File content as of revision 0:e8a1ba50c46b:

/***************************************************************************//**
 *   @file   AD5933.h
 *   @brief  Header file of AD5933 Driver.
 *   @author DBogdan (dragos.bogdan@analog.com)
********************************************************************************
 * Copyright 2012(c) Analog Devices, Inc.
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *  - Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *  - Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *  - Neither the name of Analog Devices, Inc. nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *  - The use of this software may or may not infringe the patent rights
 *    of one or more patent holders.  This license does not release you
 *    from the requirement that you obtain separate licenses from these
 *    patent holders to use this software.
 *  - Use of the software either in source or binary form, must be run
 *    on or directly connected to an Analog Devices Inc. component.
 *
 * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************/
#ifndef __AD5933_H__
#define __AD5933_H__

#include <math.h>

#ifndef M_PI
#define M_PI 3.14159265359
#endif
const double radToDeg180ovPi = 180 / M_PI;

/******************************************************************************/
/************************** AD5933 Definitions ********************************/
/******************************************************************************/

/* AD5933 Registers */
#define AD5933_REG_CONTROL_HB       0x80    // HB of the Control register
#define AD5933_REG_CONTROL_LB       0x81    // LB of the Control register
#define AD5933_REG_FREQ_START       0x82    // Start frequency
#define AD5933_REG_FREQ_INC         0x85    // Frequency increment
#define AD5933_REG_INC_NUM          0x88    // Number of increments
#define AD5933_REG_SETTLING_CYCLES  0x8A    // Number of settling time cycles
#define AD5933_REG_STATUS           0x8F    // Status
#define AD5933_REG_TEMP_DATA        0x92    // Temperature data
#define AD5933_REG_REAL_DATA        0x94    // Real data
#define AD5933_REG_IMAG_DATA        0x96    // Imaginary data

/* AD5933_REG_CONTROL_HB Bits */
#define AD5933_CONTROL_FUNCTION(x)  ((x) << 4)
#define AD5933_CONTROL_RANGE(x)     ((x) << 1)
#define AD5933_CONTROL_PGA_GAIN(x)  ((x) << 0)

/* AD5933_REG_CONTROL_LB Bits */
#define AD5933_CONTROL_RESET        (0x1 << 4)
#define AD5933_CONTROL_INT_SYSCLK   (0x0 << 3)
#define AD5933_CONTROL_EXT_SYSCLK   (0x1 << 3)

/* AD5933_CONTROL_FUNCTION(x) options */
#define AD5933_FUNCTION_NOP                 0x0
#define AD5933_FUNCTION_INIT_START_FREQ     0x1
#define AD5933_FUNCTION_START_SWEEP         0x2
#define AD5933_FUNCTION_INC_FREQ            0x3
#define AD5933_FUNCTION_REPEAT_FREQ         0x4
#define AD5933_FUNCTION_MEASURE_TEMP        0x9
#define AD5933_FUNCTION_POWER_DOWN          0xA
#define AD5933_FUNCTION_STANDBY             0xB

/* AD5933_CONTROL_RANGE(x) options */
#define AD5933_RANGE_2000mVpp       0x0
#define AD5933_RANGE_200mVpp        0x1
#define AD5933_RANGE_400mVpp        0x2
#define AD5933_RANGE_1000mVpp       0x3

/* AD5933_CONTROL_PGA_GAIN(x) options */
#define AD5933_GAIN_X5              0
#define AD5933_GAIN_X1              1

/* AD5933 Default number of settling cycles */
#define AD5933_15_CYCLES			15

/* AD5933 settling cycles mulitiplier */
#define AD5933_SETTLING_X1			0
#define AD5933_SETTLING_X2			1
#define AD5933_SETTLING_X4			3

/* AD5933_REG_STATUS Bits */
#define AD5933_STAT_TEMP_VALID      (0x1 << 0)
#define AD5933_STAT_DATA_VALID      (0x1 << 1)
#define AD5933_STAT_SWEEP_DONE      (0x1 << 2)

/* AD5933 Address */
#define AD5933_ADDRESS              0x0D

/* AD5933 Block Commands */
#define AD5933_BLOCK_WRITE          0xA0
#define AD5933_BLOCK_READ           0xA1
#define AD5933_ADDR_POINTER         0xB0

/* AD5933 Specifications */
#define AD5933_INTERNAL_SYS_CLK     16000000ul      // 16MHz
#define AD5933_MAX_INC_NUM          511             // Maximum increment number
#define AD5933_MAX_SETTLING_CYCLES  511             

/******************************************************************************/
/*************************** Types Declarations *******************************/
/******************************************************************************/

struct ad5933_dev {
	/* I2C */
	i2c_desc	*i2c_desc;
	/* Device Settings */
	uint32_t current_sys_clk;
	uint8_t current_clock_source;
	uint8_t current_gain;
	uint8_t current_range;
	uint16_t current_settling;
};

struct ad5933_init_param {
	/* I2C */
	i2c_init_param	i2c_init;
	/* Device Settings */
	uint32_t current_sys_clk;
	uint8_t current_clock_source;
	uint8_t current_gain;
	uint8_t current_range;
	uint16_t current_settling;
};

typedef struct ad5933_result {
	double  		magnitude;
	double 			phase;
}ad5933_result;

/******************************************************************************/
/************************ Functions Declarations ******************************/
/******************************************************************************/

/*! Initializes the communication peripheral. */
int32_t ad5933_init(struct ad5933_dev **device,
		    struct ad5933_init_param init_param);

/*! Free the resources allocated by ad5686_init(). */
int32_t ad5933_remove(struct ad5933_dev *dev);

/*! Writes data into a register. */
void ad5933_set_register_value(struct ad5933_dev *dev,
			       uint8_t register_address,
			       uint32_t register_value,
			       uint8_t bytes_number);

/*! Reads the value of a register. */
uint32_t ad5933_get_register_value(struct ad5933_dev *dev,
				   uint8_t register_address,
				   uint8_t bytes_number);

/*! Resets the device. */
void ad5933_reset(struct ad5933_dev *dev);

/*! Selects the source of the system clock. */
void ad5933_set_system_clk(struct ad5933_dev *dev,
			   int8_t clk_source,
			   uint32_t ext_clk_freq);

/*! Selects the range and gain of the device. */
void ad5933_set_range_and_gain(struct ad5933_dev *dev,
			       int8_t range,
			       int8_t gain);

/*! Reads the temp. from the part and returns the data in degrees Celsius. */
float ad5933_get_temperature(struct ad5933_dev *dev);

/*! Configures the sweep parameters. */
void ad5933_config_sweep(struct ad5933_dev *dev,
			 uint32_t  start_freq,
			 uint32_t  inc_freq,
			 uint16_t inc_num);

/*! Starts the sweep operation. */
void ad5933_start_sweep(struct ad5933_dev *dev);

/*! Reads the real and the imaginary data and calculates the Gain Factor. */
double ad5933_calculate_gain_factor(struct ad5933_dev *dev,
				    uint32_t calibration_impedance,
				    uint8_t freq_function);

/*! Reads the real and the imaginary data and calculates the Impedance. */
ad5933_result ad5933_calculate_impedance(struct ad5933_dev *dev,
				  double gain_factor,
				  uint8_t freq_function);

void ad5933_set_settling_time(struct ad5933_dev *dev,
				uint8_t		mulitplier,
				uint16_t	number_cycles);

#endif /* __AD5933_H__ */