heart rate monitor

Dependencies:   BLE_API GroveEarbudSensor mbed nRF51822

Fork of BLE_HeartRate by Bluetooth Low Energy

main.cpp

Committer:
rgrover1
Date:
2014-09-02
Revision:
41:9cef0129da5f
Parent:
40:e73130c6f2bb
Child:
42:06ebef2e0e44

File content as of revision 41:9cef0129da5f:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "mbed.h"
#include "BLEDevice.h"
#include "HeartRateService.h"

BLEDevice  ble;
DigitalOut led1(LED1);

#define NEED_CONSOLE_OUTPUT 0 /* Set this if you need debug messages on the console;
                               * it will have an impact on code-size and power consumption. */

#if NEED_CONSOLE_OUTPUT
Serial  pc(USBTX, USBRX);
#define DEBUG(...) { pc.printf(__VA_ARGS__); }
#else
#define DEBUG(...) /* nothing */
#endif /* #if NEED_CONSOLE_OUTPUT */

const static char     DEVICE_NAME[]        = "Nordic_HRM";
static const uint16_t uuid16_list[]        = {GattService::UUID_HEART_RATE_SERVICE};
static volatile bool  triggerSensorPolling = false;

void disconnectionCallback(Gap::Handle_t handle, Gap::DisconnectionReason_t reason)
{
    DEBUG("Disconnected handle %u!\n\r", handle);
    DEBUG("Restarting the advertising process\n\r");
    ble.startAdvertising();
}

void periodicCallback(void)
{
    led1 = !led1; /* Do blinky on LED1 while we're waiting for BLE events */

    /* Note that the periodicCallback() executes in interrupt context, so it is safer to do
     * heavy-weight sensor polling from the main thread. */
    triggerSensorPolling = true;
}

int main(void)
{
    led1 = 1;
    Ticker ticker;
    ticker.attach(periodicCallback, 1);

    DEBUG("Initialising the nRF51822\n\r");
    ble.init();
    ble.onDisconnection(disconnectionCallback);

    /* setup advertising */
    ble.accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED | GapAdvertisingData::LE_GENERAL_DISCOVERABLE);
    ble.accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_16BIT_SERVICE_IDS, (uint8_t *)uuid16_list, sizeof(uuid16_list));
    ble.accumulateAdvertisingPayload(GapAdvertisingData::HEART_RATE_SENSOR_HEART_RATE_BELT);
    ble.accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LOCAL_NAME, (uint8_t *)DEVICE_NAME, sizeof(DEVICE_NAME));
    ble.setAdvertisingType(GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED);
    ble.setAdvertisingInterval(1600); /* 1000ms; in multiples of 0.625ms. */
    ble.startAdvertising();

    uint8_t hrmCounter = 100;
    HeartRateService hrService(ble, hrmCounter, HeartRateService::LOCATION_FINGER);

    while (true) {
        if (triggerSensorPolling) {
            triggerSensorPolling = false;

            /* Do blocking calls or whatever is necessary for sensor polling. */
            /* In our case, we simply update the dummy HRM measurement. */
            hrmCounter++;
            if (hrmCounter == 175) {
                hrmCounter = 100;
            }

            hrService.updateHeartRate(hrmCounter);
        } else {
            ble.waitForEvent();
        }
    }
}