PHung Tung / DISCO-F746_WAV_PLAYER

SPKT

Dependencies:   F746_GUI SD_PlayerSkeleton F746_SAI_IO

SRC_STM32F7/targets/cmsis/TARGET_STM/TARGET_STM32F7/stm32f7xx_hal_sd.h@0:8ede47d38d10, 2019-06-04 (annotated)

Committer:
phungductung
Date:
Tue Jun 04 21:37:21 2019 +0000
Revision:
0:8ede47d38d10
SPKT

Who changed what in which revision?

UserRevisionLine numberNew contents of line
phungductung 0:8ede47d38d10 1 /**
phungductung 0:8ede47d38d10 2 ******************************************************************************
phungductung 0:8ede47d38d10 3 * @file stm32f7xx_hal_sd.h
phungductung 0:8ede47d38d10 4 * @author MCD Application Team
phungductung 0:8ede47d38d10 5 * @version V1.0.4
phungductung 0:8ede47d38d10 6 * @date 09-December-2015
phungductung 0:8ede47d38d10 7 * @brief Header file of SD HAL module.
phungductung 0:8ede47d38d10 8 ******************************************************************************
phungductung 0:8ede47d38d10 9 * @attention
phungductung 0:8ede47d38d10 10 *
phungductung 0:8ede47d38d10 11 * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
phungductung 0:8ede47d38d10 12 *
phungductung 0:8ede47d38d10 13 * Redistribution and use in source and binary forms, with or without modification,
phungductung 0:8ede47d38d10 14 * are permitted provided that the following conditions are met:
phungductung 0:8ede47d38d10 15 * 1. Redistributions of source code must retain the above copyright notice,
phungductung 0:8ede47d38d10 16 * this list of conditions and the following disclaimer.
phungductung 0:8ede47d38d10 17 * 2. Redistributions in binary form must reproduce the above copyright notice,
phungductung 0:8ede47d38d10 18 * this list of conditions and the following disclaimer in the documentation
phungductung 0:8ede47d38d10 19 * and/or other materials provided with the distribution.
phungductung 0:8ede47d38d10 20 * 3. Neither the name of STMicroelectronics nor the names of its contributors
phungductung 0:8ede47d38d10 21 * may be used to endorse or promote products derived from this software
phungductung 0:8ede47d38d10 22 * without specific prior written permission.
phungductung 0:8ede47d38d10 23 *
phungductung 0:8ede47d38d10 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
phungductung 0:8ede47d38d10 25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
phungductung 0:8ede47d38d10 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
phungductung 0:8ede47d38d10 27 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
phungductung 0:8ede47d38d10 28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
phungductung 0:8ede47d38d10 29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
phungductung 0:8ede47d38d10 30 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
phungductung 0:8ede47d38d10 31 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
phungductung 0:8ede47d38d10 32 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
phungductung 0:8ede47d38d10 33 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
phungductung 0:8ede47d38d10 34 *
phungductung 0:8ede47d38d10 35 ******************************************************************************
phungductung 0:8ede47d38d10 36 */
phungductung 0:8ede47d38d10 37
phungductung 0:8ede47d38d10 38 /* Define to prevent recursive inclusion -------------------------------------*/
phungductung 0:8ede47d38d10 39 #ifndef __STM32F7xx_HAL_SD_H
phungductung 0:8ede47d38d10 40 #define __STM32F7xx_HAL_SD_H
phungductung 0:8ede47d38d10 41
phungductung 0:8ede47d38d10 42 #ifdef __cplusplus
phungductung 0:8ede47d38d10 43 extern "C" {
phungductung 0:8ede47d38d10 44 #endif
phungductung 0:8ede47d38d10 45
phungductung 0:8ede47d38d10 46 /* Includes ------------------------------------------------------------------*/
phungductung 0:8ede47d38d10 47 #include "stm32f7xx_ll_sdmmc.h"
phungductung 0:8ede47d38d10 48
phungductung 0:8ede47d38d10 49 /** @addtogroup STM32F7xx_HAL_Driver
phungductung 0:8ede47d38d10 50 * @{
phungductung 0:8ede47d38d10 51 */
phungductung 0:8ede47d38d10 52
phungductung 0:8ede47d38d10 53 /** @defgroup SD SD
phungductung 0:8ede47d38d10 54 * @brief SD HAL module driver
phungductung 0:8ede47d38d10 55 * @{
phungductung 0:8ede47d38d10 56 */
phungductung 0:8ede47d38d10 57
phungductung 0:8ede47d38d10 58 /* Exported types ------------------------------------------------------------*/
phungductung 0:8ede47d38d10 59 /** @defgroup SD_Exported_Types SD Exported Types
phungductung 0:8ede47d38d10 60 * @{
phungductung 0:8ede47d38d10 61 */
phungductung 0:8ede47d38d10 62
phungductung 0:8ede47d38d10 63 /** @defgroup SD_Exported_Types_Group1 SD Handle Structure definition
phungductung 0:8ede47d38d10 64 * @{
phungductung 0:8ede47d38d10 65 */
phungductung 0:8ede47d38d10 66 #define SD_InitTypeDef SDMMC_InitTypeDef
phungductung 0:8ede47d38d10 67 #define SD_TypeDef SDMMC_TypeDef
phungductung 0:8ede47d38d10 68
phungductung 0:8ede47d38d10 69 typedef struct
phungductung 0:8ede47d38d10 70 {
phungductung 0:8ede47d38d10 71 SD_TypeDef *Instance; /*!< SDMMC register base address */
phungductung 0:8ede47d38d10 72
phungductung 0:8ede47d38d10 73 SD_InitTypeDef Init; /*!< SD required parameters */
phungductung 0:8ede47d38d10 74
phungductung 0:8ede47d38d10 75 HAL_LockTypeDef Lock; /*!< SD locking object */
phungductung 0:8ede47d38d10 76
phungductung 0:8ede47d38d10 77 uint32_t CardType; /*!< SD card type */
phungductung 0:8ede47d38d10 78
phungductung 0:8ede47d38d10 79 uint32_t RCA; /*!< SD relative card address */
phungductung 0:8ede47d38d10 80
phungductung 0:8ede47d38d10 81 uint32_t CSD[4]; /*!< SD card specific data table */
phungductung 0:8ede47d38d10 82
phungductung 0:8ede47d38d10 83 uint32_t CID[4]; /*!< SD card identification number table */
phungductung 0:8ede47d38d10 84
phungductung 0:8ede47d38d10 85 __IO uint32_t SdTransferCplt; /*!< SD transfer complete flag in non blocking mode */
phungductung 0:8ede47d38d10 86
phungductung 0:8ede47d38d10 87 __IO uint32_t SdTransferErr; /*!< SD transfer error flag in non blocking mode */
phungductung 0:8ede47d38d10 88
phungductung 0:8ede47d38d10 89 __IO uint32_t DmaTransferCplt; /*!< SD DMA transfer complete flag */
phungductung 0:8ede47d38d10 90
phungductung 0:8ede47d38d10 91 __IO uint32_t SdOperation; /*!< SD transfer operation (read/write) */
phungductung 0:8ede47d38d10 92
phungductung 0:8ede47d38d10 93 DMA_HandleTypeDef *hdmarx; /*!< SD Rx DMA handle parameters */
phungductung 0:8ede47d38d10 94
phungductung 0:8ede47d38d10 95 DMA_HandleTypeDef *hdmatx; /*!< SD Tx DMA handle parameters */
phungductung 0:8ede47d38d10 96
phungductung 0:8ede47d38d10 97 }SD_HandleTypeDef;
phungductung 0:8ede47d38d10 98 /**
phungductung 0:8ede47d38d10 99 * @}
phungductung 0:8ede47d38d10 100 */
phungductung 0:8ede47d38d10 101
phungductung 0:8ede47d38d10 102 /** @defgroup SD_Exported_Types_Group2 Card Specific Data: CSD Register
phungductung 0:8ede47d38d10 103 * @{
phungductung 0:8ede47d38d10 104 */
phungductung 0:8ede47d38d10 105 typedef struct
phungductung 0:8ede47d38d10 106 {
phungductung 0:8ede47d38d10 107 __IO uint8_t CSDStruct; /*!< CSD structure */
