMSK1_INEPNEM ((uint32_t)0x00000040) /*!< IN endpoint NAK effective mask */
+#define USB_OTG_DOEPEACHMSK1_TXFURM ((uint32_t)0x00000100) /*!< OUT packet error mask */
+#define USB_OTG_DOEPEACHMSK1_BIM ((uint32_t)0x00000200) /*!< BNA interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_BERRM ((uint32_t)0x00001000) /*!< Bubble error interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_NAKM ((uint32_t)0x00002000) /*!< NAK interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_NYETM ((uint32_t)0x00004000) /*!< NYET interrupt mask */
+
+/******************** Bit definition forUSB_OTG_HPTXFSIZ register ********************/
+#define USB_OTG_HPTXFSIZ_PTXSA ((uint32_t)0x0000FFFF) /*!< Host periodic TxFIFO start address */
+#define USB_OTG_HPTXFSIZ_PTXFD ((uint32_t)0xFFFF0000) /*!< Host periodic TxFIFO depth */
+
+/******************** Bit definition forUSB_OTG_DIEPCTL register ********************/
+#define USB_OTG_DIEPCTL_MPSIZ ((uint32_t)0x000007FF) /*!< Maximum packet size */
+#define USB_OTG_DIEPCTL_USBAEP ((uint32_t)0x00008000) /*!< USB active endpoint */
+#define USB_OTG_DIEPCTL_EONUM_DPID ((uint32_t)0x00010000) /*!< Even/odd frame */
+#define USB_OTG_DIEPCTL_NAKSTS ((uint32_t)0x00020000) /*!< NAK status */
+
+#define USB_OTG_DIEPCTL_EPTYP ((uint32_t)0x000C0000) /*!< Endpoint type */
+#define USB_OTG_DIEPCTL_EPTYP_0 ((uint32_t)0x00040000) /*!<Bit 0 */
+#define USB_OTG_DIEPCTL_EPTYP_1 ((uint32_t)0x00080000) /*!<Bit 1 */
+#define USB_OTG_DIEPCTL_STALL ((uint32_t)0x00200000) /*!< STALL handshake */
+
+#define USB_OTG_DIEPCTL_TXFNUM ((uint32_t)0x03C00000) /*!< TxFIFO number */
+#define USB_OTG_DIEPCTL_TXFNUM_0 ((uint32_t)0x00400000) /*!<Bit 0 */
+#define USB_OTG_DIEPCTL_TXFNUM_1 ((uint32_t)0x00800000) /*!<Bit 1 */
+#define USB_OTG_DIEPCTL_TXFNUM_2 ((uint32_t)0x01000000) /*!<Bit 2 */
+#define USB_OTG_DIEPCTL_TXFNUM_3 ((uint32_t)0x02000000) /*!<Bit 3 */
+#define USB_OTG_DIEPCTL_CNAK ((uint32_t)0x04000000) /*!< Clear NAK */
+#define USB_OTG_DIEPCTL_SNAK ((uint32_t)0x08000000) /*!< Set NAK */
+#define USB_OTG_DIEPCTL_SD0PID_SEVNFRM ((uint32_t)0x10000000) /*!< Set DATA0 PID */
+#define USB_OTG_DIEPCTL_SODDFRM ((uint32_t)0x20000000) /*!< Set odd frame */
+#define USB_OTG_DIEPCTL_EPDIS ((uint32_t)0x40000000) /*!< Endpoint disable */
+#define USB_OTG_DIEPCTL_EPENA ((uint32_t)0x80000000) /*!< Endpoint enable */
+
+/******************** Bit definition forUSB_OTG_HCCHAR register ********************/
+#define USB_OTG_HCCHAR_MPSIZ ((uint32_t)0x000007FF) /*!< Maximum packet size */
+
+#define USB_OTG_HCCHAR_EPNUM ((uint32_t)0x00007800) /*!< Endpoint number */
+#define USB_OTG_HCCHAR_EPNUM_0 ((uint32_t)0x00000800) /*!<Bit 0 */
+#define USB_OTG_HCCHAR_EPNUM_1 ((uint32_t)0x00001000) /*!<Bit 1 */
+#define USB_OTG_HCCHAR_EPNUM_2 ((uint32_t)0x00002000) /*!<Bit 2 */
+#define USB_OTG_HCCHAR_EPNUM_3 ((uint32_t)0x00004000) /*!<Bit 3 */
+#define USB_OTG_HCCHAR_EPDIR ((uint32_t)0x00008000) /*!< Endpoint direction */
+#define USB_OTG_HCCHAR_LSDEV ((uint32_t)0x00020000) /*!< Low-speed device */
+
+#define USB_OTG_HCCHAR_EPTYP ((uint32_t)0x000C0000) /*!< Endpoint type */
+#define USB_OTG_HCCHAR_EPTYP_0 ((uint32_t)0x00040000) /*!<Bit 0 */
+#define USB_OTG_HCCHAR_EPTYP_1 ((uint32_t)0x00080000) /*!<Bit 1 */
+
+#define USB_OTG_HCCHAR_MC ((uint32_t)0x00300000) /*!< Multi Count (MC) / Error Count (EC) */
+#define USB_OTG_HCCHAR_MC_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define USB_OTG_HCCHAR_MC_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+
+#define USB_OTG_HCCHAR_DAD ((uint32_t)0x1FC00000) /*!< Device address */
+#define USB_OTG_HCCHAR_DAD_0 ((uint32_t)0x00400000) /*!<Bit 0 */
+#define USB_OTG_HCCHAR_DAD_1 ((uint32_t)0x00800000) /*!<Bit 1 */
+#define USB_OTG_HCCHAR_DAD_2 ((uint32_t)0x01000000) /*!<Bit 2 */
+#define USB_OTG_HCCHAR_DAD_3 ((uint32_t)0x02000000) /*!<Bit 3 */
+#define USB_OTG_HCCHAR_DAD_4 ((uint32_t)0x04000000) /*!<Bit 4 */
+#define USB_OTG_HCCHAR_DAD_5 ((uint32_t)0x08000000) /*!<Bit 5 */
+#define USB_OTG_HCCHAR_DAD_6 ((uint32_t)0x10000000) /*!<Bit 6 */
+#define USB_OTG_HCCHAR_ODDFRM ((uint32_t)0x20000000) /*!< Odd frame */
+#define USB_OTG_HCCHAR_CHDIS ((uint32_t)0x40000000) /*!< Channel disable */
+#define USB_OTG_HCCHAR_CHENA ((uint32_t)0x80000000) /*!< Channel enable */
+
+/******************** Bit definition forUSB_OTG_HCSPLT register ********************/
+
+#define USB_OTG_HCSPLT_PRTADDR ((uint32_t)0x0000007F) /*!< Port address */
+#define USB_OTG_HCSPLT_PRTADDR_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define USB_OTG_HCSPLT_PRTADDR_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define USB_OTG_HCSPLT_PRTADDR_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define USB_OTG_HCSPLT_PRTADDR_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define USB_OTG_HCSPLT_PRTADDR_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define USB_OTG_HCSPLT_PRTADDR_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define USB_OTG_HCSPLT_PRTADDR_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+
+#define USB_OTG_HCSPLT_HUBADDR ((uint32_t)0x00003F80) /*!< Hub address */
+#define USB_OTG_HCSPLT_HUBADDR_0 ((uint32_t)0x00000080) /*!<Bit 0 */
+#define USB_OTG_HCSPLT_HUBADDR_1 ((uint32_t)0x00000100) /*!<Bit 1 */
+#define USB_OTG_HCSPLT_HUBADDR_2 ((uint32_t)0x00000200) /*!<Bit 2 */
+#define USB_OTG_HCSPLT_HUBADDR_3 ((uint32_t)0x00000400) /*!<Bit 3 */
+#define USB_OTG_HCSPLT_HUBADDR_4 ((uint32_t)0x00000800) /*!<Bit 4 */
+#define USB_OTG_HCSPLT_HUBADDR_5 ((uint32_t)0x00001000) /*!<Bit 5 */
+#define USB_OTG_HCSPLT_HUBADDR_6 ((uint32_t)0x00002000) /*!<Bit 6 */
+
+#define USB_OTG_HCSPLT_XACTPOS ((uint32_t)0x0000C000) /*!< XACTPOS */
+#define USB_OTG_HCSPLT_XACTPOS_0 ((uint32_t)0x00004000) /*!<Bit 0 */
+#define USB_OTG_HCSPLT_XACTPOS_1 ((uint32_t)0x00008000) /*!<Bit 1 */
+#define USB_OTG_HCSPLT_COMPLSPLT ((uint32_t)0x00010000) /*!< Do complete split */
+#define USB_OTG_HCSPLT_SPLITEN ((uint32_t)0x80000000) /*!< Split enable */
+
+/******************** Bit definition forUSB_OTG_HCINT register ********************/
+#define USB_OTG_HCINT_XFRC ((uint32_t)0x00000001) /*!< Transfer completed */
+#define USB_OTG_HCINT_CHH ((uint32_t)0x00000002) /*!< Channel halted */
+#define USB_OTG_HCINT_AHBERR ((uint32_t)0x00000004) /*!< AHB error */
+#define USB_OTG_HCINT_STALL ((uint32_t)0x00000008) /*!< STALL response received interrupt */
+#define USB_OTG_HCINT_NAK ((uint32_t)0x00000010) /*!< NAK response received interrupt */
+#define USB_OTG_HCINT_ACK ((uint32_t)0x00000020) /*!< ACK response received/transmitted interrupt */
+#define USB_OTG_HCINT_NYET ((uint32_t)0x00000040) /*!< Response received interrupt */
+#define USB_OTG_HCINT_TXERR ((uint32_t)0x00000080) /*!< Transaction error */
+#define USB_OTG_HCINT_BBERR ((uint32_t)0x00000100) /*!< Babble error */
+#define USB_OTG_HCINT_FRMOR ((uint32_t)0x00000200) /*!< Frame overrun */
+#define USB_OTG_HCINT_DTERR ((uint32_t)0x00000400) /*!< Data toggle error */
+
+/******************** Bit definition forUSB_OTG_DIEPINT register ********************/
+#define USB_OTG_DIEPINT_XFRC ((uint32_t)0x00000001) /*!< Transfer completed interrupt */
+#define USB_OTG_DIEPINT_EPDISD ((uint32_t)0x00000002) /*!< Endpoint disabled interrupt */
+#define USB_OTG_DIEPINT_TOC ((uint32_t)0x00000008) /*!< Timeout condition */
+#define USB_OTG_DIEPINT_ITTXFE ((uint32_t)0x00000010) /*!< IN token received when TxFIFO is empty */
+#define USB_OTG_DIEPINT_INEPNE ((uint32_t)0x00000040) /*!< IN endpoint NAK effective */
+#define USB_OTG_DIEPINT_TXFE ((uint32_t)0x00000080) /*!< Transmit FIFO empty */
+#define USB_OTG_DIEPINT_TXFIFOUDRN ((uint32_t)0x00000100) /*!< Transmit Fifo Underrun */
+#define USB_OTG_DIEPINT_BNA ((uint32_t)0x00000200) /*!< Buffer not available interrupt */
+#define USB_OTG_DIEPINT_PKTDRPSTS ((uint32_t)0x00000800) /*!< Packet dropped status */
+#define USB_OTG_DIEPINT_BERR ((uint32_t)0x00001000) /*!< Babble error interrupt */
+#define USB_OTG_DIEPINT_NAK ((uint32_t)0x00002000) /*!< NAK interrupt */
+
+/******************** Bit definition forUSB_OTG_HCINTMSK register ********************/
+#define USB_OTG_HCINTMSK_XFRCM ((uint32_t)0x00000001) /*!< Transfer completed mask */
+#define USB_OTG_HCINTMSK_CHHM ((uint32_t)0x00000002) /*!< Channel halted mask */
+#define USB_OTG_HCINTMSK_AHBERR ((uint32_t)0x00000004) /*!< AHB error */
+#define USB_OTG_HCINTMSK_STALLM ((uint32_t)0x00000008) /*!< STALL response received interrupt mask */
+#define USB_OTG_HCINTMSK_NAKM ((uint32_t)0x00000010) /*!< NAK response received interrupt mask */
+#define USB_OTG_HCINTMSK_ACKM ((uint32_t)0x00000020) /*!< ACK response received/transmitted interrupt mask */
+#define USB_OTG_HCINTMSK_NYET ((uint32_t)0x00000040) /*!< response received interrupt mask */
+#define USB_OTG_HCINTMSK_TXERRM ((uint32_t)0x00000080) /*!< Transaction error mask */
+#define USB_OTG_HCINTMSK_BBERRM ((uint32_t)0x00000100) /*!< Babble error mask */
+#define USB_OTG_HCINTMSK_FRMORM ((uint32_t)0x00000200) /*!< Frame overrun mask */
+#define USB_OTG_HCINTMSK_DTERRM ((uint32_t)0x00000400) /*!< Data toggle error mask */
+
+/******************** Bit definition for USB_OTG_DIEPTSIZ register ********************/
+
+#define USB_OTG_DIEPTSIZ_XFRSIZ ((uint32_t)0x0007FFFF) /*!< Transfer size */
+#define USB_OTG_DIEPTSIZ_PKTCNT ((uint32_t)0x1FF80000) /*!< Packet count */
+#define USB_OTG_DIEPTSIZ_MULCNT ((uint32_t)0x60000000) /*!< Packet count */
+/******************** Bit definition forUSB_OTG_HCTSIZ register ********************/
+#define USB_OTG_HCTSIZ_XFRSIZ ((uint32_t)0x0007FFFF) /*!< Transfer size */
+#define USB_OTG_HCTSIZ_PKTCNT ((uint32_t)0x1FF80000) /*!< Packet count */
+#define USB_OTG_HCTSIZ_DOPING ((uint32_t)0x80000000) /*!< Do PING */
+#define USB_OTG_HCTSIZ_DPID ((uint32_t)0x60000000) /*!< Data PID */
+#define USB_OTG_HCTSIZ_DPID_0 ((uint32_t)0x20000000) /*!<Bit 0 */
+#define USB_OTG_HCTSIZ_DPID_1 ((uint32_t)0x40000000) /*!<Bit 1 */
+
+/******************** Bit definition forUSB_OTG_DIEPDMA register ********************/
+#define USB_OTG_DIEPDMA_DMAADDR ((uint32_t)0xFFFFFFFF) /*!< DMA address */
+
+/******************** Bit definition forUSB_OTG_HCDMA register ********************/
+#define USB_OTG_HCDMA_DMAADDR ((uint32_t)0xFFFFFFFF) /*!< DMA address */
+
+/******************** Bit definition forUSB_OTG_DTXFSTS register ********************/
+#define USB_OTG_DTXFSTS_INEPTFSAV ((uint32_t)0x0000FFFF) /*!< IN endpoint TxFIFO space avail */
+
+/******************** Bit definition forUSB_OTG_DIEPTXF register ********************/
+#define USB_OTG_DIEPTXF_INEPTXSA ((uint32_t)0x0000FFFF) /*!< IN endpoint FIFOx transmit RAM start address */
+#define USB_OTG_DIEPTXF_INEPTXFD ((uint32_t)0xFFFF0000) /*!< IN endpoint TxFIFO depth */
+
+/******************** Bit definition forUSB_OTG_DOEPCTL register ********************/
+
+#define USB_OTG_DOEPCTL_MPSIZ ((uint32_t)0x000007FF) /*!< Maximum packet size */ /*!<Bit 1 */
+#define USB_OTG_DOEPCTL_USBAEP ((uint32_t)0x00008000) /*!< USB active endpoint */
+#define USB_OTG_DOEPCTL_NAKSTS ((uint32_t)0x00020000) /*!< NAK status */
+#define USB_OTG_DOEPCTL_SD0PID_SEVNFRM ((uint32_t)0x10000000) /*!< Set DATA0 PID */
+#define USB_OTG_DOEPCTL_SODDFRM ((uint32_t)0x20000000) /*!< Set odd frame */
+#define USB_OTG_DOEPCTL_EPTYP ((uint32_t)0x000C0000) /*!< Endpoint type */
+#define USB_OTG_DOEPCTL_EPTYP_0 ((uint32_t)0x00040000) /*!<Bit 0 */
+#define USB_OTG_DOEPCTL_EPTYP_1 ((uint32_t)0x00080000) /*!<Bit 1 */
+#define USB_OTG_DOEPCTL_SNPM ((uint32_t)0x00100000) /*!< Snoop mode */
+#define USB_OTG_DOEPCTL_STALL ((uint32_t)0x00200000) /*!< STALL handshake */
+#define USB_OTG_DOEPCTL_CNAK ((uint32_t)0x04000000) /*!< Clear NAK */
+#define USB_OTG_DOEPCTL_SNAK ((uint32_t)0x08000000) /*!< Set NAK */
+#define USB_OTG_DOEPCTL_EPDIS ((uint32_t)0x40000000) /*!< Endpoint disable */
+#define USB_OTG_DOEPCTL_EPENA ((uint32_t)0x80000000) /*!< Endpoint enable */
+
+/******************** Bit definition forUSB_OTG_DOEPINT register ********************/
+#define USB_OTG_DOEPINT_XFRC ((uint32_t)0x00000001) /*!< Transfer completed interrupt */
+#define USB_OTG_DOEPINT_EPDISD ((uint32_t)0x00000002) /*!< Endpoint disabled interrupt */
+#define USB_OTG_DOEPINT_STUP ((uint32_t)0x00000008) /*!< SETUP phase done */
+#define USB_OTG_DOEPINT_OTEPDIS ((uint32_t)0x00000010) /*!< OUT token received when endpoint disabled */
+#define USB_OTG_DOEPINT_B2BSTUP ((uint32_t)0x00000040) /*!< Back-to-back SETUP packets received */
+#define USB_OTG_DOEPINT_NYET ((uint32_t)0x00004000) /*!< NYET interrupt */
+
+/******************** Bit definition forUSB_OTG_DOEPTSIZ register ********************/
+
+#define USB_OTG_DOEPTSIZ_XFRSIZ ((uint32_t)0x0007FFFF) /*!< Transfer size */
+#define USB_OTG_DOEPTSIZ_PKTCNT ((uint32_t)0x1FF80000) /*!< Packet count */
+
+#define USB_OTG_DOEPTSIZ_STUPCNT ((uint32_t)0x60000000) /*!< SETUP packet count */
+#define USB_OTG_DOEPTSIZ_STUPCNT_0 ((uint32_t)0x20000000) /*!<Bit 0 */
+#define USB_OTG_DOEPTSIZ_STUPCNT_1 ((uint32_t)0x40000000) /*!<Bit 1 */
+
+/******************** Bit definition for PCGCCTL register ********************/
+#define USB_OTG_PCGCCTL_STOPCLK ((uint32_t)0x00000001) /*!< SETUP packet count */
+#define USB_OTG_PCGCCTL_GATECLK ((uint32_t)0x00000002) /*!<Bit 0 */
+#define USB_OTG_PCGCCTL_PHYSUSP ((uint32_t)0x00000010) /*!<Bit 1 */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_macros
+ * @{
+ */
+
+/******************************* ADC Instances ********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
+
+/******************************* CRC Instances ********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+/******************************** DMA Instances *******************************/
+#define IS_DMA_STREAM_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Stream0) || \
+ ((INSTANCE) == DMA1_Stream1) || \
+ ((INSTANCE) == DMA1_Stream2) || \
+ ((INSTANCE) == DMA1_Stream3) || \
+ ((INSTANCE) == DMA1_Stream4) || \
+ ((INSTANCE) == DMA1_Stream5) || \
+ ((INSTANCE) == DMA1_Stream6) || \
+ ((INSTANCE) == DMA1_Stream7) || \
+ ((INSTANCE) == DMA2_Stream0) || \
+ ((INSTANCE) == DMA2_Stream1) || \
+ ((INSTANCE) == DMA2_Stream2) || \
+ ((INSTANCE) == DMA2_Stream3) || \
+ ((INSTANCE) == DMA2_Stream4) || \
+ ((INSTANCE) == DMA2_Stream5) || \
+ ((INSTANCE) == DMA2_Stream6) || \
+ ((INSTANCE) == DMA2_Stream7))
+
+/******************************* GPIO Instances *******************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOE) || \
+ ((INSTANCE) == GPIOH))
+
+/******************************** I2C Instances *******************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
+ ((INSTANCE) == I2C2) || \
+ ((INSTANCE) == I2C3))
+
+/******************************** I2S Instances *******************************/
+#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3) || \
+ ((INSTANCE) == SPI4) || \
+ ((INSTANCE) == SPI5))
+
+/*************************** I2S Extended Instances ***************************/
+#define IS_I2S_ALL_INSTANCE_EXT(PERIPH) (((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3) || \
+ ((INSTANCE) == I2S2ext) || \
+ ((INSTANCE) == I2S3ext))
+
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
+
+/******************************** SPI Instances *******************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3) || \
+ ((INSTANCE) == SPI4) || \
+ ((INSTANCE) == SPI5))
+/*************************** SPI Extended Instances ***************************/
+#define IS_SPI_ALL_INSTANCE_EXT(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3) || \
+ ((INSTANCE) == SPI4) || \
+ ((INSTANCE) == SPI5) || \
+ ((INSTANCE) == I2S2ext) || \
+ ((INSTANCE) == I2S3ext))
+
+/****************** TIM Instances : All supported instances *******************/
+#define IS_TIM_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9) || \
+ ((INSTANCE) == TIM10) || \
+ ((INSTANCE) == TIM11))
+
+/************* TIM Instances : at least 1 capture/compare channel *************/
+#define IS_TIM_CC1_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9) || \
+ ((INSTANCE) == TIM10) || \
+ ((INSTANCE) == TIM11))
+
+/************ TIM Instances : at least 2 capture/compare channels *************/
+#define IS_TIM_CC2_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9))
+
+/************ TIM Instances : at least 3 capture/compare channels *************/
+#define IS_TIM_CC3_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/************ TIM Instances : at least 4 capture/compare channels *************/
+#define IS_TIM_CC4_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/******************** TIM Instances : Advanced-control timers *****************/
+#define IS_TIM_ADVANCED_INSTANCE(INSTANCE) ((INSTANCE) == TIM1)
+
+/******************* TIM Instances : Timer input XOR function *****************/
+#define IS_TIM_XOR_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/****************** TIM Instances : DMA requests generation (UDE) *************/
+#define IS_TIM_DMA_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/************ TIM Instances : DMA requests generation (CCxDE) *****************/
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/************ TIM Instances : DMA requests generation (COMDE) *****************/
+#define IS_TIM_CCDMA_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/******************** TIM Instances : DMA burst feature ***********************/
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/****** TIM Instances : master mode available (TIMx_CR2.MMS available )********/
+#define IS_TIM_MASTER_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9))
+
+/*********** TIM Instances : Slave mode available (TIMx_SMCR available )*******/
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9))
+
+/********************** TIM Instances : 32 bit Counter ************************/
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE)(((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM5))
+
+/***************** TIM Instances : external trigger input availabe ************/
+#define IS_TIM_ETR_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/****************** TIM Instances : remapping capability **********************/
+#define IS_TIM_REMAP_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM11))
+
+/******************* TIM Instances : output(s) available **********************/
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM2) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM3) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM4) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM5) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM9) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))) \
+ || \
+ (((INSTANCE) == TIM10) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM11) && \
+ (((CHANNEL) == TIM_CHANNEL_1))))
+
+/************ TIM Instances : complementary output(s) available ***************/
+#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))))
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/********************* UART Instances : Smard card mode ***********************/
+#define IS_SMARTCARD_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/*********************** UART Instances : IRDA mode ***************************/
+#define IS_IRDA_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+
+/****************************** SDIO Instances ********************************/
+#define IS_SDIO_ALL_INSTANCE(INSTANCE) ((INSTANCE) == SDIO)
+
+/****************************** USB Exported Constants ************************/
+#define USB_OTG_FS_HOST_MAX_CHANNEL_NBR 8
+#define USB_OTG_FS_MAX_IN_ENDPOINTS 4 /* Including EP0 */
+#define USB_OTG_FS_MAX_OUT_ENDPOINTS 4 /* Including EP0 */
+#define USB_OTG_FS_TOTAL_FIFO_SIZE 1280 /* in Bytes */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F411xE_H */
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,232 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx.h
+ * @author MCD Application Team
+ * @version V2.3.0
+ * @date 02-March-2015
+ * @brief CMSIS STM32F4xx Device Peripheral Access Layer Header File.
+ *
+ * The file is the unique include file that the application programmer
+ * is using in the C source code, usually in main.c. This file contains:
+ * - Configuration section that allows to select:
+ * - The STM32F4xx device used in the target application
+ * - To use or not the peripherals drivers in application code(i.e.
+ * code will be based on direct access to peripherals registers
+ * rather than drivers API), this option is controlled by
+ * "#define USE_HAL_DRIVER"
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f4xx
+ * @{
+ */
+
+#ifndef __STM32F4xx_H
+#define __STM32F4xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/**
+ * @brief STM32 Family
+ */
+#if !defined (STM32F4)
+#define STM32F4
+#endif /* STM32F4 */
+
+/* Uncomment the line below according to the target STM32 device used in your
+ application
+ */
+#if !defined (STM32F405xx) && !defined (STM32F415xx) && !defined (STM32F407xx) && !defined (STM32F417xx) && \
+ !defined (STM32F427xx) && !defined (STM32F437xx) && !defined (STM32F429xx) && !defined (STM32F439xx) && \
+ !defined (STM32F401xC) && !defined (STM32F401xE) && !defined (STM32F411xE) && !defined (STM32F446xx)
+ /* #define STM32F405xx */ /*!< STM32F405RG, STM32F405VG and STM32F405ZG Devices */
+ /* #define STM32F415xx */ /*!< STM32F415RG, STM32F415VG and STM32F415ZG Devices */
+ /* #define STM32F407xx */ /*!< STM32F407VG, STM32F407VE, STM32F407ZG, STM32F407ZE, STM32F407IG and STM32F407IE Devices */
+ /* #define STM32F417xx */ /*!< STM32F417VG, STM32F417VE, STM32F417ZG, STM32F417ZE, STM32F417IG and STM32F417IE Devices */
+ /* #define STM32F427xx */ /*!< STM32F427VG, STM32F427VI, STM32F427ZG, STM32F427ZI, STM32F427IG and STM32F427II Devices */
+ /* #define STM32F437xx */ /*!< STM32F437VG, STM32F437VI, STM32F437ZG, STM32F437ZI, STM32F437IG and STM32F437II Devices */
+ /* #define STM32F429xx */ /*!< STM32F429VG, STM32F429VI, STM32F429ZG, STM32F429ZI, STM32F429BG, STM32F429BI, STM32F429NG,
+ STM32F439NI, STM32F429IG and STM32F429II Devices */
+ /* #define STM32F439xx */ /*!< STM32F439VG, STM32F439VI, STM32F439ZG, STM32F439ZI, STM32F439BG, STM32F439BI, STM32F439NG,
+ STM32F439NI, STM32F439IG and STM32F439II Devices */
+ /* #define STM32F401xC */ /*!< STM32F401CB, STM32F401CC, STM32F401RB, STM32F401RC, STM32F401VB and STM32F401VC Devices */
+ /* #define STM32F401xE */ /*!< STM32F401CD, STM32F401RD, STM32F401VD, STM32F401CE, STM32F401RE and STM32F401VE Devices */
+ #define STM32F411xE /*!< STM32F411CD, STM32F411RD, STM32F411VD, STM32F411CE, STM32F411RE and STM32F411VE Devices */
+ /* #define STM32F446xx */ /*!< STM32F446MC, STM32F446ME, STM32F446RC, STM32F446RE, STM32F446VC, STM32F446VE, STM32F446ZC,
+ and STM32F446ZE Devices */
+#endif
+
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+ */
+#if !defined (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+ #define USE_HAL_DRIVER
+#endif /* USE_HAL_DRIVER */
+
+/**
+ * @brief CMSIS Device version number V2.3.0
+ */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION_SUB1 (0x03) /*!< [23:16] sub1 version */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION ((__STM32F4xx_CMSIS_DEVICE_VERSION_MAIN << 24)\
+ |(__STM32F4xx_CMSIS_DEVICE_VERSION_SUB1 << 16)\
+ |(__STM32F4xx_CMSIS_DEVICE_VERSION_SUB2 << 8 )\
+ |(__STM32F4xx_CMSIS_DEVICE_VERSION))
+
+/**
+ * @}
+ */
+
+/** @addtogroup Device_Included
+ * @{
+ */
+
+#if defined(STM32F405xx)
+ #include "stm32f405xx.h"
+#elif defined(STM32F415xx)
+ #include "stm32f415xx.h"
+#elif defined(STM32F407xx)
+ #include "stm32f407xx.h"
+#elif defined(STM32F417xx)
+ #include "stm32f417xx.h"
+#elif defined(STM32F427xx)
+ #include "stm32f427xx.h"
+#elif defined(STM32F437xx)
+ #include "stm32f437xx.h"
+#elif defined(STM32F429xx)
+ #include "stm32f429xx.h"
+#elif defined(STM32F439xx)
+ #include "stm32f439xx.h"
+#elif defined(STM32F401xC)
+ #include "stm32f401xc.h"
+#elif defined(STM32F401xE)
+ #include "stm32f401xe.h"
+#elif defined(STM32F411xE)
+ #include "stm32f411xe.h"
+#elif defined(STM32F446xx)
+ #include "stm32f446xx.h"
+#else
+ #error "Please select first the target STM32F4xx device used in your application (in stm32f4xx.h file)"
+#endif
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_types
+ * @{
+ */
+typedef enum
+{
+ RESET = 0,
+ SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+ DISABLE = 0,
+ ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+ ERROR = 0,
+ SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
+
+
+/**
+ * @}
+ */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f4xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F4xx_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,233 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief This file contains all the functions prototypes for the HAL
+ * module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_H
+#define __STM32F4xx_HAL_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_conf.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HAL
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup HAL_Exported_Macros HAL Exported Macros
+ * @{
+ */
+
+/** @brief Freeze/Unfreeze Peripherals in Debug mode
+ */
+#define __HAL_DBGMCU_FREEZE_TIM2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM3() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM4() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM4_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM5() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM5_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM6() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM7() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM12() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM12_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM13() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM13_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM14() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#define __HAL_DBGMCU_FREEZE_RTC() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_DBGMCU_FREEZE_WWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_DBGMCU_FREEZE_IWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_FREEZE_CAN1() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN1_STOP))
+#define __HAL_DBGMCU_FREEZE_CAN2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN2_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM1() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM8() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM8_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM9() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM9_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM10() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM10_STOP))
+#define __HAL_DBGMCU_FREEZE_TIM11() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM11_STOP))
+
+#define __HAL_DBGMCU_UNFREEZE_TIM2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM3() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM4() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM4_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM5() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM5_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM6() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM7() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM12() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM12_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM13() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM13_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM14() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#define __HAL_DBGMCU_UNFREEZE_RTC() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_DBGMCU_UNFREEZE_WWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_DBGMCU_UNFREEZE_IWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
+#define __HAL_DBGMCU_UNFREEZE_CAN1() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN1_STOP))
+#define __HAL_DBGMCU_UNFREEZE_CAN2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN2_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM1() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM8() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM8_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM9() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM9_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM10() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM10_STOP))
+#define __HAL_DBGMCU_UNFREEZE_TIM11() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM11_STOP))
+
+/** @brief Main Flash memory mapped at 0x00000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_FLASH() (SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE))
+
+/** @brief System Flash memory mapped at 0x00000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+ SYSCFG->MEMRMP |= SYSCFG_MEMRMP_MEM_MODE_0;\
+ }while(0);
+
+/** @brief Embedded SRAM mapped at 0x00000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_SRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+ SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_0 | SYSCFG_MEMRMP_MEM_MODE_1);\
+ }while(0);
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+/** @brief FSMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_FSMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+ SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\
+ }while(0);
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+/** @brief FMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_FMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+ SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\
+ }while(0);
+
+/** @brief FMC/SDRAM Bank 1 and 2 mapped at 0x00000000
+ */
+#define __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+ SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_2);\
+ }while(0);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HAL_Exported_Functions
+ * @{
+ */
+/** @addtogroup HAL_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions ******************************/
+HAL_StatusTypeDef HAL_Init(void);
+HAL_StatusTypeDef HAL_DeInit(void);
+void HAL_MspInit(void);
+void HAL_MspDeInit(void);
+HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);
+/**
+ * @}
+ */
+
+/** @addtogroup HAL_Exported_Functions_Group2
+ * @{
+ */
+/* Peripheral Control functions ************************************************/
+void HAL_IncTick(void);
+void HAL_Delay(__IO uint32_t Delay);
+uint32_t HAL_GetTick(void);
+void HAL_SuspendTick(void);
+void HAL_ResumeTick(void);
+uint32_t HAL_GetHalVersion(void);
+uint32_t HAL_GetREVID(void);
+uint32_t HAL_GetDEVID(void);
+void HAL_DBGMCU_EnableDBGSleepMode(void);
+void HAL_DBGMCU_DisableDBGSleepMode(void);
+void HAL_DBGMCU_EnableDBGStopMode(void);
+void HAL_DBGMCU_DisableDBGStopMode(void);
+void HAL_DBGMCU_EnableDBGStandbyMode(void);
+void HAL_DBGMCU_DisableDBGStandbyMode(void);
+void HAL_EnableCompensationCell(void);
+void HAL_DisableCompensationCell(void);
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+void HAL_EnableMemorySwappingBank(void);
+void HAL_DisableMemorySwappingBank(void);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup HAL_Private_Variables HAL Private Variables
+ * @{
+ */
+/**
+ * @}
+ */
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup HAL_Private_Constants HAL Private Constants
+ * @{
+ */
+/**
+ * @}
+ */
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_adc.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,762 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_adc.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of ADC HAL extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_ADC_H
+#define __STM32F4xx_ADC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup ADC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup ADC_Exported_Types ADC Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_ADC_STATE_RESET = 0x00, /*!< ADC not yet initialized or disabled */
+ HAL_ADC_STATE_READY = 0x01, /*!< ADC peripheral ready for use */
+ HAL_ADC_STATE_BUSY = 0x02, /*!< An internal process is ongoing */
+ HAL_ADC_STATE_BUSY_REG = 0x12, /*!< Regular conversion is ongoing */
+ HAL_ADC_STATE_BUSY_INJ = 0x22, /*!< Injected conversion is ongoing */
+ HAL_ADC_STATE_BUSY_INJ_REG = 0x32, /*!< Injected and regular conversion are ongoing */
+ HAL_ADC_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_ADC_STATE_ERROR = 0x04, /*!< ADC state error */
+ HAL_ADC_STATE_EOC = 0x05, /*!< Conversion is completed */
+ HAL_ADC_STATE_EOC_REG = 0x15, /*!< Regular conversion is completed */
+ HAL_ADC_STATE_EOC_INJ = 0x25, /*!< Injected conversion is completed */
+ HAL_ADC_STATE_EOC_INJ_REG = 0x35, /*!< Injected and regular conversion are completed */
+ HAL_ADC_STATE_AWD = 0x06 /*!< ADC state analog watchdog */
+
+}HAL_ADC_StateTypeDef;
+
+/**
+ * @brief ADC Init structure definition
+ */
+typedef struct
+{
+ uint32_t ClockPrescaler; /*!< Select the frequency of the clock to the ADC. The clock is common for
+ all the ADCs.
+ This parameter can be a value of @ref ADC_ClockPrescaler */
+ uint32_t Resolution; /*!< Configures the ADC resolution dual mode.
+ This parameter can be a value of @ref ADC_Resolution */
+ uint32_t DataAlign; /*!< Specifies whether the ADC data alignment is left or right.
+ This parameter can be a value of @ref ADC_data_align */
+ uint32_t ScanConvMode; /*!< Specifies whether the conversion is performed in Scan (multi channels) or
+ Single (one channel) mode.
+ This parameter can be set to ENABLE or DISABLE */
+ uint32_t EOCSelection; /*!< Specifies whether the EOC flag is set
+ at the end of single channel conversion or at the end of all conversions.
+ This parameter can be a value of @ref ADC_EOCSelection */
+ uint32_t ContinuousConvMode; /*!< Specifies whether the conversion is performed in Continuous or Single mode.
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t DMAContinuousRequests; /*!< Specifies whether the DMA requests is performed in Continuous or in Single mode.
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t NbrOfConversion; /*!< Specifies the number of ADC conversions that will be done using the sequencer for
+ regular channel group.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 16. */
+ uint32_t DiscontinuousConvMode; /*!< Specifies whether the conversion is performed in Discontinuous or not
+ for regular channels.
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t NbrOfDiscConversion; /*!< Specifies the number of ADC discontinuous conversions that will be done
+ using the sequencer for regular channel group.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 8. */
+ uint32_t ExternalTrigConv; /*!< Selects the external event used to trigger the conversion start of regular group.
+ If set to ADC_SOFTWARE_START, external triggers are disabled.
+ This parameter can be a value of @ref ADC_External_trigger_Source_Regular
+ Note: This parameter can be modified only if there is no conversion is ongoing. */
+ uint32_t ExternalTrigConvEdge; /*!< Selects the external trigger edge of regular group.
+ If trigger is set to ADC_SOFTWARE_START, this parameter is discarded.
+ This parameter can be a value of @ref ADC_External_trigger_edge_Regular
+ Note: This parameter can be modified only if there is no conversion is ongoing. */
+}ADC_InitTypeDef;
+
+/**
+ * @brief ADC handle Structure definition
+ */
+typedef struct
+{
+ ADC_TypeDef *Instance; /*!< Register base address */
+
+ ADC_InitTypeDef Init; /*!< ADC required parameters */
+
+ __IO uint32_t NbrOfCurrentConversionRank; /*!< ADC number of current conversion rank */
+
+ DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */
+
+ HAL_LockTypeDef Lock; /*!< ADC locking object */
+
+ __IO HAL_ADC_StateTypeDef State; /*!< ADC communication state */
+
+ __IO uint32_t ErrorCode; /*!< ADC Error code */
+}ADC_HandleTypeDef;
+
+/**
+ * @brief ADC Configuration regular Channel structure definition
+ */
+typedef struct
+{
+ uint32_t Channel; /*!< The ADC channel to configure.
+ This parameter can be a value of @ref ADC_channels */
+ uint32_t Rank; /*!< The rank in the regular group sequencer.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 16 */
+ uint32_t SamplingTime; /*!< The sample time value to be set for the selected channel.
+ This parameter can be a value of @ref ADC_sampling_times */
+ uint32_t Offset; /*!< Reserved for future use, can be set to 0 */
+}ADC_ChannelConfTypeDef;
+
+/**
+ * @brief ADC Configuration multi-mode structure definition
+ */
+typedef struct
+{
+ uint32_t WatchdogMode; /*!< Configures the ADC analog watchdog mode.
+ This parameter can be a value of @ref ADC_analog_watchdog_selection */
+ uint32_t HighThreshold; /*!< Configures the ADC analog watchdog High threshold value.
+ This parameter must be a 12-bit value. */
+ uint32_t LowThreshold; /*!< Configures the ADC analog watchdog High threshold value.
+ This parameter must be a 12-bit value. */
+ uint32_t Channel; /*!< Configures ADC channel for the analog watchdog.
+ This parameter has an effect only if watchdog mode is configured on single channel
+ This parameter can be a value of @ref ADC_channels */
+ uint32_t ITMode; /*!< Specifies whether the analog watchdog is configured
+ is interrupt mode or in polling mode.
+ This parameter can be set to ENABLE or DISABLE */
+ uint32_t WatchdogNumber; /*!< Reserved for future use, can be set to 0 */
+}ADC_AnalogWDGConfTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup ADC_Exported_Constants ADC Exported Constants
+ * @{
+ */
+
+/** @defgroup ADC_Error_Code ADC Error Code
+ * @{
+ */
+#define HAL_ADC_ERROR_NONE ((uint32_t)0x00) /*!< No error */
+#define HAL_ADC_ERROR_OVR ((uint32_t)0x01) /*!< OVR error */
+#define HAL_ADC_ERROR_DMA ((uint32_t)0x02) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
+
+/** @defgroup ADC_ClockPrescaler ADC Clock Prescaler
+ * @{
+ */
+#define ADC_CLOCKPRESCALER_PCLK_DIV2 ((uint32_t)0x00000000)
+#define ADC_CLOCKPRESCALER_PCLK_DIV4 ((uint32_t)ADC_CCR_ADCPRE_0)
+#define ADC_CLOCKPRESCALER_PCLK_DIV6 ((uint32_t)ADC_CCR_ADCPRE_1)
+#define ADC_CLOCKPRESCALER_PCLK_DIV8 ((uint32_t)ADC_CCR_ADCPRE)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_delay_between_2_sampling_phases ADC Delay Between 2 Sampling Phases
+ * @{
+ */
+#define ADC_TWOSAMPLINGDELAY_5CYCLES ((uint32_t)0x00000000)
+#define ADC_TWOSAMPLINGDELAY_6CYCLES ((uint32_t)ADC_CCR_DELAY_0)
+#define ADC_TWOSAMPLINGDELAY_7CYCLES ((uint32_t)ADC_CCR_DELAY_1)
+#define ADC_TWOSAMPLINGDELAY_8CYCLES ((uint32_t)(ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_9CYCLES ((uint32_t)ADC_CCR_DELAY_2)
+#define ADC_TWOSAMPLINGDELAY_10CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_11CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1))
+#define ADC_TWOSAMPLINGDELAY_12CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_13CYCLES ((uint32_t)ADC_CCR_DELAY_3)
+#define ADC_TWOSAMPLINGDELAY_14CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_15CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1))
+#define ADC_TWOSAMPLINGDELAY_16CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_17CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2))
+#define ADC_TWOSAMPLINGDELAY_18CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_19CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1))
+#define ADC_TWOSAMPLINGDELAY_20CYCLES ((uint32_t)ADC_CCR_DELAY)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Resolution ADC Resolution
+ * @{
+ */
+#define ADC_RESOLUTION_12B ((uint32_t)0x00000000)
+#define ADC_RESOLUTION_10B ((uint32_t)ADC_CR1_RES_0)
+#define ADC_RESOLUTION_8B ((uint32_t)ADC_CR1_RES_1)
+#define ADC_RESOLUTION_6B ((uint32_t)ADC_CR1_RES)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_External_trigger_edge_Regular ADC External Trigger Edge Regular
+ * @{
+ */
+#define ADC_EXTERNALTRIGCONVEDGE_NONE ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGCONVEDGE_RISING ((uint32_t)ADC_CR2_EXTEN_0)
+#define ADC_EXTERNALTRIGCONVEDGE_FALLING ((uint32_t)ADC_CR2_EXTEN_1)
+#define ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING ((uint32_t)ADC_CR2_EXTEN)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_External_trigger_Source_Regular ADC External Trigger Source Regular
+ * @{
+ */
+/* Note: Parameter ADC_SOFTWARE_START is a software parameter used for */
+/* compatibility with other STM32 devices. */
+#define ADC_EXTERNALTRIGCONV_T1_CC1 ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGCONV_T1_CC2 ((uint32_t)ADC_CR2_EXTSEL_0)
+#define ADC_EXTERNALTRIGCONV_T1_CC3 ((uint32_t)ADC_CR2_EXTSEL_1)
+#define ADC_EXTERNALTRIGCONV_T2_CC2 ((uint32_t)(ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T2_CC3 ((uint32_t)ADC_CR2_EXTSEL_2)
+#define ADC_EXTERNALTRIGCONV_T2_CC4 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T2_TRGO ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1))
+#define ADC_EXTERNALTRIGCONV_T3_CC1 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T3_TRGO ((uint32_t)ADC_CR2_EXTSEL_3)
+#define ADC_EXTERNALTRIGCONV_T4_CC4 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T5_CC1 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1))
+#define ADC_EXTERNALTRIGCONV_T5_CC2 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T5_CC3 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2))
+#define ADC_EXTERNALTRIGCONV_T8_CC1 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T8_TRGO ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1))
+#define ADC_EXTERNALTRIGCONV_Ext_IT11 ((uint32_t)ADC_CR2_EXTSEL)
+#define ADC_SOFTWARE_START ((uint32_t)ADC_CR2_EXTSEL + 1)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_data_align ADC Data Align
+ * @{
+ */
+#define ADC_DATAALIGN_RIGHT ((uint32_t)0x00000000)
+#define ADC_DATAALIGN_LEFT ((uint32_t)ADC_CR2_ALIGN)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_channels ADC Common Channels
+ * @{
+ */
+#define ADC_CHANNEL_0 ((uint32_t)0x00000000)
+#define ADC_CHANNEL_1 ((uint32_t)ADC_CR1_AWDCH_0)
+#define ADC_CHANNEL_2 ((uint32_t)ADC_CR1_AWDCH_1)
+#define ADC_CHANNEL_3 ((uint32_t)(ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_4 ((uint32_t)ADC_CR1_AWDCH_2)
+#define ADC_CHANNEL_5 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_6 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1))
+#define ADC_CHANNEL_7 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_8 ((uint32_t)ADC_CR1_AWDCH_3)
+#define ADC_CHANNEL_9 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_10 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1))
+#define ADC_CHANNEL_11 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_12 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2))
+#define ADC_CHANNEL_13 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_14 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1))
+#define ADC_CHANNEL_15 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_16 ((uint32_t)ADC_CR1_AWDCH_4)
+#define ADC_CHANNEL_17 ((uint32_t)(ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_18 ((uint32_t)(ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_1))
+
+#define ADC_CHANNEL_VREFINT ((uint32_t)ADC_CHANNEL_17)
+#define ADC_CHANNEL_VBAT ((uint32_t)ADC_CHANNEL_18)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_sampling_times ADC Sampling Times
+ * @{
+ */
+#define ADC_SAMPLETIME_3CYCLES ((uint32_t)0x00000000)
+#define ADC_SAMPLETIME_15CYCLES ((uint32_t)ADC_SMPR1_SMP10_0)
+#define ADC_SAMPLETIME_28CYCLES ((uint32_t)ADC_SMPR1_SMP10_1)
+#define ADC_SAMPLETIME_56CYCLES ((uint32_t)(ADC_SMPR1_SMP10_1 | ADC_SMPR1_SMP10_0))
+#define ADC_SAMPLETIME_84CYCLES ((uint32_t)ADC_SMPR1_SMP10_2)
+#define ADC_SAMPLETIME_112CYCLES ((uint32_t)(ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_0))
+#define ADC_SAMPLETIME_144CYCLES ((uint32_t)(ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_1))
+#define ADC_SAMPLETIME_480CYCLES ((uint32_t)ADC_SMPR1_SMP10)
+/**
+ * @}
+ */
+
+ /** @defgroup ADC_EOCSelection ADC EOC Selection
+ * @{
+ */
+#define ADC_EOC_SEQ_CONV ((uint32_t)0x00000000)
+#define ADC_EOC_SINGLE_CONV ((uint32_t)0x00000001)
+#define ADC_EOC_SINGLE_SEQ_CONV ((uint32_t)0x00000002) /*!< reserved for future use */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Event_type ADC Event Type
+ * @{
+ */
+#define ADC_AWD_EVENT ((uint32_t)ADC_FLAG_AWD)
+#define ADC_OVR_EVENT ((uint32_t)ADC_FLAG_OVR)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_analog_watchdog_selection ADC Analog Watchdog Selection
+ * @{
+ */
+#define ADC_ANALOGWATCHDOG_SINGLE_REG ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN))
+#define ADC_ANALOGWATCHDOG_SINGLE_INJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_JAWDEN))
+#define ADC_ANALOGWATCHDOG_SINGLE_REGINJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN | ADC_CR1_JAWDEN))
+#define ADC_ANALOGWATCHDOG_ALL_REG ((uint32_t)ADC_CR1_AWDEN)
+#define ADC_ANALOGWATCHDOG_ALL_INJEC ((uint32_t)ADC_CR1_JAWDEN)
+#define ADC_ANALOGWATCHDOG_ALL_REGINJEC ((uint32_t)(ADC_CR1_AWDEN | ADC_CR1_JAWDEN))
+#define ADC_ANALOGWATCHDOG_NONE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_interrupts_definition ADC Interrupts Definition
+ * @{
+ */
+#define ADC_IT_EOC ((uint32_t)ADC_CR1_EOCIE)
+#define ADC_IT_AWD ((uint32_t)ADC_CR1_AWDIE)
+#define ADC_IT_JEOC ((uint32_t)ADC_CR1_JEOCIE)
+#define ADC_IT_OVR ((uint32_t)ADC_CR1_OVRIE)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_flags_definition ADC Flags Definition
+ * @{
+ */
+#define ADC_FLAG_AWD ((uint32_t)ADC_SR_AWD)
+#define ADC_FLAG_EOC ((uint32_t)ADC_SR_EOC)
+#define ADC_FLAG_JEOC ((uint32_t)ADC_SR_JEOC)
+#define ADC_FLAG_JSTRT ((uint32_t)ADC_SR_JSTRT)
+#define ADC_FLAG_STRT ((uint32_t)ADC_SR_STRT)
+#define ADC_FLAG_OVR ((uint32_t)ADC_SR_OVR)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_channels_type ADC Channels Type
+ * @{
+ */
+#define ADC_ALL_CHANNELS ((uint32_t)0x00000001)
+#define ADC_REGULAR_CHANNELS ((uint32_t)0x00000002) /*!< reserved for future use */
+#define ADC_INJECTED_CHANNELS ((uint32_t)0x00000003) /*!< reserved for future use */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup ADC_Exported_Macros ADC Exported Macros
+ * @{
+ */
+
+/** @brief Reset ADC handle state
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_ADC_STATE_RESET)
+
+/**
+ * @brief Enable the ADC peripheral.
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR2 |= ADC_CR2_ADON)
+
+/**
+ * @brief Disable the ADC peripheral.
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= ~ADC_CR2_ADON)
+
+/**
+ * @brief Enable the ADC end of conversion interrupt.
+ * @param __HANDLE__: specifies the ADC Handle.
+ * @param __INTERRUPT__: ADC Interrupt.
+ * @retval None
+ */
+#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the ADC end of conversion interrupt.
+ * @param __HANDLE__: specifies the ADC Handle.
+ * @param __INTERRUPT__: ADC interrupt.
+ * @retval None
+ */
+#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) &= ~(__INTERRUPT__))
+
+/** @brief Check if the specified ADC interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the ADC Handle.
+ * @param __INTERRUPT__: specifies the ADC interrupt source to check.
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+ * @brief Clear the ADC's pending flags.
+ * @param __HANDLE__: specifies the ADC Handle.
+ * @param __FLAG__: ADC flag.
+ * @retval None
+ */
+#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__))
+
+/**
+ * @brief Get the selected ADC's flag status.
+ * @param __HANDLE__: specifies the ADC Handle.
+ * @param __FLAG__: ADC flag.
+ * @retval None
+ */
+#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @}
+ */
+
+/* Include ADC HAL Extension module */
+#include "stm32f4xx_hal_adc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup ADC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup ADC_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions ***********************************/
+HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc);
+void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc);
+void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc);
+/**
+ * @}
+ */
+
+/** @addtogroup ADC_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
+
+HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout);
+
+HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc);
+
+void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc);
+
+HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);
+HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc);
+
+uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc);
+
+void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc);
+/**
+ * @}
+ */
+
+/** @addtogroup ADC_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control functions *************************************************/
+HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig);
+HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig);
+/**
+ * @}
+ */
+
+/** @addtogroup ADC_Exported_Functions_Group4
+ * @{
+ */
+/* Peripheral State functions ***************************************************/
+HAL_ADC_StateTypeDef HAL_ADC_GetState(ADC_HandleTypeDef* hadc);
+uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup ADC_Private_Constants ADC Private Constants
+ * @{
+ */
+/* Delay for ADC stabilization time. */
+/* Maximum delay is 1us (refer to device datasheet, parameter tSTAB). */
+/* Unit: us */
+#define ADC_STAB_DELAY_US ((uint32_t) 3)
+/* Delay for temperature sensor stabilization time. */
+/* Maximum delay is 10us (refer to device datasheet, parameter tSTART). */
+/* Unit: us */
+#define ADC_TEMPSENSOR_DELAY_US ((uint32_t) 10)
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup ADC_Private_Macros ADC Private Macros
+ * @{
+ */
+#define IS_ADC_CLOCKPRESCALER(ADC_CLOCK) (((ADC_CLOCK) == ADC_CLOCKPRESCALER_PCLK_DIV2) || \
+ ((ADC_CLOCK) == ADC_CLOCKPRESCALER_PCLK_DIV4) || \
+ ((ADC_CLOCK) == ADC_CLOCKPRESCALER_PCLK_DIV6) || \
+ ((ADC_CLOCK) == ADC_CLOCKPRESCALER_PCLK_DIV8))
+#define IS_ADC_SAMPLING_DELAY(DELAY) (((DELAY) == ADC_TWOSAMPLINGDELAY_5CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_6CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_7CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_8CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_9CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_10CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_11CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_12CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_13CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_14CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_15CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_16CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_17CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_18CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_19CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_20CYCLES))
+#define IS_ADC_RESOLUTION(RESOLUTION) (((RESOLUTION) == ADC_RESOLUTION_12B) || \
+ ((RESOLUTION) == ADC_RESOLUTION_10B) || \
+ ((RESOLUTION) == ADC_RESOLUTION_8B) || \
+ ((RESOLUTION) == ADC_RESOLUTION_6B))
+#define IS_ADC_EXT_TRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGCONVEDGE_NONE) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISING) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_FALLING) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING))
+#define IS_ADC_EXT_TRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_Ext_IT11)|| \
+ ((REGTRIG) == ADC_SOFTWARE_START))
+#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DATAALIGN_RIGHT) || \
+ ((ALIGN) == ADC_DATAALIGN_LEFT))
+#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SAMPLETIME_3CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_15CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_28CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_56CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_84CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_112CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_144CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_480CYCLES))
+#define IS_ADC_EOCSelection(EOCSelection) (((EOCSelection) == ADC_EOC_SINGLE_CONV) || \
+ ((EOCSelection) == ADC_EOC_SEQ_CONV) || \
+ ((EOCSelection) == ADC_EOC_SINGLE_SEQ_CONV))
+#define IS_ADC_EVENT_TYPE(EVENT) (((EVENT) == ADC_AWD_EVENT) || \
+ ((EVENT) == ADC_OVR_EVENT))
+#define IS_ADC_ANALOG_WATCHDOG(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_INJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REG) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_INJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REGINJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_NONE))
+#define IS_ADC_CHANNELS_TYPE(CHANNEL_TYPE) (((CHANNEL_TYPE) == ADC_ALL_CHANNELS) || \
+ ((CHANNEL_TYPE) == ADC_REGULAR_CHANNELS) || \
+ ((CHANNEL_TYPE) == ADC_INJECTED_CHANNELS))
+#define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= ((uint32_t)0xFFF))
+
+#define IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= ((uint32_t)1)) && ((LENGTH) <= ((uint32_t)16)))
+#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= ((uint32_t)1)) && ((RANK) <= ((uint32_t)16)))
+#define IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= ((uint32_t)1)) && ((NUMBER) <= ((uint32_t)8)))
+#define IS_ADC_RANGE(RESOLUTION, ADC_VALUE) \
+ ((((RESOLUTION) == ADC_RESOLUTION_12B) && ((ADC_VALUE) <= ((uint32_t)0x0FFF))) || \
+ (((RESOLUTION) == ADC_RESOLUTION_10B) && ((ADC_VALUE) <= ((uint32_t)0x03FF))) || \
+ (((RESOLUTION) == ADC_RESOLUTION_8B) && ((ADC_VALUE) <= ((uint32_t)0x00FF))) || \
+ (((RESOLUTION) == ADC_RESOLUTION_6B) && ((ADC_VALUE) <= ((uint32_t)0x003F))))
+
+/**
+ * @brief Set ADC Regular channel sequence length.
+ * @param _NbrOfConversion_: Regular channel sequence length.
+ * @retval None
+ */
+#define ADC_SQR1(_NbrOfConversion_) (((_NbrOfConversion_) - (uint8_t)1) << 20)
+
+/**
+ * @brief Set the ADC's sample time for channel numbers between 10 and 18.
+ * @param _SAMPLETIME_: Sample time parameter.
+ * @param _CHANNELNB_: Channel number.
+ * @retval None
+ */
+#define ADC_SMPR1(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * (((uint32_t)((uint16_t)(_CHANNELNB_))) - 10)))
+
+/**
+ * @brief Set the ADC's sample time for channel numbers between 0 and 9.
+ * @param _SAMPLETIME_: Sample time parameter.
+ * @param _CHANNELNB_: Channel number.
+ * @retval None
+ */
+#define ADC_SMPR2(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * ((uint32_t)((uint16_t)(_CHANNELNB_)))))
+
+/**
+ * @brief Set the selected regular channel rank for rank between 1 and 6.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define ADC_SQR3_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5 * ((_RANKNB_) - 1)))
+
+/**
+ * @brief Set the selected regular channel rank for rank between 7 and 12.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define ADC_SQR2_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5 * ((_RANKNB_) - 7)))
+
+/**
+ * @brief Set the selected regular channel rank for rank between 13 and 16.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define ADC_SQR1_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5 * ((_RANKNB_) - 13)))
+
+/**
+ * @brief Enable ADC continuous conversion mode.
+ * @param _CONTINUOUS_MODE_: Continuous mode.
+ * @retval None
+ */
+#define ADC_CR2_CONTINUOUS(_CONTINUOUS_MODE_) ((_CONTINUOUS_MODE_) << 1)
+
+/**
+ * @brief Configures the number of discontinuous conversions for the regular group channels.
+ * @param _NBR_DISCONTINUOUSCONV_: Number of discontinuous conversions.
+ * @retval None
+ */
+#define ADC_CR1_DISCONTINUOUS(_NBR_DISCONTINUOUSCONV_) (((_NBR_DISCONTINUOUSCONV_) - 1) << POSITION_VAL(ADC_CR1_DISCNUM))
+
+/**
+ * @brief Enable ADC scan mode.
+ * @param _SCANCONV_MODE_: Scan conversion mode.
+ * @retval None
+ */
+#define ADC_CR1_SCANCONV(_SCANCONV_MODE_) ((_SCANCONV_MODE_) << 8)
+
+/**
+ * @brief Enable the ADC end of conversion selection.
+ * @param _EOCSelection_MODE_: End of conversion selection mode.
+ * @retval None
+ */
+#define ADC_CR2_EOCSelection(_EOCSelection_MODE_) ((_EOCSelection_MODE_) << 10)
+
+/**
+ * @brief Enable the ADC DMA continuous request.
+ * @param _DMAContReq_MODE_: DMA continuous request mode.
+ * @retval None
+ */
+#define ADC_CR2_DMAContReq(_DMAContReq_MODE_) ((_DMAContReq_MODE_) << 9)
+
+/**
+ * @brief Return resolution bits in CR1 register.
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define ADC_GET_RESOLUTION(__HANDLE__) (((__HANDLE__)->Instance->CR1) & ADC_CR1_RES)
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup ADC_Private_Functions ADC Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_ADC_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_adc_ex.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,350 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_adc_ex.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of ADC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_ADC_EX_H
+#define __STM32F4xx_ADC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup ADCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup ADCEx_Exported_Types ADC Exported Types
+ * @{
+ */
+
+/**
+ * @brief ADC Configuration injected Channel structure definition
+ */
+typedef struct
+{
+ uint32_t InjectedChannel; /*!< Configure the ADC injected channel.
+ This parameter can be a value of @ref ADC_channels */
+ uint32_t InjectedRank; /*!< The rank in the injected group sequencer
+ This parameter must be a number between Min_Data = 1 and Max_Data = 4. */
+ uint32_t InjectedSamplingTime; /*!< The sample time value to be set for the selected channel.
+ This parameter can be a value of @ref ADC_sampling_times */
+ uint32_t InjectedOffset; /*!< Defines the offset to be subtracted from the raw converted data when convert injected channels.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+ uint32_t InjectedNbrOfConversion; /*!< Specifies the number of ADC conversions that will be done using the sequencer for
+ injected channel group.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 4. */
+ uint32_t AutoInjectedConv; /*!< Enables or disables the selected ADC automatic injected group
+ conversion after regular one */
+ uint32_t InjectedDiscontinuousConvMode; /*!< Specifies whether the conversion is performed in Discontinuous mode or not for injected channels.
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t ExternalTrigInjecConvEdge; /*!< Select the external trigger edge and enable the trigger of an injected channels.
+ This parameter can be a value of @ref ADCEx_External_trigger_edge_Injected */
+ uint32_t ExternalTrigInjecConv; /*!< Select the external event used to trigger the start of conversion of a injected channels.
+ This parameter can be a value of @ref ADCEx_External_trigger_Source_Injected */
+}ADC_InjectionConfTypeDef;
+
+/**
+ * @brief ADC Configuration multi-mode structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Configures the ADC to operate in independent or multi mode.
+ This parameter can be a value of @ref ADCEx_Common_mode */
+ uint32_t DMAAccessMode; /*!< Configures the Direct memory access mode for multi ADC mode.
+ This parameter can be a value of @ref ADCEx_Direct_memory_access_mode_for_multi_mode */
+ uint32_t TwoSamplingDelay; /*!< Configures the Delay between 2 sampling phases.
+ This parameter can be a value of @ref ADC_delay_between_2_sampling_phases */
+}ADC_MultiModeTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup ADCEx_Exported_Constants ADC Exported Constants
+ * @{
+ */
+
+/** @defgroup ADCEx_Common_mode ADC Common Mode
+ * @{
+ */
+#define ADC_MODE_INDEPENDENT ((uint32_t)0x00000000)
+#define ADC_DUALMODE_REGSIMULT_INJECSIMULT ((uint32_t)ADC_CCR_MULTI_0)
+#define ADC_DUALMODE_REGSIMULT_ALTERTRIG ((uint32_t)ADC_CCR_MULTI_1)
+#define ADC_DUALMODE_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0))
+#define ADC_DUALMODE_REGSIMULT ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1))
+#define ADC_DUALMODE_INTERL ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0))
+#define ADC_DUALMODE_ALTERTRIG ((uint32_t)(ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_REGSIMULT_AlterTrig ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_1))
+#define ADC_TRIPLEMODE_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_REGSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1))
+#define ADC_TRIPLEMODE_INTERL ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_ALTERTRIG ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0))
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_Direct_memory_access_mode_for_multi_mode ADC Direct Memory Access Mode For Multi Mode
+ * @{
+ */
+#define ADC_DMAACCESSMODE_DISABLED ((uint32_t)0x00000000) /*!< DMA mode disabled */
+#define ADC_DMAACCESSMODE_1 ((uint32_t)ADC_CCR_DMA_0) /*!< DMA mode 1 enabled (2 / 3 half-words one by one - 1 then 2 then 3)*/
+#define ADC_DMAACCESSMODE_2 ((uint32_t)ADC_CCR_DMA_1) /*!< DMA mode 2 enabled (2 / 3 half-words by pairs - 2&1 then 1&3 then 3&2)*/
+#define ADC_DMAACCESSMODE_3 ((uint32_t)ADC_CCR_DMA) /*!< DMA mode 3 enabled (2 / 3 bytes by pairs - 2&1 then 1&3 then 3&2) */
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_edge_Injected ADC External Trigger Edge Injected
+ * @{
+ */
+#define ADC_EXTERNALTRIGINJECCONVEDGE_NONE ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGINJECCONVEDGE_RISING ((uint32_t)ADC_CR2_JEXTEN_0)
+#define ADC_EXTERNALTRIGINJECCONVEDGE_FALLING ((uint32_t)ADC_CR2_JEXTEN_1)
+#define ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING ((uint32_t)ADC_CR2_JEXTEN)
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_Source_Injected ADC External Trigger Source Injected
+ * @{
+ */
+#define ADC_EXTERNALTRIGINJECCONV_T1_CC4 ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO ((uint32_t)ADC_CR2_JEXTSEL_0)
+#define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ((uint32_t)ADC_CR2_JEXTSEL_1)
+#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC2 ((uint32_t)ADC_CR2_JEXTSEL_2)
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC1 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1))
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC2 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC3 ((uint32_t)ADC_CR2_JEXTSEL_3)
+#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T5_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1))
+#define ADC_EXTERNALTRIGINJECCONV_T5_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC2 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2))
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC3 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1))
+#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ((uint32_t)ADC_CR2_JEXTSEL)
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_injected_channel_selection ADC Injected Channel Selection
+ * @{
+ */
+#define ADC_INJECTED_RANK_1 ((uint32_t)0x00000001)
+#define ADC_INJECTED_RANK_2 ((uint32_t)0x00000002)
+#define ADC_INJECTED_RANK_3 ((uint32_t)0x00000003)
+#define ADC_INJECTED_RANK_4 ((uint32_t)0x00000004)
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_channels ADC Specific Channels
+ * @{
+ */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+#define ADC_CHANNEL_TEMPSENSOR ((uint32_t)ADC_CHANNEL_16)
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+#define ADC_CHANNEL_DIFFERENCIATION_TEMPSENSOR_VBAT ((uint32_t)0x10000000) /* Dummy bit for driver internal usage, not used in ADC channel setting registers CR1 or SQRx */
+#define ADC_CHANNEL_TEMPSENSOR ((uint32_t)ADC_CHANNEL_18 | ADC_CHANNEL_DIFFERENCIATION_TEMPSENSOR_VBAT)
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup ADC_Exported_Macros ADC Exported Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup ADCEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup ADCEx_Exported_Functions_Group1
+ * @{
+ */
+
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc);
+uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank);
+HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);
+HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef* hadc);
+uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef* hadc);
+void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc);
+
+/* Peripheral Control functions *************************************************/
+HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected);
+HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_MultiModeTypeDef* multimode);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup ADCEx_Private_Constants ADC Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup ADCEx_Private_Macros ADC Private Macros
+ * @{
+ */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+#define IS_ADC_CHANNEL(CHANNEL) ((CHANNEL) <= ADC_CHANNEL_18)
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) <= ADC_CHANNEL_18) || \
+ ((CHANNEL) == ADC_CHANNEL_TEMPSENSOR))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+#define IS_ADC_MODE(MODE) (((MODE) == ADC_MODE_INDEPENDENT) || \
+ ((MODE) == ADC_DUALMODE_REGSIMULT_INJECSIMULT) || \
+ ((MODE) == ADC_DUALMODE_REGSIMULT_ALTERTRIG) || \
+ ((MODE) == ADC_DUALMODE_INJECSIMULT) || \
+ ((MODE) == ADC_DUALMODE_REGSIMULT) || \
+ ((MODE) == ADC_DUALMODE_INTERL) || \
+ ((MODE) == ADC_DUALMODE_ALTERTRIG) || \
+ ((MODE) == ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT) || \
+ ((MODE) == ADC_TRIPLEMODE_REGSIMULT_AlterTrig) || \
+ ((MODE) == ADC_TRIPLEMODE_INJECSIMULT) || \
+ ((MODE) == ADC_TRIPLEMODE_REGSIMULT) || \
+ ((MODE) == ADC_TRIPLEMODE_INTERL) || \
+ ((MODE) == ADC_TRIPLEMODE_ALTERTRIG))
+#define IS_ADC_DMA_ACCESS_MODE(MODE) (((MODE) == ADC_DMAACCESSMODE_DISABLED) || \
+ ((MODE) == ADC_DMAACCESSMODE_1) || \
+ ((MODE) == ADC_DMAACCESSMODE_2) || \
+ ((MODE) == ADC_DMAACCESSMODE_3))
+#define IS_ADC_EXT_INJEC_TRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_NONE) || \
+ ((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_RISING) || \
+ ((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_FALLING) || \
+ ((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING))
+#define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC3) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC3) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15))
+#define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= ((uint32_t)1)) && ((LENGTH) <= ((uint32_t)4)))
+#define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= ((uint32_t)1)) && ((RANK) <= ((uint32_t)4)))
+
+/**
+ * @brief Set the selected injected Channel rank.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @param _JSQR_JL_: Sequence length.
+ * @retval None
+ */
+#define ADC_JSQR(_CHANNELNB_, _RANKNB_, _JSQR_JL_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5 * (uint8_t)(((_RANKNB_) + 3) - (_JSQR_JL_))))
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup ADCEx_Private_Functions ADC Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_ADC_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_can.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,775 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_can.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of CAN HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CAN_H
+#define __STM32F4xx_HAL_CAN_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CAN
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CAN_Exported_Types CAN Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_CAN_STATE_RESET = 0x00, /*!< CAN not yet initialized or disabled */
+ HAL_CAN_STATE_READY = 0x01, /*!< CAN initialized and ready for use */
+ HAL_CAN_STATE_BUSY = 0x02, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_TX = 0x12, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_RX = 0x22, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_TX_RX = 0x32, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_CAN_STATE_ERROR = 0x04 /*!< CAN error state */
+
+}HAL_CAN_StateTypeDef;
+
+/**
+ * @brief CAN init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the length of a time quantum.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 1024 */
+
+ uint32_t Mode; /*!< Specifies the CAN operating mode.
+ This parameter can be a value of @ref CAN_operating_mode */
+
+ uint32_t SJW; /*!< Specifies the maximum number of time quanta
+ the CAN hardware is allowed to lengthen or
+ shorten a bit to perform resynchronization.
+ This parameter can be a value of @ref CAN_synchronisation_jump_width */
+
+ uint32_t BS1; /*!< Specifies the number of time quanta in Bit Segment 1.
+ This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */
+
+ uint32_t BS2; /*!< Specifies the number of time quanta in Bit Segment 2.
+ This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */
+
+ uint32_t TTCM; /*!< Enable or disable the time triggered communication mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t ABOM; /*!< Enable or disable the automatic bus-off management.
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t AWUM; /*!< Enable or disable the automatic wake-up mode.
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t NART; /*!< Enable or disable the non-automatic retransmission mode.
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t RFLM; /*!< Enable or disable the receive FIFO Locked mode.
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t TXFP; /*!< Enable or disable the transmit FIFO priority.
+ This parameter can be set to ENABLE or DISABLE */
+}CAN_InitTypeDef;
+
+/**
+ * @brief CAN filter configuration structure definition
+ */
+typedef struct
+{
+ uint32_t FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit
+ configuration, first one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit
+ configuration, second one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number,
+ according to the mode (MSBs for a 32-bit configuration,
+ first one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t FilterMaskIdLow; /*!< Specifies the filter mask number or identification number,
+ according to the mode (LSBs for a 32-bit configuration,
+ second one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter.
+ This parameter can be a value of @ref CAN_filter_FIFO */
+
+ uint32_t FilterNumber; /*!< Specifies the filter which will be initialized.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 27 */
+
+ uint32_t FilterMode; /*!< Specifies the filter mode to be initialized.
+ This parameter can be a value of @ref CAN_filter_mode */
+
+ uint32_t FilterScale; /*!< Specifies the filter scale.
+ This parameter can be a value of @ref CAN_filter_scale */
+
+ uint32_t FilterActivation; /*!< Enable or disable the filter.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t BankNumber; /*!< Select the start slave bank filter.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 28 */
+
+}CAN_FilterConfTypeDef;
+
+/**
+ * @brief CAN Tx message structure definition
+ */
+typedef struct
+{
+ uint32_t StdId; /*!< Specifies the standard identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */
+
+ uint32_t ExtId; /*!< Specifies the extended identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */
+
+ uint32_t IDE; /*!< Specifies the type of identifier for the message that will be transmitted.
+ This parameter can be a value of @ref CAN_Identifier_Type */
+
+ uint32_t RTR; /*!< Specifies the type of frame for the message that will be transmitted.
+ This parameter can be a value of @ref CAN_remote_transmission_request */
+
+ uint32_t DLC; /*!< Specifies the length of the frame that will be transmitted.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 8 */
+
+ uint8_t Data[8]; /*!< Contains the data to be transmitted.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
+
+}CanTxMsgTypeDef;
+
+/**
+ * @brief CAN Rx message structure definition
+ */
+typedef struct
+{
+ uint32_t StdId; /*!< Specifies the standard identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */
+
+ uint32_t ExtId; /*!< Specifies the extended identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */
+
+ uint32_t IDE; /*!< Specifies the type of identifier for the message that will be received.
+ This parameter can be a value of @ref CAN_Identifier_Type */
+
+ uint32_t RTR; /*!< Specifies the type of frame for the received message.
+ This parameter can be a value of @ref CAN_remote_transmission_request */
+
+ uint32_t DLC; /*!< Specifies the length of the frame that will be received.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 8 */
+
+ uint8_t Data[8]; /*!< Contains the data to be received.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
+
+ uint32_t FMI; /*!< Specifies the index of the filter the message stored in the mailbox passes through.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
+
+ uint32_t FIFONumber; /*!< Specifies the receive FIFO number.
+ This parameter can be CAN_FIFO0 or CAN_FIFO1 */
+
+}CanRxMsgTypeDef;
+
+/**
+ * @brief CAN handle Structure definition
+ */
+typedef struct
+{
+ CAN_TypeDef *Instance; /*!< Register base address */
+
+ CAN_InitTypeDef Init; /*!< CAN required parameters */
+
+ CanTxMsgTypeDef* pTxMsg; /*!< Pointer to transmit structure */
+
+ CanRxMsgTypeDef* pRxMsg; /*!< Pointer to reception structure */
+
+ __IO HAL_CAN_StateTypeDef State; /*!< CAN communication state */
+
+ HAL_LockTypeDef Lock; /*!< CAN locking object */
+
+ __IO uint32_t ErrorCode; /*!< CAN Error code */
+
+}CAN_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CAN_Exported_Constants CAN Exported Constants
+ * @{
+ */
+
+/** @defgroup HAL_CAN_Error_Code HAL CAN Error Code
+ * @{
+ */
+#define HAL_CAN_ERROR_NONE 0x00 /*!< No error */
+#define HAL_CAN_ERROR_EWG 0x01 /*!< EWG error */
+#define HAL_CAN_ERROR_EPV 0x02 /*!< EPV error */
+#define HAL_CAN_ERROR_BOF 0x04 /*!< BOF error */
+#define HAL_CAN_ERROR_STF 0x08 /*!< Stuff error */
+#define HAL_CAN_ERROR_FOR 0x10 /*!< Form error */
+#define HAL_CAN_ERROR_ACK 0x20 /*!< Acknowledgment error */
+#define HAL_CAN_ERROR_BR 0x40 /*!< Bit recessive */
+#define HAL_CAN_ERROR_BD 0x80 /*!< LEC dominant */
+#define HAL_CAN_ERROR_CRC 0x100 /*!< LEC transfer error */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_InitStatus CAN InitStatus
+ * @{
+ */
+#define CAN_INITSTATUS_FAILED ((uint8_t)0x00) /*!< CAN initialization failed */
+#define CAN_INITSTATUS_SUCCESS ((uint8_t)0x01) /*!< CAN initialization OK */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_operating_mode CAN Operating Mode
+ * @{
+ */
+#define CAN_MODE_NORMAL ((uint32_t)0x00000000) /*!< Normal mode */
+#define CAN_MODE_LOOPBACK ((uint32_t)CAN_BTR_LBKM) /*!< Loopback mode */
+#define CAN_MODE_SILENT ((uint32_t)CAN_BTR_SILM) /*!< Silent mode */
+#define CAN_MODE_SILENT_LOOPBACK ((uint32_t)(CAN_BTR_LBKM | CAN_BTR_SILM)) /*!< Loopback combined with silent mode */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_synchronisation_jump_width CAN Synchronisation Jump Width
+ * @{
+ */
+#define CAN_SJW_1TQ ((uint32_t)0x00000000) /*!< 1 time quantum */
+#define CAN_SJW_2TQ ((uint32_t)CAN_BTR_SJW_0) /*!< 2 time quantum */
+#define CAN_SJW_3TQ ((uint32_t)CAN_BTR_SJW_1) /*!< 3 time quantum */
+#define CAN_SJW_4TQ ((uint32_t)CAN_BTR_SJW) /*!< 4 time quantum */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_1 CAN Time Quantum in bit segment 1
+ * @{
+ */
+#define CAN_BS1_1TQ ((uint32_t)0x00000000) /*!< 1 time quantum */
+#define CAN_BS1_2TQ ((uint32_t)CAN_BTR_TS1_0) /*!< 2 time quantum */
+#define CAN_BS1_3TQ ((uint32_t)CAN_BTR_TS1_1) /*!< 3 time quantum */
+#define CAN_BS1_4TQ ((uint32_t)(CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 4 time quantum */
+#define CAN_BS1_5TQ ((uint32_t)CAN_BTR_TS1_2) /*!< 5 time quantum */
+#define CAN_BS1_6TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 6 time quantum */
+#define CAN_BS1_7TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 7 time quantum */
+#define CAN_BS1_8TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 8 time quantum */
+#define CAN_BS1_9TQ ((uint32_t)CAN_BTR_TS1_3) /*!< 9 time quantum */
+#define CAN_BS1_10TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_0)) /*!< 10 time quantum */
+#define CAN_BS1_11TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1)) /*!< 11 time quantum */
+#define CAN_BS1_12TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 12 time quantum */
+#define CAN_BS1_13TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2)) /*!< 13 time quantum */
+#define CAN_BS1_14TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 14 time quantum */
+#define CAN_BS1_15TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 15 time quantum */
+#define CAN_BS1_16TQ ((uint32_t)CAN_BTR_TS1) /*!< 16 time quantum */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_2 CAN Time Quantum in bit segment 2
+ * @{
+ */
+#define CAN_BS2_1TQ ((uint32_t)0x00000000) /*!< 1 time quantum */
+#define CAN_BS2_2TQ ((uint32_t)CAN_BTR_TS2_0) /*!< 2 time quantum */
+#define CAN_BS2_3TQ ((uint32_t)CAN_BTR_TS2_1) /*!< 3 time quantum */
+#define CAN_BS2_4TQ ((uint32_t)(CAN_BTR_TS2_1 | CAN_BTR_TS2_0)) /*!< 4 time quantum */
+#define CAN_BS2_5TQ ((uint32_t)CAN_BTR_TS2_2) /*!< 5 time quantum */
+#define CAN_BS2_6TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_0)) /*!< 6 time quantum */
+#define CAN_BS2_7TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_1)) /*!< 7 time quantum */
+#define CAN_BS2_8TQ ((uint32_t)CAN_BTR_TS2) /*!< 8 time quantum */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_mode CAN Filter Mode
+ * @{
+ */
+#define CAN_FILTERMODE_IDMASK ((uint8_t)0x00) /*!< Identifier mask mode */
+#define CAN_FILTERMODE_IDLIST ((uint8_t)0x01) /*!< Identifier list mode */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_scale CAN Filter Scale
+ * @{
+ */
+#define CAN_FILTERSCALE_16BIT ((uint8_t)0x00) /*!< Two 16-bit filters */
+#define CAN_FILTERSCALE_32BIT ((uint8_t)0x01) /*!< One 32-bit filter */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_FIFO CAN Filter FIFO
+ * @{
+ */
+#define CAN_FILTER_FIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */
+#define CAN_FILTER_FIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Identifier_Type CAN Identifier Type
+ * @{
+ */
+#define CAN_ID_STD ((uint32_t)0x00000000) /*!< Standard Id */
+#define CAN_ID_EXT ((uint32_t)0x00000004) /*!< Extended Id */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_remote_transmission_request CAN Remote Transmission Request
+ * @{
+ */
+#define CAN_RTR_DATA ((uint32_t)0x00000000) /*!< Data frame */
+#define CAN_RTR_REMOTE ((uint32_t)0x00000002) /*!< Remote frame */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_receive_FIFO_number_constants CAN Receive FIFO Number Constants
+ * @{
+ */
+#define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */
+#define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_flags CAN Flags
+ * @{
+ */
+/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus()
+ and CAN_ClearFlag() functions. */
+/* If the flag is 0x1XXXXXXX, it means that it can only be used with
+ CAN_GetFlagStatus() function. */
+
+/* Transmit Flags */
+#define CAN_FLAG_RQCP0 ((uint32_t)0x00000500) /*!< Request MailBox0 flag */
+#define CAN_FLAG_RQCP1 ((uint32_t)0x00000508) /*!< Request MailBox1 flag */
+#define CAN_FLAG_RQCP2 ((uint32_t)0x00000510) /*!< Request MailBox2 flag */
+#define CAN_FLAG_TXOK0 ((uint32_t)0x00000501) /*!< Transmission OK MailBox0 flag */
+#define CAN_FLAG_TXOK1 ((uint32_t)0x00000509) /*!< Transmission OK MailBox1 flag */
+#define CAN_FLAG_TXOK2 ((uint32_t)0x00000511) /*!< Transmission OK MailBox2 flag */
+#define CAN_FLAG_TME0 ((uint32_t)0x0000051A) /*!< Transmit mailbox 0 empty flag */
+#define CAN_FLAG_TME1 ((uint32_t)0x0000051B) /*!< Transmit mailbox 0 empty flag */
+#define CAN_FLAG_TME2 ((uint32_t)0x0000051C) /*!< Transmit mailbox 0 empty flag */
+
+/* Receive Flags */
+#define CAN_FLAG_FF0 ((uint32_t)0x00000203) /*!< FIFO 0 Full flag */
+#define CAN_FLAG_FOV0 ((uint32_t)0x00000204) /*!< FIFO 0 Overrun flag */
+
+#define CAN_FLAG_FF1 ((uint32_t)0x00000403) /*!< FIFO 1 Full flag */
+#define CAN_FLAG_FOV1 ((uint32_t)0x00000404) /*!< FIFO 1 Overrun flag */
+
+/* Operating Mode Flags */
+#define CAN_FLAG_WKU ((uint32_t)0x00000103) /*!< Wake up flag */
+#define CAN_FLAG_SLAK ((uint32_t)0x00000101) /*!< Sleep acknowledge flag */
+#define CAN_FLAG_SLAKI ((uint32_t)0x00000104) /*!< Sleep acknowledge flag */
+/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible.
+ In this case the SLAK bit can be polled.*/
+
+/* Error Flags */
+#define CAN_FLAG_EWG ((uint32_t)0x00000300) /*!< Error warning flag */
+#define CAN_FLAG_EPV ((uint32_t)0x00000301) /*!< Error passive flag */
+#define CAN_FLAG_BOF ((uint32_t)0x00000302) /*!< Bus-Off flag */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Interrupts CAN Interrupts
+ * @{
+ */
+#define CAN_IT_TME ((uint32_t)CAN_IER_TMEIE) /*!< Transmit mailbox empty interrupt */
+
+/* Receive Interrupts */
+#define CAN_IT_FMP0 ((uint32_t)CAN_IER_FMPIE0) /*!< FIFO 0 message pending interrupt */
+#define CAN_IT_FF0 ((uint32_t)CAN_IER_FFIE0) /*!< FIFO 0 full interrupt */
+#define CAN_IT_FOV0 ((uint32_t)CAN_IER_FOVIE0) /*!< FIFO 0 overrun interrupt */
+#define CAN_IT_FMP1 ((uint32_t)CAN_IER_FMPIE1) /*!< FIFO 1 message pending interrupt */
+#define CAN_IT_FF1 ((uint32_t)CAN_IER_FFIE1) /*!< FIFO 1 full interrupt */
+#define CAN_IT_FOV1 ((uint32_t)CAN_IER_FOVIE1) /*!< FIFO 1 overrun interrupt */
+
+/* Operating Mode Interrupts */
+#define CAN_IT_WKU ((uint32_t)CAN_IER_WKUIE) /*!< Wake-up interrupt */
+#define CAN_IT_SLK ((uint32_t)CAN_IER_SLKIE) /*!< Sleep acknowledge interrupt */
+
+/* Error Interrupts */
+#define CAN_IT_EWG ((uint32_t)CAN_IER_EWGIE) /*!< Error warning interrupt */
+#define CAN_IT_EPV ((uint32_t)CAN_IER_EPVIE) /*!< Error passive interrupt */
+#define CAN_IT_BOF ((uint32_t)CAN_IER_BOFIE) /*!< Bus-off interrupt */
+#define CAN_IT_LEC ((uint32_t)CAN_IER_LECIE) /*!< Last error code interrupt */
+#define CAN_IT_ERR ((uint32_t)CAN_IER_ERRIE) /*!< Error Interrupt */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Mailboxes_Definition CAN Mailboxes Definition
+ * @{
+ */
+#define CAN_TXMAILBOX_0 ((uint8_t)0x00)
+#define CAN_TXMAILBOX_1 ((uint8_t)0x01)
+#define CAN_TXMAILBOX_2 ((uint8_t)0x02)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup CAN_Exported_Macros CAN Exported Macros
+ * @{
+ */
+
+/** @brief Reset CAN handle state
+ * @param __HANDLE__: specifies the CAN Handle.
+ * @retval None
+ */
+#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CAN_STATE_RESET)
+
+/**
+ * @brief Enable the specified CAN interrupts.
+ * @param __HANDLE__: CAN handle
+ * @param __INTERRUPT__: CAN Interrupt
+ * @retval None
+ */
+#define __HAL_CAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified CAN interrupts.
+ * @param __HANDLE__: CAN handle
+ * @param __INTERRUPT__: CAN Interrupt
+ * @retval None
+ */
+#define __HAL_CAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__))
+
+/**
+ * @brief Return the number of pending received messages.
+ * @param __HANDLE__: CAN handle
+ * @param __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+ * @retval The number of pending message.
+ */
+#define __HAL_CAN_MSG_PENDING(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
+((uint8_t)((__HANDLE__)->Instance->RF0R&(uint32_t)0x03)) : ((uint8_t)((__HANDLE__)->Instance->RF1R&(uint32_t)0x03)))
+
+/** @brief Check whether the specified CAN flag is set or not.
+ * @param __HANDLE__: CAN Handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_TSR_RQCP0: Request MailBox0 Flag
+ * @arg CAN_TSR_RQCP1: Request MailBox1 Flag
+ * @arg CAN_TSR_RQCP2: Request MailBox2 Flag
+ * @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
+ * @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
+ * @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
+ * @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
+ * @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
+ * @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
+ * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
+ * @arg CAN_FLAG_FF0: FIFO 0 Full Flag
+ * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
+ * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
+ * @arg CAN_FLAG_FF1: FIFO 1 Full Flag
+ * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
+ * @arg CAN_FLAG_WKU: Wake up Flag
+ * @arg CAN_FLAG_SLAK: Sleep acknowledge Flag
+ * @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
+ * @arg CAN_FLAG_EWG: Error Warning Flag
+ * @arg CAN_FLAG_EPV: Error Passive Flag
+ * @arg CAN_FLAG_BOF: Bus-Off Flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_CAN_GET_FLAG(__HANDLE__, __FLAG__) \
+((((__FLAG__) >> 8) == 5)? ((((__HANDLE__)->Instance->TSR) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 2)? ((((__HANDLE__)->Instance->RF0R) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 4)? ((((__HANDLE__)->Instance->RF1R) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 1)? ((((__HANDLE__)->Instance->MSR) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ ((((__HANDLE__)->Instance->ESR) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))))
+
+/** @brief Clear the specified CAN pending flag.
+ * @param __HANDLE__: CAN Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_TSR_RQCP0: Request MailBox0 Flag
+ * @arg CAN_TSR_RQCP1: Request MailBox1 Flag
+ * @arg CAN_TSR_RQCP2: Request MailBox2 Flag
+ * @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
+ * @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
+ * @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
+ * @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
+ * @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
+ * @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
+ * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
+ * @arg CAN_FLAG_FF0: FIFO 0 Full Flag
+ * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
+ * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
+ * @arg CAN_FLAG_FF1: FIFO 1 Full Flag
+ * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
+ * @arg CAN_FLAG_WKU: Wake up Flag
+ * @arg CAN_FLAG_SLAK: Sleep acknowledge Flag
+ * @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
+ * @arg CAN_FLAG_EWG: Error Warning Flag
+ * @arg CAN_FLAG_EPV: Error Passive Flag
+ * @arg CAN_FLAG_BOF: Bus-Off Flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_CAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+((((__FLAG__) >> 8) == 5)? (((__HANDLE__)->Instance->TSR) = ~((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 2)? (((__HANDLE__)->Instance->RF0R) = ~((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 4)? (((__HANDLE__)->Instance->RF1R) = ~((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 1)? (((__HANDLE__)->Instance->MSR) = ~((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__HANDLE__)->Instance->ESR) = ~((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))))
+
+/** @brief Check if the specified CAN interrupt source is enabled or disabled.
+ * @param __HANDLE__: CAN Handle
+ * @param __INTERRUPT__: specifies the CAN interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_IT_TME: Transmit mailbox empty interrupt enable
+ * @arg CAN_IT_FMP0: FIFO0 message pending interrupt enable
+ * @arg CAN_IT_FMP1: FIFO1 message pending interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_CAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+ * @brief Check the transmission status of a CAN Frame.
+ * @param __HANDLE__: CAN Handle
+ * @param __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission.
+ * @retval The new status of transmission (TRUE or FALSE).
+ */
+#define __HAL_CAN_TRANSMIT_STATUS(__HANDLE__, __TRANSMITMAILBOX__)\
+(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) == (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) :\
+ ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) == (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) :\
+ ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)) == (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)))
+
+/**
+ * @brief Release the specified receive FIFO.
+ * @param __HANDLE__: CAN handle
+ * @param __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+ * @retval None
+ */
+#define __HAL_CAN_FIFO_RELEASE(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
+((__HANDLE__)->Instance->RF0R |= CAN_RF0R_RFOM0) : ((__HANDLE__)->Instance->RF1R |= CAN_RF1R_RFOM1))
+
+/**
+ * @brief Cancel a transmit request.
+ * @param __HANDLE__: CAN Handle
+ * @param __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission.
+ * @retval None
+ */
+#define __HAL_CAN_CANCEL_TRANSMIT(__HANDLE__, __TRANSMITMAILBOX__)\
+(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ0) :\
+ ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ1) :\
+ ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ2))
+
+/**
+ * @brief Enable or disable the DBG Freeze for CAN.
+ * @param __HANDLE__: CAN Handle
+ * @param __NEWSTATE__: new state of the CAN peripheral.
+ * This parameter can be: ENABLE (CAN reception/transmission is frozen
+ * during debug. Reception FIFOs can still be accessed/controlled normally)
+ * or DISABLE (CAN is working during debug).
+ * @retval None
+ */
+#define __HAL_CAN_DBG_FREEZE(__HANDLE__, __NEWSTATE__) (((__NEWSTATE__) == ENABLE)? \
+((__HANDLE__)->Instance->MCR |= CAN_MCR_DBF) : ((__HANDLE__)->Instance->MCR &= ~CAN_MCR_DBF))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CAN_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions ***********************************/
+HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan);
+HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig);
+HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan);
+void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan);
+void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan);
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef *hcan, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef *hcan, uint8_t FIFONumber, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef *hcan, uint8_t FIFONumber);
+HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef *hcan);
+void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan);
+void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan);
+void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan);
+void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan);
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions ***************************************************/
+uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan);
+HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup CAN_Private_Types CAN Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CAN_Private_Variables CAN Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CAN_Private_Constants CAN Private Constants
+ * @{
+ */
+#define CAN_TXSTATUS_NOMAILBOX ((uint8_t)0x04) /*!< CAN cell did not provide CAN_TxStatus_NoMailBox */
+#define CAN_FLAG_MASK ((uint32_t)0x000000FF)
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CAN_Private_Macros CAN Private Macros
+ * @{
+ */
+#define IS_CAN_MODE(MODE) (((MODE) == CAN_MODE_NORMAL) || \
+ ((MODE) == CAN_MODE_LOOPBACK)|| \
+ ((MODE) == CAN_MODE_SILENT) || \
+ ((MODE) == CAN_MODE_SILENT_LOOPBACK))
+#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ)|| \
+ ((SJW) == CAN_SJW_3TQ) || ((SJW) == CAN_SJW_4TQ))
+#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16TQ)
+#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8TQ)
+#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024))
+#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27)
+#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \
+ ((MODE) == CAN_FILTERMODE_IDLIST))
+#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \
+ ((SCALE) == CAN_FILTERSCALE_32BIT))
+#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FILTER_FIFO0) || \
+ ((FIFO) == CAN_FILTER_FIFO1))
+#define IS_CAN_BANKNUMBER(BANKNUMBER) ((BANKNUMBER) <= 28)
+
+#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02))
+#define IS_CAN_STDID(STDID) ((STDID) <= ((uint32_t)0x7FF))
+#define IS_CAN_EXTID(EXTID) ((EXTID) <= ((uint32_t)0x1FFFFFFF))
+#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08))
+
+#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_ID_STD) || \
+ ((IDTYPE) == CAN_ID_EXT))
+#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE))
+#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1))
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CAN_Private_Functions CAN Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_CAN_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_cec.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,681 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_cec.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of CEC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CEC_H
+#define __STM32F4xx_HAL_CEC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F446xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CEC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CEC_Exported_Types CEC Exported Types
+ * @{
+ */
+
+/**
+ * @brief CEC Init Structure definition
+ */
+typedef struct
+{
+ uint32_t SignalFreeTime; /*!< Set SFT field, specifies the Signal Free Time.
+ It can be one of @ref CEC_Signal_Free_Time
+ and belongs to the set {0,...,7} where
+ 0x0 is the default configuration
+ else means 0.5 + (SignalFreeTime - 1) nominal data bit periods */
+
+ uint32_t Tolerance; /*!< Set RXTOL bit, specifies the tolerance accepted on the received waveforms,
+ it can be a value of @ref CEC_Tolerance : it is either CEC_STANDARD_TOLERANCE
+ or CEC_EXTENDED_TOLERANCE */
+
+ uint32_t BRERxStop; /*!< Set BRESTP bit @ref CEC_BRERxStop : specifies whether or not a Bit Rising Error stops the reception.
+ CEC_NO_RX_STOP_ON_BRE: reception is not stopped.
+ CEC_RX_STOP_ON_BRE: reception is stopped. */
+
+ uint32_t BREErrorBitGen; /*!< Set BREGEN bit @ref CEC_BREErrorBitGen : specifies whether or not an Error-Bit is generated on the
+ CEC line upon Bit Rising Error detection.
+ CEC_BRE_ERRORBIT_NO_GENERATION: no error-bit generation.
+ CEC_BRE_ERRORBIT_GENERATION: error-bit generation if BRESTP is set. */
+
+ uint32_t LBPEErrorBitGen; /*!< Set LBPEGEN bit @ref CEC_LBPEErrorBitGen : specifies whether or not an Error-Bit is generated on the
+ CEC line upon Long Bit Period Error detection.
+ CEC_LBPE_ERRORBIT_NO_GENERATION: no error-bit generation.
+ CEC_LBPE_ERRORBIT_GENERATION: error-bit generation. */
+
+ uint32_t BroadcastMsgNoErrorBitGen; /*!< Set BRDNOGEN bit @ref CEC_BroadCastMsgErrorBitGen : allows to avoid an Error-Bit generation on the CEC line
+ upon an error detected on a broadcast message.
+
+ It supersedes BREGEN and LBPEGEN bits for a broadcast message error handling. It can take two values:
+
+ 1) CEC_BROADCASTERROR_ERRORBIT_GENERATION.
+ a) BRE detection: error-bit generation on the CEC line if BRESTP=CEC_RX_STOP_ON_BRE
+ and BREGEN=CEC_BRE_ERRORBIT_NO_GENERATION.
+ b) LBPE detection: error-bit generation on the CEC line
+ if LBPGEN=CEC_LBPE_ERRORBIT_NO_GENERATION.
+
+ 2) CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION.
+ no error-bit generation in case neither a) nor b) are satisfied. Additionally,
+ there is no error-bit generation in case of Short Bit Period Error detection in
+ a broadcast message while LSTN bit is set. */
+
+ uint32_t SignalFreeTimeOption; /*!< Set SFTOP bit @ref CEC_SFT_Option : specifies when SFT timer starts.
+ CEC_SFT_START_ON_TXSOM SFT: timer starts when TXSOM is set by software.
+ CEC_SFT_START_ON_TX_RX_END: SFT timer starts automatically at the end of message transmission/reception. */
+
+ uint32_t OwnAddress; /*!< Set OAR field, specifies CEC device address within a 15-bit long field */
+
+ uint32_t ListenMode; /*!< Set LSTN bit @ref CEC_Listening_Mode : specifies device listening mode. It can take two values:
+
+ CEC_REDUCED_LISTENING_MODE: CEC peripheral receives only message addressed to its
+ own address (OAR). Messages addressed to different destination are ignored.
+ Broadcast messages are always received.
+
+ CEC_FULL_LISTENING_MODE: CEC peripheral receives messages addressed to its own
+ address (OAR) with positive acknowledge. Messages addressed to different destination
+ are received, but without interfering with the CEC bus: no acknowledge sent. */
+
+ uint8_t InitiatorAddress; /* Initiator address (source logical address, sent in each header) */
+
+}CEC_InitTypeDef;
+
+/**
+ * @brief HAL CEC State structures definition
+ */
+typedef enum
+{
+ HAL_CEC_STATE_RESET = 0x00, /*!< Peripheral Reset state */
+ HAL_CEC_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_CEC_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_CEC_STATE_BUSY_TX = 0x03, /*!< Data Transmission process is ongoing */
+ HAL_CEC_STATE_BUSY_RX = 0x04, /*!< Data Reception process is ongoing */
+ HAL_CEC_STATE_STANDBY_RX = 0x05, /*!< IP ready to receive, doesn't prevent IP to transmit */
+ HAL_CEC_STATE_TIMEOUT = 0x06, /*!< Timeout state */
+ HAL_CEC_STATE_ERROR = 0x07 /*!< State Error */
+}HAL_CEC_StateTypeDef;
+
+/**
+ * @brief CEC handle Structure definition
+ */
+typedef struct
+{
+ CEC_TypeDef *Instance; /* CEC registers base address */
+
+ CEC_InitTypeDef Init; /* CEC communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to CEC Tx transfer Buffer */
+
+ uint16_t TxXferCount; /* CEC Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to CEC Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* CEC Rx Transfer size, 0: header received only */
+
+ uint32_t ErrorCode; /* For errors handling purposes, copy of ISR register
+ in case error is reported */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ HAL_CEC_StateTypeDef State; /* CEC communication state */
+
+}CEC_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CEC_Exported_Constants CEC Exported Constants
+ * @{
+ */
+
+/** @defgroup CEC_Error_Code CEC Error Code
+ * @{
+ */
+#define HAL_CEC_ERROR_NONE (uint32_t) 0x0 /*!< no error */
+#define HAL_CEC_ERROR_RXOVR CEC_ISR_RXOVR /*!< CEC Rx-Overrun */
+#define HAL_CEC_ERROR_BRE CEC_ISR_BRE /*!< CEC Rx Bit Rising Error */
+#define HAL_CEC_ERROR_SBPE CEC_ISR_SBPE /*!< CEC Rx Short Bit period Error */
+#define HAL_CEC_ERROR_LBPE CEC_ISR_LBPE /*!< CEC Rx Long Bit period Error */
+#define HAL_CEC_ERROR_RXACKE CEC_ISR_RXACKE /*!< CEC Rx Missing Acknowledge */
+#define HAL_CEC_ERROR_ARBLST CEC_ISR_ARBLST /*!< CEC Arbitration Lost */
+#define HAL_CEC_ERROR_TXUDR CEC_ISR_TXUDR /*!< CEC Tx-Buffer Underrun */
+#define HAL_CEC_ERROR_TXERR CEC_ISR_TXERR /*!< CEC Tx-Error */
+#define HAL_CEC_ERROR_TXACKE CEC_ISR_TXACKE /*!< CEC Tx Missing Acknowledge */
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Signal_Free_Time CEC Signal Free Time setting parameter
+ * @{
+ */
+#define CEC_DEFAULT_SFT ((uint32_t)0x00000000)
+#define CEC_0_5_BITPERIOD_SFT ((uint32_t)0x00000001)
+#define CEC_1_5_BITPERIOD_SFT ((uint32_t)0x00000002)
+#define CEC_2_5_BITPERIOD_SFT ((uint32_t)0x00000003)
+#define CEC_3_5_BITPERIOD_SFT ((uint32_t)0x00000004)
+#define CEC_4_5_BITPERIOD_SFT ((uint32_t)0x00000005)
+#define CEC_5_5_BITPERIOD_SFT ((uint32_t)0x00000006)
+#define CEC_6_5_BITPERIOD_SFT ((uint32_t)0x00000007)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Tolerance CEC Receiver Tolerance
+ * @{
+ */
+#define CEC_STANDARD_TOLERANCE ((uint32_t)0x00000000)
+#define CEC_EXTENDED_TOLERANCE ((uint32_t)CEC_CFGR_RXTOL)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BRERxStop CEC Reception Stop on Error
+ * @{
+ */
+#define CEC_NO_RX_STOP_ON_BRE ((uint32_t)0x00000000)
+#define CEC_RX_STOP_ON_BRE ((uint32_t)CEC_CFGR_BRESTP)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BREErrorBitGen CEC Error Bit Generation if Bit Rise Error reported
+ * @{
+ */
+#define CEC_BRE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000)
+#define CEC_BRE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BREGEN)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_LBPEErrorBitGen CEC Error Bit Generation if Long Bit Period Error reported
+ * @{
+ */
+#define CEC_LBPE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000)
+#define CEC_LBPE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_LBPEGEN)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BroadCastMsgErrorBitGen CEC Error Bit Generation on Broadcast message
+ * @{
+ */
+#define CEC_BROADCASTERROR_ERRORBIT_GENERATION ((uint32_t)0x00000000)
+#define CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BRDNOGEN)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_SFT_Option CEC Signal Free Time start option
+ * @{
+ */
+#define CEC_SFT_START_ON_TXSOM ((uint32_t)0x00000000)
+#define CEC_SFT_START_ON_TX_RX_END ((uint32_t)CEC_CFGR_SFTOPT)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Listening_Mode CEC Listening mode option
+ * @{
+ */
+#define CEC_REDUCED_LISTENING_MODE ((uint32_t)0x00000000)
+#define CEC_FULL_LISTENING_MODE ((uint32_t)CEC_CFGR_LSTN)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_OAR_Position CEC Device Own Address position in CEC CFGR register
+ * @{
+ */
+#define CEC_CFGR_OAR_LSB_POS ((uint32_t) 16)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Initiator_Position CEC Initiator logical address position in message header
+ * @{
+ */
+#define CEC_INITIATOR_LSB_POS ((uint32_t) 4)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Interrupts_Definitions CEC Interrupts definition
+ * @{
+ */
+#define CEC_IT_TXACKE CEC_IER_TXACKEIE
+#define CEC_IT_TXERR CEC_IER_TXERRIE
+#define CEC_IT_TXUDR CEC_IER_TXUDRIE
+#define CEC_IT_TXEND CEC_IER_TXENDIE
+#define CEC_IT_TXBR CEC_IER_TXBRIE
+#define CEC_IT_ARBLST CEC_IER_ARBLSTIE
+#define CEC_IT_RXACKE CEC_IER_RXACKEIE
+#define CEC_IT_LBPE CEC_IER_LBPEIE
+#define CEC_IT_SBPE CEC_IER_SBPEIE
+#define CEC_IT_BRE CEC_IER_BREIE
+#define CEC_IT_RXOVR CEC_IER_RXOVRIE
+#define CEC_IT_RXEND CEC_IER_RXENDIE
+#define CEC_IT_RXBR CEC_IER_RXBRIE
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Flags_Definitions CEC Flags definition
+ * @{
+ */
+#define CEC_FLAG_TXACKE CEC_ISR_TXACKE
+#define CEC_FLAG_TXERR CEC_ISR_TXERR
+#define CEC_FLAG_TXUDR CEC_ISR_TXUDR
+#define CEC_FLAG_TXEND CEC_ISR_TXEND
+#define CEC_FLAG_TXBR CEC_ISR_TXBR
+#define CEC_FLAG_ARBLST CEC_ISR_ARBLST
+#define CEC_FLAG_RXACKE CEC_ISR_RXACKE
+#define CEC_FLAG_LBPE CEC_ISR_LBPE
+#define CEC_FLAG_SBPE CEC_ISR_SBPE
+#define CEC_FLAG_BRE CEC_ISR_BRE
+#define CEC_FLAG_RXOVR CEC_ISR_RXOVR
+#define CEC_FLAG_RXEND CEC_ISR_RXEND
+#define CEC_FLAG_RXBR CEC_ISR_RXBR
+/**
+ * @}
+ */
+
+/** @defgroup CEC_ALL_ERROR CEC all RX or TX errors flags
+ * @{
+ */
+#define CEC_ISR_ALL_ERROR ((uint32_t)CEC_ISR_RXOVR|CEC_ISR_BRE|CEC_ISR_SBPE|CEC_ISR_LBPE|CEC_ISR_RXACKE|\
+ CEC_ISR_ARBLST|CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_IER_ALL_RX CEC all RX errors interrupts enabling flag
+ * @{
+ */
+#define CEC_IER_RX_ALL_ERR ((uint32_t)CEC_IER_RXACKEIE|CEC_IER_LBPEIE|CEC_IER_SBPEIE|CEC_IER_BREIE|CEC_IER_RXOVRIE)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_IER_ALL_TX CEC all TX errors interrupts enabling flag
+ * @{
+ */
+#define CEC_IER_TX_ALL_ERR ((uint32_t)CEC_IER_TXACKEIE|CEC_IER_TXERRIE|CEC_IER_TXUDRIE|CEC_IER_ARBLSTIE)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup CEC_Exported_Macros CEC Exported Macros
+ * @{
+ */
+
+/** @brief Reset CEC handle state
+ * @param __HANDLE__: CEC handle.
+ * @retval None
+ */
+#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CEC_STATE_RESET)
+
+/** @brief Checks whether or not the specified CEC interrupt flag is set.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __FLAG__: specifies the interrupt to check.
+ * @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error
+ * @arg CEC_FLAG_TXERR: Tx Error.
+ * @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun.
+ * @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte).
+ * @arg CEC_FLAG_TXBR: Tx-Byte Request.
+ * @arg CEC_FLAG_ARBLST: Arbitration Lost
+ * @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge
+ * @arg CEC_FLAG_LBPE: Rx Long period Error
+ * @arg CEC_FLAG_SBPE: Rx Short period Error
+ * @arg CEC_FLAG_BRE: Rx Bit Rissing Error
+ * @arg CEC_FLAG_RXOVR: Rx Overrun.
+ * @arg CEC_FLAG_RXEND: End Of Reception.
+ * @arg CEC_FLAG_RXBR: Rx-Byte Received.
+ * @retval ITStatus
+ */
+#define __HAL_CEC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
+
+/** @brief Clears the interrupt or status flag when raised (write at 1)
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __FLAG__: specifies the interrupt/status flag to clear.
+ * This parameter can be one of the following values:
+ * @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error
+ * @arg CEC_FLAG_TXERR: Tx Error.
+ * @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun.
+ * @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte).
+ * @arg CEC_FLAG_TXBR: Tx-Byte Request.
+ * @arg CEC_FLAG_ARBLST: Arbitration Lost
+ * @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge
+ * @arg CEC_FLAG_LBPE: Rx Long period Error
+ * @arg CEC_FLAG_SBPE: Rx Short period Error
+ * @arg CEC_FLAG_BRE: Rx Bit Rissing Error
+ * @arg CEC_FLAG_RXOVR: Rx Overrun.
+ * @arg CEC_FLAG_RXEND: End Of Reception.
+ * @arg CEC_FLAG_RXBR: Rx-Byte Received.
+ * @retval none
+ */
+#define __HAL_CEC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR |= (__FLAG__))
+
+/** @brief Enables the specified CEC interrupt.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the CEC interrupt to enable.
+ * This parameter can be one of the following values:
+ * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable
+ * @arg CEC_IT_TXERR: Tx Error IT Enable
+ * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable
+ * @arg CEC_IT_TXEND: End of transmission IT Enable
+ * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable
+ * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable
+ * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable
+ * @arg CEC_IT_LBPE: Rx Long period Error IT Enable
+ * @arg CEC_IT_SBPE: Rx Short period Error IT Enable
+ * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable
+ * @arg CEC_IT_RXOVR: Rx Overrun IT Enable
+ * @arg CEC_IT_RXEND: End Of Reception IT Enable
+ * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable
+ * @retval none
+ */
+#define __HAL_CEC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/** @brief Disables the specified CEC interrupt.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the CEC interrupt to disable.
+ * This parameter can be one of the following values:
+ * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable
+ * @arg CEC_IT_TXERR: Tx Error IT Enable
+ * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable
+ * @arg CEC_IT_TXEND: End of transmission IT Enable
+ * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable
+ * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable
+ * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable
+ * @arg CEC_IT_LBPE: Rx Long period Error IT Enable
+ * @arg CEC_IT_SBPE: Rx Short period Error IT Enable
+ * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable
+ * @arg CEC_IT_RXOVR: Rx Overrun IT Enable
+ * @arg CEC_IT_RXEND: End Of Reception IT Enable
+ * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable
+ * @retval none
+ */
+#define __HAL_CEC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__)))
+
+/** @brief Checks whether or not the specified CEC interrupt is enabled.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the CEC interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable
+ * @arg CEC_IT_TXERR: Tx Error IT Enable
+ * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable
+ * @arg CEC_IT_TXEND: End of transmission IT Enable
+ * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable
+ * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable
+ * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable
+ * @arg CEC_IT_LBPE: Rx Long period Error IT Enable
+ * @arg CEC_IT_SBPE: Rx Short period Error IT Enable
+ * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable
+ * @arg CEC_IT_RXOVR: Rx Overrun IT Enable
+ * @arg CEC_IT_RXEND: End Of Reception IT Enable
+ * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable
+ * @retval FlagStatus
+ */
+#define __HAL_CEC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__))
+
+/** @brief Enables the CEC device
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_CECEN)
+
+/** @brief Disables the CEC device
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~CEC_CR_CECEN)
+
+/** @brief Set Transmission Start flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_FIRST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXSOM)
+
+/** @brief Set Transmission End flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ * If the CEC message consists of only one byte, TXEOM must be set before of TXSOM.
+ */
+#define __HAL_CEC_LAST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXEOM)
+
+/** @brief Get Transmission Start flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval FlagStatus
+ */
+#define __HAL_CEC_GET_TRANSMISSION_START_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXSOM)
+
+/** @brief Get Transmission End flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval FlagStatus
+ */
+#define __HAL_CEC_GET_TRANSMISSION_END_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXEOM)
+
+/** @brief Clear OAR register
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_CLEAR_OAR(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_OAR)
+
+/** @brief Set OAR register (without resetting previously set address in case of multi-address mode)
+ * To reset OAR, __HAL_CEC_CLEAR_OAR() needs to be called beforehand
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __ADDRESS__: Own Address value (CEC logical address is identified by bit position)
+ * @retval none
+ */
+#define __HAL_CEC_SET_OAR(__HANDLE__,__ADDRESS__) SET_BIT((__HANDLE__)->Instance->CFGR, (__ADDRESS__)<< CEC_CFGR_OAR_LSB_POS)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CEC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup CEC_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec);
+HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec);
+void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec);
+void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec);
+/**
+ * @}
+ */
+
+/** @addtogroup CEC_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ***************************************************/
+HAL_StatusTypeDef HAL_CEC_Transmit(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CEC_Receive(CEC_HandleTypeDef *hcec, uint8_t *pData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size);
+HAL_StatusTypeDef HAL_CEC_Receive_IT(CEC_HandleTypeDef *hcec, uint8_t *pData);
+uint32_t HAL_CEC_GetReceivedFrameSize(CEC_HandleTypeDef *hcec);
+void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec);
+void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec);
+void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec);
+void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec);
+/**
+ * @}
+ */
+
+/** @addtogroup CEC_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions ************************************************/
+HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec);
+uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup CEC_Private_Types CEC Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CEC_Private_Variables CEC Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CEC_Private_Constants CEC Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CEC_Private_Macros CEC Private Macros
+ * @{
+ */
+
+#define IS_CEC_SIGNALFREETIME(__SFT__) ((__SFT__) <= CEC_CFGR_SFT)
+
+#define IS_CEC_TOLERANCE(__RXTOL__) (((__RXTOL__) == CEC_STANDARD_TOLERANCE) || \
+ ((__RXTOL__) == CEC_EXTENDED_TOLERANCE))
+
+#define IS_CEC_BRERXSTOP(__BRERXSTOP__) (((__BRERXSTOP__) == CEC_NO_RX_STOP_ON_BRE) || \
+ ((__BRERXSTOP__) == CEC_RX_STOP_ON_BRE))
+
+#define IS_CEC_BREERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_NO_GENERATION) || \
+ ((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_GENERATION))
+
+#define IS_CEC_LBPEERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_NO_GENERATION) || \
+ ((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_GENERATION))
+
+#define IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BROADCASTERROR_ERRORBIT_GENERATION) || \
+ ((__ERRORBITGEN__) == CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION))
+
+#define IS_CEC_SFTOP(__SFTOP__) (((__SFTOP__) == CEC_SFT_START_ON_TXSOM) || \
+ ((__SFTOP__) == CEC_SFT_START_ON_TX_RX_END))
+
+#define IS_CEC_LISTENING_MODE(__MODE__) (((__MODE__) == CEC_REDUCED_LISTENING_MODE) || \
+ ((__MODE__) == CEC_FULL_LISTENING_MODE))
+
+/** @brief Check CEC device Own Address Register (OAR) setting.
+ * OAR address is written in a 15-bit field within CEC_CFGR register.
+ * @param __ADDRESS__: CEC own address.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_OAR_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x07FFF)
+
+/** @brief Check CEC initiator or destination logical address setting.
+ * Initiator and destination addresses are coded over 4 bits.
+ * @param __ADDRESS__: CEC initiator or logical address.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0xF)
+
+/** @brief Check CEC message size.
+ * The message size is the payload size: without counting the header,
+ * it varies from 0 byte (ping operation, one header only, no payload) to
+ * 15 bytes (1 opcode and up to 14 operands following the header).
+ * @param __SIZE__: CEC message size.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_MSGSIZE(__SIZE__) ((__SIZE__) <= 0xF)
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CEC_Private_Functions CEC Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F446xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CEC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_conf.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,405 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_conf.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 26-December-2014
+ * @brief HAL configuration file
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CONF_H
+#define __STM32F4xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_CAN_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DCMI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+/* #define HAL_DMA2D_MODULE_ENABLED */
+#define HAL_ETH_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_NAND_MODULE_ENABLED
+#define HAL_NOR_MODULE_ENABLED
+#define HAL_PCCARD_MODULE_ENABLED
+#define HAL_SRAM_MODULE_ENABLED
+/* #define HAL_SDRAM_MODULE_ENABLED */
+#define HAL_HASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_LTDC_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+/* #define HAL_SAI_MODULE_ENABLED */
+#define HAL_SD_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_HCD_MODULE_ENABLED
+
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief Internal Low Speed oscillator (LSI) value.
+ */
+#if !defined (LSI_VALUE)
+ #define LSI_VALUE ((uint32_t)32000)
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+/**
+ * @brief External clock source for I2S peripheral
+ * This value is used by the I2S HAL module to compute the I2S clock source
+ * frequency, this source is inserted directly through I2S_CKIN pad.
+ */
+#if !defined (EXTERNAL_CLOCK_VALUE)
+ #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY ((uint32_t)0x0F) /*!< tick interrupt priority */
+#define USE_RTOS 0
+#define PREFETCH_ENABLE 1
+#define INSTRUCTION_CACHE_ENABLE 1
+#define DATA_CACHE_ENABLE 1
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/* #define USE_FULL_ASSERT 1 */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0 2
+#define MAC_ADDR1 0
+#define MAC_ADDR2 0
+#define MAC_ADDR3 0
+#define MAC_ADDR4 0
+#define MAC_ADDR5 0
+
+/* Definition of the Ethernet driver buffers size and count */
+#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
+#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
+#define ETH_RXBUFNB ((uint32_t)4) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
+#define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848 PHY Address*/
+#define DP83848_PHY_ADDRESS 0x01
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY ((uint32_t)0x000000FF)
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF)
+
+#define PHY_READ_TO ((uint32_t)0x0000FFFF)
+#define PHY_WRITE_TO ((uint32_t)0x0000FFFF)
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */
+#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */
+
+#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
+#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
+#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
+#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
+#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
+#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
+#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
+
+#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
+#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
+#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
+
+/* Section 4: Extended PHY Registers */
+
+#define PHY_SR ((uint16_t)0x10) /*!< PHY status register Offset */
+#define PHY_MICR ((uint16_t)0x11) /*!< MII Interrupt Control Register */
+#define PHY_MISR ((uint16_t)0x12) /*!< MII Interrupt Status and Misc. Control Register */
+
+#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */
+#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */
+#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */
+
+#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */
+#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */
+
+#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */
+#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32f4xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+ #include "stm32f4xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32f4xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32f4xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32f4xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32f4xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+ #include "stm32f4xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+ #include "stm32f4xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32f4xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+ #include "stm32f4xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+ #include "stm32f4xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+ #include "stm32f4xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+ #include "stm32f4xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+ #include "stm32f4xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+ #include "stm32f4xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32f4xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f4xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32f4xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32f4xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f4xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f4xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f4xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f4xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_cortex.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,200 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_cortex.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of CORTEX HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CORTEX_H
+#define __STM32F4xx_HAL_CORTEX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CORTEX
+ * @{
+ */
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
+ * @{
+ */
+
+/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group
+ * @{
+ */
+#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007) /*!< 0 bits for pre-emption priority
+ 4 bits for subpriority */
+#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006) /*!< 1 bits for pre-emption priority
+ 3 bits for subpriority */
+#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority
+ 2 bits for subpriority */
+#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority
+ 1 bits for subpriority */
+#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority
+ 0 bits for subpriority */
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source
+ * @{
+ */
+#define SYSTICK_CLKSOURCE_HCLK_DIV8 ((uint32_t)0x00000000)
+#define SYSTICK_CLKSOURCE_HCLK ((uint32_t)0x00000004)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported Macros -----------------------------------------------------------*/
+/** @defgroup CORTEX_Exported_Macros CORTEX Exported Macros
+ * @{
+ */
+
+/** @brief Configures the SysTick clock source.
+ * @param __CLKSRC__: specifies the SysTick clock source.
+ * This parameter can be one of the following values:
+ * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
+ * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
+ * @retval None
+ */
+#define __HAL_CORTEX_SYSTICKCLK_CONFIG(__CLKSRC__) \
+ do { \
+ if ((__CLKSRC__) == SYSTICK_CLKSOURCE_HCLK) \
+ { \
+ SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK; \
+ } \
+ else \
+ SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK; \
+ } while(0)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CORTEX_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup CORTEX_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup);
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SystemReset(void);
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
+/**
+ * @}
+ */
+
+/** @addtogroup CORTEX_Exported_Functions_Group2
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+uint32_t HAL_NVIC_GetPriorityGrouping(void);
+void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority);
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
+uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
+void HAL_SYSTICK_IRQHandler(void);
+void HAL_SYSTICK_Callback(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CORTEX_Private_Macros CORTEX Private Macros
+ * @{
+ */
+#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_1) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_2) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_3) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_4))
+
+#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
+
+#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
+
+#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= 0x00)
+
+#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
+ ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CORTEX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_crc.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,249 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_crc.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of CRC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CRC_H
+#define __STM32F4xx_HAL_CRC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup CRC CRC
+ * @brief CRC HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CRC_Exported_Types CRC Exported Types
+ * @{
+ */
+
+/** @defgroup CRC_Exported_Types_Group1 CRC State Structure definition
+ * @{
+ */
+typedef enum
+{
+ HAL_CRC_STATE_RESET = 0x00, /*!< CRC not yet initialized or disabled */
+ HAL_CRC_STATE_READY = 0x01, /*!< CRC initialized and ready for use */
+ HAL_CRC_STATE_BUSY = 0x02, /*!< CRC internal process is ongoing */
+ HAL_CRC_STATE_TIMEOUT = 0x03, /*!< CRC timeout state */
+ HAL_CRC_STATE_ERROR = 0x04 /*!< CRC error state */
+
+}HAL_CRC_StateTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Exported_Types_Group2 CRC Handle Structure definition
+ * @{
+ */
+typedef struct
+{
+ CRC_TypeDef *Instance; /*!< Register base address */
+
+ HAL_LockTypeDef Lock; /*!< CRC locking object */
+
+ __IO HAL_CRC_StateTypeDef State; /*!< CRC communication state */
+
+}CRC_HandleTypeDef;
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup CRC_Exported_Macros CRC Exported Macros
+ * @{
+ */
+
+/** @brief Resets CRC handle state
+ * @param __HANDLE__: CRC handle
+ * @retval None
+ */
+#define __HAL_CRC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRC_STATE_RESET)
+
+/**
+ * @brief Resets CRC Data Register.
+ * @param __HANDLE__: CRC handle
+ * @retval None
+ */
+#define __HAL_CRC_DR_RESET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_RESET)
+
+/**
+ * @brief Stores a 8-bit data in the Independent Data(ID) register.
+ * @param __HANDLE__: CRC handle
+ * @param __VALUE__: 8-bit value to be stored in the ID register
+ * @retval None
+ */
+#define __HAL_CRC_SET_IDR(__HANDLE__, __VALUE__) (MODIFY_REG((__HANDLE__)->Instance->IDR, CRC_IDR_IDR, (__VALUE__))
+
+/**
+ * @brief Returns the 8-bit data stored in the Independent Data(ID) register.
+ * @param __HANDLE__: CRC handle
+ * @retval 8-bit value of the ID register
+ */
+#define __HAL_CRC_GET_IDR(__HANDLE__) (((__HANDLE__)->Instance->IDR) & CRC_IDR_IDR)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CRC_Exported_Functions CRC Exported Functions
+ * @{
+ */
+
+/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc);
+HAL_StatusTypeDef HAL_CRC_DeInit (CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc);
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions
+ * @{
+ */
+uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
+uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions
+ * @{
+ */
+HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/** @defgroup CRC_Private_Types CRC Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup CRC_Private_Defines CRC Private Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CRC_Private_Variables CRC Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CRC_Private_Constants CRC Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CRC_Private_Macros CRC Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup CRC_Private_Functions_Prototypes CRC Private Functions Prototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CRC_Private_Functions CRC Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CRC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_cryp.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,536 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_cryp.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of CRYP HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CRYP_H
+#define __STM32F4xx_HAL_CRYP_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F415xx) || defined(STM32F417xx) || defined(STM32F437xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CRYP
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup CRYP_Exported_Types CRYP Exported Types
+ * @{
+ */
+
+/** @defgroup CRYP_Exported_Types_Group1 CRYP Configuration Structure definition
+ * @{
+ */
+
+typedef struct
+{
+ uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string.
+ This parameter can be a value of @ref CRYP CRYP_Data_Type */
+
+ uint32_t KeySize; /*!< Used only in AES mode only : 128, 192 or 256 bit key length.
+ This parameter can be a value of @ref CRYP CRYP_Key_Size */
+
+ uint8_t* pKey; /*!< The key used for encryption/decryption */
+
+ uint8_t* pInitVect; /*!< The initialization vector used also as initialization
+ counter in CTR mode */
+
+ uint8_t IVSize; /*!< The size of initialization vector.
+ This parameter (called nonce size in CCM) is used only
+ in AES-128/192/256 encryption/decryption CCM mode */
+
+ uint8_t TagSize; /*!< The size of returned authentication TAG.
+ This parameter is used only in AES-128/192/256
+ encryption/decryption CCM mode */
+
+ uint8_t* Header; /*!< The header used in GCM and CCM modes */
+
+ uint32_t HeaderSize; /*!< The size of header buffer in bytes */
+
+ uint8_t* pScratch; /*!< Scratch buffer used to append the header. It's size must be equal to header size + 21 bytes.
+ This parameter is used only in AES-128/192/256 encryption/decryption CCM mode */
+}CRYP_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Types_Group2 CRYP State structures definition
+ * @{
+ */
+
+
+typedef enum
+{
+ HAL_CRYP_STATE_RESET = 0x00, /*!< CRYP not yet initialized or disabled */
+ HAL_CRYP_STATE_READY = 0x01, /*!< CRYP initialized and ready for use */
+ HAL_CRYP_STATE_BUSY = 0x02, /*!< CRYP internal processing is ongoing */
+ HAL_CRYP_STATE_TIMEOUT = 0x03, /*!< CRYP timeout state */
+ HAL_CRYP_STATE_ERROR = 0x04 /*!< CRYP error state */
+}HAL_CRYP_STATETypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Types_Group3 CRYP phase structures definition
+ * @{
+ */
+
+
+typedef enum
+{
+ HAL_CRYP_PHASE_READY = 0x01, /*!< CRYP peripheral is ready for initialization. */
+ HAL_CRYP_PHASE_PROCESS = 0x02, /*!< CRYP peripheral is in processing phase */
+ HAL_CRYP_PHASE_FINAL = 0x03 /*!< CRYP peripheral is in final phase
+ This is relevant only with CCM and GCM modes */
+}HAL_PhaseTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Types_Group4 CRYP handle Structure definition
+ * @{
+ */
+
+typedef struct
+{
+ CRYP_TypeDef *Instance; /*!< CRYP registers base address */
+
+ CRYP_InitTypeDef Init; /*!< CRYP required parameters */
+
+ uint8_t *pCrypInBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */
+
+ uint8_t *pCrypOutBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */
+
+ __IO uint16_t CrypInCount; /*!< Counter of inputed data */
+
+ __IO uint16_t CrypOutCount; /*!< Counter of outputted data */
+
+ HAL_StatusTypeDef Status; /*!< CRYP peripheral status */
+
+ HAL_PhaseTypeDef Phase; /*!< CRYP peripheral phase */
+
+ DMA_HandleTypeDef *hdmain; /*!< CRYP In DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmaout; /*!< CRYP Out DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< CRYP locking object */
+
+ __IO HAL_CRYP_STATETypeDef State; /*!< CRYP peripheral state */
+}CRYP_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CRYP_Exported_Constants CRYP Exported Constants
+ * @{
+ */
+
+/** @defgroup CRYP_Exported_Constants_Group1 CRYP CRYP_Key_Size
+ * @{
+ */
+#define CRYP_KEYSIZE_128B ((uint32_t)0x00000000)
+#define CRYP_KEYSIZE_192B CRYP_CR_KEYSIZE_0
+#define CRYP_KEYSIZE_256B CRYP_CR_KEYSIZE_1
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Constants_Group2 CRYP CRYP_Data_Type
+ * @{
+ */
+#define CRYP_DATATYPE_32B ((uint32_t)0x00000000)
+#define CRYP_DATATYPE_16B CRYP_CR_DATATYPE_0
+#define CRYP_DATATYPE_8B CRYP_CR_DATATYPE_1
+#define CRYP_DATATYPE_1B CRYP_CR_DATATYPE
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Constants_Group3 CRYP CRYP_AlgoModeDirection
+ * @{
+ */
+#define CRYP_CR_ALGOMODE_DIRECTION ((uint32_t)0x0008003C)
+#define CRYP_CR_ALGOMODE_TDES_ECB_ENCRYPT ((uint32_t)0x00000000)
+#define CRYP_CR_ALGOMODE_TDES_ECB_DECRYPT ((uint32_t)0x00000004)
+#define CRYP_CR_ALGOMODE_TDES_CBC_ENCRYPT ((uint32_t)0x00000008)
+#define CRYP_CR_ALGOMODE_TDES_CBC_DECRYPT ((uint32_t)0x0000000C)
+#define CRYP_CR_ALGOMODE_DES_ECB_ENCRYPT ((uint32_t)0x00000010)
+#define CRYP_CR_ALGOMODE_DES_ECB_DECRYPT ((uint32_t)0x00000014)
+#define CRYP_CR_ALGOMODE_DES_CBC_ENCRYPT ((uint32_t)0x00000018)
+#define CRYP_CR_ALGOMODE_DES_CBC_DECRYPT ((uint32_t)0x0000001C)
+#define CRYP_CR_ALGOMODE_AES_ECB_ENCRYPT ((uint32_t)0x00000020)
+#define CRYP_CR_ALGOMODE_AES_ECB_DECRYPT ((uint32_t)0x00000024)
+#define CRYP_CR_ALGOMODE_AES_CBC_ENCRYPT ((uint32_t)0x00000028)
+#define CRYP_CR_ALGOMODE_AES_CBC_DECRYPT ((uint32_t)0x0000002C)
+#define CRYP_CR_ALGOMODE_AES_CTR_ENCRYPT ((uint32_t)0x00000030)
+#define CRYP_CR_ALGOMODE_AES_CTR_DECRYPT ((uint32_t)0x00000034)
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Constants_Group4 CRYP CRYP_Interrupt
+ * @{
+ */
+#define CRYP_IT_INI ((uint32_t)CRYP_IMSCR_INIM) /*!< Input FIFO Interrupt */
+#define CRYP_IT_OUTI ((uint32_t)CRYP_IMSCR_OUTIM) /*!< Output FIFO Interrupt */
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Exported_Constants_Group5 CRYP CRYP_Flags
+ * @{
+ */
+#define CRYP_FLAG_BUSY ((uint32_t)0x00000010) /*!< The CRYP core is currently
+ processing a block of data
+ or a key preparation (for
+ AES decryption). */
+#define CRYP_FLAG_IFEM ((uint32_t)0x00000001) /*!< Input FIFO is empty */
+#define CRYP_FLAG_IFNF ((uint32_t)0x00000002) /*!< Input FIFO is not Full */
+#define CRYP_FLAG_OFNE ((uint32_t)0x00000004) /*!< Output FIFO is not empty */
+#define CRYP_FLAG_OFFU ((uint32_t)0x00000008) /*!< Output FIFO is Full */
+#define CRYP_FLAG_OUTRIS ((uint32_t)0x01000002) /*!< Output FIFO service raw
+ interrupt status */
+#define CRYP_FLAG_INRIS ((uint32_t)0x01000001) /*!< Input FIFO service raw
+ interrupt status */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup CRYP_Exported_Macros CRYP Exported Macros
+ * @{
+ */
+
+/** @brief Reset CRYP handle state
+ * @param __HANDLE__: specifies the CRYP handle.
+ * @retval None
+ */
+#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRYP_STATE_RESET)
+
+/**
+ * @brief Enable/Disable the CRYP peripheral.
+ * @param __HANDLE__: specifies the CRYP handle.
+ * @retval None
+ */
+#define __HAL_CRYP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRYP_CR_CRYPEN)
+#define __HAL_CRYP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~CRYP_CR_CRYPEN)
+
+/**
+ * @brief Flush the data FIFO.
+ * @param __HANDLE__: specifies the CRYP handle.
+ * @retval None
+ */
+#define __HAL_CRYP_FIFO_FLUSH(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRYP_CR_FFLUSH)
+
+/**
+ * @brief Set the algorithm mode: AES-ECB, AES-CBC, AES-CTR, DES-ECB, DES-CBC.
+ * @param __HANDLE__: specifies the CRYP handle.
+ * @param MODE: The algorithm mode.
+ * @retval None
+ */
+#define __HAL_CRYP_SET_MODE(__HANDLE__, MODE) ((__HANDLE__)->Instance->CR |= (uint32_t)(MODE))
+
+/** @brief Check whether the specified CRYP flag is set or not.
+ * @param __HANDLE__: specifies the CRYP handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg CRYP_FLAG_BUSY: The CRYP core is currently processing a block of data
+ * or a key preparation (for AES decryption).
+ * @arg CRYP_FLAG_IFEM: Input FIFO is empty
+ * @arg CRYP_FLAG_IFNF: Input FIFO is not full
+ * @arg CRYP_FLAG_INRIS: Input FIFO service raw interrupt is pending
+ * @arg CRYP_FLAG_OFNE: Output FIFO is not empty
+ * @arg CRYP_FLAG_OFFU: Output FIFO is full
+ * @arg CRYP_FLAG_OUTRIS: Input FIFO service raw interrupt is pending
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+
+#define __HAL_CRYP_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 24)) == 0x01)?((((__HANDLE__)->Instance->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)): \
+ ((((__HANDLE__)->Instance->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)))
+
+/** @brief Check whether the specified CRYP interrupt is set or not.
+ * @param __HANDLE__: specifies the CRYP handle.
+ * @param __INTERRUPT__: specifies the interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg CRYP_IT_INRIS: Input FIFO service raw interrupt is pending
+ * @arg CRYP_IT_OUTRIS: Output FIFO service raw interrupt is pending
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_CRYP_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->MISR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+ * @brief Enable the CRYP interrupt.
+ * @param __HANDLE__: specifies the CRYP handle.
+ * @param __INTERRUPT__: CRYP Interrupt.
+ * @retval None
+ */
+#define __HAL_CRYP_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IMSCR) |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the CRYP interrupt.
+ * @param __HANDLE__: specifies the CRYP handle.
+ * @param __INTERRUPT__: CRYP interrupt.
+ * @retval None
+ */
+#define __HAL_CRYP_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IMSCR) &= ~(__INTERRUPT__))
+
+/**
+ * @}
+ */
+
+/* Include CRYP HAL Extension module */
+#include "stm32f4xx_hal_cryp_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CRYP_Exported_Functions CRYP Exported Functions
+ * @{
+ */
+
+/** @addtogroup CRYP_Exported_Functions_Group1
+ * @{
+ */
+HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp);
+HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp);
+/**
+ * @}
+ */
+
+/** @addtogroup CRYP_Exported_Functions_Group2
+ * @{
+ */
+/* AES encryption/decryption using polling ***********************************/
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+
+/* AES encryption/decryption using interrupt *********************************/
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* AES encryption/decryption using DMA ***************************************/
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+/**
+ * @}
+ */
+
+/** @addtogroup CRYP_Exported_Functions_Group3
+ * @{
+ */
+/* DES encryption/decryption using polling ***********************************/
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+
+/* DES encryption/decryption using interrupt *********************************/
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* DES encryption/decryption using DMA ***************************************/
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+/**
+ * @}
+ */
+
+/** @addtogroup CRYP_Exported_Functions_Group4
+ * @{
+ */
+/* TDES encryption/decryption using polling **********************************/
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+
+/* TDES encryption/decryption using interrupt ********************************/
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* TDES encryption/decryption using DMA **************************************/
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+/**
+ * @}
+ */
+
+/** @addtogroup CRYP_Exported_Functions_Group5
+ * @{
+ */
+void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp);
+/**
+ * @}
+ */
+
+/** @addtogroup CRYP_Exported_Functions_Group6
+ * @{
+ */
+void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp);
+/**
+ * @}
+ */
+
+/** @addtogroup CRYP_Exported_Functions_Group7
+ * @{
+ */
+HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup CRYP_Private_Types CRYP Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CRYP_Private_Variables CRYP Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CRYP_Private_Constants CRYP Private Constants
+ * @{
+ */
+#define CRYP_FLAG_MASK ((uint32_t)0x0000001F)
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CRYP_Private_Macros CRYP Private Macros
+ * @{
+ */
+
+#define IS_CRYP_KEYSIZE(__KEYSIZE__) (((__KEYSIZE__) == CRYP_KEYSIZE_128B) || \
+ ((__KEYSIZE__) == CRYP_KEYSIZE_192B) || \
+ ((__KEYSIZE__) == CRYP_KEYSIZE_256B))
+
+
+#define IS_CRYP_DATATYPE(__DATATYPE__) (((__DATATYPE__) == CRYP_DATATYPE_32B) || \
+ ((__DATATYPE__) == CRYP_DATATYPE_16B) || \
+ ((__DATATYPE__) == CRYP_DATATYPE_8B) || \
+ ((__DATATYPE__) == CRYP_DATATYPE_1B))
+
+
+ /**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CRYP_Private_Functions CRYP Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F415xx || STM32F417xx || STM32F437xx || STM32F439xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CRYP_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_cryp_ex.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,221 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_cryp_ex.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of CRYP HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CRYP_EX_H
+#define __STM32F4xx_HAL_CRYP_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F437xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CRYPEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CRYPEx_Exported_Constants CRYPEx Exported Constants
+ * @{
+ */
+
+/** @defgroup CRYPEx_Exported_Constants_Group1 CRYP AlgoModeDirection
+ * @{
+ */
+#define CRYP_CR_ALGOMODE_AES_GCM_ENCRYPT ((uint32_t)0x00080000)
+#define CRYP_CR_ALGOMODE_AES_GCM_DECRYPT ((uint32_t)0x00080004)
+#define CRYP_CR_ALGOMODE_AES_CCM_ENCRYPT ((uint32_t)0x00080008)
+#define CRYP_CR_ALGOMODE_AES_CCM_DECRYPT ((uint32_t)0x0008000C)
+
+/**
+ * @}
+ */
+
+/** @defgroup CRYPEx_Exported_Constants_Group3 CRYP PhaseConfig
+ * @brief The phases are relevant only to AES-GCM and AES-CCM
+ * @{
+ */
+#define CRYP_PHASE_INIT ((uint32_t)0x00000000)
+#define CRYP_PHASE_HEADER CRYP_CR_GCM_CCMPH_0
+#define CRYP_PHASE_PAYLOAD CRYP_CR_GCM_CCMPH_1
+#define CRYP_PHASE_FINAL CRYP_CR_GCM_CCMPH
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup CRYPEx_Exported_Macros CRYP Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Set the phase: Init, header, payload, final.
+ * This is relevant only for GCM and CCM modes.
+ * @param __HANDLE__: specifies the CRYP handle.
+ * @param __PHASE__: The phase.
+ * @retval None
+ */
+#define __HAL_CRYP_SET_PHASE(__HANDLE__, __PHASE__) do{(__HANDLE__)->Instance->CR &= (uint32_t)(~CRYP_CR_GCM_CCMPH);\
+ (__HANDLE__)->Instance->CR |= (uint32_t)(__PHASE__);\
+ }while(0)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup CRYPEx_Exported_Functions CRYPEx Exported Functions
+ * @{
+ */
+
+/** @addtogroup CRYPEx_Exported_Functions_Group1
+ * @{
+ */
+
+/* AES encryption/decryption using polling ***********************************/
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Finish(CRYP_HandleTypeDef *hcryp, uint32_t Size, uint8_t *AuthTag, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Finish(CRYP_HandleTypeDef *hcryp, uint8_t *AuthTag, uint32_t Timeout);
+
+/* AES encryption/decryption using interrupt *********************************/
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* AES encryption/decryption using DMA ***************************************/
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/**
+ * @}
+ */
+
+/** @addtogroup CRYPEx_Exported_Functions_Group2
+ * @{
+ */
+
+void HAL_CRYPEx_GCMCCM_IRQHandler(CRYP_HandleTypeDef *hcryp);
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+
+ /* Private types -------------------------------------------------------------*/
+/** @defgroup CRYPEx_Private_Types CRYPEx Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup CRYPEx_Private_Variables CRYPEx Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup CRYPEx_Private_Constants CRYPEx Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup CRYPEx_Private_Macros CRYPEx Private Macros
+ * @{
+ */
+
+ /**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup CRYPEx_Private_Functions CRYPEx Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F437xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CRYP_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_dac.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,412 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dac.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of DAC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DAC_H
+#define __STM32F4xx_HAL_DAC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DAC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DAC_Exported_Types DAC Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_DAC_STATE_RESET = 0x00, /*!< DAC not yet initialized or disabled */
+ HAL_DAC_STATE_READY = 0x01, /*!< DAC initialized and ready for use */
+ HAL_DAC_STATE_BUSY = 0x02, /*!< DAC internal processing is ongoing */
+ HAL_DAC_STATE_TIMEOUT = 0x03, /*!< DAC timeout state */
+ HAL_DAC_STATE_ERROR = 0x04 /*!< DAC error state */
+}HAL_DAC_StateTypeDef;
+
+/**
+ * @brief DAC handle Structure definition
+ */
+typedef struct
+{
+ DAC_TypeDef *Instance; /*!< Register base address */
+
+ __IO HAL_DAC_StateTypeDef State; /*!< DAC communication state */
+
+ HAL_LockTypeDef Lock; /*!< DAC locking object */
+
+ DMA_HandleTypeDef *DMA_Handle1; /*!< Pointer DMA handler for channel 1 */
+
+ DMA_HandleTypeDef *DMA_Handle2; /*!< Pointer DMA handler for channel 2 */
+
+ __IO uint32_t ErrorCode; /*!< DAC Error code */
+
+}DAC_HandleTypeDef;
+
+/**
+ * @brief DAC Configuration regular Channel structure definition
+ */
+typedef struct
+{
+ uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel.
+ This parameter can be a value of @ref DAC_trigger_selection */
+
+ uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled.
+ This parameter can be a value of @ref DAC_output_buffer */
+}DAC_ChannelConfTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DAC_Exported_Constants DAC Exported Constants
+ * @{
+ */
+
+/** @defgroup DAC_Error_Code DAC Error Code
+ * @{
+ */
+#define HAL_DAC_ERROR_NONE 0x00 /*!< No error */
+#define HAL_DAC_ERROR_DMAUNDERRUNCH1 0x01 /*!< DAC channel1 DAM underrun error */
+#define HAL_DAC_ERROR_DMAUNDERRUNCH2 0x02 /*!< DAC channel2 DAM underrun error */
+#define HAL_DAC_ERROR_DMA 0x04 /*!< DMA error */
+/**
+ * @}
+ */
+
+/** @defgroup DAC_trigger_selection DAC Trigger Selection
+ * @{
+ */
+
+#define DAC_TRIGGER_NONE ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
+ has been loaded, and not by external trigger */
+#define DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T4_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T5_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T6_TRGO ((uint32_t)DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T7_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T8_TRGO ((uint32_t)(DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel */
+
+#define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */
+/**
+ * @}
+ */
+
+/** @defgroup DAC_output_buffer DAC Output Buffer
+ * @{
+ */
+#define DAC_OUTPUTBUFFER_ENABLE ((uint32_t)0x00000000)
+#define DAC_OUTPUTBUFFER_DISABLE ((uint32_t)DAC_CR_BOFF1)
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Channel_selection DAC Channel Selection
+ * @{
+ */
+#define DAC_CHANNEL_1 ((uint32_t)0x00000000)
+#define DAC_CHANNEL_2 ((uint32_t)0x00000010)
+/**
+ * @}
+ */
+
+/** @defgroup DAC_data_alignment DAC Data Alignment
+ * @{
+ */
+#define DAC_ALIGN_12B_R ((uint32_t)0x00000000)
+#define DAC_ALIGN_12B_L ((uint32_t)0x00000004)
+#define DAC_ALIGN_8B_R ((uint32_t)0x00000008)
+/**
+ * @}
+ */
+
+/** @defgroup DAC_flags_definition DAC Flags Definition
+ * @{
+ */
+#define DAC_FLAG_DMAUDR1 ((uint32_t)DAC_SR_DMAUDR1)
+#define DAC_FLAG_DMAUDR2 ((uint32_t)DAC_SR_DMAUDR2)
+/**
+ * @}
+ */
+
+/** @defgroup DAC_IT_definition DAC IT Definition
+ * @{
+ */
+#define DAC_IT_DMAUDR1 ((uint32_t)DAC_SR_DMAUDR1)
+#define DAC_IT_DMAUDR2 ((uint32_t)DAC_SR_DMAUDR2)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup DAC_Exported_Macros DAC Exported Macros
+ * @{
+ */
+
+/** @brief Reset DAC handle state
+ * @param __HANDLE__: specifies the DAC handle.
+ * @retval None
+ */
+#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DAC_STATE_RESET)
+
+/** @brief Enable the DAC channel
+ * @param __HANDLE__: specifies the DAC handle.
+ * @param __DAC_Channel__: specifies the DAC channel
+ * @retval None
+ */
+#define __HAL_DAC_ENABLE(__HANDLE__, __DAC_Channel__) ((__HANDLE__)->Instance->CR |= (DAC_CR_EN1 << (__DAC_Channel__)))
+
+/** @brief Disable the DAC channel
+ * @param __HANDLE__: specifies the DAC handle
+ * @param __DAC_Channel__: specifies the DAC channel.
+ * @retval None
+ */
+#define __HAL_DAC_DISABLE(__HANDLE__, __DAC_Channel__) ((__HANDLE__)->Instance->CR &= ~(DAC_CR_EN1 << (__DAC_Channel__)))
+
+/** @brief Enable the DAC interrupt
+ * @param __HANDLE__: specifies the DAC handle
+ * @param __INTERRUPT__: specifies the DAC interrupt.
+ * @retval None
+ */
+#define __HAL_DAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__))
+
+/** @brief Disable the DAC interrupt
+ * @param __HANDLE__: specifies the DAC handle
+ * @param __INTERRUPT__: specifies the DAC interrupt.
+ * @retval None
+ */
+#define __HAL_DAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__))
+
+/** @brief Checks if the specified DAC interrupt source is enabled or disabled.
+ * @param __HANDLE__: DAC handle
+ * @param __INTERRUPT__: DAC interrupt source to check
+ * This parameter can be any combination of the following values:
+ * @arg DAC_IT_DMAUDR1: DAC channel 1 DMA underrun interrupt
+ * @arg DAC_IT_DMAUDR2: DAC channel 2 DMA underrun interrupt
+ * @retval State of interruption (SET or RESET)
+ */
+#define __HAL_DAC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/** @brief Get the selected DAC's flag status.
+ * @param __HANDLE__: specifies the DAC handle.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DAC_FLAG_DMAUDR1: DMA underrun 1 flag
+ * @arg DAC_FLAG_DMAUDR2: DMA underrun 2 flag
+ * @retval None
+ */
+#define __HAL_DAC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the DAC's flag.
