aapje monkey
Bike service
Fork of
BLE_API
by 
Bluetooth Low Energy
Diff: ble/GapAdvertisingData.h
- Revision:
- 1132:692ddf04fc42
- Parent:
- 1105:178ed0b132c4
- Child:
- 1136:22aada733dbd
--- a/ble/GapAdvertisingData.h Tue Jan 12 19:47:52 2016 +0000
+++ b/ble/GapAdvertisingData.h Wed Apr 06 19:13:46 2016 +0100
@@ -1,498 +1,482 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef __GAP_ADVERTISING_DATA_H__
-#define __GAP_ADVERTISING_DATA_H__
-
-#include <stdint.h>
-#include <string.h>
-
-#include "blecommon.h"
-
-#define GAP_ADVERTISING_DATA_MAX_PAYLOAD (31)
-
-/**************************************************************************/
-/*!
- \brief
- This class provides several helper functions to generate properly
- formatted GAP Advertising and Scan Response data payloads.
-
- \note
- See Bluetooth Specification 4.0 (Vol. 3), Part C, Sections 11 and 18
- for further information on Advertising and Scan Response data.
-
- \par Advertising and Scan Response Payloads
- Advertising data and Scan Response data are organized around a set of
- data types called 'AD types' in Bluetooth 4.0 (see the Bluetooth Core
- Specification v4.0, Vol. 3, Part C, Sections 11 and 18).
-
- \par
- Each AD type has its own standardized assigned number, as defined
- by the Bluetooth SIG:
- https://www.bluetooth.org/en-us/specification/assigned-numbers/generic-access-profile
-
- \par
- For convenience, all appropriate AD types are encapsulated
- in GapAdvertisingData::DataType.
-
- \par
- Before the AD Types and their payload (if any) can be inserted into
- the Advertising or Scan Response frames, they need to be formatted as
- follows:
-
- \li \c Record length (1 byte).
- \li \c AD Type (1 byte).
- \li \c AD payload (optional; only present if record length > 1).
-
- \par
- This class takes care of properly formatting the payload, performs
- some basic checks on the payload length, and tries to avoid common
- errors like adding an exclusive AD field twice in the Advertising
- or Scan Response payload.
-
- \par EXAMPLE
-
- \code
-
- // ToDo
-
- \endcode
-*/
-/**************************************************************************/
-class GapAdvertisingData
-{
-public:
- /**********************************************************************/
- /*!
- \brief
- A list of Advertising Data types commonly used by peripherals.
- These AD types are used to describe the capabilities of the
- peripheral, and are inserted inside the advertising or scan
- response payloads.
-
- \par Source
- \li \c Bluetooth Core Specification 4.0 (Vol. 3), Part C, Section 11, 18
- \li \c https://www.bluetooth.org/en-us/specification/assigned-numbers/generic-access-profile
- */
- /**********************************************************************/
- enum DataType_t {
- FLAGS = 0x01, /**< \ref *Flags */
- INCOMPLETE_LIST_16BIT_SERVICE_IDS = 0x02, /**< Incomplete list of 16-bit Service IDs */
- COMPLETE_LIST_16BIT_SERVICE_IDS = 0x03, /**< Complete list of 16-bit Service IDs */
- INCOMPLETE_LIST_32BIT_SERVICE_IDS = 0x04, /**< Incomplete list of 32-bit Service IDs (not relevant for Bluetooth 4.0) */
- COMPLETE_LIST_32BIT_SERVICE_IDS = 0x05, /**< Complete list of 32-bit Service IDs (not relevant for Bluetooth 4.0) */
- INCOMPLETE_LIST_128BIT_SERVICE_IDS = 0x06, /**< Incomplete list of 128-bit Service IDs */
- COMPLETE_LIST_128BIT_SERVICE_IDS = 0x07, /**< Complete list of 128-bit Service IDs */
- SHORTENED_LOCAL_NAME = 0x08, /**< Shortened Local Name */
- COMPLETE_LOCAL_NAME = 0x09, /**< Complete Local Name */
- TX_POWER_LEVEL = 0x0A, /**< TX Power Level (in dBm) */
- DEVICE_ID = 0x10, /**< Device ID */
- SLAVE_CONNECTION_INTERVAL_RANGE = 0x12, /**< Slave Connection Interval Range */
- LIST_128BIT_SOLICITATION_IDS = 0x15, /**< List of 128 bit service UUIDs the device is looking for */
- SERVICE_DATA = 0x16, /**< Service Data */
- APPEARANCE = 0x19, /**< \ref Appearance */
- ADVERTISING_INTERVAL = 0x1A, /**< Advertising Interval */
- MANUFACTURER_SPECIFIC_DATA = 0xFF /**< Manufacturer Specific Data */
- };
- typedef enum DataType_t DataType; /* Deprecated type alias. This may be dropped in a future release. */
-
- /**********************************************************************/
- /*!
- \brief
- A list of values for the FLAGS AD Type.
-
- \note
- You can use more than one value in the FLAGS AD Type (ex.
- LE_GENERAL_DISCOVERABLE and BREDR_NOT_SUPPORTED).