phungductung 0:8ede47d38d10 108 __IO uint8_t SysSpecVersion; /*!< System specification version */
phungductung 0:8ede47d38d10 109 __IO uint8_t Reserved1; /*!< Reserved */
phungductung 0:8ede47d38d10 110 __IO uint8_t TAAC; /*!< Data read access time 1 */
phungductung 0:8ede47d38d10 111 __IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */
phungductung 0:8ede47d38d10 112 __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */
phungductung 0:8ede47d38d10 113 __IO uint16_t CardComdClasses; /*!< Card command classes */
phungductung 0:8ede47d38d10 114 __IO uint8_t RdBlockLen; /*!< Max. read data block length */
phungductung 0:8ede47d38d10 115 __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */
phungductung 0:8ede47d38d10 116 __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */
phungductung 0:8ede47d38d10 117 __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */
phungductung 0:8ede47d38d10 118 __IO uint8_t DSRImpl; /*!< DSR implemented */
phungductung 0:8ede47d38d10 119 __IO uint8_t Reserved2; /*!< Reserved */
phungductung 0:8ede47d38d10 120 __IO uint32_t DeviceSize; /*!< Device Size */
phungductung 0:8ede47d38d10 121 __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */
phungductung 0:8ede47d38d10 122 __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */
phungductung 0:8ede47d38d10 123 __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */
phungductung 0:8ede47d38d10 124 __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */
phungductung 0:8ede47d38d10 125 __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */
phungductung 0:8ede47d38d10 126 __IO uint8_t EraseGrSize; /*!< Erase group size */
phungductung 0:8ede47d38d10 127 __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */
phungductung 0:8ede47d38d10 128 __IO uint8_t WrProtectGrSize; /*!< Write protect group size */
phungductung 0:8ede47d38d10 129 __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */
phungductung 0:8ede47d38d10 130 __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */
phungductung 0:8ede47d38d10 131 __IO uint8_t WrSpeedFact; /*!< Write speed factor */
phungductung 0:8ede47d38d10 132 __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */
phungductung 0:8ede47d38d10 133 __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */
phungductung 0:8ede47d38d10 134 __IO uint8_t Reserved3; /*!< Reserved */
phungductung 0:8ede47d38d10 135 __IO uint8_t ContentProtectAppli; /*!< Content protection application */
phungductung 0:8ede47d38d10 136 __IO uint8_t FileFormatGrouop; /*!< File format group */
phungductung 0:8ede47d38d10 137 __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */
phungductung 0:8ede47d38d10 138 __IO uint8_t PermWrProtect; /*!< Permanent write protection */
phungductung 0:8ede47d38d10 139 __IO uint8_t TempWrProtect; /*!< Temporary write protection */
phungductung 0:8ede47d38d10 140 __IO uint8_t FileFormat; /*!< File format */
phungductung 0:8ede47d38d10 141 __IO uint8_t ECC; /*!< ECC code */
phungductung 0:8ede47d38d10 142 __IO uint8_t CSD_CRC; /*!< CSD CRC */
phungductung 0:8ede47d38d10 143 __IO uint8_t Reserved4; /*!< Always 1 */
phungductung 0:8ede47d38d10 144
phungductung 0:8ede47d38d10 145 }HAL_SD_CSDTypedef;
phungductung 0:8ede47d38d10 146 /**
phungductung 0:8ede47d38d10 147 * @}
phungductung 0:8ede47d38d10 148 */
phungductung 0:8ede47d38d10 149
phungductung 0:8ede47d38d10 150 /** @defgroup SD_Exported_Types_Group3 Card Identification Data: CID Register
phungductung 0:8ede47d38d10 151 * @{
phungductung 0:8ede47d38d10 152 */
phungductung 0:8ede47d38d10 153 typedef struct
phungductung 0:8ede47d38d10 154 {
phungductung 0:8ede47d38d10 155 __IO uint8_t ManufacturerID; /*!< Manufacturer ID */
phungductung 0:8ede47d38d10 156 __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */
phungductung 0:8ede47d38d10 157 __IO uint32_t ProdName1; /*!< Product Name part1 */
phungductung 0:8ede47d38d10 158 __IO uint8_t ProdName2; /*!< Product Name part2 */
phungductung 0:8ede47d38d10 159 __IO uint8_t ProdRev; /*!< Product Revision */
phungductung 0:8ede47d38d10 160 __IO uint32_t ProdSN; /*!< Product Serial Number */
phungductung 0:8ede47d38d10 161 __IO uint8_t Reserved1; /*!< Reserved1 */
phungductung 0:8ede47d38d10 162 __IO uint16_t ManufactDate; /*!< Manufacturing Date */
phungductung 0:8ede47d38d10 163 __IO uint8_t CID_CRC; /*!< CID CRC */
phungductung 0:8ede47d38d10 164 __IO uint8_t Reserved2; /*!< Always 1 */
phungductung 0:8ede47d38d10 165
phungductung 0:8ede47d38d10 166 }HAL_SD_CIDTypedef;
phungductung 0:8ede47d38d10 167 /**
phungductung 0:8ede47d38d10 168 * @}
phungductung 0:8ede47d38d10 169 */
phungductung 0:8ede47d38d10 170
phungductung 0:8ede47d38d10 171 /** @defgroup SD_Exported_Types_Group4 SD Card Status returned by ACMD13
phungductung 0:8ede47d38d10 172 * @{
phungductung 0:8ede47d38d10 173 */
phungductung 0:8ede47d38d10 174 typedef struct
phungductung 0:8ede47d38d10 175 {
phungductung 0:8ede47d38d10 176 __IO uint8_t DAT_BUS_WIDTH; /*!< Shows the currently defined data bus width */
phungductung 0:8ede47d38d10 177 __IO uint8_t SECURED_MODE; /*!< Card is in secured mode of operation */
phungductung 0:8ede47d38d10 178 __IO uint16_t SD_CARD_TYPE; /*!< Carries information about card type */
phungductung 0:8ede47d38d10 179 __IO uint32_t SIZE_OF_PROTECTED_AREA; /*!< Carries information about the capacity of protected area */
phungductung 0:8ede47d38d10 180 __IO uint8_t SPEED_CLASS; /*!< Carries information about the speed class of the card */
phungductung 0:8ede47d38d10 181 __IO uint8_t PERFORMANCE_MOVE; /*!< Carries information about the card's performance move */
phungductung 0:8ede47d38d10 182 __IO uint8_t AU_SIZE; /*!< Carries information about the card's allocation unit size */
phungductung 0:8ede47d38d10 183 __IO uint16_t ERASE_SIZE; /*!< Determines the number of AUs to be erased in one operation */
phungductung 0:8ede47d38d10 184 __IO uint8_t ERASE_TIMEOUT; /*!< Determines the timeout for any number of AU erase */
phungductung 0:8ede47d38d10 185 __IO uint8_t ERASE_OFFSET; /*!< Carries information about the erase offset */
phungductung 0:8ede47d38d10 186
phungductung 0:8ede47d38d10 187 }HAL_SD_CardStatusTypedef;
phungductung 0:8ede47d38d10 188 /**
phungductung 0:8ede47d38d10 189 * @}
phungductung 0:8ede47d38d10 190 */
phungductung 0:8ede47d38d10 191
phungductung 0:8ede47d38d10 192 /** @defgroup SD_Exported_Types_Group5 SD Card information structure
phungductung 0:8ede47d38d10 193 * @{
phungductung 0:8ede47d38d10 194 */
phungductung 0:8ede47d38d10 195 typedef struct
phungductung 0:8ede47d38d10 196 {
phungductung 0:8ede47d38d10 197 HAL_SD_CSDTypedef SD_csd; /*!< SD card specific data register */
phungductung 0:8ede47d38d10 198 HAL_SD_CIDTypedef SD_cid; /*!< SD card identification number register */
phungductung 0:8ede47d38d10 199 uint64_t CardCapacity; /*!< Card capacity */
phungductung 0:8ede47d38d10 200 uint32_t CardBlockSize; /*!< Card block size */
phungductung 0:8ede47d38d10 201 uint16_t RCA; /*!< SD relative card address */
