aapje monkey / BLE_API

Bike service

Fork of BLE_API by Bluetooth Low Energy

ble/BLE.h@1176:1d25cd85e851, 2016-04-06 (annotated)

Committer:
vcoubard
Date:
Wed Apr 06 19:15:22 2016 +0100
Revision:
1176:1d25cd85e851
Parent:
1157:e1ea38b576c6
Child:
1177:8b308f971420
Synchronized with git rev b0166287

Author: Andres Amaya Garcia

Remove init @note from BLE.h

Who changed what in which revision?

UserRevisionLine numberNew contents of line
vcoubard 1132:692ddf04fc42 1 /* mbed Microcontroller Library
vcoubard 1132:692ddf04fc42 2 * Copyright (c) 2006-2013 ARM Limited
vcoubard 1132:692ddf04fc42 3 *
vcoubard 1132:692ddf04fc42 4 * Licensed under the Apache License, Version 2.0 (the "License");
vcoubard 1132:692ddf04fc42 5 * you may not use this file except in compliance with the License.
vcoubard 1132:692ddf04fc42 6 * You may obtain a copy of the License at
vcoubard 1132:692ddf04fc42 7 *
vcoubard 1132:692ddf04fc42 8 * http://www.apache.org/licenses/LICENSE-2.0
vcoubard 1132:692ddf04fc42 9 *
vcoubard 1132:692ddf04fc42 10 * Unless required by applicable law or agreed to in writing, software
vcoubard 1132:692ddf04fc42 11 * distributed under the License is distributed on an "AS IS" BASIS,
vcoubard 1132:692ddf04fc42 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
vcoubard 1132:692ddf04fc42 13 * See the License for the specific language governing permissions and
vcoubard 1132:692ddf04fc42 14 * limitations under the License.
vcoubard 1132:692ddf04fc42 15 */
vcoubard 1132:692ddf04fc42 16
vcoubard 1132:692ddf04fc42 17 #ifndef __BLE_H__
vcoubard 1132:692ddf04fc42 18 #define __BLE_H__
vcoubard 1132:692ddf04fc42 19
vcoubard 1132:692ddf04fc42 20 #include "blecommon.h"
vcoubard 1132:692ddf04fc42 21 #include "Gap.h"
vcoubard 1132:692ddf04fc42 22 #include "GattServer.h"
vcoubard 1132:692ddf04fc42 23 #include "GattClient.h"
vcoubard 1132:692ddf04fc42 24
vcoubard 1132:692ddf04fc42 25 #include "ble/FunctionPointerWithContext.h"
vcoubard 1132:692ddf04fc42 26
vcoubard 1132:692ddf04fc42 27 #ifdef YOTTA_CFG_MBED_OS
vcoubard 1132:692ddf04fc42 28 #include "mbed-drivers/mbed_error.h"
vcoubard 1132:692ddf04fc42 29 #else
vcoubard 1132:692ddf04fc42 30 #include "mbed_error.h"
vcoubard 1132:692ddf04fc42 31 #endif
vcoubard 1132:692ddf04fc42 32
vcoubard 1132:692ddf04fc42 33 /* Forward declaration for the implementation class */
vcoubard 1132:692ddf04fc42 34 class BLEInstanceBase;
vcoubard 1132:692ddf04fc42 35
vcoubard 1132:692ddf04fc42 36 /**
vcoubard 1132:692ddf04fc42 37 * The base class used to abstract away BLE-capable radio transceivers or SOCs,
vcoubard 1132:692ddf04fc42 38 * so that the BLE API can work with any radio transparently.
vcoubard 1132:692ddf04fc42 39 */
vcoubard 1132:692ddf04fc42 40 class BLE
vcoubard 1132:692ddf04fc42 41 {
vcoubard 1132:692ddf04fc42 42 public:
vcoubard 1157:e1ea38b576c6 43 typedef unsigned InstanceID_t; /**< The type returned by BLE::getInstanceID(). */
vcoubard 1132:692ddf04fc42 44
vcoubard 1132:692ddf04fc42 45 /**
vcoubard 1132:692ddf04fc42 46 * The context provided to init-completion-callbacks (see init() below).
vcoubard 1132:692ddf04fc42 47 *
vcoubard 1132:692ddf04fc42 48 * @param ble
vcoubard 1132:692ddf04fc42 49 * A reference to the BLE instance being initialized.
vcoubard 1132:692ddf04fc42 50 * @param error
vcoubard 1132:692ddf04fc42 51 * Captures the result of initialization. It is set to
vcoubard 1132:692ddf04fc42 52 * BLE_ERROR_NONE if initialization completed successfully. Else
vcoubard 1132:692ddf04fc42 53 * the error value is implementation specific.
vcoubard 1132:692ddf04fc42 54 */
vcoubard 1132:692ddf04fc42 55 struct InitializationCompleteCallbackContext {
vcoubard 1157:e1ea38b576c6 56 BLE& ble; /**< Reference to the BLE object that has been initialized */
vcoubard 1157:e1ea38b576c6 57 ble_error_t error; /**< Error status of the initialization. It is set to BLE_ERROR_NONE if initialization completed successfully. */
vcoubard 1132:692ddf04fc42 58 };
vcoubard 1132:692ddf04fc42 59
vcoubard 1132:692ddf04fc42 60 /**
vcoubard 1132:692ddf04fc42 61 * The signature for function-pointer like callbacks for initialization-completion.
vcoubard 1132:692ddf04fc42 62 *
vcoubard 1132:692ddf04fc42 63 * @note There are two versions of init(). In addition to the simple
vcoubard 1132:692ddf04fc42 64 * function-pointer, init() can also take a <Object, member> tuple as its
vcoubard 1132:692ddf04fc42 65 * callback target. In case of the latter, the following declaration doesn't apply.
vcoubard 1132:692ddf04fc42 66 */
vcoubard 1132:692ddf04fc42 67 typedef void (*InitializationCompleteCallback_t)(InitializationCompleteCallbackContext *context);
vcoubard 1132:692ddf04fc42 68
vcoubard 1132:692ddf04fc42 69 /**
vcoubard 1132:692ddf04fc42 70 * Initialize the BLE controller. This should be called before using
vcoubard 1157:e1ea38b576c6 71 * anything else in the BLE API.
vcoubard 1132:692ddf04fc42 72 *
vcoubard 1132:692ddf04fc42 73 * init() hands control to the underlying BLE module to accomplish
vcoubard 1132:692ddf04fc42 74 * initialization. This initialization may tacitly depend on other hardware
vcoubard 1132:692ddf04fc42 75 * setup (such as clocks or power-modes) that happens early on during
vcoubard 1132:692ddf04fc42 76 * system startup. It may not be safe to call init() from a global static
vcoubard 1132:692ddf04fc42 77 * context where ordering is compiler-specific and can't be guaranteed - it
vcoubard 1132:692ddf04fc42 78 * is safe to call BLE::init() from within main().
vcoubard 1132:692ddf04fc42 79 *
vcoubard 1132:692ddf04fc42 80 * @param initCompleteCallback
vcoubard 1132:692ddf04fc42 81 * A callback for when initialization completes for a BLE
vcoubard 1132:692ddf04fc42 82 * instance. This is an optional parameter; if no callback is
vcoubard 1132:692ddf04fc42 83 * set up the application can still determine the status of
vcoubard 1132:692ddf04fc42 84 * initialization using BLE::hasInitialized() (see below).
vcoubard 1132:692ddf04fc42 85 *
vcoubard 1132:692ddf04fc42 86 * @return BLE_ERROR_NONE if the initialization procedure was started
vcoubard 1132:692ddf04fc42 87 * successfully.
vcoubard 1132:692ddf04fc42 88 *
vcoubard 1132:692ddf04fc42 89 * @note If init() returns BLE_ERROR_NONE, the underlying stack must invoke
vcoubard 1132:692ddf04fc42 90 * the initialization completion callback at some point.
vcoubard 1132:692ddf04fc42 91 *
vcoubard 1132:692ddf04fc42 92 * @note Nearly all BLE APIs would return
vcoubard 1132:692ddf04fc42 93 * BLE_ERROR_INITIALIZATION_INCOMPLETE if used on an instance before the
vcoubard 1132:692ddf04fc42 94 * corresponding transport is initialized.
vcoubard 1132:692ddf04fc42 95 *
vcoubard 1132:692ddf04fc42 96 * @note There are two versions of init(). In addition to the simple
vcoubard 1132:692ddf04fc42 97 * function-pointer, init() can also take an <Object, member> tuple as its
vcoubard 1132:692ddf04fc42 98 * callback target.
vcoubard 1132:692ddf04fc42 99 */
vcoubard 1132:692ddf04fc42 100 ble_error_t init(InitializationCompleteCallback_t initCompleteCallback = NULL) {
vcoubard 1132:692ddf04fc42 101 FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback(initCompleteCallback);
vcoubard 1132:692ddf04fc42 102 return initImplementation(callback);
vcoubard 1132:692ddf04fc42 103 }
vcoubard 1132:692ddf04fc42 104
vcoubard 1132:692ddf04fc42 105 /**
vcoubard 1132:692ddf04fc42 106 * An alternate declaration for init(). This one takes an <Object, member> tuple as its
vcoubard 1132:692ddf04fc42 107 * callback target.
vcoubard 1132:692ddf04fc42 108 */
vcoubard 1132:692ddf04fc42 109 template<typename T>
vcoubard 1132:692ddf04fc42 110 ble_error_t init(T *object, void (T::*initCompleteCallback)(InitializationCompleteCallbackContext *context)) {
vcoubard 1132:692ddf04fc42 111 FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback(object, initCompleteCallback);
vcoubard 1132:692ddf04fc42 112 return initImplementation(callback);
vcoubard 1132:692ddf04fc42 113 }
vcoubard 1132:692ddf04fc42 114
vcoubard 1132:692ddf04fc42 115 /**
vcoubard 1132:692ddf04fc42 116 * @return true if initialization has completed for the underlying BLE
vcoubard 1132:692ddf04fc42 117 * transport.
vcoubard 1132:692ddf04fc42 118 *
vcoubard 1132:692ddf04fc42 119 * The application can set up a callback to signal completion of
vcoubard 1132:692ddf04fc42 120 * initialization when using init(). Otherwise, this method can be used to
vcoubard 1132:692ddf04fc42 121 * poll the state of initialization.
vcoubard 1132:692ddf04fc42 122 */
vcoubard 1132:692ddf04fc42 123 bool hasInitialized(void) const;
vcoubard 1132:692ddf04fc42 124
vcoubard 1132:692ddf04fc42 125 /**
vcoubard 1132:692ddf04fc42 126 * Purge the BLE stack of GATT and GAP state. init() must be called
vcoubard 1132:692ddf04fc42 127 * afterwards to re-instate services and GAP state. This API offers a way to
vcoubard 1132:692ddf04fc42 128 * repopulate the GATT database with new services and characteristics.
vcoubard 1132:692ddf04fc42 129 */
vcoubard 1132:692ddf04fc42 130 ble_error_t shutdown(void);
vcoubard 1132:692ddf04fc42 131
vcoubard 1132:692ddf04fc42 132 /**
vcoubard 1132:692ddf04fc42 133 * This call allows the application to get the BLE stack version information.
vcoubard 1132:692ddf04fc42 134 *
vcoubard 1132:692ddf04fc42 135 * @return A pointer to a const string representing the version.
vcoubard 1157:e1ea38b576c6 136 *
vcoubard 1157:e1ea38b576c6 137 * @note The string returned is owned by BLE API.
vcoubard 1132:692ddf04fc42 138 */
vcoubard 1132:692ddf04fc42 139 const char *getVersion(void);
vcoubard 1132:692ddf04fc42 140
vcoubard 1157:e1ea38b576c6 141 /**
vcoubard 1157:e1ea38b576c6 142 * Accessor to Gap. All Gap related functionality requires
vcoubard 1132:692ddf04fc42 143 * going through this accessor.
vcoubard 1157:e1ea38b576c6 144 *
vcoubard 1157:e1ea38b576c6 145 * @return A reference to a Gap object associated to this BLE instance.
vcoubard 1157:e1ea38b576c6 146 */
vcoubard 1157:e1ea38b576c6 147 Gap &gap();
vcoubard 1157:e1ea38b576c6 148
vcoubard 1157:e1ea38b576c6 149 /**
vcoubard 1157:e1ea38b576c6 150 * A const alternative to gap().
vcoubard 1157:e1ea38b576c6 151 *
vcoubard 1157:e1ea38b576c6 152 * @return A const reference to a Gap object associated to this BLE instance.
vcoubard 1132:692ddf04fc42 153 */
vcoubard 1132:692ddf04fc42 154 const Gap &gap() const;
vcoubard 1132:692ddf04fc42 155
vcoubard 1157:e1ea38b576c6 156 /**
vcoubard 1157:e1ea38b576c6 157 * Accessor to GattServer. All GattServer related functionality requires
vcoubard 1157:e1ea38b576c6 158 * going through this accessor.
vcoubard 1157:e1ea38b576c6 159 *
vcoubard 1157:e1ea38b576c6 160 * @return A reference to a GattServer object associated to this BLE instance.
vcoubard 1132:692ddf04fc42 161 */
vcoubard 1156:e28c7aac64ab 162 GattServer& gattServer();
vcoubard 1143:a358d0d20f62 163
vcoubard 1157:e1ea38b576c6 164 /**
vcoubard 1157:e1ea38b576c6 165 * A const alternative to gattServer().
vcoubard 1157:e1ea38b576c6 166 *
vcoubard 1157:e1ea38b576c6 167 * @return A const reference to a GattServer object associated to this BLE instance.
vcoubard 1143:a358d0d20f62 168 */
vcoubard 1157:e1ea38b576c6 169 const GattServer& gattServer() const;
vcoubard 1157:e1ea38b576c6 170
vcoubard 1157:e1ea38b576c6 171 /**
vcoubard 1157:e1ea38b576c6 172 * Accessors to GattClient. All GattClient related functionality requires going
vcoubard 1157:e1ea38b576c6 173 * through this accessor.
vcoubard 1157:e1ea38b576c6 174 *
vcoubard 1157:e1ea38b576c6 175 * @return A reference to a GattClient object associated to this BLE instance.
