Revision 3:c8e6635e6f4b, committed 2016-10-28

Comitter:

pedro_C

Date:

Fri Oct 28 13:37:10 2016 +0000

Parent:

2:6d058686efbf

Commit message:

test

Changed in this revision

diff -r 6d058686efbf -r c8e6635e6f4b main.cpp
--- a/main.cpp	Thu Mar 12 08:22:00 2015 +0000
+++ b/main.cpp	Fri Oct 28 13:37:10 2016 +0000
@@ -1,24 +1,66 @@
 #include "mbed.h"
- 
-AnalogIn analog_value(A0);
- 
-DigitalOut led(LED1);
 
-int main() {
+AnalogIn analog_1(PA_3);
+AnalogIn analog_2(PC_0);
+AnalogIn analog_3(PC_3);
+AnalogIn analog_4(PF_3);
+AnalogIn analog_5(PF_10);
+AnalogIn analog_6(PA_7);
+AnalogIn analog_7(PF_8);
+AnalogIn analog_8(PF_7);
+AnalogIn analog_9(PF_9);
+
+Serial pc(USBTX,USBRX);
+
+Timer t;
+
+
+int main()
+{
+    t.start();
+    pc.baud(115200);
     float meas;
-    
-    printf("\nAnalogIn example\n");
-    
+
+    // pc.printf("\nAnalogIn example\n");
+
     while(1) {
-        meas = analog_value.read(); // Converts and read the analog input value (value from 0.0 to 1.0)
+        pc.printf("%f seconds\t", t.read());
+        meas = analog_1.read(); // Converts and read the analog input value (value from 0.0 to 1.0)
+        meas = meas * 3300; // Change the value to be in the 0 to 3300 range
+        pc.printf("%.0f mV, \t", meas);
+
+        meas = analog_2.read(); // Converts and read the analog input value (value from 0.0 to 1.0)
+        meas = meas * 3300; // Change the value to be in the 0 to 3300 range
+        pc.printf("%.0f mV, \t", meas);
+
+        meas = analog_3.read(); // Converts and read the analog input value (value from 0.0 to 1.0)
+        meas = meas * 3300; // Change the value to be in the 0 to 3300 range
+        pc.printf("%.0f mV, \t", meas);
+
+        meas = analog_4.read(); // Converts and read the analog input value (value from 0.0 to 1.0)
         meas = meas * 3300; // Change the value to be in the 0 to 3300 range
-        printf("measure = %.0f mV\n", meas);
-        if (meas > 2000) { // If the value is greater than 2V then switch the LED on
-          led = 1;
-        }
-        else {
-          led = 0;
-        }
-        wait(0.2); // 200 ms
+        pc.printf("%.0f mV, \t", meas);
+
+        meas = analog_5.read(); // Converts and read the analog input value (value from 0.0 to 1.0)
+        meas = meas * 3300; // Change the value to be in the 0 to 3300 range
+        pc.printf("%.0f mV, \t", meas);
+
+        meas = analog_6.read(); // Converts and read the analog input value (value from 0.0 to 1.0)
+        meas = meas * 3300; // Change the value to be in the 0 to 3300 range
+        pc.printf("%.0f mV, \t\t", meas);
+
+        meas = analog_7.read(); // Converts and read the analog input value (value from 0.0 to 1.0)
+        meas = meas * 3300; // Change the value to be in the 0 to 3300 range
+        pc.printf("%.0f mV, \t", meas);
+
+        meas = analog_8.read(); // Converts and read the analog input value (value from 0.0 to 1.0)
+        meas = meas * 3300; // Change the value to be in the 0 to 3300 range
+        pc.printf("%.0f mV, \t", meas);
+
+        meas = analog_9.read(); // Converts and read the analog input value (value from 0.0 to 1.0)
+        meas = meas * 3300; // Change the value to be in the 0 to 3300 range
+        pc.printf("%.0f mV, \n", meas);
+
+        wait_ms(20);
     }
 }

diff -r 6d058686efbf -r c8e6635e6f4b mbed.bld
--- a/mbed.bld	Thu Mar 12 08:22:00 2015 +0000
+++ b/mbed.bld	Fri Oct 28 13:37:10 2016 +0000
@@ -1,1 +1,1 @@
-http://mbed.org/users/mbed_official/code/mbed/builds/7e07b6fb45cf
\ No newline at end of file
+http://mbed.org/users/mbed_official/code/mbed/builds/25aea2a3f4e3
\ No newline at end of file