phungductung 0:8ede47d38d10 202 uint8_t CardType; /*!< SD card type */
phungductung 0:8ede47d38d10 203
phungductung 0:8ede47d38d10 204 }HAL_SD_CardInfoTypedef;
phungductung 0:8ede47d38d10 205 /**
phungductung 0:8ede47d38d10 206 * @}
phungductung 0:8ede47d38d10 207 */
phungductung 0:8ede47d38d10 208
phungductung 0:8ede47d38d10 209 /** @defgroup SD_Exported_Types_Group6 SD Error status enumeration Structure definition
phungductung 0:8ede47d38d10 210 * @{
phungductung 0:8ede47d38d10 211 */
phungductung 0:8ede47d38d10 212 typedef enum
phungductung 0:8ede47d38d10 213 {
phungductung 0:8ede47d38d10 214 /**
phungductung 0:8ede47d38d10 215 * @brief SD specific error defines
phungductung 0:8ede47d38d10 216 */
phungductung 0:8ede47d38d10 217 SD_CMD_CRC_FAIL = (1), /*!< Command response received (but CRC check failed) */
phungductung 0:8ede47d38d10 218 SD_DATA_CRC_FAIL = (2), /*!< Data block sent/received (CRC check failed) */
phungductung 0:8ede47d38d10 219 SD_CMD_RSP_TIMEOUT = (3), /*!< Command response timeout */
phungductung 0:8ede47d38d10 220 SD_DATA_TIMEOUT = (4), /*!< Data timeout */
phungductung 0:8ede47d38d10 221 SD_TX_UNDERRUN = (5), /*!< Transmit FIFO underrun */
phungductung 0:8ede47d38d10 222 SD_RX_OVERRUN = (6), /*!< Receive FIFO overrun */
phungductung 0:8ede47d38d10 223 SD_START_BIT_ERR = (7), /*!< Start bit not detected on all data signals in wide bus mode */
phungductung 0:8ede47d38d10 224 SD_CMD_OUT_OF_RANGE = (8), /*!< Command's argument was out of range. */
phungductung 0:8ede47d38d10 225 SD_ADDR_MISALIGNED = (9), /*!< Misaligned address */
phungductung 0:8ede47d38d10 226 SD_BLOCK_LEN_ERR = (10), /*!< Transferred block length is not allowed for the card or the number of transferred bytes does not match the block length */
phungductung 0:8ede47d38d10 227 SD_ERASE_SEQ_ERR = (11), /*!< An error in the sequence of erase command occurs. */
phungductung 0:8ede47d38d10 228 SD_BAD_ERASE_PARAM = (12), /*!< An invalid selection for erase groups */
phungductung 0:8ede47d38d10 229 SD_WRITE_PROT_VIOLATION = (13), /*!< Attempt to program a write protect block */
phungductung 0:8ede47d38d10 230 SD_LOCK_UNLOCK_FAILED = (14), /*!< Sequence or password error has been detected in unlock command or if there was an attempt to access a locked card */
phungductung 0:8ede47d38d10 231 SD_COM_CRC_FAILED = (15), /*!< CRC check of the previous command failed */
phungductung 0:8ede47d38d10 232 SD_ILLEGAL_CMD = (16), /*!< Command is not legal for the card state */
phungductung 0:8ede47d38d10 233 SD_CARD_ECC_FAILED = (17), /*!< Card internal ECC was applied but failed to correct the data */
phungductung 0:8ede47d38d10 234 SD_CC_ERROR = (18), /*!< Internal card controller error */
phungductung 0:8ede47d38d10 235 SD_GENERAL_UNKNOWN_ERROR = (19), /*!< General or unknown error */
phungductung 0:8ede47d38d10 236 SD_STREAM_READ_UNDERRUN = (20), /*!< The card could not sustain data transfer in stream read operation. */
phungductung 0:8ede47d38d10 237 SD_STREAM_WRITE_OVERRUN = (21), /*!< The card could not sustain data programming in stream mode */
phungductung 0:8ede47d38d10 238 SD_CID_CSD_OVERWRITE = (22), /*!< CID/CSD overwrite error */
phungductung 0:8ede47d38d10 239 SD_WP_ERASE_SKIP = (23), /*!< Only partial address space was erased */
phungductung 0:8ede47d38d10 240 SD_CARD_ECC_DISABLED = (24), /*!< Command has been executed without using internal ECC */
phungductung 0:8ede47d38d10 241 SD_ERASE_RESET = (25), /*!< Erase sequence was cleared before executing because an out of erase sequence command was received */
phungductung 0:8ede47d38d10 242 SD_AKE_SEQ_ERROR = (26), /*!< Error in sequence of authentication. */
phungductung 0:8ede47d38d10 243 SD_INVALID_VOLTRANGE = (27),
phungductung 0:8ede47d38d10 244 SD_ADDR_OUT_OF_RANGE = (28),
phungductung 0:8ede47d38d10 245 SD_SWITCH_ERROR = (29),
phungductung 0:8ede47d38d10 246 SD_SDMMC_DISABLED = (30),
phungductung 0:8ede47d38d10 247 SD_SDMMC_FUNCTION_BUSY = (31),
phungductung 0:8ede47d38d10 248 SD_SDMMC_FUNCTION_FAILED = (32),
phungductung 0:8ede47d38d10 249 SD_SDMMC_UNKNOWN_FUNCTION = (33),
phungductung 0:8ede47d38d10 250
phungductung 0:8ede47d38d10 251 /**
phungductung 0:8ede47d38d10 252 * @brief Standard error defines
phungductung 0:8ede47d38d10 253 */
phungductung 0:8ede47d38d10 254 SD_INTERNAL_ERROR = (34),
phungductung 0:8ede47d38d10 255 SD_NOT_CONFIGURED = (35),
phungductung 0:8ede47d38d10 256 SD_REQUEST_PENDING = (36),
phungductung 0:8ede47d38d10 257 SD_REQUEST_NOT_APPLICABLE = (37),
phungductung 0:8ede47d38d10 258 SD_INVALID_PARAMETER = (38),
phungductung 0:8ede47d38d10 259 SD_UNSUPPORTED_FEATURE = (39),
phungductung 0:8ede47d38d10 260 SD_UNSUPPORTED_HW = (40),
phungductung 0:8ede47d38d10 261 SD_ERROR = (41),
phungductung 0:8ede47d38d10 262 SD_OK = (0)
phungductung 0:8ede47d38d10 263
phungductung 0:8ede47d38d10 264 }HAL_SD_ErrorTypedef;
phungductung 0:8ede47d38d10 265 /**
phungductung 0:8ede47d38d10 266 * @}
phungductung 0:8ede47d38d10 267 */
phungductung 0:8ede47d38d10 268
phungductung 0:8ede47d38d10 269 /** @defgroup SD_Exported_Types_Group7 SD Transfer state enumeration structure
phungductung 0:8ede47d38d10 270 * @{
phungductung 0:8ede47d38d10 271 */
phungductung 0:8ede47d38d10 272 typedef enum
phungductung 0:8ede47d38d10 273 {
phungductung 0:8ede47d38d10 274 SD_TRANSFER_OK = 0, /*!< Transfer success */
phungductung 0:8ede47d38d10 275 SD_TRANSFER_BUSY = 1, /*!< Transfer is occurring */
phungductung 0:8ede47d38d10 276 SD_TRANSFER_ERROR = 2 /*!< Transfer failed */
phungductung 0:8ede47d38d10 277
phungductung 0:8ede47d38d10 278 }HAL_SD_TransferStateTypedef;
phungductung 0:8ede47d38d10 279 /**
phungductung 0:8ede47d38d10 280 * @}
phungductung 0:8ede47d38d10 281 */
phungductung 0:8ede47d38d10 282
phungductung 0:8ede47d38d10 283 /** @defgroup SD_Exported_Types_Group8 SD Card State enumeration structure
phungductung 0:8ede47d38d10 284 * @{
phungductung 0:8ede47d38d10 285 */
phungductung 0:8ede47d38d10 286 typedef enum
phungductung 0:8ede47d38d10 287 {
phungductung 0:8ede47d38d10 288 SD_CARD_READY = ((uint32_t)0x00000001), /*!< Card state is ready */
phungductung 0:8ede47d38d10 289 SD_CARD_IDENTIFICATION = ((uint32_t)0x00000002), /*!< Card is in identification state */
phungductung 0:8ede47d38d10 290 SD_CARD_STANDBY = ((uint32_t)0x00000003), /*!< Card is in standby state */
phungductung 0:8ede47d38d10 291 SD_CARD_TRANSFER = ((uint32_t)0x00000004), /*!< Card is in transfer state */
phungductung 0:8ede47d38d10 292 SD_CARD_SENDING = ((uint32_t)0x00000005), /*!< Card is sending an operation */
phungductung 0:8ede47d38d10 293 SD_CARD_RECEIVING = ((uint32_t)0x00000006), /*!< Card is receiving operation information */
phungductung 0:8ede47d38d10 294 SD_CARD_PROGRAMMING = ((uint32_t)0x00000007), /*!< Card is in programming state */
phungductung 0:8ede47d38d10 295 SD_CARD_DISCONNECTED = ((uint32_t)0x00000008), /*!< Card is disconnected */
phungductung 0:8ede47d38d10 296 SD_CARD_ERROR = ((uint32_t)0x000000FF) /*!< Card is in error state */