vcoubard 1157:e1ea38b576c6 176 */
vcoubard 1156:e28c7aac64ab 177 GattClient& gattClient();
vcoubard 1143:a358d0d20f62 178
vcoubard 1157:e1ea38b576c6 179 /**
vcoubard 1157:e1ea38b576c6 180 * A const alternative to gattClient().
vcoubard 1157:e1ea38b576c6 181 *
vcoubard 1157:e1ea38b576c6 182 * @return A const reference to a GattClient object associated to this BLE instance.
vcoubard 1157:e1ea38b576c6 183 */
vcoubard 1157:e1ea38b576c6 184 const GattClient& gattClient() const;
vcoubard 1157:e1ea38b576c6 185
vcoubard 1157:e1ea38b576c6 186 /**
vcoubard 1157:e1ea38b576c6 187 * Accessors to SecurityManager. All SecurityManager related functionality requires
vcoubard 1157:e1ea38b576c6 188 * going through this accessor.
vcoubard 1157:e1ea38b576c6 189 *
vcoubard 1157:e1ea38b576c6 190 * @return A reference to a SecurityManager object associated to this BLE instance.
vcoubard 1157:e1ea38b576c6 191 */
vcoubard 1157:e1ea38b576c6 192 SecurityManager& securityManager();
vcoubard 1157:e1ea38b576c6 193
vcoubard 1157:e1ea38b576c6 194 /**
vcoubard 1157:e1ea38b576c6 195 * A const alternative to securityManager().
vcoubard 1157:e1ea38b576c6 196 *
vcoubard 1157:e1ea38b576c6 197 * @return A const reference to a SecurityManager object associated to this BLE instance.
vcoubard 1132:692ddf04fc42 198 */
vcoubard 1132:692ddf04fc42 199 const SecurityManager& securityManager() const;
vcoubard 1132:692ddf04fc42 200
vcoubard 1132:692ddf04fc42 201 /**
vcoubard 1132:692ddf04fc42 202 * Yield control to the BLE stack or to other tasks waiting for events. This
vcoubard 1132:692ddf04fc42 203 * is a sleep function that will return when there is an application-specific
vcoubard 1132:692ddf04fc42 204 * interrupt, but the MCU might wake up several times before
vcoubard 1132:692ddf04fc42 205 * returning (to service the stack). This is not always interchangeable with
vcoubard 1132:692ddf04fc42 206 * WFE().
vcoubard 1132:692ddf04fc42 207 */
vcoubard 1132:692ddf04fc42 208 void waitForEvent(void);
vcoubard 1132:692ddf04fc42 209
vcoubard 1132:692ddf04fc42 210 public:
vcoubard 1157:e1ea38b576c6 211 /**
vcoubard 1157:e1ea38b576c6 212 * The value of the BLE::InstanceID_t for the default BLE instance.
vcoubard 1157:e1ea38b576c6 213 */
vcoubard 1132:692ddf04fc42 214 static const InstanceID_t DEFAULT_INSTANCE = 0;
vcoubard 1132:692ddf04fc42 215 #ifndef YOTTA_CFG_BLE_INSTANCES_COUNT
vcoubard 1157:e1ea38b576c6 216 /**
vcoubard 1157:e1ea38b576c6 217 * The number of permitted BLE instances for the application.
vcoubard 1157:e1ea38b576c6 218 */
vcoubard 1132:692ddf04fc42 219 static const InstanceID_t NUM_INSTANCES = 1;
vcoubard 1132:692ddf04fc42 220 #else
vcoubard 1157:e1ea38b576c6 221 /**
vcoubard 1157:e1ea38b576c6 222 * The number of permitted BLE instances for the application.
vcoubard 1157:e1ea38b576c6 223 */
vcoubard 1132:692ddf04fc42 224 static const InstanceID_t NUM_INSTANCES = YOTTA_CFG_BLE_INSTANCES_COUNT;
vcoubard 1132:692ddf04fc42 225 #endif
vcoubard 1132:692ddf04fc42 226
vcoubard 1132:692ddf04fc42 227 /**
vcoubard 1132:692ddf04fc42 228 * Get a reference to the BLE singleton corresponding to a given interface.
vcoubard 1132:692ddf04fc42 229 * There is a static array of BLE singletons.
vcoubard 1132:692ddf04fc42 230 *
vcoubard 1157:e1ea38b576c6 231 * @note Calling Instance() is preferred over constructing a BLE object
vcoubard 1132:692ddf04fc42 232 * directly, as it returns references to singletons.
vcoubard 1132:692ddf04fc42 233 *
vcoubard 1132:692ddf04fc42 234 * @param[in] id
vcoubard 1136:22aada733dbd 235 * Instance-ID. This should be less than NUM_INSTANCES
vcoubard 1132:692ddf04fc42 236 * for the returned BLE singleton to be useful.
vcoubard 1132:692ddf04fc42 237 *
vcoubard 1157:e1ea38b576c6 238 * @return A reference to a single object.
vcoubard 1132:692ddf04fc42 239 */
vcoubard 1132:692ddf04fc42 240 static BLE &Instance(InstanceID_t id = DEFAULT_INSTANCE);
vcoubard 1132:692ddf04fc42 241
vcoubard 1132:692ddf04fc42 242 /**
vcoubard 1132:692ddf04fc42 243 * Constructor for a handle to a BLE instance (the BLE stack). BLE handles
vcoubard 1132:692ddf04fc42 244 * are thin wrappers around a transport object (that is, ptr. to
vcoubard 1132:692ddf04fc42 245 * BLEInstanceBase).
vcoubard 1132:692ddf04fc42 246 *
vcoubard 1132:692ddf04fc42 247 * It is better to create BLE objects as singletons accessed through the
vcoubard 1132:692ddf04fc42 248 * Instance() method. If multiple BLE handles are constructed for the same
vcoubard 1132:692ddf04fc42 249 * interface (using this constructor), they will share the same underlying
vcoubard 1132:692ddf04fc42 250 * transport object.
vcoubard 1132:692ddf04fc42 251 */
vcoubard 1132:692ddf04fc42 252 BLE(InstanceID_t instanceID = DEFAULT_INSTANCE);
vcoubard 1132:692ddf04fc42 253
vcoubard 1132:692ddf04fc42 254 /**
vcoubard 1132:692ddf04fc42 255 * Fetch the ID of a BLE instance. Typically there would only be the DEFAULT_INSTANCE.
vcoubard 1132:692ddf04fc42 256 */
vcoubard 1132:692ddf04fc42 257 InstanceID_t getInstanceID(void) const {
vcoubard 1132:692ddf04fc42 258 return instanceID;
vcoubard 1132:692ddf04fc42 259 }
vcoubard 1132:692ddf04fc42 260
vcoubard 1132:692ddf04fc42 261 /*
vcoubard 1132:692ddf04fc42 262 * Deprecation alert!
vcoubard 1132:692ddf04fc42 263 * All of the following are deprecated and may be dropped in a future
vcoubard 1132:692ddf04fc42 264 * release. Documentation should refer to alternative APIs.
vcoubard 1132:692ddf04fc42 265 */
vcoubard 1132:692ddf04fc42 266
vcoubard 1132:692ddf04fc42 267 /* GAP specific APIs. */
vcoubard 1132:692ddf04fc42 268 public:
vcoubard 1132:692ddf04fc42 269 /**
vcoubard 1132:692ddf04fc42 270 * Set the BTLE MAC address and type.
vcoubard 1132:692ddf04fc42 271 * @return BLE_ERROR_NONE on success.
vcoubard 1132:692ddf04fc42 272 *
vcoubard 1157:e1ea38b576c6 273 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 274 * ble.setAddress(...) should be replaced with
vcoubard 1157:e1ea38b576c6 275 * ble.gap().setAddress(...).
vcoubard 1132:692ddf04fc42 276 */
vcoubard 1136:22aada733dbd 277 ble_error_t setAddress(BLEProtocol::AddressType_t type, const BLEProtocol::AddressBytes_t address) {
vcoubard 1132:692ddf04fc42 278 return gap().setAddress(type, address);
vcoubard 1132:692ddf04fc42 279 }
vcoubard 1132:692ddf04fc42 280
vcoubard 1132:692ddf04fc42 281 /**
vcoubard 1157:e1ea38b576c6 282 * Fetch the Bluetooth Low Energy MAC address and type.
vcoubard 1132:692ddf04fc42 283 * @return BLE_ERROR_NONE on success.
vcoubard 1132:692ddf04fc42 284 *
vcoubard 1157:e1ea38b576c6 285 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 286 * ble.getAddress(...) should be replaced with
vcoubard 1157:e1ea38b576c6 287 * ble.gap().getAddress(...).
vcoubard 1132:692ddf04fc42 288 */
vcoubard 1136:22aada733dbd 289 ble_error_t getAddress(BLEProtocol::AddressType_t *typeP, BLEProtocol::AddressBytes_t address) {
vcoubard 1132:692ddf04fc42 290 return gap().getAddress(typeP, address);
vcoubard 1132:692ddf04fc42 291 }
vcoubard 1132:692ddf04fc42 292
vcoubard 1132:692ddf04fc42 293 /**
vcoubard 1132:692ddf04fc42 294 * Set the GAP advertising mode to use for this device.
vcoubard 1132:692ddf04fc42 295 *
vcoubard 1157:e1ea38b576c6 296 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 297 * ble.setAdvertisingType(...) should be replaced with
vcoubard 1157:e1ea38b576c6 298 * ble.gap().setAdvertisingType(...).
vcoubard 1132:692ddf04fc42 299 */
vcoubard 1132:692ddf04fc42 300 void setAdvertisingType(GapAdvertisingParams::AdvertisingType advType) {
vcoubard 1132:692ddf04fc42 301 gap().setAdvertisingType(advType);
vcoubard 1132:692ddf04fc42 302 }
vcoubard 1132:692ddf04fc42 303
vcoubard 1132:692ddf04fc42 304 /**
vcoubard 1132:692ddf04fc42 305 * @param[in] interval
vcoubard 1132:692ddf04fc42 306 * Advertising interval in units of milliseconds. Advertising
vcoubard 1132:692ddf04fc42 307 * is disabled if interval is 0. If interval is smaller than
vcoubard 1132:692ddf04fc42 308 * the minimum supported value, then the minimum supported
vcoubard 1132:692ddf04fc42 309 * value is used instead. This minimum value can be discovered
vcoubard 1132:692ddf04fc42 310 * using getMinAdvertisingInterval().
vcoubard 1132:692ddf04fc42 311 *
vcoubard 1132:692ddf04fc42 312 * This field must be set to 0 if connectionMode is equal
vcoubard 1132:692ddf04fc42 313 * to ADV_CONNECTABLE_DIRECTED.
vcoubard 1132:692ddf04fc42 314 *
vcoubard 1157:e1ea38b576c6 315 * @note Decreasing this value allows central devices to detect a
vcoubard 1132:692ddf04fc42 316 * peripheral faster, at the expense of more power being used by the radio
vcoubard 1132:692ddf04fc42 317 * due to the higher data transmit rate.
vcoubard 1132:692ddf04fc42 318 *
vcoubard 1157:e1ea38b576c6 319 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 320 * ble.setAdvertisingInterval(...) should be replaced with
vcoubard 1157:e1ea38b576c6 321 * ble.gap().setAdvertisingInterval(...).
vcoubard 1132:692ddf04fc42 322 *
vcoubard 1157:e1ea38b576c6 323 * @note WARNING: This API previously used 0.625ms as the unit for its
vcoubard 1132:692ddf04fc42 324 * 'interval' argument. That required an explicit conversion from
vcoubard 1132:692ddf04fc42 325 * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
vcoubard 1132:692ddf04fc42 326 * no longer required as the new units are milliseconds. Any application
vcoubard 1132:692ddf04fc42 327 * code depending on the old semantics needs to be updated accordingly.
vcoubard 1132:692ddf04fc42 328 */
vcoubard 1132:692ddf04fc42 329 void setAdvertisingInterval(uint16_t interval) {
vcoubard 1132:692ddf04fc42 330 gap().setAdvertisingInterval(interval);
vcoubard 1132:692ddf04fc42 331 }
vcoubard 1132:692ddf04fc42 332
vcoubard 1132:692ddf04fc42 333 /**
vcoubard 1132:692ddf04fc42 334 * @return Minimum Advertising interval in milliseconds.
vcoubard 1132:692ddf04fc42 335 *
vcoubard 1157:e1ea38b576c6 336 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 337 * ble.getMinAdvertisingInterval(...) should be replaced with
vcoubard 1157:e1ea38b576c6 338 * ble.gap().getMinAdvertisingInterval(...).
vcoubard 1132:692ddf04fc42 339 */
vcoubard 1132:692ddf04fc42 340 uint16_t getMinAdvertisingInterval(void) const {
vcoubard 1132:692ddf04fc42 341 return gap().getMinAdvertisingInterval();
vcoubard 1132:692ddf04fc42 342 }
vcoubard 1132:692ddf04fc42 343
vcoubard 1132:692ddf04fc42 344 /**
vcoubard 1132:692ddf04fc42 345 * @return Minimum Advertising interval in milliseconds for non-connectible mode.
vcoubard 1132:692ddf04fc42 346 *
vcoubard 1157:e1ea38b576c6 347 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 348 * ble.getMinNonConnectableAdvertisingInterval(...) should be replaced with
vcoubard 1157:e1ea38b576c6 349 * ble.gap().getMinNonConnectableAdvertisingInterval(...).
vcoubard 1132:692ddf04fc42 350 */
vcoubard 1132:692ddf04fc42 351 uint16_t getMinNonConnectableAdvertisingInterval(void) const {
vcoubard 1132:692ddf04fc42 352 return gap().getMinNonConnectableAdvertisingInterval();
vcoubard 1132:692ddf04fc42 353 }
vcoubard 1132:692ddf04fc42 354
vcoubard 1132:692ddf04fc42 355 /**
vcoubard 1132:692ddf04fc42 356 * @return Maximum Advertising interval in milliseconds.
vcoubard 1132:692ddf04fc42 357 *
vcoubard 1157:e1ea38b576c6 358 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 359 * ble.getMaxAdvertisingInterval(...) should be replaced with
vcoubard 1157:e1ea38b576c6 360 * ble.gap().getMaxAdvertisingInterval(...).
