PHung Tung / DISCO-F746_WAV_PLAYER

SPKT

Dependencies:   F746_GUI SD_PlayerSkeleton F746_SAI_IO

SRC_STM32F7/targets/hal/TARGET_STM/TARGET_STM32F7/TARGET_DISCO_F746NG/PeripheralPins.c@0:8ede47d38d10, 2019-06-04 (annotated)

Committer:
phungductung
Date:
Tue Jun 04 21:37:21 2019 +0000
Revision:
0:8ede47d38d10
SPKT

Who changed what in which revision?

UserRevisionLine numberNew contents of line
phungductung 0:8ede47d38d10 1 /* mbed Microcontroller Library
phungductung 0:8ede47d38d10 2 *******************************************************************************
phungductung 0:8ede47d38d10 3 * Copyright (c) 2015, STMicroelectronics
phungductung 0:8ede47d38d10 4 * All rights reserved.
phungductung 0:8ede47d38d10 5 *
phungductung 0:8ede47d38d10 6 * Redistribution and use in source and binary forms, with or without
phungductung 0:8ede47d38d10 7 * modification, are permitted provided that the following conditions are met:
phungductung 0:8ede47d38d10 8 *
phungductung 0:8ede47d38d10 9 * 1. Redistributions of source code must retain the above copyright notice,
phungductung 0:8ede47d38d10 10 * this list of conditions and the following disclaimer.
phungductung 0:8ede47d38d10 11 * 2. Redistributions in binary form must reproduce the above copyright notice,
phungductung 0:8ede47d38d10 12 * this list of conditions and the following disclaimer in the documentation
phungductung 0:8ede47d38d10 13 * and/or other materials provided with the distribution.
phungductung 0:8ede47d38d10 14 * 3. Neither the name of STMicroelectronics nor the names of its contributors
phungductung 0:8ede47d38d10 15 * may be used to endorse or promote products derived from this software
phungductung 0:8ede47d38d10 16 * without specific prior written permission.
phungductung 0:8ede47d38d10 17 *
phungductung 0:8ede47d38d10 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
phungductung 0:8ede47d38d10 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
phungductung 0:8ede47d38d10 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
phungductung 0:8ede47d38d10 21 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
phungductung 0:8ede47d38d10 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
phungductung 0:8ede47d38d10 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
phungductung 0:8ede47d38d10 24 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
phungductung 0:8ede47d38d10 25 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
phungductung 0:8ede47d38d10 26 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
phungductung 0:8ede47d38d10 27 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
phungductung 0:8ede47d38d10 28 *******************************************************************************
phungductung 0:8ede47d38d10 29 */
phungductung 0:8ede47d38d10 30
phungductung 0:8ede47d38d10 31 #include "PeripheralPins.h"
phungductung 0:8ede47d38d10 32
phungductung 0:8ede47d38d10 33 // =============================================================================
phungductung 0:8ede47d38d10 34 // Notes:
phungductung 0:8ede47d38d10 35 // * Commented lines are alternative possibilities which are not used per default.
phungductung 0:8ede47d38d10 36 // If you change them, you will have also to modify the corresponding xxx_api.c file
phungductung 0:8ede47d38d10 37 // for pwmout, analogin, analogout, ...
phungductung 0:8ede47d38d10 38 // * Only the pins that are placed on the Arduino connector are described.
phungductung 0:8ede47d38d10 39 // =============================================================================
phungductung 0:8ede47d38d10 40
phungductung 0:8ede47d38d10 41 //*** ADC ***
phungductung 0:8ede47d38d10 42
phungductung 0:8ede47d38d10 43 const PinMap PinMap_ADC[] = {
phungductung 0:8ede47d38d10 44 {PA_0, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC3_IN0 - ARDUINO A0
phungductung 0:8ede47d38d10 45 {PF_6, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_IN4 - ARDUINO A5
phungductung 0:8ede47d38d10 46 {PF_7, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5 - ARDUINO A4