phungductung 0:8ede47d38d10 297
phungductung 0:8ede47d38d10 298 }HAL_SD_CardStateTypedef;
phungductung 0:8ede47d38d10 299 /**
phungductung 0:8ede47d38d10 300 * @}
phungductung 0:8ede47d38d10 301 */
phungductung 0:8ede47d38d10 302
phungductung 0:8ede47d38d10 303 /** @defgroup SD_Exported_Types_Group9 SD Operation enumeration structure
phungductung 0:8ede47d38d10 304 * @{
phungductung 0:8ede47d38d10 305 */
phungductung 0:8ede47d38d10 306 typedef enum
phungductung 0:8ede47d38d10 307 {
phungductung 0:8ede47d38d10 308 SD_READ_SINGLE_BLOCK = 0, /*!< Read single block operation */
phungductung 0:8ede47d38d10 309 SD_READ_MULTIPLE_BLOCK = 1, /*!< Read multiple blocks operation */
phungductung 0:8ede47d38d10 310 SD_WRITE_SINGLE_BLOCK = 2, /*!< Write single block operation */
phungductung 0:8ede47d38d10 311 SD_WRITE_MULTIPLE_BLOCK = 3 /*!< Write multiple blocks operation */
phungductung 0:8ede47d38d10 312
phungductung 0:8ede47d38d10 313 }HAL_SD_OperationTypedef;
phungductung 0:8ede47d38d10 314 /**
phungductung 0:8ede47d38d10 315 * @}
phungductung 0:8ede47d38d10 316 */
phungductung 0:8ede47d38d10 317
phungductung 0:8ede47d38d10 318 /**
phungductung 0:8ede47d38d10 319 * @}
phungductung 0:8ede47d38d10 320 */
phungductung 0:8ede47d38d10 321
phungductung 0:8ede47d38d10 322 /* Exported constants --------------------------------------------------------*/
phungductung 0:8ede47d38d10 323 /** @defgroup SD_Exported_Constants SD Exported Constants
phungductung 0:8ede47d38d10 324 * @{
phungductung 0:8ede47d38d10 325 */
phungductung 0:8ede47d38d10 326
phungductung 0:8ede47d38d10 327 /**
phungductung 0:8ede47d38d10 328 * @brief SD Commands Index
phungductung 0:8ede47d38d10 329 */
phungductung 0:8ede47d38d10 330 #define SD_CMD_GO_IDLE_STATE ((uint8_t)0) /*!< Resets the SD memory card. */
phungductung 0:8ede47d38d10 331 #define SD_CMD_SEND_OP_COND ((uint8_t)1) /*!< Sends host capacity support information and activates the card's initialization process. */
phungductung 0:8ede47d38d10 332 #define SD_CMD_ALL_SEND_CID ((uint8_t)2) /*!< Asks any card connected to the host to send the CID numbers on the CMD line. */
phungductung 0:8ede47d38d10 333 #define SD_CMD_SET_REL_ADDR ((uint8_t)3) /*!< Asks the card to publish a new relative address (RCA). */
phungductung 0:8ede47d38d10 334 #define SD_CMD_SET_DSR ((uint8_t)4) /*!< Programs the DSR of all cards. */
phungductung 0:8ede47d38d10 335 #define SD_CMD_SDMMC_SEN_OP_COND ((uint8_t)5) /*!< Sends host capacity support information (HCS) and asks the accessed card to send its
phungductung 0:8ede47d38d10 336 operating condition register (OCR) content in the response on the CMD line. */
phungductung 0:8ede47d38d10 337 #define SD_CMD_HS_SWITCH ((uint8_t)6) /*!< Checks switchable function (mode 0) and switch card function (mode 1). */
phungductung 0:8ede47d38d10 338 #define SD_CMD_SEL_DESEL_CARD ((uint8_t)7) /*!< Selects the card by its own relative address and gets deselected by any other address */
phungductung 0:8ede47d38d10 339 #define SD_CMD_HS_SEND_EXT_CSD ((uint8_t)8) /*!< Sends SD Memory Card interface condition, which includes host supply voltage information
phungductung 0:8ede47d38d10 340 and asks the card whether card supports voltage. */
phungductung 0:8ede47d38d10 341 #define SD_CMD_SEND_CSD ((uint8_t)9) /*!< Addressed card sends its card specific data (CSD) on the CMD line. */
phungductung 0:8ede47d38d10 342 #define SD_CMD_SEND_CID ((uint8_t)10) /*!< Addressed card sends its card identification (CID) on the CMD line. */
phungductung 0:8ede47d38d10 343 #define SD_CMD_READ_DAT_UNTIL_STOP ((uint8_t)11) /*!< SD card doesn't support it. */
phungductung 0:8ede47d38d10 344 #define SD_CMD_STOP_TRANSMISSION ((uint8_t)12) /*!< Forces the card to stop transmission. */
phungductung 0:8ede47d38d10 345 #define SD_CMD_SEND_STATUS ((uint8_t)13) /*!< Addressed card sends its status register. */
phungductung 0:8ede47d38d10 346 #define SD_CMD_HS_BUSTEST_READ ((uint8_t)14)
phungductung 0:8ede47d38d10 347 #define SD_CMD_GO_INACTIVE_STATE ((uint8_t)15) /*!< Sends an addressed card into the inactive state. */
phungductung 0:8ede47d38d10 348 #define SD_CMD_SET_BLOCKLEN ((uint8_t)16) /*!< Sets the block length (in bytes for SDSC) for all following block commands
phungductung 0:8ede47d38d10 349 (read, write, lock). Default block length is fixed to 512 Bytes. Not effective
phungductung 0:8ede47d38d10 350 for SDHS and SDXC. */
phungductung 0:8ede47d38d10 351 #define SD_CMD_READ_SINGLE_BLOCK ((uint8_t)17) /*!< Reads single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of
phungductung 0:8ede47d38d10 352 fixed 512 bytes in case of SDHC and SDXC. */
phungductung 0:8ede47d38d10 353 #define SD_CMD_READ_MULT_BLOCK ((uint8_t)18) /*!< Continuously transfers data blocks from card to host until interrupted by
phungductung 0:8ede47d38d10 354 STOP_TRANSMISSION command. */
phungductung 0:8ede47d38d10 355 #define SD_CMD_HS_BUSTEST_WRITE ((uint8_t)19) /*!< 64 bytes tuning pattern is sent for SDR50 and SDR104. */
phungductung 0:8ede47d38d10 356 #define SD_CMD_WRITE_DAT_UNTIL_STOP ((uint8_t)20) /*!< Speed class control command. */
phungductung 0:8ede47d38d10 357 #define SD_CMD_SET_BLOCK_COUNT ((uint8_t)23) /*!< Specify block count for CMD18 and CMD25. */
phungductung 0:8ede47d38d10 358 #define SD_CMD_WRITE_SINGLE_BLOCK ((uint8_t)24) /*!< Writes single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of
phungductung 0:8ede47d38d10 359 fixed 512 bytes in case of SDHC and SDXC. */
phungductung 0:8ede47d38d10 360 #define SD_CMD_WRITE_MULT_BLOCK ((uint8_t)25) /*!< Continuously writes blocks of data until a STOP_TRANSMISSION follows. */
phungductung 0:8ede47d38d10 361 #define SD_CMD_PROG_CID ((uint8_t)26) /*!< Reserved for manufacturers. */
phungductung 0:8ede47d38d10 362 #define SD_CMD_PROG_CSD ((uint8_t)27) /*!< Programming of the programmable bits of the CSD. */
phungductung 0:8ede47d38d10 363 #define SD_CMD_SET_WRITE_PROT ((uint8_t)28) /*!< Sets the write protection bit of the addressed group. */
phungductung 0:8ede47d38d10 364 #define SD_CMD_CLR_WRITE_PROT ((uint8_t)29) /*!< Clears the write protection bit of the addressed group. */
phungductung 0:8ede47d38d10 365 #define SD_CMD_SEND_WRITE_PROT ((uint8_t)30) /*!< Asks the card to send the status of the write protection bits. */
phungductung 0:8ede47d38d10 366 #define SD_CMD_SD_ERASE_GRP_START ((uint8_t)32) /*!< Sets the address of the first write block to be erased. (For SD card only). */
phungductung 0:8ede47d38d10 367 #define SD_CMD_SD_ERASE_GRP_END ((uint8_t)33) /*!< Sets the address of the last write block of the continuous range to be erased. */
phungductung 0:8ede47d38d10 368 #define SD_CMD_ERASE_GRP_START ((uint8_t)35) /*!< Sets the address of the first write block to be erased. Reserved for each command
phungductung 0:8ede47d38d10 369 system set by switch function command (CMD6). */
phungductung 0:8ede47d38d10 370 #define SD_CMD_ERASE_GRP_END ((uint8_t)36) /*!< Sets the address of the last write block of the continuous range to be erased.