+ * @param __HANDLE__: specifies the DAC handle.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DAC_FLAG_DMAUDR1: DMA underrun 1 flag
+ * @arg DAC_FLAG_DMAUDR2: DMA underrun 2 flag
+ * @retval None
+ */
+#define __HAL_DAC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = (__FLAG__))
+/**
+ * @}
+ */
+
+/* Include DAC HAL Extension module */
+#include "stm32f4xx_hal_dac_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DAC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup DAC_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions *********************************/
+HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef* hdac);
+HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef* hdac);
+void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac);
+void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac);
+/**
+ * @}
+ */
+
+/** @addtogroup DAC_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ****************************************************/
+HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef* hdac, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t* pData, uint32_t Length, uint32_t Alignment);
+HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel);
+uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup DAC_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data);
+/**
+ * @}
+ */
+
+/** @addtogroup DAC_Exported_Functions_Group4
+ * @{
+ */
+/* Peripheral State functions *************************************************/
+HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef* hdac);
+void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac);
+uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac);
+
+void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef* hdac);
+void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef* hdac);
+void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac);
+void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup DAC_Private_Constants DAC Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DAC_Private_Macros DAC Private Macros
+ * @{
+ */
+#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0)
+#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_ALIGN_12B_R) || \
+ ((ALIGN) == DAC_ALIGN_12B_L) || \
+ ((ALIGN) == DAC_ALIGN_8B_R))
+#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1) || \
+ ((CHANNEL) == DAC_CHANNEL_2))
+#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OUTPUTBUFFER_ENABLE) || \
+ ((STATE) == DAC_OUTPUTBUFFER_DISABLE))
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
+ ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T8_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T5_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T4_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+ ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+
+/** @brief Set DHR12R1 alignment
+ * @param __ALIGNMENT__: specifies the DAC alignment
+ * @retval None
+ */
+#define DAC_DHR12R1_ALIGNMENT(__ALIGNMENT__) (((uint32_t)0x00000008) + (__ALIGNMENT__))
+
+/** @brief Set DHR12R2 alignment
+ * @param __ALIGNMENT__: specifies the DAC alignment
+ * @retval None
+ */
+#define DAC_DHR12R2_ALIGNMENT(__ALIGNMENT__) (((uint32_t)0x00000014) + (__ALIGNMENT__))
+
+/** @brief Set DHR12RD alignment
+ * @param __ALIGNMENT__: specifies the DAC alignment
+ * @retval None
+ */
+#define DAC_DHR12RD_ALIGNMENT(__ALIGNMENT__) (((uint32_t)0x00000020) + (__ALIGNMENT__))
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DAC_Private_Functions DAC Private Functions
+ * @{
+ */
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+ STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
+ STM32F446xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_HAL_DAC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_dac_ex.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,199 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dac.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of DAC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DAC_EX_H
+#define __STM32F4xx_HAL_DAC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DACEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DACEx_Exported_Constants DAC Exported Constants
+ * @{
+ */
+
+/** @defgroup DACEx_lfsrunmask_triangleamplitude DAC LFS Run Mask Triangle Amplitude
+ * @{
+ */
+#define DAC_LFSRUNMASK_BIT0 ((uint32_t)0x00000000) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */
+#define DAC_LFSRUNMASK_BITS1_0 ((uint32_t)DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS2_0 ((uint32_t)DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS3_0 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0)/*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS4_0 ((uint32_t)DAC_CR_MAMP1_2) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS5_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS6_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS7_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS8_0 ((uint32_t)DAC_CR_MAMP1_3) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS9_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS10_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS11_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */
+#define DAC_TRIANGLEAMPLITUDE_1 ((uint32_t)0x00000000) /*!< Select max triangle amplitude of 1 */
+#define DAC_TRIANGLEAMPLITUDE_3 ((uint32_t)DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 3 */
+#define DAC_TRIANGLEAMPLITUDE_7 ((uint32_t)DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 7 */
+#define DAC_TRIANGLEAMPLITUDE_15 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 15 */
+#define DAC_TRIANGLEAMPLITUDE_31 ((uint32_t)DAC_CR_MAMP1_2) /*!< Select max triangle amplitude of 31 */
+#define DAC_TRIANGLEAMPLITUDE_63 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 63 */
+#define DAC_TRIANGLEAMPLITUDE_127 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 127 */
+#define DAC_TRIANGLEAMPLITUDE_255 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 255 */
+#define DAC_TRIANGLEAMPLITUDE_511 ((uint32_t)DAC_CR_MAMP1_3) /*!< Select max triangle amplitude of 511 */
+#define DAC_TRIANGLEAMPLITUDE_1023 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 1023 */
+#define DAC_TRIANGLEAMPLITUDE_2047 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 2047 */
+#define DAC_TRIANGLEAMPLITUDE_4095 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 4095 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DACEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup DACEx_Exported_Functions_Group1
+ * @{
+ */
+/* Extension features functions ***********************************************/
+uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac);
+HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude);
+HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude);
+HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2);
+
+void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef* hdac);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup DACEx_Private_Constants DAC Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DACEx_Private_Macros DAC Private Macros
+ * @{
+ */
+#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUNMASK_BIT0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS1_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS2_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS3_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS4_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS5_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS6_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS7_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS8_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS9_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS10_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS11_0) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_1) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_3) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_7) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_15) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_31) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_63) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_127) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_255) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_511) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_1023) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_2047) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_4095))
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DACEx_Private_Functions DAC Private Functions
+ * @{
+ */
+void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma);
+void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma);
+void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+ STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
+ STM32F446xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_HAL_DAC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_dcmi.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,515 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dcmi.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of DCMI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DCMI_H
+#define __STM32F4xx_HAL_DCMI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) ||\
+ defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/* Include DCMI HAL Extended module */
+/* (include on top of file since DCMI structures are defined in extended file) */
+#include "stm32f4xx_hal_dcmi_ex.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DCMI DCMI
+ * @brief DCMI HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DCMI_Exported_Types DCMI Exported Types
+ * @{
+ */
+/**
+ * @brief DCMI Error source
+ */
+typedef enum
+{
+ DCMI_ERROR_SYNC = 1, /*!< Synchronisation error */
+ DCMI_OVERRUN = 2, /*!< DCMI Overrun */
+}DCMI_ErrorTypeDef;
+
+
+/**
+ * @brief HAL DCMI State structures definition
+ */
+typedef enum
+{
+ HAL_DCMI_STATE_RESET = 0x00, /*!< DCMI not yet initialized or disabled */
+ HAL_DCMI_STATE_READY = 0x01, /*!< DCMI initialized and ready for use */
+ HAL_DCMI_STATE_BUSY = 0x02, /*!< DCMI internal processing is ongoing */
+ HAL_DCMI_STATE_TIMEOUT = 0x03, /*!< DCMI timeout state */
+ HAL_DCMI_STATE_ERROR = 0x04 /*!< DCMI error state */
+}HAL_DCMI_StateTypeDef;
+
+/**
+ * @brief DCMI handle Structure definition
+ */
+typedef struct
+{
+ DCMI_TypeDef *Instance; /*!< DCMI Register base address */
+
+ DCMI_InitTypeDef Init; /*!< DCMI parameters */
+
+ HAL_LockTypeDef Lock; /*!< DCMI locking object */
+
+ __IO HAL_DCMI_StateTypeDef State; /*!< DCMI state */
+
+ __IO uint32_t XferCount; /*!< DMA transfer counter */
+
+ __IO uint32_t XferSize; /*!< DMA transfer size */
+
+ uint32_t XferTransferNumber; /*!< DMA transfer number */
+
+ uint32_t pBuffPtr; /*!< Pointer to DMA output buffer */
+
+ DMA_HandleTypeDef *DMA_Handle; /*!< Pointer to the DMA handler */
+
+ __IO uint32_t ErrorCode; /*!< DCMI Error code */
+
+}DCMI_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DCMI_Exported_Constants DCMI Exported Constants
+ * @{
+ */
+
+/** @defgroup DCMI_Error_Code DCMI Error Code
+ * @{
+ */
+#define HAL_DCMI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_DCMI_ERROR_OVF ((uint32_t)0x00000001) /*!< Overflow error */
+#define HAL_DCMI_ERROR_SYNC ((uint32_t)0x00000002) /*!< Synchronization error */
+#define HAL_DCMI_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Capture_Mode DCMI Capture Mode
+ * @{
+ */
+#define DCMI_MODE_CONTINUOUS ((uint32_t)0x00000000) /*!< The received data are transferred continuously
+ into the destination memory through the DMA */
+#define DCMI_MODE_SNAPSHOT ((uint32_t)DCMI_CR_CM) /*!< Once activated, the interface waits for the start of
+ frame and then transfers a single frame through the DMA */
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Synchronization_Mode DCMI Synchronization Mode
+ * @{
+ */
+#define DCMI_SYNCHRO_HARDWARE ((uint32_t)0x00000000) /*!< Hardware synchronization data capture (frame/line start/stop)
+ is synchronized with the HSYNC/VSYNC signals */
+#define DCMI_SYNCHRO_EMBEDDED ((uint32_t)DCMI_CR_ESS) /*!< Embedded synchronization data capture is synchronized with
+ synchronization codes embedded in the data flow */
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_PIXCK_Polarity DCMI PIXCK Polarity
+ * @{
+ */
+#define DCMI_PCKPOLARITY_FALLING ((uint32_t)0x00000000) /*!< Pixel clock active on Falling edge */
+#define DCMI_PCKPOLARITY_RISING ((uint32_t)DCMI_CR_PCKPOL) /*!< Pixel clock active on Rising edge */
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_VSYNC_Polarity DCMI VSYNC Polarity
+ * @{
+ */
+#define DCMI_VSPOLARITY_LOW ((uint32_t)0x00000000) /*!< Vertical synchronization active Low */
+#define DCMI_VSPOLARITY_HIGH ((uint32_t)DCMI_CR_VSPOL) /*!< Vertical synchronization active High */
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_HSYNC_Polarity DCMI HSYNC Polarity
+ * @{
+ */
+#define DCMI_HSPOLARITY_LOW ((uint32_t)0x00000000) /*!< Horizontal synchronization active Low */
+#define DCMI_HSPOLARITY_HIGH ((uint32_t)DCMI_CR_HSPOL) /*!< Horizontal synchronization active High */
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_MODE_JPEG DCMI MODE JPEG
+ * @{
+ */
+#define DCMI_JPEG_DISABLE ((uint32_t)0x00000000) /*!< Mode JPEG Disabled */
+#define DCMI_JPEG_ENABLE ((uint32_t)DCMI_CR_JPEG) /*!< Mode JPEG Enabled */
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Capture_Rate DCMI Capture Rate
+ * @{
+ */
+#define DCMI_CR_ALL_FRAME ((uint32_t)0x00000000) /*!< All frames are captured */
+#define DCMI_CR_ALTERNATE_2_FRAME ((uint32_t)DCMI_CR_FCRC_0) /*!< Every alternate frame captured */
+#define DCMI_CR_ALTERNATE_4_FRAME ((uint32_t)DCMI_CR_FCRC_1) /*!< One frame in 4 frames captured */
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Extended_Data_Mode DCMI Extended Data Mode
+ * @{
+ */
+#define DCMI_EXTEND_DATA_8B ((uint32_t)0x00000000) /*!< Interface captures 8-bit data on every pixel clock */
+#define DCMI_EXTEND_DATA_10B ((uint32_t)DCMI_CR_EDM_0) /*!< Interface captures 10-bit data on every pixel clock */
+#define DCMI_EXTEND_DATA_12B ((uint32_t)DCMI_CR_EDM_1) /*!< Interface captures 12-bit data on every pixel clock */
+#define DCMI_EXTEND_DATA_14B ((uint32_t)(DCMI_CR_EDM_0 | DCMI_CR_EDM_1)) /*!< Interface captures 14-bit data on every pixel clock */
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Window_Coordinate DCMI Window Coordinate
+ * @{
+ */
+#define DCMI_WINDOW_COORDINATE ((uint32_t)0x3FFF) /*!< Window coordinate */
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Window_Height DCMI Window Height
+ * @{
+ */
+#define DCMI_WINDOW_HEIGHT ((uint32_t)0x1FFF) /*!< Window Height */
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_interrupt_sources DCMI interrupt sources
+ * @{
+ */
+#define DCMI_IT_FRAME ((uint32_t)DCMI_IER_FRAME_IE)
+#define DCMI_IT_OVF ((uint32_t)DCMI_IER_OVF_IE)
+#define DCMI_IT_ERR ((uint32_t)DCMI_IER_ERR_IE)
+#define DCMI_IT_VSYNC ((uint32_t)DCMI_IER_VSYNC_IE)
+#define DCMI_IT_LINE ((uint32_t)DCMI_IER_LINE_IE)
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Flags DCMI Flags
+ * @{
+ */
+
+/**
+ * @brief DCMI SR register
+ */
+#define DCMI_FLAG_HSYNC ((uint32_t)0x2001)
+#define DCMI_FLAG_VSYNC ((uint32_t)0x2002)
+#define DCMI_FLAG_FNE ((uint32_t)0x2004)
+/**
+ * @brief DCMI RISR register
+ */
+#define DCMI_FLAG_FRAMERI ((uint32_t)DCMI_RISR_FRAME_RIS)
+#define DCMI_FLAG_OVFRI ((uint32_t)DCMI_RISR_OVF_RIS)
+#define DCMI_FLAG_ERRRI ((uint32_t)DCMI_RISR_ERR_RIS)
+#define DCMI_FLAG_VSYNCRI ((uint32_t)DCMI_RISR_VSYNC_RIS)
+#define DCMI_FLAG_LINERI ((uint32_t)DCMI_RISR_LINE_RIS)
+/**
+ * @brief DCMI MISR register
+ */
+#define DCMI_FLAG_FRAMEMI ((uint32_t)0x1001)
+#define DCMI_FLAG_OVFMI ((uint32_t)0x1002)
+#define DCMI_FLAG_ERRMI ((uint32_t)0x1004)
+#define DCMI_FLAG_VSYNCMI ((uint32_t)0x1008)
+#define DCMI_FLAG_LINEMI ((uint32_t)0x1010)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup DCMI_Exported_Macros DCMI Exported Macros
+ * @{
+ */
+
+/** @brief Reset DCMI handle state
+ * @param __HANDLE__: specifies the DCMI handle.
+ * @retval None
+ */
+#define __HAL_DCMI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DCMI_STATE_RESET)
+
+/**
+ * @brief Enable the DCMI.
+ * @param __HANDLE__: DCMI handle
+ * @retval None
+ */
+#define __HAL_DCMI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DCMI_CR_ENABLE)
+
+/**
+ * @brief Disable the DCMI.
+ * @param __HANDLE__: DCMI handle
+ * @retval None
+ */
+#define __HAL_DCMI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(DCMI_CR_ENABLE))
+
+/* Interrupt & Flag management */
+/**
+ * @brief Get the DCMI pending flags.
+ * @param __HANDLE__: DCMI handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask
+ * @arg DCMI_FLAG_OVFRI: Overflow flag mask
+ * @arg DCMI_FLAG_ERRRI: Synchronization error flag mask
+ * @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask
+ * @arg DCMI_FLAG_LINERI: Line flag mask
+ * @retval The state of FLAG.
+ */
+#define __HAL_DCMI_GET_FLAG(__HANDLE__, __FLAG__)\
+((((__FLAG__) & 0x3000) == 0x0)? ((__HANDLE__)->Instance->RISR & (__FLAG__)) :\
+ (((__FLAG__) & 0x2000) == 0x0)? ((__HANDLE__)->Instance->MISR & (__FLAG__)) : ((__HANDLE__)->Instance->SR & (__FLAG__)))
+
+/**
+ * @brief Clear the DCMI pending flags.
+ * @param __HANDLE__: DCMI handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask
+ * @arg DCMI_FLAG_OVFRI: Overflow flag mask
+ * @arg DCMI_FLAG_ERRRI: Synchronization error flag mask
+ * @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask
+ * @arg DCMI_FLAG_LINERI: Line flag mask
+ * @retval None
+ */
+#define __HAL_DCMI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/**
+ * @brief Enable the specified DCMI interrupts.
+ * @param __HANDLE__: DCMI handle
+ * @param __INTERRUPT__: specifies the DCMI interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
+ * @arg DCMI_IT_OVF: Overflow interrupt mask
+ * @arg DCMI_IT_ERR: Synchronization error interrupt mask
+ * @arg DCMI_IT_VSYNC: VSYNC interrupt mask
+ * @arg DCMI_IT_LINE: Line interrupt mask
+ * @retval None
+ */
+#define __HAL_DCMI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified DCMI interrupts.
+ * @param __HANDLE__: DCMI handle
+ * @param __INTERRUPT__: specifies the DCMI interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
+ * @arg DCMI_IT_OVF: Overflow interrupt mask
+ * @arg DCMI_IT_ERR: Synchronization error interrupt mask
+ * @arg DCMI_IT_VSYNC: VSYNC interrupt mask
+ * @arg DCMI_IT_LINE: Line interrupt mask
+ * @retval None
+ */
+#define __HAL_DCMI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified DCMI interrupt has occurred or not.
+ * @param __HANDLE__: DCMI handle
+ * @param __INTERRUPT__: specifies the DCMI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
+ * @arg DCMI_IT_OVF: Overflow interrupt mask
+ * @arg DCMI_IT_ERR: Synchronization error interrupt mask
+ * @arg DCMI_IT_VSYNC: VSYNC interrupt mask
+ * @arg DCMI_IT_LINE: Line interrupt mask
+ * @retval The state of INTERRUPT.
+ */
+#define __HAL_DCMI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MISR & (__INTERRUPT__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DCMI_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup DCMI_Exported_Functions_Group1
+ * @{
+ */
+
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi);
+HAL_StatusTypeDef HAL_DCMI_DeInit(DCMI_HandleTypeDef *hdcmi);
+void HAL_DCMI_MspInit(DCMI_HandleTypeDef* hdcmi);
+void HAL_DCMI_MspDeInit(DCMI_HandleTypeDef* hdcmi);
+/**
+ * @}
+ */
+
+/** @addtogroup DCMI_Exported_Functions_Group2
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_DCMI_Start_DMA(DCMI_HandleTypeDef* hdcmi, uint32_t DCMI_Mode, uint32_t pData, uint32_t Length);
+HAL_StatusTypeDef HAL_DCMI_Stop(DCMI_HandleTypeDef* hdcmi);
+void HAL_DCMI_ErrorCallback(DCMI_HandleTypeDef *hdcmi);
+void HAL_DCMI_LineEventCallback(DCMI_HandleTypeDef *hdcmi);
+void HAL_DCMI_FrameEventCallback(DCMI_HandleTypeDef *hdcmi);
+void HAL_DCMI_VsyncEventCallback(DCMI_HandleTypeDef *hdcmi);
+void HAL_DCMI_IRQHandler(DCMI_HandleTypeDef *hdcmi);
+/**
+ * @}
+ */
+
+/** @addtogroup DCMI_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_DCMI_ConfigCROP(DCMI_HandleTypeDef *hdcmi, uint32_t X0, uint32_t Y0, uint32_t XSize, uint32_t YSize);
+HAL_StatusTypeDef HAL_DCMI_EnableCROP(DCMI_HandleTypeDef *hdcmi);
+HAL_StatusTypeDef HAL_DCMI_DisableCROP(DCMI_HandleTypeDef *hdcmi);
+/**
+ * @}
+ */
+
+/** @addtogroup DCMI_Exported_Functions_Group4
+ * @{
+ */
+/* Peripheral State functions *************************************************/
+HAL_DCMI_StateTypeDef HAL_DCMI_GetState(DCMI_HandleTypeDef *hdcmi);
+uint32_t HAL_DCMI_GetError(DCMI_HandleTypeDef *hdcmi);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup DCMI_Private_Macros DCMI Private Macros
+ * @{
+ */
+#define IS_DCMI_CAPTURE_MODE(MODE)(((MODE) == DCMI_MODE_CONTINUOUS) || \
+ ((MODE) == DCMI_MODE_SNAPSHOT))
+
+#define IS_DCMI_SYNCHRO(MODE)(((MODE) == DCMI_SYNCHRO_HARDWARE) || \
+ ((MODE) == DCMI_SYNCHRO_EMBEDDED))
+
+#define IS_DCMI_PCKPOLARITY(POLARITY)(((POLARITY) == DCMI_PCKPOLARITY_FALLING) || \
+ ((POLARITY) == DCMI_PCKPOLARITY_RISING))
+
+#define IS_DCMI_VSPOLARITY(POLARITY)(((POLARITY) == DCMI_VSPOLARITY_LOW) || \
+ ((POLARITY) == DCMI_VSPOLARITY_HIGH))
+
+#define IS_DCMI_HSPOLARITY(POLARITY)(((POLARITY) == DCMI_HSPOLARITY_LOW) || \
+ ((POLARITY) == DCMI_HSPOLARITY_HIGH))
+
+#define IS_DCMI_MODE_JPEG(JPEG_MODE)(((JPEG_MODE) == DCMI_JPEG_DISABLE) || \
+ ((JPEG_MODE) == DCMI_JPEG_ENABLE))
+
+#define IS_DCMI_CAPTURE_RATE(RATE) (((RATE) == DCMI_CR_ALL_FRAME) || \
+ ((RATE) == DCMI_CR_ALTERNATE_2_FRAME) || \
+ ((RATE) == DCMI_CR_ALTERNATE_4_FRAME))
+
+#define IS_DCMI_EXTENDED_DATA(DATA)(((DATA) == DCMI_EXTEND_DATA_8B) || \
+ ((DATA) == DCMI_EXTEND_DATA_10B) || \
+ ((DATA) == DCMI_EXTEND_DATA_12B) || \
+ ((DATA) == DCMI_EXTEND_DATA_14B))
+
+#define IS_DCMI_WINDOW_COORDINATE(COORDINATE) ((COORDINATE) <= DCMI_WINDOW_COORDINATE)
+
+#define IS_DCMI_WINDOW_HEIGHT(HEIGHT) ((HEIGHT) <= DCMI_WINDOW_HEIGHT)
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @addtogroup DCMI_Private_Functions DCMI Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+ STM32F429xx || STM32F439xx || STM32F446xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_DCMI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_dcmi_ex.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,221 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dcmi_ex.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of DCMI Extension HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DCMI_EX_H
+#define __STM32F4xx_HAL_DCMI_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) ||\
+ defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DCMIEx DCMI Extended
+ * @brief DCMI HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DCMIEx_Exported_Types DCMI Extende Exported Types
+ * @{
+ */
+/**
+ * @brief DCMIEx Embedded Synchronisation CODE Init structure definition
+ */
+typedef struct
+{
+ uint8_t FrameStartCode; /*!< Specifies the code of the frame start delimiter. */
+ uint8_t LineStartCode; /*!< Specifies the code of the line start delimiter. */
+ uint8_t LineEndCode; /*!< Specifies the code of the line end delimiter. */
+ uint8_t FrameEndCode; /*!< Specifies the code of the frame end delimiter. */
+}DCMI_CodesInitTypeDef;
+
+/**
+ * @brief DCMI Init structure definition
+ */
+typedef struct
+{
+ uint32_t SynchroMode; /*!< Specifies the Synchronization Mode: Hardware or Embedded.
+ This parameter can be a value of @ref DCMI_Synchronization_Mode */
+
+ uint32_t PCKPolarity; /*!< Specifies the Pixel clock polarity: Falling or Rising.
+ This parameter can be a value of @ref DCMI_PIXCK_Polarity */
+
+ uint32_t VSPolarity; /*!< Specifies the Vertical synchronization polarity: High or Low.
+ This parameter can be a value of @ref DCMI_VSYNC_Polarity */
+
+ uint32_t HSPolarity; /*!< Specifies the Horizontal synchronization polarity: High or Low.
+ This parameter can be a value of @ref DCMI_HSYNC_Polarity */
+
+ uint32_t CaptureRate; /*!< Specifies the frequency of frame capture: All, 1/2 or 1/4.
+ This parameter can be a value of @ref DCMI_Capture_Rate */
+
+ uint32_t ExtendedDataMode; /*!< Specifies the data width: 8-bit, 10-bit, 12-bit or 14-bit.
+ This parameter can be a value of @ref DCMI_Extended_Data_Mode */
+
+ DCMI_CodesInitTypeDef SyncroCode; /*!< Specifies the code of the frame start delimiter. */
+
+ uint32_t JPEGMode; /*!< Enable or Disable the JPEG mode.
+ This parameter can be a value of @ref DCMI_MODE_JPEG */
+#if defined(STM32F446xx)
+ uint32_t ByteSelectMode; /*!< Specifies the data to be captured by the interface
+ This parameter can be a value of @ref DCMIEx_Byte_Select_Mode */
+
+ uint32_t ByteSelectStart; /*!< Specifies if the data to be captured by the interface is even or odd
+ This parameter can be a value of @ref DCMIEx_Byte_Select_Start */
+
+ uint32_t LineSelectMode; /*!< Specifies the line of data to be captured by the interface
+ This parameter can be a value of @ref DCMIEx_Line_Select_Mode */
+
+ uint32_t LineSelectStart; /*!< Specifies if the line of data to be captured by the interface is even or odd
+ This parameter can be a value of @ref DCMIEx_Line_Select_Start */
+
+#endif /* STM32F446xx */
+}DCMI_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+#if defined(STM32F446xx)
+/** @defgroup DCMIEx_Exported_Constants DCMI Exported Constants
+ * @{
+ */
+
+/** @defgroup DCMIEx_Byte_Select_Mode DCMI Byte Select Mode
+ * @{
+ */
+#define DCMI_BSM_ALL ((uint32_t)0x00000000) /*!< Interface captures all received data */
+#define DCMI_BSM_OTHER ((uint32_t)DCMI_CR_BSM_0) /*!< Interface captures every other byte from the received data */
+#define DCMI_BSM_ALTERNATE_4 ((uint32_t)DCMI_CR_BSM_1) /*!< Interface captures one byte out of four */
+#define DCMI_BSM_ALTERNATE_2 ((uint32_t)(DCMI_CR_BSM_0 | DCMI_CR_BSM_1)) /*!< Interface captures two bytes out of four */
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMIEx_Byte_Select_Start DCMI Byte Select Start
+ * @{
+ */
+#define DCMI_OEBS_ODD ((uint32_t)0x00000000) /*!< Interface captures first data from the frame/line start, second one being dropped */
+#define DCMI_OEBS_EVEN ((uint32_t)DCMI_CR_OEBS) /*!< Interface captures second data from the frame/line start, first one being dropped */
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMIEx_Line_Select_Mode DCMI Line Select Mode
+ * @{
+ */
+#define DCMI_LSM_ALL ((uint32_t)0x00000000) /*!< Interface captures all received lines */
+#define DCMI_LSM_ALTERNATE_2 ((uint32_t)DCMI_CR_LSM) /*!< Interface captures one line out of two */
+
+/**
+ * @}
+ */
+
+/** @defgroup DCMIEx_Line_Select_Start DCMI Line Select Start
+ * @{
+ */
+#define DCMI_OELS_ODD ((uint32_t)0x00000000) /*!< Interface captures first line from the frame start, second one being dropped */
+#define DCMI_OELS_EVEN ((uint32_t)DCMI_CR_OELS) /*!< Interface captures second line from the frame start, first one being dropped */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+
+/** @defgroup DCMIEx_Private_Macros DCMI Extended Private Macros
+ * @{
+ */
+#define IS_DCMI_BYTE_SELECT_MODE(MODE)(((MODE) == DCMI_BSM_ALL) || \
+ ((MODE) == DCMI_BSM_OTHER) || \
+ ((MODE) == DCMI_BSM_ALTERNATE_4) || \
+ ((MODE) == DCMI_BSM_ALTERNATE_2))
+
+#define IS_DCMI_BYTE_SELECT_START(POLARITY)(((POLARITY) == DCMI_OEBS_ODD) || \
+ ((POLARITY) == DCMI_OEBS_EVEN))
+
+#define IS_DCMI_LINE_SELECT_MODE(MODE)(((MODE) == DCMI_LSM_ALL) || \
+ ((MODE) == DCMI_LSM_ALTERNATE_2))
+
+#define IS_DCMI_LINE_SELECT_START(POLARITY)(((POLARITY) == DCMI_OELS_ODD) || \
+ ((POLARITY) == DCMI_OELS_EVEN))
+#endif /* STM32F446xx */
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+#endif /* STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
+ STM32F429xx || STM32F439xx || STM32F446xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_DCMI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_def.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,217 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_def.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief This file contains HAL common defines, enumeration, macros and
+ * structures definitions.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DEF
+#define __STM32F4xx_HAL_DEF
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx.h"
+#include "stm32_hal_legacy.h"
+#include <stdio.h>
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL Status structures definition
+ */
+typedef enum
+{
+ HAL_OK = 0x00,
+ HAL_ERROR = 0x01,
+ HAL_BUSY = 0x02,
+ HAL_TIMEOUT = 0x03
+} HAL_StatusTypeDef;
+
+/**
+ * @brief HAL Lock structures definition
+ */
+typedef enum
+{
+ HAL_UNLOCKED = 0x00,
+ HAL_LOCKED = 0x01
+} HAL_LockTypeDef;
+
+/* Exported macro ------------------------------------------------------------*/
+//#ifndef NULL
+ #define HAL_NULL (void *) 0
+//#endif
+#define HAL_MAX_DELAY 0xFFFFFFFF
+
+#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) != RESET)
+#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == RESET)
+
+#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \
+ do{ \
+ (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
+ (__DMA_HANDLE__).Parent = (__HANDLE__); \
+ } while(0)
+
+#define UNUSED(x) ((void)(x))
+
+/** @brief Reset the Handle's State field.
+ * @param __HANDLE__: specifies the Peripheral Handle.
+ * @note This macro can be used for the following purpose:
+ * - When the Handle is declared as local variable; before passing it as parameter
+ * to HAL_PPP_Init() for the first time, it is mandatory to use this macro
+ * to set to 0 the Handle's "State" field.
+ * Otherwise, "State" field may have any random value and the first time the function
+ * HAL_PPP_Init() is called, the low level hardware initialization will be missed
+ * (i.e. HAL_PPP_MspInit() will not be executed).
+ * - When there is a need to reconfigure the low level hardware: instead of calling
+ * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
+ * In this later function, when the Handle's "State" field is set to 0, it will execute the function
+ * HAL_PPP_MspInit() which will reconfigure the low level hardware.
+ * @retval None
+ */
+#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0)
+
+#if (USE_RTOS == 1)
+ /* Reserved for future use */
+ #error USE_RTOS should be 0 in the current HAL release
+#else
+ #define __HAL_LOCK(__HANDLE__) \
+ do{ \
+ if((__HANDLE__)->Lock == HAL_LOCKED) \
+ { \
+ return HAL_BUSY; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Lock = HAL_LOCKED; \
+ } \
+ }while (0)
+
+ #define __HAL_UNLOCK(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Lock = HAL_UNLOCKED; \
+ }while (0)
+#endif /* USE_RTOS */
+
+#if defined ( __GNUC__ )
+ #ifndef __weak
+ #define __weak __attribute__((weak))
+ #endif /* __weak */
+ #ifndef __packed
+ #define __packed __attribute__((__packed__))
+ #endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
+#if defined (__GNUC__) /* GNU Compiler */
+ #ifndef __ALIGN_END
+ #define __ALIGN_END __attribute__ ((aligned (4)))
+ #endif /* __ALIGN_END */
+ #ifndef __ALIGN_BEGIN
+ #define __ALIGN_BEGIN
+ #endif /* __ALIGN_BEGIN */
+#else
+ #ifndef __ALIGN_END
+ #define __ALIGN_END
+ #endif /* __ALIGN_END */
+ #ifndef __ALIGN_BEGIN
+ #if defined (__CC_ARM) /* ARM Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #elif defined (__ICCARM__) /* IAR Compiler */
+ #define __ALIGN_BEGIN
+ #endif /* __CC_ARM */
+ #endif /* __ALIGN_BEGIN */
+#endif /* __GNUC__ */
+
+
+/**
+ * @brief __RAM_FUNC definition
+ */
+#if defined ( __CC_ARM )
+/* ARM Compiler
+ ------------
+ RAM functions are defined using the toolchain options.
+ Functions that are executed in RAM should reside in a separate source module.
+ Using the 'Options for File' dialog you can simply change the 'Code / Const'
+ area of a module to a memory space in physical RAM.
+ Available memory areas are declared in the 'Target' tab of the 'Options for Target'
+ dialog.
+*/
+#define __RAM_FUNC HAL_StatusTypeDef
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+ ---------------
+ RAM functions are defined using a specific toolchain keyword "__ramfunc".
+*/
+#define __RAM_FUNC __ramfunc HAL_StatusTypeDef
+
+#elif defined ( __GNUC__ )
+/* GNU Compiler
+ ------------
+ RAM functions are defined using a specific toolchain attribute
+ "__attribute__((section(".RamFunc")))".
+*/
+#define __RAM_FUNC HAL_StatusTypeDef __attribute__((section(".RamFunc")))
+
+#endif
+
+/**
+ * @brief __NOINLINE definition
+ */
+#if defined ( __CC_ARM ) || defined ( __GNUC__ )
+/* ARM & GNUCompiler
+ ----------------
+*/
+#define __NOINLINE __attribute__ ( (noinline) )
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+ ---------------
+*/
+#define __NOINLINE _Pragma("optimize = no_inline")
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32F4xx_HAL_DEF */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_dma.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,767 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dma.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of DMA HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DMA_H
+#define __STM32F4xx_HAL_DMA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMA
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Types DMA Exported Types
+ * @brief DMA Exported Types
+ * @{
+ */
+
+/**
+ * @brief DMA Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Channel; /*!< Specifies the channel used for the specified stream.
+ This parameter can be a value of @ref DMA_Channel_selection */
+
+ uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
+ from memory to memory or from peripheral to memory.
+ This parameter can be a value of @ref DMA_Data_transfer_direction */
+
+ uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Peripheral_incremented_mode */
+
+ uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Memory_incremented_mode */
+
+ uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width.
+ This parameter can be a value of @ref DMA_Peripheral_data_size */
+
+ uint32_t MemDataAlignment; /*!< Specifies the Memory data width.
+ This parameter can be a value of @ref DMA_Memory_data_size */
+
+ uint32_t Mode; /*!< Specifies the operation mode of the DMAy Streamx.
+ This parameter can be a value of @ref DMA_mode
+ @note The circular buffer mode cannot be used if the memory-to-memory
+ data transfer is configured on the selected Stream */
+
+ uint32_t Priority; /*!< Specifies the software priority for the DMAy Streamx.
+ This parameter can be a value of @ref DMA_Priority_level */
+
+ uint32_t FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream.
+ This parameter can be a value of @ref DMA_FIFO_direct_mode
+ @note The Direct mode (FIFO mode disabled) cannot be used if the
+ memory-to-memory data transfer is configured on the selected stream */
+
+ uint32_t FIFOThreshold; /*!< Specifies the FIFO threshold level.
+ This parameter can be a value of @ref DMA_FIFO_threshold_level */
+
+ uint32_t MemBurst; /*!< Specifies the Burst transfer configuration for the memory transfers.
+ It specifies the amount of data to be transferred in a single non interruptible
+ transaction.
+ This parameter can be a value of @ref DMA_Memory_burst
+ @note The burst mode is possible only if the address Increment mode is enabled. */
+
+ uint32_t PeriphBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers.
+ It specifies the amount of data to be transferred in a single non interruptable
+ transaction.
+ This parameter can be a value of @ref DMA_Peripheral_burst
+ @note The burst mode is possible only if the address Increment mode is enabled. */
+}DMA_InitTypeDef;
+
+
+/**
+ * @brief HAL DMA State structures definition
+ */
+typedef enum
+{
+ HAL_DMA_STATE_RESET = 0x00, /*!< DMA not yet initialized or disabled */
+ HAL_DMA_STATE_READY = 0x01, /*!< DMA initialized and ready for use */
+ HAL_DMA_STATE_READY_MEM0 = 0x11, /*!< DMA Mem0 process success */
+ HAL_DMA_STATE_READY_MEM1 = 0x21, /*!< DMA Mem1 process success */
+ HAL_DMA_STATE_READY_HALF_MEM0 = 0x31, /*!< DMA Mem0 Half process success */
+ HAL_DMA_STATE_READY_HALF_MEM1 = 0x41, /*!< DMA Mem1 Half process success */
+ HAL_DMA_STATE_BUSY = 0x02, /*!< DMA process is ongoing */
+ HAL_DMA_STATE_BUSY_MEM0 = 0x12, /*!< DMA Mem0 process is ongoing */
+ HAL_DMA_STATE_BUSY_MEM1 = 0x22, /*!< DMA Mem1 process is ongoing */
+ HAL_DMA_STATE_TIMEOUT = 0x03, /*!< DMA timeout state */
+ HAL_DMA_STATE_ERROR = 0x04, /*!< DMA error state */
+}HAL_DMA_StateTypeDef;
+
+/**
+ * @brief HAL DMA Error Code structure definition
+ */
+typedef enum
+{
+ HAL_DMA_FULL_TRANSFER = 0x00, /*!< Full transfer */
+ HAL_DMA_HALF_TRANSFER = 0x01, /*!< Half Transfer */
+}HAL_DMA_LevelCompleteTypeDef;
+
+/**
+ * @brief DMA handle Structure definition
+ */
+typedef struct __DMA_HandleTypeDef
+{
+ DMA_Stream_TypeDef *Instance; /*!< Register base address */
+
+ DMA_InitTypeDef Init; /*!< DMA communication parameters */
+
+ HAL_LockTypeDef Lock; /*!< DMA locking object */
+
+ __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */
+
+ void *Parent; /*!< Parent object state */
+
+ void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */
+
+ void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */
+
+ void (* XferM1CpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete Memory1 callback */
+
+ void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */
+
+ __IO uint32_t ErrorCode; /*!< DMA Error code */
+}DMA_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Constants DMA Exported Constants
+ * @brief DMA Exported constants
+ * @{
+ */
+
+/** @defgroup DMA_Error_Code DMA Error Code
+ * @brief DMA Error Code
+ * @{
+ */
+#define HAL_DMA_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_DMA_ERROR_TE ((uint32_t)0x00000001) /*!< Transfer error */
+#define HAL_DMA_ERROR_FE ((uint32_t)0x00000002) /*!< FIFO error */
+#define HAL_DMA_ERROR_DME ((uint32_t)0x00000004) /*!< Direct Mode error */
+#define HAL_DMA_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Channel_selection DMA Channel selection
+ * @brief DMA channel selection
+ * @{
+ */
+#define DMA_CHANNEL_0 ((uint32_t)0x00000000) /*!< DMA Channel 0 */
+#define DMA_CHANNEL_1 ((uint32_t)0x02000000) /*!< DMA Channel 1 */
+#define DMA_CHANNEL_2 ((uint32_t)0x04000000) /*!< DMA Channel 2 */
+#define DMA_CHANNEL_3 ((uint32_t)0x06000000) /*!< DMA Channel 3 */
+#define DMA_CHANNEL_4 ((uint32_t)0x08000000) /*!< DMA Channel 4 */
+#define DMA_CHANNEL_5 ((uint32_t)0x0A000000) /*!< DMA Channel 5 */
+#define DMA_CHANNEL_6 ((uint32_t)0x0C000000) /*!< DMA Channel 6 */
+#define DMA_CHANNEL_7 ((uint32_t)0x0E000000) /*!< DMA Channel 7 */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction
+ * @brief DMA data transfer direction
+ * @{
+ */
+#define DMA_PERIPH_TO_MEMORY ((uint32_t)0x00000000) /*!< Peripheral to memory direction */
+#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_SxCR_DIR_0) /*!< Memory to peripheral direction */
+#define DMA_MEMORY_TO_MEMORY ((uint32_t)DMA_SxCR_DIR_1) /*!< Memory to memory direction */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode
+ * @brief DMA peripheral incremented mode
+ * @{
+ */
+#define DMA_PINC_ENABLE ((uint32_t)DMA_SxCR_PINC) /*!< Peripheral increment mode enable */
+#define DMA_PINC_DISABLE ((uint32_t)0x00000000) /*!< Peripheral increment mode disable */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode
+ * @brief DMA memory incremented mode
+ * @{
+ */
+#define DMA_MINC_ENABLE ((uint32_t)DMA_SxCR_MINC) /*!< Memory increment mode enable */
+#define DMA_MINC_DISABLE ((uint32_t)0x00000000) /*!< Memory increment mode disable */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size
+ * @brief DMA peripheral data size
+ * @{
+ */
+#define DMA_PDATAALIGN_BYTE ((uint32_t)0x00000000) /*!< Peripheral data alignment: Byte */
+#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_PSIZE_0) /*!< Peripheral data alignment: HalfWord */
+#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_SxCR_PSIZE_1) /*!< Peripheral data alignment: Word */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Memory_data_size DMA Memory data size
+ * @brief DMA memory data size
+ * @{
+ */
+#define DMA_MDATAALIGN_BYTE ((uint32_t)0x00000000) /*!< Memory data alignment: Byte */
+#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_MSIZE_0) /*!< Memory data alignment: HalfWord */
+#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_SxCR_MSIZE_1) /*!< Memory data alignment: Word */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_mode DMA mode
+ * @brief DMA mode
+ * @{
+ */
+#define DMA_NORMAL ((uint32_t)0x00000000) /*!< Normal mode */
+#define DMA_CIRCULAR ((uint32_t)DMA_SxCR_CIRC) /*!< Circular mode */
+#define DMA_PFCTRL ((uint32_t)DMA_SxCR_PFCTRL) /*!< Peripheral flow control mode */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Priority_level DMA Priority level
+ * @brief DMA priority levels
+ * @{
+ */
+#define DMA_PRIORITY_LOW ((uint32_t)0x00000000) /*!< Priority level: Low */
+#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_SxCR_PL_0) /*!< Priority level: Medium */
+#define DMA_PRIORITY_HIGH ((uint32_t)DMA_SxCR_PL_1) /*!< Priority level: High */
+#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_SxCR_PL) /*!< Priority level: Very High */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_FIFO_direct_mode DMA FIFO direct mode
+ * @brief DMA FIFO direct mode
+ * @{
+ */
+#define DMA_FIFOMODE_DISABLE ((uint32_t)0x00000000) /*!< FIFO mode disable */
+#define DMA_FIFOMODE_ENABLE ((uint32_t)DMA_SxFCR_DMDIS) /*!< FIFO mode enable */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_FIFO_threshold_level DMA FIFO threshold level
+ * @brief DMA FIFO level
+ * @{
+ */
+#define DMA_FIFO_THRESHOLD_1QUARTERFULL ((uint32_t)0x00000000) /*!< FIFO threshold 1 quart full configuration */
+#define DMA_FIFO_THRESHOLD_HALFFULL ((uint32_t)DMA_SxFCR_FTH_0) /*!< FIFO threshold half full configuration */
+#define DMA_FIFO_THRESHOLD_3QUARTERSFULL ((uint32_t)DMA_SxFCR_FTH_1) /*!< FIFO threshold 3 quarts full configuration */
+#define DMA_FIFO_THRESHOLD_FULL ((uint32_t)DMA_SxFCR_FTH) /*!< FIFO threshold full configuration */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Memory_burst DMA Memory burst
+ * @brief DMA memory burst
+ * @{
+ */
+#define DMA_MBURST_SINGLE ((uint32_t)0x00000000)
+#define DMA_MBURST_INC4 ((uint32_t)DMA_SxCR_MBURST_0)
+#define DMA_MBURST_INC8 ((uint32_t)DMA_SxCR_MBURST_1)
+#define DMA_MBURST_INC16 ((uint32_t)DMA_SxCR_MBURST)
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_burst DMA Peripheral burst
+ * @brief DMA peripheral burst
+ * @{
+ */
+#define DMA_PBURST_SINGLE ((uint32_t)0x00000000)
+#define DMA_PBURST_INC4 ((uint32_t)DMA_SxCR_PBURST_0)
+#define DMA_PBURST_INC8 ((uint32_t)DMA_SxCR_PBURST_1)
+#define DMA_PBURST_INC16 ((uint32_t)DMA_SxCR_PBURST)
+/**
+ * @}
+ */
+
+/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions
+ * @brief DMA interrupts definition
+ * @{
+ */
+#define DMA_IT_TC ((uint32_t)DMA_SxCR_TCIE)
+#define DMA_IT_HT ((uint32_t)DMA_SxCR_HTIE)
+#define DMA_IT_TE ((uint32_t)DMA_SxCR_TEIE)
+#define DMA_IT_DME ((uint32_t)DMA_SxCR_DMEIE)
+#define DMA_IT_FE ((uint32_t)0x00000080)
+/**
+ * @}
+ */
+
+/** @defgroup DMA_flag_definitions DMA flag definitions
+ * @brief DMA flag definitions
+ * @{
+ */
+#define DMA_FLAG_FEIF0_4 ((uint32_t)0x00800001)
+#define DMA_FLAG_DMEIF0_4 ((uint32_t)0x00800004)
+#define DMA_FLAG_TEIF0_4 ((uint32_t)0x00000008)
+#define DMA_FLAG_HTIF0_4 ((uint32_t)0x00000010)
+#define DMA_FLAG_TCIF0_4 ((uint32_t)0x00000020)
+#define DMA_FLAG_FEIF1_5 ((uint32_t)0x00000040)
+#define DMA_FLAG_DMEIF1_5 ((uint32_t)0x00000100)
+#define DMA_FLAG_TEIF1_5 ((uint32_t)0x00000200)
+#define DMA_FLAG_HTIF1_5 ((uint32_t)0x00000400)
+#define DMA_FLAG_TCIF1_5 ((uint32_t)0x00000800)
+#define DMA_FLAG_FEIF2_6 ((uint32_t)0x00010000)
+#define DMA_FLAG_DMEIF2_6 ((uint32_t)0x00040000)
+#define DMA_FLAG_TEIF2_6 ((uint32_t)0x00080000)
+#define DMA_FLAG_HTIF2_6 ((uint32_t)0x00100000)
+#define DMA_FLAG_TCIF2_6 ((uint32_t)0x00200000)
+#define DMA_FLAG_FEIF3_7 ((uint32_t)0x00400000)
+#define DMA_FLAG_DMEIF3_7 ((uint32_t)0x01000000)
+#define DMA_FLAG_TEIF3_7 ((uint32_t)0x02000000)
+#define DMA_FLAG_HTIF3_7 ((uint32_t)0x04000000)
+#define DMA_FLAG_TCIF3_7 ((uint32_t)0x08000000)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset DMA handle state
+ * @param __HANDLE__: specifies the DMA handle.
+ * @retval None
+ */
+#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
+
+/**
+ * @brief Return the current DMA Stream FIFO filled level.
+ * @param __HANDLE__: DMA handle
+ * @retval The FIFO filling state.
+ * - DMA_FIFOStatus_Less1QuarterFull: when FIFO is less than 1 quarter-full
+ * and not empty.
+ * - DMA_FIFOStatus_1QuarterFull: if more than 1 quarter-full.
+ * - DMA_FIFOStatus_HalfFull: if more than 1 half-full.
+ * - DMA_FIFOStatus_3QuartersFull: if more than 3 quarters-full.
+ * - DMA_FIFOStatus_Empty: when FIFO is empty
+ * - DMA_FIFOStatus_Full: when FIFO is full
+ */
+#define __HAL_DMA_GET_FS(__HANDLE__) (((__HANDLE__)->Instance->FCR & (DMA_SxFCR_FS)))
+
+/**
+ * @brief Enable the specified DMA Stream.
+ * @param __HANDLE__: DMA handle
+ * @retval None
+ */
+#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA_SxCR_EN)
+
+/**
+ * @brief Disable the specified DMA Stream.
+ * @param __HANDLE__: DMA handle
+ * @retval None
+ */
+#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~DMA_SxCR_EN)
+
+/* Interrupt & Flag management */
+
+/**
+ * @brief Return the current DMA Stream transfer complete flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified transfer complete flag index.
+ */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TCIF2_6 :\
+ DMA_FLAG_TCIF3_7)
+
+/**
+ * @brief Return the current DMA Stream half transfer complete flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified half transfer complete flag index.
+ */
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_HTIF2_6 :\
+ DMA_FLAG_HTIF3_7)
+
+/**
+ * @brief Return the current DMA Stream transfer error flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TEIF2_6 :\
+ DMA_FLAG_TEIF3_7)
+
+/**
+ * @brief Return the current DMA Stream FIFO error flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified FIFO error flag index.
+ */
+#define __HAL_DMA_GET_FE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_FEIF2_6 :\
+ DMA_FLAG_FEIF3_7)
+
+/**
+ * @brief Return the current DMA Stream direct mode error flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified direct mode error flag index.
+ */
+#define __HAL_DMA_GET_DME_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_DMEIF2_6 :\
+ DMA_FLAG_DMEIF3_7)
+
+/**
+ * @brief Get the DMA Stream pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCIFx: Transfer complete flag.
+ * @arg DMA_FLAG_HTIFx: Half transfer complete flag.
+ * @arg DMA_FLAG_TEIFx: Transfer error flag.
+ * @arg DMA_FLAG_DMEIFx: Direct mode error flag.
+ * @arg DMA_FLAG_FEIFx: FIFO error flag.
+ * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HISR & (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LISR & (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HISR & (__FLAG__)) : (DMA1->LISR & (__FLAG__)))
+
+/**
+ * @brief Clear the DMA Stream pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCIFx: Transfer complete flag.
+ * @arg DMA_FLAG_HTIFx: Half transfer complete flag.
+ * @arg DMA_FLAG_TEIFx: Transfer error flag.
+ * @arg DMA_FLAG_DMEIFx: Direct mode error flag.
+ * @arg DMA_FLAG_FEIFx: FIFO error flag.
+ * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.
+ * @retval None
+ */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HIFCR = (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LIFCR = (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HIFCR = (__FLAG__)) : (DMA1->LIFCR = (__FLAG__)))
+
+/**
+ * @brief Enable the specified DMA Stream interrupts.
+ * @param __HANDLE__: DMA handle
+ * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask.
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask.
+ * @arg DMA_IT_TE: Transfer error interrupt mask.
+ * @arg DMA_IT_FE: FIFO error interrupt mask.
+ * @arg DMA_IT_DME: Direct mode error interrupt.
+ * @retval None
+ */
+#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
+((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR |= (__INTERRUPT__)))
+
+/**
+ * @brief Disable the specified DMA Stream interrupts.
+ * @param __HANDLE__: DMA handle
+ * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask.
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask.
+ * @arg DMA_IT_TE: Transfer error interrupt mask.
+ * @arg DMA_IT_FE: FIFO error interrupt mask.
+ * @arg DMA_IT_DME: Direct mode error interrupt.
+ * @retval None
+ */
+#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
+((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR &= ~(__INTERRUPT__)))
+
+/**
+ * @brief Check whether the specified DMA Stream interrupt has occurred or not.
+ * @param __HANDLE__: DMA handle
+ * @param __INTERRUPT__: specifies the DMA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask.
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask.
+ * @arg DMA_IT_TE: Transfer error interrupt mask.
+ * @arg DMA_IT_FE: FIFO error interrupt mask.
+ * @arg DMA_IT_DME: Direct mode error interrupt.
+ * @retval The state of DMA_IT.
+ */
+#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
+ ((__HANDLE__)->Instance->CR & (__INTERRUPT__)) : \
+ ((__HANDLE__)->Instance->FCR & (__INTERRUPT__)))
+
+/**
+ * @brief Writes the number of data units to be transferred on the DMA Stream.
+ * @param __HANDLE__: DMA handle
+ * @param __COUNTER__: Number of data units to be transferred (from 0 to 65535)
+ * Number of data items depends only on the Peripheral data format.
+ *
+ * @note If Peripheral data format is Bytes: number of data units is equal
+ * to total number of bytes to be transferred.
+ *
+ * @note If Peripheral data format is Half-Word: number of data units is
+ * equal to total number of bytes to be transferred / 2.
+ *
+ * @note If Peripheral data format is Word: number of data units is equal
+ * to total number of bytes to be transferred / 4.
+ *
+ * @retval The number of remaining data units in the current DMAy Streamx transfer.
+ */
+#define __HAL_DMA_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->NDTR = (uint16_t)(__COUNTER__))
+
+/**
+ * @brief Returns the number of remaining data units in the current DMAy Streamx transfer.
+ * @param __HANDLE__: DMA handle
+ *
+ * @retval The number of remaining data units in the current DMA Stream transfer.
+ */
+#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->NDTR)
+
+
+/* Include DMA HAL Extension module */
+#include "stm32f4xx_hal_dma_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Functions DMA Exported Functions
+ * @brief DMA Exported functions
+ * @{
+ */
+
+/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Exported_Functions_Group2 I/O operation functions
+ * @brief I/O operation functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout);
+void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions
+ * @brief Peripheral State functions
+ * @{
+ */
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
+uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+/* Private Constants -------------------------------------------------------------*/
+/** @defgroup DMA_Private_Constants DMA Private Constants
+ * @brief DMA private defines and constants
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DMA_Private_Macros DMA Private Macros
+ * @brief DMA private macros
+ * @{
+ */
+#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \
+ ((CHANNEL) == DMA_CHANNEL_1) || \
+ ((CHANNEL) == DMA_CHANNEL_2) || \
+ ((CHANNEL) == DMA_CHANNEL_3) || \
+ ((CHANNEL) == DMA_CHANNEL_4) || \
+ ((CHANNEL) == DMA_CHANNEL_5) || \
+ ((CHANNEL) == DMA_CHANNEL_6) || \
+ ((CHANNEL) == DMA_CHANNEL_7))
+
+#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
+ ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \
+ ((DIRECTION) == DMA_MEMORY_TO_MEMORY))
+
+#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000))
+
+#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
+ ((STATE) == DMA_PINC_DISABLE))
+
+#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \
+ ((STATE) == DMA_MINC_DISABLE))
+
+#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_PDATAALIGN_WORD))
+
+#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_MDATAALIGN_WORD ))
+
+#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \
+ ((MODE) == DMA_CIRCULAR) || \
+ ((MODE) == DMA_PFCTRL))
+
+#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \
+ ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
+ ((PRIORITY) == DMA_PRIORITY_HIGH) || \
+ ((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
+
+#define IS_DMA_FIFO_MODE_STATE(STATE) (((STATE) == DMA_FIFOMODE_DISABLE ) || \
+ ((STATE) == DMA_FIFOMODE_ENABLE))
+
+#define IS_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == DMA_FIFO_THRESHOLD_1QUARTERFULL ) || \
+ ((THRESHOLD) == DMA_FIFO_THRESHOLD_HALFFULL) || \
+ ((THRESHOLD) == DMA_FIFO_THRESHOLD_3QUARTERSFULL) || \
+ ((THRESHOLD) == DMA_FIFO_THRESHOLD_FULL))
+
+#define IS_DMA_MEMORY_BURST(BURST) (((BURST) == DMA_MBURST_SINGLE) || \
+ ((BURST) == DMA_MBURST_INC4) || \
+ ((BURST) == DMA_MBURST_INC8) || \
+ ((BURST) == DMA_MBURST_INC16))
+
+#define IS_DMA_PERIPHERAL_BURST(BURST) (((BURST) == DMA_PBURST_SINGLE) || \
+ ((BURST) == DMA_PBURST_INC4) || \
+ ((BURST) == DMA_PBURST_INC8) || \
+ ((BURST) == DMA_PBURST_INC16))
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DMA_Private_Functions DMA Private Functions
+ * @brief DMA private functions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_dma2d.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,554 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dma2d.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of DMA2D HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DMA2D_H
+#define __STM32F4xx_HAL_DMA2D_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup DMA2D DMA2D
+ * @brief DMA2D HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DMA2D_Exported_Types DMA2D Exported Types
+ * @{
+ */
+#define MAX_DMA2D_LAYER 2
+
+/**
+ * @brief DMA2D color Structure definition
+ */
+typedef struct
+{
+ uint32_t Blue; /*!< Configures the blue value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint32_t Green; /*!< Configures the green value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint32_t Red; /*!< Configures the red value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+} DMA2D_ColorTypeDef;
+
+/**
+ * @brief DMA2D CLUT Structure definition
+ */
+typedef struct
+{
+ uint32_t *pCLUT; /*!< Configures the DMA2D CLUT memory address.*/
+
+ uint32_t CLUTColorMode; /*!< configures the DMA2D CLUT color mode.
+ This parameter can be one value of @ref DMA2D_CLUT_CM */
+
+ uint32_t Size; /*!< configures the DMA2D CLUT size.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.*/
+} DMA2D_CLUTCfgTypeDef;
+
+/**
+ * @brief DMA2D Init structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< configures the DMA2D transfer mode.
+ This parameter can be one value of @ref DMA2D_Mode */
+
+ uint32_t ColorMode; /*!< configures the color format of the output image.
+ This parameter can be one value of @ref DMA2D_Color_Mode */
+
+ uint32_t OutputOffset; /*!< Specifies the Offset value.
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */
+} DMA2D_InitTypeDef;
+
+/**
+ * @brief DMA2D Layer structure definition
+ */
+typedef struct
+{
+ uint32_t InputOffset; /*!< configures the DMA2D foreground offset.
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */
+
+ uint32_t InputColorMode; /*!< configures the DMA2D foreground color mode .
+ This parameter can be one value of @ref DMA2D_Input_Color_Mode */
+
+ uint32_t AlphaMode; /*!< configures the DMA2D foreground alpha mode.
+ This parameter can be one value of @ref DMA2D_ALPHA_MODE */
+
+ uint32_t InputAlpha; /*!< Specifies the DMA2D foreground alpha value and color value in case of A8 or A4 color mode.
+ This parameter must be a number between Min_Data = 0x00000000 and Max_Data = 0xFFFFFFFF
+ in case of A8 or A4 color mode (ARGB).
+ Otherwise, This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.*/
+
+} DMA2D_LayerCfgTypeDef;
+
+/**
+ * @brief HAL DMA2D State structures definition
+ */
+typedef enum
+{
+ HAL_DMA2D_STATE_RESET = 0x00, /*!< DMA2D not yet initialized or disabled */
+ HAL_DMA2D_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_DMA2D_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_DMA2D_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_DMA2D_STATE_ERROR = 0x04, /*!< DMA2D state error */
+ HAL_DMA2D_STATE_SUSPEND = 0x05 /*!< DMA2D process is suspended */
+}HAL_DMA2D_StateTypeDef;
+
+/**
+ * @brief DMA2D handle Structure definition
+ */
+typedef struct __DMA2D_HandleTypeDef
+{
+ DMA2D_TypeDef *Instance; /*!< DMA2D Register base address */
+
+ DMA2D_InitTypeDef Init; /*!< DMA2D communication parameters */
+
+ void (* XferCpltCallback)(struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D transfer complete callback */
+
+ void (* XferErrorCallback)(struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D transfer error callback */
+
+ DMA2D_LayerCfgTypeDef LayerCfg[MAX_DMA2D_LAYER]; /*!< DMA2D Layers parameters */
+
+ HAL_LockTypeDef Lock; /*!< DMA2D Lock */
+
+ __IO HAL_DMA2D_StateTypeDef State; /*!< DMA2D transfer state */
+
+ __IO uint32_t ErrorCode; /*!< DMA2D Error code */
+} DMA2D_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DMA2D_Exported_Constants DMA2D Exported Constants
+ * @{
+ */
+
+/** @defgroup DMA2D_Error_Code DMA2D Error Code
+ * @{
+ */
+#define HAL_DMA2D_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_DMA2D_ERROR_TE ((uint32_t)0x00000001) /*!< Transfer error */
+#define HAL_DMA2D_ERROR_CE ((uint32_t)0x00000002) /*!< Configuration error */
+#define HAL_DMA2D_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Mode DMA2D Mode
+ * @{
+ */
+#define DMA2D_M2M ((uint32_t)0x00000000) /*!< DMA2D memory to memory transfer mode */
+#define DMA2D_M2M_PFC ((uint32_t)0x00010000) /*!< DMA2D memory to memory with pixel format conversion transfer mode */
+#define DMA2D_M2M_BLEND ((uint32_t)0x00020000) /*!< DMA2D memory to memory with blending transfer mode */
+#define DMA2D_R2M ((uint32_t)0x00030000) /*!< DMA2D register to memory transfer mode */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Color_Mode DMA2D Color Mode
+ * @{
+ */
+#define DMA2D_ARGB8888 ((uint32_t)0x00000000) /*!< ARGB8888 DMA2D color mode */
+#define DMA2D_RGB888 ((uint32_t)0x00000001) /*!< RGB888 DMA2D color mode */
+#define DMA2D_RGB565 ((uint32_t)0x00000002) /*!< RGB565 DMA2D color mode */
+#define DMA2D_ARGB1555 ((uint32_t)0x00000003) /*!< ARGB1555 DMA2D color mode */
+#define DMA2D_ARGB4444 ((uint32_t)0x00000004) /*!< ARGB4444 DMA2D color mode */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_COLOR_VALUE DMA2D COLOR VALUE
+ * @{
+ */
+#define COLOR_VALUE ((uint32_t)0x000000FF) /*!< color value mask */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_SIZE DMA2D SIZE
+ * @{
+ */
+#define DMA2D_PIXEL (DMA2D_NLR_PL >> 16) /*!< DMA2D pixel per line */
+#define DMA2D_LINE DMA2D_NLR_NL /*!< DMA2D number of line */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Offset DMA2D Offset
+ * @{
+ */
+#define DMA2D_OFFSET DMA2D_FGOR_LO /*!< Line Offset */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Input_Color_Mode DMA2D Input Color Mode
+ * @{
+ */
+#define CM_ARGB8888 ((uint32_t)0x00000000) /*!< ARGB8888 color mode */
+#define CM_RGB888 ((uint32_t)0x00000001) /*!< RGB888 color mode */
+#define CM_RGB565 ((uint32_t)0x00000002) /*!< RGB565 color mode */
+#define CM_ARGB1555 ((uint32_t)0x00000003) /*!< ARGB1555 color mode */
+#define CM_ARGB4444 ((uint32_t)0x00000004) /*!< ARGB4444 color mode */
+#define CM_L8 ((uint32_t)0x00000005) /*!< L8 color mode */
+#define CM_AL44 ((uint32_t)0x00000006) /*!< AL44 color mode */
+#define CM_AL88 ((uint32_t)0x00000007) /*!< AL88 color mode */
+#define CM_L4 ((uint32_t)0x00000008) /*!< L4 color mode */
+#define CM_A8 ((uint32_t)0x00000009) /*!< A8 color mode */
+#define CM_A4 ((uint32_t)0x0000000A) /*!< A4 color mode */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_ALPHA_MODE DMA2D ALPHA MODE
+ * @{
+ */
+#define DMA2D_NO_MODIF_ALPHA ((uint32_t)0x00000000) /*!< No modification of the alpha channel value */
+#define DMA2D_REPLACE_ALPHA ((uint32_t)0x00000001) /*!< Replace original alpha channel value by programmed alpha value */
+#define DMA2D_COMBINE_ALPHA ((uint32_t)0x00000002) /*!< Replace original alpha channel value by programmed alpha value
+ with original alpha channel value */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_CLUT_CM DMA2D CLUT CM
+ * @{
+ */
+#define DMA2D_CCM_ARGB8888 ((uint32_t)0x00000000) /*!< ARGB8888 DMA2D C-LUT color mode */
+#define DMA2D_CCM_RGB888 ((uint32_t)0x00000001) /*!< RGB888 DMA2D C-LUT color mode */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Size_Clut DMA2D Size Clut
+ * @{
+ */
+#define DMA2D_CLUT_SIZE (DMA2D_FGPFCCR_CS >> 8) /*!< DMA2D C-LUT size */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_DeadTime DMA2D DeadTime
+ * @{
+ */
+#define LINE_WATERMARK DMA2D_LWR_LW
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Interrupts DMA2D Interrupts
+ * @{
+ */
+#define DMA2D_IT_CE DMA2D_CR_CEIE /*!< Configuration Error Interrupt */
+#define DMA2D_IT_CTC DMA2D_CR_CTCIE /*!< C-LUT Transfer Complete Interrupt */
+#define DMA2D_IT_CAE DMA2D_CR_CAEIE /*!< C-LUT Access Error Interrupt */
+#define DMA2D_IT_TW DMA2D_CR_TWIE /*!< Transfer Watermark Interrupt */
+#define DMA2D_IT_TC DMA2D_CR_TCIE /*!< Transfer Complete Interrupt */
+#define DMA2D_IT_TE DMA2D_CR_TEIE /*!< Transfer Error Interrupt */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Flag DMA2D Flag
+ * @{
+ */
+#define DMA2D_FLAG_CE DMA2D_ISR_CEIF /*!< Configuration Error Interrupt Flag */
+#define DMA2D_FLAG_CTC DMA2D_ISR_CTCIF /*!< C-LUT Transfer Complete Interrupt Flag */
+#define DMA2D_FLAG_CAE DMA2D_ISR_CAEIF /*!< C-LUT Access Error Interrupt Flag */
+#define DMA2D_FLAG_TW DMA2D_ISR_TWIF /*!< Transfer Watermark Interrupt Flag */
+#define DMA2D_FLAG_TC DMA2D_ISR_TCIF /*!< Transfer Complete Interrupt Flag */
+#define DMA2D_FLAG_TE DMA2D_ISR_TEIF /*!< Transfer Error Interrupt Flag */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup DMA2D_Exported_Macros DMA2D Exported Macros
+ * @{
+ */
+
+/** @brief Reset DMA2D handle state
+ * @param __HANDLE__: specifies the DMA2D handle.
+ * @retval None
+ */
+#define __HAL_DMA2D_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA2D_STATE_RESET)
+
+/**
+ * @brief Enable the DMA2D.
+ * @param __HANDLE__: DMA2D handle
+ * @retval None.
+ */
+#define __HAL_DMA2D_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA2D_CR_START)
+
+/**
+ * @brief Disable the DMA2D.
+ * @param __HANDLE__: DMA2D handle
+ * @retval None.
+ */
+#define __HAL_DMA2D_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~DMA2D_CR_START)
+
+/* Interrupt & Flag management */
+/**
+ * @brief Get the DMA2D pending flags.
+ * @param __HANDLE__: DMA2D handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DMA2D_FLAG_CE: Configuration error flag
+ * @arg DMA2D_FLAG_CTC: C-LUT transfer complete flag
+ * @arg DMA2D_FLAG_CAE: C-LUT access error flag
+ * @arg DMA2D_FLAG_TW: Transfer Watermark flag
+ * @arg DMA2D_FLAG_TC: Transfer complete flag
+ * @arg DMA2D_FLAG_TE: Transfer error flag
+ * @retval The state of FLAG.
+ */
+#define __HAL_DMA2D_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
+
+/**
+ * @brief Clears the DMA2D pending flags.
+ * @param __HANDLE__: DMA2D handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA2D_FLAG_CE: Configuration error flag
+ * @arg DMA2D_FLAG_CTC: C-LUT transfer complete flag
+ * @arg DMA2D_FLAG_CAE: C-LUT access error flag
+ * @arg DMA2D_FLAG_TW: Transfer Watermark flag
+ * @arg DMA2D_FLAG_TC: Transfer complete flag
+ * @arg DMA2D_FLAG_TE: Transfer error flag
+ * @retval None
+ */
+#define __HAL_DMA2D_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->IFCR = (__FLAG__))
+
+/**
+ * @brief Enables the specified DMA2D interrupts.
+ * @param __HANDLE__: DMA2D handle
+ * @param __INTERRUPT__: specifies the DMA2D interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA2D_IT_CE: Configuration error interrupt mask
+ * @arg DMA2D_IT_CTC: C-LUT transfer complete interrupt mask
+ * @arg DMA2D_IT_CAE: C-LUT access error interrupt mask
+ * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask
+ * @arg DMA2D_IT_TC: Transfer complete interrupt mask
+ * @arg DMA2D_IT_TE: Transfer error interrupt mask
+ * @retval None
+ */
+#define __HAL_DMA2D_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified DMA2D interrupts.
+ * @param __HANDLE__: DMA2D handle
+ * @param __INTERRUPT__: specifies the DMA2D interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA2D_IT_CE: Configuration error interrupt mask
+ * @arg DMA2D_IT_CTC: C-LUT transfer complete interrupt mask
+ * @arg DMA2D_IT_CAE: C-LUT access error interrupt mask
+ * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask
+ * @arg DMA2D_IT_TC: Transfer complete interrupt mask
+ * @arg DMA2D_IT_TE: Transfer error interrupt mask
+ * @retval None
+ */
+#define __HAL_DMA2D_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Checks whether the specified DMA2D interrupt has occurred or not.
+ * @param __HANDLE__: DMA2D handle
+ * @param __INTERRUPT__: specifies the DMA2D interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DMA2D_IT_CE: Configuration error interrupt mask
+ * @arg DMA2D_IT_CTC: C-LUT transfer complete interrupt mask
+ * @arg DMA2D_IT_CAE: C-LUT access error interrupt mask
+ * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask
+ * @arg DMA2D_IT_TC: Transfer complete interrupt mask
+ * @arg DMA2D_IT_TE: Transfer error interrupt mask
+ * @retval The state of INTERRUPT.
+ */
+#define __HAL_DMA2D_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR & (__INTERRUPT__))
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup DMA2D_Exported_Functions DMA2D Exported Functions
+ * @{
+ */
+/* Initialization and de-initialization functions *******************************/
+HAL_StatusTypeDef HAL_DMA2D_Init(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_DeInit (DMA2D_HandleTypeDef *hdma2d);
+void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef* hdma2d);
+void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef* hdma2d);
+
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_DMA2D_Start(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height);
+HAL_StatusTypeDef HAL_DMA2D_BlendingStart(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Height);
+HAL_StatusTypeDef HAL_DMA2D_Start_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height);
+HAL_StatusTypeDef HAL_DMA2D_BlendingStart_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Height);
+HAL_StatusTypeDef HAL_DMA2D_Suspend(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_Resume(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_Abort(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_PollForTransfer(DMA2D_HandleTypeDef *hdma2d, uint32_t Timeout);
+void HAL_DMA2D_IRQHandler(DMA2D_HandleTypeDef *hdma2d);
+
+/* Peripheral Control functions *************************************************/
+HAL_StatusTypeDef HAL_DMA2D_ConfigLayer(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_ConfigCLUT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_EnableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_DisableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_ProgramLineEvent(DMA2D_HandleTypeDef *hdma2d, uint32_t Line);
+
+/* Peripheral State functions ***************************************************/
+HAL_DMA2D_StateTypeDef HAL_DMA2D_GetState(DMA2D_HandleTypeDef *hdma2d);
+uint32_t HAL_DMA2D_GetError(DMA2D_HandleTypeDef *hdma2d);
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup DMA2D_Private_Types DMA2D Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private defines -------------------------------------------------------------*/
+/** @defgroup DMA2D_Private_Defines DMA2D Private Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup DMA2D_Private_Variables DMA2D Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup DMA2D_Private_Constants DMA2D Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DMA2D_Private_Macros DMA2D Private Macros
+ * @{
+ */
+#define IS_DMA2D_LAYER(LAYER) ((LAYER) <= MAX_DMA2D_LAYER)
+#define IS_DMA2D_MODE(MODE) (((MODE) == DMA2D_M2M) || ((MODE) == DMA2D_M2M_PFC) || \
+ ((MODE) == DMA2D_M2M_BLEND) || ((MODE) == DMA2D_R2M))
+#define IS_DMA2D_CMODE(MODE_ARGB) (((MODE_ARGB) == DMA2D_ARGB8888) || ((MODE_ARGB) == DMA2D_RGB888) || \
+ ((MODE_ARGB) == DMA2D_RGB565) || ((MODE_ARGB) == DMA2D_ARGB1555) || \
+ ((MODE_ARGB) == DMA2D_ARGB4444))
+#define IS_DMA2D_COLOR(COLOR) ((COLOR) <= COLOR_VALUE)
+#define IS_DMA2D_LINE(LINE) ((LINE) <= DMA2D_LINE)
+#define IS_DMA2D_PIXEL(PIXEL) ((PIXEL) <= DMA2D_PIXEL)
+#define IS_DMA2D_OFFSET(OOFFSET) ((OOFFSET) <= DMA2D_OFFSET)
+#define IS_DMA2D_INPUT_COLOR_MODE(INPUT_CM) (((INPUT_CM) == CM_ARGB8888) || ((INPUT_CM) == CM_RGB888) || \
+ ((INPUT_CM) == CM_RGB565) || ((INPUT_CM) == CM_ARGB1555) || \
+ ((INPUT_CM) == CM_ARGB4444) || ((INPUT_CM) == CM_L8) || \
+ ((INPUT_CM) == CM_AL44) || ((INPUT_CM) == CM_AL88) || \
+ ((INPUT_CM) == CM_L4) || ((INPUT_CM) == CM_A8) || \
+ ((INPUT_CM) == CM_A4))
+#define IS_DMA2D_ALPHA_MODE(AlphaMode) (((AlphaMode) == DMA2D_NO_MODIF_ALPHA) || \
+ ((AlphaMode) == DMA2D_REPLACE_ALPHA) || \
+ ((AlphaMode) == DMA2D_COMBINE_ALPHA))
+#define IS_DMA2D_CLUT_CM(CLUT_CM) (((CLUT_CM) == DMA2D_CCM_ARGB8888) || ((CLUT_CM) == DMA2D_CCM_RGB888))
+#define IS_DMA2D_CLUT_SIZE(CLUT_SIZE) ((CLUT_SIZE) <= DMA2D_CLUT_SIZE)
+#define IS_DMA2D_LineWatermark(LineWatermark) ((LineWatermark) <= LINE_WATERMARK)
+/**
+ * @}
+ */
+
+/* Private functions prototypes ---------------------------------------------------------*/
+/** @defgroup DMA2D_Private_Functions_Prototypes DMA2D Private Functions Prototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DMA2D_Private_Functions DMA2D Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_DMA2D_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_dma_ex.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,123 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dma_ex.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of DMA HAL extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DMA_EX_H
+#define __STM32F4xx_HAL_DMA_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMAEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DMAEx_Exported_Types DMAEx Exported Types
+ * @brief DMAEx Exported types
+ * @{
+ */
+
+/**
+ * @brief HAL DMA Memory definition
+ */
+typedef enum
+{
+ MEMORY0 = 0x00, /*!< Memory 0 */
+ MEMORY1 = 0x01, /*!< Memory 1 */
+
+}HAL_DMA_MemoryTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions
+ * @brief DMAEx Exported functions
+ * @{
+ */
+
+/** @defgroup DMAEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ * @{
+ */
+
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory);
+
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup DMAEx_Private_Functions DMAEx Private Functions
+ * @brief DMAEx Private functions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_HAL_DMA_EX_H*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_eth.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,2223 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_eth.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of ETH HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_ETH_H
+#define __STM32F4xx_HAL_ETH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup ETH
+ * @{
+ */
+
+/** @addtogroup ETH_Private_Macros
+ * @{
+ */
+#define IS_ETH_PHY_ADDRESS(ADDRESS) ((ADDRESS) <= 0x20)
+#define IS_ETH_AUTONEGOTIATION(CMD) (((CMD) == ETH_AUTONEGOTIATION_ENABLE) || \
+ ((CMD) == ETH_AUTONEGOTIATION_DISABLE))
+#define IS_ETH_SPEED(SPEED) (((SPEED) == ETH_SPEED_10M) || \
+ ((SPEED) == ETH_SPEED_100M))
+#define IS_ETH_DUPLEX_MODE(MODE) (((MODE) == ETH_MODE_FULLDUPLEX) || \
+ ((MODE) == ETH_MODE_HALFDUPLEX))
+#define IS_ETH_DUPLEX_MODE(MODE) (((MODE) == ETH_MODE_FULLDUPLEX) || \
+ ((MODE) == ETH_MODE_HALFDUPLEX))
+#define IS_ETH_RX_MODE(MODE) (((MODE) == ETH_RXPOLLING_MODE) || \
+ ((MODE) == ETH_RXINTERRUPT_MODE))
+#define IS_ETH_RX_MODE(MODE) (((MODE) == ETH_RXPOLLING_MODE) || \
+ ((MODE) == ETH_RXINTERRUPT_MODE))
+#define IS_ETH_RX_MODE(MODE) (((MODE) == ETH_RXPOLLING_MODE) || \
+ ((MODE) == ETH_RXINTERRUPT_MODE))
+#define IS_ETH_CHECKSUM_MODE(MODE) (((MODE) == ETH_CHECKSUM_BY_HARDWARE) || \
+ ((MODE) == ETH_CHECKSUM_BY_SOFTWARE))
+#define IS_ETH_MEDIA_INTERFACE(MODE) (((MODE) == ETH_MEDIA_INTERFACE_MII) || \
+ ((MODE) == ETH_MEDIA_INTERFACE_RMII))
+#define IS_ETH_WATCHDOG(CMD) (((CMD) == ETH_WATCHDOG_ENABLE) || \
+ ((CMD) == ETH_WATCHDOG_DISABLE))
+#define IS_ETH_JABBER(CMD) (((CMD) == ETH_JABBER_ENABLE) || \
+ ((CMD) == ETH_JABBER_DISABLE))
+#define IS_ETH_INTER_FRAME_GAP(GAP) (((GAP) == ETH_INTERFRAMEGAP_96BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_88BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_80BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_72BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_64BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_56BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_48BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_40BIT))
+#define IS_ETH_CARRIER_SENSE(CMD) (((CMD) == ETH_CARRIERSENCE_ENABLE) || \
+ ((CMD) == ETH_CARRIERSENCE_DISABLE))
+#define IS_ETH_RECEIVE_OWN(CMD) (((CMD) == ETH_RECEIVEOWN_ENABLE) || \
+ ((CMD) == ETH_RECEIVEOWN_DISABLE))
+#define IS_ETH_LOOPBACK_MODE(CMD) (((CMD) == ETH_LOOPBACKMODE_ENABLE) || \
+ ((CMD) == ETH_LOOPBACKMODE_DISABLE))
+#define IS_ETH_CHECKSUM_OFFLOAD(CMD) (((CMD) == ETH_CHECKSUMOFFLAOD_ENABLE) || \
+ ((CMD) == ETH_CHECKSUMOFFLAOD_DISABLE))
+#define IS_ETH_RETRY_TRANSMISSION(CMD) (((CMD) == ETH_RETRYTRANSMISSION_ENABLE) || \
+ ((CMD) == ETH_RETRYTRANSMISSION_DISABLE))
+#define IS_ETH_AUTOMATIC_PADCRC_STRIP(CMD) (((CMD) == ETH_AUTOMATICPADCRCSTRIP_ENABLE) || \
+ ((CMD) == ETH_AUTOMATICPADCRCSTRIP_DISABLE))
+#define IS_ETH_BACKOFF_LIMIT(LIMIT) (((LIMIT) == ETH_BACKOFFLIMIT_10) || \
+ ((LIMIT) == ETH_BACKOFFLIMIT_8) || \
+ ((LIMIT) == ETH_BACKOFFLIMIT_4) || \
+ ((LIMIT) == ETH_BACKOFFLIMIT_1))
+#define IS_ETH_DEFERRAL_CHECK(CMD) (((CMD) == ETH_DEFFERRALCHECK_ENABLE) || \
+ ((CMD) == ETH_DEFFERRALCHECK_DISABLE))
+#define IS_ETH_RECEIVE_ALL(CMD) (((CMD) == ETH_RECEIVEALL_ENABLE) || \
+ ((CMD) == ETH_RECEIVEAll_DISABLE))
+#define IS_ETH_SOURCE_ADDR_FILTER(CMD) (((CMD) == ETH_SOURCEADDRFILTER_NORMAL_ENABLE) || \
+ ((CMD) == ETH_SOURCEADDRFILTER_INVERSE_ENABLE) || \
+ ((CMD) == ETH_SOURCEADDRFILTER_DISABLE))
+#define IS_ETH_CONTROL_FRAMES(PASS) (((PASS) == ETH_PASSCONTROLFRAMES_BLOCKALL) || \
+ ((PASS) == ETH_PASSCONTROLFRAMES_FORWARDALL) || \
+ ((PASS) == ETH_PASSCONTROLFRAMES_FORWARDPASSEDADDRFILTER))
+#define IS_ETH_BROADCAST_FRAMES_RECEPTION(CMD) (((CMD) == ETH_BROADCASTFRAMESRECEPTION_ENABLE) || \
+ ((CMD) == ETH_BROADCASTFRAMESRECEPTION_DISABLE))
+#define IS_ETH_DESTINATION_ADDR_FILTER(FILTER) (((FILTER) == ETH_DESTINATIONADDRFILTER_NORMAL) || \
+ ((FILTER) == ETH_DESTINATIONADDRFILTER_INVERSE))
+#define IS_ETH_PROMISCUOUS_MODE(CMD) (((CMD) == ETH_PROMISCUOUS_MODE_ENABLE) || \
+ ((CMD) == ETH_PROMISCUOUS_MODE_DISABLE))
+#define IS_ETH_MULTICAST_FRAMES_FILTER(FILTER) (((FILTER) == ETH_MULTICASTFRAMESFILTER_PERFECTHASHTABLE) || \
+ ((FILTER) == ETH_MULTICASTFRAMESFILTER_HASHTABLE) || \
+ ((FILTER) == ETH_MULTICASTFRAMESFILTER_PERFECT) || \
+ ((FILTER) == ETH_MULTICASTFRAMESFILTER_NONE))
+#define IS_ETH_UNICAST_FRAMES_FILTER(FILTER) (((FILTER) == ETH_UNICASTFRAMESFILTER_PERFECTHASHTABLE) || \
+ ((FILTER) == ETH_UNICASTFRAMESFILTER_HASHTABLE) || \
+ ((FILTER) == ETH_UNICASTFRAMESFILTER_PERFECT))
+#define IS_ETH_PAUSE_TIME(TIME) ((TIME) <= 0xFFFF)
+#define IS_ETH_ZEROQUANTA_PAUSE(CMD) (((CMD) == ETH_ZEROQUANTAPAUSE_ENABLE) || \
+ ((CMD) == ETH_ZEROQUANTAPAUSE_DISABLE))
+#define IS_ETH_PAUSE_LOW_THRESHOLD(THRESHOLD) (((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS4) || \
+ ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS28) || \
+ ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS144) || \
+ ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS256))
+#define IS_ETH_UNICAST_PAUSE_FRAME_DETECT(CMD) (((CMD) == ETH_UNICASTPAUSEFRAMEDETECT_ENABLE) || \
+ ((CMD) == ETH_UNICASTPAUSEFRAMEDETECT_DISABLE))
+#define IS_ETH_RECEIVE_FLOWCONTROL(CMD) (((CMD) == ETH_RECEIVEFLOWCONTROL_ENABLE) || \
+ ((CMD) == ETH_RECEIVEFLOWCONTROL_DISABLE))
+#define IS_ETH_TRANSMIT_FLOWCONTROL(CMD) (((CMD) == ETH_TRANSMITFLOWCONTROL_ENABLE) || \
+ ((CMD) == ETH_TRANSMITFLOWCONTROL_DISABLE))
+#define IS_ETH_VLAN_TAG_COMPARISON(COMPARISON) (((COMPARISON) == ETH_VLANTAGCOMPARISON_12BIT) || \
+ ((COMPARISON) == ETH_VLANTAGCOMPARISON_16BIT))
+#define IS_ETH_VLAN_TAG_IDENTIFIER(IDENTIFIER) ((IDENTIFIER) <= 0xFFFF)
+#define IS_ETH_MAC_ADDRESS0123(ADDRESS) (((ADDRESS) == ETH_MAC_ADDRESS0) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS1) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS2) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS3))
+#define IS_ETH_MAC_ADDRESS123(ADDRESS) (((ADDRESS) == ETH_MAC_ADDRESS1) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS2) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS3))
+#define IS_ETH_MAC_ADDRESS_FILTER(FILTER) (((FILTER) == ETH_MAC_ADDRESSFILTER_SA) || \
+ ((FILTER) == ETH_MAC_ADDRESSFILTER_DA))
+#define IS_ETH_MAC_ADDRESS_MASK(MASK) (((MASK) == ETH_MAC_ADDRESSMASK_BYTE6) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE5) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE4) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE3) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE2) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE1))
+#define IS_ETH_DROP_TCPIP_CHECKSUM_FRAME(CMD) (((CMD) == ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE) || \
+ ((CMD) == ETH_DROPTCPIPCHECKSUMERRORFRAME_DISABLE))
+#define IS_ETH_RECEIVE_STORE_FORWARD(CMD) (((CMD) == ETH_RECEIVESTOREFORWARD_ENABLE) || \
+ ((CMD) == ETH_RECEIVESTOREFORWARD_DISABLE))
+#define IS_ETH_FLUSH_RECEIVE_FRAME(CMD) (((CMD) == ETH_FLUSHRECEIVEDFRAME_ENABLE) || \
+ ((CMD) == ETH_FLUSHRECEIVEDFRAME_DISABLE))
+#define IS_ETH_TRANSMIT_STORE_FORWARD(CMD) (((CMD) == ETH_TRANSMITSTOREFORWARD_ENABLE) || \
+ ((CMD) == ETH_TRANSMITSTOREFORWARD_DISABLE))
+#define IS_ETH_TRANSMIT_THRESHOLD_CONTROL(THRESHOLD) (((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_64BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_128BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_192BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_256BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_40BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_32BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_24BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_16BYTES))
+#define IS_ETH_FORWARD_ERROR_FRAMES(CMD) (((CMD) == ETH_FORWARDERRORFRAMES_ENABLE) || \
+ ((CMD) == ETH_FORWARDERRORFRAMES_DISABLE))
+#define IS_ETH_FORWARD_UNDERSIZED_GOOD_FRAMES(CMD) (((CMD) == ETH_FORWARDUNDERSIZEDGOODFRAMES_ENABLE) || \
+ ((CMD) == ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE))
+#define IS_ETH_RECEIVE_THRESHOLD_CONTROL(THRESHOLD) (((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES) || \
+ ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_32BYTES) || \
+ ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_96BYTES) || \
+ ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_128BYTES))
+#define IS_ETH_SECOND_FRAME_OPERATE(CMD) (((CMD) == ETH_SECONDFRAMEOPERARTE_ENABLE) || \
+ ((CMD) == ETH_SECONDFRAMEOPERARTE_DISABLE))
+#define IS_ETH_ADDRESS_ALIGNED_BEATS(CMD) (((CMD) == ETH_ADDRESSALIGNEDBEATS_ENABLE) || \
+ ((CMD) == ETH_ADDRESSALIGNEDBEATS_DISABLE))
+#define IS_ETH_FIXED_BURST(CMD) (((CMD) == ETH_FIXEDBURST_ENABLE) || \
+ ((CMD) == ETH_FIXEDBURST_DISABLE))
+#define IS_ETH_RXDMA_BURST_LENGTH(LENGTH) (((LENGTH) == ETH_RXDMABURSTLENGTH_1BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_2BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_8BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_16BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_32BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_4BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_8BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_16BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_32BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_64BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_128BEAT))
+#define IS_ETH_TXDMA_BURST_LENGTH(LENGTH) (((LENGTH) == ETH_TXDMABURSTLENGTH_1BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_2BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_8BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_16BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_32BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_4BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_8BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_16BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_32BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_64BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_128BEAT))
+#define IS_ETH_DMA_DESC_SKIP_LENGTH(LENGTH) ((LENGTH) <= 0x1F)
+#define IS_ETH_DMA_ARBITRATION_ROUNDROBIN_RXTX(RATIO) (((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1) || \
+ ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_2_1) || \
+ ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_3_1) || \
+ ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_4_1) || \
+ ((RATIO) == ETH_DMAARBITRATION_RXPRIORTX))
+#define IS_ETH_DMATXDESC_GET_FLAG(FLAG) (((FLAG) == ETH_DMATXDESC_OWN) || \
+ ((FLAG) == ETH_DMATXDESC_IC) || \
+ ((FLAG) == ETH_DMATXDESC_LS) || \
+ ((FLAG) == ETH_DMATXDESC_FS) || \
+ ((FLAG) == ETH_DMATXDESC_DC) || \
+ ((FLAG) == ETH_DMATXDESC_DP) || \
+ ((FLAG) == ETH_DMATXDESC_TTSE) || \
+ ((FLAG) == ETH_DMATXDESC_TER) || \
+ ((FLAG) == ETH_DMATXDESC_TCH) || \
+ ((FLAG) == ETH_DMATXDESC_TTSS) || \
+ ((FLAG) == ETH_DMATXDESC_IHE) || \
+ ((FLAG) == ETH_DMATXDESC_ES) || \
+ ((FLAG) == ETH_DMATXDESC_JT) || \
+ ((FLAG) == ETH_DMATXDESC_FF) || \
+ ((FLAG) == ETH_DMATXDESC_PCE) || \
+ ((FLAG) == ETH_DMATXDESC_LCA) || \
+ ((FLAG) == ETH_DMATXDESC_NC) || \
+ ((FLAG) == ETH_DMATXDESC_LCO) || \
+ ((FLAG) == ETH_DMATXDESC_EC) || \
+ ((FLAG) == ETH_DMATXDESC_VF) || \
+ ((FLAG) == ETH_DMATXDESC_CC) || \
+ ((FLAG) == ETH_DMATXDESC_ED) || \
+ ((FLAG) == ETH_DMATXDESC_UF) || \
+ ((FLAG) == ETH_DMATXDESC_DB))
+#define IS_ETH_DMA_TXDESC_SEGMENT(SEGMENT) (((SEGMENT) == ETH_DMATXDESC_LASTSEGMENTS) || \
+ ((SEGMENT) == ETH_DMATXDESC_FIRSTSEGMENT))
+#define IS_ETH_DMA_TXDESC_CHECKSUM(CHECKSUM) (((CHECKSUM) == ETH_DMATXDESC_CHECKSUMBYPASS) || \
+ ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMIPV4HEADER) || \
+ ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT) || \
+ ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL))
+#define IS_ETH_DMATXDESC_BUFFER_SIZE(SIZE) ((SIZE) <= 0x1FFF)
+#define IS_ETH_DMARXDESC_GET_FLAG(FLAG) (((FLAG) == ETH_DMARXDESC_OWN) || \
+ ((FLAG) == ETH_DMARXDESC_AFM) || \
+ ((FLAG) == ETH_DMARXDESC_ES) || \
+ ((FLAG) == ETH_DMARXDESC_DE) || \
+ ((FLAG) == ETH_DMARXDESC_SAF) || \
+ ((FLAG) == ETH_DMARXDESC_LE) || \
+ ((FLAG) == ETH_DMARXDESC_OE) || \
+ ((FLAG) == ETH_DMARXDESC_VLAN) || \
+ ((FLAG) == ETH_DMARXDESC_FS) || \
+ ((FLAG) == ETH_DMARXDESC_LS) || \
+ ((FLAG) == ETH_DMARXDESC_IPV4HCE) || \
+ ((FLAG) == ETH_DMARXDESC_LC) || \
+ ((FLAG) == ETH_DMARXDESC_FT) || \
+ ((FLAG) == ETH_DMARXDESC_RWT) || \
+ ((FLAG) == ETH_DMARXDESC_RE) || \
+ ((FLAG) == ETH_DMARXDESC_DBE) || \
+ ((FLAG) == ETH_DMARXDESC_CE) || \
+ ((FLAG) == ETH_DMARXDESC_MAMPCE))
+#define IS_ETH_DMA_RXDESC_BUFFER(BUFFER) (((BUFFER) == ETH_DMARXDESC_BUFFER1) || \
+ ((BUFFER) == ETH_DMARXDESC_BUFFER2))
+#define IS_ETH_PMT_GET_FLAG(FLAG) (((FLAG) == ETH_PMT_FLAG_WUFR) || \
+ ((FLAG) == ETH_PMT_FLAG_MPR))
+#define IS_ETH_DMA_FLAG(FLAG) ((((FLAG) & (uint32_t)0xC7FE1800) == 0x00) && ((FLAG) != 0x00))
+#define IS_ETH_DMA_GET_FLAG(FLAG) (((FLAG) == ETH_DMA_FLAG_TST) || ((FLAG) == ETH_DMA_FLAG_PMT) || \
+ ((FLAG) == ETH_DMA_FLAG_MMC) || ((FLAG) == ETH_DMA_FLAG_DATATRANSFERERROR) || \
+ ((FLAG) == ETH_DMA_FLAG_READWRITEERROR) || ((FLAG) == ETH_DMA_FLAG_ACCESSERROR) || \
+ ((FLAG) == ETH_DMA_FLAG_NIS) || ((FLAG) == ETH_DMA_FLAG_AIS) || \
+ ((FLAG) == ETH_DMA_FLAG_ER) || ((FLAG) == ETH_DMA_FLAG_FBE) || \
+ ((FLAG) == ETH_DMA_FLAG_ET) || ((FLAG) == ETH_DMA_FLAG_RWT) || \
+ ((FLAG) == ETH_DMA_FLAG_RPS) || ((FLAG) == ETH_DMA_FLAG_RBU) || \
+ ((FLAG) == ETH_DMA_FLAG_R) || ((FLAG) == ETH_DMA_FLAG_TU) || \
+ ((FLAG) == ETH_DMA_FLAG_RO) || ((FLAG) == ETH_DMA_FLAG_TJT) || \
+ ((FLAG) == ETH_DMA_FLAG_TBU) || ((FLAG) == ETH_DMA_FLAG_TPS) || \
+ ((FLAG) == ETH_DMA_FLAG_T))
+#define IS_ETH_MAC_IT(IT) ((((IT) & (uint32_t)0xFFFFFDF1) == 0x00) && ((IT) != 0x00))
+#define IS_ETH_MAC_GET_IT(IT) (((IT) == ETH_MAC_IT_TST) || ((IT) == ETH_MAC_IT_MMCT) || \
+ ((IT) == ETH_MAC_IT_MMCR) || ((IT) == ETH_MAC_IT_MMC) || \
+ ((IT) == ETH_MAC_IT_PMT))
+#define IS_ETH_MAC_GET_FLAG(FLAG) (((FLAG) == ETH_MAC_FLAG_TST) || ((FLAG) == ETH_MAC_FLAG_MMCT) || \
+ ((FLAG) == ETH_MAC_FLAG_MMCR) || ((FLAG) == ETH_MAC_FLAG_MMC) || \
+ ((FLAG) == ETH_MAC_FLAG_PMT))
+#define IS_ETH_DMA_IT(IT) ((((IT) & (uint32_t)0xC7FE1800) == 0x00) && ((IT) != 0x00))
+#define IS_ETH_DMA_GET_IT(IT) (((IT) == ETH_DMA_IT_TST) || ((IT) == ETH_DMA_IT_PMT) || \
+ ((IT) == ETH_DMA_IT_MMC) || ((IT) == ETH_DMA_IT_NIS) || \
+ ((IT) == ETH_DMA_IT_AIS) || ((IT) == ETH_DMA_IT_ER) || \
+ ((IT) == ETH_DMA_IT_FBE) || ((IT) == ETH_DMA_IT_ET) || \
+ ((IT) == ETH_DMA_IT_RWT) || ((IT) == ETH_DMA_IT_RPS) || \
+ ((IT) == ETH_DMA_IT_RBU) || ((IT) == ETH_DMA_IT_R) || \
+ ((IT) == ETH_DMA_IT_TU) || ((IT) == ETH_DMA_IT_RO) || \
+ ((IT) == ETH_DMA_IT_TJT) || ((IT) == ETH_DMA_IT_TBU) || \
+ ((IT) == ETH_DMA_IT_TPS) || ((IT) == ETH_DMA_IT_T))
+#define IS_ETH_DMA_GET_OVERFLOW(OVERFLOW) (((OVERFLOW) == ETH_DMA_OVERFLOW_RXFIFOCOUNTER) || \
+ ((OVERFLOW) == ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER))
+#define IS_ETH_MMC_IT(IT) (((((IT) & (uint32_t)0xFFDF3FFF) == 0x00) || (((IT) & (uint32_t)0xEFFDFF9F) == 0x00)) && \
+ ((IT) != 0x00))
+#define IS_ETH_MMC_GET_IT(IT) (((IT) == ETH_MMC_IT_TGF) || ((IT) == ETH_MMC_IT_TGFMSC) || \
+ ((IT) == ETH_MMC_IT_TGFSC) || ((IT) == ETH_MMC_IT_RGUF) || \
+ ((IT) == ETH_MMC_IT_RFAE) || ((IT) == ETH_MMC_IT_RFCE))
+#define IS_ETH_ENHANCED_DESCRIPTOR_FORMAT(CMD) (((CMD) == ETH_DMAENHANCEDDESCRIPTOR_ENABLE) || \
+ ((CMD) == ETH_DMAENHANCEDDESCRIPTOR_DISABLE))
+
+
+/**
+ * @}
+ */
+
+/** @addtogroup ETH_Private_Defines
+ * @{
+ */
+/* Delay to wait when writing to some Ethernet registers */
+#define ETH_REG_WRITE_DELAY ((uint32_t)0x00000001)
+
+/* ETHERNET Errors */
+#define ETH_SUCCESS ((uint32_t)0)
+#define ETH_ERROR ((uint32_t)1)
+
+/* ETHERNET DMA Tx descriptors Collision Count Shift */
+#define ETH_DMATXDESC_COLLISION_COUNTSHIFT ((uint32_t)3)
+
+/* ETHERNET DMA Tx descriptors Buffer2 Size Shift */
+#define ETH_DMATXDESC_BUFFER2_SIZESHIFT ((uint32_t)16)
+
+/* ETHERNET DMA Rx descriptors Frame Length Shift */
+#define ETH_DMARXDESC_FRAME_LENGTHSHIFT ((uint32_t)16)
+
+/* ETHERNET DMA Rx descriptors Buffer2 Size Shift */
+#define ETH_DMARXDESC_BUFFER2_SIZESHIFT ((uint32_t)16)
+
+/* ETHERNET DMA Rx descriptors Frame length Shift */
+#define ETH_DMARXDESC_FRAMELENGTHSHIFT ((uint32_t)16)
+
+/* ETHERNET MAC address offsets */
+#define ETH_MAC_ADDR_HBASE (uint32_t)(ETH_MAC_BASE + (uint32_t)0x40) /* ETHERNET MAC address high offset */
+#define ETH_MAC_ADDR_LBASE (uint32_t)(ETH_MAC_BASE + (uint32_t)0x44) /* ETHERNET MAC address low offset */
+
+/* ETHERNET MACMIIAR register Mask */
+#define ETH_MACMIIAR_CR_MASK ((uint32_t)0xFFFFFFE3)
+
+/* ETHERNET MACCR register Mask */
+#define ETH_MACCR_CLEAR_MASK ((uint32_t)0xFF20810F)
+
+/* ETHERNET MACFCR register Mask */
+#define ETH_MACFCR_CLEAR_MASK ((uint32_t)0x0000FF41)
+
+/* ETHERNET DMAOMR register Mask */
+#define ETH_DMAOMR_CLEAR_MASK ((uint32_t)0xF8DE3F23)
+
+/* ETHERNET Remote Wake-up frame register length */
+#define ETH_WAKEUP_REGISTER_LENGTH 8
+
+/* ETHERNET Missed frames counter Shift */
+#define ETH_DMA_RX_OVERFLOW_MISSEDFRAMES_COUNTERSHIFT 17
+ /**
+ * @}
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup ETH_Exported_Types ETH Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_ETH_STATE_RESET = 0x00, /*!< Peripheral not yet Initialized or disabled */
+ HAL_ETH_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_ETH_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_ETH_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_ETH_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_ETH_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_ETH_STATE_BUSY_WR = 0x42, /*!< Write process is ongoing */
+ HAL_ETH_STATE_BUSY_RD = 0x82, /*!< Read process is ongoing */
+ HAL_ETH_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_ETH_STATE_ERROR = 0x04 /*!< Reception process is ongoing */
+}HAL_ETH_StateTypeDef;
+
+/**
+ * @brief ETH Init Structure definition
+ */
+
+typedef struct
+{
+ uint32_t AutoNegotiation; /*!< Selects or not the AutoNegotiation mode for the external PHY
+ The AutoNegotiation allows an automatic setting of the Speed (10/100Mbps)
+ and the mode (half/full-duplex).
+ This parameter can be a value of @ref ETH_AutoNegotiation */
+
+ uint32_t Speed; /*!< Sets the Ethernet speed: 10/100 Mbps.
+ This parameter can be a value of @ref ETH_Speed */
+
+ uint32_t DuplexMode; /*!< Selects the MAC duplex mode: Half-Duplex or Full-Duplex mode
+ This parameter can be a value of @ref ETH_Duplex_Mode */
+
+ uint16_t PhyAddress; /*!< Ethernet PHY address.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 32 */
+
+ uint8_t *MACAddr; /*!< MAC Address of used Hardware: must be pointer on an array of 6 bytes */
+
+ uint32_t RxMode; /*!< Selects the Ethernet Rx mode: Polling mode, Interrupt mode.
+ This parameter can be a value of @ref ETH_Rx_Mode */
+
+ uint32_t ChecksumMode; /*!< Selects if the checksum is check by hardware or by software.
+ This parameter can be a value of @ref ETH_Checksum_Mode */
+
+ uint32_t MediaInterface ; /*!< Selects the media-independent interface or the reduced media-independent interface.
+ This parameter can be a value of @ref ETH_Media_Interface */
+
+} ETH_InitTypeDef;
+
+
+ /**
+ * @brief ETH MAC Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t Watchdog; /*!< Selects or not the Watchdog timer
+ When enabled, the MAC allows no more then 2048 bytes to be received.
+ When disabled, the MAC can receive up to 16384 bytes.
+ This parameter can be a value of @ref ETH_Watchdog */
+
+ uint32_t Jabber; /*!< Selects or not Jabber timer
+ When enabled, the MAC allows no more then 2048 bytes to be sent.
+ When disabled, the MAC can send up to 16384 bytes.
+ This parameter can be a value of @ref ETH_Jabber */
+
+ uint32_t InterFrameGap; /*!< Selects the minimum IFG between frames during transmission.
+ This parameter can be a value of @ref ETH_Inter_Frame_Gap */
+
+ uint32_t CarrierSense; /*!< Selects or not the Carrier Sense.
+ This parameter can be a value of @ref ETH_Carrier_Sense */
+
+ uint32_t ReceiveOwn; /*!< Selects or not the ReceiveOwn,
+ ReceiveOwn allows the reception of frames when the TX_EN signal is asserted
+ in Half-Duplex mode.
+ This parameter can be a value of @ref ETH_Receive_Own */
+
+ uint32_t LoopbackMode; /*!< Selects or not the internal MAC MII Loopback mode.
+ This parameter can be a value of @ref ETH_Loop_Back_Mode */
+
+ uint32_t ChecksumOffload; /*!< Selects or not the IPv4 checksum checking for received frame payloads' TCP/UDP/ICMP headers.
+ This parameter can be a value of @ref ETH_Checksum_Offload */
+
+ uint32_t RetryTransmission; /*!< Selects or not the MAC attempt retries transmission, based on the settings of BL,
+ when a collision occurs (Half-Duplex mode).
+ This parameter can be a value of @ref ETH_Retry_Transmission */
+
+ uint32_t AutomaticPadCRCStrip; /*!< Selects or not the Automatic MAC Pad/CRC Stripping.
+ This parameter can be a value of @ref ETH_Automatic_Pad_CRC_Strip */
+
+ uint32_t BackOffLimit; /*!< Selects the BackOff limit value.
+ This parameter can be a value of @ref ETH_Back_Off_Limit */
+
+ uint32_t DeferralCheck; /*!< Selects or not the deferral check function (Half-Duplex mode).
+ This parameter can be a value of @ref ETH_Deferral_Check */
+
+ uint32_t ReceiveAll; /*!< Selects or not all frames reception by the MAC (No filtering).
+ This parameter can be a value of @ref ETH_Receive_All */
+
+ uint32_t SourceAddrFilter; /*!< Selects the Source Address Filter mode.
+ This parameter can be a value of @ref ETH_Source_Addr_Filter */
+
+ uint32_t PassControlFrames; /*!< Sets the forwarding mode of the control frames (including unicast and multicast PAUSE frames)
+ This parameter can be a value of @ref ETH_Pass_Control_Frames */
+
+ uint32_t BroadcastFramesReception; /*!< Selects or not the reception of Broadcast Frames.
+ This parameter can be a value of @ref ETH_Broadcast_Frames_Reception */
+
+ uint32_t DestinationAddrFilter; /*!< Sets the destination filter mode for both unicast and multicast frames.
+ This parameter can be a value of @ref ETH_Destination_Addr_Filter */
+
+ uint32_t PromiscuousMode; /*!< Selects or not the Promiscuous Mode
+ This parameter can be a value of @ref ETH_Promiscuous_Mode */
+
+ uint32_t MulticastFramesFilter; /*!< Selects the Multicast Frames filter mode: None/HashTableFilter/PerfectFilter/PerfectHashTableFilter.
+ This parameter can be a value of @ref ETH_Multicast_Frames_Filter */
+
+ uint32_t UnicastFramesFilter; /*!< Selects the Unicast Frames filter mode: HashTableFilter/PerfectFilter/PerfectHashTableFilter.
+ This parameter can be a value of @ref ETH_Unicast_Frames_Filter */
+
+ uint32_t HashTableHigh; /*!< This field holds the higher 32 bits of Hash table.
+ This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFFFFFF */
+
+ uint32_t HashTableLow; /*!< This field holds the lower 32 bits of Hash table.
+ This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFFFFFF */
+
+ uint32_t PauseTime; /*!< This field holds the value to be used in the Pause Time field in the transmit control frame.
+ This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFF */
+
+ uint32_t ZeroQuantaPause; /*!< Selects or not the automatic generation of Zero-Quanta Pause Control frames.
+ This parameter can be a value of @ref ETH_Zero_Quanta_Pause */
+
+ uint32_t PauseLowThreshold; /*!< This field configures the threshold of the PAUSE to be checked for
+ automatic retransmission of PAUSE Frame.
+ This parameter can be a value of @ref ETH_Pause_Low_Threshold */
+
+ uint32_t UnicastPauseFrameDetect; /*!< Selects or not the MAC detection of the Pause frames (with MAC Address0
+ unicast address and unique multicast address).
+ This parameter can be a value of @ref ETH_Unicast_Pause_Frame_Detect */
+
+ uint32_t ReceiveFlowControl; /*!< Enables or disables the MAC to decode the received Pause frame and
+ disable its transmitter for a specified time (Pause Time)
+ This parameter can be a value of @ref ETH_Receive_Flow_Control */
+
+ uint32_t TransmitFlowControl; /*!< Enables or disables the MAC to transmit Pause frames (Full-Duplex mode)
+ or the MAC back-pressure operation (Half-Duplex mode)
+ This parameter can be a value of @ref ETH_Transmit_Flow_Control */
+
+ uint32_t VLANTagComparison; /*!< Selects the 12-bit VLAN identifier or the complete 16-bit VLAN tag for
+ comparison and filtering.
+ This parameter can be a value of @ref ETH_VLAN_Tag_Comparison */
+
+ uint32_t VLANTagIdentifier; /*!< Holds the VLAN tag identifier for receive frames */
+
+} ETH_MACInitTypeDef;
+
+
+/**
+ * @brief ETH DMA Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t DropTCPIPChecksumErrorFrame; /*!< Selects or not the Dropping of TCP/IP Checksum Error Frames.
+ This parameter can be a value of @ref ETH_Drop_TCP_IP_Checksum_Error_Frame */
+
+ uint32_t ReceiveStoreForward; /*!< Enables or disables the Receive store and forward mode.
+ This parameter can be a value of @ref ETH_Receive_Store_Forward */
+
+ uint32_t FlushReceivedFrame; /*!< Enables or disables the flushing of received frames.
+ This parameter can be a value of @ref ETH_Flush_Received_Frame */
+
+ uint32_t TransmitStoreForward; /*!< Enables or disables Transmit store and forward mode.
+ This parameter can be a value of @ref ETH_Transmit_Store_Forward */
+
+ uint32_t TransmitThresholdControl; /*!< Selects or not the Transmit Threshold Control.
+ This parameter can be a value of @ref ETH_Transmit_Threshold_Control */
+
+ uint32_t ForwardErrorFrames; /*!< Selects or not the forward to the DMA of erroneous frames.
+ This parameter can be a value of @ref ETH_Forward_Error_Frames */
+
+ uint32_t ForwardUndersizedGoodFrames; /*!< Enables or disables the Rx FIFO to forward Undersized frames (frames with no Error
+ and length less than 64 bytes) including pad-bytes and CRC)
+ This parameter can be a value of @ref ETH_Forward_Undersized_Good_Frames */
+
+ uint32_t ReceiveThresholdControl; /*!< Selects the threshold level of the Receive FIFO.
+ This parameter can be a value of @ref ETH_Receive_Threshold_Control */
+
+ uint32_t SecondFrameOperate; /*!< Selects or not the Operate on second frame mode, which allows the DMA to process a second
+ frame of Transmit data even before obtaining the status for the first frame.
+ This parameter can be a value of @ref ETH_Second_Frame_Operate */
+
+ uint32_t AddressAlignedBeats; /*!< Enables or disables the Address Aligned Beats.
+ This parameter can be a value of @ref ETH_Address_Aligned_Beats */
+
+ uint32_t FixedBurst; /*!< Enables or disables the AHB Master interface fixed burst transfers.
+ This parameter can be a value of @ref ETH_Fixed_Burst */
+
+ uint32_t RxDMABurstLength; /*!< Indicates the maximum number of beats to be transferred in one Rx DMA transaction.
+ This parameter can be a value of @ref ETH_Rx_DMA_Burst_Length */
+
+ uint32_t TxDMABurstLength; /*!< Indicates the maximum number of beats to be transferred in one Tx DMA transaction.
+ This parameter can be a value of @ref ETH_Tx_DMA_Burst_Length */
+
+ uint32_t EnhancedDescriptorFormat; /*!< Enables the enhanced descriptor format.
+ This parameter can be a value of @ref ETH_DMA_Enhanced_descriptor_format */
+
+ uint32_t DescriptorSkipLength; /*!< Specifies the number of word to skip between two unchained descriptors (Ring mode)
+ This parameter must be a number between Min_Data = 0 and Max_Data = 32 */
+
+ uint32_t DMAArbitration; /*!< Selects the DMA Tx/Rx arbitration.
+ This parameter can be a value of @ref ETH_DMA_Arbitration */
+} ETH_DMAInitTypeDef;
+
+
+/**
+ * @brief ETH DMA Descriptors data structure definition
+ */
+
+typedef struct
+{
+ __IO uint32_t Status; /*!< Status */
+
+ uint32_t ControlBufferSize; /*!< Control and Buffer1, Buffer2 lengths */
+
+ uint32_t Buffer1Addr; /*!< Buffer1 address pointer */
+
+ uint32_t Buffer2NextDescAddr; /*!< Buffer2 or next descriptor address pointer */
+
+ /*!< Enhanced ETHERNET DMA PTP Descriptors */
+ uint32_t ExtendedStatus; /*!< Extended status for PTP receive descriptor */
+
+ uint32_t Reserved1; /*!< Reserved */
+
+ uint32_t TimeStampLow; /*!< Time Stamp Low value for transmit and receive */
+
+ uint32_t TimeStampHigh; /*!< Time Stamp High value for transmit and receive */
+
+} ETH_DMADescTypeDef;
+
+
+/**
+ * @brief Received Frame Informations structure definition
+ */
+typedef struct
+{
+ ETH_DMADescTypeDef *FSRxDesc; /*!< First Segment Rx Desc */
+
+ ETH_DMADescTypeDef *LSRxDesc; /*!< Last Segment Rx Desc */
+
+ uint32_t SegCount; /*!< Segment count */
+
+ uint32_t length; /*!< Frame length */
+
+ uint32_t buffer; /*!< Frame buffer */
+
+} ETH_DMARxFrameInfos;
+
+
+/**
+ * @brief ETH Handle Structure definition
+ */
+
+typedef struct
+{
+ ETH_TypeDef *Instance; /*!< Register base address */
+
+ ETH_InitTypeDef Init; /*!< Ethernet Init Configuration */
+
+ uint32_t LinkStatus; /*!< Ethernet link status */
+
+ ETH_DMADescTypeDef *RxDesc; /*!< Rx descriptor to Get */
+
+ ETH_DMADescTypeDef *TxDesc; /*!< Tx descriptor to Set */
+
+ ETH_DMARxFrameInfos RxFrameInfos; /*!< last Rx frame infos */
+
+ __IO HAL_ETH_StateTypeDef State; /*!< ETH communication state */
+
+ HAL_LockTypeDef Lock; /*!< ETH Lock */
+
+} ETH_HandleTypeDef;
+
+ /**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup ETH_Exported_Constants ETH Exported Constants
+ * @{
+ */
+
+/** @defgroup ETH_Buffers_setting ETH Buffers setting
+ * @{
+ */
+#define ETH_MAX_PACKET_SIZE ((uint32_t)1524) /*!< ETH_HEADER + ETH_EXTRA + ETH_VLAN_TAG + ETH_MAX_ETH_PAYLOAD + ETH_CRC */
+#define ETH_HEADER ((uint32_t)14) /*!< 6 byte Dest addr, 6 byte Src addr, 2 byte length/type */
+#define ETH_CRC ((uint32_t)4) /*!< Ethernet CRC */
+#define ETH_EXTRA ((uint32_t)2) /*!< Extra bytes in some cases */
+#define ETH_VLAN_TAG ((uint32_t)4) /*!< optional 802.1q VLAN Tag */
+#define ETH_MIN_ETH_PAYLOAD ((uint32_t)46) /*!< Minimum Ethernet payload size */
+#define ETH_MAX_ETH_PAYLOAD ((uint32_t)1500) /*!< Maximum Ethernet payload size */
+#define ETH_JUMBO_FRAME_PAYLOAD ((uint32_t)9000) /*!< Jumbo frame payload size */
+
+ /* Ethernet driver receive buffers are organized in a chained linked-list, when
+ an ethernet packet is received, the Rx-DMA will transfer the packet from RxFIFO
+ to the driver receive buffers memory.
+
+ Depending on the size of the received ethernet packet and the size of
+ each ethernet driver receive buffer, the received packet can take one or more
+ ethernet driver receive buffer.
+
+ In below are defined the size of one ethernet driver receive buffer ETH_RX_BUF_SIZE
+ and the total count of the driver receive buffers ETH_RXBUFNB.
+
+ The configured value for ETH_RX_BUF_SIZE and ETH_RXBUFNB are only provided as
+ example, they can be reconfigured in the application layer to fit the application
+ needs */
+
+/* Here we configure each Ethernet driver receive buffer to fit the Max size Ethernet
+ packet */
+#ifndef ETH_RX_BUF_SIZE
+ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE
+#endif
+
+/* 5 Ethernet driver receive buffers are used (in a chained linked list)*/
+#ifndef ETH_RXBUFNB
+ #define ETH_RXBUFNB ((uint32_t)5 /* 5 Rx buffers of size ETH_RX_BUF_SIZE */
+#endif
+
+
+ /* Ethernet driver transmit buffers are organized in a chained linked-list, when
+ an ethernet packet is transmitted, Tx-DMA will transfer the packet from the
+ driver transmit buffers memory to the TxFIFO.
+
+ Depending on the size of the Ethernet packet to be transmitted and the size of
+ each ethernet driver transmit buffer, the packet to be transmitted can take
+ one or more ethernet driver transmit buffer.
+
+ In below are defined the size of one ethernet driver transmit buffer ETH_TX_BUF_SIZE
+ and the total count of the driver transmit buffers ETH_TXBUFNB.
+
+ The configured value for ETH_TX_BUF_SIZE and ETH_TXBUFNB are only provided as
+ example, they can be reconfigured in the application layer to fit the application
+ needs */
+
+/* Here we configure each Ethernet driver transmit buffer to fit the Max size Ethernet
+ packet */
+#ifndef ETH_TX_BUF_SIZE
+ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE
+#endif
+
+/* 5 ethernet driver transmit buffers are used (in a chained linked list)*/
+#ifndef ETH_TXBUFNB
+ #define ETH_TXBUFNB ((uint32_t)5 /* 5 Tx buffers of size ETH_TX_BUF_SIZE */
+#endif
+
+ /**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_TX_Descriptor ETH DMA TX Descriptor
+ * @{
+ */
+
+/*
+ DMA Tx Descriptor
+ -----------------------------------------------------------------------------------------------
+ TDES0 | OWN(31) | CTRL[30:26] | Reserved[25:24] | CTRL[23:20] | Reserved[19:17] | Status[16:0] |
+ -----------------------------------------------------------------------------------------------
+ TDES1 | Reserved[31:29] | Buffer2 ByteCount[28:16] | Reserved[15:13] | Buffer1 ByteCount[12:0] |
+ -----------------------------------------------------------------------------------------------
+ TDES2 | Buffer1 Address [31:0] |
+ -----------------------------------------------------------------------------------------------
+ TDES3 | Buffer2 Address [31:0] / Next Descriptor Address [31:0] |
+ -----------------------------------------------------------------------------------------------
+*/
+
+/**
+ * @brief Bit definition of TDES0 register: DMA Tx descriptor status register
+ */
+#define ETH_DMATXDESC_OWN ((uint32_t)0x80000000) /*!< OWN bit: descriptor is owned by DMA engine */
+#define ETH_DMATXDESC_IC ((uint32_t)0x40000000) /*!< Interrupt on Completion */
+#define ETH_DMATXDESC_LS ((uint32_t)0x20000000) /*!< Last Segment */
+#define ETH_DMATXDESC_FS ((uint32_t)0x10000000) /*!< First Segment */
+#define ETH_DMATXDESC_DC ((uint32_t)0x08000000) /*!< Disable CRC */
+#define ETH_DMATXDESC_DP ((uint32_t)0x04000000) /*!< Disable Padding */
+#define ETH_DMATXDESC_TTSE ((uint32_t)0x02000000) /*!< Transmit Time Stamp Enable */
+#define ETH_DMATXDESC_CIC ((uint32_t)0x00C00000) /*!< Checksum Insertion Control: 4 cases */
+#define ETH_DMATXDESC_CIC_BYPASS ((uint32_t)0x00000000) /*!< Do Nothing: Checksum Engine is bypassed */
+#define ETH_DMATXDESC_CIC_IPV4HEADER ((uint32_t)0x00400000) /*!< IPV4 header Checksum Insertion */
+#define ETH_DMATXDESC_CIC_TCPUDPICMP_SEGMENT ((uint32_t)0x00800000) /*!< TCP/UDP/ICMP Checksum Insertion calculated over segment only */
+#define ETH_DMATXDESC_CIC_TCPUDPICMP_FULL ((uint32_t)0x00C00000) /*!< TCP/UDP/ICMP Checksum Insertion fully calculated */
+#define ETH_DMATXDESC_TER ((uint32_t)0x00200000) /*!< Transmit End of Ring */
+#define ETH_DMATXDESC_TCH ((uint32_t)0x00100000) /*!< Second Address Chained */
+#define ETH_DMATXDESC_TTSS ((uint32_t)0x00020000) /*!< Tx Time Stamp Status */
+#define ETH_DMATXDESC_IHE ((uint32_t)0x00010000) /*!< IP Header Error */
+#define ETH_DMATXDESC_ES ((uint32_t)0x00008000) /*!< Error summary: OR of the following bits: UE || ED || EC || LCO || NC || LCA || FF || JT */
+#define ETH_DMATXDESC_JT ((uint32_t)0x00004000) /*!< Jabber Timeout */
+#define ETH_DMATXDESC_FF ((uint32_t)0x00002000) /*!< Frame Flushed: DMA/MTL flushed the frame due to SW flush */
+#define ETH_DMATXDESC_PCE ((uint32_t)0x00001000) /*!< Payload Checksum Error */
+#define ETH_DMATXDESC_LCA ((uint32_t)0x00000800) /*!< Loss of Carrier: carrier lost during transmission */
+#define ETH_DMATXDESC_NC ((uint32_t)0x00000400) /*!< No Carrier: no carrier signal from the transceiver */
+#define ETH_DMATXDESC_LCO ((uint32_t)0x00000200) /*!< Late Collision: transmission aborted due to collision */
+#define ETH_DMATXDESC_EC ((uint32_t)0x00000100) /*!< Excessive Collision: transmission aborted after 16 collisions */
+#define ETH_DMATXDESC_VF ((uint32_t)0x00000080) /*!< VLAN Frame */
+#define ETH_DMATXDESC_CC ((uint32_t)0x00000078) /*!< Collision Count */
+#define ETH_DMATXDESC_ED ((uint32_t)0x00000004) /*!< Excessive Deferral */
+#define ETH_DMATXDESC_UF ((uint32_t)0x00000002) /*!< Underflow Error: late data arrival from the memory */
+#define ETH_DMATXDESC_DB ((uint32_t)0x00000001) /*!< Deferred Bit */
+
+/**
+ * @brief Bit definition of TDES1 register
+ */
+#define ETH_DMATXDESC_TBS2 ((uint32_t)0x1FFF0000) /*!< Transmit Buffer2 Size */
+#define ETH_DMATXDESC_TBS1 ((uint32_t)0x00001FFF) /*!< Transmit Buffer1 Size */
+
+/**
+ * @brief Bit definition of TDES2 register
+ */
+#define ETH_DMATXDESC_B1AP ((uint32_t)0xFFFFFFFF) /*!< Buffer1 Address Pointer */
+
+/**
+ * @brief Bit definition of TDES3 register
+ */
+#define ETH_DMATXDESC_B2AP ((uint32_t)0xFFFFFFFF) /*!< Buffer2 Address Pointer */
+
+ /*---------------------------------------------------------------------------------------------
+ TDES6 | Transmit Time Stamp Low [31:0] |
+ -----------------------------------------------------------------------------------------------
+ TDES7 | Transmit Time Stamp High [31:0] |
+ ----------------------------------------------------------------------------------------------*/
+
+/* Bit definition of TDES6 register */
+ #define ETH_DMAPTPTXDESC_TTSL ((uint32_t)0xFFFFFFFF) /* Transmit Time Stamp Low */
+
+/* Bit definition of TDES7 register */
+ #define ETH_DMAPTPTXDESC_TTSH ((uint32_t)0xFFFFFFFF) /* Transmit Time Stamp High */
+
+/**
+ * @}
+ */
+/** @defgroup ETH_DMA_RX_Descriptor ETH DMA RX Descriptor
+ * @{
+ */
+
+/*
+ DMA Rx Descriptor
+ --------------------------------------------------------------------------------------------------------------------
+ RDES0 | OWN(31) | Status [30:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES1 | CTRL(31) | Reserved[30:29] | Buffer2 ByteCount[28:16] | CTRL[15:14] | Reserved(13) | Buffer1 ByteCount[12:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES2 | Buffer1 Address [31:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES3 | Buffer2 Address [31:0] / Next Descriptor Address [31:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+*/
+
+/**
+ * @brief Bit definition of RDES0 register: DMA Rx descriptor status register
+ */
+#define ETH_DMARXDESC_OWN ((uint32_t)0x80000000) /*!< OWN bit: descriptor is owned by DMA engine */
+#define ETH_DMARXDESC_AFM ((uint32_t)0x40000000) /*!< DA Filter Fail for the rx frame */
+#define ETH_DMARXDESC_FL ((uint32_t)0x3FFF0000) /*!< Receive descriptor frame length */
+#define ETH_DMARXDESC_ES ((uint32_t)0x00008000) /*!< Error summary: OR of the following bits: DE || OE || IPC || LC || RWT || RE || CE */
+#define ETH_DMARXDESC_DE ((uint32_t)0x00004000) /*!< Descriptor error: no more descriptors for receive frame */
+#define ETH_DMARXDESC_SAF ((uint32_t)0x00002000) /*!< SA Filter Fail for the received frame */
+#define ETH_DMARXDESC_LE ((uint32_t)0x00001000) /*!< Frame size not matching with length field */
+#define ETH_DMARXDESC_OE ((uint32_t)0x00000800) /*!< Overflow Error: Frame was damaged due to buffer overflow */
+#define ETH_DMARXDESC_VLAN ((uint32_t)0x00000400) /*!< VLAN Tag: received frame is a VLAN frame */
+#define ETH_DMARXDESC_FS ((uint32_t)0x00000200) /*!< First descriptor of the frame */
+#define ETH_DMARXDESC_LS ((uint32_t)0x00000100) /*!< Last descriptor of the frame */
+#define ETH_DMARXDESC_IPV4HCE ((uint32_t)0x00000080) /*!< IPC Checksum Error: Rx Ipv4 header checksum error */
+#define ETH_DMARXDESC_LC ((uint32_t)0x00000040) /*!< Late collision occurred during reception */
+#define ETH_DMARXDESC_FT ((uint32_t)0x00000020) /*!< Frame type - Ethernet, otherwise 802.3 */
+#define ETH_DMARXDESC_RWT ((uint32_t)0x00000010) /*!< Receive Watchdog Timeout: watchdog timer expired during reception */
+#define ETH_DMARXDESC_RE ((uint32_t)0x00000008) /*!< Receive error: error reported by MII interface */
+#define ETH_DMARXDESC_DBE ((uint32_t)0x00000004) /*!< Dribble bit error: frame contains non int multiple of 8 bits */
+#define ETH_DMARXDESC_CE ((uint32_t)0x00000002) /*!< CRC error */
+#define ETH_DMARXDESC_MAMPCE ((uint32_t)0x00000001) /*!< Rx MAC Address/Payload Checksum Error: Rx MAC address matched/ Rx Payload Checksum Error */
+
+/**
+ * @brief Bit definition of RDES1 register
+ */
+#define ETH_DMARXDESC_DIC ((uint32_t)0x80000000) /*!< Disable Interrupt on Completion */
+#define ETH_DMARXDESC_RBS2 ((uint32_t)0x1FFF0000) /*!< Receive Buffer2 Size */
+#define ETH_DMARXDESC_RER ((uint32_t)0x00008000) /*!< Receive End of Ring */
+#define ETH_DMARXDESC_RCH ((uint32_t)0x00004000) /*!< Second Address Chained */
+#define ETH_DMARXDESC_RBS1 ((uint32_t)0x00001FFF) /*!< Receive Buffer1 Size */
+
+/**
+ * @brief Bit definition of RDES2 register
+ */
+#define ETH_DMARXDESC_B1AP ((uint32_t)0xFFFFFFFF) /*!< Buffer1 Address Pointer */
+
+/**
+ * @brief Bit definition of RDES3 register
+ */
+#define ETH_DMARXDESC_B2AP ((uint32_t)0xFFFFFFFF) /*!< Buffer2 Address Pointer */
+
+/*---------------------------------------------------------------------------------------------------------------------
+ RDES4 | Reserved[31:15] | Extended Status [14:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES5 | Reserved[31:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES6 | Receive Time Stamp Low [31:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES7 | Receive Time Stamp High [31:0] |
+ --------------------------------------------------------------------------------------------------------------------*/
+
+/* Bit definition of RDES4 register */
+#define ETH_DMAPTPRXDESC_PTPV ((uint32_t)0x00002000) /* PTP Version */
+#define ETH_DMAPTPRXDESC_PTPFT ((uint32_t)0x00001000) /* PTP Frame Type */
+#define ETH_DMAPTPRXDESC_PTPMT ((uint32_t)0x00000F00) /* PTP Message Type */
+ #define ETH_DMAPTPRXDESC_PTPMT_SYNC ((uint32_t)0x00000100) /* SYNC message (all clock types) */
+ #define ETH_DMAPTPRXDESC_PTPMT_FOLLOWUP ((uint32_t)0x00000200) /* FollowUp message (all clock types) */
+ #define ETH_DMAPTPRXDESC_PTPMT_DELAYREQ ((uint32_t)0x00000300) /* DelayReq message (all clock types) */
+ #define ETH_DMAPTPRXDESC_PTPMT_DELAYRESP ((uint32_t)0x00000400) /* DelayResp message (all clock types) */
+ #define ETH_DMAPTPRXDESC_PTPMT_PDELAYREQ_ANNOUNCE ((uint32_t)0x00000500) /* PdelayReq message (peer-to-peer transparent clock) or Announce message (Ordinary or Boundary clock) */
+ #define ETH_DMAPTPRXDESC_PTPMT_PDELAYRESP_MANAG ((uint32_t)0x00000600) /* PdelayResp message (peer-to-peer transparent clock) or Management message (Ordinary or Boundary clock) */
+ #define ETH_DMAPTPRXDESC_PTPMT_PDELAYRESPFOLLOWUP_SIGNAL ((uint32_t)0x00000700) /* PdelayRespFollowUp message (peer-to-peer transparent clock) or Signaling message (Ordinary or Boundary clock) */
+#define ETH_DMAPTPRXDESC_IPV6PR ((uint32_t)0x00000080) /* IPv6 Packet Received */
+#define ETH_DMAPTPRXDESC_IPV4PR ((uint32_t)0x00000040) /* IPv4 Packet Received */
+#define ETH_DMAPTPRXDESC_IPCB ((uint32_t)0x00000020) /* IP Checksum Bypassed */
+#define ETH_DMAPTPRXDESC_IPPE ((uint32_t)0x00000010) /* IP Payload Error */
+#define ETH_DMAPTPRXDESC_IPHE ((uint32_t)0x00000008) /* IP Header Error */
+#define ETH_DMAPTPRXDESC_IPPT ((uint32_t)0x00000007) /* IP Payload Type */
+ #define ETH_DMAPTPRXDESC_IPPT_UDP ((uint32_t)0x00000001) /* UDP payload encapsulated in the IP datagram */
+ #define ETH_DMAPTPRXDESC_IPPT_TCP ((uint32_t)0x00000002) /* TCP payload encapsulated in the IP datagram */
+ #define ETH_DMAPTPRXDESC_IPPT_ICMP ((uint32_t)0x00000003) /* ICMP payload encapsulated in the IP datagram */
+
+/* Bit definition of RDES6 register */
+#define ETH_DMAPTPRXDESC_RTSL ((uint32_t)0xFFFFFFFF) /* Receive Time Stamp Low */
+
+/* Bit definition of RDES7 register */
+#define ETH_DMAPTPRXDESC_RTSH ((uint32_t)0xFFFFFFFF) /* Receive Time Stamp High */
+/**
+ * @}
+ */
+ /** @defgroup ETH_AutoNegotiation ETH AutoNegotiation
+ * @{
+ */
+#define ETH_AUTONEGOTIATION_ENABLE ((uint32_t)0x00000001)
+#define ETH_AUTONEGOTIATION_DISABLE ((uint32_t)0x00000000)
+
+/**
+ * @}
+ */
+/** @defgroup ETH_Speed ETH Speed
+ * @{
+ */
+#define ETH_SPEED_10M ((uint32_t)0x00000000)
+#define ETH_SPEED_100M ((uint32_t)0x00004000)
+
+/**
+ * @}
+ */
+/** @defgroup ETH_Duplex_Mode ETH Duplex Mode
+ * @{
+ */
+#define ETH_MODE_FULLDUPLEX ((uint32_t)0x00000800)
+#define ETH_MODE_HALFDUPLEX ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+/** @defgroup ETH_Rx_Mode ETH Rx Mode
+ * @{
+ */
+#define ETH_RXPOLLING_MODE ((uint32_t)0x00000000)
+#define ETH_RXINTERRUPT_MODE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Checksum_Mode ETH Checksum Mode
+ * @{
+ */
+#define ETH_CHECKSUM_BY_HARDWARE ((uint32_t)0x00000000)
+#define ETH_CHECKSUM_BY_SOFTWARE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Media_Interface ETH Media Interface
+ * @{
+ */
+#define ETH_MEDIA_INTERFACE_MII ((uint32_t)0x00000000)
+#define ETH_MEDIA_INTERFACE_RMII ((uint32_t)SYSCFG_PMC_MII_RMII_SEL)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Watchdog ETH Watchdog
+ * @{
+ */
+#define ETH_WATCHDOG_ENABLE ((uint32_t)0x00000000)
+#define ETH_WATCHDOG_DISABLE ((uint32_t)0x00800000)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Jabber ETH Jabber
+ * @{
+ */
+#define ETH_JABBER_ENABLE ((uint32_t)0x00000000)
+#define ETH_JABBER_DISABLE ((uint32_t)0x00400000)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Inter_Frame_Gap ETH Inter Frame Gap
+ * @{
+ */
+#define ETH_INTERFRAMEGAP_96BIT ((uint32_t)0x00000000) /*!< minimum IFG between frames during transmission is 96Bit */
+#define ETH_INTERFRAMEGAP_88BIT ((uint32_t)0x00020000) /*!< minimum IFG between frames during transmission is 88Bit */
+#define ETH_INTERFRAMEGAP_80BIT ((uint32_t)0x00040000) /*!< minimum IFG between frames during transmission is 80Bit */
+#define ETH_INTERFRAMEGAP_72BIT ((uint32_t)0x00060000) /*!< minimum IFG between frames during transmission is 72Bit */
+#define ETH_INTERFRAMEGAP_64BIT ((uint32_t)0x00080000) /*!< minimum IFG between frames during transmission is 64Bit */
+#define ETH_INTERFRAMEGAP_56BIT ((uint32_t)0x000A0000) /*!< minimum IFG between frames during transmission is 56Bit */
+#define ETH_INTERFRAMEGAP_48BIT ((uint32_t)0x000C0000) /*!< minimum IFG between frames during transmission is 48Bit */
+#define ETH_INTERFRAMEGAP_40BIT ((uint32_t)0x000E0000) /*!< minimum IFG between frames during transmission is 40Bit */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Carrier_Sense ETH Carrier Sense
+ * @{
+ */
+#define ETH_CARRIERSENCE_ENABLE ((uint32_t)0x00000000)
+#define ETH_CARRIERSENCE_DISABLE ((uint32_t)0x00010000)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_Own ETH Receive Own
+ * @{
+ */
+#define ETH_RECEIVEOWN_ENABLE ((uint32_t)0x00000000)
+#define ETH_RECEIVEOWN_DISABLE ((uint32_t)0x00002000)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Loop_Back_Mode ETH Loop Back Mode
+ * @{
+ */
+#define ETH_LOOPBACKMODE_ENABLE ((uint32_t)0x00001000)
+#define ETH_LOOPBACKMODE_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Checksum_Offload ETH Checksum Offload
+ * @{
+ */
+#define ETH_CHECKSUMOFFLAOD_ENABLE ((uint32_t)0x00000400)
+#define ETH_CHECKSUMOFFLAOD_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Retry_Transmission ETH Retry Transmission
+ * @{
+ */
+#define ETH_RETRYTRANSMISSION_ENABLE ((uint32_t)0x00000000)
+#define ETH_RETRYTRANSMISSION_DISABLE ((uint32_t)0x00000200)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Automatic_Pad_CRC_Strip ETH Automatic Pad CRC Strip
+ * @{
+ */
+#define ETH_AUTOMATICPADCRCSTRIP_ENABLE ((uint32_t)0x00000080)
+#define ETH_AUTOMATICPADCRCSTRIP_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Back_Off_Limit ETH Back Off Limit
+ * @{
+ */
+#define ETH_BACKOFFLIMIT_10 ((uint32_t)0x00000000)
+#define ETH_BACKOFFLIMIT_8 ((uint32_t)0x00000020)
+#define ETH_BACKOFFLIMIT_4 ((uint32_t)0x00000040)
+#define ETH_BACKOFFLIMIT_1 ((uint32_t)0x00000060)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Deferral_Check ETH Deferral Check
+ * @{
+ */
+#define ETH_DEFFERRALCHECK_ENABLE ((uint32_t)0x00000010)
+#define ETH_DEFFERRALCHECK_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_All ETH Receive All
+ * @{
+ */
+#define ETH_RECEIVEALL_ENABLE ((uint32_t)0x80000000)
+#define ETH_RECEIVEAll_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Source_Addr_Filter ETH Source Addr Filter
+ * @{
+ */
+#define ETH_SOURCEADDRFILTER_NORMAL_ENABLE ((uint32_t)0x00000200)
+#define ETH_SOURCEADDRFILTER_INVERSE_ENABLE ((uint32_t)0x00000300)
+#define ETH_SOURCEADDRFILTER_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Pass_Control_Frames ETH Pass Control Frames
+ * @{
+ */
+#define ETH_PASSCONTROLFRAMES_BLOCKALL ((uint32_t)0x00000040) /*!< MAC filters all control frames from reaching the application */
+#define ETH_PASSCONTROLFRAMES_FORWARDALL ((uint32_t)0x00000080) /*!< MAC forwards all control frames to application even if they fail the Address Filter */
+#define ETH_PASSCONTROLFRAMES_FORWARDPASSEDADDRFILTER ((uint32_t)0x000000C0) /*!< MAC forwards control frames that pass the Address Filter. */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Broadcast_Frames_Reception ETH Broadcast Frames Reception
+ * @{
+ */
+#define ETH_BROADCASTFRAMESRECEPTION_ENABLE ((uint32_t)0x00000000)
+#define ETH_BROADCASTFRAMESRECEPTION_DISABLE ((uint32_t)0x00000020)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Destination_Addr_Filter ETH Destination Addr Filter
+ * @{
+ */
+#define ETH_DESTINATIONADDRFILTER_NORMAL ((uint32_t)0x00000000)
+#define ETH_DESTINATIONADDRFILTER_INVERSE ((uint32_t)0x00000008)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Promiscuous_Mode ETH Promiscuous Mode
+ * @{
+ */
+#define ETH_PROMISCUOUS_MODE_ENABLE ((uint32_t)0x00000001)
+#define ETH_PROMISCUOUS_MODE_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Multicast_Frames_Filter ETH Multicast Frames Filter
+ * @{
+ */
+#define ETH_MULTICASTFRAMESFILTER_PERFECTHASHTABLE ((uint32_t)0x00000404)
+#define ETH_MULTICASTFRAMESFILTER_HASHTABLE ((uint32_t)0x00000004)
+#define ETH_MULTICASTFRAMESFILTER_PERFECT ((uint32_t)0x00000000)
+#define ETH_MULTICASTFRAMESFILTER_NONE ((uint32_t)0x00000010)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Unicast_Frames_Filter ETH Unicast Frames Filter
+ * @{
+ */
+#define ETH_UNICASTFRAMESFILTER_PERFECTHASHTABLE ((uint32_t)0x00000402)
+#define ETH_UNICASTFRAMESFILTER_HASHTABLE ((uint32_t)0x00000002)
+#define ETH_UNICASTFRAMESFILTER_PERFECT ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Zero_Quanta_Pause ETH Zero Quanta Pause
+ * @{
+ */
+#define ETH_ZEROQUANTAPAUSE_ENABLE ((uint32_t)0x00000000)
+#define ETH_ZEROQUANTAPAUSE_DISABLE ((uint32_t)0x00000080)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Pause_Low_Threshold ETH Pause Low Threshold
+ * @{
+ */
+#define ETH_PAUSELOWTHRESHOLD_MINUS4 ((uint32_t)0x00000000) /*!< Pause time minus 4 slot times */
+#define ETH_PAUSELOWTHRESHOLD_MINUS28 ((uint32_t)0x00000010) /*!< Pause time minus 28 slot times */
+#define ETH_PAUSELOWTHRESHOLD_MINUS144 ((uint32_t)0x00000020) /*!< Pause time minus 144 slot times */
+#define ETH_PAUSELOWTHRESHOLD_MINUS256 ((uint32_t)0x00000030) /*!< Pause time minus 256 slot times */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Unicast_Pause_Frame_Detect ETH Unicast Pause Frame Detect
+ * @{
+ */
+#define ETH_UNICASTPAUSEFRAMEDETECT_ENABLE ((uint32_t)0x00000008)
+#define ETH_UNICASTPAUSEFRAMEDETECT_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_Flow_Control ETH Receive Flow Control
+ * @{
+ */
+#define ETH_RECEIVEFLOWCONTROL_ENABLE ((uint32_t)0x00000004)
+#define ETH_RECEIVEFLOWCONTROL_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Transmit_Flow_Control ETH Transmit Flow Control
+ * @{
+ */
+#define ETH_TRANSMITFLOWCONTROL_ENABLE ((uint32_t)0x00000002)
+#define ETH_TRANSMITFLOWCONTROL_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_VLAN_Tag_Comparison ETH VLAN Tag Comparison
+ * @{
+ */
+#define ETH_VLANTAGCOMPARISON_12BIT ((uint32_t)0x00010000)
+#define ETH_VLANTAGCOMPARISON_16BIT ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_addresses ETH MAC addresses
+ * @{
+ */
+#define ETH_MAC_ADDRESS0 ((uint32_t)0x00000000)
+#define ETH_MAC_ADDRESS1 ((uint32_t)0x00000008)
+#define ETH_MAC_ADDRESS2 ((uint32_t)0x00000010)
+#define ETH_MAC_ADDRESS3 ((uint32_t)0x00000018)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_addresses_filter_SA_DA ETH MAC addresses filter SA DA
+ * @{
+ */
+#define ETH_MAC_ADDRESSFILTER_SA ((uint32_t)0x00000000)
+#define ETH_MAC_ADDRESSFILTER_DA ((uint32_t)0x00000008)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_addresses_filter_Mask_bytes ETH MAC addresses filter Mask bytes
+ * @{
+ */
+#define ETH_MAC_ADDRESSMASK_BYTE6 ((uint32_t)0x20000000) /*!< Mask MAC Address high reg bits [15:8] */
+#define ETH_MAC_ADDRESSMASK_BYTE5 ((uint32_t)0x10000000) /*!< Mask MAC Address high reg bits [7:0] */
+#define ETH_MAC_ADDRESSMASK_BYTE4 ((uint32_t)0x08000000) /*!< Mask MAC Address low reg bits [31:24] */
+#define ETH_MAC_ADDRESSMASK_BYTE3 ((uint32_t)0x04000000) /*!< Mask MAC Address low reg bits [23:16] */
+#define ETH_MAC_ADDRESSMASK_BYTE2 ((uint32_t)0x02000000) /*!< Mask MAC Address low reg bits [15:8] */
+#define ETH_MAC_ADDRESSMASK_BYTE1 ((uint32_t)0x01000000) /*!< Mask MAC Address low reg bits [70] */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_Debug_flags ETH MAC Debug flags
+ * @{
+ */
+#define ETH_MAC_TXFIFO_FULL ((uint32_t)0x02000000) /* Tx FIFO full */
+#define ETH_MAC_TXFIFONOT_EMPTY ((uint32_t)0x01000000) /* Tx FIFO not empty */
+#define ETH_MAC_TXFIFO_WRITE_ACTIVE ((uint32_t)0x00400000) /* Tx FIFO write active */
+#define ETH_MAC_TXFIFO_IDLE ((uint32_t)0x00000000) /* Tx FIFO read status: Idle */
+#define ETH_MAC_TXFIFO_READ ((uint32_t)0x00100000) /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */
+#define ETH_MAC_TXFIFO_WAITING ((uint32_t)0x00200000) /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */
+#define ETH_MAC_TXFIFO_WRITING ((uint32_t)0x00300000) /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */
+#define ETH_MAC_TRANSMISSION_PAUSE ((uint32_t)0x00080000) /* MAC transmitter in pause */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE ((uint32_t)0x00000000) /* MAC transmit frame controller: Idle */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING ((uint32_t)0x00020000) /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF ((uint32_t)0x00040000) /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING ((uint32_t)0x00060000) /* MAC transmit frame controller: Transferring input frame for transmission */
+#define ETH_MAC_MII_TRANSMIT_ACTIVE ((uint32_t)0x00010000) /* MAC MII transmit engine active */
+#define ETH_MAC_RXFIFO_EMPTY ((uint32_t)0x00000000) /* Rx FIFO fill level: empty */
+#define ETH_MAC_RXFIFO_BELOW_THRESHOLD ((uint32_t)0x00000100) /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */
+#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD ((uint32_t)0x00000200) /* Rx FIFO fill level: fill-level above flow-control activate threshold */
+#define ETH_MAC_RXFIFO_FULL ((uint32_t)0x00000300) /* Rx FIFO fill level: full */
+#define ETH_MAC_READCONTROLLER_IDLE ((uint32_t)0x00000060) /* Rx FIFO read controller IDLE state */
+#define ETH_MAC_READCONTROLLER_READING_DATA ((uint32_t)0x00000060) /* Rx FIFO read controller Reading frame data */
+#define ETH_MAC_READCONTROLLER_READING_STATUS ((uint32_t)0x00000060) /* Rx FIFO read controller Reading frame status (or time-stamp) */
+#define ETH_MAC_READCONTROLLER_ FLUSHING ((uint32_t)0x00000060) /* Rx FIFO read controller Flushing the frame data and status */
+#define ETH_MAC_RXFIFO_WRITE_ACTIVE ((uint32_t)0x00000010) /* Rx FIFO write controller active */
+#define ETH_MAC_SMALL_FIFO_NOTACTIVE ((uint32_t)0x00000000) /* MAC small FIFO read / write controllers not active */
+#define ETH_MAC_SMALL_FIFO_READ_ACTIVE ((uint32_t)0x00000002) /* MAC small FIFO read controller active */
+#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE ((uint32_t)0x00000004) /* MAC small FIFO write controller active */
+#define ETH_MAC_SMALL_FIFO_RW_ACTIVE ((uint32_t)0x00000006) /* MAC small FIFO read / write controllers active */
+#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE ((uint32_t)0x00000001) /* MAC MII receive protocol engine active */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Drop_TCP_IP_Checksum_Error_Frame ETH Drop TCP IP Checksum Error Frame
+ * @{
+ */
+#define ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE ((uint32_t)0x00000000)
+#define ETH_DROPTCPIPCHECKSUMERRORFRAME_DISABLE ((uint32_t)0x04000000)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_Store_Forward ETH Receive Store Forward
+ * @{
+ */
+#define ETH_RECEIVESTOREFORWARD_ENABLE ((uint32_t)0x02000000)
+#define ETH_RECEIVESTOREFORWARD_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Flush_Received_Frame ETH Flush Received Frame
+ * @{
+ */
+#define ETH_FLUSHRECEIVEDFRAME_ENABLE ((uint32_t)0x00000000)
+#define ETH_FLUSHRECEIVEDFRAME_DISABLE ((uint32_t)0x01000000)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Transmit_Store_Forward ETH Transmit Store Forward
+ * @{
+ */
+#define ETH_TRANSMITSTOREFORWARD_ENABLE ((uint32_t)0x00200000)
+#define ETH_TRANSMITSTOREFORWARD_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Transmit_Threshold_Control ETH Transmit Threshold Control
+ * @{
+ */
+#define ETH_TRANSMITTHRESHOLDCONTROL_64BYTES ((uint32_t)0x00000000) /*!< threshold level of the MTL Transmit FIFO is 64 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_128BYTES ((uint32_t)0x00004000) /*!< threshold level of the MTL Transmit FIFO is 128 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_192BYTES ((uint32_t)0x00008000) /*!< threshold level of the MTL Transmit FIFO is 192 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_256BYTES ((uint32_t)0x0000C000) /*!< threshold level of the MTL Transmit FIFO is 256 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_40BYTES ((uint32_t)0x00010000) /*!< threshold level of the MTL Transmit FIFO is 40 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_32BYTES ((uint32_t)0x00014000) /*!< threshold level of the MTL Transmit FIFO is 32 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_24BYTES ((uint32_t)0x00018000) /*!< threshold level of the MTL Transmit FIFO is 24 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_16BYTES ((uint32_t)0x0001C000) /*!< threshold level of the MTL Transmit FIFO is 16 Bytes */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Forward_Error_Frames ETH Forward Error Frames
+ * @{
+ */
+#define ETH_FORWARDERRORFRAMES_ENABLE ((uint32_t)0x00000080)
+#define ETH_FORWARDERRORFRAMES_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Forward_Undersized_Good_Frames ETH Forward Undersized Good Frames
+ * @{
+ */
+#define ETH_FORWARDUNDERSIZEDGOODFRAMES_ENABLE ((uint32_t)0x00000040)
+#define ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_Threshold_Control ETH Receive Threshold Control
+ * @{
+ */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES ((uint32_t)0x00000000) /*!< threshold level of the MTL Receive FIFO is 64 Bytes */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_32BYTES ((uint32_t)0x00000008) /*!< threshold level of the MTL Receive FIFO is 32 Bytes */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_96BYTES ((uint32_t)0x00000010) /*!< threshold level of the MTL Receive FIFO is 96 Bytes */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_128BYTES ((uint32_t)0x00000018) /*!< threshold level of the MTL Receive FIFO is 128 Bytes */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Second_Frame_Operate ETH Second Frame Operate
+ * @{
+ */
+#define ETH_SECONDFRAMEOPERARTE_ENABLE ((uint32_t)0x00000004)
+#define ETH_SECONDFRAMEOPERARTE_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Address_Aligned_Beats ETH Address Aligned Beats
+ * @{
+ */
+#define ETH_ADDRESSALIGNEDBEATS_ENABLE ((uint32_t)0x02000000)
+#define ETH_ADDRESSALIGNEDBEATS_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Fixed_Burst ETH Fixed Burst
+ * @{
+ */
+#define ETH_FIXEDBURST_ENABLE ((uint32_t)0x00010000)
+#define ETH_FIXEDBURST_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Rx_DMA_Burst_Length ETH Rx DMA Burst Length
+ * @{
+ */
+#define ETH_RXDMABURSTLENGTH_1BEAT ((uint32_t)0x00020000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 1 */
+#define ETH_RXDMABURSTLENGTH_2BEAT ((uint32_t)0x00040000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 2 */
+#define ETH_RXDMABURSTLENGTH_4BEAT ((uint32_t)0x00080000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 4 */
+#define ETH_RXDMABURSTLENGTH_8BEAT ((uint32_t)0x00100000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 8 */
+#define ETH_RXDMABURSTLENGTH_16BEAT ((uint32_t)0x00200000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 16 */
+#define ETH_RXDMABURSTLENGTH_32BEAT ((uint32_t)0x00400000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 32 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_4BEAT ((uint32_t)0x01020000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 4 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_8BEAT ((uint32_t)0x01040000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 8 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_16BEAT ((uint32_t)0x01080000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 16 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_32BEAT ((uint32_t)0x01100000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 32 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_64BEAT ((uint32_t)0x01200000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 64 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_128BEAT ((uint32_t)0x01400000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 128 */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Tx_DMA_Burst_Length ETH Tx DMA Burst Length
+ * @{
+ */
+#define ETH_TXDMABURSTLENGTH_1BEAT ((uint32_t)0x00000100) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 1 */
+#define ETH_TXDMABURSTLENGTH_2BEAT ((uint32_t)0x00000200) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 2 */
+#define ETH_TXDMABURSTLENGTH_4BEAT ((uint32_t)0x00000400) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+#define ETH_TXDMABURSTLENGTH_8BEAT ((uint32_t)0x00000800) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+#define ETH_TXDMABURSTLENGTH_16BEAT ((uint32_t)0x00001000) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+#define ETH_TXDMABURSTLENGTH_32BEAT ((uint32_t)0x00002000) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_4BEAT ((uint32_t)0x01000100) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_8BEAT ((uint32_t)0x01000200) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_16BEAT ((uint32_t)0x01000400) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_32BEAT ((uint32_t)0x01000800) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_64BEAT ((uint32_t)0x01001000) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 64 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_128BEAT ((uint32_t)0x01002000) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 128 */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Enhanced_descriptor_format ETH DMA Enhanced descriptor format
+ * @{
+ */
+#define ETH_DMAENHANCEDDESCRIPTOR_ENABLE ((uint32_t)0x00000080)
+#define ETH_DMAENHANCEDDESCRIPTOR_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Arbitration ETH DMA Arbitration
+ * @{
+ */
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1 ((uint32_t)0x00000000)
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_2_1 ((uint32_t)0x00004000)
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_3_1 ((uint32_t)0x00008000)
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_4_1 ((uint32_t)0x0000C000)
+#define ETH_DMAARBITRATION_RXPRIORTX ((uint32_t)0x00000002)
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Tx_descriptor_segment ETH DMA Tx descriptor segment
+ * @{
+ */
+#define ETH_DMATXDESC_LASTSEGMENTS ((uint32_t)0x40000000) /*!< Last Segment */
+#define ETH_DMATXDESC_FIRSTSEGMENT ((uint32_t)0x20000000) /*!< First Segment */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Tx_descriptor_Checksum_Insertion_Control ETH DMA Tx descriptor Checksum Insertion Control
+ * @{
+ */
+#define ETH_DMATXDESC_CHECKSUMBYPASS ((uint32_t)0x00000000) /*!< Checksum engine bypass */
+#define ETH_DMATXDESC_CHECKSUMIPV4HEADER ((uint32_t)0x00400000) /*!< IPv4 header checksum insertion */
+#define ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT ((uint32_t)0x00800000) /*!< TCP/UDP/ICMP checksum insertion. Pseudo header checksum is assumed to be present */
+#define ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL ((uint32_t)0x00C00000) /*!< TCP/UDP/ICMP checksum fully in hardware including pseudo header */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Rx_descriptor_buffers ETH DMA Rx descriptor buffers
+ * @{
+ */
+#define ETH_DMARXDESC_BUFFER1 ((uint32_t)0x00000000) /*!< DMA Rx Desc Buffer1 */
+#define ETH_DMARXDESC_BUFFER2 ((uint32_t)0x00000001) /*!< DMA Rx Desc Buffer2 */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_PMT_Flags ETH PMT Flags
+ * @{
+ */
+#define ETH_PMT_FLAG_WUFFRPR ((uint32_t)0x80000000) /*!< Wake-Up Frame Filter Register Pointer Reset */
+#define ETH_PMT_FLAG_WUFR ((uint32_t)0x00000040) /*!< Wake-Up Frame Received */
+#define ETH_PMT_FLAG_MPR ((uint32_t)0x00000020) /*!< Magic Packet Received */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MMC_Tx_Interrupts ETH MMC Tx Interrupts
+ * @{
+ */
+#define ETH_MMC_IT_TGF ((uint32_t)0x00200000) /*!< When Tx good frame counter reaches half the maximum value */
+#define ETH_MMC_IT_TGFMSC ((uint32_t)0x00008000) /*!< When Tx good multi col counter reaches half the maximum value */
+#define ETH_MMC_IT_TGFSC ((uint32_t)0x00004000) /*!< When Tx good single col counter reaches half the maximum value */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MMC_Rx_Interrupts ETH MMC Rx Interrupts
+ * @{
+ */
+#define ETH_MMC_IT_RGUF ((uint32_t)0x10020000) /*!< When Rx good unicast frames counter reaches half the maximum value */
+#define ETH_MMC_IT_RFAE ((uint32_t)0x10000040) /*!< When Rx alignment error counter reaches half the maximum value */
+#define ETH_MMC_IT_RFCE ((uint32_t)0x10000020) /*!< When Rx crc error counter reaches half the maximum value */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_Flags ETH MAC Flags
+ * @{
+ */
+#define ETH_MAC_FLAG_TST ((uint32_t)0x00000200) /*!< Time stamp trigger flag (on MAC) */
+#define ETH_MAC_FLAG_MMCT ((uint32_t)0x00000040) /*!< MMC transmit flag */
+#define ETH_MAC_FLAG_MMCR ((uint32_t)0x00000020) /*!< MMC receive flag */
+#define ETH_MAC_FLAG_MMC ((uint32_t)0x00000010) /*!< MMC flag (on MAC) */
+#define ETH_MAC_FLAG_PMT ((uint32_t)0x00000008) /*!< PMT flag (on MAC) */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Flags ETH DMA Flags
+ * @{
+ */
+#define ETH_DMA_FLAG_TST ((uint32_t)0x20000000) /*!< Time-stamp trigger interrupt (on DMA) */
+#define ETH_DMA_FLAG_PMT ((uint32_t)0x10000000) /*!< PMT interrupt (on DMA) */
+#define ETH_DMA_FLAG_MMC ((uint32_t)0x08000000) /*!< MMC interrupt (on DMA) */
+#define ETH_DMA_FLAG_DATATRANSFERERROR ((uint32_t)0x00800000) /*!< Error bits 0-Rx DMA, 1-Tx DMA */
+#define ETH_DMA_FLAG_READWRITEERROR ((uint32_t)0x01000000) /*!< Error bits 0-write transfer, 1-read transfer */
+#define ETH_DMA_FLAG_ACCESSERROR ((uint32_t)0x02000000) /*!< Error bits 0-data buffer, 1-desc. access */
+#define ETH_DMA_FLAG_NIS ((uint32_t)0x00010000) /*!< Normal interrupt summary flag */
+#define ETH_DMA_FLAG_AIS ((uint32_t)0x00008000) /*!< Abnormal interrupt summary flag */
+#define ETH_DMA_FLAG_ER ((uint32_t)0x00004000) /*!< Early receive flag */
+#define ETH_DMA_FLAG_FBE ((uint32_t)0x00002000) /*!< Fatal bus error flag */
+#define ETH_DMA_FLAG_ET ((uint32_t)0x00000400) /*!< Early transmit flag */
+#define ETH_DMA_FLAG_RWT ((uint32_t)0x00000200) /*!< Receive watchdog timeout flag */
+#define ETH_DMA_FLAG_RPS ((uint32_t)0x00000100) /*!< Receive process stopped flag */
+#define ETH_DMA_FLAG_RBU ((uint32_t)0x00000080) /*!< Receive buffer unavailable flag */
+#define ETH_DMA_FLAG_R ((uint32_t)0x00000040) /*!< Receive flag */
+#define ETH_DMA_FLAG_TU ((uint32_t)0x00000020) /*!< Underflow flag */
+#define ETH_DMA_FLAG_RO ((uint32_t)0x00000010) /*!< Overflow flag */
+#define ETH_DMA_FLAG_TJT ((uint32_t)0x00000008) /*!< Transmit jabber timeout flag */
+#define ETH_DMA_FLAG_TBU ((uint32_t)0x00000004) /*!< Transmit buffer unavailable flag */
+#define ETH_DMA_FLAG_TPS ((uint32_t)0x00000002) /*!< Transmit process stopped flag */
+#define ETH_DMA_FLAG_T ((uint32_t)0x00000001) /*!< Transmit flag */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_Interrupts ETH MAC Interrupts
+ * @{
+ */
+#define ETH_MAC_IT_TST ((uint32_t)0x00000200) /*!< Time stamp trigger interrupt (on MAC) */
+#define ETH_MAC_IT_MMCT ((uint32_t)0x00000040) /*!< MMC transmit interrupt */
+#define ETH_MAC_IT_MMCR ((uint32_t)0x00000020) /*!< MMC receive interrupt */
+#define ETH_MAC_IT_MMC ((uint32_t)0x00000010) /*!< MMC interrupt (on MAC) */
+#define ETH_MAC_IT_PMT ((uint32_t)0x00000008) /*!< PMT interrupt (on MAC) */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Interrupts ETH DMA Interrupts
+ * @{
+ */
+#define ETH_DMA_IT_TST ((uint32_t)0x20000000) /*!< Time-stamp trigger interrupt (on DMA) */
+#define ETH_DMA_IT_PMT ((uint32_t)0x10000000) /*!< PMT interrupt (on DMA) */
+#define ETH_DMA_IT_MMC ((uint32_t)0x08000000) /*!< MMC interrupt (on DMA) */
+#define ETH_DMA_IT_NIS ((uint32_t)0x00010000) /*!< Normal interrupt summary */
+#define ETH_DMA_IT_AIS ((uint32_t)0x00008000) /*!< Abnormal interrupt summary */
+#define ETH_DMA_IT_ER ((uint32_t)0x00004000) /*!< Early receive interrupt */
+#define ETH_DMA_IT_FBE ((uint32_t)0x00002000) /*!< Fatal bus error interrupt */
+#define ETH_DMA_IT_ET ((uint32_t)0x00000400) /*!< Early transmit interrupt */
+#define ETH_DMA_IT_RWT ((uint32_t)0x00000200) /*!< Receive watchdog timeout interrupt */
+#define ETH_DMA_IT_RPS ((uint32_t)0x00000100) /*!< Receive process stopped interrupt */
+#define ETH_DMA_IT_RBU ((uint32_t)0x00000080) /*!< Receive buffer unavailable interrupt */
+#define ETH_DMA_IT_R ((uint32_t)0x00000040) /*!< Receive interrupt */
+#define ETH_DMA_IT_TU ((uint32_t)0x00000020) /*!< Underflow interrupt */
+#define ETH_DMA_IT_RO ((uint32_t)0x00000010) /*!< Overflow interrupt */
+#define ETH_DMA_IT_TJT ((uint32_t)0x00000008) /*!< Transmit jabber timeout interrupt */
+#define ETH_DMA_IT_TBU ((uint32_t)0x00000004) /*!< Transmit buffer unavailable interrupt */
+#define ETH_DMA_IT_TPS ((uint32_t)0x00000002) /*!< Transmit process stopped interrupt */
+#define ETH_DMA_IT_T ((uint32_t)0x00000001) /*!< Transmit interrupt */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_transmit_process_state ETH DMA transmit process state
+ * @{
+ */
+#define ETH_DMA_TRANSMITPROCESS_STOPPED ((uint32_t)0x00000000) /*!< Stopped - Reset or Stop Tx Command issued */
+#define ETH_DMA_TRANSMITPROCESS_FETCHING ((uint32_t)0x00100000) /*!< Running - fetching the Tx descriptor */
+#define ETH_DMA_TRANSMITPROCESS_WAITING ((uint32_t)0x00200000) /*!< Running - waiting for status */
+#define ETH_DMA_TRANSMITPROCESS_READING ((uint32_t)0x00300000) /*!< Running - reading the data from host memory */
+#define ETH_DMA_TRANSMITPROCESS_SUSPENDED ((uint32_t)0x00600000) /*!< Suspended - Tx Descriptor unavailable */
+#define ETH_DMA_TRANSMITPROCESS_CLOSING ((uint32_t)0x00700000) /*!< Running - closing Rx descriptor */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup ETH_DMA_receive_process_state ETH DMA receive process state
+ * @{
+ */
+#define ETH_DMA_RECEIVEPROCESS_STOPPED ((uint32_t)0x00000000) /*!< Stopped - Reset or Stop Rx Command issued */
+#define ETH_DMA_RECEIVEPROCESS_FETCHING ((uint32_t)0x00020000) /*!< Running - fetching the Rx descriptor */
+#define ETH_DMA_RECEIVEPROCESS_WAITING ((uint32_t)0x00060000) /*!< Running - waiting for packet */
+#define ETH_DMA_RECEIVEPROCESS_SUSPENDED ((uint32_t)0x00080000) /*!< Suspended - Rx Descriptor unavailable */
+#define ETH_DMA_RECEIVEPROCESS_CLOSING ((uint32_t)0x000A0000) /*!< Running - closing descriptor */
+#define ETH_DMA_RECEIVEPROCESS_QUEUING ((uint32_t)0x000E0000) /*!< Running - queuing the receive frame into host memory */
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_overflow ETH DMA overflow
+ * @{
+ */
+#define ETH_DMA_OVERFLOW_RXFIFOCOUNTER ((uint32_t)0x10000000) /*!< Overflow bit for FIFO overflow counter */
+#define ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER ((uint32_t)0x00010000) /*!< Overflow bit for missed frame counter */
+/**
+ * @}
+ */
+
+/** @defgroup ETH_EXTI_LINE_WAKEUP ETH EXTI LINE WAKEUP
+ * @{
+ */
+#define ETH_EXTI_LINE_WAKEUP ((uint32_t)0x00080000) /*!< External interrupt line 19 Connected to the ETH EXTI Line */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup ETH_Exported_Macros ETH Exported Macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+
+/** @brief Reset ETH handle state
+ * @param __HANDLE__: specifies the ETH handle.
