Ricardo Benitez
meh
Fork of
mbed
by 
mbed official
TARGET_NUCLEO_F030R8/stm32f0xx_hal_adc_ex.h
- Committer:
- Kojto
- Date:
- 2015-10-02
- Revision:
- 108:34e6b704fe68
- Parent:
- 93:e188a91d3eaa
File content as of revision 108:34e6b704fe68:
/**
******************************************************************************
* @file stm32f0xx_hal_adc_ex.h
* @author MCD Application Team
* @version V1.3.0
* @date 26-June-2015
* @brief Header file of ADC HAL Extension module.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0xx_HAL_ADC_EX_H
#define __STM32F0xx_HAL_ADC_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
/** @addtogroup STM32F0xx_HAL_Driver
* @{
*/
/** @addtogroup ADCEx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup ADC_Exported_Constants ADC Exported Constants
* @{
*/
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define ADC_CCR_ALL (ADC_CCR_VBATEN | ADC_CCR_TSEN | ADC_CCR_VREFEN)
#else
#define ADC_CCR_ALL (ADC_CCR_TSEN | ADC_CCR_VREFEN)
#endif
/** @defgroup ADC_External_trigger_source_Regular ADC External trigger source Regular
* @{
*/
/* List of external triggers with generic trigger name, sorted by trigger */
/* name: */
/* External triggers of regular group for ADC1 */
#define ADC_EXTERNALTRIGCONV_T1_TRGO ADC1_2_EXTERNALTRIG_T1_TRGO
#define ADC_EXTERNALTRIGCONV_T1_CC4 ADC1_2_EXTERNALTRIG_T1_CC4
#define ADC_EXTERNALTRIGCONV_T3_TRGO ADC1_2_EXTERNALTRIG_T3_TRGO
#define ADC_SOFTWARE_START (ADC_CFGR1_EXTSEL + (uint32_t)1)
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define ADC_EXTERNALTRIGCONV_T2_TRGO ADC1_2_EXTERNALTRIG_T2_TRGO
#endif
#if !defined(STM32F030x6) && !defined(STM32F070x6) && !defined(STM32F042x6)
#define ADC_EXTERNALTRIGCONV_T15_TRGO ADC1_2_EXTERNALTRIG_T15_TRGO
#endif
/**
* @}
*/
/** @defgroup ADC_channels ADC channels
* @{
*/
/* Note: Depending on devices, some channels may not be available on package */
/* pins. Refer to device datasheet for channels availability. */
/* Note: Channels are used by bitfields for setting of channel selection */
/* (register ADC_CHSELR) and used by number for setting of analog */
/* watchdog channel (bits AWDCH in register ADC_CFGR1). */
/* Channels are defined with decimal numbers and converted them to */
/* bitfields when needed. */
#define ADC_CHANNEL_0 ((uint32_t) 0x00000000)
#define ADC_CHANNEL_1 ((uint32_t) 0x00000001)
#define ADC_CHANNEL_2 ((uint32_t) 0x00000002)
#define ADC_CHANNEL_3 ((uint32_t) 0x00000003)
#define ADC_CHANNEL_4 ((uint32_t) 0x00000004)
#define ADC_CHANNEL_5 ((uint32_t) 0x00000005)
#define ADC_CHANNEL_6 ((uint32_t) 0x00000006)
#define ADC_CHANNEL_7 ((uint32_t) 0x00000007)
#define ADC_CHANNEL_8 ((uint32_t) 0x00000008)
#define ADC_CHANNEL_9 ((uint32_t) 0x00000009)
#define ADC_CHANNEL_10 ((uint32_t) 0x0000000A)
#define ADC_CHANNEL_11 ((uint32_t) 0x0000000B)
#define ADC_CHANNEL_12 ((uint32_t) 0x0000000C)
#define ADC_CHANNEL_13 ((uint32_t) 0x0000000D)
#define ADC_CHANNEL_14 ((uint32_t) 0x0000000E)
#define ADC_CHANNEL_15 ((uint32_t) 0x0000000F)
#define ADC_CHANNEL_16 ((uint32_t) 0x00000010)
#define ADC_CHANNEL_17 ((uint32_t) 0x00000011)
#define ADC_CHANNEL_TEMPSENSOR ADC_CHANNEL_16
#define ADC_CHANNEL_VREFINT ADC_CHANNEL_17
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define ADC_CHANNEL_18 ((uint32_t) 0x00000012)
#define ADC_CHANNEL_VBAT ADC_CHANNEL_18
#endif
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup ADCEx_Private_Macros ADCEx Private Macros
* @{
*/
/* Macro reserved for internal HAL driver usage, not intended to be used in */
/* code of final user. */
/**
* @brief Test if the selected ADC channel is an internal channel
* VrefInt/TempSensor/Vbat
* Note: On STM32F0, availability of internal channel Vbat depends on
* devices lines.
