Diff: targets/TARGET_Maxim/TARGET_MAX32625/mxc/gpio.h

Revision:

150:02e0a0aed4ec

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_Maxim/TARGET_MAX32625/mxc/gpio.h	Tue Nov 08 17:45:16 2016 +0000
@@ -0,0 +1,315 @@
+/**
+ * @file    gpio.h
+ * @brief   General-Purpose Input/Output (GPIO) function prototypes and data types.
+ */
+
+/* ****************************************************************************
+ * Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *
+ * $Date: 2016-08-15 20:04:11 -0500 (Mon, 15 Aug 2016) $
+ * $Revision: 24085 $
+ *
+ *************************************************************************** */
+
+/* Define to prevent redundant inclusion */
+#ifndef _GPIO_H_
+#define _GPIO_H_
+
+/* **** Includes **** */
+#include "mxc_config.h"
+#include "gpio_regs.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// Doxy group definition for this peripheral module
+/**
+ * @defgroup gpio General-Purpose Input/Output (GPIO)
+ * @ingroup periphlibs
+ * @{
+ */
+
+/* **** Definitions **** */
+/**
+ * @defgroup gpio_port_pin Port and Pin Definitions
+ * @ingroup gpio
+ * @{
+ * @defgroup gpio_port Port Definitions
+ * @ingroup gpio_port_pin
+ * @{
+ */
+#define PORT_0      (0)             /**< Port 0  Define*/
+#define PORT_1      (1)             /**< Port 1  Define*/
+#define PORT_2      (2)             /**< Port 2  Define*/
+#define PORT_3      (3)             /**< Port 3  Define*/
+#define PORT_4      (4)             /**< Port 4  Define*/
+#define PORT_5      (5)             /**< Port 5  Define*/
+#define PORT_6      (6)             /**< Port 6  Define*/
+#define PORT_7      (7)             /**< Port 7  Define*/
+#define PORT_8      (8)             /**< Port 8  Define*/
+#define PORT_9      (9)             /**< Port 9  Define*/
+#define PORT_10     (10)            /**< Port 10  Define*/
+#define PORT_11     (11)            /**< Port 11  Define*/
+#define PORT_12     (12)            /**< Port 12  Define*/
+#define PORT_13     (13)            /**< Port 13  Define*/
+#define PORT_14     (14)            /**< Port 14  Define*/
+#define PORT_15     (15)            /**< Port 15  Define*/
+/**@} end of gpio_port group*/
+/**
+ * @defgroup gpio_pin Pin Definitions
+ * @ingroup gpio_port_pin
+ * @{
+ */
+#define PIN_0       (1 << 0)        /**< Pin 0 Define */
+#define PIN_1       (1 << 1)        /**< Pin 1 Define */
+#define PIN_2       (1 << 2)        /**< Pin 2 Define */
+#define PIN_3       (1 << 3)        /**< Pin 3 Define */
+#define PIN_4       (1 << 4)        /**< Pin 4 Define */
+#define PIN_5       (1 << 5)        /**< Pin 5 Define */
+#define PIN_6       (1 << 6)        /**< Pin 6 Define */
+#define PIN_7       (1 << 7)        /**< Pin 7 Define */
+/**@} end of gpio_pin group */
+/**@} end of gpio_port_pin group */
+
+/**
+ * Enumeration type for the GPIO Function Type
+ */
+typedef enum {
+    GPIO_FUNC_GPIO  = MXC_V_GPIO_FUNC_SEL_MODE_GPIO,    /**< GPIO Function Selection */
+    GPIO_FUNC_PT    = MXC_V_GPIO_FUNC_SEL_MODE_PT,      /**< Pulse Train Function Selection */
+    GPIO_FUNC_TMR   = MXC_V_GPIO_FUNC_SEL_MODE_TMR      /**< Timer Function Selection */
+}
+gpio_func_t;
+
+/**
+ * Enumeration type for the type of GPIO pad on a given pin.
