File content as of revision 6:2fb5057c0e42:

// ----------------------------------------------------------------------------
// Copyright 2016-2018 ARM Ltd.
//
// SPDX-License-Identifier: Apache-2.0
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
// ----------------------------------------------------------------------------
#ifndef MBED_TEST_MODE

#include "mbed.h"
#include "simple-mbed-cloud-client.h"
#include "FATFileSystem.h"
#include "LittleFileSystem.h"

// Default network interface object. Don't forget to change the WiFi SSID/password in mbed_app.json if you're using WiFi.
NetworkInterface *net = NetworkInterface::get_default_instance();

// Default block device available on the target board
BlockDevice *bd = BlockDevice::get_default_instance();

#if COMPONENT_SD || COMPONENT_NUSD
// Use FATFileSystem for SD card type blockdevices
FATFileSystem fs("fs", bd);
#else
// Use LittleFileSystem for non-SD block devices to enable wear leveling and other functions
LittleFileSystem fs("fs", bd);
#endif

#if USE_BUTTON == 1
InterruptIn button(BUTTON1);
#endif /* USE_BUTTON */

// Default LED to use for PUT/POST example
DigitalOut led(LED1);

// Declaring pointers for access to Pelion Device Management Client resources outside of main()
MbedCloudClientResource *button_res;
MbedCloudClientResource *led_res;
MbedCloudClientResource *post_res;

// An event queue is a very useful structure to debounce information between contexts (e.g. ISR and normal threads)
// This is great because things such as network operations are illegal in ISR, so updating a resource in a button's fall() function is not allowed
EventQueue eventQueue;

/**
 * PUT handler - sets the value of the built-in LED
 * @param resource The resource that triggered the callback
 * @param newValue Updated value for the resource
 */
void put_callback(MbedCloudClientResource *resource, m2m::String newValue) {
    printf("PUT received. New value: %s\n", newValue.c_str());
    led = atoi(newValue.c_str());
}

/**
 * POST handler - prints the content of the payload
 * @param resource The resource that triggered the callback
 * @param buffer If a body was passed to the POST function, this contains the data.
 *               Note that the buffer is deallocated after leaving this function, so copy it if you need it longer.
 * @param size Size of the body
 */
void post_callback(MbedCloudClientResource *resource, const uint8_t *buffer, uint16_t size) {
    printf("POST received (length %u). Payload: ", size);
    for (size_t ix = 0; ix < size; ix++) {
        printf("%02x ", buffer[ix]);
    }
    printf("\n");
}

/**
 * Button handler
 * This function will be triggered either by a physical button press or by a ticker every 5 seconds (see below)
 */
void button_press() {
    int v = button_res->get_value_int() + 1;
    button_res->set_value(v);
    printf("Button clicked %d times\n", v);
}

/**
 * Notification callback handler
 * @param resource The resource that triggered the callback
 * @param status The delivery status of the notification
 */
void button_callback(MbedCloudClientResource *resource, const NoticationDeliveryStatus status) {
    printf("Button notification, status %s (%d)\n", MbedCloudClientResource::delivery_status_to_string(status), status);
}

/**
 * Registration callback handler
 * @param endpoint Information about the registered endpoint such as the name (so you can find it back in portal)
 */
void registered(const ConnectorClientEndpointInfo *endpoint) {
    printf("Registered to Pelion Device Management. Endpoint Name: %s\n", endpoint->internal_endpoint_name.c_str());
}

int main(void) {
    printf("\nStarting Simple Pelion Device Management Client example\n");

#if USE_BUTTON == 1
    // If the User button is pressed ons start, then format storage.
    if (button.read() == MBED_CONF_APP_BUTTON_PRESSED_STATE) {
        printf("User button is pushed on start. Formatting the storage...\n");
        int storage_status = StorageHelper::format(&fs, bd);
        if (storage_status != 0) {
            printf("ERROR: Failed to reformat the storage (%d).\n", storage_status);
        }
    } else {
        printf("You can hold the user button during boot to format the storage and change the device identity.\n");
    }
#endif /* USE_BUTTON */

    // Connect to the Internet (DHCP is expected to be on)
    printf("Connecting to the network using the default network interface...\n");
    net = NetworkInterface::get_default_instance();

    nsapi_error_t net_status = NSAPI_ERROR_NO_CONNECTION;
    while ((net_status = net->connect()) != NSAPI_ERROR_OK) {
        printf("Unable to connect to network (%d). Retrying...\n", net_status);
    }

    printf("Connected to the network successfully. IP address: %s\n", net->get_ip_address());

    printf("Initializing Pelion Device Management Client...\n");

    // SimpleMbedCloudClient handles registering over LwM2M to Pelion Device Management
    SimpleMbedCloudClient client(net, bd, &fs);
    int client_status = client.init();
    if (client_status != 0) {
        printf("Pelion Client initialization failed (%d)\n", client_status);
        return -1;
    }

    // Creating resources, which can be written or read from the cloud
    button_res = client.create_resource("3200/0/5501", "button_count");
    button_res->set_value(0);
    button_res->methods(M2MMethod::GET);
    button_res->observable(true);
    button_res->attach_notification_callback(button_callback);

    led_res = client.create_resource("3201/0/5853", "led_state");
    led_res->set_value(led.read());
    led_res->methods(M2MMethod::GET | M2MMethod::PUT);
    led_res->attach_put_callback(put_callback);

    post_res = client.create_resource("3300/0/5605", "execute_function");
    post_res->methods(M2MMethod::POST);
    post_res->attach_post_callback(post_callback);

    printf("Initialized Pelion Device Management Client. Registering...\n");

    // Callback that fires when registering is complete
    client.on_registered(&registered);

    // Register with Pelion DM
    client.register_and_connect();

#if USE_BUTTON == 1
    // The button fires on an interrupt context, but debounces it to the eventqueue, so it's safe to do network operations
    button.fall(eventQueue.event(&button_press));
    printf("Press the user button to increment the LwM2M resource value...\n");
#else
    // The timer fires on an interrupt context, but debounces it to the eventqueue, so it's safe to do network operations
    Ticker timer;
    timer.attach(eventQueue.event(&button_press), 5.0);
    printf("Simulating button press every 5 seconds...\n");
#endif /* USE_BUTTON */

    // You can easily run the eventQueue in a separate thread if required
    eventQueue.dispatch_forever();
}

#endif /* MBED_TEST_MODE */