Diff: FXOS8700CQ.cpp

Revision:

5:7bdb0d5e5287

Parent:

3:2ce85aa45d7d

diff -r e2fe752b881e -r 7bdb0d5e5287 FXOS8700CQ.cpp
--- a/FXOS8700CQ.cpp	Tue Jun 03 19:02:19 2014 +0000
+++ b/FXOS8700CQ.cpp	Sun Jan 10 17:45:05 2016 +0000
@@ -30,20 +30,26 @@
         FXOS8700CQ_CTRL_REG2_SMODS2(3) | // 0b11 gives low power sleep oversampling mode
         FXOS8700CQ_CTRL_REG2_MODS2(1); // 0b01 gives low noise, low power oversampling mode
 
+//MPL  - don't configure interrupts here.
+/*
     // No configuration changes from default 0x00 in CTRL_REG3
     // Interrupts will be active low, their outputs in push-pull mode
     data[3] = 0x00;
 
+
     // FXOS8700CQ_CTRL_REG4;
-    data[4] =
+    data[4] = 
         FXOS8700CQ_CTRL_REG4_INT_EN_DRDY; // Enable the Data-Ready interrupt
 
     // No configuration changes from default 0x00 in CTRL_REG5
     // Data-Ready interrupt will appear on INT2
     data[5] = 0x00;
 
-    // Write to the 5 CTRL_REG registers
-    write_regs(data, 6);
+    // Write to the 4 CTRL_REG registers
+
+   write_regs(data, 6);
+*/
+    write_regs(data, 3);
 
     // FXOS8700CQ_XYZ_DATA_CFG
     data[0] = FXOS8700CQ_XYZ_DATA_CFG;
@@ -69,6 +75,7 @@
     // Write to the 3 M_CTRL_REG registers
     write_regs(data, 4);
 
+
     // Peripheral is configured, but disabled
     enabled = false;
 }
@@ -88,6 +95,73 @@
     enabled = true;
 }
 
+//MPL
+uint8_t FXOS8700CQ::config_int( void)
+{
+        
+   /*don't enable interrupts in constructor.  Do that here. */
+ 
+   /* todo: pass in a structure and have this function enable the interrupts you want, set the pin you want them to come out on, and set whether active high or low */
+ 
+    uint8_t data[2];
+     
+   //external interrupt signal is active low & push-pull by default (bit value 0).
+    data[0] = FXOS8700CQ_CTRL_REG3;
+    data[1] = 0x08;   //enable freefall/motion detection interrupt to wake sensor from sleep mode   
+    write_regs(data, 2);
+   
+    data[0] = FXOS8700CQ_CTRL_REG4;   
+    data[1] = 0x04;   //enable freefall/motion detection interrupt
+    write_regs(data, 2);
+
+    //by default it comes out on INT2
+     //INT2 connected to PTD1 on FRDM-KL26Z
+    data[0] = FXOS8700CQ_CTRL_REG5;   
+    data[1] = 0x00;   //interrupts come out on INT2
+    write_regs(data, 2);
+
+    //todo: what is the correct return value for okay?
+    return 99;
+}
+
+//MPL 
+void FXOS8700CQ::clear_int( void)
+{
+    /* todo: pass in a structure and have this function clear the interrupts you want */
+   
+   //this is only for the freefall / motion detection
+   
+    uint8_t data[2];
+
+    read_regs(FXOS8700CQ_INT_SOURCE, &data[1], 1);  // need to clear this because we had selected to latch the interrupt
+    //printf("INT_SOURCE = %x\n",data[1]);
+    
+    read_regs(FXOS8700CQ_A_FFMT_SRC, &data[1], 1);  //clear the motion interrupt because we enabled it
+    //printf("A_FFMT_SRC = %x\n",data[1]);
+    
+}
+
+//MPL
+uint8_t FXOS8700CQ::config_feature( void)
+{
+  //dont enable specific features (tap detection, motion detection, etc) in constructor - do that here
+//todo: should this be in a separate function that allows users to select what capabilities to enable?
+
+//MPL - enable motion detection 
+
+   uint8_t data[2];
+   
+    data[0] = FXOS8700CQ_A_FFMT_CFG;
+    data[1] = 0x78;    //(don't latch event in register.)  bit6: 1 motion flag.  bits5,4,3: 1 enable detection in all 3 accel axis
+    write_regs(data, 2);
+    
+    data[0] = FXOS8700CQ_A_FFMT_THS;
+    data[1] = 0x07;  //will this work??   //do I need to enable the debounce filter?
+    write_regs(data, 2);
+
+    return 0; // not implemented return yet
+
+}
 void FXOS8700CQ::disable(void)
 {
     uint8_t data[2];