* @param __CHANNEL__: ADC channel
* @retval None
*/
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define ADC_IS_CHANNEL_INTERNAL(__CHANNEL__) \
(((__CHANNEL__) == ADC_CHANNEL_TEMPSENSOR) || \
((__CHANNEL__) == ADC_CHANNEL_VREFINT) || \
((__CHANNEL__) == ADC_CHANNEL_VBAT) \
)
#else
#define ADC_IS_CHANNEL_INTERNAL(__CHANNEL__) \
(((__CHANNEL__) == ADC_CHANNEL_TEMPSENSOR) || \
((__CHANNEL__) == ADC_CHANNEL_VREFINT) \
)
#endif
/**
* @brief Select the internal measurement path to be enabled/disabled
* corresponding to the selected ADC internal channel
* VrefInt/TempSensor/Vbat.
* Note: On STM32F0, availability of internal channel Vbat depends on
* devices lines.
* @param __CHANNEL__: ADC channel
* @retval Bit of register ADC_CCR
*/
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define ADC_CHANNEL_INTERNAL_PATH(__CHANNEL__) \
(( (__CHANNEL__) == ADC_CHANNEL_TEMPSENSOR \
)? \
(ADC_CCR_TSEN) \
: \
( \
( (__CHANNEL__) == ADC_CHANNEL_VREFINT \
)? \
(ADC_CCR_VREFEN) \
: \
(ADC_CCR_VBATEN) \
) \
)
#else
#define ADC_CHANNEL_INTERNAL_PATH(__CHANNEL__) \
(( (__CHANNEL__) == ADC_CHANNEL_TEMPSENSOR \
)? \
(ADC_CCR_TSEN) \
: \
(ADC_CHANNEL_VREFINT) \
)
#endif
#if defined (STM32F030x6) || defined (STM32F070x6)
#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO) || \
((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC4) || \
((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
((REGTRIG) == ADC_SOFTWARE_START))
#elif defined (STM32F042x6)
#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO) || \
((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC4) || \
((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \
((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
((REGTRIG) == ADC_SOFTWARE_START))
#elif defined (STM32F030xC) || defined (STM32F070xB) || defined (STM32F030x8)
#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO) || \
((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC4) || \
((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
((REGTRIG) == ADC_EXTERNALTRIGCONV_T15_TRGO) || \
((REGTRIG) == ADC_SOFTWARE_START))
#else
#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO) || \
((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC4) || \
((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \
((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
((REGTRIG) == ADC_EXTERNALTRIGCONV_T15_TRGO) || \
((REGTRIG) == ADC_SOFTWARE_START))
#endif
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_CHANNEL_0) || \
((CHANNEL) == ADC_CHANNEL_1) || \
((CHANNEL) == ADC_CHANNEL_2) || \
((CHANNEL) == ADC_CHANNEL_3) || \
((CHANNEL) == ADC_CHANNEL_4) || \
((CHANNEL) == ADC_CHANNEL_5) || \
((CHANNEL) == ADC_CHANNEL_6) || \
((CHANNEL) == ADC_CHANNEL_7) || \
((CHANNEL) == ADC_CHANNEL_8) || \
((CHANNEL) == ADC_CHANNEL_9) || \
((CHANNEL) == ADC_CHANNEL_10) || \
((CHANNEL) == ADC_CHANNEL_11) || \
((CHANNEL) == ADC_CHANNEL_12) || \
((CHANNEL) == ADC_CHANNEL_13) || \
((CHANNEL) == ADC_CHANNEL_14) || \
((CHANNEL) == ADC_CHANNEL_15) || \
((CHANNEL) == ADC_CHANNEL_TEMPSENSOR) || \
((CHANNEL) == ADC_CHANNEL_VREFINT) || \
((CHANNEL) == ADC_CHANNEL_VBAT) )
#else
#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_CHANNEL_0) || \
((CHANNEL) == ADC_CHANNEL_1) || \
((CHANNEL) == ADC_CHANNEL_2) || \
((CHANNEL) == ADC_CHANNEL_3) || \
((CHANNEL) == ADC_CHANNEL_4) || \
((CHANNEL) == ADC_CHANNEL_5) || \
((CHANNEL) == ADC_CHANNEL_6) || \
((CHANNEL) == ADC_CHANNEL_7) || \
((CHANNEL) == ADC_CHANNEL_8) || \
((CHANNEL) == ADC_CHANNEL_9) || \
((CHANNEL) == ADC_CHANNEL_10) || \
((CHANNEL) == ADC_CHANNEL_11) || \
((CHANNEL) == ADC_CHANNEL_12) || \
((CHANNEL) == ADC_CHANNEL_13) || \
((CHANNEL) == ADC_CHANNEL_14) || \
((CHANNEL) == ADC_CHANNEL_15) || \
((CHANNEL) == ADC_CHANNEL_TEMPSENSOR) || \
((CHANNEL) == ADC_CHANNEL_VREFINT) )
#endif
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup ADCEx_Exported_Functions
* @{
*/
/* IO operation functions *****************************************************/
/** @addtogroup ADCEx_Exported_Functions_Group1
* @{
*/
/* ADC calibration */
HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef* hadc);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F0xx_HAL_ADC_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/