vcoubard 1132:692ddf04fc42 361 */
vcoubard 1132:692ddf04fc42 362 uint16_t getMaxAdvertisingInterval(void) const {
vcoubard 1132:692ddf04fc42 363 return gap().getMaxAdvertisingInterval();
vcoubard 1132:692ddf04fc42 364 }
vcoubard 1132:692ddf04fc42 365
vcoubard 1132:692ddf04fc42 366 /**
vcoubard 1132:692ddf04fc42 367 * @param[in] timeout
vcoubard 1132:692ddf04fc42 368 * Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
vcoubard 1132:692ddf04fc42 369 * and 16383). Use 0 to disable the advertising timeout.
vcoubard 1132:692ddf04fc42 370 *
vcoubard 1157:e1ea38b576c6 371 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 372 * ble.setAdvertisingTimeout(...) should be replaced with
vcoubard 1157:e1ea38b576c6 373 * ble.gap().setAdvertisingTimeout(...).
vcoubard 1132:692ddf04fc42 374 */
vcoubard 1132:692ddf04fc42 375 void setAdvertisingTimeout(uint16_t timeout) {
vcoubard 1132:692ddf04fc42 376 gap().setAdvertisingTimeout(timeout);
vcoubard 1132:692ddf04fc42 377 }
vcoubard 1132:692ddf04fc42 378
vcoubard 1132:692ddf04fc42 379 /**
vcoubard 1132:692ddf04fc42 380 * Set up a particular, user-constructed set of advertisement parameters for
vcoubard 1132:692ddf04fc42 381 * the underlying stack. It would be uncommon for this API to be used
vcoubard 1132:692ddf04fc42 382 * directly; there are other APIs to tweak advertisement parameters
vcoubard 1132:692ddf04fc42 383 * individually (see above).
vcoubard 1132:692ddf04fc42 384 *
vcoubard 1157:e1ea38b576c6 385 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 386 * ble.setAdvertisingParams(...) should be replaced with
vcoubard 1157:e1ea38b576c6 387 * ble.gap().setAdvertisingParams(...).
vcoubard 1132:692ddf04fc42 388 */
vcoubard 1132:692ddf04fc42 389 void setAdvertisingParams(const GapAdvertisingParams &advParams) {
vcoubard 1132:692ddf04fc42 390 gap().setAdvertisingParams(advParams);
vcoubard 1132:692ddf04fc42 391 }
vcoubard 1132:692ddf04fc42 392
vcoubard 1132:692ddf04fc42 393 /**
vcoubard 1132:692ddf04fc42 394 * @return Read back advertising parameters. Useful for storing and
vcoubard 1132:692ddf04fc42 395 * restoring parameters rapidly.
vcoubard 1132:692ddf04fc42 396 *
vcoubard 1157:e1ea38b576c6 397 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 398 * ble.getAdvertisingParams(...) should be replaced with
vcoubard 1157:e1ea38b576c6 399 * ble.gap().getAdvertisingParams(...).
vcoubard 1132:692ddf04fc42 400 */
vcoubard 1132:692ddf04fc42 401 const GapAdvertisingParams &getAdvertisingParams(void) const {
vcoubard 1132:692ddf04fc42 402 return gap().getAdvertisingParams();
vcoubard 1132:692ddf04fc42 403 }
vcoubard 1132:692ddf04fc42 404
vcoubard 1132:692ddf04fc42 405 /**
vcoubard 1132:692ddf04fc42 406 * Accumulate an AD structure in the advertising payload. Please note that
vcoubard 1132:692ddf04fc42 407 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard 1132:692ddf04fc42 408 * as an additional 31 bytes if the advertising payload is too
vcoubard 1132:692ddf04fc42 409 * small.
vcoubard 1132:692ddf04fc42 410 *
vcoubard 1132:692ddf04fc42 411 * @param[in] flags
vcoubard 1132:692ddf04fc42 412 * The flags to add. Please refer to
vcoubard 1132:692ddf04fc42 413 * GapAdvertisingData::Flags for valid flags. Multiple
vcoubard 1132:692ddf04fc42 414 * flags may be specified in combination.
vcoubard 1132:692ddf04fc42 415 *
vcoubard 1157:e1ea38b576c6 416 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 417 * ble.accumulateAdvertisingPayload(flags) should be replaced with
vcoubard 1157:e1ea38b576c6 418 * ble.gap().accumulateAdvertisingPayload(flags).
vcoubard 1132:692ddf04fc42 419 */
vcoubard 1132:692ddf04fc42 420 ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
vcoubard 1132:692ddf04fc42 421 return gap().accumulateAdvertisingPayload(flags);
vcoubard 1132:692ddf04fc42 422 }
vcoubard 1132:692ddf04fc42 423
vcoubard 1132:692ddf04fc42 424 /**
vcoubard 1132:692ddf04fc42 425 * Accumulate an AD structure in the advertising payload. Please note that
vcoubard 1132:692ddf04fc42 426 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard 1132:692ddf04fc42 427 * as an additional 31 bytes if the advertising payload is too
vcoubard 1132:692ddf04fc42 428 * small.
vcoubard 1132:692ddf04fc42 429 *
vcoubard 1132:692ddf04fc42 430 * @param[in] app
vcoubard 1132:692ddf04fc42 431 * The appearance of the peripheral.
vcoubard 1132:692ddf04fc42 432 *
vcoubard 1157:e1ea38b576c6 433 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 434 * ble.accumulateAdvertisingPayload(appearance) should be replaced with
vcoubard 1157:e1ea38b576c6 435 * ble.gap().accumulateAdvertisingPayload(appearance).
vcoubard 1132:692ddf04fc42 436 */
vcoubard 1132:692ddf04fc42 437 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
vcoubard 1132:692ddf04fc42 438 return gap().accumulateAdvertisingPayload(app);
vcoubard 1132:692ddf04fc42 439 }
vcoubard 1132:692ddf04fc42 440
vcoubard 1132:692ddf04fc42 441 /**
vcoubard 1132:692ddf04fc42 442 * Accumulate an AD structure in the advertising payload. Please note that
vcoubard 1132:692ddf04fc42 443 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard 1132:692ddf04fc42 444 * as an additional 31 bytes if the advertising payload is too
vcoubard 1132:692ddf04fc42 445 * small.
vcoubard 1132:692ddf04fc42 446 *
vcoubard 1157:e1ea38b576c6 447 * @param[in] power
vcoubard 1132:692ddf04fc42 448 * The max transmit power to be used by the controller. This
vcoubard 1132:692ddf04fc42 449 * is only a hint.
vcoubard 1132:692ddf04fc42 450 *
vcoubard 1157:e1ea38b576c6 451 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 452 * ble.accumulateAdvertisingPayloadTxPower(txPower) should be replaced with
vcoubard 1157:e1ea38b576c6 453 * ble.gap().accumulateAdvertisingPayloadTxPower(txPower).
vcoubard 1132:692ddf04fc42 454 */
vcoubard 1132:692ddf04fc42 455 ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
vcoubard 1132:692ddf04fc42 456 return gap().accumulateAdvertisingPayloadTxPower(power);
vcoubard 1132:692ddf04fc42 457 }
vcoubard 1132:692ddf04fc42 458
vcoubard 1132:692ddf04fc42 459 /**
vcoubard 1132:692ddf04fc42 460 * Accumulate a variable length byte-stream as an AD structure in the
vcoubard 1132:692ddf04fc42 461 * advertising payload. Please note that the payload is limited to 31 bytes.
vcoubard 1132:692ddf04fc42 462 * The SCAN_RESPONSE message may be used as an additional 31 bytes if the
vcoubard 1132:692ddf04fc42 463 * advertising payload is too small.
vcoubard 1132:692ddf04fc42 464 *
vcoubard 1132:692ddf04fc42 465 * @param type The type that describes the variable length data.
vcoubard 1132:692ddf04fc42 466 * @param data Data bytes.
vcoubard 1132:692ddf04fc42 467 * @param len Data length.
vcoubard 1132:692ddf04fc42 468 *
vcoubard 1157:e1ea38b576c6 469 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 470 * ble.accumulateAdvertisingPayload(...) should be replaced with
vcoubard 1157:e1ea38b576c6 471 * ble.gap().accumulateAdvertisingPayload(...).
vcoubard 1132:692ddf04fc42 472 */
vcoubard 1132:692ddf04fc42 473 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
vcoubard 1132:692ddf04fc42 474 return gap().accumulateAdvertisingPayload(type, data, len);
vcoubard 1132:692ddf04fc42 475 }
vcoubard 1132:692ddf04fc42 476
vcoubard 1132:692ddf04fc42 477 /**
vcoubard 1132:692ddf04fc42 478 * Setup a particular, user-constructed advertisement payload for the
vcoubard 1132:692ddf04fc42 479 * underlying stack. It would be uncommon for this API to be used directly;
vcoubard 1132:692ddf04fc42 480 * there are other APIs to build an advertisement payload (see above).
vcoubard 1132:692ddf04fc42 481 *
vcoubard 1157:e1ea38b576c6 482 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 483 * ble.setAdvertisingData(...) should be replaced with
vcoubard 1157:e1ea38b576c6 484 * ble.gap().setAdvertisingPayload(...).
vcoubard 1132:692ddf04fc42 485 */
vcoubard 1132:692ddf04fc42 486 ble_error_t setAdvertisingData(const GapAdvertisingData &advData) {
vcoubard 1132:692ddf04fc42 487 return gap().setAdvertisingPayload(advData);
vcoubard 1132:692ddf04fc42 488 }
vcoubard 1132:692ddf04fc42 489
vcoubard 1132:692ddf04fc42 490 /**
vcoubard 1132:692ddf04fc42 491 * @return Read back advertising data. Useful for storing and
vcoubard 1132:692ddf04fc42 492 * restoring payload.
vcoubard 1132:692ddf04fc42 493 *
vcoubard 1157:e1ea38b576c6 494 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 495 * ble.getAdvertisingData(...) should be replaced with
vcoubard 1157:e1ea38b576c6 496 * ble.gap().getAdvertisingPayload()(...).
vcoubard 1132:692ddf04fc42 497 */
vcoubard 1132:692ddf04fc42 498 const GapAdvertisingData &getAdvertisingData(void) const {
vcoubard 1132:692ddf04fc42 499 return gap().getAdvertisingPayload();
vcoubard 1132:692ddf04fc42 500 }
vcoubard 1132:692ddf04fc42 501
vcoubard 1132:692ddf04fc42 502 /**
vcoubard 1132:692ddf04fc42 503 * Reset any advertising payload prepared from prior calls to
vcoubard 1132:692ddf04fc42 504 * accumulateAdvertisingPayload(). This automatically propagates the re-
vcoubard 1132:692ddf04fc42 505 * initialized advertising payload to the underlying stack.
vcoubard 1132:692ddf04fc42 506 *
vcoubard 1157:e1ea38b576c6 507 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 508 * ble.clearAdvertisingPayload(...) should be replaced with
vcoubard 1157:e1ea38b576c6 509 * ble.gap().clearAdvertisingPayload(...).
vcoubard 1132:692ddf04fc42 510 */
vcoubard 1132:692ddf04fc42 511 void clearAdvertisingPayload(void) {
vcoubard 1132:692ddf04fc42 512 gap().clearAdvertisingPayload();
vcoubard 1132:692ddf04fc42 513 }
vcoubard 1132:692ddf04fc42 514
vcoubard 1132:692ddf04fc42 515 /**
vcoubard 1157:e1ea38b576c6 516 * Dynamically reset the accumulated advertising
vcoubard 1157:e1ea38b576c6 517 * payload and scanResponse. The application must clear and re-
vcoubard 1157:e1ea38b576c6 518 * accumulates a new advertising payload (and scanResponse) before using this
vcoubard 1157:e1ea38b576c6 519 * API.
vcoubard 1132:692ddf04fc42 520 *
vcoubard 1157:e1ea38b576c6 521 * @return BLE_ERROR_NONE when the advertising payload is set successfully.
vcoubard 1157:e1ea38b576c6 522 *
vcoubard 1157:e1ea38b576c6 523 * @deprecated You should use the parallel API from Gap directly.
vcoubard 1157:e1ea38b576c6 524 *
vcoubard 1157:e1ea38b576c6 525 * @note The new APIs in Gap update the underlying advertisement payload
vcoubard 1132:692ddf04fc42 526 * implicitly.
vcoubard 1132:692ddf04fc42 527 */
vcoubard 1132:692ddf04fc42 528 ble_error_t setAdvertisingPayload(void) {
vcoubard 1132:692ddf04fc42 529 return BLE_ERROR_NONE;
vcoubard 1132:692ddf04fc42 530 }
vcoubard 1132:692ddf04fc42 531
vcoubard 1132:692ddf04fc42 532 /**
vcoubard 1132:692ddf04fc42 533 * Accumulate a variable length byte-stream as an AD structure in the
vcoubard 1132:692ddf04fc42 534 * scanResponse payload.
vcoubard 1132:692ddf04fc42 535 *
vcoubard 1132:692ddf04fc42 536 * @param[in] type The type that describes the variable length data.
vcoubard 1132:692ddf04fc42 537 * @param[in] data Data bytes.
vcoubard 1132:692ddf04fc42 538 * @param[in] len Data length.
vcoubard 1132:692ddf04fc42 539 *
vcoubard 1157:e1ea38b576c6 540 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 541 * ble.accumulateScanResponse(...) should be replaced with
vcoubard 1157:e1ea38b576c6 542 * ble.gap().accumulateScanResponse(...).
vcoubard 1132:692ddf04fc42 543 */
vcoubard 1132:692ddf04fc42 544 ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
vcoubard 1132:692ddf04fc42 545 return gap().accumulateScanResponse(type, data, len);
vcoubard 1132:692ddf04fc42 546 }
vcoubard 1132:692ddf04fc42 547
vcoubard 1132:692ddf04fc42 548 /**
vcoubard 1132:692ddf04fc42 549 * Reset any scan response prepared from prior calls to
vcoubard 1132:692ddf04fc42 550 * accumulateScanResponse().
vcoubard 1132:692ddf04fc42 551 *
vcoubard 1157:e1ea38b576c6 552 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 553 * ble.clearScanResponse(...) should be replaced with
vcoubard 1157:e1ea38b576c6 554 * ble.gap().clearScanResponse(...).