+ * @retval None
+ */
+#define __HAL_ETH_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_ETH_STATE_RESET)
+
+/**
+ * @brief Checks whether the specified ETHERNET DMA Tx Desc flag is set or not.
+ * @param __HANDLE__: ETH Handle
+ * @param __FLAG__: specifies the flag of TDES0 to check.
+ * @retval the ETH_DMATxDescFlag (SET or RESET).
+ */
+#define __HAL_ETH_DMATXDESC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->TxDesc->Status & (__FLAG__) == (__FLAG__))
+
+/**
+ * @brief Checks whether the specified ETHERNET DMA Rx Desc flag is set or not.
+ * @param __HANDLE__: ETH Handle
+ * @param __FLAG__: specifies the flag of RDES0 to check.
+ * @retval the ETH_DMATxDescFlag (SET or RESET).
+ */
+#define __HAL_ETH_DMARXDESC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->RxDesc->Status & (__FLAG__) == (__FLAG__))
+
+/**
+ * @brief Enables the specified DMA Rx Desc receive interrupt.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMARXDESC_ENABLE_IT(__HANDLE__) ((__HANDLE__)->RxDesc->ControlBufferSize &=(~(uint32_t)ETH_DMARXDESC_DIC))
+
+/**
+ * @brief Disables the specified DMA Rx Desc receive interrupt.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMARXDESC_DISABLE_IT(__HANDLE__) ((__HANDLE__)->RxDesc->ControlBufferSize |= ETH_DMARXDESC_DIC)
+
+/**
+ * @brief Set the specified DMA Rx Desc Own bit.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMARXDESC_SET_OWN_BIT(__HANDLE__) ((__HANDLE__)->RxDesc->Status |= ETH_DMARXDESC_OWN)
+
+/**
+ * @brief Returns the specified ETHERNET DMA Tx Desc collision count.
+ * @param __HANDLE__: ETH Handle
+ * @retval The Transmit descriptor collision counter value.
+ */
+#define __HAL_ETH_DMATXDESC_GET_COLLISION_COUNT(__HANDLE__) (((__HANDLE__)->TxDesc->Status & ETH_DMATXDESC_CC) >> ETH_DMATXDESC_COLLISION_COUNTSHIFT)
+
+/**
+ * @brief Set the specified DMA Tx Desc Own bit.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_SET_OWN_BIT(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_OWN)
+
+/**
+ * @brief Enables the specified DMA Tx Desc Transmit interrupt.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_ENABLE_IT(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_IC)
+
+/**
+ * @brief Disables the specified DMA Tx Desc Transmit interrupt.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_DISABLE_IT(__HANDLE__) ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_IC)
+
+/**
+ * @brief Selects the specified ETHERNET DMA Tx Desc Checksum Insertion.
+ * @param __HANDLE__: ETH Handle
+ * @param __CHECKSUM__: specifies is the DMA Tx desc checksum insertion.
+ * This parameter can be one of the following values:
+ * @arg ETH_DMATXDESC_CHECKSUMBYPASS : Checksum bypass
+ * @arg ETH_DMATXDESC_CHECKSUMIPV4HEADER : IPv4 header checksum
+ * @arg ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT : TCP/UDP/ICMP checksum. Pseudo header checksum is assumed to be present
+ * @arg ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL : TCP/UDP/ICMP checksum fully in hardware including pseudo header
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_CHECKSUM_INSERTION(__HANDLE__, __CHECKSUM__) ((__HANDLE__)->TxDesc->Status |= (__CHECKSUM__))
+
+/**
+ * @brief Enables the DMA Tx Desc CRC.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_CRC_ENABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_DC)
+
+/**
+ * @brief Disables the DMA Tx Desc CRC.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_CRC_DISABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_DC)
+
+/**
+ * @brief Enables the DMA Tx Desc padding for frame shorter than 64 bytes.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_SHORT_FRAME_PADDING_ENABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_DP)
+
+/**
+ * @brief Disables the DMA Tx Desc padding for frame shorter than 64 bytes.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_SHORT_FRAME_PADDING_DISABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_DP)
+
+/**
+ * @brief Enables the specified ETHERNET MAC interrupts.
+ * @param __HANDLE__ : ETH Handle
+ * @param __INTERRUPT__: specifies the ETHERNET MAC interrupt sources to be
+ * enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg ETH_MAC_IT_TST : Time stamp trigger interrupt
+ * @arg ETH_MAC_IT_PMT : PMT interrupt
+ * @retval None
+ */
+#define __HAL_ETH_MAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MACIMR |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified ETHERNET MAC interrupts.
+ * @param __HANDLE__ : ETH Handle
+ * @param __INTERRUPT__: specifies the ETHERNET MAC interrupt sources to be
+ * enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg ETH_MAC_IT_TST : Time stamp trigger interrupt
+ * @arg ETH_MAC_IT_PMT : PMT interrupt
+ * @retval None
+ */
+#define __HAL_ETH_MAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MACIMR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Initiate a Pause Control Frame (Full-duplex only).
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_INITIATE_PAUSE_CONTROL_FRAME(__HANDLE__) ((__HANDLE__)->Instance->MACFCR |= ETH_MACFCR_FCBBPA)
+
+/**
+ * @brief Checks whether the ETHERNET flow control busy bit is set or not.
+ * @param __HANDLE__: ETH Handle
+ * @retval The new state of flow control busy status bit (SET or RESET).
+ */
+#define __HAL_ETH_GET_FLOW_CONTROL_BUSY_STATUS(__HANDLE__) (((__HANDLE__)->Instance->MACFCR & ETH_MACFCR_FCBBPA) == ETH_MACFCR_FCBBPA)
+
+/**
+ * @brief Enables the MAC Back Pressure operation activation (Half-duplex only).
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_BACK_PRESSURE_ACTIVATION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACFCR |= ETH_MACFCR_FCBBPA)
+
+/**
+ * @brief Disables the MAC BackPressure operation activation (Half-duplex only).
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_BACK_PRESSURE_ACTIVATION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACFCR &= ~ETH_MACFCR_FCBBPA)
+
+/**
+ * @brief Checks whether the specified ETHERNET MAC flag is set or not.
+ * @param __HANDLE__: ETH Handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg ETH_MAC_FLAG_TST : Time stamp trigger flag
+ * @arg ETH_MAC_FLAG_MMCT : MMC transmit flag
+ * @arg ETH_MAC_FLAG_MMCR : MMC receive flag
+ * @arg ETH_MAC_FLAG_MMC : MMC flag
+ * @arg ETH_MAC_FLAG_PMT : PMT flag
+ * @retval The state of ETHERNET MAC flag.
+ */
+#define __HAL_ETH_MAC_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->MACSR &( __FLAG__)) == ( __FLAG__))
+
+/**
+ * @brief Enables the specified ETHERNET DMA interrupts.
+ * @param __HANDLE__ : ETH Handle
+ * @param __INTERRUPT__: specifies the ETHERNET DMA interrupt sources to be
+ * enabled @ref ETH_DMA_Interrupts
+ * @retval None
+ */
+#define __HAL_ETH_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMAIER |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified ETHERNET DMA interrupts.
+ * @param __HANDLE__ : ETH Handle
+ * @param __INTERRUPT__: specifies the ETHERNET DMA interrupt sources to be
+ * disabled. @ref ETH_DMA_Interrupts
+ * @retval None
+ */
+#define __HAL_ETH_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMAIER &= ~(__INTERRUPT__))
+
+/**
+ * @brief Clears the ETHERNET DMA IT pending bit.
+ * @param __HANDLE__ : ETH Handle
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear. @ref ETH_DMA_Interrupts
+ * @retval None
+ */
+#define __HAL_ETH_DMA_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMASR =(__INTERRUPT__))
+
+/**
+ * @brief Checks whether the specified ETHERNET DMA flag is set or not.
+* @param __HANDLE__: ETH Handle
+ * @param __FLAG__: specifies the flag to check. @ref ETH_DMA_Flags
+ * @retval The new state of ETH_DMA_FLAG (SET or RESET).
+ */
+#define __HAL_ETH_DMA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->DMASR &( __FLAG__)) == ( __FLAG__))
+
+/**
+ * @brief Checks whether the specified ETHERNET DMA flag is set or not.
+ * @param __HANDLE__: ETH Handle
+ * @param __FLAG__: specifies the flag to clear. @ref ETH_DMA_Flags
+ * @retval The new state of ETH_DMA_FLAG (SET or RESET).
+ */
+#define __HAL_ETH_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->DMASR = (__FLAG__))
+
+/**
+ * @brief Checks whether the specified ETHERNET DMA overflow flag is set or not.
+ * @param __HANDLE__: ETH Handle
+ * @param __OVERFLOW__: specifies the DMA overflow flag to check.
+ * This parameter can be one of the following values:
+ * @arg ETH_DMA_OVERFLOW_RXFIFOCOUNTER : Overflow for FIFO Overflows Counter
+ * @arg ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER : Overflow for Buffer Unavailable Missed Frame Counter
+ * @retval The state of ETHERNET DMA overflow Flag (SET or RESET).
+ */
+#define __HAL_ETH_GET_DMA_OVERFLOW_STATUS(__HANDLE__, __OVERFLOW__) (((__HANDLE__)->Instance->DMAMFBOCR & (__OVERFLOW__)) == (__OVERFLOW__))
+
+/**
+ * @brief Set the DMA Receive status watchdog timer register value
+ * @param __HANDLE__: ETH Handle
+ * @param __VALUE__: DMA Receive status watchdog timer register value
+ * @retval None
+ */
+#define __HAL_ETH_SET_RECEIVE_WATCHDOG_TIMER(__HANDLE__, __VALUE__) ((__HANDLE__)->Instance->DMARSWTR = (__VALUE__))
+
+/**
+ * @brief Enables any unicast packet filtered by the MAC address
+ * recognition to be a wake-up frame.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_GLOBAL_UNICAST_WAKEUP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_GU)
+
+/**
+ * @brief Disables any unicast packet filtered by the MAC address
+ * recognition to be a wake-up frame.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_GLOBAL_UNICAST_WAKEUP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_GU)
+
+/**
+ * @brief Enables the MAC Wake-Up Frame Detection.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_FRAME_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_WFE)
+
+/**
+ * @brief Disables the MAC Wake-Up Frame Detection.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_FRAME_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_WFE)
+
+/**
+ * @brief Enables the MAC Magic Packet Detection.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MAGIC_PACKET_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_MPE)
+
+/**
+ * @brief Disables the MAC Magic Packet Detection.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MAGIC_PACKET_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_WFE)
+
+/**
+ * @brief Enables the MAC Power Down.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_POWER_DOWN_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_PD)
+
+/**
+ * @brief Disables the MAC Power Down.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_POWER_DOWN_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_PD)
+
+/**
+ * @brief Checks whether the specified ETHERNET PMT flag is set or not.
+ * @param __HANDLE__: ETH Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg ETH_PMT_FLAG_WUFFRPR : Wake-Up Frame Filter Register Pointer Reset
+ * @arg ETH_PMT_FLAG_WUFR : Wake-Up Frame Received
+ * @arg ETH_PMT_FLAG_MPR : Magic Packet Received
+ * @retval The new state of ETHERNET PMT Flag (SET or RESET).
+ */
+#define __HAL_ETH_GET_PMT_FLAG_STATUS(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->MACPMTCSR &( __FLAG__)) == ( __FLAG__))
+
+/**
+ * @brief Preset and Initialize the MMC counters to almost-full value: 0xFFFF_FFF0 (full - 16)
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTER_FULL_PRESET(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= (ETH_MMCCR_MCFHP | ETH_MMCCR_MCP))
+
+/**
+ * @brief Preset and Initialize the MMC counters to almost-half value: 0x7FFF_FFF0 (half - 16)
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTER_HALF_PRESET(__HANDLE__) do{(__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_MCFHP;\
+ (__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_MCP;} while (0)
+
+/**
+ * @brief Enables the MMC Counter Freeze.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTER_FREEZE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_MCF)
+
+/**
+ * @brief Disables the MMC Counter Freeze.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTER_FREEZE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_MCF)
+
+/**
+ * @brief Enables the MMC Reset On Read.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_ETH_MMC_RESET_ONREAD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_ROR)
+
+/**
+ * @brief Disables the MMC Reset On Read.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_ETH_MMC_RESET_ONREAD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_ROR)
+
+/**
+ * @brief Enables the MMC Counter Stop Rollover.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_ETH_MMC_COUNTER_ROLLOVER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_CSR)
+
+/**
+ * @brief Disables the MMC Counter Stop Rollover.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_ETH_MMC_COUNTER_ROLLOVER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_CSR)
+
+/**
+ * @brief Resets the MMC Counters.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTERS_RESET(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_CR)
+
+/**
+ * @brief Enables the specified ETHERNET MMC Rx interrupts.
+ * @param __HANDLE__: ETH Handle.
+ * @param __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg ETH_MMC_IT_RGUF : When Rx good unicast frames counter reaches half the maximum value
+ * @arg ETH_MMC_IT_RFAE : When Rx alignment error counter reaches half the maximum value
+ * @arg ETH_MMC_IT_RFCE : When Rx crc error counter reaches half the maximum value
+ * @retval None
+ */
+#define __HAL_ETH_MMC_RX_IT_ENABLE(__HANDLE__, __INTERRUPT__) (__HANDLE__)->Instance->MMCRIMR &= ~((__INTERRUPT__) & 0xEFFFFFFF)
+/**
+ * @brief Disables the specified ETHERNET MMC Rx interrupts.
+ * @param __HANDLE__: ETH Handle.
+ * @param __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg ETH_MMC_IT_RGUF : When Rx good unicast frames counter reaches half the maximum value
+ * @arg ETH_MMC_IT_RFAE : When Rx alignment error counter reaches half the maximum value
+ * @arg ETH_MMC_IT_RFCE : When Rx crc error counter reaches half the maximum value
+ * @retval None
+ */
+#define __HAL_ETH_MMC_RX_IT_DISABLE(__HANDLE__, __INTERRUPT__) (__HANDLE__)->Instance->MMCRIMR |= ((__INTERRUPT__) & 0xEFFFFFFF)
+/**
+ * @brief Enables the specified ETHERNET MMC Tx interrupts.
+ * @param __HANDLE__: ETH Handle.
+ * @param __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg ETH_MMC_IT_TGF : When Tx good frame counter reaches half the maximum value
+ * @arg ETH_MMC_IT_TGFMSC: When Tx good multi col counter reaches half the maximum value
+ * @arg ETH_MMC_IT_TGFSC : When Tx good single col counter reaches half the maximum value
+ * @retval None
+ */
+#define __HAL_ETH_MMC_TX_IT_ENABLE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MMCRIMR &= ~ (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified ETHERNET MMC Tx interrupts.
+ * @param __HANDLE__: ETH Handle.
+ * @param __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg ETH_MMC_IT_TGF : When Tx good frame counter reaches half the maximum value
+ * @arg ETH_MMC_IT_TGFMSC: When Tx good multi col counter reaches half the maximum value
+ * @arg ETH_MMC_IT_TGFSC : When Tx good single col counter reaches half the maximum value
+ * @retval None
+ */
+#define __HAL_ETH_MMC_TX_IT_DISABLE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MMCRIMR |= (__INTERRUPT__))
+
+/**
+ * @brief Enables the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= (ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Disables the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Enable event on ETH External event line.
+ * @retval None.
+ */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_EVENT() EXTI->EMR |= (ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Disable event on ETH External event line
+ * @retval None.
+ */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_EVENT() EXTI->EMR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Get flag of the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Clear flag of the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = (ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Enables rising edge trigger to the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER() EXTI->RTSR |= ETH_EXTI_LINE_WAKEUP
+
+/**
+ * @brief Disables the rising edge trigger to the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_RISING_EDGE_TRIGGER() EXTI->RTSR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Enables falling edge trigger to the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER() EXTI->FTSR |= (ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Disables falling edge trigger to the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_FALLING_EDGE_TRIGGER() EXTI->FTSR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Enables rising/falling edge trigger to the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER() EXTI->RTSR |= ETH_EXTI_LINE_WAKEUP;\
+ EXTI->FTSR |= ETH_EXTI_LINE_WAKEUP
+
+/**
+ * @brief Disables rising/falling edge trigger to the ETH External interrupt line.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_EXTI_DISABLE_FALLINGRISING_TRIGGER() EXTI->RTSR &= ~(ETH_EXTI_LINE_WAKEUP);\
+ EXTI->FTSR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Generate a Software interrupt on selected EXTI line.
+ * @retval None.
+ */
+#define __HAL_ETH_WAKEUP_EXTI_GENERATE_SWIT() EXTI->SWIER|= ETH_EXTI_LINE_WAKEUP
+
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup ETH_Exported_Functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+
+/** @addtogroup ETH_Exported_Functions_Group1
+ * @{
+ */
+HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth);
+void HAL_ETH_MspInit(ETH_HandleTypeDef *heth);
+void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_DMATxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMATxDescTab, uint8_t* TxBuff, uint32_t TxBuffCount);
+HAL_StatusTypeDef HAL_ETH_DMARxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMARxDescTab, uint8_t *RxBuff, uint32_t RxBuffCount);
+
+/**
+ * @}
+ */
+/* IO operation functions ****************************************************/
+
+/** @addtogroup ETH_Exported_Functions_Group2
+ * @{
+ */
+HAL_StatusTypeDef HAL_ETH_TransmitFrame(ETH_HandleTypeDef *heth, uint32_t FrameLength);
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame(ETH_HandleTypeDef *heth);
+/* Communication with PHY functions*/
+HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t *RegValue);
+HAL_StatusTypeDef HAL_ETH_WritePHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t RegValue);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame_IT(ETH_HandleTypeDef *heth);
+void HAL_ETH_IRQHandler(ETH_HandleTypeDef *heth);
+/* Callback in non blocking modes (Interrupt) */
+void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth);
+void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth);
+void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth);
+/**
+ * @}
+ */
+
+/* Peripheral Control functions **********************************************/
+
+/** @addtogroup ETH_Exported_Functions_Group3
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_ETH_Start(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_Stop(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_ConfigMAC(ETH_HandleTypeDef *heth, ETH_MACInitTypeDef *macconf);
+HAL_StatusTypeDef HAL_ETH_ConfigDMA(ETH_HandleTypeDef *heth, ETH_DMAInitTypeDef *dmaconf);
+/**
+ * @}
+ */
+
+/* Peripheral State functions ************************************************/
+
+/** @addtogroup ETH_Exported_Functions_Group4
+ * @{
+ */
+HAL_ETH_StateTypeDef HAL_ETH_GetState(ETH_HandleTypeDef *heth);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_ETH_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_flash.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,435 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_flash.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of FLASH HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_FLASH_H
+#define __STM32F4xx_HAL_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASH
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Types FLASH Exported Types
+ * @{
+ */
+
+/**
+ * @brief FLASH Procedure structure definition
+ */
+typedef enum
+{
+ FLASH_PROC_NONE = 0,
+ FLASH_PROC_SECTERASE,
+ FLASH_PROC_MASSERASE,
+ FLASH_PROC_PROGRAM
+} FLASH_ProcedureTypeDef;
+
+/**
+ * @brief FLASH handle Structure definition
+ */
+typedef struct
+{
+ __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*Internal variable to indicate which procedure is ongoing or not in IT context*/
+
+ __IO uint32_t NbSectorsToErase; /*Internal variable to save the remaining sectors to erase in IT context*/
+
+ __IO uint8_t VoltageForErase; /*Internal variable to provide voltage range selected by user in IT context*/
+
+ __IO uint32_t Sector; /*Internal variable to define the current sector which is erasing*/
+
+ __IO uint32_t Bank; /*Internal variable to save current bank selected during mass erase*/
+
+ __IO uint32_t Address; /*Internal variable to save address selected for program*/
+
+ HAL_LockTypeDef Lock; /* FLASH locking object */
+
+ __IO uint32_t ErrorCode; /* FLASH error code */
+
+}FLASH_ProcessTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
+ * @{
+ */
+/** @defgroup FLASH_Error_Code FLASH Error Code
+ * @brief FLASH Error Code
+ * @{
+ */
+#define HAL_FLASH_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_FLASH_ERROR_RD ((uint32_t)0x00000001) /*!< Read Protection error */
+#define HAL_FLASH_ERROR_PGS ((uint32_t)0x00000002) /*!< Programming Sequence error */
+#define HAL_FLASH_ERROR_PGP ((uint32_t)0x00000004) /*!< Programming Parallelism error */
+#define HAL_FLASH_ERROR_PGA ((uint32_t)0x00000008) /*!< Programming Alignment error */
+#define HAL_FLASH_ERROR_WRP ((uint32_t)0x00000010) /*!< Write protection error */
+#define HAL_FLASH_ERROR_OPERATION ((uint32_t)0x00000020) /*!< Operation Error */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Type_Program FLASH Type Program
+ * @{
+ */
+#define FLASH_TYPEPROGRAM_BYTE ((uint32_t)0x00) /*!< Program byte (8-bit) at a specified address */
+#define FLASH_TYPEPROGRAM_HALFWORD ((uint32_t)0x01) /*!< Program a half-word (16-bit) at a specified address */
+#define FLASH_TYPEPROGRAM_WORD ((uint32_t)0x02) /*!< Program a word (32-bit) at a specified address */
+#define FLASH_TYPEPROGRAM_DOUBLEWORD ((uint32_t)0x03) /*!< Program a double word (64-bit) at a specified address */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Flag_definition FLASH Flag definition
+ * @brief Flag definition
+ * @{
+ */
+#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */
+#define FLASH_FLAG_OPERR FLASH_SR_SOP /*!< FLASH operation Error flag */
+#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */
+#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */
+#define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */
+#define FLASH_FLAG_PGSERR FLASH_SR_PGSERR /*!< FLASH Programming Sequence error flag */
+#define FLASH_FLAG_RDERR ((uint32_t)0x00000100) /*!< Read Protection error flag (PCROP) */
+#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
+ * @brief FLASH Interrupt definition
+ * @{
+ */
+#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
+#define FLASH_IT_ERR ((uint32_t)0x02000000) /*!< Error Interrupt source */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism
+ * @{
+ */
+#define FLASH_PSIZE_BYTE ((uint32_t)0x00000000)
+#define FLASH_PSIZE_HALF_WORD ((uint32_t)0x00000100)
+#define FLASH_PSIZE_WORD ((uint32_t)0x00000200)
+#define FLASH_PSIZE_DOUBLE_WORD ((uint32_t)0x00000300)
+#define CR_PSIZE_MASK ((uint32_t)0xFFFFFCFF)
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Keys FLASH Keys
+ * @{
+ */
+#define RDP_KEY ((uint16_t)0x00A5)
+#define FLASH_KEY1 ((uint32_t)0x45670123)
+#define FLASH_KEY2 ((uint32_t)0xCDEF89AB)
+#define FLASH_OPT_KEY1 ((uint32_t)0x08192A3B)
+#define FLASH_OPT_KEY2 ((uint32_t)0x4C5D6E7F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
+ * @{
+ */
+/**
+ * @brief Set the FLASH Latency.
+ * @param __LATENCY__: FLASH Latency
+ * The value of this parameter depend on device used within the same series
+ * @retval none
+ */
+#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (*(__IO uint8_t *)ACR_BYTE0_ADDRESS = (uint8_t)(__LATENCY__))
+
+/**
+ * @brief Enable the FLASH prefetch buffer.
+ * @retval none
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN)
+
+/**
+ * @brief Disable the FLASH prefetch buffer.
+ * @retval none
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN))
+
+/**
+ * @brief Enable the FLASH instruction cache.
+ * @retval none
+ */
+#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_ICEN)
+
+/**
+ * @brief Disable the FLASH instruction cache.
+ * @retval none
+ */
+#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_ICEN))
+
+/**
+ * @brief Enable the FLASH data cache.
+ * @retval none
+ */
+#define __HAL_FLASH_DATA_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_DCEN)
+
+/**
+ * @brief Disable the FLASH data cache.
+ * @retval none
+ */
+#define __HAL_FLASH_DATA_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_DCEN))
+
+/**
+ * @brief Resets the FLASH instruction Cache.
+ * @note This function must be used only when the Instruction Cache is disabled.
+ * @retval None
+ */
+#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_ICRST; \
+ FLASH->ACR &= ~FLASH_ACR_ICRST; \
+ }while(0)
+
+/**
+ * @brief Resets the FLASH data Cache.
+ * @note This function must be used only when the data Cache is disabled.
+ * @retval None
+ */
+#define __HAL_FLASH_DATA_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_DCRST; \
+ FLASH->ACR &= ~FLASH_ACR_DCRST; \
+ }while(0)
+/**
+ * @brief Enable the specified FLASH interrupt.
+ * @param __INTERRUPT__ : FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+ * @arg FLASH_IT_ERR: Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified FLASH interrupt.
+ * @param __INTERRUPT__ : FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+ * @arg FLASH_IT_ERR: Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
+
+/**
+ * @brief Get the specified FLASH flag status.
+ * @param __FLAG__: specifies the FLASH flag to check.
+ * This parameter can be one of the following values:
+ * @arg FLASH_FLAG_EOP : FLASH End of Operation flag
+ * @arg FLASH_FLAG_OPERR : FLASH operation Error flag
+ * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
+ * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
+ * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
+ * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP)
+ * @arg FLASH_FLAG_BSY : FLASH Busy flag
+ * @retval The new state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__)))
+
+/**
+ * @brief Clear the specified FLASH flag.
+ * @param __FLAG__: specifies the FLASH flags to clear.
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_FLAG_EOP : FLASH End of Operation flag
+ * @arg FLASH_FLAG_OPERR : FLASH operation Error flag
+ * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
+ * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
+ * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
+ * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP)
+ * @retval none
+ */
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__))
+/**
+ * @}
+ */
+
+/* Include FLASH HAL Extension module */
+#include "stm32f4xx_hal_flash_ex.h"
+#include "stm32f4xx_hal_flash_ramfunc.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASH_Exported_Functions
+ * @{
+ */
+/** @addtogroup FLASH_Exported_Functions_Group1
+ * @{
+ */
+/* Program operation functions ***********************************************/
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+/* FLASH IRQ handler method */
+void HAL_FLASH_IRQHandler(void);
+/* Callbacks in non blocking modes */
+void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
+void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH_Exported_Functions_Group2
+ * @{
+ */
+/* Peripheral Control functions **********************************************/
+HAL_StatusTypeDef HAL_FLASH_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
+/* Option bytes control */
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions ************************************************/
+uint32_t HAL_FLASH_GetError(void);
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Variables FLASH Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Constants FLASH Private Constants
+ * @{
+ */
+
+/**
+ * @brief ACR register byte 0 (Bits[7:0]) base address
+ */
+#define ACR_BYTE0_ADDRESS ((uint32_t)0x40023C00)
+/**
+ * @brief OPTCR register byte 0 (Bits[7:0]) base address
+ */
+#define OPTCR_BYTE0_ADDRESS ((uint32_t)0x40023C14)
+/**
+ * @brief OPTCR register byte 1 (Bits[15:8]) base address
+ */
+#define OPTCR_BYTE1_ADDRESS ((uint32_t)0x40023C15)
+/**
+ * @brief OPTCR register byte 2 (Bits[23:16]) base address
+ */
+#define OPTCR_BYTE2_ADDRESS ((uint32_t)0x40023C16)
+/**
+ * @brief OPTCR register byte 3 (Bits[31:24]) base address
+ */
+#define OPTCR_BYTE3_ADDRESS ((uint32_t)0x40023C17)
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup FLASH_Private_Macros FLASH Private Macros
+ * @{
+ */
+
+/** @defgroup FLASH_IS_FLASH_Definitions FLASH Private macros to check input parameters
+ * @{
+ */
+#define IS_FLASH_TYPEPROGRAM(VALUE)(((VALUE) == FLASH_TYPEPROGRAM_BYTE) || \
+ ((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \
+ ((VALUE) == FLASH_TYPEPROGRAM_WORD) || \
+ ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup FLASH_Private_Functions FLASH Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_FLASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_flash_ex.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,866 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_flash_ex.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of FLASH HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_FLASH_EX_H
+#define __STM32F4xx_HAL_FLASH_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASHEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup FLASHEx_Exported_Types FLASH Exported Types
+ * @{
+ */
+
+/**
+ * @brief FLASH Erase structure definition
+ */
+typedef struct
+{
+ uint32_t TypeErase; /*!< Mass erase or sector Erase.
+ This parameter can be a value of @ref FLASHEx_Type_Erase */
+
+ uint32_t Banks; /*!< Select banks to erase when Mass erase is enabled.
+ This parameter must be a value of @ref FLASHEx_Banks */
+
+ uint32_t Sector; /*!< Initial FLASH sector to erase when Mass erase is disabled
+ This parameter must be a value of @ref FLASHEx_Sectors */
+
+ uint32_t NbSectors; /*!< Number of sectors to be erased.
+ This parameter must be a value between 1 and (max number of sectors - value of Initial sector)*/
+
+ uint32_t VoltageRange;/*!< The device voltage range which defines the erase parallelism
+ This parameter must be a value of @ref FLASHEx_Voltage_Range */
+
+} FLASH_EraseInitTypeDef;
+
+/**
+ * @brief FLASH Option Bytes Program structure definition
+ */
+typedef struct
+{
+ uint32_t OptionType; /*!< Option byte to be configured.
+ This parameter can be a value of @ref FLASHEx_Option_Type */
+
+ uint32_t WRPState; /*!< Write protection activation or deactivation.
+ This parameter can be a value of @ref FLASHEx_WRP_State */
+
+ uint32_t WRPSector; /*!< Specifies the sector(s) to be write protected.
+ The value of this parameter depend on device used within the same series */
+
+ uint32_t Banks; /*!< Select banks for WRP activation/deactivation of all sectors.
+ This parameter must be a value of @ref FLASHEx_Banks */
+
+ uint32_t RDPLevel; /*!< Set the read protection level.
+ This parameter can be a value of @ref FLASHEx_Option_Bytes_Read_Protection */
+
+ uint32_t BORLevel; /*!< Set the BOR Level.
+ This parameter can be a value of @ref FLASHEx_BOR_Reset_Level */
+
+ uint8_t USERConfig; /*!< Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. */
+
+} FLASH_OBProgramInitTypeDef;
+
+/**
+ * @brief FLASH Advanced Option Bytes Program structure definition
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+typedef struct
+{
+ uint32_t OptionType; /*!< Option byte to be configured for extension.
+ This parameter can be a value of @ref FLASHEx_Advanced_Option_Type */
+
+ uint32_t PCROPState; /*!< PCROP activation or deactivation.
+ This parameter can be a value of @ref FLASHEx_PCROP_State */
+
+#if defined (STM32F401xC) || defined (STM32F401xE) || defined (STM32F411xE) || defined (STM32F446xx)
+ uint16_t Sectors; /*!< specifies the sector(s) set for PCROP.
+ This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+ uint32_t Banks; /*!< Select banks for PCROP activation/deactivation of all sectors.
+ This parameter must be a value of @ref FLASHEx_Banks */
+
+ uint16_t SectorsBank1; /*!< Specifies the sector(s) set for PCROP for Bank1.
+ This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */
+
+ uint16_t SectorsBank2; /*!< Specifies the sector(s) set for PCROP for Bank2.
+ This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */
+
+ uint8_t BootConfig; /*!< Specifies Option bytes for boot config.
+ This parameter can be a value of @ref FLASHEx_Dual_Boot */
+
+#endif /*STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+} FLASH_AdvOBProgramInitTypeDef;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup FLASHEx_Exported_Constants FLASH Exported Constants
+ * @{
+ */
+
+/** @defgroup FLASHEx_Type_Erase FLASH Type Erase
+ * @{
+ */
+#define FLASH_TYPEERASE_SECTORS ((uint32_t)0x00) /*!< Sectors erase only */
+#define FLASH_TYPEERASE_MASSERASE ((uint32_t)0x01) /*!< Flash Mass erase activation */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Voltage_Range FLASH Voltage Range
+ * @{
+ */
+#define FLASH_VOLTAGE_RANGE_1 ((uint32_t)0x00) /*!< Device operating range: 1.8V to 2.1V */
+#define FLASH_VOLTAGE_RANGE_2 ((uint32_t)0x01) /*!< Device operating range: 2.1V to 2.7V */
+#define FLASH_VOLTAGE_RANGE_3 ((uint32_t)0x02) /*!< Device operating range: 2.7V to 3.6V */
+#define FLASH_VOLTAGE_RANGE_4 ((uint32_t)0x03) /*!< Device operating range: 2.7V to 3.6V + External Vpp */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_WRP_State FLASH WRP State
+ * @{
+ */
+#define OB_WRPSTATE_DISABLE ((uint32_t)0x00) /*!< Disable the write protection of the desired bank 1 sectors */
+#define OB_WRPSTATE_ENABLE ((uint32_t)0x01) /*!< Enable the write protection of the desired bank 1 sectors */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Type FLASH Option Type
+ * @{
+ */
+#define OPTIONBYTE_WRP ((uint32_t)0x01) /*!< WRP option byte configuration */
+#define OPTIONBYTE_RDP ((uint32_t)0x02) /*!< RDP option byte configuration */
+#define OPTIONBYTE_USER ((uint32_t)0x04) /*!< USER option byte configuration */
+#define OPTIONBYTE_BOR ((uint32_t)0x08) /*!< BOR option byte configuration */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_Read_Protection FLASH Option Bytes Read Protection
+ * @{
+ */
+#define OB_RDP_LEVEL_0 ((uint8_t)0xAA)
+#define OB_RDP_LEVEL_1 ((uint8_t)0x55)
+/*#define OB_RDP_LEVEL_2 ((uint8_t)0xCC)*/ /*!< Warning: When enabling read protection level 2
+ it s no more possible to go back to level 1 or 0 */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_IWatchdog FLASH Option Bytes IWatchdog
+ * @{
+ */
+#define OB_IWDG_SW ((uint8_t)0x20) /*!< Software IWDG selected */
+#define OB_IWDG_HW ((uint8_t)0x00) /*!< Hardware IWDG selected */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_nRST_STOP FLASH Option Bytes nRST_STOP
+ * @{
+ */
+#define OB_STOP_NO_RST ((uint8_t)0x40) /*!< No reset generated when entering in STOP */
+#define OB_STOP_RST ((uint8_t)0x00) /*!< Reset generated when entering in STOP */
+/**
+ * @}
+ */
+
+
+/** @defgroup FLASHEx_Option_Bytes_nRST_STDBY FLASH Option Bytes nRST_STDBY
+ * @{
+ */
+#define OB_STDBY_NO_RST ((uint8_t)0x80) /*!< No reset generated when entering in STANDBY */
+#define OB_STDBY_RST ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_BOR_Reset_Level FLASH BOR Reset Level
+ * @{
+ */
+#define OB_BOR_LEVEL3 ((uint8_t)0x00) /*!< Supply voltage ranges from 2.70 to 3.60 V */
+#define OB_BOR_LEVEL2 ((uint8_t)0x04) /*!< Supply voltage ranges from 2.40 to 2.70 V */
+#define OB_BOR_LEVEL1 ((uint8_t)0x08) /*!< Supply voltage ranges from 2.10 to 2.40 V */
+#define OB_BOR_OFF ((uint8_t)0x0C) /*!< Supply voltage ranges from 1.62 to 2.10 V */
+/**
+ * @}
+ */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+/** @defgroup FLASHEx_PCROP_State FLASH PCROP State
+ * @{
+ */
+#define OB_PCROP_STATE_DISABLE ((uint32_t)0x00) /*!< Disable PCROP */
+#define OB_PCROP_STATE_ENABLE ((uint32_t)0x01) /*!< Enable PCROP */
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE */
+
+/** @defgroup FLASHEx_Advanced_Option_Type FLASH Advanced Option Type
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+#define OPTIONBYTE_PCROP ((uint32_t)0x01) /*!< PCROP option byte configuration */
+#define OPTIONBYTE_BOOTCONFIG ((uint32_t)0x02) /*!< BOOTConfig option byte configuration */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define OPTIONBYTE_PCROP ((uint32_t)0x01) /*!<PCROP option byte configuration */
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Latency FLASH Latency
+ * @{
+ */
+/*------------------------------------------- STM32F42xxx/STM32F43xxx------------------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero Latency cycle */
+#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One Latency cycle */
+#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two Latency cycles */
+#define FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three Latency cycles */
+#define FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four Latency cycles */
+#define FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH Five Latency cycles */
+#define FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH Six Latency cycles */
+#define FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH Seven Latency cycles */
+#define FLASH_LATENCY_8 FLASH_ACR_LATENCY_8WS /*!< FLASH Eight Latency cycles */
+#define FLASH_LATENCY_9 FLASH_ACR_LATENCY_9WS /*!< FLASH Nine Latency cycles */
+#define FLASH_LATENCY_10 FLASH_ACR_LATENCY_10WS /*!< FLASH Ten Latency cycles */
+#define FLASH_LATENCY_11 FLASH_ACR_LATENCY_11WS /*!< FLASH Eleven Latency cycles */
+#define FLASH_LATENCY_12 FLASH_ACR_LATENCY_12WS /*!< FLASH Twelve Latency cycles */
+#define FLASH_LATENCY_13 FLASH_ACR_LATENCY_13WS /*!< FLASH Thirteen Latency cycles */
+#define FLASH_LATENCY_14 FLASH_ACR_LATENCY_14WS /*!< FLASH Fourteen Latency cycles */
+#define FLASH_LATENCY_15 FLASH_ACR_LATENCY_15WS /*!< FLASH Fifteen Latency cycles */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+/*--------------------------------------------------------------------------------------------------------------*/
+
+/*-------------------------- STM32F40xxx/STM32F41xxx/STM32F401xx/STM32F411xx -----------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+
+#define FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero Latency cycle */
+#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One Latency cycle */
+#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two Latency cycles */
+#define FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three Latency cycles */
+#define FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four Latency cycles */
+#define FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH Five Latency cycles */
+#define FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH Six Latency cycles */
+#define FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH Seven Latency cycles */
+#endif /* STM32F40xxx || STM32F41xxx || STM32F401xx || STM32F411xE || STM32F446xx */
+/*--------------------------------------------------------------------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+
+/** @defgroup FLASHEx_Banks FLASH Banks
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define FLASH_BANK_1 ((uint32_t)1) /*!< Bank 1 */
+#define FLASH_BANK_2 ((uint32_t)2) /*!< Bank 2 */
+#define FLASH_BANK_BOTH ((uint32_t)FLASH_BANK_1 | FLASH_BANK_2) /*!< Bank1 and Bank2 */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define FLASH_BANK_1 ((uint32_t)1) /*!< Bank 1 */
+#endif /* STM32F40xxx || STM32F41xxx || STM32F401xx || STM32F411xE || STM32F446xx */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_MassErase_bit FLASH Mass Erase bit
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define FLASH_MER_BIT (FLASH_CR_MER1 | FLASH_CR_MER2) /*!< 2 MER bits here to clear */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define FLASH_MER_BIT (FLASH_CR_MER) /*!< only 1 MER Bit */
+#endif /* STM32F40xxx || STM32F41xxx || STM32F401xx || STM32F411xE || STM32F446xx */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Sectors FLASH Sectors
+ * @{
+ */
+/*------------------------------------------ STM32F42xxx/STM32F43xxx--------------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define FLASH_SECTOR_0 ((uint32_t)0) /*!< Sector Number 0 */
+#define FLASH_SECTOR_1 ((uint32_t)1) /*!< Sector Number 1 */
+#define FLASH_SECTOR_2 ((uint32_t)2) /*!< Sector Number 2 */
+#define FLASH_SECTOR_3 ((uint32_t)3) /*!< Sector Number 3 */
+#define FLASH_SECTOR_4 ((uint32_t)4) /*!< Sector Number 4 */
+#define FLASH_SECTOR_5 ((uint32_t)5) /*!< Sector Number 5 */
+#define FLASH_SECTOR_6 ((uint32_t)6) /*!< Sector Number 6 */
+#define FLASH_SECTOR_7 ((uint32_t)7) /*!< Sector Number 7 */
+#define FLASH_SECTOR_8 ((uint32_t)8) /*!< Sector Number 8 */
+#define FLASH_SECTOR_9 ((uint32_t)9) /*!< Sector Number 9 */
+#define FLASH_SECTOR_10 ((uint32_t)10) /*!< Sector Number 10 */
+#define FLASH_SECTOR_11 ((uint32_t)11) /*!< Sector Number 11 */
+#define FLASH_SECTOR_12 ((uint32_t)12) /*!< Sector Number 12 */
+#define FLASH_SECTOR_13 ((uint32_t)13) /*!< Sector Number 13 */
+#define FLASH_SECTOR_14 ((uint32_t)14) /*!< Sector Number 14 */
+#define FLASH_SECTOR_15 ((uint32_t)15) /*!< Sector Number 15 */
+#define FLASH_SECTOR_16 ((uint32_t)16) /*!< Sector Number 16 */
+#define FLASH_SECTOR_17 ((uint32_t)17) /*!< Sector Number 17 */
+#define FLASH_SECTOR_18 ((uint32_t)18) /*!< Sector Number 18 */
+#define FLASH_SECTOR_19 ((uint32_t)19) /*!< Sector Number 19 */
+#define FLASH_SECTOR_20 ((uint32_t)20) /*!< Sector Number 20 */
+#define FLASH_SECTOR_21 ((uint32_t)21) /*!< Sector Number 21 */
+#define FLASH_SECTOR_22 ((uint32_t)22) /*!< Sector Number 22 */
+#define FLASH_SECTOR_23 ((uint32_t)23) /*!< Sector Number 23 */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------- STM32F40xxx/STM32F41xxx -------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+#define FLASH_SECTOR_0 ((uint32_t)0) /*!< Sector Number 0 */
+#define FLASH_SECTOR_1 ((uint32_t)1) /*!< Sector Number 1 */
+#define FLASH_SECTOR_2 ((uint32_t)2) /*!< Sector Number 2 */
+#define FLASH_SECTOR_3 ((uint32_t)3) /*!< Sector Number 3 */
+#define FLASH_SECTOR_4 ((uint32_t)4) /*!< Sector Number 4 */
+#define FLASH_SECTOR_5 ((uint32_t)5) /*!< Sector Number 5 */
+#define FLASH_SECTOR_6 ((uint32_t)6) /*!< Sector Number 6 */
+#define FLASH_SECTOR_7 ((uint32_t)7) /*!< Sector Number 7 */
+#define FLASH_SECTOR_8 ((uint32_t)8) /*!< Sector Number 8 */
+#define FLASH_SECTOR_9 ((uint32_t)9) /*!< Sector Number 9 */
+#define FLASH_SECTOR_10 ((uint32_t)10) /*!< Sector Number 10 */
+#define FLASH_SECTOR_11 ((uint32_t)11) /*!< Sector Number 11 */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------------- STM32F401xC -------------------------------------------*/
+#if defined(STM32F401xC)
+#define FLASH_SECTOR_0 ((uint32_t)0) /*!< Sector Number 0 */
+#define FLASH_SECTOR_1 ((uint32_t)1) /*!< Sector Number 1 */
+#define FLASH_SECTOR_2 ((uint32_t)2) /*!< Sector Number 2 */
+#define FLASH_SECTOR_3 ((uint32_t)3) /*!< Sector Number 3 */
+#define FLASH_SECTOR_4 ((uint32_t)4) /*!< Sector Number 4 */
+#define FLASH_SECTOR_5 ((uint32_t)5) /*!< Sector Number 5 */
+#endif /* STM32F401xC */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F401xE/STM32F411xE/STM32F446xx ------------------------------*/
+#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define FLASH_SECTOR_0 ((uint32_t)0) /*!< Sector Number 0 */
+#define FLASH_SECTOR_1 ((uint32_t)1) /*!< Sector Number 1 */
+#define FLASH_SECTOR_2 ((uint32_t)2) /*!< Sector Number 2 */
+#define FLASH_SECTOR_3 ((uint32_t)3) /*!< Sector Number 3 */
+#define FLASH_SECTOR_4 ((uint32_t)4) /*!< Sector Number 4 */
+#define FLASH_SECTOR_5 ((uint32_t)5) /*!< Sector Number 5 */
+#define FLASH_SECTOR_6 ((uint32_t)6) /*!< Sector Number 6 */
+#define FLASH_SECTOR_7 ((uint32_t)7) /*!< Sector Number 7 */
+#endif /* STM32F401xE || STM32F411xE || STM32F446xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection
+ * @{
+ */
+/*----------------------------------------- STM32F42xxx/STM32F43xxx-------------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define OB_WRP_SECTOR_0 ((uint32_t)0x00000001) /*!< Write protection of Sector0 */
+#define OB_WRP_SECTOR_1 ((uint32_t)0x00000002) /*!< Write protection of Sector1 */
+#define OB_WRP_SECTOR_2 ((uint32_t)0x00000004) /*!< Write protection of Sector2 */
+#define OB_WRP_SECTOR_3 ((uint32_t)0x00000008) /*!< Write protection of Sector3 */
+#define OB_WRP_SECTOR_4 ((uint32_t)0x00000010) /*!< Write protection of Sector4 */
+#define OB_WRP_SECTOR_5 ((uint32_t)0x00000020) /*!< Write protection of Sector5 */
+#define OB_WRP_SECTOR_6 ((uint32_t)0x00000040) /*!< Write protection of Sector6 */
+#define OB_WRP_SECTOR_7 ((uint32_t)0x00000080) /*!< Write protection of Sector7 */
+#define OB_WRP_SECTOR_8 ((uint32_t)0x00000100) /*!< Write protection of Sector8 */
+#define OB_WRP_SECTOR_9 ((uint32_t)0x00000200) /*!< Write protection of Sector9 */
+#define OB_WRP_SECTOR_10 ((uint32_t)0x00000400) /*!< Write protection of Sector10 */
+#define OB_WRP_SECTOR_11 ((uint32_t)0x00000800) /*!< Write protection of Sector11 */
+#define OB_WRP_SECTOR_12 ((uint32_t)0x00000001 << 12) /*!< Write protection of Sector12 */
+#define OB_WRP_SECTOR_13 ((uint32_t)0x00000002 << 12) /*!< Write protection of Sector13 */
+#define OB_WRP_SECTOR_14 ((uint32_t)0x00000004 << 12) /*!< Write protection of Sector14 */
+#define OB_WRP_SECTOR_15 ((uint32_t)0x00000008 << 12) /*!< Write protection of Sector15 */
+#define OB_WRP_SECTOR_16 ((uint32_t)0x00000010 << 12) /*!< Write protection of Sector16 */
+#define OB_WRP_SECTOR_17 ((uint32_t)0x00000020 << 12) /*!< Write protection of Sector17 */
+#define OB_WRP_SECTOR_18 ((uint32_t)0x00000040 << 12) /*!< Write protection of Sector18 */
+#define OB_WRP_SECTOR_19 ((uint32_t)0x00000080 << 12) /*!< Write protection of Sector19 */
+#define OB_WRP_SECTOR_20 ((uint32_t)0x00000100 << 12) /*!< Write protection of Sector20 */
+#define OB_WRP_SECTOR_21 ((uint32_t)0x00000200 << 12) /*!< Write protection of Sector21 */
+#define OB_WRP_SECTOR_22 ((uint32_t)0x00000400 << 12) /*!< Write protection of Sector22 */
+#define OB_WRP_SECTOR_23 ((uint32_t)0x00000800 << 12) /*!< Write protection of Sector23 */
+#define OB_WRP_SECTOR_All ((uint32_t)0x00000FFF << 12) /*!< Write protection of all Sectors */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------- STM32F40xxx/STM32F41xxx -------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+#define OB_WRP_SECTOR_0 ((uint32_t)0x00000001) /*!< Write protection of Sector0 */
+#define OB_WRP_SECTOR_1 ((uint32_t)0x00000002) /*!< Write protection of Sector1 */
+#define OB_WRP_SECTOR_2 ((uint32_t)0x00000004) /*!< Write protection of Sector2 */
+#define OB_WRP_SECTOR_3 ((uint32_t)0x00000008) /*!< Write protection of Sector3 */
+#define OB_WRP_SECTOR_4 ((uint32_t)0x00000010) /*!< Write protection of Sector4 */
+#define OB_WRP_SECTOR_5 ((uint32_t)0x00000020) /*!< Write protection of Sector5 */
+#define OB_WRP_SECTOR_6 ((uint32_t)0x00000040) /*!< Write protection of Sector6 */
+#define OB_WRP_SECTOR_7 ((uint32_t)0x00000080) /*!< Write protection of Sector7 */
+#define OB_WRP_SECTOR_8 ((uint32_t)0x00000100) /*!< Write protection of Sector8 */
+#define OB_WRP_SECTOR_9 ((uint32_t)0x00000200) /*!< Write protection of Sector9 */
+#define OB_WRP_SECTOR_10 ((uint32_t)0x00000400) /*!< Write protection of Sector10 */
+#define OB_WRP_SECTOR_11 ((uint32_t)0x00000800) /*!< Write protection of Sector11 */
+#define OB_WRP_SECTOR_All ((uint32_t)0x00000FFF) /*!< Write protection of all Sectors */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------------- STM32F401xC -------------------------------------------*/
+#if defined(STM32F401xC)
+#define OB_WRP_SECTOR_0 ((uint32_t)0x00000001) /*!< Write protection of Sector0 */
+#define OB_WRP_SECTOR_1 ((uint32_t)0x00000002) /*!< Write protection of Sector1 */
+#define OB_WRP_SECTOR_2 ((uint32_t)0x00000004) /*!< Write protection of Sector2 */
+#define OB_WRP_SECTOR_3 ((uint32_t)0x00000008) /*!< Write protection of Sector3 */
+#define OB_WRP_SECTOR_4 ((uint32_t)0x00000010) /*!< Write protection of Sector4 */
+#define OB_WRP_SECTOR_5 ((uint32_t)0x00000020) /*!< Write protection of Sector5 */
+#define OB_WRP_SECTOR_All ((uint32_t)0x00000FFF) /*!< Write protection of all Sectors */
+#endif /* STM32F401xC */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F401xE/STM32F411xE/STM32F446xx ------------------------------*/
+#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define OB_WRP_SECTOR_0 ((uint32_t)0x00000001) /*!< Write protection of Sector0 */
+#define OB_WRP_SECTOR_1 ((uint32_t)0x00000002) /*!< Write protection of Sector1 */
+#define OB_WRP_SECTOR_2 ((uint32_t)0x00000004) /*!< Write protection of Sector2 */
+#define OB_WRP_SECTOR_3 ((uint32_t)0x00000008) /*!< Write protection of Sector3 */
+#define OB_WRP_SECTOR_4 ((uint32_t)0x00000010) /*!< Write protection of Sector4 */
+#define OB_WRP_SECTOR_5 ((uint32_t)0x00000020) /*!< Write protection of Sector5 */
+#define OB_WRP_SECTOR_6 ((uint32_t)0x00000040) /*!< Write protection of Sector6 */
+#define OB_WRP_SECTOR_7 ((uint32_t)0x00000080) /*!< Write protection of Sector7 */
+#define OB_WRP_SECTOR_All ((uint32_t)0x00000FFF) /*!< Write protection of all Sectors */
+#endif /* STM32F401xE || STM32F411xE || STM32F446xx */
+/*-----------------------------------------------------------------------------------------------------*/
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_PC_ReadWrite_Protection FLASH Option Bytes PC ReadWrite Protection
+ * @{
+ */
+/*----------------------------------------- STM32F42xxx/STM32F43xxx-------------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define OB_PCROP_SECTOR_0 ((uint32_t)0x00000001) /*!< PC Read/Write protection of Sector0 */
+#define OB_PCROP_SECTOR_1 ((uint32_t)0x00000002) /*!< PC Read/Write protection of Sector1 */
+#define OB_PCROP_SECTOR_2 ((uint32_t)0x00000004) /*!< PC Read/Write protection of Sector2 */
+#define OB_PCROP_SECTOR_3 ((uint32_t)0x00000008) /*!< PC Read/Write protection of Sector3 */
+#define OB_PCROP_SECTOR_4 ((uint32_t)0x00000010) /*!< PC Read/Write protection of Sector4 */
+#define OB_PCROP_SECTOR_5 ((uint32_t)0x00000020) /*!< PC Read/Write protection of Sector5 */
+#define OB_PCROP_SECTOR_6 ((uint32_t)0x00000040) /*!< PC Read/Write protection of Sector6 */
+#define OB_PCROP_SECTOR_7 ((uint32_t)0x00000080) /*!< PC Read/Write protection of Sector7 */
+#define OB_PCROP_SECTOR_8 ((uint32_t)0x00000100) /*!< PC Read/Write protection of Sector8 */
+#define OB_PCROP_SECTOR_9 ((uint32_t)0x00000200) /*!< PC Read/Write protection of Sector9 */
+#define OB_PCROP_SECTOR_10 ((uint32_t)0x00000400) /*!< PC Read/Write protection of Sector10 */
+#define OB_PCROP_SECTOR_11 ((uint32_t)0x00000800) /*!< PC Read/Write protection of Sector11 */
+#define OB_PCROP_SECTOR_12 ((uint32_t)0x00000001) /*!< PC Read/Write protection of Sector12 */
+#define OB_PCROP_SECTOR_13 ((uint32_t)0x00000002) /*!< PC Read/Write protection of Sector13 */
+#define OB_PCROP_SECTOR_14 ((uint32_t)0x00000004) /*!< PC Read/Write protection of Sector14 */
+#define OB_PCROP_SECTOR_15 ((uint32_t)0x00000008) /*!< PC Read/Write protection of Sector15 */
+#define OB_PCROP_SECTOR_16 ((uint32_t)0x00000010) /*!< PC Read/Write protection of Sector16 */
+#define OB_PCROP_SECTOR_17 ((uint32_t)0x00000020) /*!< PC Read/Write protection of Sector17 */
+#define OB_PCROP_SECTOR_18 ((uint32_t)0x00000040) /*!< PC Read/Write protection of Sector18 */
+#define OB_PCROP_SECTOR_19 ((uint32_t)0x00000080) /*!< PC Read/Write protection of Sector19 */
+#define OB_PCROP_SECTOR_20 ((uint32_t)0x00000100) /*!< PC Read/Write protection of Sector20 */
+#define OB_PCROP_SECTOR_21 ((uint32_t)0x00000200) /*!< PC Read/Write protection of Sector21 */
+#define OB_PCROP_SECTOR_22 ((uint32_t)0x00000400) /*!< PC Read/Write protection of Sector22 */
+#define OB_PCROP_SECTOR_23 ((uint32_t)0x00000800) /*!< PC Read/Write protection of Sector23 */
+#define OB_PCROP_SECTOR_All ((uint32_t)0x00000FFF) /*!< PC Read/Write protection of all Sectors */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------------- STM32F401xC -------------------------------------------*/
+#if defined(STM32F401xC)
+#define OB_PCROP_SECTOR_0 ((uint32_t)0x00000001) /*!< PC Read/Write protection of Sector0 */
+#define OB_PCROP_SECTOR_1 ((uint32_t)0x00000002) /*!< PC Read/Write protection of Sector1 */
+#define OB_PCROP_SECTOR_2 ((uint32_t)0x00000004) /*!< PC Read/Write protection of Sector2 */
+#define OB_PCROP_SECTOR_3 ((uint32_t)0x00000008) /*!< PC Read/Write protection of Sector3 */
+#define OB_PCROP_SECTOR_4 ((uint32_t)0x00000010) /*!< PC Read/Write protection of Sector4 */
+#define OB_PCROP_SECTOR_5 ((uint32_t)0x00000020) /*!< PC Read/Write protection of Sector5 */
+#define OB_PCROP_SECTOR_All ((uint32_t)0x00000FFF) /*!< PC Read/Write protection of all Sectors */
+#endif /* STM32F401xC */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*------------------------------ STM32F401xE/STM32F411xE/STM32F446xx ----------------------------------*/
+#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define OB_PCROP_SECTOR_0 ((uint32_t)0x00000001) /*!< PC Read/Write protection of Sector0 */
+#define OB_PCROP_SECTOR_1 ((uint32_t)0x00000002) /*!< PC Read/Write protection of Sector1 */
+#define OB_PCROP_SECTOR_2 ((uint32_t)0x00000004) /*!< PC Read/Write protection of Sector2 */
+#define OB_PCROP_SECTOR_3 ((uint32_t)0x00000008) /*!< PC Read/Write protection of Sector3 */
+#define OB_PCROP_SECTOR_4 ((uint32_t)0x00000010) /*!< PC Read/Write protection of Sector4 */
+#define OB_PCROP_SECTOR_5 ((uint32_t)0x00000020) /*!< PC Read/Write protection of Sector5 */
+#define OB_PCROP_SECTOR_6 ((uint32_t)0x00000040) /*!< PC Read/Write protection of Sector6 */
+#define OB_PCROP_SECTOR_7 ((uint32_t)0x00000080) /*!< PC Read/Write protection of Sector7 */
+#define OB_PCROP_SECTOR_All ((uint32_t)0x00000FFF) /*!< PC Read/Write protection of all Sectors */
+#endif /* STM32F401xE || STM32F411xE || STM32F446xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Dual_Boot FLASH Dual Boot
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define OB_DUAL_BOOT_ENABLE ((uint8_t)0x10) /*!< Dual Bank Boot Enable */
+#define OB_DUAL_BOOT_DISABLE ((uint8_t)0x00) /*!< Dual Bank Boot Disable, always boot on User Flash */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Selection_Protection_Mode FLASH Selection Protection Mode
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define OB_PCROP_DESELECTED ((uint8_t)0x00) /*!< Disabled PcROP, nWPRi bits used for Write Protection on sector i */
+#define OB_PCROP_SELECTED ((uint8_t)0x80) /*!< Enable PcROP, nWPRi bits used for PCRoP Protection on sector i */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASHEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup FLASHEx_Exported_Functions_Group1
+ * @{
+ */
+/* Extension Program operation functions *************************************/
+HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError);
+HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit);
+HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
+void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+HAL_StatusTypeDef HAL_FLASHEx_AdvOBProgram (FLASH_AdvOBProgramInitTypeDef *pAdvOBInit);
+void HAL_FLASHEx_AdvOBGetConfig(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit);
+HAL_StatusTypeDef HAL_FLASHEx_OB_SelectPCROP(void);
+HAL_StatusTypeDef HAL_FLASHEx_OB_DeSelectPCROP(void);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+uint16_t HAL_FLASHEx_OB_GetBank2WRP(void);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup FLASHEx_Private_Constants FLASH Private Constants
+ * @{
+ */
+/*--------------------------------------- STM32F42xxx/STM32F43xxx--------------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define FLASH_SECTOR_TOTAL 24
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+/*--------------------------------------- STM32F40xxx/STM32F41xxx -------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+#define FLASH_SECTOR_TOTAL 12
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+/*--------------------------------------------- STM32F401xC -------------------------------------------*/
+#if defined(STM32F401xC)
+#define FLASH_SECTOR_TOTAL 6
+#endif /* STM32F401xC */
+
+/*--------------------------------- STM32F401xE/STM32F411xE/STM32F446xx -------------------------------*/
+#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define FLASH_SECTOR_TOTAL 8
+#endif /* STM32F401xE || STM32F411xE || STM32F446xx */
+
+/**
+ * @brief OPTCR1 register byte 2 (Bits[23:16]) base address
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define OPTCR1_BYTE2_ADDRESS ((uint32_t)0x40023C1A)
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup FLASHEx_Private_Macros FLASH Private Macros
+ * @{
+ */
+
+/** @defgroup FLASHEx_IS_FLASH_Definitions FLASH Private macros to check input parameters
+ * @{
+ */
+
+#define IS_FLASH_TYPEERASE(VALUE)(((VALUE) == FLASH_TYPEERASE_SECTORS) || \
+ ((VALUE) == FLASH_TYPEERASE_MASSERASE))
+
+#define IS_VOLTAGERANGE(RANGE)(((RANGE) == FLASH_VOLTAGE_RANGE_1) || \
+ ((RANGE) == FLASH_VOLTAGE_RANGE_2) || \
+ ((RANGE) == FLASH_VOLTAGE_RANGE_3) || \
+ ((RANGE) == FLASH_VOLTAGE_RANGE_4))
+
+#define IS_WRPSTATE(VALUE)(((VALUE) == OB_WRPSTATE_DISABLE) || \
+ ((VALUE) == OB_WRPSTATE_ENABLE))
+
+#define IS_OPTIONBYTE(VALUE)(((VALUE) <= (OPTIONBYTE_WRP|OPTIONBYTE_RDP|OPTIONBYTE_USER|OPTIONBYTE_BOR)))
+
+#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\
+ ((LEVEL) == OB_RDP_LEVEL_1))/*||\
+ ((LEVEL) == OB_RDP_LEVEL_2))*/
+
+#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
+
+#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
+
+#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
+
+#define IS_OB_BOR_LEVEL(LEVEL) (((LEVEL) == OB_BOR_LEVEL1) || ((LEVEL) == OB_BOR_LEVEL2) ||\
+ ((LEVEL) == OB_BOR_LEVEL3) || ((LEVEL) == OB_BOR_OFF))
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define IS_PCROPSTATE(VALUE)(((VALUE) == OB_PCROP_STATE_DISABLE) || \
+ ((VALUE) == OB_PCROP_STATE_ENABLE))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+#define IS_OBEX(VALUE)(((VALUE) == OPTIONBYTE_PCROP) || \
+ ((VALUE) == OPTIONBYTE_BOOTCONFIG))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define IS_OBEX(VALUE)(((VALUE) == OPTIONBYTE_PCROP))
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \
+ ((LATENCY) == FLASH_LATENCY_1) || \
+ ((LATENCY) == FLASH_LATENCY_2) || \
+ ((LATENCY) == FLASH_LATENCY_3) || \
+ ((LATENCY) == FLASH_LATENCY_4) || \
+ ((LATENCY) == FLASH_LATENCY_5) || \
+ ((LATENCY) == FLASH_LATENCY_6) || \
+ ((LATENCY) == FLASH_LATENCY_7) || \
+ ((LATENCY) == FLASH_LATENCY_8) || \
+ ((LATENCY) == FLASH_LATENCY_9) || \
+ ((LATENCY) == FLASH_LATENCY_10) || \
+ ((LATENCY) == FLASH_LATENCY_11) || \
+ ((LATENCY) == FLASH_LATENCY_12) || \
+ ((LATENCY) == FLASH_LATENCY_13) || \
+ ((LATENCY) == FLASH_LATENCY_14) || \
+ ((LATENCY) == FLASH_LATENCY_15))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \
+ ((LATENCY) == FLASH_LATENCY_1) || \
+ ((LATENCY) == FLASH_LATENCY_2) || \
+ ((LATENCY) == FLASH_LATENCY_3) || \
+ ((LATENCY) == FLASH_LATENCY_4) || \
+ ((LATENCY) == FLASH_LATENCY_5) || \
+ ((LATENCY) == FLASH_LATENCY_6) || \
+ ((LATENCY) == FLASH_LATENCY_7))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1) || \
+ ((BANK) == FLASH_BANK_2) || \
+ ((BANK) == FLASH_BANK_BOTH))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define IS_FLASH_SECTOR(SECTOR) ( ((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
+ ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
+ ((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\
+ ((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7) ||\
+ ((SECTOR) == FLASH_SECTOR_8) || ((SECTOR) == FLASH_SECTOR_9) ||\
+ ((SECTOR) == FLASH_SECTOR_10) || ((SECTOR) == FLASH_SECTOR_11) ||\
+ ((SECTOR) == FLASH_SECTOR_12) || ((SECTOR) == FLASH_SECTOR_13) ||\
+ ((SECTOR) == FLASH_SECTOR_14) || ((SECTOR) == FLASH_SECTOR_15) ||\
+ ((SECTOR) == FLASH_SECTOR_16) || ((SECTOR) == FLASH_SECTOR_17) ||\
+ ((SECTOR) == FLASH_SECTOR_18) || ((SECTOR) == FLASH_SECTOR_19) ||\
+ ((SECTOR) == FLASH_SECTOR_20) || ((SECTOR) == FLASH_SECTOR_21) ||\
+ ((SECTOR) == FLASH_SECTOR_22) || ((SECTOR) == FLASH_SECTOR_23))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
+ ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
+ ((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\
+ ((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7) ||\
+ ((SECTOR) == FLASH_SECTOR_8) || ((SECTOR) == FLASH_SECTOR_9) ||\
+ ((SECTOR) == FLASH_SECTOR_10) || ((SECTOR) == FLASH_SECTOR_11))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F401xC)
+#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
+ ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
+ ((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5))
+#endif /* STM32F401xC */
+
+#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
+ ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
+ ((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\
+ ((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7))
+#endif /* STM32F401xE || STM32F411xE || STM32F446xx */
+
+#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && ((ADDRESS) <= FLASH_END))
+#define IS_FLASH_NBSECTORS(NBSECTORS) (((NBSECTORS) != 0) && ((NBSECTORS) <= FLASH_SECTOR_TOTAL))
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & (uint32_t)0xFF000000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F401xC)
+#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F401xC */
+
+#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F401xE || STM32F411xE || STM32F446xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define IS_OB_PCROP(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+#if defined(STM32F401xC)
+#define IS_OB_PCROP(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F401xC */
+
+#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define IS_OB_PCROP(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F401xE || STM32F411xE || STM32F446xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define IS_OB_BOOT(BOOT) (((BOOT) == OB_DUAL_BOOT_ENABLE) || ((BOOT) == OB_DUAL_BOOT_DISABLE))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+#define IS_OB_PCROP_SELECT(PCROP) (((PCROP) == OB_PCROP_SELECTED) || ((PCROP) == OB_PCROP_DESELECTED))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup FLASHEx_Private_Functions FLASH Private Functions
+ * @{
+ */
+void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_FLASH_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_flash_ramfunc.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,97 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_flash_ramfunc.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of FLASH RAMFUNC driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_FLASH_RAMFUNC_H
+#define __STM32F4xx_FLASH_RAMFUNC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F411xE) || defined(STM32F446xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASHRAMFUNC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASHRAMFUNC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup FLASHRAMFUNC_Exported_Functions_Group1
+ * @{
+ */
+__RAM_FUNC HAL_FLASHEx_StopFlashInterfaceClk(void);
+__RAM_FUNC HAL_FLASHEx_StartFlashInterfaceClk(void);
+__RAM_FUNC HAL_FLASHEx_EnableFlashSleepMode(void);
+__RAM_FUNC HAL_FLASHEx_DisableFlashSleepMode(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F411xE */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_FLASH_RAMFUNC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_fmpi2c.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,577 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_fmpi2c.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of FMPI2C HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_FMPI2C_H
+#define __STM32F4xx_HAL_FMPI2C_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F446xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FMPI2C
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup FMPI2C_Exported_Types FMPI2C Exported Types
+ * @{
+ */
+
+/**
+ * @brief FMPI2C Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Timing; /*!< Specifies the FMPI2C_TIMINGR_register value.
+ This parameter calculated by referring to FMPI2C initialization
+ section in Reference manual */
+
+ uint32_t OwnAddress1; /*!< Specifies the first device own address.
+ This parameter can be a 7-bit or 10-bit address. */
+
+ uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
+ This parameter can be a value of @ref FMPI2C_addressing_mode */
+
+ uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
+ This parameter can be a value of @ref FMPI2C_dual_addressing_mode */
+
+ uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
+ This parameter can be a 7-bit address. */
+
+ uint32_t OwnAddress2Masks; /*!< Specifies the acknoledge mask address second device own address if dual addressing mode is selected
+ This parameter can be a value of @ref FMPI2C_own_address2_masks */
+
+ uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
+ This parameter can be a value of @ref FMPI2C_general_call_addressing_mode */
+
+ uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
+ This parameter can be a value of @ref FMPI2C_nostretch_mode */
+
+}FMPI2C_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_FMPI2C_STATE_RESET = 0x00, /*!< FMPI2C not yet initialized or disabled */
+ HAL_FMPI2C_STATE_READY = 0x01, /*!< FMPI2C initialized and ready for use */
+ HAL_FMPI2C_STATE_BUSY = 0x02, /*!< FMPI2C internal process is ongoing */
+ HAL_FMPI2C_STATE_MASTER_BUSY_TX = 0x12, /*!< Master Data Transmission process is ongoing */
+ HAL_FMPI2C_STATE_MASTER_BUSY_RX = 0x22, /*!< Master Data Reception process is ongoing */
+ HAL_FMPI2C_STATE_SLAVE_BUSY_TX = 0x32, /*!< Slave Data Transmission process is ongoing */
+ HAL_FMPI2C_STATE_SLAVE_BUSY_RX = 0x42, /*!< Slave Data Reception process is ongoing */
+ HAL_FMPI2C_STATE_MEM_BUSY_TX = 0x52, /*!< Memory Data Transmission process is ongoing */
+ HAL_FMPI2C_STATE_MEM_BUSY_RX = 0x62, /*!< Memory Data Reception process is ongoing */
+ HAL_FMPI2C_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_FMPI2C_STATE_ERROR = 0x04 /*!< Reception process is ongoing */
+}HAL_FMPI2C_StateTypeDef;
+
+/**
+ * @brief HAL FMPI2C Error Code structure definition
+ */
+typedef enum
+{
+ HAL_FMPI2C_ERROR_NONE = 0x00, /*!< No error */
+ HAL_FMPI2C_ERROR_BERR = 0x01, /*!< BERR error */
+ HAL_FMPI2C_ERROR_ARLO = 0x02, /*!< ARLO error */
+ HAL_FMPI2C_ERROR_AF = 0x04, /*!< ACKF error */
+ HAL_FMPI2C_ERROR_OVR = 0x08, /*!< OVR error */
+ HAL_FMPI2C_ERROR_DMA = 0x10, /*!< DMA transfer error */
+ HAL_FMPI2C_ERROR_TIMEOUT = 0x20, /*!< Timeout error */
+ HAL_FMPI2C_ERROR_SIZE = 0x40 /*!< Size Management error */
+}HAL_FMPI2C_ErrorTypeDef;
+
+/**
+ * @brief FMPI2C handle Structure definition
+ */
+typedef struct
+{
+ FMPI2C_TypeDef *Instance; /*!< FMPI2C registers base address */
+
+ FMPI2C_InitTypeDef Init; /*!< FMPI2C communication parameters */
+
+ uint8_t *pBuffPtr; /*!< Pointer to FMPI2C transfer buffer */
+
+ uint16_t XferSize; /*!< FMPI2C transfer size */
+
+ __IO uint16_t XferCount; /*!< FMPI2C transfer counter */
+
+ DMA_HandleTypeDef *hdmatx; /*!< FMPI2C Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< FMPI2C Rx DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< FMPI2C locking object */
+
+ __IO HAL_FMPI2C_StateTypeDef State; /*!< FMPI2C communication state */
+
+ __IO HAL_FMPI2C_ErrorTypeDef ErrorCode; /* FMPI2C Error code */
+
+}FMPI2C_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup FMPI2C_Exported_Constants FMPI2C Exported Constants
+ * @{
+ */
+
+/** @defgroup FMPI2C_addressing_mode FMPI2C addressing mode
+ * @{
+ */
+#define FMPI2C_ADDRESSINGMODE_7BIT ((uint32_t)0x00000001)
+#define FMPI2C_ADDRESSINGMODE_10BIT ((uint32_t)0x00000002)
+
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_dual_addressing_mode FMPI2C dual addressing mode
+ * @{
+ */
+
+#define FMPI2C_DUALADDRESS_DISABLE ((uint32_t)0x00000000)
+#define FMPI2C_DUALADDRESS_ENABLE FMPI2C_OAR2_OA2EN
+
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_own_address2_masks FMPI2C own address2 masks
+ * @{
+ */
+
+#define FMPI2C_OA2_NOMASK ((uint8_t)0x00)
+#define FMPI2C_OA2_MASK01 ((uint8_t)0x01)
+#define FMPI2C_OA2_MASK02 ((uint8_t)0x02)
+#define FMPI2C_OA2_MASK03 ((uint8_t)0x03)
+#define FMPI2C_OA2_MASK04 ((uint8_t)0x04)
+#define FMPI2C_OA2_MASK05 ((uint8_t)0x05)
+#define FMPI2C_OA2_MASK06 ((uint8_t)0x06)
+#define FMPI2C_OA2_MASK07 ((uint8_t)0x07)
+
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_general_call_addressing_mode FMPI2C general call addressing mode
+ * @{
+ */
+#define FMPI2C_GENERALCALL_DISABLE ((uint32_t)0x00000000)
+#define FMPI2C_GENERALCALL_ENABLE FMPI2C_CR1_GCEN
+
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_nostretch_mode FMPI2C nostretch mode
+ * @{
+ */
+#define FMPI2C_NOSTRETCH_DISABLE ((uint32_t)0x00000000)
+#define FMPI2C_NOSTRETCH_ENABLE FMPI2C_CR1_NOSTRETCH
+
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_Memory_Address_Size FMPI2C Memory Address Size
+ * @{
+ */
+#define FMPI2C_MEMADD_SIZE_8BIT ((uint32_t)0x00000001)
+#define FMPI2C_MEMADD_SIZE_16BIT ((uint32_t)0x00000002)
+
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_ReloadEndMode_definition FMPI2C ReloadEndMode definition
+ * @{
+ */
+
+#define FMPI2C_RELOAD_MODE FMPI2C_CR2_RELOAD
+#define FMPI2C_AUTOEND_MODE FMPI2C_CR2_AUTOEND
+#define FMPI2C_SOFTEND_MODE ((uint32_t)0x00000000)
+
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_StartStopMode_definition FMPI2C StartStopMode definition
+ * @{
+ */
+
+#define FMPI2C_NO_STARTSTOP ((uint32_t)0x00000000)
+#define FMPI2C_GENERATE_STOP FMPI2C_CR2_STOP
+#define FMPI2C_GENERATE_START_READ (uint32_t)(FMPI2C_CR2_START | FMPI2C_CR2_RD_WRN)
+#define FMPI2C_GENERATE_START_WRITE FMPI2C_CR2_START
+
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2C_Interrupt_configuration_definition FMPI2C Interrupt configuration definition
+ * @brief FMPI2C Interrupt definition
+ * Elements values convention: 0xXXXXXXXX
+ * - XXXXXXXX : Interrupt control mask
+ * @{
+ */
+#define FMPI2C_IT_ERRI FMPI2C_CR1_ERRIE
+#define FMPI2C_IT_TCI FMPI2C_CR1_TCIE
+#define FMPI2C_IT_STOPI FMPI2C_CR1_STOPIE
+#define FMPI2C_IT_NACKI FMPI2C_CR1_NACKIE
+#define FMPI2C_IT_ADDRI FMPI2C_CR1_ADDRIE
+#define FMPI2C_IT_RXI FMPI2C_CR1_RXIE
+#define FMPI2C_IT_TXI FMPI2C_CR1_TXIE
+
+/**
+ * @}
+ */
+
+
+/** @defgroup FMPI2C_Flag_definition FMPI2C Flag definition
+ * @{
+ */
+
+#define FMPI2C_FLAG_TXE FMPI2C_ISR_TXE
+#define FMPI2C_FLAG_TXIS FMPI2C_ISR_TXIS
+#define FMPI2C_FLAG_RXNE FMPI2C_ISR_RXNE
+#define FMPI2C_FLAG_ADDR FMPI2C_ISR_ADDR
+#define FMPI2C_FLAG_AF FMPI2C_ISR_NACKF
+#define FMPI2C_FLAG_STOPF FMPI2C_ISR_STOPF
+#define FMPI2C_FLAG_TC FMPI2C_ISR_TC
+#define FMPI2C_FLAG_TCR FMPI2C_ISR_TCR
+#define FMPI2C_FLAG_BERR FMPI2C_ISR_BERR
+#define FMPI2C_FLAG_ARLO FMPI2C_ISR_ARLO
+#define FMPI2C_FLAG_OVR FMPI2C_ISR_OVR
+#define FMPI2C_FLAG_PECERR FMPI2C_ISR_PECERR
+#define FMPI2C_FLAG_TIMEOUT FMPI2C_ISR_TIMEOUT
+#define FMPI2C_FLAG_ALERT FMPI2C_ISR_ALERT
+#define FMPI2C_FLAG_BUSY FMPI2C_ISR_BUSY
+#define FMPI2C_FLAG_DIR FMPI2C_ISR_DIR
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup FMPI2C_Exported_Macros FMPI2C Exported Macros
+ * @{
+ */
+
+/** @brief Reset FMPI2C handle state
+ * @param __HANDLE__: specifies the FMPI2C Handle.
+ * This parameter can be FMPI2C where x: 1 or 2 to select the FMPI2C peripheral.
+ * @retval None
+ */
+#define __HAL_FMPI2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_FMPI2C_STATE_RESET)
+
+/** @brief Enables or disables the specified FMPI2C interrupts.
+ * @param __HANDLE__: specifies the FMPI2C Handle.
+ * This parameter can be FMPI2C where x: 1 or 2 to select the FMPI2C peripheral.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg FMPI2C_IT_ERRI: Errors interrupt enable
+ * @arg FMPI2C_IT_TCI: Transfer complete interrupt enable
+ * @arg FMPI2C_IT_STOPI: STOP detection interrupt enable
+ * @arg FMPI2C_IT_NACKI: NACK received interrupt enable
+ * @arg FMPI2C_IT_ADDRI: Address match interrupt enable
+ * @arg FMPI2C_IT_RXI: RX interrupt enable
+ * @arg FMPI2C_IT_TXI: TX interrupt enable
+ *
+ * @retval None
+ */
+
+#define __HAL_FMPI2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
+#define __HAL_FMPI2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
+
+/** @brief Checks if the specified FMPI2C interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the FMPI2C Handle.
+ * This parameter can be FMPI2C where x: 1 or 2 to select the FMPI2C peripheral.
+ * @param __INTERRUPT__: specifies the FMPI2C interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg FMPI2C_IT_ERRI: Errors interrupt enable
+ * @arg FMPI2C_IT_TCI: Transfer complete interrupt enable
+ * @arg FMPI2C_IT_STOPI: STOP detection interrupt enable
+ * @arg FMPI2C_IT_NACKI: NACK received interrupt enable
+ * @arg FMPI2C_IT_ADDRI: Address match interrupt enable
+ * @arg FMPI2C_IT_RXI: RX interrupt enable
+ * @arg FMPI2C_IT_TXI: TX interrupt enable
+ *
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_FMPI2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified FMPI2C flag is set or not.
+ * @param __HANDLE__: specifies the FMPI2C Handle.
+ * This parameter can be FMPI2C where x: 1 or 2 to select the FMPI2C peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg FMPI2C_FLAG_TXE: Transmit data register empty
+ * @arg FMPI2C_FLAG_TXIS: Transmit interrupt status
+ * @arg FMPI2C_FLAG_RXNE: Receive data register not empty
+ * @arg FMPI2C_FLAG_ADDR: Address matched (slave mode)
+ * @arg FMPI2C_FLAG_AF: Acknowledge failure received flag
+ * @arg FMPI2C_FLAG_STOPF: STOP detection flag
+ * @arg FMPI2C_FLAG_TC: Transfer complete (master mode)
+ * @arg FMPI2C_FLAG_TCR: Transfer complete reload
+ * @arg FMPI2C_FLAG_BERR: Bus error
+ * @arg FMPI2C_FLAG_ARLO: Arbitration lost
+ * @arg FMPI2C_FLAG_OVR: Overrun/Underrun
+ * @arg FMPI2C_FLAG_PECERR: PEC error in reception
+ * @arg FMPI2C_FLAG_TIMEOUT: Timeout or Tlow detection flag
+ * @arg FMPI2C_FLAG_ALERT: SMBus alert
+ * @arg FMPI2C_FLAG_BUSY: Bus busy
+ * @arg FMPI2C_FLAG_DIR: Transfer direction (slave mode)
+ *
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_FMPI2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__) & FMPI2C_FLAG_MASK)) == ((__FLAG__) & FMPI2C_FLAG_MASK)))
+
+/** @brief Clears the FMPI2C pending flags which are cleared by writing 1 in a specific bit.
+ * @param __HANDLE__: specifies the FMPI2C Handle.
+ * This parameter can be FMPI2C where x: 1 or 2 to select the FMPI2C peripheral.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg FMPI2C_FLAG_ADDR: Address matched (slave mode)
+ * @arg FMPI2C_FLAG_AF: Acknowledge failure received flag
+ * @arg FMPI2C_FLAG_STOPF: STOP detection flag
+ * @arg FMPI2C_FLAG_BERR: Bus error
+ * @arg FMPI2C_FLAG_ARLO: Arbitration lost
+ * @arg FMPI2C_FLAG_OVR: Overrun/Underrun
+ * @arg FMPI2C_FLAG_PECERR: PEC error in reception
+ * @arg FMPI2C_FLAG_TIMEOUT: Timeout or Tlow detection flag
+ * @arg FMPI2C_FLAG_ALERT: SMBus alert
+ *
+ * @retval None
+ */
+#define __HAL_FMPI2C_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = ((__FLAG__) & FMPI2C_FLAG_MASK))
+
+
+#define __HAL_FMPI2C_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= FMPI2C_CR1_PE)
+#define __HAL_FMPI2C_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~FMPI2C_CR1_PE)
+
+#define __HAL_FMPI2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(FMPI2C_CR2_SADD | FMPI2C_CR2_HEAD10R | FMPI2C_CR2_NBYTES | FMPI2C_CR2_RELOAD | FMPI2C_CR2_RD_WRN)))
+
+#define __HAL_FMPI2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00))) >> 8)))
+#define __HAL_FMPI2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FF))))
+
+#define __HAL_FMPI2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == FMPI2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (FMPI2C_CR2_SADD)) | (FMPI2C_CR2_START) | (FMPI2C_CR2_AUTOEND)) & (~FMPI2C_CR2_RD_WRN)) : \
+ (uint32_t)((((uint32_t)(__ADDRESS__) & (FMPI2C_CR2_SADD)) | (FMPI2C_CR2_ADD10) | (FMPI2C_CR2_START)) & (~FMPI2C_CR2_RD_WRN)))
+
+#define IS_FMPI2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= (uint32_t)0x000003FF)
+#define IS_FMPI2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FF)
+
+/**
+ * @}
+ */
+
+/* Include FMPI2C HAL Extension module */
+#include "stm32f4xx_hal_fmpi2c_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FMPI2C_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup FMPI2C_Exported_Functions_Group1
+ * @{
+ */
+
+/* Initialization/de-initialization functions**********************************/
+HAL_StatusTypeDef HAL_FMPI2C_Init(FMPI2C_HandleTypeDef *hFMPI2C);
+HAL_StatusTypeDef HAL_FMPI2C_DeInit (FMPI2C_HandleTypeDef *hFMPI2C);
+void HAL_FMPI2C_MspInit(FMPI2C_HandleTypeDef *hFMPI2C);
+void HAL_FMPI2C_MspDeInit(FMPI2C_HandleTypeDef *hFMPI2C);
+
+/**
+ * @}
+ */
+
+/** @addtogroup FMPI2C_Exported_Functions_Group2
+ * @{
+ */
+
+/* I/O operation functions ***************************************************/
+ /******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_FMPI2C_Master_Receive(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Write(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Read(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_FMPI2C_IsDeviceReady(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+
+ /******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+ /******* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+ /******* FMPI2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_FMPI2C_EV_IRQHandler(FMPI2C_HandleTypeDef *hFMPI2C);
+void HAL_FMPI2C_ER_IRQHandler(FMPI2C_HandleTypeDef *hFMPI2C);
+void HAL_FMPI2C_MasterTxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C);
+void HAL_FMPI2C_MasterRxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C);
+void HAL_FMPI2C_SlaveTxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C);
+void HAL_FMPI2C_SlaveRxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C);
+void HAL_FMPI2C_MemTxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C);
+void HAL_FMPI2C_MemRxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C);
+void HAL_FMPI2C_ErrorCallback(FMPI2C_HandleTypeDef *hFMPI2C);
+/**
+ * @}
+ */
+
+/** @addtogroup FMPI2C_Exported_Functions_Group3
+ * @{
+ */
+
+/* Peripheral State functions ************************************************/
+HAL_FMPI2C_StateTypeDef HAL_FMPI2C_GetState(FMPI2C_HandleTypeDef *hFMPI2C);
+uint32_t HAL_FMPI2C_GetError(FMPI2C_HandleTypeDef *hFMPI2C);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup FMPI2C_Private_Constants FMPI2C Private Constants
+ * @{
+ */
+#define FMPI2C_FLAG_MASK ((uint32_t)0x0001FFFF)
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup FMPI2C_Private_Macros FMPI2C Private Macros
+ * @{
+ */
+
+#define IS_FMPI2C_ADDRESSING_MODE(MODE) (((MODE) == FMPI2C_ADDRESSINGMODE_7BIT) || \
+ ((MODE) == FMPI2C_ADDRESSINGMODE_10BIT))
+
+#define IS_FMPI2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == FMPI2C_DUALADDRESS_DISABLE) || \
+ ((ADDRESS) == FMPI2C_DUALADDRESS_ENABLE))
+
+#define IS_FMPI2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == FMPI2C_OA2_NOMASK) || \
+ ((MASK) == FMPI2C_OA2_MASK01) || \
+ ((MASK) == FMPI2C_OA2_MASK02) || \
+ ((MASK) == FMPI2C_OA2_MASK03) || \
+ ((MASK) == FMPI2C_OA2_MASK04) || \
+ ((MASK) == FMPI2C_OA2_MASK05) || \
+ ((MASK) == FMPI2C_OA2_MASK06) || \
+ ((MASK) == FMPI2C_OA2_MASK07))
+
+#define IS_FMPI2C_GENERAL_CALL(CALL) (((CALL) == FMPI2C_GENERALCALL_DISABLE) || \
+ ((CALL) == FMPI2C_GENERALCALL_ENABLE))
+
+#define IS_FMPI2C_NO_STRETCH(STRETCH) (((STRETCH) == FMPI2C_NOSTRETCH_DISABLE) || \
+ ((STRETCH) == FMPI2C_NOSTRETCH_ENABLE))
+
+#define IS_FMPI2C_MEMADD_SIZE(SIZE) (((SIZE) == FMPI2C_MEMADD_SIZE_8BIT) || \
+ ((SIZE) == FMPI2C_MEMADD_SIZE_16BIT))
+
+#define IS_TRANSFER_MODE(MODE) (((MODE) == FMPI2C_RELOAD_MODE) || \
+ ((MODE) == FMPI2C_AUTOEND_MODE) || \
+ ((MODE) == FMPI2C_SOFTEND_MODE))
+
+#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == FMPI2C_GENERATE_STOP) || \
+ ((REQUEST) == FMPI2C_GENERATE_START_READ) || \
+ ((REQUEST) == FMPI2C_GENERATE_START_WRITE) || \
+ ((REQUEST) == FMPI2C_NO_STARTSTOP))
+
+/**
+ * @}
+ */
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup FMPI2C_Private_Functions FMPI2C Private Functions
+ * @brief FMPI2C private functions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F446xx */
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_FMPI2C_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_fmpi2c_ex.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,151 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_fmpi2c_ex.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of FMPI2C HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_FMPI2C_EX_H
+#define __STM32F4xx_HAL_FMPI2C_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F446xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FMPI2CEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FMPI2CEx_Exported_Constants FMPI2C Exported Constants
+ * @{
+ */
+
+/** @defgroup FMPI2CEx_Analog_Filter FMPI2C Analog Filter
+ * @{
+ */
+#define FMPI2C_ANALOGFILTER_ENABLE ((uint32_t)0x00000000)
+#define FMPI2C_ANALOGFILTER_DISABLE FMPI2C_CR1_ANFOFF
+/**
+ * @}
+ */
+
+/** @defgroup FMPI2CEx_FastModePlus FMPI2C Fast Mode Plus
+ * @{
+ */
+#define FMPI2C_FASTMODEPLUS_SCL SYSCFG_CFGR_FMPI2C1_SCL /*!< Enable Fast Mode Plus on FMPI2C1 SCL pins */
+#define FMPI2C_FASTMODEPLUS_SDA SYSCFG_CFGR_FMPI2C1_SDA /*!< Enable Fast Mode Plus on FMPI2C1 SDA pins */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FMPI2CEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup FMPI2CEx_Exported_Functions_Group1
+ * @{
+ */
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_FMPI2CEx_AnalogFilter_Config(FMPI2C_HandleTypeDef *hFMPI2C, uint32_t AnalogFilter);
+HAL_StatusTypeDef HAL_FMPI2CEx_DigitalFilter_Config(FMPI2C_HandleTypeDef *hFMPI2C, uint32_t DigitalFilter);
+HAL_StatusTypeDef HAL_FMPI2CEx_EnableWakeUp (FMPI2C_HandleTypeDef *hFMPI2C);
+HAL_StatusTypeDef HAL_FMPI2CEx_DisableWakeUp (FMPI2C_HandleTypeDef *hFMPI2C);
+void HAL_FMPI2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus);
+void HAL_FMPI2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Constants I2C Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Macros I2C Private Macros
+ * @{
+ */
+#define IS_FMPI2C_ANALOG_FILTER(FILTER) (((FILTER) == FMPI2C_ANALOGFILTER_ENABLE) || \
+ ((FILTER) == FMPI2C_ANALOGFILTER_DISABLE))
+
+#define IS_FMPI2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000F)
+
+#define IS_FMPI2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & (FMPI2C_FASTMODEPLUS_SCL)) == FMPI2C_FASTMODEPLUS_SCL) || \
+ (((__CONFIG__) & (FMPI2C_FASTMODEPLUS_SDA)) == FMPI2C_FASTMODEPLUS_SDA))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F446xx */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_FMPI2C_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_gpio.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,327 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_gpio.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of GPIO HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_GPIO_H
+#define __STM32F4xx_HAL_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup GPIO
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Types GPIO Exported Types
+ * @{
+ */
+
+/**
+ * @brief GPIO Init structure definition
+ */
+typedef struct
+{
+ uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
+ This parameter can be any value of @ref GPIO_pins_define */
+
+ uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref GPIO_mode_define */
+
+ uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
+ This parameter can be a value of @ref GPIO_pull_define */
+
+ uint32_t Speed; /*!< Specifies the speed for the selected pins.
+ This parameter can be a value of @ref GPIO_speed_define */
+
+ uint32_t Alternate; /*!< Peripheral to be connected to the selected pins.
+ This parameter can be a value of @ref GPIO_Alternate_function_selection */
+}GPIO_InitTypeDef;
+
+/**
+ * @brief GPIO Bit SET and Bit RESET enumeration
+ */
+typedef enum
+{
+ GPIO_PIN_RESET = 0,
+ GPIO_PIN_SET
+}GPIO_PinState;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
+ * @{
+ */
+
+/** @defgroup GPIO_pins_define GPIO pins define
+ * @{
+ */
+#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */
+#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */
+#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */
+#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */
+#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */
+#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */
+#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */
+#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */
+#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */
+#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */
+#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */
+#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */
+#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */
+#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */
+#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */
+#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */
+#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */
+
+#define GPIO_PIN_MASK ((uint32_t)0x0000FFFF) /* PIN mask for assert test */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_mode_define GPIO mode define
+ * @brief GPIO Configuration Mode
+ * Elements values convention: 0xX0yz00YZ
+ * - X : GPIO mode or EXTI Mode
+ * - y : External IT or Event trigger detection
+ * - z : IO configuration on External IT or Event
+ * - Y : Output type (Push Pull or Open Drain)
+ * - Z : IO Direction mode (Input, Output, Alternate or Analog)
+ * @{
+ */
+#define GPIO_MODE_INPUT ((uint32_t)0x00000000) /*!< Input Floating Mode */
+#define GPIO_MODE_OUTPUT_PP ((uint32_t)0x00000001) /*!< Output Push Pull Mode */
+#define GPIO_MODE_OUTPUT_OD ((uint32_t)0x00000011) /*!< Output Open Drain Mode */
+#define GPIO_MODE_AF_PP ((uint32_t)0x00000002) /*!< Alternate Function Push Pull Mode */
+#define GPIO_MODE_AF_OD ((uint32_t)0x00000012) /*!< Alternate Function Open Drain Mode */
+
+#define GPIO_MODE_ANALOG ((uint32_t)0x00000003) /*!< Analog Mode */
+
+#define GPIO_MODE_IT_RISING ((uint32_t)0x10110000) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define GPIO_MODE_IT_FALLING ((uint32_t)0x10210000) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define GPIO_MODE_IT_RISING_FALLING ((uint32_t)0x10310000) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+
+#define GPIO_MODE_EVT_RISING ((uint32_t)0x10120000) /*!< External Event Mode with Rising edge trigger detection */
+#define GPIO_MODE_EVT_FALLING ((uint32_t)0x10220000) /*!< External Event Mode with Falling edge trigger detection */
+#define GPIO_MODE_EVT_RISING_FALLING ((uint32_t)0x10320000) /*!< External Event Mode with Rising/Falling edge trigger detection */
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_speed_define GPIO speed define
+ * @brief GPIO Output Maximum frequency
+ * @{
+ */
+#define GPIO_SPEED_LOW ((uint32_t)0x00000000) /*!< Low speed */
+#define GPIO_SPEED_MEDIUM ((uint32_t)0x00000001) /*!< Medium speed */
+#define GPIO_SPEED_FAST ((uint32_t)0x00000002) /*!< Fast speed */
+#define GPIO_SPEED_HIGH ((uint32_t)0x00000003) /*!< High speed */
+/**
+ * @}
+ */
+
+ /** @defgroup GPIO_pull_define GPIO pull define
+ * @brief GPIO Pull-Up or Pull-Down Activation
+ * @{
+ */
+#define GPIO_NOPULL ((uint32_t)0x00000000) /*!< No Pull-up or Pull-down activation */
+#define GPIO_PULLUP ((uint32_t)0x00000001) /*!< Pull-up activation */
+#define GPIO_PULLDOWN ((uint32_t)0x00000002) /*!< Pull-down activation */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Checks whether the specified EXTI line flag is set or not.
+ * @param __EXTI_LINE__: specifies the EXTI line flag to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clears the EXTI's line pending flags.
+ * @param __EXTI_LINE__: specifies the EXTI lines flags to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Checks whether the specified EXTI line is asserted or not.
+ * @param __EXTI_LINE__: specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clears the EXTI's line pending bits.
+ * @param __EXTI_LINE__: specifies the EXTI lines to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Generates a Software interrupt on selected EXTI line.
+ * @param __EXTI_LINE__: specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+/**
+ * @}
+ */
+
+/* Include GPIO HAL Extension module */
+#include "stm32f4xx_hal_gpio_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup GPIO_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup GPIO_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
+void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
+/**
+ * @}
+ */
+
+/** @addtogroup GPIO_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *****************************************************/
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup GPIO_Private_Constants GPIO Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup GPIO_Private_Macros GPIO Private Macros
+ * @{
+ */
+#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
+#define IS_GPIO_PIN(PIN) (((PIN) & GPIO_PIN_MASK ) != (uint32_t)0x00)
+#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\
+ ((MODE) == GPIO_MODE_OUTPUT_PP) ||\
+ ((MODE) == GPIO_MODE_OUTPUT_OD) ||\
+ ((MODE) == GPIO_MODE_AF_PP) ||\
+ ((MODE) == GPIO_MODE_AF_OD) ||\
+ ((MODE) == GPIO_MODE_IT_RISING) ||\
+ ((MODE) == GPIO_MODE_IT_FALLING) ||\
+ ((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\
+ ((MODE) == GPIO_MODE_EVT_RISING) ||\
+ ((MODE) == GPIO_MODE_EVT_FALLING) ||\
+ ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
+ ((MODE) == GPIO_MODE_ANALOG))
+#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_LOW) || ((SPEED) == GPIO_SPEED_MEDIUM) || \
+ ((SPEED) == GPIO_SPEED_FAST) || ((SPEED) == GPIO_SPEED_HIGH))
+#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
+ ((PULL) == GPIO_PULLDOWN))
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup GPIO_Private_Functions GPIO Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_GPIO_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_gpio_ex.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,1100 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_gpio_ex.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of GPIO HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_GPIO_EX_H
+#define __STM32F4xx_HAL_GPIO_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup GPIOEx GPIOEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Constants GPIO Exported Constants
+ * @{
+ */
+
+/** @defgroup GPIO_Alternate_function_selection GPIO Alternate Function Selection
+ * @{
+ */
+
+/*------------------------------------------ STM32F429xx/STM32F439xx --------------------------------------*/
+#if defined (STM32F429xx) || defined (STM32F439xx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */
+#define GPIO_AF5_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */
+#define GPIO_AF5_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */
+#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
+#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART7 Alternate Function mapping */
+#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_LTDC ((uint8_t)0x09) /* LCD-TFT Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0xA) /* OTG_HS Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FMC ((uint8_t)0xC) /* FMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xC) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */
+
+/**
+ * @brief AF 14 selection
+ */
+#define GPIO_AF14_LTDC ((uint8_t)0x0E) /* LCD-TFT Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F429xx || STM32F439xx */
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F427xx/STM32F437xx--------------------------------*/
+#if defined (STM32F427xx) || defined (STM32F437xx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */
+#define GPIO_AF5_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */
+#define GPIO_AF5_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */
+/** @brief GPIO_Legacy
+ */
+#define GPIO_AF5_I2S3ext GPIO_AF5_SPI3 /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */
+#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
+#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART7 Alternate Function mapping */
+#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0xA) /* OTG_HS Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FMC ((uint8_t)0xC) /* FMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xC) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F427xx || STM32F437xx */
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F407xx/STM32F417xx--------------------------------*/
+#if defined (STM32F407xx) || defined (STM32F417xx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0xA) /* OTG_HS Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FSMC ((uint8_t)0xC) /* FSMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xC) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F407xx || STM32F417xx */
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F405xx/STM32F415xx--------------------------------*/
+#if defined (STM32F405xx) || defined (STM32F415xx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0xA) /* OTG_HS Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FSMC ((uint8_t)0xC) /* FSMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xC) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F405xx || STM32F415xx */
+
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------------- STM32F401xx--------------------------------------*/
+#if defined(STM32F401xC) || defined(STM32F401xE)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */
+#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */
+
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F401xC || STM32F401xE */
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------------- STM32F411xx--------------------------------------*/
+#if defined(STM32F411xE)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_SPI4 ((uint8_t)0x06) /* SPI4/I2S4 Alternate Function mapping */
+#define GPIO_AF6_SPI5 ((uint8_t)0x06) /* SPI5/I2S5 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */
+#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */
+
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+#endif /* STM32F411xE */
+/*---------------------------------------- STM32F446xx -------------------------------------------*/
+#if defined (STM32F446xx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
+#define GPIO_AF3_CEC ((uint8_t)0x03) /* CEC Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
+#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04) /* FMPI2C1 Alternate Function mapping */
+#define GPIO_AF4_CEC ((uint8_t)0x04) /* CEC Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_SPI4 ((uint8_t)0x06) /* SPI4 Alternate Function mapping */
+#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_UART5 ((uint8_t)0x07) /* UART5 Alternate Function mapping */
+#define GPIO_AF7_SPI2 ((uint8_t)0x07) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF7_SPDIFRX ((uint8_t)0x07) /* SPDIFRX Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
+#define GPIO_AF8_SPDIFRX ((uint8_t)0x08) /* SPDIFRX Alternate Function mapping */
+#define GPIO_AF8_SAI2 ((uint8_t)0x08) /* SAI2 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_QSPI ((uint8_t)0x09) /* QSPI Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0xA) /* OTG_HS Alternate Function mapping */
+#define GPIO_AF10_SAI2 ((uint8_t)0xA) /* SAI2 Alternate Function mapping */
+#define GPIO_AF10_QSPI ((uint8_t)0xA) /* QSPI Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FMC ((uint8_t)0xC) /* FMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xC) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#endif /* STM32F446xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Macros GPIO Exported Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Functions GPIO Exported Functions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup GPIOEx_Private_Constants GPIO Private Constants
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup GPIOEx_Private_Macros GPIO Private Macros
+ * @{
+ */
+/** @defgroup GPIOEx_Get_Port_Index GPIO Get Port Index
+ * @{
+ */
+#if defined (STM32F405xx) || defined (STM32F415xx) || defined (STM32F407xx) || defined (STM32F417xx)
+#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U :\
+ ((__GPIOx__) == (GPIOE))? 4U :\
+ ((__GPIOx__) == (GPIOF))? 5U :\
+ ((__GPIOx__) == (GPIOG))? 6U :\
+ ((__GPIOx__) == (GPIOH))? 7U :\
+ ((__GPIOx__) == (GPIOI))? 8U : 9U)
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined (STM32F427xx) || defined (STM32F437xx) || defined (STM32F429xx) || defined (STM32F439xx)
+#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U :\
+ ((__GPIOx__) == (GPIOE))? 4U :\
+ ((__GPIOx__) == (GPIOF))? 5U :\
+ ((__GPIOx__) == (GPIOG))? 6U :\
+ ((__GPIOx__) == (GPIOH))? 7U :\
+ ((__GPIOx__) == (GPIOI))? 8U :\
+ ((__GPIOx__) == (GPIOJ))? 9U : 10U)
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined (STM32F401xC) || defined (STM32F401xE) || defined (STM32F411xE)
+#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U :\
+ ((__GPIOx__) == (GPIOE))? 4U : 5U)
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined (STM32F446xx)
+#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U :\
+ ((__GPIOx__) == (GPIOE))? 4U :\
+ ((__GPIOx__) == (GPIOF))? 5U :\
+ ((__GPIOx__) == (GPIOG))? 6U : 8U)
+#endif /* STM32F446xx */
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIOEx_IS_Alternat_function_selection GPIO Check Alternate Function
+ * @{
+ */
+/*------------------------- STM32F429xx/STM32F439xx---------------------------*/
+#if defined (STM32F429xx) || defined (STM32F439xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
+ ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
+ ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
+ ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \
+ ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
+ ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
+ ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1) || \
+ ((AF) == GPIO_AF14_LTDC))
+
+#endif /* STM32F429xx || STM32F439xx */
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F427xx/STM32F437xx--------------------------------*/
+#if defined (STM32F427xx) || defined (STM32F437xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
+ ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
+ ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
+ ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \
+ ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
+ ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
+ ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1))
+
+#endif /* STM32F427xx || STM32F437xx */
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F407xx/STM32F417xx--------------------------------*/
+#if defined (STM32F407xx) || defined (STM32F417xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
+ ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
+ ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
+ ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \
+ ((AF) == GPIO_AF12_FSMC) || ((AF) == GPIO_AF15_EVENTOUT))
+
+#endif /* STM32F407xx || STM32F417xx */
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F405xx/STM32F415xx--------------------------------*/
+#if defined (STM32F405xx) || defined (STM32F415xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
+ ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
+ ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
+ ((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDIO) || \
+ ((AF) == GPIO_AF12_FSMC) || ((AF) == GPIO_AF15_EVENTOUT))
+
+#endif /* STM32F405xx || STM32F415xx */
+
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------------- STM32F401xx--------------------------------------*/
+#if defined(STM32F401xC) || defined(STM32F401xE)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF4_I2C1) || \
+ ((AF) == GPIO_AF4_I2C2) || ((AF) == GPIO_AF4_I2C3) || \
+ ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF8_USART6) || ((AF) == GPIO_AF10_OTG_FS) || \
+ ((AF) == GPIO_AF9_I2C2) || ((AF) == GPIO_AF9_I2C3) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF15_EVENTOUT))
+
+#endif /* STM32F401xC || STM32F401xE */
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------------- STM32F411xx--------------------------------------*/
+#if defined(STM32F411xE)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF4_I2C1) || \
+ ((AF) == GPIO_AF4_I2C2) || ((AF) == GPIO_AF4_I2C3) || \
+ ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
+ ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF6_SPI4) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF6_SPI5) || ((AF) == GPIO_AF7_SPI3) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF8_USART6) || ((AF) == GPIO_AF10_OTG_FS) || \
+ ((AF) == GPIO_AF9_I2C2) || ((AF) == GPIO_AF9_I2C3) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF15_EVENTOUT))
+
+#endif /* STM32F411xE */
+/*----------------------------------------------------------------------------------------------------*/
+
+/*----------------------------------------------- STM32F446xx ----------------------------------------*/
+#if defined(STM32F446xx)
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
+ ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
+ ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
+ ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \
+ ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1) || \
+ ((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \
+ ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF6_SPI2) || \
+ ((AF) == GPIO_AF6_SPI4) || ((AF) == GPIO_AF7_UART5) || \
+ ((AF) == GPIO_AF7_SPI2) || ((AF) == GPIO_AF7_SPI3) || \
+ ((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \
+ ((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF9_QSPI) || \
+ ((AF) == GPIO_AF10_SAI2) || ((AF) == GPIO_AF10_QSPI))
+
+#endif /* STM32F446xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup GPIOEx_Private_Functions GPIO Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_GPIO_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_hash.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,448 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_hash.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of HASH HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_HASH_H
+#define __STM32F4xx_HAL_HASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F415xx) || defined(STM32F417xx) || defined(STM32F437xx) || defined(STM32F439xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HASH
+ * @brief HASH HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup HASH_Exported_Types HASH Exported Types
+ * @{
+ */
+
+/** @defgroup HASH_Exported_Types_Group1 HASH Configuration Structure definition
+ * @{
+ */
+
+typedef struct
+{
+ uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string.
+ This parameter can be a value of @ref HASH DataType */
+
+ uint32_t KeySize; /*!< The key size is used only in HMAC operation */
+
+ uint8_t* pKey; /*!< The key is used only in HMAC operation */
+}HASH_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Types_Group2 HASH State structures definition
+ * @{
+ */
+
+typedef enum
+{
+ HAL_HASH_STATE_RESET = 0x00, /*!< HASH not yet initialized or disabled */
+ HAL_HASH_STATE_READY = 0x01, /*!< HASH initialized and ready for use */
+ HAL_HASH_STATE_BUSY = 0x02, /*!< HASH internal process is ongoing */
+ HAL_HASH_STATE_TIMEOUT = 0x03, /*!< HASH timeout state */
+ HAL_HASH_STATE_ERROR = 0x04 /*!< HASH error state */
+}HAL_HASH_STATETypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Types_Group3 HASH phase structures definition
+ * @{
+ */
+
+typedef enum
+{
+ HAL_HASH_PHASE_READY = 0x01, /*!< HASH peripheral is ready for initialization */
+ HAL_HASH_PHASE_PROCESS = 0x02, /*!< HASH peripheral is in processing phase */
+}HAL_HASHPhaseTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Types_Group4 HASH Handle structures definition
+ * @{
+ */
+
+typedef struct
+{
+ HASH_InitTypeDef Init; /*!< HASH required parameters */
+
+ uint8_t *pHashInBuffPtr; /*!< Pointer to input buffer */
+
+ uint8_t *pHashOutBuffPtr; /*!< Pointer to input buffer */
+
+ __IO uint32_t HashBuffSize; /*!< Size of buffer to be processed */
+
+ __IO uint32_t HashInCount; /*!< Counter of inputed data */
+
+ __IO uint32_t HashITCounter; /*!< Counter of issued interrupts */
+
+ HAL_StatusTypeDef Status; /*!< HASH peripheral status */
+
+ HAL_HASHPhaseTypeDef Phase; /*!< HASH peripheral phase */
+
+ DMA_HandleTypeDef *hdmain; /*!< HASH In DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< HASH locking object */
+
+ __IO HAL_HASH_STATETypeDef State; /*!< HASH peripheral state */
+} HASH_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup HASH_Exported_Constants HASH Exported Constants
+ * @{
+ */
+
+/** @defgroup HASH_Exported_Constants_Group1 HASH Algorithm Selection
+ * @{
+ */
+#define HASH_ALGOSELECTION_SHA1 ((uint32_t)0x0000) /*!< HASH function is SHA1 */
+#define HASH_ALGOSELECTION_SHA224 HASH_CR_ALGO_1 /*!< HASH function is SHA224 */
+#define HASH_ALGOSELECTION_SHA256 HASH_CR_ALGO /*!< HASH function is SHA256 */
+#define HASH_ALGOSELECTION_MD5 HASH_CR_ALGO_0 /*!< HASH function is MD5 */
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Constants_Group2 HASH Algorithm Mode
+ * @{
+ */
+#define HASH_ALGOMODE_HASH ((uint32_t)0x00000000) /*!< Algorithm is HASH */
+#define HASH_ALGOMODE_HMAC HASH_CR_MODE /*!< Algorithm is HMAC */
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Constants_Group3 HASH DataType
+ * @{
+ */
+#define HASH_DATATYPE_32B ((uint32_t)0x0000) /*!< 32-bit data. No swapping */
+#define HASH_DATATYPE_16B HASH_CR_DATATYPE_0 /*!< 16-bit data. Each half word is swapped */
+#define HASH_DATATYPE_8B HASH_CR_DATATYPE_1 /*!< 8-bit data. All bytes are swapped */
+#define HASH_DATATYPE_1B HASH_CR_DATATYPE /*!< 1-bit data. In the word all bits are swapped */
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Constants_Group4 HASH HMAC Long key
+ * @brief HASH HMAC Long key used only for HMAC mode
+ * @{
+ */
+#define HASH_HMAC_KEYTYPE_SHORTKEY ((uint32_t)0x00000000) /*!< HMAC Key is <= 64 bytes */
+#define HASH_HMAC_KEYTYPE_LONGKEY HASH_CR_LKEY /*!< HMAC Key is > 64 bytes */
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Constants_Group5 HASH Flags definition
+ * @{
+ */
+#define HASH_FLAG_DINIS HASH_SR_DINIS /*!< 16 locations are free in the DIN : A new block can be entered into the input buffer */
+#define HASH_FLAG_DCIS HASH_SR_DCIS /*!< Digest calculation complete */
+#define HASH_FLAG_DMAS HASH_SR_DMAS /*!< DMA interface is enabled (DMAE=1) or a transfer is ongoing */
+#define HASH_FLAG_BUSY HASH_SR_BUSY /*!< The hash core is Busy : processing a block of data */
+#define HASH_FLAG_DINNE HASH_CR_DINNE /*!< DIN not empty : The input buffer contains at least one word of data */
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Exported_Constants_Group6 HASH Interrupts definition
+ * @{
+ */
+#define HASH_IT_DINI HASH_IMR_DINIM /*!< A new block can be entered into the input buffer (DIN) */
+#define HASH_IT_DCI HASH_IMR_DCIM /*!< Digest calculation complete */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup HASH_Exported_Macros HASH Exported Macros
+ * @{
+ */
+
+/** @brief Reset HASH handle state
+ * @param __HANDLE__: specifies the HASH handle.
+ * @retval None
+ */
+#define __HAL_HASH_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_HASH_STATE_RESET)
+
+/** @brief Check whether the specified HASH flag is set or not.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg HASH_FLAG_DINIS: A new block can be entered into the input buffer.
+ * @arg HASH_FLAG_DCIS: Digest calculation complete
+ * @arg HASH_FLAG_DMAS: DMA interface is enabled (DMAE=1) or a transfer is ongoing
+ * @arg HASH_FLAG_BUSY: The hash core is Busy : processing a block of data
+ * @arg HASH_FLAG_DINNE: DIN not empty : The input buffer contains at least one word of data
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_HASH_GET_FLAG(__FLAG__) ((HASH->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Enable the multiple DMA mode.
+ * This feature is available only in STM32F429x and STM32F439x devices.
+ * @retval None
+ */
+#define __HAL_HASH_SET_MDMAT() HASH->CR |= HASH_CR_MDMAT
+
+/**
+ * @brief Disable the multiple DMA mode.
+ * @retval None
+ */
+#define __HAL_HASH_RESET_MDMAT() HASH->CR &= (uint32_t)(~HASH_CR_MDMAT)
+
+/**
+ * @brief Start the digest computation
+ * @retval None
+ */
+#define __HAL_HASH_START_DIGEST() HASH->STR |= HASH_STR_DCAL
+
+/**
+ * @brief Set the number of valid bits in last word written in Data register
+ * @param SIZE: size in byte of last data written in Data register.
+ * @retval None
+*/
+#define __HAL_HASH_SET_NBVALIDBITS(SIZE) do{HASH->STR &= ~(HASH_STR_NBW);\
+ HASH->STR |= 8 * ((SIZE) % 4);\
+ }while(0)
+
+/**
+ * @}
+ */
+
+/* Include HASH HAL Extension module */
+#include "stm32f4xx_hal_hash_ex.h"
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup HASH_Exported_Functions HASH Exported Functions
+ * @{
+ */
+
+/** @addtogroup HASH_Exported_Functions_Group1
+ * @{
+ */
+HAL_StatusTypeDef HAL_HASH_Init(HASH_HandleTypeDef *hhash);
+HAL_StatusTypeDef HAL_HASH_DeInit(HASH_HandleTypeDef *hhash);
+/**
+ * @}
+ */
+
+/** @addtogroup HASH_Exported_Functions_Group2
+ * @{
+ */
+HAL_StatusTypeDef HAL_HASH_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASH_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASH_MD5_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASH_SHA1_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+/**
+ * @}
+ */
+
+/** @addtogroup HASH_Exported_Functions_Group3
+ * @{
+ */
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HMAC_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/** @addtogroup HASH_Exported_Functions_Group4
+ * @{
+ */
+HAL_StatusTypeDef HAL_HASH_SHA1_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+HAL_StatusTypeDef HAL_HASH_MD5_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+/**
+ * @}
+ */
+
+/** @addtogroup HASH_Exported_Functions_Group5
+ * @{
+ */
+HAL_StatusTypeDef HAL_HASH_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASH_SHA1_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASH_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASH_MD5_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/** @addtogroup HASH_Exported_Functions_Group6
+ * @{
+ */
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HMAC_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+/**
+ * @}
+ */
+
+/** @addtogroup HASH_Exported_Functions_Group7
+ * @{
+ */
+void HAL_HASH_IRQHandler(HASH_HandleTypeDef *hhash);
+/**
+ * @}
+ */
+
+/** @addtogroup HASH_Exported_Functions_Group8
+ * @{
+ */
+HAL_HASH_STATETypeDef HAL_HASH_GetState(HASH_HandleTypeDef *hhash);
+void HAL_HASH_MspInit(HASH_HandleTypeDef *hhash);
+void HAL_HASH_MspDeInit(HASH_HandleTypeDef *hhash);
+void HAL_HASH_InCpltCallback(HASH_HandleTypeDef *hhash);
+void HAL_HASH_DgstCpltCallback(HASH_HandleTypeDef *hhash);
+void HAL_HASH_ErrorCallback(HASH_HandleTypeDef *hhash);
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+ /* Private types -------------------------------------------------------------*/
+/** @defgroup HASH_Private_Types HASH Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup HASH_Private_Variables HASH Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup HASH_Private_Constants HASH Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup HASH_Private_Macros HASH Private Macros
+ * @{
+ */
+#define IS_HASH_ALGOSELECTION(__ALGOSELECTION__) (((__ALGOSELECTION__) == HASH_ALGOSELECTION_SHA1) || \
+ ((__ALGOSELECTION__) == HASH_ALGOSELECTION_SHA224) || \
+ ((__ALGOSELECTION__) == HASH_ALGOSELECTION_SHA256) || \
+ ((__ALGOSELECTION__) == HASH_ALGOSELECTION_MD5))
+
+
+#define IS_HASH_ALGOMODE(__ALGOMODE__) (((__ALGOMODE__) == HASH_ALGOMODE_HASH) || \
+ ((__ALGOMODE__) == HASH_ALGOMODE_HMAC))
+
+
+#define IS_HASH_DATATYPE(__DATATYPE__) (((__DATATYPE__) == HASH_DATATYPE_32B)|| \
+ ((__DATATYPE__) == HASH_DATATYPE_16B)|| \
+ ((__DATATYPE__) == HASH_DATATYPE_8B) || \
+ ((__DATATYPE__) == HASH_DATATYPE_1B))
+
+
+#define IS_HASH_HMAC_KEYTYPE(__KEYTYPE__) (((__KEYTYPE__) == HASH_HMAC_KEYTYPE_SHORTKEY) || \
+ ((__KEYTYPE__) == HASH_HMAC_KEYTYPE_LONGKEY))
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup HASH_Private_Functions HASH Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F415xx || STM32F417xx || STM32F437xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_HASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_hash_ex.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,200 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_hash_ex.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of HASH HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_HASH_EX_H
+#define __STM32F4xx_HAL_HASH_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F437xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HASHEx
+ * @brief HASHEx HAL Extension module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup HASHEx_Exported_Functions HASHEx Exported Functions
+ * @{
+ */
+
+/** @defgroup HASHEx_Exported_Functions_Group1 HASHEx processing using polling functions
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+
+/**
+ * @}
+ */
+
+/** @defgroup HASHEx_Exported_Functions_Group2 HMAC processing using polling functions
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+
+/**
+ * @}
+ */
+
+/** @defgroup HASHEx_Exported_Functions_Group3 HASHEx processing using functions
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+
+/**
+ * @}
+ */
+
+/** @defgroup HASHEx_Exported_Functions_Group4 HASHEx processing using DMA
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+
+/**
+ * @}
+ */
+
+/** @defgroup HASHEx_Exported_Functions_Group5 HMAC processing using DMA
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+/**
+ * @}
+ */
+
+/** @defgroup HASHEx_Exported_Functions_Group6 HASHEx processing functions
+ * @{
+ */
+
+void HAL_HASHEx_IRQHandler(HASH_HandleTypeDef *hhash);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+ /* Private types -------------------------------------------------------------*/
+/** @defgroup HASHEx_Private_Types HASHEx Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup HASHEx_Private_Variables HASHEx Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup HASHEx_Private_Constants HASHEx Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup HASHEx_Private_Macros HASHEx Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup HASHEx_Private_Functions HASHEx Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F437xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_HASH_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_hcd.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,282 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_hcd.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of HCD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_HCD_H
+#define __STM32F4xx_HAL_HCD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_usb.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup HCD HCD
+ * @brief HCD HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup HCD_Exported_Types HCD Exported Types
+ * @{
+ */
+
+/** @defgroup HCD_Exported_Types_Group1 HCD State Structure definition
+ * @{
+ */
+typedef enum
+{
+ HAL_HCD_STATE_RESET = 0x00,
+ HAL_HCD_STATE_READY = 0x01,
+ HAL_HCD_STATE_ERROR = 0x02,
+ HAL_HCD_STATE_BUSY = 0x03,
+ HAL_HCD_STATE_TIMEOUT = 0x04
+} HCD_StateTypeDef;
+
+typedef USB_OTG_GlobalTypeDef HCD_TypeDef;
+typedef USB_OTG_CfgTypeDef HCD_InitTypeDef;
+typedef USB_OTG_HCTypeDef HCD_HCTypeDef ;
+typedef USB_OTG_URBStateTypeDef HCD_URBStateTypeDef ;
+typedef USB_OTG_HCStateTypeDef HCD_HCStateTypeDef ;
+/**
+ * @}
+ */
+
+/** @defgroup HCD_Exported_Types_Group2 HCD Handle Structure definition
+ * @{
+ */
+typedef struct
+{
+ HCD_TypeDef *Instance; /*!< Register base address */
+ HCD_InitTypeDef Init; /*!< HCD required parameters */
+ HCD_HCTypeDef hc[15]; /*!< Host channels parameters */
+ HAL_LockTypeDef Lock; /*!< HCD peripheral status */
+ __IO HCD_StateTypeDef State; /*!< HCD communication state */
+ void *pData; /*!< Pointer Stack Handler */
+} HCD_HandleTypeDef;
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup HCD_Exported_Constants HCD Exported Constants
+ * @{
+ */
+/** @defgroup HCD_Speed HCD Speed
+ * @{
+ */
+#define HCD_SPEED_HIGH 0
+#define HCD_SPEED_LOW 2
+#define HCD_SPEED_FULL 3
+/**
+ * @}
+ */
+
+/** @defgroup HCD_PHY_Module HCD PHY Module
+ * @{
+ */
+#define HCD_PHY_ULPI 1
+#define HCD_PHY_EMBEDDED 2
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup HCD_Exported_Macros HCD Exported Macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+#define __HAL_HCD_ENABLE(__HANDLE__) USB_EnableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_HCD_DISABLE(__HANDLE__) USB_DisableGlobalInt ((__HANDLE__)->Instance)
+
+#define __HAL_HCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_HCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__))
+#define __HAL_HCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0)
+
+#define __HAL_HCD_CLEAR_HC_INT(chnum, __INTERRUPT__) (USBx_HC(chnum)->HCINT = (__INTERRUPT__))
+#define __HAL_HCD_MASK_HALT_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_CHHM)
+#define __HAL_HCD_UNMASK_HALT_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_CHHM)
+#define __HAL_HCD_MASK_ACK_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_ACKM)
+#define __HAL_HCD_UNMASK_ACK_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_ACKM)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup HCD_Exported_Functions HCD Exported Functions
+ * @{
+ */
+
+/** @defgroup HCD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_HCD_Init(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_DeInit(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd,
+ uint8_t ch_num,
+ uint8_t epnum,
+ uint8_t dev_address,
+ uint8_t speed,
+ uint8_t ep_type,
+ uint16_t mps);
+
+HAL_StatusTypeDef HAL_HCD_HC_Halt(HCD_HandleTypeDef *hhcd, uint8_t ch_num);
+void HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd);
+/**
+ * @}
+ */
+
+/** @defgroup HCD_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd,
+ uint8_t pipe,
+ uint8_t direction,
+ uint8_t ep_type,
+ uint8_t token,
+ uint8_t* pbuff,
+ uint16_t length,
+ uint8_t do_ping);
+
+/* Non-Blocking mode: Interrupt */
+void HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd,
+ uint8_t chnum,
+ HCD_URBStateTypeDef urb_state);
+/**
+ * @}
+ */
+
+/** @defgroup HCD_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_HCD_ResetPort(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_Start(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_Stop(HCD_HandleTypeDef *hhcd);
+/**
+ * @}
+ */
+
+/** @defgroup HCD_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+HCD_StateTypeDef HAL_HCD_GetState(HCD_HandleTypeDef *hhcd);
+HCD_URBStateTypeDef HAL_HCD_HC_GetURBState(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+uint32_t HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+HCD_HCStateTypeDef HAL_HCD_HC_GetState(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+uint32_t HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd);
+uint32_t HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup HCD_Private_Macros HCD Private Macros
+ * @{
+ */
+/** @defgroup HCD_Instance_definition HCD Instance definition
+ * @{
+ */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) ||\
+ defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+ #define IS_HCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS) || \
+ ((INSTANCE) == USB_OTG_HS))
+#elif defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+ #define IS_HCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS))
+#endif
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup HCD_Private_Functions_Prototypes HCD Private Functions Prototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup HCD_Private_Functions HCD Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_HCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_i2c.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,535 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2c.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of I2C HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_I2C_H
+#define __STM32F4xx_HAL_I2C_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2C
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2C_Exported_Types I2C Exported Types
+ * @{
+ */
+
+/**
+ * @brief I2C Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockSpeed; /*!< Specifies the clock frequency.
+ This parameter must be set to a value lower than 400kHz */
+
+ uint32_t DutyCycle; /*!< Specifies the I2C fast mode duty cycle.
+ This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */
+
+ uint32_t OwnAddress1; /*!< Specifies the first device own address.
+ This parameter can be a 7-bit or 10-bit address. */
+
+ uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
+ This parameter can be a value of @ref I2C_addressing_mode */
+
+ uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
+ This parameter can be a value of @ref I2C_dual_addressing_mode */
+
+ uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
+ This parameter can be a 7-bit address. */
+
+ uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
+ This parameter can be a value of @ref I2C_general_call_addressing_mode */
+
+ uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
+ This parameter can be a value of @ref I2C_nostretch_mode */
+
+}I2C_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_I2C_STATE_RESET = 0x00, /*!< I2C not yet initialized or disabled */
+ HAL_I2C_STATE_READY = 0x01, /*!< I2C initialized and ready for use */
+ HAL_I2C_STATE_BUSY = 0x02, /*!< I2C internal process is ongoing */
+ HAL_I2C_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_I2C_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_I2C_STATE_MEM_BUSY_TX = 0x32, /*!< Memory Data Transmission process is ongoing */
+ HAL_I2C_STATE_MEM_BUSY_RX = 0x42, /*!< Memory Data Reception process is ongoing */
+ HAL_I2C_STATE_TIMEOUT = 0x03, /*!< I2C timeout state */
+ HAL_I2C_STATE_ERROR = 0x04 /*!< I2C error state */
+
+}HAL_I2C_StateTypeDef;
+
+/**
+ * @brief I2C handle Structure definition
+ */
+typedef struct
+{
+ I2C_TypeDef *Instance; /*!< I2C registers base address */
+
+ I2C_InitTypeDef Init; /*!< I2C communication parameters */
+
+ uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */
+
+ uint16_t XferSize; /*!< I2C transfer size */
+
+ __IO uint16_t XferCount; /*!< I2C transfer counter */
+
+ DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< I2C locking object */
+
+ __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */
+
+ __IO uint32_t ErrorCode; /*!< I2C Error code */
+
+}I2C_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup I2C_Exported_Constants I2C Exported Constants
+ * @{
+ */
+
+/** @defgroup I2C_Error_Code I2C Error Code
+ * @brief I2C Error Code
+ * @{
+ */
+#define HAL_I2C_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_I2C_ERROR_BERR ((uint32_t)0x00000001) /*!< BERR error */
+#define HAL_I2C_ERROR_ARLO ((uint32_t)0x00000002) /*!< ARLO error */
+#define HAL_I2C_ERROR_AF ((uint32_t)0x00000004) /*!< AF error */
+#define HAL_I2C_ERROR_OVR ((uint32_t)0x00000008) /*!< OVR error */
+#define HAL_I2C_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+#define HAL_I2C_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout Error */
+/**
+ * @}
+ */
+
+/** @defgroup I2C_duty_cycle_in_fast_mode I2C duty cycle in fast mode
+ * @{
+ */
+#define I2C_DUTYCYCLE_2 ((uint32_t)0x00000000)
+#define I2C_DUTYCYCLE_16_9 I2C_CCR_DUTY
+/**
+ * @}
+ */
+
+/** @defgroup I2C_addressing_mode I2C addressing mode
+ * @{
+ */
+#define I2C_ADDRESSINGMODE_7BIT ((uint32_t)0x00004000)
+#define I2C_ADDRESSINGMODE_10BIT (I2C_OAR1_ADDMODE | ((uint32_t)0x00004000))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_dual_addressing_mode I2C dual addressing mode
+ * @{
+ */
+#define I2C_DUALADDRESS_DISABLE ((uint32_t)0x00000000)
+#define I2C_DUALADDRESS_ENABLE I2C_OAR2_ENDUAL
+/**
+ * @}
+ */
+
+/** @defgroup I2C_general_call_addressing_mode I2C general call addressing mode
+ * @{
+ */
+#define I2C_GENERALCALL_DISABLE ((uint32_t)0x00000000)
+#define I2C_GENERALCALL_ENABLE I2C_CR1_ENGC
+/**
+ * @}
+ */
+
+/** @defgroup I2C_nostretch_mode I2C nostretch mode
+ * @{
+ */
+#define I2C_NOSTRETCH_DISABLE ((uint32_t)0x00000000)
+#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Memory_Address_Size I2C Memory Address Size
+ * @{
+ */
+#define I2C_MEMADD_SIZE_8BIT ((uint32_t)0x00000001)
+#define I2C_MEMADD_SIZE_16BIT ((uint32_t)0x00000010)
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition
+ * @{
+ */
+#define I2C_IT_BUF I2C_CR2_ITBUFEN
+#define I2C_IT_EVT I2C_CR2_ITEVTEN
+#define I2C_IT_ERR I2C_CR2_ITERREN
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Flag_definition I2C Flag definition
+ * @{
+ */
+#define I2C_FLAG_SMBALERT ((uint32_t)0x00018000)
+#define I2C_FLAG_TIMEOUT ((uint32_t)0x00014000)
+#define I2C_FLAG_PECERR ((uint32_t)0x00011000)
+#define I2C_FLAG_OVR ((uint32_t)0x00010800)
+#define I2C_FLAG_AF ((uint32_t)0x00010400)
+#define I2C_FLAG_ARLO ((uint32_t)0x00010200)
+#define I2C_FLAG_BERR ((uint32_t)0x00010100)
+#define I2C_FLAG_TXE ((uint32_t)0x00010080)
+#define I2C_FLAG_RXNE ((uint32_t)0x00010040)
+#define I2C_FLAG_STOPF ((uint32_t)0x00010010)
+#define I2C_FLAG_ADD10 ((uint32_t)0x00010008)
+#define I2C_FLAG_BTF ((uint32_t)0x00010004)
+#define I2C_FLAG_ADDR ((uint32_t)0x00010002)
+#define I2C_FLAG_SB ((uint32_t)0x00010001)
+#define I2C_FLAG_DUALF ((uint32_t)0x00100080)
+#define I2C_FLAG_SMBHOST ((uint32_t)0x00100040)
+#define I2C_FLAG_SMBDEFAULT ((uint32_t)0x00100020)
+#define I2C_FLAG_GENCALL ((uint32_t)0x00100010)
+#define I2C_FLAG_TRA ((uint32_t)0x00100004)
+#define I2C_FLAG_BUSY ((uint32_t)0x00100002)
+#define I2C_FLAG_MSL ((uint32_t)0x00100001)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup I2C_Exported_Macros I2C Exported Macros
+ * @{
+ */
+
+/** @brief Reset I2C handle state
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @retval None
+ */
+#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
+
+/** @brief Enable or disable the specified I2C interrupts.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg I2C_IT_BUF: Buffer interrupt enable
+ * @arg I2C_IT_EVT: Event interrupt enable
+ * @arg I2C_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__)))
+
+/** @brief Checks if the specified I2C interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __INTERRUPT__: specifies the I2C interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2C_IT_BUF: Buffer interrupt enable
+ * @arg I2C_IT_EVT: Event interrupt enable
+ * @arg I2C_IT_ERR: Error interrupt enable
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified I2C flag is set or not.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2C_FLAG_SMBALERT: SMBus Alert flag
+ * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag
+ * @arg I2C_FLAG_PECERR: PEC error in reception flag
+ * @arg I2C_FLAG_OVR: Overrun/Underrun flag
+ * @arg I2C_FLAG_AF: Acknowledge failure flag
+ * @arg I2C_FLAG_ARLO: Arbitration lost flag
+ * @arg I2C_FLAG_BERR: Bus error flag
+ * @arg I2C_FLAG_TXE: Data register empty flag
+ * @arg I2C_FLAG_RXNE: Data register not empty flag
+ * @arg I2C_FLAG_STOPF: Stop detection flag
+ * @arg I2C_FLAG_ADD10: 10-bit header sent flag
+ * @arg I2C_FLAG_BTF: Byte transfer finished flag
+ * @arg I2C_FLAG_ADDR: Address sent flag
+ * Address matched flag
+ * @arg I2C_FLAG_SB: Start bit flag
+ * @arg I2C_FLAG_DUALF: Dual flag
+ * @arg I2C_FLAG_SMBHOST: SMBus host header
+ * @arg I2C_FLAG_SMBDEFAULT: SMBus default header
+ * @arg I2C_FLAG_GENCALL: General call header flag
+ * @arg I2C_FLAG_TRA: Transmitter/Receiver flag
+ * @arg I2C_FLAG_BUSY: Bus busy flag
+ * @arg I2C_FLAG_MSL: Master/Slave flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 16)) == 0x01)?((((__HANDLE__)->Instance->SR1) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)): \
+ ((((__HANDLE__)->Instance->SR2) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)))
+
+/** @brief Clears the I2C pending flags which are cleared by writing 0 in a specific bit.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg I2C_FLAG_SMBALERT: SMBus Alert flag
+ * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag
+ * @arg I2C_FLAG_PECERR: PEC error in reception flag
+ * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode)
+ * @arg I2C_FLAG_AF: Acknowledge failure flag
+ * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode)
+ * @arg I2C_FLAG_BERR: Bus error flag
+ * @retval None
+ */
+#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR1 = ~((__FLAG__) & I2C_FLAG_MASK))
+
+/** @brief Clears the I2C ADDR pending flag.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @retval None
+ */
+#define __HAL_I2C_CLEAR_ADDRFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg; \
+ tmpreg = (__HANDLE__)->Instance->SR1; \
+ tmpreg = (__HANDLE__)->Instance->SR2; \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Clears the I2C STOPF pending flag.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @retval None
+ */
+#define __HAL_I2C_CLEAR_STOPFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg; \
+ tmpreg = (__HANDLE__)->Instance->SR1; \
+ (__HANDLE__)->Instance->CR1 |= I2C_CR1_PE; \
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_I2C_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= I2C_CR1_PE)
+#define __HAL_I2C_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~I2C_CR1_PE)
+
+/**
+ * @}
+ */
+
+/* Include I2C HAL Extension module */
+#include "stm32f4xx_hal_i2c_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2C_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DeInit (I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions *****************************************************/
+/******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+
+/******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+/******* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control and State functions **************************************/
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
+uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Constants I2C Private Constants
+ * @{
+ */
+#define I2C_FLAG_MASK ((uint32_t)0x0000FFFF)
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2C_Private_Macros I2C Private Macros
+ * @{
+ */
+
+#define I2C_FREQRANGE(__PCLK__) ((__PCLK__)/1000000)
+#define I2C_RISE_TIME(__FREQRANGE__, __SPEED__) (((__SPEED__) <= 100000) ? ((__FREQRANGE__) + 1) : ((((__FREQRANGE__) * 300) / 1000) + 1))
+#define I2C_SPEED_STANDARD(__PCLK__, __SPEED__) (((((__PCLK__)/((__SPEED__) << 1)) & I2C_CCR_CCR) < 4)? 4:((__PCLK__) / ((__SPEED__) << 1)))
+#define I2C_SPEED_FAST(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__DUTYCYCLE__) == I2C_DUTYCYCLE_2)? ((__PCLK__) / ((__SPEED__) * 3)) : (((__PCLK__) / ((__SPEED__) * 25)) | I2C_DUTYCYCLE_16_9))
+#define I2C_SPEED(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__SPEED__) <= 100000)? (I2C_SPEED_STANDARD((__PCLK__), (__SPEED__))) : \
+ ((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__)) & I2C_CCR_CCR) == 0)? 1 : \
+ ((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__))) | I2C_CCR_FS))
+
+#define I2C_7BIT_ADD_WRITE(__ADDRESS__) ((uint8_t)((__ADDRESS__) & (~I2C_OAR1_ADD0)))
+#define I2C_7BIT_ADD_READ(__ADDRESS__) ((uint8_t)((__ADDRESS__) | I2C_OAR1_ADD0))
+
+#define I2C_10BIT_ADDRESS(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FF))))
+#define I2C_10BIT_HEADER_WRITE(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300))) >> 7) | (uint16_t)(0xF0))))
+#define I2C_10BIT_HEADER_READ(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300))) >> 7) | (uint16_t)(0xF1))))
+
+#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00))) >> 8)))
+#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FF))))
+
+/** @defgroup I2C_IS_RTC_Definitions I2C Private macros to check input parameters
+ * @{
+ */
+#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DUTYCYCLE_2) || \
+ ((CYCLE) == I2C_DUTYCYCLE_16_9))
+#define IS_I2C_ADDRESSING_MODE(ADDRESS) (((ADDRESS) == I2C_ADDRESSINGMODE_7BIT) || \
+ ((ADDRESS) == I2C_ADDRESSINGMODE_10BIT))
+#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \
+ ((ADDRESS) == I2C_DUALADDRESS_ENABLE))
+#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \
+ ((CALL) == I2C_GENERALCALL_ENABLE))
+#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \
+ ((STRETCH) == I2C_NOSTRETCH_ENABLE))
+#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
+ ((SIZE) == I2C_MEMADD_SIZE_16BIT))
+#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) > 0) && ((SPEED) <= 400000))
+#define IS_I2C_OWN_ADDRESS1(ADDRESS1) (((ADDRESS1) & (uint32_t)(0xFFFFFC00)) == 0)
+#define IS_I2C_OWN_ADDRESS2(ADDRESS2) (((ADDRESS2) & (uint32_t)(0xFFFFFF01)) == 0)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup I2C_Private_Functions I2C Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_I2C_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_i2c_ex.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,136 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2c_ex.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of I2C HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_I2C_EX_H
+#define __STM32F4xx_HAL_I2C_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2CEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup I2CEx_Exported_Constants I2C Exported Constants
+ * @{
+ */
+
+/** @defgroup I2CEx_Analog_Filter I2C Analog Filter
+ * @{
+ */
+#define I2C_ANALOGFILTER_ENABLE ((uint32_t)0x00000000)
+#define I2C_ANALOGFILTER_DISABLE I2C_FLTR_ANOFF
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2CEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup I2CEx_Exported_Functions_Group1
+ * @{
+ */
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter);
+HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Constants I2C Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2CEx_Private_Macros I2C Private Macros
+ * @{
+ */
+#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \
+ ((FILTER) == I2C_ANALOGFILTER_DISABLE))
+#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F427xx || STM32F429xx || STM32F437xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_I2C_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_i2s.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,511 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2s.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of I2S HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_I2S_H
+#define __STM32F4xx_HAL_I2S_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2S
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2S_Exported_Types I2S Exported Types
+ * @{
+ */
+
+/**
+ * @brief I2S Init structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Specifies the I2S operating mode.
+ This parameter can be a value of @ref I2S_Mode */
+
+ uint32_t Standard; /*!< Specifies the standard used for the I2S communication.
+ This parameter can be a value of @ref I2S_Standard */
+
+ uint32_t DataFormat; /*!< Specifies the data format for the I2S communication.
+ This parameter can be a value of @ref I2S_Data_Format */
+
+ uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not.
+ This parameter can be a value of @ref I2S_MCLK_Output */
+
+ uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication.
+ This parameter can be a value of @ref I2S_Audio_Frequency */
+
+ uint32_t CPOL; /*!< Specifies the idle state of the I2S clock.
+ This parameter can be a value of @ref I2S_Clock_Polarity */
+
+ uint32_t ClockSource; /*!< Specifies the I2S Clock Source.
+ This parameter can be a value of @ref I2S_Clock_Source */
+
+ uint32_t FullDuplexMode; /*!< Specifies the I2S FullDuplex mode.
+ This parameter can be a value of @ref I2S_FullDuplex_Mode */
+
+}I2S_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_I2S_STATE_RESET = 0x00, /*!< I2S not yet initialized or disabled */
+ HAL_I2S_STATE_READY = 0x01, /*!< I2S initialized and ready for use */
+ HAL_I2S_STATE_BUSY = 0x02, /*!< I2S internal process is ongoing */
+ HAL_I2S_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_I2S_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_I2S_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_I2S_STATE_TIMEOUT = 0x03, /*!< I2S timeout state */
+ HAL_I2S_STATE_ERROR = 0x04 /*!< I2S error state */
+
+}HAL_I2S_StateTypeDef;
+
+/**
+ * @brief I2S handle Structure definition
+ */
+typedef struct
+{
+ SPI_TypeDef *Instance; /* I2S registers base address */
+
+ I2S_InitTypeDef Init; /* I2S communication parameters */
+
+ uint16_t *pTxBuffPtr; /* Pointer to I2S Tx transfer buffer */
+
+ __IO uint16_t TxXferSize; /* I2S Tx transfer size */
+
+ __IO uint16_t TxXferCount; /* I2S Tx transfer Counter */
+
+ uint16_t *pRxBuffPtr; /* Pointer to I2S Rx transfer buffer */
+
+ __IO uint16_t RxXferSize; /* I2S Rx transfer size */
+
+ __IO uint16_t RxXferCount; /* I2S Rx transfer counter */
+
+ DMA_HandleTypeDef *hdmatx; /* I2S Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* I2S Rx DMA handle parameters */
+
+ __IO HAL_LockTypeDef Lock; /* I2S locking object */
+
+ __IO HAL_I2S_StateTypeDef State; /* I2S communication state */
+
+ __IO uint32_t ErrorCode; /* I2S Error code */
+
+}I2S_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup I2S_Exported_Constants I2S Exported Constants
+ * @{
+ */
+
+/** @defgroup I2S_Error_Code I2S Error Code
+ * @brief I2S Error Code
+ * @{
+ */
+#define HAL_I2S_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_I2S_ERROR_UDR ((uint32_t)0x00000001) /*!< I2S Underrun error */
+#define HAL_I2S_ERROR_OVR ((uint32_t)0x00000002) /*!< I2S Overrun error */
+#define HAL_I2SEX_ERROR_UDR ((uint32_t)0x00000004) /*!< I2S extended Underrun error */
+#define HAL_I2SEX_ERROR_OVR ((uint32_t)0x00000008) /*!< I2S extended Overrun error */
+#define HAL_I2S_ERROR_FRE ((uint32_t)0x00000010) /*!< I2S Frame format error */
+#define HAL_I2S_ERROR_DMA ((uint32_t)0x00000020) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Clock_Source I2S Clock Source
+ * @{
+ */
+#define I2S_CLOCK_PLL ((uint32_t)0x00000000)
+#define I2S_CLOCK_EXTERNAL ((uint32_t)0x00000001)
+#define I2S_CLOCK_PLLR ((uint32_t)0x00000002)
+#define I2S_CLOCK_PLLSRC ((uint32_t)0x00000003)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Mode I2S Mode
+ * @{
+ */
+#define I2S_MODE_SLAVE_TX ((uint32_t)0x00000000)
+#define I2S_MODE_SLAVE_RX ((uint32_t)0x00000100)
+#define I2S_MODE_MASTER_TX ((uint32_t)0x00000200)
+#define I2S_MODE_MASTER_RX ((uint32_t)0x00000300)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Standard I2S Standard
+ * @{
+ */
+#define I2S_STANDARD_PHILIPS ((uint32_t)0x00000000)
+#define I2S_STANDARD_MSB ((uint32_t)0x00000010)
+#define I2S_STANDARD_LSB ((uint32_t)0x00000020)
+#define I2S_STANDARD_PCM_SHORT ((uint32_t)0x00000030)
+#define I2S_STANDARD_PCM_LONG ((uint32_t)0x000000B0)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Data_Format I2S Data Format
+ * @{
+ */
+#define I2S_DATAFORMAT_16B ((uint32_t)0x00000000)
+#define I2S_DATAFORMAT_16B_EXTENDED ((uint32_t)0x00000001)
+#define I2S_DATAFORMAT_24B ((uint32_t)0x00000003)
+#define I2S_DATAFORMAT_32B ((uint32_t)0x00000005)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_MCLK_Output I2S Mclk Output
+ * @{
+ */
+#define I2S_MCLKOUTPUT_ENABLE ((uint32_t)SPI_I2SPR_MCKOE)
+#define I2S_MCLKOUTPUT_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Audio_Frequency I2S Audio Frequency
+ * @{
+ */
+#define I2S_AUDIOFREQ_192K ((uint32_t)192000)
+#define I2S_AUDIOFREQ_96K ((uint32_t)96000)
+#define I2S_AUDIOFREQ_48K ((uint32_t)48000)
+#define I2S_AUDIOFREQ_44K ((uint32_t)44100)
+#define I2S_AUDIOFREQ_32K ((uint32_t)32000)
+#define I2S_AUDIOFREQ_22K ((uint32_t)22050)
+#define I2S_AUDIOFREQ_16K ((uint32_t)16000)
+#define I2S_AUDIOFREQ_11K ((uint32_t)11025)
+#define I2S_AUDIOFREQ_8K ((uint32_t)8000)
+#define I2S_AUDIOFREQ_DEFAULT ((uint32_t)2)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_FullDuplex_Mode I2S FullDuplex Mode
+ * @{
+ */
+#define I2S_FULLDUPLEXMODE_DISABLE ((uint32_t)0x00000000)
+#define I2S_FULLDUPLEXMODE_ENABLE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Clock_Polarity I2S Clock Polarity
+ * @{
+ */
+#define I2S_CPOL_LOW ((uint32_t)0x00000000)
+#define I2S_CPOL_HIGH ((uint32_t)SPI_I2SCFGR_CKPOL)
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Interrupts_Definition I2S Interrupts Definition
+ * @{
+ */
+#define I2S_IT_TXE SPI_CR2_TXEIE
+#define I2S_IT_RXNE SPI_CR2_RXNEIE
+#define I2S_IT_ERR SPI_CR2_ERRIE
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Flags_Definition I2S Flags Definition
+ * @{
+ */
+#define I2S_FLAG_TXE SPI_SR_TXE
+#define I2S_FLAG_RXNE SPI_SR_RXNE
+
+#define I2S_FLAG_UDR SPI_SR_UDR
+#define I2S_FLAG_OVR SPI_SR_OVR
+#define I2S_FLAG_FRE SPI_SR_FRE
+
+#define I2S_FLAG_CHSIDE SPI_SR_CHSIDE
+#define I2S_FLAG_BSY SPI_SR_BSY
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup I2S_Exported_Macros I2S Exported Macros
+ * @{
+ */
+
+/** @brief Reset I2S handle state
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET)
+
+/** @brief Enable or disable the specified SPI peripheral (in I2S mode).