phungductung 0:8ede47d38d10 371 Reserved for each command system set by switch function command (CMD6). */
phungductung 0:8ede47d38d10 372 #define SD_CMD_ERASE ((uint8_t)38) /*!< Reserved for SD security applications. */
phungductung 0:8ede47d38d10 373 #define SD_CMD_FAST_IO ((uint8_t)39) /*!< SD card doesn't support it (Reserved). */
phungductung 0:8ede47d38d10 374 #define SD_CMD_GO_IRQ_STATE ((uint8_t)40) /*!< SD card doesn't support it (Reserved). */
phungductung 0:8ede47d38d10 375 #define SD_CMD_LOCK_UNLOCK ((uint8_t)42) /*!< Sets/resets the password or lock/unlock the card. The size of the data block is set by
phungductung 0:8ede47d38d10 376 the SET_BLOCK_LEN command. */
phungductung 0:8ede47d38d10 377 #define SD_CMD_APP_CMD ((uint8_t)55) /*!< Indicates to the card that the next command is an application specific command rather
phungductung 0:8ede47d38d10 378 than a standard command. */
phungductung 0:8ede47d38d10 379 #define SD_CMD_GEN_CMD ((uint8_t)56) /*!< Used either to transfer a data block to the card or to get a data block from the card
phungductung 0:8ede47d38d10 380 for general purpose/application specific commands. */
phungductung 0:8ede47d38d10 381 #define SD_CMD_NO_CMD ((uint8_t)64)
phungductung 0:8ede47d38d10 382
phungductung 0:8ede47d38d10 383 /**
phungductung 0:8ede47d38d10 384 * @brief Following commands are SD Card Specific commands.
phungductung 0:8ede47d38d10 385 * SDMMC_APP_CMD should be sent before sending these commands.
phungductung 0:8ede47d38d10 386 */
phungductung 0:8ede47d38d10 387 #define SD_CMD_APP_SD_SET_BUSWIDTH ((uint8_t)6) /*!< (ACMD6) Defines the data bus width to be used for data transfer. The allowed data bus
phungductung 0:8ede47d38d10 388 widths are given in SCR register. */
phungductung 0:8ede47d38d10 389 #define SD_CMD_SD_APP_STATUS ((uint8_t)13) /*!< (ACMD13) Sends the SD status. */
phungductung 0:8ede47d38d10 390 #define SD_CMD_SD_APP_SEND_NUM_WRITE_BLOCKS ((uint8_t)22) /*!< (ACMD22) Sends the number of the written (without errors) write blocks. Responds with
phungductung 0:8ede47d38d10 391 32bit+CRC data block. */
phungductung 0:8ede47d38d10 392 #define SD_CMD_SD_APP_OP_COND ((uint8_t)41) /*!< (ACMD41) Sends host capacity support information (HCS) and asks the accessed card to
phungductung 0:8ede47d38d10 393 send its operating condition register (OCR) content in the response on the CMD line. */
phungductung 0:8ede47d38d10 394 #define SD_CMD_SD_APP_SET_CLR_CARD_DETECT ((uint8_t)42) /*!< (ACMD42) Connects/Disconnects the 50 KOhm pull-up resistor on CD/DAT3 (pin 1) of the card. */
phungductung 0:8ede47d38d10 395 #define SD_CMD_SD_APP_SEND_SCR ((uint8_t)51) /*!< Reads the SD Configuration Register (SCR). */
phungductung 0:8ede47d38d10 396 #define SD_CMD_SDMMC_RW_DIRECT ((uint8_t)52) /*!< For SD I/O card only, reserved for security specification. */
phungductung 0:8ede47d38d10 397 #define SD_CMD_SDMMC_RW_EXTENDED ((uint8_t)53) /*!< For SD I/O card only, reserved for security specification. */
phungductung 0:8ede47d38d10 398
phungductung 0:8ede47d38d10 399 /**
phungductung 0:8ede47d38d10 400 * @brief Following commands are SD Card Specific security commands.
phungductung 0:8ede47d38d10 401 * SD_CMD_APP_CMD should be sent before sending these commands.
phungductung 0:8ede47d38d10 402 */
phungductung 0:8ede47d38d10 403 #define SD_CMD_SD_APP_GET_MKB ((uint8_t)43) /*!< For SD card only */
phungductung 0:8ede47d38d10 404 #define SD_CMD_SD_APP_GET_MID ((uint8_t)44) /*!< For SD card only */
phungductung 0:8ede47d38d10 405 #define SD_CMD_SD_APP_SET_CER_RN1 ((uint8_t)45) /*!< For SD card only */
phungductung 0:8ede47d38d10 406 #define SD_CMD_SD_APP_GET_CER_RN2 ((uint8_t)46) /*!< For SD card only */
phungductung 0:8ede47d38d10 407 #define SD_CMD_SD_APP_SET_CER_RES2 ((uint8_t)47) /*!< For SD card only */
phungductung 0:8ede47d38d10 408 #define SD_CMD_SD_APP_GET_CER_RES1 ((uint8_t)48) /*!< For SD card only */
phungductung 0:8ede47d38d10 409 #define SD_CMD_SD_APP_SECURE_READ_MULTIPLE_BLOCK ((uint8_t)18) /*!< For SD card only */
phungductung 0:8ede47d38d10 410 #define SD_CMD_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK ((uint8_t)25) /*!< For SD card only */
phungductung 0:8ede47d38d10 411 #define SD_CMD_SD_APP_SECURE_ERASE ((uint8_t)38) /*!< For SD card only */
phungductung 0:8ede47d38d10 412 #define SD_CMD_SD_APP_CHANGE_SECURE_AREA ((uint8_t)49) /*!< For SD card only */
phungductung 0:8ede47d38d10 413 #define SD_CMD_SD_APP_SECURE_WRITE_MKB ((uint8_t)48) /*!< For SD card only */
phungductung 0:8ede47d38d10 414
phungductung 0:8ede47d38d10 415 /**
phungductung 0:8ede47d38d10 416 * @brief Supported SD Memory Cards
phungductung 0:8ede47d38d10 417 */
phungductung 0:8ede47d38d10 418 #define STD_CAPACITY_SD_CARD_V1_1 ((uint32_t)0x00000000)
phungductung 0:8ede47d38d10 419 #define STD_CAPACITY_SD_CARD_V2_0 ((uint32_t)0x00000001)
phungductung 0:8ede47d38d10 420 #define HIGH_CAPACITY_SD_CARD ((uint32_t)0x00000002)
phungductung 0:8ede47d38d10 421 #define MULTIMEDIA_CARD ((uint32_t)0x00000003)
phungductung 0:8ede47d38d10 422 #define SECURE_DIGITAL_IO_CARD ((uint32_t)0x00000004)
phungductung 0:8ede47d38d10 423 #define HIGH_SPEED_MULTIMEDIA_CARD ((uint32_t)0x00000005)
phungductung 0:8ede47d38d10 424 #define SECURE_DIGITAL_IO_COMBO_CARD ((uint32_t)0x00000006)
phungductung 0:8ede47d38d10 425 #define HIGH_CAPACITY_MMC_CARD ((uint32_t)0x00000007)
phungductung 0:8ede47d38d10 426 /**
phungductung 0:8ede47d38d10 427 * @}
phungductung 0:8ede47d38d10 428 */
phungductung 0:8ede47d38d10 429
phungductung 0:8ede47d38d10 430 /* Exported macro ------------------------------------------------------------*/
phungductung 0:8ede47d38d10 431 /** @defgroup SD_Exported_macros SD Exported Macros
phungductung 0:8ede47d38d10 432 * @brief macros to handle interrupts and specific clock configurations
phungductung 0:8ede47d38d10 433 * @{
phungductung 0:8ede47d38d10 434 */
phungductung 0:8ede47d38d10 435
phungductung 0:8ede47d38d10 436 /**
phungductung 0:8ede47d38d10 437 * @brief Enable the SD device.
phungductung 0:8ede47d38d10 438 * @retval None
phungductung 0:8ede47d38d10 439 */
phungductung 0:8ede47d38d10 440 #define __HAL_SD_SDMMC_ENABLE(__HANDLE__) __SDMMC_ENABLE((__HANDLE__)->Instance)
phungductung 0:8ede47d38d10 441
phungductung 0:8ede47d38d10 442 /**
phungductung 0:8ede47d38d10 443 * @brief Disable the SD device.
phungductung 0:8ede47d38d10 444 * @retval None
phungductung 0:8ede47d38d10 445 */
phungductung 0:8ede47d38d10 446 #define __HAL_SD_SDMMC_DISABLE(__HANDLE__) __SDMMC_DISABLE((__HANDLE__)->Instance)
phungductung 0:8ede47d38d10 447
phungductung 0:8ede47d38d10 448 /**
phungductung 0:8ede47d38d10 449 * @brief Enable the SDMMC DMA transfer.