vcoubard 1132:692ddf04fc42 555 */
vcoubard 1132:692ddf04fc42 556 void clearScanResponse(void) {
vcoubard 1132:692ddf04fc42 557 gap().clearScanResponse();
vcoubard 1132:692ddf04fc42 558 }
vcoubard 1132:692ddf04fc42 559
vcoubard 1132:692ddf04fc42 560 /**
vcoubard 1132:692ddf04fc42 561 * Start advertising.
vcoubard 1132:692ddf04fc42 562 *
vcoubard 1157:e1ea38b576c6 563 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 564 * ble.startAdvertising(...) should be replaced with
vcoubard 1157:e1ea38b576c6 565 * ble.gap().startAdvertising(...).
vcoubard 1132:692ddf04fc42 566 */
vcoubard 1132:692ddf04fc42 567 ble_error_t startAdvertising(void) {
vcoubard 1132:692ddf04fc42 568 return gap().startAdvertising();
vcoubard 1132:692ddf04fc42 569 }
vcoubard 1132:692ddf04fc42 570
vcoubard 1132:692ddf04fc42 571 /**
vcoubard 1132:692ddf04fc42 572 * Stop advertising.
vcoubard 1132:692ddf04fc42 573 *
vcoubard 1157:e1ea38b576c6 574 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 575 * ble.stopAdvertising(...) should be replaced with
vcoubard 1157:e1ea38b576c6 576 * ble.gap().stopAdvertising(...).
vcoubard 1132:692ddf04fc42 577 */
vcoubard 1132:692ddf04fc42 578 ble_error_t stopAdvertising(void) {
vcoubard 1132:692ddf04fc42 579 return gap().stopAdvertising();
vcoubard 1132:692ddf04fc42 580 }
vcoubard 1132:692ddf04fc42 581
vcoubard 1132:692ddf04fc42 582 /**
vcoubard 1132:692ddf04fc42 583 * Set up parameters for GAP scanning (observer mode).
vcoubard 1132:692ddf04fc42 584 * @param[in] interval
vcoubard 1132:692ddf04fc42 585 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard 1132:692ddf04fc42 586 * @param[in] window
vcoubard 1132:692ddf04fc42 587 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard 1132:692ddf04fc42 588 * @param[in] timeout
vcoubard 1132:692ddf04fc42 589 * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables timeout.
vcoubard 1132:692ddf04fc42 590 * @param[in] activeScanning
vcoubard 1132:692ddf04fc42 591 * Set to True if active-scanning is required. This is used to fetch the
vcoubard 1132:692ddf04fc42 592 * scan response from a peer if possible.
vcoubard 1132:692ddf04fc42 593 *
vcoubard 1132:692ddf04fc42 594 * The scanning window divided by the interval determines the duty cycle for
vcoubard 1132:692ddf04fc42 595 * scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard 1132:692ddf04fc42 596 * then the controller will scan for 10 percent of the time. It is possible
vcoubard 1132:692ddf04fc42 597 * to have the interval and window set to the same value. In this case,
vcoubard 1132:692ddf04fc42 598 * scanning is continuous, with a change of scanning frequency once every
vcoubard 1132:692ddf04fc42 599 * interval.
vcoubard 1132:692ddf04fc42 600 *
vcoubard 1132:692ddf04fc42 601 * Once the scanning parameters have been configured, scanning can be
vcoubard 1132:692ddf04fc42 602 * enabled by using startScan().
vcoubard 1132:692ddf04fc42 603 *
vcoubard 1157:e1ea38b576c6 604 * @note The scan interval and window are recommendations to the BLE stack.
vcoubard 1132:692ddf04fc42 605 *
vcoubard 1157:e1ea38b576c6 606 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 607 * ble.setScanParams(...) should be replaced with
vcoubard 1157:e1ea38b576c6 608 * ble.gap().setScanParams(...).
vcoubard 1132:692ddf04fc42 609 */
vcoubard 1132:692ddf04fc42 610 ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
vcoubard 1132:692ddf04fc42 611 uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
vcoubard 1132:692ddf04fc42 612 uint16_t timeout = 0,
vcoubard 1132:692ddf04fc42 613 bool activeScanning = false) {
vcoubard 1132:692ddf04fc42 614 return gap().setScanParams(interval, window, timeout, activeScanning);
vcoubard 1132:692ddf04fc42 615 }
vcoubard 1132:692ddf04fc42 616
vcoubard 1132:692ddf04fc42 617 /**
vcoubard 1132:692ddf04fc42 618 * Set up the scanInterval parameter for GAP scanning (observer mode).
vcoubard 1132:692ddf04fc42 619 * @param[in] interval
vcoubard 1132:692ddf04fc42 620 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard 1132:692ddf04fc42 621 *
vcoubard 1132:692ddf04fc42 622 * The scanning window divided by the interval determines the duty cycle for
vcoubard 1132:692ddf04fc42 623 * scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard 1132:692ddf04fc42 624 * then the controller will scan for 10 percent of the time. It is possible
vcoubard 1132:692ddf04fc42 625 * to have the interval and window set to the same value. In this case,
vcoubard 1132:692ddf04fc42 626 * scanning is continuous, with a change of scanning frequency once every
vcoubard 1132:692ddf04fc42 627 * interval.
vcoubard 1132:692ddf04fc42 628 *
vcoubard 1132:692ddf04fc42 629 * Once the scanning parameters have been configured, scanning can be
vcoubard 1132:692ddf04fc42 630 * enabled by using startScan().
vcoubard 1132:692ddf04fc42 631 *
vcoubard 1157:e1ea38b576c6 632 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 633 * ble.setScanInterval(interval) should be replaced with
vcoubard 1157:e1ea38b576c6 634 * ble.gap().setScanInterval(interval).
vcoubard 1132:692ddf04fc42 635 */
vcoubard 1132:692ddf04fc42 636 ble_error_t setScanInterval(uint16_t interval) {
vcoubard 1132:692ddf04fc42 637 return gap().setScanInterval(interval);
vcoubard 1132:692ddf04fc42 638 }
vcoubard 1132:692ddf04fc42 639
vcoubard 1132:692ddf04fc42 640 /**
vcoubard 1132:692ddf04fc42 641 * Set up the scanWindow parameter for GAP scanning (observer mode).
vcoubard 1132:692ddf04fc42 642 * @param[in] window
vcoubard 1132:692ddf04fc42 643 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard 1132:692ddf04fc42 644 *
vcoubard 1132:692ddf04fc42 645 * The scanning window divided by the interval determines the duty cycle for
vcoubard 1132:692ddf04fc42 646 * scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard 1132:692ddf04fc42 647 * then the controller will scan for 10 percent of the time. It is possible
vcoubard 1132:692ddf04fc42 648 * to have the interval and window set to the same value. In this case,
vcoubard 1132:692ddf04fc42 649 * scanning is continuous, with a change of scanning frequency once every
vcoubard 1132:692ddf04fc42 650 * interval.
vcoubard 1132:692ddf04fc42 651 *
vcoubard 1132:692ddf04fc42 652 * Once the scanning parameters have been configured, scanning can be
vcoubard 1132:692ddf04fc42 653 * enabled by using startScan().
vcoubard 1132:692ddf04fc42 654 *
vcoubard 1157:e1ea38b576c6 655 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 656 * ble.setScanWindow(window) should be replaced with
vcoubard 1157:e1ea38b576c6 657 * ble.gap().setScanWindow(window).
vcoubard 1132:692ddf04fc42 658 */
vcoubard 1132:692ddf04fc42 659 ble_error_t setScanWindow(uint16_t window) {
vcoubard 1132:692ddf04fc42 660 return gap().setScanWindow(window);
vcoubard 1132:692ddf04fc42 661 }
vcoubard 1132:692ddf04fc42 662
vcoubard 1132:692ddf04fc42 663 /**
vcoubard 1132:692ddf04fc42 664 * Set up parameters for GAP scanning (observer mode).
vcoubard 1132:692ddf04fc42 665 * @param[in] timeout
vcoubard 1132:692ddf04fc42 666 * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables timeout.
vcoubard 1132:692ddf04fc42 667 *
vcoubard 1132:692ddf04fc42 668 * The scanning window divided by the interval determines the duty cycle for
vcoubard 1132:692ddf04fc42 669 * scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard 1132:692ddf04fc42 670 * then the controller will scan for 10 percent of the time. It is possible
vcoubard 1132:692ddf04fc42 671 * to have the interval and window set to the same value. In this case,
vcoubard 1132:692ddf04fc42 672 * scanning is continuous, with a change of scanning frequency once every
vcoubard 1132:692ddf04fc42 673 * interval.
vcoubard 1132:692ddf04fc42 674 *
vcoubard 1132:692ddf04fc42 675 * Once the scanning parameters have been configured, scanning can be
vcoubard 1132:692ddf04fc42 676 * enabled by using startScan().
vcoubard 1132:692ddf04fc42 677 *
vcoubard 1157:e1ea38b576c6 678 * @note The scan interval and window are recommendations to the BLE stack.
vcoubard 1132:692ddf04fc42 679 *
vcoubard 1157:e1ea38b576c6 680 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 681 * ble.setScanTimeout(...) should be replaced with
vcoubard 1157:e1ea38b576c6 682 * ble.gap().setScanTimeout(...).
vcoubard 1132:692ddf04fc42 683 */
vcoubard 1132:692ddf04fc42 684 ble_error_t setScanTimeout(uint16_t timeout) {
vcoubard 1132:692ddf04fc42 685 return gap().setScanTimeout(timeout);
vcoubard 1132:692ddf04fc42 686 }
vcoubard 1132:692ddf04fc42 687
vcoubard 1132:692ddf04fc42 688 /**
vcoubard 1132:692ddf04fc42 689 * Set up parameters for GAP scanning (observer mode).
vcoubard 1132:692ddf04fc42 690 * @param[in] activeScanning
vcoubard 1132:692ddf04fc42 691 * Set to True if active-scanning is required. This is used to fetch the
vcoubard 1132:692ddf04fc42 692 * scan response from a peer if possible.
vcoubard 1132:692ddf04fc42 693 *
vcoubard 1132:692ddf04fc42 694 * Once the scanning parameters have been configured, scanning can be
vcoubard 1132:692ddf04fc42 695 * enabled by using startScan().
vcoubard 1132:692ddf04fc42 696 *
vcoubard 1157:e1ea38b576c6 697 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 698 * ble.setActiveScan(...) should be replaced with
vcoubard 1157:e1ea38b576c6 699 * ble.gap().setActiveScanning(...).
vcoubard 1132:692ddf04fc42 700 */
vcoubard 1132:692ddf04fc42 701 void setActiveScan(bool activeScanning) {
vcoubard 1132:692ddf04fc42 702 gap().setActiveScanning(activeScanning);
vcoubard 1132:692ddf04fc42 703 }
vcoubard 1132:692ddf04fc42 704
vcoubard 1132:692ddf04fc42 705 /**
vcoubard 1132:692ddf04fc42 706 * Start scanning (Observer Procedure) based on the parameters currently in
vcoubard 1132:692ddf04fc42 707 * effect.
vcoubard 1132:692ddf04fc42 708 *
vcoubard 1132:692ddf04fc42 709 * @param[in] callback
vcoubard 1132:692ddf04fc42 710 * The application-specific callback to be invoked upon
vcoubard 1132:692ddf04fc42 711 * receiving every advertisement report. This can be passed in
vcoubard 1132:692ddf04fc42 712 * as NULL, in which case scanning may not be enabled at all.
vcoubard 1132:692ddf04fc42 713 *
vcoubard 1157:e1ea38b576c6 714 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 715 * ble.startScan(callback) should be replaced with
vcoubard 1157:e1ea38b576c6 716 * ble.gap().startScan(callback).
vcoubard 1132:692ddf04fc42 717 */
vcoubard 1132:692ddf04fc42 718 ble_error_t startScan(void (*callback)(const Gap::AdvertisementCallbackParams_t *params)) {
vcoubard 1132:692ddf04fc42 719 return gap().startScan(callback);
vcoubard 1132:692ddf04fc42 720 }
vcoubard 1132:692ddf04fc42 721
vcoubard 1132:692ddf04fc42 722 /**
vcoubard 1132:692ddf04fc42 723 * Same as above, but this takes an (object, method) pair for a callback.
vcoubard 1132:692ddf04fc42 724 *
vcoubard 1157:e1ea38b576c6 725 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 726 * ble.startScan(callback) should be replaced with
vcoubard 1157:e1ea38b576c6 727 * ble.gap().startScan(object, callback).
vcoubard 1132:692ddf04fc42 728 */
vcoubard 1132:692ddf04fc42 729 template<typename T>
vcoubard 1132:692ddf04fc42 730 ble_error_t startScan(T *object, void (T::*memberCallback)(const Gap::AdvertisementCallbackParams_t *params));
vcoubard 1132:692ddf04fc42 731
vcoubard 1132:692ddf04fc42 732 /**
vcoubard 1132:692ddf04fc42 733 * Stop scanning. The current scanning parameters remain in effect.
vcoubard 1132:692ddf04fc42 734 *
vcoubard 1132:692ddf04fc42 735 * @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
vcoubard 1132:692ddf04fc42 736 *
vcoubard 1157:e1ea38b576c6 737 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 738 * ble.stopScan() should be replaced with
vcoubard 1157:e1ea38b576c6 739 * ble.gap().stopScan().
vcoubard 1132:692ddf04fc42 740 */
vcoubard 1132:692ddf04fc42 741 ble_error_t stopScan(void) {
vcoubard 1132:692ddf04fc42 742 return gap().stopScan();
vcoubard 1132:692ddf04fc42 743 }
vcoubard 1132:692ddf04fc42 744
vcoubard 1132:692ddf04fc42 745 /**
vcoubard 1132:692ddf04fc42 746 * Create a connection (GAP Link Establishment).
vcoubard 1132:692ddf04fc42 747 * @param peerAddr
vcoubard 1132:692ddf04fc42 748 * 48-bit address, LSB format.
vcoubard 1132:692ddf04fc42 749 * @param peerAddrType
vcoubard 1132:692ddf04fc42 750 * Address type of the peer.
vcoubard 1132:692ddf04fc42 751 * @param connectionParams
vcoubard 1132:692ddf04fc42 752 * Connection parameters.
vcoubard 1132:692ddf04fc42 753 * @param scanParams
vcoubard 1132:692ddf04fc42 754 * Paramters to use while scanning for the peer.