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR |= SPI_I2SCFGR_I2SE)
+#define __HAL_I2S_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR &= ~SPI_I2SCFGR_I2SE)
+
+/** @brief Enable or disable the specified I2S interrupts.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= ~(__INTERRUPT__))
+
+/** @brief Checks if the specified I2S interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral.
+ * @param __INTERRUPT__: specifies the I2S interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified I2S flag is set or not.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_FLAG_RXNE: Receive buffer not empty flag
+ * @arg I2S_FLAG_TXE: Transmit buffer empty flag
+ * @arg I2S_FLAG_UDR: Underrun flag
+ * @arg I2S_FLAG_OVR: Overrun flag
+ * @arg I2S_FLAG_FRE: Frame error flag
+ * @arg I2S_FLAG_CHSIDE: Channel Side flag
+ * @arg I2S_FLAG_BSY: Busy flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the I2S OVR pending flag.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg; \
+ tmpreg = (__HANDLE__)->Instance->DR; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Clears the I2S UDR pending flag.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg); \
+ } while(0)
+/**
+ * @}
+ */
+
+/* Include I2S Extension module */
+#include "stm32f4xx_hal_i2s_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2S_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup I2S_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DeInit (I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+
+/** @addtogroup I2S_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions *****************************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s);
+
+/* Peripheral Control and State functions **************************************/
+HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s);
+uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
+
+/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
+void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2S_Private_Constants I2S Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2S_Private_Macros I2S Private Macros
+ * @{
+ */
+#define IS_I2S_CLOCKSOURCE(CLOCK) (((CLOCK) == I2S_CLOCK_EXTERNAL) || \
+ ((CLOCK) == I2S_CLOCK_PLLR) ||\
+ ((CLOCK) == I2S_CLOCK_PLLSRC) ||\
+ ((CLOCK) == I2S_CLOCK_PLL))
+
+#define IS_I2S_MODE(MODE) (((MODE) == I2S_MODE_SLAVE_TX) || \
+ ((MODE) == I2S_MODE_SLAVE_RX) || \
+ ((MODE) == I2S_MODE_MASTER_TX) || \
+ ((MODE) == I2S_MODE_MASTER_RX))
+
+#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_STANDARD_PHILIPS) || \
+ ((STANDARD) == I2S_STANDARD_MSB) || \
+ ((STANDARD) == I2S_STANDARD_LSB) || \
+ ((STANDARD) == I2S_STANDARD_PCM_SHORT) || \
+ ((STANDARD) == I2S_STANDARD_PCM_LONG))
+
+#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DATAFORMAT_16B) || \
+ ((FORMAT) == I2S_DATAFORMAT_16B_EXTENDED) || \
+ ((FORMAT) == I2S_DATAFORMAT_24B) || \
+ ((FORMAT) == I2S_DATAFORMAT_32B))
+
+#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOUTPUT_ENABLE) || \
+ ((OUTPUT) == I2S_MCLKOUTPUT_DISABLE))
+
+#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AUDIOFREQ_8K) && \
+ ((FREQ) <= I2S_AUDIOFREQ_192K)) || \
+ ((FREQ) == I2S_AUDIOFREQ_DEFAULT))
+
+#define IS_I2S_FULLDUPLEX_MODE(MODE) (((MODE) == I2S_FULLDUPLEXMODE_DISABLE) || \
+ ((MODE) == I2S_FULLDUPLEXMODE_ENABLE))
+
+#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_LOW) || \
+ ((CPOL) == I2S_CPOL_HIGH))
+
+#define I2SxEXT(__INSTANCE__) ((__INSTANCE__) == (SPI2)? (SPI_TypeDef *)(I2S2ext_BASE): (SPI_TypeDef *)(I2S3ext_BASE))
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup I2S_Private_Functions I2S Private Functions
+ * @{
+ */
+void I2S_DMATxCplt(DMA_HandleTypeDef *hdma);
+void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
+void I2S_DMARxCplt(DMA_HandleTypeDef *hdma);
+void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+void I2S_DMAError(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, uint32_t Status, uint32_t Timeout);
+HAL_StatusTypeDef I2S_Transmit_IT(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef I2S_Receive_IT(I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_I2S_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_i2s_ex.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,148 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2s_ex.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of I2S HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_I2S_EX_H
+#define __STM32F4xx_HAL_I2S_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2SEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2SEx_Exported_Types I2S Exported Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup I2SEx_Exported_Constants I2S Exported Constants
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup I2SEx_Exported_Macros I2S Exported Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2SEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup I2SEx_Exported_Functions_Group1
+ * @{
+ */
+
+/* Extended features functions **************************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size, uint32_t Timeout);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup I2SEx_Private_Constants I2S Private Constants
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup I2SEx_Private_Macros I2S Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup I2SEx_Private_Functions I2S Private Functions
+ * @{
+ */
+HAL_StatusTypeDef I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s);
+uint32_t I2S_GetInputClock(I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_I2S_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_irda.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,538 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_irda.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of IRDA HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_IRDA_H
+#define __STM32F4xx_HAL_IRDA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup IRDA
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Types IRDA Exported Types
+ * @{
+ */
+/**
+ * @brief IRDA Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate.
+ The baud rate is computed using the following formula:
+ - IntegerDivider = ((PCLKx) / (8 * (hirda->Init.BaudRate)))
+ - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref IRDA_Word_Length */
+
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref IRDA_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref IRDA_Mode */
+
+ uint8_t Prescaler; /*!< Specifies the Prescaler */
+
+ uint32_t IrDAMode; /*!< Specifies the IrDA mode
+ This parameter can be a value of @ref IRDA_Low_Power */
+}IRDA_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_IRDA_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */
+ HAL_IRDA_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_IRDA_STATE_BUSY = 0x02, /*!< An internal process is ongoing */
+ HAL_IRDA_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_IRDA_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_IRDA_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_IRDA_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_IRDA_STATE_ERROR = 0x04 /*!< Error */
+}HAL_IRDA_StateTypeDef;
+
+/**
+ * @brief IRDA handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /* USART registers base address */
+
+ IRDA_InitTypeDef Init; /* IRDA communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to IRDA Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* IRDA Tx Transfer size */
+
+ uint16_t TxXferCount; /* IRDA Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to IRDA Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* IRDA Rx Transfer size */
+
+ uint16_t RxXferCount; /* IRDA Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /* IRDA Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* IRDA Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ __IO HAL_IRDA_StateTypeDef State; /* IRDA communication state */
+
+ __IO uint32_t ErrorCode; /* IRDA Error code */
+
+}IRDA_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Constants IRDA Exported constants
+ * @{
+ */
+/** @defgroup IRDA_Error_Code IRDA Error Code
+ * @brief IRDA Error Code
+ * @{
+ */
+#define HAL_IRDA_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_IRDA_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */
+#define HAL_IRDA_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */
+#define HAL_IRDA_ERROR_FE ((uint32_t)0x00000004) /*!< Frame error */
+#define HAL_IRDA_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */
+#define HAL_IRDA_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Word_Length IRDA Word Length
+ * @{
+ */
+#define IRDA_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define IRDA_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Parity IRDA Parity
+ * @{
+ */
+#define IRDA_PARITY_NONE ((uint32_t)0x00000000)
+#define IRDA_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define IRDA_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Mode IRDA Transfer Mode
+ * @{
+ */
+#define IRDA_MODE_RX ((uint32_t)USART_CR1_RE)
+#define IRDA_MODE_TX ((uint32_t)USART_CR1_TE)
+#define IRDA_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Low_Power IRDA Low Power
+ * @{
+ */
+#define IRDA_POWERMODE_LOWPOWER ((uint32_t)USART_CR3_IRLP)
+#define IRDA_POWERMODE_NORMAL ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Flags IRDA Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the SR register
+ * @{
+ */
+#define IRDA_FLAG_TXE ((uint32_t)0x00000080)
+#define IRDA_FLAG_TC ((uint32_t)0x00000040)
+#define IRDA_FLAG_RXNE ((uint32_t)0x00000020)
+#define IRDA_FLAG_IDLE ((uint32_t)0x00000010)
+#define IRDA_FLAG_ORE ((uint32_t)0x00000008)
+#define IRDA_FLAG_NE ((uint32_t)0x00000004)
+#define IRDA_FLAG_FE ((uint32_t)0x00000002)
+#define IRDA_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Interrupt_definition IRDA Interrupt Definitions
+ * Elements values convention: 0xY000XXXX
+ * - XXXX : Interrupt mask in the XX register
+ * - Y : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * @{
+ */
+#define IRDA_IT_PE ((uint32_t)(IRDA_CR1_REG_INDEX << 28 | USART_CR1_PEIE))
+#define IRDA_IT_TXE ((uint32_t)(IRDA_CR1_REG_INDEX << 28 | USART_CR1_TXEIE))
+#define IRDA_IT_TC ((uint32_t)(IRDA_CR1_REG_INDEX << 28 | USART_CR1_TCIE))
+#define IRDA_IT_RXNE ((uint32_t)(IRDA_CR1_REG_INDEX << 28 | USART_CR1_RXNEIE))
+#define IRDA_IT_IDLE ((uint32_t)(IRDA_CR1_REG_INDEX << 28 | USART_CR1_IDLEIE))
+
+#define IRDA_IT_LBD ((uint32_t)(IRDA_CR2_REG_INDEX << 28 | USART_CR2_LBDIE))
+
+#define IRDA_IT_CTS ((uint32_t)(IRDA_CR3_REG_INDEX << 28 | USART_CR3_CTSIE))
+#define IRDA_IT_ERR ((uint32_t)(IRDA_CR3_REG_INDEX << 28 | USART_CR3_EIE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Macros IRDA Exported Macros
+ * @{
+ */
+
+/** @brief Reset IRDA handle state
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IRDA_STATE_RESET)
+
+/** @brief Flushs the IRDA DR register
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ */
+#define __HAL_IRDA_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
+
+/** @brief Checks whether the specified IRDA flag is set or not.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_FLAG_TXE: Transmit data register empty flag
+ * @arg IRDA_FLAG_TC: Transmission Complete flag
+ * @arg IRDA_FLAG_RXNE: Receive data register not empty flag
+ * @arg IRDA_FLAG_IDLE: Idle Line detection flag
+ * @arg IRDA_FLAG_ORE: OverRun Error flag
+ * @arg IRDA_FLAG_NE: Noise Error flag
+ * @arg IRDA_FLAG_FE: Framing Error flag
+ * @arg IRDA_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified IRDA pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg IRDA_FLAG_TC: Transmission Complete flag.
+ * @arg IRDA_FLAG_RXNE: Receive data register not empty flag.
+ *
+ * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun
+ * error) and IDLE (Idle line detected) flags are cleared by software
+ * sequence: a read operation to USART_SR register followed by a read
+ * operation to USART_DR register.
+ * @note RXNE flag can be also cleared by a read to the USART_DR register.
+ * @note TC flag can be also cleared by software sequence: a read operation to
+ * USART_SR register followed by a write operation to USART_DR register.
+ * @note TXE flag is cleared only by a write to the USART_DR register.
+ *
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief Clear the IRDA PE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Clear the IRDA FE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_FEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the IRDA NE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_NEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the IRDA ORE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_OREFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the IRDA IDLE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_IDLEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Enables or disables the specified IRDA interrupt.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __INTERRUPT__: specifies the IRDA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & IRDA_IT_MASK)): \
+ (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & IRDA_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & IRDA_IT_MASK)))
+#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & IRDA_IT_MASK)): \
+ (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & IRDA_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & IRDA_IT_MASK)))
+
+/** @brief Checks whether the specified IRDA interrupt has occurred or not.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __IT__: specifies the IRDA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ERR: Error interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == 1)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28) == 2)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & IRDA_IT_MASK))
+
+/** @brief Macro to enable the IRDA's one bit sample method
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * @retval None
+ */
+#define __HAL_IRDA_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+
+/** @brief Macro to disable the IRDA's one bit sample method
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * @retval None
+ */
+#define __HAL_IRDA_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
+
+/** @brief Enable UART/USART associated to IRDA Handle
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * IRDA Handle selects the USARTx or UARTy peripheral
+ * (USART,UART availability and x,y values depending on device).
+ * @retval None
+ */
+#define __HAL_IRDA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable UART/USART associated to IRDA Handle
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * IRDA Handle selects the USARTx or UARTy peripheral
+ * (USART,UART availability and x,y values depending on device).
+ * @retval None
+ */
+#define __HAL_IRDA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup IRDA_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup IRDA_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda);
+/**
+ * @}
+ */
+
+/** @addtogroup IRDA_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda);
+/**
+ * @}
+ */
+
+/** @addtogroup IRDA_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda);
+uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup IRDA_Private_Constants IRDA Private Constants
+ * @{
+ */
+
+/** @brief IRDA interruptions flag mask
+ *
+ */
+#define IRDA_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \
+ USART_CR1_IDLEIE | USART_CR2_LBDIE | USART_CR3_CTSIE | USART_CR3_EIE )
+
+
+#define IRDA_CR1_REG_INDEX 1
+#define IRDA_CR2_REG_INDEX 2
+#define IRDA_CR3_REG_INDEX 3
+/**
+ * @}
+ */
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup IRDA_Private_Macros IRDA Private Macros
+ * @{
+ */
+#define IS_IRDA_WORD_LENGTH(LENGTH) (((LENGTH) == IRDA_WORDLENGTH_8B) || \
+ ((LENGTH) == IRDA_WORDLENGTH_9B))
+#define IS_IRDA_PARITY(PARITY) (((PARITY) == IRDA_PARITY_NONE) || \
+ ((PARITY) == IRDA_PARITY_EVEN) || \
+ ((PARITY) == IRDA_PARITY_ODD))
+#define IS_IRDA_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3) == 0x00) && ((MODE) != (uint32_t)0x000000))
+#define IS_IRDA_POWERMODE(MODE) (((MODE) == IRDA_POWERMODE_LOWPOWER) || \
+ ((MODE) == IRDA_POWERMODE_NORMAL))
+#define IS_IRDA_BAUDRATE(BAUDRATE) ((BAUDRATE) < 115201)
+
+#define IRDA_DIV(_PCLK_, _BAUD_) (((_PCLK_)*25)/(4*(_BAUD_)))
+#define IRDA_DIVMANT(_PCLK_, _BAUD_) (IRDA_DIV((_PCLK_), (_BAUD_))/100)
+#define IRDA_DIVFRAQ(_PCLK_, _BAUD_) (((IRDA_DIV((_PCLK_), (_BAUD_)) - (IRDA_DIVMANT((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100)
+#define IRDA_BRR(_PCLK_, _BAUD_) ((IRDA_DIVMANT((_PCLK_), (_BAUD_)) << 4)|(IRDA_DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0F))
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup IRDA_Private_Functions IRDA Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_IRDA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_iwdg.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,288 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_iwdg.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of IWDG HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_IWDG_H
+#define __STM32F4xx_HAL_IWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup IWDG
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Types IWDG Exported Types
+ * @{
+ */
+
+/**
+ * @brief IWDG HAL State Structure definition
+ */
+typedef enum
+{
+ HAL_IWDG_STATE_RESET = 0x00, /*!< IWDG not yet initialized or disabled */
+ HAL_IWDG_STATE_READY = 0x01, /*!< IWDG initialized and ready for use */
+ HAL_IWDG_STATE_BUSY = 0x02, /*!< IWDG internal process is ongoing */
+ HAL_IWDG_STATE_TIMEOUT = 0x03, /*!< IWDG timeout state */
+ HAL_IWDG_STATE_ERROR = 0x04 /*!< IWDG error state */
+}HAL_IWDG_StateTypeDef;
+
+/**
+ * @brief IWDG Init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Select the prescaler of the IWDG.
+ This parameter can be a value of @ref IWDG_Prescaler */
+
+ uint32_t Reload; /*!< Specifies the IWDG down-counter reload value.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
+}IWDG_InitTypeDef;
+
+/**
+ * @brief IWDG Handle Structure definition
+ */
+typedef struct
+{
+ IWDG_TypeDef *Instance; /*!< Register base address */
+
+ IWDG_InitTypeDef Init; /*!< IWDG required parameters */
+
+ HAL_LockTypeDef Lock; /*!< IWDG Locking object */
+
+ __IO HAL_IWDG_StateTypeDef State; /*!< IWDG communication state */
+}IWDG_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Constants IWDG Exported Constants
+ * @{
+ */
+
+/** @defgroup IWDG_Registers_BitMask IWDG Registers BitMask
+ * @brief IWDG registers bit mask
+ * @{
+ */
+/* --- KR Register ---*/
+/* KR register bit mask */
+#define IWDG_KEY_RELOAD ((uint32_t)0xAAAA) /*!< IWDG Reload Counter Enable */
+#define IWDG_KEY_ENABLE ((uint32_t)0xCCCC) /*!< IWDG Peripheral Enable */
+#define IWDG_KEY_WRITE_ACCESS_ENABLE ((uint32_t)0x5555) /*!< IWDG KR Write Access Enable */
+#define IWDG_KEY_WRITE_ACCESS_DISABLE ((uint32_t)0x0000) /*!< IWDG KR Write Access Disable */
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Flag_definition IWDG Flag definition
+ * @{
+ */
+#define IWDG_FLAG_PVU ((uint32_t)IWDG_SR_PVU) /*!< Watchdog counter prescaler value update Flag */
+#define IWDG_FLAG_RVU ((uint32_t)IWDG_SR_RVU) /*!< Watchdog counter reload value update Flag */
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Prescaler IWDG Prescaler
+ * @{
+ */
+#define IWDG_PRESCALER_4 ((uint8_t)0x00) /*!< IWDG prescaler set to 4 */
+#define IWDG_PRESCALER_8 ((uint8_t)(IWDG_PR_PR_0)) /*!< IWDG prescaler set to 8 */
+#define IWDG_PRESCALER_16 ((uint8_t)(IWDG_PR_PR_1)) /*!< IWDG prescaler set to 16 */
+#define IWDG_PRESCALER_32 ((uint8_t)(IWDG_PR_PR_1 | IWDG_PR_PR_0)) /*!< IWDG prescaler set to 32 */
+#define IWDG_PRESCALER_64 ((uint8_t)(IWDG_PR_PR_2)) /*!< IWDG prescaler set to 64 */
+#define IWDG_PRESCALER_128 ((uint8_t)(IWDG_PR_PR_2 | IWDG_PR_PR_0)) /*!< IWDG prescaler set to 128 */
+#define IWDG_PRESCALER_256 ((uint8_t)(IWDG_PR_PR_2 | IWDG_PR_PR_1)) /*!< IWDG prescaler set to 256 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Macros IWDG Exported Macros
+ * @{
+ */
+
+/** @brief Reset IWDG handle state
+ * @param __HANDLE__: IWDG handle.
+ * @retval None
+ */
+#define __HAL_IWDG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IWDG_STATE_RESET)
+
+/**
+ * @brief Enables the IWDG peripheral.
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_START(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_ENABLE)
+
+/**
+ * @brief Reloads IWDG counter with value defined in the reload register
+ * (write access to IWDG_PR and IWDG_RLR registers disabled).
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_RELOAD_COUNTER(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_RELOAD)
+
+/**
+ * @brief Gets the selected IWDG's flag status.
+ * @param __HANDLE__: IWDG handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg IWDG_FLAG_PVU: Watchdog counter reload value update flag
+ * @arg IWDG_FLAG_RVU: Watchdog counter prescaler value flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_IWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup IWDG_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup IWDG_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg);
+void HAL_IWDG_MspInit(IWDG_HandleTypeDef *hiwdg);
+/**
+ * @}
+ */
+
+/** @addtogroup IWDG_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ****************************************************/
+HAL_StatusTypeDef HAL_IWDG_Start(IWDG_HandleTypeDef *hiwdg);
+HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg);
+/**
+ * @}
+ */
+
+/** @addtogroup IWDG_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions ************************************************/
+HAL_IWDG_StateTypeDef HAL_IWDG_GetState(IWDG_HandleTypeDef *hiwdg);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup IWDG_Private_Macros IWDG Private Macros
+ * @{
+ */
+
+/**
+ * @brief Enables write access to IWDG_PR and IWDG_RLR registers.
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define IWDG_ENABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_ENABLE)
+
+/**
+ * @brief Disables write access to IWDG_PR and IWDG_RLR registers.
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define IWDG_DISABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_DISABLE)
+
+
+#define IS_IWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == IWDG_PRESCALER_4) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_8) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_16) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_32) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_64) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_128)|| \
+ ((__PRESCALER__) == IWDG_PRESCALER_256))
+
+
+#define IS_IWDG_RELOAD(__RELOAD__) ((__RELOAD__) <= 0xFFF)
+
+/**
+ * @}
+ */
+
+/* Private define ------------------------------------------------------------*/
+ /** @defgroup IWDG_Private_Constants IWDG Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_IWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_ltdc.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,631 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_ltdc.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of LTDC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_LTDC_H
+#define __STM32F4xx_HAL_LTDC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F429xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup LTDC LTDC
+ * @brief LTDC HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup LTDC_Exported_Types LTDC Exported Types
+ * @{
+ */
+#define MAX_LAYER 2
+
+/**
+ * @brief LTDC color structure definition
+ */
+typedef struct
+{
+ uint8_t Blue; /*!< Configures the blue value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint8_t Green; /*!< Configures the green value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint8_t Red; /*!< Configures the red value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint8_t Reserved; /*!< Reserved 0xFF */
+} LTDC_ColorTypeDef;
+
+/**
+ * @brief LTDC Init structure definition
+ */
+typedef struct
+{
+ uint32_t HSPolarity; /*!< configures the horizontal synchronization polarity.
+ This parameter can be one value of @ref LTDC_HS_POLARITY */
+
+ uint32_t VSPolarity; /*!< configures the vertical synchronization polarity.
+ This parameter can be one value of @ref LTDC_VS_POLARITY */
+
+ uint32_t DEPolarity; /*!< configures the data enable polarity.
+ This parameter can be one of value of @ref LTDC_DE_POLARITY */
+
+ uint32_t PCPolarity; /*!< configures the pixel clock polarity.
+ This parameter can be one of value of @ref LTDC_PC_POLARITY */
+
+ uint32_t HorizontalSync; /*!< configures the number of Horizontal synchronization width.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+ uint32_t VerticalSync; /*!< configures the number of Vertical synchronization height.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0x7FF. */
+
+ uint32_t AccumulatedHBP; /*!< configures the accumulated horizontal back porch width.
+ This parameter must be a number between Min_Data = LTDC_HorizontalSync and Max_Data = 0xFFF. */
+
+ uint32_t AccumulatedVBP; /*!< configures the accumulated vertical back porch height.
+ This parameter must be a number between Min_Data = LTDC_VerticalSync and Max_Data = 0x7FF. */
+
+ uint32_t AccumulatedActiveW; /*!< configures the accumulated active width.
+ This parameter must be a number between Min_Data = LTDC_AccumulatedHBP and Max_Data = 0xFFF. */
+
+ uint32_t AccumulatedActiveH; /*!< configures the accumulated active height.
+ This parameter must be a number between Min_Data = LTDC_AccumulatedVBP and Max_Data = 0x7FF. */
+
+ uint32_t TotalWidth; /*!< configures the total width.
+ This parameter must be a number between Min_Data = LTDC_AccumulatedActiveW and Max_Data = 0xFFF. */
+
+ uint32_t TotalHeigh; /*!< configures the total height.
+ This parameter must be a number between Min_Data = LTDC_AccumulatedActiveH and Max_Data = 0x7FF. */
+
+ LTDC_ColorTypeDef Backcolor; /*!< Configures the background color. */
+} LTDC_InitTypeDef;
+
+/**
+ * @brief LTDC Layer structure definition
+ */
+typedef struct
+{
+ uint32_t WindowX0; /*!< Configures the Window Horizontal Start Position.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+ uint32_t WindowX1; /*!< Configures the Window Horizontal Stop Position.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+ uint32_t WindowY0; /*!< Configures the Window vertical Start Position.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+ uint32_t WindowY1; /*!< Configures the Window vertical Stop Position.
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t PixelFormat; /*!< Specifies the pixel format.
+ This parameter can be one of value of @ref LTDC_Pixelformat */
+
+ uint32_t Alpha; /*!< Specifies the constant alpha used for blending.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint32_t Alpha0; /*!< Configures the default alpha value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint32_t BlendingFactor1; /*!< Select the blending factor 1.
+ This parameter can be one of value of @ref LTDC_BlendingFactor1 */
+
+ uint32_t BlendingFactor2; /*!< Select the blending factor 2.
+ This parameter can be one of value of @ref LTDC_BlendingFactor2 */
+
+ uint32_t FBStartAdress; /*!< Configures the color frame buffer address */
+
+ uint32_t ImageWidth; /*!< Configures the color frame buffer line length.
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x1FFF. */
+
+ uint32_t ImageHeight; /*!< Specifies the number of line in frame buffer.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0x7FF. */
+
+ LTDC_ColorTypeDef Backcolor; /*!< Configures the layer background color. */
+} LTDC_LayerCfgTypeDef;
+
+/**
+ * @brief HAL LTDC State structures definition
+ */
+typedef enum
+{
+ HAL_LTDC_STATE_RESET = 0x00, /*!< LTDC not yet initialized or disabled */
+ HAL_LTDC_STATE_READY = 0x01, /*!< LTDC initialized and ready for use */
+ HAL_LTDC_STATE_BUSY = 0x02, /*!< LTDC internal process is ongoing */
+ HAL_LTDC_STATE_TIMEOUT = 0x03, /*!< LTDC Timeout state */
+ HAL_LTDC_STATE_ERROR = 0x04 /*!< LTDC state error */
+}HAL_LTDC_StateTypeDef;
+
+/**
+ * @brief LTDC handle Structure definition
+ */
+typedef struct
+{
+ LTDC_TypeDef *Instance; /*!< LTDC Register base address */
+
+ LTDC_InitTypeDef Init; /*!< LTDC parameters */
+
+ LTDC_LayerCfgTypeDef LayerCfg[MAX_LAYER]; /*!< LTDC Layers parameters */
+
+ HAL_LockTypeDef Lock; /*!< LTDC Lock */
+
+ __IO HAL_LTDC_StateTypeDef State; /*!< LTDC state */
+
+ __IO uint32_t ErrorCode; /*!< LTDC Error code */
+
+} LTDC_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup LTDC_Exported_Constants LTDC Exported Constants
+ * @{
+ */
+
+/** @defgroup LTDC_Error_Code LTDC Error Code
+ * @{
+ */
+#define HAL_LTDC_ERROR_NONE ((uint32_t)0x00000000) /*!< LTDC No error */
+#define HAL_LTDC_ERROR_TE ((uint32_t)0x00000001) /*!< LTDC Transfer error */
+#define HAL_LTDC_ERROR_FU ((uint32_t)0x00000002) /*!< LTDC FIFO Underrun */
+#define HAL_LTDC_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< LTDC Timeout error */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_HS_POLARITY LTDC HS POLARITY
+ * @{
+ */
+#define LTDC_HSPOLARITY_AL ((uint32_t)0x00000000) /*!< Horizontal Synchronization is active low. */
+#define LTDC_HSPOLARITY_AH LTDC_GCR_HSPOL /*!< Horizontal Synchronization is active high. */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_VS_POLARITY LTDC VS POLARITY
+ * @{
+ */
+#define LTDC_VSPOLARITY_AL ((uint32_t)0x00000000) /*!< Vertical Synchronization is active low. */
+#define LTDC_VSPOLARITY_AH LTDC_GCR_VSPOL /*!< Vertical Synchronization is active high. */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_DE_POLARITY LTDC DE POLARITY
+ * @{
+ */
+#define LTDC_DEPOLARITY_AL ((uint32_t)0x00000000) /*!< Data Enable, is active low. */
+#define LTDC_DEPOLARITY_AH LTDC_GCR_DEPOL /*!< Data Enable, is active high. */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_PC_POLARITY LTDC PC POLARITY
+ * @{
+ */
+#define LTDC_PCPOLARITY_IPC ((uint32_t)0x00000000) /*!< input pixel clock. */
+#define LTDC_PCPOLARITY_IIPC LTDC_GCR_PCPOL /*!< inverted input pixel clock. */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_SYNC LTDC SYNC
+ * @{
+ */
+#define LTDC_HORIZONTALSYNC (LTDC_SSCR_HSW >> 16) /*!< Horizontal synchronization width. */
+#define LTDC_VERTICALSYNC LTDC_SSCR_VSH /*!< Vertical synchronization height. */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_BACK_COLOR LTDC BACK COLOR
+ * @{
+ */
+#define LTDC_COLOR ((uint32_t)0x000000FF) /*!< Color mask */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_BlendingFactor1 LTDC Blending Factor1
+ * @{
+ */
+#define LTDC_BLENDING_FACTOR1_CA ((uint32_t)0x00000400) /*!< Blending factor : Cte Alpha */
+#define LTDC_BLENDING_FACTOR1_PAxCA ((uint32_t)0x00000600) /*!< Blending factor : Cte Alpha x Pixel Alpha*/
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_BlendingFactor2 LTDC Blending Factor2
+ * @{
+ */
+#define LTDC_BLENDING_FACTOR2_CA ((uint32_t)0x00000005) /*!< Blending factor : Cte Alpha */
+#define LTDC_BLENDING_FACTOR2_PAxCA ((uint32_t)0x00000007) /*!< Blending factor : Cte Alpha x Pixel Alpha*/
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Pixelformat LTDC Pixel format
+ * @{
+ */
+#define LTDC_PIXEL_FORMAT_ARGB8888 ((uint32_t)0x00000000) /*!< ARGB8888 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_RGB888 ((uint32_t)0x00000001) /*!< RGB888 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_RGB565 ((uint32_t)0x00000002) /*!< RGB565 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_ARGB1555 ((uint32_t)0x00000003) /*!< ARGB1555 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_ARGB4444 ((uint32_t)0x00000004) /*!< ARGB4444 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_L8 ((uint32_t)0x00000005) /*!< L8 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_AL44 ((uint32_t)0x00000006) /*!< AL44 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_AL88 ((uint32_t)0x00000007) /*!< AL88 LTDC pixel format */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Alpha LTDC Alpha
+ * @{
+ */
+#define LTDC_ALPHA LTDC_LxCACR_CONSTA /*!< LTDC Cte Alpha mask */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_LAYER_Config LTDC LAYER Config
+ * @{
+ */
+#define LTDC_STOPPOSITION (LTDC_LxWHPCR_WHSPPOS >> 16) /*!< LTDC Layer stop position */
+#define LTDC_STARTPOSITION LTDC_LxWHPCR_WHSTPOS /*!< LTDC Layer start position */
+
+#define LTDC_COLOR_FRAME_BUFFER LTDC_LxCFBLR_CFBLL /*!< LTDC Layer Line length */
+#define LTDC_LINE_NUMBER LTDC_LxCFBLNR_CFBLNBR /*!< LTDC Layer Line number */
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Interrupts LTDC Interrupts
+ * @{
+ */
+#define LTDC_IT_LI LTDC_IER_LIE
+#define LTDC_IT_FU LTDC_IER_FUIE
+#define LTDC_IT_TE LTDC_IER_TERRIE
+#define LTDC_IT_RR LTDC_IER_RRIE
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Flag LTDC Flag
+ * @{
+ */
+#define LTDC_FLAG_LI LTDC_ISR_LIF
+#define LTDC_FLAG_FU LTDC_ISR_FUIF
+#define LTDC_FLAG_TE LTDC_ISR_TERRIF
+#define LTDC_FLAG_RR LTDC_ISR_RRIF
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup LTDC_Exported_Macros LTDC Exported Macros
+ * @{
+ */
+
+/** @brief Reset LTDC handle state
+ * @param __HANDLE__: specifies the LTDC handle.
+ * @retval None
+ */
+#define __HAL_LTDC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LTDC_STATE_RESET)
+
+/**
+ * @brief Enable the LTDC.
+ * @param __HANDLE__: LTDC handle
+ * @retval None.
+ */
+#define __HAL_LTDC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->GCR |= LTDC_GCR_LTDCEN)
+
+/**
+ * @brief Disable the LTDC.
+ * @param __HANDLE__: LTDC handle
+ * @retval None.
+ */
+#define __HAL_LTDC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->GCR &= ~(LTDC_GCR_LTDCEN))
+
+/**
+ * @brief Enable the LTDC Layer.
+ * @param __HANDLE__: LTDC handle
+ * @param __LAYER__: Specify the layer to be enabled
+ * This parameter can be 0 or 1
+ * @retval None.
+ */
+#define __HAL_LTDC_LAYER_ENABLE(__HANDLE__, __LAYER__) ((LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR |= (uint32_t)LTDC_LxCR_LEN)
+
+/**
+ * @brief Disable the LTDC Layer.
+ * @param __HANDLE__: LTDC handle
+ * @param __LAYER__: Specify the layer to be disabled
+ * This parameter can be 0 or 1
+ * @retval None.
+ */
+#define __HAL_LTDC_LAYER_DISABLE(__HANDLE__, __LAYER__) ((LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR &= ~(uint32_t)LTDC_LxCR_LEN)
+
+/**
+ * @brief Reload Layer Configuration.
+ * @param __HANDLE__: LTDC handle
+ * @retval None.
+ */
+#define __HAL_LTDC_RELOAD_CONFIG(__HANDLE__) ((__HANDLE__)->Instance->SRCR |= LTDC_SRCR_IMR)
+
+/* Interrupt & Flag management */
+/**
+ * @brief Get the LTDC pending flags.
+ * @param __HANDLE__: LTDC handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg LTDC_FLAG_LI: Line Interrupt flag
+ * @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag
+ * @arg LTDC_FLAG_TE: Transfer Error interrupt flag
+ * @arg LTDC_FLAG_RR: Register Reload Interrupt Flag
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __HAL_LTDC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
+
+/**
+ * @brief Clears the LTDC pending flags.
+ * @param __HANDLE__: LTDC handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg LTDC_FLAG_LI: Line Interrupt flag
+ * @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag
+ * @arg LTDC_FLAG_TE: Transfer Error interrupt flag
+ * @arg LTDC_FLAG_RR: Register Reload Interrupt Flag
+ * @retval None
+ */
+#define __HAL_LTDC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/**
+ * @brief Enables the specified LTDC interrupts.
+ * @param __HANDLE__: LTDC handle
+ * @param __INTERRUPT__: specifies the LTDC interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg LTDC_IT_LI: Line Interrupt flag
+ * @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
+ * @arg LTDC_IT_TE: Transfer Error interrupt flag
+ * @arg LTDC_IT_RR: Register Reload Interrupt Flag
+ * @retval None
+ */
+#define __HAL_LTDC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified LTDC interrupts.
+ * @param __HANDLE__: LTDC handle
+ * @param __INTERRUPT__: specifies the LTDC interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg LTDC_IT_LI: Line Interrupt flag
+ * @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
+ * @arg LTDC_IT_TE: Transfer Error interrupt flag
+ * @arg LTDC_IT_RR: Register Reload Interrupt Flag
+ * @retval None
+ */
+#define __HAL_LTDC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__))
+
+/**
+ * @brief Checks whether the specified LTDC interrupt has occurred or not.
+ * @param __HANDLE__: LTDC handle
+ * @param __INTERRUPT__: specifies the LTDC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg LTDC_IT_LI: Line Interrupt flag
+ * @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
+ * @arg LTDC_IT_TE: Transfer Error interrupt flag
+ * @arg LTDC_IT_RR: Register Reload Interrupt Flag
+ * @retval The state of INTERRUPT (SET or RESET).
+ */
+#define __HAL_LTDC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->ISR & (__INTERRUPT__))
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup LTDC_Exported_Functions
+ * @{
+ */
+/** @addtogroup LTDC_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_LTDC_Init(LTDC_HandleTypeDef *hltdc);
+HAL_StatusTypeDef HAL_LTDC_DeInit(LTDC_HandleTypeDef *hltdc);
+void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc);
+void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc);
+void HAL_LTDC_ErrorCallback(LTDC_HandleTypeDef *hltdc);
+void HAL_LTDC_LineEvenCallback(LTDC_HandleTypeDef *hltdc);
+/**
+ * @}
+ */
+
+/** @addtogroup LTDC_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *****************************************************/
+void HAL_LTDC_IRQHandler(LTDC_HandleTypeDef *hltdc);
+/**
+ * @}
+ */
+
+/** @addtogroup LTDC_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_LTDC_ConfigLayer(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetWindowSize(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetWindowPosition(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetPixelFormat(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetAlpha(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetAddress(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_ConfigCLUT(LTDC_HandleTypeDef *hltdc, uint32_t *pCLUT, uint32_t CLUTSize, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_EnableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_DisableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_EnableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_DisableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_ProgramLineEvent(LTDC_HandleTypeDef *hltdc, uint32_t Line);
+HAL_StatusTypeDef HAL_LTDC_EnableDither(LTDC_HandleTypeDef *hltdc);
+HAL_StatusTypeDef HAL_LTDC_DisableDither(LTDC_HandleTypeDef *hltdc);
+/**
+ * @}
+ */
+
+/** @addtogroup LTDC_Exported_Functions_Group4
+ * @{
+ */
+/* Peripheral State functions *************************************************/
+HAL_LTDC_StateTypeDef HAL_LTDC_GetState(LTDC_HandleTypeDef *hltdc);
+uint32_t HAL_LTDC_GetError(LTDC_HandleTypeDef *hltdc);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/** @defgroup LTDC_Private_Types LTDC Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup LTDC_Private_Variables LTDC Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup LTDC_Private_Constants LTDC Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup LTDC_Private_Macros LTDC Private Macros
+ * @{
+ */
+#define LTDC_LAYER(__HANDLE__, __LAYER__) ((LTDC_Layer_TypeDef *)((uint32_t)(((uint32_t)((__HANDLE__)->Instance)) + 0x84 + (0x80*(__LAYER__)))))
+#define IS_LTDC_LAYER(LAYER) ((LAYER) <= MAX_LAYER)
+#define IS_LTDC_HSPOL(HSPOL) (((HSPOL) == LTDC_HSPOLARITY_AL) || \
+ ((HSPOL) == LTDC_HSPOLARITY_AH))
+#define IS_LTDC_VSPOL(VSPOL) (((VSPOL) == LTDC_VSPOLARITY_AL) || \
+ ((VSPOL) == LTDC_VSPOLARITY_AH))
+#define IS_LTDC_DEPOL(DEPOL) (((DEPOL) == LTDC_DEPOLARITY_AL) || \
+ ((DEPOL) == LTDC_DEPOLARITY_AH))
+#define IS_LTDC_PCPOL(PCPOL) (((PCPOL) == LTDC_PCPOLARITY_IPC) || \
+ ((PCPOL) == LTDC_PCPOLARITY_IIPC))
+#define IS_LTDC_HSYNC(HSYNC) ((HSYNC) <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_VSYNC(VSYNC) ((VSYNC) <= LTDC_VERTICALSYNC)
+#define IS_LTDC_AHBP(AHBP) ((AHBP) <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_AVBP(AVBP) ((AVBP) <= LTDC_VERTICALSYNC)
+#define IS_LTDC_AAW(AAW) ((AAW) <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_AAH(AAH) ((AAH) <= LTDC_VERTICALSYNC)
+#define IS_LTDC_TOTALW(TOTALW) ((TOTALW) <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_TOTALH(TOTALH) ((TOTALH) <= LTDC_VERTICALSYNC)
+#define IS_LTDC_BLUEVALUE(BBLUE) ((BBLUE) <= LTDC_COLOR)
+#define IS_LTDC_GREENVALUE(BGREEN) ((BGREEN) <= LTDC_COLOR)
+#define IS_LTDC_REDVALUE(BRED) ((BRED) <= LTDC_COLOR)
+#define IS_LTDC_BLENDING_FACTOR1(BlendingFactor1) (((BlendingFactor1) == LTDC_BLENDING_FACTOR1_CA) || \
+ ((BlendingFactor1) == LTDC_BLENDING_FACTOR1_PAxCA))
+#define IS_LTDC_BLENDING_FACTOR2(BlendingFactor2) (((BlendingFactor2) == LTDC_BLENDING_FACTOR2_CA) || \
+ ((BlendingFactor2) == LTDC_BLENDING_FACTOR2_PAxCA))
+#define IS_LTDC_PIXEL_FORMAT(Pixelformat) (((Pixelformat) == LTDC_PIXEL_FORMAT_ARGB8888) || ((Pixelformat) == LTDC_PIXEL_FORMAT_RGB888) || \
+ ((Pixelformat) == LTDC_PIXEL_FORMAT_RGB565) || ((Pixelformat) == LTDC_PIXEL_FORMAT_ARGB1555) || \
+ ((Pixelformat) == LTDC_PIXEL_FORMAT_ARGB4444) || ((Pixelformat) == LTDC_PIXEL_FORMAT_L8) || \
+ ((Pixelformat) == LTDC_PIXEL_FORMAT_AL44) || ((Pixelformat) == LTDC_PIXEL_FORMAT_AL88))
+#define IS_LTDC_ALPHA(ALPHA) ((ALPHA) <= LTDC_ALPHA)
+#define IS_LTDC_HCONFIGST(HCONFIGST) ((HCONFIGST) <= LTDC_STARTPOSITION)
+#define IS_LTDC_HCONFIGSP(HCONFIGSP) ((HCONFIGSP) <= LTDC_STOPPOSITION)
+#define IS_LTDC_VCONFIGST(VCONFIGST) ((VCONFIGST) <= LTDC_STARTPOSITION)
+#define IS_LTDC_VCONFIGSP(VCONFIGSP) ((VCONFIGSP) <= LTDC_STOPPOSITION)
+#define IS_LTDC_CFBP(CFBP) ((CFBP) <= LTDC_COLOR_FRAME_BUFFER)
+#define IS_LTDC_CFBLL(CFBLL) ((CFBLL) <= LTDC_COLOR_FRAME_BUFFER)
+#define IS_LTDC_CFBLNBR(CFBLNBR) ((CFBLNBR) <= LTDC_LINE_NUMBER)
+#define IS_LTDC_LIPOS(LIPOS) ((LIPOS) <= 0x7FF)
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup LTDC_Private_Functions LTDC Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F429xx || STM32F439xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_LTDC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_nand.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,316 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_nand.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of NAND HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_NAND_H
+#define __STM32F4xx_HAL_NAND_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+ #include "stm32f4xx_ll_fsmc.h"
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+ #include "stm32f4xx_ll_fmc.h"
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup NAND
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx)
+
+/* Exported typedef ----------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup NAND_Exported_Types NAND Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL NAND State structures definition
+ */
+typedef enum
+{
+ HAL_NAND_STATE_RESET = 0x00, /*!< NAND not yet initialized or disabled */
+ HAL_NAND_STATE_READY = 0x01, /*!< NAND initialized and ready for use */
+ HAL_NAND_STATE_BUSY = 0x02, /*!< NAND internal process is ongoing */
+ HAL_NAND_STATE_ERROR = 0x03 /*!< NAND error state */
+}HAL_NAND_StateTypeDef;
+
+/**
+ * @brief NAND Memory electronic signature Structure definition
+ */
+typedef struct
+{
+ /*<! NAND memory electronic signature maker and device IDs */
+
+ uint8_t Maker_Id;
+
+ uint8_t Device_Id;
+
+ uint8_t Third_Id;
+
+ uint8_t Fourth_Id;
+}NAND_IDTypeDef;
+
+/**
+ * @brief NAND Memory address Structure definition
+ */
+typedef struct
+{
+ uint16_t Page; /*!< NAND memory Page address */
+
+ uint16_t Zone; /*!< NAND memory Zone address */
+
+ uint16_t Block; /*!< NAND memory Block address */
+
+}NAND_AddressTypeDef;
+
+/**
+ * @brief NAND Memory info Structure definition
+ */
+typedef struct
+{
+ uint32_t PageSize; /*!< NAND memory page (without spare area) size measured in K. bytes */
+
+ uint32_t SpareAreaSize; /*!< NAND memory spare area size measured in K. bytes */
+
+ uint32_t BlockSize; /*!< NAND memory block size number of pages */
+
+ uint32_t BlockNbr; /*!< NAND memory number of blocks */
+
+ uint32_t ZoneSize; /*!< NAND memory zone size measured in number of blocks */
+}NAND_InfoTypeDef;
+
+/**
+ * @brief NAND handle Structure definition
+ */
+typedef struct
+{
+ FMC_NAND_TypeDef *Instance; /*!< Register base address */
+
+ FMC_NAND_InitTypeDef Init; /*!< NAND device control configuration parameters */
+
+ HAL_LockTypeDef Lock; /*!< NAND locking object */
+
+ __IO HAL_NAND_StateTypeDef State; /*!< NAND device access state */
+
+ NAND_InfoTypeDef Info; /*!< NAND characteristic information structure */
+}NAND_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup NAND_Exported_Macros NAND Exported Macros
+ * @{
+ */
+
+/** @brief Reset NAND handle state
+ * @param __HANDLE__: specifies the NAND handle.
+ * @retval None
+ */
+#define __HAL_NAND_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NAND_STATE_RESET)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup NAND_Exported_Functions NAND Exported Functions
+ * @{
+ */
+
+/** @addtogroup NAND_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing);
+HAL_StatusTypeDef HAL_NAND_DeInit(NAND_HandleTypeDef *hnand);
+void HAL_NAND_MspInit(NAND_HandleTypeDef *hnand);
+void HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand);
+void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand);
+void HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand);
+
+/**
+ * @}
+ */
+
+/** @addtogroup NAND_Exported_Functions_Group2 Input and Output functions
+ * @{
+ */
+
+/* IO operation functions ****************************************************/
+HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID);
+HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand);
+HAL_StatusTypeDef HAL_NAND_Read_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToRead);
+HAL_StatusTypeDef HAL_NAND_Write_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToWrite);
+HAL_StatusTypeDef HAL_NAND_Read_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaToRead);
+HAL_StatusTypeDef HAL_NAND_Write_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaTowrite);
+HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress);
+uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand);
+uint32_t HAL_NAND_Address_Inc(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress);
+
+/**
+ * @}
+ */
+
+/** @addtogroup NAND_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+
+/* NAND Control functions ****************************************************/
+HAL_StatusTypeDef HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand);
+HAL_StatusTypeDef HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand);
+HAL_StatusTypeDef HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout);
+
+/**
+ * @}
+ */
+
+/** @addtogroup NAND_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+/* NAND State functions *******************************************************/
+HAL_NAND_StateTypeDef HAL_NAND_GetState(NAND_HandleTypeDef *hnand);
+uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup NAND_Private_Constants NAND Private Constants
+ * @{
+ */
+#define NAND_DEVICE1 ((uint32_t)0x70000000)
+#define NAND_DEVICE2 ((uint32_t)0x80000000)
+#define NAND_WRITE_TIMEOUT ((uint32_t)0x01000000)
+
+#define CMD_AREA ((uint32_t)(1<<16)) /* A16 = CLE high */
+#define ADDR_AREA ((uint32_t)(1<<17)) /* A17 = ALE high */
+
+#define NAND_CMD_AREA_A ((uint8_t)0x00)
+#define NAND_CMD_AREA_B ((uint8_t)0x01)
+#define NAND_CMD_AREA_C ((uint8_t)0x50)
+#define NAND_CMD_AREA_TRUE1 ((uint8_t)0x30)
+
+#define NAND_CMD_WRITE0 ((uint8_t)0x80)
+#define NAND_CMD_WRITE_TRUE1 ((uint8_t)0x10)
+#define NAND_CMD_ERASE0 ((uint8_t)0x60)
+#define NAND_CMD_ERASE1 ((uint8_t)0xD0)
+#define NAND_CMD_READID ((uint8_t)0x90)
+#define NAND_CMD_STATUS ((uint8_t)0x70)
+#define NAND_CMD_LOCK_STATUS ((uint8_t)0x7A)
+#define NAND_CMD_RESET ((uint8_t)0xFF)
+
+/* NAND memory status */
+#define NAND_VALID_ADDRESS ((uint32_t)0x00000100)
+#define NAND_INVALID_ADDRESS ((uint32_t)0x00000200)
+#define NAND_TIMEOUT_ERROR ((uint32_t)0x00000400)
+#define NAND_BUSY ((uint32_t)0x00000000)
+#define NAND_ERROR ((uint32_t)0x00000001)
+#define NAND_READY ((uint32_t)0x00000040)
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup NAND_Private_Macros NAND Private Macros
+ * @{
+ */
+
+/**
+ * @brief NAND memory address computation.
+ * @param __ADDRESS__: NAND memory address.
+ * @param __HANDLE__ : NAND handle.
+ * @retval NAND Raw address value
+ */
+#define ARRAY_ADDRESS(__ADDRESS__ , __HANDLE__) ((__ADDRESS__)->Page + \
+ (((__ADDRESS__)->Block + (((__ADDRESS__)->Zone) * ((__HANDLE__)->Info.ZoneSize)))* ((__HANDLE__)->Info.BlockSize)))
+
+/**
+ * @brief NAND memory address cycling.
+ * @param __ADDRESS__: NAND memory address.
+ * @retval NAND address cycling value.
+ */
+#define ADDR_1ST_CYCLE(__ADDRESS__) (uint8_t)(__ADDRESS__) /* 1st addressing cycle */
+#define ADDR_2ND_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 8) /* 2nd addressing cycle */
+#define ADDR_3RD_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 16) /* 3rd addressing cycle */
+#define ADDR_4TH_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 24) /* 4th addressing cycle */
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+ STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
+ STM32F446xx */
+
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_NAND_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_nor.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,301 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_nor.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of NOR HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_NOR_H
+#define __STM32F4xx_HAL_NOR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+ #include "stm32f4xx_ll_fsmc.h"
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+ #include "stm32f4xx_ll_fmc.h"
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup NOR
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx)
+
+/* Exported typedef ----------------------------------------------------------*/
+/** @defgroup NOR_Exported_Types NOR Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL SRAM State structures definition
+ */
+typedef enum
+{
+ HAL_NOR_STATE_RESET = 0x00, /*!< NOR not yet initialized or disabled */
+ HAL_NOR_STATE_READY = 0x01, /*!< NOR initialized and ready for use */
+ HAL_NOR_STATE_BUSY = 0x02, /*!< NOR internal processing is ongoing */
+ HAL_NOR_STATE_ERROR = 0x03, /*!< NOR error state */
+ HAL_NOR_STATE_PROTECTED = 0x04 /*!< NOR NORSRAM device write protected */
+}HAL_NOR_StateTypeDef;
+
+/**
+ * @brief FMC NOR Status typedef
+ */
+typedef enum
+{
+ HAL_NOR_STATUS_SUCCESS = 0,
+ HAL_NOR_STATUS_ONGOING,
+ HAL_NOR_STATUS_ERROR,
+ HAL_NOR_STATUS_TIMEOUT
+}HAL_NOR_StatusTypeDef;
+
+/**
+ * @brief FMC NOR ID typedef
+ */
+typedef struct
+{
+ uint16_t Manufacturer_Code; /*!< Defines the device's manufacturer code used to identify the memory */
+
+ uint16_t Device_Code1;
+
+ uint16_t Device_Code2;
+
+ uint16_t Device_Code3; /*!< Defines the device's codes used to identify the memory.
+ These codes can be accessed by performing read operations with specific
+ control signals and addresses set.They can also be accessed by issuing
+ an Auto Select command */
+}NOR_IDTypeDef;
+
+/**
+ * @brief FMC NOR CFI typedef
+ */
+typedef struct
+{
+ /*!< Defines the information stored in the memory's Common flash interface
+ which contains a description of various electrical and timing parameters,
+ density information and functions supported by the memory */
+
+ uint16_t CFI_1;
+
+ uint16_t CFI_2;
+
+ uint16_t CFI_3;
+
+ uint16_t CFI_4;
+}NOR_CFITypeDef;
+
+/**
+ * @brief NOR handle Structure definition
+ */
+typedef struct
+{
+ FMC_NORSRAM_TypeDef *Instance; /*!< Register base address */
+
+ FMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */
+
+ FMC_NORSRAM_InitTypeDef Init; /*!< NOR device control configuration parameters */
+
+ HAL_LockTypeDef Lock; /*!< NOR locking object */
+
+ __IO HAL_NOR_StateTypeDef State; /*!< NOR device access state */
+
+}NOR_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup NOR_Exported_Macros NOR Exported Macros
+ * @{
+ */
+/** @brief Reset NOR handle state
+ * @param __HANDLE__: specifies the NOR handle.
+ * @retval None
+ */
+#define __HAL_NOR_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NOR_STATE_RESET)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup NOR_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup NOR_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming);
+HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/** @addtogroup NOR_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ***************************************************/
+HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID);
+HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor);
+HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData);
+HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData);
+
+HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize);
+HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize);
+
+HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address);
+HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address);
+HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI);
+/**
+ * @}
+ */
+
+/** @addtogroup NOR_Exported_Functions_Group3
+ * @{
+ */
+/* NOR Control functions *****************************************************/
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor);
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor);
+/**
+ * @}
+ */
+
+/** @addtogroup NOR_Exported_Functions_Group4
+ * @{
+ */
+/* NOR State functions ********************************************************/
+HAL_NOR_StateTypeDef HAL_NOR_GetState(NOR_HandleTypeDef *hnor);
+HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup NOR_Private_Constants NOR Private Constants
+ * @{
+ */
+/* NOR device IDs addresses */
+#define MC_ADDRESS ((uint16_t)0x0000)
+#define DEVICE_CODE1_ADDR ((uint16_t)0x0001)
+#define DEVICE_CODE2_ADDR ((uint16_t)0x000E)
+#define DEVICE_CODE3_ADDR ((uint16_t)0x000F)
+
+/* NOR CFI IDs addresses */
+#define CFI1_ADDRESS ((uint16_t)0x61)
+#define CFI2_ADDRESS ((uint16_t)0x62)
+#define CFI3_ADDRESS ((uint16_t)0x63)
+#define CFI4_ADDRESS ((uint16_t)0x64)
+
+/* NOR operation wait timeout */
+#define NOR_TMEOUT ((uint16_t)0xFFFF)
+
+/* NOR memory data width */
+#define NOR_MEMORY_8B ((uint8_t)0x0)
+#define NOR_MEMORY_16B ((uint8_t)0x1)
+
+/* NOR memory device read/write start address */
+#define NOR_MEMORY_ADRESS1 ((uint32_t)0x60000000)
+#define NOR_MEMORY_ADRESS2 ((uint32_t)0x64000000)
+#define NOR_MEMORY_ADRESS3 ((uint32_t)0x68000000)
+#define NOR_MEMORY_ADRESS4 ((uint32_t)0x6C000000)
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup NOR_Private_Macros NOR Private Macros
+ * @{
+ */
+/**
+ * @brief NOR memory address shifting.
+ * @param __NOR_ADDRESS__: NOR base address
+ * @param NOR_MEMORY_WIDTH: NOR memory width
+ * @param ADDRESS: NOR memory address
+ * @retval NOR shifted address value
+ */
+#define NOR_ADDR_SHIFT(__NOR_ADDRESS__, NOR_MEMORY_WIDTH, ADDRESS) (uint32_t)(((NOR_MEMORY_WIDTH) == NOR_MEMORY_8B)? ((uint32_t)((__NOR_ADDRESS__) + (2 * (ADDRESS)))):\
+ ((uint32_t)((__NOR_ADDRESS__) + (ADDRESS))))
+
+/**
+ * @brief NOR memory write data to specified address.
+ * @param ADDRESS: NOR memory address
+ * @param DATA: Data to write
+ * @retval None
+ */
+#define NOR_WRITE(ADDRESS, DATA) (*(__IO uint16_t *)((uint32_t)(ADDRESS)) = (DATA))
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+ STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
+ STM32F446xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_NOR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_pccard.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,267 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pccard.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of PCCARD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PCCARD_H
+#define __STM32F4xx_HAL_PCCARD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+ #include "stm32f4xx_ll_fsmc.h"
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+ #include "stm32f4xx_ll_fmc.h"
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/** @addtogroup PCCARD
+ * @{
+ */
+
+/* Exported typedef ----------------------------------------------------------*/
+/** @defgroup PCCARD_Exported_Types PCCARD Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL PCCARD State structures definition
+ */
+typedef enum
+{
+ HAL_PCCARD_STATE_RESET = 0x00, /*!< PCCARD peripheral not yet initialized or disabled */
+ HAL_PCCARD_STATE_READY = 0x01, /*!< PCCARD peripheral ready */
+ HAL_PCCARD_STATE_BUSY = 0x02, /*!< PCCARD peripheral busy */
+ HAL_PCCARD_STATE_ERROR = 0x04 /*!< PCCARD peripheral error */
+}HAL_PCCARD_StateTypeDef;
+
+typedef enum
+{
+ HAL_PCCARD_STATUS_SUCCESS = 0,
+ HAL_PCCARD_STATUS_ONGOING,
+ HAL_PCCARD_STATUS_ERROR,
+ HAL_PCCARD_STATUS_TIMEOUT
+}HAL_PCCARD_StatusTypeDef;
+
+/**
+ * @brief FMC_PCCARD handle Structure definition
+ */
+typedef struct
+{
+ FMC_PCCARD_TypeDef *Instance; /*!< Register base address for PCCARD device */
+
+ FMC_PCCARD_InitTypeDef Init; /*!< PCCARD device control configuration parameters */
+
+ __IO HAL_PCCARD_StateTypeDef State; /*!< PCCARD device access state */
+
+ HAL_LockTypeDef Lock; /*!< PCCARD Lock */
+
+}PCCARD_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PCCARD_Exported_Macros PCCARD Exported Macros
+ * @{
+ */
+/** @brief Reset PCCARD handle state
+ * @param __HANDLE__: specifies the PCCARD handle.
+ * @retval None
+ */
+#define __HAL_PCCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_PCCARD_STATE_RESET)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCCARD_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup PCCARD_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_PCCARD_Init(PCCARD_HandleTypeDef *hpccard, FMC_NAND_PCC_TimingTypeDef *ComSpaceTiming, FMC_NAND_PCC_TimingTypeDef *AttSpaceTiming, FMC_NAND_PCC_TimingTypeDef *IOSpaceTiming);
+HAL_StatusTypeDef HAL_PCCARD_DeInit(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_MspInit(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_MspDeInit(PCCARD_HandleTypeDef *hpccard);
+/**
+ * @}
+ */
+
+/** @addtogroup PCCARD_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_PCCARD_Read_ID(PCCARD_HandleTypeDef *hpccard, uint8_t CompactFlash_ID[], uint8_t *pStatus);
+HAL_StatusTypeDef HAL_PCCARD_Write_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, uint8_t *pStatus);
+HAL_StatusTypeDef HAL_PCCARD_Read_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, uint8_t *pStatus);
+HAL_StatusTypeDef HAL_PCCARD_Erase_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t SectorAddress, uint8_t *pStatus);
+HAL_StatusTypeDef HAL_PCCARD_Reset(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_IRQHandler(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_ITCallback(PCCARD_HandleTypeDef *hpccard);
+
+/**
+ * @}
+ */
+
+/** @addtogroup PCCARD_Exported_Functions_Group3
+ * @{
+ */
+/* PCCARD State functions *******************************************************/
+HAL_PCCARD_StateTypeDef HAL_PCCARD_GetState(PCCARD_HandleTypeDef *hpccard);
+HAL_PCCARD_StatusTypeDef HAL_PCCARD_GetStatus(PCCARD_HandleTypeDef *hpccard);
+HAL_PCCARD_StatusTypeDef HAL_PCCARD_ReadStatus(PCCARD_HandleTypeDef *hpccard);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup PCCARD_Private_Constants PCCARD Private Constants
+ * @{
+ */
+#define PCCARD_DEVICE_ADDRESS ((uint32_t)0x90000000)
+#define PCCARD_ATTRIBUTE_SPACE_ADDRESS ((uint32_t)0x98000000) /* Attribute space size to @0x9BFF FFFF */
+#define PCCARD_COMMON_SPACE_ADDRESS PCCARD_DEVICE_ADDRESS /* Common space size to @0x93FF FFFF */
+#define PCCARD_IO_SPACE_ADDRESS ((uint32_t)0x9C000000) /* IO space size to @0x9FFF FFFF */
+#define PCCARD_IO_SPACE_PRIMARY_ADDR ((uint32_t)0x9C0001F0) /* IO space size to @0x9FFF FFFF */
+
+/* Flash-ATA registers description */
+#define ATA_DATA ((uint8_t)0x00) /* Data register */
+#define ATA_SECTOR_COUNT ((uint8_t)0x02) /* Sector Count register */
+#define ATA_SECTOR_NUMBER ((uint8_t)0x03) /* Sector Number register */
+#define ATA_CYLINDER_LOW ((uint8_t)0x04) /* Cylinder low register */
+#define ATA_CYLINDER_HIGH ((uint8_t)0x05) /* Cylinder high register */
+#define ATA_CARD_HEAD ((uint8_t)0x06) /* Card/Head register */
+#define ATA_STATUS_CMD ((uint8_t)0x07) /* Status(read)/Command(write) register */
+#define ATA_STATUS_CMD_ALTERNATE ((uint8_t)0x0E) /* Alternate Status(read)/Command(write) register */
+#define ATA_COMMON_DATA_AREA ((uint16_t)0x0400) /* Start of data area (for Common access only!) */
+#define ATA_CARD_CONFIGURATION ((uint16_t)0x0202) /* Card Configuration and Status Register */
+
+/* Flash-ATA commands */
+#define ATA_READ_SECTOR_CMD ((uint8_t)0x20)
+#define ATA_WRITE_SECTOR_CMD ((uint8_t)0x30)
+#define ATA_ERASE_SECTOR_CMD ((uint8_t)0xC0)
+#define ATA_IDENTIFY_CMD ((uint8_t)0xEC)
+
+/* PC Card/Compact Flash status */
+#define PCCARD_TIMEOUT_ERROR ((uint8_t)0x60)
+#define PCCARD_BUSY ((uint8_t)0x80)
+#define PCCARD_PROGR ((uint8_t)0x01)
+#define PCCARD_READY ((uint8_t)0x40)
+
+#define PCCARD_SECTOR_SIZE ((uint32_t)255) /* In half words */
+
+/**
+ * @}
+ */
+/* Compact Flash redefinition */
+#define HAL_CF_Init HAL_PCCARD_Init
+#define HAL_CF_DeInit HAL_PCCARD_DeInit
+#define HAL_CF_MspInit HAL_PCCARD_MspInit
+#define HAL_CF_MspDeInit HAL_PCCARD_MspDeInit
+
+#define HAL_CF_Read_ID HAL_PCCARD_Read_ID
+#define HAL_CF_Write_Sector HAL_PCCARD_Write_Sector
+#define HAL_CF_Read_Sector HAL_PCCARD_Read_Sector
+#define HAL_CF_Erase_Sector HAL_PCCARD_Erase_Sector
+#define HAL_CF_Reset HAL_PCCARD_Reset
+#define HAL_CF_IRQHandler HAL_PCCARD_IRQHandler
+#define HAL_CF_ITCallback HAL_PCCARD_ITCallback
+
+#define HAL_CF_GetState HAL_PCCARD_GetState
+#define HAL_CF_GetStatus HAL_PCCARD_GetStatus
+#define HAL_CF_ReadStatus HAL_PCCARD_ReadStatus
+
+#define HAL_CF_STATUS_SUCCESS HAL_PCCARD_STATUS_SUCCESS
+#define HAL_CF_STATUS_ONGOING HAL_PCCARD_STATUS_ONGOING
+#define HAL_CF_STATUS_ERROR HAL_PCCARD_STATUS_ERROR
+#define HAL_CF_STATUS_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT
+#define HAL_CF_StatusTypeDef HAL_PCCARD_StatusTypeDef
+
+
+#define CF_DEVICE_ADDRESS PCCARD_DEVICE_ADDRESS
+#define CF_ATTRIBUTE_SPACE_ADDRESS PCCARD_ATTRIBUTE_SPACE_ADDRESS
+#define CF_COMMON_SPACE_ADDRESS PCCARD_COMMON_SPACE_ADDRESS
+#define CF_IO_SPACE_ADDRESS PCCARD_IO_SPACE_ADDRESS
+#define CF_IO_SPACE_PRIMARY_ADDR PCCARD_IO_SPACE_PRIMARY_ADDR
+
+#define CF_TIMEOUT_ERROR PCCARD_TIMEOUT_ERROR
+#define CF_BUSY PCCARD_BUSY
+#define CF_PROGR PCCARD_PROGR
+#define CF_READY PCCARD_READY
+
+#define CF_SECTOR_SIZE PCCARD_SECTOR_SIZE
+
+/* Private macros ------------------------------------------------------------*/
+/**
+ * @}
+ */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
+ STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_PCCARD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_pcd.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,322 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pcd.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of PCD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PCD_H
+#define __STM32F4xx_HAL_PCD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_usb.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup PCD_Exported_Types PCD Exported Types
+ * @{
+ */
+
+/**
+ * @brief PCD State structure definition
+ */
+typedef enum
+{
+ HAL_PCD_STATE_RESET = 0x00,
+ HAL_PCD_STATE_READY = 0x01,
+ HAL_PCD_STATE_ERROR = 0x02,
+ HAL_PCD_STATE_BUSY = 0x03,
+ HAL_PCD_STATE_TIMEOUT = 0x04
+} PCD_StateTypeDef;
+
+#ifdef USB_OTG_GLPMCFG_LPMEN
+/* Device LPM suspend state */
+typedef enum
+{
+ LPM_L0 = 0x00, /* on */
+ LPM_L1 = 0x01, /* LPM L1 sleep */
+ LPM_L2 = 0x02, /* suspend */
+ LPM_L3 = 0x03, /* off */
+}PCD_LPM_StateTypeDef;
+#endif /* USB_OTG_GLPMCFG_LPMEN */
+
+typedef USB_OTG_GlobalTypeDef PCD_TypeDef;
+typedef USB_OTG_CfgTypeDef PCD_InitTypeDef;
+typedef USB_OTG_EPTypeDef PCD_EPTypeDef ;
+
+/**
+ * @brief PCD Handle Structure definition
+ */
+typedef struct
+{
+ PCD_TypeDef *Instance; /*!< Register base address */
+ PCD_InitTypeDef Init; /*!< PCD required parameters */
+ PCD_EPTypeDef IN_ep[15]; /*!< IN endpoint parameters */
+ PCD_EPTypeDef OUT_ep[15]; /*!< OUT endpoint parameters */
+ HAL_LockTypeDef Lock; /*!< PCD peripheral status */
+ __IO PCD_StateTypeDef State; /*!< PCD communication state */
+ uint32_t Setup[12]; /*!< Setup packet buffer */
+#ifdef USB_OTG_GLPMCFG_LPMEN
+ PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */
+ uint32_t BESL;
+ uint32_t lpm_active; /*!< Enable or disable the Link Power Management .
+ This parameter can be set to ENABLE or DISABLE */
+#endif /* USB_OTG_GLPMCFG_LPMEN */
+ void *pData; /*!< Pointer to upper stack Handler */
+} PCD_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Include PCD HAL Extension module */
+#include "stm32f4xx_hal_pcd_ex.h"
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PCD_Exported_Constants PCD Exported Constants
+ * @{
+ */
+
+/** @defgroup PCD_Speed PCD Speed
+ * @{
+ */
+#define PCD_SPEED_HIGH 0
+#define PCD_SPEED_HIGH_IN_FULL 1
+#define PCD_SPEED_FULL 2
+/**
+ * @}
+ */
+
+/** @defgroup PCD_PHY_Module PCD PHY Module
+ * @{
+ */
+#define PCD_PHY_ULPI 1
+#define PCD_PHY_EMBEDDED 2
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup PCD_Exported_Macros PCD Exported Macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+#define __HAL_PCD_ENABLE(__HANDLE__) USB_EnableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_PCD_DISABLE(__HANDLE__) USB_DisableGlobalInt ((__HANDLE__)->Instance)
+
+#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__))
+#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0)
+
+
+#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= \
+ ~(USB_OTG_PCGCCTL_STOPCLK)
+
+#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK
+
+#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE))&0x10)
+
+#define USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE ((uint32_t)0x08)
+#define USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE ((uint32_t)0x0C)
+#define USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE ((uint32_t)0x10)
+
+#define USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE ((uint32_t)0x08)
+#define USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE ((uint32_t)0x0C)
+#define USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE ((uint32_t)0x10)
+
+#define USB_OTG_HS_WAKEUP_EXTI_LINE ((uint32_t)0x00100000) /*!< External interrupt line 20 Connected to the USB HS EXTI Line */
+#define USB_OTG_FS_WAKEUP_EXTI_LINE ((uint32_t)0x00040000) /*!< External interrupt line 18 Connected to the USB FS EXTI Line */
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= (USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = (USB_OTG_HS_WAKEUP_EXTI_LINE)
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE() EXTI->FTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE() EXTI->FTSR |= (USB_OTG_HS_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE)
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE() EXTI->RTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\
+ EXTI->FTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE;)\
+ EXTI->RTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE;\
+ EXTI->FTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= USB_OTG_FS_WAKEUP_EXTI_LINE)
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_OTG_FS_WAKEUP_EXTI_LINE
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_FS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = USB_OTG_FS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE() EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE
+
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE() EXTI->FTSR |= (USB_OTG_FS_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE)
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE() EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+ EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE;\
+ EXTI->FTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= USB_OTG_FS_WAKEUP_EXTI_LINE)
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCD_Exported_Functions PCD Exported Functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions ********************************/
+/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/* I/O operation functions ***************************************************/
+/* Non-Blocking mode: Interrupt */
+/** @addtogroup PCD_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
+
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/* Peripheral Control functions **********************************************/
+/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/* Peripheral State functions ************************************************/
+/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup PCD_Instance_definition PCD Instance definition
+ * @{
+ */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) ||\
+ defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+ #define IS_PCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS) || \
+ ((INSTANCE) == USB_OTG_HS))
+#elif defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+ #define IS_PCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS))
+#endif
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_pcd_ex.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,105 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pcd_ex.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of PCD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PCD_EX_H
+#define __STM32F4xx_HAL_PCD_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCDEx
+ * @{
+ */
+/* Exported types ------------------------------------------------------------*/
+#if defined(STM32F446xx)
+typedef enum
+{
+ PCD_LPM_L0_ACTIVE = 0x00, /* on */
+ PCD_LPM_L1_ACTIVE = 0x01, /* LPM L1 sleep */
+}PCD_LPM_MsgTypeDef;
+#endif /* STM32F446xx */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros -----------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions
+ * @{
+ */
+/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size);
+HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size);
+#if defined(STM32F446xx)
+HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd);
+void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg);
+#endif /* STM32F446xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PCD_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_pwr.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,484 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pwr.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of PWR HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PWR_H
+#define __STM32F4xx_HAL_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWR
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Types PWR Exported Types
+ * @{
+ */
+
+/**
+ * @brief PWR PVD configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level.
+ This parameter can be a value of @ref PWR_PVD_detection_level */
+
+ uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref PWR_PVD_Mode */
+}PWR_PVDTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWR_Exported_Constants PWR Exported Constants
+ * @{
+ */
+
+/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins
+ * @{
+ */
+#define PWR_WAKEUP_PIN1 ((uint32_t)0x00000100)
+#define PWR_WAKEUP_PIN2 ((uint32_t)0x00000080)
+/**
+ * @}
+ */
+
+/** @defgroup PWR_PVD_detection_level PWR PVD detection level
+ * @{
+ */
+#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0
+#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1
+#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2
+#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3
+#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4
+#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5
+#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6
+#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7/* External input analog voltage
+ (Compare internally to VREFINT) */
+/**
+ * @}
+ */
+
+/** @defgroup PWR_PVD_Mode PWR PVD Mode
+ * @{
+ */
+#define PWR_PVD_MODE_NORMAL ((uint32_t)0x00000000) /*!< basic mode is used */
+#define PWR_PVD_MODE_IT_RISING ((uint32_t)0x00010001) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_IT_FALLING ((uint32_t)0x00010002) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_IT_RISING_FALLING ((uint32_t)0x00010003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING ((uint32_t)0x00020001) /*!< Event Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_EVENT_FALLING ((uint32_t)0x00020002) /*!< Event Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003) /*!< Event Mode with Rising/Falling edge trigger detection */
+/**
+ * @}
+ */
+
+
+/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode
+ * @{
+ */
+#define PWR_MAINREGULATOR_ON ((uint32_t)0x00000000)
+#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS
+/**
+ * @}
+ */
+
+/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
+ * @{
+ */
+#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01)
+#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02)
+/**
+ * @}
+ */
+
+/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
+ * @{
+ */
+#define PWR_STOPENTRY_WFI ((uint8_t)0x01)
+#define PWR_STOPENTRY_WFE ((uint8_t)0x02)
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Flag PWR Flag
+ * @{
+ */
+#define PWR_FLAG_WU PWR_CSR_WUF
+#define PWR_FLAG_SB PWR_CSR_SBF
+#define PWR_FLAG_PVDO PWR_CSR_PVDO
+#define PWR_FLAG_BRR PWR_CSR_BRR
+#define PWR_FLAG_VOSRDY PWR_CSR_VOSRDY
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWR_Exported_Macro PWR Exported Macro
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F17xx)
+/** @brief macros configure the main internal regulator output voltage.
+ * @param __REGULATOR__: specifies the regulator output voltage to achieve
+ * a tradeoff between performance and power consumption when the device does
+ * not operate at the maximum frequency (refer to the datasheets for more details).
+ * This parameter can be one of the following values:
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
+ * @retval None
+ */
+#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \
+ __IO uint32_t tmpreg; \
+ MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \
+ UNUSED(tmpreg); \
+ } while(0)
+#else
+/** @brief macros configure the main internal regulator output voltage.
+ * @param __REGULATOR__: specifies the regulator output voltage to achieve
+ * a tradeoff between performance and power consumption when the device does
+ * not operate at the maximum frequency (refer to the datasheets for more details).
+ * This parameter can be one of the following values:
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
+ * @retval None
+ */
+#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \
+ __IO uint32_t tmpreg; \
+ MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \
+ UNUSED(tmpreg); \
+ } while(0)
+#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */
+
+/** @brief Check PWR flag is set or not.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
+ * was received from the WKUP pin or from the RTC alarm (Alarm A
+ * or Alarm B), RTC Tamper event, RTC TimeStamp event or RTC Wakeup.
+ * An additional wakeup event is detected if the WKUP pin is enabled
+ * (by setting the EWUP bit) when the WKUP pin level is already high.
+ * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
+ * resumed from StandBy mode.
+ * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
+ * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
+ * For this reason, this bit is equal to 0 after Standby or reset
+ * until the PVDE bit is set.
+ * @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset
+ * when the device wakes up from Standby mode or by a system reset
+ * or power reset.
+ * @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage
+ * scaling output selection is ready.
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the PWR's pending flags.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag
+ * @arg PWR_FLAG_SB: StandBy flag
+ */
+#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2)
+
+/**
+ * @brief Enable the PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Disable the PVD EXTI Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Enable event on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Disable event on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Enable the PVD Extended Interrupt Rising Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief Disable the PVD Extended Interrupt Rising Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief Enable the PVD Extended Interrupt Falling Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+
+/**
+ * @brief Disable the PVD Extended Interrupt Falling Trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD)
+
+
+/**
+ * @brief PVD EXTI line configuration: set rising & falling edge trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
+
+/**
+ * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
+ * This parameter can be:
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
+
+/**
+ * @brief checks whether the specified PVD Exti interrupt flag is set or not.
+ * @retval EXTI PVD Line Status.
+ */
+#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Clear the PVD Exti flag.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Generates a Software interrupt on PVD EXTI line.
+ * @retval None
+ */
+#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @}
+ */
+
+/* Include PWR HAL Extension module */
+#include "stm32f4xx_hal_pwr_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PWR_Exported_Functions PWR Exported Functions
+ * @{
+ */
+
+/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+void HAL_PWR_DeInit(void);
+void HAL_PWR_EnableBkUpAccess(void);
+void HAL_PWR_DisableBkUpAccess(void);
+/**
+ * @}
+ */
+
+/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
+ * @{
+ */
+/* Peripheral Control functions **********************************************/
+/* PVD configuration */
+void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
+void HAL_PWR_EnablePVD(void);
+void HAL_PWR_DisablePVD(void);
+
+/* WakeUp pins configuration */
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
+
+/* Low Power modes entry */
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
+void HAL_PWR_EnterSTANDBYMode(void);
+
+/* Power PVD IRQ Handler */
+void HAL_PWR_PVD_IRQHandler(void);
+void HAL_PWR_PVDCallback(void);
+
+/* Cortex System Control functions *******************************************/
+void HAL_PWR_EnableSleepOnExit(void);
+void HAL_PWR_DisableSleepOnExit(void);
+void HAL_PWR_EnableSEVOnPend(void);
+void HAL_PWR_DisableSEVOnPend(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup PWR_Private_Constants PWR Private Constants
+ * @{
+ */
+
+/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line
+ * @{
+ */
+#define PWR_EXTI_LINE_PVD ((uint32_t)EXTI_IMR_MR16) /*!< External interrupt line 16 Connected to the PVD EXTI Line */
+/**
+ * @}
+ */
+
+/** @defgroup PWR_register_alias_address PWR Register alias address
+ * @{
+ */
+/* ------------- PWR registers bit address in the alias region ---------------*/
+#define PWR_OFFSET (PWR_BASE - PERIPH_BASE)
+#define PWR_CR_OFFSET 0x00
+#define PWR_CSR_OFFSET 0x04
+#define PWR_CR_OFFSET_BB (PWR_OFFSET + PWR_CR_OFFSET)
+#define PWR_CSR_OFFSET_BB (PWR_OFFSET + PWR_CSR_OFFSET)
+/**
+ * @}
+ */
+
+/** @defgroup PWR_CR_register_alias PWR CR Register alias address
+ * @{
+ */
+/* --- CR Register ---*/
+/* Alias word address of DBP bit */
+#define DBP_BIT_NUMBER POSITION_VAL(PWR_CR_DBP)
+#define CR_DBP_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (DBP_BIT_NUMBER * 4))
+
+/* Alias word address of PVDE bit */
+#define PVDE_BIT_NUMBER POSITION_VAL(PWR_CR_PVDE)
+#define CR_PVDE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (PVDE_BIT_NUMBER * 4))
+
+/* Alias word address of PMODE bit */
+#define PMODE_BIT_NUMBER POSITION_VAL(PWR_CR_PMODE)
+#define CR_PMODE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (PMODE_BIT_NUMBER * 4))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_CSR_register_alias PWR CSR Register alias address
+ * @{
+ */
+/* --- CSR Register ---*/
+/* Alias word address of EWUP bit */
+#define EWUP_BIT_NUMBER POSITION_VAL(PWR_CSR_EWUP)
+#define CSR_EWUP_BB (PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32) + (EWUP_BIT_NUMBER * 4))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PWR_Private_Macros PWR Private Macros
+ * @{
+ */
+
+/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters
+ * @{
+ */
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2))
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
+ ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
+ ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
+ ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
+#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
+ ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
+ ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
+ ((MODE) == PWR_PVD_MODE_NORMAL))
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
+ ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
+#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_pwr_ex.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,291 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pwr_ex.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of PWR HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PWR_EX_H
+#define __STM32F4xx_HAL_PWR_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWREx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
+ * @{
+ */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+
+/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode
+ * @{
+ */
+#define PWR_MAINREGULATOR_UNDERDRIVE_ON PWR_CR_MRUDS
+#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON ((uint32_t)(PWR_CR_LPDS | PWR_CR_LPUDS))
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag
+ * @{
+ */
+#define PWR_FLAG_ODRDY PWR_CSR_ODRDY
+#define PWR_FLAG_ODSWRDY PWR_CSR_ODSWRDY
+#define PWR_FLAG_UDRDY PWR_CSR_UDSWRDY
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+/** @defgroup PWR_Regulator_Voltage_Scale PWR Regulator Voltage Scale
+ * @{
+ */
+#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F17xx)
+#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK = 168 MHz. */
+#define PWR_REGULATOR_VOLTAGE_SCALE2 ((uint32_t)0x00000000) /* Scale 2 mode: the maximum value of fHCLK = 144 MHz. */
+#else
+#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK is 168 MHz. It can be extended to
+ 180 MHz by activating the over-drive mode. */
+#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR_VOS_1 /* Scale 2 mode: the maximum value of fHCLK is 144 MHz. It can be extended to
+ 168 MHz by activating the over-drive mode. */
+#define PWR_REGULATOR_VOLTAGE_SCALE3 PWR_CR_VOS_0 /* Scale 3 mode: the maximum value of fHCLK is 120 MHz. */
+#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+/** @brief Macros to enable or disable the Over drive mode.
+ * @note These macros can be used only for STM32F42xx/STM3243xx devices.
+ */
+#define __HAL_PWR_OVERDRIVE_ENABLE() (*(__IO uint32_t *) CR_ODEN_BB = ENABLE)
+#define __HAL_PWR_OVERDRIVE_DISABLE() (*(__IO uint32_t *) CR_ODEN_BB = DISABLE)
+
+/** @brief Macros to enable or disable the Over drive switching.
+ * @note These macros can be used only for STM32F42xx/STM3243xx devices.
+ */
+#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = ENABLE)
+#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = DISABLE)
+
+/** @brief Macros to enable or disable the Under drive mode.
+ * @note This mode is enabled only with STOP low power mode.
+ * In this mode, the 1.2V domain is preserved in reduced leakage mode. This
+ * mode is only available when the main regulator or the low power regulator
+ * is in low voltage mode.
+ * @note If the Under-drive mode was enabled, it is automatically disabled after
+ * exiting Stop mode.
+ * When the voltage regulator operates in Under-drive mode, an additional
+ * startup delay is induced when waking up from Stop mode.
+ */
+#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR |= (uint32_t)PWR_CR_UDEN)
+#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR &= (uint32_t)(~PWR_CR_UDEN))
+
+/** @brief Check PWR flag is set or not.
+ * @note These macros can be used only for STM32F42xx/STM3243xx devices.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode
+ * is ready
+ * @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode
+ * switching is ready
+ * @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode
+ * is enabled in Stop mode
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the Under-Drive Ready flag.
+ * @note These macros can be used only for STM32F42xx/STM3243xx devices.
+ */
+#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR |= PWR_FLAG_UDRDY)
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions
+ * @{
+ */
+
+/** @addtogroup PWREx_Exported_Functions_Group1
+ * @{
+ */
+void HAL_PWREx_EnableFlashPowerDown(void);
+void HAL_PWREx_DisableFlashPowerDown(void);
+HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void);
+HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void);
+uint32_t HAL_PWREx_GetVoltageRange(void);
+HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling);
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+void HAL_PWREx_EnableMainRegulatorLowVoltage(void);
+void HAL_PWREx_DisableMainRegulatorLowVoltage(void);
+void HAL_PWREx_EnableLowRegulatorLowVoltage(void);
+void HAL_PWREx_DisableLowRegulatorLowVoltage(void);
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void);
+HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void);
+HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup PWREx_Private_Constants PWREx Private Constants
+ * @{
+ */
+
+/** @defgroup PWREx_register_alias_address PWREx Register alias address
+ * @{
+ */
+/* ------------- PWR registers bit address in the alias region ---------------*/
+/* --- CR Register ---*/
+/* Alias word address of FPDS bit */
+#define FPDS_BIT_NUMBER POSITION_VAL(PWR_CR_FPDS)
+#define CR_FPDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (FPDS_BIT_NUMBER * 4))
+
+/* Alias word address of ODEN bit */
+#define ODEN_BIT_NUMBER POSITION_VAL(PWR_CR_ODEN)
+#define CR_ODEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (ODEN_BIT_NUMBER * 4))
+
+/* Alias word address of ODSWEN bit */
+#define ODSWEN_BIT_NUMBER POSITION_VAL(PWR_CR_ODSWEN)
+#define CR_ODSWEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (ODSWEN_BIT_NUMBER * 4))
+
+/* Alias word address of MRLVDS bit */
+#define MRLVDS_BIT_NUMBER POSITION_VAL(PWR_CR_MRLVDS)
+#define CR_MRLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (MRLVDS_BIT_NUMBER * 4))
+
+/* Alias word address of LPLVDS bit */
+#define LPLVDS_BIT_NUMBER POSITION_VAL(PWR_CR_LPLVDS)
+#define CR_LPLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (LPLVDS_BIT_NUMBER * 4))
+
+ /**
+ * @}
+ */
+
+/** @defgroup PWREx_CSR_register_alias PWRx CSR Register alias address
+ * @{
+ */
+/* --- CSR Register ---*/
+/* Alias word address of BRE bit */
+#define BRE_BIT_NUMBER POSITION_VAL(PWR_CSR_BRE)
+#define CSR_BRE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32) + (BRE_BIT_NUMBER * 4))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PWREx_Private_Macros PWREx Private Macros
+ * @{
+ */
+
+/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \
+ ((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F17xx)
+#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
+ ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2))
+#else
+#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
+ ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \
+ ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3))
+#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PWR_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_qspi.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,788 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_qspi.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of QSPI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_QSPI_H
+#define __STM32F4xx_HAL_QSPI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F446xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup QSPI
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup QSPI_Exported_Types QSPI Exported Types
+ * @{
+ */
+
+/**
+ * @brief QSPI Init structure definition
+ */
+
+typedef struct
+{
+ uint32_t ClockPrescaler; /* Specifies the prescaler factor for generating clock based on the AHB clock.
+ This parameter can be a number between 0 and 255 */
+
+ uint32_t FifoThreshold; /* Specifies the threshold number of bytes in the FIFO (used only in indirect mode)
+ This parameter can be a value between 1 and 32 */
+
+ uint32_t SampleShifting; /* Specifies the Sample Shift. The data is sampled 1/2 clock cycle delay later to
+ take in account external signal delays. (It should be QSPI_SAMPLE_SHIFTING_NONE in DDR mode)
+ This parameter can be a value of @ref QSPI_SampleShifting */
+
+ uint32_t FlashSize; /* Specifies the Flash Size. FlashSize+1 is effectively the number of address bits
+ required to address the flash memory. The flash capacity can be up to 4GB
+ (addressed using 32 bits) in indirect mode, but the addressable space in
+ memory-mapped mode is limited to 256MB
+ This parameter can be a number between 0 and 31 */
+
+ uint32_t ChipSelectHighTime; /* Specifies the Chip Select High Time. ChipSelectHighTime+1 defines the minimum number
+ of clock cycles which the chip select must remain high between commands.
+ This parameter can be a value of @ref QSPI_ChipSelectHighTime */
+
+ uint32_t ClockMode; /* Specifies the Clock Mode. It indicates the level that clock takes between commands.
+ This parameter can be a value of @ref QSPI_ClockMode */
+
+ uint32_t FlashID; /* Specifies the Flash which will be used,
+ This parameter can be a value of @ref QSPI_Flash_Select */
+
+ uint32_t DualFlash; /* Specifies the Dual Flash Mode State
+ This parameter can be a value of @ref QSPI_DualFlash_Mode */
+}QSPI_InitTypeDef;
+
+/**
+ * @brief HAL QSPI State structures definition
+ */
+typedef enum
+{
+ HAL_QSPI_STATE_RESET = 0x00, /*!< Peripheral not initialized */
+ HAL_QSPI_STATE_READY = 0x01, /*!< Peripheral initialized and ready for use */
+ HAL_QSPI_STATE_BUSY = 0x02, /*!< Peripheral in indirect mode and busy */
+ HAL_QSPI_STATE_BUSY_INDIRECT_TX = 0x12, /*!< Peripheral in indirect mode with transmission ongoing */
+ HAL_QSPI_STATE_BUSY_INDIRECT_RX = 0x22, /*!< Peripheral in indirect mode with reception ongoing */
+ HAL_QSPI_STATE_BUSY_AUTO_POLLING = 0x42, /*!< Peripheral in auto polling mode ongoing */
+ HAL_QSPI_STATE_BUSY_MEM_MAPPED = 0x82, /*!< Peripheral in memory mapped mode ongoing */
+ HAL_QSPI_STATE_ERROR = 0x04 /*!< Peripheral in error */
+}HAL_QSPI_StateTypeDef;
+
+/**
+ * @brief QSPI Handle Structure definition
+ */
+typedef struct
+{
+ QUADSPI_TypeDef *Instance; /* QSPI registers base address */
+ QSPI_InitTypeDef Init; /* QSPI communication parameters */
+ uint8_t *pTxBuffPtr; /* Pointer to QSPI Tx transfer Buffer */
+ __IO uint16_t TxXferSize; /* QSPI Tx Transfer size */
+ __IO uint16_t TxXferCount; /* QSPI Tx Transfer Counter */
+ uint8_t *pRxBuffPtr; /* Pointer to QSPI Rx transfer Buffer */
+ __IO uint16_t RxXferSize; /* QSPI Rx Transfer size */
+ __IO uint16_t RxXferCount; /* QSPI Rx Transfer Counter */
+ DMA_HandleTypeDef *hdma; /* QSPI Rx/Tx DMA Handle parameters */
+ __IO HAL_LockTypeDef Lock; /* Locking object */
+ __IO HAL_QSPI_StateTypeDef State; /* QSPI communication state */
+ __IO uint32_t ErrorCode; /* QSPI Error code */
+ uint32_t Timeout; /* Timeout for the QSPI memory access */
+}QSPI_HandleTypeDef;
+
+/**
+ * @brief QSPI Command structure definition
+ */
+typedef struct
+{
+ uint32_t Instruction; /* Specifies the Instruction to be sent
+ This parameter can be a value (8-bit) between 0x00 and 0xFF */
+ uint32_t Address; /* Specifies the Address to be sent (Size from 1 to 4 bytes according AddressSize)
+ This parameter can be a value (32-bits) between 0x0 and 0xFFFFFFFF */
+ uint32_t AlternateBytes; /* Specifies the Alternate Bytes to be sent (Size from 1 to 4 bytes according AlternateBytesSize)
+ This parameter can be a value (32-bits) between 0x0 and 0xFFFFFFFF */
+ uint32_t AddressSize; /* Specifies the Address Size
+ This parameter can be a value of @ref QSPI_AddressSize */
+ uint32_t AlternateBytesSize; /* Specifies the Alternate Bytes Size
+ This parameter can be a value of @ref QSPI_AlternateBytesSize */
+ uint32_t DummyCycles; /* Specifies the Number of Dummy Cycles.
+ This parameter can be a number between 0 and 31 */
+ uint32_t InstructionMode; /* Specifies the Instruction Mode
+ This parameter can be a value of @ref QSPI_InstructionMode */
+ uint32_t AddressMode; /* Specifies the Address Mode
+ This parameter can be a value of @ref QSPI_AddressMode */
+ uint32_t AlternateByteMode; /* Specifies the Alternate Bytes Mode
+ This parameter can be a value of @ref QSPI_AlternateBytesMode */
+ uint32_t DataMode; /* Specifies the Data Mode (used for dummy cycles and data phases)
+ This parameter can be a value of @ref QSPI_DataMode */
+ uint32_t NbData; /* Specifies the number of data to transfer.
+ This parameter can be any value between 0 and 0xFFFFFFFF (0 means undefined length
+ until end of memory)*/
+ uint32_t DdrMode; /* Specifies the double data rate mode for address, alternate byte and data phase
+ This parameter can be a value of @ref QSPI_DdrMode */
+ uint32_t DdrHoldHalfCycle; /* Specifies the DDR hold half cycle. It delays the data output by one half of
+ system clock in DDR mode.
+ This parameter can be a value of @ref QSPI_DdrHoldHalfCycle */
+ uint32_t SIOOMode; /* Specifies the send instruction only once mode
+ This parameter can be a value of @ref QSPI_SIOOMode */
+}QSPI_CommandTypeDef;
+
+/**
+ * @brief QSPI Auto Polling mode configuration structure definition
+ */
+typedef struct
+{
+ uint32_t Match; /* Specifies the value to be compared with the masked status register to get a match.
+ This parameter can be any value between 0 and 0xFFFFFFFF */
+ uint32_t Mask; /* Specifies the mask to be applied to the status bytes received.
+ This parameter can be any value between 0 and 0xFFFFFFFF */
+ uint32_t Interval; /* Specifies the number of clock cycles between two read during automatic polling phases.
+ This parameter can be any value between 0 and 0xFFFF */
+ uint32_t StatusBytesSize; /* Specifies the size of the status bytes received.
+ This parameter can be any value between 1 and 4 */
+ uint32_t MatchMode; /* Specifies the method used for determining a match.
+ This parameter can be a value of @ref QSPI_MatchMode */
+ uint32_t AutomaticStop; /* Specifies if automatic polling is stopped after a match.
+ This parameter can be a value of @ref QSPI_AutomaticStop */
+}QSPI_AutoPollingTypeDef;
+
+/**
+ * @brief QSPI Memory Mapped mode configuration structure definition
+ */
+typedef struct
+{
+ uint32_t TimeOutPeriod; /* Specifies the number of clock to wait when the FIFO is full before to release the chip select.
+ This parameter can be any value between 0 and 0xFFFF */
+ uint32_t TimeOutActivation; /* Specifies if the time out counter is enabled to release the chip select.
+ This parameter can be a value of @ref QSPI_TimeOutActivation */
+}QSPI_MemoryMappedTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup QSPI_Exported_Constants QSPI Exported Constants
+ * @{
+ */
+/** @defgroup QSPI_ErrorCode QSPI Error Code
+ * @{
+ */
+#define HAL_QSPI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_QSPI_ERROR_TIMEOUT ((uint32_t)0x00000001) /*!< Timeout error */
+#define HAL_QSPI_ERROR_TRANSFER ((uint32_t)0x00000002) /*!< Transfer error */
+#define HAL_QSPI_ERROR_DMA ((uint32_t)0x00000004) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_SampleShifting QSPI Sample Shifting
+ * @{
+ */
+#define QSPI_SAMPLE_SHIFTING_NONE ((uint32_t)0x00000000) /*!<No clock cycle shift to sample data*/
+#define QSPI_SAMPLE_SHIFTING_HALFCYCLE ((uint32_t)QUADSPI_CR_SSHIFT) /*!<1/2 clock cycle shift to sample data*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_ChipSelectHighTime QSPI Chip Select High Time
+ * @{
+ */
+#define QSPI_CS_HIGH_TIME_1_CYCLE ((uint32_t)0x00000000) /*!<nCS stay high for at least 1 clock cycle between commands*/
+#define QSPI_CS_HIGH_TIME_2_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_0) /*!<nCS stay high for at least 2 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_3_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_1) /*!<nCS stay high for at least 3 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_4_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_0 | QUADSPI_DCR_CSHT_1) /*!<nCS stay high for at least 4 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_5_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_2) /*!<nCS stay high for at least 5 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_6_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_2 | QUADSPI_DCR_CSHT_0) /*!<nCS stay high for at least 6 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_7_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_2 | QUADSPI_DCR_CSHT_1) /*!<nCS stay high for at least 7 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_8_CYCLE ((uint32_t)QUADSPI_DCR_CSHT) /*!<nCS stay high for at least 8 clock cycles between commands*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_ClockMode QSPI Clock Mode
+ * @{
+ */
+#define QSPI_CLOCK_MODE_0 ((uint32_t)0x00000000) /*!<Clk stays low while nCS is released*/
+#define QSPI_CLOCK_MODE_3 ((uint32_t)QUADSPI_DCR_CKMODE) /*!<Clk goes high while nCS is released*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_Flash_Select QSPI Flash Select
+ * @{
+ */
+#define QSPI_FLASH_ID_1 ((uint32_t)0x00000000)
+#define QSPI_FLASH_ID_2 ((uint32_t)QUADSPI_CR_FSEL)
+/**
+ * @}
+ */
+
+ /** @defgroup QSPI_DualFlash_Mode QSPI Dual Flash Mode
+ * @{
+ */
+#define QSPI_DUALFLASH_ENABLE ((uint32_t)QUADSPI_CR_DFM)
+#define QSPI_DUALFLASH_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_AddressSize QSPI Address Size
+ * @{
+ */
+#define QSPI_ADDRESS_8_BITS ((uint32_t)0x00000000) /*!<8-bit address*/
+#define QSPI_ADDRESS_16_BITS ((uint32_t)QUADSPI_CCR_ADSIZE_0) /*!<16-bit address*/
+#define QSPI_ADDRESS_24_BITS ((uint32_t)QUADSPI_CCR_ADSIZE_1) /*!<24-bit address*/
+#define QSPI_ADDRESS_32_BITS ((uint32_t)QUADSPI_CCR_ADSIZE) /*!<32-bit address*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_AlternateBytesSize QSPI Alternate Bytes Size
+ * @{
+ */
+#define QSPI_ALTERNATE_BYTES_8_BITS ((uint32_t)0x00000000) /*!<8-bit alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_16_BITS ((uint32_t)QUADSPI_CCR_ABSIZE_0) /*!<16-bit alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_24_BITS ((uint32_t)QUADSPI_CCR_ABSIZE_1) /*!<24-bit alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_32_BITS ((uint32_t)QUADSPI_CCR_ABSIZE) /*!<32-bit alternate bytes*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_InstructionMode QSPI Instruction Mode
+* @{
+*/
+#define QSPI_INSTRUCTION_NONE ((uint32_t)0x00000000) /*!<No instruction*/
+#define QSPI_INSTRUCTION_1_LINE ((uint32_t)QUADSPI_CCR_IMODE_0) /*!<Instruction on a single line*/
+#define QSPI_INSTRUCTION_2_LINES ((uint32_t)QUADSPI_CCR_IMODE_1) /*!<Instruction on two lines*/
+#define QSPI_INSTRUCTION_4_LINES ((uint32_t)QUADSPI_CCR_IMODE) /*!<Instruction on four lines*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_AddressMode QSPI Address Mode
+* @{
+*/
+#define QSPI_ADDRESS_NONE ((uint32_t)0x00000000) /*!<No address*/
+#define QSPI_ADDRESS_1_LINE ((uint32_t)QUADSPI_CCR_ADMODE_0) /*!<Address on a single line*/
+#define QSPI_ADDRESS_2_LINES ((uint32_t)QUADSPI_CCR_ADMODE_1) /*!<Address on two lines*/
+#define QSPI_ADDRESS_4_LINES ((uint32_t)QUADSPI_CCR_ADMODE) /*!<Address on four lines*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_AlternateBytesMode QSPI Alternate Bytes Mode
+* @{
+*/
+#define QSPI_ALTERNATE_BYTES_NONE ((uint32_t)0x00000000) /*!<No alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_1_LINE ((uint32_t)QUADSPI_CCR_ABMODE_0) /*!<Alternate bytes on a single line*/
+#define QSPI_ALTERNATE_BYTES_2_LINES ((uint32_t)QUADSPI_CCR_ABMODE_1) /*!<Alternate bytes on two lines*/
+#define QSPI_ALTERNATE_BYTES_4_LINES ((uint32_t)QUADSPI_CCR_ABMODE) /*!<Alternate bytes on four lines*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_DataMode QSPI Data Mode
+ * @{
+ */
+#define QSPI_DATA_NONE ((uint32_t)0X00000000) /*!<No data*/
+#define QSPI_DATA_1_LINE ((uint32_t)QUADSPI_CCR_DMODE_0) /*!<Data on a single line*/
+#define QSPI_DATA_2_LINES ((uint32_t)QUADSPI_CCR_DMODE_1) /*!<Data on two lines*/
+#define QSPI_DATA_4_LINES ((uint32_t)QUADSPI_CCR_DMODE) /*!<Data on four lines*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_DdrMode QSPI Ddr Mode
+ * @{
+ */
+#define QSPI_DDR_MODE_DISABLE ((uint32_t)0x00000000) /*!<Double data rate mode disabled*/
+#define QSPI_DDR_MODE_ENABLE ((uint32_t)QUADSPI_CCR_DDRM) /*!<Double data rate mode enabled*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_DdrHoldHalfCycle QSPI Ddr HoldHalfCycle
+ * @{
+ */
+#define QSPI_DDR_HHC_ANALOG_DELAY ((uint32_t)0x00000000) /*!<Delay the data output using analog delay in DDR mode*/
+#define QSPI_DDR_HHC_HALF_CLK_DELAY ((uint32_t)QUADSPI_CCR_DHHC) /*!<Delay the data output by 1/2 clock cycle in DDR mode*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_SIOOMode QSPI SIOO Mode
+ * @{
+ */
+#define QSPI_SIOO_INST_EVERY_CMD ((uint32_t)0x00000000) /*!<Send instruction on every transaction*/
+#define QSPI_SIOO_INST_ONLY_FIRST_CMD ((uint32_t)QUADSPI_CCR_SIOO) /*!<Send instruction only for the first command*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_MatchMode QSPI Match Mode
+ * @{
+ */
+#define QSPI_MATCH_MODE_AND ((uint32_t)0x00000000) /*!<AND match mode between unmasked bits*/
+#define QSPI_MATCH_MODE_OR ((uint32_t)QUADSPI_CR_PMM) /*!<OR match mode between unmasked bits*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_AutomaticStop QSPI Automatic Stop
+ * @{
+ */
+#define QSPI_AUTOMATIC_STOP_DISABLE ((uint32_t)0x00000000) /*!<AutoPolling stops only with abort or QSPI disabling*/
+#define QSPI_AUTOMATIC_STOP_ENABLE ((uint32_t)QUADSPI_CR_APMS) /*!<AutoPolling stops as soon as there is a match*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_TimeOutActivation QSPI TimeOut Activation
+ * @{
+ */
+#define QSPI_TIMEOUT_COUNTER_DISABLE ((uint32_t)0x00000000) /*!<Timeout counter disabled, nCS remains active*/
+#define QSPI_TIMEOUT_COUNTER_ENABLE ((uint32_t)QUADSPI_CR_TCEN) /*!<Timeout counter enabled, nCS released when timeout expires*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_Flags QSPI Flags
+ * @{
+ */
+#define QSPI_FLAG_BUSY QUADSPI_SR_BUSY /*!<Busy flag: operation is ongoing*/
+#define QSPI_FLAG_TO QUADSPI_SR_TOF /*!<Timeout flag: timeout occurs in memory-mapped mode*/
+#define QSPI_FLAG_SM QUADSPI_SR_SMF /*!<Status match flag: received data matches in autopolling mode*/
+#define QSPI_FLAG_FT QUADSPI_SR_FTF /*!<Fifo threshold flag: Fifo threshold reached or data left after read from memory is complete*/
+#define QSPI_FLAG_TC QUADSPI_SR_TCF /*!<Transfer complete flag: programmed number of data have been transferred or the transfer has been aborted*/
+#define QSPI_FLAG_TE QUADSPI_SR_TEF /*!<Transfer error flag: invalid address is being accessed*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_Interrupts QSPI Interrupts
+ * @{
+ */
+#define QSPI_IT_TO QUADSPI_CR_TOIE /*!<Interrupt on the timeout flag*/
+#define QSPI_IT_SM QUADSPI_CR_SMIE /*!<Interrupt on the status match flag*/
+#define QSPI_IT_FT QUADSPI_CR_FTIE /*!<Interrupt on the fifo threshold flag*/
+#define QSPI_IT_TC QUADSPI_CR_TCIE /*!<Interrupt on the transfer complete flag*/
+#define QSPI_IT_TE QUADSPI_CR_TEIE /*!<Interrupt on the transfer error flag*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_Timeout_definition QSPI Timeout definition
+ * @{
+ */
+#define HAL_QPSI_TIMEOUT_DEFAULT_VALUE ((uint32_t)5000)/* 5 s */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup QSPI_Exported_Macros QSPI Exported Macros
+ * @{
+ */
+
+/** @brief Reset QSPI handle state
+ * @param __HANDLE__: QSPI handle.
+ * @retval None
+ */
+#define __HAL_QSPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_QSPI_STATE_RESET)
+
+/** @brief Enable QSPI
+ * @param __HANDLE__: specifies the QSPI Handle.
+ * @retval None
+ */
+#define __HAL_QSPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, QUADSPI_CR_EN)
+
+/** @brief Disable QSPI
+ * @param __HANDLE__: specifies the QSPI Handle.
+ * @retval None
+ */
+#define __HAL_QSPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR, QUADSPI_CR_EN)
+
+/** @brief Enables the specified QSPI interrupt.
+ * @param __HANDLE__: specifies the QSPI Handle.
+ * @param __INTERRUPT__: specifies the QSPI interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg QSPI_IT_TO: QSPI Time out interrupt
+ * @arg QSPI_IT_SM: QSPI Status match interrupt
+ * @arg QSPI_IT_FT: QSPI FIFO threshold interrupt
+ * @arg QSPI_IT_TC: QSPI Transfer complete interrupt
+ * @arg QSPI_IT_TE: QSPI Transfer error interrupt
+ * @retval None
+ */
+#define __HAL_QSPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__))
+
+
+/** @brief Disables the specified QSPI interrupt.
+ * @param __HANDLE__: specifies the QSPI Handle.
+ * @param __INTERRUPT__: specifies the QSPI interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg QSPI_IT_TO: QSPI Timeout interrupt
+ * @arg QSPI_IT_SM: QSPI Status match interrupt
+ * @arg QSPI_IT_FT: QSPI FIFO threshold interrupt
+ * @arg QSPI_IT_TC: QSPI Transfer complete interrupt
+ * @arg QSPI_IT_TE: QSPI Transfer error interrupt
+ * @retval None
+ */
+#define __HAL_QSPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__))
+
+/** @brief Checks whether the specified QSPI interrupt source is enabled.
+ * @param __HANDLE__: specifies the QSPI Handle.
+ * @param __INTERRUPT__: specifies the QSPI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg QSPI_IT_TO: QSPI Time out interrupt
+ * @arg QSPI_IT_SM: QSPI Status match interrupt
+ * @arg QSPI_IT_FT: QSPI FIFO threshold interrupt
+ * @arg QSPI_IT_TC: QSPI Transfer complete interrupt
+ * @arg QSPI_IT_TE: QSPI Transfer error interrupt
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_QSPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (READ_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+ * @brief Get the selected QSPI's flag status.
+ * @param __HANDLE__: specifies the QSPI Handle.
+ * @param __FLAG__: specifies the QSPI flag to check.
+ * This parameter can be one of the following values:
+ * @arg QSPI_FLAG_BUSY: QSPI Busy flag
+ * @arg QSPI_FLAG_TO: QSPI Time out flag
+ * @arg QSPI_FLAG_SM: QSPI Status match flag
+ * @arg QSPI_FLAG_FT: QSPI FIFO threshold flag
+ * @arg QSPI_FLAG_TC: QSPI Transfer complete flag
+ * @arg QSPI_FLAG_TE: QSPI Transfer error flag
+ * @retval None
+ */
+#define __HAL_QSPI_GET_FLAG(__HANDLE__, __FLAG__) (READ_BIT((__HANDLE__)->Instance->SR, (__FLAG__)) != 0)
+
+/** @brief Clears the specified QSPI's flag status.
+ * @param __HANDLE__: specifies the QSPI Handle.
+ * @param __FLAG__: specifies the QSPI clear register flag that needs to be set
+ * This parameter can be one of the following values:
+ * @arg QSPI_FLAG_TO: QSPI Time out flag
+ * @arg QSPI_FLAG_SM: QSPI Status match flag
+ * @arg QSPI_FLAG_TC: QSPI Transfer complete flag
+ * @arg QSPI_FLAG_TE: QSPI Transfer error flag
+ * @retval None
+ */
+#define __HAL_QSPI_CLEAR_FLAG(__HANDLE__, __FLAG__) WRITE_REG((__HANDLE__)->Instance->FCR, (__FLAG__))
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup QSPI_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup QSPI_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_QSPI_Init (QSPI_HandleTypeDef *hqspi);
+HAL_StatusTypeDef HAL_QSPI_DeInit (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_MspInit (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef *hqspi);
+/**
+ * @}
+ */
+
+/** @addtogroup QSPI_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *****************************************************/
+/* QSPI IRQ handler method */
+void HAL_QSPI_IRQHandler(QSPI_HandleTypeDef *hqspi);
+
+/* QSPI indirect mode */
+HAL_StatusTypeDef HAL_QSPI_Command (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t Timeout);
+HAL_StatusTypeDef HAL_QSPI_Transmit (QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_QSPI_Receive (QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_QSPI_Command_IT (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd);
+HAL_StatusTypeDef HAL_QSPI_Transmit_IT (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+HAL_StatusTypeDef HAL_QSPI_Receive_IT (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+HAL_StatusTypeDef HAL_QSPI_Transmit_DMA (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+HAL_StatusTypeDef HAL_QSPI_Receive_DMA (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+
+/* QSPI status flag polling mode */
+HAL_StatusTypeDef HAL_QSPI_AutoPolling (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg, uint32_t Timeout);
+HAL_StatusTypeDef HAL_QSPI_AutoPolling_IT(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg);
+
+/* QSPI memory-mapped mode */
+HAL_StatusTypeDef HAL_QSPI_MemoryMapped(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_MemoryMappedTypeDef *cfg);
+/**
+ * @}
+ */
+
+/** @addtogroup QSPI_Exported_Functions_Group3
+ * @{
+ */
+/* Callback functions in non-blocking modes ***********************************/
+void HAL_QSPI_ErrorCallback (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_FifoThresholdCallback(QSPI_HandleTypeDef *hqspi);
+
+/* QSPI indirect mode */
+void HAL_QSPI_CmdCpltCallback (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_RxCpltCallback (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_TxCpltCallback (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_RxHalfCpltCallback (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_TxHalfCpltCallback (QSPI_HandleTypeDef *hqspi);
+
+/* QSPI status flag polling mode */
+void HAL_QSPI_StatusMatchCallback (QSPI_HandleTypeDef *hqspi);
+
+/* QSPI memory-mapped mode */
+void HAL_QSPI_TimeOutCallback (QSPI_HandleTypeDef *hqspi);
+/**
+ * @}
+ */
+
+/** @addtogroup QSPI_Exported_Functions_Group4
+ * @{
+ */
+/* Peripheral Control and State functions ************************************/
+HAL_QSPI_StateTypeDef HAL_QSPI_GetState(QSPI_HandleTypeDef *hqspi);
+uint32_t HAL_QSPI_GetError(QSPI_HandleTypeDef *hqspi);
+HAL_StatusTypeDef HAL_QSPI_Abort (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_SetTimeout(QSPI_HandleTypeDef *hqspi, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup QSPI_Private_Constants QSPI Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup QSPI_Private_Macros QSPI Private Macros
+ * @{
+ */
+/** @defgroup QSPI_ClockPrescaler QSPI Clock Prescaler
+ * @{
+ */
+#define IS_QSPI_CLOCK_PRESCALER(PRESCALER) ((PRESCALER) <= 0xFF)
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_FifoThreshold QSPI Fifo Threshold
+ * @{
+ */
+#define IS_QSPI_FIFO_THRESHOLD(THR) (((THR) > 0) && ((THR) <= 32))
+/**
+ * @}
+ */
+
+#define IS_QSPI_SSHIFT(SSHIFT) (((SSHIFT) == QSPI_SAMPLE_SHIFTING_NONE) || \
+ ((SSHIFT) == QSPI_SAMPLE_SHIFTING_HALFCYCLE))
+
+/** @defgroup QSPI_FlashSize QSPI Flash Size
+ * @{
+ */
+#define IS_QSPI_FLASH_SIZE(FSIZE) (((FSIZE) <= 31))
+/**
+ * @}
+ */
+
+#define IS_QSPI_CS_HIGH_TIME(CSHTIME) (((CSHTIME) == QSPI_CS_HIGH_TIME_1_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_2_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_3_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_4_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_5_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_6_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_7_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_8_CYCLE))
+
+#define IS_QSPI_CLOCK_MODE(CLKMODE) (((CLKMODE) == QSPI_CLOCK_MODE_0) || \
+ ((CLKMODE) == QSPI_CLOCK_MODE_3))
+
+#define IS_QSPI_FLASH_ID(FLA) (((FLA) == QSPI_FLASH_ID_1) || \
+ ((FLA) == QSPI_FLASH_ID_2))
+
+#define IS_QSPI_DUAL_FLASH_MODE(MODE) (((MODE) == QSPI_DUALFLASH_ENABLE) || \
+ ((MODE) == QSPI_DUALFLASH_DISABLE))
+
+
+/** @defgroup QSPI_Instruction QSPI Instruction
+ * @{
+ */
+#define IS_QSPI_INSTRUCTION(INSTRUCTION) ((INSTRUCTION) <= 0xFF)
+/**
+ * @}
+ */
+
+#define IS_QSPI_ADDRESS_SIZE(ADDR_SIZE) (((ADDR_SIZE) == QSPI_ADDRESS_8_BITS) || \
+ ((ADDR_SIZE) == QSPI_ADDRESS_16_BITS) || \
+ ((ADDR_SIZE) == QSPI_ADDRESS_24_BITS) || \
+ ((ADDR_SIZE) == QSPI_ADDRESS_32_BITS))
+
+#define IS_QSPI_ALTERNATE_BYTES_SIZE(SIZE) (((SIZE) == QSPI_ALTERNATE_BYTES_8_BITS) || \
+ ((SIZE) == QSPI_ALTERNATE_BYTES_16_BITS) || \
+ ((SIZE) == QSPI_ALTERNATE_BYTES_24_BITS) || \
+ ((SIZE) == QSPI_ALTERNATE_BYTES_32_BITS))
+
+
+/** @defgroup QSPI_DummyCycles QSPI Dummy Cycles
+ * @{
+ */
+#define IS_QSPI_DUMMY_CYCLES(DCY) ((DCY) <= 31)
+/**
+ * @}
+ */
+
+#define IS_QSPI_INSTRUCTION_MODE(MODE) (((MODE) == QSPI_INSTRUCTION_NONE) || \
+ ((MODE) == QSPI_INSTRUCTION_1_LINE) || \
+ ((MODE) == QSPI_INSTRUCTION_2_LINES) || \
+ ((MODE) == QSPI_INSTRUCTION_4_LINES))
+
+#define IS_QSPI_ADDRESS_MODE(MODE) (((MODE) == QSPI_ADDRESS_NONE) || \
+ ((MODE) == QSPI_ADDRESS_1_LINE) || \
+ ((MODE) == QSPI_ADDRESS_2_LINES) || \
+ ((MODE) == QSPI_ADDRESS_4_LINES))
+
+#define IS_QSPI_ALTERNATE_BYTES_MODE(MODE) (((MODE) == QSPI_ALTERNATE_BYTES_NONE) || \
+ ((MODE) == QSPI_ALTERNATE_BYTES_1_LINE) || \
+ ((MODE) == QSPI_ALTERNATE_BYTES_2_LINES) || \
+ ((MODE) == QSPI_ALTERNATE_BYTES_4_LINES))
+
+#define IS_QSPI_DATA_MODE(MODE) (((MODE) == QSPI_DATA_NONE) || \
+ ((MODE) == QSPI_DATA_1_LINE) || \
+ ((MODE) == QSPI_DATA_2_LINES) || \
+ ((MODE) == QSPI_DATA_4_LINES))
+
+#define IS_QSPI_DDR_MODE(DDR_MODE) (((DDR_MODE) == QSPI_DDR_MODE_DISABLE) || \
+ ((DDR_MODE) == QSPI_DDR_MODE_ENABLE))
+
+#define IS_QSPI_DDR_HHC(DDR_HHC) (((DDR_HHC) == QSPI_DDR_HHC_ANALOG_DELAY) || \
+ ((DDR_HHC) == QSPI_DDR_HHC_HALF_CLK_DELAY))
+
+#define IS_QSPI_SIOO_MODE(SIOO_MODE) (((SIOO_MODE) == QSPI_SIOO_INST_EVERY_CMD) || \
+ ((SIOO_MODE) == QSPI_SIOO_INST_ONLY_FIRST_CMD))
+
+/** @defgroup QSPI_Interval QSPI Interval
+ * @{
+ */
+#define IS_QSPI_INTERVAL(INTERVAL) ((INTERVAL) <= QUADSPI_PIR_INTERVAL)
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_StatusBytesSize QSPI Status Bytes Size
+ * @{
+ */
+#define IS_QSPI_STATUS_BYTES_SIZE(SIZE) (((SIZE) >= 1) && ((SIZE) <= 4))
+/**
+ * @}
+ */
+#define IS_QSPI_MATCH_MODE(MODE) (((MODE) == QSPI_MATCH_MODE_AND) || \
+ ((MODE) == QSPI_MATCH_MODE_OR))
+
+#define IS_QSPI_AUTOMATIC_STOP(APMS) (((APMS) == QSPI_AUTOMATIC_STOP_DISABLE) || \
+ ((APMS) == QSPI_AUTOMATIC_STOP_ENABLE))
+
+#define IS_QSPI_TIMEOUT_ACTIVATION(TCEN) (((TCEN) == QSPI_TIMEOUT_COUNTER_DISABLE) || \
+ ((TCEN) == QSPI_TIMEOUT_COUNTER_ENABLE))
+
+/** @defgroup QSPI_TimeOutPeriod QSPI TimeOut Period
+ * @{
+ */
+#define IS_QSPI_TIMEOUT_PERIOD(PERIOD) ((PERIOD) <= 0xFFFF)
+/**
+ * @}
+ */
+
+#define IS_QSPI_GET_FLAG(FLAG) (((FLAG) == QSPI_FLAG_BUSY) || \
+ ((FLAG) == QSPI_FLAG_TO) || \
+ ((FLAG) == QSPI_FLAG_SM) || \
+ ((FLAG) == QSPI_FLAG_FT) || \
+ ((FLAG) == QSPI_FLAG_TC) || \
+ ((FLAG) == QSPI_FLAG_TE))
+
+#define IS_QSPI_IT(IT) ((((IT) & (uint32_t)0xFFE0FFFF) == 0x00000000) && ((IT) != 0x00000000))
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup QSPI_Private_Functions QSPI Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F446xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_QSPI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_rcc.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,1537 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rcc.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of RCC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RCC_H
+#define __STM32F4xx_HAL_RCC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/* Include RCC HAL Extended module */
+/* (include on top of file since RCC structures are defined in extended file) */
+#include "stm32f4xx_hal_rcc_ex.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup RCC_Exported_Types RCC Exported Types
+ * @{
+ */
+
+/**
+ * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition
+ */
+typedef struct
+{
+ uint32_t OscillatorType; /*!< The oscillators to be configured.
+ This parameter can be a value of @ref RCC_Oscillator_Type */
+
+ uint32_t HSEState; /*!< The new state of the HSE.
+ This parameter can be a value of @ref RCC_HSE_Config */
+
+ uint32_t LSEState; /*!< The new state of the LSE.
+ This parameter can be a value of @ref RCC_LSE_Config */
+
+ uint32_t HSIState; /*!< The new state of the HSI.
+ This parameter can be a value of @ref RCC_HSI_Config */
+
+ uint32_t HSICalibrationValue; /*!< The calibration trimming value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
+
+ uint32_t LSIState; /*!< The new state of the LSI.
+ This parameter can be a value of @ref RCC_LSI_Config */
+
+ RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */
+
+}RCC_OscInitTypeDef;
+
+/**
+ * @brief RCC System, AHB and APB busses clock configuration structure definition
+ */
+typedef struct
+{
+ uint32_t ClockType; /*!< The clock to be configured.
+ This parameter can be a value of @ref RCC_System_Clock_Type */
+
+ uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock.
+ This parameter can be a value of @ref RCC_System_Clock_Source */
+
+ uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
+ This parameter can be a value of @ref RCC_AHB_Clock_Source */
+
+ uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
+
+ uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
+
+}RCC_ClkInitTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCC_Exported_Constants RCC Exported Constants
+ * @{
+ */
+
+/** @defgroup RCC_Oscillator_Type Oscillator Type
+ * @{
+ */
+#define RCC_OSCILLATORTYPE_NONE ((uint32_t)0x00000000)
+#define RCC_OSCILLATORTYPE_HSE ((uint32_t)0x00000001)
+#define RCC_OSCILLATORTYPE_HSI ((uint32_t)0x00000002)
+#define RCC_OSCILLATORTYPE_LSE ((uint32_t)0x00000004)
+#define RCC_OSCILLATORTYPE_LSI ((uint32_t)0x00000008)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSE_Config HSE Config
+ * @{
+ */
+#define RCC_HSE_OFF ((uint8_t)0x00)
+#define RCC_HSE_ON ((uint8_t)0x01)
+#define RCC_HSE_BYPASS ((uint8_t)0x05)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSE_Config LSE Config
+ * @{
+ */
+#define RCC_LSE_OFF ((uint8_t)0x00)
+#define RCC_LSE_ON ((uint8_t)0x01)
+#define RCC_LSE_BYPASS ((uint8_t)0x05)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI_Config HSI Config
+ * @{
+ */
+#define RCC_HSI_OFF ((uint8_t)0x00)
+#define RCC_HSI_ON ((uint8_t)0x01)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSI_Config LSI Config
+ * @{
+ */
+#define RCC_LSI_OFF ((uint8_t)0x00)
+#define RCC_LSI_ON ((uint8_t)0x01)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Config PLL Config
+ * @{
+ */
+#define RCC_PLL_NONE ((uint8_t)0x00)
+#define RCC_PLL_OFF ((uint8_t)0x01)
+#define RCC_PLL_ON ((uint8_t)0x02)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLLP_Clock_Divider PLLP Clock Divider
+ * @{
+ */
+#define RCC_PLLP_DIV2 ((uint32_t)0x00000002)
+#define RCC_PLLP_DIV4 ((uint32_t)0x00000004)
+#define RCC_PLLP_DIV6 ((uint32_t)0x00000006)
+#define RCC_PLLP_DIV8 ((uint32_t)0x00000008)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Clock_Source PLL Clock Source
+ * @{
+ */
+#define RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI
+#define RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Type System Clock Type
+ * @{
+ */
+#define RCC_CLOCKTYPE_SYSCLK ((uint32_t)0x00000001)
+#define RCC_CLOCKTYPE_HCLK ((uint32_t)0x00000002)
+#define RCC_CLOCKTYPE_PCLK1 ((uint32_t)0x00000004)
+#define RCC_CLOCKTYPE_PCLK2 ((uint32_t)0x00000008)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Source System Clock Source
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI
+#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE
+#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL
+#define RCC_SYSCLKSOURCE_PLLRCLK ((uint32_t)(RCC_CFGR_SW_0 | RCC_CFGR_SW_1))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */
+#define RCC_SYSCLKSOURCE_STATUS_PLLRCLK ((uint32_t)(RCC_CFGR_SW_0 | RCC_CFGR_SW_1)) /*!< PLLR used as system clock */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB_Clock_Source AHB Clock Source
+ * @{
+ */
+#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1
+#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2
+#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4
+#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8
+#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16
+#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64
+#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128
+#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256
+#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_APB2_Clock_Source APB1/APB2 Clock Source
+ * @{
+ */
+#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1
+#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2
+#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4
+#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8
+#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16
+/**
+ * @}
+ */
+
+/** @defgroup RCC_RTC_Clock_Source RTC Clock Source
+ * @{
+ */
+#define RCC_RTCCLKSOURCE_LSE ((uint32_t)0x00000100)
+#define RCC_RTCCLKSOURCE_LSI ((uint32_t)0x00000200)
+#define RCC_RTCCLKSOURCE_HSE_DIV2 ((uint32_t)0x00020300)
+#define RCC_RTCCLKSOURCE_HSE_DIV3 ((uint32_t)0x00030300)
+#define RCC_RTCCLKSOURCE_HSE_DIV4 ((uint32_t)0x00040300)
+#define RCC_RTCCLKSOURCE_HSE_DIV5 ((uint32_t)0x00050300)
+#define RCC_RTCCLKSOURCE_HSE_DIV6 ((uint32_t)0x00060300)
+#define RCC_RTCCLKSOURCE_HSE_DIV7 ((uint32_t)0x00070300)
+#define RCC_RTCCLKSOURCE_HSE_DIV8 ((uint32_t)0x00080300)
+#define RCC_RTCCLKSOURCE_HSE_DIV9 ((uint32_t)0x00090300)
+#define RCC_RTCCLKSOURCE_HSE_DIV10 ((uint32_t)0x000A0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV11 ((uint32_t)0x000B0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV12 ((uint32_t)0x000C0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV13 ((uint32_t)0x000D0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV14 ((uint32_t)0x000E0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV15 ((uint32_t)0x000F0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV16 ((uint32_t)0x00100300)
+#define RCC_RTCCLKSOURCE_HSE_DIV17 ((uint32_t)0x00110300)
+#define RCC_RTCCLKSOURCE_HSE_DIV18 ((uint32_t)0x00120300)
+#define RCC_RTCCLKSOURCE_HSE_DIV19 ((uint32_t)0x00130300)
+#define RCC_RTCCLKSOURCE_HSE_DIV20 ((uint32_t)0x00140300)
+#define RCC_RTCCLKSOURCE_HSE_DIV21 ((uint32_t)0x00150300)
+#define RCC_RTCCLKSOURCE_HSE_DIV22 ((uint32_t)0x00160300)
+#define RCC_RTCCLKSOURCE_HSE_DIV23 ((uint32_t)0x00170300)
+#define RCC_RTCCLKSOURCE_HSE_DIV24 ((uint32_t)0x00180300)
+#define RCC_RTCCLKSOURCE_HSE_DIV25 ((uint32_t)0x00190300)
+#define RCC_RTCCLKSOURCE_HSE_DIV26 ((uint32_t)0x001A0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV27 ((uint32_t)0x001B0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV28 ((uint32_t)0x001C0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV29 ((uint32_t)0x001D0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV30 ((uint32_t)0x001E0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV31 ((uint32_t)0x001F0300)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_I2S_Clock_Source I2S Clock Source
+ * @{
+ */
+#define RCC_I2SCLKSOURCE_PLLI2S ((uint32_t)0x00000000)
+#define RCC_I2SCLKSOURCE_EXT ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCO_Index MCO Index
+ * @{
+ */
+#define RCC_MCO1 ((uint32_t)0x00000000)
+#define RCC_MCO2 ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCO1_Clock_Source MCO1 Clock Source
+ * @{
+ */
+#define RCC_MCO1SOURCE_HSI ((uint32_t)0x00000000)
+#define RCC_MCO1SOURCE_LSE RCC_CFGR_MCO1_0
+#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCO1_1
+#define RCC_MCO1SOURCE_PLLCLK RCC_CFGR_MCO1
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCO2_Clock_Source MCO2 Clock Source
+ * @{
+ */
+#define RCC_MCO2SOURCE_SYSCLK ((uint32_t)0x00000000)
+#define RCC_MCO2SOURCE_PLLI2SCLK RCC_CFGR_MCO2_0
+#define RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2_1
+#define RCC_MCO2SOURCE_PLLCLK RCC_CFGR_MCO2
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCOx_Clock_Prescaler MCOx Clock Prescaler
+ * @{
+ */
+#define RCC_MCODIV_1 ((uint32_t)0x00000000)
+#define RCC_MCODIV_2 RCC_CFGR_MCO1PRE_2
+#define RCC_MCODIV_3 ((uint32_t)RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_2)
+#define RCC_MCODIV_4 ((uint32_t)RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2)
+#define RCC_MCODIV_5 RCC_CFGR_MCO1PRE
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Interrupt Interrupts
+ * @{
+ */
+#define RCC_IT_LSIRDY ((uint8_t)0x01)
+#define RCC_IT_LSERDY ((uint8_t)0x02)
+#define RCC_IT_HSIRDY ((uint8_t)0x04)
+#define RCC_IT_HSERDY ((uint8_t)0x08)
+#define RCC_IT_PLLRDY ((uint8_t)0x10)
+#define RCC_IT_PLLI2SRDY ((uint8_t)0x20)
+#define RCC_IT_CSS ((uint8_t)0x80)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flag Flags
+ * Elements values convention: 0XXYYYYYb
+ * - YYYYY : Flag position in the register
+ * - 0XX : Register index
+ * - 01: CR register
+ * - 10: BDCR register
+ * - 11: CSR register
+ * @{
+ */
+/* Flags in the CR register */
+#define RCC_FLAG_HSIRDY ((uint8_t)0x21)
+#define RCC_FLAG_HSERDY ((uint8_t)0x31)
+#define RCC_FLAG_PLLRDY ((uint8_t)0x39)
+#define RCC_FLAG_PLLI2SRDY ((uint8_t)0x3B)
+
+/* Flags in the BDCR register */
+#define RCC_FLAG_LSERDY ((uint8_t)0x41)
+
+/* Flags in the CSR register */
+#define RCC_FLAG_LSIRDY ((uint8_t)0x61)
+#define RCC_FLAG_BORRST ((uint8_t)0x79)
+#define RCC_FLAG_PINRST ((uint8_t)0x7A)
+#define RCC_FLAG_PORRST ((uint8_t)0x7B)
+#define RCC_FLAG_SFTRST ((uint8_t)0x7C)
+#define RCC_FLAG_IWDGRST ((uint8_t)0x7D)
+#define RCC_FLAG_WWDGRST ((uint8_t)0x7E)
+#define RCC_FLAG_LPWRRST ((uint8_t)0x7F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RCC_Exported_Macros RCC Exported Macros
+ * @{
+ */
+
+/** @defgroup RCC_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOH_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CRC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DMA1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DMA2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOAEN))
+#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOBEN))
+#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOCEN))
+#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
+#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
+#define __HAL_RCC_GPIOH_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOHEN))
+#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
+#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
+#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN))
+#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA1EN))
+#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2EN))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\
+ __HAL_RCC_SYSCFG_CLK_ENABLE();\
+ }while(0)
+
+#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() do { (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN));\
+ __HAL_RCC_SYSCFG_CLK_DISABLE();\
+ }while(0)
+
+#define __HAL_RCC_RNG_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_RNGEN))
+#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_WWDG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USART2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_I2C1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_I2C2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_I2C3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_PWR_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN))
+#define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
+#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN))
+#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN))
+#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
+#define __HAL_RCC_PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __HAL_RCC_TIM1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USART1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USART6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ADC1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SDIO_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM9_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM10_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM11_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN))
+#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
+#define __HAL_RCC_USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN))
+#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN))
+#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN))
+#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
+#define __HAL_RCC_SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN))
+#define __HAL_RCC_TIM9_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM9EN))
+#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
+#define __HAL_RCC_TIM11_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM11EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB1_Force_Release_Reset AHB1 Force Release Reset
+ * @brief Force or release AHB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0xFFFFFFFF)
+#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOARST))
+#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOBRST))
+#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOCRST))
+#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_GPIOH_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOHRST))
+#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
+#define __HAL_RCC_DMA1_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA1RST))
+#define __HAL_RCC_DMA2_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2RST))
+
+#define __HAL_RCC_AHB1_RELEASE_RESET() (RCC->AHB1RSTR = 0x00)
+#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOARST))
+#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOBRST))
+#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOCRST))
+#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
+#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
+#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_GPIOH_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOHRST))
+#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST))
+#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
+#define __HAL_RCC_DMA1_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA1RST))
+#define __HAL_RCC_DMA2_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB2_Force_Release_Reset AHB2 Force Release Reset
+ * @brief Force or release AHB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFF)
+#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST))
+
+#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00)
+#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST))
+
+#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST))
+#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Force_Release_Reset APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFF)
+#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST))
+#define __HAL_RCC_WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST))
+#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
+#define __HAL_RCC_PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST))
+
+#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00)
+#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST))
+#define __HAL_RCC_WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST))
+#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST))
+#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST))
+#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
+#define __HAL_RCC_PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Force_Release_Reset APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFF)
+#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST))
+#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST))
+#define __HAL_RCC_USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST))
+#define __HAL_RCC_ADC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADCRST))
+#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST))
+#define __HAL_RCC_TIM9_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM9RST))
+#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
+#define __HAL_RCC_TIM11_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM11RST))
+
+#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00)
+#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST))
+#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST))
+#define __HAL_RCC_USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST))
+#define __HAL_RCC_ADC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADCRST))
+#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST))
+#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
+#define __HAL_RCC_SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST))
+#define __HAL_RCC_TIM9_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM9RST))
+#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
+#define __HAL_RCC_TIM11_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM11RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB3_Force_Release_Reset AHB3 Force Release Reset
+ * @brief Force or release AHB3 peripheral reset.
+ * @{
+ */
+#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFF)
+#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOALPEN))
+#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOBLPEN))
+#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOCLPEN))
+#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOHLPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
+#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN))
+#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA1LPEN))
+#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2LPEN))
+
+#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOALPEN))
+#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOBLPEN))
+#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOCLPEN))
+#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN))
+#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN))
+#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOHLPEN))
+#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
+#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
+#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
+#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN))
+#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA1LPEN))
+#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2LPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN))
+
+#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN))
+
+#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN))
+#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_TIM5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM5LPEN))
+#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_WWDGLPEN))
+#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI2LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART2LPEN))
+#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C1LPEN))
+#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C2LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN))
+#define __HAL_RCC_PWR_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_PWRLPEN))
+
+#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN))
+#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN))
+#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN))
+#define __HAL_RCC_TIM5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM5LPEN))
+#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_WWDGLPEN))
+#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI2LPEN))
+#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))
+#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART2LPEN))
+#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C1LPEN))
+#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C2LPEN))
+#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN))
+#define __HAL_RCC_PWR_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_PWRLPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable
+ * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wake-up from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ * @{
+ */
+#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM1LPEN))
+#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART1LPEN))
+#define __HAL_RCC_USART6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART6LPEN))
+#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC1LPEN))
+#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI1LPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SYSCFGLPEN))
+#define __HAL_RCC_TIM9_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM9LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN))
+#define __HAL_RCC_TIM11_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM11LPEN))
+
+#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM1LPEN))
+#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART1LPEN))
+#define __HAL_RCC_USART6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART6LPEN))
+#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC1LPEN))
+#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN))
+#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI1LPEN))
+#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN))
+#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SYSCFGLPEN))
+#define __HAL_RCC_TIM9_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM9LPEN))
+#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN))
+#define __HAL_RCC_TIM11_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM11LPEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI_Configuration HSI Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI).
+ * @note The HSI is stopped by hardware when entering STOP and STANDBY modes.
+ * It is used (enabled by hardware) as system clock source after startup
+ * from Reset, wake-up from STOP and STANDBY mode, or in case of failure
+ * of the HSE used directly or indirectly as system clock (if the Clock
+ * Security System CSS is enabled).
+ * @note HSI can not be stopped if it is used as system clock source. In this case,
+ * you have to select another source of the system clock then stop the HSI.
+ * @note After enabling the HSI, the application software should wait on HSIRDY
+ * flag to be set indicating that HSI clock is stable and can be used as
+ * system clock source.
+ * This parameter can be: ENABLE or DISABLE.
+ * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_HSI_ENABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = ENABLE)
+#define __HAL_RCC_HSI_DISABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = DISABLE)
+
+/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
+ * @note The calibration is used to compensate for the variations in voltage
+ * and temperature that influence the frequency of the internal HSI RC.
+ * @param __HSICalibrationValue__: specifies the calibration trimming value.
+ * This parameter must be a number between 0 and 0x1F.
+ */
+#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) (MODIFY_REG(RCC->CR,\
+ RCC_CR_HSITRIM, (uint32_t)(__HSICalibrationValue__) << POSITION_VAL(RCC_CR_HSITRIM)))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSI_Configuration LSI Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI).
+ * @note After enabling the LSI, the application software should wait on
+ * LSIRDY flag to be set indicating that LSI clock is stable and can
+ * be used to clock the IWDG and/or the RTC.
+ * @note LSI can not be disabled if the IWDG is running.
+ * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_LSI_ENABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = ENABLE)
+#define __HAL_RCC_LSI_DISABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = DISABLE)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSE_Configuration HSE Configuration
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the External High Speed oscillator (HSE).
+ * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not supported by this macro.
+ * User should request a transition to HSE Off first and then HSE On or HSE Bypass.
+ * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application
+ * software should wait on HSERDY flag to be set indicating that HSE clock
+ * is stable and can be used to clock the PLL and/or system clock.
+ * @note HSE state can not be changed if it is used directly or through the
+ * PLL as system clock. In this case, you have to select another source
+ * of the system clock then change the HSE state (ex. disable it).
+ * @note The HSE is stopped by hardware when entering STOP and STANDBY modes.
+ * @note This function reset the CSSON bit, so if the clock security system(CSS)
+ * was previously enabled you have to enable it again after calling this
+ * function.
+ * @param __STATE__: specifies the new state of the HSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after
+ * 6 HSE oscillator clock cycles.
+ * @arg RCC_HSE_ON: turn ON the HSE oscillator.
+ * @arg RCC_HSE_BYPASS: HSE oscillator bypassed with external clock.
+ */
+#define __HAL_RCC_HSE_CONFIG(__STATE__) (*(__IO uint8_t *) RCC_CR_BYTE2_ADDRESS = (__STATE__))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSE_Configuration LSE Configuration
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the External Low Speed oscillator (LSE).
+ * @note Transition LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro.
+ * User should request a transition to LSE Off first and then LSE On or LSE Bypass.
+ * @note As the LSE is in the Backup domain and write access is denied to
+ * this domain after reset, you have to enable write access using
+ * HAL_PWR_EnableBkUpAccess() function before to configure the LSE
+ * (to be done once after reset).
+ * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application
+ * software should wait on LSERDY flag to be set indicating that LSE clock
+ * is stable and can be used to clock the RTC.
+ * @param __STATE__: specifies the new state of the LSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after
+ * 6 LSE oscillator clock cycles.
+ * @arg RCC_LSE_ON: turn ON the LSE oscillator.
+ * @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock.
+ */
+#define __HAL_RCC_LSE_CONFIG(__STATE__) (*(__IO uint8_t *) RCC_BDCR_BYTE0_ADDRESS = (__STATE__))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Internal_RTC_Clock_Configuration RTC Clock Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the RTC clock.
+ * @note These macros must be used only after the RTC clock source was selected.
+ */
+#define __HAL_RCC_RTC_ENABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = ENABLE)
+#define __HAL_RCC_RTC_DISABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = DISABLE)
+
+/** @brief Macros to configure the RTC clock (RTCCLK).
+ * @note As the RTC clock configuration bits are in the Backup domain and write
+ * access is denied to this domain after reset, you have to enable write
+ * access using the Power Backup Access macro before to configure
+ * the RTC clock source (to be done once after reset).
+ * @note Once the RTC clock is configured it can't be changed unless the
+ * Backup domain is reset using __HAL_RCC_BackupReset_RELEASE() macro, or by
+ * a Power On Reset (POR).
+ * @param __RTCCLKSource__: specifies the RTC clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock.
+ * @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock.
+ * @arg RCC_RTCCLKSOURCE_HSE_DIVx: HSE clock divided by x selected
+ * as RTC clock, where x:[2,31]
+ * @note If the LSE or LSI is used as RTC clock source, the RTC continues to
+ * work in STOP and STANDBY modes, and can be used as wake-up source.
+ * However, when the HSE clock is used as RTC clock source, the RTC
+ * cannot be used in STOP and STANDBY modes.
+ * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as
+ * RTC clock source).
+ */
+#define __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__) (((__RTCCLKSource__) & RCC_BDCR_RTCSEL) == RCC_BDCR_RTCSEL) ? \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, ((__RTCCLKSource__) & 0xFFFFCFF)) : CLEAR_BIT(RCC->CFGR, RCC_CFGR_RTCPRE)
+
+#define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) do { __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__); \
+ RCC->BDCR |= ((__RTCCLKSource__) & 0x00000FFF); \
+ } while (0)
+
+/** @brief Macros to force or release the Backup domain reset.
+ * @note This function resets the RTC peripheral (including the backup registers)
+ * and the RTC clock source selection in RCC_CSR register.
+ * @note The BKPSRAM is not affected by this reset.
+ */
+#define __HAL_RCC_BACKUPRESET_FORCE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = ENABLE)
+#define __HAL_RCC_BACKUPRESET_RELEASE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = DISABLE)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Configuration PLL Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the main PLL.
+ * @note After enabling the main PLL, the application software should wait on
+ * PLLRDY flag to be set indicating that PLL clock is stable and can
+ * be used as system clock source.
+ * @note The main PLL can not be disabled if it is used as system clock source
+ * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLL_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = ENABLE)
+#define __HAL_RCC_PLL_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = DISABLE)
+/**
+ * @}
+ */
+
+/** @brief Macro to configure the PLL clock source.
+ * @note This function must be used only when the main PLL is disabled.
+ * @param __PLLSOURCE__: specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
+ * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+ *
+ */
+#define __HAL_RCC_PLL_PLLSOURCE_CONFIG(__PLLSOURCE__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (__PLLSOURCE__))
+
+/** @brief Macro to configure the PLL multiplication factor.
+ * @note This function must be used only when the main PLL is disabled.
+ * @param __PLLM__: specifies the division factor for PLL VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note You have to set the PLLM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 2 MHz to limit PLL jitter.
+ *
+ */
+#define __HAL_RCC_PLL_PLLM_CONFIG(__PLLM__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, (__PLLM__))
+
+/** @defgroup RCC_PLL_I2S_Configuration PLL I2S Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the PLLI2S.
+ * @note The PLLI2S is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLLI2S_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = ENABLE)
+#define __HAL_RCC_PLLI2S_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = DISABLE)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Get_Clock_source Get Clock source
+ * @{
+ */
+/**
+ * @brief Macro to configure the system clock source.
+ * @param __RCC_SYSCLKSOURCE__: specifies the system clock source.
+ * This parameter can be one of the following values:
+ * - RCC_SYSCLKSOURCE_HSI: HSI oscillator is used as system clock source.
+ * - RCC_SYSCLKSOURCE_HSE: HSE oscillator is used as system clock source.
+ * - RCC_SYSCLKSOURCE_PLLCLK: PLL output is used as system clock source.
+ * - RCC_SYSCLKSOURCE_PLLRCLK: PLLR output is used as system clock source.
+ */
+#define __HAL_RCC_SYSCLK_CONFIG(__RCC_SYSCLKSOURCE__) MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__RCC_SYSCLKSOURCE__))
+
+/** @brief Macro to get the clock source used as system clock.
+ * @retval The clock source used as system clock. The returned value can be one
+ * of the following:
+ * - RCC_SYSCLKSOURCE_STATUS_HSI: HSI used as system clock.
+ * - RCC_SYSCLKSOURCE_STATUS_HSE: HSE used as system clock.
+ * - RCC_SYSCLKSOURCE_STATUS_PLLCLK: PLL used as system clock.
+ * - RCC_SYSCLKSOURCE_STATUS_PLLRCLK: PLLR used as system clock.
+ */
+#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(RCC->CFGR & RCC_CFGR_SWS))
+
+/** @brief Macro to get the oscillator used as PLL clock source.
+ * @retval The oscillator used as PLL clock source. The returned value can be one
+ * of the following:
+ * - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source.
+ * - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source.
+ */
+#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management
+ * @brief macros to manage the specified RCC Flags and interrupts.
+ * @{
+ */
+
+/** @brief Enable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to enable
+ * the selected interrupts).
+ * @param __INTERRUPT__: specifies the RCC interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ */
+#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__))
+
+/** @brief Disable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to disable
+ * the selected interrupts).
+ * @param __INTERRUPT__: specifies the RCC interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ */
+#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= ~(__INTERRUPT__))
+
+/** @brief Clear the RCC's interrupt pending bits (Perform Byte access to RCC_CIR[23:16]
+ * bits to clear the selected interrupt pending bits.
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ */
+#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__))
+
+/** @brief Check the RCC's interrupt has occurred or not.
+ * @param __INTERRUPT__: specifies the RCC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/** @brief Set RMVF bit to clear the reset flags: RCC_FLAG_PINRST, RCC_FLAG_PORRST,
+ * RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST and RCC_FLAG_LPWRRST.
+ */
+#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF)
+
+/** @brief Check RCC flag is set or not.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready.
+ * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready.
+ * @arg RCC_FLAG_PLLRDY: Main PLL clock ready.
+ * @arg RCC_FLAG_PLLI2SRDY: PLLI2S clock ready.
+ * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready.
+ * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready.
+ * @arg RCC_FLAG_BORRST: POR/PDR or BOR reset.
+ * @arg RCC_FLAG_PINRST: Pin reset.
+ * @arg RCC_FLAG_PORRST: POR/PDR reset.
+ * @arg RCC_FLAG_SFTRST: Software reset.
+ * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset.
+ * @arg RCC_FLAG_WWDGRST: Window Watchdog reset.
+ * @arg RCC_FLAG_LPWRRST: Low Power reset.
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define RCC_FLAG_MASK ((uint8_t)0x1F)
+#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5) == 1)? RCC->CR :((((__FLAG__) >> 5) == 2) ? RCC->BDCR :((((__FLAG__) >> 5) == 3)? RCC->CSR :RCC->CIR))) & ((uint32_t)1 << ((__FLAG__) & RCC_FLAG_MASK)))!= 0)? 1 : 0)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+ /** @addtogroup RCC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RCC_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions ******************************/
+void HAL_RCC_DeInit(void);
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency);
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_Exported_Functions_Group2
+ * @{
+ */
+/* Peripheral Control functions ************************************************/
+void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv);
+void HAL_RCC_EnableCSS(void);
+void HAL_RCC_DisableCSS(void);
+uint32_t HAL_RCC_GetSysClockFreq(void);
+uint32_t HAL_RCC_GetHCLKFreq(void);
+uint32_t HAL_RCC_GetPCLK1Freq(void);
+uint32_t HAL_RCC_GetPCLK2Freq(void);
+void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency);
+
+/* CSS NMI IRQ handler */
+void HAL_RCC_NMI_IRQHandler(void);
+
+/* User Callbacks in non blocking mode (IT mode) */
+void HAL_RCC_CSSCallback(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RCC_Private_Constants RCC Private Constants
+ * @{
+ */
+
+/** @defgroup RCC_BitAddress_AliasRegion RCC BitAddress AliasRegion
+ * @brief RCC registers bit address in the alias region
+ * @{
+ */
+#define RCC_OFFSET (RCC_BASE - PERIPH_BASE)
+/* --- CR Register ---*/
+/* Alias word address of HSION bit */
+#define RCC_CR_OFFSET (RCC_OFFSET + 0x00)
+#define RCC_HSION_BIT_NUMBER 0x00
+#define RCC_CR_HSION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_HSION_BIT_NUMBER * 4))
+/* Alias word address of CSSON bit */
+#define RCC_CSSON_BIT_NUMBER 0x13
+#define RCC_CR_CSSON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_CSSON_BIT_NUMBER * 4))
+/* Alias word address of PLLON bit */
+#define RCC_PLLON_BIT_NUMBER 0x18
+#define RCC_CR_PLLON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_PLLON_BIT_NUMBER * 4))
+/* Alias word address of PLLI2SON bit */
+#define RCC_PLLI2SON_BIT_NUMBER 0x1A
+#define RCC_CR_PLLI2SON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_PLLI2SON_BIT_NUMBER * 4))
+
+/* --- CFGR Register ---*/
+/* Alias word address of I2SSRC bit */
+#define RCC_CFGR_OFFSET (RCC_OFFSET + 0x08)
+#define RCC_I2SSRC_BIT_NUMBER 0x17
+#define RCC_CFGR_I2SSRC_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32) + (RCC_I2SSRC_BIT_NUMBER * 4))
+
+/* --- BDCR Register ---*/
+/* Alias word address of RTCEN bit */
+#define RCC_BDCR_OFFSET (RCC_OFFSET + 0x70)
+#define RCC_RTCEN_BIT_NUMBER 0x0F
+#define RCC_BDCR_RTCEN_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32) + (RCC_RTCEN_BIT_NUMBER * 4))
+/* Alias word address of BDRST bit */
+#define RCC_BDRST_BIT_NUMBER 0x10
+#define RCC_BDCR_BDRST_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32) + (RCC_BDRST_BIT_NUMBER * 4))
+
+/* --- CSR Register ---*/
+/* Alias word address of LSION bit */
+#define RCC_CSR_OFFSET (RCC_OFFSET + 0x74)
+#define RCC_LSION_BIT_NUMBER 0x00
+#define RCC_CSR_LSION_BB (PERIPH_BB_BASE + (RCC_CSR_OFFSET * 32) + (RCC_LSION_BIT_NUMBER * 4))
+
+/* CR register byte 3 (Bits[23:16]) base address */
+#define RCC_CR_BYTE2_ADDRESS ((uint32_t)0x40023802)
+
+/* CIR register byte 2 (Bits[15:8]) base address */
+#define RCC_CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + 0x0C + 0x01))
+
+/* CIR register byte 3 (Bits[23:16]) base address */
+#define RCC_CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + 0x0C + 0x02))
+
+/* BDCR register base address */
+#define RCC_BDCR_BYTE0_ADDRESS (PERIPH_BASE + RCC_BDCR_OFFSET)
+
+#define RCC_DBP_TIMEOUT_VALUE ((uint32_t)100)
+#define RCC_LSE_TIMEOUT_VALUE ((uint32_t)5000)
+
+#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT
+#define HSI_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
+#define LSI_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
+
+#define PLLI2S_TIMEOUT_VALUE ((uint32_t)100) /* Timeout value fixed to 100 ms */
+#define PLLSAI_TIMEOUT_VALUE ((uint32_t)100) /* Timeout value fixed to 100 ms */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup RCC_Private_Macros RCC Private Macros
+ * @{
+ */
+
+/** @defgroup RCC_IS_RCC_Definitions RCC Private macros to check input parameters
+ * @{
+ */
+#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) ((OSCILLATOR) <= 15)
+
+#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \
+ ((HSE) == RCC_HSE_BYPASS))
+
+#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \
+ ((LSE) == RCC_LSE_BYPASS))
+
+#define IS_RCC_HSI(HSI) (((HSI) == RCC_HSI_OFF) || ((HSI) == RCC_HSI_ON))
+
+#define IS_RCC_LSI(LSI) (((LSI) == RCC_LSI_OFF) || ((LSI) == RCC_LSI_ON))
+
+#define IS_RCC_PLL(PLL) (((PLL) == RCC_PLL_NONE) ||((PLL) == RCC_PLL_OFF) || ((PLL) == RCC_PLL_ON))
+
+#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \
+ ((SOURCE) == RCC_PLLSOURCE_HSE))
+
+#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_PLLRCLK))
+
+#define IS_RCC_PLLM_VALUE(VALUE) ((VALUE) <= 63)
+
+#define IS_RCC_PLLN_VALUE(VALUE) ((192 <= (VALUE)) && ((VALUE) <= 432))
+
+#define IS_RCC_PLLP_VALUE(VALUE) (((VALUE) == 2) || ((VALUE) == 4) || ((VALUE) == 6) || ((VALUE) == 8))
+
+#define IS_RCC_PLLQ_VALUE(VALUE) ((4 <= (VALUE)) && ((VALUE) <= 15))
+
+#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_DIV1) || ((HCLK) == RCC_SYSCLK_DIV2) || \
+ ((HCLK) == RCC_SYSCLK_DIV4) || ((HCLK) == RCC_SYSCLK_DIV8) || \
+ ((HCLK) == RCC_SYSCLK_DIV16) || ((HCLK) == RCC_SYSCLK_DIV64) || \
+ ((HCLK) == RCC_SYSCLK_DIV128) || ((HCLK) == RCC_SYSCLK_DIV256) || \
+ ((HCLK) == RCC_SYSCLK_DIV512))
+
+#define IS_RCC_CLOCKTYPE(CLK) ((1 <= (CLK)) && ((CLK) <= 15))
+
+#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_DIV1) || ((PCLK) == RCC_HCLK_DIV2) || \
+ ((PCLK) == RCC_HCLK_DIV4) || ((PCLK) == RCC_HCLK_DIV8) || \
+ ((PCLK) == RCC_HCLK_DIV16))
+
+#define IS_RCC_MCO(MCOx) (((MCOx) == RCC_MCO1) || ((MCOx) == RCC_MCO2))
+
+#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_HSI) || ((SOURCE) == RCC_MCO1SOURCE_LSE) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSE) || ((SOURCE) == RCC_MCO1SOURCE_PLLCLK))
+
+#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2SOURCE_SYSCLK) || ((SOURCE) == RCC_MCO2SOURCE_PLLI2SCLK)|| \
+ ((SOURCE) == RCC_MCO2SOURCE_HSE) || ((SOURCE) == RCC_MCO2SOURCE_PLLCLK))
+
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1) || ((DIV) == RCC_MCODIV_2) || \
+ ((DIV) == RCC_MCODIV_3) || ((DIV) == RCC_MCODIV_4) || \
+ ((DIV) == RCC_MCODIV_5))
+#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_RCC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_rcc_ex.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,2707 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rcc_ex.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of RCC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RCC_EX_H
+#define __STM32F4xx_HAL_RCC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Types RCCEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief RCC PLL configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PLLState; /*!< The new state of the PLL.
