Diff: stm32f3xx_hal_msp.h

Revision:

11:439f3a34c42e

Child:

14:0344705e6fb8

diff -r 227a455d0f9f -r 439f3a34c42e stm32f3xx_hal_msp.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/stm32f3xx_hal_msp.h	Tue Dec 22 18:19:16 2015 +0000
@@ -0,0 +1,95 @@
+ /**
+ ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  *
+  * Modified by Zoltan Hudak    <hudakz@inbox.com>
+  *
+  ******************************************************************************
+  */
+
+#ifndef stm32f3xx_hal_H
+#define stm32f3xx_hal_H
+
+#include "pinmap.h"
+
+typedef struct can_s    can_t;
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+/**
+  * @brief  CAN initialization.
+  * @param  obj: can_t object
+  * @param  rxPin: RX pin name
+  * @param  txPin: TX pin name
+  * @param  abom: Automatic recovery from bus-off state
+  * @retval None
+  */
+void initCAN(can_t* obj, PinName rxPin, PinName txPin, FunctionalState abom);
+
+/**
+  * @brief  CAN MSP Initialization
+  * @param  hcan: CAN handle pointer
+  * @retval None
+  */
+void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan);
+
+/**
+  * @brief CAN MSP De-Initialization
+  *        This function frees the hardware resources used:
+  *          - Disable the Peripheral's clock
+  *          - Revert GPIO to their default state
+  * @param hcan: CAN handle pointer
+  * @retval None
+  */
+void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan);
+
+/**
+* @brief  Handles CAN1 RX0 interrupt request.
+* @param  None
+* @retval None
+*/
+void USB_LP_CAN_RX0_IRQHandler(void);
+
+/**
+  * @brief  Transmission  complete callback in non blocking mode
+  * @param  _canHandle: pointer to a CAN_HandleTypeDef structure that contains
+  *         the configuration information for the specified CAN.
+  * @retval None
+  */
+void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* _canHandle);
+
+#ifdef __cplusplus
+}
+
+#endif
+
+#endif
\ No newline at end of file