phungductung 0:8ede47d38d10 450 * @retval None
phungductung 0:8ede47d38d10 451 */
phungductung 0:8ede47d38d10 452 #define __HAL_SD_SDMMC_DMA_ENABLE(__HANDLE__) __SDMMC_DMA_ENABLE((__HANDLE__)->Instance)
phungductung 0:8ede47d38d10 453
phungductung 0:8ede47d38d10 454 /**
phungductung 0:8ede47d38d10 455 * @brief Disable the SDMMC DMA transfer.
phungductung 0:8ede47d38d10 456 * @retval None
phungductung 0:8ede47d38d10 457 */
phungductung 0:8ede47d38d10 458 #define __HAL_SD_SDMMC_DMA_DISABLE(__HANDLE__) __SDMMC_DMA_DISABLE((__HANDLE__)->Instance)
phungductung 0:8ede47d38d10 459
phungductung 0:8ede47d38d10 460 /**
phungductung 0:8ede47d38d10 461 * @brief Enable the SD device interrupt.
phungductung 0:8ede47d38d10 462 * @param __HANDLE__: SD Handle
phungductung 0:8ede47d38d10 463 * @param __INTERRUPT__: specifies the SDMMC interrupt sources to be enabled.
phungductung 0:8ede47d38d10 464 * This parameter can be one or a combination of the following values:
phungductung 0:8ede47d38d10 465 * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
phungductung 0:8ede47d38d10 466 * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
phungductung 0:8ede47d38d10 467 * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt
phungductung 0:8ede47d38d10 468 * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt
phungductung 0:8ede47d38d10 469 * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt
phungductung 0:8ede47d38d10 470 * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt
phungductung 0:8ede47d38d10 471 * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt
phungductung 0:8ede47d38d10 472 * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt
phungductung 0:8ede47d38d10 473 * @arg SDMMC_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
phungductung 0:8ede47d38d10 474 * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
phungductung 0:8ede47d38d10 475 * @arg SDMMC_IT_CMDACT: Command transfer in progress interrupt
phungductung 0:8ede47d38d10 476 * @arg SDMMC_IT_TXACT: Data transmit in progress interrupt
phungductung 0:8ede47d38d10 477 * @arg SDMMC_IT_RXACT: Data receive in progress interrupt
phungductung 0:8ede47d38d10 478 * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
phungductung 0:8ede47d38d10 479 * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt
phungductung 0:8ede47d38d10 480 * @arg SDMMC_IT_TXFIFOF: Transmit FIFO full interrupt
phungductung 0:8ede47d38d10 481 * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt
phungductung 0:8ede47d38d10 482 * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt
phungductung 0:8ede47d38d10 483 * @arg SDMMC_IT_RXFIFOE: Receive FIFO empty interrupt
phungductung 0:8ede47d38d10 484 * @arg SDMMC_IT_TXDAVL: Data available in transmit FIFO interrupt
phungductung 0:8ede47d38d10 485 * @arg SDMMC_IT_RXDAVL: Data available in receive FIFO interrupt
phungductung 0:8ede47d38d10 486 * @arg SDMMC_IT_SDIOIT: SD I/O interrupt received interrupt
phungductung 0:8ede47d38d10 487 * @retval None
phungductung 0:8ede47d38d10 488 */
phungductung 0:8ede47d38d10 489 #define __HAL_SD_SDMMC_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
phungductung 0:8ede47d38d10 490
phungductung 0:8ede47d38d10 491 /**
phungductung 0:8ede47d38d10 492 * @brief Disable the SD device interrupt.
phungductung 0:8ede47d38d10 493 * @param __HANDLE__: SD Handle
phungductung 0:8ede47d38d10 494 * @param __INTERRUPT__: specifies the SDMMC interrupt sources to be disabled.
phungductung 0:8ede47d38d10 495 * This parameter can be one or a combination of the following values:
phungductung 0:8ede47d38d10 496 * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
phungductung 0:8ede47d38d10 497 * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
phungductung 0:8ede47d38d10 498 * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt
phungductung 0:8ede47d38d10 499 * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt
phungductung 0:8ede47d38d10 500 * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt
phungductung 0:8ede47d38d10 501 * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt
phungductung 0:8ede47d38d10 502 * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt
phungductung 0:8ede47d38d10 503 * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt
phungductung 0:8ede47d38d10 504 * @arg SDMMC_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
phungductung 0:8ede47d38d10 505 * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
phungductung 0:8ede47d38d10 506 * @arg SDMMC_IT_CMDACT: Command transfer in progress interrupt
phungductung 0:8ede47d38d10 507 * @arg SDMMC_IT_TXACT: Data transmit in progress interrupt
phungductung 0:8ede47d38d10 508 * @arg SDMMC_IT_RXACT: Data receive in progress interrupt
phungductung 0:8ede47d38d10 509 * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
phungductung 0:8ede47d38d10 510 * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt
phungductung 0:8ede47d38d10 511 * @arg SDMMC_IT_TXFIFOF: Transmit FIFO full interrupt
phungductung 0:8ede47d38d10 512 * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt
phungductung 0:8ede47d38d10 513 * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt
phungductung 0:8ede47d38d10 514 * @arg SDMMC_IT_RXFIFOE: Receive FIFO empty interrupt
phungductung 0:8ede47d38d10 515 * @arg SDMMC_IT_TXDAVL: Data available in transmit FIFO interrupt
phungductung 0:8ede47d38d10 516 * @arg SDMMC_IT_RXDAVL: Data available in receive FIFO interrupt
phungductung 0:8ede47d38d10 517 * @arg SDMMC_IT_SDIOIT: SD I/O interrupt received interrupt
phungductung 0:8ede47d38d10 518 * @retval None
phungductung 0:8ede47d38d10 519 */
phungductung 0:8ede47d38d10 520 #define __HAL_SD_SDMMC_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
phungductung 0:8ede47d38d10 521
phungductung 0:8ede47d38d10 522 /**
phungductung 0:8ede47d38d10 523 * @brief Check whether the specified SD flag is set or not.
phungductung 0:8ede47d38d10 524 * @param __HANDLE__: SD Handle
phungductung 0:8ede47d38d10 525 * @param __FLAG__: specifies the flag to check.
phungductung 0:8ede47d38d10 526 * This parameter can be one of the following values:
phungductung 0:8ede47d38d10 527 * @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed)
phungductung 0:8ede47d38d10 528 * @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
phungductung 0:8ede47d38d10 529 * @arg SDMMC_FLAG_CTIMEOUT: Command response timeout
phungductung 0:8ede47d38d10 530 * @arg SDMMC_FLAG_DTIMEOUT: Data timeout
phungductung 0:8ede47d38d10 531 * @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error
phungductung 0:8ede47d38d10 532 * @arg SDMMC_FLAG_RXOVERR: Received FIFO overrun error
phungductung 0:8ede47d38d10 533 * @arg SDMMC_FLAG_CMDREND: Command response received (CRC check passed)
phungductung 0:8ede47d38d10 534 * @arg SDMMC_FLAG_CMDSENT: Command sent (no response required)
phungductung 0:8ede47d38d10 535 * @arg SDMMC_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
phungductung 0:8ede47d38d10 536 * @arg SDMMC_FLAG_DBCKEND: Data block sent/received (CRC check passed)
phungductung 0:8ede47d38d10 537 * @arg SDMMC_FLAG_CMDACT: Command transfer in progress
phungductung 0:8ede47d38d10 538 * @arg SDMMC_FLAG_TXACT: Data transmit in progress
phungductung 0:8ede47d38d10 539 * @arg SDMMC_FLAG_RXACT: Data receive in progress
phungductung 0:8ede47d38d10 540 * @arg SDMMC_FLAG_TXFIFOHE: Transmit FIFO Half Empty
phungductung 0:8ede47d38d10 541 * @arg SDMMC_FLAG_RXFIFOHF: Receive FIFO Half Full
phungductung 0:8ede47d38d10 542 * @arg SDMMC_FLAG_TXFIFOF: Transmit FIFO full
phungductung 0:8ede47d38d10 543 * @arg SDMMC_FLAG_RXFIFOF: Receive FIFO full
phungductung 0:8ede47d38d10 544 * @arg SDMMC_FLAG_TXFIFOE: Transmit FIFO empty
phungductung 0:8ede47d38d10 545 * @arg SDMMC_FLAG_RXFIFOE: Receive FIFO empty
phungductung 0:8ede47d38d10 546 * @arg SDMMC_FLAG_TXDAVL: Data available in transmit FIFO
phungductung 0:8ede47d38d10 547 * @arg SDMMC_FLAG_RXDAVL: Data available in receive FIFO
phungductung 0:8ede47d38d10 548 * @arg SDMMC_FLAG_SDIOIT: SD I/O interrupt received
phungductung 0:8ede47d38d10 549 * @retval The new state of SD FLAG (SET or RESET).