+ */
+typedef enum {
+    GPIO_PAD_INPUT_PULLUP           = MXC_V_GPIO_OUT_MODE_HIGH_Z_WEAK_PULLUP,       /**< Set pad to high impedance, weak pull-up */
+    GPIO_PAD_OPEN_DRAIN             = MXC_V_GPIO_OUT_MODE_OPEN_DRAIN,               /**< Set pad to open-drain with high impedance with input buffer */
+    GPIO_PAD_OPEN_DRAIN_PULLUP      = MXC_V_GPIO_OUT_MODE_OPEN_DRAIN_WEAK_PULLUP,   /**< Set pad to open-drain with weak pull-up */
+    GPIO_PAD_INPUT                  = MXC_V_GPIO_OUT_MODE_NORMAL_HIGH_Z,            /**< Set pad to high impednace, input buffer enabled */
+    GPIO_PAD_NORMAL                 = MXC_V_GPIO_OUT_MODE_NORMAL,                   /**< Set pad to normal drive mode for high an low output */
+    GPIO_PAD_SLOW                   = MXC_V_GPIO_OUT_MODE_SLOW_DRIVE,               /**< Set pad to slow drive mode, which is normal mode with negative feedback to slow edge transitions */
+    GPIO_PAD_FAST                   = MXC_V_GPIO_OUT_MODE_FAST_DRIVE,               /**< Set pad to fash drive mode, which is normal mode with a transistor drive to drive fast high and low */
+    GPIO_PAD_INPUT_PULLDOWN         = MXC_V_GPIO_OUT_MODE_HIGH_Z_WEAK_PULLDOWN,     /**< Set pad to weak pulldown mode */
+    GPIO_PAD_OPEN_SOURCE            = MXC_V_GPIO_OUT_MODE_OPEN_SOURCE,              /**< Set pad to open source mode, transistor drive to high */
+    GPIO_PAD_OPEN_SOURCE_PULLDOWN   = MXC_V_GPIO_OUT_MODE_OPEN_SOURCE_WEAK_PULLDOWN /**< Set pad to open source with weak pulldown mode, transistor drive to high, weak pulldown to GND for low */
+} gpio_pad_t;
+
+/**
+ * Structure type for configuring a GPIO port.
+ */
+typedef struct {
+    uint32_t port;      /// Index of GPIO port
+    uint32_t mask;      /// Pin mask. Multiple bits can be set.
+    gpio_func_t func;   /// Function type
+    gpio_pad_t pad;     /// Pad type
+} gpio_cfg_t;
+
+/**
+ * Enumeration type for the interrupt type on a GPIO port.
+ */
+typedef enum {
+    GPIO_INT_DISABLE        = MXC_V_GPIO_INT_MODE_DISABLE,          /**< Disable interrupts */
+    GPIO_INT_FALLING_EDGE   = MXC_V_GPIO_INT_MODE_FALLING_EDGE,     /**< Interrupt on Falling Edge */
+    GPIO_INT_RISING_EDGE    = MXC_V_GPIO_INT_MODE_RISING_EDGE,      /**< Interrupt on Rising Edge */
+    GPIO_INT_ANY_EDGE       = MXC_V_GPIO_INT_MODE_ANY_EDGE,         /**< Interrupt on Falling or Rising Edge */
+    GPIO_INT_LOW_LEVEL      = MXC_V_GPIO_INT_MODE_LOW_LVL,          /**< Interrupt on a low level input detection */
+    GPIO_INT_HIGH_LEVEL     = MXC_V_GPIO_INT_MODE_HIGH_LVL          /**< Interrupt on a high level input detection */
+} gpio_int_mode_t;
+
+/* **** Function Prototypes **** */
+
+/**
+ * @brief      Configure GPIO pin(s).
+ * @param      cfg   Pointer to configuration structure describing the pin.
+ *
+ * @return     #E_NO_ERROR if everything is successful.
+ *
+ */
+int GPIO_Config(const gpio_cfg_t *cfg);
+
+/**
+ * @brief      Gets the pin(s) input state.
+ * @param      cfg   Pointer to configuration structure describing the pin.
+ *
+ * @return     The requested pin state.
+ *
+ */
+__STATIC_INLINE uint32_t GPIO_InGet(const gpio_cfg_t *cfg)
+{
+    return (MXC_GPIO->in_val[cfg->port] & cfg->mask);
+}
+
+/**
+ * @brief      Sets the pin(s) to a high level output.
+ * @param      cfg   Pointer to configuration structure describing the pin.
+ *
+ */
+__STATIC_INLINE void GPIO_OutSet(const gpio_cfg_t *cfg)
+{
+    MXC_GPIO->out_val[cfg->port] |= cfg->mask;
+}
+
+/**
+ * @brief      Clears the pin(s) to a low level output.
+ * @param      cfg   Pointer to configuration structure describing the pin.
