File content as of revision 8:c37e57032093:

/*!
* Copyright (c) 2015, Freescale Semiconductor, Inc.
* All rights reserved.
*
* \file ConnectivityMenus.c
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
*   of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
*   list of conditions and the following disclaimer in the documentation and/or
*   other materials provided with the distribution.
*
* o Neither the name of Freescale Semiconductor, Inc. nor the names of its
*   contributors may be used to endorse or promote products derived from this
*   software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/

#include "ConnectivityMenus.h"

/************************************************************************************
*************************************************************************************
* Public memory declarations
*************************************************************************************
************************************************************************************/

char * const cu8FreescaleLogo[]={  
  "\f\r\n",
  "\n\r\n\r\n\r      #\n",
  "\r     ###\n",
  "\r    ###  *\n",
  "\r     #  ***\n",
  "\r       ***  #\n",
  "\r        *  ###\n",
  "\r          ###\n",
  "\r        *  #\n",
  "\r       ***\n",
  "\r      ***  #\n",
  "\r    #  *  ###\n",
  "\r   ###   ###\n",
  "\r  ###  *  #         F R E E S C A L E\n",
  "\r   #  ***\n",
  "\r     ***            S E M I C O N D U C T O R\n",
  "\r   #  *\n",
  "\r  ###               2 0 1 5\n",
  "\r ###\n",
  "\r  #           Connectivity Test Demo\n\n",
  "\r\n -Press enter to start",
  NULL
};

char * const cu8IupuiLogo[]={   " \r IUPUI DEPARTMENT OF  \n"
 "\r ELECTRICAL  AND COMPUTER ENGINEERING  \n "
      " \r LAB ON THREAD COMMNICATION \n" 
      "\r\n -Press enter to start",
  NULL
    };

/*@CMA, Conn Test. New string*/
char * const cu8MainMenu[]={  
  "\f\r  Connectivity Test Interface short cuts\n",
  "\r------------------------------------------\n",
  "\r -Press [t] for Tx operation\n",
  "\r -Press [r] for Rx operation\n",
  "\r -Press [q] for channel up\n",
  "\r -Press [w] for channel down\n",
  "\r -Press [a] for Power up\n",
  "\r -Press [s] for Power down\n",
  "\r -Press [n] to increase the Payload\n",
  "\r -Press [m] to decrease the Payload\n",
  "\r -Press [k] to increase CCA Threshold in Carrier Sense Test\n",
  "\r -Press [l] to decrease CCA Threshold in Carrier Sense Test\n",
  "\r These keys can be used all over the application to change \n",
  "\r the test parameters\n",
  "\r  ________________________________\n",
  "\r |                                |\n",
  "\r |   Select the Test to perform   |\n",
  "\r |________________________________|\n",
  "\r -Press [1] Continuous tests\n",
  "\r -Press [2] Packet Error Rate test\n",
  "\r -Press [3] Range test\n",
  "\r -Press [4] Carrier Sense and Transmission Control menu\n",
  "\r -Press [5] Radio registers edit\n",
  "\r -Press [p] Reset MCU\n\r\n",
  NULL
};

/*@CMA, Conn Test. New string*/
char * const cu8ShortCutsBar[]={ 
  "\f\r\n",
  "\r----------------------------------------------------\n",
  "\r   [t] Tx   [q] Ch+  [a] Pw+  [n] Pyld+  [l] CCAThr-\n",  
  "\r   [r] Rx   [w] Ch-  [s] Pw-  [m] Pyld-  [k] CCAThr+\n",  
  "\r----------------------------------------------------\n\r",
  NULL
};

char * const cu8ContinuousTestMenu[]={ 
  "\r __________________________ \n",
  "\r|                          |\n",
  "\r|   Continuous Test Menu   |\n",
  "\r|__________________________|\n\r\n",
  "\r-Press [1] Idle\n",
  "\r-Press [2] Burst PRBS Transmission using packet mode\n",
  "\r-Press [3] Continuous Modulated Transmission\n",
  "\r-Press [4] Continuous Unmodulated Transmission\n",
  "\r-Press [5] Continuous Reception\n",
  "\r-Press [6] Continuous Energy Detect\n",
  "\r-Press [7] Continuous Scan\n",
  "\r-Press [8] Continuous Cca\n"
  "\r-Press [p] Previous Menu\n\r\n",
  "\rNow Running: ",
  NULL
};

char * const cu8PerTxTestMenu[]={ 
  "\r  ____________________________ \n",
  "\r |                            |\n",
  "\r |      PER Tx Test Menu      |\n",
  "\r |____________________________|\n\r\n",
  "\r  Choose the amount of packets to send:\n",
  "\r [0] - 1     Packet     [1] - 25    Packets\n",
  "\r [2] - 100   Packets    [3] - 500   Packets\n",
  "\r [4] - 1000  Packets    [5] - 2000  Packets\n",
  "\r [6] - 5000  Packets    [7] - 10000 Packets\n",
  "\r [8] - 65535 Packets\n\r\n",
  "\r-Press [p] Previous Menu\n\r\n",
  NULL
};