+ This parameter can be a value of @ref RCC_PLL_Config */
+
+ uint32_t PLLSource; /*!< RCC_PLLSource: PLL entry clock source.
+ This parameter must be a value of @ref RCC_PLL_Clock_Source */
+
+ uint32_t PLLM; /*!< PLLM: Division factor for PLL VCO input clock.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 63 */
+
+ uint32_t PLLN; /*!< PLLN: Multiplication factor for PLL VCO output clock.
+ This parameter must be a number between Min_Data = 192 and Max_Data = 432 */
+
+ uint32_t PLLP; /*!< PLLP: Division factor for main system clock (SYSCLK).
+ This parameter must be a value of @ref RCC_PLLP_Clock_Divider */
+
+ uint32_t PLLQ; /*!< PLLQ: Division factor for OTG FS, SDIO and RNG clocks.
+ This parameter must be a number between Min_Data = 4 and Max_Data = 15 */
+#if defined(STM32F446xx)
+ uint32_t PLLR; /*!< PLLR: PLL division factor for I2S, SAI, SYSTEM, SPDIFRX clocks.
+ This parameter is only available in STM32F446xx devices.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7 */
+#endif /* STM32F446xx */
+}RCC_PLLInitTypeDef;
+
+#if defined(STM32F446xx)
+/**
+ * @brief PLLI2S Clock structure definition
+ */
+typedef struct
+{
+ uint32_t PLLI2SM; /*!< Specifies division factor for PLL VCO input clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 63 */
+
+ uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+ This parameter must be a number between Min_Data = 192 and Max_Data = 432 */
+
+ uint32_t PLLI2SP; /*!< Specifies division factor for SPDIFRX Clock.
+ This parameter must be a value of @ref RCCEx_PLLI2SP_Clock_Divider */
+
+ uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+
+ uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S */
+}RCC_PLLI2SInitTypeDef;
+
+/**
+ * @brief PLLSAI Clock structure definition
+ */
+typedef struct
+{
+ uint32_t PLLSAIM; /*!< Spcifies division factor for PLL VCO input clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 63 */
+
+ uint32_t PLLSAIN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+ This parameter must be a number between Min_Data = 192 and Max_Data = 432 */
+
+ uint32_t PLLSAIP; /*!< Specifies division factor for OTG FS, SDIO and RNG clocks.
+ This parameter must be a value of @ref RCCEx_PLLSAIP_Clock_Divider */
+
+ uint32_t PLLSAIQ; /*!< Specifies the division factor for SAI clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ This parameter will be used only when PLLSAI is selected as Clock Source SAI */
+}RCC_PLLSAIInitTypeDef;
+/**
+ * @brief RCC extended clocks structure definition
+ */
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ RCC_PLLSAIInitTypeDef PLLSAI; /*!< PLL SAI structure parameters.
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */
+
+ uint32_t PLLI2SDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 32
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+
+ uint32_t PLLSAIDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 32
+ This parameter will be used only when PLLSAI is selected as Clock Source SAI */
+
+ uint32_t Sai1ClockSelection; /*!< Specifies SAI1 Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_SAI1_Clock_Source */
+
+ uint32_t Sai2ClockSelection; /*!< Specifies SAI2 Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_SAI2_Clock_Source */
+
+ uint32_t I2sApb1ClockSelection; /*!< Specifies I2S APB1 Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_I2SAPB1_Clock_Source */
+
+ uint32_t I2sApb2ClockSelection; /*!< Specifies I2S APB2 Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_I2SAPB2_Clock_Source */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Source Selection.
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t SdioClockSelection; /*!< Specifies SDIO Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_SDIO_Clock_Source */
+
+ uint32_t CecClockSelection; /*!< Specifies CEC Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+ uint32_t Fmpi2c1ClockSelection; /*!< Specifies FMPI2C1 Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_FMPI2C1_Clock_Source */
+
+ uint32_t SpdifClockSelection; /*!< Specifies SPDIFRX Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_SPDIFRX_Clock_Source */
+
+ uint32_t Clk48ClockSelection; /*!< Specifies CK48 Clock Selection this clock used OTG FS, SDIO and RNG clocks.
+ This parameter can be a value of @ref RCCEx_CK48_Clock_Source */
+
+ uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection.
+ This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F446xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/**
+ * @brief PLLI2S Clock structure definition
+ */
+typedef struct
+{
+ uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+ This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+}RCC_PLLI2SInitTypeDef;
+
+/**
+ * @brief PLLSAI Clock structure definition
+ */
+typedef struct
+{
+ uint32_t PLLSAIN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+ This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+ This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */
+
+ uint32_t PLLSAIQ; /*!< Specifies the division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */
+
+ uint32_t PLLSAIR; /*!< specifies the division factor for LTDC clock
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ This parameter will be used only when PLLSAI is selected as Clock Source LTDC */
+
+}RCC_PLLSAIInitTypeDef;
+/**
+ * @brief RCC extended clocks structure definition
+ */
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ RCC_PLLSAIInitTypeDef PLLSAI; /*!< PLL SAI structure parameters.
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */
+
+ uint32_t PLLI2SDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 32
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+
+ uint32_t PLLSAIDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 32
+ This parameter will be used only when PLLSAI is selected as Clock Source SAI */
+
+ uint32_t PLLSAIDivR; /*!< Specifies the PLLSAI division factor for LTDC clock.
+ This parameter must be one value of @ref RCCEx_PLLSAI_DIVR */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection.
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint8_t TIMPresSelection; /*!< Specifies TIM Clock Prescalers Selection.
+ This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+/**
+ * @brief PLLI2S Clock structure definition
+ */
+typedef struct
+{
+#if defined(STM32F411xE)
+ uint32_t PLLI2SM; /*!< PLLM: Division factor for PLLI2S VCO input clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 62 */
+#endif /* STM32F411xE */
+
+ uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+ This parameter must be a number between Min_Data = 192 and Max_Data = 432
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+}RCC_PLLI2SInitTypeDef;
+
+
+/**
+ * @brief RCC extended clocks structure definition
+ */
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection.
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants
+ * @{
+ */
+
+/** @defgroup RCCEx_Periph_Clock_Selection RCC Periph Clock Selection
+ * @{
+ */
+/*------------------------------- Peripheral Clock source for STM32F446xx -----------------------------*/
+#if defined(STM32F446xx)
+#define RCC_PERIPHCLK_I2S_APB1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_I2S_APB2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_SAI1 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_SAI2 ((uint32_t)0x00000008)
+#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000010)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_CEC ((uint32_t)0x00000040)
+#define RCC_PERIPHCLK_FMPI2C1 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_CK48 ((uint32_t)0x00000100)
+#define RCC_PERIPHCLK_SDIO ((uint32_t)0x00000200)
+#define RCC_PERIPHCLK_SPDIFRX ((uint32_t)0x00000400)
+#define RCC_PERIPHCLK_PLLI2S ((uint32_t)0x00000800)
+#endif /* STM32F446xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------- Peripheral Clock source for STM32F42xxx/STM32F43xxx ---------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_SAI_PLLI2S ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_SAI_PLLSAI ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_LTDC ((uint32_t)0x00000008)
+#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000010)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_PLLI2S ((uint32_t)0x00000040)
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*------------------------ Peripheral Clock source for STM32F40xxx/STM32F41xxx ------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_PLLI2S ((uint32_t)0x00000004)
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+/*-----------------------------------------------------------------------------------------------------*/
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_PLLSAI_DIVR RCC PLLSAI DIVR
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+#define RCC_PLLSAIDIVR_2 ((uint32_t)0x00000000)
+#define RCC_PLLSAIDIVR_4 ((uint32_t)0x00010000)
+#define RCC_PLLSAIDIVR_8 ((uint32_t)0x00020000)
+#define RCC_PLLSAIDIVR_16 ((uint32_t)0x00030000)
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_PLLI2SP_Clock_Divider RCC PLLI2SP Clock Divider
+ * @{
+ */
+#if defined(STM32F446xx)
+#define RCC_PLLI2SP_DIV2 ((uint32_t)0x00000002)
+#define RCC_PLLI2SP_DIV4 ((uint32_t)0x00000004)
+#define RCC_PLLI2SP_DIV6 ((uint32_t)0x00000006)
+#define RCC_PLLI2SP_DIV8 ((uint32_t)0x00000008)
+#endif /* STM32F446xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_PLLSAIP_Clock_Divider RCC PLLSAIP Clock Divider
+ * @{
+ */
+#if defined(STM32F446xx)
+#define RCC_PLLSAIP_DIV2 ((uint32_t)0x00000002)
+#define RCC_PLLSAIP_DIV4 ((uint32_t)0x00000004)
+#define RCC_PLLSAIP_DIV6 ((uint32_t)0x00000006)
+#define RCC_PLLSAIP_DIV8 ((uint32_t)0x00000008)
+#endif /* STM32F446xx */
+/**
+ * @}
+ */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/** @defgroup RCCEx_SAI_BlockA_Clock_Source RCC SAI BlockA Clock Source
+ * @{
+ */
+#define RCC_SAIACLKSOURCE_PLLSAI ((uint32_t)0x00000000)
+#define RCC_SAIACLKSOURCE_PLLI2S ((uint32_t)0x00100000)
+#define RCC_SAIACLKSOURCE_EXT ((uint32_t)0x00200000)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SAI_BlockB_Clock_Source RCC SAI BlockB Clock Source
+ * @{
+ */
+#define RCC_SAIBCLKSOURCE_PLLSAI ((uint32_t)0x00000000)
+#define RCC_SAIBCLKSOURCE_PLLI2S ((uint32_t)0x00400000)
+#define RCC_SAIBCLKSOURCE_EXT ((uint32_t)0x00800000)
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F446xx)
+/** @defgroup RCCEx_SAI1_Clock_Source RCC SAI1 Clock Source
+ * @{
+ */
+#define RCC_SAI1CLKSOURCE_PLLSAI ((uint32_t)0x00000000)
+#define RCC_SAI1CLKSOURCE_PLLI2S ((uint32_t)RCC_DCKCFGR_SAI1SRC_0)
+#define RCC_SAI1CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_SAI1SRC_1)
+#define RCC_SAI1CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_SAI1SRC)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SAI2_Clock_Source RCC SAI2 Clock Source
+ * @{
+ */
+#define RCC_SAI2CLKSOURCE_PLLSAI ((uint32_t)0x00000000)
+#define RCC_SAI2CLKSOURCE_PLLI2S ((uint32_t)RCC_DCKCFGR_SAI2SRC_0)
+#define RCC_SAI2CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_SAI2SRC_1)
+#define RCC_SAI2CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_SAI2SRC)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2SAPB1_Clock_Source RCC I2S APB1 Clock Source
+ * @{
+ */
+#define RCC_I2SAPB1CLKSOURCE_PLLI2S ((uint32_t)0x00000000)
+#define RCC_I2SAPB1CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S1SRC_0)
+#define RCC_I2SAPB1CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S1SRC_1)
+#define RCC_I2SAPB1CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S1SRC)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2SAPB2_Clock_Source RCC I2S APB2 Clock Source
+ * @{
+ */
+#define RCC_I2SAPB2CLKSOURCE_PLLI2S ((uint32_t)0x00000000)
+#define RCC_I2SAPB2CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S2SRC_0)
+#define RCC_I2SAPB2CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S2SRC_1)
+#define RCC_I2SAPB2CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S2SRC)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_FMPI2C1_Clock_Source RCC FMPI2C1 Clock Source
+ * @{
+ */
+#define RCC_FMPI2C1CLKSOURCE_APB ((uint32_t)0x00000000)
+#define RCC_FMPI2C1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_0)
+#define RCC_FMPI2C1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_1)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CEC_Clock_Source RCC CEC Clock Source
+ * @{
+ */
+#define RCC_CECCLKSOURCE_HSI ((uint32_t)0x00000000)
+#define RCC_CECCLKSOURCE_LSE ((uint32_t)RCC_DCKCFGR2_CECSEL)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CK48_Clock_Source RCC CK48 Clock Source
+ * @{
+ */
+#define RCC_CK48CLKSOURCE_PLLQ ((uint32_t)0x00000000)
+#define RCC_CK48CLKSOURCE_PLLSAIP ((uint32_t)RCC_DCKCFGR2_CK48MSEL)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SDIO_Clock_Source RCC SDIO Clock Source
+ * @{
+ */
+#define RCC_SDIOCLKSOURCE_CK48 ((uint32_t)0x00000000)
+#define RCC_SDIOCLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_SDIOSEL)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SPDIFRX_Clock_Source RCC SPDIFRX Clock Source
+ * @{
+ */
+#define RCC_SPDIFRXCLKSOURCE_PLLR ((uint32_t)0x00000000)
+#define RCC_SPDIFRXCLKSOURCE_PLLI2SP ((uint32_t)RCC_DCKCFGR2_SPDIFRXSEL)
+/**
+ * @}
+ */
+
+#endif /* STM32F446xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+/** @defgroup RCCEx_TIM_PRescaler_Selection RCC TIM PRescaler Selection
+ * @{
+ */
+#define RCC_TIMPRES_DESACTIVATED ((uint8_t)0x00)
+#define RCC_TIMPRES_ACTIVATED ((uint8_t)0x01)
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx) || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+
+#if defined(STM32F411xE) || defined(STM32F446xx)
+/** @defgroup RCCEx_LSE_Dual_Mode_Selection RCC LSE Dual Mode Selection
+ * @{
+ */
+#define RCC_LSE_LOWPOWER_MODE ((uint8_t)0x00)
+#define RCC_LSE_HIGHDRIVE_MODE ((uint8_t)0x01)
+/**
+ * @}
+ */
+#endif /* STM32F411xE || STM32F446xx */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros
+ * @{
+ */
+/*------------------------------- STM32F42xxx/STM32F43xxx ----------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+/** @brief Enables or disables the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_GPIOI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOJ_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOK_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DMA2D_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ETHMACPTP_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
+#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
+#define __HAL_RCC_GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN))
+#define __HAL_RCC_GPIOJ_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOJEN))
+#define __HAL_RCC_GPIOK_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOKEN))
+#define __HAL_RCC_DMA2D_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2DEN))
+#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN))
+#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN))
+#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN))
+#define __HAL_RCC_ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN))
+
+/**
+ * @brief Enable ETHERNET clock.
+ */
+#define __HAL_RCC_ETH_CLK_ENABLE() do { \
+ __HAL_RCC_ETHMAC_CLK_ENABLE(); \
+ __HAL_RCC_ETHMACTX_CLK_ENABLE(); \
+ __HAL_RCC_ETHMACRX_CLK_ENABLE(); \
+ } while(0)
+/**
+ * @brief Disable ETHERNET clock.
+ */
+#define __HAL_RCC_ETH_CLK_DISABLE() do { \
+ __HAL_RCC_ETHMACTX_CLK_DISABLE(); \
+ __HAL_RCC_ETHMACRX_CLK_DISABLE(); \
+ __HAL_RCC_ETHMAC_CLK_DISABLE(); \
+ } while(0)
+
+/** @brief Enable or disable the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+
+#define __HAL_RCC_DCMI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN))
+
+#if defined(STM32F437xx)|| defined(STM32F439xx)
+#define __HAL_RCC_CRYP_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_HASH_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN))
+#define __HAL_RCC_HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN))
+#endif /* STM32F437xx || STM32F439xx */
+
+/** @brief Enables or disables the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_FMC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN))
+
+/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM7_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM12_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM13_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USART3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_UART4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_UART5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CAN1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CAN2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DAC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_UART7_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_UART8_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
+#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
+#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
+#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
+#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+#define __HAL_RCC_UART7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART7EN))
+#define __HAL_RCC_UART8_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART8EN))
+
+/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_TIM8_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ADC2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ADC3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SAI1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
+#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
+#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
+#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN))
+#define __HAL_RCC_SPI6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI6EN))
+#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN))
+
+#if defined(STM32F429xx)|| defined(STM32F439xx)
+#define __HAL_RCC_LTDC_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_LTDCEN))
+
+#define __HAL_RCC_LTDC_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_LTDCEN))
+#endif /* STM32F429xx || STM32F439xx */
+
+/** @brief Force or release AHB1 peripheral reset.
+ */
+#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST))
+#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST))
+#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST))
+#define __HAL_RCC_GPIOJ_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOJRST))
+#define __HAL_RCC_GPIOK_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOKRST))
+#define __HAL_RCC_DMA2D_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2DRST))
+
+#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST))
+#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST))
+#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST))
+#define __HAL_RCC_GPIOJ_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOJRST))
+#define __HAL_RCC_GPIOK_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOKRST))
+#define __HAL_RCC_DMA2D_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2DRST))
+
+/** @brief Force or release AHB2 peripheral reset.
+ */
+#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST))
+#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST))
+
+#if defined(STM32F437xx)|| defined(STM32F439xx)
+#define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST))
+#define __HAL_RCC_HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST))
+
+#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST))
+#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST))
+#endif /* STM32F437xx || STM32F439xx */
+
+/** @brief Force or release AHB3 peripheral reset
+ */
+#define __HAL_RCC_FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST))
+#define __HAL_RCC_FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST))
+
+/** @brief Force or release APB1 peripheral reset.
+ */
+#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+#define __HAL_RCC_UART7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART7RST))
+#define __HAL_RCC_UART8_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART8RST))
+
+#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+#define __HAL_RCC_UART7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART7RST))
+#define __HAL_RCC_UART8_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART8RST))
+
+/** @brief Force or release APB2 peripheral reset.
+ */
+#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST))
+#define __HAL_RCC_SPI6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI6RST))
+#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST))
+
+#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST))
+#define __HAL_RCC_SPI6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI6RST))
+#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST))
+
+#if defined(STM32F429xx)|| defined(STM32F439xx)
+#define __HAL_RCC_LTDC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_LTDCRST))
+#define __HAL_RCC_LTDC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_LTDCRST))
+#endif /* STM32F429xx|| STM32F439xx */
+
+/** @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN))
+#define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN))
+#define __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOJLPEN))
+#define __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOKLPEN))
+#define __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM3LPEN))
+#define __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2DLPEN))
+
+#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN))
+#define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN))
+#define __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOJLPEN))
+#define __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOKLPEN))
+#define __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2DLPEN))
+
+/** @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN))
+#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN))
+
+#if defined(STM32F437xx)|| defined(STM32F439xx)
+#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN))
+#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN))
+
+#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN))
+#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN))
+#endif /* STM32F437xx || STM32F439xx */
+
+/** @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN))
+#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN))
+
+/** @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
+#define __HAL_RCC_UART7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART7LPEN))
+#define __HAL_RCC_UART8_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART8LPEN))
+
+#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
+#define __HAL_RCC_UART7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART7LPEN))
+#define __HAL_RCC_UART8_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART8LPEN))
+
+/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN))
+#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN))
+#define __HAL_RCC_SPI6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI6LPEN))
+#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN))
+
+#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN))
+#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN))
+#define __HAL_RCC_SPI6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI6LPEN))
+#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN))
+
+#if defined(STM32F429xx)|| defined(STM32F439xx)
+#define __HAL_RCC_LTDC_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_LTDCLPEN))
+
+#define __HAL_RCC_LTDC_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_LTDCLPEN))
+#endif /* STM32F429xx || STM32F439xx */
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+/*---------------------------------------------------------------------------------------------*/
+
+/*----------------------------------- STM32F40xxx/STM32F41xxx----------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+/** @brief Enables or disables the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_GPIOI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
+#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
+#define __HAL_RCC_GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN))
+
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+/**
+ * @brief Enable ETHERNET clock.
+ */
+#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ETHMACPTP_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ETH_CLK_ENABLE() do { \
+ __HAL_RCC_ETHMAC_CLK_ENABLE(); \
+ __HAL_RCC_ETHMACTX_CLK_ENABLE(); \
+ __HAL_RCC_ETHMACRX_CLK_ENABLE(); \
+ } while(0)
+
+/**
+ * @brief Disable ETHERNET clock.
+ */
+#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN))
+#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN))
+#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN))
+#define __HAL_RCC_ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN))
+#define __HAL_RCC_ETH_CLK_DISABLE() do { \
+ __HAL_RCC_ETHMACTX_CLK_DISABLE(); \
+ __HAL_RCC_ETHMACRX_CLK_DISABLE(); \
+ __HAL_RCC_ETHMAC_CLK_DISABLE(); \
+ } while(0)
+#endif /* STM32F407xx || STM32F417xx */
+
+/** @brief Enable or disable the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+#define __HAL_RCC_DCMI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN))
+#endif /* STM32F407xx || STM32F417xx */
+
+#if defined(STM32F415xx) || defined(STM32F417xx)
+#define __HAL_RCC_CRYP_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_HASH_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN))
+#define __HAL_RCC_HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN))
+#endif /* STM32F415xx || STM32F417xx */
+
+/** @brief Enables or disables the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_FSMC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_FSMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FSMCEN))
+
+/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM7_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM12_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM13_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USART3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_UART4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_UART5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CAN1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CAN2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DAC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
+#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
+#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
+#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
+#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+
+/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_TIM8_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ADC2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ADC3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
+#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
+#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
+
+/** @brief Force or release AHB1 peripheral reset.
+ */
+#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST))
+#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST))
+#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST))
+
+#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST))
+#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST))
+#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST))
+
+/** @brief Force or release AHB2 peripheral reset.
+ */
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST))
+#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST))
+#endif /* STM32F407xx || STM32F417xx */
+
+#if defined(STM32F415xx) || defined(STM32F417xx)
+#define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST))
+#define __HAL_RCC_HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST))
+
+#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST))
+#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST))
+
+#endif /* STM32F415xx || STM32F417xx */
+
+/** @brief Force or release AHB3 peripheral reset
+ */
+#define __HAL_RCC_FSMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FSMCRST))
+#define __HAL_RCC_FSMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FSMCRST))
+
+/** @brief Force or release APB1 peripheral reset.
+ */
+#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+
+#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+
+/** @brief Force or release APB2 peripheral reset.
+ */
+#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
+
+/** @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN))
+#define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN))
+
+#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN))
+#define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN))
+
+/** @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN))
+#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN))
+#endif /* STM32F407xx || STM32F417xx */
+
+#if defined(STM32F415xx) || defined(STM32F417xx)
+#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN))
+#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN))
+
+#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN))
+#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN))
+#endif /* STM32F415xx || STM32F417xx */
+
+/** @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_FSMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FSMCLPEN))
+#define __HAL_RCC_FSMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FSMCLPEN))
+
+/** @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
+
+#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
+
+/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN))
+
+#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+/*---------------------------------------------------------------------------------------------*/
+
+/*------------------------------------------ STM32F411xx --------------------------------------*/
+#if defined(STM32F411xE)
+/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ */
+#define __HAL_RCC_SPI5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN))
+
+/** @brief Force or release APB2 peripheral reset.
+ */
+#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST))
+#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST))
+
+/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ */
+#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN))
+#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN))
+
+#endif /* STM32F411xE */
+/*---------------------------------------------------------------------------------------------*/
+
+/*----------------------------------------- STM32F446xx ---------------------------------------*/
+#if defined(STM32F446xx)
+/** @brief Enables or disables the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
+#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN))
+
+/** @brief Enable or disable the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_DCMI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN))
+
+/** @brief Enables or disables the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_FMC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_QSPI_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN))
+#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN))
+
+/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_TIM6_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM7_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM12_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM13_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_TIM14_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SPDIFRX_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_USART3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_UART4_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_UART5_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_FMPI2C1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CAN1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CAN2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_CEC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_DAC_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __HAL_RCC_SPDIFRX_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPDIFRXEN))
+#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
+#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
+#define __HAL_RCC_FMPI2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_FMPI2C1EN))
+#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
+#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
+#define __HAL_RCC_CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN))
+#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+
+/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __HAL_RCC_TIM8_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ADC2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_ADC3_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SAI1_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+#define __HAL_RCC_SAI2_CLK_ENABLE() do { \
+ __IO uint32_t tmpreg; \
+ SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\
+ /* Delay after an RCC peripheral clock enabling */ \
+ tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\
+ UNUSED(tmpreg); \
+ } while(0)
+
+#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
+#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
+#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
+#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN))
+#define __HAL_RCC_SAI2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI2EN))
+
+/** @brief Force or release AHB1 peripheral reset.
+ */
+#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST))
+
+#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
+#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
+#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST))
+
+/** @brief Force or release AHB2 peripheral reset.
+ */
+#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST))
+#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST))
+
+/** @brief Force or release AHB3 peripheral reset
+ */
+#define __HAL_RCC_FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST))
+#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST))
+
+#define __HAL_RCC_FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST))
+#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST))
+
+/** @brief Force or release APB1 peripheral reset.
+ */
+#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_SPDIFRX_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPDIFRXRST))
+#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_FMPI2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_FMPI2C1RST))
+#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST))
+#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+
+#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __HAL_RCC_SPDIFRX_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPDIFRXRST))
+#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
+#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
+#define __HAL_RCC_FMPI2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_FMPI2C1RST))
+#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
+#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
+#define __HAL_RCC_CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST))
+#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+
+/** @brief Force or release APB2 peripheral reset.
+ */
+#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST))
+#define __HAL_RCC_SAI2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI2RST))
+
+#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
+#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST))
+#define __HAL_RCC_SAI2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI2RST))
+
+/** @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN))
+
+#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
+#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
+#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN))
+#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN))
+#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN))
+/** @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN))
+#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN))
+
+/** @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN))
+#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN))
+
+#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN))
+#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN))
+
+/** @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_SPDIFRX_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPDIFRXLPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_FMPI2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_FMPI2C1LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_CEC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CECLPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
+
+#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
+#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
+#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
+#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
+#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
+#define __HAL_RCC_SPDIFRX_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPDIFRXLPEN))
+#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
+#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN))
+#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN))
+#define __HAL_RCC_FMPI2C1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_FMPI2C1LPEN))
+#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
+#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
+#define __HAL_RCC_CEC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CECLPEN))
+#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
+
+/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN))
+#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN))
+#define __HAL_RCC_SAI2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI2LPEN))
+
+#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
+#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN))
+#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN))
+#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN))
+#define __HAL_RCC_SAI2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI2LPEN))
+
+#endif /* STM32F446xx */
+/*------------------------------------------------------------------------------------------------------------*/
+
+/*------------------------------------------------- PLL Configuration ----------------------------------------*/
+#if defined(STM32F446xx)
+/** @brief Macro to configure the main PLL clock source, multiplication and division factors.
+ * @note This function must be used only when the main PLL is disabled.
+ * @param __RCC_PLLSource__: specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
+ * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+ * @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S.
+ * @param __PLLM__: specifies the division factor for PLL VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note You have to set the PLLM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 2 MHz to limit PLL jitter.
+ * @param __PLLN__: specifies the multiplication factor for PLL VCO output clock
+ * This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+ * @note You have to set the PLLN parameter correctly to ensure that the VCO
+ * output frequency is between 192 and 432 MHz.
+ *
+ * @param __PLLP__: specifies the division factor for main system clock (SYSCLK)
+ * This parameter must be a number in the range {2, 4, 6, or 8}.
+ *
+ * @param __PLLQ__: specifies the division factor for OTG FS, SDIO and RNG clocks
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ * @note If the USB OTG FS is used in your application, you have to set the
+ * PLLQ parameter correctly to have 48 MHz clock for the USB. However,
+ * the SDIO and RNG need a frequency lower than or equal to 48 MHz to work
+ * correctly.
+ *
+ * @param __PLLR__: PLL division factor for I2S, SAI, SYSTEM, SPDIFRX clocks.
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note This parameter is only available in STM32F446xx devices.
+ *
+ */
+#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__,__PLLR__) \
+ (RCC->PLLCFGR = ((__RCC_PLLSource__) | (__PLLM__) | \
+ ((__PLLN__) << POSITION_VAL(RCC_PLLCFGR_PLLN)) | \
+ ((((__PLLP__) >> 1) -1) << POSITION_VAL(RCC_PLLCFGR_PLLP)) | \
+ ((__PLLQ__) << POSITION_VAL(RCC_PLLCFGR_PLLQ)) | \
+ ((__PLLR__) << POSITION_VAL(RCC_PLLCFGR_PLLR))))
+#else
+/** @brief Macro to configure the main PLL clock source, multiplication and division factors.
+ * @note This function must be used only when the main PLL is disabled.
+ * @param __RCC_PLLSource__: specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
+ * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+ * @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S.
+ * @param __PLLM__: specifies the division factor for PLL VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note You have to set the PLLM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 2 MHz to limit PLL jitter.
+ * @param __PLLN__: specifies the multiplication factor for PLL VCO output clock
+ * This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+ * @note You have to set the PLLN parameter correctly to ensure that the VCO
+ * output frequency is between 192 and 432 MHz.
+ *
+ * @param __PLLP__: specifies the division factor for main system clock (SYSCLK)
+ * This parameter must be a number in the range {2, 4, 6, or 8}.
+ *
+ * @param __PLLQ__: specifies the division factor for OTG FS, SDIO and RNG clocks
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ * @note If the USB OTG FS is used in your application, you have to set the
+ * PLLQ parameter correctly to have 48 MHz clock for the USB. However,
+ * the SDIO and RNG need a frequency lower than or equal to 48 MHz to work
+ * correctly.
+ *
+ */
+#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__) \
+ (RCC->PLLCFGR = (0x20000000 | (__RCC_PLLSource__) | (__PLLM__)| \
+ ((__PLLN__) << POSITION_VAL(RCC_PLLCFGR_PLLN)) | \
+ ((((__PLLP__) >> 1) -1) << POSITION_VAL(RCC_PLLCFGR_PLLP)) | \
+ ((__PLLQ__) << POSITION_VAL(RCC_PLLCFGR_PLLQ))))
+ #endif /* STM32F446xx */
+/*-------------------------------------------------------------------------------------------------------*/
+
+/*------------------------------------------- PLLI2S Configuration --------------------------------------*/
+#if defined(STM32F446xx)
+/** @brief Macro to configure the PLLI2S clock multiplication and division factors .
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note PLLI2S clock source is common with the main PLL (configured in
+ * HAL_RCC_ClockConfig() API).
+ * @param __PLLI2SM__: specifies the division factor for PLLI2S VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 1 MHz to limit PLLI2S jitter.
+ * @note The PLLI2SM parameter is only used with STM32F411xE and STM32F446xx Devices
+ *
+ * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock
+ * This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+ * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
+ *
+ * @param __PLLI2SP__: specifies division factor for SPDIFRX Clock.
+ * This parameter must be a number in the range {2, 4, 6, or 8}.
+ * @note the PLLI2SP parameter is only available with STM32F446xx Devices
+ *
+ * @param __PLLI2SR__: specifies the division factor for I2S clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+ * on the I2S clock frequency.
+ *
+ * @param __PLLI2SQ__: specifies the division factor for SAI clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ * @note the PLLI2SQ parameter is only available with STM32F427/437/429x/439xx Devices
+ *
+ */
+#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SP__, __PLLI2SQ__, __PLLI2SR__) \
+ (RCC->PLLI2SCFGR = ((__PLLI2SM__) |\
+ ((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN)) |\
+ ((((__PLLI2SP__) >> 1) -1) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP)) |\
+ ((__PLLI2SQ__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ)) |\
+ ((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR))))
+#else
+/** @brief Macro to configure the PLLI2S clock multiplication and division factors .
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note PLLI2S clock source is common with the main PLL (configured in
+ * HAL_RCC_ClockConfig() API).
+ * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock
+ * This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+ * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
+ * @param __PLLI2SR__: specifies the division factor for I2S clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+ * on the I2S clock frequency.
+ *
+ */
+#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SN__, __PLLI2SR__) \
+ (RCC->PLLI2SCFGR = (((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN)) | \
+ ((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR))))
+#endif /* STM32F446xx */
+
+#if defined(STM32F411xE)
+
+/** @brief Macro to configure the PLLI2S clock multiplication and division factors .
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note PLLI2S clock source is common with the main PLL (configured in
+ * HAL_RCC_ClockConfig() API).
+ * @param __PLLI2SM__: specifies the division factor for PLLI2S VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note The PLLI2SM parameter is only used with STM32F411xE Devices
+ * @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 2 MHz to limit PLLI2S jitter.
+ * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock
+ * This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+ * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
+ * @param __PLLI2SR__: specifies the division factor for I2S clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+ * on the I2S clock frequency.
+ */
+#define __HAL_RCC_PLLI2S_I2SCLK_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SM__) |\
+ ((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN)) |\
+ ((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR))))
+#endif /* STM32F411xE */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/** @brief Macro used by the SAI HAL driver to configure the PLLI2S clock multiplication and division factors.
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note PLLI2S clock source is common with the main PLL (configured in
+ * HAL_RCC_ClockConfig() API)
+ * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock.
+ * This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+ * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
+ * @param __PLLI2SQ__: specifies the division factor for SAI1 clock.
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ * @note the PLLI2SQ parameter is only available with STM32F427xx/437xx/429xx/439xx Devices
+ * and can be configured using the __HAL_RCC_PLLI2S_PLLSAICLK_CONFIG() macro
+ * @param __PLLI2SR__: specifies the division factor for I2S clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+ * on the I2S clock frequency.
+ */
+#define __HAL_RCC_PLLI2S_SAICLK_CONFIG(__PLLI2SN__, __PLLI2SQ__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SN__) << 6) |\
+ ((__PLLI2SQ__) << 24) |\
+ ((__PLLI2SR__) << 28))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/*----------------------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------------------- PLLSAI Configuration ---------------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+/** @brief Macros to Enable or Disable the PLLISAI.
+ * @note The PLLSAI is only available with STM32F429x/439x Devices.
+ * @note The PLLSAI is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLLSAI_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLSAION_BB = ENABLE)
+#define __HAL_RCC_PLLSAI_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLSAION_BB = DISABLE)
+
+#if defined(STM32F446xx)
+/** @brief Macro to configure the PLLSAI clock multiplication and division factors.
+ *
+ * @param __PLLSAIM__: specifies the division factor for PLLSAI VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note You have to set the PLLSAIM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 1 MHz to limit PLLI2S jitter.
+ * @note The PLLSAIM parameter is only used with STM32F446xx Devices
+ *
+ * @param __PLLSAIN__: specifies the multiplication factor for PLLSAI VCO output clock.
+ * This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+ * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
+ *
+ * @param __PLLSAIP__: specifies division factor for OTG FS, SDIO and RNG clocks.
+ * This parameter must be a number in the range {2, 4, 6, or 8}.
+ * @note the PLLSAIP parameter is only available with STM32F446xx Devices
+ *
+ * @param __PLLSAIQ__: specifies the division factor for SAI clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ *
+ * @param __PLLSAIR__: specifies the division factor for LTDC clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note the PLLI2SR parameter is only available with STM32F427/437/429/439xx Devices
+ */
+#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIM__, __PLLSAIN__, __PLLSAIP__, __PLLSAIQ__, __PLLSAIR__) \
+ (RCC->PLLSAICFGR = ((__PLLSAIM__) | \
+ ((__PLLSAIN__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN)) | \
+ ((((__PLLSAIP__) >> 1) -1) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIP)) | \
+ ((__PLLSAIQ__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ))))
+#endif /* STM32F446xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/** @brief Macro to configure the PLLSAI clock multiplication and division factors.
+ *
+ * @param __PLLSAIN__: specifies the multiplication factor for PLLSAI VCO output clock.
+ * This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+ * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
+ *
+ * @param __PLLSAIQ__: specifies the division factor for SAI clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ *
+ * @param __PLLSAIR__: specifies the division factor for LTDC clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note the PLLI2SR parameter is only available with STM32F427/437/429/439xx Devices
+ */
+#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIQ__, __PLLSAIR__) \
+ (RCC->PLLSAICFGR = (((__PLLSAIN__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN)) | \
+ ((__PLLSAIQ__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ)) | \
+ ((__PLLSAIR__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR))))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+/*----------------------------------------------------------------------------------------------------------------------*/
+
+/*----------------------------------------- PLLSAI/PLLI2S Dividers Configuration ---------------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+/** @brief Macro to configure the SAI clock Divider coming from PLLI2S.
+ * @note This function must be called before enabling the PLLI2S.
+ * @param __PLLI2SDivQ__: specifies the PLLI2S division factor for SAI1 clock .
+ * This parameter must be a number between 1 and 32.
+ * SAI1 clock frequency = f(PLLI2SQ) / __PLLI2SDivQ__
+ */
+#define __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(__PLLI2SDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVQ, (__PLLI2SDivQ__)-1))
+
+/** @brief Macro to configure the SAI clock Divider coming from PLLSAI.
+ * @note This function must be called before enabling the PLLSAI.
+ * @param __PLLSAIDivQ__: specifies the PLLSAI division factor for SAI1 clock .
+ * This parameter must be a number between Min_Data = 1 and Max_Data = 32.
+ * SAI1 clock frequency = f(PLLSAIQ) / __PLLSAIDivQ__
+ */
+#define __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(__PLLSAIDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVQ, ((__PLLSAIDivQ__)-1)<<8))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/** @brief Macro to configure the LTDC clock Divider coming from PLLSAI.
+ *
+ * @note The LTDC peripheral is only available with STM32F427/437/429/439xx Devices.
+ * @note This function must be called before enabling the PLLSAI.
+ * @param __PLLSAIDivR__: specifies the PLLSAI division factor for LTDC clock .
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 16.
+ * LTDC clock frequency = f(PLLSAIR) / __PLLSAIDivR__
+ */
+#define __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(__PLLSAIDivR__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVR, (__PLLSAIDivR__)))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/*-----------------------------------------------------------------------------------------------------------------------------------*/
+
+/*-------------------------------------------------- Peripheral Clock selection -----------------------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+/** @brief Macro to configure the I2S clock source (I2SCLK).
+ * @note This function must be called before enabling the I2S APB clock.
+ * @param __SOURCE__: specifies the I2S clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2SCLKSOURCE_PLLI2S: PLLI2S clock used as I2S clock source.
+ * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source.
+ */
+#define __HAL_RCC_I2S_CONFIG(__SOURCE__) (*(__IO uint32_t *) RCC_CFGR_I2SSRC_BB = (__SOURCE__))
+#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/** @brief Macro to configure SAI1BlockA clock source selection.
+ * @note The SAI peripheral is only available with STM32F427/437/429/439xx Devices.
+ * @note This function must be called before enabling PLLSAI, PLLI2S and
+ * the SAI clock.
+ * @param __SOURCE__: specifies the SAI Block A clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SAIACLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
+ * as SAI1 Block A clock.
+ * @arg RCC_SAIACLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
+ * as SAI1 Block A clock.
+ * @arg RCC_SAIACLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin
+ * used as SAI1 Block A clock.
+ */
+#define __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1ASRC, (__SOURCE__)))
+
+/** @brief Macro to configure SAI1BlockB clock source selection.
+ * @note The SAI peripheral is only available with STM32F427/437/429/439xx Devices.
+ * @note This function must be called before enabling PLLSAI, PLLI2S and
+ * the SAI clock.
+ * @param __SOURCE__: specifies the SAI Block B clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SAIBCLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
+ * as SAI1 Block B clock.
+ * @arg RCC_SAIBCLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
+ * as SAI1 Block B clock.
+ * @arg RCC_SAIBCLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin
+ * used as SAI1 Block B clock.
+ */
+#define __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1BSRC, (__SOURCE__)))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F446xx)
+/** @brief Macro to configure SAI1 clock source selection.
+ * @note This configuration is only available with STM32F446xx Devices.
+ * @note This function must be called before enabling PLL, PLLSAI, PLLI2S and
+ * the SAI clock.
+ * @param __SOURCE__: specifies the SAI1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
+ */
+#define __HAL_RCC_SAI1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1SRC, (__SOURCE__)))
+
+/** @brief Macro to Get SAI1 clock source selection.
+ * @note This configuration is only available with STM32F446xx Devices.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
+ * @arg RCC_SAI1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
+ */
+#define __HAL_RCC_GET_SAI1_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI1SRC))
+
+/** @brief Macro to configure SAI2 clock source selection.
+ * @note This configuration is only available with STM32F446xx Devices.
+ * @note This function must be called before enabling PLL, PLLSAI, PLLI2S and
+ * the SAI clock.
+ * @param __SOURCE__: specifies the SAI2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock used as SAI2 clock.
+ */
+#define __HAL_RCC_SAI2_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI2SRC, (__SOURCE__)))
+
+/** @brief Macro to Get SAI2 clock source selection.
+ * @note This configuration is only available with STM32F446xx Devices.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI2 clock.
+ * @arg RCC_SAI2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock used as SAI2 clock.
+ */
+#define __HAL_RCC_GET_SAI2_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI2SRC))
+
+/** @brief Macro to configure I2S APB1 clock source selection.
+ * @note This configuration is only available with STM32F446xx Devices.
+ * @note This function must be called before enabling PLL, PLLI2S and the I2S clock.
+ * @param __SOURCE__: specifies the I2S APB1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock.
+ * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
+ */
+#define __HAL_RCC_I2S_APB1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC, (__SOURCE__)))
+
+/** @brief Macro to Get I2S APB1 clock source selection.
+ * @note This configuration is only available with STM32F446xx Devices.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock.
+ * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
+ * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
+ */
+#define __HAL_RCC_GET_I2S_APB1_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC))
+
+/** @brief Macro to configure I2S APB2 clock source selection.
+ * @note This configuration is only available with STM32F446xx Devices.
+ * @note This function must be called before enabling PLL, PLLI2S and the I2S clock.
+ * @param __SOURCE__: specifies the SAI Block A clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock.
+ * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
+ */
+#define __HAL_RCC_I2S_APB2_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC, (__SOURCE__)))
+
+/** @brief Macro to Get I2S APB2 clock source selection.
+ * @note This configuration is only available with STM32F446xx Devices.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock.
+ * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock.
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock.
+ * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock.
+ */
+#define __HAL_RCC_GET_I2S_APB2_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC))
+
+/** @brief Macro to configure the CEC clock.
+ * @param __SOURCE__: specifies the CEC clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_CECCLKSOURCE_HSI: HSI selected as CEC clock
+ * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
+ */
+#define __HAL_RCC_CEC_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the CEC clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_CECCLKSOURCE_HSI488: HSI selected as CEC clock
+ * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
+ */
+#define __HAL_RCC_GET_CEC_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL))
+
+/** @brief Macro to configure the FMPI2C1 clock.
+ * @param __SOURCE__: specifies the FMPI2C1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_FMPI2C1CLKSOURCE_APB: APB selected as CEC clock
+ * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as CEC clock
+ * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as CEC clock
+ */
+#define __HAL_RCC_FMPI2C1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the FMPI2C1 clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_FMPI2C1CLKSOURCE_APB: APB selected as CEC clock
+ * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as CEC clock
+ * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as CEC clock
+ */
+#define __HAL_RCC_GET_FMPI2C1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL))
+
+/** @brief Macro to configure the CLK48 clock.
+ * @param __SOURCE__: specifies the CK48 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_CK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CK48 clock.
+ * @arg RCC_CK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CK48 clock.
+ */
+#define __HAL_RCC_CLK48_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the CLK48 clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_CK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CK48 clock.
+ * @arg RCC_CK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CK48 clock.
+ */
+#define __HAL_RCC_GET_CLK48_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL))
+
+/** @brief Macro to configure the SDIO clock.
+ * @param __SOURCE__: specifies the SDIO clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SDIOCLKSOURCE_CK48: CK48 output used as SDIO clock.
+ * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock.
+ */
+#define __HAL_RCC_SDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the SDIO clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_SDIOCLKSOURCE_CK48: CK48 output used as SDIO clock.
+ * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock.
+ */
+#define __HAL_RCC_GET_SDIO_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL))
+
+/** @brief Macro to configure the SPDIFRX clock.
+ * @param __SOURCE__: specifies the SPDIFRX clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SPDIFRXCLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SPDIFRX clock.
+ * @arg RCC_SPDIFRXCLKSOURCE_PLLI2SP: PLLI2S VCO Output divided by PLLI2SP used as SPDIFRX clock.
+ */
+#define __HAL_RCC_SPDIFRX_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SPDIFRXSEL, (uint32_t)(__SOURCE__)))
+
+/** @brief Macro to Get the SPDIFRX clock.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_SPDIFRXCLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SPDIFRX clock.
+ * @arg RCC_SPDIFRXCLKSOURCE_PLLI2SP: PLLI2S VCO Output divided by PLLI2SP used as SPDIFRX clock.
+ */
+#define __HAL_RCC_GET_SPDIFRX_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SPDIFRXSEL))
+#endif /* STM32F446xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
+
+/** @brief Macro to configure the Timers clocks prescalers
+ * @note This feature is only available with STM32F429x/439x Devices.
+ * @param __PRESC__ : specifies the Timers clocks prescalers selection
+ * This parameter can be one of the following values:
+ * @arg RCC_TIMPRES_DESACTIVATED: The Timers kernels clocks prescaler is
+ * equal to HPRE if PPREx is corresponding to division by 1 or 2,
+ * else it is equal to [(HPRE * PPREx) / 2] if PPREx is corresponding to
+ * division by 4 or more.
+ * @arg RCC_TIMPRES_ACTIVATED: The Timers kernels clocks prescaler is
+ * equal to HPRE if PPREx is corresponding to division by 1, 2 or 4,
+ * else it is equal to [(HPRE * PPREx) / 4] if PPREx is corresponding
+ * to division by 8 or more.
+ */
+#define __HAL_RCC_TIMCLKPRESCALER(__PRESC__) (*(__IO uint32_t *) RCC_DCKCFGR_TIMPRE_BB = (__PRESC__))
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx) || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
+
+/*-------------------------------------------------------------------------------------------------------------------*/
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+/** @brief Enable PLLSAI_RDY interrupt.
+ */
+#define __HAL_RCC_PLLSAI_ENABLE_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYIE))
+
+/** @brief Disable PLLSAI_RDY interrupt.
+ */
+#define __HAL_RCC_PLLSAI_DISABLE_IT() (RCC->CIR &= ~(RCC_CIR_PLLSAIRDYIE))
+
+/** @brief Clear the PLLSAI RDY interrupt pending bits.
+ */
+#define __HAL_RCC_PLLSAI_CLEAR_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYF))
+
+/** @brief Check the PLLSAI RDY interrupt has occurred or not.
+ * @retval The new state (TRUE or FALSE).
+ */
+#define __HAL_RCC_PLLSAI_GET_IT() ((RCC->CIR & (RCC_CIR_PLLSAIRDYIE)) == (RCC_CIR_PLLSAIRDYIE))
+
+/** @brief Check PLLSAI RDY flag is set or not.
+ * @retval The new state (TRUE or FALSE).
+ */
+#define __HAL_RCC_PLLSAI_GET_FLAG() ((RCC->CR & (RCC_CR_PLLSAIRDY)) == (RCC_CR_PLLSAIRDY))
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RCCEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RCCEx_Exported_Functions_Group1
+ * @{
+ */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+
+#if defined(STM32F446xx)
+uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk);
+#endif /* STM32F446xx */
+
+#if defined(STM32F411xE) || defined(STM32F446xx)
+void HAL_RCCEx_SelectLSEMode(uint8_t Mode);
+#endif /* STM32F411xE || STM32F446xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RCCEx_Private_Constants RCCEx Private Constants
+ * @{
+ */
+
+/** @defgroup RCCEx_BitAddress_AliasRegion RCC BitAddress AliasRegion
+ * @brief RCC registers bit address in the alias region
+ * @{
+ */
+/* --- CR Register ---*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+/* Alias word address of PLLSAION bit */
+#define RCC_PLLSAION_BIT_NUMBER 0x1C
+#define RCC_CR_PLLSAION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_PLLSAION_BIT_NUMBER * 4))
+
+/* --- DCKCFGR Register ---*/
+/* Alias word address of TIMPRE bit */
+#define RCC_DCKCFGR_OFFSET (RCC_OFFSET + 0x8C)
+#define RCC_TIMPRE_BIT_NUMBER 0x18
+#define RCC_DCKCFGR_TIMPRE_BB (PERIPH_BB_BASE + (RCC_DCKCFGR_OFFSET * 32) + (RCC_TIMPRE_BIT_NUMBER * 4))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+#define PLL_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup RCCEx_Private_Macros RCCEx Private Macros
+ * @{
+ */
+/** @defgroup RCCEx_IS_RCC_Definitions RCC Private macros to check input parameters
+ * @{
+ */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x0000002F))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x00000003))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F446xx)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x000007FF))
+#endif /* STM32F446xx */
+
+#define IS_RCC_PLLI2SN_VALUE(VALUE) ((192 <= (VALUE)) && ((VALUE) <= 432))
+#define IS_RCC_PLLI2SR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7))
+
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F446xx)
+#define IS_RCC_PLLI2SQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15))
+
+#define IS_RCC_PLLSAIN_VALUE(VALUE) ((49 <= (VALUE)) && ((VALUE) <= 432))
+
+#define IS_RCC_PLLSAIQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15))
+
+#define IS_RCC_PLLSAIR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7))
+
+#define IS_RCC_PLLSAI_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32))
+
+#define IS_RCC_PLLI2S_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32))
+
+#define IS_RCC_PLLSAI_DIVR_VALUE(VALUE) (((VALUE) == RCC_PLLSAIDIVR_2) ||\
+ ((VALUE) == RCC_PLLSAIDIVR_4) ||\
+ ((VALUE) == RCC_PLLSAIDIVR_8) ||\
+ ((VALUE) == RCC_PLLSAIDIVR_16))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F446xx) || defined(STM32F411xE)
+#define IS_RCC_PLLI2SM_VALUE(VALUE) ((VALUE) <= 63)
+
+#define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\
+ ((MODE) == RCC_LSE_HIGHDRIVE_MODE))
+#endif /* STM32F446xx || STM32F411xE */
+
+#if defined(STM32F446xx)
+#define IS_RCC_PLLR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7))
+
+#define IS_RCC_PLLI2SP_VALUE(VALUE) (((VALUE) == RCC_PLLI2SP_DIV2) ||\
+ ((VALUE) == RCC_PLLI2SP_DIV4) ||\
+ ((VALUE) == RCC_PLLI2SP_DIV6) ||\
+ ((VALUE) == RCC_PLLI2SP_DIV8))
+
+#define IS_RCC_PLLSAIM_VALUE(VALUE) ((VALUE) <= 63)
+
+#define IS_RCC_PLLSAIP_VALUE(VALUE) (((VALUE) == RCC_PLLSAIP_DIV2) ||\
+ ((VALUE) == RCC_PLLSAIP_DIV4) ||\
+ ((VALUE) == RCC_PLLSAIP_DIV6) ||\
+ ((VALUE) == RCC_PLLSAIP_DIV8))
+
+#define IS_RCC_SAI1CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI1CLKSOURCE_PLLSAI) ||\
+ ((SOURCE) == RCC_SAI1CLKSOURCE_PLLI2S) ||\
+ ((SOURCE) == RCC_SAI1CLKSOURCE_PLLR) ||\
+ ((SOURCE) == RCC_SAI1CLKSOURCE_EXT))
+
+#define IS_RCC_SAI2CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI2CLKSOURCE_PLLSAI) ||\
+ ((SOURCE) == RCC_SAI2CLKSOURCE_PLLI2S) ||\
+ ((SOURCE) == RCC_SAI2CLKSOURCE_PLLR) ||\
+ ((SOURCE) == RCC_SAI2CLKSOURCE_PLLSRC))
+
+#define IS_RCC_I2SAPB1CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLI2S) ||\
+ ((SOURCE) == RCC_I2SAPB1CLKSOURCE_EXT) ||\
+ ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLR) ||\
+ ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLSRC))
+
+ #define IS_RCC_I2SAPB2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLI2S) ||\
+ ((SOURCE) == RCC_I2SAPB2CLKSOURCE_EXT) ||\
+ ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLR) ||\
+ ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLSRC))
+
+#define IS_RCC_FMPI2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_FMPI2C1CLKSOURCE_APB) ||\
+ ((SOURCE) == RCC_FMPI2C1CLKSOURCE_SYSCLK) ||\
+ ((SOURCE) == RCC_FMPI2C1CLKSOURCE_HSI))
+
+#define IS_RCC_CECCLKSOURCE(SOURCE) (((SOURCE) == RCC_CECCLKSOURCE_HSI) ||\
+ ((SOURCE) == RCC_CECCLKSOURCE_LSE))
+
+#define IS_RCC_CK48CLKSOURCE(SOURCE) (((SOURCE) == RCC_CK48CLKSOURCE_PLLQ) ||\
+ ((SOURCE) == RCC_CK48CLKSOURCE_PLLSAIP))
+
+#define IS_RCC_SDIOCLKSOURCE(SOURCE) (((SOURCE) == RCC_SDIOCLKSOURCE_CK48) ||\
+ ((SOURCE) == RCC_SDIOCLKSOURCE_SYSCLK))
+
+#define IS_RCC_SPDIFRXCLKSOURCE(SOURCE) (((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLLR) ||\
+ ((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLLI2SP))
+#endif /* STM32F446xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_RCC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_rng.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,364 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rng.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of RNG HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RNG_H
+#define __STM32F4xx_HAL_RNG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup RNG RNG
+ * @brief RNG HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RNG_Exported_Types RNG Exported Types
+ * @{
+ */
+
+/** @defgroup RNG_Exported_Types_Group1 RNG State Structure definition
+ * @{
+ */
+typedef enum
+{
+ HAL_RNG_STATE_RESET = 0x00, /*!< RNG not yet initialized or disabled */
+ HAL_RNG_STATE_READY = 0x01, /*!< RNG initialized and ready for use */
+ HAL_RNG_STATE_BUSY = 0x02, /*!< RNG internal process is ongoing */
+ HAL_RNG_STATE_TIMEOUT = 0x03, /*!< RNG timeout state */
+ HAL_RNG_STATE_ERROR = 0x04 /*!< RNG error state */
+
+}HAL_RNG_StateTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup RNG_Exported_Types_Group2 RNG Handle Structure definition
+ * @{
+ */
+typedef struct
+{
+ RNG_TypeDef *Instance; /*!< Register base address */
+
+ HAL_LockTypeDef Lock; /*!< RNG locking object */
+
+ __IO HAL_RNG_StateTypeDef State; /*!< RNG communication state */
+
+ uint32_t RandomNumber; /*!< Last Generated RNG Data */
+
+}RNG_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup RNG_Exported_Constants RNG Exported Constants
+ * @{
+ */
+
+/** @defgroup RNG_Exported_Constants_Group1 RNG Interrupt definition
+ * @{
+ */
+#define RNG_IT_DRDY RNG_SR_DRDY /*!< Data Ready interrupt */
+#define RNG_IT_CEI RNG_SR_CEIS /*!< Clock error interrupt */
+#define RNG_IT_SEI RNG_SR_SEIS /*!< Seed error interrupt */
+/**
+ * @}
+ */
+
+/** @defgroup RNG_Exported_Constants_Group2 RNG Flag definition
+ * @{
+ */
+#define RNG_FLAG_DRDY RNG_SR_DRDY /*!< Data ready */
+#define RNG_FLAG_CECS RNG_SR_CECS /*!< Clock error current status */
+#define RNG_FLAG_SECS RNG_SR_SECS /*!< Seed error current status */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup RNG_Exported_Macros RNG Exported Macros
+ * @{
+ */
+
+/** @brief Reset RNG handle state
+ * @param __HANDLE__: RNG Handle
+ * @retval None
+ */
+#define __HAL_RNG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RNG_STATE_RESET)
+
+/**
+ * @brief Enables the RNG peripheral.
+ * @param __HANDLE__: RNG Handle
+ * @retval None
+ */
+#define __HAL_RNG_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_RNGEN)
+
+/**
+ * @brief Disables the RNG peripheral.
+ * @param __HANDLE__: RNG Handle
+ * @retval None
+ */
+#define __HAL_RNG_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_RNGEN)
+
+/**
+ * @brief Check the selected RNG flag status.
+ * @param __HANDLE__: RNG Handle
+ * @param __FLAG__: RNG flag
+ * This parameter can be one of the following values:
+ * @arg RNG_FLAG_DRDY: Data ready
+ * @arg RNG_FLAG_CECS: Clock error current status
+ * @arg RNG_FLAG_SECS: Seed error current status
+ * @retval The new state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_RNG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clears the selected RNG flag status.
+ * @param __HANDLE__: RNG handle
+ * @param __FLAG__: RNG flag to clear
+ * @note WARNING: This is a dummy macro for HAL code alignment,
+ * flags RNG_FLAG_DRDY, RNG_FLAG_CECS and RNG_FLAG_SECS are read-only.
+ * @retval None
+ */
+#define __HAL_RNG_CLEAR_FLAG(__HANDLE__, __FLAG__) /* dummy macro */
+
+
+
+/**
+ * @brief Enables the RNG interrupts.
+ * @param __HANDLE__: RNG Handle
+ * @retval None
+ */
+#define __HAL_RNG_ENABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_IE)
+
+/**
+ * @brief Disables the RNG interrupts.
+ * @param __HANDLE__: RNG Handle
+ * @retval None
+ */
+#define __HAL_RNG_DISABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_IE)
+
+/**
+ * @brief Checks whether the specified RNG interrupt has occurred or not.
+ * @param __HANDLE__: RNG Handle
+ * @param __INTERRUPT__: specifies the RNG interrupt status flag to check.
+ * This parameter can be one of the following values:
+ * @arg RNG_IT_DRDY: Data ready interrupt
+ * @arg RNG_IT_CEI: Clock error interrupt
+ * @arg RNG_IT_SEI: Seed error interrupt
+ * @retval The new state of __INTERRUPT__ (SET or RESET).
+ */
+#define __HAL_RNG_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+ * @brief Clear the RNG interrupt status flags.
+ * @param __HANDLE__: RNG Handle
+ * @param __INTERRUPT__: specifies the RNG interrupt status flag to clear.
+ * This parameter can be one of the following values:
+ * @arg RNG_IT_CEI: Clock error interrupt
+ * @arg RNG_IT_SEI: Seed error interrupt
+ * @note RNG_IT_DRDY flag is read-only, reading RNG_DR register automatically clears RNG_IT_DRDY.
+ * @retval None
+ */
+#define __HAL_RNG_CLEAR_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR) = ~(__INTERRUPT__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup RNG_Exported_Functions RNG Exported Functions
+ * @{
+ */
+
+/** @defgroup RNG_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng);
+HAL_StatusTypeDef HAL_RNG_DeInit (RNG_HandleTypeDef *hrng);
+void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng);
+void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng);
+
+/**
+ * @}
+ */
+
+/** @defgroup RNG_Exported_Functions_Group2 Peripheral Control functions
+ * @{
+ */
+uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef *hrng); /* Obsolete, use HAL_RNG_GenerateRandomNumber() instead */
+uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef *hrng); /* Obsolete, use HAL_RNG_GenerateRandomNumber_IT() instead */
+
+HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random32bit);
+HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber_IT(RNG_HandleTypeDef *hrng);
+uint32_t HAL_RNG_ReadLastRandomNumber(RNG_HandleTypeDef *hrng);
+
+void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng);
+void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng);
+void HAL_RNG_ReadyDataCallback(RNG_HandleTypeDef* hrng, uint32_t random32bit);
+
+/**
+ * @}
+ */
+
+/** @defgroup RNG_Exported_Functions_Group3 Peripheral State functions
+ * @{
+ */
+HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup RNG_Private_Types RNG Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup RNG_Private_Defines RNG Private Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup RNG_Private_Variables RNG Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RNG_Private_Constants RNG Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup RNG_Private_Macros RNG Private Macros
+ * @{
+ */
+#define IS_RNG_IT(IT) (((IT) == RNG_IT_CEI) || \
+ ((IT) == RNG_IT_SEI))
+
+#define IS_RNG_FLAG(FLAG) (((FLAG) == RNG_FLAG_DRDY) || \
+ ((FLAG) == RNG_FLAG_CECS) || \
+ ((FLAG) == RNG_FLAG_SECS))
+
+/**
+ * @}
+ */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup RNG_Private_Functions_Prototypes RNG Private Functions Prototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup RNG_Private_Functions RNG Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_RNG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_rtc.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,823 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rtc.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of RTC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RTC_H
+#define __STM32F4xx_HAL_RTC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RTC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup RTC_Exported_Types RTC Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_RTC_STATE_RESET = 0x00, /*!< RTC not yet initialized or disabled */
+ HAL_RTC_STATE_READY = 0x01, /*!< RTC initialized and ready for use */
+ HAL_RTC_STATE_BUSY = 0x02, /*!< RTC process is ongoing */
+ HAL_RTC_STATE_TIMEOUT = 0x03, /*!< RTC timeout state */
+ HAL_RTC_STATE_ERROR = 0x04 /*!< RTC error state */
+
+}HAL_RTCStateTypeDef;
+
+/**
+ * @brief RTC Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t HourFormat; /*!< Specifies the RTC Hour Format.
+ This parameter can be a value of @ref RTC_Hour_Formats */
+
+ uint32_t AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */
+
+ uint32_t SynchPrediv; /*!< Specifies the RTC Synchronous Predivider value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF */
+
+ uint32_t OutPut; /*!< Specifies which signal will be routed to the RTC output.
+ This parameter can be a value of @ref RTC_Output_selection_Definitions */
+
+ uint32_t OutPutPolarity; /*!< Specifies the polarity of the output signal.
+ This parameter can be a value of @ref RTC_Output_Polarity_Definitions */
+
+ uint32_t OutPutType; /*!< Specifies the RTC Output Pin mode.
+ This parameter can be a value of @ref RTC_Output_Type_ALARM_OUT */
+}RTC_InitTypeDef;
+
+/**
+ * @brief RTC Time structure definition
+ */
+typedef struct
+{
+ uint8_t Hours; /*!< Specifies the RTC Time Hour.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the RTC_HourFormat_12 is selected.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the RTC_HourFormat_24 is selected */
+
+ uint8_t Minutes; /*!< Specifies the RTC Time Minutes.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+ uint8_t Seconds; /*!< Specifies the RTC Time Seconds.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+ uint32_t SubSeconds; /*!< Specifies the RTC Time SubSeconds.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+ uint8_t TimeFormat; /*!< Specifies the RTC AM/PM Time.
+ This parameter can be a value of @ref RTC_AM_PM_Definitions */
+
+ uint32_t DayLightSaving; /*!< Specifies DayLight Save Operation.
+ This parameter can be a value of @ref RTC_DayLightSaving_Definitions */
+
+ uint32_t StoreOperation; /*!< Specifies RTC_StoreOperation value to be written in the BCK bit
+ in CR register to store the operation.
+ This parameter can be a value of @ref RTC_StoreOperation_Definitions */
+}RTC_TimeTypeDef;
+
+/**
+ * @brief RTC Date structure definition
+ */
+typedef struct
+{
+ uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay.
+ This parameter can be a value of @ref RTC_WeekDay_Definitions */
+
+ uint8_t Month; /*!< Specifies the RTC Date Month (in BCD format).
+ This parameter can be a value of @ref RTC_Month_Date_Definitions */
+
+ uint8_t Date; /*!< Specifies the RTC Date.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 31 */
+
+ uint8_t Year; /*!< Specifies the RTC Date Year.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 99 */
+
+}RTC_DateTypeDef;
+
+/**
+ * @brief RTC Alarm structure definition
+ */
+typedef struct
+{
+ RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members */
+
+ uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks.
+ This parameter can be a value of @ref RTC_AlarmMask_Definitions */
+
+ uint32_t AlarmSubSecondMask; /*!< Specifies the RTC Alarm SubSeconds Masks.
+ This parameter can be a value of @ref RTC_Alarm_Sub_Seconds_Masks_Definitions */
+
+ uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on Date or WeekDay.
+ This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */
+
+ uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Date/WeekDay.
+ If the Alarm Date is selected, this parameter must be set to a value in the 1-31 range.
+ If the Alarm WeekDay is selected, this parameter can be a value of @ref RTC_WeekDay_Definitions */
+
+ uint32_t Alarm; /*!< Specifies the alarm .
+ This parameter can be a value of @ref RTC_Alarms_Definitions */
+}RTC_AlarmTypeDef;
+
+/**
+ * @brief RTC Handle Structure definition
+ */
+typedef struct
+{
+ RTC_TypeDef *Instance; /*!< Register base address */
+
+ RTC_InitTypeDef Init; /*!< RTC required parameters */
+
+ HAL_LockTypeDef Lock; /*!< RTC locking object */
+
+ __IO HAL_RTCStateTypeDef State; /*!< Time communication state */
+
+}RTC_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RTC_Exported_Constants RTC Exported Constants
+ * @{
+ */
+
+/** @defgroup RTC_Hour_Formats RTC Hour Formats
+ * @{
+ */
+#define RTC_HOURFORMAT_24 ((uint32_t)0x00000000)
+#define RTC_HOURFORMAT_12 ((uint32_t)0x00000040)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Output_selection_Definitions RTC Output Selection Definitions
+ * @{
+ */
+#define RTC_OUTPUT_DISABLE ((uint32_t)0x00000000)
+#define RTC_OUTPUT_ALARMA ((uint32_t)0x00200000)
+#define RTC_OUTPUT_ALARMB ((uint32_t)0x00400000)
+#define RTC_OUTPUT_WAKEUP ((uint32_t)0x00600000)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Output_Polarity_Definitions RTC Output Polarity Definitions
+ * @{
+ */
+#define RTC_OUTPUT_POLARITY_HIGH ((uint32_t)0x00000000)
+#define RTC_OUTPUT_POLARITY_LOW ((uint32_t)0x00100000)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Output_Type_ALARM_OUT RTC Output Type ALARM OUT
+ * @{
+ */
+#define RTC_OUTPUT_TYPE_OPENDRAIN ((uint32_t)0x00000000)
+#define RTC_OUTPUT_TYPE_PUSHPULL ((uint32_t)0x00040000)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_AM_PM_Definitions RTC AM PM Definitions
+ * @{
+ */
+#define RTC_HOURFORMAT12_AM ((uint8_t)0x00)
+#define RTC_HOURFORMAT12_PM ((uint8_t)0x40)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_DayLightSaving_Definitions RTC DayLight Saving Definitions
+ * @{
+ */
+#define RTC_DAYLIGHTSAVING_SUB1H ((uint32_t)0x00020000)
+#define RTC_DAYLIGHTSAVING_ADD1H ((uint32_t)0x00010000)
+#define RTC_DAYLIGHTSAVING_NONE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_StoreOperation_Definitions RTC Store Operation Definitions
+ * @{
+ */
+#define RTC_STOREOPERATION_RESET ((uint32_t)0x00000000)
+#define RTC_STOREOPERATION_SET ((uint32_t)0x00040000)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Input_parameter_format_definitions RTC Input Parameter Format Definitions
+ * @{
+ */
+#define RTC_FORMAT_BIN ((uint32_t)0x000000000)
+#define RTC_FORMAT_BCD ((uint32_t)0x000000001)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Month_Date_Definitions RTC Month Date Definitions
+ * @{
+ */
+/* Coded in BCD format */
+#define RTC_MONTH_JANUARY ((uint8_t)0x01)
+#define RTC_MONTH_FEBRUARY ((uint8_t)0x02)
+#define RTC_MONTH_MARCH ((uint8_t)0x03)
+#define RTC_MONTH_APRIL ((uint8_t)0x04)
+#define RTC_MONTH_MAY ((uint8_t)0x05)
+#define RTC_MONTH_JUNE ((uint8_t)0x06)
+#define RTC_MONTH_JULY ((uint8_t)0x07)
+#define RTC_MONTH_AUGUST ((uint8_t)0x08)
+#define RTC_MONTH_SEPTEMBER ((uint8_t)0x09)
+#define RTC_MONTH_OCTOBER ((uint8_t)0x10)
+#define RTC_MONTH_NOVEMBER ((uint8_t)0x11)
+#define RTC_MONTH_DECEMBER ((uint8_t)0x12)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_WeekDay_Definitions RTC WeekDay Definitions
+ * @{
+ */
+#define RTC_WEEKDAY_MONDAY ((uint8_t)0x01)
+#define RTC_WEEKDAY_TUESDAY ((uint8_t)0x02)
+#define RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03)
+#define RTC_WEEKDAY_THURSDAY ((uint8_t)0x04)
+#define RTC_WEEKDAY_FRIDAY ((uint8_t)0x05)
+#define RTC_WEEKDAY_SATURDAY ((uint8_t)0x06)
+#define RTC_WEEKDAY_SUNDAY ((uint8_t)0x07)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_AlarmDateWeekDay_Definitions RTC Alarm Date WeekDay Definitions
+ * @{
+ */
+#define RTC_ALARMDATEWEEKDAYSEL_DATE ((uint32_t)0x00000000)
+#define RTC_ALARMDATEWEEKDAYSEL_WEEKDAY ((uint32_t)0x40000000)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_AlarmMask_Definitions RTC Alarm Mask Definitions
+ * @{
+ */
+#define RTC_ALARMMASK_NONE ((uint32_t)0x00000000)
+#define RTC_ALARMMASK_DATEWEEKDAY RTC_ALRMAR_MSK4
+#define RTC_ALARMMASK_HOURS RTC_ALRMAR_MSK3
+#define RTC_ALARMMASK_MINUTES RTC_ALRMAR_MSK2
+#define RTC_ALARMMASK_SECONDS RTC_ALRMAR_MSK1
+#define RTC_ALARMMASK_ALL ((uint32_t)0x80808080)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Alarms_Definitions RTC Alarms Definitions
+ * @{
+ */
+#define RTC_ALARM_A RTC_CR_ALRAE
+#define RTC_ALARM_B RTC_CR_ALRBE
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Alarm_Sub_Seconds_Masks_Definitions RTC Alarm Sub Seconds Masks Definitions
+ * @{
+ */
+#define RTC_ALARMSUBSECONDMASK_ALL ((uint32_t)0x00000000) /*!< All Alarm SS fields are masked.
+ There is no comparison on sub seconds
+ for Alarm */
+#define RTC_ALARMSUBSECONDMASK_SS14_1 ((uint32_t)0x01000000) /*!< SS[14:1] are don't care in Alarm
+ comparison. Only SS[0] is compared. */
+#define RTC_ALARMSUBSECONDMASK_SS14_2 ((uint32_t)0x02000000) /*!< SS[14:2] are don't care in Alarm
+ comparison. Only SS[1:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_3 ((uint32_t)0x03000000) /*!< SS[14:3] are don't care in Alarm
+ comparison. Only SS[2:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_4 ((uint32_t)0x04000000) /*!< SS[14:4] are don't care in Alarm
+ comparison. Only SS[3:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_5 ((uint32_t)0x05000000) /*!< SS[14:5] are don't care in Alarm
+ comparison. Only SS[4:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_6 ((uint32_t)0x06000000) /*!< SS[14:6] are don't care in Alarm
+ comparison. Only SS[5:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_7 ((uint32_t)0x07000000) /*!< SS[14:7] are don't care in Alarm
+ comparison. Only SS[6:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_8 ((uint32_t)0x08000000) /*!< SS[14:8] are don't care in Alarm
+ comparison. Only SS[7:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_9 ((uint32_t)0x09000000) /*!< SS[14:9] are don't care in Alarm
+ comparison. Only SS[8:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_10 ((uint32_t)0x0A000000) /*!< SS[14:10] are don't care in Alarm
+ comparison. Only SS[9:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_11 ((uint32_t)0x0B000000) /*!< SS[14:11] are don't care in Alarm
+ comparison. Only SS[10:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_12 ((uint32_t)0x0C000000) /*!< SS[14:12] are don't care in Alarm
+ comparison.Only SS[11:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_13 ((uint32_t)0x0D000000) /*!< SS[14:13] are don't care in Alarm
+ comparison. Only SS[12:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14 ((uint32_t)0x0E000000) /*!< SS[14] is don't care in Alarm
+ comparison.Only SS[13:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_NONE ((uint32_t)0x0F000000) /*!< SS[14:0] are compared and must match
+ to activate alarm. */
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Interrupts_Definitions RTC Interrupts Definitions
+ * @{
+ */
+#define RTC_IT_TS ((uint32_t)0x00008000)
+#define RTC_IT_WUT ((uint32_t)0x00004000)
+#define RTC_IT_ALRB ((uint32_t)0x00002000)
+#define RTC_IT_ALRA ((uint32_t)0x00001000)
+#define RTC_IT_TAMP ((uint32_t)0x00000004) /* Used only to Enable the Tamper Interrupt */
+#define RTC_IT_TAMP1 ((uint32_t)0x00020000)
+#define RTC_IT_TAMP2 ((uint32_t)0x00040000)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Flags_Definitions RTC Flags Definitions
+ * @{
+ */
+#define RTC_FLAG_RECALPF ((uint32_t)0x00010000)
+#define RTC_FLAG_TAMP2F ((uint32_t)0x00004000)
+#define RTC_FLAG_TAMP1F ((uint32_t)0x00002000)
+#define RTC_FLAG_TSOVF ((uint32_t)0x00001000)
+#define RTC_FLAG_TSF ((uint32_t)0x00000800)
+#define RTC_FLAG_WUTF ((uint32_t)0x00000400)
+#define RTC_FLAG_ALRBF ((uint32_t)0x00000200)
+#define RTC_FLAG_ALRAF ((uint32_t)0x00000100)
+#define RTC_FLAG_INITF ((uint32_t)0x00000040)
+#define RTC_FLAG_RSF ((uint32_t)0x00000020)
+#define RTC_FLAG_INITS ((uint32_t)0x00000010)
+#define RTC_FLAG_SHPF ((uint32_t)0x00000008)
+#define RTC_FLAG_WUTWF ((uint32_t)0x00000004)
+#define RTC_FLAG_ALRBWF ((uint32_t)0x00000002)
+#define RTC_FLAG_ALRAWF ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RTC_Exported_Macros RTC Exported Macros
+ * @{
+ */
+
+/** @brief Reset RTC handle state
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET)
+
+/**
+ * @brief Disable the write protection for RTC registers.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Instance->WPR = 0xCA; \
+ (__HANDLE__)->Instance->WPR = 0x53; \
+ } while(0)
+
+/**
+ * @brief Enable the write protection for RTC registers.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Instance->WPR = 0xFF; \
+ } while(0)
+
+/**
+ * @brief Enable the RTC ALARMA peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRAE))
+
+/**
+ * @brief Disable the RTC ALARMA peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRAE))
+
+/**
+ * @brief Enable the RTC ALARMB peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRBE))
+
+/**
+ * @brief Disable the RTC ALARMB peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRBE))
+
+/**
+ * @brief Enable the RTC Alarm interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @arg RTC_IT_ALRB: Alarm B interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC Alarm interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @arg RTC_IT_ALRB: Alarm B interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified RTC Alarm interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Alarm interrupt to check.
+ * This parameter can be:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @arg RTC_IT_ALRB: Alarm B interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __INTERRUPT__) ((((((__HANDLE__)->Instance->ISR)& ((__INTERRUPT__)>> 4)) & 0x0000FFFF) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC Alarm's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag to check.
+ * This parameter can be:
+ * @arg RTC_FLAG_ALRAF
+ * @arg RTC_FLAG_ALRBF
+ * @arg RTC_FLAG_ALRAWF
+ * @arg RTC_FLAG_ALRBWF
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Alarm's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_ALRAF
+ * @arg RTC_FLAG_ALRBF
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+
+/**
+ * @brief Check whether the specified RTC Alarm interrupt has been enabled or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to check.
+ * This parameter can be:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @arg RTC_IT_ALRB: Alarm B interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/**
+ * @brief Enable interrupt on the RTC Alarm associated Exti line.
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+ * @brief Disable interrupt on the RTC Alarm associated Exti line.
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
+
+/**
+ * @brief Enable event on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+ * @brief Disable event on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
+
+/**
+ * @brief Enable falling edge trigger on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+ * @brief Disable falling edge trigger on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
+
+/**
+ * @brief Enable rising edge trigger on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+ * @brief Disable rising edge trigger on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_ALARM_EVENT))
+
+/**
+ * @brief Enable rising & falling edge trigger on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE();
+
+/**
+ * @brief Disable rising & falling edge trigger on the RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE();
+
+/**
+ * @brief Check whether the RTC Alarm associated Exti line interrupt flag is set or not.
+ * @retval Line Status.
+ */
+#define __HAL_RTC_ALARM_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+ * @brief Clear the RTC Alarm associated Exti line flag.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_ALARM_EVENT)
+
+/**
+ * @brief Generate a Software interrupt on RTC Alarm associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_ALARM_EVENT)
+/**
+ * @}
+ */
+
+/* Include RTC HAL Extension module */
+#include "stm32f4xx_hal_rtc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RTC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group2
+ * @{
+ */
+/* RTC Time and Date functions ************************************************/
+HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group3
+ * @{
+ */
+/* RTC Alarm functions ********************************************************/
+HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm);
+HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format);
+void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group4
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc);
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group5
+ * @{
+ */
+/* Peripheral State functions *************************************************/
+HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RTC_Private_Constants RTC Private Constants
+ * @{
+ */
+/* Masks Definition */
+#define RTC_TR_RESERVED_MASK ((uint32_t)0x007F7F7F)
+#define RTC_DR_RESERVED_MASK ((uint32_t)0x00FFFF3F)
+#define RTC_INIT_MASK ((uint32_t)0xFFFFFFFF)
+#define RTC_RSF_MASK ((uint32_t)0xFFFFFF5F)
+#define RTC_FLAGS_MASK ((uint32_t)(RTC_FLAG_TSOVF | RTC_FLAG_TSF | RTC_FLAG_WUTF | \
+ RTC_FLAG_ALRBF | RTC_FLAG_ALRAF | RTC_FLAG_INITF | \
+ RTC_FLAG_RSF | RTC_FLAG_INITS | RTC_FLAG_WUTWF | \
+ RTC_FLAG_ALRBWF | RTC_FLAG_ALRAWF | RTC_FLAG_TAMP1F | \
+ RTC_FLAG_RECALPF | RTC_FLAG_SHPF))
+
+#define RTC_TIMEOUT_VALUE 1000
+
+#define RTC_EXTI_LINE_ALARM_EVENT ((uint32_t)EXTI_IMR_MR17) /*!< External interrupt line 17 Connected to the RTC Alarm event */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup RTC_Private_Macros RTC Private Macros
+ * @{
+ */
+
+/** @defgroup RTC_IS_RTC_Definitions RTC Private macros to check input parameters
+ * @{
+ */
+#define IS_RTC_HOUR_FORMAT(FORMAT) (((FORMAT) == RTC_HOURFORMAT_12) || \
+ ((FORMAT) == RTC_HOURFORMAT_24))
+#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \
+ ((OUTPUT) == RTC_OUTPUT_ALARMA) || \
+ ((OUTPUT) == RTC_OUTPUT_ALARMB) || \
+ ((OUTPUT) == RTC_OUTPUT_WAKEUP))
+#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OUTPUT_POLARITY_HIGH) || \
+ ((POL) == RTC_OUTPUT_POLARITY_LOW))
+#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OUTPUT_TYPE_OPENDRAIN) || \
+ ((TYPE) == RTC_OUTPUT_TYPE_PUSHPULL))
+#define IS_RTC_HOUR12(HOUR) (((HOUR) > (uint32_t)0) && ((HOUR) <= (uint32_t)12))
+#define IS_RTC_HOUR24(HOUR) ((HOUR) <= (uint32_t)23)
+#define IS_RTC_ASYNCH_PREDIV(PREDIV) ((PREDIV) <= (uint32_t)0x7F)
+#define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= (uint32_t)0x7FFF)
+#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= (uint32_t)59)
+#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= (uint32_t)59)
+
+#define IS_RTC_HOURFORMAT12(PM) (((PM) == RTC_HOURFORMAT12_AM) || ((PM) == RTC_HOURFORMAT12_PM))
+#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DAYLIGHTSAVING_SUB1H) || \
+ ((SAVE) == RTC_DAYLIGHTSAVING_ADD1H) || \
+ ((SAVE) == RTC_DAYLIGHTSAVING_NONE))
+#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_STOREOPERATION_RESET) || \
+ ((OPERATION) == RTC_STOREOPERATION_SET))
+#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_FORMAT_BIN) || ((FORMAT) == RTC_FORMAT_BCD))
+#define IS_RTC_YEAR(YEAR) ((YEAR) <= (uint32_t)99)
+#define IS_RTC_MONTH(MONTH) (((MONTH) >= (uint32_t)1) && ((MONTH) <= (uint32_t)12))
+#define IS_RTC_DATE(DATE) (((DATE) >= (uint32_t)1) && ((DATE) <= (uint32_t)31))
+#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
+#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) >(uint32_t) 0) && ((DATE) <= (uint32_t)31))
+#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
+#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_ALARMDATEWEEKDAYSEL_DATE) || \
+ ((SEL) == RTC_ALARMDATEWEEKDAYSEL_WEEKDAY))
+#define IS_RTC_ALARM_MASK(MASK) (((MASK) & 0x7F7F7F7F) == (uint32_t)RESET)
+#define IS_RTC_ALARM(ALARM) (((ALARM) == RTC_ALARM_A) || ((ALARM) == RTC_ALARM_B))
+#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= (uint32_t)0x00007FFF)
+
+#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK) (((MASK) == RTC_ALARMSUBSECONDMASK_ALL) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_1) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_2) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_3) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_4) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_5) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_6) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_7) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_8) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_9) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_10) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_11) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_12) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_13) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_NONE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup RTC_Private_Functions RTC Private Functions
+ * @{
+ */
+HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef* hrtc);
+uint8_t RTC_ByteToBcd2(uint8_t Value);
+uint8_t RTC_Bcd2ToByte(uint8_t Value);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_RTC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_rtc_ex.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,1015 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rtc_ex.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of RTC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RTC_EX_H
+#define __STM32F4xx_HAL_RTC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RTCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Types RTCEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief RTC Tamper structure definition
+ */
+typedef struct
+{
+ uint32_t Tamper; /*!< Specifies the Tamper Pin.
+ This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */
+
+ uint32_t PinSelection; /*!< Specifies the Tamper Pin.
+ This parameter can be a value of @ref RTCEx_Tamper_Pins_Selection */
+
+ uint32_t Trigger; /*!< Specifies the Tamper Trigger.
+ This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */
+
+ uint32_t Filter; /*!< Specifies the RTC Filter Tamper.
+ This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */
+
+ uint32_t SamplingFrequency; /*!< Specifies the sampling frequency.
+ This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */
+
+ uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration .
+ This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */
+
+ uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp .
+ This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */
+
+ uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection.
+ This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */
+}RTC_TamperTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants
+ * @{
+ */
+
+/** @defgroup RTCEx_Backup_Registers_Definitions RTC Backup Registers Definitions
+ * @{
+ */
+#define RTC_BKP_DR0 ((uint32_t)0x00000000)
+#define RTC_BKP_DR1 ((uint32_t)0x00000001)
+#define RTC_BKP_DR2 ((uint32_t)0x00000002)
+#define RTC_BKP_DR3 ((uint32_t)0x00000003)
+#define RTC_BKP_DR4 ((uint32_t)0x00000004)
+#define RTC_BKP_DR5 ((uint32_t)0x00000005)
+#define RTC_BKP_DR6 ((uint32_t)0x00000006)
+#define RTC_BKP_DR7 ((uint32_t)0x00000007)
+#define RTC_BKP_DR8 ((uint32_t)0x00000008)
+#define RTC_BKP_DR9 ((uint32_t)0x00000009)
+#define RTC_BKP_DR10 ((uint32_t)0x0000000A)
+#define RTC_BKP_DR11 ((uint32_t)0x0000000B)
+#define RTC_BKP_DR12 ((uint32_t)0x0000000C)
+#define RTC_BKP_DR13 ((uint32_t)0x0000000D)
+#define RTC_BKP_DR14 ((uint32_t)0x0000000E)
+#define RTC_BKP_DR15 ((uint32_t)0x0000000F)
+#define RTC_BKP_DR16 ((uint32_t)0x00000010)
+#define RTC_BKP_DR17 ((uint32_t)0x00000011)
+#define RTC_BKP_DR18 ((uint32_t)0x00000012)
+#define RTC_BKP_DR19 ((uint32_t)0x00000013)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTC TimeStamp Edges Definitions
+ * @{
+ */
+#define RTC_TIMESTAMPEDGE_RISING ((uint32_t)0x00000000)
+#define RTC_TIMESTAMPEDGE_FALLING ((uint32_t)0x00000008)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pins_Definitions RTC Tamper Pins Definitions
+ * @{
+ */
+#define RTC_TAMPER_1 RTC_TAFCR_TAMP1E
+#define RTC_TAMPER_2 RTC_TAFCR_TAMP2E
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pins_Selection RTC tamper Pins Selection
+ * @{
+ */
+#define RTC_TAMPERPIN_PC13 ((uint32_t)0x00000000)
+#if defined (STM32F446xx)
+ #define RTC_TAMPERPIN_PA0 ((uint32_t)0x00010000)
+#else
+ #define RTC_TAMPERPIN_PI8 ((uint32_t)0x00010000)
+#endif /* STM32F446xx */
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_TimeStamp_Pin_Selection RTC TimeStamp Pins Selection
+ * @{
+ */
+#define RTC_TIMESTAMPPIN_PC13 ((uint32_t)0x00000000)
+#if defined (STM32F446xx)
+ #define RTC_TIMESTAMPPIN_PA0 ((uint32_t)0x00020000)
+#else
+ #define RTC_TIMESTAMPPIN_PI8 ((uint32_t)0x00020000)
+#endif /* STM32F446xx */
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Trigger_Definitions RTC Tamper Triggers Definitions
+ * @{
+ */
+#define RTC_TAMPERTRIGGER_RISINGEDGE ((uint32_t)0x00000000)
+#define RTC_TAMPERTRIGGER_FALLINGEDGE ((uint32_t)0x00000002)
+#define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE
+#define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Filter_Definitions RTC Tamper Filter Definitions
+ * @{
+ */
+#define RTC_TAMPERFILTER_DISABLE ((uint32_t)0x00000000) /*!< Tamper filter is disabled */
+
+#define RTC_TAMPERFILTER_2SAMPLE ((uint32_t)0x00000800) /*!< Tamper is activated after 2
+ consecutive samples at the active level */
+#define RTC_TAMPERFILTER_4SAMPLE ((uint32_t)0x00001000) /*!< Tamper is activated after 4
+ consecutive samples at the active level */
+#define RTC_TAMPERFILTER_8SAMPLE ((uint32_t)0x00001800) /*!< Tamper is activated after 8
+ consecutive samples at the active level. */
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTC Tamper Sampling Frequencies Definitions
+ * @{
+ */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 ((uint32_t)0x00000000) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 32768 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 ((uint32_t)0x00000100) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 16384 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 ((uint32_t)0x00000200) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 8192 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 ((uint32_t)0x00000300) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 4096 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 ((uint32_t)0x00000400) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 2048 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 ((uint32_t)0x00000500) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 1024 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 ((uint32_t)0x00000600) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 512 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 ((uint32_t)0x00000700) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 256 */
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTC Tamper Pin Precharge Duration Definitions
+ * @{
+ */
+#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK ((uint32_t)0x00000000) /*!< Tamper pins are pre-charged before
+ sampling during 1 RTCCLK cycle */
+#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK ((uint32_t)0x00002000) /*!< Tamper pins are pre-charged before
+ sampling during 2 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK ((uint32_t)0x00004000) /*!< Tamper pins are pre-charged before
+ sampling during 4 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK ((uint32_t)0x00006000) /*!< Tamper pins are pre-charged before
+ sampling during 8 RTCCLK cycles */
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTC Tamper TimeStamp On Tamper Detection Definitions
+ * @{
+ */
+#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE ((uint32_t)RTC_TAFCR_TAMPTS) /*!< TimeStamp on Tamper Detection event saved */
+#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event is not saved */
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTC Tamper Pull Up Definitions
+ * @{
+ */
+#define RTC_TAMPER_PULLUP_ENABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event saved */
+#define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAFCR_TAMPPUDIS) /*!< TimeStamp on Tamper Detection event is not saved */
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Wakeup_Timer_Definitions RTC Wake-up Timer Definitions
+ * @{
+ */
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 ((uint32_t)0x00000000)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 ((uint32_t)0x00000001)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 ((uint32_t)0x00000002)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 ((uint32_t)0x00000003)
+#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS ((uint32_t)0x00000004)
+#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS ((uint32_t)0x00000006)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Digital_Calibration_Definitions RTC Digital Calib Definitions
+ * @{
+ */
+#define RTC_CALIBSIGN_POSITIVE ((uint32_t)0x00000000)
+#define RTC_CALIBSIGN_NEGATIVE ((uint32_t)0x00000080)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Smooth_calib_period_Definitions RTC Smooth Calib Period Definitions
+ * @{
+ */
+#define RTC_SMOOTHCALIB_PERIOD_32SEC ((uint32_t)0x00000000) /*!< If RTCCLK = 32768 Hz, Smooth calibration
+ period is 32s, else 2exp20 RTCCLK seconds */
+#define RTC_SMOOTHCALIB_PERIOD_16SEC ((uint32_t)0x00002000) /*!< If RTCCLK = 32768 Hz, Smooth calibration
+ period is 16s, else 2exp19 RTCCLK seconds */
+#define RTC_SMOOTHCALIB_PERIOD_8SEC ((uint32_t)0x00004000) /*!< If RTCCLK = 32768 Hz, Smooth calibration
+ period is 8s, else 2exp18 RTCCLK seconds */
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTC Smooth Calib Plus Pulses Definitions
+ * @{
+ */
+#define RTC_SMOOTHCALIB_PLUSPULSES_SET ((uint32_t)0x00008000) /*!< The number of RTCCLK pulses added
+ during a X -second window = Y - CALM[8:0]
+ with Y = 512, 256, 128 when X = 32, 16, 8 */
+#define RTC_SMOOTHCALIB_PLUSPULSES_RESET ((uint32_t)0x00000000) /*!< The number of RTCCLK pulses subbstited
+ during a 32-second window = CALM[8:0] */
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Add_1_Second_Parameter_Definitions RTC Add 1 Second Parameter Definitions
+ * @{
+ */
+#define RTC_SHIFTADD1S_RESET ((uint32_t)0x00000000)
+#define RTC_SHIFTADD1S_SET ((uint32_t)0x80000000)
+/**
+ * @}
+ */
+
+
+ /** @defgroup RTCEx_Calib_Output_selection_Definitions RTC Calib Output Selection Definitions
+ * @{
+ */
+#define RTC_CALIBOUTPUT_512HZ ((uint32_t)0x00000000)
+#define RTC_CALIBOUTPUT_1HZ ((uint32_t)0x00080000)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros
+ * @{
+ */
+
+/* ---------------------------------WAKEUPTIMER---------------------------------*/
+/** @defgroup RTCEx_WakeUp_Timer RTC WakeUp Timer
+ * @{
+ */
+
+/**
+ * @brief Enable the RTC WakeUp Timer peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
+
+/**
+ * @brief Disable the RTC Wake-up Timer peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
+
+/**
+ * @brief Enable the RTC WakeUpTimer interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC WakeUpTimer interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt to check.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET)? SET : RESET)
+
+/**
+ * @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Wake Up timer interrupt sources to check.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/**
+ * @brief Get the selected RTC WakeUpTimer's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC WakeUpTimer Flag to check.
+ * This parameter can be:
+ * @arg RTC_FLAG_WUTF
+ * @arg RTC_FLAG_WUTWF
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Wake Up timer's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_WUTF
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+ * @brief Enable interrupt on the RTC Wake-up Timer associated Exti line.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Disable interrupt on the RTC Wake-up Timer associated Exti line.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+ * @brief Enable event on the RTC Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Disable event on the RTC Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+ * @brief Enable falling edge trigger on the RTC Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Disable falling edge trigger on the RTC Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+ * @brief Enable rising edge trigger on the RTC Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Disable rising edge trigger on the RTC Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
+
+/**
+ * @brief Enable rising & falling edge trigger on the RTC Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE();
+
+/**
+ * @brief Disable rising & falling edge trigger on the RTC Wake-up Timer associated Exti line.
+ * This parameter can be:
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE();
+
+/**
+ * @brief Check whether the RTC Wake-up Timer associated Exti line interrupt flag is set or not.
+ * @retval Line Status.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Clear the RTC Wake-up Timer associated Exti line flag.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Generate a Software interrupt on the RTC Wake-up Timer associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @}
+ */
+
+/* ---------------------------------TIMESTAMP---------------------------------*/
+/** @defgroup RTCEx_Timestamp RTC Timestamp
+ * @{
+ */
+
+/**
+ * @brief Enable the RTC TimeStamp peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
+
+/**
+ * @brief Disable the RTC TimeStamp peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
+
+/**
+ * @brief Enable the RTC TimeStamp interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC TimeStamp interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt to check.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET)? SET : RESET)
+
+/**
+ * @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Time Stamp interrupt source to check.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/**
+ * @brief Get the selected RTC TimeStamp's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC TimeStamp flag to check.
+ * This parameter can be:
+ * @arg RTC_FLAG_TSF
+ * @arg RTC_FLAG_TSOVF
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Time Stamp's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TSF
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+ * @}
+ */
+
+/* ---------------------------------TAMPER------------------------------------*/
+/** @defgroup RTCEx_Tamper RTC Tamper
+ * @{
+ */
+
+/**
+ * @brief Enable the RTC Tamper1 input detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP1E))
+
+/**
+ * @brief Disable the RTC Tamper1 input detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP1E))
+
+/**
+ * @brief Enable the RTC Tamper2 input detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP2E))
+
+/**
+ * @brief Disable the RTC Tamper2 input detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP2E))
+
+/**
+ * @brief Check whether the specified RTC Tamper interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Tamper interrupt to check.
+ * This parameter can be:
+ * @arg RTC_IT_TAMP1
+ * @arg RTC_IT_TAMP2
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET)? SET : RESET)
+
+/**
+ * @brief Check whether the specified RTC Tamper interrupt has been enabled or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Tamper interrupt source to check.
+ * This parameter can be:
+ * @arg RTC_IT_TAMP: Tamper interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAFCR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
+
+/**
+ * @brief Get the selected RTC Tamper's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F
+ * @arg RTC_FLAG_TAMP2F
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Tamper's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag to clear.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F
+ * @arg RTC_FLAG_TAMP2F
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+/**
+ * @}
+ */
+
+/* --------------------------TAMPER/TIMESTAMP---------------------------------*/
+/** @defgroup RTCEx_Tamper_Timestamp EXTI RTC Tamper Timestamp EXTI
+ * @{
+ */
+
+/**
+ * @brief Enable interrupt on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+ * @brief Disable interrupt on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+ * @brief Enable event on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+ * @brief Disable event on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+ * @brief Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+ * @brief Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+ * @brief Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+ * @brief Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
+
+/**
+ * @brief Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE();
+
+/**
+ * @brief Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
+ * This parameter can be:
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE();
+
+/**
+ * @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not.
+ * @retval Line Status.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
+
+/**
+ * @brief Clear the RTC Tamper and Timestamp associated Exti line flag.
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+
+/**
+ * @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line
+ * @retval None.
+ */
+#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
+/**
+ * @}
+ */
+
+/* ------------------------------Calibration----------------------------------*/
+/** @defgroup RTCEx_Calibration RTC Calibration
+ * @{
+ */
+
+/**
+ * @brief Enable the Coarse calibration process.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_COARSE_CALIB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_DCE))
+
+/**
+ * @brief Disable the Coarse calibration process.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_COARSE_CALIB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_DCE))
+
+/**
+ * @brief Enable the RTC calibration output.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))
+
+/**
+ * @brief Disable the calibration output.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
+
+/**
+ * @brief Enable the clock reference detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))
+
+/**
+ * @brief Disable the clock reference detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
+
+/**
+ * @brief Get the selected RTC shift operation's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC shift operation Flag is pending or not.
+ * This parameter can be:
+ * @arg RTC_FLAG_SHPF
+ * @retval None
+ */
+#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions
+ * @{
+ */
+
+/** @addtogroup RTCEx_Exported_Functions_Group1
+ * @{
+ */
+/* RTC TimeStamp and Tamper functions *****************************************/
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format);
+
+HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
+HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
+void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);
+
+void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/** @addtogroup RTCEx_Exported_Functions_Group2
+ * @{
+ */
+/* RTC Wake-up functions ******************************************************/
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
+uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/** @addtogroup RTCEx_Exported_Functions_Group3
+ * @{
+ */
+/* Extension Control functions ************************************************/
+void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
+uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
+
+HAL_StatusTypeDef HAL_RTCEx_SetCoarseCalib(RTC_HandleTypeDef *hrtc, uint32_t CalibSign, uint32_t Value);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCoarseCalib(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue);
+HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
+HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/** @addtogroup RTCEx_Exported_Functions_Group4
+ * @{
+ */
+/* Extension RTC features functions *******************************************/
+void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RTCEx_Private_Constants RTCEx Private Constants
+ * @{
+ */
+#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)EXTI_IMR_MR21) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */
+#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)EXTI_IMR_MR22) /*!< External interrupt line 22 Connected to the RTC Wake-up event */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup RTCEx_Private_Macros RTCEx Private Macros
+ * @{
+ */
+
+/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters
+ * @{
+ */
+#define IS_RTC_BKP(BKP) (((BKP) == RTC_BKP_DR0) || \
+ ((BKP) == RTC_BKP_DR1) || \
+ ((BKP) == RTC_BKP_DR2) || \
+ ((BKP) == RTC_BKP_DR3) || \
+ ((BKP) == RTC_BKP_DR4) || \
+ ((BKP) == RTC_BKP_DR5) || \
+ ((BKP) == RTC_BKP_DR6) || \
+ ((BKP) == RTC_BKP_DR7) || \
+ ((BKP) == RTC_BKP_DR8) || \
+ ((BKP) == RTC_BKP_DR9) || \
+ ((BKP) == RTC_BKP_DR10) || \
+ ((BKP) == RTC_BKP_DR11) || \
+ ((BKP) == RTC_BKP_DR12) || \
+ ((BKP) == RTC_BKP_DR13) || \
+ ((BKP) == RTC_BKP_DR14) || \
+ ((BKP) == RTC_BKP_DR15) || \
+ ((BKP) == RTC_BKP_DR16) || \
+ ((BKP) == RTC_BKP_DR17) || \
+ ((BKP) == RTC_BKP_DR18) || \
+ ((BKP) == RTC_BKP_DR19))
+#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \
+ ((EDGE) == RTC_TIMESTAMPEDGE_FALLING))
+#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & (uint32_t)0xFFFFFFF6) == 0x00) && ((TAMPER) != (uint32_t)RESET))
+
+#if defined (STM32F446xx)
+#define IS_RTC_TAMPER_PIN(PIN) (((PIN) == RTC_TAMPERPIN_PC13) || \
+ ((PIN) == RTC_TAMPERPIN_PA0))
+#else
+#define IS_RTC_TAMPER_PIN(PIN) (((PIN) == RTC_TAMPERPIN_PC13) || \
+ ((PIN) == RTC_TAMPERPIN_PI8))
+#endif /* STM32F446xx */
+
+#if defined (STM32F446xx)
+#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_PC13) || \
+ ((PIN) == RTC_TIMESTAMPPIN_PA0))
+#else
+#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_PC13) || \
+ ((PIN) == RTC_TIMESTAMPPIN_PI8))
+#endif /* STM32F446xx */
+#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL))
+#define IS_RTC_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_8SAMPLE))
+#define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256))
+#define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK))
+#define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \
+ ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE))
+#define IS_RTC_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \
+ ((STATE) == RTC_TAMPER_PULLUP_DISABLE))
+#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))
+
+#define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFF)
+#define IS_RTC_CALIB_SIGN(SIGN) (((SIGN) == RTC_CALIBSIGN_POSITIVE) || \
+ ((SIGN) == RTC_CALIBSIGN_NEGATIVE))
+
+#define IS_RTC_CALIB_VALUE(VALUE) ((VALUE) < 0x20)
+
+#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \
+ ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \
+ ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC))
+#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \
+ ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET))
+
+
+#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FF)
+#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \
+ ((SEL) == RTC_SHIFTADD1S_SET))
+#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFF)
+#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \
+ ((OUTPUT) == RTC_CALIBOUTPUT_1HZ))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_RTC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_sai.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,908 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sai.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of SAI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SAI_H
+#define __STM32F4xx_HAL_SAI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+
+/** @addtogroup SAI
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SAI_Exported_Types SAI Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_SAI_STATE_RESET = 0x00, /*!< SAI not yet initialized or disabled */
+ HAL_SAI_STATE_READY = 0x01, /*!< SAI initialized and ready for use */
+ HAL_SAI_STATE_BUSY = 0x02, /*!< SAI internal process is ongoing */
+ HAL_SAI_STATE_BUSY_TX = 0x12, /*!< Data transmission process is ongoing */
+ HAL_SAI_STATE_BUSY_RX = 0x22, /*!< Data reception process is ongoing */
+ HAL_SAI_STATE_TIMEOUT = 0x03, /*!< SAI timeout state */
+ HAL_SAI_STATE_ERROR = 0x04 /*!< SAI error state */
+}HAL_SAI_StateTypeDef;
+
+/**
+ * @brief SAI Callback prototype
+ */
+typedef void (*SAIcallback)(void);
+
+/**
+ * @brief SAI Init Structure definition
+ */
+typedef struct
+{
+ uint32_t AudioMode; /*!< Specifies the SAI Block audio Mode.
+ This parameter can be a value of @ref SAI_Block_Mode */
+
+ uint32_t Synchro; /*!< Specifies SAI Block synchronization
+ This parameter can be a value of @ref SAI_Block_Synchronization */
+
+ uint32_t SynchroExt; /*!< Specifies SAI Block synchronization, this setup is common
+ for BLOCKA and BLOCKB
+ This parameter can be a value of @ref SAI_Block_SyncExt */
+
+ uint32_t OutputDrive; /*!< Specifies when SAI Block outputs are driven.
+ This parameter can be a value of @ref SAI_Block_Output_Drive
+ @note this value has to be set before enabling the audio block
+ but after the audio block configuration. */
+
+ uint32_t NoDivider; /*!< Specifies whether master clock will be divided or not.
+ This parameter can be a value of @ref SAI_Block_NoDivider
+ @note: If bit NODIV in the SAI_xCR1 register is cleared, the frame length
+ should be aligned to a number equal to a power of 2, from 8 to 256.
+ If bit NODIV in the SAI_xCR1 register is set, the frame length can
+ take any of the values without constraint since the input clock of
+ the audio block should be equal to the bit clock.
+ There is no MCLK_x clock which can be output. */
+
+ uint32_t FIFOThreshold; /*!< Specifies SAI Block FIFO threshold.
+ This parameter can be a value of @ref SAI_Block_Fifo_Threshold */
+
+ uint32_t ClockSource; /*!< Specifies the SAI Block x Clock source.
+ This parameter is not used for STM32F446xx devices. */
+
+ uint32_t AudioFrequency; /*!< Specifies the audio frequency sampling.
+ This parameter can be a value of @ref SAI_Audio_Frequency */
+
+ uint32_t Mckdiv; /*!< Specifies the master clock divider, the parameter will be used if for
+ AudioFrequency the user choice
+ This parameter must be a number between Min_Data = 0 and Max_Data = 15 */
+
+ uint32_t MonoStereoMode; /*!< Specifies if the mono or stereo mode is selected.
+ This parameter can be a value of @ref SAI_Mono_Stereo_Mode */
+
+ uint32_t CompandingMode; /*!< Specifies the companding mode type.
+ This parameter can be a value of @ref SAI_Block_Companding_Mode */
+
+ uint32_t TriState; /*!< Specifies the companding mode type.
+ This parameter can be a value of @ref SAI_TRIState_Management */
+
+ /* This part of the structure is automatically filled if your are using the high level intialisation
+ function HAL_SAI_InitProtocol */
+
+ uint32_t Protocol; /*!< Specifies the SAI Block protocol.
+ This parameter can be a value of @ref SAI_Block_Protocol */
+
+ uint32_t DataSize; /*!< Specifies the SAI Block data size.
+ This parameter can be a value of @ref SAI_Block_Data_Size */
+
+ uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
+ This parameter can be a value of @ref SAI_Block_MSB_LSB_transmission */
+
+ uint32_t ClockStrobing; /*!< Specifies the SAI Block clock strobing edge sensitivity.
+ This parameter can be a value of @ref SAI_Block_Clock_Strobing */
+}SAI_InitTypeDef;
+
+/**
+ * @brief SAI Block Frame Init structure definition
+ */
+
+typedef struct
+{
+
+ uint32_t FrameLength; /*!< Specifies the Frame length, the number of SCK clocks for each audio frame.
+ This parameter must be a number between Min_Data = 8 and Max_Data = 256.
+ @note: If master clock MCLK_x pin is declared as an output, the frame length
+ should be aligned to a number equal to power of 2 in order to keep
+ in an audio frame, an integer number of MCLK pulses by bit Clock. */
+
+ uint32_t ActiveFrameLength; /*!< Specifies the Frame synchronization active level length.
+ This Parameter specifies the length in number of bit clock (SCK + 1)
+ of the active level of FS signal in audio frame.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 128 */
+
+ uint32_t FSDefinition; /*!< Specifies the Frame synchronization definition.
+ This parameter can be a value of @ref SAI_Block_FS_Definition */
+
+ uint32_t FSPolarity; /*!< Specifies the Frame synchronization Polarity.
+ This parameter can be a value of @ref SAI_Block_FS_Polarity */
+
+ uint32_t FSOffset; /*!< Specifies the Frame synchronization Offset.
+ This parameter can be a value of @ref SAI_Block_FS_Offset */
+
+}SAI_FrameInitTypeDef;
+
+/**
+ * @brief SAI Block Slot Init Structure definition
+ */
+
+typedef struct
+{
+ uint32_t FirstBitOffset; /*!< Specifies the position of first data transfer bit in the slot.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 24 */
+
+ uint32_t SlotSize; /*!< Specifies the Slot Size.
+ This parameter can be a value of @ref SAI_Block_Slot_Size */
+
+ uint32_t SlotNumber; /*!< Specifies the number of slot in the audio frame.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t SlotActive; /*!< Specifies the slots in audio frame that will be activated.
+ This parameter can be a value of @ref SAI_Block_Slot_Active */
+}SAI_SlotInitTypeDef;
+
+/**
+ * @brief SAI handle Structure definition
+ */
+typedef struct __SAI_HandleTypeDef
+{
+ SAI_Block_TypeDef *Instance; /*!< SAI Blockx registers base address */
+
+ SAI_InitTypeDef Init; /*!< SAI communication parameters */
+
+ SAI_FrameInitTypeDef FrameInit; /*!< SAI Frame configuration parameters */
+
+ SAI_SlotInitTypeDef SlotInit; /*!< SAI Slot configuration parameters */
+
+ uint8_t *pBuffPtr; /*!< Pointer to SAI transfer Buffer */
+
+ uint16_t XferSize; /*!< SAI transfer size */
+
+ uint16_t XferCount; /*!< SAI transfer counter */
+
+ DMA_HandleTypeDef *hdmatx; /*!< SAI Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< SAI Rx DMA handle parameters */
+
+ SAIcallback mutecallback;/*!< SAI mute callback */
+
+ void (*InterruptServiceRoutine)(struct __SAI_HandleTypeDef *hsai); /* function pointer for IRQ handler */
+
+ HAL_LockTypeDef Lock; /*!< SAI locking object */
+
+ __IO HAL_SAI_StateTypeDef State; /*!< SAI communication state */
+
+ __IO uint32_t ErrorCode; /*!< SAI Error code */
+}SAI_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup SAI_Exported_Constants SAI Exported Constants
+ * @{
+ */
+
+/** @defgroup SAI_Error_Code SAI Error Code
+ * @{
+ */
+#define HAL_SAI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_SAI_ERROR_OVR ((uint32_t)0x00000001) /*!< Overrun Error */
+#define HAL_SAI_ERROR_UDR ((uint32_t)0x00000002) /*!< Underrun error */
+#define HAL_SAI_ERROR_AFSDET ((uint32_t)0x00000004) /*!< Anticipated Frame synchronisation detection */
+#define HAL_SAI_ERROR_LFSDET ((uint32_t)0x00000008) /*!< Late Frame synchronisation detection */
+#define HAL_SAI_ERROR_CNREADY ((uint32_t)0x00000010) /*!< codec not ready */
+#define HAL_SAI_ERROR_WCKCFG ((uint32_t)0x00000020) /*!< Wrong clock configuration */
+#define HAL_SAI_ERROR_TIMEOUT ((uint32_t)0x00000040) /*!< Timeout error */
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_SyncExt SAI External synchronisation
+ * @{
+ */
+#define SAI_SYNCEXT_DISABLE ((uint32_t)0x00000000)
+#define SAI_SYNCEXT_IN_ENABLE ((uint32_t)0x00000001)
+#define SAI_SYNCEXT_OUTBLOCKA_ENABLE ((uint32_t)0x00000002)
+#define SAI_SYNCEXT_OUTBLOCKB_ENABLE ((uint32_t)0x00000004)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Protocol SAI Supported protocol
+ * @{
+ */
+#define SAI_I2S_STANDARD ((uint32_t)0x00000000)
+#define SAI_I2S_MSBJUSTIFIED ((uint32_t)0x00000001)
+#define SAI_I2S_LSBJUSTIFIED ((uint32_t)0x00000002)
+#define SAI_PCM_LONG ((uint32_t)0x00000004)
+#define SAI_PCM_SHORT ((uint32_t)0x00000008)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Protocol_DataSize SAI protocol data size
+ * @{
+ */
+#define SAI_PROTOCOL_DATASIZE_16BIT ((uint32_t)0x00000000)
+#define SAI_PROTOCOL_DATASIZE_16BITEXTENDED ((uint32_t)0x00000001)
+#define SAI_PROTOCOL_DATASIZE_24BIT ((uint32_t)0x00000002)
+#define SAI_PROTOCOL_DATASIZE_32BIT ((uint32_t)0x00000004)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Clock_Source SAI Clock Source
+ * @{
+ */
+#define SAI_CLKSOURCE_PLLSAI ((uint32_t)0x00000000)
+#define SAI_CLKSOURCE_PLLI2S ((uint32_t)0x00100000)
+#define SAI_CLKSOURCE_EXT ((uint32_t)0x00200000)
+#define SAI_CLKSOURCE_NA ((uint32_t)0x00400000) /*!< No applicable for STM32F446xx */
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Audio_Frequency SAI Audio Frequency
+ * @{
+ */
+#define SAI_AUDIO_FREQUENCY_192K ((uint32_t)192000)
+#define SAI_AUDIO_FREQUENCY_96K ((uint32_t)96000)
+#define SAI_AUDIO_FREQUENCY_48K ((uint32_t)48000)
+#define SAI_AUDIO_FREQUENCY_44K ((uint32_t)44100)
+#define SAI_AUDIO_FREQUENCY_32K ((uint32_t)32000)
+#define SAI_AUDIO_FREQUENCY_22K ((uint32_t)22050)
+#define SAI_AUDIO_FREQUENCY_16K ((uint32_t)16000)
+#define SAI_AUDIO_FREQUENCY_11K ((uint32_t)11025)
+#define SAI_AUDIO_FREQUENCY_8K ((uint32_t)8000)
+#define SAI_AUDIO_FREQUENCY_MCKDIV ((uint32_t)0)
+
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Mode SAI Block Mode
+ * @{
+ */
+#define SAI_MODEMASTER_TX ((uint32_t)0x00000000)
+#define SAI_MODEMASTER_RX ((uint32_t)SAI_xCR1_MODE_0)
+#define SAI_MODESLAVE_TX ((uint32_t)SAI_xCR1_MODE_1)
+#define SAI_MODESLAVE_RX ((uint32_t)(SAI_xCR1_MODE_1 | SAI_xCR1_MODE_0))
+
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Protocol SAI Block Protocol
+ * @{
+ */
+#define SAI_FREE_PROTOCOL ((uint32_t)0x00000000)
+#define SAI_SPDIF_PROTOCOL ((uint32_t)SAI_xCR1_PRTCFG_0)
+#define SAI_AC97_PROTOCOL ((uint32_t)SAI_xCR1_PRTCFG_1)
+
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Data_Size SAI Block Data Size
+ * @{
+ */
+#define SAI_DATASIZE_8 ((uint32_t)SAI_xCR1_DS_1)
+#define SAI_DATASIZE_10 ((uint32_t)(SAI_xCR1_DS_1 | SAI_xCR1_DS_0))
+#define SAI_DATASIZE_16 ((uint32_t)SAI_xCR1_DS_2)
+#define SAI_DATASIZE_20 ((uint32_t)(SAI_xCR1_DS_2 | SAI_xCR1_DS_0))
+#define SAI_DATASIZE_24 ((uint32_t)(SAI_xCR1_DS_2 | SAI_xCR1_DS_1))
+#define SAI_DATASIZE_32 ((uint32_t)(SAI_xCR1_DS_2 | SAI_xCR1_DS_1 | SAI_xCR1_DS_0))
+
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_MSB_LSB_transmission SAI Block MSB LSB transmission
+ * @{
+ */
+#define SAI_FIRSTBIT_MSB ((uint32_t)0x00000000)
+#define SAI_FIRSTBIT_LSB ((uint32_t)SAI_xCR1_LSBFIRST)
+
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Clock_Strobing SAI Block Clock Strobing
+ * @{
+ */
+#define SAI_CLOCKSTROBING_FALLINGEDGE ((uint32_t)0x00000000)
+#define SAI_CLOCKSTROBING_RISINGEDGE ((uint32_t)SAI_xCR1_CKSTR)
+
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Synchronization SAI Block Synchronization
+ * @{
+ */
+#define SAI_ASYNCHRONOUS ((uint32_t)0x00000000)
+#define SAI_SYNCHRONOUS ((uint32_t)SAI_xCR1_SYNCEN_0)
+#define SAI_SYNCHRONOUS_EXT ((uint32_t)SAI_xCR1_SYNCEN_1)
+
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Output_Drive SAI Block Output Drive
+ * @{
+ */
+#define SAI_OUTPUTDRIVE_DISABLE ((uint32_t)0x00000000)
+#define SAI_OUTPUTDRIVE_ENABLE ((uint32_t)SAI_xCR1_OUTDRIV)
+
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_NoDivider SAI Block NoDivider
+ * @{
+ */
+#define SAI_MASTERDIVIDER_ENABLE ((uint32_t)0x00000000)
+#define SAI_MASTERDIVIDER_DISABLE ((uint32_t)SAI_xCR1_NODIV)
+
+/**
+ * @}
+ */
+
+
+/** @defgroup SAI_Block_FS_Definition SAI Block FS Definition
+ * @{
+ */
+#define SAI_FS_STARTFRAME ((uint32_t)0x00000000)
+#define SAI_FS_CHANNEL_IDENTIFICATION ((uint32_t)SAI_xFRCR_FSDEF)
+
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_FS_Polarity SAI Block FS Polarity
+ * @{
+ */
+#define SAI_FS_ACTIVE_LOW ((uint32_t)0x00000000)
+#define SAI_FS_ACTIVE_HIGH ((uint32_t)SAI_xFRCR_FSPO)
+
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_FS_Offset SAI Block FS Offset
+ * @{
+ */
+#define SAI_FS_FIRSTBIT ((uint32_t)0x00000000)
+#define SAI_FS_BEFOREFIRSTBIT ((uint32_t)SAI_xFRCR_FSOFF)
+
+/**
+ * @}
+ */
+
+
+ /** @defgroup SAI_Block_Slot_Size SAI Block Slot Size
+ * @{
+ */
+#define SAI_SLOTSIZE_DATASIZE ((uint32_t)0x00000000)
+#define SAI_SLOTSIZE_16B ((uint32_t)SAI_xSLOTR_SLOTSZ_0)
+#define SAI_SLOTSIZE_32B ((uint32_t)SAI_xSLOTR_SLOTSZ_1)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Slot_Active SAI Block Slot Active
+ * @{
+ */
+#define SAI_SLOT_NOTACTIVE ((uint32_t)0x00000000)
+#define SAI_SLOTACTIVE_0 ((uint32_t)0x00010000)
+#define SAI_SLOTACTIVE_1 ((uint32_t)0x00020000)
+#define SAI_SLOTACTIVE_2 ((uint32_t)0x00040000)
+#define SAI_SLOTACTIVE_3 ((uint32_t)0x00080000)
+#define SAI_SLOTACTIVE_4 ((uint32_t)0x00100000)
+#define SAI_SLOTACTIVE_5 ((uint32_t)0x00200000)
+#define SAI_SLOTACTIVE_6 ((uint32_t)0x00400000)
+#define SAI_SLOTACTIVE_7 ((uint32_t)0x00800000)
+#define SAI_SLOTACTIVE_8 ((uint32_t)0x01000000)
+#define SAI_SLOTACTIVE_9 ((uint32_t)0x02000000)
+#define SAI_SLOTACTIVE_10 ((uint32_t)0x04000000)
+#define SAI_SLOTACTIVE_11 ((uint32_t)0x08000000)
+#define SAI_SLOTACTIVE_12 ((uint32_t)0x10000000)
+#define SAI_SLOTACTIVE_13 ((uint32_t)0x20000000)
+#define SAI_SLOTACTIVE_14 ((uint32_t)0x40000000)
+#define SAI_SLOTACTIVE_15 ((uint32_t)0x80000000)
+#define SAI_SLOTACTIVE_ALL ((uint32_t)0xFFFF0000)
+
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Mono_Stereo_Mode SAI Mono Stereo Mode
+ * @{
+ */
+#define SAI_STEREOMODE ((uint32_t)0x00000000)
+#define SAI_MONOMODE ((uint32_t)SAI_xCR1_MONO)
+
+/**
+ * @}
+ */
+
+/** @defgroup SAI_TRIState_Management SAI TRIState Management
+ * @{
+ */
+#define SAI_OUTPUT_NOTRELEASED ((uint32_t)0x00000000)
+#define SAI_OUTPUT_RELEASED ((uint32_t)SAI_xCR2_TRIS)
+
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Fifo_Threshold SAI Block Fifo Threshold
+ * @{
+ */
+#define SAI_FIFOTHRESHOLD_EMPTY ((uint32_t)0x00000000)
+#define SAI_FIFOTHRESHOLD_1QF ((uint32_t)SAI_xCR2_FTH_0)
+#define SAI_FIFOTHRESHOLD_HF ((uint32_t)SAI_xCR2_FTH_1)
+#define SAI_FIFOTHRESHOLD_3QF ((uint32_t)(SAI_xCR2_FTH_1 | SAI_xCR2_FTH_0))
+#define SAI_FIFOTHRESHOLD_FULL ((uint32_t)SAI_xCR2_FTH_2)
+
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Companding_Mode SAI Block Companding Mode
+ * @{
+ */
+#define SAI_NOCOMPANDING ((uint32_t)0x00000000)
+#define SAI_ULAW_1CPL_COMPANDING ((uint32_t)SAI_xCR2_COMP_1)
+#define SAI_ALAW_1CPL_COMPANDING ((uint32_t)(SAI_xCR2_COMP_1 | SAI_xCR2_COMP_0))
+#define SAI_ULAW_2CPL_COMPANDING ((uint32_t)(SAI_xCR2_COMP_1 | SAI_xCR2_CPL))
+#define SAI_ALAW_2CPL_COMPANDING ((uint32_t)(SAI_xCR2_COMP_1 | SAI_xCR2_COMP_0 | SAI_xCR2_CPL))
+
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Mute_Value SAI Block Mute Value
+ * @{
+ */
+#define SAI_ZERO_VALUE ((uint32_t)0x00000000)
+#define SAI_LAST_SENT_VALUE ((uint32_t)SAI_xCR2_MUTEVAL)
+
+/**
+ * @}
+ */
+
+
+/** @defgroup SAI_Block_Interrupts_Definition SAI Block Interrupts Definition
+ * @{
+ */
+#define SAI_IT_OVRUDR ((uint32_t)SAI_xIMR_OVRUDRIE)
+#define SAI_IT_MUTEDET ((uint32_t)SAI_xIMR_MUTEDETIE)
+#define SAI_IT_WCKCFG ((uint32_t)SAI_xIMR_WCKCFGIE)
+#define SAI_IT_FREQ ((uint32_t)SAI_xIMR_FREQIE)
+#define SAI_IT_CNRDY ((uint32_t)SAI_xIMR_CNRDYIE)
+#define SAI_IT_AFSDET ((uint32_t)SAI_xIMR_AFSDETIE)
+#define SAI_IT_LFSDET ((uint32_t)SAI_xIMR_LFSDETIE)
+
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Flags_Definition SAI Block Flags Definition
+ * @{
+ */
+#define SAI_FLAG_OVRUDR ((uint32_t)SAI_xSR_OVRUDR)
+#define SAI_FLAG_MUTEDET ((uint32_t)SAI_xSR_MUTEDET)
+#define SAI_FLAG_WCKCFG ((uint32_t)SAI_xSR_WCKCFG)
+#define SAI_FLAG_FREQ ((uint32_t)SAI_xSR_FREQ)
+#define SAI_FLAG_CNRDY ((uint32_t)SAI_xSR_CNRDY)
+#define SAI_FLAG_AFSDET ((uint32_t)SAI_xSR_AFSDET)
+#define SAI_FLAG_LFSDET ((uint32_t)SAI_xSR_LFSDET)
+
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Fifo_Status_Level SAI Block Fifo Status Level
+ * @{
+ */
+#define SAI_FIFOSTATUS_EMPTY ((uint32_t)0x00000000)
+#define SAI_FIFOSTATUS_LESS1QUARTERFULL ((uint32_t)0x00010000)
+#define SAI_FIFOSTATUS_1QUARTERFULL ((uint32_t)0x00020000)
+#define SAI_FIFOSTATUS_HALFFULL ((uint32_t)0x00030000)
+#define SAI_FIFOSTATUS_3QUARTERFULL ((uint32_t)0x00040000)
+#define SAI_FIFOSTATUS_FULL ((uint32_t)0x00050000)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup SAI_Exported_Macros SAI Exported Macros
+ * @brief macros to handle interrupts and specific configurations
+ * @{
+ */
+
+/** @brief Reset SAI handle state
+ * @param __HANDLE__: specifies the SAI Handle.
+ * @retval None
+ */
+#define __HAL_SAI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SAI_STATE_RESET)
+
+/** @brief Enable or disable the specified SAI interrupts.
+ * @param __HANDLE__: specifies the SAI Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg SAI_IT_OVRUDR: Overrun underrun interrupt enable
+ * @arg SAI_IT_MUTEDET: Mute detection interrupt enable
+ * @arg SAI_IT_WCKCFG: Wrong Clock Configuration interrupt enable
+ * @arg SAI_IT_FREQ: FIFO request interrupt enable
+ * @arg SAI_IT_CNRDY: Codec not ready interrupt enable
+ * @arg SAI_IT_AFSDET: Anticipated frame synchronization detection interrupt enable
+ * @arg SAI_IT_LFSDET: Late frame synchronization detection interrupt enabl
+ * @retval None
+ */
+
+#define __HAL_SAI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR |= (__INTERRUPT__))
+#define __HAL_SAI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR &= (~(__INTERRUPT__)))
+
+/** @brief Check if the specified SAI interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the SAI Handle.
+ * This parameter can be SAI where x: 1, 2, or 3 to select the SAI peripheral.
+ * @param __INTERRUPT__: specifies the SAI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SAI_IT_TXE: Tx buffer empty interrupt enable.
+ * @arg SAI_IT_RXNE: Rx buffer not empty interrupt enable.
+ * @arg SAI_IT_ERR: Error interrupt enable.
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_SAI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IMR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Check whether the specified SAI flag is set or not.
+ * @param __HANDLE__: specifies the SAI Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SAI_FLAG_OVRUDR: Overrun underrun flag.
+ * @arg SAI_FLAG_MUTEDET: Mute detection flag.
+ * @arg SAI_FLAG_WCKCFG: Wrong Clock Configuration flag.
+ * @arg SAI_FLAG_FREQ: FIFO request flag.
+ * @arg SAI_FLAG_CNRDY: Codec not ready flag.
+ * @arg SAI_FLAG_AFSDET: Anticipated frame synchronization detection flag.
+ * @arg SAI_FLAG_LFSDET: Late frame synchronization detection flag.
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SAI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified SAI pending flag.
+ * @param __HANDLE__: specifies the SAI Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg SAI_FLAG_OVRUDR: Clear Overrun underrun
+ * @arg SAI_FLAG_MUTEDET: Clear Mute detection
+ * @arg SAI_FLAG_WCKCFG: Clear Wrong Clock Configuration
+ * @arg SAI_FLAG_FREQ: Clear FIFO request
+ * @arg SAI_FLAG_CNRDY: Clear Codec not ready
+ * @arg SAI_FLAG_AFSDET: Clear Anticipated frame synchronization detection
+ * @arg SAI_FLAG_LFSDET: Clear Late frame synchronization detection
+ *
+ * @retval None
+ */
+#define __HAL_SAI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CLRFR = (__FLAG__))
+
+#define __HAL_SAI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SAI_xCR1_SAIEN)
+#define __HAL_SAI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~SAI_xCR1_SAIEN)
+
+ /**
+ * @}
+ */
+
+/* Include RCC SAI Extension module */
+#include "stm32f4xx_hal_sai_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup SAI_Exported_Functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions **********************************/
+/** @addtogroup SAI_Exported_Functions_Group1
+ * @{
+ */
+HAL_StatusTypeDef HAL_SAI_InitProtocol(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot);
+HAL_StatusTypeDef HAL_SAI_Init(SAI_HandleTypeDef *hsai);
+HAL_StatusTypeDef HAL_SAI_DeInit (SAI_HandleTypeDef *hsai);
+void HAL_SAI_MspInit(SAI_HandleTypeDef *hsai);
+void HAL_SAI_MspDeInit(SAI_HandleTypeDef *hsai);
+
+/**
+ * @}
+ */
+
+/* I/O operation functions *****************************************************/
+/** @addtogroup SAI_Exported_Functions_Group2
+ * @{
+ */
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_SAI_Transmit(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SAI_Receive(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_SAI_Transmit_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SAI_Receive_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_SAI_Transmit_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SAI_Receive_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SAI_DMAPause(SAI_HandleTypeDef *hsai);
+HAL_StatusTypeDef HAL_SAI_DMAResume(SAI_HandleTypeDef *hsai);
+HAL_StatusTypeDef HAL_SAI_DMAStop(SAI_HandleTypeDef *hsai);
+
+/* Abort function */
+HAL_StatusTypeDef HAL_SAI_Abort(SAI_HandleTypeDef *hsai);
+
+/* Mute management */
+HAL_StatusTypeDef HAL_SAI_EnableTxMuteMode(SAI_HandleTypeDef *hsai, uint16_t val);
+HAL_StatusTypeDef HAL_SAI_DisableTxMuteMode(SAI_HandleTypeDef *hsai);
+HAL_StatusTypeDef HAL_SAI_EnableRxMuteMode(SAI_HandleTypeDef *hsai, SAIcallback callback, uint16_t counter);
+HAL_StatusTypeDef HAL_SAI_DisableRxMuteMode(SAI_HandleTypeDef *hsai);
+
+/* SAI IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_SAI_IRQHandler(SAI_HandleTypeDef *hsai);
+void HAL_SAI_TxHalfCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_TxCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_RxHalfCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_RxCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_ErrorCallback(SAI_HandleTypeDef *hsai);
+/**
+ * @}
+ */
+
+/** @addtogroup SAI_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+HAL_SAI_StateTypeDef HAL_SAI_GetState(SAI_HandleTypeDef *hsai);
+uint32_t HAL_SAI_GetError(SAI_HandleTypeDef *hsai);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup SAI_Private_Types SAI Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup SAI_Private_Variables SAI Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup SAI_Private_Constants SAI Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup SAI_Private_Macros
+ * @{
+ */
+#define IS_SAI_BLOCK_SYNCEXT(STATE) (((STATE) == SAI_SYNCEXT_DISABLE) ||\
+ ((STATE) == SAI_SYNCEXT_IN_ENABLE) ||\
+ ((STATE) == SAI_SYNCEXT_OUTBLOCKA_ENABLE) ||\
+ ((STATE) == SAI_SYNCEXT_OUTBLOCKB_ENABLE))
+
+#define IS_SAI_SUPPORTED_PROTOCOL(PROTOCOL) (((PROTOCOL) == SAI_I2S_STANDARD) ||\
+ ((PROTOCOL) == SAI_I2S_MSBJUSTIFIED) ||\
+ ((PROTOCOL) == SAI_I2S_LSBJUSTIFIED) ||\
+ ((PROTOCOL) == SAI_PCM_LONG) ||\
+ ((PROTOCOL) == SAI_PCM_SHORT))
+
+#define IS_SAI_PROTOCOL_DATASIZE(DATASIZE) (((DATASIZE) == SAI_PROTOCOL_DATASIZE_16BIT) ||\
+ ((DATASIZE) == SAI_PROTOCOL_DATASIZE_16BITEXTENDED) ||\
+ ((DATASIZE) == SAI_PROTOCOL_DATASIZE_24BIT) ||\
+ ((DATASIZE) == SAI_PROTOCOL_DATASIZE_32BIT))
+
+#define IS_SAI_CLK_SOURCE(SOURCE) (((SOURCE) == SAI_CLKSOURCE_PLLSAI) ||\
+ ((SOURCE) == SAI_CLKSOURCE_PLLI2S) ||\
+ ((SOURCE) == SAI_CLKSOURCE_EXT))
+
+#define IS_SAI_AUDIO_FREQUENCY(AUDIO) (((AUDIO) == SAI_AUDIO_FREQUENCY_192K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_96K) || \
+ ((AUDIO) == SAI_AUDIO_FREQUENCY_48K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_44K) || \
+ ((AUDIO) == SAI_AUDIO_FREQUENCY_32K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_22K) || \
+ ((AUDIO) == SAI_AUDIO_FREQUENCY_16K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_11K) || \
+ ((AUDIO) == SAI_AUDIO_FREQUENCY_8K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_MCKDIV))
+
+#define IS_SAI_BLOCK_MODE(MODE) (((MODE) == SAI_MODEMASTER_TX) || \
+ ((MODE) == SAI_MODEMASTER_RX) || \
+ ((MODE) == SAI_MODESLAVE_TX) || \
+ ((MODE) == SAI_MODESLAVE_RX))
+
+#define IS_SAI_BLOCK_PROTOCOL(PROTOCOL) (((PROTOCOL) == SAI_FREE_PROTOCOL) || \
+ ((PROTOCOL) == SAI_AC97_PROTOCOL) || \
+ ((PROTOCOL) == SAI_SPDIF_PROTOCOL))
+
+#define IS_SAI_BLOCK_DATASIZE(DATASIZE) (((DATASIZE) == SAI_DATASIZE_8) || \
+ ((DATASIZE) == SAI_DATASIZE_10) || \
+ ((DATASIZE) == SAI_DATASIZE_16) || \
+ ((DATASIZE) == SAI_DATASIZE_20) || \
+ ((DATASIZE) == SAI_DATASIZE_24) || \
+ ((DATASIZE) == SAI_DATASIZE_32))
+
+#define IS_SAI_BLOCK_FIRST_BIT(BIT) (((BIT) == SAI_FIRSTBIT_MSB) || \
+ ((BIT) == SAI_FIRSTBIT_LSB))
+
+#define IS_SAI_BLOCK_CLOCK_STROBING(CLOCK) (((CLOCK) == SAI_CLOCKSTROBING_FALLINGEDGE) || \
+ ((CLOCK) == SAI_CLOCKSTROBING_RISINGEDGE))
+
+#define IS_SAI_BLOCK_SYNCHRO(SYNCHRO) (((SYNCHRO) == SAI_ASYNCHRONOUS) || \
+ ((SYNCHRO) == SAI_SYNCHRONOUS) || \
+ ((SYNCHRO) == SAI_SYNCHRONOUS_EXT))
+
+#define IS_SAI_BLOCK_OUTPUT_DRIVE(DRIVE) (((DRIVE) == SAI_OUTPUTDRIVE_DISABLE) || \
+ ((DRIVE) == SAI_OUTPUTDRIVE_ENABLE))
+
+#define IS_SAI_BLOCK_NODIVIDER(NODIVIDER) (((NODIVIDER) == SAI_MASTERDIVIDER_ENABLE) || \
+ ((NODIVIDER) == SAI_MASTERDIVIDER_DISABLE))
+
+#define IS_SAI_BLOCK_FIFO_STATUS(STATUS) (((STATUS) == SAI_FIFOSTATUS_LESS1QUARTERFULL ) || \
+ ((STATUS) == SAI_FIFOSTATUS_HALFFULL) || \
+ ((STATUS) == SAI_FIFOSTATUS_1QUARTERFULL) || \
+ ((STATUS) == SAI_FIFOSTATUS_3QUARTERFULL) || \
+ ((STATUS) == SAI_FIFOSTATUS_FULL) || \
+ ((STATUS) == SAI_FIFOSTATUS_EMPTY))
+
+#define IS_SAI_BLOCK_MUTE_COUNTER(COUNTER) ((COUNTER) <= 63)
+
+#define IS_SAI_BLOCK_MUTE_VALUE(VALUE) (((VALUE) == SAI_ZERO_VALUE) || \
+ ((VALUE) == SAI_LAST_SENT_VALUE))
+
+#define IS_SAI_BLOCK_COMPANDING_MODE(MODE) (((MODE) == SAI_NOCOMPANDING) || \
+ ((MODE) == SAI_ULAW_1CPL_COMPANDING) || \
+ ((MODE) == SAI_ALAW_1CPL_COMPANDING) || \
+ ((MODE) == SAI_ULAW_2CPL_COMPANDING) || \
+ ((MODE) == SAI_ALAW_2CPL_COMPANDING))
+
+#define IS_SAI_BLOCK_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == SAI_FIFOTHRESHOLD_EMPTY) || \
+ ((THRESHOLD) == SAI_FIFOTHRESHOLD_1QF) || \
+ ((THRESHOLD) == SAI_FIFOTHRESHOLD_HF) || \
+ ((THRESHOLD) == SAI_FIFOTHRESHOLD_3QF) || \
+ ((THRESHOLD) == SAI_FIFOTHRESHOLD_FULL))
+
+#define IS_SAI_BLOCK_TRISTATE_MANAGEMENT(STATE) (((STATE) == SAI_OUTPUT_NOTRELEASED) ||\
+ ((STATE) == SAI_OUTPUT_RELEASED))
+
+#define IS_SAI_MONO_STEREO_MODE(MODE) (((MODE) == SAI_MONOMODE) ||\
+ ((MODE) == SAI_STEREOMODE))
+
+#define IS_SAI_SLOT_ACTIVE(ACTIVE) ((((ACTIVE) >> 16 ) > 0) && (((ACTIVE) >> 16 ) <= (SAI_SLOTACTIVE_ALL >> 16)))
+
+#define IS_SAI_BLOCK_SLOT_NUMBER(NUMBER) ((1 <= (NUMBER)) && ((NUMBER) <= 16))
+
+#define IS_SAI_BLOCK_SLOT_SIZE(SIZE) (((SIZE) == SAI_SLOTSIZE_DATASIZE) || \
+ ((SIZE) == SAI_SLOTSIZE_16B) || \
+ ((SIZE) == SAI_SLOTSIZE_32B))
+
+#define IS_SAI_BLOCK_FIRSTBIT_OFFSET(OFFSET) ((OFFSET) <= 24)
+
+#define IS_SAI_BLOCK_FS_OFFSET(OFFSET) (((OFFSET) == SAI_FS_FIRSTBIT) || \
+ ((OFFSET) == SAI_FS_BEFOREFIRSTBIT))
+
+#define IS_SAI_BLOCK_FS_POLARITY(POLARITY) (((POLARITY) == SAI_FS_ACTIVE_LOW) || \
+ ((POLARITY) == SAI_FS_ACTIVE_HIGH))
+
+#define IS_SAI_BLOCK_FS_DEFINITION(DEFINITION) (((DEFINITION) == SAI_FS_STARTFRAME) || \
+ ((DEFINITION) == SAI_FS_CHANNEL_IDENTIFICATION))
+
+#define IS_SAI_BLOCK_MASTER_DIVIDER(DIVIDER) ((DIVIDER) <= 15)
+
+#define IS_SAI_BLOCK_FRAME_LENGTH(LENGTH) ((8 <= (LENGTH)) && ((LENGTH) <= 256))
+
+#define IS_SAI_BLOCK_ACTIVE_FRAME(LENGTH) ((1 <= (LENGTH)) && ((LENGTH) <= 128))
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SAI_Private_Functions SAI Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SAI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_sai_ex.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,101 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sai_ex.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of SAI Extension HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SAI_EX_H
+#define __STM32F4xx_HAL_SAI_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SAIEx
+ * @{
+ */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SAIEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup SAIEx_Exported_Functions_Group1
+ * @{
+ */
+
+/* Extended features functions ************************************************/
+void SAI_BlockSynchroConfig(SAI_HandleTypeDef *hsai);
+uint32_t SAI_GetInputClock(SAI_HandleTypeDef *hsai);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SAI_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_sd.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,789 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sd.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of SD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SD_H
+#define __STM32F4xx_HAL_SD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_sdmmc.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup SD SD
+ * @brief SD HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SD_Exported_Types SD Exported Types
+ * @{
+ */
+
+/** @defgroup SD_Exported_Types_Group1 SD Handle Structure definition
+ * @{
+ */
+#define SD_InitTypeDef SDIO_InitTypeDef
+#define SD_TypeDef SDIO_TypeDef
+
+typedef struct
+{
+ SD_TypeDef *Instance; /*!< SDIO register base address */
+
+ SD_InitTypeDef Init; /*!< SD required parameters */
+
+ HAL_LockTypeDef Lock; /*!< SD locking object */
+
+ uint32_t CardType; /*!< SD card type */
+
+ uint32_t RCA; /*!< SD relative card address */
+
+ uint32_t CSD[4]; /*!< SD card specific data table */
+
+ uint32_t CID[4]; /*!< SD card identification number table */
+
+ __IO uint32_t SdTransferCplt; /*!< SD transfer complete flag in non blocking mode */
+
+ __IO uint32_t SdTransferErr; /*!< SD transfer error flag in non blocking mode */
+
+ __IO uint32_t DmaTransferCplt; /*!< SD DMA transfer complete flag */
+
+ __IO uint32_t SdOperation; /*!< SD transfer operation (read/write) */
+
+ DMA_HandleTypeDef *hdmarx; /*!< SD Rx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmatx; /*!< SD Tx DMA handle parameters */
+
+}SD_HandleTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group2 Card Specific Data: CSD Register
+ * @{
+ */
+typedef struct
+{
+ __IO uint8_t CSDStruct; /*!< CSD structure */
+ __IO uint8_t SysSpecVersion; /*!< System specification version */
+ __IO uint8_t Reserved1; /*!< Reserved */
+ __IO uint8_t TAAC; /*!< Data read access time 1 */
+ __IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */
+ __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */
+ __IO uint16_t CardComdClasses; /*!< Card command classes */
+ __IO uint8_t RdBlockLen; /*!< Max. read data block length */
+ __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */
+ __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */
+ __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */
+ __IO uint8_t DSRImpl; /*!< DSR implemented */
+ __IO uint8_t Reserved2; /*!< Reserved */
+ __IO uint32_t DeviceSize; /*!< Device Size */
+ __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */
+ __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */
+ __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */
+ __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */
+ __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */
+ __IO uint8_t EraseGrSize; /*!< Erase group size */
+ __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */
+ __IO uint8_t WrProtectGrSize; /*!< Write protect group size */
+ __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */
+ __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */
+ __IO uint8_t WrSpeedFact; /*!< Write speed factor */
+ __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */
+ __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */
+ __IO uint8_t Reserved3; /*!< Reserved */
+ __IO uint8_t ContentProtectAppli; /*!< Content protection application */
+ __IO uint8_t FileFormatGrouop; /*!< File format group */
+ __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */
+ __IO uint8_t PermWrProtect; /*!< Permanent write protection */
+ __IO uint8_t TempWrProtect; /*!< Temporary write protection */
+ __IO uint8_t FileFormat; /*!< File format */
+ __IO uint8_t ECC; /*!< ECC code */
+ __IO uint8_t CSD_CRC; /*!< CSD CRC */
+ __IO uint8_t Reserved4; /*!< Always 1 */
+
+}HAL_SD_CSDTypedef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group3 Card Identification Data: CID Register
+ * @{
+ */
+typedef struct
+{
+ __IO uint8_t ManufacturerID; /*!< Manufacturer ID */
+ __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */
+ __IO uint32_t ProdName1; /*!< Product Name part1 */
+ __IO uint8_t ProdName2; /*!< Product Name part2 */
+ __IO uint8_t ProdRev; /*!< Product Revision */
+ __IO uint32_t ProdSN; /*!< Product Serial Number */
+ __IO uint8_t Reserved1; /*!< Reserved1 */
+ __IO uint16_t ManufactDate; /*!< Manufacturing Date */
+ __IO uint8_t CID_CRC; /*!< CID CRC */
+ __IO uint8_t Reserved2; /*!< Always 1 */
+
+}HAL_SD_CIDTypedef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group4 SD Card Status returned by ACMD13
+ * @{
+ */
+typedef struct
+{
+ __IO uint8_t DAT_BUS_WIDTH; /*!< Shows the currently defined data bus width */
+ __IO uint8_t SECURED_MODE; /*!< Card is in secured mode of operation */
+ __IO uint16_t SD_CARD_TYPE; /*!< Carries information about card type */
+ __IO uint32_t SIZE_OF_PROTECTED_AREA; /*!< Carries information about the capacity of protected area */
+ __IO uint8_t SPEED_CLASS; /*!< Carries information about the speed class of the card */
+ __IO uint8_t PERFORMANCE_MOVE; /*!< Carries information about the card's performance move */
+ __IO uint8_t AU_SIZE; /*!< Carries information about the card's allocation unit size */
+ __IO uint16_t ERASE_SIZE; /*!< Determines the number of AUs to be erased in one operation */
+ __IO uint8_t ERASE_TIMEOUT; /*!< Determines the timeout for any number of AU erase */
+ __IO uint8_t ERASE_OFFSET; /*!< Carries information about the erase offset */
+
+}HAL_SD_CardStatusTypedef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group5 SD Card information structure
+ * @{
+ */
+typedef struct
+{
+ HAL_SD_CSDTypedef SD_csd; /*!< SD card specific data register */
+ HAL_SD_CIDTypedef SD_cid; /*!< SD card identification number register */
+ uint64_t CardCapacity; /*!< Card capacity */
+ uint32_t CardBlockSize; /*!< Card block size */
+ uint16_t RCA; /*!< SD relative card address */
+ uint8_t CardType; /*!< SD card type */
+
+}HAL_SD_CardInfoTypedef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group6 SD Error status enumeration Structure definition
+ * @{
+ */
+typedef enum
+{
+/**
+ * @brief SD specific error defines
+ */
+ SD_CMD_CRC_FAIL = (1), /*!< Command response received (but CRC check failed) */
+ SD_DATA_CRC_FAIL = (2), /*!< Data block sent/received (CRC check failed) */
+ SD_CMD_RSP_TIMEOUT = (3), /*!< Command response timeout */
+ SD_DATA_TIMEOUT = (4), /*!< Data timeout */
+ SD_TX_UNDERRUN = (5), /*!< Transmit FIFO underrun */
+ SD_RX_OVERRUN = (6), /*!< Receive FIFO overrun */
+ SD_START_BIT_ERR = (7), /*!< Start bit not detected on all data signals in wide bus mode */
+ SD_CMD_OUT_OF_RANGE = (8), /*!< Command's argument was out of range. */
+ SD_ADDR_MISALIGNED = (9), /*!< Misaligned address */
+ SD_BLOCK_LEN_ERR = (10), /*!< Transferred block length is not allowed for the card or the number of transferred bytes does not match the block length */
+ SD_ERASE_SEQ_ERR = (11), /*!< An error in the sequence of erase command occurs. */
+ SD_BAD_ERASE_PARAM = (12), /*!< An invalid selection for erase groups */
+ SD_WRITE_PROT_VIOLATION = (13), /*!< Attempt to program a write protect block */
+ SD_LOCK_UNLOCK_FAILED = (14), /*!< Sequence or password error has been detected in unlock command or if there was an attempt to access a locked card */
+ SD_COM_CRC_FAILED = (15), /*!< CRC check of the previous command failed */
+ SD_ILLEGAL_CMD = (16), /*!< Command is not legal for the card state */
+ SD_CARD_ECC_FAILED = (17), /*!< Card internal ECC was applied but failed to correct the data */
+ SD_CC_ERROR = (18), /*!< Internal card controller error */
+ SD_GENERAL_UNKNOWN_ERROR = (19), /*!< General or unknown error */
+ SD_STREAM_READ_UNDERRUN = (20), /*!< The card could not sustain data transfer in stream read operation. */
+ SD_STREAM_WRITE_OVERRUN = (21), /*!< The card could not sustain data programming in stream mode */
+ SD_CID_CSD_OVERWRITE = (22), /*!< CID/CSD overwrite error */
+ SD_WP_ERASE_SKIP = (23), /*!< Only partial address space was erased */
+ SD_CARD_ECC_DISABLED = (24), /*!< Command has been executed without using internal ECC */
+ SD_ERASE_RESET = (25), /*!< Erase sequence was cleared before executing because an out of erase sequence command was received */
+ SD_AKE_SEQ_ERROR = (26), /*!< Error in sequence of authentication. */
+ SD_INVALID_VOLTRANGE = (27),
+ SD_ADDR_OUT_OF_RANGE = (28),
+ SD_SWITCH_ERROR = (29),
+ SD_SDIO_DISABLED = (30),
+ SD_SDIO_FUNCTION_BUSY = (31),
+ SD_SDIO_FUNCTION_FAILED = (32),
+ SD_SDIO_UNKNOWN_FUNCTION = (33),
+
+/**
+ * @brief Standard error defines
+ */
+ SD_INTERNAL_ERROR = (34),
+ SD_NOT_CONFIGURED = (35),
+ SD_REQUEST_PENDING = (36),
+ SD_REQUEST_NOT_APPLICABLE = (37),
+ SD_INVALID_PARAMETER = (38),
+ SD_UNSUPPORTED_FEATURE = (39),
+ SD_UNSUPPORTED_HW = (40),
+ SD_ERROR = (41),
+ SD_OK = (0)
+
+}HAL_SD_ErrorTypedef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group7 SD Transfer state enumeration structure
+ * @{
+ */
+typedef enum
+{
+ SD_TRANSFER_OK = 0, /*!< Transfer success */
+ SD_TRANSFER_BUSY = 1, /*!< Transfer is occurring */
+ SD_TRANSFER_ERROR = 2 /*!< Transfer failed */
+
+}HAL_SD_TransferStateTypedef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group8 SD Card State enumeration structure
+ * @{
+ */
+typedef enum
+{
+ SD_CARD_READY = ((uint32_t)0x00000001), /*!< Card state is ready */
+ SD_CARD_IDENTIFICATION = ((uint32_t)0x00000002), /*!< Card is in identification state */
+ SD_CARD_STANDBY = ((uint32_t)0x00000003), /*!< Card is in standby state */
+ SD_CARD_TRANSFER = ((uint32_t)0x00000004), /*!< Card is in transfer state */
+ SD_CARD_SENDING = ((uint32_t)0x00000005), /*!< Card is sending an operation */
+ SD_CARD_RECEIVING = ((uint32_t)0x00000006), /*!< Card is receiving operation information */
+ SD_CARD_PROGRAMMING = ((uint32_t)0x00000007), /*!< Card is in programming state */
+ SD_CARD_DISCONNECTED = ((uint32_t)0x00000008), /*!< Card is disconnected */
+ SD_CARD_ERROR = ((uint32_t)0x000000FF) /*!< Card is in error state */
+
+}HAL_SD_CardStateTypedef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group9 SD Operation enumeration structure
+ * @{
+ */
+typedef enum
+{
+ SD_READ_SINGLE_BLOCK = 0, /*!< Read single block operation */
+ SD_READ_MULTIPLE_BLOCK = 1, /*!< Read multiple blocks operation */
+ SD_WRITE_SINGLE_BLOCK = 2, /*!< Write single block operation */
+ SD_WRITE_MULTIPLE_BLOCK = 3 /*!< Write multiple blocks operation */
+
+}HAL_SD_OperationTypedef;
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SD_Exported_Constants SD Exported Constants
+ * @{
+ */
+
+/**
+ * @brief SD Commands Index
+ */
+#define SD_CMD_GO_IDLE_STATE ((uint8_t)0) /*!< Resets the SD memory card. */
+#define SD_CMD_SEND_OP_COND ((uint8_t)1) /*!< Sends host capacity support information and activates the card's initialization process. */
+#define SD_CMD_ALL_SEND_CID ((uint8_t)2) /*!< Asks any card connected to the host to send the CID numbers on the CMD line. */
+#define SD_CMD_SET_REL_ADDR ((uint8_t)3) /*!< Asks the card to publish a new relative address (RCA). */
+#define SD_CMD_SET_DSR ((uint8_t)4) /*!< Programs the DSR of all cards. */
+#define SD_CMD_SDIO_SEN_OP_COND ((uint8_t)5) /*!< Sends host capacity support information (HCS) and asks the accessed card to send its
+ operating condition register (OCR) content in the response on the CMD line. */
+#define SD_CMD_HS_SWITCH ((uint8_t)6) /*!< Checks switchable function (mode 0) and switch card function (mode 1). */
+#define SD_CMD_SEL_DESEL_CARD ((uint8_t)7) /*!< Selects the card by its own relative address and gets deselected by any other address */
+#define SD_CMD_HS_SEND_EXT_CSD ((uint8_t)8) /*!< Sends SD Memory Card interface condition, which includes host supply voltage information
+ and asks the card whether card supports voltage. */
+#define SD_CMD_SEND_CSD ((uint8_t)9) /*!< Addressed card sends its card specific data (CSD) on the CMD line. */
+#define SD_CMD_SEND_CID ((uint8_t)10) /*!< Addressed card sends its card identification (CID) on the CMD line. */
+#define SD_CMD_READ_DAT_UNTIL_STOP ((uint8_t)11) /*!< SD card doesn't support it. */
+#define SD_CMD_STOP_TRANSMISSION ((uint8_t)12) /*!< Forces the card to stop transmission. */
+#define SD_CMD_SEND_STATUS ((uint8_t)13) /*!< Addressed card sends its status register. */
+#define SD_CMD_HS_BUSTEST_READ ((uint8_t)14)
+#define SD_CMD_GO_INACTIVE_STATE ((uint8_t)15) /*!< Sends an addressed card into the inactive state. */
+#define SD_CMD_SET_BLOCKLEN ((uint8_t)16) /*!< Sets the block length (in bytes for SDSC) for all following block commands
+ (read, write, lock). Default block length is fixed to 512 Bytes. Not effective
+ for SDHS and SDXC. */
+#define SD_CMD_READ_SINGLE_BLOCK ((uint8_t)17) /*!< Reads single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of
+ fixed 512 bytes in case of SDHC and SDXC. */
+#define SD_CMD_READ_MULT_BLOCK ((uint8_t)18) /*!< Continuously transfers data blocks from card to host until interrupted by
+ STOP_TRANSMISSION command. */
+#define SD_CMD_HS_BUSTEST_WRITE ((uint8_t)19) /*!< 64 bytes tuning pattern is sent for SDR50 and SDR104. */
+#define SD_CMD_WRITE_DAT_UNTIL_STOP ((uint8_t)20) /*!< Speed class control command. */
+#define SD_CMD_SET_BLOCK_COUNT ((uint8_t)23) /*!< Specify block count for CMD18 and CMD25. */
+#define SD_CMD_WRITE_SINGLE_BLOCK ((uint8_t)24) /*!< Writes single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of
+ fixed 512 bytes in case of SDHC and SDXC. */
+#define SD_CMD_WRITE_MULT_BLOCK ((uint8_t)25) /*!< Continuously writes blocks of data until a STOP_TRANSMISSION follows. */
+#define SD_CMD_PROG_CID ((uint8_t)26) /*!< Reserved for manufacturers. */
+#define SD_CMD_PROG_CSD ((uint8_t)27) /*!< Programming of the programmable bits of the CSD. */
+#define SD_CMD_SET_WRITE_PROT ((uint8_t)28) /*!< Sets the write protection bit of the addressed group. */
+#define SD_CMD_CLR_WRITE_PROT ((uint8_t)29) /*!< Clears the write protection bit of the addressed group. */
+#define SD_CMD_SEND_WRITE_PROT ((uint8_t)30) /*!< Asks the card to send the status of the write protection bits. */
+#define SD_CMD_SD_ERASE_GRP_START ((uint8_t)32) /*!< Sets the address of the first write block to be erased. (For SD card only). */
+#define SD_CMD_SD_ERASE_GRP_END ((uint8_t)33) /*!< Sets the address of the last write block of the continuous range to be erased. */
+#define SD_CMD_ERASE_GRP_START ((uint8_t)35) /*!< Sets the address of the first write block to be erased. Reserved for each command
+ system set by switch function command (CMD6). */
+#define SD_CMD_ERASE_GRP_END ((uint8_t)36) /*!< Sets the address of the last write block of the continuous range to be erased.