vcoubard 1132:692ddf04fc42 755 * @return BLE_ERROR_NONE if connection establishment procedure is started
vcoubard 1132:692ddf04fc42 756 * successfully. The onConnection callback (if set) is invoked upon
vcoubard 1132:692ddf04fc42 757 * a connection event.
vcoubard 1132:692ddf04fc42 758 *
vcoubard 1157:e1ea38b576c6 759 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 760 * ble.connect(...) should be replaced with
vcoubard 1157:e1ea38b576c6 761 * ble.gap().connect(...).
vcoubard 1132:692ddf04fc42 762 */
vcoubard 1136:22aada733dbd 763 ble_error_t connect(const BLEProtocol::AddressBytes_t peerAddr,
vcoubard 1136:22aada733dbd 764 BLEProtocol::AddressType_t peerAddrType = BLEProtocol::AddressType::RANDOM_STATIC,
vcoubard 1136:22aada733dbd 765 const Gap::ConnectionParams_t *connectionParams = NULL,
vcoubard 1136:22aada733dbd 766 const GapScanningParams *scanParams = NULL) {
vcoubard 1132:692ddf04fc42 767 return gap().connect(peerAddr, peerAddrType, connectionParams, scanParams);
vcoubard 1132:692ddf04fc42 768 }
vcoubard 1132:692ddf04fc42 769
vcoubard 1132:692ddf04fc42 770 /**
vcoubard 1132:692ddf04fc42 771 * This call initiates the disconnection procedure, and its completion is
vcoubard 1132:692ddf04fc42 772 * communicated to the application with an invocation of the
vcoubard 1132:692ddf04fc42 773 * onDisconnection callback.
vcoubard 1132:692ddf04fc42 774 *
vcoubard 1132:692ddf04fc42 775 * @param[in] connectionHandle
vcoubard 1132:692ddf04fc42 776 * @param[in] reason
vcoubard 1132:692ddf04fc42 777 * The reason for disconnection; sent back to the peer.
vcoubard 1132:692ddf04fc42 778 */
vcoubard 1132:692ddf04fc42 779 ble_error_t disconnect(Gap::Handle_t connectionHandle, Gap::DisconnectionReason_t reason) {
vcoubard 1132:692ddf04fc42 780 return gap().disconnect(connectionHandle, reason);
vcoubard 1132:692ddf04fc42 781 }
vcoubard 1132:692ddf04fc42 782
vcoubard 1132:692ddf04fc42 783 /**
vcoubard 1136:22aada733dbd 784 * This call initiates the disconnection procedure, and its completion
vcoubard 1132:692ddf04fc42 785 * is communicated to the application with an invocation of the
vcoubard 1132:692ddf04fc42 786 * onDisconnection callback.
vcoubard 1132:692ddf04fc42 787 *
vcoubard 1132:692ddf04fc42 788 * @param reason
vcoubard 1132:692ddf04fc42 789 * The reason for disconnection; sent back to the peer.
vcoubard 1132:692ddf04fc42 790 *
vcoubard 1157:e1ea38b576c6 791 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 792 * ble.disconnect(reason) should be replaced with
vcoubard 1157:e1ea38b576c6 793 * ble.gap().disconnect(reason).
vcoubard 1132:692ddf04fc42 794 *
vcoubard 1157:e1ea38b576c6 795 * @note This version of disconnect() doesn't take a connection handle. It
vcoubard 1132:692ddf04fc42 796 * works reliably only for stacks that are limited to a single
vcoubard 1157:e1ea38b576c6 797 * connection.
vcoubard 1157:e1ea38b576c6 798 *
vcoubard 1157:e1ea38b576c6 799 * @deprecated You should use the parallel API from Gap directly.
vcoubard 1132:692ddf04fc42 800 */
vcoubard 1132:692ddf04fc42 801 ble_error_t disconnect(Gap::DisconnectionReason_t reason) {
vcoubard 1132:692ddf04fc42 802 return gap().disconnect(reason);
vcoubard 1132:692ddf04fc42 803 }
vcoubard 1132:692ddf04fc42 804
vcoubard 1132:692ddf04fc42 805 /**
vcoubard 1157:e1ea38b576c6 806 * Returns the current Gap state of the device using a bitmask that
vcoubard 1132:692ddf04fc42 807 * describes whether the device is advertising or connected.
vcoubard 1132:692ddf04fc42 808 *
vcoubard 1157:e1ea38b576c6 809 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 810 * ble.getGapState() should be replaced with
vcoubard 1157:e1ea38b576c6 811 * ble.gap().getState().
vcoubard 1132:692ddf04fc42 812 */
vcoubard 1132:692ddf04fc42 813 Gap::GapState_t getGapState(void) const {
vcoubard 1132:692ddf04fc42 814 return gap().getState();
vcoubard 1132:692ddf04fc42 815 }
vcoubard 1132:692ddf04fc42 816
vcoubard 1132:692ddf04fc42 817 /**
vcoubard 1132:692ddf04fc42 818 * Get the GAP peripheral's preferred connection parameters. These are the
vcoubard 1132:692ddf04fc42 819 * defaults that the peripheral would like to have in a connection. The
vcoubard 1132:692ddf04fc42 820 * choice of the connection parameters is eventually up to the central.
vcoubard 1132:692ddf04fc42 821 *
vcoubard 1132:692ddf04fc42 822 * @param[out] params
vcoubard 1132:692ddf04fc42 823 * The structure where the parameters will be stored. Memory
vcoubard 1132:692ddf04fc42 824 * for this is owned by the caller.
vcoubard 1132:692ddf04fc42 825 *
vcoubard 1132:692ddf04fc42 826 * @return BLE_ERROR_NONE if the parameters were successfully filled into
vcoubard 1132:692ddf04fc42 827 * the given structure pointed to by params.
vcoubard 1132:692ddf04fc42 828 *
vcoubard 1157:e1ea38b576c6 829 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 830 * ble.getPreferredConnectionParams() should be replaced with
vcoubard 1157:e1ea38b576c6 831 * ble.gap().getPreferredConnectionParams().
vcoubard 1132:692ddf04fc42 832 */
vcoubard 1132:692ddf04fc42 833 ble_error_t getPreferredConnectionParams(Gap::ConnectionParams_t *params) {
vcoubard 1132:692ddf04fc42 834 return gap().getPreferredConnectionParams(params);
vcoubard 1132:692ddf04fc42 835 }
vcoubard 1132:692ddf04fc42 836
vcoubard 1132:692ddf04fc42 837 /**
vcoubard 1132:692ddf04fc42 838 * Set the GAP peripheral's preferred connection parameters. These are the
vcoubard 1132:692ddf04fc42 839 * defaults that the peripheral would like to have in a connection. The
vcoubard 1132:692ddf04fc42 840 * choice of the connection parameters is eventually up to the central.
vcoubard 1132:692ddf04fc42 841 *
vcoubard 1132:692ddf04fc42 842 * @param[in] params
vcoubard 1132:692ddf04fc42 843 * The structure containing the desired parameters.
vcoubard 1132:692ddf04fc42 844 *
vcoubard 1157:e1ea38b576c6 845 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 846 * ble.setPreferredConnectionParams() should be replaced with
vcoubard 1157:e1ea38b576c6 847 * ble.gap().setPreferredConnectionParams().
vcoubard 1132:692ddf04fc42 848 */
vcoubard 1132:692ddf04fc42 849 ble_error_t setPreferredConnectionParams(const Gap::ConnectionParams_t *params) {
vcoubard 1132:692ddf04fc42 850 return gap().setPreferredConnectionParams(params);
vcoubard 1132:692ddf04fc42 851 }
vcoubard 1132:692ddf04fc42 852
vcoubard 1132:692ddf04fc42 853 /**
vcoubard 1132:692ddf04fc42 854 * Update connection parameters while in the peripheral role.
vcoubard 1132:692ddf04fc42 855 * @details In the peripheral role, this will send the corresponding L2CAP request to the connected peer and wait for
vcoubard 1132:692ddf04fc42 856 * the central to perform the procedure.
vcoubard 1132:692ddf04fc42 857 * @param[in] handle
vcoubard 1132:692ddf04fc42 858 * Connection Handle
vcoubard 1132:692ddf04fc42 859 * @param[in] params
vcoubard 1132:692ddf04fc42 860 * Pointer to desired connection parameters. If NULL is provided on a peripheral role,
vcoubard 1132:692ddf04fc42 861 * the parameters in the PPCP characteristic of the GAP service will be used instead.
vcoubard 1132:692ddf04fc42 862 *
vcoubard 1157:e1ea38b576c6 863 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 864 * ble.updateConnectionParams() should be replaced with
vcoubard 1157:e1ea38b576c6 865 * ble.gap().updateConnectionParams().
vcoubard 1132:692ddf04fc42 866 */
vcoubard 1132:692ddf04fc42 867 ble_error_t updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params) {
vcoubard 1132:692ddf04fc42 868 return gap().updateConnectionParams(handle, params);
vcoubard 1132:692ddf04fc42 869 }
vcoubard 1132:692ddf04fc42 870
vcoubard 1132:692ddf04fc42 871 /**
vcoubard 1157:e1ea38b576c6 872 * Set the device name characteristic in the Gap service.
vcoubard 1132:692ddf04fc42 873 * @param[in] deviceName
vcoubard 1132:692ddf04fc42 874 * The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
vcoubard 1132:692ddf04fc42 875 *
vcoubard 1157:e1ea38b576c6 876 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 877 * ble.setDeviceName() should be replaced with
vcoubard 1157:e1ea38b576c6 878 * ble.gap().setDeviceName().
vcoubard 1132:692ddf04fc42 879 */
vcoubard 1132:692ddf04fc42 880 ble_error_t setDeviceName(const uint8_t *deviceName) {
vcoubard 1132:692ddf04fc42 881 return gap().setDeviceName(deviceName);
vcoubard 1132:692ddf04fc42 882 }
vcoubard 1132:692ddf04fc42 883
vcoubard 1132:692ddf04fc42 884 /**
vcoubard 1157:e1ea38b576c6 885 * Get the value of the device name characteristic in the Gap service.
vcoubard 1132:692ddf04fc42 886 * @param[out] deviceName
vcoubard 1132:692ddf04fc42 887 * Pointer to an empty buffer where the UTF-8 *non NULL-
vcoubard 1132:692ddf04fc42 888 * terminated* string will be placed. Set this
vcoubard 1132:692ddf04fc42 889 * value to NULL in order to obtain the deviceName-length
vcoubard 1132:692ddf04fc42 890 * from the 'length' parameter.
vcoubard 1132:692ddf04fc42 891 *
vcoubard 1157:e1ea38b576c6 892 * @param[in,out] lengthP
vcoubard 1132:692ddf04fc42 893 * (on input) Length of the buffer pointed to by deviceName;
vcoubard 1132:692ddf04fc42 894 * (on output) the complete device name length (without the
vcoubard 1132:692ddf04fc42 895 * null terminator).
vcoubard 1132:692ddf04fc42 896 *
vcoubard 1132:692ddf04fc42 897 * @note If the device name is longer than the size of the supplied buffer,
vcoubard 1132:692ddf04fc42 898 * length will return the complete device name length, and not the
vcoubard 1132:692ddf04fc42 899 * number of bytes actually returned in deviceName. The application may
vcoubard 1132:692ddf04fc42 900 * use this information to retry with a suitable buffer size.
vcoubard 1132:692ddf04fc42 901 *
vcoubard 1157:e1ea38b576c6 902 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 903 * ble.getDeviceName() should be replaced with
vcoubard 1157:e1ea38b576c6 904 * ble.gap().getDeviceName().
vcoubard 1132:692ddf04fc42 905 */
vcoubard 1132:692ddf04fc42 906 ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
vcoubard 1132:692ddf04fc42 907 return gap().getDeviceName(deviceName, lengthP);
vcoubard 1132:692ddf04fc42 908 }
vcoubard 1132:692ddf04fc42 909
vcoubard 1132:692ddf04fc42 910 /**
vcoubard 1157:e1ea38b576c6 911 * Set the appearance characteristic in the Gap service.
vcoubard 1132:692ddf04fc42 912 * @param[in] appearance
vcoubard 1132:692ddf04fc42 913 * The new value for the device-appearance.
vcoubard 1132:692ddf04fc42 914 *
vcoubard 1157:e1ea38b576c6 915 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 916 * ble.setAppearance() should be replaced with
vcoubard 1157:e1ea38b576c6 917 * ble.gap().setAppearance().
vcoubard 1132:692ddf04fc42 918 */
vcoubard 1132:692ddf04fc42 919 ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
vcoubard 1132:692ddf04fc42 920 return gap().setAppearance(appearance);
vcoubard 1132:692ddf04fc42 921 }
vcoubard 1132:692ddf04fc42 922
vcoubard 1132:692ddf04fc42 923 /**
vcoubard 1157:e1ea38b576c6 924 * Get the appearance characteristic in the Gap service.
vcoubard 1157:e1ea38b576c6 925 * @param[out] appearanceP
vcoubard 1132:692ddf04fc42 926 * The new value for the device-appearance.
vcoubard 1132:692ddf04fc42 927 *
vcoubard 1157:e1ea38b576c6 928 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 929 * ble.getAppearance() should be replaced with
vcoubard 1157:e1ea38b576c6 930 * ble.gap().getAppearance().
vcoubard 1132:692ddf04fc42 931 */
vcoubard 1132:692ddf04fc42 932 ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
vcoubard 1132:692ddf04fc42 933 return gap().getAppearance(appearanceP);
vcoubard 1132:692ddf04fc42 934 }
vcoubard 1132:692ddf04fc42 935
vcoubard 1132:692ddf04fc42 936 /**
vcoubard 1132:692ddf04fc42 937 * Set the radio's transmit power.
vcoubard 1132:692ddf04fc42 938 * @param[in] txPower Radio transmit power in dBm.
vcoubard 1132:692ddf04fc42 939 *
vcoubard 1157:e1ea38b576c6 940 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 941 * ble.setTxPower() should be replaced with
vcoubard 1157:e1ea38b576c6 942 * ble.gap().setTxPower().
vcoubard 1132:692ddf04fc42 943 */
vcoubard 1132:692ddf04fc42 944 ble_error_t setTxPower(int8_t txPower) {
vcoubard 1132:692ddf04fc42 945 return gap().setTxPower(txPower);
vcoubard 1132:692ddf04fc42 946 }
vcoubard 1132:692ddf04fc42 947
vcoubard 1132:692ddf04fc42 948 /**
vcoubard 1132:692ddf04fc42 949 * Query the underlying stack for permitted arguments for setTxPower().