-
- \par Source
- \li \c Bluetooth Core Specification 4.0 (Vol. 3), Part C, Section 18.1
- */
- /**********************************************************************/
- enum Flags_t {
- LE_LIMITED_DISCOVERABLE = 0x01, /**< *Peripheral device is discoverable for a limited period of time. */
- LE_GENERAL_DISCOVERABLE = 0x02, /**< Peripheral device is discoverable at any moment. */
- BREDR_NOT_SUPPORTED = 0x04, /**< Peripheral device is LE only. */
- SIMULTANEOUS_LE_BREDR_C = 0x08, /**< Not relevant - central mode only. */
- SIMULTANEOUS_LE_BREDR_H = 0x10 /**< Not relevant - central mode only. */
- };
- typedef enum Flags_t Flags; /* Deprecated type alias. This may be dropped in a future release. */
-
- /**********************************************************************/
- /*!
- \brief
- A list of values for the APPEARANCE AD Type, which describes the
- physical shape or appearance of the device.
-
- \par Source
- \li \c Bluetooth Core Specification Supplement, Part A, Section 1.12
- \li \c Bluetooth Core Specification 4.0 (Vol. 3), Part C, Section 12.2
- \li \c https://developer.bluetooth.org/gatt/characteristics/Pages/CharacteristicViewer.aspx?u=org.bluetooth.characteristic.gap.appearance.xml
- */
- /**********************************************************************/
- enum Appearance_t {
- UNKNOWN = 0, /**< Unknown or unspecified appearance type. */
- GENERIC_PHONE = 64, /**< Generic Phone. */
- GENERIC_COMPUTER = 128, /**< Generic Computer. */
- GENERIC_WATCH = 192, /**< Generic Watch. */
- WATCH_SPORTS_WATCH = 193, /**< Sports Watch. */
- GENERIC_CLOCK = 256, /**< Generic Clock. */
- GENERIC_DISPLAY = 320, /**< Generic Display. */
- GENERIC_REMOTE_CONTROL = 384, /**< Generic Remote Control. */
- GENERIC_EYE_GLASSES = 448, /**< Generic Eye Glasses. */
- GENERIC_TAG = 512, /**< Generic Tag. */
- GENERIC_KEYRING = 576, /**< Generic Keyring. */
- GENERIC_MEDIA_PLAYER = 640, /**< Generic Media Player. */
- GENERIC_BARCODE_SCANNER = 704, /**< Generic Barcode Scanner. */
- GENERIC_THERMOMETER = 768, /**< Generic Thermometer. */
- THERMOMETER_EAR = 769, /**< Ear Thermometer. */
- GENERIC_HEART_RATE_SENSOR = 832, /**< Generic Heart Rate Sensor. */
- HEART_RATE_SENSOR_HEART_RATE_BELT = 833, /**< Belt Heart Rate Sensor. */
- GENERIC_BLOOD_PRESSURE = 896, /**< Generic Blood Pressure. */
- BLOOD_PRESSURE_ARM = 897, /**< Arm Blood Pressure. */
- BLOOD_PRESSURE_WRIST = 898, /**< Wrist Blood Pressure. */
- HUMAN_INTERFACE_DEVICE_HID = 960, /**< Human Interface Device (HID). */
- KEYBOARD = 961, /**< Keyboard. */
- MOUSE = 962, /**< Mouse. */
- JOYSTICK = 963, /**< Joystick. */
- GAMEPAD = 964, /**< Gamepad. */
- DIGITIZER_TABLET = 965, /**< Digitizer Tablet. */
- CARD_READER = 966, /**< Card Reader. */
- DIGITAL_PEN = 967, /**< Digital Pen. */
- BARCODE_SCANNER = 968, /**< Barcode Scanner. */
- GENERIC_GLUCOSE_METER = 1024, /**< Generic Glucose Meter. */
- GENERIC_RUNNING_WALKING_SENSOR = 1088, /**< Generic Running/Walking Sensor. */
- RUNNING_WALKING_SENSOR_IN_SHOE = 1089, /**< In Shoe Running/Walking Sensor. */
- RUNNING_WALKING_SENSOR_ON_SHOE = 1090, /**< On Shoe Running/Walking Sensor. */
- RUNNING_WALKING_SENSOR_ON_HIP = 1091, /**< On Hip Running/Walking Sensor. */
- GENERIC_CYCLING = 1152, /**< Generic Cycling. */
- CYCLING_CYCLING_COMPUTER = 1153, /**< Cycling Computer. */
- CYCLING_SPEED_SENSOR = 1154, /**< Cycling Speed Sensor. */
- CYCLING_CADENCE_SENSOR = 1155, /**< Cycling Cadence Sensor. */
- CYCLING_POWER_SENSOR = 1156, /**< Cycling Power Sensor. */
- CYCLING_SPEED_AND_CADENCE_SENSOR = 1157, /**< Cycling Speed and Cadence Sensor. */
- PULSE_OXIMETER_GENERIC = 3136, /**< Generic Pulse Oximeter. */
- PULSE_OXIMETER_FINGERTIP = 3137, /**< Fingertip Pulse Oximeter. */
- PULSE_OXIMETER_WRIST_WORN = 3138, /**< Wrist Worn Pulse Oximeter. */
- GENERIC_WEIGHT_SCALE = 3200, /**< Generic Weight Scale. */
- OUTDOOR_GENERIC = 5184, /**< Generic Outdoor. */
- OUTDOOR_LOCATION_DISPLAY_DEVICE = 5185, /**< Outdoor Location Display Device. */
- OUTDOOR_LOCATION_AND_NAVIGATION_DISPLAY_DEVICE = 5186, /**< Outdoor Location and Navigation Display Device. */
- OUTDOOR_LOCATION_POD = 5187, /**< Outdoor Location Pod. */
- OUTDOOR_LOCATION_AND_NAVIGATION_POD = 5188 /**< Outdoor Location and Navigation Pod. */
- };
- typedef enum Appearance_t Appearance; /* Deprecated type alias. This may be dropped in a future release. */
-
- GapAdvertisingData(void) : _payload(), _payloadLen(0), _appearance(GENERIC_TAG) {
- /* empty */
- }
-
- /**
- * Adds advertising data based on the specified AD type (see DataType).