+ Reserved for each command system set by switch function command (CMD6). */
+#define SD_CMD_ERASE ((uint8_t)38) /*!< Reserved for SD security applications. */
+#define SD_CMD_FAST_IO ((uint8_t)39) /*!< SD card doesn't support it (Reserved). */
+#define SD_CMD_GO_IRQ_STATE ((uint8_t)40) /*!< SD card doesn't support it (Reserved). */
+#define SD_CMD_LOCK_UNLOCK ((uint8_t)42) /*!< Sets/resets the password or lock/unlock the card. The size of the data block is set by
+ the SET_BLOCK_LEN command. */
+#define SD_CMD_APP_CMD ((uint8_t)55) /*!< Indicates to the card that the next command is an application specific command rather
+ than a standard command. */
+#define SD_CMD_GEN_CMD ((uint8_t)56) /*!< Used either to transfer a data block to the card or to get a data block from the card
+ for general purpose/application specific commands. */
+#define SD_CMD_NO_CMD ((uint8_t)64)
+
+/**
+ * @brief Following commands are SD Card Specific commands.
+ * SDIO_APP_CMD should be sent before sending these commands.
+ */
+#define SD_CMD_APP_SD_SET_BUSWIDTH ((uint8_t)6) /*!< (ACMD6) Defines the data bus width to be used for data transfer. The allowed data bus
+ widths are given in SCR register. */
+#define SD_CMD_SD_APP_STATUS ((uint8_t)13) /*!< (ACMD13) Sends the SD status. */
+#define SD_CMD_SD_APP_SEND_NUM_WRITE_BLOCKS ((uint8_t)22) /*!< (ACMD22) Sends the number of the written (without errors) write blocks. Responds with
+ 32bit+CRC data block. */
+#define SD_CMD_SD_APP_OP_COND ((uint8_t)41) /*!< (ACMD41) Sends host capacity support information (HCS) and asks the accessed card to
+ send its operating condition register (OCR) content in the response on the CMD line. */
+#define SD_CMD_SD_APP_SET_CLR_CARD_DETECT ((uint8_t)42) /*!< (ACMD42) Connects/Disconnects the 50 KOhm pull-up resistor on CD/DAT3 (pin 1) of the card. */
+#define SD_CMD_SD_APP_SEND_SCR ((uint8_t)51) /*!< Reads the SD Configuration Register (SCR). */
+#define SD_CMD_SDIO_RW_DIRECT ((uint8_t)52) /*!< For SD I/O card only, reserved for security specification. */
+#define SD_CMD_SDIO_RW_EXTENDED ((uint8_t)53) /*!< For SD I/O card only, reserved for security specification. */
+
+/**
+ * @brief Following commands are SD Card Specific security commands.
+ * SD_CMD_APP_CMD should be sent before sending these commands.
+ */
+#define SD_CMD_SD_APP_GET_MKB ((uint8_t)43) /*!< For SD card only */
+#define SD_CMD_SD_APP_GET_MID ((uint8_t)44) /*!< For SD card only */
+#define SD_CMD_SD_APP_SET_CER_RN1 ((uint8_t)45) /*!< For SD card only */
+#define SD_CMD_SD_APP_GET_CER_RN2 ((uint8_t)46) /*!< For SD card only */
+#define SD_CMD_SD_APP_SET_CER_RES2 ((uint8_t)47) /*!< For SD card only */
+#define SD_CMD_SD_APP_GET_CER_RES1 ((uint8_t)48) /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_READ_MULTIPLE_BLOCK ((uint8_t)18) /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK ((uint8_t)25) /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_ERASE ((uint8_t)38) /*!< For SD card only */
+#define SD_CMD_SD_APP_CHANGE_SECURE_AREA ((uint8_t)49) /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_WRITE_MKB ((uint8_t)48) /*!< For SD card only */
+
+/**
+ * @brief Supported SD Memory Cards
+ */
+#define STD_CAPACITY_SD_CARD_V1_1 ((uint32_t)0x00000000)
+#define STD_CAPACITY_SD_CARD_V2_0 ((uint32_t)0x00000001)
+#define HIGH_CAPACITY_SD_CARD ((uint32_t)0x00000002)
+#define MULTIMEDIA_CARD ((uint32_t)0x00000003)
+#define SECURE_DIGITAL_IO_CARD ((uint32_t)0x00000004)
+#define HIGH_SPEED_MULTIMEDIA_CARD ((uint32_t)0x00000005)
+#define SECURE_DIGITAL_IO_COMBO_CARD ((uint32_t)0x00000006)
+#define HIGH_CAPACITY_MMC_CARD ((uint32_t)0x00000007)
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SD_Exported_macros SD Exported Macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+
+/**
+ * @brief Enable the SD device.
+ * @retval None
+ */
+#define __HAL_SD_SDIO_ENABLE() __SDIO_ENABLE()
+
+/**
+ * @brief Disable the SD device.
+ * @retval None
+ */
+#define __HAL_SD_SDIO_DISABLE() __SDIO_DISABLE()
+
+/**
+ * @brief Enable the SDIO DMA transfer.
+ * @retval None
+ */
+#define __HAL_SD_SDIO_DMA_ENABLE() __SDIO_DMA_ENABLE()
+
+/**
+ * @brief Disable the SDIO DMA transfer.
+ * @retval None
+ */
+#define __HAL_SD_SDIO_DMA_DISABLE() __SDIO_DMA_DISABLE()
+
+/**
+ * @brief Enable the SD device interrupt.
+ * @param __HANDLE__: SD Handle
+ * @param __INTERRUPT__: specifies the SDIO interrupt sources to be enabled.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval None
+ */
+#define __HAL_SD_SDIO_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+ * @brief Disable the SD device interrupt.
+ * @param __HANDLE__: SD Handle
+ * @param __INTERRUPT__: specifies the SDIO interrupt sources to be disabled.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval None
+ */
+#define __HAL_SD_SDIO_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified SD flag is set or not.
+ * @param __HANDLE__: SD Handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDIO_FLAG_DTIMEOUT: Data timeout
+ * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
+ * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode.
+ * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDIO_FLAG_CMDACT: Command transfer in progress
+ * @arg SDIO_FLAG_TXACT: Data transmit in progress
+ * @arg SDIO_FLAG_RXACT: Data receive in progress
+ * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
+ * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
+ * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full
+ * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full
+ * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty
+ * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty
+ * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO
+ * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO
+ * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval The new state of SD FLAG (SET or RESET).
+ */
+#define __HAL_SD_SDIO_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__))
+
+/**
+ * @brief Clear the SD's pending flags.
+ * @param __HANDLE__: SD Handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDIO_FLAG_DTIMEOUT: Data timeout
+ * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
+ * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode
+ * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval None
+ */
+#define __HAL_SD_SDIO_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__))
+
+/**
+ * @brief Check whether the specified SD interrupt has occurred or not.
+ * @param __HANDLE__: SD Handle
+ * @param __INTERRUPT__: specifies the SDIO interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval The new state of SD IT (SET or RESET).
+ */
+#define __HAL_SD_SDIO_GET_IT (__HANDLE__, __INTERRUPT__) __SDIO_GET_IT ((__HANDLE__)->Instance, __INTERRUPT__)
+
+/**
+ * @brief Clear the SD's interrupt pending bits.
+ * @param __HANDLE__ : SD Handle
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIO_DCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval None
+ */
+#define __HAL_SD_SDIO_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SD_Exported_Functions SD Exported Functions
+ * @{
+ */
+
+/** @defgroup SD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+HAL_SD_ErrorTypedef HAL_SD_Init(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *SDCardInfo);
+HAL_StatusTypeDef HAL_SD_DeInit (SD_HandleTypeDef *hsd);
+void HAL_SD_MspInit(SD_HandleTypeDef *hsd);
+void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd);
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Functions_Group2 I/O operation functions
+ * @{
+ */
+/* Blocking mode: Polling */
+HAL_SD_ErrorTypedef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint64_t startaddr, uint64_t endaddr);
+
+/* Non-Blocking mode: Interrupt */
+void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd);
+
+/* Callback in non blocking modes (DMA) */
+void HAL_SD_DMA_RxCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_DMA_RxErrorCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_DMA_TxCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_DMA_TxErrorCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_XferCpltCallback(SD_HandleTypeDef *hsd);
+void HAL_SD_XferErrorCallback(SD_HandleTypeDef *hsd);
+
+/* Non-Blocking mode: DMA */
+HAL_SD_ErrorTypedef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_CheckWriteOperation(SD_HandleTypeDef *hsd, uint32_t Timeout);
+HAL_SD_ErrorTypedef HAL_SD_CheckReadOperation(SD_HandleTypeDef *hsd, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+HAL_SD_ErrorTypedef HAL_SD_Get_CardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *pCardInfo);
+HAL_SD_ErrorTypedef HAL_SD_WideBusOperation_Config(SD_HandleTypeDef *hsd, uint32_t WideMode);
+HAL_SD_ErrorTypedef HAL_SD_StopTransfer(SD_HandleTypeDef *hsd);
+HAL_SD_ErrorTypedef HAL_SD_HighSpeed (SD_HandleTypeDef *hsd);
+/**
+ * @}
+ */
+
+/* Peripheral State functions ************************************************/
+/** @defgroup SD_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+HAL_SD_ErrorTypedef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus);
+HAL_SD_ErrorTypedef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypedef *pCardStatus);
+HAL_SD_TransferStateTypedef HAL_SD_GetStatus(SD_HandleTypeDef *hsd);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup SD_Private_Types SD Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup SD_Private_Defines SD Private Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup SD_Private_Variables SD Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup SD_Private_Constants SD Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup SD_Private_Macros SD Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup SD_Private_Functions_Prototypes SD Private Functions Prototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SD_Private_Functions SD Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_sdram.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,196 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sdram.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of SDRAM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SDRAM_H
+#define __STM32F4xx_HAL_SDRAM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_fmc.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SDRAM
+ * @{
+ */
+
+/* Exported typedef ----------------------------------------------------------*/
+/** @defgroup SDRAM_Exported_Types SDRAM Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL SDRAM State structure definition
+ */
+typedef enum
+{
+ HAL_SDRAM_STATE_RESET = 0x00, /*!< SDRAM not yet initialized or disabled */
+ HAL_SDRAM_STATE_READY = 0x01, /*!< SDRAM initialized and ready for use */
+ HAL_SDRAM_STATE_BUSY = 0x02, /*!< SDRAM internal process is ongoing */
+ HAL_SDRAM_STATE_ERROR = 0x03, /*!< SDRAM error state */
+ HAL_SDRAM_STATE_WRITE_PROTECTED = 0x04, /*!< SDRAM device write protected */
+ HAL_SDRAM_STATE_PRECHARGED = 0x05 /*!< SDRAM device precharged */
+
+}HAL_SDRAM_StateTypeDef;
+
+/**
+ * @brief SDRAM handle Structure definition
+ */
+typedef struct
+{
+ FMC_SDRAM_TypeDef *Instance; /*!< Register base address */
+
+ FMC_SDRAM_InitTypeDef Init; /*!< SDRAM device configuration parameters */
+
+ __IO HAL_SDRAM_StateTypeDef State; /*!< SDRAM access state */
+
+ HAL_LockTypeDef Lock; /*!< SDRAM locking object */
+
+ DMA_HandleTypeDef *hdma; /*!< Pointer DMA handler */
+
+}SDRAM_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SDRAM_Exported_Macros SDRAM Exported Macros
+ * @{
+ */
+
+/** @brief Reset SDRAM handle state
+ * @param __HANDLE__: specifies the SDRAM handle.
+ * @retval None
+ */
+#define __HAL_SDRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SDRAM_STATE_RESET)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SDRAM_Exported_Functions SDRAM Exported Functions
+ * @{
+ */
+
+/** @addtogroup SDRAM_Exported_Functions_Group1
+ * @{
+ */
+
+/* Initialization/de-initialization functions *********************************/
+HAL_StatusTypeDef HAL_SDRAM_Init(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_TimingTypeDef *Timing);
+HAL_StatusTypeDef HAL_SDRAM_DeInit(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram);
+
+void HAL_SDRAM_IRQHandler(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_RefreshErrorCallback(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SDRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/** @addtogroup SDRAM_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ****************************************************/
+HAL_StatusTypeDef HAL_SDRAM_Read_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Read_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Read_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+
+HAL_StatusTypeDef HAL_SDRAM_Read_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t * pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+/**
+ * @}
+ */
+
+/** @addtogroup SDRAM_Exported_Functions_Group3
+ * @{
+ */
+/* SDRAM Control functions *****************************************************/
+HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Enable(SDRAM_HandleTypeDef *hsdram);
+HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Disable(SDRAM_HandleTypeDef *hsdram);
+HAL_StatusTypeDef HAL_SDRAM_SendCommand(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SDRAM_ProgramRefreshRate(SDRAM_HandleTypeDef *hsdram, uint32_t RefreshRate);
+HAL_StatusTypeDef HAL_SDRAM_SetAutoRefreshNumber(SDRAM_HandleTypeDef *hsdram, uint32_t AutoRefreshNumber);
+uint32_t HAL_SDRAM_GetModeStatus(SDRAM_HandleTypeDef *hsdram);
+/**
+ * @}
+ */
+
+/** @addtogroup SDRAM_Exported_Functions_Group4
+ * @{
+ */
+/* SDRAM State functions ********************************************************/
+HAL_SDRAM_StateTypeDef HAL_SDRAM_GetState(SDRAM_HandleTypeDef *hsdram);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SDRAM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_smartcard.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,620 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_smartcard.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of SMARTCARD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SMARTCARD_H
+#define __STM32F4xx_HAL_SMARTCARD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SMARTCARD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types
+ * @{
+ */
+
+/**
+ * @brief SMARTCARD Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the SmartCard communication baud rate.
+ The baud rate is computed using the following formula:
+ - IntegerDivider = ((PCLKx) / (8 * (hirda->Init.BaudRate)))
+ - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref SMARTCARD_Word_Length */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref SMARTCARD_Stop_Bits */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref SMARTCARD_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits).*/
+
+ uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref SMARTCARD_Mode */
+
+ uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
+ This parameter can be a value of @ref SMARTCARD_Clock_Polarity */
+
+ uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref SMARTCARD_Clock_Phase */
+
+ uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref SMARTCARD_Last_Bit */
+
+ uint32_t Prescaler; /*!< Specifies the SmartCard Prescaler value used for dividing the system clock
+ to provide the smartcard clock
+ This parameter can be a value of @ref SMARTCARD_Prescaler */
+
+ uint32_t GuardTime; /*!< Specifies the SmartCard Guard Time value in terms of number of baud clocks
+ The value given in the register (5 significant bits) is multiplied by 2
+ to give the division factor of the source clock frequency */
+
+ uint32_t NACKState; /*!< Specifies the SmartCard NACK Transmission state.
+ This parameter can be a value of @ref SmartCard_NACK_State */
+}SMARTCARD_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_SMARTCARD_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */
+ HAL_SMARTCARD_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_SMARTCARD_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_SMARTCARD_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_SMARTCARD_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_SMARTCARD_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_SMARTCARD_STATE_ERROR = 0x04 /*!< Error */
+}HAL_SMARTCARD_StateTypeDef;
+
+/**
+ * @brief SMARTCARD handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /* USART registers base address */
+
+ SMARTCARD_InitTypeDef Init; /* SmartCard communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to SmartCard Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* SmartCard Tx Transfer size */
+
+ uint16_t TxXferCount; /* SmartCard Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to SmartCard Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* SmartCard Rx Transfer size */
+
+ uint16_t RxXferCount; /* SmartCard Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /* SmartCard Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* SmartCard Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ __IO HAL_SMARTCARD_StateTypeDef State; /* SmartCard communication state */
+
+ __IO uint32_t ErrorCode; /* SmartCard Error code */
+
+}SMARTCARD_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported constants
+ * @{
+ */
+/** @defgroup SMARTCARD_Error_Code SMARTCARD Error Code
+ * @brief SMARTCARD Error Code
+ * @{
+ */
+#define HAL_SMARTCARD_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_SMARTCARD_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */
+#define HAL_SMARTCARD_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */
+#define HAL_SMARTCARD_ERROR_FE ((uint32_t)0x00000004) /*!< Frame error */
+#define HAL_SMARTCARD_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */
+#define HAL_SMARTCARD_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length
+ * @{
+ */
+#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits
+ * @{
+ */
+#define SMARTCARD_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0)
+#define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Parity SMARTCARD Parity
+ * @{
+ */
+#define SMARTCARD_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define SMARTCARD_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Mode SMARTCARD Mode
+ * @{
+ */
+#define SMARTCARD_MODE_RX ((uint32_t)USART_CR1_RE)
+#define SMARTCARD_MODE_TX ((uint32_t)USART_CR1_TE)
+#define SMARTCARD_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity
+ * @{
+ */
+#define SMARTCARD_POLARITY_LOW ((uint32_t)0x00000000)
+#define SMARTCARD_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase
+ * @{
+ */
+#define SMARTCARD_PHASE_1EDGE ((uint32_t)0x00000000)
+#define SMARTCARD_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit
+ * @{
+ */
+#define SMARTCARD_LASTBIT_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL)
+/**
+ * @}
+ */
+
+/** @defgroup SmartCard_NACK_State SMARTCARD NACK State
+ * @{
+ */
+#define SMARTCARD_NACK_ENABLE ((uint32_t)USART_CR3_NACK)
+#define SMARTCARD_NACK_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup SmartCard_DMA_Requests SMARTCARD DMA requests
+ * @{
+ */
+#define SMARTCARD_DMAREQ_TX ((uint32_t)USART_CR3_DMAT)
+#define SMARTCARD_DMAREQ_RX ((uint32_t)USART_CR3_DMAR)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Prescaler SMARTCARD Prescaler
+ * @{
+ */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV2 ((uint32_t)0x00000001) /*!< SYSCLK divided by 2 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV4 ((uint32_t)0x00000002) /*!< SYSCLK divided by 4 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV6 ((uint32_t)0x00000003) /*!< SYSCLK divided by 6 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV8 ((uint32_t)0x00000004) /*!< SYSCLK divided by 8 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV10 ((uint32_t)0x00000005) /*!< SYSCLK divided by 10 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV12 ((uint32_t)0x00000006) /*!< SYSCLK divided by 12 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV14 ((uint32_t)0x00000007) /*!< SYSCLK divided by 14 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV16 ((uint32_t)0x00000008) /*!< SYSCLK divided by 16 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV18 ((uint32_t)0x00000009) /*!< SYSCLK divided by 18 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV20 ((uint32_t)0x0000000A) /*!< SYSCLK divided by 20 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV22 ((uint32_t)0x0000000B) /*!< SYSCLK divided by 22 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV24 ((uint32_t)0x0000000C) /*!< SYSCLK divided by 24 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV26 ((uint32_t)0x0000000D) /*!< SYSCLK divided by 26 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV28 ((uint32_t)0x0000000E) /*!< SYSCLK divided by 28 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV30 ((uint32_t)0x0000000F) /*!< SYSCLK divided by 30 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV32 ((uint32_t)0x00000010) /*!< SYSCLK divided by 32 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV34 ((uint32_t)0x00000011) /*!< SYSCLK divided by 34 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV36 ((uint32_t)0x00000012) /*!< SYSCLK divided by 36 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV38 ((uint32_t)0x00000013) /*!< SYSCLK divided by 38 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV40 ((uint32_t)0x00000014) /*!< SYSCLK divided by 40 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV42 ((uint32_t)0x00000015) /*!< SYSCLK divided by 42 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV44 ((uint32_t)0x00000016) /*!< SYSCLK divided by 44 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV46 ((uint32_t)0x00000017) /*!< SYSCLK divided by 46 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV48 ((uint32_t)0x00000018) /*!< SYSCLK divided by 48 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV50 ((uint32_t)0x00000019) /*!< SYSCLK divided by 50 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV52 ((uint32_t)0x0000001A) /*!< SYSCLK divided by 52 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV54 ((uint32_t)0x0000001B) /*!< SYSCLK divided by 54 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV56 ((uint32_t)0x0000001C) /*!< SYSCLK divided by 56 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV58 ((uint32_t)0x0000001D) /*!< SYSCLK divided by 58 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV60 ((uint32_t)0x0000001E) /*!< SYSCLK divided by 60 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV62 ((uint32_t)0x0000001F) /*!< SYSCLK divided by 62 */
+/**
+ * @}
+ */
+
+/** @defgroup SmartCard_Flags SMARTCARD Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the SR register
+ * @{
+ */
+#define SMARTCARD_FLAG_TXE ((uint32_t)0x00000080)
+#define SMARTCARD_FLAG_TC ((uint32_t)0x00000040)
+#define SMARTCARD_FLAG_RXNE ((uint32_t)0x00000020)
+#define SMARTCARD_FLAG_IDLE ((uint32_t)0x00000010)
+#define SMARTCARD_FLAG_ORE ((uint32_t)0x00000008)
+#define SMARTCARD_FLAG_NE ((uint32_t)0x00000004)
+#define SMARTCARD_FLAG_FE ((uint32_t)0x00000002)
+#define SMARTCARD_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup SmartCard_Interrupt_definition SMARTCARD Interrupts Definition
+ * Elements values convention: 0xY000XXXX
+ * - XXXX : Interrupt mask in the XX register
+ * - Y : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR3 register
+ * @{
+ */
+#define SMARTCARD_IT_PE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_PEIE))
+#define SMARTCARD_IT_TXE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_TXEIE))
+#define SMARTCARD_IT_TC ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_TCIE))
+#define SMARTCARD_IT_RXNE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_RXNEIE))
+#define SMARTCARD_IT_IDLE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_IDLEIE))
+#define SMARTCARD_IT_ERR ((uint32_t)(SMARTCARD_CR3_REG_INDEX << 28 | USART_CR3_EIE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros
+ * @{
+ */
+
+/** @brief Reset SMARTCARD handle state
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMARTCARD_STATE_RESET)
+
+/** @brief Flushs the Smartcard DR register
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ */
+#define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
+
+/** @brief Checks whether the specified Smartcard flag is set or not.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_FLAG_TXE: Transmit data register empty flag
+ * @arg SMARTCARD_FLAG_TC: Transmission Complete flag
+ * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag
+ * @arg SMARTCARD_FLAG_IDLE: Idle Line detection flag
+ * @arg SMARTCARD_FLAG_ORE: Overrun Error flag
+ * @arg SMARTCARD_FLAG_NE: Noise Error flag
+ * @arg SMARTCARD_FLAG_FE: Framing Error flag
+ * @arg SMARTCARD_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified Smartcard pending flags.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg SMARTCARD_FLAG_TC: Transmission Complete flag.
+ * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag.
+ *
+ * @note PE (Parity error), FE (Framing error), NE (Noise error) and ORE (Overrun
+ * error) flags are cleared by software sequence: a read operation to
+ * USART_SR register followed by a read operation to USART_DR register.
+ * @note RXNE flag can be also cleared by a read to the USART_DR register.
+ * @note TC flag can be also cleared by software sequence: a read operation to
+ * USART_SR register followed by a write operation to USART_DR register.
+ * @note TXE flag is cleared only by a write to the USART_DR register.
+ */
+#define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief Clear the SMARTCARD PE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ tmpreg = (__HANDLE__)->Instance->DR; \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Clear the SMARTCARD FE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the SMARTCARD NE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the SMARTCARD ORE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the SMARTCARD IDLE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+
+/** @brief Enables or disables the specified SmartCard interrupts.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @param __INTERRUPT__: specifies the SMARTCARD interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ */
+#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK)))
+#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & SMARTCARD_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & SMARTCARD_IT_MASK)))
+
+/** @brief Checks whether the specified SmartCard interrupt has occurred or not.
+ * @param __HANDLE__: specifies the SmartCard Handle.
+ * @param __IT__: specifies the SMARTCARD interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt
+ * @arg SMARTCARD_IT_ERR: Error interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == 1)? (__HANDLE__)->Instance->CR1: (__HANDLE__)->Instance->CR3) & (((uint32_t)(__IT__)) & SMARTCARD_IT_MASK))
+
+/** @brief Macro to enable the SMARTCARD's one bit sample method
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+
+/** @brief Macro to disable the SMARTCARD's one bit sample method
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
+
+/** @brief Enable the USART associated to the SMARTCARD Handle
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @retval None
+ */
+#define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable the USART associated to the SMARTCARD Handle
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @retval None
+ */
+#define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/** @brief Macros to enable or disable the SmartCard DMA request.
+ * @param __HANDLE__: specifies the SmartCard Handle.
+ * @param __REQUEST__: specifies the SmartCard DMA request.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_DMAREQ_TX: SmartCard DMA transmit request
+ * @arg SMARTCARD_DMAREQ_RX: SmartCard DMA receive request
+ */
+#define __HAL_SMARTCARD_DMA_REQUEST_ENABLE(__HANDLE__, __REQUEST__) ((__HANDLE__)->Instance->CR3 |= (__REQUEST__))
+#define __HAL_SMARTCARD_DMA_REQUEST_DISABLE(__HANDLE__, __REQUEST__) ((__HANDLE__)->Instance->CR3 &= ~(__REQUEST__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SMARTCARD_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup SMARTCARD_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsc);
+HAL_StatusTypeDef HAL_SMARTCARD_ReInit(SMARTCARD_HandleTypeDef *hsc);
+HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsc);
+/**
+ * @}
+ */
+
+/** @addtogroup SMARTCARD_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsc);
+/**
+ * @}
+ */
+
+/** @addtogroup SMARTCARD_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsc);
+uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsc);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup SMARTCARD_Private_Constants SMARTCARD Private Constants
+ * @{
+ */
+
+/** @brief SMARTCARD interruptions flag mask
+ *
+ */
+#define SMARTCARD_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \
+ USART_CR1_IDLEIE | USART_CR3_EIE )
+#define SMARTCARD_DIV(_PCLK_, _BAUD_) (((_PCLK_)*25)/(4*(_BAUD_)))
+#define SMARTCARD_DIVMANT(_PCLK_, _BAUD_) (SMARTCARD_DIV((_PCLK_), (_BAUD_))/100)
+#define SMARTCARD_DIVFRAQ(_PCLK_, _BAUD_) (((SMARTCARD_DIV((_PCLK_), (_BAUD_)) - (SMARTCARD_DIVMANT((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100)
+#define SMARTCARD_BRR(_PCLK_, _BAUD_) ((SMARTCARD_DIVMANT((_PCLK_), (_BAUD_)) << 4)|(SMARTCARD_DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0F))
+
+#define SMARTCARD_CR1_REG_INDEX 1
+#define SMARTCARD_CR3_REG_INDEX 3
+/**
+ * @}
+ */
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup SMARTCARD_Private_Macros SMARTCARD Private Macros
+ * @{
+ */
+#define IS_SMARTCARD_WORD_LENGTH(LENGTH) ((LENGTH) == SMARTCARD_WORDLENGTH_9B)
+#define IS_SMARTCARD_STOPBITS(STOPBITS) (((STOPBITS) == SMARTCARD_STOPBITS_0_5) || \
+ ((STOPBITS) == SMARTCARD_STOPBITS_1_5))
+#define IS_SMARTCARD_PARITY(PARITY) (((PARITY) == SMARTCARD_PARITY_EVEN) || \
+ ((PARITY) == SMARTCARD_PARITY_ODD))
+#define IS_SMARTCARD_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3) == 0x00) && ((MODE) != (uint32_t)0x000000))
+#define IS_SMARTCARD_POLARITY(CPOL) (((CPOL) == SMARTCARD_POLARITY_LOW) || ((CPOL) == SMARTCARD_POLARITY_HIGH))
+#define IS_SMARTCARD_PHASE(CPHA) (((CPHA) == SMARTCARD_PHASE_1EDGE) || ((CPHA) == SMARTCARD_PHASE_2EDGE))
+#define IS_SMARTCARD_LASTBIT(LASTBIT) (((LASTBIT) == SMARTCARD_LASTBIT_DISABLE) || \
+ ((LASTBIT) == SMARTCARD_LASTBIT_ENABLE))
+#define IS_SMARTCARD_NACK_STATE(NACK) (((NACK) == SMARTCARD_NACK_ENABLE) || \
+ ((NACK) == SMARTCARD_NACK_DISABLE))
+#define IS_SMARTCARD_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001)
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SMARTCARD_Private_Functions SMARTCARD Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SMARTCARD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_spdifrx.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,559 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_spdifrx.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of SPDIFRX HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SPDIFRX_H
+#define __STM32F4xx_HAL_SPDIFRX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F446xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SPDIFRX
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SPDIFRX_Exported_Types SPDIFRX Exported Types
+ * @{
+ */
+
+/**
+ * @brief SPDIFRX Init structure definition
+ */
+typedef struct
+{
+ uint32_t InputSelection; /*!< Specifies the SPDIF input selection.
+ This parameter can be a value of @ref SPDIFRX_Input_Selection */
+
+ uint32_t Retries; /*!< Specifies the Maximum allowed re-tries during synchronization phase.
+ This parameter can be a value of @ref SPDIFRX_Max_Retries */
+
+ uint32_t WaitForActivity; /*!< Specifies the wait for activity on SPDIF selected input.
+ This parameter can be a value of @ref SPDIFRX_Wait_For_Activity. */
+
+ uint32_t ChannelSelection; /*!< Specifies whether the control flow will take the channel status from channel A or B.
+ This parameter can be a value of @ref SPDIFRX_Channel_Selection */
+
+ uint32_t DataFormat; /*!< Specifies the Data samples format (LSB, MSB, ...).
+ This parameter can be a value of @ref SPDIFRX_Data_Format */
+
+ uint32_t StereoMode; /*!< Specifies whether the peripheral is in stereo or mono mode.
+ This parameter can be a value of @ref SPDIFRX_Stereo_Mode */
+
+ uint32_t PreambleTypeMask; /*!< Specifies whether The preamble type bits are copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_PT_Mask */
+
+ uint32_t ChannelStatusMask; /*!< Specifies whether the channel status and user bits are copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_ChannelStatus_Mask */
+
+ uint32_t ValidityBitMask; /*!< Specifies whether the validity bit is copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_V_Mask */
+
+ uint32_t ParityErrorMask; /*!< Specifies whether the parity error bit is copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_PE_Mask */
+
+}SPDIFRX_InitTypeDef;
+
+/**
+ * @brief SPDIFRX SetDataFormat structure definition
+ */
+typedef struct
+{
+ uint32_t DataFormat; /*!< Specifies the Data samples format (LSB, MSB, ...).
+ This parameter can be a value of @ref SPDIFRX_Data_Format */
+
+ uint32_t StereoMode; /*!< Specifies whether the peripheral is in stereo or mono mode.
+ This parameter can be a value of @ref SPDIFRX_Stereo_Mode */
+
+ uint32_t PreambleTypeMask; /*!< Specifies whether The preamble type bits are copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_PT_Mask */
+
+ uint32_t ChannelStatusMask; /*!< Specifies whether the channel status and user bits are copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_ChannelStatus_Mask */
+
+ uint32_t ValidityBitMask; /*!< Specifies whether the validity bit is copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_V_Mask */
+
+ uint32_t ParityErrorMask; /*!< Specifies whether the parity error bit is copied or not into the received frame.
+ This parameter can be a value of @ref SPDIFRX_PE_Mask */
+
+}SPDIFRX_SetDataFormatTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_SPDIFRX_STATE_RESET = 0x00, /*!< SPDIFRX not yet initialized or disabled */
+ HAL_SPDIFRX_STATE_READY = 0x01, /*!< SPDIFRX initialized and ready for use */
+ HAL_SPDIFRX_STATE_BUSY = 0x02, /*!< SPDIFRX internal process is ongoing */
+ HAL_SPDIFRX_STATE_BUSY_RX = 0x03, /*!< SPDIFRX internal Data Flow RX process is ongoing */
+ HAL_SPDIFRX_STATE_BUSY_CX = 0x04, /*!< SPDIFRX internal Control Flow RX process is ongoing */
+ HAL_SPDIFRX_STATE_ERROR = 0x07 /*!< SPDIFRX error state */
+}HAL_SPDIFRX_StateTypeDef;
+
+/**
+ * @brief SPDIFRX handle Structure definition
+ */
+typedef struct
+{
+ SPDIFRX_TypeDef *Instance; /* SPDIFRX registers base address */
+
+ SPDIFRX_InitTypeDef Init; /* SPDIFRX communication parameters */
+
+ uint32_t *pRxBuffPtr; /* Pointer to SPDIFRX Rx transfer buffer */
+
+ uint32_t *pCsBuffPtr; /* Pointer to SPDIFRX Cx transfer buffer */
+
+ __IO uint16_t RxXferSize; /* SPDIFRX Rx transfer size */
+
+ __IO uint16_t RxXferCount; /* SPDIFRX Rx transfer counter
+ (This field is initialized at the
+ same value as transfer size at the
+ beginning of the transfer and
+ decremented when a sample is received.
+ NbSamplesReceived = RxBufferSize-RxBufferCount) */
+
+ __IO uint16_t CsXferSize; /* SPDIFRX Rx transfer size */
+
+ __IO uint16_t CsXferCount; /* SPDIFRX Rx transfer counter
+ (This field is initialized at the
+ same value as transfer size at the
+ beginning of the transfer and
+ decremented when a sample is received.
+ NbSamplesReceived = RxBufferSize-RxBufferCount) */
+
+ DMA_HandleTypeDef *hdmaCsRx; /* SPDIFRX EC60958_channel_status and user_information DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmaDrRx; /* SPDIFRX Rx DMA handle parameters */
+
+ __IO HAL_LockTypeDef Lock; /* SPDIFRX locking object */
+
+ __IO HAL_SPDIFRX_StateTypeDef State; /* SPDIFRX communication state */
+
+ __IO uint32_t ErrorCode; /* SPDIFRX Error code */
+
+}SPDIFRX_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SPDIFRX_Exported_Constants SPDIFRX Exported Constants
+ * @{
+ */
+/** @defgroup SPDIFRX_ErrorCode SPDIFRX Error Code
+ * @{
+ */
+#define HAL_SPDIFRX_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_SPDIFRX_ERROR_TIMEOUT ((uint32_t)0x00000001) /*!< Timeout error */
+#define HAL_SPDIFRX_ERROR_OVR ((uint32_t)0x00000002) /*!< OVR error */
+#define HAL_SPDIFRX_ERROR_PE ((uint32_t)0x00000004) /*!< Parity error */
+#define HAL_SPDIFRX_ERROR_DMA ((uint32_t)0x00000008) /*!< DMA transfer error */
+#define HAL_SPDIFRX_ERROR_UNKNOWN ((uint32_t)0x00000010) /*!< Unknown Error error */
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Input_Selection SPDIFRX Input Selection
+ * @{
+ */
+#define SPDIFRX_INPUT_IN0 ((uint32_t)0x00000000)
+#define SPDIFRX_INPUT_IN1 ((uint32_t)0x00010000)
+#define SPDIFRX_INPUT_IN2 ((uint32_t)0x00020000)
+#define SPDIFRX_INPUT_IN3 ((uint32_t)0x00030000)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Max_Retries SPDIFRX Maximum Retries
+ * @{
+ */
+#define SPDIFRX_MAXRETRIES_NONE ((uint32_t)0x00000000)
+#define SPDIFRX_MAXRETRIES_3 ((uint32_t)0x00001000)
+#define SPDIFRX_MAXRETRIES_15 ((uint32_t)0x00002000)
+#define SPDIFRX_MAXRETRIES_63 ((uint32_t)0x00003000)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Wait_For_Activity SPDIFRX Wait For Activity
+ * @{
+ */
+#define SPDIFRX_WAITFORACTIVITY_OFF ((uint32_t)0x00000000)
+#define SPDIFRX_WAITFORACTIVITY_ON ((uint32_t)SPDIFRX_CR_WFA)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_PT_Mask SPDIFRX Preamble Type Mask
+* @{
+*/
+#define SPDIFRX_PREAMBLETYPEMASK_OFF ((uint32_t)0x00000000)
+#define SPDIFRX_PREAMBLETYPEMASK_ON ((uint32_t)SPDIFRX_CR_PTMSK)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_ChannelStatus_Mask SPDIFRX Channel Status Mask
+* @{
+*/
+#define SPDIFRX_CHANNELSTATUS_OFF ((uint32_t)0x00000000) /* The channel status and user bits are copied into the SPDIF_DR */
+#define SPDIFRX_CHANNELSTATUS_ON ((uint32_t)SPDIFRX_CR_CUMSK) /* The channel status and user bits are not copied into the SPDIF_DR, zeros are written instead*/
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_V_Mask SPDIFRX Validity Mask
+* @{
+*/
+#define SPDIFRX_VALIDITYMASK_OFF ((uint32_t)0x00000000)
+#define SPDIFRX_VALIDITYMASK_ON ((uint32_t)SPDIFRX_CR_VMSK)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_PE_Mask SPDIFRX Parity Error Mask
+* @{
+*/
+#define SPDIFRX_PARITYERRORMASK_OFF ((uint32_t)0x00000000)
+#define SPDIFRX_PARITYERRORMASK_ON ((uint32_t)SPDIFRX_CR_PMSK)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Channel_Selection SPDIFRX Channel Selection
+ * @{
+ */
+#define SPDIFRX_CHANNEL_A ((uint32_t)0x00000000)
+#define SPDIFRX_CHANNEL_B ((uint32_t)SPDIFRX_CR_CHSEL)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Data_Format SPDIFRX Data Format
+ * @{
+ */
+#define SPDIFRX_DATAFORMAT_LSB ((uint32_t)0x00000000)
+#define SPDIFRX_DATAFORMAT_MSB ((uint32_t)0x00000010)
+#define SPDIFRX_DATAFORMAT_32BITS ((uint32_t)0x00000020)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Stereo_Mode SPDIFRX Stereo Mode
+ * @{
+ */
+#define SPDIFRX_STEREOMODE_DISABLE ((uint32_t)0x00000000)
+#define SPDIFRX_STEREOMODE_ENABLE ((uint32_t)SPDIFRX_CR_RXSTEO)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_State SPDIFRX State
+ * @{
+ */
+
+#define SPDIFRX_STATE_IDLE ((uint32_t)0xFFFFFFFC)
+#define SPDIFRX_STATE_SYNC ((uint32_t)0x00000001)
+#define SPDIFRX_STATE_RCV ((uint32_t)SPDIFRX_CR_SPDIFEN)
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Interrupts_Definition SPDIFRX Interrupts Definition
+ * @{
+ */
+#define SPDIFRX_IT_RXNE ((uint32_t)SPDIFRX_IMR_RXNEIE)
+#define SPDIFRX_IT_CSRNE ((uint32_t)SPDIFRX_IMR_CSRNEIE)
+#define SPDIFRX_IT_PERRIE ((uint32_t)SPDIFRX_IMR_PERRIE)
+#define SPDIFRX_IT_OVRIE ((uint32_t)SPDIFRX_IMR_OVRIE)
+#define SPDIFRX_IT_SBLKIE ((uint32_t)SPDIFRX_IMR_SBLKIE)
+#define SPDIFRX_IT_SYNCDIE ((uint32_t)SPDIFRX_IMR_SYNCDIE)
+#define SPDIFRX_IT_IFEIE ((uint32_t)SPDIFRX_IMR_IFEIE )
+/**
+ * @}
+ */
+
+/** @defgroup SPDIFRX_Flags_Definition SPDIFRX Flags Definition
+ * @{
+ */
+#define SPDIFRX_FLAG_RXNE ((uint32_t)SPDIFRX_SR_RXNE)
+#define SPDIFRX_FLAG_CSRNE ((uint32_t)SPDIFRX_SR_CSRNE)
+#define SPDIFRX_FLAG_PERR ((uint32_t)SPDIFRX_SR_PERR)
+#define SPDIFRX_FLAG_OVR ((uint32_t)SPDIFRX_SR_OVR)
+#define SPDIFRX_FLAG_SBD ((uint32_t)SPDIFRX_SR_SBD)
+#define SPDIFRX_FLAG_SYNCD ((uint32_t)SPDIFRX_SR_SYNCD)
+#define SPDIFRX_FLAG_FERR ((uint32_t)SPDIFRX_SR_FERR)
+#define SPDIFRX_FLAG_SERR ((uint32_t)SPDIFRX_SR_SERR)
+#define SPDIFRX_FLAG_TERR ((uint32_t)SPDIFRX_SR_TERR)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup SPDIFRX_Exported_macros SPDIFRX Exported Macros
+ * @{
+ */
+
+/** @brief Reset SPDIFRX handle state
+ * @param __HANDLE__: SPDIFRX handle.
+ * @retval None
+ */
+#define __HAL_SPDIFRX_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = (uint16_t)SPDIFRX_CR_SPDIFEN)
+
+/** @brief Disable the specified SPDIFRX peripheral (IDLE State).
+ * @param __HANDLE__: specifies the SPDIFRX Handle.
+ * @retval None
+ */
+#define __HAL_SPDIFRX_IDLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= SPDIFRX_STATE_IDLE)
+
+/** @brief Enable the specified SPDIFRX peripheral (SYNC State).
+ * @param __HANDLE__: specifies the SPDIFRX Handle.
+ * @retval None
+ */
+#define __HAL_SPDIFRX_SYNC(__HANDLE__) ((__HANDLE__)->Instance->CR |= SPDIFRX_STATE_SYNC)
+
+
+/** @brief Enable the specified SPDIFRX peripheral (RCV State).
+ * @param __HANDLE__: specifies the SPDIFRX Handle.
+ * @retval None
+ */
+#define __HAL_SPDIFRX_RCV(__HANDLE__) ((__HANDLE__)->Instance->CR |= SPDIFRX_STATE_RCV)
+
+
+/** @brief Enable or disable the specified SPDIFRX interrupts.
+ * @param __HANDLE__: specifies the SPDIFRX Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg SPDIFRX_IT_RXNE
+ * @arg SPDIFRX_IT_CSRNE
+ * @arg SPDIFRX_IT_PERRIE
+ * @arg SPDIFRX_IT_OVRIE
+ * @arg SPDIFRX_IT_SBLKIE
+ * @arg SPDIFRX_IT_SYNCDIE
+ * @arg SPDIFRX_IT_IFEIE
+ * @retval None
+ */
+#define __HAL_SPDIFRX_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR |= (__INTERRUPT__))
+#define __HAL_SPDIFRX_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR &= (uint16_t)(~(__INTERRUPT__)))
+
+/** @brief Checks if the specified SPDIFRX interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the SPDIFRX Handle.
+ * @param __INTERRUPT__: specifies the SPDIFRX interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SPDIFRX_IT_RXNE
+ * @arg SPDIFRX_IT_CSRNE
+ * @arg SPDIFRX_IT_PERRIE
+ * @arg SPDIFRX_IT_OVRIE
+ * @arg SPDIFRX_IT_SBLKIE
+ * @arg SPDIFRX_IT_SYNCDIE
+ * @arg SPDIFRX_IT_IFEIE
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SPDIFRX_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IMR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified SPDIFRX flag is set or not.
+ * @param __HANDLE__: specifies the SPDIFRX Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SPDIFRX_FLAG_RXNE
+ * @arg SPDIFRX_FLAG_CSRNE
+ * @arg SPDIFRX_FLAG_PERR
+ * @arg SPDIFRX_FLAG_OVR
+ * @arg SPDIFRX_FLAG_SBD
+ * @arg SPDIFRX_FLAG_SYNCD
+ * @arg SPDIFRX_FLAG_FERR
+ * @arg SPDIFRX_FLAG_SERR
+ * @arg SPDIFRX_FLAG_TERR
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SPDIFRX_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified SPDIFRX SR flag, in setting the proper IFCR register bit.
+ * @param __HANDLE__: specifies the USART Handle.
+ * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+ * to clear the corresponding interrupt
+ * This parameter can be one of the following values:
+ * @arg SPDIFRX_FLAG_PERR
+ * @arg SPDIFRX_FLAG_OVR
+ * @arg SPDIFRX_SR_SBD
+ * @arg SPDIFRX_SR_SYNCD
+ * @retval None
+ */
+#define __HAL_SPDIFRX_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->IFCR = (uint32_t)(__IT_CLEAR__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SPDIFRX_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup SPDIFRX_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SPDIFRX_Init(SPDIFRX_HandleTypeDef *hspdif);
+HAL_StatusTypeDef HAL_SPDIFRX_DeInit (SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_MspDeInit(SPDIFRX_HandleTypeDef *hspdif);
+HAL_StatusTypeDef HAL_SPDIFRX_SetDataFormat(SPDIFRX_HandleTypeDef *hspdif, SPDIFRX_SetDataFormatTypeDef sDataFormat);
+/**
+ * @}
+ */
+
+/** @addtogroup SPDIFRX_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ***************************************************/
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout);
+
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size);
+void HAL_SPDIFRX_IRQHandler(SPDIFRX_HandleTypeDef *hspdif);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_SPDIFRX_DMAStop(SPDIFRX_HandleTypeDef *hspdif);
+
+/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
+void HAL_SPDIFRX_RxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_RxCpltCallback(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_ErrorCallback(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_CxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif);
+void HAL_SPDIFRX_CxCpltCallback(SPDIFRX_HandleTypeDef *hspdif);
+/**
+ * @}
+ */
+
+/** @addtogroup SPDIFRX_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control and State functions ************************************/
+HAL_SPDIFRX_StateTypeDef HAL_SPDIFRX_GetState(SPDIFRX_HandleTypeDef *hspdif);
+uint32_t HAL_SPDIFRX_GetError(SPDIFRX_HandleTypeDef *hspdif);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup SPDIFRX_Private_Macros SPDIFRX Private Macros
+ * @{
+ */
+#define IS_SPDIFRX_INPUT_SELECT(INPUT) (((INPUT) == SPDIFRX_INPUT_IN1) || \
+ ((INPUT) == SPDIFRX_INPUT_IN2) || \
+ ((INPUT) == SPDIFRX_INPUT_IN3) || \
+ ((INPUT) == SPDIFRX_INPUT_IN0))
+#define IS_SPDIFRX_MAX_RETRIES(RET) (((RET) == SPDIFRX_MAXRETRIES_NONE) || \
+ ((RET) == SPDIFRX_MAXRETRIES_3) || \
+ ((RET) == SPDIFRX_MAXRETRIES_15) || \
+ ((RET) == SPDIFRX_MAXRETRIES_63))
+#define IS_SPDIFRX_WAIT_FOR_ACTIVITY(VAL) (((VAL) == SPDIFRX_WAITFORACTIVITY_ON) || \
+ ((VAL) == SPDIFRX_WAITFORACTIVITY_OFF))
+#define IS_PREAMBLE_TYPE_MASK(VAL) (((VAL) == SPDIFRX_PREAMBLETYPEMASK_ON) || \
+ ((VAL) == SPDIFRX_PREAMBLETYPEMASK_OFF))
+#define IS_VALIDITY_MASK(VAL) (((VAL) == SPDIFRX_VALIDITYMASK_OFF) || \
+ ((VAL) == SPDIFRX_VALIDITYMASK_ON))
+#define IS_PARITY_ERROR_MASK(VAL) (((VAL) == SPDIFRX_PARITYERRORMASK_OFF) || \
+ ((VAL) == SPDIFRX_PARITYERRORMASK_ON))
+#define IS_SPDIFRX_CHANNEL(CHANNEL) (((CHANNEL) == SPDIFRX_CHANNEL_A) || \
+ ((CHANNEL) == SPDIFRX_CHANNEL_B))
+#define IS_SPDIFRX_DATA_FORMAT(FORMAT) (((FORMAT) == SPDIFRX_DATAFORMAT_LSB) || \
+ ((FORMAT) == SPDIFRX_DATAFORMAT_MSB) || \
+ ((FORMAT) == SPDIFRX_DATAFORMAT_32BITS))
+#define IS_STEREO_MODE(MODE) (((MODE) == SPDIFRX_STEREOMODE_DISABLE) || \
+ ((MODE) == SPDIFRX_STEREOMODE_ENABLE))
+
+#define IS_CHANNEL_STATUS_MASK(VAL) (((VAL) == SPDIFRX_CHANNELSTATUS_ON) || \
+ ((VAL) == SPDIFRX_CHANNELSTATUS_OFF))
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SPDIFRX_Private_Functions SPDIFRX Private Functions
+ * @{
+ */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F446xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_SPDIFRX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_spi.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,575 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_spi.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of SPI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SPI_H
+#define __STM32F4xx_HAL_SPI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SPI
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SPI_Exported_Types SPI Exported Types
+ * @{
+ */
+
+/**
+ * @brief SPI Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Specifies the SPI operating mode.
+ This parameter can be a value of @ref SPI_mode */
+
+ uint32_t Direction; /*!< Specifies the SPI Directional mode state.
+ This parameter can be a value of @ref SPI_Direction_mode */
+
+ uint32_t DataSize; /*!< Specifies the SPI data size.
+ This parameter can be a value of @ref SPI_data_size */
+
+ uint32_t CLKPolarity; /*!< Specifies the serial clock steady state.
+ This parameter can be a value of @ref SPI_Clock_Polarity */
+
+ uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture.
+ This parameter can be a value of @ref SPI_Clock_Phase */
+
+ uint32_t NSS; /*!< Specifies whether the NSS signal is managed by
+ hardware (NSS pin) or by software using the SSI bit.
+ This parameter can be a value of @ref SPI_Slave_Select_management */
+
+ uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be
+ used to configure the transmit and receive SCK clock.
+ This parameter can be a value of @ref SPI_BaudRate_Prescaler
+ @note The communication clock is derived from the master
+ clock. The slave clock does not need to be set */
+
+ uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
+ This parameter can be a value of @ref SPI_MSB_LSB_transmission */
+
+ uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not.
+ This parameter can be a value of @ref SPI_TI_mode */
+
+ uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not.
+ This parameter can be a value of @ref SPI_CRC_Calculation */
+
+ uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 65535 */
+
+}SPI_InitTypeDef;
+
+/**
+ * @brief HAL SPI State structure definition
+ */
+typedef enum
+{
+ HAL_SPI_STATE_RESET = 0x00, /*!< SPI not yet initialized or disabled */
+ HAL_SPI_STATE_READY = 0x01, /*!< SPI initialized and ready for use */
+ HAL_SPI_STATE_BUSY = 0x02, /*!< SPI process is ongoing */
+ HAL_SPI_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_SPI_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_SPI_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_SPI_STATE_ERROR = 0x03 /*!< SPI error state */
+
+}HAL_SPI_StateTypeDef;
+
+/**
+ * @brief SPI handle Structure definition
+ */
+typedef struct __SPI_HandleTypeDef
+{
+ SPI_TypeDef *Instance; /* SPI registers base address */
+
+ SPI_InitTypeDef Init; /* SPI communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to SPI Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* SPI Tx transfer size */
+
+ uint16_t TxXferCount; /* SPI Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to SPI Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* SPI Rx transfer size */
+
+ uint16_t RxXferCount; /* SPI Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /* SPI Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* SPI Rx DMA handle parameters */
+
+ void (*RxISR)(struct __SPI_HandleTypeDef * hspi); /* function pointer on Rx ISR */
+
+ void (*TxISR)(struct __SPI_HandleTypeDef * hspi); /* function pointer on Tx ISR */
+
+ HAL_LockTypeDef Lock; /* SPI locking object */
+
+ __IO HAL_SPI_StateTypeDef State; /* SPI communication state */
+
+ __IO uint32_t ErrorCode; /* SPI Error code */
+
+}SPI_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SPI_Exported_Constants SPI Exported Constants
+ * @{
+ */
+
+/** @defgroup SPI_Error_Code SPI Error Code
+ * @brief SPI Error Code
+ * @{
+ */
+#define HAL_SPI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_SPI_ERROR_MODF ((uint32_t)0x00000001) /*!< MODF error */
+#define HAL_SPI_ERROR_CRC ((uint32_t)0x00000002) /*!< CRC error */
+#define HAL_SPI_ERROR_OVR ((uint32_t)0x00000004) /*!< OVR error */
+#define HAL_SPI_ERROR_FRE ((uint32_t)0x00000008) /*!< FRE error */
+#define HAL_SPI_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+#define HAL_SPI_ERROR_FLAG ((uint32_t)0x00000010) /*!< Flag: RXNE,TXE, BSY */
+/**
+ * @}
+ */
+
+/** @defgroup SPI_mode SPI Mode
+ * @{
+ */
+#define SPI_MODE_SLAVE ((uint32_t)0x00000000)
+#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI)
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Direction_mode SPI Direction Mode
+ * @{
+ */
+#define SPI_DIRECTION_2LINES ((uint32_t)0x00000000)
+#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY
+#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE
+/**
+ * @}
+ */
+
+/** @defgroup SPI_data_size SPI Data Size
+ * @{
+ */
+#define SPI_DATASIZE_8BIT ((uint32_t)0x00000000)
+#define SPI_DATASIZE_16BIT SPI_CR1_DFF
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Polarity SPI Clock Polarity
+ * @{
+ */
+#define SPI_POLARITY_LOW ((uint32_t)0x00000000)
+#define SPI_POLARITY_HIGH SPI_CR1_CPOL
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Phase SPI Clock Phase
+ * @{
+ */
+#define SPI_PHASE_1EDGE ((uint32_t)0x00000000)
+#define SPI_PHASE_2EDGE SPI_CR1_CPHA
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Slave_Select_management SPI Slave Select Management
+ * @{
+ */
+#define SPI_NSS_SOFT SPI_CR1_SSM
+#define SPI_NSS_HARD_INPUT ((uint32_t)0x00000000)
+#define SPI_NSS_HARD_OUTPUT ((uint32_t)0x00040000)
+/**
+ * @}
+ */
+
+/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler
+ * @{
+ */
+#define SPI_BAUDRATEPRESCALER_2 ((uint32_t)0x00000000)
+#define SPI_BAUDRATEPRESCALER_4 ((uint32_t)0x00000008)
+#define SPI_BAUDRATEPRESCALER_8 ((uint32_t)0x00000010)
+#define SPI_BAUDRATEPRESCALER_16 ((uint32_t)0x00000018)
+#define SPI_BAUDRATEPRESCALER_32 ((uint32_t)0x00000020)
+#define SPI_BAUDRATEPRESCALER_64 ((uint32_t)0x00000028)
+#define SPI_BAUDRATEPRESCALER_128 ((uint32_t)0x00000030)
+#define SPI_BAUDRATEPRESCALER_256 ((uint32_t)0x00000038)
+/**
+ * @}
+ */
+
+/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB Transsmission
+ * @{
+ */
+#define SPI_FIRSTBIT_MSB ((uint32_t)0x00000000)
+#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST
+/**
+ * @}
+ */
+
+/** @defgroup SPI_TI_mode SPI TI Mode
+ * @{
+ */
+#define SPI_TIMODE_DISABLE ((uint32_t)0x00000000)
+#define SPI_TIMODE_ENABLE SPI_CR2_FRF
+/**
+ * @}
+ */
+
+/** @defgroup SPI_CRC_Calculation SPI CRC Calculation
+ * @{
+ */
+#define SPI_CRCCALCULATION_DISABLE ((uint32_t)0x00000000)
+#define SPI_CRCCALCULATION_ENABLE SPI_CR1_CRCEN
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Interrupt_definition SPI Interrupt Definition
+ * @{
+ */
+#define SPI_IT_TXE SPI_CR2_TXEIE
+#define SPI_IT_RXNE SPI_CR2_RXNEIE
+#define SPI_IT_ERR SPI_CR2_ERRIE
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Flags_definition SPI Flags Definition
+ * @{
+ */
+#define SPI_FLAG_RXNE SPI_SR_RXNE
+#define SPI_FLAG_TXE SPI_SR_TXE
+#define SPI_FLAG_CRCERR SPI_SR_CRCERR
+#define SPI_FLAG_MODF SPI_SR_MODF
+#define SPI_FLAG_OVR SPI_SR_OVR
+#define SPI_FLAG_BSY SPI_SR_BSY
+#define SPI_FLAG_FRE SPI_SR_FRE
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SPI_Exported_Macros SPI Exported Macros
+ * @{
+ */
+/** @brief Reset SPI handle state
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
+
+/** @brief Enable or disable the specified SPI interrupts.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__)))
+
+/** @brief Check if the specified SPI interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __INTERRUPT__: specifies the SPI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Check whether the specified SPI flag is set or not.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_FLAG_RXNE: Receive buffer not empty flag
+ * @arg SPI_FLAG_TXE: Transmit buffer empty flag
+ * @arg SPI_FLAG_CRCERR: CRC error flag
+ * @arg SPI_FLAG_MODF: Mode fault flag
+ * @arg SPI_FLAG_OVR: Overrun flag
+ * @arg SPI_FLAG_BSY: Busy flag
+ * @arg SPI_FLAG_FRE: Frame format error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the SPI CRCERR pending flag.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = ~(SPI_FLAG_CRCERR))
+
+/** @brief Clear the SPI MODF pending flag.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ (__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE); \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Clear the SPI OVR pending flag.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg; \
+ tmpreg = (__HANDLE__)->Instance->DR; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Clear the SPI FRE pending flag.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg); \
+ }while(0)
+
+/** @brief Enable SPI
+ * @param __HANDLE__: specifies the SPI Handle.
+ * @retval None
+ */
+#define __HAL_SPI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_SPE)
+
+/** @brief Disable SPI
+ * @param __HANDLE__: specifies the SPI Handle.
+ * @retval None
+ */
+#define __HAL_SPI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~SPI_CR1_SPE)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SPI_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup SPI_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DeInit (SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi);
+/**
+ * @}
+ */
+
+/** @addtogroup SPI_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions *****************************************************/
+HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi);
+
+void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+/**
+ * @}
+ */
+
+/** @addtogroup SPI_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State and Control functions **************************************/
+HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi);
+uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup SPI_Private_Constants SPI Private Constants
+ * @{
+ */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup SPI_Private_Macros SPI Private Macros
+ * @{
+ */
+
+#define IS_SPI_MODE(MODE) (((MODE) == SPI_MODE_SLAVE) || \
+ ((MODE) == SPI_MODE_MASTER))
+
+
+#define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \
+ ((MODE) == SPI_DIRECTION_2LINES_RXONLY) || \
+ ((MODE) == SPI_DIRECTION_1LINE))
+
+#define IS_SPI_DIRECTION_2LINES_OR_1LINE(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \
+ ((MODE) == SPI_DIRECTION_1LINE))
+
+#define IS_SPI_DIRECTION_2LINES(MODE) ((MODE) == SPI_DIRECTION_2LINES)
+
+#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DATASIZE_16BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_8BIT))
+
+#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_POLARITY_LOW) || \
+ ((CPOL) == SPI_POLARITY_HIGH))
+
+#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_PHASE_1EDGE) || \
+ ((CPHA) == SPI_PHASE_2EDGE))
+
+#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_SOFT) || \
+ ((NSS) == SPI_NSS_HARD_INPUT) || \
+ ((NSS) == SPI_NSS_HARD_OUTPUT))
+
+#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BAUDRATEPRESCALER_2) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_4) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_8) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_16) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_32) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_64) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_128) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_256))
+
+#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FIRSTBIT_MSB) || \
+ ((BIT) == SPI_FIRSTBIT_LSB))
+
+#define IS_SPI_TIMODE(MODE) (((MODE) == SPI_TIMODE_DISABLE) || \
+ ((MODE) == SPI_TIMODE_ENABLE))
+
+#define IS_SPI_CRC_CALCULATION(CALCULATION) (((CALCULATION) == SPI_CRCCALCULATION_DISABLE) || \
+ ((CALCULATION) == SPI_CRCCALCULATION_ENABLE))
+
+#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) (((POLYNOMIAL) >= 0x1) && ((POLYNOMIAL) <= 0xFFFF))
+
+#define SPI_1LINE_TX(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_BIDIOE)
+
+#define SPI_1LINE_RX(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~SPI_CR1_BIDIOE)
+
+#define SPI_RESET_CRC(__HANDLE__) do{(__HANDLE__)->Instance->CR1 &= (~SPI_CR1_CRCEN);\
+ (__HANDLE__)->Instance->CR1 |= SPI_CR1_CRCEN;}while(0)
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SPI_Private_Functions SPI Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SPI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_sram.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,202 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sram.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of SRAM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SRAM_H
+#define __STM32F4xx_HAL_SRAM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+ #include "stm32f4xx_ll_fsmc.h"
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F446xx)
+ #include "stm32f4xx_ll_fmc.h"
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F446xx)
+/** @addtogroup SRAM
+ * @{
+ */
+
+/* Exported typedef ----------------------------------------------------------*/
+
+/** @defgroup SRAM_Exported_Types SRAM Exported Types
+ * @{
+ */
+/**
+ * @brief HAL SRAM State structures definition
+ */
+typedef enum
+{
+ HAL_SRAM_STATE_RESET = 0x00, /*!< SRAM not yet initialized or disabled */
+ HAL_SRAM_STATE_READY = 0x01, /*!< SRAM initialized and ready for use */
+ HAL_SRAM_STATE_BUSY = 0x02, /*!< SRAM internal process is ongoing */
+ HAL_SRAM_STATE_ERROR = 0x03, /*!< SRAM error state */
+ HAL_SRAM_STATE_PROTECTED = 0x04 /*!< SRAM peripheral NORSRAM device write protected */
+
+}HAL_SRAM_StateTypeDef;
+
+/**
+ * @brief SRAM handle Structure definition
+ */
+typedef struct
+{
+ FMC_NORSRAM_TypeDef *Instance; /*!< Register base address */
+
+ FMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */
+
+ FMC_NORSRAM_InitTypeDef Init; /*!< SRAM device control configuration parameters */
+
+ HAL_LockTypeDef Lock; /*!< SRAM locking object */
+
+ __IO HAL_SRAM_StateTypeDef State; /*!< SRAM device access state */
+
+ DMA_HandleTypeDef *hdma; /*!< Pointer DMA handler */
+
+}SRAM_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup SRAM_Exported_Macros SRAM Exported Macros
+ * @{
+ */
+/** @brief Reset SRAM handle state
+ * @param __HANDLE__: SRAM handle
+ * @retval None
+ */
+#define __HAL_SRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SRAM_STATE_RESET)
+
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup SRAM_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup SRAM_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming);
+HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram);
+void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram);
+void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram);
+
+void HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/** @addtogroup SRAM_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions *****************************************************/
+HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+/**
+ * @}
+ */
+
+/** @addtogroup SRAM_Exported_Functions_Group3
+ * @{
+ */
+/* SRAM Control functions ******************************************************/
+HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram);
+HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram);
+/**
+ * @}
+ */
+
+/** @addtogroup SRAM_Exported_Functions_Group4
+ * @{
+ */
+/* SRAM State functions *********************************************************/
+HAL_SRAM_StateTypeDef HAL_SRAM_GetState(SRAM_HandleTypeDef *hsram);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/**
+ * @}
+ */
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SRAM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_tim.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,1608 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_tim.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of TIM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_TIM_H
+#define __STM32F4xx_HAL_TIM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TIM
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIM_Exported_Types TIM Exported Types
+ * @{
+ */
+
+/**
+ * @brief TIM Time base Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t CounterMode; /*!< Specifies the counter mode.
+ This parameter can be a value of @ref TIM_Counter_Mode */
+
+ uint32_t Period; /*!< Specifies the period value to be loaded into the active
+ Auto-Reload Register at the next update event.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t ClockDivision; /*!< Specifies the clock division.
+ This parameter can be a value of @ref TIM_ClockDivision */
+
+ uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter
+ reaches zero, an update event is generated and counting restarts
+ from the RCR value (N).
+ This means in PWM mode that (N+1) corresponds to:
+ - the number of PWM periods in edge-aligned mode
+ - the number of half PWM period in center-aligned mode
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_Base_InitTypeDef;
+
+/**
+ * @brief TIM Output Compare Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCFastMode; /*!< Specifies the Fast mode state.
+ This parameter can be a value of @ref TIM_Output_Fast_State
+ @note This parameter is valid only in PWM1 and PWM2 mode. */
+
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_OC_InitTypeDef;
+
+/**
+ * @brief TIM One Pulse Mode Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_OnePulse_InitTypeDef;
+
+
+/**
+ * @brief TIM Input Capture Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_IC_InitTypeDef;
+
+/**
+ * @brief TIM Encoder Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t EncoderMode; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Encoder_Mode */
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+ uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC2Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC2Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_Encoder_InitTypeDef;
+
+/**
+ * @brief Clock Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockSource; /*!< TIM clock sources.
+ This parameter can be a value of @ref TIM_Clock_Source */
+ uint32_t ClockPolarity; /*!< TIM clock polarity.
+ This parameter can be a value of @ref TIM_Clock_Polarity */
+ uint32_t ClockPrescaler; /*!< TIM clock prescaler.
+ This parameter can be a value of @ref TIM_Clock_Prescaler */
+ uint32_t ClockFilter; /*!< TIM clock filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+}TIM_ClockConfigTypeDef;
+
+/**
+ * @brief Clear Input Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClearInputState; /*!< TIM clear Input state.
+ This parameter can be ENABLE or DISABLE */
+ uint32_t ClearInputSource; /*!< TIM clear Input sources.
+ This parameter can be a value of @ref TIM_ClearInput_Source */
+ uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity.
+ This parameter can be a value of @ref TIM_ClearInput_Polarity */
+ uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler.
+ This parameter can be a value of @ref TIM_ClearInput_Prescaler */
+ uint32_t ClearInputFilter; /*!< TIM Clear Input filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+}TIM_ClearInputConfigTypeDef;
+
+/**
+ * @brief TIM Slave configuration Structure definition
+ */
+typedef struct {
+ uint32_t SlaveMode; /*!< Slave mode selection
+ This parameter can be a value of @ref TIM_Slave_Mode */
+ uint32_t InputTrigger; /*!< Input Trigger source
+ This parameter can be a value of @ref TIM_Trigger_Selection */
+ uint32_t TriggerPolarity; /*!< Input Trigger polarity
+ This parameter can be a value of @ref TIM_Trigger_Polarity */
+ uint32_t TriggerPrescaler; /*!< Input trigger prescaler
+ This parameter can be a value of @ref TIM_Trigger_Prescaler */
+ uint32_t TriggerFilter; /*!< Input trigger filter
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+}TIM_SlaveConfigTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_TIM_STATE_RESET = 0x00, /*!< Peripheral not yet initialized or disabled */
+ HAL_TIM_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_TIM_STATE_BUSY = 0x02, /*!< An internal process is ongoing */
+ HAL_TIM_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_TIM_STATE_ERROR = 0x04 /*!< Reception process is ongoing */
+}HAL_TIM_StateTypeDef;
+
+/**
+ * @brief HAL Active channel structures definition
+ */
+typedef enum
+{
+ HAL_TIM_ACTIVE_CHANNEL_1 = 0x01, /*!< The active channel is 1 */
+ HAL_TIM_ACTIVE_CHANNEL_2 = 0x02, /*!< The active channel is 2 */
+ HAL_TIM_ACTIVE_CHANNEL_3 = 0x04, /*!< The active channel is 3 */
+ HAL_TIM_ACTIVE_CHANNEL_4 = 0x08, /*!< The active channel is 4 */
+ HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00 /*!< All active channels cleared */
+}HAL_TIM_ActiveChannel;
+
+/**
+ * @brief TIM Time Base Handle Structure definition
+ */
+typedef struct
+{
+ TIM_TypeDef *Instance; /*!< Register base address */
+ TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */
+ HAL_TIM_ActiveChannel Channel; /*!< Active channel */
+ DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array
+ This array is accessed by a @ref DMA_Handle_index */
+ HAL_LockTypeDef Lock; /*!< Locking object */
+ __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */
+}TIM_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIM_Exported_Constants TIM Exported Constants
+ * @{
+ */
+
+/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel Polarity
+ * @{
+ */
+#define TIM_INPUTCHANNELPOLARITY_RISING ((uint32_t)0x00000000) /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_FALLING (TIM_CCER_CC1P) /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Polarity TIM ETR Polarity
+ * @{
+ */
+#define TIM_ETRPOLARITY_INVERTED (TIM_SMCR_ETP) /*!< Polarity for ETR source */
+#define TIM_ETRPOLARITY_NONINVERTED ((uint32_t)0x0000) /*!< Polarity for ETR source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler
+ * @{
+ */
+#define TIM_ETRPRESCALER_DIV1 ((uint32_t)0x0000) /*!< No prescaler is used */
+#define TIM_ETRPRESCALER_DIV2 (TIM_SMCR_ETPS_0) /*!< ETR input source is divided by 2 */
+#define TIM_ETRPRESCALER_DIV4 (TIM_SMCR_ETPS_1) /*!< ETR input source is divided by 4 */
+#define TIM_ETRPRESCALER_DIV8 (TIM_SMCR_ETPS) /*!< ETR input source is divided by 8 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Counter_Mode TIM Counter Mode
+ * @{
+ */
+#define TIM_COUNTERMODE_UP ((uint32_t)0x0000)
+#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR
+#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0
+#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1
+#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClockDivision TIM Clock Division
+ * @{
+ */
+#define TIM_CLOCKDIVISION_DIV1 ((uint32_t)0x0000)
+#define TIM_CLOCKDIVISION_DIV2 (TIM_CR1_CKD_0)
+#define TIM_CLOCKDIVISION_DIV4 (TIM_CR1_CKD_1)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM modes
+ * @{
+ */
+#define TIM_OCMODE_TIMING ((uint32_t)0x0000)
+#define TIM_OCMODE_ACTIVE (TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_INACTIVE (TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M)
+#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_FORCED_INACTIVE (TIM_CCMR1_OC1M_2)
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Fast_State TIM Output Fast State
+ * @{
+ */
+#define TIM_OCFAST_DISABLE ((uint32_t)0x0000)
+#define TIM_OCFAST_ENABLE (TIM_CCMR1_OC1FE)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity
+ * @{
+ */
+#define TIM_OCPOLARITY_HIGH ((uint32_t)0x0000)
+#define TIM_OCPOLARITY_LOW (TIM_CCER_CC1P)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Polarity TIM Output CompareN Polarity
+ * @{
+ */
+#define TIM_OCNPOLARITY_HIGH ((uint32_t)0x0000)
+#define TIM_OCNPOLARITY_LOW (TIM_CCER_CC1NP)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State
+ * @{
+ */
+#define TIM_OCIDLESTATE_SET (TIM_CR2_OIS1)
+#define TIM_OCIDLESTATE_RESET ((uint32_t)0x0000)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Idle_State TIM Output Compare N Idle State
+ * @{
+ */
+#define TIM_OCNIDLESTATE_SET (TIM_CR2_OIS1N)
+#define TIM_OCNIDLESTATE_RESET ((uint32_t)0x0000)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Channel TIM Channel
+ * @{
+ */
+#define TIM_CHANNEL_1 ((uint32_t)0x0000)
+#define TIM_CHANNEL_2 ((uint32_t)0x0004)
+#define TIM_CHANNEL_3 ((uint32_t)0x0008)
+#define TIM_CHANNEL_4 ((uint32_t)0x000C)
+#define TIM_CHANNEL_ALL ((uint32_t)0x0018)
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity
+ * @{
+ */
+#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING
+#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING
+#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection
+ * @{
+ */
+#define TIM_ICSELECTION_DIRECTTI (TIM_CCMR1_CC1S_0) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC1, IC2, IC3 or IC4, respectively */
+#define TIM_ICSELECTION_INDIRECTTI (TIM_CCMR1_CC1S_1) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC2, IC1, IC4 or IC3, respectively */
+#define TIM_ICSELECTION_TRC (TIM_CCMR1_CC1S) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler
+ * @{
+ */
+#define TIM_ICPSC_DIV1 ((uint32_t)0x0000) /*!< Capture performed each time an edge is detected on the capture input */
+#define TIM_ICPSC_DIV2 (TIM_CCMR1_IC1PSC_0) /*!< Capture performed once every 2 events */
+#define TIM_ICPSC_DIV4 (TIM_CCMR1_IC1PSC_1) /*!< Capture performed once every 4 events */
+#define TIM_ICPSC_DIV8 (TIM_CCMR1_IC1PSC) /*!< Capture performed once every 8 events */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode
+ * @{
+ */
+#define TIM_OPMODE_SINGLE (TIM_CR1_OPM)
+#define TIM_OPMODE_REPETITIVE ((uint32_t)0x0000)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Encoder_Mode TIM Encoder Mode
+ * @{
+ */
+#define TIM_ENCODERMODE_TI1 (TIM_SMCR_SMS_0)
+#define TIM_ENCODERMODE_TI2 (TIM_SMCR_SMS_1)
+#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0)
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Interrupt_definition TIM Interrupt definition
+ * @{
+ */
+#define TIM_IT_UPDATE (TIM_DIER_UIE)
+#define TIM_IT_CC1 (TIM_DIER_CC1IE)
+#define TIM_IT_CC2 (TIM_DIER_CC2IE)
+#define TIM_IT_CC3 (TIM_DIER_CC3IE)
+#define TIM_IT_CC4 (TIM_DIER_CC4IE)
+#define TIM_IT_COM (TIM_DIER_COMIE)
+#define TIM_IT_TRIGGER (TIM_DIER_TIE)
+#define TIM_IT_BREAK (TIM_DIER_BIE)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Commutation_Source TIM Commutation Source
+ * @{
+ */
+#define TIM_COMMUTATION_TRGI (TIM_CR2_CCUS)
+#define TIM_COMMUTATION_SOFTWARE ((uint32_t)0x0000)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_sources TIM DMA sources
+ * @{
+ */
+#define TIM_DMA_UPDATE (TIM_DIER_UDE)
+#define TIM_DMA_CC1 (TIM_DIER_CC1DE)
+#define TIM_DMA_CC2 (TIM_DIER_CC2DE)
+#define TIM_DMA_CC3 (TIM_DIER_CC3DE)
+#define TIM_DMA_CC4 (TIM_DIER_CC4DE)
+#define TIM_DMA_COM (TIM_DIER_COMDE)
+#define TIM_DMA_TRIGGER (TIM_DIER_TDE)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Event_Source TIM Event Source
+ * @{
+ */
+#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG
+#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G
+#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G
+#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G
+#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G
+#define TIM_EVENTSOURCE_COM TIM_EGR_COMG
+#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG
+#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Flag_definition TIM Flag definition
+ * @{
+ */
+#define TIM_FLAG_UPDATE (TIM_SR_UIF)
+#define TIM_FLAG_CC1 (TIM_SR_CC1IF)
+#define TIM_FLAG_CC2 (TIM_SR_CC2IF)
+#define TIM_FLAG_CC3 (TIM_SR_CC3IF)
+#define TIM_FLAG_CC4 (TIM_SR_CC4IF)
+#define TIM_FLAG_COM (TIM_SR_COMIF)
+#define TIM_FLAG_TRIGGER (TIM_SR_TIF)
+#define TIM_FLAG_BREAK (TIM_SR_BIF)
+#define TIM_FLAG_CC1OF (TIM_SR_CC1OF)
+#define TIM_FLAG_CC2OF (TIM_SR_CC2OF)
+#define TIM_FLAG_CC3OF (TIM_SR_CC3OF)
+#define TIM_FLAG_CC4OF (TIM_SR_CC4OF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Source TIM Clock Source
+ * @{
+ */
+#define TIM_CLOCKSOURCE_ETRMODE2 (TIM_SMCR_ETPS_1)
+#define TIM_CLOCKSOURCE_INTERNAL (TIM_SMCR_ETPS_0)
+#define TIM_CLOCKSOURCE_ITR0 ((uint32_t)0x0000)
+#define TIM_CLOCKSOURCE_ITR1 (TIM_SMCR_TS_0)
+#define TIM_CLOCKSOURCE_ITR2 (TIM_SMCR_TS_1)
+#define TIM_CLOCKSOURCE_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1)
+#define TIM_CLOCKSOURCE_TI1ED (TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_TI1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_TI2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_ETRMODE1 (TIM_SMCR_TS)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Polarity TIM Clock Polarity
+ * @{
+ */
+#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler
+ * @{
+ */
+#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */
+#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */
+#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Source TIM Clear Input Source
+ * @{
+ */
+#define TIM_CLEARINPUTSOURCE_ETR ((uint32_t)0x0001)
+#define TIM_CLEARINPUTSOURCE_NONE ((uint32_t)0x0000)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity
+ * @{
+ */
+#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */
+#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler
+ * @{
+ */
+#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state
+ * @{
+ */
+#define TIM_OSSR_ENABLE (TIM_BDTR_OSSR)
+#define TIM_OSSR_DISABLE ((uint32_t)0x0000)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state
+ * @{
+ */
+#define TIM_OSSI_ENABLE (TIM_BDTR_OSSI)
+#define TIM_OSSI_DISABLE ((uint32_t)0x0000)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Lock_level TIM Lock level
+ * @{
+ */
+#define TIM_LOCKLEVEL_OFF ((uint32_t)0x0000)
+#define TIM_LOCKLEVEL_1 (TIM_BDTR_LOCK_0)
+#define TIM_LOCKLEVEL_2 (TIM_BDTR_LOCK_1)
+#define TIM_LOCKLEVEL_3 (TIM_BDTR_LOCK)
+/**
+ * @}
+ */
+/** @defgroup TIM_Break_Input_enable_disable TIM Break Input State
+ * @{
+ */
+#define TIM_BREAK_ENABLE (TIM_BDTR_BKE)
+#define TIM_BREAK_DISABLE ((uint32_t)0x0000)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Break_Polarity TIM Break Polarity
+ * @{
+ */
+#define TIM_BREAKPOLARITY_LOW ((uint32_t)0x0000)
+#define TIM_BREAKPOLARITY_HIGH (TIM_BDTR_BKP)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_AOE_Bit_Set_Reset TIM AOE Bit State
+ * @{
+ */
+#define TIM_AUTOMATICOUTPUT_ENABLE (TIM_BDTR_AOE)
+#define TIM_AUTOMATICOUTPUT_DISABLE ((uint32_t)0x0000)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection
+ * @{
+ */
+#define TIM_TRGO_RESET ((uint32_t)0x0000)
+#define TIM_TRGO_ENABLE (TIM_CR2_MMS_0)
+#define TIM_TRGO_UPDATE (TIM_CR2_MMS_1)
+#define TIM_TRGO_OC1 ((TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+#define TIM_TRGO_OC1REF (TIM_CR2_MMS_2)
+#define TIM_TRGO_OC2REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_0))
+#define TIM_TRGO_OC3REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1))
+#define TIM_TRGO_OC4REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Slave_Mode TIM Slave Mode
+ * @{
+ */
+#define TIM_SLAVEMODE_DISABLE ((uint32_t)0x0000)
+#define TIM_SLAVEMODE_RESET ((uint32_t)0x0004)
+#define TIM_SLAVEMODE_GATED ((uint32_t)0x0005)
+#define TIM_SLAVEMODE_TRIGGER ((uint32_t)0x0006)
+#define TIM_SLAVEMODE_EXTERNAL1 ((uint32_t)0x0007)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Slave_Mode TIM Master Slave Mode
+ * @{
+ */
+#define TIM_MASTERSLAVEMODE_ENABLE ((uint32_t)0x0080)
+#define TIM_MASTERSLAVEMODE_DISABLE ((uint32_t)0x0000)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Selection TIM Trigger Selection
+ * @{
+ */
+#define TIM_TS_ITR0 ((uint32_t)0x0000)
+#define TIM_TS_ITR1 ((uint32_t)0x0010)
+#define TIM_TS_ITR2 ((uint32_t)0x0020)
+#define TIM_TS_ITR3 ((uint32_t)0x0030)
+#define TIM_TS_TI1F_ED ((uint32_t)0x0040)
+#define TIM_TS_TI1FP1 ((uint32_t)0x0050)
+#define TIM_TS_TI2FP2 ((uint32_t)0x0060)
+#define TIM_TS_ETRF ((uint32_t)0x0070)
+#define TIM_TS_NONE ((uint32_t)0xFFFF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity
+ * @{
+ */
+#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler
+ * @{
+ */
+#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */
+#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */
+#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */
+/**
+ * @}
+ */
+
+
+/** @defgroup TIM_TI1_Selection TIM TI1 Selection
+ * @{
+ */
+#define TIM_TI1SELECTION_CH1 ((uint32_t)0x0000)
+#define TIM_TI1SELECTION_XORCOMBINATION (TIM_CR2_TI1S)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Base_address TIM DMA Base address
+ * @{
+ */
+#define TIM_DMABASE_CR1 (0x00000000)
+#define TIM_DMABASE_CR2 (0x00000001)
+#define TIM_DMABASE_SMCR (0x00000002)
+#define TIM_DMABASE_DIER (0x00000003)
+#define TIM_DMABASE_SR (0x00000004)
+#define TIM_DMABASE_EGR (0x00000005)
+#define TIM_DMABASE_CCMR1 (0x00000006)
+#define TIM_DMABASE_CCMR2 (0x00000007)
+#define TIM_DMABASE_CCER (0x00000008)
+#define TIM_DMABASE_CNT (0x00000009)
+#define TIM_DMABASE_PSC (0x0000000A)
+#define TIM_DMABASE_ARR (0x0000000B)
+#define TIM_DMABASE_RCR (0x0000000C)
+#define TIM_DMABASE_CCR1 (0x0000000D)
+#define TIM_DMABASE_CCR2 (0x0000000E)
+#define TIM_DMABASE_CCR3 (0x0000000F)
+#define TIM_DMABASE_CCR4 (0x00000010)
+#define TIM_DMABASE_BDTR (0x00000011)
+#define TIM_DMABASE_DCR (0x00000012)
+#define TIM_DMABASE_OR (0x00000013)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length
+ * @{
+ */
+#define TIM_DMABURSTLENGTH_1TRANSFER (0x00000000)
+#define TIM_DMABURSTLENGTH_2TRANSFERS (0x00000100)
+#define TIM_DMABURSTLENGTH_3TRANSFERS (0x00000200)
+#define TIM_DMABURSTLENGTH_4TRANSFERS (0x00000300)
+#define TIM_DMABURSTLENGTH_5TRANSFERS (0x00000400)
+#define TIM_DMABURSTLENGTH_6TRANSFERS (0x00000500)
+#define TIM_DMABURSTLENGTH_7TRANSFERS (0x00000600)
+#define TIM_DMABURSTLENGTH_8TRANSFERS (0x00000700)
+#define TIM_DMABURSTLENGTH_9TRANSFERS (0x00000800)
+#define TIM_DMABURSTLENGTH_10TRANSFERS (0x00000900)
+#define TIM_DMABURSTLENGTH_11TRANSFERS (0x00000A00)
+#define TIM_DMABURSTLENGTH_12TRANSFERS (0x00000B00)
+#define TIM_DMABURSTLENGTH_13TRANSFERS (0x00000C00)
+#define TIM_DMABURSTLENGTH_14TRANSFERS (0x00000D00)
+#define TIM_DMABURSTLENGTH_15TRANSFERS (0x00000E00)
+#define TIM_DMABURSTLENGTH_16TRANSFERS (0x00000F00)
+#define TIM_DMABURSTLENGTH_17TRANSFERS (0x00001000)
+#define TIM_DMABURSTLENGTH_18TRANSFERS (0x00001100)
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Handle_index DMA Handle index
+ * @{
+ */
+#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0) /*!< Index of the DMA handle used for Update DMA requests */
+#define TIM_DMA_ID_CC1 ((uint16_t) 0x1) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */
+#define TIM_DMA_ID_CC2 ((uint16_t) 0x2) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */
+#define TIM_DMA_ID_CC3 ((uint16_t) 0x3) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */
+#define TIM_DMA_ID_CC4 ((uint16_t) 0x4) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */
+#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x5) /*!< Index of the DMA handle used for Commutation DMA requests */
+#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x6) /*!< Index of the DMA handle used for Trigger DMA requests */
+/**
+ * @}
+ */
+
+/** @defgroup Channel_CC_State Channel CC State
+ * @{
+ */
+#define TIM_CCx_ENABLE ((uint32_t)0x0001)
+#define TIM_CCx_DISABLE ((uint32_t)0x0000)
+#define TIM_CCxN_ENABLE ((uint32_t)0x0004)
+#define TIM_CCxN_DISABLE ((uint32_t)0x0000)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup TIM_Exported_Macros TIM Exported Macros
+ * @{
+ */
+/** @brief Reset TIM handle state
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TIM_STATE_RESET)
+
+/**
+ * @brief Enable the TIM peripheral.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN))
+
+/**
+ * @brief Enable the TIM main Output.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE))
+
+
+/**
+ * @brief Disable the TIM peripheral.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0) \
+ { \
+ (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \
+ } \
+ } \
+ } while(0)
+
+/* The Main Output of a timer instance is disabled only if all the CCx and CCxN
+ channels have been disabled */
+/**
+ * @brief Disable the TIM main Output.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0) \
+ { \
+ (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \
+ } \
+ } \
+ } while(0)
+
+#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__))
+#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__))
+#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__))
+#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__))
+#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__))
+#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
+
+#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR))
+#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__))
+
+#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\
+ ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8)))
+
+#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC2PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC3PSC) :\
+ ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC4PSC))
+
+#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8)) :\
+ ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12) & TIM_CCER_CC4P)))
+
+#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\
+ ((__HANDLE__)->Instance->CCER &= (uint16_t)~TIM_CCER_CC4P))
+
+/**
+ * @brief Sets the TIM Capture Compare Register value on runtime without
+ * calling another time ConfigChannel function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __COMPARE__: specifies the Capture Compare register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \
+(*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2)) = (__COMPARE__))
+
+/**
+ * @brief Gets the TIM Capture Compare Register value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channel associated with the capture compare register
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get capture/compare 1 register value
+ * @arg TIM_CHANNEL_2: get capture/compare 2 register value
+ * @arg TIM_CHANNEL_3: get capture/compare 3 register value
+ * @arg TIM_CHANNEL_4: get capture/compare 4 register value
+ * @retval None
+ */
+#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \
+ (*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2)))
+
+/**
+ * @brief Sets the TIM Counter Register value on runtime.
+ * @param __HANDLE__: TIM handle.
+ * @param __COUNTER__: specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__))
+
+/**
+ * @brief Gets the TIM Counter Register value on runtime.
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT)
+
+/**
+ * @brief Sets the TIM Autoreload Register value on runtime without calling
+ * another time any Init function.
+ * @param __HANDLE__: TIM handle.
+ * @param __AUTORELOAD__: specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \
+ do{ \
+ (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \
+ (__HANDLE__)->Init.Period = (__AUTORELOAD__); \
+ } while(0)
+/**
+ * @brief Gets the TIM Autoreload Register value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR)
+
+/**
+ * @brief Sets the TIM Clock Division value on runtime without calling
+ * another time any Init function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CKD__: specifies the clock division value.
+ * This parameter can be one of the following value:
+ * @arg TIM_CLOCKDIVISION_DIV1
+ * @arg TIM_CLOCKDIVISION_DIV2
+ * @arg TIM_CLOCKDIVISION_DIV4
+ * @retval None
+ */
+#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \
+ do{ \
+ (__HANDLE__)->Instance->CR1 &= (uint16_t)(~TIM_CR1_CKD); \
+ (__HANDLE__)->Instance->CR1 |= (__CKD__); \
+ (__HANDLE__)->Init.ClockDivision = (__CKD__); \
+ } while(0)
+/**
+ * @brief Gets the TIM Clock Division value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
+
+/**
+ * @brief Sets the TIM Input Capture prescaler on runtime without calling
+ * another time HAL_TIM_IC_ConfigChannel() function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __ICPSC__: specifies the Input Capture4 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \
+ do{ \
+ TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \
+ TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \
+ } while(0)
+
+/**
+ * @brief Gets the TIM Input Capture prescaler on runtime
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get input capture 1 prescaler value
+ * @arg TIM_CHANNEL_2: get input capture 2 prescaler value
+ * @arg TIM_CHANNEL_3: get input capture 3 prescaler value
+ * @arg TIM_CHANNEL_4: get input capture 4 prescaler value
+ * @retval None
+ */
+#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\
+ (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8)
+
+/**
+ * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register
+ * @param __HANDLE__: TIM handle.
+ * @note When the USR bit of the TIMx_CR1 register is set, only counter
+ * overflow/underflow generates an update interrupt or DMA request (if
+ * enabled)
+ * @retval None
+ */
+#define __HAL_TIM_URS_ENABLE(__HANDLE__) \
+ ((__HANDLE__)->Instance->CR1|= (TIM_CR1_URS))
+
+/**
+ * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register
+ * @param __HANDLE__: TIM handle.
+ * @note When the USR bit of the TIMx_CR1 register is reset, any of the
+ * following events generate an update interrupt or DMA request (if
+ * enabled):
+ * Counter overflow/underflow
+ * Setting the UG bit
+ * Update generation through the slave mode controller
+ * @retval None
+ */
+#define __HAL_TIM_URS_DISABLE(__HANDLE__) \
+ ((__HANDLE__)->Instance->CR1&=~(TIM_CR1_URS))
+
+/**
+ * @brief Sets the TIM Capture x input polarity on runtime.
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__: TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __POLARITY__: Polarity for TIx source
+ * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge
+ * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge
+ * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge
+ * @note The polarity TIM_INPUTCHANNELPOLARITY_BOTHEDGE is not authorized for TIM Channel 4.
+ * @retval None
+ */
+#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \
+ do{ \
+ TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \
+ TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \
+ }while(0)
+/**
+ * @}
+ */
+
+/* Include TIM HAL Extension module */
+#include "stm32f4xx_hal_tim_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIM_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group1
+ * @{
+ */
+
+/* Time Base functions ********************************************************/
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group2
+ * @{
+ */
+/* Timer Output Compare functions **********************************************/
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group3
+ * @{
+ */
+/* Timer PWM functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group4
+ * @{
+ */
+/* Timer Input Capture functions ***********************************************/
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group5
+ * @{
+ */
+/* Timer One Pulse functions ***************************************************/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode);
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group6
+ * @{
+ */
+/* Timer Encoder functions *****************************************************/
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim);
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group7
+ * @{
+ */
+/* Interrupt Handler functions **********************************************/
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group8
+ * @{
+ */
+/* Control functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel);
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig);
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource);
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group9
+ * @{
+ */
+/* Callback in non blocking modes (Interrupt and DMA) *************************/
+void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim);
+
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group10
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup TIM_Private_Macros TIM Private Macros
+ * @{
+ */
+
+/** @defgroup TIM_IS_TIM_Definitions TIM Private macros to check input parameters
+ * @{
+ */
+#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_COUNTERMODE_UP) || \
+ ((MODE) == TIM_COUNTERMODE_DOWN) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED1) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED2) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED3))
+
+#define IS_TIM_CLOCKDIVISION_DIV(DIV) (((DIV) == TIM_CLOCKDIVISION_DIV1) || \
+ ((DIV) == TIM_CLOCKDIVISION_DIV2) || \
+ ((DIV) == TIM_CLOCKDIVISION_DIV4))
+
+#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \
+ ((MODE) == TIM_OCMODE_PWM2))
+
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING) || \
+ ((MODE) == TIM_OCMODE_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_INACTIVE) || \
+ ((MODE) == TIM_OCMODE_TOGGLE) || \
+ ((MODE) == TIM_OCMODE_FORCED_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_FORCED_INACTIVE))
+
+#define IS_TIM_FAST_STATE(STATE) (((STATE) == TIM_OCFAST_DISABLE) || \
+ ((STATE) == TIM_OCFAST_ENABLE))
+
+#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPOLARITY_HIGH) || \
+ ((POLARITY) == TIM_OCPOLARITY_LOW))
+
+#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPOLARITY_HIGH) || \
+ ((POLARITY) == TIM_OCNPOLARITY_LOW))
+
+#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIDLESTATE_SET) || \
+ ((STATE) == TIM_OCIDLESTATE_RESET))
+
+#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIDLESTATE_SET) || \
+ ((STATE) == TIM_OCNIDLESTATE_RESET))
+
+#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4) || \
+ ((CHANNEL) == TIM_CHANNEL_ALL))
+
+#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))
+
+#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPOLARITY_RISING) || \
+ ((POLARITY) == TIM_ICPOLARITY_FALLING) || \
+ ((POLARITY) == TIM_ICPOLARITY_BOTHEDGE))
+
+#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSELECTION_DIRECTTI) || \
+ ((SELECTION) == TIM_ICSELECTION_INDIRECTTI) || \
+ ((SELECTION) == TIM_ICSELECTION_TRC))
+
+#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \
+ ((PRESCALER) == TIM_ICPSC_DIV2) || \
+ ((PRESCALER) == TIM_ICPSC_DIV4) || \
+ ((PRESCALER) == TIM_ICPSC_DIV8))
+
+#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMODE_SINGLE) || \
+ ((MODE) == TIM_OPMODE_REPETITIVE))
+
+#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & 0xFFFF80FF) == 0x00000000) && ((SOURCE) != 0x00000000))
+
+#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_ENCODERMODE_TI1) || \
+ ((MODE) == TIM_ENCODERMODE_TI2) || \
+ ((MODE) == TIM_ENCODERMODE_TI12))
+
+#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & 0xFFFFFF00) == 0x00000000) && ((SOURCE) != 0x00000000))
+
+#define IS_TIM_CLOCKSOURCE(CLOCK) (((CLOCK) == TIM_CLOCKSOURCE_INTERNAL) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR0) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR1) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR3) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI1ED) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI1) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE1))
+
+#define IS_TIM_CLOCKPOLARITY(POLARITY) (((POLARITY) == TIM_CLOCKPOLARITY_INVERTED) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_NONINVERTED) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_RISING) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_FALLING) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_BOTHEDGE))
+
+#define IS_TIM_CLOCKPRESCALER(PRESCALER) (((PRESCALER) == TIM_CLOCKPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV8))
+
+#define IS_TIM_CLOCKFILTER(ICFILTER) ((ICFILTER) <= 0xF)
+
+#define IS_TIM_CLEARINPUT_SOURCE(SOURCE) (((SOURCE) == TIM_CLEARINPUTSOURCE_NONE) || \
+ ((SOURCE) == TIM_CLEARINPUTSOURCE_ETR))
+
+#define IS_TIM_CLEARINPUT_POLARITY(POLARITY) (((POLARITY) == TIM_CLEARINPUTPOLARITY_INVERTED) || \
+ ((POLARITY) == TIM_CLEARINPUTPOLARITY_NONINVERTED))
+
+#define IS_TIM_CLEARINPUT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV8))
+
+#define IS_TIM_CLEARINPUT_FILTER(ICFILTER) ((ICFILTER) <= 0xF)
+
+#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSR_ENABLE) || \
+ ((STATE) == TIM_OSSR_DISABLE))
+
+#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSI_ENABLE) || \
+ ((STATE) == TIM_OSSI_DISABLE))
+
+#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLEVEL_OFF) || \
+ ((LEVEL) == TIM_LOCKLEVEL_1) || \
+ ((LEVEL) == TIM_LOCKLEVEL_2) || \
+ ((LEVEL) == TIM_LOCKLEVEL_3))
+
+#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_BREAK_ENABLE) || \
+ ((STATE) == TIM_BREAK_DISABLE))
+
+#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BREAKPOLARITY_LOW) || \
+ ((POLARITY) == TIM_BREAKPOLARITY_HIGH))
+
+#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AUTOMATICOUTPUT_ENABLE) || \
+ ((STATE) == TIM_AUTOMATICOUTPUT_DISABLE))
+
+#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO_RESET) || \
+ ((SOURCE) == TIM_TRGO_ENABLE) || \
+ ((SOURCE) == TIM_TRGO_UPDATE) || \
+ ((SOURCE) == TIM_TRGO_OC1) || \
+ ((SOURCE) == TIM_TRGO_OC1REF) || \
+ ((SOURCE) == TIM_TRGO_OC2REF) || \
+ ((SOURCE) == TIM_TRGO_OC3REF) || \
+ ((SOURCE) == TIM_TRGO_OC4REF))
+
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \
+ ((MODE) == TIM_SLAVEMODE_GATED) || \
+ ((MODE) == TIM_SLAVEMODE_RESET) || \
+ ((MODE) == TIM_SLAVEMODE_TRIGGER) || \
+ ((MODE) == TIM_SLAVEMODE_EXTERNAL1))
+
+#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MASTERSLAVEMODE_ENABLE) || \
+ ((STATE) == TIM_MASTERSLAVEMODE_DISABLE))
+
+#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3) || \
+ ((SELECTION) == TIM_TS_TI1F_ED) || \
+ ((SELECTION) == TIM_TS_TI1FP1) || \
+ ((SELECTION) == TIM_TS_TI2FP2) || \
+ ((SELECTION) == TIM_TS_ETRF))
+
+#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3) || \
+ ((SELECTION) == TIM_TS_NONE))
+#define IS_TIM_TRIGGERPOLARITY(POLARITY) (((POLARITY) == TIM_TRIGGERPOLARITY_INVERTED ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_NONINVERTED) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_RISING ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_FALLING ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_BOTHEDGE ))
+
+#define IS_TIM_TRIGGERPRESCALER(PRESCALER) (((PRESCALER) == TIM_TRIGGERPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV8))
+
+#define IS_TIM_TRIGGERFILTER(ICFILTER) ((ICFILTER) <= 0xF)
+
+#define IS_TIM_TI1SELECTION(TI1SELECTION) (((TI1SELECTION) == TIM_TI1SELECTION_CH1) || \
+ ((TI1SELECTION) == TIM_TI1SELECTION_XORCOMBINATION))
+
+#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABASE_CR1) || \
+ ((BASE) == TIM_DMABASE_CR2) || \
+ ((BASE) == TIM_DMABASE_SMCR) || \
+ ((BASE) == TIM_DMABASE_DIER) || \
+ ((BASE) == TIM_DMABASE_SR) || \
+ ((BASE) == TIM_DMABASE_EGR) || \
+ ((BASE) == TIM_DMABASE_CCMR1) || \
+ ((BASE) == TIM_DMABASE_CCMR2) || \
+ ((BASE) == TIM_DMABASE_CCER) || \
+ ((BASE) == TIM_DMABASE_CNT) || \
+ ((BASE) == TIM_DMABASE_PSC) || \
+ ((BASE) == TIM_DMABASE_ARR) || \
+ ((BASE) == TIM_DMABASE_RCR) || \
+ ((BASE) == TIM_DMABASE_CCR1) || \
+ ((BASE) == TIM_DMABASE_CCR2) || \
+ ((BASE) == TIM_DMABASE_CCR3) || \
+ ((BASE) == TIM_DMABASE_CCR4) || \
+ ((BASE) == TIM_DMABASE_BDTR) || \
+ ((BASE) == TIM_DMABASE_DCR) || \
+ ((BASE) == TIM_DMABASE_OR))
+
+#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABURSTLENGTH_1TRANSFER) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_2TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_3TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_4TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_5TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_6TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_7TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_8TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_9TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_10TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_11TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_12TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_13TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_14TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_15TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_16TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_17TRANSFERS) || \
+ ((LENGTH) == TIM_DMABURSTLENGTH_18TRANSFERS))
+
+#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Mask_Definitions TIM Mask Definition
+ * @{
+ */
+/* The counter of a timer instance is disabled only if all the CCx and CCxN
+ channels have been disabled */
+#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E))
+#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup TIM_Private_Functions TIM Private Functions
+ * @{
+ */
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure);
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter);
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma);
+void TIM_DMAError(DMA_HandleTypeDef *hdma);
+void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma);
+void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_TIM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_tim_ex.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,325 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_tim_ex.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of TIM HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_TIM_EX_H
+#define __STM32F4xx_HAL_TIM_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TIMEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Types TIM Exported Types
+ * @{
+ */
+
+/**
+ * @brief TIM Hall sensor Configuration Structure definition
+ */
+
+typedef struct
+{
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+ uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+} TIM_HallSensor_InitTypeDef;
+
+/**
+ * @brief TIM Master configuration Structure definition
+ */
+typedef struct {
+ uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection.
+ This parameter can be a value of @ref TIM_Master_Mode_Selection */
+ uint32_t MasterSlaveMode; /*!< Master/slave mode selection.
+ This parameter can be a value of @ref TIM_Master_Slave_Mode */
+}TIM_MasterConfigTypeDef;
+
+/**
+ * @brief TIM Break and Dead time configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OffStateRunMode; /*!< TIM off state in run mode.
+ This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+ uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode.
+ This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+ uint32_t LockLevel; /*!< TIM Lock level.
+ This parameter can be a value of @ref TIM_Lock_level */
+ uint32_t DeadTime; /*!< TIM dead Time.
+ This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+ uint32_t BreakState; /*!< TIM Break State.
+ This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+ uint32_t BreakPolarity; /*!< TIM Break input polarity.
+ This parameter can be a value of @ref TIM_Break_Polarity */
+ uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state.
+ This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+}TIM_BreakDeadTimeConfigTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Constants TIM Exported Constants
+ * @{
+ */
+
+/** @defgroup TIMEx_Remap TIM Remap
+ * @{
+ */
+#define TIM_TIM2_TIM8_TRGO (0x00000000)
+#define TIM_TIM2_ETH_PTP (0x00000400)
+#define TIM_TIM2_USBFS_SOF (0x00000800)
+#define TIM_TIM2_USBHS_SOF (0x00000C00)
+#define TIM_TIM5_GPIO (0x00000000)
+#define TIM_TIM5_LSI (0x00000040)
+#define TIM_TIM5_LSE (0x00000080)
+#define TIM_TIM5_RTC (0x000000C0)
+#define TIM_TIM11_GPIO (0x00000000)
+#define TIM_TIM11_HSE (0x00000002)
+
+#if defined (STM32F446xx)
+#define TIM_TIM11_SPDIFRX (0x00000001)
+#endif /* STM32F446xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIMEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group1
+ * @{
+ */
+/* Timer Hall Sensor functions **********************************************/
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef* htim, TIM_HallSensor_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef* htim);
+
+void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef* htim);
+
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef* htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef* htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef* htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef* htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef* htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef* htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group2
+ * @{
+ */
+/* Timer Complementary Output Compare functions *****************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group3
+ * @{
+ */
+/* Timer Complementary PWM functions ****************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group4
+ * @{
+ */
+/* Timer Complementary One Pulse functions **********************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group5
+ * @{
+ */
+/* Extension Control functions ************************************************/
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef* htim, TIM_MasterConfigTypeDef * sMasterConfig);
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef* htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef* htim, uint32_t Remap);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group6
+ * @{
+ */
+/* Extension Callback *********************************************************/
+void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef* htim);
+void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group7
+ * @{
+ */
+/* Extension Peripheral State functions **************************************/
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef* htim);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup TIMEx_Private_Macros TIM Private Macros
+ * @{
+ */
+#if defined (STM32F446xx)
+#define IS_TIM_REMAP(TIM_REMAP) (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)||\
+ ((TIM_REMAP) == TIM_TIM2_ETH_PTP)||\
+ ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)||\
+ ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)||\
+ ((TIM_REMAP) == TIM_TIM5_GPIO)||\
+ ((TIM_REMAP) == TIM_TIM5_LSI)||\
+ ((TIM_REMAP) == TIM_TIM5_LSE)||\
+ ((TIM_REMAP) == TIM_TIM5_RTC)||\
+ ((TIM_REMAP) == TIM_TIM11_GPIO)||\
+ ((TIM_REMAP) == TIM_TIM11_SPDIFRX)||\
+ ((TIM_REMAP) == TIM_TIM11_HSE))
+#else
+#define IS_TIM_REMAP(TIM_REMAP) (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)||\
+ ((TIM_REMAP) == TIM_TIM2_ETH_PTP)||\
+ ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)||\
+ ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)||\
+ ((TIM_REMAP) == TIM_TIM5_GPIO)||\
+ ((TIM_REMAP) == TIM_TIM5_LSI)||\
+ ((TIM_REMAP) == TIM_TIM5_LSE)||\
+ ((TIM_REMAP) == TIM_TIM5_RTC)||\
+ ((TIM_REMAP) == TIM_TIM11_GPIO)||\
+ ((TIM_REMAP) == TIM_TIM11_HSE))
+#endif /* STM32F446xx */
+
+
+#define IS_TIM_DEADTIME(DEADTIME) ((DEADTIME) <= 0xFF)
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup TIMEx_Private_Functions TIM Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_TIM_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_uart.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,722 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_uart.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of UART HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_UART_H
+#define __STM32F4xx_HAL_UART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup UART
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup UART_Exported_Types UART Exported Types
+ * @{
+ */
+
+/**
+ * @brief UART Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
+ The baud rate is computed using the following formula:
+ - IntegerDivider = ((PCLKx) / (8 * (OVR8+1) * (huart->Init.BaudRate)))
+ - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8 * (OVR8+1)) + 0.5
+ Where OVR8 is the "oversampling by 8 mode" configuration bit in the CR1 register. */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref UART_Word_Length */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref UART_Stop_Bits */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref UART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref UART_Mode */
+
+ uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled
+ or disabled.
+ This parameter can be a value of @ref UART_Hardware_Flow_Control */
+
+ uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
+ This parameter can be a value of @ref UART_Over_Sampling */
+}UART_InitTypeDef;
+
+/**
+ * @brief HAL UART State structures definition
+ */
+typedef enum
+{
+ HAL_UART_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */
+ HAL_UART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_UART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_UART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_UART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_UART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_UART_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_UART_STATE_ERROR = 0x04 /*!< Error */
+}HAL_UART_StateTypeDef;
+
+/**
+ * @brief UART handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /*!< UART registers base address */
+
+ UART_InitTypeDef Init; /*!< UART communication parameters */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */
+
+ uint16_t TxXferSize; /*!< UART Tx Transfer size */
+
+ uint16_t TxXferCount; /*!< UART Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */
+
+ uint16_t RxXferSize; /*!< UART Rx Transfer size */
+
+ uint16_t RxXferCount; /*!< UART Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ __IO HAL_UART_StateTypeDef State; /*!< UART communication state */
+
+ __IO uint32_t ErrorCode; /*!< UART Error code */
+
+}UART_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup UART_Exported_Constants UART Exported constants
+ * @{
+ */
+
+/** @defgroup UART_Error_Code UART Error Code
+ * @brief UART Error Code
+ * @{
+ */
+#define HAL_UART_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_UART_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */
+#define HAL_UART_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */
+#define HAL_UART_ERROR_FE ((uint32_t)0x00000004) /*!< Frame error */
+#define HAL_UART_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */
+#define HAL_UART_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Word_Length UART Word Length
+ * @{
+ */
+#define UART_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Stop_Bits UART Number of Stop Bits
+ * @{
+ */
+#define UART_STOPBITS_1 ((uint32_t)0x00000000)
+#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Parity UART Parity
+ * @{
+ */
+#define UART_PARITY_NONE ((uint32_t)0x00000000)
+#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
+ * @{
+ */
+#define UART_HWCONTROL_NONE ((uint32_t)0x00000000)
+#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE)
+#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE)
+#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Mode UART Transfer Mode
+ * @{
+ */
+#define UART_MODE_RX ((uint32_t)USART_CR1_RE)
+#define UART_MODE_TX ((uint32_t)USART_CR1_TE)
+#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+/**
+ * @}
+ */
+
+ /** @defgroup UART_State UART State
+ * @{
+ */
+#define UART_STATE_DISABLE ((uint32_t)0x00000000)
+#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Over_Sampling UART Over Sampling
+ * @{
+ */
+#define UART_OVERSAMPLING_16 ((uint32_t)0x00000000)
+#define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8)
+/**
+ * @}
+ */
+
+/** @defgroup UART_LIN_Break_Detection_Length UART LIN Break Detection Length
+ * @{
+ */
+#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000)
+#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)0x00000020)
+/**
+ * @}
+ */
+
+/** @defgroup UART_WakeUp_functions UART Wakeup Functions
+ * @{
+ */
+#define UART_WAKEUPMETHOD_IDLELINE ((uint32_t)0x00000000)
+#define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)0x00000800)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Flags UART FLags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the SR register
+ * @{
+ */
+#define UART_FLAG_CTS ((uint32_t)USART_SR_CTS)
+#define UART_FLAG_LBD ((uint32_t)USART_SR_LBD)
+#define UART_FLAG_TXE ((uint32_t)USART_SR_TXE)
+#define UART_FLAG_TC ((uint32_t)USART_SR_TC)
+#define UART_FLAG_RXNE ((uint32_t)USART_SR_RXNE)
+#define UART_FLAG_IDLE ((uint32_t)USART_SR_IDLE)
+#define UART_FLAG_ORE ((uint32_t)USART_SR_ORE)
+#define UART_FLAG_NE ((uint32_t)USART_SR_NE)
+#define UART_FLAG_FE ((uint32_t)USART_SR_FE)
+#define UART_FLAG_PE ((uint32_t)USART_SR_PE)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Interrupt_definition UART Interrupt Definitions
+ * Elements values convention: 0xY000XXXX
+ * - XXXX : Interrupt mask (16 bits) in the Y register
+ * - Y : Interrupt source register (2bits)
+ * - 0001: CR1 register
+ * - 0010: CR2 register
+ * - 0011: CR3 register
+ *
+ * @{
+ */
+
+#define UART_IT_PE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_PEIE))
+#define UART_IT_TXE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_TXEIE))
+#define UART_IT_TC ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_TCIE))
+#define UART_IT_RXNE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_RXNEIE))
+#define UART_IT_IDLE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_IDLEIE))
+
+#define UART_IT_LBD ((uint32_t)(UART_CR2_REG_INDEX << 28 | USART_CR2_LBDIE))
+
+#define UART_IT_CTS ((uint32_t)(UART_CR3_REG_INDEX << 28 | USART_CR3_CTSIE))
+#define UART_IT_ERR ((uint32_t)(UART_CR3_REG_INDEX << 28 | USART_CR3_EIE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup UART_Exported_Macros UART Exported Macros
+ * @{
+ */
+
+/** @brief Reset UART handle state
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_UART_STATE_RESET)
+
+/** @brief Flushes the UART DR register
+ * @param __HANDLE__: specifies the UART Handle.
+ */
+#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
+
+/** @brief Checks whether the specified UART flag is set or not.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5)
+ * @arg UART_FLAG_LBD: LIN Break detection flag
+ * @arg UART_FLAG_TXE: Transmit data register empty flag
+ * @arg UART_FLAG_TC: Transmission Complete flag
+ * @arg UART_FLAG_RXNE: Receive data register not empty flag
+ * @arg UART_FLAG_IDLE: Idle Line detection flag
+ * @arg UART_FLAG_ORE: Overrun Error flag
+ * @arg UART_FLAG_NE: Noise Error flag
+ * @arg UART_FLAG_FE: Framing Error flag
+ * @arg UART_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+
+#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified UART pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5).
+ * @arg UART_FLAG_LBD: LIN Break detection flag.
+ * @arg UART_FLAG_TC: Transmission Complete flag.
+ * @arg UART_FLAG_RXNE: Receive data register not empty flag.
+ *
+ * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (Overrun
+ * error) and IDLE (Idle line detected) flags are cleared by software
+ * sequence: a read operation to USART_SR register followed by a read
+ * operation to USART_DR register.
+ * @note RXNE flag can be also cleared by a read to the USART_DR register.
+ * @note TC flag can be also cleared by software sequence: a read operation to
+ * USART_SR register followed by a write operation to USART_DR register.
+ * @note TXE flag is cleared only by a write to the USART_DR register.
+ *
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief Clear the UART PE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ tmpreg = (__HANDLE__)->Instance->DR; \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Clear the UART FE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the UART NE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the UART ORE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the UART IDLE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Enable the specified UART interrupt.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __INTERRUPT__: specifies the UART interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_CTS: CTS change interrupt
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define UART_IT_MASK ((uint32_t)0x0000FFFF)
+#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & UART_IT_MASK)): \
+ (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & UART_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & UART_IT_MASK)))
+/** @brief Disable the specified UART interrupt.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __INTERRUPT__: specifies the UART interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_CTS: CTS change interrupt
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
+ (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & UART_IT_MASK)))
+
+/** @brief Checks whether the specified UART interrupt has occurred or not.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __IT__: specifies the UART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ERR: Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == 1)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28) == 2)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK))
+
+/** @brief Enable CTS flow control
+ * This macro allows to enable CTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \
+ do{ \
+ SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
+ (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \
+ } while(0)
+
+/** @brief Disable CTS flow control
+ * This macro allows to disable CTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \
+ do{ \
+ CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
+ (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \
+ } while(0)
+
+/** @brief Enable RTS flow control
+ * This macro allows to enable RTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \
+ do{ \
+ SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
+ (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \
+ } while(0)
+
+/** @brief Disable RTS flow control
+ * This macro allows to disable RTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \
+ do{ \
+ CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
+ (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \
+ } while(0)
+
+/** @brief macros to enables the UART's one bit sample method
+ * @param __HANDLE__: specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+
+/** @brief macros to disables the UART's one bit sample method
+ * @param __HANDLE__: specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
+
+/** @brief Enable UART
+ * @param __HANDLE__: specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable UART
+ * @param __HANDLE__: specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup UART_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup UART_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
+HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
+HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart);
+void HAL_UART_MspInit(UART_HandleTypeDef *huart);
+void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
+void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
+void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Exported_Functions_Group4
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
+uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup UART_Private_Constants UART Private Constants
+ * @{
+ */
+/** @brief UART interruptions flag mask
+ *
+ */
+#define UART_CR1_REG_INDEX 1
+#define UART_CR2_REG_INDEX 2
+#define UART_CR3_REG_INDEX 3
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup UART_Private_Macros UART Private Macros
+ * @{
+ */
+#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \
+ ((LENGTH) == UART_WORDLENGTH_9B))
+#define IS_UART_LIN_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B))
+#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
+ ((STOPBITS) == UART_STOPBITS_2))
+#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \
+ ((PARITY) == UART_PARITY_EVEN) || \
+ ((PARITY) == UART_PARITY_ODD))
+#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
+ (((CONTROL) == UART_HWCONTROL_NONE) || \
+ ((CONTROL) == UART_HWCONTROL_RTS) || \
+ ((CONTROL) == UART_HWCONTROL_CTS) || \
+ ((CONTROL) == UART_HWCONTROL_RTS_CTS))
+#define IS_UART_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3) == 0x00) && ((MODE) != (uint32_t)0x000000))
+#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \
+ ((STATE) == UART_STATE_ENABLE))
+#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \
+ ((SAMPLING) == UART_OVERSAMPLING_8))
+#define IS_UART_LIN_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16))
+#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
+ ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
+#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \
+ ((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK))
+#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001)
+#define IS_UART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF)
+
+#define UART_DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_)*25)/(4*(_BAUD_)))
+#define UART_DIVMANT_SAMPLING16(_PCLK_, _BAUD_) (UART_DIV_SAMPLING16((_PCLK_), (_BAUD_))/100)
+#define UART_DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100)
+#define UART_BRR_SAMPLING16(_PCLK_, _BAUD_) ((UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4)|(UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0x0F))
+
+#define UART_DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*25)/(2*(_BAUD_)))
+#define UART_DIVMANT_SAMPLING8(_PCLK_, _BAUD_) (UART_DIV_SAMPLING8((_PCLK_), (_BAUD_))/100)
+#define UART_DIVFRAQ_SAMPLING8(_PCLK_, _BAUD_) (((UART_DIV_SAMPLING8((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100)
+#define UART_BRR_SAMPLING8(_PCLK_, _BAUD_) ((UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) << 4)|(UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0x0F))
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup UART_Private_Functions UART Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_UART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_usart.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,588 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_usart.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of USART HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_USART_H
+#define __STM32F4xx_HAL_USART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup USART
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup USART_Exported_Types USART Exported Types
+ * @{
+ */
+
+/**
+ * @brief USART Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the Usart communication baud rate.
+ The baud rate is computed using the following formula:
+ - IntegerDivider = ((PCLKx) / (8 * (husart->Init.BaudRate)))
+ - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref USART_Word_Length */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref USART_Stop_Bits */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref USART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref USART_Mode */
+
+ uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
+ This parameter can be a value of @ref USART_Clock_Polarity */
+
+ uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref USART_Clock_Phase */
+
+ uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref USART_Last_Bit */
+}USART_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_USART_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */
+ HAL_USART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_USART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_USART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_USART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_USART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission Reception process is ongoing */
+ HAL_USART_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_USART_STATE_ERROR = 0x04 /*!< Error */
+}HAL_USART_StateTypeDef;
+
+/**
+ * @brief USART handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /* USART registers base address */
+
+ USART_InitTypeDef Init; /* Usart communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to Usart Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* Usart Tx Transfer size */
+
+ __IO uint16_t TxXferCount; /* Usart Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to Usart Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* Usart Rx Transfer size */
+
+ __IO uint16_t RxXferCount; /* Usart Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /* Usart Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* Usart Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ __IO HAL_USART_StateTypeDef State; /* Usart communication state */
+
+ __IO uint32_t ErrorCode; /* USART Error code */
+
+}USART_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup USART_Exported_Constants USART Exported Constants
+ * @{
+ */
+
+/** @defgroup USART_Error_Code USART Error Code
+ * @brief USART Error Code
+ * @{
+ */
+#define HAL_USART_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_USART_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */
+#define HAL_USART_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */
+#define HAL_USART_ERROR_FE ((uint32_t)0x00000004) /*!< Frame error */
+#define HAL_USART_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */
+#define HAL_USART_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
+/** @defgroup USART_Word_Length USART Word Length
+ * @{
+ */
+#define USART_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define USART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+/**
+ * @}
+ */
+
+/** @defgroup USART_Stop_Bits USART Number of Stop Bits
+ * @{
+ */
+#define USART_STOPBITS_1 ((uint32_t)0x00000000)
+#define USART_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0)
+#define USART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+#define USART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Parity USART Parity
+ * @{
+ */
+#define USART_PARITY_NONE ((uint32_t)0x00000000)
+#define USART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define USART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Mode USART Mode
+ * @{
+ */
+#define USART_MODE_RX ((uint32_t)USART_CR1_RE)
+#define USART_MODE_TX ((uint32_t)USART_CR1_TE)
+#define USART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock USART Clock
+ * @{
+ */
+#define USART_CLOCK_DISABLE ((uint32_t)0x00000000)
+#define USART_CLOCK_ENABLE ((uint32_t)USART_CR2_CLKEN)
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Polarity USART Clock Polarity
+ * @{
+ */
+#define USART_POLARITY_LOW ((uint32_t)0x00000000)
+#define USART_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL)
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Phase USART Clock Phase
+ * @{
+ */
+#define USART_PHASE_1EDGE ((uint32_t)0x00000000)
+#define USART_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA)
+/**
+ * @}
+ */
+
+/** @defgroup USART_Last_Bit USART Last Bit
+ * @{
+ */
+#define USART_LASTBIT_DISABLE ((uint32_t)0x00000000)
+#define USART_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL)
+/**
+ * @}
+ */
+
+/** @defgroup USART_NACK_State USART NACK State
+ * @{
+ */
+#define USART_NACK_ENABLE ((uint32_t)USART_CR3_NACK)
+#define USART_NACK_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup USART_Flags USART Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the SR register
+ * @{
+ */
+#define USART_FLAG_TXE ((uint32_t)0x00000080)
+#define USART_FLAG_TC ((uint32_t)0x00000040)
+#define USART_FLAG_RXNE ((uint32_t)0x00000020)
+#define USART_FLAG_IDLE ((uint32_t)0x00000010)
+#define USART_FLAG_ORE ((uint32_t)0x00000008)
+#define USART_FLAG_NE ((uint32_t)0x00000004)
+#define USART_FLAG_FE ((uint32_t)0x00000002)
+#define USART_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup USART_Interrupt_definition USART Interrupts Definition
+ * Elements values convention: 0xY000XXXX
+ * - XXXX : Interrupt mask in the XX register
+ * - Y : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ *
+ * @{
+ */
+#define USART_IT_PE ((uint32_t)(USART_CR1_REG_INDEX << 28 | USART_CR1_PEIE))
+#define USART_IT_TXE ((uint32_t)(USART_CR1_REG_INDEX << 28 | USART_CR1_TXEIE))
+#define USART_IT_TC ((uint32_t)(USART_CR1_REG_INDEX << 28 | USART_CR1_TCIE))
+#define USART_IT_RXNE ((uint32_t)(USART_CR1_REG_INDEX << 28 | USART_CR1_RXNEIE))
+#define USART_IT_IDLE ((uint32_t)(USART_CR1_REG_INDEX << 28 | USART_CR1_IDLEIE))
+
+#define USART_IT_LBD ((uint32_t)(USART_CR2_REG_INDEX << 28 | USART_CR2_LBDIE))
+
+#define USART_IT_CTS ((uint32_t)(USART_CR3_REG_INDEX << 28 | USART_CR3_CTSIE))
+#define USART_IT_ERR ((uint32_t)(USART_CR3_REG_INDEX << 28 | USART_CR3_EIE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup USART_Exported_Macros USART Exported Macros
+ * @{
+ */
+
+/** @brief Reset USART handle state
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_USART_STATE_RESET)
+
+/** @brief Checks whether the specified Smartcard flag is set or not.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg USART_FLAG_TXE: Transmit data register empty flag
+ * @arg USART_FLAG_TC: Transmission Complete flag
+ * @arg USART_FLAG_RXNE: Receive data register not empty flag
+ * @arg USART_FLAG_IDLE: Idle Line detection flag
+ * @arg USART_FLAG_ORE: Overrun Error flag
+ * @arg USART_FLAG_NE: Noise Error flag
+ * @arg USART_FLAG_FE: Framing Error flag
+ * @arg USART_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_USART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified Smartcard pending flags.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg USART_FLAG_TC: Transmission Complete flag.
+ * @arg USART_FLAG_RXNE: Receive data register not empty flag.
+ *
+ * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (Overrun
+ * error) and IDLE (Idle line detected) flags are cleared by software
+ * sequence: a read operation to USART_SR register followed by a read
+ * operation to USART_DR register.
+ * @note RXNE flag can be also cleared by a read to the USART_DR register.
+ * @note TC flag can be also cleared by software sequence: a read operation to
+ * USART_SR register followed by a write operation to USART_DR register.
+ * @note TXE flag is cleared only by a write to the USART_DR register.
+ *
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief Clear the USART PE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_PEFLAG(__HANDLE__) \
+ do{ \
+ __IO uint32_t tmpreg; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ tmpreg = (__HANDLE__)->Instance->DR; \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Clear the USART FE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_FEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the USART NE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_NEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the UART ORE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_OREFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the USART IDLE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Enables or disables the specified USART interrupts.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @param __INTERRUPT__: specifies the USART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+#define __HAL_USART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & USART_IT_MASK)): \
+ (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & USART_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & USART_IT_MASK)))
+#define __HAL_USART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & USART_IT_MASK)): \
+ (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & USART_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & USART_IT_MASK)))
+
+/** @brief Checks whether the specified USART interrupt has occurred or not.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @param __IT__: specifies the USART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ERR: Error interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == 1)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28) == 2)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & USART_IT_MASK))
+
+/** @brief Macro to enable the USART's one bit sample method
+ * @param __HANDLE__: specifies the USART Handle.
+ * @retval None
+ */
+#define __HAL_USART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+
+/** @brief Macro to disable the USART's one bit sample method
+ * @param __HANDLE__: specifies the USART Handle.
+ * @retval None
+ */
+#define __HAL_USART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
+
+/** @brief Enable USART
+ * @param __HANDLE__: specifies the USART Handle.
+ * USART Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @retval None
+ */
+#define __HAL_USART_ENABLE(__HANDLE__) ( (__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable USART
+ * @param __HANDLE__: specifies the USART Handle.
+ * USART Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @retval None
+ */
+#define __HAL_USART_DISABLE(__HANDLE__) ( (__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup USART_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup USART_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspDeInit(USART_HandleTypeDef *husart);
+/**
+ * @}
+ */
+
+/** @addtogroup USART_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart);
+void HAL_USART_IRQHandler(USART_HandleTypeDef *husart);
+void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart);
+/**
+ * @}
+ */
+
+/** @addtogroup USART_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions ************************************************/
+HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart);
+uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup USART_Private_Constants USART Private Constants
+ * @{
+ */
+/** @brief USART interruptions flag mask
+ *
+ */
+#define USART_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \
+ USART_CR1_IDLEIE | USART_CR2_LBDIE | USART_CR3_CTSIE | USART_CR3_EIE )
+
+
+#define USART_CR1_REG_INDEX 1
+#define USART_CR2_REG_INDEX 2
+#define USART_CR3_REG_INDEX 3
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup USART_Private_Macros USART Private Macros
+ * @{
+ */
+#define IS_USART_NACK_STATE(NACK) (((NACK) == USART_NACK_ENABLE) || \
+ ((NACK) == USART_NACK_DISABLE))
+#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LASTBIT_DISABLE) || \
+ ((LASTBIT) == USART_LASTBIT_ENABLE))
+#define IS_USART_PHASE(CPHA) (((CPHA) == USART_PHASE_1EDGE) || ((CPHA) == USART_PHASE_2EDGE))
+#define IS_USART_POLARITY(CPOL) (((CPOL) == USART_POLARITY_LOW) || ((CPOL) == USART_POLARITY_HIGH))
+#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_CLOCK_DISABLE) || \
+ ((CLOCK) == USART_CLOCK_ENABLE))
+#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WORDLENGTH_8B) || \
+ ((LENGTH) == USART_WORDLENGTH_9B))
+#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_STOPBITS_1) || \
+ ((STOPBITS) == USART_STOPBITS_0_5) || \
+ ((STOPBITS) == USART_STOPBITS_1_5) || \
+ ((STOPBITS) == USART_STOPBITS_2))
+#define IS_USART_PARITY(PARITY) (((PARITY) == USART_PARITY_NONE) || \
+ ((PARITY) == USART_PARITY_EVEN) || \
+ ((PARITY) == USART_PARITY_ODD))
+#define IS_USART_MODE(MODE) ((((MODE) & (uint32_t)0xFFF3) == 0x00) && ((MODE) != (uint32_t)0x00))
+#define IS_USART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001)
+
+#define USART_DIV(_PCLK_, _BAUD_) (((_PCLK_)*25)/(2*(_BAUD_)))
+#define USART_DIVMANT(_PCLK_, _BAUD_) (USART_DIV((_PCLK_), (_BAUD_))/100)
+#define USART_DIVFRAQ(_PCLK_, _BAUD_) (((USART_DIV((_PCLK_), (_BAUD_)) - (USART_DIVMANT((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100)
+#define USART_BRR(_PCLK_, _BAUD_) ((USART_DIVMANT((_PCLK_), (_BAUD_)) << 4)|(USART_DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0F))
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup USART_Private_Functions USART Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_USART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_hal_wwdg.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,349 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_wwdg.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of WWDG HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_WWDG_H
+#define __STM32F4xx_HAL_WWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup WWDG
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup WWDG_Exported_Types WWDG Exported Types
+ * @{
+ */
+
+/**
+ * @brief WWDG HAL State Structure definition
+ */
+typedef enum
+{
+ HAL_WWDG_STATE_RESET = 0x00, /*!< WWDG not yet initialized or disabled */
+ HAL_WWDG_STATE_READY = 0x01, /*!< WWDG initialized and ready for use */
+ HAL_WWDG_STATE_BUSY = 0x02, /*!< WWDG internal process is ongoing */
+ HAL_WWDG_STATE_TIMEOUT = 0x03, /*!< WWDG timeout state */
+ HAL_WWDG_STATE_ERROR = 0x04 /*!< WWDG error state */
+}HAL_WWDG_StateTypeDef;
+
+/**
+ * @brief WWDG Init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the prescaler value of the WWDG.
+ This parameter can be a value of @ref WWDG_Prescaler */
+
+ uint32_t Window; /*!< Specifies the WWDG window value to be compared to the downcounter.
+ This parameter must be a number lower than Max_Data = 0x80 */
+
+ uint32_t Counter; /*!< Specifies the WWDG free-running downcounter value.
+ This parameter must be a number between Min_Data = 0x40 and Max_Data = 0x7F */
+
+}WWDG_InitTypeDef;
+
+/**
+ * @brief WWDG handle Structure definition
+ */
+typedef struct
+{
+ WWDG_TypeDef *Instance; /*!< Register base address */
+
+ WWDG_InitTypeDef Init; /*!< WWDG required parameters */
+
+ HAL_LockTypeDef Lock; /*!< WWDG locking object */
+
+ __IO HAL_WWDG_StateTypeDef State; /*!< WWDG communication state */
+
+}WWDG_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup WWDG_Exported_Constants WWDG Exported Constants
+ * @{
+ */
+
+/** @defgroup WWDG_Interrupt_definition WWDG Interrupt definition
+ * @{
+ */
+#define WWDG_IT_EWI WWDG_CFR_EWI /*!< Early wakeup interrupt */
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Flag_definition WWDG Flag definition
+ * @brief WWDG Flag definition
+ * @{
+ */
+#define WWDG_FLAG_EWIF WWDG_SR_EWIF /*!< Early wakeup interrupt flag */
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Prescaler WWDG Prescaler
+ * @{
+ */
+#define WWDG_PRESCALER_1 ((uint32_t)0x00000000) /*!< WWDG counter clock = (PCLK1/4096)/1 */
+#define WWDG_PRESCALER_2 WWDG_CFR_WDGTB0 /*!< WWDG counter clock = (PCLK1/4096)/2 */
+#define WWDG_PRESCALER_4 WWDG_CFR_WDGTB1 /*!< WWDG counter clock = (PCLK1/4096)/4 */
+#define WWDG_PRESCALER_8 WWDG_CFR_WDGTB /*!< WWDG counter clock = (PCLK1/4096)/8 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup WWDG_Exported_Macros WWDG Exported Macros
+ * @{
+ */
+
+/** @brief Reset WWDG handle state
+ * @param __HANDLE__: WWDG handle
+ * @retval None
+ */
+#define __HAL_WWDG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_WWDG_STATE_RESET)
+
+/**
+ * @brief Enables the WWDG peripheral.
+ * @param __HANDLE__: WWDG handle
+ * @retval None
+ */
+#define __HAL_WWDG_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, WWDG_CR_WDGA)
+
+/**
+ * @brief Disables the WWDG peripheral.
+ * @param __HANDLE__: WWDG handle
+ * @note WARNING: This is a dummy macro for HAL code alignment.
+ * Once enable, WWDG Peripheral cannot be disabled except by a system reset.
+ * @retval None
+ */
+#define __HAL_WWDG_DISABLE(__HANDLE__) /* dummy macro */
+
+/**
+ * @brief Gets the selected WWDG's it status.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the it to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt IT
+ * @retval The new state of WWDG_FLAG (SET or RESET).
+ */
+#define __HAL_WWDG_GET_IT(__HANDLE__, __INTERRUPT__) __HAL_WWDG_GET_FLAG((__HANDLE__),(__INTERRUPT__))
+
+/** @brief Clear the WWDG's interrupt pending bits
+ * bits to clear the selected interrupt pending bits.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ */
+#define __HAL_WWDG_CLEAR_IT(__HANDLE__, __INTERRUPT__) __HAL_WWDG_CLEAR_FLAG((__HANDLE__), (__INTERRUPT__))
+
+/**
+ * @brief Enables the WWDG early wakeup interrupt.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the interrupt to enable.
+ * This parameter can be one of the following values:
+ * @arg WWDG_IT_EWI: Early wakeup interrupt
+ * @note Once enabled this interrupt cannot be disabled except by a system reset.
+ * @retval None
+ */
+#define __HAL_WWDG_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CFR, (__INTERRUPT__))
+
+/**
+ * @brief Disables the WWDG early wakeup interrupt.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the interrupt to disable.
+ * This parameter can be one of the following values:
+ * @arg WWDG_IT_EWI: Early wakeup interrupt
+ * @note WARNING: This is a dummy macro for HAL code alignment.
+ * Once enabled this interrupt cannot be disabled except by a system reset.
+ * @retval None
+ */
+#define __HAL_WWDG_DISABLE_IT(__HANDLE__, __INTERRUPT__) /* dummy macro */
+
+/**
+ * @brief Gets the selected WWDG's flag status.
+ * @param __HANDLE__: WWDG handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ * @retval The new state of WWDG_FLAG (SET or RESET).
+ */
+#define __HAL_WWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clears the WWDG's pending flags.
+ * @param __HANDLE__: WWDG handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ * @retval None
+ */
+#define __HAL_WWDG_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__))
+
+/** @brief Checks if the specified WWDG interrupt source is enabled or disabled.
+ * @param __HANDLE__: WWDG Handle.
+ * @param __INTERRUPT__: specifies the WWDG interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_IT_EWI: Early Wakeup Interrupt
+ * @retval state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_WWDG_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CFR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup WWDG_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup WWDG_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg);
+HAL_StatusTypeDef HAL_WWDG_DeInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_MspDeInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_WakeupCallback(WWDG_HandleTypeDef* hwwdg);
+/**
+ * @}
+ */
+
+/** @addtogroup WWDG_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_WWDG_Start(WWDG_HandleTypeDef *hwwdg);
+HAL_StatusTypeDef HAL_WWDG_Start_IT(WWDG_HandleTypeDef *hwwdg);
+HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg, uint32_t Counter);
+void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg);
+/**
+ * @}
+ */
+
+/** @addtogroup WWDG_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+HAL_WWDG_StateTypeDef HAL_WWDG_GetState(WWDG_HandleTypeDef *hwwdg);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup WWDG_Private_Constants WWDG Private Constants
+ * @{
+ */
+/** @defgroup WWDG_BitAddress_AliasRegion WWDG BitAddress
+ * @brief WWDG registers bit address in the alias region
+ * @{
+ */
+
+/* --- CFR Register ---*/
+/* Alias word address of EWI bit */
+#define WWDG_CFR_BASE (uint32_t)(WWDG_BASE + 0x04)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup WWDG_Private_Macros WWDG Private Macros
+ * @{
+ */
+#define IS_WWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == WWDG_PRESCALER_1) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_2) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_4) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_8))
+#define IS_WWDG_WINDOW(__WINDOW__) ((__WINDOW__) <= 0x7F)
+#define IS_WWDG_COUNTER(__COUNTER__) (((__COUNTER__) >= 0x40) && ((__COUNTER__) <= 0x7F))
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup WWDG_Private_Functions WWDG Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_WWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_ll_fmc.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,1421 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_fmc.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of FMC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_LL_FMC_H
+#define __STM32F4xx_LL_FMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FMC_LL
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+/* Private types -------------------------------------------------------------*/
+/** @defgroup FMC_LL_Private_Types FMC Private Types
+ * @{
+ */
+
+/**
+ * @brief FMC NORSRAM Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t NSBank; /*!< Specifies the NORSRAM memory device that will be used.
+ This parameter can be a value of @ref FMC_NORSRAM_Bank */
+
+ uint32_t DataAddressMux; /*!< Specifies whether the address and data values are
+ multiplexed on the data bus or not.
+ This parameter can be a value of @ref FMC_Data_Address_Bus_Multiplexing */
+
+ uint32_t MemoryType; /*!< Specifies the type of external memory attached to
+ the corresponding memory device.
+ This parameter can be a value of @ref FMC_Memory_Type */
+
+ uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be a value of @ref FMC_NORSRAM_Data_Width */
+
+ uint32_t BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory,
+ valid only with synchronous burst Flash memories.
+ This parameter can be a value of @ref FMC_Burst_Access_Mode */
+
+ uint32_t WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing
+ the Flash memory in burst mode.
+ This parameter can be a value of @ref FMC_Wait_Signal_Polarity */
+
+ uint32_t WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash
+ memory, valid only when accessing Flash memories in burst mode.
+ This parameter can be a value of @ref FMC_Wrap_Mode
+ This mode is not available for the STM32F446xx devices */
+
+ uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one
+ clock cycle before the wait state or during the wait state,
+ valid only when accessing memories in burst mode.
+ This parameter can be a value of @ref FMC_Wait_Timing */
+
+ uint32_t WriteOperation; /*!< Enables or disables the write operation in the selected device by the FMC.
+ This parameter can be a value of @ref FMC_Write_Operation */
+
+ uint32_t WaitSignal; /*!< Enables or disables the wait state insertion via wait
+ signal, valid for Flash memory access in burst mode.
+ This parameter can be a value of @ref FMC_Wait_Signal */
+
+ uint32_t ExtendedMode; /*!< Enables or disables the extended mode.
+ This parameter can be a value of @ref FMC_Extended_Mode */
+
+ uint32_t AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers,
+ valid only with asynchronous Flash memories.
+ This parameter can be a value of @ref FMC_AsynchronousWait */
+
+ uint32_t WriteBurst; /*!< Enables or disables the write burst operation.
+ This parameter can be a value of @ref FMC_Write_Burst */
+
+ uint32_t ContinuousClock; /*!< Enables or disables the FMC clock output to external memory devices.
+ This parameter is only enabled through the FMC_BCR1 register, and don't care
+ through FMC_BCR2..4 registers.
+ This parameter can be a value of @ref FMC_Continous_Clock */
+
+ uint32_t WriteFifo; /*!< Enables or disables the write FIFO used by the FMC controller.
+ This parameter is only enabled through the FMC_BCR1 register, and don't care
+ through FMC_BCR2..4 registers.
+ This parameter can be a value of @ref FMC_Write_FIFO
+ This mode is available only for the STM32F446xx devices */
+
+ uint32_t PageSize; /*!< Specifies the memory page size.
+ This parameter can be a value of @ref FMC_Page_Size
+ This mode is available only for the STM32F446xx devices */
+
+}FMC_NORSRAM_InitTypeDef;
+
+/**
+ * @brief FMC NORSRAM Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t AddressSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address setup time.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+ @note This parameter is not used with synchronous NOR Flash memories. */
+
+ uint32_t AddressHoldTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address hold time.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 15.
+ @note This parameter is not used with synchronous NOR Flash memories. */
+
+ uint32_t DataSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the data setup time.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 255.
+ @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed
+ NOR Flash memories. */
+
+ uint32_t BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure
+ the duration of the bus turnaround.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+ @note This parameter is only used for multiplexed NOR Flash memories. */
+
+ uint32_t CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of
+ HCLK cycles. This parameter can be a value between Min_Data = 2 and Max_Data = 16.
+ @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM
+ accesses. */
+
+ uint32_t DataLatency; /*!< Defines the number of memory clock cycles to issue
+ to the memory before getting the first data.
+ The parameter value depends on the memory type as shown below:
+ - It must be set to 0 in case of a CRAM
+ - It is don't care in asynchronous NOR, SRAM or ROM accesses
+ - It may assume a value between Min_Data = 2 and Max_Data = 17 in NOR Flash memories
+ with synchronous burst mode enable */
+
+ uint32_t AccessMode; /*!< Specifies the asynchronous access mode.
+ This parameter can be a value of @ref FMC_Access_Mode */
+}FMC_NORSRAM_TimingTypeDef;
+
+/**
+ * @brief FMC NAND Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t NandBank; /*!< Specifies the NAND memory device that will be used.
+ This parameter can be a value of @ref FMC_NAND_Bank */
+
+ uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory device.
+ This parameter can be any value of @ref FMC_Wait_feature */
+
+ uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be any value of @ref FMC_NAND_Data_Width */
+
+ uint32_t EccComputation; /*!< Enables or disables the ECC computation.
+ This parameter can be any value of @ref FMC_ECC */
+
+ uint32_t ECCPageSize; /*!< Defines the page size for the extended ECC.
+ This parameter can be any value of @ref FMC_ECC_Page_Size */
+
+ uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+}FMC_NAND_InitTypeDef;
+
+/**
+ * @brief FMC NAND/PCCARD Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t SetupTime; /*!< Defines the number of HCLK cycles to setup address before
+ the command assertion for NAND-Flash read or write access
+ to common/Attribute or I/O memory space (depending on
+ the memory space timing to be configured).
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the
+ command for NAND-Flash read or write access to
+ common/Attribute or I/O memory space (depending on the
+ memory space timing to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address
+ (and data for write access) after the command de-assertion
+ for NAND-Flash read or write access to common/Attribute
+ or I/O memory space (depending on the memory space timing
+ to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the
+ data bus is kept in HiZ after the start of a NAND-Flash
+ write access to common/Attribute or I/O memory space (depending
+ on the memory space timing to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+}FMC_NAND_PCC_TimingTypeDef;
+
+/**
+ * @brief FMC NAND Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the PCCARD Memory device.
+ This parameter can be any value of @ref FMC_Wait_feature */
+
+ uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+}FMC_PCCARD_InitTypeDef;
+
+/**
+ * @brief FMC SDRAM Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t SDBank; /*!< Specifies the SDRAM memory device that will be used.
+ This parameter can be a value of @ref FMC_SDRAM_Bank */
+
+ uint32_t ColumnBitsNumber; /*!< Defines the number of bits of column address.
+ This parameter can be a value of @ref FMC_SDRAM_Column_Bits_number. */
+
+ uint32_t RowBitsNumber; /*!< Defines the number of bits of column address.
+ This parameter can be a value of @ref FMC_SDRAM_Row_Bits_number. */
+
+ uint32_t MemoryDataWidth; /*!< Defines the memory device width.
+ This parameter can be a value of @ref FMC_SDRAM_Memory_Bus_Width. */
+
+ uint32_t InternalBankNumber; /*!< Defines the number of the device's internal banks.
+ This parameter can be of @ref FMC_SDRAM_Internal_Banks_Number. */
+
+ uint32_t CASLatency; /*!< Defines the SDRAM CAS latency in number of memory clock cycles.
+ This parameter can be a value of @ref FMC_SDRAM_CAS_Latency. */
+
+ uint32_t WriteProtection; /*!< Enables the SDRAM device to be accessed in write mode.
+ This parameter can be a value of @ref FMC_SDRAM_Write_Protection. */
+
+ uint32_t SDClockPeriod; /*!< Define the SDRAM Clock Period for both SDRAM devices and they allow
+ to disable the clock before changing frequency.
+ This parameter can be a value of @ref FMC_SDRAM_Clock_Period. */
+
+ uint32_t ReadBurst; /*!< This bit enable the SDRAM controller to anticipate the next read
+ commands during the CAS latency and stores data in the Read FIFO.
+ This parameter can be a value of @ref FMC_SDRAM_Read_Burst. */
+
+ uint32_t ReadPipeDelay; /*!< Define the delay in system clock cycles on read data path.
+ This parameter can be a value of @ref FMC_SDRAM_Read_Pipe_Delay. */
+}FMC_SDRAM_InitTypeDef;
+
+/**
+ * @brief FMC SDRAM Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t LoadToActiveDelay; /*!< Defines the delay between a Load Mode Register command and
+ an active or Refresh command in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t ExitSelfRefreshDelay; /*!< Defines the delay from releasing the self refresh command to
+ issuing the Activate command in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t SelfRefreshTime; /*!< Defines the minimum Self Refresh period in number of memory clock
+ cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t RowCycleDelay; /*!< Defines the delay between the Refresh command and the Activate command
+ and the delay between two consecutive Refresh commands in number of
+ memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t WriteRecoveryTime; /*!< Defines the Write recovery Time in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t RPDelay; /*!< Defines the delay between a Precharge Command and an other command
+ in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t RCDDelay; /*!< Defines the delay between the Activate Command and a Read/Write
+ command in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+}FMC_SDRAM_TimingTypeDef;
+
+/**
+ * @brief SDRAM command parameters structure definition
+ */
+typedef struct
+{
+ uint32_t CommandMode; /*!< Defines the command issued to the SDRAM device.
+ This parameter can be a value of @ref FMC_SDRAM_Command_Mode. */
+
+ uint32_t CommandTarget; /*!< Defines which device (1 or 2) the command will be issued to.
+ This parameter can be a value of @ref FMC_SDRAM_Command_Target. */
+
+ uint32_t AutoRefreshNumber; /*!< Defines the number of consecutive auto refresh command issued
+ in auto refresh mode.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+ uint32_t ModeRegisterDefinition; /*!< Defines the SDRAM Mode register content */
+}FMC_SDRAM_CommandTypeDef;
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup FMC_LL_Private_Constants FMC Private Constants
+ * @{
+ */
+
+/** @defgroup FMC_LL_NOR_SRAM_Controller FMC NOR/SRAM Controller
+ * @{
+ */
+/** @defgroup FMC_NORSRAM_Bank FMC NOR/SRAM Bank
+ * @{
+ */
+#define FMC_NORSRAM_BANK1 ((uint32_t)0x00000000)
+#define FMC_NORSRAM_BANK2 ((uint32_t)0x00000002)
+#define FMC_NORSRAM_BANK3 ((uint32_t)0x00000004)
+#define FMC_NORSRAM_BANK4 ((uint32_t)0x00000006)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Data_Address_Bus_Multiplexing FMC Data Address Bus Multiplexing
+ * @{
+ */
+#define FMC_DATA_ADDRESS_MUX_DISABLE ((uint32_t)0x00000000)
+#define FMC_DATA_ADDRESS_MUX_ENABLE ((uint32_t)0x00000002)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Memory_Type FMC Memory Type
+ * @{
+ */
+#define FMC_MEMORY_TYPE_SRAM ((uint32_t)0x00000000)
+#define FMC_MEMORY_TYPE_PSRAM ((uint32_t)0x00000004)
+#define FMC_MEMORY_TYPE_NOR ((uint32_t)0x00000008)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NORSRAM_Data_Width FMC NORSRAM Data Width
+ * @{
+ */
+#define FMC_NORSRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000)
+#define FMC_NORSRAM_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010)
+#define FMC_NORSRAM_MEM_BUS_WIDTH_32 ((uint32_t)0x00000020)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NORSRAM_Flash_Access FMC NOR/SRAM Flash Access
+ * @{
+ */
+#define FMC_NORSRAM_FLASH_ACCESS_ENABLE ((uint32_t)0x00000040)
+#define FMC_NORSRAM_FLASH_ACCESS_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Burst_Access_Mode FMC Burst Access Mode
+ * @{
+ */
+#define FMC_BURST_ACCESS_MODE_DISABLE ((uint32_t)0x00000000)
+#define FMC_BURST_ACCESS_MODE_ENABLE ((uint32_t)0x00000100)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_Signal_Polarity FMC Wait Signal Polarity
+ * @{
+ */
+#define FMC_WAIT_SIGNAL_POLARITY_LOW ((uint32_t)0x00000000)
+#define FMC_WAIT_SIGNAL_POLARITY_HIGH ((uint32_t)0x00000200)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wrap_Mode FMC Wrap Mode
+ * @{
+ */
+/** @note This mode is not available for the STM32F446xx devices
+ */
+#define FMC_WRAP_MODE_DISABLE ((uint32_t)0x00000000)
+#define FMC_WRAP_MODE_ENABLE ((uint32_t)0x00000400)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_Timing FMC Wait Timing
+ * @{
+ */
+#define FMC_WAIT_TIMING_BEFORE_WS ((uint32_t)0x00000000)
+#define FMC_WAIT_TIMING_DURING_WS ((uint32_t)0x00000800)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Write_Operation FMC Write Operation
+ * @{
+ */
+#define FMC_WRITE_OPERATION_DISABLE ((uint32_t)0x00000000)
+#define FMC_WRITE_OPERATION_ENABLE ((uint32_t)0x00001000)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_Signal FMC Wait Signal
+ * @{
+ */
+#define FMC_WAIT_SIGNAL_DISABLE ((uint32_t)0x00000000)
+#define FMC_WAIT_SIGNAL_ENABLE ((uint32_t)0x00002000)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Extended_Mode FMC Extended Mode
+ * @{
+ */
+#define FMC_EXTENDED_MODE_DISABLE ((uint32_t)0x00000000)
+#define FMC_EXTENDED_MODE_ENABLE ((uint32_t)0x00004000)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_AsynchronousWait FMC Asynchronous Wait
+ * @{
+ */
+#define FMC_ASYNCHRONOUS_WAIT_DISABLE ((uint32_t)0x00000000)
+#define FMC_ASYNCHRONOUS_WAIT_ENABLE ((uint32_t)0x00008000)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Page_Size FMC Page Size
+ * @note These values are available only for the STM32F446xx devices.