phungductung 0:8ede47d38d10 550 */
phungductung 0:8ede47d38d10 551 #define __HAL_SD_SDMMC_GET_FLAG(__HANDLE__, __FLAG__) __SDMMC_GET_FLAG((__HANDLE__)->Instance, (__FLAG__))
phungductung 0:8ede47d38d10 552
phungductung 0:8ede47d38d10 553 /**
phungductung 0:8ede47d38d10 554 * @brief Clear the SD's pending flags.
phungductung 0:8ede47d38d10 555 * @param __HANDLE__: SD Handle
phungductung 0:8ede47d38d10 556 * @param __FLAG__: specifies the flag to clear.
phungductung 0:8ede47d38d10 557 * This parameter can be one or a combination of the following values:
phungductung 0:8ede47d38d10 558 * @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed)
phungductung 0:8ede47d38d10 559 * @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
phungductung 0:8ede47d38d10 560 * @arg SDMMC_FLAG_CTIMEOUT: Command response timeout
phungductung 0:8ede47d38d10 561 * @arg SDMMC_FLAG_DTIMEOUT: Data timeout
phungductung 0:8ede47d38d10 562 * @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error
phungductung 0:8ede47d38d10 563 * @arg SDMMC_FLAG_RXOVERR: Received FIFO overrun error
phungductung 0:8ede47d38d10 564 * @arg SDMMC_FLAG_CMDREND: Command response received (CRC check passed)
phungductung 0:8ede47d38d10 565 * @arg SDMMC_FLAG_CMDSENT: Command sent (no response required)
phungductung 0:8ede47d38d10 566 * @arg SDMMC_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
phungductung 0:8ede47d38d10 567 * @arg SDMMC_FLAG_DBCKEND: Data block sent/received (CRC check passed)
phungductung 0:8ede47d38d10 568 * @arg SDMMC_FLAG_SDIOIT: SD I/O interrupt received
phungductung 0:8ede47d38d10 569 * @retval None
phungductung 0:8ede47d38d10 570 */
phungductung 0:8ede47d38d10 571 #define __HAL_SD_SDMMC_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDMMC_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__))
phungductung 0:8ede47d38d10 572
phungductung 0:8ede47d38d10 573 /**
phungductung 0:8ede47d38d10 574 * @brief Check whether the specified SD interrupt has occurred or not.
phungductung 0:8ede47d38d10 575 * @param __HANDLE__: SD Handle
phungductung 0:8ede47d38d10 576 * @param __INTERRUPT__: specifies the SDMMC interrupt source to check.
phungductung 0:8ede47d38d10 577 * This parameter can be one of the following values:
phungductung 0:8ede47d38d10 578 * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
phungductung 0:8ede47d38d10 579 * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
phungductung 0:8ede47d38d10 580 * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt
phungductung 0:8ede47d38d10 581 * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt
phungductung 0:8ede47d38d10 582 * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt
phungductung 0:8ede47d38d10 583 * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt
phungductung 0:8ede47d38d10 584 * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt
phungductung 0:8ede47d38d10 585 * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt
phungductung 0:8ede47d38d10 586 * @arg SDMMC_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
phungductung 0:8ede47d38d10 587 * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
phungductung 0:8ede47d38d10 588 * @arg SDMMC_IT_CMDACT: Command transfer in progress interrupt
phungductung 0:8ede47d38d10 589 * @arg SDMMC_IT_TXACT: Data transmit in progress interrupt
phungductung 0:8ede47d38d10 590 * @arg SDMMC_IT_RXACT: Data receive in progress interrupt
phungductung 0:8ede47d38d10 591 * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
phungductung 0:8ede47d38d10 592 * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt
phungductung 0:8ede47d38d10 593 * @arg SDMMC_IT_TXFIFOF: Transmit FIFO full interrupt
phungductung 0:8ede47d38d10 594 * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt
phungductung 0:8ede47d38d10 595 * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt
phungductung 0:8ede47d38d10 596 * @arg SDMMC_IT_RXFIFOE: Receive FIFO empty interrupt
phungductung 0:8ede47d38d10 597 * @arg SDMMC_IT_TXDAVL: Data available in transmit FIFO interrupt
phungductung 0:8ede47d38d10 598 * @arg SDMMC_IT_RXDAVL: Data available in receive FIFO interrupt
phungductung 0:8ede47d38d10 599 * @arg SDMMC_IT_SDIOIT: SD I/O interrupt received interrupt
phungductung 0:8ede47d38d10 600 * @retval The new state of SD IT (SET or RESET).
phungductung 0:8ede47d38d10 601 */
phungductung 0:8ede47d38d10 602 #define __HAL_SD_SDMMC_GET_IT(__HANDLE__, __INTERRUPT__) __SDMMC_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__))
phungductung 0:8ede47d38d10 603
phungductung 0:8ede47d38d10 604 /**
phungductung 0:8ede47d38d10 605 * @brief Clear the SD's interrupt pending bits.
phungductung 0:8ede47d38d10 606 * @param __HANDLE__: SD Handle
phungductung 0:8ede47d38d10 607 * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
phungductung 0:8ede47d38d10 608 * This parameter can be one or a combination of the following values:
phungductung 0:8ede47d38d10 609 * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
phungductung 0:8ede47d38d10 610 * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
phungductung 0:8ede47d38d10 611 * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt
phungductung 0:8ede47d38d10 612 * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt
phungductung 0:8ede47d38d10 613 * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt
phungductung 0:8ede47d38d10 614 * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt
phungductung 0:8ede47d38d10 615 * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt
phungductung 0:8ede47d38d10 616 * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt
phungductung 0:8ede47d38d10 617 * @arg SDMMC_IT_DATAEND: Data end (data counter, SDMMC_DCOUNT, is zero) interrupt
phungductung 0:8ede47d38d10 618 * @arg SDMMC_IT_SDIOIT: SD I/O interrupt received interrupt
phungductung 0:8ede47d38d10 619 * @retval None
phungductung 0:8ede47d38d10 620 */
phungductung 0:8ede47d38d10 621 #define __HAL_SD_SDMMC_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDMMC_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__))
phungductung 0:8ede47d38d10 622 /**
phungductung 0:8ede47d38d10 623 * @}
phungductung 0:8ede47d38d10 624 */
phungductung 0:8ede47d38d10 625
phungductung 0:8ede47d38d10 626 /* Exported functions --------------------------------------------------------*/
phungductung 0:8ede47d38d10 627 /** @defgroup SD_Exported_Functions SD Exported Functions
phungductung 0:8ede47d38d10 628 * @{
phungductung 0:8ede47d38d10 629 */
phungductung 0:8ede47d38d10 630
phungductung 0:8ede47d38d10 631 /** @defgroup SD_Exported_Functions_Group1 Initialization and de-initialization functions
phungductung 0:8ede47d38d10 632 * @{
phungductung 0:8ede47d38d10 633 */
phungductung 0:8ede47d38d10 634 HAL_SD_ErrorTypedef HAL_SD_Init(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *SDCardInfo);
phungductung 0:8ede47d38d10 635 HAL_StatusTypeDef HAL_SD_DeInit (SD_HandleTypeDef *hsd);
phungductung 0:8ede47d38d10 636 void HAL_SD_MspInit(SD_HandleTypeDef *hsd);
phungductung 0:8ede47d38d10 637 void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd);
phungductung 0:8ede47d38d10 638 /**
phungductung 0:8ede47d38d10 639 * @}
phungductung 0:8ede47d38d10 640 */
phungductung 0:8ede47d38d10 641
phungductung 0:8ede47d38d10 642 /** @defgroup SD_Exported_Functions_Group2 Input and Output operation functions
phungductung 0:8ede47d38d10 643 * @{