phungductung 0:8ede47d38d10 47 {PF_8, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC3_IN6 - ARDUINO A3
phungductung 0:8ede47d38d10 48 {PF_9, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC3_IN7 - ARDUINO A2
phungductung 0:8ede47d38d10 49 {PF_10, ADC_3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC3_IN8 - ARDUINO A1
phungductung 0:8ede47d38d10 50 {NC, NC, 0}
phungductung 0:8ede47d38d10 51 };
phungductung 0:8ede47d38d10 52
phungductung 0:8ede47d38d10 53 //*** DAC ***
phungductung 0:8ede47d38d10 54
phungductung 0:8ede47d38d10 55 const PinMap PinMap_DAC[] = {
phungductung 0:8ede47d38d10 56 {PA_4, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF, 1, 0)}, // DAC_OUT1
phungductung 0:8ede47d38d10 57 {PA_5, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0xFF, 2, 0)}, // DAC_OUT2
phungductung 0:8ede47d38d10 58 {NC, NC, 0}
phungductung 0:8ede47d38d10 59 };
phungductung 0:8ede47d38d10 60
phungductung 0:8ede47d38d10 61 //*** I2C ***
phungductung 0:8ede47d38d10 62
phungductung 0:8ede47d38d10 63 const PinMap PinMap_I2C_SDA[] = {
phungductung 0:8ede47d38d10 64 {PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO D14
phungductung 0:8ede47d38d10 65 {NC, NC, 0}
phungductung 0:8ede47d38d10 66 };
phungductung 0:8ede47d38d10 67
phungductung 0:8ede47d38d10 68 const PinMap PinMap_I2C_SCL[] = {
phungductung 0:8ede47d38d10 69 {PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // ARDUINO D15
phungductung 0:8ede47d38d10 70 {NC, NC, 0}
phungductung 0:8ede47d38d10 71 };
phungductung 0:8ede47d38d10 72
phungductung 0:8ede47d38d10 73 //*** PWM ***
phungductung 0:8ede47d38d10 74
phungductung 0:8ede47d38d10 75 const PinMap PinMap_PWM[] = {
phungductung 0:8ede47d38d10 76 {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - ARDUINO A0
phungductung 0:8ede47d38d10 77 // {PA_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1 - ARDUINO A0 (used by us_ticker)
phungductung 0:8ede47d38d10 78 {PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1 - ARDUINO D5
phungductung 0:8ede47d38d10 79 {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - ARDUINO D9
phungductung 0:8ede47d38d10 80 {PB_4, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - ARDUINO D3
phungductung 0:8ede47d38d10 81 {PB_8, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 - ARDUINO D15
phungductung 0:8ede47d38d10 82 // {PB_8, PWM_10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM1, 1, 0)}, // TIM10_CH1 - ARDUINO D15
phungductung 0:8ede47d38d10 83 {PB_9, PWM_4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 - ARDUINO D14
phungductung 0:8ede47d38d10 84 // {PB_9, PWM_11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 - ARDUINO D14
phungductung 0:8ede47d38d10 85 // {PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N - ARDUINO D12
phungductung 0:8ede47d38d10 86 // {PB_14, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N - ARDUINO D12
phungductung 0:8ede47d38d10 87 {PB_14, PWM_12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1 - ARDUINO D12
phungductung 0:8ede47d38d10 88 // {PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N - ARDUINO D11
phungductung 0:8ede47d38d10 89 // {PB_15, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N - ARDUINO D11
phungductung 0:8ede47d38d10 90 {PB_15, PWM_12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 2, 0)}, // TIM12_CH2 - ARDUINO D11
phungductung 0:8ede47d38d10 91 // {PC_6, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - ARDUINO D1
phungductung 0:8ede47d38d10 92 {PC_6, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1 - ARDUINO D1
phungductung 0:8ede47d38d10 93 // {PC_7, PWM_3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - ARDUINO D0
phungductung 0:8ede47d38d10 94 {PC_7, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2 - ARDUINO D0
phungductung 0:8ede47d38d10 95 {PF_6, PWM_10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1 - ARDUINO A5
phungductung 0:8ede47d38d10 96 {PF_7, PWM_11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 - ARDUINO A4