- * If the supplied AD type is already present in the advertising
- * payload, then the value is updated.
- *
- * @param[in] advDataType The Advertising 'DataType' to add.
- * @param[in] payload Pointer to the payload contents.
- * @param[in] len Size of the payload in bytes.
- *
- * @return BLE_ERROR_BUFFER_OVERFLOW if the new value causes the
- * advertising buffer to overflow. BLE_ERROR_NONE is returned
- * on success.
- *
- * @note When the specified AD type is INCOMPLETE_LIST_16BIT_SERVICE_IDS,
- * COMPLETE_LIST_16BIT_SERVICE_IDS, INCOMPLETE_LIST_32BIT_SERVICE_IDS,
- * COMPLETE_LIST_32BIT_SERVICE_IDS, INCOMPLETE_LIST_128BIT_SERVICE_IDS,
- * COMPLETE_LIST_128BIT_SERVICE_IDS or LIST_128BIT_SOLICITATION_IDS the
- * supplied value is appended to the values previously added to the
- * payload.
- */
- ble_error_t addData(DataType_t advDataType, const uint8_t *payload, uint8_t len)
- {
- // find field
- uint8_t* field = findField(advDataType);
-
- if (field) {
- // Field type already exist, either add to field or replace
- return addField(advDataType, payload, len, field);
- } else {
- // field doesn't exists, insert new
- return appendField(advDataType, payload, len);
- }
- }
-
- /**
- * Update a particular ADV field in the advertising payload (based on
- * matching type).
- *
- * @param[in] advDataType The Advertising 'DataType' to add.
- * @param[in] payload Pointer to the payload contents.
- * @param[in] len Size of the payload in bytes.
- *
- * @return BLE_ERROR_UNSPECIFIED if the specified field is not found,
- * BLE_ERROR_BUFFER_OVERFLOW if the new value causes the
- * advertising buffer to overflow. BLE_ERROR_NONE is returned
- * on success.
- */
- ble_error_t updateData(DataType_t advDataType, const uint8_t *payload, uint8_t len)
- {
- // find field
- uint8_t* field = findField(advDataType);
-
- if (field) {
- // Field type already exist, replace field contents
- return updateField(advDataType, payload, len, field);
- } else {
- // field doesn't exists, return an error
- return BLE_ERROR_UNSPECIFIED;
- }
- }
-
- /**
- * Helper function to add APPEARANCE data to the advertising payload.
- *
- * @param appearance
- * The APPEARANCE value to add.
- *
- * @return BLE_ERROR_BUFFER_OVERFLOW if the specified data would cause the
- * advertising buffer to overflow, else BLE_ERROR_NONE.
- */
- ble_error_t addAppearance(Appearance appearance = GENERIC_TAG) {
- _appearance = appearance;
- return addData(GapAdvertisingData::APPEARANCE, (uint8_t *)&appearance, 2);
- }
-
- /**
- * Helper function to add FLAGS data to the advertising payload.
- * @param flags
- * LE_LIMITED_DISCOVERABLE
- * The peripheral is discoverable for a limited period of time.
- * LE_GENERAL_DISCOVERABLE
- * The peripheral is permanently discoverable.
- * BREDR_NOT_SUPPORTED
- * This peripheral is a Bluetooth Low Energy only device (no EDR support).
- *
- * @return BLE_ERROR_BUFFER_OVERFLOW if the specified data would cause the
- * advertising buffer to overflow, else BLE_ERROR_NONE.
- */
- ble_error_t addFlags(uint8_t flags = LE_GENERAL_DISCOVERABLE) {
- return addData(GapAdvertisingData::FLAGS, &flags, 1);
- }
-
- /**
- * Helper function to add TX_POWER_LEVEL data to the advertising payload.
- *
- * @return BLE_ERROR_BUFFER_OVERFLOW if the specified data would cause the
- * advertising buffer to overflow, else BLE_ERROR_NONE.
- */
- ble_error_t addTxPower(int8_t txPower) {
- /* To Do: Basic error checking to make sure txPower is in range. */
- return addData(GapAdvertisingData::TX_POWER_LEVEL, (uint8_t *)&txPower, 1);
- }
-
- /**
- * Clears the payload and resets the payload length counter.
- */
- void clear(void) {
- memset(&_payload, 0, GAP_ADVERTISING_DATA_MAX_PAYLOAD);
- _payloadLen = 0;
- }
-
- /**
- * Returns a pointer to the current payload.
- */
- const uint8_t *getPayload(void) const {
- return _payload;
- }
-
- /**
- * Returns the current payload length (0..31 bytes).
- */
- uint8_t getPayloadLen(void) const {
- return _payloadLen;
- }
-
- /**
- * Returns the 16-bit appearance value for this device.