+ * @{
+ */
+#define FMC_PAGE_SIZE_NONE ((uint32_t)0x00000000)
+#define FMC_PAGE_SIZE_128 ((uint32_t)FMC_BCR1_CPSIZE_0)
+#define FMC_PAGE_SIZE_256 ((uint32_t)FMC_BCR1_CPSIZE_1)
+#define FMC_PAGE_SIZE_1024 ((uint32_t)FMC_BCR1_CPSIZE_2)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Write_FIFO FMC Write FIFO
+ * @note These values are available only for the STM32F446xx devices.
+ * @{
+ */
+#define FMC_WRITE_FIFO_DISABLE ((uint32_t)0x00000000)
+#define FMC_WRITE_FIFO_ENABLE ((uint32_t)FMC_BCR1_WFDIS)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Write_Burst FMC Write Burst
+ * @{
+ */
+#define FMC_WRITE_BURST_DISABLE ((uint32_t)0x00000000)
+#define FMC_WRITE_BURST_ENABLE ((uint32_t)0x00080000)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Continous_Clock FMC Continuous Clock
+ * @{
+ */
+#define FMC_CONTINUOUS_CLOCK_SYNC_ONLY ((uint32_t)0x00000000)
+#define FMC_CONTINUOUS_CLOCK_SYNC_ASYNC ((uint32_t)0x00100000)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Access_Mode FMC Access Mode
+ * @{
+ */
+#define FMC_ACCESS_MODE_A ((uint32_t)0x00000000)
+#define FMC_ACCESS_MODE_B ((uint32_t)0x10000000)
+#define FMC_ACCESS_MODE_C ((uint32_t)0x20000000)
+#define FMC_ACCESS_MODE_D ((uint32_t)0x30000000)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_NAND_Controller FMC NAND Controller
+ * @{
+ */
+/** @defgroup FMC_NAND_Bank FMC NAND Bank
+ * @{
+ */
+#define FMC_NAND_BANK2 ((uint32_t)0x00000010)
+#define FMC_NAND_BANK3 ((uint32_t)0x00000100)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_feature FMC Wait feature
+ * @{
+ */
+#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE ((uint32_t)0x00000000)
+#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE ((uint32_t)0x00000002)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_PCR_Memory_Type FMC PCR Memory Type
+ * @{
+ */
+#define FMC_PCR_MEMORY_TYPE_PCCARD ((uint32_t)0x00000000)
+#define FMC_PCR_MEMORY_TYPE_NAND ((uint32_t)0x00000008)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NAND_Data_Width FMC NAND Data Width
+ * @{
+ */
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000)
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_ECC FMC ECC
+ * @{
+ */
+#define FMC_NAND_ECC_DISABLE ((uint32_t)0x00000000)
+#define FMC_NAND_ECC_ENABLE ((uint32_t)0x00000040)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_ECC_Page_Size FMC ECC Page Size
+ * @{
+ */
+#define FMC_NAND_ECC_PAGE_SIZE_256BYTE ((uint32_t)0x00000000)
+#define FMC_NAND_ECC_PAGE_SIZE_512BYTE ((uint32_t)0x00020000)
+#define FMC_NAND_ECC_PAGE_SIZE_1024BYTE ((uint32_t)0x00040000)
+#define FMC_NAND_ECC_PAGE_SIZE_2048BYTE ((uint32_t)0x00060000)
+#define FMC_NAND_ECC_PAGE_SIZE_4096BYTE ((uint32_t)0x00080000)
+#define FMC_NAND_ECC_PAGE_SIZE_8192BYTE ((uint32_t)0x000A0000)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_SDRAM_Controller FMC SDRAM Controller
+ * @{
+ */
+/** @defgroup FMC_SDRAM_Bank FMC SDRAM Bank
+ * @{
+ */
+#define FMC_SDRAM_BANK1 ((uint32_t)0x00000000)
+#define FMC_SDRAM_BANK2 ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Column_Bits_number FMC SDRAM Column Bits number
+ * @{
+ */
+#define FMC_SDRAM_COLUMN_BITS_NUM_8 ((uint32_t)0x00000000)
+#define FMC_SDRAM_COLUMN_BITS_NUM_9 ((uint32_t)0x00000001)
+#define FMC_SDRAM_COLUMN_BITS_NUM_10 ((uint32_t)0x00000002)
+#define FMC_SDRAM_COLUMN_BITS_NUM_11 ((uint32_t)0x00000003)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Row_Bits_number FMC SDRAM Row Bits number
+ * @{
+ */
+#define FMC_SDRAM_ROW_BITS_NUM_11 ((uint32_t)0x00000000)
+#define FMC_SDRAM_ROW_BITS_NUM_12 ((uint32_t)0x00000004)
+#define FMC_SDRAM_ROW_BITS_NUM_13 ((uint32_t)0x00000008)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Memory_Bus_Width FMC SDRAM Memory Bus Width
+ * @{
+ */
+#define FMC_SDRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000)
+#define FMC_SDRAM_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010)
+#define FMC_SDRAM_MEM_BUS_WIDTH_32 ((uint32_t)0x00000020)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Internal_Banks_Number FMC SDRAM Internal Banks Number
+ * @{
+ */
+#define FMC_SDRAM_INTERN_BANKS_NUM_2 ((uint32_t)0x00000000)
+#define FMC_SDRAM_INTERN_BANKS_NUM_4 ((uint32_t)0x00000040)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_CAS_Latency FMC SDRAM CAS Latency
+ * @{
+ */
+#define FMC_SDRAM_CAS_LATENCY_1 ((uint32_t)0x00000080)
+#define FMC_SDRAM_CAS_LATENCY_2 ((uint32_t)0x00000100)
+#define FMC_SDRAM_CAS_LATENCY_3 ((uint32_t)0x00000180)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Write_Protection FMC SDRAM Write Protection
+ * @{
+ */
+#define FMC_SDRAM_WRITE_PROTECTION_DISABLE ((uint32_t)0x00000000)
+#define FMC_SDRAM_WRITE_PROTECTION_ENABLE ((uint32_t)0x00000200)
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Clock_Period FMC SDRAM Clock Period
+ * @{
+ */
+#define FMC_SDRAM_CLOCK_DISABLE ((uint32_t)0x00000000)
+#define FMC_SDRAM_CLOCK_PERIOD_2 ((uint32_t)0x00000800)
+#define FMC_SDRAM_CLOCK_PERIOD_3 ((uint32_t)0x00000C00)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Read_Burst FMC SDRAM Read Burst
+ * @{
+ */
+#define FMC_SDRAM_RBURST_DISABLE ((uint32_t)0x00000000)
+#define FMC_SDRAM_RBURST_ENABLE ((uint32_t)0x00001000)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Read_Pipe_Delay FMC SDRAM Read Pipe Delay
+ * @{
+ */
+#define FMC_SDRAM_RPIPE_DELAY_0 ((uint32_t)0x00000000)
+#define FMC_SDRAM_RPIPE_DELAY_1 ((uint32_t)0x00002000)
+#define FMC_SDRAM_RPIPE_DELAY_2 ((uint32_t)0x00004000)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Command_Mode FMC SDRAM Command Mode
+ * @{
+ */
+#define FMC_SDRAM_CMD_NORMAL_MODE ((uint32_t)0x00000000)
+#define FMC_SDRAM_CMD_CLK_ENABLE ((uint32_t)0x00000001)
+#define FMC_SDRAM_CMD_PALL ((uint32_t)0x00000002)
+#define FMC_SDRAM_CMD_AUTOREFRESH_MODE ((uint32_t)0x00000003)
+#define FMC_SDRAM_CMD_LOAD_MODE ((uint32_t)0x00000004)
+#define FMC_SDRAM_CMD_SELFREFRESH_MODE ((uint32_t)0x00000005)
+#define FMC_SDRAM_CMD_POWERDOWN_MODE ((uint32_t)0x00000006)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Command_Target FMC SDRAM Command Target
+ * @{
+ */
+#define FMC_SDRAM_CMD_TARGET_BANK2 FMC_SDCMR_CTB2
+#define FMC_SDRAM_CMD_TARGET_BANK1 FMC_SDCMR_CTB1
+#define FMC_SDRAM_CMD_TARGET_BANK1_2 ((uint32_t)0x00000018)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Mode_Status FMC SDRAM Mode Status
+ * @{
+ */
+#define FMC_SDRAM_NORMAL_MODE ((uint32_t)0x00000000)
+#define FMC_SDRAM_SELF_REFRESH_MODE FMC_SDSR_MODES1_0
+#define FMC_SDRAM_POWER_DOWN_MODE FMC_SDSR_MODES1_1
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_Interrupt_definition FMC Interrupt definition
+ * @{
+ */
+#define FMC_IT_RISING_EDGE ((uint32_t)0x00000008)
+#define FMC_IT_LEVEL ((uint32_t)0x00000010)
+#define FMC_IT_FALLING_EDGE ((uint32_t)0x00000020)
+#define FMC_IT_REFRESH_ERROR ((uint32_t)0x00004000)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_Flag_definition FMC Flag definition
+ * @{
+ */
+#define FMC_FLAG_RISING_EDGE ((uint32_t)0x00000001)
+#define FMC_FLAG_LEVEL ((uint32_t)0x00000002)
+#define FMC_FLAG_FALLING_EDGE ((uint32_t)0x00000004)
+#define FMC_FLAG_FEMPT ((uint32_t)0x00000040)
+#define FMC_SDRAM_FLAG_REFRESH_IT FMC_SDSR_RE
+#define FMC_SDRAM_FLAG_BUSY FMC_SDSR_BUSY
+#define FMC_SDRAM_FLAG_REFRESH_ERROR FMC_SDRTR_CRE
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_Alias_definition FMC Alias definition
+ * @{
+ */
+#if defined(STM32F446xx)
+ #define FMC_NAND_TypeDef FMC_Bank3_TypeDef
+#else
+ #define FMC_NAND_TypeDef FMC_Bank2_3_TypeDef
+ #define FMC_PCCARD_TypeDef FMC_Bank4_TypeDef
+#endif /* defined(STM32F446xx) */
+ #define FMC_NORSRAM_TypeDef FMC_Bank1_TypeDef
+ #define FMC_NORSRAM_EXTENDED_TypeDef FMC_Bank1E_TypeDef
+ #define FMC_SDRAM_TypeDef FMC_Bank5_6_TypeDef
+
+
+#if defined(STM32F446xx)
+ #define FMC_NAND_DEVICE FMC_Bank3
+#else
+ #define FMC_NAND_DEVICE FMC_Bank2_3
+ #define FMC_PCCARD_DEVICE FMC_Bank4
+#endif /* defined(STM32F446xx) */
+ #define FMC_NORSRAM_DEVICE FMC_Bank1
+ #define FMC_NORSRAM_EXTENDED_DEVICE FMC_Bank1E
+ #define FMC_SDRAM_DEVICE FMC_Bank5_6
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup FMC_LL_Private_Macros FMC Private Macros
+ * @{
+ */
+
+/** @defgroup FMC_LL_NOR_Macros FMC NOR/SRAM Macros
+ * @brief macros to handle NOR device enable/disable and read/write operations
+ * @{
+ */
+/**
+ * @brief Enable the NORSRAM device access.
+ * @param __INSTANCE__: FMC_NORSRAM Instance
+ * @param __BANK__: FMC_NORSRAM Bank
+ * @retval None
+ */
+#define __FMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] |= FMC_BCR1_MBKEN)
+
+/**
+ * @brief Disable the NORSRAM device access.
+ * @param __INSTANCE__: FMC_NORSRAM Instance
+ * @param __BANK__: FMC_NORSRAM Bank
+ * @retval None
+ */
+#define __FMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] &= ~FMC_BCR1_MBKEN)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_NAND_Macros FMC NAND Macros
+ * @brief macros to handle NAND device enable/disable
+ * @{
+ */
+#if defined(STM32F446xx)
+/**
+ * @brief Enable the NAND device access.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @retval None
+ */
+#define __FMC_NAND_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->PCR |= FMC_PCR_PBKEN)
+
+/**
+ * @brief Disable the NAND device access.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @retval None
+ */
+#define __FMC_NAND_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->PCR &= ~FMC_PCR_PBKEN)
+#else /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */
+/**
+ * @brief Enable the NAND device access.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @retval None
+ */
+#define __FMC_NAND_ENABLE(__INSTANCE__, __BANK__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 |= FMC_PCR2_PBKEN): \
+ ((__INSTANCE__)->PCR3 |= FMC_PCR3_PBKEN))
+
+/**
+ * @brief Disable the NAND device access.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @retval None
+ */
+#define __FMC_NAND_DISABLE(__INSTANCE__, __BANK__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 &= ~FMC_PCR2_PBKEN): \
+ ((__INSTANCE__)->PCR3 &= ~FMC_PCR3_PBKEN))
+
+#endif /* defined(STM32F446xx)*/
+/**
+ * @}
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/** @defgroup FMC_LL_PCCARD_Macros FMC PCCARD Macros
+ * @brief macros to handle SRAM read/write operations
+ * @{
+ */
+/**
+ * @brief Enable the PCCARD device access.
+ * @param __INSTANCE__: FMC_PCCARD Instance
+ * @retval None
+ */
+#define __FMC_PCCARD_ENABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 |= FMC_PCR4_PBKEN)
+
+/**
+ * @brief Disable the PCCARD device access.
+ * @param __INSTANCE__: FMC_PCCARD Instance
+ * @retval None
+ */
+#define __FMC_PCCARD_DISABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 &= ~FMC_PCR4_PBKEN)
+/**
+ * @}
+ */
+#endif /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */
+
+/** @defgroup FMC_LL_Flag_Interrupt_Macros FMC Flag&Interrupt Macros
+ * @brief macros to handle FMC flags and interrupts
+ * @{
+ */
+#if defined(STM32F446xx)
+/**
+ * @brief Enable the NAND device interrupt.
+ * @param __INSTANCE__: FMC_NAND instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __INTERRUPT__: FMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) ((__INSTANCE__)->SR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the NAND device interrupt.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __INTERRUPT__: FMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) ((__INSTANCE__)->SR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Get flag status of the NAND device.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __FLAG__: FMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__INSTANCE__)->SR &(__FLAG__)) == (__FLAG__))
+/**
+ * @brief Clear flag status of the NAND device.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __FLAG__: FMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval None
+ */
+#define __FMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__) ((__INSTANCE__)->SR &= ~(__FLAG__))
+#else /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */
+/**
+ * @brief Enable the NAND device interrupt.
+ * @param __INSTANCE__: FMC_NAND instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __INTERRUPT__: FMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 |= (__INTERRUPT__)): \
+ ((__INSTANCE__)->SR3 |= (__INTERRUPT__)))
+
+/**
+ * @brief Disable the NAND device interrupt.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __INTERRUPT__: FMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__INTERRUPT__)): \
+ ((__INSTANCE__)->SR3 &= ~(__INTERRUPT__)))
+
+/**
+ * @brief Get flag status of the NAND device.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __FLAG__: FMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FMC_NAND_BANK2)? (((__INSTANCE__)->SR2 &(__FLAG__)) == (__FLAG__)): \
+ (((__INSTANCE__)->SR3 &(__FLAG__)) == (__FLAG__)))
+/**
+ * @brief Clear flag status of the NAND device.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __FLAG__: FMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval None
+ */
+#define __FMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__FLAG__)): \
+ ((__INSTANCE__)->SR3 &= ~(__FLAG__)))
+#endif /* defined(STM32F446xx) */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/**
+ * @brief Enable the PCCARD device interrupt.
+ * @param __INSTANCE__: FMC_PCCARD instance
+ * @param __INTERRUPT__: FMC_PCCARD interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_PCCARD_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the PCCARD device interrupt.
+ * @param __INSTANCE__: FMC_PCCARD instance
+ * @param __INTERRUPT__: FMC_PCCARD interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_PCCARD_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 &= ~(__INTERRUPT__))
+
+/**
+ * @brief Get flag status of the PCCARD device.
+ * @param __INSTANCE__: FMC_PCCARD instance
+ * @param __FLAG__: FMC_PCCARD flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FMC_PCCARD_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SR4 &(__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear flag status of the PCCARD device.
+ * @param __INSTANCE__: FMC_PCCARD instance
+ * @param __FLAG__: FMC_PCCARD flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval None
+ */
+#define __FMC_PCCARD_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SR4 &= ~(__FLAG__))
+#endif /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */
+
+/**
+ * @brief Enable the SDRAM device interrupt.
+ * @param __INSTANCE__: FMC_SDRAM instance
+ * @param __INTERRUPT__: FMC_SDRAM interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error
+ * @retval None
+ */
+#define __FMC_SDRAM_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SDRTR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the SDRAM device interrupt.
+ * @param __INSTANCE__: FMC_SDRAM instance
+ * @param __INTERRUPT__: FMC_SDRAM interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error
+ * @retval None
+ */
+#define __FMC_SDRAM_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SDRTR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Get flag status of the SDRAM device.
+ * @param __INSTANCE__: FMC_SDRAM instance
+ * @param __FLAG__: FMC_SDRAM flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_SDRAM_FLAG_REFRESH_IT: Interrupt refresh error.
+ * @arg FMC_SDRAM_FLAG_BUSY: SDRAM busy flag.
+ * @arg FMC_SDRAM_FLAG_REFRESH_ERROR: Refresh error flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FMC_SDRAM_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SDSR &(__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear flag status of the SDRAM device.
+ * @param __INSTANCE__: FMC_SDRAM instance
+ * @param __FLAG__: FMC_SDRAM flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_SDRAM_FLAG_REFRESH_ERROR
+ * @retval None
+ */
+#define __FMC_SDRAM_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SDRTR |= (__FLAG__))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_Assert_Macros FSMC Assert Macros
+ * @{
+ */
+#define IS_FMC_NORSRAM_BANK(BANK) (((BANK) == FMC_NORSRAM_BANK1) || \
+ ((BANK) == FMC_NORSRAM_BANK2) || \
+ ((BANK) == FMC_NORSRAM_BANK3) || \
+ ((BANK) == FMC_NORSRAM_BANK4))
+
+#define IS_FMC_MUX(__MUX__) (((__MUX__) == FMC_DATA_ADDRESS_MUX_DISABLE) || \
+ ((__MUX__) == FMC_DATA_ADDRESS_MUX_ENABLE))
+
+#define IS_FMC_MEMORY(__MEMORY__) (((__MEMORY__) == FMC_MEMORY_TYPE_SRAM) || \
+ ((__MEMORY__) == FMC_MEMORY_TYPE_PSRAM)|| \
+ ((__MEMORY__) == FMC_MEMORY_TYPE_NOR))
+
+#define IS_FMC_NORSRAM_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_8) || \
+ ((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_16) || \
+ ((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_32))
+
+#define IS_FMC_ACCESS_MODE(__MODE__) (((__MODE__) == FMC_ACCESS_MODE_A) || \
+ ((__MODE__) == FMC_ACCESS_MODE_B) || \
+ ((__MODE__) == FMC_ACCESS_MODE_C) || \
+ ((__MODE__) == FMC_ACCESS_MODE_D))
+
+#define IS_FMC_NAND_BANK(BANK) (((BANK) == FMC_NAND_BANK2) || \
+ ((BANK) == FMC_NAND_BANK3))
+
+#define IS_FMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FMC_NAND_PCC_WAIT_FEATURE_DISABLE) || \
+ ((FEATURE) == FMC_NAND_PCC_WAIT_FEATURE_ENABLE))
+
+#define IS_FMC_NAND_MEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_NAND_PCC_MEM_BUS_WIDTH_8) || \
+ ((WIDTH) == FMC_NAND_PCC_MEM_BUS_WIDTH_16))
+
+#define IS_FMC_ECC_STATE(STATE) (((STATE) == FMC_NAND_ECC_DISABLE) || \
+ ((STATE) == FMC_NAND_ECC_ENABLE))
+
+#define IS_FMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FMC_NAND_ECC_PAGE_SIZE_256BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_512BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_8192BYTE))
+
+#define IS_FMC_TCLR_TIME(TIME) ((TIME) <= 255)
+
+#define IS_FMC_TAR_TIME(TIME) ((TIME) <= 255)
+
+#define IS_FMC_SETUP_TIME(TIME) ((TIME) <= 255)
+
+#define IS_FMC_WAIT_TIME(TIME) ((TIME) <= 255)
+
+#define IS_FMC_HOLD_TIME(TIME) ((TIME) <= 255)
+
+#define IS_FMC_HIZ_TIME(TIME) ((TIME) <= 255)
+
+#define IS_FMC_NORSRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NORSRAM_DEVICE)
+
+#define IS_FMC_NORSRAM_EXTENDED_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NORSRAM_EXTENDED_DEVICE)
+
+#define IS_FMC_NAND_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NAND_DEVICE)
+
+#define IS_FMC_PCCARD_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_PCCARD_DEVICE)
+
+#define IS_FMC_BURSTMODE(__STATE__) (((__STATE__) == FMC_BURST_ACCESS_MODE_DISABLE) || \
+ ((__STATE__) == FMC_BURST_ACCESS_MODE_ENABLE))
+
+#define IS_FMC_WAIT_POLARITY(__POLARITY__) (((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_LOW) || \
+ ((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_HIGH))
+
+#if !defined (STM32F446xx)
+#define IS_FMC_WRAP_MODE(__MODE__) (((__MODE__) == FMC_WRAP_MODE_DISABLE) || \
+ ((__MODE__) == FMC_WRAP_MODE_ENABLE))
+#endif /* !defined (STM32F446xx) */
+
+#define IS_FMC_WAIT_SIGNAL_ACTIVE(__ACTIVE__) (((__ACTIVE__) == FMC_WAIT_TIMING_BEFORE_WS) || \
+ ((__ACTIVE__) == FMC_WAIT_TIMING_DURING_WS))
+
+#define IS_FMC_WRITE_OPERATION(__OPERATION__) (((__OPERATION__) == FMC_WRITE_OPERATION_DISABLE) || \
+ ((__OPERATION__) == FMC_WRITE_OPERATION_ENABLE))
+
+#define IS_FMC_WAITE_SIGNAL(__SIGNAL__) (((__SIGNAL__) == FMC_WAIT_SIGNAL_DISABLE) || \
+ ((__SIGNAL__) == FMC_WAIT_SIGNAL_ENABLE))
+
+#define IS_FMC_EXTENDED_MODE(__MODE__) (((__MODE__) == FMC_EXTENDED_MODE_DISABLE) || \
+ ((__MODE__) == FMC_EXTENDED_MODE_ENABLE))
+
+#define IS_FMC_ASYNWAIT(__STATE__) (((__STATE__) == FMC_ASYNCHRONOUS_WAIT_DISABLE) || \
+ ((__STATE__) == FMC_ASYNCHRONOUS_WAIT_ENABLE))
+
+#define IS_FMC_WRITE_BURST(__BURST__) (((__BURST__) == FMC_WRITE_BURST_DISABLE) || \
+ ((__BURST__) == FMC_WRITE_BURST_ENABLE))
+
+#define IS_FMC_CONTINOUS_CLOCK(CCLOCK) (((CCLOCK) == FMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \
+ ((CCLOCK) == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC))
+
+#define IS_FMC_ADDRESS_SETUP_TIME(__TIME__) ((__TIME__) <= 15)
+
+#define IS_FMC_ADDRESS_HOLD_TIME(__TIME__) (((__TIME__) > 0) && ((__TIME__) <= 15))
+
+#define IS_FMC_DATASETUP_TIME(__TIME__) (((__TIME__) > 0) && ((__TIME__) <= 255))
+
+#define IS_FMC_TURNAROUND_TIME(__TIME__) ((__TIME__) <= 15)
+
+#define IS_FMC_DATA_LATENCY(__LATENCY__) (((__LATENCY__) > 1) && ((__LATENCY__) <= 17))
+
+#define IS_FMC_CLK_DIV(DIV) (((DIV) > 1) && ((DIV) <= 16))
+
+#define IS_FMC_SDRAM_BANK(BANK) (((BANK) == FMC_SDRAM_BANK1) || \
+ ((BANK) == FMC_SDRAM_BANK2))
+
+#define IS_FMC_COLUMNBITS_NUMBER(COLUMN) (((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_8) || \
+ ((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_9) || \
+ ((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_10) || \
+ ((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_11))
+
+#define IS_FMC_ROWBITS_NUMBER(ROW) (((ROW) == FMC_SDRAM_ROW_BITS_NUM_11) || \
+ ((ROW) == FMC_SDRAM_ROW_BITS_NUM_12) || \
+ ((ROW) == FMC_SDRAM_ROW_BITS_NUM_13))
+
+#define IS_FMC_SDMEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_8) || \
+ ((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_16) || \
+ ((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_32))
+
+#define IS_FMC_INTERNALBANK_NUMBER(NUMBER) (((NUMBER) == FMC_SDRAM_INTERN_BANKS_NUM_2) || \
+ ((NUMBER) == FMC_SDRAM_INTERN_BANKS_NUM_4))
+
+
+#define IS_FMC_CAS_LATENCY(LATENCY) (((LATENCY) == FMC_SDRAM_CAS_LATENCY_1) || \
+ ((LATENCY) == FMC_SDRAM_CAS_LATENCY_2) || \
+ ((LATENCY) == FMC_SDRAM_CAS_LATENCY_3))
+
+#define IS_FMC_SDCLOCK_PERIOD(PERIOD) (((PERIOD) == FMC_SDRAM_CLOCK_DISABLE) || \
+ ((PERIOD) == FMC_SDRAM_CLOCK_PERIOD_2) || \
+ ((PERIOD) == FMC_SDRAM_CLOCK_PERIOD_3))
+
+#define IS_FMC_READ_BURST(RBURST) (((RBURST) == FMC_SDRAM_RBURST_DISABLE) || \
+ ((RBURST) == FMC_SDRAM_RBURST_ENABLE))
+
+
+#define IS_FMC_READPIPE_DELAY(DELAY) (((DELAY) == FMC_SDRAM_RPIPE_DELAY_0) || \
+ ((DELAY) == FMC_SDRAM_RPIPE_DELAY_1) || \
+ ((DELAY) == FMC_SDRAM_RPIPE_DELAY_2))
+
+#define IS_FMC_LOADTOACTIVE_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16))
+
+#define IS_FMC_EXITSELFREFRESH_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16))
+
+#define IS_FMC_SELFREFRESH_TIME(TIME) (((TIME) > 0) && ((TIME) <= 16))
+
+#define IS_FMC_ROWCYCLE_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16))
+
+#define IS_FMC_WRITE_RECOVERY_TIME(TIME) (((TIME) > 0) && ((TIME) <= 16))
+
+#define IS_FMC_RP_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16))
+
+#define IS_FMC_RCD_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16))
+
+#define IS_FMC_COMMAND_MODE(COMMAND) (((COMMAND) == FMC_SDRAM_CMD_NORMAL_MODE) || \
+ ((COMMAND) == FMC_SDRAM_CMD_CLK_ENABLE) || \
+ ((COMMAND) == FMC_SDRAM_CMD_PALL) || \
+ ((COMMAND) == FMC_SDRAM_CMD_AUTOREFRESH_MODE) || \
+ ((COMMAND) == FMC_SDRAM_CMD_LOAD_MODE) || \
+ ((COMMAND) == FMC_SDRAM_CMD_SELFREFRESH_MODE) || \
+ ((COMMAND) == FMC_SDRAM_CMD_POWERDOWN_MODE))
+
+#define IS_FMC_COMMAND_TARGET(TARGET) (((TARGET) == FMC_SDRAM_CMD_TARGET_BANK1) || \
+ ((TARGET) == FMC_SDRAM_CMD_TARGET_BANK2) || \
+ ((TARGET) == FMC_SDRAM_CMD_TARGET_BANK1_2))
+
+#define IS_FMC_AUTOREFRESH_NUMBER(NUMBER) (((NUMBER) > 0) && ((NUMBER) <= 16))
+
+#define IS_FMC_MODE_REGISTER(CONTENT) ((CONTENT) <= 8191)
+
+#define IS_FMC_REFRESH_RATE(RATE) ((RATE) <= 8191)
+
+#define IS_FMC_SDRAM_DEVICE(INSTANCE) ((INSTANCE) == FMC_SDRAM_DEVICE)
+
+#define IS_FMC_WRITE_PROTECTION(WRITE) (((WRITE) == FMC_SDRAM_WRITE_PROTECTION_DISABLE) || \
+ ((WRITE) == FMC_SDRAM_WRITE_PROTECTION_ENABLE))
+
+#if defined (STM32F446xx)
+#define IS_FMC_PAGESIZE(SIZE) (((SIZE) == FMC_PAGE_SIZE_NONE) || \
+ ((SIZE) == FMC_PAGE_SIZE_128) || \
+ ((SIZE) == FMC_PAGE_SIZE_256) || \
+ ((SIZE) == FMC_PAGE_SIZE_1024))
+
+#define IS_FMC_WRITE_FIFO(FIFO) (((FIFO) == FMC_WRITE_FIFO_DISABLE) || \
+ ((FIFO) == FMC_WRITE_FIFO_ENABLE))
+#endif /* defined (STM32F446xx) */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup FMC_LL_Private_Functions FMC LL Private Functions
+ * @{
+ */
+
+/** @defgroup FMC_LL_NORSRAM NOR SRAM
+ * @{
+ */
+/** @defgroup FMC_LL_NORSRAM_Private_Functions_Group1 NOR SRAM Initialization/de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode);
+HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank);
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_NORSRAM_Private_Functions_Group2 NOR SRAM Control functions
+ * @{
+ */
+HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_NAND NAND
+ * @{
+ */
+/** @defgroup FMC_LL_NAND_Private_Functions_Group1 NAND Initialization/de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank);
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_NAND_Private_Functions_Group2 NAND Control functions
+ * @{
+ */
+HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout);
+
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/** @defgroup FMC_LL_PCCARD PCCARD
+ * @{
+ */
+/** @defgroup FMC_LL_PCCARD_Private_Functions_Group1 PCCARD Initialization/de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef FMC_PCCARD_Init(FMC_PCCARD_TypeDef *Device, FMC_PCCARD_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_PCCARD_CommonSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FMC_PCCARD_AttributeSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FMC_PCCARD_IOSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FMC_PCCARD_DeInit(FMC_PCCARD_TypeDef *Device);
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/** @defgroup FMC_LL_SDRAM SDRAM
+ * @{
+ */
+/** @defgroup FMC_LL_SDRAM_Private_Functions_Group1 SDRAM Initialization/de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef FMC_SDRAM_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_SDRAM_Timing_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_SDRAM_DeInit(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+/**
+ * @}
+ */
+
+/** @defgroup FMC_LL_SDRAM_Private_Functions_Group2 SDRAM Control functions
+ * @{
+ */
+HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Enable(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Disable(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_SDRAM_SendCommand(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout);
+HAL_StatusTypeDef FMC_SDRAM_ProgramRefreshRate(FMC_SDRAM_TypeDef *Device, uint32_t RefreshRate);
+HAL_StatusTypeDef FMC_SDRAM_SetAutoRefreshNumber(FMC_SDRAM_TypeDef *Device, uint32_t AutoRefreshNumber);
+uint32_t FMC_SDRAM_GetModeStatus(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_LL_FMC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_ll_fsmc.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,978 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_fsmc.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of FSMC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_LL_FSMC_H
+#define __STM32F4xx_LL_FSMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FSMC_LL
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+/* Private types -------------------------------------------------------------*/
+/** @defgroup FSMC_LL_Private_Types FSMC Private Types
+ * @{
+ */
+
+/**
+ * @brief FSMC NORSRAM Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t NSBank; /*!< Specifies the NORSRAM memory device that will be used.
+ This parameter can be a value of @ref FSMC_NORSRAM_Bank */
+
+ uint32_t DataAddressMux; /*!< Specifies whether the address and data values are
+ multiplexed on the data bus or not.
+ This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing */
+
+ uint32_t MemoryType; /*!< Specifies the type of external memory attached to
+ the corresponding memory device.
+ This parameter can be a value of @ref FSMC_Memory_Type */
+
+ uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be a value of @ref FSMC_NORSRAM_Data_Width */
+
+ uint32_t BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory,
+ valid only with synchronous burst Flash memories.
+ This parameter can be a value of @ref FSMC_Burst_Access_Mode */
+
+ uint32_t WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing
+ the Flash memory in burst mode.
+ This parameter can be a value of @ref FSMC_Wait_Signal_Polarity */
+
+ uint32_t WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash
+ memory, valid only when accessing Flash memories in burst mode.
+ This parameter can be a value of @ref FSMC_Wrap_Mode */
+
+ uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one
+ clock cycle before the wait state or during the wait state,
+ valid only when accessing memories in burst mode.
+ This parameter can be a value of @ref FSMC_Wait_Timing */
+
+ uint32_t WriteOperation; /*!< Enables or disables the write operation in the selected device by the FSMC.
+ This parameter can be a value of @ref FSMC_Write_Operation */
+
+ uint32_t WaitSignal; /*!< Enables or disables the wait state insertion via wait
+ signal, valid for Flash memory access in burst mode.
+ This parameter can be a value of @ref FSMC_Wait_Signal */
+
+ uint32_t ExtendedMode; /*!< Enables or disables the extended mode.
+ This parameter can be a value of @ref FSMC_Extended_Mode */
+
+ uint32_t AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers,
+ valid only with asynchronous Flash memories.
+ This parameter can be a value of @ref FSMC_AsynchronousWait */
+
+ uint32_t WriteBurst; /*!< Enables or disables the write burst operation.
+ This parameter can be a value of @ref FSMC_Write_Burst */
+
+}FSMC_NORSRAM_InitTypeDef;
+
+/**
+ * @brief FSMC NORSRAM Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t AddressSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address setup time.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+ @note This parameter is not used with synchronous NOR Flash memories. */
+
+ uint32_t AddressHoldTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address hold time.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 15.
+ @note This parameter is not used with synchronous NOR Flash memories. */
+
+ uint32_t DataSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the data setup time.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 255.
+ @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed
+ NOR Flash memories. */
+
+ uint32_t BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure
+ the duration of the bus turnaround.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+ @note This parameter is only used for multiplexed NOR Flash memories. */
+
+ uint32_t CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of
+ HCLK cycles. This parameter can be a value between Min_Data = 2 and Max_Data = 16.
+ @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM
+ accesses. */
+
+ uint32_t DataLatency; /*!< Defines the number of memory clock cycles to issue
+ to the memory before getting the first data.
+ The parameter value depends on the memory type as shown below:
+ - It must be set to 0 in case of a CRAM
+ - It is don't care in asynchronous NOR, SRAM or ROM accesses
+ - It may assume a value between Min_Data = 2 and Max_Data = 17 in NOR Flash memories
+ with synchronous burst mode enable */
+
+ uint32_t AccessMode; /*!< Specifies the asynchronous access mode.
+ This parameter can be a value of @ref FSMC_Access_Mode */
+
+}FSMC_NORSRAM_TimingTypeDef;
+
+/**
+ * @brief FSMC NAND Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t NandBank; /*!< Specifies the NAND memory device that will be used.
+ This parameter can be a value of @ref FSMC_NAND_Bank */
+
+ uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory device.
+ This parameter can be any value of @ref FSMC_Wait_feature */
+
+ uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be any value of @ref FSMC_NAND_Data_Width */
+
+ uint32_t EccComputation; /*!< Enables or disables the ECC computation.
+ This parameter can be any value of @ref FSMC_ECC */
+
+ uint32_t ECCPageSize; /*!< Defines the page size for the extended ECC.
+ This parameter can be any value of @ref FSMC_ECC_Page_Size */
+
+ uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+}FSMC_NAND_InitTypeDef;
+
+/**
+ * @brief FSMC NAND/PCCARD Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t SetupTime; /*!< Defines the number of HCLK cycles to setup address before
+ the command assertion for NAND-Flash read or write access
+ to common/Attribute or I/O memory space (depending on
+ the memory space timing to be configured).
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the
+ command for NAND-Flash read or write access to
+ common/Attribute or I/O memory space (depending on the
+ memory space timing to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address
+ (and data for write access) after the command de-assertion
+ for NAND-Flash read or write access to common/Attribute
+ or I/O memory space (depending on the memory space timing
+ to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the
+ data bus is kept in HiZ after the start of a NAND-Flash
+ write access to common/Attribute or I/O memory space (depending
+ on the memory space timing to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+}FSMC_NAND_PCC_TimingTypeDef;
+
+/**
+ * @brief FSMC NAND Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the PCCARD Memory device.
+ This parameter can be any value of @ref FSMC_Wait_feature */
+
+ uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+}FSMC_PCCARD_InitTypeDef;
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup FSMC_LL_Private_Constants FSMC Private Constants
+ * @{
+ */
+
+/** @defgroup FSMC_LL_NOR_SRAM_Controller FSMC NOR/SRAM Controller
+ * @{
+ */
+/** @defgroup FSMC_NORSRAM_Bank FSMC NOR/SRAM Bank
+ * @{
+ */
+#define FSMC_NORSRAM_BANK1 ((uint32_t)0x00000000)
+#define FSMC_NORSRAM_BANK2 ((uint32_t)0x00000002)
+#define FSMC_NORSRAM_BANK3 ((uint32_t)0x00000004)
+#define FSMC_NORSRAM_BANK4 ((uint32_t)0x00000006)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Data_Address_Bus_Multiplexing FSMC Data Address Bus Multiplexing
+ * @{
+ */
+#define FSMC_DATA_ADDRESS_MUX_DISABLE ((uint32_t)0x00000000)
+#define FSMC_DATA_ADDRESS_MUX_ENABLE ((uint32_t)0x00000002)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Memory_Type FSMC Memory Type
+ * @{
+ */
+#define FSMC_MEMORY_TYPE_SRAM ((uint32_t)0x00000000)
+#define FSMC_MEMORY_TYPE_PSRAM ((uint32_t)0x00000004)
+#define FSMC_MEMORY_TYPE_NOR ((uint32_t)0x00000008)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_NORSRAM_Data_Width FSMC NOR/SRAM Data Width
+ * @{
+ */
+#define FSMC_NORSRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000)
+#define FSMC_NORSRAM_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010)
+#define FSMC_NORSRAM_MEM_BUS_WIDTH_32 ((uint32_t)0x00000020)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_NORSRAM_Flash_Access FSMC NOR/SRAM Flash Access
+ * @{
+ */
+#define FSMC_NORSRAM_FLASH_ACCESS_ENABLE ((uint32_t)0x00000040)
+#define FSMC_NORSRAM_FLASH_ACCESS_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Burst_Access_Mode FSMC Burst Access Mode
+ * @{
+ */
+#define FSMC_BURST_ACCESS_MODE_DISABLE ((uint32_t)0x00000000)
+#define FSMC_BURST_ACCESS_MODE_ENABLE ((uint32_t)0x00000100)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_Signal_Polarity FSMC Wait Signal Polarity
+ * @{
+ */
+#define FSMC_WAIT_SIGNAL_POLARITY_LOW ((uint32_t)0x00000000)
+#define FSMC_WAIT_SIGNAL_POLARITY_HIGH ((uint32_t)0x00000200)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wrap_Mode FSMC Wrap Mode
+ * @{
+ */
+#define FSMC_WRAP_MODE_DISABLE ((uint32_t)0x00000000)
+#define FSMC_WRAP_MODE_ENABLE ((uint32_t)0x00000400)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_Timing FSMC Wait Timing
+ * @{
+ */
+#define FSMC_WAIT_TIMING_BEFORE_WS ((uint32_t)0x00000000)
+#define FSMC_WAIT_TIMING_DURING_WS ((uint32_t)0x00000800)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Write_Operation FSMC Write Operation
+ * @{
+ */
+#define FSMC_WRITE_OPERATION_DISABLE ((uint32_t)0x00000000)
+#define FSMC_WRITE_OPERATION_ENABLE ((uint32_t)0x00001000)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_Signal FSMC Wait Signal
+ * @{
+ */
+#define FSMC_WAIT_SIGNAL_DISABLE ((uint32_t)0x00000000)
+#define FSMC_WAIT_SIGNAL_ENABLE ((uint32_t)0x00002000)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Extended_Mode FSMC Extended Mode
+ * @{
+ */
+#define FSMC_EXTENDED_MODE_DISABLE ((uint32_t)0x00000000)
+#define FSMC_EXTENDED_MODE_ENABLE ((uint32_t)0x00004000)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_AsynchronousWait FSMC Asynchronous Wait
+ * @{
+ */
+#define FSMC_ASYNCHRONOUS_WAIT_DISABLE ((uint32_t)0x00000000)
+#define FSMC_ASYNCHRONOUS_WAIT_ENABLE ((uint32_t)0x00008000)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Write_Burst FSMC Write Burst
+ * @{
+ */
+#define FSMC_WRITE_BURST_DISABLE ((uint32_t)0x00000000)
+#define FSMC_WRITE_BURST_ENABLE ((uint32_t)0x00080000)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Continous_Clock FSMC Continous Clock
+ * @{
+ */
+#define FSMC_CONTINUOUS_CLOCK_SYNC_ONLY ((uint32_t)0x00000000)
+#define FSMC_CONTINUOUS_CLOCK_SYNC_ASYNC ((uint32_t)0x00100000)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Access_Mode FSMC Access Mode
+ * @{
+ */
+#define FSMC_ACCESS_MODE_A ((uint32_t)0x00000000)
+#define FSMC_ACCESS_MODE_B ((uint32_t)0x10000000)
+#define FSMC_ACCESS_MODE_C ((uint32_t)0x20000000)
+#define FSMC_ACCESS_MODE_D ((uint32_t)0x30000000)
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_NAND_Controller FSMC NAND and PCCARD Controller
+ * @{
+ */
+/** @defgroup FSMC_NAND_Bank FSMC NAND Bank
+ * @{
+ */
+#define FSMC_NAND_BANK2 ((uint32_t)0x00000010)
+#define FSMC_NAND_BANK3 ((uint32_t)0x00000100)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_feature FSMC Wait feature
+ * @{
+ */
+#define FSMC_NAND_PCC_WAIT_FEATURE_DISABLE ((uint32_t)0x00000000)
+#define FSMC_NAND_PCC_WAIT_FEATURE_ENABLE ((uint32_t)0x00000002)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_PCR_Memory_Type FSMC PCR Memory Type
+ * @{
+ */
+#define FSMC_PCR_MEMORY_TYPE_PCCARD ((uint32_t)0x00000000)
+#define FSMC_PCR_MEMORY_TYPE_NAND ((uint32_t)0x00000008)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_NAND_Data_Width FSMC NAND Data Width
+ * @{
+ */
+#define FSMC_NAND_PCC_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000)
+#define FSMC_NAND_PCC_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_ECC FSMC ECC
+ * @{
+ */
+#define FSMC_NAND_ECC_DISABLE ((uint32_t)0x00000000)
+#define FSMC_NAND_ECC_ENABLE ((uint32_t)0x00000040)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_ECC_Page_Size FSMC ECC Page Size
+ * @{
+ */
+#define FSMC_NAND_ECC_PAGE_SIZE_256BYTE ((uint32_t)0x00000000)
+#define FSMC_NAND_ECC_PAGE_SIZE_512BYTE ((uint32_t)0x00020000)
+#define FSMC_NAND_ECC_PAGE_SIZE_1024BYTE ((uint32_t)0x00040000)
+#define FSMC_NAND_ECC_PAGE_SIZE_2048BYTE ((uint32_t)0x00060000)
+#define FSMC_NAND_ECC_PAGE_SIZE_4096BYTE ((uint32_t)0x00080000)
+#define FSMC_NAND_ECC_PAGE_SIZE_8192BYTE ((uint32_t)0x000A0000)
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_Interrupt_definition FSMC Interrupt definition
+ * @{
+ */
+#define FSMC_IT_RISING_EDGE ((uint32_t)0x00000008)
+#define FSMC_IT_LEVEL ((uint32_t)0x00000010)
+#define FSMC_IT_FALLING_EDGE ((uint32_t)0x00000020)
+#define FSMC_IT_REFRESH_ERROR ((uint32_t)0x00004000)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_Flag_definition FSMC Flag definition
+ * @{
+ */
+#define FSMC_FLAG_RISING_EDGE ((uint32_t)0x00000001)
+#define FSMC_FLAG_LEVEL ((uint32_t)0x00000002)
+#define FSMC_FLAG_FALLING_EDGE ((uint32_t)0x00000004)
+#define FSMC_FLAG_FEMPT ((uint32_t)0x00000040)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_Alias_definition FSMC Alias definition
+ * @{
+ */
+#define FSMC_NORSRAM_TypeDef FSMC_Bank1_TypeDef
+#define FSMC_NORSRAM_EXTENDED_TypeDef FSMC_Bank1E_TypeDef
+#define FSMC_NAND_TypeDef FSMC_Bank2_3_TypeDef
+#define FSMC_PCCARD_TypeDef FSMC_Bank4_TypeDef
+
+#define FSMC_NORSRAM_DEVICE FSMC_Bank1
+#define FSMC_NORSRAM_EXTENDED_DEVICE FSMC_Bank1E
+#define FSMC_NAND_DEVICE FSMC_Bank2_3
+#define FSMC_PCCARD_DEVICE FSMC_Bank4
+
+#define FMC_NORSRAM_TypeDef FSMC_NORSRAM_TypeDef
+#define FMC_NORSRAM_EXTENDED_TypeDef FSMC_NORSRAM_EXTENDED_TypeDef
+#define FMC_NORSRAM_InitTypeDef FSMC_NORSRAM_InitTypeDef
+#define FMC_NORSRAM_TimingTypeDef FSMC_NORSRAM_TimingTypeDef
+
+#define FMC_NORSRAM_Init FSMC_NORSRAM_Init
+#define FMC_NORSRAM_Timing_Init FSMC_NORSRAM_Timing_Init
+#define FMC_NORSRAM_Extended_Timing_Init FSMC_NORSRAM_Extended_Timing_Init
+#define FMC_NORSRAM_DeInit FSMC_NORSRAM_DeInit
+#define FMC_NORSRAM_WriteOperation_Enable FSMC_NORSRAM_WriteOperation_Enable
+#define FMC_NORSRAM_WriteOperation_Disable FSMC_NORSRAM_WriteOperation_Disable
+
+#define __FMC_NORSRAM_ENABLE __FSMC_NORSRAM_ENABLE
+#define __FMC_NORSRAM_DISABLE __FSMC_NORSRAM_DISABLE
+
+#define FMC_NAND_InitTypeDef FSMC_NAND_InitTypeDef
+#define FMC_PCCARD_InitTypeDef FSMC_PCCARD_InitTypeDef
+#define FMC_NAND_PCC_TimingTypeDef FSMC_NAND_PCC_TimingTypeDef
+
+#define FMC_NAND_Init FSMC_NAND_Init
+#define FMC_NAND_CommonSpace_Timing_Init FSMC_NAND_CommonSpace_Timing_Init
+#define FMC_NAND_AttributeSpace_Timing_Init FSMC_NAND_AttributeSpace_Timing_Init
+#define FMC_NAND_DeInit FSMC_NAND_DeInit
+#define FMC_NAND_ECC_Enable FSMC_NAND_ECC_Enable
+#define FMC_NAND_ECC_Disable FSMC_NAND_ECC_Disable
+#define FMC_NAND_GetECC FSMC_NAND_GetECC
+#define FMC_PCCARD_Init FSMC_PCCARD_Init
+#define FMC_PCCARD_CommonSpace_Timing_Init FSMC_PCCARD_CommonSpace_Timing_Init
+#define FMC_PCCARD_AttributeSpace_Timing_Init FSMC_PCCARD_AttributeSpace_Timing_Init
+#define FMC_PCCARD_IOSpace_Timing_Init FSMC_PCCARD_IOSpace_Timing_Init
+#define FMC_PCCARD_DeInit FSMC_PCCARD_DeInit
+
+#define __FMC_NAND_ENABLE __FSMC_NAND_ENABLE
+#define __FMC_NAND_DISABLE __FSMC_NAND_DISABLE
+#define __FMC_PCCARD_ENABLE __FSMC_PCCARD_ENABLE
+#define __FMC_PCCARD_DISABLE __FSMC_PCCARD_DISABLE
+#define __FMC_NAND_ENABLE_IT __FSMC_NAND_ENABLE_IT
+#define __FMC_NAND_DISABLE_IT __FSMC_NAND_DISABLE_IT
+#define __FMC_NAND_GET_FLAG __FSMC_NAND_GET_FLAG
+#define __FMC_NAND_CLEAR_FLAG __FSMC_NAND_CLEAR_FLAG
+#define __FMC_PCCARD_ENABLE_IT __FSMC_PCCARD_ENABLE_IT
+#define __FMC_PCCARD_DISABLE_IT __FSMC_PCCARD_DISABLE_IT
+#define __FMC_PCCARD_GET_FLAG __FSMC_PCCARD_GET_FLAG
+#define __FMC_PCCARD_CLEAR_FLAG __FSMC_PCCARD_CLEAR_FLAG
+
+#define FMC_NORSRAM_TypeDef FSMC_NORSRAM_TypeDef
+#define FMC_NORSRAM_EXTENDED_TypeDef FSMC_NORSRAM_EXTENDED_TypeDef
+#define FMC_NAND_TypeDef FSMC_NAND_TypeDef
+#define FMC_PCCARD_TypeDef FSMC_PCCARD_TypeDef
+
+#define FMC_NORSRAM_DEVICE FSMC_NORSRAM_DEVICE
+#define FMC_NORSRAM_EXTENDED_DEVICE FSMC_NORSRAM_EXTENDED_DEVICE
+#define FMC_NAND_DEVICE FSMC_NAND_DEVICE
+#define FMC_PCCARD_DEVICE FSMC_PCCARD_DEVICE
+
+#define FMC_NAND_BANK2 FSMC_NAND_BANK2
+
+#define FMC_NORSRAM_BANK1 FSMC_NORSRAM_BANK1
+#define FMC_NORSRAM_BANK2 FSMC_NORSRAM_BANK2
+#define FMC_NORSRAM_BANK3 FSMC_NORSRAM_BANK3
+
+#define FMC_IT_RISING_EDGE FSMC_IT_RISING_EDGE
+#define FMC_IT_LEVEL FSMC_IT_LEVEL
+#define FMC_IT_FALLING_EDGE FSMC_IT_FALLING_EDGE
+#define FMC_IT_REFRESH_ERROR FSMC_IT_REFRESH_ERROR
+
+#define FMC_FLAG_RISING_EDGE FSMC_FLAG_RISING_EDGE
+#define FMC_FLAG_LEVEL FSMC_FLAG_LEVEL
+#define FMC_FLAG_FALLING_EDGE FSMC_FLAG_FALLING_EDGE
+#define FMC_FLAG_FEMPT FSMC_FLAG_FEMPT
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/** @defgroup FSMC_LL_Private_Macros FSMC Private Macros
+ * @{
+ */
+
+/** @defgroup FSMC_LL_NOR_Macros FSMC NOR/SRAM Exported Macros
+ * @brief macros to handle NOR device enable/disable and read/write operations
+ * @{
+ */
+/**
+ * @brief Enable the NORSRAM device access.
+ * @param __INSTANCE__: FSMC_NORSRAM Instance
+ * @param __BANK__: FSMC_NORSRAM Bank
+ * @retval none
+ */
+#define __FSMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] |= FSMC_BCR1_MBKEN)
+
+/**
+ * @brief Disable the NORSRAM device access.
+ * @param __INSTANCE__: FSMC_NORSRAM Instance
+ * @param __BANK__: FSMC_NORSRAM Bank
+ * @retval none
+ */
+#define __FSMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] &= ~FSMC_BCR1_MBKEN)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_NAND_Macros FSMC NAND Macros
+ * @brief macros to handle NAND device enable/disable
+ * @{
+ */
+/**
+ * @brief Enable the NAND device access.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__: FSMC_NAND Bank
+ * @retval none
+ */
+#define __FSMC_NAND_ENABLE(__INSTANCE__, __BANK__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 |= FSMC_PCR2_PBKEN): \
+ ((__INSTANCE__)->PCR3 |= FSMC_PCR3_PBKEN))
+
+/**
+ * @brief Disable the NAND device access.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__: FSMC_NAND Bank
+ * @retval none
+ */
+#define __FSMC_NAND_DISABLE(__INSTANCE__, __BANK__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 &= ~FSMC_PCR2_PBKEN): \
+ ((__INSTANCE__)->PCR3 &= ~FSMC_PCR3_PBKEN))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_PCCARD_Macros FSMC PCCARD Macros
+ * @brief macros to handle SRAM read/write operations
+ * @{
+ */
+/**
+ * @brief Enable the PCCARD device access.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @retval none
+ */
+#define __FSMC_PCCARD_ENABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 |= FSMC_PCR4_PBKEN)
+
+/**
+ * @brief Disable the PCCARD device access.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @retval none
+ */
+#define __FSMC_PCCARD_DISABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 &= ~FSMC_PCR4_PBKEN)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_Flag_Interrupt_Macros FSMC Flag&Interrupt Macros
+ * @brief macros to handle FSMC flags and interrupts
+ * @{
+ */
+/**
+ * @brief Enable the NAND device interrupt.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__: FSMC_NAND Bank
+ * @param __INTERRUPT__: FSMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FSMC_IT_LEVEL: Interrupt level.
+ * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FSMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 |= (__INTERRUPT__)): \
+ ((__INSTANCE__)->SR3 |= (__INTERRUPT__)))
+
+/**
+ * @brief Disable the NAND device interrupt.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__: FSMC_NAND Bank
+ * @param __INTERRUPT__: FSMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FSMC_IT_LEVEL: Interrupt level.
+ * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FSMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__INTERRUPT__)): \
+ ((__INSTANCE__)->SR3 &= ~(__INTERRUPT__)))
+
+/**
+ * @brief Get flag status of the NAND device.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__ : FSMC_NAND Bank
+ * @param __FLAG__ : FSMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FSMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FSMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FSMC_NAND_BANK2)? (((__INSTANCE__)->SR2 &(__FLAG__)) == (__FLAG__)): \
+ (((__INSTANCE__)->SR3 &(__FLAG__)) == (__FLAG__)))
+/**
+ * @brief Clear flag status of the NAND device.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__: FSMC_NAND Bank
+ * @param __FLAG__: FSMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FSMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval None
+ */
+#define __FSMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__FLAG__)): \
+ ((__INSTANCE__)->SR3 &= ~(__FLAG__)))
+/**
+ * @brief Enable the PCCARD device interrupt.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @param __INTERRUPT__: FSMC_PCCARD interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FSMC_IT_LEVEL: Interrupt level.
+ * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FSMC_PCCARD_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the PCCARD device interrupt.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @param __INTERRUPT__: FSMC_PCCARD interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FSMC_IT_LEVEL: Interrupt level.
+ * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FSMC_PCCARD_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 &= ~(__INTERRUPT__))
+
+/**
+ * @brief Get flag status of the PCCARD device.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @param __FLAG__: FSMC_PCCARD flag
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FSMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FSMC_PCCARD_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SR4 &(__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear flag status of the PCCARD device.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @param __FLAG__: FSMC_PCCARD flag
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FSMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval None
+ */
+#define __FSMC_PCCARD_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SR4 &= ~(__FLAG__))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_Assert_Macros FSMC Assert Macros
+ * @{
+ */
+#define IS_FSMC_NORSRAM_BANK(__BANK__) (((__BANK__) == FSMC_NORSRAM_BANK1) || \
+ ((__BANK__) == FSMC_NORSRAM_BANK2) || \
+ ((__BANK__) == FSMC_NORSRAM_BANK3) || \
+ ((__BANK__) == FSMC_NORSRAM_BANK4))
+
+#define IS_FSMC_MUX(__MUX__) (((__MUX__) == FSMC_DATA_ADDRESS_MUX_DISABLE) || \
+ ((__MUX__) == FSMC_DATA_ADDRESS_MUX_ENABLE))
+
+#define IS_FSMC_MEMORY(__MEMORY__) (((__MEMORY__) == FSMC_MEMORY_TYPE_SRAM) || \
+ ((__MEMORY__) == FSMC_MEMORY_TYPE_PSRAM)|| \
+ ((__MEMORY__) == FSMC_MEMORY_TYPE_NOR))
+
+#define IS_FSMC_NORSRAM_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_8) || \
+ ((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_16) || \
+ ((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_32))
+
+#define IS_FSMC_ACCESS_MODE(__MODE__) (((__MODE__) == FSMC_ACCESS_MODE_A) || \
+ ((__MODE__) == FSMC_ACCESS_MODE_B) || \
+ ((__MODE__) == FSMC_ACCESS_MODE_C) || \
+ ((__MODE__) == FSMC_ACCESS_MODE_D))
+
+#define IS_FSMC_NAND_BANK(BANK) (((BANK) == FSMC_NAND_BANK2) || \
+ ((BANK) == FSMC_NAND_BANK3))
+
+#define IS_FSMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FSMC_NAND_PCC_WAIT_FEATURE_DISABLE) || \
+ ((FEATURE) == FSMC_NAND_PCC_WAIT_FEATURE_ENABLE))
+
+#define IS_FSMC_NAND_MEMORY_WIDTH(WIDTH) (((WIDTH) == FSMC_NAND_PCC_MEM_BUS_WIDTH_8) || \
+ ((WIDTH) == FSMC_NAND_PCC_MEM_BUS_WIDTH_16))
+
+#define IS_FSMC_ECC_STATE(STATE) (((STATE) == FSMC_NAND_ECC_DISABLE) || \
+ ((STATE) == FSMC_NAND_ECC_ENABLE))
+
+#define IS_FSMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_256BYTE) || \
+ ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_512BYTE) || \
+ ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \
+ ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \
+ ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \
+ ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_8192BYTE))
+
+#define IS_FSMC_TCLR_TIME(TIME) ((TIME) <= 255)
+
+#define IS_FSMC_TAR_TIME(TIME) ((TIME) <= 255)
+
+#define IS_FSMC_SETUP_TIME(TIME) ((TIME) <= 255)
+
+#define IS_FSMC_WAIT_TIME(TIME) ((TIME) <= 255)
+
+#define IS_FSMC_HOLD_TIME(TIME) ((TIME) <= 255)
+
+#define IS_FSMC_HIZ_TIME(TIME) ((TIME) <= 255)
+
+#define IS_FSMC_NORSRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_NORSRAM_DEVICE)
+
+#define IS_FSMC_NORSRAM_EXTENDED_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_NORSRAM_EXTENDED_DEVICE)
+
+#define IS_FSMC_NAND_DEVICE(INSTANCE) ((INSTANCE) == FSMC_NAND_DEVICE)
+
+#define IS_FSMC_PCCARD_DEVICE(INSTANCE) ((INSTANCE) == FSMC_PCCARD_DEVICE)
+
+#define IS_FSMC_BURSTMODE(__STATE__) (((__STATE__) == FSMC_BURST_ACCESS_MODE_DISABLE) || \
+ ((__STATE__) == FSMC_BURST_ACCESS_MODE_ENABLE))
+
+#define IS_FSMC_WAIT_POLARITY(__POLARITY__) (((__POLARITY__) == FSMC_WAIT_SIGNAL_POLARITY_LOW) || \
+ ((__POLARITY__) == FSMC_WAIT_SIGNAL_POLARITY_HIGH))
+
+#define IS_FSMC_WRAP_MODE(__MODE__) (((__MODE__) == FSMC_WRAP_MODE_DISABLE) || \
+ ((__MODE__) == FSMC_WRAP_MODE_ENABLE))
+
+#define IS_FSMC_WAIT_SIGNAL_ACTIVE(__ACTIVE__) (((__ACTIVE__) == FSMC_WAIT_TIMING_BEFORE_WS) || \
+ ((__ACTIVE__) == FSMC_WAIT_TIMING_DURING_WS))
+
+#define IS_FSMC_WRITE_OPERATION(__OPERATION__) (((__OPERATION__) == FSMC_WRITE_OPERATION_DISABLE) || \
+ ((__OPERATION__) == FSMC_WRITE_OPERATION_ENABLE))
+
+#define IS_FSMC_WAITE_SIGNAL(__SIGNAL__) (((__SIGNAL__) == FSMC_WAIT_SIGNAL_DISABLE) || \
+ ((__SIGNAL__) == FSMC_WAIT_SIGNAL_ENABLE))
+
+#define IS_FSMC_EXTENDED_MODE(__MODE__) (((__MODE__) == FSMC_EXTENDED_MODE_DISABLE) || \
+ ((__MODE__) == FSMC_EXTENDED_MODE_ENABLE))
+
+#define IS_FSMC_ASYNWAIT(__STATE__) (((__STATE__) == FSMC_ASYNCHRONOUS_WAIT_DISABLE) || \
+ ((__STATE__) == FSMC_ASYNCHRONOUS_WAIT_ENABLE))
+
+#define IS_FSMC_DATA_LATENCY(__LATENCY__) (((__LATENCY__) > 1) && ((__LATENCY__) <= 17))
+
+#define IS_FSMC_WRITE_BURST(__BURST__) (((__BURST__) == FSMC_WRITE_BURST_DISABLE) || \
+ ((__BURST__) == FSMC_WRITE_BURST_ENABLE))
+
+#define IS_FSMC_ADDRESS_SETUP_TIME(__TIME__) ((__TIME__) <= 15)
+
+#define IS_FSMC_ADDRESS_HOLD_TIME(__TIME__) (((__TIME__) > 0) && ((__TIME__) <= 15))
+
+#define IS_FSMC_DATASETUP_TIME(__TIME__) (((__TIME__) > 0) && ((__TIME__) <= 255))
+
+#define IS_FSMC_TURNAROUND_TIME(__TIME__) ((__TIME__) <= 15)
+
+#define IS_FSMC_CONTINOUS_CLOCK(CCLOCK) (((CCLOCK) == FSMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \
+ ((CCLOCK) == FSMC_CONTINUOUS_CLOCK_SYNC_ASYNC))
+
+#define IS_FSMC_CLK_DIV(DIV) (((DIV) > 1) && ((DIV) <= 16))
+
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup FSMC_LL_Private_Functions FSMC LL Private Functions
+ * @{
+ */
+
+/** @defgroup FSMC_LL_NORSRAM NOR SRAM
+ * @{
+ */
+
+/** @defgroup FSMC_LL_NORSRAM_Private_Functions_Group1 NOR SRAM Initialization/de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef FSMC_NORSRAM_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_InitTypeDef *Init);
+HAL_StatusTypeDef FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode);
+HAL_StatusTypeDef FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank);
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_NORSRAM_Private_Functions_Group2 NOR SRAM Control functions
+ * @{
+ */
+HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Enable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_NAND NAND
+ * @{
+ */
+/** @defgroup FSMC_LL_NAND_Private_Functions_Group1 NAND Initialization/de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef FSMC_NAND_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_InitTypeDef *Init);
+HAL_StatusTypeDef FSMC_NAND_CommonSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NAND_AttributeSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NAND_DeInit(FSMC_NAND_TypeDef *Device, uint32_t Bank);
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_NAND_Private_Functions_Group2 NAND Control functions
+ * @{
+ */
+HAL_StatusTypeDef FSMC_NAND_ECC_Enable(FSMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NAND_ECC_Disable(FSMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NAND_GetECC(FSMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout);
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_LL_PCCARD PCCARD
+ * @{
+ */
+/** @defgroup FSMC_LL_PCCARD_Private_Functions_Group1 PCCARD Initialization/de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef FSMC_PCCARD_Init(FSMC_PCCARD_TypeDef *Device, FSMC_PCCARD_InitTypeDef *Init);
+HAL_StatusTypeDef FSMC_PCCARD_CommonSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FSMC_PCCARD_AttributeSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FSMC_PCCARD_IOSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FSMC_PCCARD_DeInit(FSMC_PCCARD_TypeDef *Device);
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_LL_FSMC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_ll_sdmmc.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,908 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_sdmmc.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of SDMMC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_LL_SDMMC_H
+#define __STM32F4xx_LL_SDMMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_Driver
+ * @{
+ */
+
+/** @addtogroup SDMMC_LL
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SDMMC_LL_Exported_Types SDMMC_LL Exported Types
+ * @{
+ */
+
+/**
+ * @brief SDMMC Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockEdge; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref SDIO_Clock_Edge */
+
+ uint32_t ClockBypass; /*!< Specifies whether the SDIO Clock divider bypass is
+ enabled or disabled.
+ This parameter can be a value of @ref SDIO_Clock_Bypass */
+
+ uint32_t ClockPowerSave; /*!< Specifies whether SDIO Clock output is enabled or
+ disabled when the bus is idle.
+ This parameter can be a value of @ref SDIO_Clock_Power_Save */
+
+ uint32_t BusWide; /*!< Specifies the SDIO bus width.
+ This parameter can be a value of @ref SDIO_Bus_Wide */
+
+ uint32_t HardwareFlowControl; /*!< Specifies whether the SDIO hardware flow control is enabled or disabled.
+ This parameter can be a value of @ref SDIO_Hardware_Flow_Control */
+
+ uint32_t ClockDiv; /*!< Specifies the clock frequency of the SDIO controller.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+}SDIO_InitTypeDef;
+
+
+/**
+ * @brief SDIO Command Control structure
+ */
+typedef struct
+{
+ uint32_t Argument; /*!< Specifies the SDIO command argument which is sent
+ to a card as part of a command message. If a command
+ contains an argument, it must be loaded into this register
+ before writing the command to the command register. */
+
+ uint32_t CmdIndex; /*!< Specifies the SDIO command index. It must be Min_Data = 0 and
+ Max_Data = 64 */
+
+ uint32_t Response; /*!< Specifies the SDIO response type.
+ This parameter can be a value of @ref SDIO_Response_Type */
+
+ uint32_t WaitForInterrupt; /*!< Specifies whether SDIO wait for interrupt request is
+ enabled or disabled.
+ This parameter can be a value of @ref SDIO_Wait_Interrupt_State */
+
+ uint32_t CPSM; /*!< Specifies whether SDIO Command path state machine (CPSM)
+ is enabled or disabled.
+ This parameter can be a value of @ref SDIO_CPSM_State */
+}SDIO_CmdInitTypeDef;
+
+
+/**
+ * @brief SDIO Data Control structure
+ */
+typedef struct
+{
+ uint32_t DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */
+
+ uint32_t DataLength; /*!< Specifies the number of data bytes to be transferred. */
+
+ uint32_t DataBlockSize; /*!< Specifies the data block size for block transfer.
+ This parameter can be a value of @ref SDIO_Data_Block_Size */
+
+ uint32_t TransferDir; /*!< Specifies the data transfer direction, whether the transfer
+ is a read or write.
+ This parameter can be a value of @ref SDIO_Transfer_Direction */
+
+ uint32_t TransferMode; /*!< Specifies whether data transfer is in stream or block mode.
+ This parameter can be a value of @ref SDIO_Transfer_Type */
+
+ uint32_t DPSM; /*!< Specifies whether SDIO Data path state machine (DPSM)
+ is enabled or disabled.
+ This parameter can be a value of @ref SDIO_DPSM_State */
+}SDIO_DataInitTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SDMMC_LL_Exported_Constants SDMMC_LL Exported Constants
+ * @{
+ */
+
+/** @defgroup SDIO_Clock_Edge Clock Edge
+ * @{
+ */
+#define SDIO_CLOCK_EDGE_RISING ((uint32_t)0x00000000)
+#define SDIO_CLOCK_EDGE_FALLING SDIO_CLKCR_NEGEDGE
+
+#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_CLOCK_EDGE_RISING) || \
+ ((EDGE) == SDIO_CLOCK_EDGE_FALLING))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Clock_Bypass Clock Bypass
+ * @{
+ */
+#define SDIO_CLOCK_BYPASS_DISABLE ((uint32_t)0x00000000)
+#define SDIO_CLOCK_BYPASS_ENABLE SDIO_CLKCR_BYPASS
+
+#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_CLOCK_BYPASS_DISABLE) || \
+ ((BYPASS) == SDIO_CLOCK_BYPASS_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Clock_Power_Save Clock Power Saving
+ * @{
+ */
+#define SDIO_CLOCK_POWER_SAVE_DISABLE ((uint32_t)0x00000000)
+#define SDIO_CLOCK_POWER_SAVE_ENABLE SDIO_CLKCR_PWRSAV
+
+#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_CLOCK_POWER_SAVE_DISABLE) || \
+ ((SAVE) == SDIO_CLOCK_POWER_SAVE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Bus_Wide Bus Width
+ * @{
+ */
+#define SDIO_BUS_WIDE_1B ((uint32_t)0x00000000)
+#define SDIO_BUS_WIDE_4B SDIO_CLKCR_WIDBUS_0
+#define SDIO_BUS_WIDE_8B SDIO_CLKCR_WIDBUS_1
+
+#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BUS_WIDE_1B) || \
+ ((WIDE) == SDIO_BUS_WIDE_4B) || \
+ ((WIDE) == SDIO_BUS_WIDE_8B))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Hardware_Flow_Control Hardware Flow Control
+ * @{
+ */
+#define SDIO_HARDWARE_FLOW_CONTROL_DISABLE ((uint32_t)0x00000000)
+#define SDIO_HARDWARE_FLOW_CONTROL_ENABLE SDIO_CLKCR_HWFC_EN
+
+#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_DISABLE) || \
+ ((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Clock_Division Clock Division
+ * @{
+ */
+#define IS_SDIO_CLKDIV(DIV) ((DIV) <= 0xFF)
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Command_Index Command Index
+ * @{
+ */
+#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40)
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Response_Type Response Type
+ * @{
+ */
+#define SDIO_RESPONSE_NO ((uint32_t)0x00000000)
+#define SDIO_RESPONSE_SHORT SDIO_CMD_WAITRESP_0
+#define SDIO_RESPONSE_LONG SDIO_CMD_WAITRESP
+
+#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_RESPONSE_NO) || \
+ ((RESPONSE) == SDIO_RESPONSE_SHORT) || \
+ ((RESPONSE) == SDIO_RESPONSE_LONG))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Wait_Interrupt_State Wait Interrupt
+ * @{
+ */
+#define SDIO_WAIT_NO ((uint32_t)0x00000000)
+#define SDIO_WAIT_IT SDIO_CMD_WAITINT
+#define SDIO_WAIT_PEND SDIO_CMD_WAITPEND
+
+#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_WAIT_NO) || \
+ ((WAIT) == SDIO_WAIT_IT) || \
+ ((WAIT) == SDIO_WAIT_PEND))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_CPSM_State CPSM State
+ * @{
+ */
+#define SDIO_CPSM_DISABLE ((uint32_t)0x00000000)
+#define SDIO_CPSM_ENABLE SDIO_CMD_CPSMEN
+
+#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_DISABLE) || \
+ ((CPSM) == SDIO_CPSM_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Response_Registers Response Register
+ * @{
+ */
+#define SDIO_RESP1 ((uint32_t)0x00000000)
+#define SDIO_RESP2 ((uint32_t)0x00000004)
+#define SDIO_RESP3 ((uint32_t)0x00000008)
+#define SDIO_RESP4 ((uint32_t)0x0000000C)
+
+#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || \
+ ((RESP) == SDIO_RESP2) || \
+ ((RESP) == SDIO_RESP3) || \
+ ((RESP) == SDIO_RESP4))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Data_Length Data Lenght
+ * @{
+ */
+#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF)
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Data_Block_Size Data Block Size
+ * @{
+ */
+#define SDIO_DATABLOCK_SIZE_1B ((uint32_t)0x00000000)
+#define SDIO_DATABLOCK_SIZE_2B SDIO_DCTRL_DBLOCKSIZE_0
+#define SDIO_DATABLOCK_SIZE_4B SDIO_DCTRL_DBLOCKSIZE_1
+#define SDIO_DATABLOCK_SIZE_8B ((uint32_t)0x00000030)
+#define SDIO_DATABLOCK_SIZE_16B SDIO_DCTRL_DBLOCKSIZE_2
+#define SDIO_DATABLOCK_SIZE_32B ((uint32_t)0x00000050)
+#define SDIO_DATABLOCK_SIZE_64B ((uint32_t)0x00000060)
+#define SDIO_DATABLOCK_SIZE_128B ((uint32_t)0x00000070)
+#define SDIO_DATABLOCK_SIZE_256B SDIO_DCTRL_DBLOCKSIZE_3
+#define SDIO_DATABLOCK_SIZE_512B ((uint32_t)0x00000090)
+#define SDIO_DATABLOCK_SIZE_1024B ((uint32_t)0x000000A0)
+#define SDIO_DATABLOCK_SIZE_2048B ((uint32_t)0x000000B0)
+#define SDIO_DATABLOCK_SIZE_4096B ((uint32_t)0x000000C0)
+#define SDIO_DATABLOCK_SIZE_8192B ((uint32_t)0x000000D0)
+#define SDIO_DATABLOCK_SIZE_16384B ((uint32_t)0x000000E0)
+
+#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DATABLOCK_SIZE_1B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_2B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_4B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_8B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_16B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_32B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_64B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_128B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_256B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_512B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_1024B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_2048B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_4096B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_8192B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_16384B))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Transfer_Direction Transfer Direction
+ * @{
+ */
+#define SDIO_TRANSFER_DIR_TO_CARD ((uint32_t)0x00000000)
+#define SDIO_TRANSFER_DIR_TO_SDIO SDIO_DCTRL_DTDIR
+
+#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TRANSFER_DIR_TO_CARD) || \
+ ((DIR) == SDIO_TRANSFER_DIR_TO_SDIO))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Transfer_Type Transfer Type
+ * @{
+ */
+#define SDIO_TRANSFER_MODE_BLOCK ((uint32_t)0x00000000)
+#define SDIO_TRANSFER_MODE_STREAM SDIO_DCTRL_DTMODE
+
+#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TRANSFER_MODE_BLOCK) || \
+ ((MODE) == SDIO_TRANSFER_MODE_STREAM))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_DPSM_State DPSM State
+ * @{
+ */
+#define SDIO_DPSM_DISABLE ((uint32_t)0x00000000)
+#define SDIO_DPSM_ENABLE SDIO_DCTRL_DTEN
+
+#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_DISABLE) ||\
+ ((DPSM) == SDIO_DPSM_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Read_Wait_Mode Read Wait Mode
+ * @{
+ */
+#define SDIO_READ_WAIT_MODE_DATA2 ((uint32_t)0x00000000)
+#define SDIO_READ_WAIT_MODE_CLK ((uint32_t)0x00000001)
+
+#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_READ_WAIT_MODE_CLK) || \
+ ((MODE) == SDIO_READ_WAIT_MODE_DATA2))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Interrupt_sources Interrupt Sources
+ * @{
+ */
+#define SDIO_IT_CCRCFAIL SDIO_STA_CCRCFAIL
+#define SDIO_IT_DCRCFAIL SDIO_STA_DCRCFAIL
+#define SDIO_IT_CTIMEOUT SDIO_STA_CTIMEOUT
+#define SDIO_IT_DTIMEOUT SDIO_STA_DTIMEOUT
+#define SDIO_IT_TXUNDERR SDIO_STA_TXUNDERR
+#define SDIO_IT_RXOVERR SDIO_STA_RXOVERR
+#define SDIO_IT_CMDREND SDIO_STA_CMDREND
+#define SDIO_IT_CMDSENT SDIO_STA_CMDSENT
+#define SDIO_IT_DATAEND SDIO_STA_DATAEND
+#define SDIO_IT_STBITERR SDIO_STA_STBITERR
+#define SDIO_IT_DBCKEND SDIO_STA_DBCKEND
+#define SDIO_IT_CMDACT SDIO_STA_CMDACT
+#define SDIO_IT_TXACT SDIO_STA_TXACT
+#define SDIO_IT_RXACT SDIO_STA_RXACT
+#define SDIO_IT_TXFIFOHE SDIO_STA_TXFIFOHE
+#define SDIO_IT_RXFIFOHF SDIO_STA_RXFIFOHF
+#define SDIO_IT_TXFIFOF SDIO_STA_TXFIFOF
+#define SDIO_IT_RXFIFOF SDIO_STA_RXFIFOF
+#define SDIO_IT_TXFIFOE SDIO_STA_TXFIFOE
+#define SDIO_IT_RXFIFOE SDIO_STA_RXFIFOE
+#define SDIO_IT_TXDAVL SDIO_STA_TXDAVL
+#define SDIO_IT_RXDAVL SDIO_STA_RXDAVL
+#define SDIO_IT_SDIOIT SDIO_STA_SDIOIT
+#define SDIO_IT_CEATAEND SDIO_STA_CEATAEND
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Flags Flags
+ * @{
+ */
+#define SDIO_FLAG_CCRCFAIL SDIO_STA_CCRCFAIL
+#define SDIO_FLAG_DCRCFAIL SDIO_STA_DCRCFAIL
+#define SDIO_FLAG_CTIMEOUT SDIO_STA_CTIMEOUT
+#define SDIO_FLAG_DTIMEOUT SDIO_STA_DTIMEOUT
+#define SDIO_FLAG_TXUNDERR SDIO_STA_TXUNDERR
+#define SDIO_FLAG_RXOVERR SDIO_STA_RXOVERR
+#define SDIO_FLAG_CMDREND SDIO_STA_CMDREND
+#define SDIO_FLAG_CMDSENT SDIO_STA_CMDSENT
+#define SDIO_FLAG_DATAEND SDIO_STA_DATAEND
+#define SDIO_FLAG_STBITERR SDIO_STA_STBITERR
+#define SDIO_FLAG_DBCKEND SDIO_STA_DBCKEND
+#define SDIO_FLAG_CMDACT SDIO_STA_CMDACT
+#define SDIO_FLAG_TXACT SDIO_STA_TXACT
+#define SDIO_FLAG_RXACT SDIO_STA_RXACT
+#define SDIO_FLAG_TXFIFOHE SDIO_STA_TXFIFOHE
+#define SDIO_FLAG_RXFIFOHF SDIO_STA_RXFIFOHF
+#define SDIO_FLAG_TXFIFOF SDIO_STA_TXFIFOF
+#define SDIO_FLAG_RXFIFOF SDIO_STA_RXFIFOF
+#define SDIO_FLAG_TXFIFOE SDIO_STA_TXFIFOE
+#define SDIO_FLAG_RXFIFOE SDIO_STA_RXFIFOE
+#define SDIO_FLAG_TXDAVL SDIO_STA_TXDAVL
+#define SDIO_FLAG_RXDAVL SDIO_STA_RXDAVL
+#define SDIO_FLAG_SDIOIT SDIO_STA_SDIOIT
+#define SDIO_FLAG_CEATAEND SDIO_STA_CEATAEND
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SDMMC_LL_Exported_macros SDMMC_LL Exported Macros
+ * @{
+ */
+
+/** @defgroup SDMMC_LL_Alias_Region Bit Address in the alias region
+ * @{
+ */
+/* ------------ SDIO registers bit address in the alias region -------------- */
+#define SDIO_OFFSET (SDIO_BASE - PERIPH_BASE)
+
+/* --- CLKCR Register ---*/
+/* Alias word address of CLKEN bit */
+#define CLKCR_OFFSET (SDIO_OFFSET + 0x04)
+#define CLKEN_BITNUMBER 0x08
+#define CLKCR_CLKEN_BB (PERIPH_BB_BASE + (CLKCR_OFFSET * 32) + (CLKEN_BITNUMBER * 4))
+
+/* --- CMD Register ---*/
+/* Alias word address of SDIOSUSPEND bit */
+#define CMD_OFFSET (SDIO_OFFSET + 0x0C)
+#define SDIOSUSPEND_BITNUMBER 0x0B
+#define CMD_SDIOSUSPEND_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (SDIOSUSPEND_BITNUMBER * 4))
+
+/* Alias word address of ENCMDCOMPL bit */
+#define ENCMDCOMPL_BITNUMBER 0x0C
+#define CMD_ENCMDCOMPL_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ENCMDCOMPL_BITNUMBER * 4))
+
+/* Alias word address of NIEN bit */
+#define NIEN_BITNUMBER 0x0D
+#define CMD_NIEN_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (NIEN_BITNUMBER * 4))
+
+/* Alias word address of ATACMD bit */
+#define ATACMD_BITNUMBER 0x0E
+#define CMD_ATACMD_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ATACMD_BITNUMBER * 4))
+
+/* --- DCTRL Register ---*/
+/* Alias word address of DMAEN bit */
+#define DCTRL_OFFSET (SDIO_OFFSET + 0x2C)
+#define DMAEN_BITNUMBER 0x03
+#define DCTRL_DMAEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (DMAEN_BITNUMBER * 4))
+
+/* Alias word address of RWSTART bit */
+#define RWSTART_BITNUMBER 0x08
+#define DCTRL_RWSTART_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTART_BITNUMBER * 4))
+
+/* Alias word address of RWSTOP bit */
+#define RWSTOP_BITNUMBER 0x09
+#define DCTRL_RWSTOP_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTOP_BITNUMBER * 4))
+
+/* Alias word address of RWMOD bit */
+#define RWMOD_BITNUMBER 0x0A
+#define DCTRL_RWMOD_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWMOD_BITNUMBER * 4))
+
+/* Alias word address of SDIOEN bit */
+#define SDIOEN_BITNUMBER 0x0B
+#define DCTRL_SDIOEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (SDIOEN_BITNUMBER * 4))
+/**
+ * @}
+ */
+
+/** @defgroup SDMMC_LL_Register Bits And Addresses Definitions
+ * @brief SDMMC_LL registers bit address in the alias region
+ * @{
+ */
+
+/* ---------------------- SDIO registers bit mask --------------------------- */
+/* --- CLKCR Register ---*/
+/* CLKCR register clear mask */
+#define CLKCR_CLEAR_MASK ((uint32_t)(SDIO_CLKCR_CLKDIV | SDIO_CLKCR_PWRSAV |\
+ SDIO_CLKCR_BYPASS | SDIO_CLKCR_WIDBUS |\
+ SDIO_CLKCR_NEGEDGE | SDIO_CLKCR_HWFC_EN))
+
+/* --- PWRCTRL Register ---*/
+/* --- DCTRL Register ---*/
+/* SDIO DCTRL Clear Mask */
+#define DCTRL_CLEAR_MASK ((uint32_t)(SDIO_DCTRL_DTEN | SDIO_DCTRL_DTDIR |\
+ SDIO_DCTRL_DTMODE | SDIO_DCTRL_DBLOCKSIZE))
+
+/* --- CMD Register ---*/
+/* CMD Register clear mask */
+#define CMD_CLEAR_MASK ((uint32_t)(SDIO_CMD_CMDINDEX | SDIO_CMD_WAITRESP |\
+ SDIO_CMD_WAITINT | SDIO_CMD_WAITPEND |\
+ SDIO_CMD_CPSMEN | SDIO_CMD_SDIOSUSPEND))
+
+/* SDIO RESP Registers Address */
+#define SDIO_RESP_ADDR ((uint32_t)(SDIO_BASE + 0x14))
+
+/* SDIO Initialization Frequency (400KHz max) */
+#define SDIO_INIT_CLK_DIV ((uint8_t)0x76)
+
+/* SDIO Data Transfer Frequency (25MHz max) */
+#define SDIO_TRANSFER_CLK_DIV ((uint8_t)0x0)
+/**
+ * @}
+ */
+
+/** @defgroup SDMMC_LL_Interrupt_Clock Interrupt And Clock Configuration
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+
+/**
+ * @brief Enable the SDIO device.
+ * @retval None
+ */
+#define __SDIO_ENABLE() (*(__IO uint32_t *)CLKCR_CLKEN_BB = ENABLE)
+
+/**
+ * @brief Disable the SDIO device.
+ * @retval None
+ */
+#define __SDIO_DISABLE() (*(__IO uint32_t *)CLKCR_CLKEN_BB = DISABLE)
+
+/**
+ * @brief Enable the SDIO DMA transfer.
+ * @retval None
+ */
+#define __SDIO_DMA_ENABLE() (*(__IO uint32_t *)DCTRL_DMAEN_BB = ENABLE)
+
+/**
+ * @brief Disable the SDIO DMA transfer.
+ * @retval None
+ */
+#define __SDIO_DMA_DISABLE() (*(__IO uint32_t *)DCTRL_DMAEN_BB = DISABLE)
+
+/**
+ * @brief Enable the SDIO device interrupt.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __INTERRUPT__ : specifies the SDIO interrupt sources to be enabled.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval None
+ */
+#define __SDIO_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the SDIO device interrupt.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __INTERRUPT__ : specifies the SDIO interrupt sources to be disabled.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval None
+ */
+#define __SDIO_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK &= ~(__INTERRUPT__))
+
+/**
+ * @brief Checks whether the specified SDIO flag is set or not.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDIO_FLAG_DTIMEOUT: Data timeout
+ * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
+ * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode.
+ * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDIO_FLAG_CMDACT: Command transfer in progress
+ * @arg SDIO_FLAG_TXACT: Data transmit in progress
+ * @arg SDIO_FLAG_RXACT: Data receive in progress
+ * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
+ * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
+ * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full
+ * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full
+ * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty
+ * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty
+ * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO
+ * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO
+ * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval The new state of SDIO_FLAG (SET or RESET).
+ */
+#define __SDIO_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->STA &(__FLAG__)) != RESET)
+
+
+/**
+ * @brief Clears the SDIO pending flags.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDIO_FLAG_DTIMEOUT: Data timeout
+ * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
+ * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode
+ * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval None
+ */
+#define __SDIO_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->ICR = (__FLAG__))
+
+/**
+ * @brief Checks whether the specified SDIO interrupt has occurred or not.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __INTERRUPT__: specifies the SDIO interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval The new state of SDIO_IT (SET or RESET).
+ */
+#define __SDIO_GET_IT (__INSTANCE__, __INTERRUPT__) (((__INSTANCE__)->STA &(__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+ * @brief Clears the SDIO's interrupt pending bits.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIO_DCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval None
+ */
+#define __SDIO_CLEAR_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->ICR = (__INTERRUPT__))
+
+/**
+ * @brief Enable Start the SD I/O Read Wait operation.
+ * @retval None
+ */
+#define __SDIO_START_READWAIT_ENABLE() (*(__IO uint32_t *) DCTRL_RWSTART_BB = ENABLE)
+
+/**
+ * @brief Disable Start the SD I/O Read Wait operations.
+ * @retval None
+ */
+#define __SDIO_START_READWAIT_DISABLE() (*(__IO uint32_t *) DCTRL_RWSTART_BB = DISABLE)
+
+/**
+ * @brief Enable Start the SD I/O Read Wait operation.
+ * @retval None
+ */
+#define __SDIO_STOP_READWAIT_ENABLE() (*(__IO uint32_t *) DCTRL_RWSTOP_BB = ENABLE)
+
+/**
+ * @brief Disable Stop the SD I/O Read Wait operations.
+ * @retval None
+ */
+#define __SDIO_STOP_READWAIT_DISABLE() (*(__IO uint32_t *) DCTRL_RWSTOP_BB = DISABLE)
+
+/**
+ * @brief Enable the SD I/O Mode Operation.
+ * @retval None
+ */
+#define __SDIO_OPERATION_ENABLE() (*(__IO uint32_t *) DCTRL_SDIOEN_BB = ENABLE)
+
+/**
+ * @brief Disable the SD I/O Mode Operation.
+ * @retval None
+ */
+#define __SDIO_OPERATION_DISABLE() (*(__IO uint32_t *) DCTRL_SDIOEN_BB = DISABLE)
+
+/**
+ * @brief Enable the SD I/O Suspend command sending.
+ * @retval None
+ */
+#define __SDIO_SUSPEND_CMD_ENABLE() (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = ENABLE)
+
+/**
+ * @brief Disable the SD I/O Suspend command sending.
+ * @retval None
+ */
+#define __SDIO_SUSPEND_CMD_DISABLE() (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = DISABLE)
+
+#if !defined(STM32F446xx)
+/**
+ * @brief Enable the command completion signal.
+ * @retval None
+ */
+#define __SDIO_CEATA_CMD_COMPLETION_ENABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = ENABLE)
+
+/**
+ * @brief Disable the command completion signal.
+ * @retval None
+ */
+#define __SDIO_CEATA_CMD_COMPLETION_DISABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = DISABLE)
+
+/**
+ * @brief Enable the CE-ATA interrupt.
+ * @retval None
+ */
+#define __SDIO_CEATA_ENABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)0)
+
+/**
+ * @brief Disable the CE-ATA interrupt.
+ * @retval None
+ */
+#define __SDIO_CEATA_DISABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)1)
+
+/**
+ * @brief Enable send CE-ATA command (CMD61).
+ * @retval None
+ */
+#define __SDIO_CEATA_SENDCMD_ENABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = ENABLE)
+
+/**
+ * @brief Disable send CE-ATA command (CMD61).
+ * @retval None
+ */
+#define __SDIO_CEATA_SENDCMD_DISABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = DISABLE)
+#endif /* !defined(STM32F446xx) */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SDMMC_LL_Exported_Functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions **********************************/
+/** @addtogroup HAL_SDMMC_LL_Group1
+ * @{
+ */
+HAL_StatusTypeDef SDIO_Init(SDIO_TypeDef *SDIOx, SDIO_InitTypeDef Init);
+/**
+ * @}
+ */
+
+/* I/O operation functions *****************************************************/
+/** @addtogroup HAL_SDMMC_LL_Group2
+ * @{
+ */
+/* Blocking mode: Polling */
+uint32_t SDIO_ReadFIFO(SDIO_TypeDef *SDIOx);
+HAL_StatusTypeDef SDIO_WriteFIFO(SDIO_TypeDef *SDIOx, uint32_t *pWriteData);
+/**
+ * @}
+ */
+
+/* Peripheral Control functions ************************************************/
+/** @addtogroup HAL_SDMMC_LL_Group3
+ * @{
+ */
+HAL_StatusTypeDef SDIO_PowerState_ON(SDIO_TypeDef *SDIOx);
+HAL_StatusTypeDef SDIO_PowerState_OFF(SDIO_TypeDef *SDIOx);
+uint32_t SDIO_GetPowerState(SDIO_TypeDef *SDIOx);
+
+/* Command path state machine (CPSM) management functions */
+HAL_StatusTypeDef SDIO_SendCommand(SDIO_TypeDef *SDIOx, SDIO_CmdInitTypeDef *SDIO_CmdInitStruct);
+uint8_t SDIO_GetCommandResponse(SDIO_TypeDef *SDIOx);
+uint32_t SDIO_GetResponse(uint32_t SDIO_RESP);
+
+/* Data path state machine (DPSM) management functions */
+HAL_StatusTypeDef SDIO_DataConfig(SDIO_TypeDef *SDIOx, SDIO_DataInitTypeDef* SDIO_DataInitStruct);
+uint32_t SDIO_GetDataCounter(SDIO_TypeDef *SDIOx);
+uint32_t SDIO_GetFIFOCount(SDIO_TypeDef *SDIOx);
+
+/* SDIO IO Cards mode management functions */
+HAL_StatusTypeDef SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_LL_SDMMC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/stm32f4xx_ll_usb.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,463 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_usb.h
+ * @author MCD Application Team
+ * @version V1.3.0
+ * @date 09-March-2015
+ * @brief Header file of USB Core HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_LL_USB_H
+#define __STM32F4xx_LL_USB_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL
+ * @{
+ */
+
+/** @addtogroup USB_Core
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief USB Mode definition
+ */
+typedef enum
+{
+ USB_OTG_DEVICE_MODE = 0,
+ USB_OTG_HOST_MODE = 1,
+ USB_OTG_DRD_MODE = 2
+
+}USB_OTG_ModeTypeDef;
+
+/**
+ * @brief URB States definition
+ */
+typedef enum {
+ URB_IDLE = 0,
+ URB_DONE,
+ URB_NOTREADY,
+ URB_NYET,
+ URB_ERROR,
+ URB_STALL
+
+}USB_OTG_URBStateTypeDef;
+
+/**
+ * @brief Host channel States definition
+ */
+typedef enum {
+ HC_IDLE = 0,
+ HC_XFRC,
+ HC_HALTED,
+ HC_NAK,
+ HC_NYET,
+ HC_STALL,
+ HC_XACTERR,
+ HC_BBLERR,
+ HC_DATATGLERR
+
+}USB_OTG_HCStateTypeDef;
+
+/**
+ * @brief PCD Initialization Structure definition
+ */
+typedef struct
+{
+ uint32_t dev_endpoints; /*!< Device Endpoints number.
+ This parameter depends on the used USB core.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint32_t Host_channels; /*!< Host Channels number.
+ This parameter Depends on the used USB core.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint32_t speed; /*!< USB Core speed.
+ This parameter can be any value of @ref USB_Core_Speed_ */
+
+ uint32_t dma_enable; /*!< Enable or disable of the USB embedded DMA. */
+
+ uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size.
+ This parameter can be any value of @ref USB_EP0_MPS_ */
+
+ uint32_t phy_itface; /*!< Select the used PHY interface.
+ This parameter can be any value of @ref USB_Core_PHY_ */
+
+ uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */
+
+ uint32_t low_power_enable; /*!< Enable or disable the low power mode. */
+
+ uint32_t lpm_enable; /*!< Enable or disable Link Power Management. */
+
+ uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */
+
+ uint32_t use_dedicated_ep1; /*!< Enable or disable the use of the dedicated EP1 interrupt. */
+
+ uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */
+
+}USB_OTG_CfgTypeDef;
+
+typedef struct
+{
+ uint8_t num; /*!< Endpoint number
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint8_t is_in; /*!< Endpoint direction
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t is_stall; /*!< Endpoint stall condition
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t type; /*!< Endpoint type
+ This parameter can be any value of @ref USB_EP_Type_ */
+
+ uint8_t data_pid_start; /*!< Initial data PID
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t even_odd_frame; /*!< IFrame parity
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint16_t tx_fifo_num; /*!< Transmission FIFO number
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint32_t maxpacket; /*!< Endpoint Max packet size
+ This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
+
+ uint8_t *xfer_buff; /*!< Pointer to transfer buffer */
+
+ uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */
+
+ uint32_t xfer_len; /*!< Current transfer length */
+
+ uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */
+
+}USB_OTG_EPTypeDef;
+
+typedef struct
+{
+ uint8_t dev_addr ; /*!< USB device address.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 255 */
+
+ uint8_t ch_num; /*!< Host channel number.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint8_t ep_num; /*!< Endpoint number.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint8_t ep_is_in; /*!< Endpoint direction
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t speed; /*!< USB Host speed.
+ This parameter can be any value of @ref USB_Core_Speed_ */
+
+ uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */
+
+ uint8_t process_ping; /*!< Execute the PING protocol for HS mode. */
+
+ uint8_t ep_type; /*!< Endpoint Type.
+ This parameter can be any value of @ref USB_EP_Type_ */
+
+ uint16_t max_packet; /*!< Endpoint Max packet size.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
+
+ uint8_t data_pid; /*!< Initial data PID.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */
+
+ uint32_t xfer_len; /*!< Current transfer length. */
+
+ uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */
+
+ uint8_t toggle_in; /*!< IN transfer current toggle flag.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t toggle_out; /*!< OUT transfer current toggle flag
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */
+
+ uint32_t ErrCnt; /*!< Host channel error count.*/
+
+ USB_OTG_URBStateTypeDef urb_state; /*!< URB state.
+ This parameter can be any value of @ref USB_OTG_URBStateTypeDef */
+
+ USB_OTG_HCStateTypeDef state; /*!< Host Channel state.
+ This parameter can be any value of @ref USB_OTG_HCStateTypeDef */
+
+}USB_OTG_HCTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup PCD_Exported_Constants PCD Exported Constants
+ * @{
+ */
+
+/** @defgroup USB_Core_Mode_ USB Core Mode
+ * @{
+ */
+#define USB_OTG_MODE_DEVICE 0
+#define USB_OTG_MODE_HOST 1
+#define USB_OTG_MODE_DRD 2
+/**
+ * @}
+ */
+
+/** @defgroup USB_Core_Speed_ USB Core Speed
+ * @{
+ */
+#define USB_OTG_SPEED_HIGH 0
+#define USB_OTG_SPEED_HIGH_IN_FULL 1
+#define USB_OTG_SPEED_LOW 2
+#define USB_OTG_SPEED_FULL 3
+/**
+ * @}
+ */
+
+/** @defgroup USB_Core_PHY_ USB Core PHY
+ * @{
+ */
+#define USB_OTG_ULPI_PHY 1
+#define USB_OTG_EMBEDDED_PHY 2
+/**
+ * @}
+ */
+
+/** @defgroup USB_Core_MPS_ USB Core MPS
+ * @{
+ */
+#define USB_OTG_HS_MAX_PACKET_SIZE 512
+#define USB_OTG_FS_MAX_PACKET_SIZE 64
+#define USB_OTG_MAX_EP0_SIZE 64
+/**
+ * @}
+ */
+
+/** @defgroup USB_Core_Phy_Frequency_ USB Core Phy Frequency
+ * @{
+ */
+#define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ (0 << 1)
+#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1 << 1)
+#define DSTS_ENUMSPD_LS_PHY_6MHZ (2 << 1)
+#define DSTS_ENUMSPD_FS_PHY_48MHZ (3 << 1)
+/**
+ * @}
+ */
+
+/** @defgroup USB_CORE_Frame_Interval_ USB CORE Frame Interval
+ * @{
+ */
+#define DCFG_FRAME_INTERVAL_80 0
+#define DCFG_FRAME_INTERVAL_85 1
+#define DCFG_FRAME_INTERVAL_90 2
+#define DCFG_FRAME_INTERVAL_95 3
+/**
+ * @}
+ */
+
+/** @defgroup USB_EP0_MPS_ USB EP0 MPS
+ * @{
+ */
+#define DEP0CTL_MPS_64 0
+#define DEP0CTL_MPS_32 1
+#define DEP0CTL_MPS_16 2
+#define DEP0CTL_MPS_8 3
+/**
+ * @}
+ */
+
+/** @defgroup USB_EP_Speed_ USB EP Speed
+ * @{
+ */
+#define EP_SPEED_LOW 0
+#define EP_SPEED_FULL 1
+#define EP_SPEED_HIGH 2
+/**
+ * @}
+ */
+
+/** @defgroup USB_EP_Type_ USB EP Type
+ * @{
+ */
+#define EP_TYPE_CTRL 0
+#define EP_TYPE_ISOC 1
+#define EP_TYPE_BULK 2
+#define EP_TYPE_INTR 3
+#define EP_TYPE_MSK 3
+/**
+ * @}
+ */
+
+/** @defgroup USB_STS_Defines_ USB STS Defines
+ * @{
+ */
+#define STS_GOUT_NAK 1
+#define STS_DATA_UPDT 2
+#define STS_XFER_COMP 3
+#define STS_SETUP_COMP 4
+#define STS_SETUP_UPDT 6
+/**
+ * @}
+ */
+
+/** @defgroup HCFG_SPEED_Defines_ HCFG SPEED Defines
+ * @{
+ */
+#define HCFG_30_60_MHZ 0
+#define HCFG_48_MHZ 1
+#define HCFG_6_MHZ 2
+/**
+ * @}
+ */
+
+/** @defgroup HPRT0_PRTSPD_SPEED_Defines_ HPRT0 PRTSPD SPEED Defines
+ * @{
+ */
+#define HPRT0_PRTSPD_HIGH_SPEED 0
+#define HPRT0_PRTSPD_FULL_SPEED 1
+#define HPRT0_PRTSPD_LOW_SPEED 2
+/**
+ * @}
+ */
+
+#define HCCHAR_CTRL 0
+#define HCCHAR_ISOC 1
+#define HCCHAR_BULK 2
+#define HCCHAR_INTR 3
+
+#define HC_PID_DATA0 0
+#define HC_PID_DATA2 1
+#define HC_PID_DATA1 2
+#define HC_PID_SETUP 3
+
+#define GRXSTS_PKTSTS_IN 2
+#define GRXSTS_PKTSTS_IN_XFER_COMP 3
+#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5
+#define GRXSTS_PKTSTS_CH_HALTED 7
+
+#define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_PCGCCTL_BASE)
+#define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_HOST_PORT_BASE)
+
+#define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)((uint32_t )USBx + USB_OTG_DEVICE_BASE))
+#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)((uint32_t)USBx + USB_OTG_IN_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
+#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)((uint32_t)USBx + USB_OTG_OUT_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
+#define USBx_DFIFO(i) *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_FIFO_BASE + (i) * USB_OTG_FIFO_SIZE)
+
+#define USBx_HOST ((USB_OTG_HostTypeDef *)((uint32_t )USBx + USB_OTG_HOST_BASE))
+#define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)((uint32_t)USBx + USB_OTG_HOST_CHANNEL_BASE + (i)*USB_OTG_HOST_CHANNEL_SIZE))
+/**
+ * @}
+ */
+/* Exported macro ------------------------------------------------------------*/
+#define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__))
+#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__))
+
+#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__))
+#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__))
+
+/* Exported functions --------------------------------------------------------*/
+HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init);
+HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init);
+HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_OTG_ModeTypeDef mode);
+HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed);
+HAL_StatusTypeDef USB_FlushRxFifo (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num );
+HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma);
+HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma);
+HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len, uint8_t dma);
+void * USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len);
+HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address);
+HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup);
+uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum);
+uint32_t USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum);
+void USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt);
+
+HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
+HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq);
+HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state);
+uint32_t USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx,
+ uint8_t ch_num,
+ uint8_t epnum,
+ uint8_t dev_address,
+ uint8_t speed,
+ uint8_t ep_type,
+ uint16_t mps);
+HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma);
+uint32_t USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num);
+HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num);
+HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_LL_USB_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_DRAGONFLY_F411RE/system_stm32f4xx.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,123 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f4xx.h
+ * @author MCD Application Team
+ * @version V2.3.0
+ * @date 02-March-2015
+ * @brief CMSIS Cortex-M4 Device System Source File for STM32F4xx devices.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f4xx_system
+ * @{
+ */
+
+/**
+ * @brief Define to prevent recursive inclusion
+ */
+#ifndef __SYSTEM_STM32F4XX_H
+#define __SYSTEM_STM32F4XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32F4xx_System_Includes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup STM32F4xx_System_Exported_types
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetSysClockFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Exported_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Exported_Functions
+ * @{
+ */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+extern void SetSysClock(void);
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F4XX_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_adc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_can.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cec.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_crc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dac.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dcmi_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_eth.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_fmpi2c.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_fmpi2c_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hash.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_irda.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_msp_template.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_nand.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_nor.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_qspi.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rng.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sai.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sai_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sd.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_spdifrx.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_spi.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sram.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_tim.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_uart.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_usart.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_usb.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/system_stm32f4xx.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_can.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cec.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_crc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dcmi_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_eth.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_fmpi2c.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_fmpi2c_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_irda.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_msp_template.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nand.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nor.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_qspi.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rng.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sai.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sai_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sd.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_spdifrx.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_spi.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sram.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_uart.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_usart.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_ll_usb.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/system_stm32f4xx.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/startup_stm32f405xx.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_adc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_can.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_cec.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_crc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_dac.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_dcmi_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_dma.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_eth.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_flash.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_fmpi2c.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_fmpi2c_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_hash.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_irda.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_msp_template.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_nand.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_nor.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_qspi.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_rng.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_sai.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_sai_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_sd.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_spdifrx.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_spi.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_sram.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_tim.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_uart.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_usart.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_ll_usb.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/system_stm32f4xx.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_adc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_can.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cec.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_crc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dac.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dcmi_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_eth.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_fmpi2c.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_fmpi2c_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hash.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_irda.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_msp_template.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_nand.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_nor.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_qspi.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rng.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sai.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sai_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sd.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_spdifrx.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_spi.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sram.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_tim.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_uart.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_usart.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_usb.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/system_stm32f4xx.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_can.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cec.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_crc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dcmi_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_eth.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_fmpi2c.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_fmpi2c_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_irda.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_msp_template.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nand.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nor.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_qspi.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rng.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sai.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sai_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sd.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_spdifrx.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_spi.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sram.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_uart.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_usart.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_usb.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/system_stm32f4xx.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/startup_stm32f411xe.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_adc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_can.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_cec.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_crc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dac.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dcmi_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dma.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_eth.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_flash.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_fmpi2c.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_fmpi2c_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_hash.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_irda.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_msp_template.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_nand.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_nor.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_qspi.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_rng.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_sai.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_sai_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_sd.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_spdifrx.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_spi.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_sram.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_tim.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_uart.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_usart.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_ll_usb.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/system_stm32f4xx.o has changed
Binary file TARGET_NRF51822/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NRF51822/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NRF51822/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NRF51822/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NRF51822/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NRF51822/TOOLCHAIN_ARM_STD/system_nrf51.o has changed
Binary file TARGET_NRF51822/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NRF51822/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_NRF51822/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_NRF51822/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_NRF51822/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_NRF51822/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_NRF51822/TOOLCHAIN_IAR/startup_NRF51822_IAR.o has changed
Binary file TARGET_NRF51822/TOOLCHAIN_IAR/system_nrf51.o has changed
Binary file TARGET_NRF51_DK/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NRF51_DK/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NRF51_DK/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NRF51_DK/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NRF51_DK/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NRF51_DK/TOOLCHAIN_ARM_STD/system_nrf51.o has changed
Binary file TARGET_NRF51_DK/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NRF51_DK/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_NRF51_DK/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_NRF51_DK/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_NRF51_DK/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_NRF51_DK/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_NRF51_DK/TOOLCHAIN_IAR/startup_NRF51822_IAR.o has changed
Binary file TARGET_NRF51_DK/TOOLCHAIN_IAR/system_nrf51.o has changed
Binary file TARGET_NRF51_DONGLE/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NRF51_DONGLE/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NRF51_DONGLE/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NRF51_DONGLE/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NRF51_DONGLE/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NRF51_DONGLE/TOOLCHAIN_ARM_STD/system_nrf51.o has changed
Binary file TARGET_NRF51_DONGLE/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NRF51_DONGLE/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_NRF51_DONGLE/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_NRF51_DONGLE/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_NRF51_DONGLE/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_NRF51_DONGLE/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_NRF51_DONGLE/TOOLCHAIN_IAR/startup_NRF51822_IAR.o has changed
Binary file TARGET_NRF51_DONGLE/TOOLCHAIN_IAR/system_nrf51.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/system_stm32f0xx.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/system_stm32f0xx.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/startup_stm32f030x8.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/system_stm32f0xx.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/system_stm32f0xx.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/system_stm32f0xx.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/startup_stm32f070xb.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/system_stm32f0xx.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/system_stm32f0xx.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/system_stm32f0xx.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/startup_stm32f072xb.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/system_stm32f0xx.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/system_stm32f0xx.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/system_stm32f0xx.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/startup_stm32f091xc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/system_stm32f0xx.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_eth.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_gpio_ex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_hcd.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_spi_ex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f1xx_ll_usb.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/system_stm32f1xx.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_eth.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_gpio_ex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_hcd.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_spi_ex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f1xx_ll_usb.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/system_stm32f1xx.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/startup_stm32f103xb.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/startup_stm32f103xb.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_eth.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_gpio_ex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_hcd.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_spi_ex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f1xx_ll_usb.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/system_stm32f1xx.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_hrtim.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_sdadc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/system_stm32f3xx.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_hrtim.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_sdadc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/system_stm32f3xx.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/startup_stm32f302x8.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_hrtim.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_sdadc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/system_stm32f3xx.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_hrtim.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_sdadc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/system_stm32f3xx.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_hrtim.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_sdadc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/system_stm32f3xx.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/startup_stm32f303xe.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_hrtim.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_sdadc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/system_stm32f3xx.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_hrtim.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_sdadc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/system_stm32f3xx.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_hrtim.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_sdadc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/system_stm32f3xx.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/startup_stm32f334x8.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_hrtim.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_sdadc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/system_stm32f3xx.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dcmi_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_eth.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_fmpi2c.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_fmpi2c_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hash.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_msp_template.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_qspi.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rng.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sai.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sai_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_spdifrx.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_usb.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/system_stm32f4xx.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dcmi_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_eth.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_fmpi2c.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_fmpi2c_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_msp_template.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_qspi.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rng.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sai.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sai_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_spdifrx.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_usb.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/system_stm32f4xx.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/startup_stm32f401xe.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_dcmi_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_eth.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_fmpi2c.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_fmpi2c_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_hash.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_msp_template.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_qspi.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_rng.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_sai.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_sai_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_spdifrx.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_ll_usb.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/system_stm32f4xx.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dcmi_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_eth.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_fmpi2c.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_fmpi2c_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hash.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_msp_template.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_qspi.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rng.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sai.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sai_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_spdifrx.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_usb.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/system_stm32f4xx.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dcmi_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_eth.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_fmpi2c.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_fmpi2c_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_msp_template.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_qspi.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rng.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sai.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sai_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_spdifrx.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_usb.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/system_stm32f4xx.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/startup_stm32f411xe.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dcmi_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_eth.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_fmpi2c.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_fmpi2c_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_hash.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_msp_template.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_qspi.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_rng.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_sai.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_sai_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_spdifrx.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_ll_usb.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/system_stm32f4xx.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_comp_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_firewall.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_lcd.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_lptim.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_rng.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/system_stm32l0xx.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_comp_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_firewall.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_lcd.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_lptim.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_rng.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/system_stm32l0xx.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/startup_stm32l053xx.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_comp_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_firewall.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_lcd.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_lptim.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_rng.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/system_stm32l0xx.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_lcd.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_spi_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/system_stm32l1xx.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_lcd.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_spi_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/system_stm32l1xx.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/startup_stm32l152xe.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/startup_stm32l152xe.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_lcd.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_spi_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/system_stm32l1xx.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_ARM_MICRO/system_LPC11Uxx.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_ARM_STD/system_LPC11Uxx.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_IAR/startup_LPC11xx.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_IAR/system_LPC11Uxx.o has changed
Binary file TARGET_RBLAB_BLENANO/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_RBLAB_BLENANO/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_RBLAB_BLENANO/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_RBLAB_BLENANO/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_RBLAB_BLENANO/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_RBLAB_BLENANO/TOOLCHAIN_ARM_STD/system_nrf51.o has changed
Binary file TARGET_RBLAB_BLENANO/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_RBLAB_NRF51822/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_RBLAB_NRF51822/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_RBLAB_NRF51822/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_RBLAB_NRF51822/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_RBLAB_NRF51822/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_RBLAB_NRF51822/TOOLCHAIN_ARM_STD/system_nrf51.o has changed
Binary file TARGET_RBLAB_NRF51822/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_RZ_A1H/TOOLCHAIN_ARM_STD/RZ_A1_Init.o has changed
Binary file TARGET_RZ_A1H/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_RZ_A1H/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_RZ_A1H/TOOLCHAIN_ARM_STD/gic.o has changed
Binary file TARGET_RZ_A1H/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_RZ_A1H/TOOLCHAIN_ARM_STD/mbed_sf_boot.o has changed
Binary file TARGET_RZ_A1H/TOOLCHAIN_ARM_STD/mmu_Renesas_RZ_A1.o has changed
Binary file TARGET_RZ_A1H/TOOLCHAIN_ARM_STD/nvic_wrapper.o has changed
Binary file TARGET_RZ_A1H/TOOLCHAIN_ARM_STD/pl310.o has changed
Binary file TARGET_RZ_A1H/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_RZ_A1H/TOOLCHAIN_ARM_STD/rza_io_regrw.o has changed
Binary file TARGET_RZ_A1H/TOOLCHAIN_ARM_STD/system_MBRZA1H.o has changed
Binary file TARGET_RZ_A1H/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_SEEED_TINY_BLE/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_SEEED_TINY_BLE/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_SEEED_TINY_BLE/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_SEEED_TINY_BLE/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_SEEED_TINY_BLE/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_SEEED_TINY_BLE/TOOLCHAIN_ARM_STD/system_nrf51.o has changed
Binary file TARGET_SEEED_TINY_BLE/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_SEEED_TINY_BLE/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_SEEED_TINY_BLE/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_SEEED_TINY_BLE/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_SEEED_TINY_BLE/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_SEEED_TINY_BLE/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_SEEED_TINY_BLE/TOOLCHAIN_IAR/startup_NRF51822_IAR.o has changed
Binary file TARGET_SEEED_TINY_BLE/TOOLCHAIN_IAR/system_nrf51.o has changed
Binary file TARGET_SSCI824/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_SSCI824/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_SSCI824/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_SSCI824/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_SSCI824/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_SSCI824/TOOLCHAIN_ARM_MICRO/system_LPC8xx.o has changed
Binary file TARGET_SSCI824/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_TEENSY3_1/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_TEENSY3_1/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_TEENSY3_1/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_TEENSY3_1/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_TEENSY3_1/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_TEENSY3_1/TOOLCHAIN_ARM_STD/system_MK20DX256.o has changed
Binary file TARGET_TEENSY3_1/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/system_LPC17xx.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_CS/libmbed.a has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/startup_LPC17xx.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/system_LPC17xx.o has changed
Binary file TARGET_WALLBOT_BLE/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_WALLBOT_BLE/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_WALLBOT_BLE/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_WALLBOT_BLE/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_WALLBOT_BLE/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_WALLBOT_BLE/TOOLCHAIN_ARM_STD/system_nrf51.o has changed
Binary file TARGET_WALLBOT_BLE/TOOLCHAIN_GCC_ARM/libmbed.a has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_WIZwiki_W7500/TARGET_WIZNET/TARGET_W7500x/PeripheralPins.h Tue Jun 09 14:29:26 2015 +0100 @@ -0,0 +1,56 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2015 WIZnet Co.,Ltd. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of ARM Limited nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_PERIPHERALPINS_H +#define MBED_PERIPHERALPINS_H + +#include "pinmap.h" +#include "PeripheralNames.h" + + +//*** ADC *** +extern const PinMap PinMap_ADC[]; + +//*** SERIAL *** +extern const PinMap PinMap_UART_TX[]; +extern const PinMap PinMap_UART_RX[]; + +//*** I2C *** +extern const PinMap PinMap_I2C_SDA[]; +extern const PinMap PinMap_I2C_SCL[]; + + +//*** SPI *** + +extern const PinMap PinMap_SPI_SCLK[]; +extern const PinMap PinMap_SPI_MOSI[]; +extern const PinMap PinMap_SPI_MISO[]; +extern const PinMap PinMap_SPI_SSEL[]; +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZwiki_W7500/TARGET_WIZNET/TARGET_W7500x/TARGET_WIZwiki_W7500/PeripheralNames.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,77 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015 WIZnet Co.,Ltd. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of ARM Limited nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+#include "PinNames.h"
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_0 = (int)W7500x_ADC_BASE
+} ADCName;
+
+typedef enum {
+ UART_0 = (int)W7500x_UART0_BASE,
+ UART_1 = (int)W7500x_UART1_BASE
+} UARTName;
+
+#define STDIO_UART_TX PC_2
+#define STDIO_UART_RX PC_3
+#define STDIO_UART UART_1
+
+typedef enum {
+ SPI_0 = (int)SSP0_BASE,
+ SPI_1 = (int)SSP1_BASE
+} SPIName;
+
+typedef enum {
+ I2C_0 = (int)I2C0_BASE,
+ I2C_1 = (int)I2C1_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = 0
+// PWM_1 = (int)TIM1_BASE,
+// PWM_3 = (int)TIM3_BASE,
+// PWM_14 = (int)TIM14_BASE,
+// PWM_15 = (int)TIM15_BASE,
+// PWM_16 = (int)TIM16_BASE,
+// PWM_17 = (int)TIM17_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZwiki_W7500/TARGET_WIZNET/TARGET_W7500x/TARGET_WIZwiki_W7500/PinNames.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,197 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015 WIZnet Co.,Ltd. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of ARM Limited nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+// See W7500x_hal_gpio.h for values of MODE, PUPD and AFNUM
+#define WIZ_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 8) | ((PUPD) << 4) | ((MODE) << 0)))
+#define WIZ_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define WIZ_PIN_PUPD(X) (((X) >> 4) & 0x0F)
+#define WIZ_PIN_AFNUM(X) (((X) >> 8) & 0x0F)
+#define WIZ_MODE_INPUT (0)
+#define WIZ_MODE_OUTPUT (1)
+#define WIZ_MODE_AF (2)
+
+#define WIZ_GPIO_NOPULL (0) /*!< No Pull-up or Pull-down activation */
+#define WIZ_GPIO_PULLDOWN (1) /*!< Pull-down activation */
+#define WIZ_GPIO_PULLUP (2) /*!< Pull-up activation */
+#define WIZ_GPIO_OPEN_DRAIN (3) /*!< Open Drain activation */
+
+
+#define WIZ_AFNUM(X)(((uint32_t)(X) >> 8) & 0xF) // AF number (0=AF0, 1=AF1, 2=AF2, 3=AF3)
+#define WIZ_PORT(X) (((uint32_t)(X) >> 4) & 0xF) // port number (0=A, 1=B, 2=C, 3=D)
+#define WIZ_PIN(X) ((uint32_t)(X) & 0xF) // pin number
+
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+
+typedef enum {
+ // W7500x Pin Names (AF[9:8] + PORT[5:4] + PIN[3:0])
+
+ PA_0 = 0x000,
+ PA_1 = 0x001,
+ PA_2 = 0x002,
+ PA_3 = 0x003,
+ PA_4 = 0x004,
+ PA_5 = 0x005,
+ PA_6 = 0x006,
+ PA_7 = 0x007,
+ PA_8 = 0x008,
+ PA_9 = 0x009,
+ PA_10 = 0x00A,
+ PA_11 = 0x00B,
+ PA_12 = 0x00C,
+ PA_13 = 0x00D,
+ PA_14 = 0x00E,
+ PA_15 = 0x00F,
+
+ PB_0 = 0x010, //SSEL1/SD_SEL
+ PB_1 = 0x011, //SCLK1/SD_CLK
+ PB_2 = 0x012, //MISO1/SD_MISO
+ PB_3 = 0x013, //MOSI1/SD_MOSI
+ PB_4 = 0x014,
+ PB_5 = 0x015,
+ PB_6 = 0x016,
+ PB_7 = 0x017,
+ PB_8 = 0x018,
+ PB_9 = 0x019,
+ PB_10 = 0x01A,
+ PB_11 = 0x01B,
+ PB_12 = 0x01C,
+ PB_13 = 0x01D,
+ PB_14 = 0x01E,
+ PB_15 = 0x01F,
+
+ PC_0 = 0x120, // 0xx:U_CTS1, 1xx:GPIOC_0, 2xx:PWM0
+ PC_1 = 0x121, // 0xx:U_RTS1, 1xx:GPIOC_1, 2xx:PWM1
+ PC_2 = 0x022,
+ PC_3 = 0x023,
+ PC_4 = 0x124, // 0xx:SDA1, 1xx:GPIOC_4, 2xx:PWM4
+ PC_5 = 0x025,
+ PC_6 = 0x026,
+ PC_7 = 0x027,
+ PC_8 = 0x128, // 0xx:PWM0, 1xx:GPIOC_8, 2xx:SCL0, 3xx:AIN7
+ PC_9 = 0x129, // 0xx:PWM1, 1xx:GPIOC_9, 2xx:SDA0, 3xx:AIN6
+
+ PC_10 = 0x32A, // 0xx:U_TXD2, 1xx:GPIOC_10, 2xx:PWM2, 3xx:AIN5
+ PC_11 = 0x32B, // 0xx:U_RXD2, 1xx:GPIOC_11, 2xx:PWM3, 3xx:AIN4
+ PC_12 = 0x32C, // 0xx:AIN3, 1xx:GPIOC_12, 2xx:SSEL0, 3xx:AIN3
+ PC_13 = 0x32D, // 0xx:AIN2, 1xx:GPIOC_13, 2xx:SCLK0, 3xx:AIN2
+ PC_14 = 0x32E, // 0xx:AIN1, 1xx:GPIOC_14, 2xx:MISO0, 3xx:AIN1
+ PC_15 = 0x32F, // 0xx:AIN0, 1xx:GPIOC_15, 2xx:MOSI0, 3xx:AIN0
+
+ PD_0 = 0x030,
+ PD_1 = 0x031,
+ PD_2 = 0x032,
+ PD_3 = 0x033,
+ PD_4 = 0x034,
+
+
+ // Arduino connector namings
+ A0 = PC_15, // AIN0
+ A1 = PC_14, // AIN1
+ A2 = PC_13, // AIN2
+ A3 = PC_12, // AIN3
+ A4 = PC_11, // AIN4
+ A5 = PC_10, // AIN5
+ D0 = PA_14, // U_TXD0
+ D1 = PA_13, // U_RXD0
+ D2 = PC_1, // GPIOC_1, EXTI
+ D3 = PC_0, // GPIOC_0, EXTI
+ D4 = PA_2, // GPIOA_2,
+ D5 = PA_1, // GPIOA_1,
+ D6 = PA_0, // GPIOA_0,
+ D7 = PC_6, // GPIOC_6, EXTI
+ D8 = PC_7, // GPIOC_7, EXTI
+ D9 = PC_4, // GPIOC_4, EXTI
+ D10 = PA_5, // SSEL0
+ D11 = PA_8, // MOSI0
+ D12 = PA_7, // MISO0
+ D13 = PA_6, // SCLK0
+ D14 = PA_10, // SDA0
+ D15 = PA_9, // SCL0
+
+ // Generic signals namings
+ LED_RED = PC_8,
+ LED_GREEN = PC_9,
+ LED_BLUE = PC_5,
+
+ LED1 = LED_RED,
+ LED2 = LED_GREEN,
+ LED3 = LED_BLUE,
+ LED4 = LED_BLUE,
+
+// USER_BUTTON = PC_13,
+ SERIAL_TX = PC_2, // U_TXD1
+ SERIAL_RX = PC_3, // U_RXD1
+ USBTX = SERIAL_TX,
+ USBRX = SERIAL_RX,
+ I2C_SCL = PA_9, // SCL0
+ I2C_SDA = PA_10, // SDA0
+ SPI_MOSI = PA_8, // MISO0
+ SPI_MISO = PA_7, // MOSI0
+ SPI_SCK = PA_9, // SCL0
+ SPI_CS = PA_5, // SSEL0
+ SD_SEL = PB_0, // SSEL1
+ SD_CLK = PB_1, // SCL1
+ SD_MISO = PB_2, // MOSI1
+ SD_MOSI = PB_3, // MISO1
+// PWM_OUT = PC_7,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullDown = 1,
+ PullUp = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZwiki_W7500/TARGET_WIZNET/TARGET_W7500x/TARGET_WIZwiki_W7500/PortNames.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,48 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015 WIZnet Co.,Ltd. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of ARM Limited nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_WIZwiki_W7500/TARGET_WIZNET/TARGET_W7500x/TARGET_WIZwiki_W7500/device.h Tue Jun 09 14:29:26 2015 +0100 @@ -0,0 +1,74 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2015 WIZnet Co.,Ltd. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of ARM Limited nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 // Not present on this device + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 0 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 0 + +#define DEVICE_PWMOUT 0 + +#define DEVICE_SLEEP 0 + +#define DEVICE_ETHERNET 0 + + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZwiki_W7500/TARGET_WIZNET/TARGET_W7500x/TARGET_WIZwiki_W7500/objects.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,98 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015 WIZnet Co.,Ltd. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of ARM Limited nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+#include "PortNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index; // Used by irq
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+};
+
+struct spi_s {
+ SSP_TypeDef *spi;
+};
+
+struct i2c_s {
+ I2CName i2c;
+ uint16_t ADDRESS;
+ uint16_t is_setAddress;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t period;
+ uint32_t pulse;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZwiki_W7500/TARGET_WIZNET/TARGET_W7500x/gpio_object.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,101 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2015 WIZnet Co.,Ltd. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of ARM Limited nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_GPIO_OBJECT_H
+#define MBED_GPIO_OBJECT_H
+
+#include "mbed_assert.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ uint32_t mask;
+ uint32_t direction;
+ __IO uint32_t *reg_data_in;
+} gpio_t;
+
+
+extern uint32_t Get_GPIO_BaseAddress(uint32_t port_idx);
+
+
+static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
+
+ uint32_t port_index = WIZ_PORT(obj->pin);
+ uint32_t pin_index = WIZ_PIN(obj->pin);
+
+ uint32_t gpio_add = Get_GPIO_BaseAddress(port_index);
+ GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
+
+
+ if (value)
+ {
+ HAL_GPIO_SetBits(gpio,(0x01 << pin_index));
+ }
+ else
+ {
+ HAL_GPIO_ResetBits(gpio,(0x01 << pin_index));
+ }
+}
+
+static inline int gpio_read(gpio_t *obj) {
+ int ret;
+
+ MBED_ASSERT(obj->pin != (PinName)NC);
+
+ uint32_t port_index = WIZ_PORT(obj->pin);
+
+ uint32_t gpio_add = Get_GPIO_BaseAddress(port_index);
+ GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
+
+ if(obj->direction == PIN_OUTPUT)
+ {
+ ret = ( HAL_GPIO_ReadOutputData(gpio) & obj->mask ) ? 1 : 0;
+ }
+ else
+ {
+ ret = ((*obj->reg_data_in & obj->mask) ? 1 : 0);
+ }
+
+ return ret;
+}
+
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_MICRO/W7500.sct Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,15 @@
+; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+LR_IROM1 0x00000000 0x00020000 { ; load region size_region
+ ER_IROM1 0x00000000 0x00020000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+ RW_IRAM1 0x20000000 0x00004000 { ; RW data
+ .ANY (+RW +ZI)
+ }
+}
+
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_MICRO/W7500x_adc.o has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_MICRO/W7500x_crg.o has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_MICRO/W7500x_exti.o has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_MICRO/W7500x_gpio.o has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_MICRO/W7500x_i2c.o has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_MICRO/W7500x_pwm.o has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_MICRO/W7500x_uart.o has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_MICRO/startup_W7500x.o has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_MICRO/system_W7500x.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_STD/W7500.sct Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,15 @@
+; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+LR_IROM1 0x00000000 0x00020000 { ; load region size_region
+ ER_IROM1 0x00000000 0x00020000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+ RW_IRAM1 0x20000000 0x00004000 { ; RW data
+ .ANY (+RW +ZI)
+ }
+}
+
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_STD/W7500x_adc.o has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_STD/W7500x_crg.o has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_STD/W7500x_exti.o has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_STD/W7500x_gpio.o has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_STD/W7500x_i2c.o has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_STD/W7500x_pwm.o has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_STD/W7500x_uart.o has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_STD/startup_W7500x.o has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_WIZwiki_W7500/TOOLCHAIN_ARM_STD/system_W7500x.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZwiki_W7500/W7500x.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,1148 @@
+/**************************************************************************//**
+ * @file W7500x.h
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File for
+ * Device W7500x
+ * @version V3.01
+ * @date 06. March 2012
+ *
+ * @note
+ * Copyright (C) 2010-2012 ARM Limited. All rights reserved.
+ *
+ * @par
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+
+
+#ifndef W7500x_H
+#define W7500x_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup W7500x_Definitions W7500x Definitions
+ This file defines all structures and symbols for W7500x:
+ - registers and bitfields
+ - peripheral base address
+ - peripheral ID
+ - Peripheral definitions
+ @{
+*/
+
+
+/******************************************************************************/
+/* Processor and Core Peripherals */
+/******************************************************************************/
+/** @addtogroup W7500x_CMSIS Device CMSIS Definitions
+ Configuration of the Cortex-M0 Processor and Core Peripherals
+ @{
+*/
+
+/*
+ * ==========================================================================
+ * ---------- Interrupt Number Definition -----------------------------------
+ * ==========================================================================
+ */
+
+typedef enum IRQn
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************/
+
+/* ToDo: use this Cortex interrupt numbers if your device is a CORTEX-M0 device */
+ NonMaskableInt_IRQn = -14, /*!< 2 Cortex-M0 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+/****** W7500x Specific Interrupt Numbers *********************************************************/
+ SSP0_IRQn = 0, /*!< SSP 0 Interrupt */
+ SSP1_IRQn = 1, /*!< SSP 1 Interrupt */
+ UART0_IRQn = 2, /*!< UART 0 Interrupt */
+ UART1_IRQn = 3, /*!< UART 1 Interrupt */
+ UART2_IRQn = 4, /*!< UART 2 Interrupt */
+ I2C0_IRQn = 5, /*!< I2C 0 Interrupt */
+ I2C1_IRQn = 6, /*!< I2C 1 Interrupt */
+ PORT0_IRQn = 7, /*!< Port 1 combined Interrupt */
+ PORT1_IRQn = 8, /*!< Port 2 combined Interrupt */
+ PORT2_IRQn = 9, /*!< Port 2 combined Interrupt */
+ PORT3_IRQn = 10, /*!< Port 2 combined Interrupt */
+ DMA_IRQn = 11, /*!< DMA combined Interrupt */
+ DUALTIMER0_IRQn = 12, /*!< Dual Timer 0 Interrupt */
+ DUALTIMER1_IRQn = 13, /*!< Dual Timer 1 Interrupt */
+ PWM0_IRQn = 14, /*!< PWM 0 Interrupt */
+ PWM1_IRQn = 15, /*!< PWM 1 Interrupt */
+ PWM2_IRQn = 16, /*!< PWM 2 Interrupt */
+ PWM3_IRQn = 17, /*!< PWM 3 Interrupt */
+ PWM4_IRQn = 18, /*!< PWM 4 Interrupt */
+ PWM5_IRQn = 19, /*!< PWM 5 Interrupt */
+ PWM6_IRQn = 20, /*!< PWM 6 Interrupt */
+ PWM7_IRQn = 21, /*!< PWM 7 Interrupt */
+ RTC_IRQn = 22, /*!< RTC Interrupt */
+ ADC_IRQn = 23, /*!< ADC Interrupt */
+ WZTOE_IRQn = 24, /*!< WZTOE Interrupt */
+ EXTI_IRQn = 25 /*!< EXTI Interrupt */
+} IRQn_Type;
+
+/*
+ * ==========================================================================
+ * ----------- Processor and Core Peripheral Section ------------------------
+ * ==========================================================================
+ */
+
+/* Configuration of the Cortex-M0 Processor and Core Peripherals */
+#define __CM0_REV 0x0000 /*!< Core Revision r0p0 */
+#define __NVIC_PRIO_BITS 2 /*!< Number of Bits used for Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+#define __MPU_PRESENT 0 /*!< MPU present or not */
+
+/*@}*/ /* end of group W7500x_CMSIS */
+
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_W7500x.h" /* W7500x System include file */
+
+
+/** @addtogroup Exported_types
+ * @{
+ */
+
+typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus;
+typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus;
+
+
+
+
+
+/**
+ * @}
+ */
+
+
+
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Clock Reset Generator
+ */
+typedef struct
+{
+ __IO uint32_t OSC_PDR; /*!< Oscillator power down register, Address offset : 0x00 */
+ uint32_t RESERVED0[3];
+ __IO uint32_t PLL_PDR; /*!< PLL power down register, Address offset : 0x10 */
+ __IO uint32_t PLL_FCR; /*!< PLL frequency calculating register, Address offset : 0x14 */
+ __IO uint32_t PLL_OER; /*!< PLL output enable register, Address offset : 0x18 */
+ __IO uint32_t PLL_BPR; /*!< PLL bypass register, Address offset : 0x1c */
+ __IO uint32_t PLL_IFSR; /*!< PLL input frequency select register, Address offset : 0x20 */
+ uint32_t RESERVED1[3];
+ __IO uint32_t FCLK_SSR; /*!< FCLK source select register, Address offset : 0x30 */
+ __IO uint32_t FCLK_PVSR; /*!< FCLK prescale value select register, Address offset : 0x34 */
+ uint32_t RESERVED2[2];
+ __IO uint32_t SSPCLK_SSR; /*!< SSPCLK source select register, Address offset : 0x40 */
+ __IO uint32_t SSPCLK_PVSR; /*!< SSPCLK prescale value select register, Address offset : 0x44 */
+ uint32_t RESERVED3[6];
+ __IO uint32_t ADCCLK_SSR; /*!< ADCCLK source select register, Address offset : 0x60 */
+ __IO uint32_t ADCCLK_PVSR; /*!< ADCCLK prescale value select register, Address offset : 0x64 */
+ uint32_t RESERVED4[2];
+ __IO uint32_t TIMER0CLK_SSR; /*!< TIMER0CLK source select register, Address offset : 0x70 */
+ __IO uint32_t TIMER0CLK_PVSR; /*!< TIMER0CLK prescale value select register, Address offset : 0x74 */
+ uint32_t RESERVED5[2];
+ __IO uint32_t TIMER1CLK_SSR; /*!< TIMER1CLK source select register, Address offset : 0x80 */
+ __IO uint32_t TIMER1CLK_PVSR; /*!< TIMER1CLK prescale value select register, Address offset : 0x84 */
+ uint32_t RESERVED6[10];
+ __IO uint32_t PWM0CLK_SSR; /*!< PWM0CLK source select register, Address offset : 0xb0 */
+ __IO uint32_t PWM0CLK_PVSR; /*!< PWM0CLK prescale value select register, Address offset : 0xb4 */
+ uint32_t RESERVED7[2];
+ __IO uint32_t PWM1CLK_SSR; /*!< PWM1CLK source select register, Address offset : 0xc0 */
+ __IO uint32_t PWM1CLK_PVSR; /*!< PWM1CLK prescale value select register, Address offset : 0xc4 */
+ uint32_t RESERVED8[2];
+ __IO uint32_t PWM2CLK_SSR; /*!< PWM2CLK source select register, Address offset : 0xd0 */
+ __IO uint32_t PWM2CLK_PVSR; /*!< PWM2CLK prescale value select register, Address offset : 0xd4 */
+ uint32_t RESERVED9[2];
+ __IO uint32_t PWM3CLK_SSR; /*!< PWM3CLK source select register, Address offset : 0xe0 */
+ __IO uint32_t PWM3CLK_PVSR; /*!< PWM3CLK prescale value select register, Address offset : 0xe4 */
+ uint32_t RESERVED10[2];
+ __IO uint32_t PWM4CLK_SSR; /*!< PWM4CLK source select register, Address offset : 0xf0 */
+ __IO uint32_t PWM4CLK_PVSR; /*!< PWM4CLK prescale value select register, Address offset : 0xf4 */
+ uint32_t RESERVED11[2];
+ __IO uint32_t PWM5CLK_SSR; /*!< PWM5CLK source select register, Address offset : 0x100 */
+ __IO uint32_t PWM5LK_PVSR; /*!< PWM5CLK prescale value select register, Address offset : 0x104 */
+ uint32_t RESERVED12[2];
+ __IO uint32_t PWM6CLK_SSR; /*!< PWM6CLK source select register, Address offset : 0x110 */
+ __IO uint32_t PWM6CLK_PVSR; /*!< PWM6CLK prescale value select register, Address offset : 0x114 */
+ uint32_t RESERVED13[2];
+ __IO uint32_t PWM7CLK_SSR; /*!< PWM7CLK source select register, Address offset : 0x120 */
+ __IO uint32_t PWM7CLK_PVSR; /*!< PWM7CLK prescale value select register, Address offset : 0x124 */
+ uint32_t RESERVED14[2];
+ __IO uint32_t RTC_HS_SSR; /*!< RTC High Speed source select register, Address offset : 0x130 */
+ __IO uint32_t RTC_HS_PVSR; /*!< RTC High Speed prescale value select register, Address offset : 0x134 */
+ uint32_t RESERVED15;
+ __IO uint32_t RTC_SSR; /*!< RTC source select register, Address offset : 0x13c */
+
+ __IO uint32_t WDOGCLK_HS_SSR; /*!< WDOGCLK High Speed source select register, Address offset : 0x140 */
+ __IO uint32_t WDOGCLK_HS_PVSR; /*!< WDOGCLK High Speed prescale value select register, Address offset : 0x144 */
+ uint32_t RESERVED16;
+ __IO uint32_t WDOGCLK_SSR; /*!< WDOGCLK source select register, Address offset : 0x14c */
+
+ __IO uint32_t UARTCLK_SSR; /*!< UARTCLK source select register, Address offset : 0x150 */
+ __IO uint32_t UARTCLK_PVSR; /*!< UARTCLK prescale value select register, Address offset : 0x154 */
+ uint32_t RESERVED17[2];
+ __IO uint32_t MIICLK_ECR; /*!< MII clock enable control register, Address offset : 0x160 */
+ uint32_t RESERVED18[3];
+ __IO uint32_t MONCLK_SSR; /*!< Monitoring clock source select I found Treasure was IoT Base Station in March.register, Address offset : 0x170 */
+}CRG_TypeDef;
+
+
+/**
+ * @brief UART
+ */
+typedef struct
+{
+ __IO uint32_t DR; /*!< Data, Address offset : 0x00 */
+ union {
+ __I uint32_t RSR; /*!< Receive Status, Address offset : 0x04 */
+ __O uint32_t ECR; /*!< Error Clear, Address offset : 0x04 */
+ } STATUS;
+ uint32_t RESERVED0[4];
+ __IO uint32_t FR; /*!< Flags, Address offset : 0x18 */
+ uint32_t RESERVED1;
+ __IO uint32_t ILPR; /*!< IrDA Low-power Counter, Address offset : 0x20 */
+ __IO uint32_t IBRD; /*!< Integer Baud Rate, Address offset : 0x24 */
+ __IO uint32_t FBRD; /*!< Fractional Baud Rate, Address offset : 0x28 */
+ __IO uint32_t LCR_H; /*!< Line Control, Address offset : 0x2C */
+ __IO uint32_t CR; /*!< Control, Address offset : 0x30 */
+ __IO uint32_t IFLS; /*!< Interrupt FIFO Level Select, Address offset : 0x34 */
+ __IO uint32_t IMSC; /*!< Interrupt Mask Set / Clear, Address offset : 0x38 */
+ __IO uint32_t RIS; /*!< Raw Interrupt Status , Address offset : 0x3C */
+ __IO uint32_t MIS; /*!< Masked Interrupt Status , Address offset : 0x40 */
+ __O uint32_t ICR; /*!< Interrupt Clear, Address offset : 0x44 */
+ __IO uint32_t DMACR; /*!< DMA Control, Address offset : 0x48 */
+} UART_TypeDef;
+
+
+/**
+ * @brief Simple UART
+ */
+typedef struct
+{
+ __IO uint32_t DATA; /*!< Offset: 0x000 Data Register (R/W) */
+ __IO uint32_t STATE; /*!< Offset: 0x004 Status Register (R/W) */
+ __IO uint32_t CTRL; /*!< Offset: 0x008 Control Register (R/W) */
+ union {
+ __I uint32_t STATUS; /*!< Offset: 0x00C Interrupt Status Register (R/ ) */
+ __O uint32_t CLEAR; /*!< Offset: 0x00C Interrupt Clear Register ( /W) */
+ }INT;
+ __IO uint32_t BAUDDIV; /*!< Offset: 0x010 Baudrate Divider Register (R/W) */
+
+} S_UART_TypeDef;
+
+/**
+ * @brief Analog Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ADC_CTR; /* ADC control register, Address offset : 0x000 */
+ __IO uint32_t ADC_CHSEL; /* ADC channel select register, Address offset : 0x004 */
+ __IO uint32_t ADC_START; /* ADC start register, Address offset : 0x008 */
+ __I uint32_t ADC_DATA; /* ADC conversion data register, Address offset : 0x00c */
+ __IO uint32_t ADC_INT; /* ADC interrupt register, Address offset : 0x010 */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ADC_INTCLR; /* ADC interrupt clear register, Address offset : 0x01c */
+}ADC_TypeDef;
+
+/**
+ * @brief dualtimer
+ */
+typedef struct
+{
+ __IO uint32_t TimerLoad; // <h> Timer Load </h>
+ __I uint32_t TimerValue; // <h> Timer Counter Current Value <r></h>
+ __IO uint32_t TimerControl; // <h> Timer Control
+ // <o.7> TimerEn: Timer Enable
+ // <o.6> TimerMode: Timer Mode
+ // <0=> Freerunning-mode
+ // <1=> Periodic mode
+ // <o.5> IntEnable: Interrupt Enable
+ // <o.2..3> TimerPre: Timer Prescale
+ // <0=> / 1
+ // <1=> / 16
+ // <2=> / 256
+ // <3=> Undefined!