vcoubard 1132:692ddf04fc42 950 *
vcoubard 1132:692ddf04fc42 951 * @param[out] valueArrayPP
vcoubard 1132:692ddf04fc42 952 * Out parameter to receive the immutable array of Tx values.
vcoubard 1132:692ddf04fc42 953 * @param[out] countP
vcoubard 1132:692ddf04fc42 954 * Out parameter to receive the array's size.
vcoubard 1132:692ddf04fc42 955 *
vcoubard 1157:e1ea38b576c6 956 * @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard 1157:e1ea38b576c6 957 * ble.getPermittedTxPowerValues() should be replaced with
vcoubard 1157:e1ea38b576c6 958 * ble.gap().getPermittedTxPowerValues().
vcoubard 1132:692ddf04fc42 959 */
vcoubard 1132:692ddf04fc42 960 void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) {
vcoubard 1132:692ddf04fc42 961 gap().getPermittedTxPowerValues(valueArrayPP, countP);
vcoubard 1132:692ddf04fc42 962 }
vcoubard 1132:692ddf04fc42 963
vcoubard 1132:692ddf04fc42 964 /**
vcoubard 1132:692ddf04fc42 965 * Add a service declaration to the local server ATT table. Also add the
vcoubard 1132:692ddf04fc42 966 * characteristics contained within.
vcoubard 1132:692ddf04fc42 967 *
vcoubard 1157:e1ea38b576c6 968 * @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard 1157:e1ea38b576c6 969 * to ble.addService() should be replaced with
vcoubard 1157:e1ea38b576c6 970 * ble.gattServer().addService().
vcoubard 1132:692ddf04fc42 971 */
vcoubard 1132:692ddf04fc42 972 ble_error_t addService(GattService &service) {
vcoubard 1132:692ddf04fc42 973 return gattServer().addService(service);
vcoubard 1132:692ddf04fc42 974 }
vcoubard 1132:692ddf04fc42 975
vcoubard 1132:692ddf04fc42 976 /**
vcoubard 1132:692ddf04fc42 977 * Read the value of a characteristic from the local GattServer.
vcoubard 1132:692ddf04fc42 978 * @param[in] attributeHandle
vcoubard 1132:692ddf04fc42 979 * Attribute handle for the value attribute of the characteristic.
vcoubard 1132:692ddf04fc42 980 * @param[out] buffer
vcoubard 1132:692ddf04fc42 981 * A buffer to hold the value being read.
vcoubard 1157:e1ea38b576c6 982 * @param[in,out] lengthP
vcoubard 1132:692ddf04fc42 983 * Length of the buffer being supplied. If the attribute
vcoubard 1132:692ddf04fc42 984 * value is longer than the size of the supplied buffer,
vcoubard 1132:692ddf04fc42 985 * this variable will return the total attribute value length
vcoubard 1132:692ddf04fc42 986 * (excluding offset). The application may use this
vcoubard 1132:692ddf04fc42 987 * information to allocate a suitable buffer size.
vcoubard 1132:692ddf04fc42 988 *
vcoubard 1132:692ddf04fc42 989 * @return BLE_ERROR_NONE if a value was read successfully into the buffer.
vcoubard 1132:692ddf04fc42 990 *
vcoubard 1157:e1ea38b576c6 991 * @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard 1157:e1ea38b576c6 992 * to ble.readCharacteristicValue() should be replaced with
vcoubard 1157:e1ea38b576c6 993 * ble.gattServer().read().
vcoubard 1132:692ddf04fc42 994 */
vcoubard 1132:692ddf04fc42 995 ble_error_t readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
vcoubard 1132:692ddf04fc42 996 return gattServer().read(attributeHandle, buffer, lengthP);
vcoubard 1132:692ddf04fc42 997 }
vcoubard 1132:692ddf04fc42 998
vcoubard 1132:692ddf04fc42 999 /**
vcoubard 1132:692ddf04fc42 1000 * Read the value of a characteristic from the local GattServer.
vcoubard 1132:692ddf04fc42 1001 * @param[in] connectionHandle
vcoubard 1132:692ddf04fc42 1002 * Connection Handle.
vcoubard 1132:692ddf04fc42 1003 * @param[in] attributeHandle
vcoubard 1132:692ddf04fc42 1004 * Attribute handle for the value attribute of the characteristic.
vcoubard 1132:692ddf04fc42 1005 * @param[out] buffer
vcoubard 1132:692ddf04fc42 1006 * A buffer to hold the value being read.
vcoubard 1157:e1ea38b576c6 1007 * @param[in,out] lengthP
vcoubard 1132:692ddf04fc42 1008 * Length of the buffer being supplied. If the attribute
vcoubard 1132:692ddf04fc42 1009 * value is longer than the size of the supplied buffer,
vcoubard 1132:692ddf04fc42 1010 * this variable will return the total attribute value length
vcoubard 1132:692ddf04fc42 1011 * (excluding offset). The application may use this
vcoubard 1132:692ddf04fc42 1012 * information to allocate a suitable buffer size.
vcoubard 1132:692ddf04fc42 1013 *
vcoubard 1132:692ddf04fc42 1014 * @return BLE_ERROR_NONE if a value was read successfully into the buffer.
vcoubard 1132:692ddf04fc42 1015 *
vcoubard 1132:692ddf04fc42 1016 * @note This API is a version of the above, with an additional connection handle
vcoubard 1132:692ddf04fc42 1017 * parameter to allow fetches for connection-specific multivalued
vcoubard 1132:692ddf04fc42 1018 * attributes (such as the CCCDs).
vcoubard 1132:692ddf04fc42 1019 *
vcoubard 1157:e1ea38b576c6 1020 * @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard 1157:e1ea38b576c6 1021 * to ble.readCharacteristicValue() should be replaced with
vcoubard 1157:e1ea38b576c6 1022 * ble.gattServer().read().
vcoubard 1132:692ddf04fc42 1023 */
vcoubard 1132:692ddf04fc42 1024 ble_error_t readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t *buffer, uint16_t *lengthP) {
vcoubard 1132:692ddf04fc42 1025 return gattServer().read(connectionHandle, attributeHandle, buffer, lengthP);
vcoubard 1132:692ddf04fc42 1026 }
vcoubard 1132:692ddf04fc42 1027
vcoubard 1132:692ddf04fc42 1028 /**
vcoubard 1132:692ddf04fc42 1029 * Update the value of a characteristic on the local GattServer.
vcoubard 1132:692ddf04fc42 1030 *
vcoubard 1132:692ddf04fc42 1031 * @param[in] attributeHandle
vcoubard 1132:692ddf04fc42 1032 * Handle for the value attribute of the characteristic.
vcoubard 1132:692ddf04fc42 1033 * @param[in] value
vcoubard 1132:692ddf04fc42 1034 * A pointer to a buffer holding the new value.
vcoubard 1132:692ddf04fc42 1035 * @param[in] size
vcoubard 1132:692ddf04fc42 1036 * Size of the new value (in bytes).
vcoubard 1132:692ddf04fc42 1037 * @param[in] localOnly
vcoubard 1132:692ddf04fc42 1038 * Should this update be kept on the local
vcoubard 1132:692ddf04fc42 1039 * GattServer regardless of the state of the
vcoubard 1132:692ddf04fc42 1040 * notify/indicate flag in the CCCD for this
vcoubard 1132:692ddf04fc42 1041 * characteristic? If set to true, no notification
vcoubard 1132:692ddf04fc42 1042 * or indication is generated.
vcoubard 1132:692ddf04fc42 1043 *
vcoubard 1132:692ddf04fc42 1044 * @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
vcoubard 1132:692ddf04fc42 1045 *
vcoubard 1157:e1ea38b576c6 1046 * @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard 1157:e1ea38b576c6 1047 * to ble.updateCharacteristicValue() should be replaced with
vcoubard 1157:e1ea38b576c6 1048 * ble.gattServer().write().
vcoubard 1132:692ddf04fc42 1049 */
vcoubard 1132:692ddf04fc42 1050 ble_error_t updateCharacteristicValue(GattAttribute::Handle_t attributeHandle,
vcoubard 1132:692ddf04fc42 1051 const uint8_t *value,
vcoubard 1132:692ddf04fc42 1052 uint16_t size,
vcoubard 1132:692ddf04fc42 1053 bool localOnly = false) {
vcoubard 1132:692ddf04fc42 1054 return gattServer().write(attributeHandle, value, size, localOnly);
vcoubard 1132:692ddf04fc42 1055 }
vcoubard 1132:692ddf04fc42 1056
vcoubard 1132:692ddf04fc42 1057 /**
vcoubard 1132:692ddf04fc42 1058 * Update the value of a characteristic on the local GattServer. A version
vcoubard 1132:692ddf04fc42 1059 * of the above, with a connection handle parameter to allow updates
vcoubard 1132:692ddf04fc42 1060 * for connection-specific multivalued attributes (such as the CCCDs).
vcoubard 1132:692ddf04fc42 1061 *
vcoubard 1132:692ddf04fc42 1062 * @param[in] connectionHandle
vcoubard 1132:692ddf04fc42 1063 * Connection Handle.
vcoubard 1132:692ddf04fc42 1064 * @param[in] attributeHandle
vcoubard 1132:692ddf04fc42 1065 * Handle for the value attribute of the Characteristic.
vcoubard 1132:692ddf04fc42 1066 * @param[in] value
vcoubard 1132:692ddf04fc42 1067 * A pointer to a buffer holding the new value.
vcoubard 1132:692ddf04fc42 1068 * @param[in] size
vcoubard 1132:692ddf04fc42 1069 * Size of the new value (in bytes).
vcoubard 1132:692ddf04fc42 1070 * @param[in] localOnly
vcoubard 1132:692ddf04fc42 1071 * Should this update be kept on the local
vcoubard 1132:692ddf04fc42 1072 * GattServer regardless of the state of the
vcoubard 1132:692ddf04fc42 1073 * notify/indicate flag in the CCCD for this
vcoubard 1132:692ddf04fc42 1074 * Characteristic? If set to true, no notification
vcoubard 1132:692ddf04fc42 1075 * or indication is generated.
vcoubard 1132:692ddf04fc42 1076 *
vcoubard 1132:692ddf04fc42 1077 * @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
vcoubard 1132:692ddf04fc42 1078 *
vcoubard 1157:e1ea38b576c6 1079 * @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard 1157:e1ea38b576c6 1080 * to ble.updateCharacteristicValue() should be replaced with
vcoubard 1157:e1ea38b576c6 1081 * ble.gattServer().write().
vcoubard 1132:692ddf04fc42 1082 */
vcoubard 1132:692ddf04fc42 1083 ble_error_t updateCharacteristicValue(Gap::Handle_t connectionHandle,
vcoubard 1132:692ddf04fc42 1084 GattAttribute::Handle_t attributeHandle,
vcoubard 1132:692ddf04fc42 1085 const uint8_t *value,
vcoubard 1132:692ddf04fc42 1086 uint16_t size,
vcoubard 1132:692ddf04fc42 1087 bool localOnly = false) {
vcoubard 1132:692ddf04fc42 1088 return gattServer().write(connectionHandle, attributeHandle, value, size, localOnly);
vcoubard 1132:692ddf04fc42 1089 }
vcoubard 1132:692ddf04fc42 1090
vcoubard 1132:692ddf04fc42 1091 /**
vcoubard 1132:692ddf04fc42 1092 * Enable the BLE stack's Security Manager. The Security Manager implements
vcoubard 1132:692ddf04fc42 1093 * the cryptographic algorithms and protocol exchanges that allow two
vcoubard 1132:692ddf04fc42 1094 * devices to securely exchange data and privately detect each other.
vcoubard 1132:692ddf04fc42 1095 * Calling this API is a prerequisite for encryption and pairing (bonding).
vcoubard 1132:692ddf04fc42 1096 *
vcoubard 1132:692ddf04fc42 1097 * @param[in] enableBonding Allow for bonding.
vcoubard 1132:692ddf04fc42 1098 * @param[in] requireMITM Require protection against man-in-the-middle attacks.
vcoubard 1132:692ddf04fc42 1099 * @param[in] iocaps To specify the I/O capabilities of this peripheral,
vcoubard 1132:692ddf04fc42 1100 * such as availability of a display or keyboard, to
vcoubard 1132:692ddf04fc42 1101 * support out-of-band exchanges of security data.
vcoubard 1132:692ddf04fc42 1102 * @param[in] passkey To specify a static passkey.
vcoubard 1132:692ddf04fc42 1103 *
vcoubard 1132:692ddf04fc42 1104 * @return BLE_ERROR_NONE on success.
vcoubard 1132:692ddf04fc42 1105 *
vcoubard 1157:e1ea38b576c6 1106 * @deprecated You should use the parallel API from SecurityManager directly. A former
vcoubard 1157:e1ea38b576c6 1107 * call to ble.initializeSecurity(...) should be replaced with
vcoubard 1157:e1ea38b576c6 1108 * ble.securityManager().init(...).
vcoubard 1132:692ddf04fc42 1109 */
vcoubard 1132:692ddf04fc42 1110 ble_error_t initializeSecurity(bool enableBonding = true,
vcoubard 1132:692ddf04fc42 1111 bool requireMITM = true,
vcoubard 1132:692ddf04fc42 1112 SecurityManager::SecurityIOCapabilities_t iocaps = SecurityManager::IO_CAPS_NONE,
vcoubard 1132:692ddf04fc42 1113 const SecurityManager::Passkey_t passkey = NULL) {
vcoubard 1132:692ddf04fc42 1114 return securityManager().init(enableBonding, requireMITM, iocaps, passkey);
vcoubard 1132:692ddf04fc42 1115 }
vcoubard 1132:692ddf04fc42 1116
vcoubard 1132:692ddf04fc42 1117 /**
vcoubard 1132:692ddf04fc42 1118 * Get the security status of a connection.
vcoubard 1132:692ddf04fc42 1119 *
vcoubard 1132:692ddf04fc42 1120 * @param[in] connectionHandle Handle to identify the connection.
vcoubard 1132:692ddf04fc42 1121 * @param[out] securityStatusP Security status.
