Fork with intent to refactor and add support for American 902-928(915) Frequency Bands
sx1276/sx1276-mbed-hal.h@109:528f37db941f, 2018-02-20 (annotated)
- Committer:
- Helmut Tschemernjak
- Date:
- Tue Feb 20 14:56:20 2018 +0100
- Revision:
- 109:528f37db941f
- Parent:
- 102:3e0f7696f4a5
- Child:
- 111:c47d5224a2d1
Switched to LowPowerTimeout when available, this avoids
deepsleep locks due to regular timers being active
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
GregCr | 0:e6ceb13d2d05 | 1 | /* |
GregCr | 0:e6ceb13d2d05 | 2 | / _____) _ | | |
GregCr | 0:e6ceb13d2d05 | 3 | ( (____ _____ ____ _| |_ _____ ____| |__ |
GregCr | 0:e6ceb13d2d05 | 4 | \____ \| ___ | (_ _) ___ |/ ___) _ \ |
GregCr | 0:e6ceb13d2d05 | 5 | _____) ) ____| | | || |_| ____( (___| | | | |
GregCr | 0:e6ceb13d2d05 | 6 | (______/|_____)_|_|_| \__)_____)\____)_| |_| |
mluis | 22:7f3aab69cca9 | 7 | (C) 2014 Semtech |
GregCr | 0:e6ceb13d2d05 | 8 | |
GregCr | 0:e6ceb13d2d05 | 9 | Description: - |
GregCr | 0:e6ceb13d2d05 | 10 | |
GregCr | 0:e6ceb13d2d05 | 11 | License: Revised BSD License, see LICENSE.TXT file include in the project |
GregCr | 0:e6ceb13d2d05 | 12 | |
GregCr | 0:e6ceb13d2d05 | 13 | Maintainers: Miguel Luis, Gregory Cristian and Nicolas Huguenin |
GregCr | 0:e6ceb13d2d05 | 14 | */ |
Helmut Tschemernjak | 34:07e89f23c734 | 15 | |
Helmut Tschemernjak | 34:07e89f23c734 | 16 | /* |
Helmut Tschemernjak | 38:d9189d958db8 | 17 | * additional development to make it more generic across multiple OS versions |
Helmut Tschemernjak | 34:07e89f23c734 | 18 | * (c) 2017 Helmut Tschemernjak |
Helmut Tschemernjak | 34:07e89f23c734 | 19 | * 30826 Garbsen (Hannover) Germany |
Helmut Tschemernjak | 34:07e89f23c734 | 20 | */ |
Helmut Tschemernjak | 34:07e89f23c734 | 21 | |
Helmut Tschemernjak | 39:706c32eda7e7 | 22 | #ifndef __SX1276_MBED_HAL_H__ |
Helmut Tschemernjak | 39:706c32eda7e7 | 23 | #define __SX1276_MBED_HAL_H__ |
Helmut Tschemernjak | 65:b2d98328fcba | 24 | |
Helmut Tschemernjak | 65:b2d98328fcba | 25 | |
GregCr | 0:e6ceb13d2d05 | 26 | #include "sx1276.h" |
GregCr | 0:e6ceb13d2d05 | 27 | |
Helmut Tschemernjak | 38:d9189d958db8 | 28 | |
Helmut Tschemernjak | 65:b2d98328fcba | 29 | #ifdef __MBED__ |
Helmut Tschemernjak | 65:b2d98328fcba | 30 | #define XSPI SPI |
Helmut Tschemernjak | 65:b2d98328fcba | 31 | #endif |
Helmut Tschemernjak | 65:b2d98328fcba | 32 | |
Helmut Tschemernjak | 109:528f37db941f | 33 | #ifdef DEVICE_LOWPOWERTIMER |
Helmut Tschemernjak | 109:528f37db941f | 34 | #define MyTimeout LowPowerTimeout |
Helmut Tschemernjak | 109:528f37db941f | 35 | #else |
Helmut Tschemernjak | 109:528f37db941f | 36 | #define MyTimeout Timeout |
Helmut Tschemernjak | 109:528f37db941f | 37 | #endif |
Helmut Tschemernjak | 38:d9189d958db8 | 38 | |
Helmut Tschemernjak | 38:d9189d958db8 | 39 | /*! |
Helmut Tschemernjak | 65:b2d98328fcba | 40 | * Actual implementation of a SX1276 radio, includes some modifications to make it |
