File content as of revision 0:1bf8f02b0770:

/*********************************************************************
*                SEGGER Microcontroller GmbH & Co. KG                *
*        Solutions for real time microcontroller applications        *
**********************************************************************
*                                                                    *
*        (c) 1996 - 2014  SEGGER Microcontroller GmbH & Co. KG       *
*                                                                    *
*        Internet: www.segger.com    Support:  support@segger.com    *
*                                                                    *
**********************************************************************

** emWin V5.24 - Graphical user interface for embedded applications **
All  Intellectual Property rights  in the Software belongs to  SEGGER.
emWin is protected by  international copyright laws.  Knowledge of the
source code may not be used to write a similar product.  This file may
only be used in accordance with the following terms:

The software has been licensed to  NXP Semiconductors USA, Inc.  whose
registered  office  is  situated  at 411 E. Plumeria Drive, San  Jose,
CA 95134, USA  solely for  the  purposes  of  creating  libraries  for
NXPs M0, M3/M4 and  ARM7/9 processor-based  devices,  sublicensed  and
distributed under the terms and conditions of the NXP End User License
Agreement.
Full source code is available at: www.segger.com

We appreciate your understanding and fairness.
----------------------------------------------------------------------
File        : GUI_ConfDefaults.h
Purpose     : Defaults for GUI config switches.
---------------------------END-OF-HEADER------------------------------

Attention : Do not modify this file ! If you do, you will not
            be able do update to a later GUI version !

*/

#ifndef  GUI_CONFDEFAULTS_H
#define  GUI_CONFDEFAULTS_H

#include "GUIConf.h"

#ifndef   LCD_MAX_LOG_COLORS
  #define LCD_MAX_LOG_COLORS 256
#else
  #if (LCD_MAX_LOG_COLORS > 256)
    #error The value of LCD_MAX_LOG_COLORS must be <= 256!
  #endif
#endif

#define LCD_PIXELINDEX U32

#ifndef LCD_YMAG
  #define LCD_YMAG 1
#endif
#ifndef LCD_XMAG
  #define LCD_XMAG 1
#endif

/**********************************************************************
*
*       Defaults for config switches
*
***********************************************************************
*/

/* Define "universal pointer". Normally, this is not needed (define will expand to nothing)
   However, on some systems (AVR - IAR compiler) it can be necessary ( -> __generic),
   since a default pointer can access RAM only, not the built-in Flash
*/
#ifndef GUI_UNI_PTR
  #define GUI_UNI_PTR /* Remains only for compatibility purpose, no longer used in emWin */
#endif

/* Define const storage. Normally, this is not needed (define will expand to const)
   However, on some systems (AVR - IAR compiler) it can be necessary ( -> __flash const),
   since otherwise constants are copied into RAM
*/
#ifndef GUI_CONST_STORAGE
  #define GUI_CONST_STORAGE const
#endif

#ifndef GUI_USE_MEMDEV_1BPP_FOR_SCREEN
  #define GUI_USE_MEMDEV_1BPP_FOR_SCREEN 1
#endif

#ifndef GUI_BIDI_MAX_CHARS_PER_LINE
  #define GUI_BIDI_MAX_CHARS_PER_LINE 80
#endif

#ifndef GUI_SUPPORT_TOUCH
  #define GUI_SUPPORT_TOUCH   0
#endif

#ifndef GUI_SUPPORT_MOUSE
  #define GUI_SUPPORT_MOUSE   0
#endif

#ifndef GUI_SUPPORT_MEMDEV
  #define GUI_SUPPORT_MEMDEV  0
#endif

#ifndef GUI_OS
  #define GUI_OS              0
#endif

#ifndef GUI_NUM_LAYERS
  #define GUI_NUM_LAYERS      1
#endif

#ifndef GUI_SUPPORT_CURSOR
  #define GUI_SUPPORT_CURSOR  (GUI_SUPPORT_MOUSE | GUI_SUPPORT_TOUCH)
#endif

#ifndef   GUI_CURSOR_LAYER
  #define GUI_CURSOR_LAYER 0
#endif

#ifndef GUI_MEMCPY
  #define GUI_MEMCPY(pDest, pSrc, NumBytes) memcpy(pDest, pSrc, NumBytes)
#endif

#ifndef GUI_SUPPORT_ROTATION
  #define GUI_SUPPORT_ROTATION 1
#endif

/* In order to avoid warnings for undefined parameters */
#ifndef GUI_USE_PARA
  #if defined (__BORLANDC__) || defined(NC30) || defined(NC308)
    #define GUI_USE_PARA(para)
  #else
    #define GUI_USE_PARA(para) (void)para
  #endif
#endif

/* Default for types */
#ifndef GUI_TIMER_TIME
  #define GUI_TIMER_TIME int  /* default is to use 16 bits for 16 bit CPUs,
	                           32 bits on 32 bit CPUs for timing */
#endif

/* Types used for memory allocation */
#define GUI_ALLOC_DATATYPE   I32
#define GUI_ALLOC_DATATYPE_U U32

#ifndef   GUI_MAX_XBF_BYTES
  #define GUI_MAX_XBF_BYTES 200
#endif

#ifndef   GUI_MEMSET
  #define GUI_MEMSET GUI__memset
#endif


#endif   /* ifdef GUI_CONFDEFAULTS_H */

/*************************** End of file ****************************/