Diff: noos_mbed/drivers/adc/ad7606/ad7606.h

Revision:

0:e8a1ba50c46b

diff -r 000000000000 -r e8a1ba50c46b noos_mbed/drivers/adc/ad7606/ad7606.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/noos_mbed/drivers/adc/ad7606/ad7606.h	Thu Jan 14 19:12:57 2021 +0530
@@ -0,0 +1,404 @@
+/***************************************************************************//**
+ *   @file   ad7606.h
+ *   @brief  Header file for the ad7606 Driver.
+ *   @author Stefan Popa (stefan.popa@analog.com)
+ *   @author Darius Berghe (darius.berghe@analog.com)
+********************************************************************************
+ * Copyright 2020(c) Analog Devices, Inc.
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *  - Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  - Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  - Neither the name of Analog Devices, Inc. nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *  - The use of this software may or may not infringe the patent rights
+ *    of one or more patent holders.  This license does not release you
+ *    from the requirement that you obtain separate licenses from these
+ *    patent holders to use this software.
+ *  - Use of the software either in source or binary form, must be run
+ *    on or directly connected to an Analog Devices Inc. component.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+#ifndef AD7606_H_
+#define AD7606_H_
+
+/******************************************************************************/
+/***************************** Include Files **********************************/
+/******************************************************************************/
+#include <stdint.h>
+#include <stdbool.h>
+
+#include "platform_drivers.h"
+
+/******************************************************************************/
+/********************** Macros and Constants Definitions **********************/
+/******************************************************************************/
+/* Error codes defined in 'errno.h' file but can't find by Mbed online/offline
+ * compiler
+ * */
+#define ENOTSUP						134
+#define EBADMSG 					77	/* Bad message */
+#define ETIME 						62	/* Stream ioctl timeout */
+#define	ENODEV 						19	/* No such device */
+
+#define AD7606_REG_STATUS			0x01
+#define AD7606_REG_CONFIG			0x02
+#define AD7606_REG_RANGE_CH_ADDR(ch)		(0x03 + ((ch) >> 1))
+#define AD7606_REG_BANDWIDTH			0x07
+#define AD7606_REG_OVERSAMPLING			0x08
+#define AD7606_REG_GAIN_CH(ch)			(0x09 + (ch))
+#define AD7606_REG_OFFSET_CH(ch)		(0x11 + (ch))
+#define AD7606_REG_PHASE_CH(ch)			(0x19 + (ch))
+#define AD7606_REG_DIGITAL_DIAG_ENABLE		0x21
+#define AD7606_REG_DIGITAL_DIAG_ERR		0x22
+#define AD7606_REG_OPEN_DETECT_ENABLE		0x23
+#define AD7606_REG_OPEN_DETECTED		0x24
+#define AD7606_REG_AIN_OV_UV_DIAG_ENABLE	0x25
+#define AD7606_REG_AIN_OV_DIAG_ERROR		0x26
+#define AD7606_REG_AIN_UV_DIAG_ERROR		0x27
+#define AD7606_REG_DIAGNOSTIC_MUX_CH(ch)	(0x28 + ((ch) >> 1))
+#define AD7606_REG_OPEN_DETECT_QUEUE		0x2C
+#define AD7606_REG_CLK_FS_COUNTER		0x2D
+#define AD7606_REG_CLK_OS_COUNTER		0x2E
+#define AD7606_REG_ID				0x2F
+
+/* AD7606_REG_STATUS */
+#define AD7606_STATUS_CHANNEL_MSK		GENMASK(2,0)
+#define AD7606_AIN_UV_ERR_MSK			BIT(3)
+#define AD7606_AIN_OV_ERR_MSK			BIT(4)
+#define AD7606_OPEN_DETECTED_MSK		BIT(5)