char * const cu8PerRxTestMenu[]={ 
  "\r  ______________________ \n",
  "\r |                      |\n",
  "\r |   PER Rx Test Menu   |\n",
  "\r |______________________|\n\r\n",
  "\r -Press [space bar] to start/stop Receiving Packets\n",
  "\r -Press [p] Previous Menu\n\r\n",
  NULL
};

char * const cu8RangeTxTestMenu[]={ 
  "\r  ________________________ \n",
  "\r |                        |\n",
  "\r |   Range Tx Test Menu   |\n",
  "\r |________________________|\n\r\n",
  "\r -Press [space bar] to start/stop Transmiting Packets\n",
  "\r -Press [p] Previous Menu\n\r\n",
  NULL
};

char * const cu8RangeRxTestMenu[]={ 
  "\r  ________________________ \n",
  "\r |                        |\n",
  "\r |   Range Rx Test Menu   |\n",
  "\r |________________________|\n\r\n",
  "\r -Press [space bar] to start/stop Receiving Packets\n",
  "\r -Press [p] Previous Menu\n\r\n",
  NULL
};

/*@CMA, Conn Test. New menu*/
char * const cu8RadioRegistersEditMenu[]={ 
  "\r   ____________________________ \n",
  "\r  |                            |\n",
  "\r  | Radio Registers Edit Menu  |\n",
  "\r  |____________________________|\n\r\n",
  "\r  -Press [1] Write Direct Registers\n",
  "\r  -Press [2] Read  Direct Registers\n",
  "\r  -Press [3] Write Indirect Registers\n",
  "\r  -Press [4] Read  Indirect Registers\n",
  "\r  -Press [5] Dump  All Registers\n",
  "\r  -Press [p] Previous Menu\n\r\n",
  NULL
};

char * const cu8RadioCSTCSelectMenu[]={ 
  "\r   ___________________________________________________________ \n",
  "\r  |                                                           |\n",
  "\r  | Radio Carrier Sense and Transmission Control Select Menu  |\n",
  "\r  |___________________________________________________________|\n\r\n",
  "\r  -Press [1] Carrier Sense Test with un-modulation input signal\n",
  "\r  -Press [2] Transmission Control Test\n",
  "\r  -Press [p] Previous Menu\n\r\n",
  NULL
};

char * const cu8CsTcTestMenu[]={ 
  "\r  ____________________________ \n",
  "\r |                            |\n",
  "\r |     Tr Ctrl Test Menu      |\n",
  "\r |____________________________|\n\r\n",
  "\r  Choose the amount of packets to send:\n",
  "\r [0] - 1     Packet     [1] - 25    Packets\n",
  "\r [2] - 100   Packets    [3] - 500   Packets\n",
  "\r [4] - 1000  Packets    [5] - 2000  Packets\n",
  "\r [6] - 5000  Packets    [7] - 10000 Packets\n",
  "\r [8] - 65535 Packets\n\r\n",
  "\r-Press [p] Previous Menu\n\r\n",
  NULL
};

char * const cu8SelectTags[] ={
  " Channel select ",
  "  Power select  ",
  " Test Tx select ",
  " Test Rx select ",
  "Trim coarse tune",
  " Trim fine tune "
};

char * const cu8TxTestTags[] ={
  "     PER Tx     ",
  "    Range Tx    ",
  "   Cont. Idle   ",
  "  Cont. PRBS9   ",
  "Cont. Modulated ",
  "Cont. Unmodulatd"
};

char * const cu8RxTestTags[] ={
  "     PER Rx     ",
  "    Range Rx    ",
  "Cont. Reception ",
  "   Cont. Scan   ",
  "Cont.Energy Det."
};

char * const cu8TxModTestTags[] ={
  "0's\r\n",
  "1's\r\n",
  "\b\b\b\b\b PN9\r\n"
};

char * const cu8ContinuousTestTags[] ={
  "Idle mode",
  "Continuous Tx Modulated - All ",
  "Continuous Tx Unmodulated",
  "Continuous PRBS9"
};

/************************************************************************************
*************************************************************************************
* Private prototypes
*************************************************************************************
************************************************************************************/


/************************************************************************************
*************************************************************************************
* Private memory declarations
*************************************************************************************
************************************************************************************/


/************************************************************************************
*************************************************************************************
* Interface functions
*************************************************************************************
************************************************************************************/

/************************************************************************************
*************************************************************************************
* private functions
*************************************************************************************
************************************************************************************/