- */
- uint16_t getAppearance(void) const {
- return (uint16_t)_appearance;
- }
-
- /**
- * Search advertisement data for field.
- * Returns pointer to the first element in the field if found, NULL otherwise.
- * Where the first element is the length of the field.
- */
- const uint8_t* findField(DataType_t type) const {
- return findField(type);
- }
-
-private:
- /**
- * Append advertising data based on the specified AD type (see DataType)
- */
- ble_error_t appendField(DataType advDataType, const uint8_t *payload, uint8_t len)
- {
- /* Make sure we don't exceed the 31 byte payload limit */
- if (_payloadLen + len + 2 > GAP_ADVERTISING_DATA_MAX_PAYLOAD) {
- return BLE_ERROR_BUFFER_OVERFLOW;
- }
-
- /* Field length. */
- memset(&_payload[_payloadLen], len + 1, 1);
- _payloadLen++;
-
- /* Field ID. */
- memset(&_payload[_payloadLen], (uint8_t)advDataType, 1);
- _payloadLen++;
-
- /* Payload. */
- memcpy(&_payload[_payloadLen], payload, len);
- _payloadLen += len;
-
- return BLE_ERROR_NONE;
- }
-
- /**
- * Search advertisement data for field.
- * Returns pointer to the first element in the field if found, NULL otherwise.
- * Where the first element is the length of the field.
- */
- uint8_t* findField(DataType_t type) {
- // scan through advertisement data
- for (uint8_t idx = 0; idx < _payloadLen; ) {
- uint8_t fieldType = _payload[idx + 1];
-
- if (fieldType == type) {
- return &_payload[idx];
- }
-
- // advance to next field
- idx += _payload[idx] + 1;
- }
-
- // field not found
- return NULL;
- }
-
- /**
- * Given the a pointer to a field in the advertising payload it replaces
- * the existing data in the field with the supplied data.
- *
- * When the specified AD type is INCOMPLETE_LIST_16BIT_SERVICE_IDS,
- * COMPLETE_LIST_16BIT_SERVICE_IDS, INCOMPLETE_LIST_32BIT_SERVICE_IDS,
- * COMPLETE_LIST_32BIT_SERVICE_IDS, INCOMPLETE_LIST_128BIT_SERVICE_IDS,
- * COMPLETE_LIST_128BIT_SERVICE_IDS or LIST_128BIT_SOLICITATION_IDS the
- * supplied value is appended to the values previously added to the
- * payload.
- *
- * Returns BLE_ERROR_NONE on success.
- */
- ble_error_t addField(DataType_t advDataType, const uint8_t *payload, uint8_t len, uint8_t* field)
- {
- ble_error_t result = BLE_ERROR_BUFFER_OVERFLOW;
-
- switch(advDataType) {
- // These fields will have the new data appended if there is sufficient space
- case INCOMPLETE_LIST_16BIT_SERVICE_IDS:
- case COMPLETE_LIST_16BIT_SERVICE_IDS:
- case INCOMPLETE_LIST_32BIT_SERVICE_IDS:
- case COMPLETE_LIST_32BIT_SERVICE_IDS:
- case INCOMPLETE_LIST_128BIT_SERVICE_IDS:
- case COMPLETE_LIST_128BIT_SERVICE_IDS:
- case LIST_128BIT_SOLICITATION_IDS: {
- // check if data fits
- if ((_payloadLen + len) <= GAP_ADVERTISING_DATA_MAX_PAYLOAD) {
- // make room for new field by moving the remainder of the
- // advertisement payload "to the right" starting after the
- // TYPE field.
- uint8_t* end = &_payload[_payloadLen];
-
- while (&field[1] < end) {
- end[len] = *end;
- end--;
- }
-
- // insert new data
- for (uint8_t idx = 0; idx < len; idx++) {
- field[2 + idx] = payload[idx];
- }
-
- // increment lengths
- field[0] += len;
- _payloadLen += len;
-
- result = BLE_ERROR_NONE;
- }
-
- break;
- }
- // These fields will be overwritten with the new value
- default: {
- result = updateField(advDataType, payload, len, field);
-
- break;
- }
- }
-
- return result;
- }
-
- /**
- * Given the a pointer to a field in the advertising payload it replaces
- * the existing data in the field with the supplied data.
- * Returns BLE_ERROR_NONE on success.
- */
- ble_error_t updateField(DataType_t advDataType, const uint8_t *payload, uint8_t len, uint8_t* field)
- {
- ble_error_t result = BLE_ERROR_BUFFER_OVERFLOW;
- uint8_t dataLength = field[0] - 1;
-
- // new data has same length, do in-order replacement
- if (len == dataLength) {
- for (uint8_t idx = 0; idx < dataLength; idx++) {
- field[2 + idx] = payload[idx];
- }
-
- result = BLE_ERROR_NONE;
- } else {
- // check if data fits
- if ((_payloadLen - dataLength + len) <= GAP_ADVERTISING_DATA_MAX_PAYLOAD) {
-
- // remove old field
- while ((field + dataLength + 2) < &_payload[_payloadLen]) {
- *field = field[dataLength + 2];
- field++;
- }
-
- // reduce length
- _payloadLen -= dataLength + 2;
-
- // add new field
- result = appendField(advDataType, payload, len);
- }
- }
-
- return result;
- }
-
- uint8_t _payload[GAP_ADVERTISING_DATA_MAX_PAYLOAD];
- uint8_t _payloadLen;
- uint16_t _appearance;
-};
-
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __GAP_ADVERTISING_DATA_H__
+#define __GAP_ADVERTISING_DATA_H__
+
+#include <stdint.h>
+#include <string.h>
+
+#include "blecommon.h"
+
+#define GAP_ADVERTISING_DATA_MAX_PAYLOAD (31)
+
+/**************************************************************************/
+/*!