+#define AD7606_DIGITAL_ERROR_MSK		BIT(6)
+#define AD7606_RESET_DETECT_MSK			BIT(7)
+
+/* AD7606_REG_CONFIG */
+#define AD7606_CONFIG_OPERATION_MODE_MSK	GENMASK(1,0)
+#define AD7606_CONFIG_DOUT_FORMAT_MSK		GENMASK(4,3)
+#define AD7606_CONFIG_EXT_OS_CLOCK_MSK		BIT(5)
+#define AD7606_CONFIG_STATUS_HEADER_MSK		BIT(6)
+
+/* AD7606_REG_RANGE_CH_X_Y */
+#define AD7606_RANGE_CH_MSK(ch)		(GENMASK(3, 0) << (4 * ((ch) % 2)))
+#define AD7606_RANGE_CH_MODE(ch, mode)	\
+	((GENMASK(3, 0) & mode) << (4 * ((ch) % 2)))
+
+/* AD7606_REG_OVERSAMPLING */
+#define AD7606_OS_PAD_MSK			GENMASK(7,4)
+#define AD7606_OS_RATIO_MSK			GENMASK(3,0)
+
+/* AD7606_REG_ID */
+#define AD7606_ID_DEVICE_ID_MSK			GENMASK(7,4)
+#define AD7606_ID_SILICON_REVISION_MSK		GENMASK(3,0)
+
+/* AD7606_REG_GAIN_CH */
+#define AD7606_GAIN_MSK				GENMASK(5,0)
+
+/* AD7606_REG_DIGITAL_DIAG_ENABLE */
+#define AD7606_ROM_CRC_ERR_EN_MSK		BIT(0)
+#define AD7606_MM_CRC_ERR_EN_MSK		BIT(1)
+#define AD7606_INT_CRC_ERR_EN_MSK		BIT(2)
+#define AD7606_SPI_WRITE_ERR_EN_MSK		BIT(3)
+#define AD7606_SPI_READ_ERR_EN_MSK		BIT(4)
+#define AD7606_BUSY_STUCK_HIGH_ERR_EN_MSK	BIT(5)
+#define AD7606_CLK_FS_OS_COUNTER_EN_MSK		BIT(6)
+#define AD7606_INTERFACE_CHECK_EN_MSK		BIT(7)
+
+/* AD7606_REG_DIAGNOSTIC_MUX_CH */
+#define AD7606_DIAGN_MUX_CH_MSK(ch)		(GENMASK(2, 0) << (3 * (ch & 0x1)))
+
+#define AD7606_RD_FLAG_MSK(x)		(BIT(6) | ((x) & 0x3F))
+#define AD7606_WR_FLAG_MSK(x)		((x) & 0x3F)
+
+#define AD7606_MAX_CHANNELS		8
+
+/**
+ * @enum ad7606_device_id
+ * @brief Device ID definitions
+ */
+enum ad7606_device_id {
+	/** 4-Channel DAS with 16-Bit, Bipolar Input, Simultaneous Sampling ADC */
+	ID_AD7605_4,
+	/** 4-Channel DAS with 16-Bit, Bipolar Input, Simultaneous Sampling ADC */
+	ID_AD7606_4,
+	/** 6-Channel DAS with 16-Bit, Bipolar Input, Simultaneous Sampling ADC */
+	ID_AD7606_6,
+	/** 8-Channel DAS with 16-Bit, Bipolar Input, Simultaneous Sampling ADC */
+	ID_AD7606_8,
+	/** 8-Channel DAS with 16-Bit, 800 kSPS, Bipolar Input, Simultaneous Sampling ADC */
+	ID_AD7606B,
+	/** 8-Channel DAS with 16-Bit, 1 MSPS, Bipolar Input, Simultaneous Sampling ADC */
+	ID_AD7606C_16,
+	/** 8-Channel DAS with 18-Bit, 1 MSPS, Bipolar Input, Simultaneous Sampling ADC */
+	ID_AD7606C_18,
+	/** 8-Channel DAS with 18-Bit, Bipolar, Simultaneous Sampling ADC */
+	ID_AD7608,
+	/** 8-Channel Differential DAS with 18-Bit, Bipolar, Simultaneous Sampling ADC */
+	ID_AD7609,
+};
+
+/**
+ * @enum ad7606_osr
+ * @brief Oversampling ratio
+ */
+enum ad7606_osr {
+	/** Oversample by 1 */
+	AD7606_OSR_1,
+	/** Oversample by 2 */
+	AD7606_OSR_2,
+	/** Oversample by 4 */
+	AD7606_OSR_4,
+	/** Oversample by 8 */
+	AD7606_OSR_8,
+	/** Oversample by 16 */
+	AD7606_OSR_16,
+	/** Oversample by 32 */
+	AD7606_OSR_32,
+	/** Oversample by 64 */
+	AD7606_OSR_64,
+	/** Oversample by 128, available for chips that have software mode only */
+	AD7606_OSR_128,
+	/** Oversample by 256, available for chips that have software mode only */
+	AD7606_OSR_256
+};
+
+/**
+ * @enum ad7606_op_mode
+ * @brief Operation mode
+ */
+enum ad7606_op_mode {
+	/** Normal operation mode */
+	AD7606_NORMAL,
+	/** Standby mode, all the PGAs, and all the SAR ADCs enter a low power mode */
+	AD7606_STANDBY,
+	/** Autostandby mode, available only in software mode */
+	AD7606_AUTOSTANDBY,
+	/** Shutdown mode, all circuitry is powered down */