phungductung 0:8ede47d38d10 97 {PF_8, PWM_13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1 - ARDUINO A3
phungductung 0:8ede47d38d10 98 {PF_9, PWM_14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1 - ARDUINO A2
phungductung 0:8ede47d38d10 99 {PH_6, PWM_12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1 - ARDUINO D6
phungductung 0:8ede47d38d10 100 // {PI_0, PWM_5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4 - ARDUINO D10 (used by us_ticker)
phungductung 0:8ede47d38d10 101 {PI_2, PWM_8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4 - ARDUINO D8
phungductung 0:8ede47d38d10 102 {NC, NC, 0}
phungductung 0:8ede47d38d10 103 };
phungductung 0:8ede47d38d10 104
phungductung 0:8ede47d38d10 105 //*** SERIAL ***
phungductung 0:8ede47d38d10 106
phungductung 0:8ede47d38d10 107 const PinMap PinMap_UART_TX[] = {
phungductung 0:8ede47d38d10 108 {PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, // ARDUINO A0
phungductung 0:8ede47d38d10 109 {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Virtual Com Port
phungductung 0:8ede47d38d10 110 {PC_6, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // ARDUINO D1
phungductung 0:8ede47d38d10 111 {PF_7, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)}, // ARDUINO A4
phungductung 0:8ede47d38d10 112 {NC, NC, 0}
phungductung 0:8ede47d38d10 113 };
phungductung 0:8ede47d38d10 114
phungductung 0:8ede47d38d10 115 const PinMap PinMap_UART_RX[] = {
phungductung 0:8ede47d38d10 116 {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Virtual Com Port
phungductung 0:8ede47d38d10 117 {PC_7, UART_6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)}, // ARDUINO D0
phungductung 0:8ede47d38d10 118 {PF_6, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART7)}, // ARDUINO A5
phungductung 0:8ede47d38d10 119 {NC, NC, 0}
phungductung 0:8ede47d38d10 120 };
phungductung 0:8ede47d38d10 121
phungductung 0:8ede47d38d10 122 //*** SPI ***
phungductung 0:8ede47d38d10 123
phungductung 0:8ede47d38d10 124 const PinMap PinMap_SPI_MOSI[] = {
phungductung 0:8ede47d38d10 125 {PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D11
phungductung 0:8ede47d38d10 126 {PF_9, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, // ARDUINO A2
phungductung 0:8ede47d38d10 127 {PI_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D7
phungductung 0:8ede47d38d10 128 {NC, NC, 0}
phungductung 0:8ede47d38d10 129 };
phungductung 0:8ede47d38d10 130
phungductung 0:8ede47d38d10 131 const PinMap PinMap_SPI_MISO[] = {
phungductung 0:8ede47d38d10 132 {PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D12
phungductung 0:8ede47d38d10 133 {PF_8, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, // ARDUINO A3
phungductung 0:8ede47d38d10 134 {PI_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D8
phungductung 0:8ede47d38d10 135 {NC, NC, 0}
phungductung 0:8ede47d38d10 136 };
phungductung 0:8ede47d38d10 137
phungductung 0:8ede47d38d10 138 const PinMap PinMap_SPI_SCLK[] = {
phungductung 0:8ede47d38d10 139 {PF_7, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, // ARDUINO A4
phungductung 0:8ede47d38d10 140 {PH_6, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, // ARDUINO D6
phungductung 0:8ede47d38d10 141 {PI_1, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D13
phungductung 0:8ede47d38d10 142 {NC, NC, 0}
phungductung 0:8ede47d38d10 143 };
phungductung 0:8ede47d38d10 144
phungductung 0:8ede47d38d10 145 const PinMap PinMap_SPI_SSEL[] = {
phungductung 0:8ede47d38d10 146 {PB_4, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF7_SPI2)}, // ARDUINO D3
phungductung 0:8ede47d38d10 147 {PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D14
phungductung 0:8ede47d38d10 148 {PF_6, SPI_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI5)}, // ARDUINO A5
phungductung 0:8ede47d38d10 149 {PI_0, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // ARDUINO D10
phungductung 0:8ede47d38d10 150 {NC, NC, 0}
phungductung 0:8ede47d38d10 151 };