+ \brief
+ This class provides several helper functions to generate properly
+ formatted GAP Advertising and Scan Response data payloads.
+
+ \note
+ See Bluetooth Specification 4.0 (Vol. 3), Part C, Sections 11 and 18
+ for further information on Advertising and Scan Response data.
+
+ \par Advertising and Scan Response Payloads
+ Advertising data and Scan Response data are organized around a set of
+ data types called 'AD types' in Bluetooth 4.0 (see the Bluetooth Core
+ Specification v4.0, Vol. 3, Part C, Sections 11 and 18).
+
+ \par
+ Each AD type has its own standardized assigned number, as defined
+ by the Bluetooth SIG:
+ https://www.bluetooth.org/en-us/specification/assigned-numbers/generic-access-profile
+
+ \par
+ For convenience, all appropriate AD types are encapsulated
+ in GapAdvertisingData::DataType.
+
+ \par
+ Before the AD Types and their payload (if any) can be inserted into
+ the Advertising or Scan Response frames, they need to be formatted as
+ follows:
+
+ \li \c Record length (1 byte).
+ \li \c AD Type (1 byte).
+ \li \c AD payload (optional; only present if record length > 1).
+
+ \par
+ This class takes care of properly formatting the payload, performs
+ some basic checks on the payload length, and tries to avoid common
+ errors like adding an exclusive AD field twice in the Advertising
+ or Scan Response payload.
+
+ \par EXAMPLE
+
+ \code
+
+ // ToDo
+
+ \endcode
+*/
+/**************************************************************************/
+class GapAdvertisingData
+{
+public:
+ /**********************************************************************/
+ /*!
+ \brief
+ A list of Advertising Data types commonly used by peripherals.
+ These AD types are used to describe the capabilities of the
+ peripheral, and are inserted inside the advertising or scan
+ response payloads.
+
+ \par Source
+ \li \c Bluetooth Core Specification 4.0 (Vol. 3), Part C, Section 11, 18
+ \li \c https://www.bluetooth.org/en-us/specification/assigned-numbers/generic-access-profile
+ */
+ /**********************************************************************/
+ enum DataType_t {
+ FLAGS = 0x01, /**< \ref *Flags */
+ INCOMPLETE_LIST_16BIT_SERVICE_IDS = 0x02, /**< Incomplete list of 16-bit Service IDs */
+ COMPLETE_LIST_16BIT_SERVICE_IDS = 0x03, /**< Complete list of 16-bit Service IDs */
+ INCOMPLETE_LIST_32BIT_SERVICE_IDS = 0x04, /**< Incomplete list of 32-bit Service IDs (not relevant for Bluetooth 4.0) */
+ COMPLETE_LIST_32BIT_SERVICE_IDS = 0x05, /**< Complete list of 32-bit Service IDs (not relevant for Bluetooth 4.0) */
+ INCOMPLETE_LIST_128BIT_SERVICE_IDS = 0x06, /**< Incomplete list of 128-bit Service IDs */
+ COMPLETE_LIST_128BIT_SERVICE_IDS = 0x07, /**< Complete list of 128-bit Service IDs */
+ SHORTENED_LOCAL_NAME = 0x08, /**< Shortened Local Name */
+ COMPLETE_LOCAL_NAME = 0x09, /**< Complete Local Name */
+ TX_POWER_LEVEL = 0x0A, /**< TX Power Level (in dBm) */
+ DEVICE_ID = 0x10, /**< Device ID */
+ SLAVE_CONNECTION_INTERVAL_RANGE = 0x12, /**< Slave Connection Interval Range */
+ LIST_128BIT_SOLICITATION_IDS = 0x15, /**< List of 128 bit service UUIDs the device is looking for */
+ SERVICE_DATA = 0x16, /**< Service Data */
+ APPEARANCE = 0x19, /**< \ref Appearance */
+ ADVERTISING_INTERVAL = 0x1A, /**< Advertising Interval */
+ MANUFACTURER_SPECIFIC_DATA = 0xFF /**< Manufacturer Specific Data */
+ };
+ typedef enum DataType_t DataType; /* Deprecated type alias. This may be dropped in a future release. */
+
+ /**********************************************************************/
+ /*!
+ \brief
+ A list of values for the FLAGS AD Type.
+
+ \note
+ You can use more than one value in the FLAGS AD Type (ex.
+ LE_GENERAL_DISCOVERABLE and BREDR_NOT_SUPPORTED).
+
+ \par Source
+ \li \c Bluetooth Core Specification 4.0 (Vol. 3), Part C, Section 18.1
+ */
+ /**********************************************************************/
+ enum Flags_t {
+ LE_LIMITED_DISCOVERABLE = 0x01, /**< *Peripheral device is discoverable for a limited period of time. */
+ LE_GENERAL_DISCOVERABLE = 0x02, /**< Peripheral device is discoverable at any moment. */
+ BREDR_NOT_SUPPORTED = 0x04, /**< Peripheral device is LE only. */
+ SIMULTANEOUS_LE_BREDR_C = 0x08, /**< Not relevant - central mode only. */
+ SIMULTANEOUS_LE_BREDR_H = 0x10 /**< Not relevant - central mode only. */
+ };
+ typedef enum Flags_t Flags; /* Deprecated type alias. This may be dropped in a future release. */
+
+ /**********************************************************************/
+ /*!