Helmut Tschemernjak | 65:b2d98328fcba | 41 | * compatible with the MB1 LAS board |
GregCr | 0:e6ceb13d2d05 | 42 | */ |
Helmut Tschemernjak | 34:07e89f23c734 | 43 | class SX1276Generic : public SX1276 |
GregCr | 0:e6ceb13d2d05 | 44 | { |
GregCr | 0:e6ceb13d2d05 | 45 | protected: |
GregCr | 0:e6ceb13d2d05 | 46 | /*! |
GregCr | 0:e6ceb13d2d05 | 47 | * Antenna switch GPIO pins objects |
GregCr | 0:e6ceb13d2d05 | 48 | */ |
Helmut Tschemernjak | 46:e78a1d0391ac | 49 | DigitalOut *_antSwitch; |
Helmut Tschemernjak | 46:e78a1d0391ac | 50 | DigitalOut *_antSwitchTX; |
Helmut Tschemernjak | 46:e78a1d0391ac | 51 | DigitalOut *_antSwitchTXBoost; |
Helmut Tschemernjak | 34:07e89f23c734 | 52 | |
Helmut Tschemernjak | 34:07e89f23c734 | 53 | /*! |
Helmut Tschemernjak | 34:07e89f23c734 | 54 | * SX1276 Reset pin |
Helmut Tschemernjak | 34:07e89f23c734 | 55 | */ |
Helmut Tschemernjak | 34:07e89f23c734 | 56 | DigitalInOut *_reset; |
Helmut Tschemernjak | 34:07e89f23c734 | 57 | |
Helmut Tschemernjak | 34:07e89f23c734 | 58 | /*! |
Helmut Tschemernjak | 34:07e89f23c734 | 59 | * TCXO being used with the Murata Module |
Helmut Tschemernjak | 34:07e89f23c734 | 60 | */ |
Helmut Tschemernjak | 34:07e89f23c734 | 61 | DigitalOut *_tcxo; |
mluis | 25:3778e6204cc1 | 62 | |
Helmut Tschemernjak | 34:07e89f23c734 | 63 | /*! |
Helmut Tschemernjak | 34:07e89f23c734 | 64 | * SPI Interface |
Helmut Tschemernjak | 34:07e89f23c734 | 65 | */ |
Helmut Tschemernjak | 65:b2d98328fcba | 66 | XSPI *_spi; // mosi, miso, sclk |
Helmut Tschemernjak | 34:07e89f23c734 | 67 | DigitalOut *_nss; |
Helmut Tschemernjak | 34:07e89f23c734 | 68 | |
Helmut Tschemernjak | 34:07e89f23c734 | 69 | /*! |
Helmut Tschemernjak | 34:07e89f23c734 | 70 | * SX1276 DIO pins |
Helmut Tschemernjak | 34:07e89f23c734 | 71 | */ |
Helmut Tschemernjak | 34:07e89f23c734 | 72 | InterruptIn *_dio0; |
Helmut Tschemernjak | 34:07e89f23c734 | 73 | InterruptIn *_dio1; |
Helmut Tschemernjak | 34:07e89f23c734 | 74 | InterruptIn *_dio2; |
Helmut Tschemernjak | 34:07e89f23c734 | 75 | InterruptIn *_dio3; |
Helmut Tschemernjak | 34:07e89f23c734 | 76 | InterruptIn *_dio4; |
Helmut Tschemernjak | 34:07e89f23c734 | 77 | DigitalIn *_dio5; |
Helmut Tschemernjak | 34:07e89f23c734 | 78 | |
Helmut Tschemernjak | 42:72deced1a4c4 | 79 | /*! |
Helmut Tschemernjak | 42:72deced1a4c4 | 80 | * Tx and Rx timers |
Helmut Tschemernjak | 42:72deced1a4c4 | 81 | */ |
Helmut Tschemernjak | 109:528f37db941f | 82 | MyTimeout txTimeoutTimer; |
Helmut Tschemernjak | 109:528f37db941f | 83 | MyTimeout rxTimeoutTimer; |
Helmut Tschemernjak | 109:528f37db941f | 84 | MyTimeout rxTimeoutSyncWord; |
Helmut Tschemernjak | 38:d9189d958db8 | 85 | |
Helmut Tschemernjak | 38:d9189d958db8 | 86 | |
GregCr | 0:e6ceb13d2d05 | 87 | private: |
Helmut Tschemernjak | 39:706c32eda7e7 | 88 | /*! |
Helmut Tschemernjak | 39:706c32eda7e7 | 89 | * triggers definition |
Helmut Tschemernjak | 39:706c32eda7e7 | 90 | */ |