phungductung 0:8ede47d38d10 644 */
phungductung 0:8ede47d38d10 645 /* Blocking mode: Polling */
phungductung 0:8ede47d38d10 646 HAL_SD_ErrorTypedef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
phungductung 0:8ede47d38d10 647 HAL_SD_ErrorTypedef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
phungductung 0:8ede47d38d10 648 HAL_SD_ErrorTypedef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint64_t startaddr, uint64_t endaddr);
phungductung 0:8ede47d38d10 649
phungductung 0:8ede47d38d10 650 /* Non-Blocking mode: Interrupt */
phungductung 0:8ede47d38d10 651 void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd);
phungductung 0:8ede47d38d10 652
phungductung 0:8ede47d38d10 653 /* Callback in non blocking modes (DMA) */
phungductung 0:8ede47d38d10 654 void HAL_SD_DMA_RxCpltCallback(DMA_HandleTypeDef *hdma);
phungductung 0:8ede47d38d10 655 void HAL_SD_DMA_RxErrorCallback(DMA_HandleTypeDef *hdma);
phungductung 0:8ede47d38d10 656 void HAL_SD_DMA_TxCpltCallback(DMA_HandleTypeDef *hdma);
phungductung 0:8ede47d38d10 657 void HAL_SD_DMA_TxErrorCallback(DMA_HandleTypeDef *hdma);
phungductung 0:8ede47d38d10 658 void HAL_SD_XferCpltCallback(SD_HandleTypeDef *hsd);
phungductung 0:8ede47d38d10 659 void HAL_SD_XferErrorCallback(SD_HandleTypeDef *hsd);
phungductung 0:8ede47d38d10 660
phungductung 0:8ede47d38d10 661 /* Non-Blocking mode: DMA */
phungductung 0:8ede47d38d10 662 HAL_SD_ErrorTypedef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
phungductung 0:8ede47d38d10 663 HAL_SD_ErrorTypedef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
phungductung 0:8ede47d38d10 664 HAL_SD_ErrorTypedef HAL_SD_CheckWriteOperation(SD_HandleTypeDef *hsd, uint32_t Timeout);
phungductung 0:8ede47d38d10 665 HAL_SD_ErrorTypedef HAL_SD_CheckReadOperation(SD_HandleTypeDef *hsd, uint32_t Timeout);
phungductung 0:8ede47d38d10 666 /**
phungductung 0:8ede47d38d10 667 * @}
phungductung 0:8ede47d38d10 668 */
phungductung 0:8ede47d38d10 669
phungductung 0:8ede47d38d10 670 /** @defgroup SD_Exported_Functions_Group3 Peripheral Control functions
phungductung 0:8ede47d38d10 671 * @{
phungductung 0:8ede47d38d10 672 */
phungductung 0:8ede47d38d10 673 HAL_SD_ErrorTypedef HAL_SD_Get_CardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *pCardInfo);
phungductung 0:8ede47d38d10 674 HAL_SD_ErrorTypedef HAL_SD_WideBusOperation_Config(SD_HandleTypeDef *hsd, uint32_t WideMode);
phungductung 0:8ede47d38d10 675 HAL_SD_ErrorTypedef HAL_SD_StopTransfer(SD_HandleTypeDef *hsd);
phungductung 0:8ede47d38d10 676 HAL_SD_ErrorTypedef HAL_SD_HighSpeed (SD_HandleTypeDef *hsd);
phungductung 0:8ede47d38d10 677 /**
phungductung 0:8ede47d38d10 678 * @}
phungductung 0:8ede47d38d10 679 */
phungductung 0:8ede47d38d10 680
phungductung 0:8ede47d38d10 681 /* Peripheral State functions ************************************************/
phungductung 0:8ede47d38d10 682 /** @defgroup SD_Exported_Functions_Group4 Peripheral State functions
phungductung 0:8ede47d38d10 683 * @{
phungductung 0:8ede47d38d10 684 */
phungductung 0:8ede47d38d10 685 HAL_SD_ErrorTypedef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus);
phungductung 0:8ede47d38d10 686 HAL_SD_ErrorTypedef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypedef *pCardStatus);
phungductung 0:8ede47d38d10 687 HAL_SD_TransferStateTypedef HAL_SD_GetStatus(SD_HandleTypeDef *hsd);
phungductung 0:8ede47d38d10 688 /**
phungductung 0:8ede47d38d10 689 * @}
phungductung 0:8ede47d38d10 690 */
phungductung 0:8ede47d38d10 691
phungductung 0:8ede47d38d10 692 /**
phungductung 0:8ede47d38d10 693 * @}
phungductung 0:8ede47d38d10 694 */
phungductung 0:8ede47d38d10 695
phungductung 0:8ede47d38d10 696 /* Private types -------------------------------------------------------------*/
phungductung 0:8ede47d38d10 697 /** @defgroup SD_Private_Types SD Private Types
phungductung 0:8ede47d38d10 698 * @{
phungductung 0:8ede47d38d10 699 */
phungductung 0:8ede47d38d10 700
phungductung 0:8ede47d38d10 701 /**
phungductung 0:8ede47d38d10 702 * @}
phungductung 0:8ede47d38d10 703 */
phungductung 0:8ede47d38d10 704
phungductung 0:8ede47d38d10 705 /* Private defines -----------------------------------------------------------*/
phungductung 0:8ede47d38d10 706 /** @defgroup SD_Private_Defines SD Private Defines
phungductung 0:8ede47d38d10 707 * @{
phungductung 0:8ede47d38d10 708 */
phungductung 0:8ede47d38d10 709
phungductung 0:8ede47d38d10 710 /**
phungductung 0:8ede47d38d10 711 * @}
phungductung 0:8ede47d38d10 712 */
phungductung 0:8ede47d38d10 713
phungductung 0:8ede47d38d10 714 /* Private variables ---------------------------------------------------------*/
phungductung 0:8ede47d38d10 715 /** @defgroup SD_Private_Variables SD Private Variables
phungductung 0:8ede47d38d10 716 * @{
phungductung 0:8ede47d38d10 717 */
phungductung 0:8ede47d38d10 718
phungductung 0:8ede47d38d10 719 /**
phungductung 0:8ede47d38d10 720 * @}
phungductung 0:8ede47d38d10 721 */
phungductung 0:8ede47d38d10 722
phungductung 0:8ede47d38d10 723 /* Private constants ---------------------------------------------------------*/
phungductung 0:8ede47d38d10 724 /** @defgroup SD_Private_Constants SD Private Constants
phungductung 0:8ede47d38d10 725 * @{
phungductung 0:8ede47d38d10 726 */
phungductung 0:8ede47d38d10 727
phungductung 0:8ede47d38d10 728 /**
phungductung 0:8ede47d38d10 729 * @}
phungductung 0:8ede47d38d10 730 */
phungductung 0:8ede47d38d10 731
phungductung 0:8ede47d38d10 732 /* Private macros ------------------------------------------------------------*/
phungductung 0:8ede47d38d10 733 /** @defgroup SD_Private_Macros SD Private Macros
phungductung 0:8ede47d38d10 734 * @{
phungductung 0:8ede47d38d10 735 */
phungductung 0:8ede47d38d10 736
phungductung 0:8ede47d38d10 737 /**
phungductung 0:8ede47d38d10 738 * @}
phungductung 0:8ede47d38d10 739 */
phungductung 0:8ede47d38d10 740
phungductung 0:8ede47d38d10 741 /* Private functions prototypes ----------------------------------------------*/
phungductung 0:8ede47d38d10 742 /** @defgroup SD_Private_Functions_Prototypes SD Private Functions Prototypes
phungductung 0:8ede47d38d10 743 * @{
phungductung 0:8ede47d38d10 744 */
phungductung 0:8ede47d38d10 745
phungductung 0:8ede47d38d10 746 /**
phungductung 0:8ede47d38d10 747 * @}
phungductung 0:8ede47d38d10 748 */
phungductung 0:8ede47d38d10 749
phungductung 0:8ede47d38d10 750 /* Private functions ---------------------------------------------------------*/
phungductung 0:8ede47d38d10 751 /** @defgroup SD_Private_Functions SD Private Functions
phungductung 0:8ede47d38d10 752 * @{
phungductung 0:8ede47d38d10 753 */
phungductung 0:8ede47d38d10 754
phungductung 0:8ede47d38d10 755 /**
phungductung 0:8ede47d38d10 756 * @}
phungductung 0:8ede47d38d10 757 */
phungductung 0:8ede47d38d10 758
phungductung 0:8ede47d38d10 759 /**
phungductung 0:8ede47d38d10 760 * @}
phungductung 0:8ede47d38d10 761 */
phungductung 0:8ede47d38d10 762
phungductung 0:8ede47d38d10 763 /**
phungductung 0:8ede47d38d10 764 * @}
phungductung 0:8ede47d38d10 765 */
phungductung 0:8ede47d38d10 766
phungductung 0:8ede47d38d10 767 #ifdef __cplusplus
phungductung 0:8ede47d38d10 768 }
phungductung 0:8ede47d38d10 769 #endif
phungductung 0:8ede47d38d10 770
phungductung 0:8ede47d38d10 771
phungductung 0:8ede47d38d10 772 #endif /* __STM32F7xx_HAL_SD_H */
phungductung 0:8ede47d38d10 773
phungductung 0:8ede47d38d10 774 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/