+ \brief
+ A list of values for the APPEARANCE AD Type, which describes the
+ physical shape or appearance of the device.
+
+ \par Source
+ \li \c Bluetooth Core Specification Supplement, Part A, Section 1.12
+ \li \c Bluetooth Core Specification 4.0 (Vol. 3), Part C, Section 12.2
+ \li \c https://developer.bluetooth.org/gatt/characteristics/Pages/CharacteristicViewer.aspx?u=org.bluetooth.characteristic.gap.appearance.xml
+ */
+ /**********************************************************************/
+ enum Appearance_t {
+ UNKNOWN = 0, /**< Unknown or unspecified appearance type. */
+ GENERIC_PHONE = 64, /**< Generic Phone. */
+ GENERIC_COMPUTER = 128, /**< Generic Computer. */
+ GENERIC_WATCH = 192, /**< Generic Watch. */
+ WATCH_SPORTS_WATCH = 193, /**< Sports Watch. */
+ GENERIC_CLOCK = 256, /**< Generic Clock. */
+ GENERIC_DISPLAY = 320, /**< Generic Display. */
+ GENERIC_REMOTE_CONTROL = 384, /**< Generic Remote Control. */
+ GENERIC_EYE_GLASSES = 448, /**< Generic Eye Glasses. */
+ GENERIC_TAG = 512, /**< Generic Tag. */
+ GENERIC_KEYRING = 576, /**< Generic Keyring. */
+ GENERIC_MEDIA_PLAYER = 640, /**< Generic Media Player. */
+ GENERIC_BARCODE_SCANNER = 704, /**< Generic Barcode Scanner. */
+ GENERIC_THERMOMETER = 768, /**< Generic Thermometer. */
+ THERMOMETER_EAR = 769, /**< Ear Thermometer. */
+ GENERIC_HEART_RATE_SENSOR = 832, /**< Generic Heart Rate Sensor. */
+ HEART_RATE_SENSOR_HEART_RATE_BELT = 833, /**< Belt Heart Rate Sensor. */
+ GENERIC_BLOOD_PRESSURE = 896, /**< Generic Blood Pressure. */
+ BLOOD_PRESSURE_ARM = 897, /**< Arm Blood Pressure. */
+ BLOOD_PRESSURE_WRIST = 898, /**< Wrist Blood Pressure. */
+ HUMAN_INTERFACE_DEVICE_HID = 960, /**< Human Interface Device (HID). */
+ KEYBOARD = 961, /**< Keyboard. */
+ MOUSE = 962, /**< Mouse. */
+ JOYSTICK = 963, /**< Joystick. */
+ GAMEPAD = 964, /**< Gamepad. */
+ DIGITIZER_TABLET = 965, /**< Digitizer Tablet. */
+ CARD_READER = 966, /**< Card Reader. */
+ DIGITAL_PEN = 967, /**< Digital Pen. */
+ BARCODE_SCANNER = 968, /**< Barcode Scanner. */
+ GENERIC_GLUCOSE_METER = 1024, /**< Generic Glucose Meter. */
+ GENERIC_RUNNING_WALKING_SENSOR = 1088, /**< Generic Running/Walking Sensor. */
+ RUNNING_WALKING_SENSOR_IN_SHOE = 1089, /**< In Shoe Running/Walking Sensor. */
+ RUNNING_WALKING_SENSOR_ON_SHOE = 1090, /**< On Shoe Running/Walking Sensor. */
+ RUNNING_WALKING_SENSOR_ON_HIP = 1091, /**< On Hip Running/Walking Sensor. */
+ GENERIC_CYCLING = 1152, /**< Generic Cycling. */
+ CYCLING_CYCLING_COMPUTER = 1153, /**< Cycling Computer. */
+ CYCLING_SPEED_SENSOR = 1154, /**< Cycling Speed Sensor. */
+ CYCLING_CADENCE_SENSOR = 1155, /**< Cycling Cadence Sensor. */
+ CYCLING_POWER_SENSOR = 1156, /**< Cycling Power Sensor. */
+ CYCLING_SPEED_AND_CADENCE_SENSOR = 1157, /**< Cycling Speed and Cadence Sensor. */
+ PULSE_OXIMETER_GENERIC = 3136, /**< Generic Pulse Oximeter. */
+ PULSE_OXIMETER_FINGERTIP = 3137, /**< Fingertip Pulse Oximeter. */
+ PULSE_OXIMETER_WRIST_WORN = 3138, /**< Wrist Worn Pulse Oximeter. */
+ OUTDOOR_GENERIC = 5184, /**< Generic Outdoor. */
+ OUTDOOR_LOCATION_DISPLAY_DEVICE = 5185, /**< Outdoor Location Display Device. */
+ OUTDOOR_LOCATION_AND_NAVIGATION_DISPLAY_DEVICE = 5186, /**< Outdoor Location and Navigation Display Device. */
+ OUTDOOR_LOCATION_POD = 5187, /**< Outdoor Location Pod. */
+ OUTDOOR_LOCATION_AND_NAVIGATION_POD = 5188 /**< Outdoor Location and Navigation Pod. */
+ };
+ typedef enum Appearance_t Appearance; /* Deprecated type alias. This may be dropped in a future release. */
+
+ GapAdvertisingData(void) : _payload(), _payloadLen(0), _appearance(GENERIC_TAG) {
+ /* empty */
+ }
+
+ /**
+ * Adds advertising data based on the specified AD type (see DataType).