+ *
+ */
+__STATIC_INLINE void GPIO_OutClr(const gpio_cfg_t *cfg)
+{
+    MXC_GPIO->out_val[cfg->port] &= ~(cfg->mask);
+}
+
+/**
+ * @brief      Gets the pin(s) output state.
+ * @param      cfg   Pointer to configuration structure describing the pin.
+ *
+ * @return     The state of the requested pin.
+ *
+ */
+__STATIC_INLINE uint32_t GPIO_OutGet(const gpio_cfg_t *cfg)
+{
+    return (MXC_GPIO->out_val[cfg->port] & cfg->mask);
+}
+
+/**
+ * @brief      Write the pin(s) to a desired output level.
+ * @param      cfg   Pointer to configuration structure describing the pin.
+ * @param      val   Desired output level of the pin(s). This will be masked
+ *                   with the configuration mask.
+ *
+ */
+__STATIC_INLINE void GPIO_OutPut(const gpio_cfg_t *cfg, uint32_t val)
+{
+    MXC_GPIO->out_val[cfg->port] = (MXC_GPIO->out_val[cfg->port] & ~cfg->mask) | (val & cfg->mask);
+}
+
+/**
+ * @brief      Toggles the the pin(s) output level.
+ * @param      cfg   Pointer to configuration structure describing the pin.
+ *
+ */
+__STATIC_INLINE void GPIO_OutToggle(const gpio_cfg_t *cfg)
+{
+    MXC_GPIO->out_val[cfg->port] ^= cfg->mask;
+}
+
+/**
+ * @brief      Configure GPIO interrupt(s)
+ * @param      cfg   Pointer to configuration structure describing the pin.
+ * @param      mode  Requested interrupt mode.
+ *
+ */
+void GPIO_IntConfig(const gpio_cfg_t *cfg, gpio_int_mode_t mode);
+
+/**
+ * @brief      Enables the specified GPIO interrupt
+ * @param      cfg   Pointer to configuration structure describing the pin.
+ *
+ */
+__STATIC_INLINE void GPIO_IntEnable(const gpio_cfg_t *cfg)
+{
+    MXC_GPIO->inten[cfg->port] |= cfg->mask;
+}
+
+/**
+ * @brief      Disables the specified GPIO interrupt.
+ * @param      cfg   Pointer to configuration structure describing the pin.
+ *
+ */
+__STATIC_INLINE void GPIO_IntDisable(const gpio_cfg_t *cfg)
+{
+    MXC_GPIO->inten[cfg->port] &= ~cfg->mask;
+}
+
+/**
+ * @brief      Gets the interrupt(s) status on a GPIO pin.
+ * @param      cfg   Pointer to configuration structure describing the pin
+ *                   for which the status is being requested.
+ *
+ * @return     The requested interrupt status.
+ *
+ */
+__STATIC_INLINE uint32_t GPIO_IntStatus(const gpio_cfg_t *cfg)
+{
+    return (MXC_GPIO->intfl[cfg->port] & cfg->mask);
+}
+
+/**
+ * @brief      Clears the interrupt(s) status on a GPIO pin.
+ * @param      cfg   Pointer to configuration structure describing the pin
+ *                   to clear the interrupt state of.
+ *
+ */
+__STATIC_INLINE void GPIO_IntClr(const gpio_cfg_t *cfg)
+{
+    MXC_GPIO->intfl[cfg->port] = cfg->mask;
+}
+
+/**
+ * @brief      Type alias for a GPIO callback function with prototype:
+ * @code
+ *      void callback_fn(void *cbdata);
+ * @endcode
+ * @param      cbdata  A void pointer to the data type as registered when
+ *                     @c GPIO_RegisterCallback() was called.
+ *
+ */
+typedef void (*gpio_callback_fn)(void *cbdata);
+
+/**
+ * @brief      Registers a callback for the interrupt on a given port and pin.
+ * @param      cfg       Pointer to configuration structure describing the pin
+ * @param      callback  A pointer to a function of type #callback_fn.
+ * @param      cbdata    The parameter to be passed to the callback function, #callback_fn, when an interrupt occurs.
+ *
+ */
+void GPIO_RegisterCallback(const gpio_cfg_t *cfg, gpio_callback_fn callback, void *cbdata);
+
+/**
+ * @brief      GPIO IRQ Handler. @note If a callback is registered for a given
+ *             interrupt, the callback function will be called.
+ *
+ * @param      port number of the port that generated the interrupt service routine.
+ *
+ */
+void GPIO_Handler(unsigned int port);
+
+/**@} end of group gpio */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _GPIO_H_ */