+	AD7606_SHUTDOWN
+};
+
+/**
+ * @enum ad7606_dout_format
+ * @brief Number of DOUT lines
+ */
+enum ad7606_dout_format {
+	/** DOUT A line is used */
+	AD7606_1_DOUT,
+	/** DOUT A,B lines are used. */
+	AD7606_2_DOUT,
+	/** DOUT A,B,C,D lines are used. */
+	AD7606_4_DOUT,
+	/** DOUT A,B,C,D,E,F,G,H lines are used. */
+	AD7606_8_DOUT
+};
+
+/**
+ * @struct ad7606_config
+ * @brief AD7606_REG_CONFIG configuration parameters
+ */
+struct ad7606_config {
+	/** Operation mode */
+	enum ad7606_op_mode op_mode;
+	/** Number of DOUT lines */
+	enum ad7606_dout_format dout_format;
+	/** External oversampling clock switch */
+	bool ext_os_clock;
+	/** Status header switch */
+	bool status_header;
+};
+
+/**
+ * @struct ad7606_range
+ * @brief Operation range as specified in datasheet (in uV)
+ */
+struct ad7606_range {
+	/** Minimum range value (may be negative) */
+	int32_t min;
+	/** Maximum range value */
+	int32_t max;
+	/** Whether the range is differential */
+	bool differential;
+};
+
+/**
+ * @struct ad7606_digital_diag
+ * @brief Oversampling settings
+ */
+struct ad7606_oversampling {
+	/** Oversampling padding */
+	uint8_t os_pad:4;
+	/** Oversampling ratio */
+	enum ad7606_osr os_ratio:4;
+};
+
+/**
+ * @struct ad7606_digital_diag
+ * @brief Digital diagnostics configuration switches
+ */
+struct ad7606_digital_diag {
+	/** ROM CRC check switch */
+	bool rom_crc_err_en: 1;
+	/** Mempry map CRC check switch */
+	bool mm_crc_err_en: 1;
+	/** Conversion and register data CRC check switch */
+	bool int_crc_err_en: 1;
+	/** SPI write error switch  */
+	bool spi_write_err_en: 1;
+	/** SPI read error switch  */
+	bool spi_read_err_en: 1;
+	/** Busy stuck high for more than 4us error switch  */
+	bool busy_stuck_high_err_en: 1;
+	/** Frame sync and oversampling clock counter switch  */
+	bool clk_fs_os_counter_en: 1;
+	/** Interface check switch */
+	bool interface_check_en: 1;
+};
+
+/**
+ * @struct ad7606_dev
+ * @brief Device driver structure
+ */
+struct ad7606_dev {
+	/** SPI descriptor*/
+	spi_desc *spi_desc;
+	/** RESET GPIO descriptor */
+	struct gpio_desc *gpio_reset;
+	/** CONVST GPIO descriptor */
+	struct gpio_desc *gpio_convst;
+	/** BUSY GPIO descriptor */
+	struct gpio_desc *gpio_busy;
+	/** STBYn GPIO descriptor */
+	struct gpio_desc *gpio_stby_n;
+	/** RANGE GPIO descriptor */
+	struct gpio_desc *gpio_range;
+	/** OS0 GPIO descriptor */
+	struct gpio_desc *gpio_os0;
+	/** OS1 GPIO descriptor */
+	struct gpio_desc *gpio_os1;
+	/** OS2 GPIO descriptor */
+	struct gpio_desc *gpio_os2;
+	/** PARn/SER GPIO descriptor */
+	struct gpio_desc *gpio_par_ser;
+	/** Device ID */
+	enum ad7606_device_id device_id;
+	/** Oversampling settings */
+	struct ad7606_oversampling oversampling;
+	/** Whether the device is running in hardware or software mode */
+	bool sw_mode;
+	/** Whether the device is running in register or ADC reading mode */
+	bool reg_mode;
+	/** Number of DOUT lines supported by the device */
+	enum ad7606_dout_format max_dout_lines;
+	/** Configuration register settings */
+	struct ad7606_config config;
+	/** Digital diagnostics register settings */
+	struct ad7606_digital_diag digital_diag_enable;
+	/** Number of input channels of the device */
+	uint8_t num_channels;
+	/** Channel offset calibration */
+	int8_t offset_ch[AD7606_MAX_CHANNELS];
+	/** Channel phase calibration */