+ *
+ * @param advDataType The Advertising 'DataType' to add.
+ * @param payload Pointer to the payload contents.
+ * @param len Size of the payload in bytes.
+ *
+ * @return BLE_ERROR_BUFFER_OVERFLOW if the specified data would cause the
+ * advertising buffer to overflow, else BLE_ERROR_NONE.
+ */
+ ble_error_t addData(DataType advDataType, const uint8_t *payload, uint8_t len)
+ {
+ ble_error_t result = BLE_ERROR_BUFFER_OVERFLOW;
+
+ // find field
+ uint8_t* field = findField(advDataType);
+
+ // Field type already exist, either add to field or replace
+ if (field) {
+ switch(advDataType) {
+ // These fields will be overwritten with the new value
+ case FLAGS:
+ case SHORTENED_LOCAL_NAME:
+ case COMPLETE_LOCAL_NAME:
+ case TX_POWER_LEVEL:
+ case DEVICE_ID:
+ case SLAVE_CONNECTION_INTERVAL_RANGE:
+ case SERVICE_DATA:
+ case APPEARANCE:
+ case ADVERTISING_INTERVAL:
+ case MANUFACTURER_SPECIFIC_DATA: {
+ // current field length, with the type subtracted
+ uint8_t dataLength = field[0] - 1;
+
+ // new data has same length, do in-order replacement
+ if (len == dataLength) {
+ for (uint8_t idx = 0; idx < dataLength; idx++) {
+ field[2 + idx] = payload[idx];
+ }
+ } else {
+ // check if data fits
+ if ((_payloadLen - dataLength + len) <= GAP_ADVERTISING_DATA_MAX_PAYLOAD) {
+
+ // remove old field
+ while ((field + dataLength + 2) < &_payload[_payloadLen]) {
+ *field = field[dataLength + 2];
+ field++;
+ }
+
+ // reduce length
+ _payloadLen -= dataLength + 2;
+
+ // add new field
+ result = appendField(advDataType, payload, len);
+ }
+ }
+
+ break;
+ }
+ // These fields will have the new data appended if there is sufficient space
+ case INCOMPLETE_LIST_16BIT_SERVICE_IDS:
+ case COMPLETE_LIST_16BIT_SERVICE_IDS:
+ case INCOMPLETE_LIST_32BIT_SERVICE_IDS:
+ case COMPLETE_LIST_32BIT_SERVICE_IDS:
+ case INCOMPLETE_LIST_128BIT_SERVICE_IDS:
+ case COMPLETE_LIST_128BIT_SERVICE_IDS:
+ case LIST_128BIT_SOLICITATION_IDS: {
+ // check if data fits
+ if ((_payloadLen + len) <= GAP_ADVERTISING_DATA_MAX_PAYLOAD) {
+ // make room for new field by moving the remainder of the
+ // advertisement payload "to the right" starting after the
+ // TYPE field.
+ uint8_t* end = &_payload[_payloadLen];
+
+ while (&field[1] < end) {
+ end[len] = *end;
+ end--;
+ }
+
+ // insert new data
+ for (uint8_t idx = 0; idx < len; idx++) {
+ field[2 + idx] = payload[idx];
+ }
+
+ // increment lengths
+ field[0] += len;
+ _payloadLen += len;
+
+ result = BLE_ERROR_NONE;
+ }
+
+ break;
+ }
+ // Field exists but updating it is not supported. Abort operation.
+ default:
+ result = BLE_ERROR_NOT_IMPLEMENTED;
+ break;
+ }
+ } else {
+ // field doesn't exists, insert new
+ result = appendField(advDataType, payload, len);
+ }
+
+ return result;
+ }
+
+ /**
+ * Update a particular ADV field in the advertising payload (based on
+ * matching type and length). Note: the length of the new data must be the
+ * same as the old one.
+ *
+ * @param[in] advDataType The Advertising 'DataType' to add.
+ * @param[in] payload Pointer to the payload contents.
+ * @param[in] len Size of the payload in bytes.
+ *
+ * @return BLE_ERROR_UNSPECIFIED if the specified field is not found, else
+ * BLE_ERROR_NONE.
