File content as of revision 0:3afcd581558d:

/***************************************************************************//**
 *   @file   adt7420.h
 *   @brief  Header file of ADT7420 Driver.
 *   @author DBogdan (dragos.bogdan@analog.com)
********************************************************************************
 * Copyright 2012(c) Analog Devices, Inc.
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *  - Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *  - Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *  - Neither the name of Analog Devices, Inc. nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *  - The use of this software may or may not infringe the patent rights
 *    of one or more patent holders.  This license does not release you
 *    from the requirement that you obtain separate licenses from these
 *    patent holders to use this software.
 *  - Use of the software either in source or binary form, must be run
 *    on or directly connected to an Analog Devices Inc. component.
 *
 * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************/
#ifndef __ADT7420_H__
#define __ADT7420_H__

/******************************************************************************/
/***************************** Include Files **********************************/
/******************************************************************************/
#include <stdint.h>
#include "platform_drivers.h"

/******************************************************************************/
/************************** ADT7420 Definitions *******************************/
/******************************************************************************/

/* ADT7420 address */
#define ADT7420_A0_PIN(x)	(((x) & 0x1) << 0) // I2C Serial Bus Address Selection Pin
#define ADT7420_A1_PIN(x)	(((x) & 0x1) << 1) // I2C Serial Bus Address Selection Pin
#define ADT7420_ADDRESS(x,y)	(0x48 + ADT7420_A1_PIN(x) + ADT7420_A0_PIN(y))

/* ADT7420 registers */
#define ADT7420_REG_TEMP_MSB		0x00 // Temperature value MSB
#define ADT7420_REG_TEMP_LSB		0x01 // Temperature value LSB
#define ADT7420_REG_STATUS		0x02 // Status
#define ADT7420_REG_CONFIG		0x03 // Configuration
#define ADT7420_REG_T_HIGH_MSB		0x04 // Temperature HIGH setpoint MSB
#define ADT7420_REG_T_HIGH_LSB		0x05 // Temperature HIGH setpoint LSB
#define ADT7420_REG_T_LOW_MSB		0x06 // Temperature LOW setpoint MSB
#define ADT7420_REG_T_LOW_LSB		0x07 // Temperature LOW setpoint LSB
#define ADT7420_REG_T_CRIT_MSB		0x08 // Temperature CRIT setpoint MSB
#define ADT7420_REG_T_CRIT_LSB		0x09 // Temperature CRIT setpoint LSB
#define ADT7420_REG_HIST		0x0A // Temperature HYST setpoint
#define ADT7420_REG_ID			0x0B // ID
#define ADT7420_REG_RESET		0x2F // Software reset

/* ADT7420_REG_STATUS definition */
#define ADT7420_STATUS_T_LOW		(1 << 4)
#define ADT7420_STATUS_T_HIGH		(1 << 5)
#define ADT7420_STATUS_T_CRIT		(1 << 6)
#define ADT7420_STATUS_RDY		(1 << 7)

/* ADT7420_REG_CONFIG definition */
#define ADT7420_CONFIG_FAULT_QUEUE(x)	(x & 0x3)
#define ADT7420_CONFIG_CT_POL		(1 << 2)
#define ADT7420_CONFIG_INT_POL		(1 << 3)
#define ADT7420_CONFIG_INT_CT_MODE	(1 << 4)
#define ADT7420_CONFIG_OP_MODE(x)	((x & 0x3) << 5)
#define ADT7420_CONFIG_RESOLUTION	(1 << 7)

/* ADT7420_CONFIG_FAULT_QUEUE(x) options */
#define ADT7420_FAULT_QUEUE_1_FAULT	0
#define ADT7420_FAULT_QUEUE_2_FAULTS	1
#define ADT7420_FAULT_QUEUE_3_FAULTS	2
#define ADT7420_FAULT_QUEUE_4_FAULTS	3

/* ADT7420_CONFIG_OP_MODE(x) options */
#define ADT7420_OP_MODE_CONT_CONV	0
#define ADT7420_OP_MODE_ONE_SHOT	1
#define ADT7420_OP_MODE_1_SPS		2
#define ADT7420_OP_MODE_SHUTDOWN	3

/* ADT7420 default ID */
#define ADT7420_DEFAULT_ID		0xCB

/******************************************************************************/
/*************************** Types Declarations *******************************/
/******************************************************************************/

struct adt7420_dev {
	/* I2C */
	i2c_desc	*i2c_desc;
	/* Device Settings */
	uint8_t		resolution_setting;
};

struct adt7420_init_param {
	/* I2C */
	i2c_init_param	i2c_init;
	/* Device Settings */
	uint8_t		resolution_setting;
};

/******************************************************************************/
/************************ Functions Declarations ******************************/
/******************************************************************************/

/*! Reads the value of a register. */
uint8_t adt7420_get_register_value(struct adt7420_dev *dev,
				   uint8_t register_address);

/*! Sets the value of a register. */
void adt7420_set_register_value(struct adt7420_dev *dev,
				uint8_t register_address,
				uint8_t register_value);

/*! Initializes the comm. peripheral and checks if the device is present. */
int32_t adt7420_init(struct adt7420_dev **device,
		     struct adt7420_init_param init_param);

/* Free the resources allocated by adt7420_init(). */
int32_t adt7420_remove(struct adt7420_dev *dev);

/*! Resets the ADT7420. */
void adt7420_reset(struct adt7420_dev *dev);

/*! Sets the operational mode for ADT7420. */
void adt7420_set_operation_mode(struct adt7420_dev *dev,
				uint8_t mode);

/*! Sets the resolution for ADT7420. */
void adt7420_set_resolution(struct adt7420_dev *dev,
			    uint8_t resolution);

/*! Reads the temperature data and converts it to Celsius degrees. */
float adt7420_get_temperature(struct adt7420_dev *dev);

#endif	/* __ADT7420_H__ */