+	uint8_t phase_ch[AD7606_MAX_CHANNELS];
+	/** Channel gain calibration */
+	uint8_t gain_ch[AD7606_MAX_CHANNELS];
+	/** Channel operating range */
+	struct ad7606_range range_ch[AD7606_MAX_CHANNELS];
+	/** Data buffer (used internally by the SPI communication functions) */
+	uint8_t data[28];
+};
+
+/**
+ * @struct ad7606_dev
+ * @brief Device driver initialization parameters
+ */
+struct ad7606_init_param {
+	/** SPI initialization parameters */
+	spi_init_param spi_init;
+	/** RESET GPIO initialization parameters */
+	struct gpio_init_param *gpio_reset;
+	/** CONVST GPIO initialization parameters */
+	struct gpio_init_param *gpio_convst;
+	/** BUSY GPIO initialization parameters */
+	struct gpio_init_param *gpio_busy;
+	/** STBYn GPIO initialization parameters */
+	struct gpio_init_param *gpio_stby_n;
+	/** RANGE GPIO initialization parameters */
+	struct gpio_init_param *gpio_range;
+	/** OS0 GPIO initialization parameters */
+	struct gpio_init_param *gpio_os0;
+	/** OS1 GPIO initialization parameters */
+	struct gpio_init_param *gpio_os1;
+	/** OS2 GPIO initialization parameters */
+	struct gpio_init_param *gpio_os2;
+	/** PARn/SER GPIO initialization parameters */
+	struct gpio_init_param *gpio_par_ser;
+	/** Device ID */
+	enum ad7606_device_id device_id;
+	/** Oversampling settings */
+	struct ad7606_oversampling oversampling;
+	/** Whether the device is running in hardware or software mode */
+	bool sw_mode;
+	/** Configuration register settings */
+	struct ad7606_config config;
+	/** Digital diagnostics register settings */
+	struct ad7606_digital_diag digital_diag_enable;
+	/** Channel offset calibration */
+	int8_t offset_ch[AD7606_MAX_CHANNELS];
+	/** Channel phase calibration */
+	uint8_t phase_ch[AD7606_MAX_CHANNELS];
+	/** Channel gain calibration */
+	uint8_t gain_ch[AD7606_MAX_CHANNELS];
+	/** Channel operating range */
+	struct ad7606_range range_ch[AD7606_MAX_CHANNELS];
+};
+
+int32_t ad7606_spi_reg_read(struct ad7606_dev *dev,
+			    uint8_t reg_addr,
+			    uint8_t *reg_data);
+int32_t ad7606_spi_reg_write(struct ad7606_dev *dev,
+			     uint8_t reg_addr,
+			     uint8_t reg_data);
+int32_t ad7606_spi_write_mask(struct ad7606_dev *dev,
+			      uint32_t addr,
+			      uint32_t mask,
+			      uint32_t val);
+int32_t ad7606_spi_data_read(struct ad7606_dev *dev,
+			     uint32_t *data);
+int32_t ad7606_read(struct ad7606_dev *dev,
+		    uint32_t *data);
+int32_t ad7606_convst(struct ad7606_dev *dev);
+int32_t ad7606_reset(struct ad7606_dev *dev);
+int32_t ad7606_set_oversampling(struct ad7606_dev *dev,
+				struct ad7606_oversampling oversampling);
+int32_t ad7606_set_ch_range(struct ad7606_dev *dev, uint8_t ch,
+			    struct ad7606_range range);
+int32_t ad7606_set_ch_offset(struct ad7606_dev *dev, uint8_t ch,
+			     int8_t offset);
+int32_t ad7606_set_ch_phase(struct ad7606_dev *dev, uint8_t ch,
+			    uint8_t phase);
+int32_t ad7606_set_ch_gain(struct ad7606_dev *dev, uint8_t ch,
+			   uint8_t gain);
+int32_t ad7606_set_config(struct ad7606_dev *dev,
+			  struct ad7606_config config);
+int32_t ad7606_set_digital_diag(struct ad7606_dev *dev,
+				struct ad7606_digital_diag diag);
+int32_t ad7606_init(struct ad7606_dev **device,
+		    struct ad7606_init_param *init_param);
+int32_t ad7606_remove(struct ad7606_dev *dev);
+#endif /* AD7606_H_ */