+ */
+ ble_error_t updateData(DataType_t advDataType, const uint8_t *payload, uint8_t len)
+ {
+ if ((payload == NULL) || (len == 0)) {
+ return BLE_ERROR_INVALID_PARAM;
+ }
+
+ /* A local struct to describe an ADV field. This definition comes from the Bluetooth Core Spec. (v4.2) Part C, Section 11. */
+ struct ADVField_t {
+ uint8_t len; /* Describes the length (in bytes) of the following type and bytes. */
+ uint8_t type; /* Should have the same representation of DataType_t (above). */
+ uint8_t bytes[0]; /* A placeholder for variable length data. */
+ };
+
+ /* Iterate over the adv fields looking for the first match. */
+ uint8_t byteIndex = 0;
+ while (byteIndex < _payloadLen) {
+ ADVField_t *currentADV = (ADVField_t *)&_payload[byteIndex];
+ if ((currentADV->len == (len + 1)) && /* Incoming len only describes the payload, whereas ADV->len describes [type + payload]. */
+ (currentADV->type == advDataType)) {
+ memcpy(currentADV->bytes, payload, len);
+ return BLE_ERROR_NONE;
+ }
+
+ byteIndex += (currentADV->len + 1); /* Advance by len+1; '+1' is needed to span the len field itself. */
+ }
+
+ return BLE_ERROR_UNSPECIFIED;
+ }
+
+ /**
+ * Helper function to add APPEARANCE data to the advertising payload.
+ *
+ * @param appearance
+ * The APPEARANCE value to add.
+ *
+ * @return BLE_ERROR_BUFFER_OVERFLOW if the specified data would cause the
+ * advertising buffer to overflow, else BLE_ERROR_NONE.
+ */
+ ble_error_t addAppearance(Appearance appearance = GENERIC_TAG) {
+ _appearance = appearance;
+ return addData(GapAdvertisingData::APPEARANCE, (uint8_t *)&appearance, 2);
+ }
+
+ /**
+ * Helper function to add FLAGS data to the advertising payload.
+ * @param flags
+ * LE_LIMITED_DISCOVERABLE
+ * The peripheral is discoverable for a limited period of time.
+ * LE_GENERAL_DISCOVERABLE
+ * The peripheral is permanently discoverable.
+ * BREDR_NOT_SUPPORTED
+ * This peripheral is a Bluetooth Low Energy only device (no EDR support).
+ *
+ * @return BLE_ERROR_BUFFER_OVERFLOW if the specified data would cause the
+ * advertising buffer to overflow, else BLE_ERROR_NONE.
+ */
+ ble_error_t addFlags(uint8_t flags = LE_GENERAL_DISCOVERABLE) {
+ return addData(GapAdvertisingData::FLAGS, &flags, 1);
+ }
+
+ /**
+ * Helper function to add TX_POWER_LEVEL data to the advertising payload.
+ *
+ * @return BLE_ERROR_BUFFER_OVERFLOW if the specified data would cause the
+ * advertising buffer to overflow, else BLE_ERROR_NONE.
+ */
+ ble_error_t addTxPower(int8_t txPower) {
+ /* To Do: Basic error checking to make sure txPower is in range. */
+ return addData(GapAdvertisingData::TX_POWER_LEVEL, (uint8_t *)&txPower, 1);
+ }
+
+ /**
+ * Clears the payload and resets the payload length counter.
+ */
+ void clear(void) {
+ memset(&_payload, 0, GAP_ADVERTISING_DATA_MAX_PAYLOAD);
+ _payloadLen = 0;
+ }
+
+ /**
+ * Returns a pointer to the current payload.
+ */
+ const uint8_t *getPayload(void) const {
+ return _payload;
+ }
+
+ /**
+ * Returns the current payload length (0..31 bytes).
+ */
+ uint8_t getPayloadLen(void) const {
+ return _payloadLen;
+ }
+
+ /**
+ * Returns the 16-bit appearance value for this device.
+ */
+ uint16_t getAppearance(void) const {
+ return (uint16_t)_appearance;
+ }
+
+ /**
+ * Search advertisement data for field.
+ * Returns pointer to the first element in the field if found, NULL otherwise.
+ * Where the first element is the length of the field.
+ */
+ const uint8_t* findField(DataType_t type) const {
+ return findField(type);
+ }
+
+private:
+ /**
+ * Append advertising data based on the specified AD type (see DataType)
+ */
+ ble_error_t appendField(DataType advDataType, const uint8_t *payload, uint8_t len)
+ {
+ /* Make sure we don't exceed the 31 byte payload limit */
+ if (_payloadLen + len + 2 > GAP_ADVERTISING_DATA_MAX_PAYLOAD) {
+ return BLE_ERROR_BUFFER_OVERFLOW;
+ }
+
+ /* Field length. */
+ memset(&_payload[_payloadLen], len + 1, 1);
+ _payloadLen++;
+
+ /* Field ID. */
+ memset(&_payload[_payloadLen], (uint8_t)advDataType, 1);
+ _payloadLen++;
+
+ /* Payload. */
+ memcpy(&_payload[_payloadLen], payload, len);
+ _payloadLen += len;
+
+ return BLE_ERROR_NONE;
+ }
+
+ /**
+ * Search advertisement data for field.
+ * Returns pointer to the first element in the field if found, NULL otherwise.
+ * Where the first element is the length of the field.
+ */
+ uint8_t* findField(DataType_t type) {
+ // scan through advertisement data
+ for (uint8_t idx = 0; idx < _payloadLen; ) {
+ uint8_t fieldType = _payload[idx + 1];
+
+ if (fieldType == type) {
+ return &_payload[idx];
+ }
+
+ // advance to next field
+ idx += _payload[idx] + 1;
+ }
+
+ // field not found
+ return NULL;
+ }
+
+ uint8_t _payload[GAP_ADVERTISING_DATA_MAX_PAYLOAD];
+ uint8_t _payloadLen;
+ uint16_t _appearance;
+};
+
#endif // ifndef __GAP_ADVERTISING_DATA_H__
\ No newline at end of file