+ // <o.1> TimerSize: Timer Size
+ // <0=> 16-bit counter
+ // <1=> 32-bit counter
+ // <o.0> OneShot: One-shoot mode
+ // <0=> Wrapping mode
+ // <1=> One-shot mode
+ // </h>
+ __O uint32_t TimerIntClr; // <h> Timer Interrupt Clear <w></h>
+ __I uint32_t TimerRIS; // <h> Timer Raw Interrupt Status <r></h>
+ __I uint32_t TimerMIS; // <h> Timer Masked Interrupt Status <r></h>
+ __IO uint32_t TimerBGLoad; // <h> Background Load Register </h>
+} DUALTIMER_TypeDef;
+
+/**
+ * @brief GPIO
+ */
+typedef struct
+{
+ __IO uint32_t DATA; /* DATA Register (R/W), offset : 0x000 */
+ __IO uint32_t DATAOUT; /* Data Output Latch Register (R/W), offset : 0x004 */
+ uint32_t RESERVED0[2];
+ __IO uint32_t OUTENSET; /* Output Enable Set Register (R/W) offset : 0x010 */
+ __IO uint32_t OUTENCLR; /* Output Enable Clear Register (R/W) offset : 0x014 */
+ __IO uint32_t RESERVED1; /* Alternate Function Set Register (R/W) offset : 0x018 */
+ __IO uint32_t RESERVED2; /* Alternate Function Clear Register (R/W) offset : 0x01C */
+ __IO uint32_t INTENSET; /* Interrupt Enable Set Register (R/W) offset : 0x020 */
+ __IO uint32_t INTENCLR; /* Interrupt Enable Clear Register (R/W) offset : 0x024 */
+ __IO uint32_t INTTYPESET; /* Interrupt Type Set Register (R/W) offset : 0x028 */
+ __IO uint32_t INTTYPECLR; /* Interrupt Type Clear Register (R/W) offset : 0x02C */
+ __IO uint32_t INTPOLSET; /* Interrupt Polarity Set Register (R/W) offset : 0x030 */
+ __IO uint32_t INTPOLCLR; /* Interrupt Polarity Clear Register (R/W) offset : 0x034 */
+ union {
+ __I uint32_t INTSTATUS; /* Interrupt Status Register (R/ ) offset : 0x038 */
+ __O uint32_t INTCLEAR; /* Interrupt Clear Register ( /W) offset : 0x038 */
+ }Interrupt;
+ uint32_t RESERVED3[241];
+ __IO uint32_t LB_MASKED[256]; /* Lower byte Masked Access Register (R/W) offset : 0x400 - 0x7FC */
+ __IO uint32_t UB_MASKED[256]; /* Upper byte Masked Access Register (R/W) offset : 0x800 - 0xBFC */
+} GPIO_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t Port[16]; /* Port_00, offset : 0x00 */
+ /* Port_01, offset : 0x04 */
+ /* Port_02, offset : 0x08 */
+ /* Port_03, offset : 0x0C */
+ /* Port_04, offset : 0x10 */
+ /* Port_05, offset : 0x14 */
+ /* Port_06, offset : 0x18 */
+ /* Port_07, offset : 0x1C */
+ /* Port_08, offset : 0x20 */
+ /* Port_09, offset : 0x24 */
+ /* Port_10, offset : 0x28 */
+ /* Port_11, offset : 0x2C */
+ /* Port_12, offset : 0x30 */
+ /* Port_13, offset : 0x34 */
+ /* Port_14, offset : 0x38 */
+ /* Port_15, offset : 0x3C */
+} P_Port_Def;
+
+typedef struct
+{
+ __IO uint32_t Port[5]; /* Port_00, offset : 0x00 */
+ /* Port_01, offset : 0x04 */
+ /* Port_02, offset : 0x08 */
+ /* Port_03, offset : 0x0C */
+ /* Port_04, offset : 0x10 */
+} P_Port_D_Def;
+
+/**
+ * @brief I2C Register structure definition
+ */
+typedef struct
+{
+ __IO uint32_t PRER; //0x00
+ __IO uint32_t CTR; //0x04
+ __IO uint32_t CMDR; //0x08
+ __I uint32_t SR; //0x0C
+ __IO uint32_t TSR; //0x10
+ __IO uint32_t SADDR; //0x14
+ __IO uint32_t TXR; //0x18
+ __I uint32_t RXR; //0x1C
+ __I uint32_t ISR; //0x20
+ __IO uint32_t ISCR; //0x24
+ __IO uint32_t ISMR; //0x28
+}I2C_TypeDef;
+
+/**
+ * @brief PWM Register structure definition
+ */
+typedef struct
+{
+ __IO uint32_t IER; //Interrupt enable register
+ // <7> IE7 : Channel 7 interrupt enable <R/W>
+ // <6> IE6 : Channel 6 interrupt enable <R/W>
+ // <5> IE5 : Channel 5 interrupt enable <R/W>
+ // <4> IE4 : Channel 4 interrupt enable <R/W>
+ // <3> IE3 : Channel 3 interrupt enable <R/W>
+ // <2> IE2 : Channel 2 interrupt enable <R/W>
+ // <1> IE1 : Channel 1 interrupt enable <R/W>
+ // <0> IE0 : Channel 0 interrupt enable <R/W>
+
+ __IO uint32_t SSR; //Start Stop register
+ // <7> SS7 : Channel 7 TC start or stop <R/W>
+ // <6> SS6 : Channel 6 TC start or stop <R/W>
+ // <5> SS5 : Channel 5 TC start or stop <R/W>
+ // <4> SS4 : Channel 4 TC start or stop <R/W>
+ // <3> SS3 : Channel 3 TC start or stop <R/W>
+ // <2> SS2 : Channel 2 TC start or stop <R/W>
+ // <1> SS1 : Channel 1 TC start or stop <R/W>
+ // <0> SS0 : Channel 0 TC start or stop <R/W>
+
+ __IO uint32_t PSR; //Pause register
+ // <7> PS7 : Channel 7 TC pasue <R/W>
+ // <6> PS6 : Channel 6 TC pasue <R/W>
+ // <5> PS5 : Channel 5 TC pasue <R/W>
+ // <4> PS4 : Channel 4 TC pasue <R/W>
+ // <3> PS3 : Channel 3 TC pasue <R/W>
+ // <2> PS2 : Channel 2 TC pasue <R/W>
+ // <1> PS1 : Channel 1 TC pasue <R/W>
+ // <0> PS0 : Channel 0 TC pasue <R/W>
+} PWM_TypeDef;
+
+typedef struct
+{
+ __I uint32_t IR; //Interrupt register
+ // <2> CI : Capture interrupt <R>
+ // <1> OI : Overflow interrupt <R>
+ // <0> MI : Match interrupt <R>
+
+ __IO uint32_t IER; //Interrupt enable register
+ // <2> CIE : Capture interrupt enable <R/W>
+ // <1> OIE : Overflow interrupt enable <R/W>
+ // <0> MIE : Match interrupt enable <R/W>
+
+ __O uint32_t ICR; //Interrupt clear register
+ // <2> CIC : Capture interrupt clear <W>
+ // <1> OIC : Overflow interrupt clear <W>
+ // <0> MIC : Match interrupt clear <W>
+
+ __I uint32_t TCR; //Timer/Counter register
+ // <0..31> TCR : Timer/Counter register <R>
+
+ __I uint32_t PCR; //Prescale counter register
+ // <0..5> PCR : Prescale Counter register <R>
+
+ __IO uint32_t PR; //Prescale register
+ // <0..5> PR : prescale register <R/W>
+
+ __IO uint32_t MR; //Match register
+ // <0..31> MR : Match register <R/W>
+
+ __IO uint32_t LR; //Limit register
+ // <0..31> LR : Limit register <R/W>
+ __IO uint32_t UDMR; //Up-Down mode register
+ // <0> UDM : Up-down mode <R/W>
+
+ __IO uint32_t TCMR; //Timer/Counter mode register
+ // <0> TCM : Timer/Counter mode <R/W>
+
+ __IO uint32_t PEEER; //PWM output enable and external input enable register
+ // <0..1> PEEE : PWM output enable and external input enable <R/W>
+
+ __IO uint32_t CMR; //Capture mode register
+ // <0> CM : Capture mode <R/W>
+
+ __IO uint32_t CR; //Capture register
+ // <0..31> CR : Capture register <R>
+
+ __IO uint32_t PDMR; //Periodic mode register
+ // <0> PDM : Periodic mode <R/W>
+
+ __IO uint32_t DZER; //Dead-zone enable register
+ // <0> DZE : Dead-zone enable <R/W>
+
+ __IO uint32_t DZCR; //Dead-zone counter register
+ // <0..9> DZC : Dead-zone counter <R/W>
+} PWM_CHn_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t PWM_CHn_PR; //Prescale register
+ // <0..5> PR : prescale register <R/W>
+ __IO uint32_t PWM_CHn_MR; //Match register
+ // <0..31> MR : Match register <R/W>
+ __IO uint32_t PWM_CHn_LR; //Limit register
+ // <0..31> LR : Limit register <R/W>
+ __IO uint32_t PWM_CHn_UDMR; //Up-Down mode register
+ // <0> UDM : Up-down mode <R/W>
+ __IO uint32_t PWM_CHn_PDMR; //Periodic mode register
+ // <0> PDM : Periodic mode <R/W>
+}PWM_TimerModeInitTypeDef;
+
+typedef struct
+{
+ __IO uint32_t PWM_CHn_PR; //Prescale register
+ // <0..5> PR : prescale register <R/W>
+ __IO uint32_t PWM_CHn_MR; //Match register
+ // <0..31> MR : Match register <R/W>
+ __IO uint32_t PWM_CHn_LR; //Limit register
+ // <0..31> LR : Limit register <R/W>
+ __IO uint32_t PWM_CHn_UDMR; //Up-Down mode register
+ // <0> UDM : Up-down mode <R/W>
+ __IO uint32_t PWM_CHn_PDMR; //Periodic mode register
+ // <0> PDM : Peiodic mode <R/W>
+ __IO uint32_t PWM_CHn_CMR; //Capture mode register
+ // <0> CM : Capture mode <R/W>
+}PWM_CaptureModeInitTypeDef;
+
+typedef struct
+{
+ __IO uint32_t PWM_CHn_MR;
+ __IO uint32_t PWM_CHn_LR;
+ __IO uint32_t PWM_CHn_UDMR;
+ __IO uint32_t PWM_CHn_PDMR;
+ __IO uint32_t PWM_CHn_TCMR;
+}PWM_CounterModeInitTypeDef;
+
+
+/**
+ * @brief Random Number generator
+ */
+typedef struct
+{
+ __IO uint32_t RNG_RUN; /* RNG run register, Address offset : 0x000 */
+ __IO uint32_t RNG_SEED; /* RNG seed value register, Address offset : 0x004 */
+ __IO uint32_t RNG_CLKSEL; /* RNG Clock source select register, Address offset : 0x008 */
+ __IO uint32_t RNG_MODE; /* RNG MODE select register, Address offset : 0x00c */
+ __I uint32_t RNG_RN; /* RNG random number value register, Address offset : 0x010 */
+ __IO uint32_t RNG_POLY; /* RNG polynomial register, Address offset : 0x014 */
+}RNG_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+typedef struct
+{
+ __IO uint32_t CR0;
+ __IO uint32_t CR1;
+ __IO uint32_t DR;
+ __IO uint32_t SR;
+ __IO uint32_t CPSR;
+ __IO uint32_t IMSC;
+ __IO uint32_t RIS;
+ __IO uint32_t MIS;
+ __IO uint32_t ICR;
+ __IO uint32_t DMACR;
+} SSP_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t WatchdogLoad; // <h> Watchdog Load Register </h>
+ __I uint32_t WatchdogValue; // <h> Watchdog Value Register </h>
+ __IO uint32_t WatchdogControl; // <h> Watchdog Control Register
+ // <o.1> RESEN: Reset enable
+ // <o.0> INTEN: Interrupt enable
+ // </h>
+ __O uint32_t WatchdogIntClr; // <h> Watchdog Clear Interrupt Register </h>
+ __I uint32_t WatchdogRIS; // <h> Watchdog Raw Interrupt Status Register </h>
+ __I uint32_t WatchdogMIS; // <h> Watchdog Interrupt Status Register </h>
+ uint32_t RESERVED[762];
+ __IO uint32_t WatchdogLock; // <h> Watchdog Lock Register </h>
+}WATCHDOG_TypeDef;
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+
+/* Peripheral and SRAM base address */
+#define W7500x_FLASH_BASE (0x00000000UL) /*!< (FLASH ) Base Address */
+#define W7500x_SRAM_BASE (0x20000000UL) /*!< (SRAM ) Base Address */
+#define W7500x_PERIPH_BASE (0x40000000UL) /*!< (Peripheral) Base Address */
+
+#define W7500x_RAM_BASE (0x20000000UL)
+#define W7500x_APB1_BASE (0x40000000UL)
+#define W7500x_APB2_BASE (0x41000000UL)
+#define W7500x_AHB_BASE (0x42000000UL)
+
+#define W7500x_UART0_BASE (W7500x_APB1_BASE + 0x0000C000UL)
+#define W7500x_UART1_BASE (W7500x_APB1_BASE + 0x0000D000UL)
+#define W7500x_UART2_BASE (W7500x_APB1_BASE + 0x00006000UL)
+
+#define W7500x_CRG_BASE (W7500x_APB2_BASE + 0x00001000UL)
+#define W7500x_ADC_BASE (W7500x_APB2_BASE + 0x00000000UL)
+
+#define W7500x_INFO_BGT (0x0003FDB8)
+#define W7500x_INFO_OSC (0x0003FDBC)
+
+#define W7500x_TRIM_BGT (0x41001210)
+#define W7500x_TRIM_OSC (0x41001004)
+
+#define W7500x_DUALTIMER0_BASE (W7500x_APB1_BASE + 0x00001000ul)
+#define W7500x_DUALTIMER1_BASE (W7500x_APB1_BASE + 0x00002000ul)
+
+#define EXTI_Px_BASE (W7500x_APB2_BASE + 0x00002200UL)
+
+#define GPIOA_BASE (W7500x_AHB_BASE + 0x00000000UL) // W7500x_AHB_BASE : 0x42000000UL
+#define GPIOB_BASE (W7500x_AHB_BASE + 0x01000000UL)
+#define GPIOC_BASE (W7500x_AHB_BASE + 0x02000000UL)
+#define GPIOD_BASE (W7500x_AHB_BASE + 0x03000000UL)
+
+#define P_AFSR_BASE (W7500x_APB2_BASE + 0x00002000UL)
+
+#define P_PCR_BASE (W7500x_APB2_BASE + 0x00003000UL)
+
+#define I2C0_BASE (W7500x_APB1_BASE + 0x8000)
+#define I2C1_BASE (W7500x_APB1_BASE + 0x9000)
+
+#define W7500x_PWM_BASE (W7500x_APB1_BASE + 0x00005000UL)
+
+#define W7500x_RNG_BASE (W7500x_APB1_BASE + 0x00007000UL)
+
+#define SSP0_BASE (0x4000A000)
+#define SSP1_BASE (0x4000B000)
+
+#define W7500x_WATCHDOG_BASE (W7500x_APB1_BASE + 0x0000UL)
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+#define CRG ((CRG_TypeDef *) W7500x_CRG_BASE)
+
+#define UART0 ((UART_TypeDef *) W7500x_UART0_BASE)
+#define UART1 ((UART_TypeDef *) W7500x_UART1_BASE)
+#define UART2 ((S_UART_TypeDef *) W7500x_UART2_BASE)
+
+#define ADC ((ADC_TypeDef *) W7500x_ADC_BASE)
+
+#define DUALTIMER0_0 ((DUALTIMER_TypeDef *) (W7500x_DUALTIMER0_BASE) )
+#define DUALTIMER0_1 ((DUALTIMER_TypeDef *) (W7500x_DUALTIMER0_BASE + 0x20ul))
+#define DUALTIMER1_0 ((DUALTIMER_TypeDef *) (W7500x_DUALTIMER1_BASE) )
+#define DUALTIMER1_1 ((DUALTIMER_TypeDef *) (W7500x_DUALTIMER1_BASE + 0x20ul))
+
+#define EXTI_PA ((P_Port_Def *) (EXTI_Px_BASE + 0x00000000UL)) /* PA_XX External interrupt Enable Register */
+#define EXTI_PB ((P_Port_Def *) (EXTI_Px_BASE + 0x00000040UL)) /* PB_XX External interrupt Enable Register */
+#define EXTI_PC ((P_Port_Def *) (EXTI_Px_BASE + 0x00000080UL)) /* PC_XX External interrupt Enable Register */
+#define EXTI_PD ((P_Port_D_Def *) (EXTI_Px_BASE + 0x000000C0UL)) /* PD_XX External interrupt Enable Register */
+
+#define GPIOA ((GPIO_TypeDef *) (GPIOA_BASE) )
+#define GPIOB ((GPIO_TypeDef *) (GPIOB_BASE) )
+#define GPIOC ((GPIO_TypeDef *) (GPIOC_BASE) )
+#define GPIOD ((GPIO_TypeDef *) (GPIOD_BASE) )
+
+#define PA_AFSR ((P_Port_Def *) (P_AFSR_BASE + 0x00000000UL)) /* PA_XX Pad Alternate Function Select Register */
+#define PB_AFSR ((P_Port_Def *) (P_AFSR_BASE + 0x00000040UL)) /* PB_XX Pad Alternate Function Select Register */
+#define PC_AFSR ((P_Port_Def *) (P_AFSR_BASE + 0x00000080UL)) /* PC_XX Pad Alternate Function Select Register */
+#define PD_AFSR ((P_Port_D_Def *) (P_AFSR_BASE + 0x000000C0UL)) /* PD_XX Pad Alternate Function Select Register */
+
+#define PA_PCR ((P_Port_Def *) (P_PCR_BASE + 0x00000000UL)) /* PA_XX Pad Control Register */
+#define PB_PCR ((P_Port_Def *) (P_PCR_BASE + 0x00000040UL)) /* PB_XX Pad Control Register */
+#define PC_PCR ((P_Port_Def *) (P_PCR_BASE + 0x00000080UL)) /* PC_XX Pad Control Register */
+#define PD_PCR ((P_Port_D_Def *) (P_PCR_BASE + 0x000000C0UL)) /* PD_XX Pad Control Register */
+
+#define I2C0 ((I2C_TypeDef *) I2C0_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+
+
+#define TIMCLKEN0_0 *(uint32_t *)(W7500x_DUALTIMER0_BASE + 0x80ul)
+#define TIMCLKEN0_1 *(uint32_t *)(W7500x_DUALTIMER0_BASE + 0xA0ul)
+#define TIMCLKEN1_0 *(uint32_t *)(W7500x_DUALTIMER1_BASE + 0x80ul)
+#define TIMCLKEN1_1 *(uint32_t *)(W7500x_DUALTIMER1_BASE + 0xA0ul)
+
+#define PWM ((PWM_TypeDef *) (W7500x_PWM_BASE + 0x800UL ))
+#define PWM_CH0 ((PWM_CHn_TypeDef *) (W7500x_PWM_BASE))
+#define PWM_CH1 ((PWM_CHn_TypeDef *) (W7500x_PWM_BASE + 0x100UL))
+#define PWM_CH2 ((PWM_CHn_TypeDef *) (W7500x_PWM_BASE + 0x200UL))
+#define PWM_CH3 ((PWM_CHn_TypeDef *) (W7500x_PWM_BASE + 0x300UL))
+#define PWM_CH4 ((PWM_CHn_TypeDef *) (W7500x_PWM_BASE + 0x400UL))
+#define PWM_CH5 ((PWM_CHn_TypeDef *) (W7500x_PWM_BASE + 0x500UL))
+#define PWM_CH6 ((PWM_CHn_TypeDef *) (W7500x_PWM_BASE + 0x600UL))
+#define PWM_CH7 ((PWM_CHn_TypeDef *) (W7500x_PWM_BASE + 0x700UL))
+
+#define RNG ((RNG_TypeDef *) W7500x_RNG_BASE)
+
+#define SSP0 ((SSP_TypeDef*) (SSP0_BASE))
+#define SSP1 ((SSP_TypeDef*) (SSP1_BASE))
+
+#define WATCHDOG ((WATCHDOG_TypeDef *) W7500x_WATCHDOG_BASE)
+
+/**
+ * @}
+ */
+
+
+
+/******************************************************************************/
+/* */
+/* Clock Reset Generator */
+/* */
+/******************************************************************************/
+/**************** Bit definition for CRG_OSC_PDR **************************/
+#define CRG_OSC_PDR_NRMLOP (0x0ul) // Normal Operation
+#define CRG_OSC_PDR_PD (0x1ul) // Power Down
+/**************** Bit definition for CRG_PLL_PDR **************************/
+#define CRG_PLL_PDR_PD (0x0ul) // Power Down
+#define CRG_PLL_PDR_NRMLOP (0x1ul) // Normal Operation
+/**************** Bit definition for CRG_PLL_FCR **************************/
+//ToDo
+/**************** Bit definition for CRG_PLL_OER **************************/
+#define CRG_PLL_OER_DIS (0x0ul) // Clock out is disable
+#define CRG_PLL_OER_EN (0x1ul) // Clock out is enable
+/**************** Bit definition for CRG_PLL_BPR **************************/
+#define CRG_PLL_BPR_DIS (0x0ul) // Bypass disable. Normal operation
+#define CRG_PLL_BPR_EN (0x1ul) // Bypass enable. Clock will be set to external clock
+/**************** Bit definition for CRG_PLL_IFSR **************************/
+#define CRG_PLL_IFSR_RCLK (0x0ul) // Internal 8MHz RC oscillator clock(RCLK)
+#define CRG_PLL_IFSR_OCLK (0x1ul) // External oscillator clock (OCLK, 8MHz ~ 24MHz)
+/**************** Bit definition for CRG_FCLK_SSR **************************/
+#define CRG_FCLK_SSR_MCLK (0x01ul) // 00,01 Output clock of PLL(MCLK)
+#define CRG_FCLK_SSR_RCLK (0x02ul) // Internal 8MHz RC oscillator clock(RCLK)
+#define CRG_FCLK_SSR_OCLK (0x03ul) // External oscillator clock(OCLK, 8MHz ~ 24MHz)
+/**************** Bit definition for CRG_FCLK_PVSR **************************/
+#define CRG_FCLK_PVSR_DIV1 (0x00ul) // 1/1 (bypass)
+#define CRG_FCLK_PVSR_DIV2 (0x01ul) // 1/2
+#define CRG_FCLK_PVSR_DIV4 (0x02ul) // 1/4
+#define CRG_FCLK_PVSR_DIV8 (0x03ul) // 1/8
+/**************** Bit definition for CRG_SSPCLK_SSR **************************/
+#define CRG_SSPCLK_SSR_DIS (0x00ul) // Disable clock
+#define CRG_SSPCLK_SSR_MCLK (0x01ul) // PLL output clock(MCLK)
+#define CRG_SSPCLK_SSR_RCLK (0x02ul) // Internal 8MHz RC oscillator clock(RCLK)
+#define CRG_SSPCLK_SSR_OCLK (0x03ul) // External oscillator clock(OCLK, 8MHz ~ 24MHz)
+/**************** Bit definition for CRG_SSPCLK_PVSR **************************/
+#define CRG_SSPCLK_PVSR_DIV1 (0x00ul) // 1/1 (bypass)
+#define CRG_SSPCLK_PVSR_DIV2 (0x01ul) // 1/2
+#define CRG_SSPCLK_PVSR_DIV4 (0x02ul) // 1/4
+#define CRG_SSPCLK_PVSR_DIV8 (0x03ul) // 1/8
+/**************** Bit definition for CRG_ADCCLK_SSR **************************/
+#define CRG_ADCCLK_SSR_DIS (0x00ul) // Disable clock
+#define CRG_ADCCLK_SSR_MCLK (0x01ul) // PLL output clock(MCLK)
+#define CRG_ADCCLK_SSR_RCLK (0x02ul) // Internal 8MHz RC oscillator clock(RCLK)
+#define CRG_ADCCLK_SSR_OCLK (0x03ul) // External oscillator clock(OCLK, 8MHz ~ 24MHz)
+/**************** Bit definition for CRG_ADCCLK_PVSR **************************/
+#define CRG_ADCCLK_PVSR_DIV1 (0x00ul) // 1/1 (bypass)
+#define CRG_ADCCLK_PVSR_DIV2 (0x01ul) // 1/2
+#define CRG_ADCCLK_PVSR_DIV4 (0x02ul) // 1/4
+#define CRG_ADCCLK_PVSR_DIV8 (0x03ul) // 1/8
+/**************** Bit definition for CRG_TIMER0/1CLK_SSR **************************/
+#define CRG_TIMERCLK_SSR_DIS (0x00ul) // Disable clock
+#define CRG_TIMERCLK_SSR_MCLK (0x01ul) // PLL output clock(MCLK)
+#define CRG_TIMERCLK_SSR_RCLK (0x02ul) // Internal 8MHz RC oscillator clock(RCLK)
+#define CRG_TIMERCLK_SSR_OCLK (0x03ul) // External oscillator clock(OCLK, 8MHz ~ 24MHz)
+/**************** Bit definition for CRG_TIMER0/1CLK_PVSR **************************/
+#define CRG_TIMERCLK_PVSR_DIV1 (0x00ul) // 1/1 (bypass)
+#define CRG_TIMERCLK_PVSR_DIV2 (0x01ul) // 1/2
+#define CRG_TIMERCLK_PVSR_DIV4 (0x02ul) // 1/4
+#define CRG_TIMERCLK_PVSR_DIV8 (0x03ul) // 1/8
+#define CRG_TIMERCLK_PVSR_DIV16 (0x04ul) // 1/16
+#define CRG_TIMERCLK_PVSR_DIV32 (0x05ul) // 1/32
+#define CRG_TIMERCLK_PVSR_DIV64 (0x06ul) // 1/64
+#define CRG_TIMERCLK_PVSR_DIV128 (0x07ul) // 1/128
+/**************** Bit definition for CRG_PWMnCLK_SSR **************************/
+#define CRG_PWMCLK_SSR_DIS (0x00ul) // Disable clock
+#define CRG_PWMCLK_SSR_MCLK (0x01ul) // PLL output clock(MCLK)
+#define CRG_PWMCLK_SSR_RCLK (0x02ul) // Internal 8MHz RC oscillator clock(RCLK)
+#define CRG_PWMCLK_SSR_OCLK (0x03ul) // External oscillator clock(OCLK, 8MHz ~ 24MHz)
+/**************** Bit definition for CRG_PWMnCLK_PVSR **************************/
+#define CRG_PWMCLK_PVSR_DIV1 (0x00ul) // 1/1 (bypass)
+#define CRG_PWMCLK_PVSR_DIV2 (0x01ul) // 1/2
+#define CRG_PWMCLK_PVSR_DIV4 (0x02ul) // 1/4
+#define CRG_PWMCLK_PVSR_DIV8 (0x03ul) // 1/8
+#define CRG_PWMCLK_PVSR_DIV16 (0x04ul) // 1/16
+#define CRG_PWMCLK_PVSR_DIV32 (0x05ul) // 1/32
+#define CRG_PWMCLK_PVSR_DIV64 (0x06ul) // 1/64
+#define CRG_PWMCLK_PVSR_DIV128 (0x07ul) // 1/128
+/**************** Bit definition for CRG_RTC_HS_SSR **************************/
+#define CRG_RTC_HS_SSR_DIS (0x00ul) // Disable clock
+#define CRG_RTC_HS_SSR_MCLK (0x01ul) // PLL output clock(MCLK)
+#define CRG_RTC_HS_SSR_RCLK (0x02ul) // Internal 8MHz RC oscillator clock(RCLK)
+#define CRG_RTC_HS_SSR_OCLK (0x03ul) // External oscillator clock(OCLK, 8MHz ~ 24MHz)
+/**************** Bit definition for CRG_RTC_HS_PVSR **************************/
+#define CRG_RTC_HS_PVSR_DIV1 (0x00ul) // 1/1 (bypass)
+#define CRG_RTC_HS_PVSR_DIV2 (0x01ul) // 1/2
+#define CRG_RTC_HS_PVSR_DIV4 (0x02ul) // 1/4
+#define CRG_RTC_HS_PVSR_DIV8 (0x03ul) // 1/8
+#define CRG_RTC_HS_PVSR_DIV16 (0x04ul) // 1/16
+#define CRG_RTC_HS_PVSR_DIV32 (0x05ul) // 1/32
+#define CRG_RTC_HS_PVSR_DIV64 (0x06ul) // 1/64
+#define CRG_RTC_HS_PVSR_DIV128 (0x07ul) // 1/128
+/**************** Bit definition for CRG_RTC_SSR **************************/
+#define CRG_RTC_SSR_HS (0x00ul) // RTCCLK HS(High Speed clock)
+#define CRG_RTC_SSR_LW (0x01ul) // 32K_OSC_CLK(Low Speed external oscillator clock)
+/**************** Bit definition for CRG_WDOGCLK_HS_SSR **************************/
+#define CRG_WDOGCLK_HS_SSR_DIS (0x00ul) // Disable clock
+#define CRG_WDOGCLK_HS_SSR_MCLK (0x01ul) // PLL output clock(MCLK)
+#define CRG_WDOGCLK_HS_SSR_RCLK (0x02ul) // Internal 8MHz RC oscillator clock(RCLK)
+#define CRG_WDOGCLK_HS_SSR_OCLK (0x03ul) // External oscillator clock(OCLK, 8MHz ~ 24MHz)
+/**************** Bit definition for CRG_WDOGCLK_HS_PVSR **************************/
+#define CRG_WDOGCLK_HS_PVSR_DIV1 (0x00ul) // 1/1 (bypass)
+#define CRG_WDOGCLK_HS_PVSR_DIV2 (0x01ul) // 1/2
+#define CRG_WDOGCLK_HS_PVSR_DIV4 (0x02ul) // 1/4
+#define CRG_WDOGCLK_HS_PVSR_DIV8 (0x03ul) // 1/8
+#define CRG_WDOGCLK_HS_PVSR_DIV16 (0x04ul) // 1/16
+#define CRG_WDOGCLK_HS_PVSR_DIV32 (0x05ul) // 1/32
+#define CRG_WDOGCLK_HS_PVSR_DIV64 (0x06ul) // 1/64
+#define CRG_WDOGCLK_HS_PVSR_DIV128 (0x07ul) // 1/128
+/**************** Bit definition for CRG_WDOGCLK_SSR **************************/
+#define CRG_WDOGCLK_SSR_HS (0x00ul) // RTCCLK HS(High Speed clock)
+#define CRG_WDOGCLK_SSR_LW (0x01ul) // 32K_OSC_CLK(Low Speed external oscillator clock)
+/**************** Bit definition for CRG_UARTCLK_SSR **************************/
+#define CRG_UARTCLK_SSR_DIS (0x00ul) // Disable clock
+#define CRG_UARTCLK_SSR_MCLK (0x01ul) // PLL output clock(MCLK)
+#define CRG_UARTCLK_SSR_RCLK (0x02ul) // Internal 8MHz RC oscillator clock(RCLK)
+#define CRG_UARTCLK_SSR_OCLK (0x03ul) // External oscillator clock(OCLK, 8MHz ~ 24MHz)
+/**************** Bit definition for CRG_UARTCLK_PVSR **************************/
+#define CRG_UARTCLK_PVSR_DIV1 (0x00ul) // 1/1 (bypass)
+#define CRG_UARTCLK_PVSR_DIV2 (0x01ul) // 1/2
+#define CRG_UARTCLK_PVSR_DIV4 (0x02ul) // 1/4
+#define CRG_UARTCLK_PVSR_DIV8 (0x03ul) // 1/8
+/**************** Bit definition for CRG_MIICLK_ECR **************************/
+#define CRG_MIICLK_ECR_EN_RXCLK (0x01ul << 0) // Enable MII_RCK and MII_RCK_N
+#define CRG_MIICLK_ECR_EN_TXCLK (0x01ul << 1) // Enable MII_TCK and MII_TCK_N
+/**************** Bit definition for CRG_MONCLK_SSR **************************/
+#define CRG_MONCLK_SSR_MCLK (0x00ul) // PLL output clock (MCLK)
+#define CRG_MONCLK_SSR_FCLK (0x01ul) // FCLK
+#define CRG_MONCLK_SSR_RCLK (0x02ul) // Internal 8MHz RC oscillator clock(RCLK)
+#define CRG_MONCLK_SSR_OCLK (0x03ul) // External oscillator clock(OCLK, 8MHz ~ 24MHz)
+#define CRG_MONCLK_SSR_ADCCLK (0x04ul) // ADCCLK
+#define CRG_MONCLK_SSR_SSPCLK (0x05ul) // SSPCLK
+#define CRG_MONCLK_SSR_TIMCLK0 (0x06ul) // TIMCLK0
+#define CRG_MONCLK_SSR_TIMCLK1 (0x07ul) // TIMCLK1
+#define CRG_MONCLK_SSR_PWMCLK0 (0x08ul) // PWMCLK0
+#define CRG_MONCLK_SSR_PWMCLK1 (0x09ul) // PWMCLK1
+#define CRG_MONCLK_SSR_PWMCLK2 (0x0Aul) // PWMCLK2
+#define CRG_MONCLK_SSR_PWMCLK3 (0x0Bul) // PWMCLK3
+#define CRG_MONCLK_SSR_PWMCLK4 (0x0Cul) // PWMCLK4
+#define CRG_MONCLK_SSR_PWMCLK5 (0x0Dul) // PWMCLK5
+#define CRG_MONCLK_SSR_PWMCLK6 (0x0Eul) // PWMCLK6
+#define CRG_MONCLK_SSR_PWMCLK7 (0x0Ful) // PWMCLK7
+#define CRG_MONCLK_SSR_UARTCLK (0x10ul) // UARTCLK
+#define CRG_MONCLK_SSR_MII_RXCLK (0x11ul) // MII_RXCLK
+#define CRG_MONCLK_SSR_MII_TXCLK (0x12ul) // MII_TXCLK
+#define CRG_MONCLK_SSR_RTCCLK (0x13ul) // RTCCLK
+
+/******************************************************************************/
+/* */
+/* UART */
+/* */
+/******************************************************************************/
+/****************** Bit definition for UART Data(UARTDR) register *************************/
+#define UART_DR_OE (0x01ul << 11) // Overrun Error
+#define UART_DR_BE (0x01ul << 10) // Break Error
+#define UART_DR_PE (0x01ul << 9) // Parity Error
+#define UART_DR_FE (0x01ul << 8) // Framing Error
+//#define UART_DR_DR // ToDo
+/***************** Bit definition for UART Receive Status(UARTRSR) register ***************/
+#define UARTR_SR_OE (0x01ul << 3) // Overrun Error
+#define UARTR_SR_BE (0x01ul << 2) // Break Error
+#define UARTR_SR_PE (0x01ul << 1) // Parity Error
+#define UARTR_SR_FE (0x01ul << 0) // Framing Error
+/***************** Bit definition for UART Error Clear(UARTECR) register ******************/
+#define UARTE_CR_OE (0x01ul << 3) // Overrun Error
+#define UARTE_CR_BE (0x01ul << 2) // Break Error
+#define UARTE_CR_PE (0x01ul << 1) // Parity Error
+#define UARTE_CR_FE (0x01ul << 0) // Framing Error
+/****************** Bit definition for UART Flags(UARTFR) register ************************/
+#define UART_FR_RI (0x01ul << 8) // Ring indicator
+#define UART_FR_TXFE (0x01ul << 7) // Transmit FIFO empty
+#define UART_FR_RXFF (0x01ul << 6) // Receive FIFO full
+#define UART_FR_TXFF (0x01ul << 5) // Transmit FIFO full
+#define UART_FR_RXFE (0x01ul << 4) // Receive FIFO empty
+#define UART_FR_BUSY (0x01ul << 3) // UART busy
+#define UART_FR_DCD (0x01ul << 2) // Data carrier detect
+#define UART_FR_DSR (0x01ul << 1) // Data set ready
+#define UART_FR_CTS (0x01ul << 0) // Clear to send
+/********** Bit definition for UART Low-power Counter(UARTILPR) register *******************/
+#define UARTILPR_COUNTER (0xFFul << 0) // 8-bit low-power divisor value (0..255)
+/********************* Bit definition for Line Control(UARTLCR_H) register *****************/
+#define UART_LCR_H_SPS (0x1ul << 7) // Stick parity select
+#define UART_LCR_H_WLEN(n) ((n & 0x3ul) << 5) // Word length ( 0=5bits, 1=6bits, 2=7bits, 3=8bits )
+#define UART_LCR_H_FEN (0x1ul << 4) // Enable FIFOs
+#define UART_LCR_H_STP2 (0x1ul << 3) // Two stop bits select
+#define UART_LCR_H_EPS (0x1ul << 2) // Even parity select
+#define UART_LCR_H_PEN (0x1ul << 1) // Parity enable
+#define UART_LCR_H_BRK (0x1ul << 0) // Send break
+/********************* Bit definition for Contro(UARTCR) register *************************/
+#define UART_CR_CTSEn (0x1ul << 15) // CTS hardware flow control enable
+#define UART_CR_RTSEn (0x1ul << 14) // RTS hardware flow control enable
+#define UART_CR_Out2 (0x1ul << 13) // Complement of Out2 modem status output
+#define UART_CR_Out1 (0x1ul << 12) // Complement of Out1 modem status output
+#define UART_CR_RTS (0x1ul << 11) // Request to send
+#define UART_CR_DTR (0x1ul << 10) // Data transmit ready
+#define UART_CR_RXE (0x1ul << 9) // Receive enable
+#define UART_CR_TXE (0x1ul << 8) // Transmit enable
+#define UART_CR_LBE (0x1ul << 7) // Loop-back enable
+#define UART_CR_SIRLP (0x1ul << 2) // IrDA SIR low power mode
+#define UART_CR_SIREN (0x1ul << 1) // SIR enable
+#define UART_CR_UARTEN (0x1ul << 0) // UART enable
+/******* Bit definition for Interrupt FIFO Level Select(UARTIFLS) register *****************/
+#define UART_IFLS_RXIFLSEL(n) ((n & 0x7ul) << 3) // Receive interrupt FIFO level select(0=1/8 full, 1=1/4 full, 2=1/2 full, 3=3/4 full, 4=7/8 full)
+#define UART_IFLS_TXIFLSEL(n) ((n & 0x7ul) << 0) // Transmit interrupt FIFO level select(0=1/8 full, 1=1/4 full, 2=1/2 full, 3=3/4 full, 4=7/8 full)
+/******* Bit definition for Interrupt Mask Set/Clear(UARTIMSC) register ********************/
+#define UART_IMSC_OEIM (0x1ul << 10) // Overrun error interrupt mask
+#define UART_IMSC_BEIM (0x1ul << 9) // Break error interrupt mask
+#define UART_IMSC_PEIM (0x1ul << 8) // Parity error interrupt mask
+#define UART_IMSC_FEIM (0x1ul << 7) // Framing error interrupt mask
+#define UART_IMSC_RTIM (0x1ul << 6) // Receive interrupt mask
+#define UART_IMSC_TXIM (0x1ul << 5) // Transmit interrupt mask
+#define UART_IMSC_RXIM (0x1ul << 4) // Receive interrupt mask
+#define UART_IMSC_DSRMIM (0x1ul << 3) // nUARTDSR modem interrupt mask
+#define UART_IMSC_DCDMIM (0x1ul << 2) // nUARTDCD modem interrupt mask
+#define UART_IMSC_CTSMIM (0x1ul << 1) // nUARTCTS modem interrupt mask
+#define UART_IMSC_RIMIM (0x1ul << 0) // nUARTRI modem interrupt mask
+/*************** Bit definition for Raw Interrupt Status(UARTRIS) register *****************/
+#define UART_RIS_OEIM (0x1ul << 10) // Overrun error interrupt status
+#define UART_RIS_BEIM (0x1ul << 9) // Break error interrupt status
+#define UART_RIS_PEIM (0x1ul << 8) // Parity error interrupt status
+#define UART_RIS_FEIM (0x1ul << 7) // Framing error interrupt status
+#define UART_RIS_RTIM (0x1ul << 6) // Receive interrupt status
+#define UART_RIS_TXIM (0x1ul << 5) // Transmit interrupt status
+#define UART_RIS_RXIM (0x1ul << 4) // Receive interrupt status
+#define UART_RIS_DSRMIM (0x1ul << 3) // nUARTDSR modem interrupt status
+#define UART_RIS_DCDMIM (0x1ul << 2) // nUARTDCD modem interrupt status
+#define UART_RIS_CTSMIM (0x1ul << 1) // nUARTCTS modem interrupt status
+#define UART_RIS_RIMIM (0x1ul << 0) // nUARTRI modem interrupt status
+/************** Bit definition for Masked Interrupt Status(UARTMIS) register ****************/
+#define UART_MIS_OEIM (0x1ul << 10) // Overrun error masked interrupt status
+#define UART_MIS_BEIM (0x1ul << 9) // Break error masked interrupt status
+#define UART_MIS_PEIM (0x1ul << 8) // Parity error masked interrupt status
+#define UART_MIS_FEIM (0x1ul << 7) // Framing error masked interrupt status
+#define UART_MIS_RTIM (0x1ul << 6) // Receive masked interrupt status
+#define UART_MIS_TXIM (0x1ul << 5) // Transmit masked interrupt status
+#define UART_MIS_RXIM (0x1ul << 4) // Receive masked interrupt status
+#define UART_MIS_DSRMIM (0x1ul << 3) // nUARTDSR modem masked interrupt status
+#define UART_MIS_DCDMIM (0x1ul << 2) // nUARTDCD modem masked interrupt status
+#define UART_MIS_CTSMIM (0x1ul << 1) // nUARTCTS modem masked interrupt status
+#define UART_MIS_RIMIM (0x1ul << 0) // nUARTRI modem masked interrupt status
+/*************** Bit definition for Interrupt Clear(UARTICR) register ************************/
+#define UART_ICR_OEIM (0x1ul << 10) // Overrun error interrupt clear
+#define UART_ICR_BEIM (0x1ul << 9) // Break error interrupt clear
+#define UART_ICR_PEIM (0x1ul << 8) // Parity error interrupt clear
+#define UART_ICR_FEIM (0x1ul << 7) // Framing error interrupt clear
+#define UART_ICR_RTIM (0x1ul << 6) // Receive interrupt clear
+#define UART_ICR_TXIM (0x1ul << 5) // Transmit interrupt clear
+#define UART_ICR_RXIM (0x1ul << 4) // Receive interrupt clear
+#define UART_ICR_DSRMIM (0x1ul << 3) // nUARTDSR modem interrupt clear
+#define UART_ICR_DCDMIM (0x1ul << 2) // nUARTDCD modem interrupt clear
+#define UART_ICR_CTSMIM (0x1ul << 1) // nUARTCTS modem interrupt clear
+#define UART_ICR_RIMIM (0x1ul << 0) // nUARTRI modem interrupt clear
+/***************** Bit definition for DMA Control(UARTDMACR) register ************************/
+#define UART_DMACR_DMAONERR (0x1ul << 2) // DMA on error
+#define UART_DMACR_TXDMAE (0x1ul << 1) // Transmit DMA enable
+#define UART_DMACR_RXDMAE (0x1ul << 0) // Receive DMA enable
+
+/******************************************************************************/
+/* */
+/* Simple UART */
+/* */
+/******************************************************************************/
+/***************** Bit definition for S_UART Data () register ************************/
+#define S_UART_DATA (0xFFul << 0)
+/***************** Bit definition for S_UART State() register ************************/
+#define S_UART_STATE_TX_BUF_OVERRUN (0x01ul << 2) // TX buffer overrun, wirte 1 to clear.
+#define S_UART_STATE_RX_BUF_FULL (0x01ul << 1) // RX buffer full, read only.
+#define S_UART_STATE_TX_BUF_FULL (0x01ul << 0) // TX buffer full, read only.
+/***************** Bit definition for S_UART Control() register ************************/
+#define S_UART_CTRL_HIGH_SPEED_TEST (0x01ul << 6) // High-speed test mode for TX only.
+#define S_UART_CTRL_RX_OVERRUN_EN (0x01ul << 5) // RX overrun interrupt enable.
+#define S_UART_CTRL_TX_OVERRUN_EN (0x01ul << 4) // TX overrun interrupt enable.
+#define S_UART_CTRL_RX_INT_EN (0x01ul << 3) // RX interrupt enable.
+#define S_UART_CTRL_TX_INT_EN (0x01ul << 2) // TX interrupt enable.
+#define S_UART_CTRL_RX_EN (0x01ul << 1) // RX enable.
+#define S_UART_CTRL_TX_EN (0x01ul << 0) // TX enable.
+/***************** Bit definition for S_UART Interrupt() register ************************/
+#define S_UART_INT_RX_OVERRUN (0x01ul << 3) // RX overrun interrupt. Wirte 1 to clear
+#define S_UART_INT_TX_OVERRUN (0x01ul << 2) // TX overrun interrupt. Write 1 to clear
+#define S_UART_INT_RX (0x01ul << 1) // RX interrupt. Write 1 to clear
+#define S_UART_INT_TX (0x01ul << 0) // TX interrupt. Write 1 to clear
+
+/******************************************************************************/
+/* */
+/* Analog Digital Register */
+/* */
+/******************************************************************************/
+
+/*********************** Bit definition for ADC_CTR ***********************/
+//#define ADC_CTR_SAMSEL_ABNORMAL (0x0ul) // Abnormal Operation
+//#define ADC_CTR_SAMSEL_NORMAL (0x1ul) // Normal Operation
+#define ADC_CTR_PWD_NRMOP (0x1ul) // Active Operation
+#define ADC_CTR_PWD_PD (0x3ul) // Power down
+/*********************** Bit definition for ADC_CHSEL ***********************/
+#define ADC_CHSEL_CH0 (0x0ul) // Channel 0
+#define ADC_CHSEL_CH1 (0x1ul) // Channel 1
+#define ADC_CHSEL_CH2 (0x2ul) // Channel 2
+#define ADC_CHSEL_CH3 (0x3ul) // Channel 3
+#define ADC_CHSEL_CH4 (0x4ul) // Channel 4
+#define ADC_CHSEL_CH5 (0x5ul) // Channel 5
+#define ADC_CHSEL_CH6 (0x6ul) // Channel 6
+#define ADC_CHSEL_CH7 (0x7ul) // Channel 7
+#define ADC_CHSEL_CH15 (0xful) // LDO output(1.5V)
+/*********************** Bit definition for ADC_START ***********************/
+#define ADC_START_START (0x1ul) // ADC conversion start
+/*********************** Bit definition for ADC_DATA ***********************/
+//ToDo (Readonly)
+
+/*********************** Bit definition for ADC_INT ***********************/
+#define ADC_INT_MASK_DIS (0x0ul << 1) // Interrupt disable
+#define ADC_INT_MASK_ENA (0x1ul << 1) // Interrupt enable
+//ToDo (Readonly)
+
+/*********************** Bit definition for ADC_INTCLR ***********************/
+#define ADC_INTCLEAR (0x1ul) // ADC Interrupt clear
+
+#define W7500x_ADC_BASE (W7500x_APB2_BASE + 0x00000000UL)
+#define ADC ((ADC_TypeDef *) W7500x_ADC_BASE)
+
+/******************************************************************************/
+/* */
+/* Dual Timer */
+/* */
+/******************************************************************************/
+
+/*********************** Bit definition for dualtimer ***********************/
+#define DUALTIMER_TimerControl_TimerDIsable (0x0ul << 7)
+#define DUALTIMER_TimerControl_TimerEnable (0x1ul << 7)
+#define DUALTIMER_TimerControl_FreeRunning (0x0ul << 6)
+#define DUALTIMER_TimerControl_Periodic (0x1ul << 6)
+#define DUALTIMER_TimerControl_IntDisable (0x0ul << 5)
+#define DUALTIMER_TimerControl_IntEnable (0x1ul << 5)
+#define DUALTIMER_TimerControl_Pre_1 (0x0ul << 2)
+#define DUALTIMER_TimerControl_Pre_16 (0x1ul << 2)
+#define DUALTIMER_TimerControl_Pre_256 (0x2ul << 2)
+#define DUALTIMER_TimerControl_Size_16 (0x0ul << 1)
+#define DUALTIMER_TimerControl_Size_32 (0x1ul << 1)
+#define DUALTIMER_TimerControl_Wrapping (0x0ul << 0)
+#define DUALTIMER_TimerControl_OneShot (0x1ul << 0)
+
+/******************************************************************************/
+/* */
+/* External Interrupt */
+/* */
+/******************************************************************************/
+
+/**************** Bit definition for Px_IER **************************/
+#define EXTI_Px_INTPOR_RISING_EDGE (0x00ul << 0)
+#define EXTI_Px_INTPOR_FALLING_EDGE (0x01ul << 0)
+#define EXTI_Px_INTEN_DISABLE (0x00ul << 1)
+#define EXTI_Px_INTEN_ENABLE (0x01ul << 1)
+
+/******************************************************************************/
+/* */
+/* GPIO */
+/* */
+/******************************************************************************/
+
+/**************** Bit definition for Px_AFSR **************************/
+#define Px_AFSR_AF0 (0x00ul)
+#define Px_AFSR_AF1 (0x01ul)
+#define Px_AFSR_AF2 (0x02ul)
+#define Px_AFSR_AF3 (0x03ul)
+/**************** Bit definition for Px_PCR **************************/
+#define Px_PCR_PUPD_DOWN (0x01ul << 0) // Pull Down
+#define Px_PCR_PUPD_UP (0x01ul << 1) // Pull Up
+#define Px_PCR_DS_HIGH (0x01ul << 2) // High Driving
+#define Px_PCR_OD (0x01ul << 3) // Open Drain
+#define Px_PCR_IE (0x01ul << 5) // Input Buffer Enable
+#define Px_PCR_CS_SUMMIT (0x01ul << 6) // Use Summit Trigger Input Buffer
+
+/******************************************************************************/
+/* */
+/* I2C */
+/* */
+/******************************************************************************/
+
+/**************** Bit definition for I2C_CTR **************************/
+#define I2C_CTR_COREEN (0x01ul << 7 ) // 0x80
+#define I2C_CTR_INTEREN (0x01ul << 6 ) // 0x40
+#define I2C_CTR_MODE (0x01ul << 5 ) // 0x20
+#define I2C_CTR_ADDR10 (0x01ul << 4 ) // 0x10
+#define I2C_CTR_CTRRWN (0x01ul << 3 ) // 0x08
+#define I2C_CTR_CTEN (0x01ul << 2 ) // 0x04
+
+/**************** Bit definition for I2C_CMDR **************************/
+#define I2C_CMDR_STA (0x01ul << 7 ) // 0x80
+#define I2C_CMDR_STO (0x01ul << 6 ) // 0x40
+#define I2C_CMDR_ACK (0x01ul << 5 ) // 0x20
+#define I2C_CMDR_RESTA (0x01ul << 4 ) // 0x10
+
+/**************** Bit definition for I2C_ISCR **************************/
+#define I2C_ISCR_RST (0x01ul << 1) // 0x01
+
+/**************** Bit definition for I2C_SR **************************/
+#define I2C_SR_TX (0x01ul << 9 ) // 0x200
+#define I2C_SR_RX (0x01ul << 8 ) // 0x100
+#define I2C_SR_ACKT (0x01ul << 7 ) // 0x080
+#define I2C_SR_BT (0x01ul << 6 ) // 0x040
+#define I2C_SR_SA (0x01ul << 5 ) // 0x020
+#define I2C_SR_SB (0x01ul << 4 ) // 0x010
+#define I2C_SR_AL (0x01ul << 3 ) // 0x008
+#define I2C_SR_TO (0x01ul << 2 ) // 0x004
+#define I2C_SR_SRW (0x01ul << 1 ) // 0x002
+#define I2C_SR_ACKR (0x01ul << 0 ) // 0x001
+
+/**************** Bit definition for I2C_ISR **************************/
+#define I2C_ISR_STAE (0x01ul << 4 ) // 0x010
+#define I2C_ISR_STOE (0x01ul << 3 ) // 0x008
+#define I2C_ISR_TOE (0x01ul << 2 ) // 0x004
+#define I2C_ISR_ACK_RXE (0x01ul << 1 ) // 0x002
+#define I2C_ISR_ACK_TXE (0x01ul << 0 ) // 0x001
+
+/**************** Bit definition for I2C_ISMR **************************/
+#define I2C_ISR_STAEM (0x01ul << 4 ) // 0x010
+#define I2C_ISR_STOEM (0x01ul << 3 ) // 0x008
+#define I2C_ISR_TOEM (0x01ul << 2 ) // 0x004
+#define I2C_ISR_ACK_RXEM (0x01ul << 1 ) // 0x002
+#define I2C_ISR_ACK_TXEM (0x01ul << 0 ) // 0x001
+
+/******************************************************************************/
+/* */
+/* PWM */
+/* */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* Random number generator Register */
+/* */
+/******************************************************************************/
+
+/*********************** Bit definition for RNG_RUN ***********************/
+#define RNG_RUN_STOP (0x0ul) // STOP RNG shift register
+#define RNG_RUN_RUN (0x1ul) // RUN RNG shift register
+/*********************** Bit definition for RNG_SEED ***********************/
+//ToDo
+
+/*********************** Bit definition for RNG_CLKSEL ***********************/
+#define RNG_CLKSEL_RNGCLK (0x0ul) // RNGCLK is source clock for rng shift register
+#define RNG_CLKSEL_APBCLK (0x1ul) // APBCLK is source clock for rng shift register
+/*********************** Bit definition for RNG_ENABLE ***********************/
+#define RNG_MANUAL_DISABLE (0x0ul) // RNG disble
+#define RNG_MANUAL_ENABLE (0x1ul) // RNG enable
+/*********************** Bit definition for RNG_RN ***********************/
+//ToDo
+
+/*********************** Bit definition for RNG_POLY ***********************/
+//ToDo
+
+
+
+#if !defined (USE_HAL_DRIVER)
+#define USE_HAL_DRIVER
+#endif /* USE_HAL_DRIVER */
+
+
+
+#if defined (USE_HAL_DRIVER)
+ #include "W7500x_conf.h"
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* W7500x_H */
+
+
+
+/************************ (C) COPYRIGHT Wiznet *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZwiki_W7500/W7500x_adc.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,59 @@
+/**
+ ******************************************************************************
+ * @file
+ * @author
+ * @version
+ * @date
+ * @brief This file contains all the functions prototypes for the ADC
+ * firmware library.
+ ******************************************************************************
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __W7500X_ADC_H
+#define __W7500X_ADC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "W7500x.h"
+
+typedef enum { ADC_CH0 = 0,
+ ADC_CH1 = 1,
+ ADC_CH2 = 2,
+ ADC_CH3 = 3,
+ ADC_CH4 = 4,
+ ADC_CH5 = 5,
+ ADC_CH6 = 6,
+ ADC_CH7 = 7,
+ ADC_CH15 = 15} ADC_CH;
+
+#define IS_ADC_CH_NUM(NUM) (((NUM) == ADC_CH0) || \
+ ((NUM) == ADC_CH1) || \
+ ((NUM) == ADC_CH2) || \
+ ((NUM) == ADC_CH3) || \
+ ((NUM) == ADC_CH4) || \
+ ((NUM) == ADC_CH5) || \
+ ((NUM) == ADC_CH6) || \
+ ((NUM) == ADC_CH7) || \
+ ((NUM) == ADC_CH15))
+
+void ADC_Init(void);
+void ADC_DeInit(void);
+void ADC_PowerDownEnable (FunctionalState NewState);
+void ADC_ChannelSelect (ADC_CH num);
+void ADC_Start (void);
+uint16_t ADC_ReadData (void);
+void ADC_InterruptMask (FunctionalState NewState);
+uint8_t ADC_IsInterrupt (void);
+void ADC_InterruptClear (void);
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif //__W7500X_ADC_H
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_WIZwiki_W7500/W7500x_conf.h Tue Jun 09 14:29:26 2015 +0100 @@ -0,0 +1,15 @@ +#include "W7500x_gpio.h" +#include "W7500x_exti.h" +#include "W7500x_pwm.h" +#include "W7500x_uart.h" +#include "W7500x_i2c.h" +#include "W7500x_adc.h" +#include "system_W7500x.h" + + +#ifdef USE_FULL_ASSERT + #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__,__LINE__)) +#else + #define assert_param(expr) ((void)0) +#endif /* USE_FULL_ASSERT */ +
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZwiki_W7500/W7500x_crg.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,145 @@
+/**
+ ******************************************************************************
+ * @file
+ * @author
+ * @version
+ * @date
+ * @brief This file contains all the functions prototypes for the Clock Reset Generator
+ * firmware library.
+ ******************************************************************************
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __W7500X_CRG_H
+#define __W7500X_CRG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "W7500x.h"
+
+// It will be in W7500x_crg.h
+typedef enum { CRG_CLK_DIS = 0, CRG_MCLK, CRG_RCLK, CRG_OCLK } CRG_CLK_SOURCE;
+typedef enum { CRG_CLK_HIGH = 0, CRG_CLK_LOW } CRG_CLK_LOW_SOURCE;
+typedef enum { CRG_PREDIV1 = 0, CRG_PREDIV2, CRG_PREDIV4, CRG_PREDIV8, CRG_PREDIV16, \
+ CRG_PREDIV32, CRG_PREDIV64, CRG_PREDIV128 } CRG_PREDIV;
+typedef enum { CRG_TIMER0 = 0, CRG_TIMER1 } CRG_TIMER;
+typedef enum { CRG_PWM0 = 0, CRG_PWM1, CRG_PWM2, CRG_PWM3, CRG_PWM4, CRG_PWM5, CRG_PWM6, CRG_PWM7 } CRG_PWM;
+
+
+
+#define IS_CRG_PLL_SRC(SRC) (((SRC) == CRG_RCLK) || ((SRC) == CRG_OCLK))
+#define IS_CRG_FCLK_SRC(SRC) (((SRC) == CRG_MCLK) || ((SRC) == CRG_RCLK) || ((SRC) == CRG_OCLK))
+
+#define CRG_CLK_SRC_DEFAULT(SRC) (((SRC) == CRG_CLK_DIS) || ((SRC) == CRG_MCLK) || \
+ ((SRC) == CRG_RCLK) || ((SRC) == CRG_OCLK))
+#define CRG_CLK_SRC_LOW(SRC) (((SRC) == CRG_CLK_HIGH) || ((SRC) == CRG_CLK_LOW))
+
+#define CRG_CLK_PREDIV_DEFAULT(DIV) (((DIV) == CRG_PREDIV1) || ((DIV) == CRG_PREDIV2) || \
+ ((DIV) == CRG_PREDIV4) || ((DIV) == CRG_PREDIV8))
+#define CRG_CLK_PREDIV_ADVANCE(DIV) (((DIV) == CRG_PREDIV1) || ((DIV) == CRG_PREDIV2) || \
+ ((DIV) == CRG_PREDIV4) || ((DIV) == CRG_PREDIV8) || \
+ ((DIV) == CRG_PREDIV16) || ((DIV) == CRG_PREDIV32) || \
+ ((DIV) == CRG_PREDIV64) || ((DIV) == CRG_PREDIV128))
+
+
+#define IS_CRG_FCLK_PREDIV(DIV) CRG_CLK_PREDIV_DEFAULT(DIV)
+
+#define IS_CRG_SSPCLK_SRC(SRC) CRG_CLK_SRC_DEFAULT(SRC)
+#define IS_CRG_SSPCLK_PREDIV(DIV) CRG_CLK_PREDIV_DEFAULT(DIV)
+
+#define IS_CRG_ADCCLK_PREDIV(DIV) CRG_CLK_PREDIV_DEFAULT(DIV)
+#define IS_CRG_ADCCLK_SRC(SRC) CRG_CLK_SRC_DEFAULT(SRC)
+
+
+
+
+
+#define IS_CRG_TIMERCLK_NUM(NUM) (((NUM) == CRG_TIMER0) || ((NUM) == CRG_TIMER1))
+#define IS_CRG_TIMERCLK_SRC(SRC) CRG_CLK_SRC_DEFAULT(SRC)
+#define IS_CRG_TIMERCLK_PREDIV(DIV) CRG_CLK_PREDIV_ADVANCE(DIV)
+
+#define CRG_SET_TIMERCLK_SSR(NUM,VALUE) \
+ (*((volatile uint32_t *)(CRG->TIMER0CLK_SSR) + (0x10ul * NUM)) = VALUE)
+#define CRG_SET_TIMERCLK_PREDIV(NUM,VALUE) \
+ (*((volatile uint32_t *)(CRG->TIMER0CLK_PVSR) + (0x10ul * NUM)) = VALUE)
+//#define CRG_SET_TIMERCLK_SSR(num,value) CRG->TIMER##num##CLK_SSR = value
+//#define CRG_SET_TIMERCLK_PREDIV(num,value) CRG->TIMER##num##CLK_PVSR = value
+
+
+#define IS_CRG_PWMCLK_NUM(NUM) (((NUM) == CRG_PWM0) || ((NUM) == CRG_PWM1) || \
+ ((NUM) == CRG_PWM2) || ((NUM) == CRG_PWM3) || \
+ ((NUM) == CRG_PWM4) || ((NUM) == CRG_PWM5) || \
+ ((NUM) == CRG_PWM6) || ((NUM) == CRG_PWM7) )
+#define IS_CRG_PWMCLK_SRC(SRC) CRG_CLK_SRC_DEFAULT(SRC)
+#define IS_CRG_PWMCLK_PREDIV(DIV) CRG_CLK_PREDIV_ADVANCE(DIV)
+
+#define CRG_SET_PWMCLK_SSR(NUM,VALUE) \
+ (*((volatile uint32_t *)(CRG->PWM0CLK_SSR) + (0x10ul * NUM)) = VALUE)
+#define CRG_SET_PWMCLK_PREDIV(NUM,VALUE) \
+ (*((volatile uint32_t *)(CRG->PWM0CLK_PVSR) + (0x10ul * NUM)) = VALUE)
+//#define CRG_SET_PWMCLK_SSR(num,value) CRG->PWM##num##CLK_SSR = value
+//#define CRG_SET_PWMCLK_PREDIV(num,value) CRG->PWM##num##CLK_PVSR = value
+
+#define IS_CRG_RTC_HS_SRC(SRC) CRG_CLK_SRC_DEFAULT(SRC)
+#define IS_CRG_RTC_HS_PREDIV(DIV) CRG_CLK_PREDIV_ADVANCE(DIV)
+#define IS_CRG_RTC_LOW_SRC(SRC) CRG_CLK_SRC_LOW(SRC)
+
+#define IS_CRG_WDOGCLK_HS_SRC(SRC) CRG_CLK_SRC_DEFAULT(SRC)
+#define IS_CRG_WDOGCLK_HS_PREDIV(DIV) CRG_CLK_PREDIV_ADVANCE(DIV)
+#define IS_CRG_WDOGCLK_LOW_SRC(SRC) CRG_CLK_SRC_LOW(SRC)
+
+#define IS_CRG_UARTCLK_SRC(SRC) CRG_CLK_SRC_DEFAULT(SRC)
+#define IS_CRG_UARTCLK_PREDIV(DIV) CRG_CLK_PREDIV_DEFAULT(DIV)
+
+#define IS_CRG_MONCLK_SSR(value) (((value) >= 0x00ul) || ((value) <= 0x13ul))
+
+void CRG_DeInit(void);
+void CRG_OSC_PowerDownEnable (FunctionalState NewState);
+void CRG_PLL_PowerDownEnable (FunctionalState NewState);
+void CRG_PLL_OutputEnable (FunctionalState NewState);
+void CRG_PLL_BypassEnable (FunctionalState NewState);
+void CRG_PLL_InputFrequencySelect (CRG_CLK_SOURCE src);
+
+void CRG_FCLK_SourceSelect (CRG_CLK_SOURCE src);
+void CRG_FCLK_SetPrescale (CRG_PREDIV prediv);
+
+void CRG_SSPCLK_SourceSelect (CRG_CLK_SOURCE src);
+void CRG_SSPCLK_SetPrescale (CRG_PREDIV prediv);
+
+void CRG_ADCCLK_SourceSelect (CRG_CLK_SOURCE src);
+void CRG_ADCCLK_SetPrescale (CRG_PREDIV prediv);
+
+void CRG_TIMERCLK_SourceSelect (CRG_TIMER num, CRG_CLK_SOURCE src);
+void CRG_TIMERCLK_SetPrescale (CRG_TIMER num, CRG_PREDIV prediv);
+
+void CRG_PWMCLK_SourceSelect (CRG_PWM num, CRG_CLK_SOURCE src);
+void CRG_PWMCLK_SetPrescale (CRG_PWM num, CRG_PREDIV prediv);
+
+void CRG_RTC_HS_SourceSelect (CRG_CLK_SOURCE src);
+void CRG_RTC_HS_SetPrescale (CRG_PREDIV prediv);
+void CRG_RTC_SourceSelect (CRG_CLK_LOW_SOURCE src);
+
+void CRG_WDOGCLK_HS_SourceSelect (CRG_CLK_SOURCE src);
+void CRG_WDOGCLK_HS_SetPrescale (CRG_PREDIV prediv);
+void CRG_WDOGCLK_SourceSelect (CRG_CLK_LOW_SOURCE src);
+
+void CRG_UARTCLK_SourceSelect (CRG_CLK_SOURCE src);
+void CRG_UARTCLK_SetPrescale (CRG_PREDIV prediv);
+
+void CRG_MII_Enable (FunctionalState rx_clk, FunctionalState tx_clk);
+
+void CRG_SetMonitoringClock (uint32_t value);
+uint32_t CRG_GetMonitoringClock (void);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZwiki_W7500/W7500x_exti.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,86 @@
+/**
+ ******************************************************************************
+ * @file
+ * @author
+ * @version
+ * @date
+ * @brief This file contains all the functions prototypes for the GPIO
+ * firmware library.
+ ******************************************************************************
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __W7500X_EXTI_H
+#define __W7500X_EXTI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+ /* Includes ------------------------------------------------------------------*/
+#include "W7500x.h"
+
+
+ /**
+ * @brief EXTI mode enumeration
+ */
+
+typedef enum
+{
+ EXTI_Mode_Disable = 0x00,
+ EXTI_Mode_Interrupt = 0x02
+}EXTIMode_TypeDef;
+
+#define IS_EXTI_MODE(MODE) (((MODE) == EXTI_Mode_Rising) || \
+ ((MODE) == EXTI_Mode_Interrupt))
+
+/**
+ * @brief EXTI Trigger enumeration
+ */
+
+typedef enum
+{
+ EXTI_Trigger_Rising = 0x00,
+ EXTI_Trigger_Falling = 0x01
+}EXTITrigger_TypeDef;
+
+#define IS_EXTI_TRIGGER(TRIGGER) (((TRIGGER) == EXTI_Trigger_Rising) || \
+ ((TRIGGER) == EXTI_Trigger_Falling))
+
+/**
+ * @brief EXTI Init Structure definition
+ */
+
+typedef struct
+{
+ uint32_t EXTI_Line; /*!< Specifies the EXTI lines to be enabled or disabled.
+ This parameter can be any combination of @ref EXTI_Lines */
+
+ EXTIMode_TypeDef EXTI_Mode; /*!< Specifies the mode for the EXTI lines.This parameter can be a value of @ref EXTIMode_TypeDef */
+
+ EXTITrigger_TypeDef EXTI_Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines.
+ This parameter can be a value of @ref EXTIMode_TypeDef */
+
+}EXTI_InitTypeDef;
+
+/**
+ * @}
+ */
+
+void EXTI_DeInit(void);
+void EXTI_Init(PAD_Type Px, EXTI_InitTypeDef* EXTI_InitStruct);
+void EXTI_Polarity_Set(PAD_Type Px, uint16_t GPIO_Pin, uint16_t Polarity );
+void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct);
+uint32_t EXTI_GetEXTIConfig(PAD_Type Px, uint16_t GPIO_Pin);
+uint16_t EXTI_Px_GetEXTEN(PAD_Type Px);
+uint16_t EXTI_Px_GetEXTINTPOL(PAD_Type Px);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif //__W7500X_EXTI_H
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZwiki_W7500/W7500x_gpio.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,134 @@
+/**
+ ******************************************************************************
+ * @file
+ * @author
+ * @version
+ * @date
+ * @brief This file contains all the functions prototypes for the GPIO
+ * firmware library.
+ ******************************************************************************
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __W7500X_HAL_GPIO_H
+#define __W7500X_HAL_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "W7500x.h"
+
+#define GPIO_Pin_0 (uint16_t)(0x01 << 0) // Pin 0 Selected
+#define GPIO_Pin_1 (uint16_t)(0x01 << 1) // Pin 1 Selected
+#define GPIO_Pin_2 (uint16_t)(0x01 << 2) // Pin 2 Selected
+#define GPIO_Pin_3 (uint16_t)(0x01 << 3) // Pin 3 Selected
+#define GPIO_Pin_4 (uint16_t)(0x01 << 4) // Pin 4 Selected
+#define GPIO_Pin_5 (uint16_t)(0x01 << 5) // Pin 5 Selected
+#define GPIO_Pin_6 (uint16_t)(0x01 << 6) // Pin 6 Selected
+#define GPIO_Pin_7 (uint16_t)(0x01 << 7) // Pin 7 Selected
+#define GPIO_Pin_8 (uint16_t)(0x01 << 8) // Pin 8 Selected
+#define GPIO_Pin_9 (uint16_t)(0x01 << 9) // Pin 9 Selected
+#define GPIO_Pin_10 (uint16_t)(0x01 << 10) // Pin 10 Selected
+#define GPIO_Pin_11 (uint16_t)(0x01 << 11) // Pin 11 Selected
+#define GPIO_Pin_12 (uint16_t)(0x01 << 12) // Pin 12 Selected
+#define GPIO_Pin_13 (uint16_t)(0x01 << 13) // Pin 13 Selected
+#define GPIO_Pin_14 (uint16_t)(0x01 << 14) // Pin 14 Selected
+#define GPIO_Pin_15 (uint16_t)(0x01 << 15) // Pin 15 Selected
+#define GPIO_Pin_All (uint16_t)(0xFFFF) // All pins Selected
+
+
+#define IS_GPIO_PIN(PIN) ((PIN) != (uint16_t)0x00)
+#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || ((PIN) == GPIO_Pin_1) || \
+ (((PIN) == GPIO_Pin_2) || ((PIN) == GPIO_Pin_3) || \
+ (((PIN) == GPIO_Pin_4) || ((PIN) == GPIO_Pin_5) || \
+ (((PIN) == GPIO_Pin_6) || ((PIN) == GPIO_Pin_7) || \
+ (((PIN) == GPIO_Pin_8) || ((PIN) == GPIO_Pin_9) || \
+ (((PIN) == GPIO_Pin_10) || ((PIN) == GPIO_Pin_11) || \
+ (((PIN) == GPIO_Pin_12) || ((PIN) == GPIO_Pin_13) || \
+ (((PIN) == GPIO_Pin_14) || ((PIN) == GPIO_Pin_15) )
+
+
+#define IS_GPIO_ALL_PERIPH(PERIPH) (((PERIPH) == GPIOA) || ((PERIPH) == GPIOB) || \
+ ((PERIPH) == GPIOC) || ((PERIPH) == GPIOD) )
+
+typedef enum
+{
+ GPIO_Mode_IN = 0x00, /*!< GPIO Input Mode */
+ GPIO_Mode_OUT = 0x01, /*!< GPIO Output Mode */
+ GPIO_Mode_AF = 0x02 /*!< GPIO Alternate function Mode */
+}GPIOMode_TypeDef;
+
+typedef enum
+{
+ GPIO_NO_PUPD = 0x0ul,
+ GPIO_PuPd_UP = Px_PCR_PUPD_UP,
+ GPIO_PuPd_DOWN = Px_PCR_PUPD_DOWN,
+ GPIO_OD = Px_PCR_OD,
+}GPIOPad_TypeDef;
+
+typedef struct
+{
+ uint32_t GPIO_Pin;
+ GPIOMode_TypeDef GPIO_Mode;
+ GPIOPad_TypeDef GPIO_Pad;
+}GPIO_InitTypeDef;
+
+typedef enum
+{
+ Bit_RESET = 0,
+ Bit_SET
+}BitAction;
+
+typedef enum
+{
+ PAD_PA = 0,
+ PAD_PB,
+ PAD_PC,
+ PAD_PD
+}PAD_Type;
+
+typedef enum
+{
+ PAD_AF0 = Px_AFSR_AF0,
+ PAD_AF1 = Px_AFSR_AF1,
+ PAD_AF2 = Px_AFSR_AF2,
+ PAD_AF3 = Px_AFSR_AF3
+}PAD_AF_TypeDef;
+
+#define IS_PAD_TYPE(Px) (((Px) == PAD_PA) || ((Px) == PAD_PB) \
+ ((Px) == PAD_PC) || ((Px) == PAD_PD))
+
+#define IS_PA_NUM(NUM) (((NUM)>=0) && ((NUM)<16))
+#define IS_PB_NUM(NUM) (((NUM)>=0) && ((NUM)<16))
+#define IS_PC_NUM(NUM) (((NUM)>=0) && ((NUM)<16))
+#define IS_PD_NUM(NUM) (((NUM)>=0) && ((NUM)< 5))
+
+#define IS_PAD_AF(AF) (((AF) == PAD_AF0) || ((AF) == PAD_AF1) || \
+ ((AF) == PAD_AF2) || ((AF) == PAD_AF3))
+
+
+#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION_ == Bit_RESET) || (ACTION) ==Bit_SET))
+
+void HAL_GPIO_DeInit(GPIO_TypeDef* GPIOx);
+void HAL_GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct);
+void HAL_GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct);
+uint8_t HAL_GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+uint8_t HAL_GPIO_ReadInputData(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+uint8_t HAL_GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+uint16_t HAL_GPIO_ReadOutputData(GPIO_TypeDef* GPIOx);
+void HAL_GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal);
+void HAL_GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal);
+void HAL_PAD_AFConfig(PAD_Type Px, uint16_t Pnum, PAD_AF_TypeDef P_AF);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __W7500X_HAL_GPIO_H
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZwiki_W7500/W7500x_i2c.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,231 @@
+#include "W7500x.h"
+
+/**
+* @defgroup I2C_Public_Types I2X Public Types
+*/
+typedef enum
+{
+ I2C_WRITE_SA7=0,
+ I2C_READ_SA7,
+ //I2C_WRITE_SA10,
+ //I2C_READ_SA10,
+ I2C_CTRWRITE_SA7,
+ I2C_CTRREAD_SA7,
+ //I2C_CTRWRITE_SA10,
+ //I2C_CTRREAD_SA10,
+} I2C_CTR;
+
+typedef enum
+{
+ I2C_ACKR=0,
+ I2C_ACKT,
+ I2C_OACKR,
+ I2C_SACKR,
+ I2C_BT,
+} I2C_SR;
+
+
+typedef enum
+{
+ INT_ACKR=-1,
+ INT_ACKT=-2,
+ INT_NACKR=-3,
+ INT_NACKT=-4,
+ INT_BT=-5,
+} I2C_ERROR;
+
+
+/**
+*@
+*/
+/** @defgroup I2C_registers
+ * @{
+ */
+
+#define I2C_Register_PRER ((uint8_t)0x00)
+#define I2C_Register_CTR ((uint8_t)0x04)
+#define I2C_Register_CMDR ((uint8_t)0x08)
+#define I2C_Register_SR ((uint8_t)0x0C)
+#define I2C_Register_TSR ((uint8_t)0x10)
+#define I2C_Register_SADDR ((uint8_t)0x14)
+#define I2C_Register_TXR ((uint8_t)0x18)
+#define I2C_Register_RXR ((uint8_t)0x1C)
+#define I2C_Register_ISR ((uint8_t)0x20)
+#define I2C_Register_ISCR ((uint8_t)0x24)
+#define I2C_Register_ISMR ((uint8_t)0x28)
+#define IS_I2C_REGISTER(REGISTER) (((REGISTER) == I2C_Register_PRER) || \
+ ((REGISTER) == I2C_Register_CTR) || \
+ ((REGISTER) == I2C_Register_CMDR) || \
+ ((REGISTER) == I2C_Register_SR) || \
+ ((REGISTER) == I2C_Register_TSR) || \
+ ((REGISTER) == I2C_Register_SADDR) || \
+ ((REGISTER) == I2C_Register_TXR) || \
+ ((REGISTER) == I2C_Register_RXR) || \
+ ((REGISTER) == I2C_Register_ISR)|| \
+ ((REGISTER) == I2C_Register_ISCR)| \
+ ((REGISTER) == I2C_Register_ISMR))
+/**
+ * @}
+ */
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+
+
+
+
+
+/**
+ * @}
+ */
+
+/**
+ * @brief I2C Interrput Status Register Mask flags
+ */
+//------------------------------------------------
+// I2C_ISMR_BIT
+//------------------------------------------------
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Private_Defines
+ * @{
+ */
+/* I2C COREEN mask */
+#define I2C_CTR_COREEN_DIS ((uint16_t)0xFF7F)
+
+/* I2C INTEREN mask */
+#define I2C_CTR_INTEREN_DIS ((uint16_t)0xFFBF)
+
+/* I2C MODE(M/SN) mask */
+#define I2C_CTR_MODE_SLAVE ((uint16_t)0xFFDF)
+
+/* I2C ADDR10(10/7N) mask */
+#define I2C_CTR_ADDR10_7BIT ((uint16_t)0xFFEF)
+
+/* I2C CTRRWN(R/WN) mask */
+#define I2C_CTR_CTRRWN_DIS ((uint16_t)0xFFF7)
+
+/* I2C CTREN mask */
+#define I2C_CTR_CTEN_DIS ((uint16_t)0xFFFB)
+
+
+/* I2C START mask */
+#define I2C_CMDR_START_DIS ((uint16_t)0xFF7F)
+
+/* I2C STOP mask */
+#define I2C_CMDR_STOP_DIS ((uint16_t)0xFFBF)
+
+/* I2C ACK mask */
+#define I2C_CMDR_ACK_NAK ((uint16_t)0xFFDF)
+
+/* I2C RESTART mask */
+#define I2C_CMDR_RESTA_DIS ((uint16_t)0xFFEF)
+
+/* I2C INTERRUPT RESET mask */
+#define I2C_ISCR_RST_DIS ((uint16_t)0xFFFE)
+/**
+ * @}
+ */
+
+
+
+#define I2C_WRITE 0
+#define I2C_READ 1
+#define I2C_RWSEL(NewState) (((NewState) == I2C_WRITE)|| \
+ ((NewState) == I2C_READ))
+
+
+#define I2C_Ack_Enable (0x01ul << 5)
+#define I2C_Ack_Disable (0x00ul << 5)
+#define IS_I2C_ACK_NewState(NewState) (((NewState) == I2C_Ack_Enable) || \
+ ((NewState) == I2C_Ack_Disable))
+
+#define I2C_MASTER_MODE (0x01ul << 5 ) // 0x20
+#define I2C_SLAVE_MODE (0x00ul << 5 ) // 0x20
+#define IS_I2C_MODE(MODE) ((MODE) == I2C_MASTER_MODE)|| \
+ (MODE) == I2C_SLAVE_MODE))
+
+#define I2C_CTR_MODE (0x01ul << 5 ) // 0x20
+
+#define SLAVE_ADDR10 0x208
+
+
+typedef enum
+ {
+ I2C_Master = I2C_MASTER_MODE,
+ I2C_Slave = I2C_SLAVE_MODE
+ }I2C_MODE;
+
+
+typedef struct
+{
+ uint8_t prescale;
+ uint16_t timeout;
+ I2C_CTR control;
+}I2C_MasterConfStruct;
+
+
+typedef struct
+{
+ uint32_t mode;
+ uint16_t slave_address; // only on slave mode
+ I2C_MasterConfStruct master;
+}I2C_ConfigStruct;
+
+
+/** @defgroup I2C_Exported_Functions
+ * @{
+ */
+
+uint32_t I2C_Init (I2C_TypeDef* I2Cx, I2C_ConfigStruct conf);
+void setFrequency (I2C_TypeDef* I2Cx, uint8_t prescale);
+void I2C_DeInit (I2C_TypeDef* I2Cx);
+
+ErrorStatus I2C_Start (I2C_TypeDef* I2Cx, uint16_t slave_address, I2C_CTR ctr);
+void I2C_Stop (I2C_TypeDef* I2Cx);
+void I2C_Reset (I2C_TypeDef* I2Cx);
+
+void I2C_SendData (I2C_TypeDef* I2Cx,uint16_t Data);
+int8_t I2C_SendDataAck (I2C_TypeDef* I2Cx,uint16_t Data);
+int I2C_ReceiveData (I2C_TypeDef* I2Cx, int last);
+
+int I2C_Burst_Read (I2C_TypeDef* I2Cx, uint16_t address, uint8_t *data, int length, int stop);
+int I2C_Burst_Write (I2C_TypeDef* I2Cx, uint16_t address, uint8_t *data, int length, int stop);
+
+void I2C_Delay (uint32_t nCount);
+
+void I2C_GenerateSTART (I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_GenerateSTOP (I2C_TypeDef* I2Cx, FunctionalState NewState);
+
+void I2C_AcknowledgeConfig (I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_RESTART (I2C_TypeDef * I2Cx, FunctionalState NewState);
+
+void I2C_CoreEn (I2C_TypeDef* I2Cx,FunctionalState NewState);
+void I2C_InterEn (I2C_TypeDef* I2Cx,FunctionalState NewState);
+void I2C_MasterSlave(I2C_TypeDef* I2Cx,FunctionalState NewState);
+void I2C_ControlRW (I2C_TypeDef* I2Cx,FunctionalState NewState);
+void I2C_ControlEn (I2C_TypeDef* I2Cx,FunctionalState NewState);
+
+void I2C_InterRst (I2C_TypeDef* I2Cx,FunctionalState NewState);
+void I2C_Prescale (I2C_TypeDef* I2Cx,uint16_t Data);
+void I2C_TimeoutSet (I2C_TypeDef* I2Cx,uint16_t Data);
+void I2C_SetSlavAddress (I2C_TypeDef* I2Cx,uint16_t Data);
+uint8_t I2C_StatusRead (I2C_TypeDef* I2Cx);
+
+ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx,I2C_SR sr);
+
+void I2C_MasterInit (I2C_TypeDef * I2Cx,uint8_t Prescale,uint16_t Timeout,I2C_CTR Ctr);
+void I2C_SlaveInit (I2C_TypeDef * I2Cx,FunctionalState NewState, uint16_t data);
+void I2C_SendSlaveAddress (I2C_TypeDef* I2Cx, uint8_t SlaveAddress,I2C_CTR Ctr);
+
+int8_t I2C_Restart_Structure(I2C_TypeDef * I2Cx,uint32_t SlaveAddress,I2C_CTR Ctr);
+uint16_t I2C_ReadRegister (I2C_TypeDef* I2Cx, uint8_t I2C_Register);
+
+/**
+ * @}
+ */
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZwiki_W7500/W7500x_pwm.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,289 @@
+/**
+ ******************************************************************************
+ * @file
+ * @author
+ * @version
+ * @date
+ * @brief This file contains all the functions prototypes for the UART
+ * firmware library.
+ ******************************************************************************
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __W7500X_PWM_H
+#define __W7500X_PWM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "W7500x.h"
+
+/**********************************************************************************************/
+/**********************************************************************************************/
+// This structure and define must be in W7500x.h
+/**********************************************************************************************/
+/**********************************************************************************************/
+
+typedef struct
+{
+ uint32_t PWM_CHn_PEEER;
+}PWM_CtrlPWMOutputTypeDef;
+
+typedef struct
+{
+ uint32_t PWM_CHn_PR;
+ uint32_t PWM_CHn_MR;
+ uint32_t PWM_CHn_LR;
+ uint32_t PWM_CHn_UDMR;
+ uint32_t PWM_CHn_PDMR;
+ uint32_t PWM_CHn_DZCR;
+}PWM_DeadzoneModeInitTypDef;
+
+#define IS_PWM_ALL_CH(CHn) ((CHn == PWM_CH0) || \
+ (CHn == PWM_CH1) || \
+ (CHn == PWM_CH2) || \
+ (CHn == PWM_CH3) || \
+ (CHn == PWM_CH4) || \
+ (CHn == PWM_CH5) || \
+ (CHn == PWM_CH6) || \
+ (CHn == PWM_CH7))
+
+#define PWM_IER_IE0_Enable (0x1ul << 0)
+#define PWM_IER_IE1_Enable (0x1ul << 1)
+#define PWM_IER_IE2_Enable (0x1ul << 2)
+#define PWM_IER_IE3_Enable (0x1ul << 3)
+#define PWM_IER_IE4_Enable (0x1ul << 4)
+#define PWM_IER_IE5_Enable (0x1ul << 5)
+#define PWM_IER_IE6_Enable (0x1ul << 6)
+#define PWM_IER_IE7_Enable (0x1ul << 7)
+
+#define PWM_IER_IE0_Disable ~PWM_IER_IE0_Enable
+#define PWM_IER_IE1_Disable ~PWM_IER_IE1_Enable
+#define PWM_IER_IE2_Disable ~PWM_IER_IE2_Enable
+#define PWM_IER_IE3_Disable ~PWM_IER_IE3_Enable
+#define PWM_IER_IE4_Disable ~PWM_IER_IE4_Enable
+#define PWM_IER_IE5_Disable ~PWM_IER_IE5_Enable
+#define PWM_IER_IE6_Disable ~PWM_IER_IE6_Enable
+#define PWM_IER_IE7_Disable ~PWM_IER_IE7_Enable
+
+#define PWM_SSR_SS0_Start (0x1ul << 0)
+#define PWM_SSR_SS1_Start (0x1ul << 1)
+#define PWM_SSR_SS2_Start (0x1ul << 2)
+#define PWM_SSR_SS3_Start (0x1ul << 3)
+#define PWM_SSR_SS4_Start (0x1ul << 4)
+#define PWM_SSR_SS5_Start (0x1ul << 5)
+#define PWM_SSR_SS6_Start (0x1ul << 6)
+#define PWM_SSR_SS7_Start (0x1ul << 7)
+
+#define PWM_SSR_SS0_Stop ~PWM_SSR_SS0_Start
+#define PWM_SSR_SS1_Stop ~PWM_SSR_SS1_Start
+#define PWM_SSR_SS2_Stop ~PWM_SSR_SS2_Start
+#define PWM_SSR_SS3_Stop ~PWM_SSR_SS3_Start
+#define PWM_SSR_SS4_Stop ~PWM_SSR_SS4_Start
+#define PWM_SSR_SS5_Stop ~PWM_SSR_SS5_Start
+#define PWM_SSR_SS6_Stop ~PWM_SSR_SS6_Start
+#define PWM_SSR_SS7_Stop ~PWM_SSR_SS7_Start
+
+#define IS_SSR_BIT_FLAG(FLAG) (FLAG <= 0xFF)
+
+#define PWM_PSR_PS0_Pause (0x1ul << 0)
+#define PWM_PSR_PS1_Pause (0x1ul << 1)
+#define PWM_PSR_PS2_Pause (0x1ul << 2)
+#define PWM_PSR_PS3_Pause (0x1ul << 3)
+#define PWM_PSR_PS4_Pause (0x1ul << 4)
+#define PWM_PSR_PS5_Pause (0x1ul << 5)
+#define PWM_PSR_PS6_Pause (0x1ul << 6)
+#define PWM_PSR_PS7_Pause (0x1ul << 7)
+
+#define PWM_PSR_PS0_Restart ~PWM_PSR_PS0_Pause
+#define PWM_PSR_PS1_Restart ~PWM_PSR_PS1_Pause
+#define PWM_PSR_PS2_Restart ~PWM_PSR_PS2_Pause
+#define PWM_PSR_PS3_Restart ~PWM_PSR_PS3_Pause
+#define PWM_PSR_PS4_Restart ~PWM_PSR_PS4_Pause
+#define PWM_PSR_PS5_Restart ~PWM_PSR_PS5_Pause
+#define PWM_PSR_PS6_Restart ~PWM_PSR_PS6_Pause
+#define PWM_PSR_PS7_Restart ~PWM_PSR_PS7_Pause
+
+#define IS_PWM_PSR_BIT_FLAG(FLAG) (FLAG <= 0xFF)
+
+#define PWM_CHn_IER_MIE (0x1ul << 0) ///< Match Interrupt Enable
+#define PWM_CHn_IER_OIE (0x1ul << 1) ///< Overflow Interrupt Enable
+#define PWM_CHn_IER_CIE (0x1ul << 2) ///< Capture Interrupt Enable
+#define IS_PWM_CHn_IER(FLAG) (FLAG <= 0x7)
+
+#define PWM_CHn_IER_MI_Msk (0x1ul << 0) ///< Match Interrupt Enable Mask
+#define PWM_CHn_IER_OI_Msk (0x1ul << 1) ///< Overflow Interrupt Enable Mask
+#define PWM_CHn_IER_CI_Msk (0x1ul << 2) ///< Capture Interrupt Enable Mask
+
+#define PWM_CHn_ICR_MatchInterruptClear (0x1ul << 0)
+#define PWM_CHn_ICR_OverflowInterruptClear (0x1ul << 1)
+#define PWM_CHn_ICR_CaptureInterruptClear (0x1ul << 2)
+#define IS_PWM_CHn_IntClearFlag(FLAG) FLAG <= 0x7
+
+/*
+#define IS_PWM_STOP(CHn) (((CHn == PWM_CH0) && (PWM->SSR & PWM_SSR_SS0)) || \
+ ((CHn == PWM_CH1) && (PWM->SSR & PWM_SSR_SS1)) || \
+ ((CHn == PWM_CH2) && (PWM->SSR & PWM_SSR_SS2)) || \
+ ((CHn == PWM_CH3) && (PWM->SSR & PWM_SSR_SS3)) || \
+ ((CHn == PWM_CH4) && (PWM->SSR & PWM_SSR_SS4)) || \
+ ((CHn == PWM_CH5) && (PWM->SSR & PWM_SSR_SS5)) || \
+ ((CHn == PWM_CH6) && (PWM->SSR & PWM_SSR_SS6)) || \
+ ((CHn == PWM_CH7) && (PWM->SSR & PWM_SSR_SS7)))
+*/
+
+
+#define IS_PWM_PR_FILTER(MAXVAL) (MAXVAL <= 0x1F)
+
+
+#define PWM_CHn_UDMR_UpCount (0x0ul)
+#define PWM_CHn_UDMR_DownCount (0x1ul)
+#define IS_PWM_CHn_UDMR(MODE) ((MODE == PWM_CHn_UDMR_UpCount) || \
+ (MODE == PWM_CHn_UDMR_DownCount))
+
+#define PWM_CHn_TCMR_TimerMode (0x0ul)
+#define PWM_CHn_TCMR_RisingCounterMode (0x1ul)
+#define PWM_CHn_TCMR_FallingCounterMode (0x2ul)
+#define PWM_CHn_TCMR_BothCounterMode (0x3ul)
+#define IS_PWM_CHn_TCMR(MODE) ((MODE == PWM_CHn_TCMR_RisingCounterMode) || \
+ (MODE == PWM_CHn_TCMR_FallingCounterMode) || \
+ (MODE == PWM_CHn_TCMR_BothCounterMode))
+
+#define PWM_CHn_PEEER_Disable (0x0ul)
+#define PWM_CHn_PEEER_ExtEnable (0x1ul)
+#define PWM_CHn_PEEER_PWMEnable (0x2ul)
+#define IS_PWM_CHn_PEEER(ENABLE) ((ENABLE == PWM_CHn_PEEER_Disable) || \
+ (ENABLE == PWM_CHn_PEEER_ExtEnable) || \
+ (ENABLE == PWM_CHn_PEEER_PWMEnable))
+
+#define IS_PWM_Output(ENABLE) ((ENABLE == PWM_CHn_PEEER_Disable) || \
+ (ENABLE == PWM_CHn_PEEER_PWMEnable))
+
+#define PWM_CHn_CMR_RisingEdge 0x0ul
+#define PWM_CHn_CMR_FallingEdge 0x1ul
+#define IS_PWM_CHn_CMR(MODE) ((MODE == PWM_CHn_CMR_RisingEdge) || \
+ (MODE == PWM_CHn_CMR_FallingEdge))
+
+#define PWM_CHn_PDMR_Oneshot (0x0ul)
+#define PWM_CHn_PDMR_Periodic (0x1ul)
+#define IS_PWM_CHn_PDMR(MODE) ((MODE == PWM_CHn_PDMR_Periodic) || \
+ (MODE == PWM_CHn_PDMR_Oneshot))
+
+#define PWM_CHn_DZER_Enable (0x1ul)
+#define PWM_CHn_DZER_Disable (0x0ul)
+#define PWM_CHn_DZER(ENABLE) ((ENABLE == PWM_CHn_DZER_Enable) || \
+ (ENABLE == PWM_CHn_DZER_Disable))
+
+#define IS_PWM_Deadznoe(CHn) (((CHn == PWM_CH0) && (PWM_CH1->DZER == PWM_CHn_DZER_Disable)) || \
+ ((CHn == PWM_CH1) && (PWM_CH0->DZER == PWM_CHn_DZER_Disable)) || \
+ ((CHn == PWM_CH2) && (PWM_CH3->DZER == PWM_CHn_DZER_Disable)) || \
+ ((CHn == PWM_CH3) && (PWM_CH2->DZER == PWM_CHn_DZER_Disable)) || \
+ ((CHn == PWM_CH4) && (PWM_CH5->DZER == PWM_CHn_DZER_Disable)) || \
+ ((CHn == PWM_CH5) && (PWM_CH4->DZER == PWM_CHn_DZER_Disable)) || \
+ ((CHn == PWM_CH6) && (PWM_CH7->DZER == PWM_CHn_DZER_Disable)) || \
+ ((CHn == PWM_CH7) && (PWM_CH6->DZER == PWM_CHn_DZER_Disable)))
+
+#define IS_PWM_CHn_DZCR_FILTER(MAXVAL) (MAXVAL <= 0x3FF)
+
+
+
+
+
+
+void PWM_DeInit(PWM_CHn_TypeDef* PWM_CHn);
+void PWM_TimerModeInit(PWM_CHn_TypeDef* PWM_CHn, PWM_TimerModeInitTypeDef* PWM_TimerModeInitStruct);
+void PWM_CaptureModeInit(PWM_CHn_TypeDef* PWM_CHn, PWM_CaptureModeInitTypeDef* PWM_CaptureModeInitStruct);
+void PWM_CounterModeInit(PWM_CHn_TypeDef* PWM_CHn, PWM_CounterModeInitTypeDef* PWM_CounterModeInitStruct);
+void PWM_DeadzoneModeInit(PWM_CHn_TypeDef* PWM_CHn, PWM_DeadzoneModeInitTypDef* PWM_DeadzoneModeInitStruct);
+void PWM_CtrlPWMOutput(PWM_CHn_TypeDef* PWM_CHn, uint32_t outputEnDisable );
+void PWM_CtrlPWMOutputEnable(PWM_CHn_TypeDef* PWM_CHn) ;
+void PWM_CtrlPWMOutputDisable(PWM_CHn_TypeDef* PWM_CHn) ;
+void PWM_IntConfig(PWM_CHn_TypeDef* PWM_CHn, FunctionalState state);
+FlagStatus PWM_GetIntEnableStatus(PWM_CHn_TypeDef* PWM_CHn);
+void PWM_CHn_IntConfig(PWM_CHn_TypeDef* PWM_CHn, uint32_t PWM_CHn_IER, FunctionalState state);
+void PWM_CHn_Start(PWM_CHn_TypeDef* PWM_CHn);
+void PWM_Multi_Start(uint32_t ssr_bit_flag);
+void PWM_CHn_Stop(PWM_CHn_TypeDef* PWM_CHn);
+void PWM_Multi_Stop(uint32_t ssr_bit_flag);
+void PWM_CHn_Pause(PWM_CHn_TypeDef* PWM_CHn);
+void PWM_Multi_Pause(uint32_t psr_bit_flag);
+void PWM_CHn_Restart(PWM_CHn_TypeDef* PWM_CHn);
+void PWM_Multi_Restart(uint32_t psr_bit_flag);
+uint32_t PWM_CHn_GetIntEnableStatus(PWM_CHn_TypeDef* PWM_CHn);
+uint32_t PWM_CHn_GetIntFlagStatus(PWM_CHn_TypeDef* PWM_CHn);
+void PWM_CHn_ClearInt(PWM_CHn_TypeDef* PWM_CHn, uint32_t PWM_CHn_ICR);
+uint32_t PWM_CHn_GetTCR(PWM_CHn_TypeDef* PWM_CHn);
+uint32_t PWM_CHn_GetPCR(PWM_CHn_TypeDef* PWM_CHn);
+uint32_t PWM_CHn_GetPR(PWM_CHn_TypeDef* PWM_CHn);
+void PWM_CHn_SetPR(PWM_CHn_TypeDef* PWM_CHn, uint32_t PR);
+uint32_t PWM_CHn_GetMR(PWM_CHn_TypeDef* PWM_CHn);
+void PWM_CHn_SetMR(PWM_CHn_TypeDef* PWM_CHn, uint32_t MR);
+uint32_t PWM_CHn_GetLR(PWM_CHn_TypeDef* PWM_CHn);
+void PWM_CHn_SetLR(PWM_CHn_TypeDef* PWM_CHn, uint32_t LR);
+uint32_t PWM_CHn_GetUDMR(PWM_CHn_TypeDef* PWM_CHn);
+void PWM_CHn_SetUDMR(PWM_CHn_TypeDef* PWM_CHn, uint32_t UDMR);
+uint32_t PWM_CHn_GetTCMR(PWM_CHn_TypeDef* PWM_CHn);
+void PWM_CHn_SetTCMR(PWM_CHn_TypeDef* PWM_CHn, uint32_t TCMR);
+uint32_t PWM_CHn_GetPEEER(PWM_CHn_TypeDef* PWM_CHn);
+void PWM_CHn_SetPEEER(PWM_CHn_TypeDef* PWM_CHn, uint32_t PEEER);
+uint32_t PWM_CHn_GetCMR(PWM_CHn_TypeDef* PWM_CHn);
+void PWM_CHn_SetCMR(PWM_CHn_TypeDef* PWM_CHn, uint32_t CMR);
+uint32_t PWM_CHn_GetCR(PWM_CHn_TypeDef* PWM_CHn);
+uint32_t PWM_CHn_GetPDMR(PWM_CHn_TypeDef* PWM_CHn);
+void PWM_CHn_SetPDMR(PWM_CHn_TypeDef* PWM_CHn, uint32_t PDMR);
+void PWM_CHn_SetDZER(PWM_CHn_TypeDef* PWM_CHn, uint32_t DZER);
+uint32_t PWM_CHn_GetDZCR(PWM_CHn_TypeDef* PWM_CHn);
+void PWM_CHn_SetDZCR(PWM_CHn_TypeDef* PWM_CHn, uint32_t DZCR);
+void PWM_CH0_ClearMatchInt(void);
+void PWM_CH0_ClearOverflowInt(void);
+void PWM_CH0_ClearCaptureInt(void);
+void PWM_CH1_ClearMatchInt(void);
+void PWM_CH1_ClearOverflowInt(void);
+void PWM_CH1_ClearCaptureInt(void);
+void PWM_CH2_ClearMatchInt(void);
+void PWM_CH2_ClearOverflowInt(void);
+void PWM_CH2_ClearCaptureInt(void);
+void PWM_CH3_ClearMatchInt(void);
+void PWM_CH3_ClearOverflowInt(void);
+void PWM_CH3_ClearCaptureInt(void);
+void PWM_CH4_ClearMatchInt(void);
+void PWM_CH4_ClearOverflowInt(void);
+void PWM_CH4_ClearCaptureInt(void);
+void PWM_CH5_ClearMatchInt(void);
+void PWM_CH5_ClearOverflowInt(void);
+void PWM_CH5_ClearCaptureInt(void);
+void PWM_CH6_ClearMatchInt(void);
+void PWM_CH6_ClearOverflowInt(void);
+void PWM_CH6_ClearCaptureInt(void);
+void PWM_CH7_ClearMatchInt(void);
+void PWM_CH7_ClearOverflowInt(void);
+void PWM_CH7_ClearCaptureInt(void);
+
+
+void PWM0_Handler(void);
+void PWM1_Handler(void);
+void PWM2_Handler(void);
+void PWM3_Handler(void);
+void PWM4_Handler(void);
+void PWM5_Handler(void);
+void PWM6_Handler(void);
+void PWM7_Handler(void);
+
+
+
+
+//Temporary macro=======
+#define PWM_CH(N) ((PWM_CHn_TypeDef *) (W7500x_PWM_BASE + (N * 0x100UL)))
+//======================
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif //__W7500X_PWM_H
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZwiki_W7500/W7500x_uart.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,289 @@
+/**
+ ******************************************************************************
+ * @file
+ * @author
+ * @version
+ * @date
+ * @brief This file contains all the functions prototypes for the UART
+ * firmware library.
+ ******************************************************************************
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __W7500X_UART_H
+#define __W7500X_UART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "W7500x.h"
+
+
+/**
+ * @brief UART Init Structure definition
+ */
+
+typedef struct
+{
+ uint32_t UART_BaudRate;
+ uint16_t UART_WordLength;
+ uint16_t UART_StopBits;
+ uint16_t UART_Parity;
+ uint16_t UART_Mode;
+ uint16_t UART_HardwareFlowControl;
+} UART_InitTypeDef;
+
+/**
+ * @}
+ */
+
+
+/** @defgroup UART_Exported_Constants
+ * @{
+ */
+
+#define IS_UART_01_PERIPH(PERIPH) (((PERIPH) == UART0) || ((PERIPH) == UART1))
+#define IS_UART_2_PERIPH(PERIPH) ((PERIPH) == UART2)
+
+/**
+ * @}
+ */
+
+
+
+/** @addtogroup UART_Word_Length
+ * @{
+ */
+
+#define UART_WordLength_8b ((uint16_t)UART_LCR_H_WLEN(3))
+#define UART_WordLength_7b ((uint16_t)UART_LCR_H_WLEN(2))
+#define UART_WordLength_6b ((uint16_t)UART_LCR_H_WLEN(1))
+#define UART_WordLength_5b ((uint16_t)UART_LCR_H_WLEN(0))
+#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WordLength_8b) || \
+ ((LENGTH) == UART_WordLength_7b) || \
+ ((LENGTH) == UART_WordLength_6b) || \
+ ((LENGTH) == UART_WordLength_5b) )
+/**
+ * @}
+ */
+
+
+/** @addtogroup UART_Parity
+ * @{
+ */
+
+#define UART_Parity_No ((uint16_t)0x0000)
+#define UART_Parity_Even ((uint16_t)(UART_LCR_H_PEN | UART_LCR_H_EPS))
+#define UART_Parity_Odd ((uint16_t)(UART_LCR_H_PEN))
+#define IS_UART_PARITY(PARITY) (((PARITY) == UART_Parity_No) || \
+ ((PARITY) == UART_Parity_Even) || \
+ ((PARITY) == UART_Parity_Odd))
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup UART_Stop_Bits
+ * @{
+ */
+
+#define UART_StopBits_1 ((uint16_t)0x0000)
+#define UART_StopBits_2 ((uint16_t)(UART_LCR_H_STP2))
+#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_StopBits_1) || \
+ ((STOPBITS) == UART_StopBits_2))
+/**
+ * @}
+ */
+
+
+/** @addtogroup UART_Mode
+ * @{
+ */
+
+#define UART_Mode_Rx ((uint16_t)(UART_CR_RXE))
+#define UART_Mode_Tx ((uint16_t)(UART_CR_TXE))
+#define IS_UART_MODE(MODE) (((MODE) == UART_Mode_Rx) || \
+ ((MODE) == UART_Mode_Tx))
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup UART_Hardware_Flow_Control
+ * @{
+ */
+
+#define UART_HardwareFlowControl_None ((uint16_t)0x0000)
+#define UART_HardwareFlowControl_RTS ((uint16_t)UART_CR_RTSEn)
+#define UART_HardwareFlowControl_CTS ((uint16_t)UART_CR_CTSEn)
+#define UART_HardwareFlowControl_RTS_CTS ((uint16_t)(UART_CR_RTSEn | UART_CR_CTSEn))
+#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL) \
+ (((CONTROL) == UART_HardwareFlowControl_None) || \
+ ((CONTROL) == UART_HardwareFlowControl_RTS) || \
+ ((CONTROL) == UART_HardwareFlowControl_CTS) || \
+ ((CONTROL) == UART_HardwareFlowControl_RTS_CTS))
+/**
+ * @}
+ */
+
+
+/** @addtogroup UART_Receive Status
+ * @{
+ */
+
+#define UART_RECV_STATUS_OE ((uint16_t)0x01UL << 3) /*!< Overrun error */
+#define UART_RECV_STATUS_BE ((uint16_t)0x01UL << 2) /*!< Break error */
+#define UART_RECV_STATUS_PE ((uint16_t)0x01UL << 1) /*!< Parity error */
+#define UART_RECV_STATUS_FE ((uint16_t)0x01UL << 0) /*!< Framing error */
+#define IS_UART_RECV_STATUS(FLAG) (((FLAG) == UART_RECV_STATUS_OE) || ((FLAG) == UART_RECV_STATUS_BE) || \
+ ((FLAG) == UART_RECV_STATUS_PE) || ((FLAG) == UART_RECV_STATUS_FE))
+/**
+ * @}
+ */
+
+
+
+/** @addtogroup UART_Flags
+ * @{
+ */
+
+#define UART_FLAG_RI ((uint16_t)0x01UL << 8) /*!< Ring indicator */
+#define UART_FLAG_TXFE ((uint16_t)0x01UL << 7) /*!< Transmit FIFO empty */
+#define UART_FLAG_RXFF ((uint16_t)0x01UL << 6) /*!< Receive FIFO full */
+#define UART_FLAG_TXFF ((uint16_t)0x01UL << 5) /*!< Transmit FIFO full */
+#define UART_FLAG_RXFE ((uint16_t)0x01UL << 4) /*!< Receive FIFO empty */
+#define UART_FLAG_BUSY ((uint16_t)0x01UL << 3) /*!< UART busy */
+#define UART_FLAG_DCD ((uint16_t)0x01UL << 2) /*!< Data carrier detect */
+#define UART_FLAG_DSR ((uint16_t)0x01UL << 1) /*!< Data set ready */
+#define UART_FLAG_CTS ((uint16_t)0x01UL << 0) /*!< Clear to send */
+#define IS_UART_FLAG(FLAG) (((FLAG) == UART_FLAG_RI) || ((FLAG) == UART_FLAG_TXFE) || \
+ ((FLAG) == UART_FLAG_RXFF) || ((FLAG) == UART_FLAG_TXFF) || \
+ ((FLAG) == UART_FLAG_RXFE) || ((FLAG) == UART_FLAG_BUSY) || \
+ ((FLAG) == UART_FLAG_DCD) || ((FLAG) == UART_FLAG_DSR) || \
+ ((FLAG) == UART_FLAG_CTS))
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup UART_IT_Flags
+ * @{
+ */
+
+#define UART_IT_FLAG_OEI ((uint16_t)0x01UL << 10) /*!< Overrun error interrupt */
+#define UART_IT_FLAG_BEI ((uint16_t)0x01UL << 9) /*!< Break error interrupt */
+#define UART_IT_FLAG_PEI ((uint16_t)0x01UL << 8) /*!< Parity error interrupt */
+#define UART_IT_FLAG_FEI ((uint16_t)0x01UL << 7) /*!< Framing error interrupt */
+#define UART_IT_FLAG_RTI ((uint16_t)0x01UL << 6) /*!< Receive timeout interrupt */
+#define UART_IT_FLAG_TXI ((uint16_t)0x01UL << 5) /*!< Transmit interrupt */
+#define UART_IT_FLAG_RXI ((uint16_t)0x01UL << 4) /*!< Receive interrupt */
+#define UART_IT_FLAG_DSRMI ((uint16_t)0x01UL << 3) /*!< UARTDSR modem interrupt */
+#define UART_IT_FLAG_DCDMI ((uint16_t)0x01UL << 2) /*!< UARTDCD modem interrupt */
+#define UART_IT_FLAG_CTSMI ((uint16_t)0x01UL << 1) /*!< UARTCTS modem interrupt */
+#define UART_IT_FLAG_RIMI ((uint16_t)0x01UL << 0) /*!< UARTRI modem interrupt */
+#define IS_UART_IT_FLAG(FLAG) (((FLAG) == UART_IT_FLAG_OEI) || ((FLAG) == UART_IT_FLAG_BEI) || \
+ ((FLAG) == UART_IT_FLAG_PEI) || ((FLAG) == UART_IT_FLAG_FEI) || \
+ ((FLAG) == UART_IT_FLAG_RTI) || ((FLAG) == UART_IT_FLAG_TXI) || \
+ ((FLAG) == UART_IT_FLAG_RXI) || ((FLAG) == UART_IT_FLAG_DSRMI) || \
+ ((FLAG) == UART_IT_FLAG_DCDMI)|| ((FLAG) == UART_IT_FLAG_CTSMI) || \
+ ((FLAG) == UART_IT_FLAG_RIMI))
+/**
+ * @}
+ */
+/** @addtogroup UART_FIFO_Level Select
+ * @{
+ */
+
+#define UART_IFLS_RXIFLSEL7_8 ((uint16_t)(UART_IFLS_RXIFLSEL(4)))
+#define UART_IFLS_RXIFLSEL3_4 ((uint16_t)(UART_IFLS_RXIFLSEL(3)))
+#define UART_IFLS_RXIFLSEL1_2 ((uint16_t)(UART_IFLS_RXIFLSEL(2)))
+#define UART_IFLS_RXIFLSEL1_4 ((uint16_t)(UART_IFLS_RXIFLSEL(1)))
+#define UART_IFLS_RXIFLSEL1_8 ((uint16_t)(UART_IFLS_RXIFLSEL(0)))
+#define UART_IFLS_TXIFLSEL7_8 ((uint16_t)(UART_IFLS_TXIFLSEL(4)))
+#define UART_IFLS_TXIFLSEL3_4 ((uint16_t)(UART_IFLS_TXIFLSEL(3)))
+#define UART_IFLS_TXIFLSEL1_2 ((uint16_t)(UART_IFLS_TXIFLSEL(2)))
+#define UART_IFLS_TXIFLSEL1_4 ((uint16_t)(UART_IFLS_TXIFLSEL(1)))
+#define UART_IFLS_TXIFLSEL1_8 ((uint16_t)(UART_IFLS_TXIFLSEL(0)))
+
+#define IS_UART_FIFO_Level(FLAG) (((FLAG) == UART_IFLS_RXIFLSEL7_8) || ((FLAG) == UART_IFLS_RXIFLSEL3_4)|| \
+ ((FLAG) == UART_IFLS_RXIFLSEL1_2)|| ((FLAG) == UART_IFLS_RXIFLSEL1_4)|| ((FLAG) == UART_IFLS_RXIFLSEL1_8)||\
+ ((FLAG) == UART_IFLS_TXIFLSEL7_8)|| ((FLAG) == UART_IFLS_TXIFLSEL3_4)|| \
+ ((FLAG) == UART_IFLS_TXIFLSEL1_2)|| ((FLAG) == UART_IFLS_TXIFLSEL1_4)||((FLAG) == UART_IFLS_TXIFLSEL1_8))
+
+/**
+ * @}
+ */
+
+/** @addtogroup S_UART_Flags
+ * @{
+ */
+#define S_UART_FLAG_RXO ((uint16_t)0x01UL << 3) /*!< RX buffer Overrun */
+#define S_UART_FLAG_TXO ((uint16_t)0x01UL << 2) /*!< TX buffer Overrun */
+#define S_UART_FLAG_RXF ((uint16_t)0x01UL << 1) /*!< RX buffer Full */
+#define S_UART_FLAG_TXF ((uint16_t)0x01UL << 0) /*!< TX buffer Full */
+#define IS_S_UART_FLAG(FLAG) (((FLAG) == S_UART_FLAG_RXO) || ((FLAG) == S_UART_FLAG_TXO) || \
+ ((FLAG) == S_UART_FLAG_RXF) || ((FLAG) == S_UART_FLAG_TXF))
+/**
+ * @}
+ */
+
+
+/** @addtogroup S_UART_IT_Flags
+ * @{
+ */
+
+#define S_UART_IT_FLAG_RXOI ((uint16_t)0x01UL << 5) /*!< RX overrun interrupt */
+#define S_UART_IT_FLAG_TXOI ((uint16_t)0x01UL << 4) /*!< TX overrun interrupt */
+#define S_UART_IT_FLAG_RXI ((uint16_t)0x01UL << 3) /*!< RX interrupt */
+#define S_UART_IT_FLAG_TXI ((uint16_t)0x01UL << 2) /*!< TX interrupt */
+#define IS_S_UART_IT_FLAG(FLAG) (((FLAG) == S_UART_IT_FLAG_RXOI) || ((FLAG) == S_UART_IT_FLAG_TXOI) || \
+ ((FLAG) == S_UART_IT_FLAG_RXI) || ((FLAG) == S_UART_IT_FLAG_TXI))
+
+/**
+ * @}
+ */
+
+
+void UART_StructInit (UART_InitTypeDef* UART_InitStruct);
+
+uint32_t UART_Init (UART_TypeDef *UARTx, UART_InitTypeDef* UART_InitStruct);
+void UART_SendData (UART_TypeDef* UARTx, uint16_t Data);
+uint16_t UART_ReceiveData (UART_TypeDef* UARTx);
+void UART_SendBreak (UART_TypeDef* UARTx);
+void UART_ClearRecvStatus (UART_TypeDef* UARTx, uint16_t UART_RECV_STATUS);
+FlagStatus UART_GetFlagStatus (UART_TypeDef* UARTx, uint16_t UART_FLAG);
+void UART_ITConfig (UART_TypeDef* UARTx, uint16_t UART_IT, FunctionalState NewState);
+ITStatus UART_GetITStatus (UART_TypeDef* UARTx, uint16_t UART_IT);
+void UART_ClearITPendingBit (UART_TypeDef* UARTx, uint16_t UART_IT);
+
+
+void S_UART_DeInit(void);
+uint32_t S_UART_Init(uint32_t baud);
+void S_UART_SendData(uint16_t Data);
+uint16_t S_UART_ReceiveData(void);
+
+
+
+uint8_t UartPutc (UART_TypeDef* UARTx, uint8_t ch);
+void UartPuts (UART_TypeDef* UARTx, uint8_t *str);
+uint8_t UartGetc (UART_TypeDef* UARTx);
+
+uint8_t S_UartPutc(uint8_t ch);
+void S_UartPuts(uint8_t *str);
+uint8_t S_UartGetc(void);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif // __W7500X_UART_H
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_WIZwiki_W7500/cmsis.h Tue Jun 09 14:29:26 2015 +0100 @@ -0,0 +1,38 @@ +/* mbed Microcontroller Library + * A generic CMSIS include header + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_CMSIS_H +#define MBED_CMSIS_H + +#include "W7500x.h" +#include "cmsis_nvic.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZwiki_W7500/cmsis_nvic.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,51 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+#define NVIC_NUM_VECTORS 41
+#define NVIC_USER_IRQ_OFFSET 16
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
+uint32_t NVIC_GetVector(IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZwiki_W7500/core_ca9.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,271 @@
+/**************************************************************************//**
+ * @file core_ca9.h
+ * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File
+ * @version
+ * @date 25 March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CA9_H_GENERIC
+#define __CORE_CA9_H_GENERIC
+
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_A9
+ @{
+ */
+
+/* CMSIS CA9 definitions */
+#define __CA9_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CA9_CMSIS_VERSION_SUB (0x10) /*!< [15:0] CMSIS HAL sub version */
+#define __CA9_CMSIS_VERSION ((__CA9_CMSIS_VERSION_MAIN << 16) | \
+ __CA9_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_A (0x09) /*!< Cortex-A Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /*!< standard types definitions */
+#include "core_caInstr.h" /*!< Core Instruction Access */
+#include "core_caFunc.h" /*!< Core Function Access */
+#include "core_cm4_simd.h" /*!< Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CA9_H_DEPENDANT
+#define __CORE_CA9_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CA9_REV
+ #define __CA9_REV 0x0000
+ #warning "__CA9_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 1
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 1
+ #endif
+
+ #if __Vendor_SysTickConfig == 0
+ #error "__Vendor_SysTickConfig set to 0, but vendor systick timer must be supplied for Cortex-A9"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_A9 */
+
+
+/*******************************************************************************
+ * Register Abstraction
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-A processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t reserved1:7; /*!< bit: 20..23 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/*@} end of group CMSIS_CORE */
+
+/*@} end of CMSIS_Core_FPUFunctions */
+
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZwiki_W7500/core_caFunc.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,1161 @@
+/**************************************************************************//**
+ * @file core_caFunc.h
+ * @brief CMSIS Cortex-A Core Function Access Header File
+ * @version V3.10
+ * @date 9 May 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CAFUNC_H__
+#define __CORE_CAFUNC_H__
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get CPSR Register
+
+ This function returns the content of the CPSR Register.
+
+ \return CPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_CPSR(void)
+{
+ register uint32_t __regCPSR __ASM("cpsr");
+ return(__regCPSR);
+}
+
+/** \brief Set Stack Pointer
+
+ This function assigns the given value to the current stack pointer.
+
+ \param [in] topOfStack Stack Pointer value to set
+ */
+register uint32_t __regSP __ASM("sp");
+__STATIC_INLINE void __set_SP(uint32_t topOfStack)
+{
+ __regSP = topOfStack;
+}
+
+
+/** \brief Get link register
+
+ This function returns the value of the link register
+
+ \return Value of link register
+ */
+register uint32_t __reglr __ASM("lr");
+__STATIC_INLINE uint32_t __get_LR(void)
+{
+ return(__reglr);
+}
+
+/** \brief Set link register
+
+ This function sets the value of the link register
+
+ \param [in] lr LR value to set
+ */
+__STATIC_INLINE void __set_LR(uint32_t lr)
+{
+ __reglr = lr;
+}
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_PSP(uint32_t topOfProcStack)
+{
+ ARM
+ PRESERVE8
+
+ BIC R0, R0, #7 ;ensure stack is 8-byte aligned
+ MRS R1, CPSR
+ CPS #MODE_SYS ;no effect in USR mode
+ MOV SP, R0
+ MSR CPSR_c, R1 ;no effect in USR mode
+ ISB
+ BX LR
+
+}
+
+/** \brief Set User Mode
+
+ This function changes the processor state to User Mode
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_CPS_USR(void)
+{
+ ARM
+
+ CPS #MODE_USR
+ BX LR
+}
+
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+/** \brief Get FPEXC
+
+ This function returns the current value of the Floating Point Exception Control register.
+
+ \return Floating Point Exception Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPEXC(void)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ return(__regfpexc);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPEXC
+
+ This function assigns the given value to the Floating Point Exception Control register.
+
+ \param [in] fpscr Floating Point Exception Control value to set
+ */
+__STATIC_INLINE void __set_FPEXC(uint32_t fpexc)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ __regfpexc = (fpexc);
+#endif
+}
+
+/** \brief Get CPACR
+
+ This function returns the current value of the Coprocessor Access Control register.
+
+ \return Coprocessor Access Control register value
+ */
+__STATIC_INLINE uint32_t __get_CPACR(void)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ return __regCPACR;
+}
+
+/** \brief Set CPACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] cpacr Coporcessor Acccess Control value to set
+ */
+__STATIC_INLINE void __set_CPACR(uint32_t cpacr)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ __regCPACR = cpacr;
+ __ISB();
+}
+
+/** \brief Get CBAR
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Configuration Base Address register value
+ */
+__STATIC_INLINE uint32_t __get_CBAR() {
+ register uint32_t __regCBAR __ASM("cp15:4:c15:c0:0");
+ return(__regCBAR);
+}
+
+/** \brief Get TTBR0
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Translation Table Base Register 0 value
+ */
+__STATIC_INLINE uint32_t __get_TTBR0() {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ return(__regTTBR0);
+}
+
+/** \brief Set TTBR0
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] ttbr0 Translation Table Base Register 0 value to set
+ */
+__STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ __regTTBR0 = ttbr0;
+ __ISB();
+}
+
+/** \brief Get DACR
+
+ This function returns the value of the Domain Access Control Register.
+
+ \return Domain Access Control Register value
+ */
+__STATIC_INLINE uint32_t __get_DACR() {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ return(__regDACR);
+}
+
+/** \brief Set DACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] dacr Domain Access Control Register value to set
+ */
+__STATIC_INLINE void __set_DACR(uint32_t dacr) {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ __regDACR = dacr;
+ __ISB();
+}
+
+/******************************** Cache and BTAC enable ****************************************************/
+
+/** \brief Set SCTLR
+
+ This function assigns the given value to the System Control Register.
+
+ \param [in] sctlr System Control Register, value to set
+ */
+__STATIC_INLINE void __set_SCTLR(uint32_t sctlr)
+{
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ __regSCTLR = sctlr;
+}
+
+/** \brief Get SCTLR
+
+ This function returns the value of the System Control Register.
+
+ \return System Control Register value
+ */
+__STATIC_INLINE uint32_t __get_SCTLR() {
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ return(__regSCTLR);
+}
+
+/** \brief Enable Caches
+
+ Enable Caches
+ */
+__STATIC_INLINE void __enable_caches(void) {
+ // Set I bit 12 to enable I Cache
+ // Set C bit 2 to enable D Cache
+ __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief Disable Caches
+
+ Disable Caches
+ */
+__STATIC_INLINE void __disable_caches(void) {
+ // Clear I bit 12 to disable I Cache
+ // Clear C bit 2 to disable D Cache
+ __set_SCTLR( __get_SCTLR() & ~(1 << 12) & ~(1 << 2));
+ __ISB();
+}
+
+/** \brief Enable BTAC
+
+ Enable BTAC
+ */
+__STATIC_INLINE void __enable_btac(void) {
+ // Set Z bit 11 to enable branch prediction
+ __set_SCTLR( __get_SCTLR() | (1 << 11));
+ __ISB();
+}
+
+/** \brief Disable BTAC
+
+ Disable BTAC
+ */
+__STATIC_INLINE void __disable_btac(void) {
+ // Clear Z bit 11 to disable branch prediction
+ __set_SCTLR( __get_SCTLR() & ~(1 << 11));
+}
+
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __enable_mmu(void) {
+ // Set M bit 0 to enable the MMU
+ // Set AFE bit to enable simplified access permissions model
+ // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+ __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+ __ISB();
+}
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __disable_mmu(void) {
+ // Clear M bit 0 to disable the MMU
+ __set_SCTLR( __get_SCTLR() & ~1);
+ __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief Invalidate the whole tlb
+
+ TLBIALL. Invalidate the whole tlb
+ */
+
+__STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+ register uint32_t __TLBIALL __ASM("cp15:0:c8:c7:0");
+ __TLBIALL = 0;
+ __DSB();
+ __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief Invalidate entire branch predictor array
+
+ BPIALL. Branch Predictor Invalidate All.
+ */
+
+__STATIC_INLINE void __v7_inv_btac(void) {
+ register uint32_t __BPIALL __ASM("cp15:0:c7:c5:6");
+ __BPIALL = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief Invalidate the whole I$
+
+ ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+__STATIC_INLINE void __v7_inv_icache_all(void) {
+ register uint32_t __ICIALLU __ASM("cp15:0:c7:c5:0");
+ __ICIALLU = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new I cache state
+}
+
+/** \brief Clean D$ by MVA
+
+ DCCMVAC. Data cache clean by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_dcache_mva(void *va) {
+ register uint32_t __DCCMVAC __ASM("cp15:0:c7:c10:1");
+ __DCCMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Invalidate D$ by MVA
+
+ DCIMVAC. Data cache invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_inv_dcache_mva(void *va) {
+ register uint32_t __DCIMVAC __ASM("cp15:0:c7:c6:1");
+ __DCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Clean and Invalidate D$ by MVA
+
+ DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+ register uint32_t __DCCIMVAC __ASM("cp15:0:c7:c14:1");
+ __DCCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief
+ * Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency.
+ */
+#pragma push
+#pragma arm
+__STATIC_ASM void __v7_all_cache(uint32_t op) {
+ ARM
+
+ PUSH {R4-R11}
+
+ MRC p15, 1, R6, c0, c0, 1 // Read CLIDR
+ ANDS R3, R6, #0x07000000 // Extract coherency level
+ MOV R3, R3, LSR #23 // Total cache levels << 1
+ BEQ Finished // If 0, no need to clean
+
+ MOV R10, #0 // R10 holds current cache level << 1
+Loop1 ADD R2, R10, R10, LSR #1 // R2 holds cache "Set" position
+ MOV R1, R6, LSR R2 // Bottom 3 bits are the Cache-type for this level
+ AND R1, R1, #7 // Isolate those lower 3 bits
+ CMP R1, #2
+ BLT Skip // No cache or only instruction cache at this level
+
+ MCR p15, 2, R10, c0, c0, 0 // Write the Cache Size selection register
+ ISB // ISB to sync the change to the CacheSizeID reg
+ MRC p15, 1, R1, c0, c0, 0 // Reads current Cache Size ID register
+ AND R2, R1, #7 // Extract the line length field
+ ADD R2, R2, #4 // Add 4 for the line length offset (log2 16 bytes)
+ LDR R4, =0x3FF
+ ANDS R4, R4, R1, LSR #3 // R4 is the max number on the way size (right aligned)
+ CLZ R5, R4 // R5 is the bit position of the way size increment
+ LDR R7, =0x7FFF
+ ANDS R7, R7, R1, LSR #13 // R7 is the max number of the index size (right aligned)
+
+Loop2 MOV R9, R4 // R9 working copy of the max way size (right aligned)
+
+Loop3 ORR R11, R10, R9, LSL R5 // Factor in the Way number and cache number into R11
+ ORR R11, R11, R7, LSL R2 // Factor in the Set number
+ CMP R0, #0
+ BNE Dccsw
+ MCR p15, 0, R11, c7, c6, 2 // DCISW. Invalidate by Set/Way
+ B cont
+Dccsw CMP R0, #1
+ BNE Dccisw
+ MCR p15, 0, R11, c7, c10, 2 // DCCSW. Clean by Set/Way
+ B cont
+Dccisw MCR p15, 0, R11, c7, c14, 2 // DCCISW, Clean and Invalidate by Set/Way
+cont SUBS R9, R9, #1 // Decrement the Way number
+ BGE Loop3
+ SUBS R7, R7, #1 // Decrement the Set number
+ BGE Loop2
+Skip ADD R10, R10, #2 // increment the cache number
+ CMP R3, R10
+ BGT Loop1
+
+Finished
+ DSB
+ POP {R4-R11}
+ BX lr
+
+}
+#pragma pop
+
+/** \brief __v7_all_cache - helper function
+
+ */
+
+/** \brief Invalidate the whole D$
+
+ DCISW. Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_inv_dcache_all(void) {
+ __v7_all_cache(0);
+}
+
+/** \brief Clean the whole D$
+
+ DCCSW. Clean by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_dcache_all(void) {
+ __v7_all_cache(1);
+}
+
+/** \brief Clean and invalidate the whole D$
+
+ DCCISW. Clean and Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_inv_dcache_all(void) {
+ __v7_all_cache(2);
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__ICCARM__)) /*---------------- ICC Compiler ---------------------*/
+
+#error IAR Compiler support not implemented for Cortex-A
+
+#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
+
+/* GNU gcc specific functions */
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i");
+}
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __disable_irq(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("mrs %0, cpsr" : "=r" (result));
+ __ASM volatile ("cpsid i");
+ return(result & 0x80);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+#if 1
+ uint32_t result;
+
+ __ASM volatile ("mrs %0, apsr" : "=r" (result) );
+ return (result);
+#else
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+#endif
+}
+
+
+/** \brief Get CPSR Register
+
+ This function returns the content of the CPSR Register.
+
+ \return CPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CPSR(void)
+{
+#if 1
+ register uint32_t __regCPSR;
+ __ASM volatile ("mrs %0, cpsr" : "=r" (__regCPSR));
+#else
+ register uint32_t __regCPSR __ASM("cpsr");
+#endif
+ return(__regCPSR);
+}
+
+#if 0
+/** \brief Set Stack Pointer
+
+ This function assigns the given value to the current stack pointer.
+
+ \param [in] topOfStack Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_SP(uint32_t topOfStack)
+{
+ register uint32_t __regSP __ASM("sp");
+ __regSP = topOfStack;
+}
+#endif
+
+/** \brief Get link register
+
+ This function returns the value of the link register
+
+ \return Value of link register
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_LR(void)
+{
+ register uint32_t __reglr __ASM("lr");
+ return(__reglr);
+}
+
+#if 0
+/** \brief Set link register
+
+ This function sets the value of the link register
+
+ \param [in] lr LR value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_LR(uint32_t lr)
+{
+ register uint32_t __reglr __ASM("lr");
+ __reglr = lr;
+}
+#endif
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+extern void __set_PSP(uint32_t topOfProcStack);
+
+/** \brief Set User Mode
+
+ This function changes the processor state to User Mode
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+extern void __set_CPS_USR(void);
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+#if 1
+ uint32_t result;
+
+ __ASM volatile ("vmrs %0, fpscr" : "=r" (result) );
+ return (result);
+#else
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#endif
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+#if 1
+ __ASM volatile ("vmsr fpscr, %0" : : "r" (fpscr) );
+#else
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+#endif
+}
+
+/** \brief Get FPEXC
+
+ This function returns the current value of the Floating Point Exception Control register.
+
+ \return Floating Point Exception Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPEXC(void)
+{
+#if (__FPU_PRESENT == 1)
+#if 1
+ uint32_t result;
+
+ __ASM volatile ("vmrs %0, fpexc" : "=r" (result));
+ return (result);
+#else
+ register uint32_t __regfpexc __ASM("fpexc");
+ return(__regfpexc);
+#endif
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPEXC
+
+ This function assigns the given value to the Floating Point Exception Control register.
+
+ \param [in] fpscr Floating Point Exception Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPEXC(uint32_t fpexc)
+{
+#if (__FPU_PRESENT == 1)
+#if 1
+ __ASM volatile ("vmsr fpexc, %0" : : "r" (fpexc));
+#else
+ register uint32_t __regfpexc __ASM("fpexc");
+ __regfpexc = (fpexc);
+#endif
+#endif
+}
+
+/** \brief Get CPACR
+
+ This function returns the current value of the Coprocessor Access Control register.
+
+ \return Coprocessor Access Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CPACR(void)
+{
+#if 1
+ register uint32_t __regCPACR;
+ __ASM volatile ("mrc p15, 0, %0, c1, c0, 2" : "=r" (__regCPACR));
+#else
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+#endif
+ return __regCPACR;
+}
+
+/** \brief Set CPACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] cpacr Coporcessor Acccess Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CPACR(uint32_t cpacr)
+{
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c1, c0, 2" : : "r" (cpacr));
+#else
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ __regCPACR = cpacr;
+#endif
+ __ISB();
+}
+
+/** \brief Get CBAR
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Configuration Base Address register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CBAR() {
+#if 1
+ register uint32_t __regCBAR;
+ __ASM volatile ("mrc p15, 4, %0, c15, c0, 0" : "=r" (__regCBAR));
+#else
+ register uint32_t __regCBAR __ASM("cp15:4:c15:c0:0");
+#endif
+ return(__regCBAR);
+}
+
+/** \brief Get TTBR0
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Translation Table Base Register 0 value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_TTBR0() {
+#if 1
+ register uint32_t __regTTBR0;
+ __ASM volatile ("mrc p15, 0, %0, c2, c0, 0" : "=r" (__regTTBR0));
+#else
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+#endif
+ return(__regTTBR0);
+}
+
+/** \brief Set TTBR0
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] ttbr0 Translation Table Base Register 0 value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c2, c0, 0" : : "r" (ttbr0));
+#else
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ __regTTBR0 = ttbr0;
+#endif
+ __ISB();
+}
+
+/** \brief Get DACR
+
+ This function returns the value of the Domain Access Control Register.
+
+ \return Domain Access Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_DACR() {
+#if 1
+ register uint32_t __regDACR;
+ __ASM volatile ("mrc p15, 0, %0, c3, c0, 0" : "=r" (__regDACR));
+#else
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+#endif
+ return(__regDACR);
+}
+
+/** \brief Set DACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] dacr Domain Access Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_DACR(uint32_t dacr) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c3, c0, 0" : : "r" (dacr));
+#else
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ __regDACR = dacr;
+#endif
+ __ISB();
+}
+
+/******************************** Cache and BTAC enable ****************************************************/
+
+/** \brief Set SCTLR
+
+ This function assigns the given value to the System Control Register.
+
+ \param [in] sctlr System Control Register, value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_SCTLR(uint32_t sctlr)
+{
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c1, c0, 0" : : "r" (sctlr));
+#else
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ __regSCTLR = sctlr;
+#endif
+}
+
+/** \brief Get SCTLR
+
+ This function returns the value of the System Control Register.
+
+ \return System Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_SCTLR() {
+#if 1
+ register uint32_t __regSCTLR;
+ __ASM volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (__regSCTLR));
+#else
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+#endif
+ return(__regSCTLR);
+}
+
+/** \brief Enable Caches
+
+ Enable Caches
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_caches(void) {
+ // Set I bit 12 to enable I Cache
+ // Set C bit 2 to enable D Cache
+ __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief Disable Caches
+
+ Disable Caches
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_caches(void) {
+ // Clear I bit 12 to disable I Cache
+ // Clear C bit 2 to disable D Cache
+ __set_SCTLR( __get_SCTLR() & ~(1 << 12) & ~(1 << 2));
+ __ISB();
+}
+
+/** \brief Enable BTAC
+
+ Enable BTAC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_btac(void) {
+ // Set Z bit 11 to enable branch prediction
+ __set_SCTLR( __get_SCTLR() | (1 << 11));
+ __ISB();
+}
+
+/** \brief Disable BTAC
+
+ Disable BTAC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_btac(void) {
+ // Clear Z bit 11 to disable branch prediction
+ __set_SCTLR( __get_SCTLR() & ~(1 << 11));
+}
+
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_mmu(void) {
+ // Set M bit 0 to enable the MMU
+ // Set AFE bit to enable simplified access permissions model
+ // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+ __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+ __ISB();
+}
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_mmu(void) {
+ // Clear M bit 0 to disable the MMU
+ __set_SCTLR( __get_SCTLR() & ~1);
+ __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief Invalidate the whole tlb
+
+ TLBIALL. Invalidate the whole tlb
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c8, c7, 0" : : "r" (0));
+#else
+ register uint32_t __TLBIALL __ASM("cp15:0:c8:c7:0");
+ __TLBIALL = 0;
+#endif
+ __DSB();
+ __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief Invalidate entire branch predictor array
+
+ BPIALL. Branch Predictor Invalidate All.
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_btac(void) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c5, 6" : : "r" (0));
+#else
+ register uint32_t __BPIALL __ASM("cp15:0:c7:c5:6");
+ __BPIALL = 0;
+#endif
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief Invalidate the whole I$
+
+ ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_icache_all(void) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c5, 0" : : "r" (0));
+#else
+ register uint32_t __ICIALLU __ASM("cp15:0:c7:c5:0");
+ __ICIALLU = 0;
+#endif
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new I cache state
+}
+
+/** \brief Clean D$ by MVA
+
+ DCCMVAC. Data cache clean by MVA to PoC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_dcache_mva(void *va) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c10, 1" : : "r" ((uint32_t)va));
+#else
+ register uint32_t __DCCMVAC __ASM("cp15:0:c7:c10:1");
+ __DCCMVAC = (uint32_t)va;
+#endif
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Invalidate D$ by MVA
+
+ DCIMVAC. Data cache invalidate by MVA to PoC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_dcache_mva(void *va) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c6, 1" : : "r" ((uint32_t)va));
+#else
+ register uint32_t __DCIMVAC __ASM("cp15:0:c7:c6:1");
+ __DCIMVAC = (uint32_t)va;
+#endif
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Clean and Invalidate D$ by MVA
+
+ DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+#if 1
+ __ASM volatile ("mcr p15, 0, %0, c7, c14, 1" : : "r" ((uint32_t)va));
+#else
+ register uint32_t __DCCIMVAC __ASM("cp15:0:c7:c14:1");
+ __DCCIMVAC = (uint32_t)va;
+#endif
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief
+ * Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency.
+ */
+
+/** \brief __v7_all_cache - helper function
+
+ */
+
+extern void __v7_all_cache(uint32_t op);
+
+
+/** \brief Invalidate the whole D$
+
+ DCISW. Invalidate by Set/Way
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_inv_dcache_all(void) {
+ __v7_all_cache(0);
+}
+
+/** \brief Clean the whole D$
+
+ DCCSW. Clean by Set/Way
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_dcache_all(void) {
+ __v7_all_cache(1);
+}
+
+/** \brief Clean and invalidate the whole D$
+
+ DCCISW. Clean and Invalidate by Set/Way
+ */
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __v7_clean_inv_dcache_all(void) {
+ __v7_all_cache(2);
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__TASKING__)) /*--------------- TASKING Compiler -----------------*/
+
+#error TASKING Compiler support not implemented for Cortex-A
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CAFUNC_H__ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_WIZwiki_W7500/core_caInstr.h Tue Jun 09 14:29:26 2015 +0100 @@ -0,0 +1,45 @@ +/**************************************************************************//** + * @file core_caInstr.h + * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File + * @version + * @date 04. December 2012 + * + * @note + * + ******************************************************************************/ +/* Copyright (c) 2009 - 2012 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + +#ifndef __CORE_CAINSTR_H__ +#define __CORE_CAINSTR_H__ + +#define __CORTEX_M 0x3 +#include "core_cmInstr.h" +#undef __CORTEX_M + +#endif +
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZwiki_W7500/core_ca_mmu.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,848 @@
+;/**************************************************************************//**
+; * @file core_ca_mmu.h
+; * @brief MMU Startup File for
+; * VE_A9_MP Device Series
+; * @version V1.01
+; * @date 25 March 2013
+; *
+; * @note
+; *
+; ******************************************************************************/
+;/* Copyright (c) 2012 ARM LIMITED
+;
+; All rights reserved.
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+; - Redistributions of source code must retain the above copyright
+; notice, this list of conditions and the following disclaimer.
+; - Redistributions in binary form must reproduce the above copyright
+; notice, this list of conditions and the following disclaimer in the
+; documentation and/or other materials provided with the distribution.
+; - Neither the name of ARM nor the names of its contributors may be used
+; to endorse or promote products derived from this software without
+; specific prior written permission.
+; *
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+; ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+; LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+; CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+; SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+; INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+; CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+; ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+; POSSIBILITY OF SUCH DAMAGE.
+; ---------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef _MMU_FUNC_H
+#define _MMU_FUNC_H
+
+#define SECTION_DESCRIPTOR (0x2)
+#define SECTION_MASK (0xFFFFFFFC)
+
+#define SECTION_TEXCB_MASK (0xFFFF8FF3)
+#define SECTION_B_SHIFT (2)
+#define SECTION_C_SHIFT (3)
+#define SECTION_TEX0_SHIFT (12)
+#define SECTION_TEX1_SHIFT (13)
+#define SECTION_TEX2_SHIFT (14)
+
+#define SECTION_XN_MASK (0xFFFFFFEF)
+#define SECTION_XN_SHIFT (4)
+
+#define SECTION_DOMAIN_MASK (0xFFFFFE1F)
+#define SECTION_DOMAIN_SHIFT (5)
+
+#define SECTION_P_MASK (0xFFFFFDFF)
+#define SECTION_P_SHIFT (9)
+
+#define SECTION_AP_MASK (0xFFFF73FF)
+#define SECTION_AP_SHIFT (10)
+#define SECTION_AP2_SHIFT (15)
+
+#define SECTION_S_MASK (0xFFFEFFFF)
+#define SECTION_S_SHIFT (16)
+
+#define SECTION_NG_MASK (0xFFFDFFFF)
+#define SECTION_NG_SHIFT (17)
+
+#define SECTION_NS_MASK (0xFFF7FFFF)
+#define SECTION_NS_SHIFT (19)
+
+
+#define PAGE_L1_DESCRIPTOR (0x1)
+#define PAGE_L1_MASK (0xFFFFFFFC)
+
+#define PAGE_L2_4K_DESC (0x2)
+#define PAGE_L2_4K_MASK (0xFFFFFFFD)
+
+#define PAGE_L2_64K_DESC (0x1)
+#define PAGE_L2_64K_MASK (0xFFFFFFFC)
+
+#define PAGE_4K_TEXCB_MASK (0xFFFFFE33)
+#define PAGE_4K_B_SHIFT (2)
+#define PAGE_4K_C_SHIFT (3)
+#define PAGE_4K_TEX0_SHIFT (6)
+#define PAGE_4K_TEX1_SHIFT (7)
+#define PAGE_4K_TEX2_SHIFT (8)
+
+#define PAGE_64K_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_64K_B_SHIFT (2)
+#define PAGE_64K_C_SHIFT (3)
+#define PAGE_64K_TEX0_SHIFT (12)
+#define PAGE_64K_TEX1_SHIFT (13)
+#define PAGE_64K_TEX2_SHIFT (14)
+
+#define PAGE_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_B_SHIFT (2)
+#define PAGE_C_SHIFT (3)
+#define PAGE_TEX_SHIFT (12)
+
+#define PAGE_XN_4K_MASK (0xFFFFFFFE)
+#define PAGE_XN_4K_SHIFT (0)
+#define PAGE_XN_64K_MASK (0xFFFF7FFF)
+#define PAGE_XN_64K_SHIFT (15)
+
+
+#define PAGE_DOMAIN_MASK (0xFFFFFE1F)
+#define PAGE_DOMAIN_SHIFT (5)
+
+#define PAGE_P_MASK (0xFFFFFDFF)
+#define PAGE_P_SHIFT (9)
+
+#define PAGE_AP_MASK (0xFFFFFDCF)
+#define PAGE_AP_SHIFT (4)
+#define PAGE_AP2_SHIFT (9)
+
+#define PAGE_S_MASK (0xFFFFFBFF)
+#define PAGE_S_SHIFT (10)
+
+#define PAGE_NG_MASK (0xFFFFF7FF)
+#define PAGE_NG_SHIFT (11)
+
+#define PAGE_NS_MASK (0xFFFFFFF7)
+#define PAGE_NS_SHIFT (3)
+
+#define OFFSET_1M (0x00100000)
+#define OFFSET_64K (0x00010000)
+#define OFFSET_4K (0x00001000)
+
+#define DESCRIPTOR_FAULT (0x00000000)
+
+/* ########################### MMU Function Access ########################### */
+/** \ingroup MMU_FunctionInterface
+ \defgroup MMU_Functions MMU Functions Interface
+ @{
+ */
+
+/* Attributes enumerations */
+
+/* Region size attributes */
+typedef enum
+{
+ SECTION,
+ PAGE_4k,
+ PAGE_64k,
+} mmu_region_size_Type;
+
+/* Region type attributes */
+typedef enum
+{
+ NORMAL,
+ DEVICE,
+ SHARED_DEVICE,
+ NON_SHARED_DEVICE,
+ STRONGLY_ORDERED
+} mmu_memory_Type;
+
+/* Region cacheability attributes */
+typedef enum
+{
+ NON_CACHEABLE,
+ WB_WA,
+ WT,
+ WB_NO_WA,
+} mmu_cacheability_Type;
+
+/* Region parity check attributes */
+typedef enum
+{
+ ECC_DISABLED,
+ ECC_ENABLED,
+} mmu_ecc_check_Type;
+
+/* Region execution attributes */
+typedef enum
+{
+ EXECUTE,
+ NON_EXECUTE,
+} mmu_execute_Type;
+
+/* Region global attributes */
+typedef enum
+{
+ GLOBAL,
+ NON_GLOBAL,
+} mmu_global_Type;
+
+/* Region shareability attributes */
+typedef enum
+{
+ NON_SHARED,
+ SHARED,
+} mmu_shared_Type;
+
+/* Region security attributes */
+typedef enum
+{
+ SECURE,
+ NON_SECURE,
+} mmu_secure_Type;
+
+/* Region access attributes */
+typedef enum
+{
+ NO_ACCESS,
+ RW,
+ READ,
+} mmu_access_Type;
+
+/* Memory Region definition */
+typedef struct RegionStruct {
+ mmu_region_size_Type rg_t;
+ mmu_memory_Type mem_t;
+ uint8_t domain;
+ mmu_cacheability_Type inner_norm_t;
+ mmu_cacheability_Type outer_norm_t;
+ mmu_ecc_check_Type e_t;
+ mmu_execute_Type xn_t;
+ mmu_global_Type g_t;
+ mmu_secure_Type sec_t;
+ mmu_access_Type priv_t;
+ mmu_access_Type user_t;
+ mmu_shared_Type sh_t;
+
+} mmu_region_attributes_Type;
+
+/** \brief Set section execution-never attribute
+
+ The function sets section execution-never attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] xn Section execution-never attribute : EXECUTE , NON_EXECUTE.
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_section(uint32_t *descriptor_l1, mmu_execute_Type xn)
+{
+ *descriptor_l1 &= SECTION_XN_MASK;
+ *descriptor_l1 |= ((xn & 0x1) << SECTION_XN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section domain
+
+ The function sets section domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Section domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_section(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= SECTION_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xF) << SECTION_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section parity check
+
+ The function sets section parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_section(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set section access privileges
+
+ The function sets section access privileges
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_section(uint32_t *descriptor_l1, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x6; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l1 &= SECTION_AP_MASK;
+ *descriptor_l1 |= (ap & 0x3) << SECTION_AP_SHIFT;
+ *descriptor_l1 |= ((ap & 0x4)>>2) << SECTION_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set section shareability
+
+ The function sets section shareability
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_section(uint32_t *descriptor_l1, mmu_shared_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_S_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Global attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] g_bit Section attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_section(uint32_t *descriptor_l1, mmu_global_Type g_bit)
+{
+ *descriptor_l1 &= SECTION_NG_MASK;
+ *descriptor_l1 |= ((g_bit & 0x1) << SECTION_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Security attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_section(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_NS_SHIFT);
+ return 0;
+}
+
+/* Page 4k or 64k */
+/** \brief Set 4k/64k page execution-never attribute
+
+ The function sets 4k/64k page execution-never attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] xn Page execution-never attribute : EXECUTE , NON_EXECUTE.
+ \param [in] page Page size: PAGE_4k, PAGE_64k,
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_page(uint32_t *descriptor_l2, mmu_execute_Type xn, mmu_region_size_Type page)
+{
+ if (page == PAGE_4k)
+ {
+ *descriptor_l2 &= PAGE_XN_4K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_4K_SHIFT);
+ }
+ else
+ {
+ *descriptor_l2 &= PAGE_XN_64K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_64K_SHIFT);
+ }
+ return 0;
+}
+
+/** \brief Set 4k/64k page domain
+
+ The function sets 4k/64k page domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Page domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_page(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= PAGE_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xf) << PAGE_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page parity check
+
+ The function sets 4k/64k page parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_page(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page access privileges
+
+ The function sets 4k/64k page access privileges
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_page(uint32_t *descriptor_l2, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x6; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l2 &= PAGE_AP_MASK;
+ *descriptor_l2 |= (ap & 0x3) << PAGE_AP_SHIFT;
+ *descriptor_l2 |= ((ap & 0x4)>>2) << PAGE_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page shareability
+
+ The function sets 4k/64k page shareability
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] s_bit 4k/64k page shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_page(uint32_t *descriptor_l2, mmu_shared_Type s_bit)
+{
+ *descriptor_l2 &= PAGE_S_MASK;
+ *descriptor_l2 |= ((s_bit & 0x1) << PAGE_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Global attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] g_bit 4k/64k page attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_page(uint32_t *descriptor_l2, mmu_global_Type g_bit)
+{
+ *descriptor_l2 &= PAGE_NG_MASK;
+ *descriptor_l2 |= ((g_bit & 0x1) << PAGE_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Security attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit 4k/64k page Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_page(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= PAGE_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << PAGE_NS_SHIFT);
+ return 0;
+}
+
+
+/** \brief Set Section memory attributes
+
+ The function sets section memory attributes
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] mem Section memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_section(uint32_t *descriptor_l1, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner)
+{
+ *descriptor_l1 &= SECTION_TEXCB_MASK;
+
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l1 |= 1 << SECTION_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT) | (1 << SECTION_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT) | (1 << SECTION_TEX0_SHIFT);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page memory attributes
+
+ The function sets 4k/64k page memory attributes
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] mem 4k/64k page memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_page(uint32_t *descriptor_l2, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner, mmu_region_size_Type page)
+{
+ *descriptor_l2 &= PAGE_4K_TEXCB_MASK;
+
+ if (page == PAGE_64k)
+ {
+ //same as section
+ __memory_section(descriptor_l2, mem, outer, inner);
+ }
+ else
+ {
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l2 |= 1 << PAGE_4K_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT) | (1 << PAGE_4K_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT) | (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Create a L1 section descriptor
+
+ The function creates a section descriptor.
+
+ Assumptions:
+ - 16MB super sections not suported
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg Section attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_section_descriptor(uint32_t *descriptor, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+
+ __memory_section(descriptor, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t);
+ __xn_section(descriptor,reg.xn_t);
+ __domain_section(descriptor, reg.domain);
+ __p_section(descriptor, reg.e_t);
+ __ap_section(descriptor, reg.priv_t, reg.user_t, 1);
+ __shared_section(descriptor,reg.sh_t);
+ __global_section(descriptor,reg.g_t);
+ __secure_section(descriptor,reg.sec_t);
+ *descriptor &= SECTION_MASK;
+ *descriptor |= SECTION_DESCRIPTOR;
+
+ return 0;
+
+}
+
+
+/** \brief Create a L1 and L2 4k/64k page descriptor
+
+ The function creates a 4k/64k page descriptor.
+ Assumptions:
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg 4k/64k page attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_page_descriptor(uint32_t *descriptor, uint32_t *descriptor2, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+ *descriptor2 = 0;
+
+ switch (reg.rg_t)
+ {
+ case PAGE_4k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_4k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_4k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_4K_MASK;
+ *descriptor2 |= PAGE_L2_4K_DESC;
+ break;
+
+ case PAGE_64k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_64k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_64k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_64K_MASK;
+ *descriptor2 |= PAGE_L2_64K_DESC;
+ break;
+
+ case SECTION:
+ //error
+ break;
+
+ }
+
+ return 0;
+
+}
+
+/** \brief Create a 1MB Section
+
+ \param [in] ttb Translation table base address
+ \param [in] base_address Section base address
+ \param [in] count Number of sections to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTSection(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1)
+{
+ uint32_t offset;
+ uint32_t entry;
+ uint32_t i;
+
+ offset = base_address >> 20;
+ entry = (base_address & 0xFFF00000) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb = ttb + offset;
+
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb++ = entry;
+ entry += OFFSET_1M;
+ }
+}
+
+/** \brief Create a 4k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 4k base address
+ \param [in] count Number of 4k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_4k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFFF000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_4K;
+ }
+}
+
+/** \brief Create a 64k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 64k base address
+ \param [in] count Number of 64k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_64k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i,j;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFF0000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //create 16 entries
+ for (j = 0; j < 16; j++)
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_64K;
+ }
+}
+
+/*@} end of MMU_Functions */
+#endif
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZwiki_W7500/core_cm0.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,682 @@
+/**************************************************************************//**
+ * @file core_cm0.h
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M0
+ @{
+ */
+
+/* CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZwiki_W7500/core_cm0plus.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,793 @@
+/**************************************************************************//**
+ * @file core_cm0plus.h
+ * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0PLUS_H_GENERIC
+#define __CORE_CM0PLUS_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex-M0+
+ @{
+ */
+
+/* CMSIS CM0P definitions */
+#define __CM0PLUS_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0PLUS_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16) | \
+ __CM0PLUS_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0PLUS_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0PLUS_H_DEPENDANT
+#define __CORE_CM0PLUS_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0PLUS_REV
+ #define __CM0PLUS_REV 0x0000
+ #warning "__CM0PLUS_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __VTOR_PRESENT
+ #define __VTOR_PRESENT 0
+ #warning "__VTOR_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex-M0+ */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+#if (__VTOR_PRESENT == 1)
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+#else
+ uint32_t RESERVED0;
+#endif
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if (__VTOR_PRESENT == 1)
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 8 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 8 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0+ Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0PLUS_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZwiki_W7500/core_cm3.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,1627 @@
+/**************************************************************************//**
+ * @file core_cm3.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM3_H_GENERIC
+#define __CORE_CM3_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M3
+ @{
+ */
+
+/* CMSIS CM3 definitions */
+#define __CM3_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | \
+ __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x03) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI__VFP_SUPPORT____
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM3_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM3_H_DEPENDANT
+#define __CORE_CM3_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM3_REV
+ #define __CM3_REV 0x0200
+ #warning "__CM3_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M3 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#if (__CM3_REV < 0x0201) /* core r2p1 */
+#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#else
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+#else
+ uint32_t RESERVED1[1];
+#endif
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM3_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZwiki_W7500/core_cm4.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,1772 @@
+/**************************************************************************//**
+ * @file core_cm4.h
+ * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_H_GENERIC
+#define __CORE_CM4_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M4
+ @{
+ */
+
+/* CMSIS CM4 definitions */
+#define __CM4_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM4_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16) | \
+ __CM4_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x04) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+#include <core_cm4_simd.h> /* Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CM4_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM4_H_DEPENDANT
+#define __CORE_CM4_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM4_REV
+ #define __CM4_REV 0x0000
+ #warning "__CM4_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 0
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M4 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ - Core FPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISOOFP_Pos 9 /*!< ACTLR: DISOOFP Position */
+#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */
+
+#define SCnSCB_ACTLR_DISFPCA_Pos 8 /*!< ACTLR: DISFPCA Position */
+#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_FPU Floating Point Unit (FPU)
+ \brief Type definitions for the Floating Point Unit (FPU)
+ @{
+ */
+
+/** \brief Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __IO uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
+ __IO uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
+ __IO uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
+ __I uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
+ __I uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register */
+#define FPU_FPCCR_ASPEN_Pos 31 /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos 30 /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos 8 /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos 6 /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos 5 /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos 4 /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos 3 /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos 1 /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos 0 /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk (1UL << FPU_FPCCR_LSPACT_Pos) /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register */
+#define FPU_FPCAR_ADDRESS_Pos 3 /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register */
+#define FPU_FPDSCR_AHP_Pos 26 /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos 25 /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos 24 /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos 22 /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 */
+#define FPU_MVFR0_FP_rounding_modes_Pos 28 /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos 24 /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos 20 /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos 16 /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos 12 /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos 8 /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos 4 /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos 0 /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL << FPU_MVFR0_A_SIMD_registers_Pos) /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 */
+#define FPU_MVFR1_FP_fused_MAC_Pos 28 /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos 24 /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos 4 /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos 0 /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk (0xFUL << FPU_MVFR1_FtZ_mode_Pos) /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+#if (__FPU_PRESENT == 1)
+ #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
+ #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+/* NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); enable interrupt */
+ NVIC->ISER[(uint32_t)((int32_t)IRQn) >> 5] = (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM4_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZwiki_W7500/core_cm4_simd.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,673 @@
+/**************************************************************************//**
+ * @file core_cm4_simd.h
+ * @brief CMSIS Cortex-M4 SIMD Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_SIMD_H
+#define __CORE_CM4_SIMD_H
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ ******************************************************************************/
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#define __SADD8 __sadd8
+#define __QADD8 __qadd8
+#define __SHADD8 __shadd8
+#define __UADD8 __uadd8
+#define __UQADD8 __uqadd8
+#define __UHADD8 __uhadd8
+#define __SSUB8 __ssub8
+#define __QSUB8 __qsub8
+#define __SHSUB8 __shsub8
+#define __USUB8 __usub8
+#define __UQSUB8 __uqsub8
+#define __UHSUB8 __uhsub8
+#define __SADD16 __sadd16
+#define __QADD16 __qadd16
+#define __SHADD16 __shadd16
+#define __UADD16 __uadd16
+#define __UQADD16 __uqadd16
+#define __UHADD16 __uhadd16
+#define __SSUB16 __ssub16
+#define __QSUB16 __qsub16
+#define __SHSUB16 __shsub16
+#define __USUB16 __usub16
+#define __UQSUB16 __uqsub16
+#define __UHSUB16 __uhsub16
+#define __SASX __sasx
+#define __QASX __qasx
+#define __SHASX __shasx
+#define __UASX __uasx
+#define __UQASX __uqasx
+#define __UHASX __uhasx
+#define __SSAX __ssax
+#define __QSAX __qsax
+#define __SHSAX __shsax
+#define __USAX __usax
+#define __UQSAX __uqsax
+#define __UHSAX __uhsax
+#define __USAD8 __usad8
+#define __USADA8 __usada8
+#define __SSAT16 __ssat16
+#define __USAT16 __usat16
+#define __UXTB16 __uxtb16
+#define __UXTAB16 __uxtab16
+#define __SXTB16 __sxtb16
+#define __SXTAB16 __sxtab16
+#define __SMUAD __smuad
+#define __SMUADX __smuadx
+#define __SMLAD __smlad
+#define __SMLADX __smladx
+#define __SMLALD __smlald
+#define __SMLALDX __smlaldx
+#define __SMUSD __smusd
+#define __SMUSDX __smusdx
+#define __SMLSD __smlsd
+#define __SMLSDX __smlsdx
+#define __SMLSLD __smlsld
+#define __SMLSLDX __smlsldx
+#define __SEL __sel
+#define __QADD __qadd
+#define __QSUB __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
+ ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
+
+#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
+ ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
+
+#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+ ((int64_t)(ARG3) << 32) ) >> 32))
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_iar.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_ccs.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLALD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLALDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLSLD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLSLDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ if (ARG3 == 0) \
+ __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
+ else \
+ __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+/* not yet supported */
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CORE_CM4_SIMD_H */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZwiki_W7500/core_cmFunc.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,636 @@
+/**************************************************************************//**
+ * @file core_cmFunc.h
+ * @brief CMSIS Cortex-M Core Function Access Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ register uint32_t __regIPSR __ASM("ipsr");
+ return(__regIPSR);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ register uint32_t __regXPSR __ASM("xpsr");
+ return(__regXPSR);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ return(__regProcessStackPointer);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ __regProcessStackPointer = topOfProcStack;
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ return(__regMainStackPointer);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ __regMainStackPointer = topOfMainStack;
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0xff);
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/** \brief Enable IRQ Interrupts
+
+ This function enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ uint32_t result;
+
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all instrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CMFUNC_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZwiki_W7500/core_cmInstr.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,688 @@
+/**************************************************************************//**
+ * @file core_cmInstr.h
+ * @brief CMSIS Cortex-M Core Instruction Access Header File
+ * @version V3.20
+ * @date 05. March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __nop
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+#define __WFI __wfi
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __wfe
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __sev
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+#define __ISB() __isb(0xF)
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() __dsb(0xF)
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() __dmb(0xF)
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __rev
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+ rev16 r0, r0
+ bx lr
+}
+#endif
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+ revsh r0, r0
+ bx lr
+}
+#endif
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+#define __ROR __ror
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __breakpoint(value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __RBIT __rbit
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXB(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXH(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXW(value, ptr) __strex(value, ptr)
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+#define __CLREX __clrex
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT __ssat
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __usat
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __clz
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constrant "l"
+ * Otherwise, use general registers, specified by constrant "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __NOP(void)
+{
+ __ASM volatile ("nop");
+}
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFI(void)
+{
+ __ASM volatile ("wfi");
+}
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFE(void)
+{
+ __ASM volatile ("wfe");
+}
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __SEV(void)
+{
+ __ASM volatile ("sev");
+}
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ISB(void)
+{
+ __ASM volatile ("isb");
+}
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DSB(void)
+{
+ __ASM volatile ("dsb");
+}
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void)
+{
+ __ASM volatile ("dmb");
+}
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+ return __builtin_bswap32(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ return (short)__builtin_bswap16(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32 - op2));
+}
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void)
+{
+ __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIZwiki_W7500/system_W7500x.h Tue Jun 09 14:29:26 2015 +0100
@@ -0,0 +1,84 @@
+/**************************************************************************//**
+ * @file system_W7500x.h
+ * @brief CMSIS Cortex-M# Device Peripheral Access Layer Header File for
+ * Device W7500x
+ * @version V3.10
+ * @date 23. November 2012
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef SYSTEM_W7500x_H /* ToDo: replace '<Device>' with your device name */
+#define SYSTEM_W7500x_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "W7500x.h"
+
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+extern uint32_t GetSystemClock(void); /*!< Get System Clock Frequency */
+
+
+/**
+ * Initialize the system
+ *
+ * @param none
+ * @return none
+ *
+ * @brief Setup the microcontroller system.
+ * Initialize the System and update the SystemCoreClock variable.
+ */
+extern void SystemInit (void);
+
+/**
+ * Update SystemCoreClock variable
+ *
+ * @param none
+ * @return none
+ *
+ * @brief Updates the SystemCoreClock with current core Clock
+ * retrieved from cpu registers.
+ */
+extern void SystemCoreClockUpdate (void);
+
+/*----------------------------------------------------------------------------
+ Define clocks
+ *----------------------------------------------------------------------------*/
+#define EXTERN_XTAL (8000000UL) /* External Oscillator Frequency */
+#define INTERN_XTAL (8000000UL) /* Internal Oscillator Frequency */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* SYSTEM_W7500x_H */
Binary file TARGET_XADOW_M0/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_ARM_MICRO/system_LPC11Uxx.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_ARM_STD/system_LPC11Uxx.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_GCC_CR/libmbed.a has changed
--- a/mbed.h Wed May 27 08:07:35 2015 +0100 +++ b/mbed.h Tue Jun 09 14:29:26 2015 +0100 @@ -16,7 +16,7 @@ #ifndef MBED_H #define MBED_H -#define MBED_LIBRARY_VERSION 100 +#define MBED_LIBRARY_VERSION 101 #include "platform.h"