vcoubard 1132:692ddf04fc42 1122 *
vcoubard 1132:692ddf04fc42 1123 * @return BLE_SUCCESS or appropriate error code indicating the reason of failure.
vcoubard 1132:692ddf04fc42 1124 *
vcoubard 1157:e1ea38b576c6 1125 * @deprecated You should use the parallel API from SecurityManager directly. A former
vcoubard 1157:e1ea38b576c6 1126 * call to ble.getLinkSecurity(...) should be replaced with
vcoubard 1157:e1ea38b576c6 1127 * ble.securityManager().getLinkSecurity(...).
vcoubard 1132:692ddf04fc42 1128 */
vcoubard 1132:692ddf04fc42 1129 ble_error_t getLinkSecurity(Gap::Handle_t connectionHandle, SecurityManager::LinkSecurityStatus_t *securityStatusP) {
vcoubard 1132:692ddf04fc42 1130 return securityManager().getLinkSecurity(connectionHandle, securityStatusP);
vcoubard 1132:692ddf04fc42 1131 }
vcoubard 1132:692ddf04fc42 1132
vcoubard 1132:692ddf04fc42 1133 /**
vcoubard 1132:692ddf04fc42 1134 * Delete all peer device context and all related bonding information from
vcoubard 1132:692ddf04fc42 1135 * the database within the security manager.
vcoubard 1132:692ddf04fc42 1136 *
vcoubard 1132:692ddf04fc42 1137 * @retval BLE_ERROR_NONE On success; else returns an error code indicating the reason for the failure.
vcoubard 1132:692ddf04fc42 1138 * @retval BLE_ERROR_INVALID_STATE If the API is called without module initialization or
vcoubard 1132:692ddf04fc42 1139 * application registration.
vcoubard 1132:692ddf04fc42 1140 *
vcoubard 1157:e1ea38b576c6 1141 * @deprecated You should use the parallel API from SecurityManager directly. A former
vcoubard 1157:e1ea38b576c6 1142 * call to ble.purgeAllBondingState() should be replaced with
vcoubard 1157:e1ea38b576c6 1143 * ble.securityManager().purgeAllBondingState().
vcoubard 1132:692ddf04fc42 1144 */
vcoubard 1132:692ddf04fc42 1145 ble_error_t purgeAllBondingState(void) {
vcoubard 1132:692ddf04fc42 1146 return securityManager().purgeAllBondingState();
vcoubard 1132:692ddf04fc42 1147 }
vcoubard 1132:692ddf04fc42 1148
vcoubard 1132:692ddf04fc42 1149 /**
vcoubard 1132:692ddf04fc42 1150 * Set up a callback for timeout events. Refer to Gap::TimeoutSource_t for
vcoubard 1132:692ddf04fc42 1151 * possible event types.
vcoubard 1132:692ddf04fc42 1152 *
vcoubard 1157:e1ea38b576c6 1153 * @deprecated You should use the parallel API from Gap directly. A former call
vcoubard 1157:e1ea38b576c6 1154 * to ble.onTimeout(callback) should be replaced with
vcoubard 1157:e1ea38b576c6 1155 * ble.gap().onTimeout(callback).
vcoubard 1132:692ddf04fc42 1156 */
vcoubard 1132:692ddf04fc42 1157 void onTimeout(Gap::TimeoutEventCallback_t timeoutCallback) {
vcoubard 1132:692ddf04fc42 1158 gap().onTimeout(timeoutCallback);
vcoubard 1132:692ddf04fc42 1159 }
vcoubard 1132:692ddf04fc42 1160
vcoubard 1132:692ddf04fc42 1161 /**
vcoubard 1132:692ddf04fc42 1162 * Set up a callback for connection events. Refer to Gap::ConnectionEventCallback_t.
vcoubard 1132:692ddf04fc42 1163 *
vcoubard 1157:e1ea38b576c6 1164 * @deprecated You should use the parallel API from Gap directly. A former call
vcoubard 1157:e1ea38b576c6 1165 * to ble.onConnection(callback) should be replaced with
vcoubard 1157:e1ea38b576c6 1166 * ble.gap().onConnection(callback).
vcoubard 1132:692ddf04fc42 1167 */
vcoubard 1132:692ddf04fc42 1168 void onConnection(Gap::ConnectionEventCallback_t connectionCallback) {
vcoubard 1132:692ddf04fc42 1169 gap().onConnection(connectionCallback);
vcoubard 1132:692ddf04fc42 1170 }
vcoubard 1132:692ddf04fc42 1171
vcoubard 1132:692ddf04fc42 1172 /**
vcoubard 1132:692ddf04fc42 1173 * Append to a chain of callbacks to be invoked upon GAP disconnection.
vcoubard 1132:692ddf04fc42 1174 *
vcoubard 1157:e1ea38b576c6 1175 * @deprecated You should use the parallel API from Gap directly. A former call
vcoubard 1157:e1ea38b576c6 1176 * to ble.onDisconnection(callback) should be replaced with
vcoubard 1157:e1ea38b576c6 1177 * ble.gap().onDisconnection(callback).
vcoubard 1132:692ddf04fc42 1178 */
vcoubard 1132:692ddf04fc42 1179 void onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback) {
vcoubard 1132:692ddf04fc42 1180 gap().onDisconnection(disconnectionCallback);
vcoubard 1132:692ddf04fc42 1181 }
vcoubard 1132:692ddf04fc42 1182
vcoubard 1157:e1ea38b576c6 1183 /**
vcoubard 1157:e1ea38b576c6 1184 * The same as onDisconnection(), but allows an object reference and member function
vcoubard 1157:e1ea38b576c6 1185 * to be added to the chain of callbacks.
vcoubard 1157:e1ea38b576c6 1186 *
vcoubard 1157:e1ea38b576c6 1187 * @deprecated You should use the parallel API from Gap directly. A former call
vcoubard 1157:e1ea38b576c6 1188 * to ble.onDisconnection(callback) should be replaced with
vcoubard 1157:e1ea38b576c6 1189 * ble.gap().onDisconnection(callback).
vcoubard 1157:e1ea38b576c6 1190 */
vcoubard 1132:692ddf04fc42 1191 template<typename T>
vcoubard 1132:692ddf04fc42 1192 void onDisconnection(T *tptr, void (T::*mptr)(const Gap::DisconnectionCallbackParams_t*)) {
vcoubard 1132:692ddf04fc42 1193 gap().onDisconnection(tptr, mptr);
vcoubard 1132:692ddf04fc42 1194 }
vcoubard 1132:692ddf04fc42 1195
vcoubard 1132:692ddf04fc42 1196 /**
vcoubard 1132:692ddf04fc42 1197 * Radio Notification is a feature that enables ACTIVE and INACTIVE
vcoubard 1132:692ddf04fc42 1198 * (nACTIVE) signals from the stack. These notify the application when the
vcoubard 1132:692ddf04fc42 1199 * radio is in use. The signal is sent using software interrupt.
vcoubard 1132:692ddf04fc42 1200 *
vcoubard 1132:692ddf04fc42 1201 * The ACTIVE signal is sent before the radio event starts. The nACTIVE
vcoubard 1132:692ddf04fc42 1202 * signal is sent at the end of the radio event. These signals can be used
vcoubard 1132:692ddf04fc42 1203 * by the application programmer to synchronize application logic with radio
vcoubard 1132:692ddf04fc42 1204 * activity. For example, the ACTIVE signal can be used to shut off external
vcoubard 1132:692ddf04fc42 1205 * devices to manage peak current drawn during periods when the radio is on,
vcoubard 1132:692ddf04fc42 1206 * or to trigger sensor data collection for transmission in the radio event.
vcoubard 1132:692ddf04fc42 1207 *
vcoubard 1132:692ddf04fc42 1208 * @param callback
vcoubard 1132:692ddf04fc42 1209 * The application handler to be invoked in response to a radio
vcoubard 1132:692ddf04fc42 1210 * ACTIVE/INACTIVE event.
vcoubard 1132:692ddf04fc42 1211 *
vcoubard 1157:e1ea38b576c6 1212 * @deprecated You should use the parallel API from Gap directly. A former call
vcoubard 1157:e1ea38b576c6 1213 * to ble.onRadioNotification(...) should be replaced with
vcoubard 1157:e1ea38b576c6 1214 * ble.gap().onRadioNotification(...).
vcoubard 1132:692ddf04fc42 1215 */
vcoubard 1132:692ddf04fc42 1216 void onRadioNotification(void (*callback)(bool)) {
vcoubard 1132:692ddf04fc42 1217 gap().onRadioNotification(callback);
vcoubard 1132:692ddf04fc42 1218 }
vcoubard 1132:692ddf04fc42 1219
vcoubard 1132:692ddf04fc42 1220 /**
vcoubard 1132:692ddf04fc42 1221 * Add a callback for the GATT event DATA_SENT (which is triggered when
vcoubard 1132:692ddf04fc42 1222 * updates are sent out by GATT in the form of notifications).
vcoubard 1132:692ddf04fc42 1223 *
vcoubard 1157:e1ea38b576c6 1224 * @note It is possible to chain together multiple onDataSent callbacks
vcoubard 1132:692ddf04fc42 1225 * (potentially from different modules of an application) to receive updates
vcoubard 1132:692ddf04fc42 1226 * to characteristics.
vcoubard 1132:692ddf04fc42 1227 *
vcoubard 1157:e1ea38b576c6 1228 * @note It is also possible to set up a callback into a member function of
vcoubard 1132:692ddf04fc42 1229 * some object.
vcoubard 1132:692ddf04fc42 1230 *
vcoubard 1157:e1ea38b576c6 1231 * @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard 1157:e1ea38b576c6 1232 * to ble.onDataSent(...) should be replaced with
vcoubard 1157:e1ea38b576c6 1233 * ble.gattServer().onDataSent(...).
vcoubard 1132:692ddf04fc42 1234 */
vcoubard 1132:692ddf04fc42 1235 void onDataSent(void (*callback)(unsigned count)) {
vcoubard 1132:692ddf04fc42 1236 gattServer().onDataSent(callback);
vcoubard 1132:692ddf04fc42 1237 }
vcoubard 1157:e1ea38b576c6 1238
vcoubard 1157:e1ea38b576c6 1239 /**
vcoubard 1157:e1ea38b576c6 1240 * The same as onDataSent(), but allows an object reference and member function
vcoubard 1157:e1ea38b576c6 1241 * to be added to the chain of callbacks.
vcoubard 1157:e1ea38b576c6 1242 *
vcoubard 1157:e1ea38b576c6 1243 * @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard 1157:e1ea38b576c6 1244 * to ble.onDataSent(...) should be replaced with
vcoubard 1157:e1ea38b576c6 1245 * ble.gattServer().onDataSent(...).
vcoubard 1157:e1ea38b576c6 1246 */
vcoubard 1132:692ddf04fc42 1247 template <typename T> void onDataSent(T * objPtr, void (T::*memberPtr)(unsigned count)) {
vcoubard 1132:692ddf04fc42 1248 gattServer().onDataSent(objPtr, memberPtr);
vcoubard 1132:692ddf04fc42 1249 }
vcoubard 1132:692ddf04fc42 1250
vcoubard 1132:692ddf04fc42 1251 /**
vcoubard 1132:692ddf04fc42 1252 * Set up a callback for when an attribute has its value updated by or at the
vcoubard 1132:692ddf04fc42 1253 * connected peer. For a peripheral, this callback is triggered when the local
vcoubard 1132:692ddf04fc42 1254 * GATT server has an attribute updated by a write command from the peer.
vcoubard 1132:692ddf04fc42 1255 * For a Central, this callback is triggered when a response is received for
vcoubard 1132:692ddf04fc42 1256 * a write request.
vcoubard 1132:692ddf04fc42 1257 *
vcoubard 1157:e1ea38b576c6 1258 * @note It is possible to chain together multiple onDataWritten callbacks
vcoubard 1132:692ddf04fc42 1259 * (potentially from different modules of an application) to receive updates
vcoubard 1132:692ddf04fc42 1260 * to characteristics. Many services, such as DFU and UART, add their own
vcoubard 1132:692ddf04fc42 1261 * onDataWritten callbacks behind the scenes to trap interesting events.
vcoubard 1132:692ddf04fc42 1262 *
vcoubard 1157:e1ea38b576c6 1263 * @note It is also possible to set up a callback into a member function of
vcoubard 1132:692ddf04fc42 1264 * some object.
vcoubard 1132:692ddf04fc42 1265 *
vcoubard 1157:e1ea38b576c6 1266 * @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard 1157:e1ea38b576c6 1267 * to ble.onDataWritten(...) should be replaced with
vcoubard 1157:e1ea38b576c6 1268 * ble.gattServer().onDataWritten(...).
vcoubard 1132:692ddf04fc42 1269 */
vcoubard 1132:692ddf04fc42 1270 void onDataWritten(void (*callback)(const GattWriteCallbackParams *eventDataP)) {
vcoubard 1132:692ddf04fc42 1271 gattServer().onDataWritten(callback);
vcoubard 1132:692ddf04fc42 1272 }
vcoubard 1157:e1ea38b576c6 1273
vcoubard 1157:e1ea38b576c6 1274 /**
vcoubard 1157:e1ea38b576c6 1275 * The same as onDataWritten(), but allows an object reference and member function
vcoubard 1157:e1ea38b576c6 1276 * to be added to the chain of callbacks.
vcoubard 1157:e1ea38b576c6 1277 *
vcoubard 1157:e1ea38b576c6 1278 * @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard 1157:e1ea38b576c6 1279 * to ble.onDataWritten(...) should be replaced with
vcoubard 1157:e1ea38b576c6 1280 * ble.gattServer().onDataWritten(...).
vcoubard 1157:e1ea38b576c6 1281 */
vcoubard 1132:692ddf04fc42 1282 template <typename T> void onDataWritten(T * objPtr, void (T::*memberPtr)(const GattWriteCallbackParams *context)) {
vcoubard 1132:692ddf04fc42 1283 gattServer().onDataWritten(objPtr, memberPtr);
vcoubard 1132:692ddf04fc42 1284 }
vcoubard 1132:692ddf04fc42 1285
vcoubard 1132:692ddf04fc42 1286 /**
vcoubard 1132:692ddf04fc42 1287 * Set up a callback to be invoked on the peripheral when an attribute is
vcoubard 1132:692ddf04fc42 1288 * being read by a remote client.
vcoubard 1132:692ddf04fc42 1289 *
vcoubard 1157:e1ea38b576c6 1290 * @note This functionality may not be available on all underlying stacks.
vcoubard 1132:692ddf04fc42 1291 * You could use GattCharacteristic::setReadAuthorizationCallback() as an
vcoubard 1132:692ddf04fc42 1292 * alternative.
vcoubard 1132:692ddf04fc42 1293 *
vcoubard 1157:e1ea38b576c6 1294 * @note It is possible to chain together multiple onDataRead callbacks
vcoubard 1132:692ddf04fc42 1295 * (potentially from different modules of an application) to receive updates
vcoubard 1132:692ddf04fc42 1296 * to characteristics. Services may add their own onDataRead callbacks
vcoubard 1132:692ddf04fc42 1297 * behind the scenes to trap interesting events.
vcoubard 1132:692ddf04fc42 1298 *
vcoubard 1157:e1ea38b576c6 1299 * @note It is also possible to set up a callback into a member function of
vcoubard 1132:692ddf04fc42 1300 * some object.
vcoubard 1132:692ddf04fc42 1301 *
vcoubard 1132:692ddf04fc42 1302 * @return BLE_ERROR_NOT_IMPLEMENTED if this functionality isn't available;
vcoubard 1132:692ddf04fc42 1303 * else BLE_ERROR_NONE.
vcoubard 1132:692ddf04fc42 1304 *
vcoubard 1157:e1ea38b576c6 1305 * @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard 1157:e1ea38b576c6 1306 * to ble.onDataRead(...) should be replaced with
vcoubard 1157:e1ea38b576c6 1307 * ble.gattServer().onDataRead(...).
vcoubard 1132:692ddf04fc42 1308 */
vcoubard 1132:692ddf04fc42 1309 ble_error_t onDataRead(void (*callback)(const GattReadCallbackParams *eventDataP)) {
vcoubard 1132:692ddf04fc42 1310 return gattServer().onDataRead(callback);
vcoubard 1132:692ddf04fc42 1311 }
vcoubard 1157:e1ea38b576c6 1312
vcoubard 1157:e1ea38b576c6 1313 /**
vcoubard 1157:e1ea38b576c6 1314 * The same as onDataRead(), but allows an object reference and member function
vcoubard 1157:e1ea38b576c6 1315 * to be added to the chain of callbacks.
vcoubard 1157:e1ea38b576c6 1316 *
vcoubard 1157:e1ea38b576c6 1317 * @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard 1157:e1ea38b576c6 1318 * to ble.onDataRead(...) should be replaced with
vcoubard 1157:e1ea38b576c6 1319 * ble.gattServer().onDataRead(...).
vcoubard 1157:e1ea38b576c6 1320 */
vcoubard 1132:692ddf04fc42 1321 template <typename T> ble_error_t onDataRead(T * objPtr, void (T::*memberPtr)(const GattReadCallbackParams *context)) {
vcoubard 1132:692ddf04fc42 1322 return gattServer().onDataRead(objPtr, memberPtr);
vcoubard 1132:692ddf04fc42 1323 }
vcoubard 1132:692ddf04fc42 1324
vcoubard 1132:692ddf04fc42 1325 /**
vcoubard 1132:692ddf04fc42 1326 * Set up a callback for when notifications or indications are enabled for a
vcoubard 1132:692ddf04fc42 1327 * characteristic on the local GattServer.
vcoubard 1132:692ddf04fc42 1328 *
vcoubard 1157:e1ea38b576c6 1329 * @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard 1157:e1ea38b576c6 1330 * to ble.onUpdatesEnabled(callback) should be replaced with
vcoubard 1157:e1ea38b576c6 1331 * ble.gattServer().onUpdatesEnabled(callback).
vcoubard 1132:692ddf04fc42 1332 */
vcoubard 1132:692ddf04fc42 1333 void onUpdatesEnabled(GattServer::EventCallback_t callback) {
vcoubard 1132:692ddf04fc42 1334 gattServer().onUpdatesEnabled(callback);
vcoubard 1132:692ddf04fc42 1335 }
vcoubard 1132:692ddf04fc42 1336
vcoubard 1132:692ddf04fc42 1337 /**
vcoubard 1132:692ddf04fc42 1338 * Set up a callback for when notifications or indications are disabled for a
vcoubard 1132:692ddf04fc42 1339 * characteristic on the local GattServer.
vcoubard 1132:692ddf04fc42 1340 *
vcoubard 1157:e1ea38b576c6 1341 * @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard 1157:e1ea38b576c6 1342 * to ble.onUpdatesEnabled(callback) should be replaced with
vcoubard 1157:e1ea38b576c6 1343 * ble.gattServer().onUpdatesEnabled(callback).
vcoubard 1132:692ddf04fc42 1344 */
vcoubard 1132:692ddf04fc42 1345 void onUpdatesDisabled(GattServer::EventCallback_t callback) {
vcoubard 1132:692ddf04fc42 1346 gattServer().onUpdatesDisabled(callback);
vcoubard 1132:692ddf04fc42 1347 }
vcoubard 1132:692ddf04fc42 1348
vcoubard 1132:692ddf04fc42 1349 /**
vcoubard 1132:692ddf04fc42 1350 * Set up a callback for when the GATT server receives a response for an
vcoubard 1132:692ddf04fc42 1351 * indication event sent previously.
vcoubard 1132:692ddf04fc42 1352 *
vcoubard 1157:e1ea38b576c6 1353 * @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard 1157:e1ea38b576c6 1354 * to ble.onConfirmationReceived(callback) should be replaced with
vcoubard 1157:e1ea38b576c6 1355 * ble.gattServer().onConfirmationReceived(callback).
vcoubard 1132:692ddf04fc42 1356 */
vcoubard 1132:692ddf04fc42 1357 void onConfirmationReceived(GattServer::EventCallback_t callback) {
vcoubard 1132:692ddf04fc42 1358 gattServer().onConfirmationReceived(callback);
vcoubard 1132:692ddf04fc42 1359 }
vcoubard 1132:692ddf04fc42 1360
vcoubard 1132:692ddf04fc42 1361 /**
vcoubard 1132:692ddf04fc42 1362 * Set up a callback for when the security setup procedure (key generation
vcoubard 1132:692ddf04fc42 1363 * and exchange) for a link has started. This will be skipped for bonded
vcoubard 1132:692ddf04fc42 1364 * devices. The callback is passed in parameters received from the peer's
vcoubard 1132:692ddf04fc42 1365 * security request: bool allowBonding, bool requireMITM, and
vcoubard 1132:692ddf04fc42 1366 * SecurityIOCapabilities_t.
vcoubard 1132:692ddf04fc42 1367 *
vcoubard 1157:e1ea38b576c6 1368 * @deprecated You should use the parallel API from SecurityManager directly. A former
vcoubard 1157:e1ea38b576c6 1369 * call to ble.onSecuritySetupInitiated(callback) should be replaced with
vcoubard 1157:e1ea38b576c6 1370 * ble.securityManager().onSecuritySetupInitiated(callback).
vcoubard 1132:692ddf04fc42 1371 */
vcoubard 1132:692ddf04fc42 1372 void onSecuritySetupInitiated(SecurityManager::SecuritySetupInitiatedCallback_t callback) {
vcoubard 1132:692ddf04fc42 1373 securityManager().onSecuritySetupInitiated(callback);
vcoubard 1132:692ddf04fc42 1374 }
vcoubard 1132:692ddf04fc42 1375
vcoubard 1132:692ddf04fc42 1376 /**
vcoubard 1132:692ddf04fc42 1377 * Set up a callback for when the security setup procedure (key generation
vcoubard 1132:692ddf04fc42 1378 * and exchange) for a link has completed. This will be skipped for bonded
vcoubard 1132:692ddf04fc42 1379 * devices. The callback is passed in the success/failure status of the
vcoubard 1132:692ddf04fc42 1380 * security setup procedure.
vcoubard 1132:692ddf04fc42 1381 *
vcoubard 1157:e1ea38b576c6 1382 * @deprecated You should use the parallel API from SecurityManager directly. A former
vcoubard 1157:e1ea38b576c6 1383 * call to ble.onSecuritySetupCompleted(callback) should be replaced with
vcoubard 1157:e1ea38b576c6 1384 * ble.securityManager().onSecuritySetupCompleted(callback).
vcoubard 1132:692ddf04fc42 1385 */
vcoubard 1132:692ddf04fc42 1386 void onSecuritySetupCompleted(SecurityManager::SecuritySetupCompletedCallback_t callback) {
vcoubard 1132:692ddf04fc42 1387 securityManager().onSecuritySetupCompleted(callback);
vcoubard 1132:692ddf04fc42 1388 }
vcoubard 1132:692ddf04fc42 1389
vcoubard 1132:692ddf04fc42 1390 /**
vcoubard 1132:692ddf04fc42 1391 * Set up a callback for when a link with the peer is secured. For bonded
vcoubard 1132:692ddf04fc42 1392 * devices, subsequent reconnections with a bonded peer will result only in
vcoubard 1132:692ddf04fc42 1393 * this callback when the link is secured, and setup procedures will not
vcoubard 1132:692ddf04fc42 1394 * occur unless the bonding information is either lost or deleted on either
vcoubard 1132:692ddf04fc42 1395 * or both sides. The callback is passed in a SecurityManager::SecurityMode_t according
vcoubard 1132:692ddf04fc42 1396 * to the level of security in effect for the secured link.
vcoubard 1132:692ddf04fc42 1397 *
vcoubard 1157:e1ea38b576c6 1398 * @deprecated You should use the parallel API from SecurityManager directly. A former
vcoubard 1157:e1ea38b576c6 1399 * call to ble.onLinkSecured(callback) should be replaced with
vcoubard 1157:e1ea38b576c6 1400 * ble.securityManager().onLinkSecured(callback).
vcoubard 1132:692ddf04fc42 1401 */
vcoubard 1132:692ddf04fc42 1402 void onLinkSecured(SecurityManager::LinkSecuredCallback_t callback) {
vcoubard 1132:692ddf04fc42 1403 securityManager().onLinkSecured(callback);
vcoubard 1132:692ddf04fc42 1404 }
vcoubard 1132:692ddf04fc42 1405
vcoubard 1132:692ddf04fc42 1406 /**
vcoubard 1132:692ddf04fc42 1407 * Set up a callback for successful bonding, meaning that link-specific security
vcoubard 1132:692ddf04fc42 1408 * context is stored persistently for a peer device.
vcoubard 1132:692ddf04fc42 1409 *
vcoubard 1157:e1ea38b576c6 1410 * @deprecated You should use the parallel API from SecurityManager directly. A former
vcoubard 1157:e1ea38b576c6 1411 * call to ble.onSecurityContextStored(callback) should be replaced with
vcoubard 1157:e1ea38b576c6 1412 * ble.securityManager().onSecurityContextStored(callback).
vcoubard 1132:692ddf04fc42 1413 */
vcoubard 1132:692ddf04fc42 1414 void onSecurityContextStored(SecurityManager::HandleSpecificEvent_t callback) {
vcoubard 1132:692ddf04fc42 1415 securityManager().onSecurityContextStored(callback);
vcoubard 1132:692ddf04fc42 1416 }
vcoubard 1132:692ddf04fc42 1417
vcoubard 1132:692ddf04fc42 1418 /**
vcoubard 1132:692ddf04fc42 1419 * Set up a callback for when the passkey needs to be displayed on a
vcoubard 1132:692ddf04fc42 1420 * peripheral with DISPLAY capability. This happens when security is
vcoubard 1136:22aada733dbd 1421 * configured to prevent Man-In-The-Middle attacks, and the peers need to exchange
vcoubard 1132:692ddf04fc42 1422 * a passkey (or PIN) to authenticate the connection
vcoubard 1132:692ddf04fc42 1423 * attempt.
vcoubard 1132:692ddf04fc42 1424 *
vcoubard 1157:e1ea38b576c6 1425 * @deprecated You should use the parallel API from SecurityManager directly. A former
vcoubard 1157:e1ea38b576c6 1426 * call to ble.onPasskeyDisplay(callback) should be replaced with
vcoubard 1157:e1ea38b576c6 1427 * ble.securityManager().onPasskeyDisplay(callback).
vcoubard 1132:692ddf04fc42 1428 */
vcoubard 1132:692ddf04fc42 1429 void onPasskeyDisplay(SecurityManager::PasskeyDisplayCallback_t callback) {
vcoubard 1132:692ddf04fc42 1430 return securityManager().onPasskeyDisplay(callback);
vcoubard 1132:692ddf04fc42 1431 }
vcoubard 1132:692ddf04fc42 1432
vcoubard 1132:692ddf04fc42 1433 private:
vcoubard 1132:692ddf04fc42 1434 /**
vcoubard 1132:692ddf04fc42 1435 * Implementation of init() [internal to BLE_API].
vcoubard 1132:692ddf04fc42 1436 *
vcoubard 1132:692ddf04fc42 1437 * The implementation is separated into a private method because it isn't
vcoubard 1132:692ddf04fc42 1438 * suitable to be included in the header.
vcoubard 1132:692ddf04fc42 1439 */
vcoubard 1132:692ddf04fc42 1440 ble_error_t initImplementation(FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback);
vcoubard 1132:692ddf04fc42 1441
vcoubard 1132:692ddf04fc42 1442 private:
vcoubard 1132:692ddf04fc42 1443 BLE(const BLE&);
vcoubard 1132:692ddf04fc42 1444 BLE &operator=(const BLE &);
vcoubard 1132:692ddf04fc42 1445
vcoubard 1132:692ddf04fc42 1446 private:
vcoubard 1132:692ddf04fc42 1447 InstanceID_t instanceID;
vcoubard 1132:692ddf04fc42 1448 BLEInstanceBase *transport; /* The device-specific backend */
vcoubard 1132:692ddf04fc42 1449 };
vcoubard 1132:692ddf04fc42 1450
vcoubard 1157:e1ea38b576c6 1451 typedef BLE BLEDevice; /**< @deprecated This type alias is retained for the
vcoubard 1157:e1ea38b576c6 1452 * sake of compatibility with older
vcoubard 1132:692ddf04fc42 1453 * code. Will be dropped at some point soon.*/
vcoubard 1132:692ddf04fc42 1454
rgrover1 716:11b41f651697 1455 #endif // ifndef __BLE_H__