Helmut Tschemernjak | 39:706c32eda7e7 | 91 | typedef void (SX1276Generic::*Trigger)(void); |
Helmut Tschemernjak | 39:706c32eda7e7 | 92 | |
mluis | 25:3778e6204cc1 | 93 | |
GregCr | 0:e6ceb13d2d05 | 94 | public: |
Helmut Tschemernjak | 34:07e89f23c734 | 95 | SX1276Generic( RadioEvents_t *events, BoardType_t board, |
GregCr | 0:e6ceb13d2d05 | 96 | PinName mosi, PinName miso, PinName sclk, PinName nss, PinName reset, |
GregCr | 0:e6ceb13d2d05 | 97 | PinName dio0, PinName dio1, PinName dio2, PinName dio3, PinName dio4, PinName dio5, |
Helmut Tschemernjak | 102:3e0f7696f4a5 | 98 | PinName antSwitch = NC, PinName antSwitchTX = NC, PinName antSwitchTXBoost = NC, PinName tcxo = NC); |
mluis | 25:3778e6204cc1 | 99 | |
Helmut Tschemernjak | 34:07e89f23c734 | 100 | |
Helmut Tschemernjak | 34:07e89f23c734 | 101 | SX1276Generic( RadioEvents_t *events ); |
mluis | 25:3778e6204cc1 | 102 | |
Helmut Tschemernjak | 34:07e89f23c734 | 103 | virtual ~SX1276Generic(); |
mluis | 25:3778e6204cc1 | 104 | |
mluis | 25:3778e6204cc1 | 105 | protected: |
GregCr | 0:e6ceb13d2d05 | 106 | /*! |
GregCr | 0:e6ceb13d2d05 | 107 | * @brief Initializes the radio I/Os pins interface |
GregCr | 0:e6ceb13d2d05 | 108 | */ |
GregCr | 0:e6ceb13d2d05 | 109 | virtual void IoInit( void ); |
mluis | 25:3778e6204cc1 | 110 | |
GregCr | 0:e6ceb13d2d05 | 111 | /*! |
GregCr | 0:e6ceb13d2d05 | 112 | * @brief Initializes the radio SPI |
GregCr | 0:e6ceb13d2d05 | 113 | */ |
GregCr | 0:e6ceb13d2d05 | 114 | virtual void SpiInit( void ); |
mluis | 25:3778e6204cc1 | 115 | |
GregCr | 0:e6ceb13d2d05 | 116 | /*! |
GregCr | 0:e6ceb13d2d05 | 117 | * @brief Initializes DIO IRQ handlers |
GregCr | 0:e6ceb13d2d05 | 118 | * |
GregCr | 0:e6ceb13d2d05 | 119 | * @param [IN] irqHandlers Array containing the IRQ callback functions |
GregCr | 0:e6ceb13d2d05 | 120 | */ |
GregCr | 0:e6ceb13d2d05 | 121 | virtual void IoIrqInit( DioIrqHandler *irqHandlers ); |
GregCr | 0:e6ceb13d2d05 | 122 | |
GregCr | 0:e6ceb13d2d05 | 123 | /*! |
GregCr | 0:e6ceb13d2d05 | 124 | * @brief De-initializes the radio I/Os pins interface. |
GregCr | 0:e6ceb13d2d05 | 125 | * |
GregCr | 0:e6ceb13d2d05 | 126 | * \remark Useful when going in MCU lowpower modes |
GregCr | 0:e6ceb13d2d05 | 127 | */ |
GregCr | 0:e6ceb13d2d05 | 128 | virtual void IoDeInit( void ); |
GregCr | 0:e6ceb13d2d05 | 129 | |
GregCr | 0:e6ceb13d2d05 | 130 | /*! |
GregCr | 0:e6ceb13d2d05 | 131 | * @brief Gets the board PA selection configuration |
GregCr | 0:e6ceb13d2d05 | 132 | * |
GregCr | 0:e6ceb13d2d05 | 133 | * @param [IN] channel Channel frequency in Hz |
GregCr | 0:e6ceb13d2d05 | 134 | * @retval PaSelect RegPaConfig PaSelect value |
GregCr | 0:e6ceb13d2d05 | 135 | */ |
GregCr | 0:e6ceb13d2d05 | 136 | virtual uint8_t GetPaSelect( uint32_t channel ); |
GregCr | 0:e6ceb13d2d05 | 137 | |
GregCr | 0:e6ceb13d2d05 | 138 | /*! |
GregCr | 0:e6ceb13d2d05 | 139 | * @brief Set the RF Switch I/Os pins in Low Power mode |
GregCr | 0:e6ceb13d2d05 | 140 | * |
GregCr | 0:e6ceb13d2d05 | 141 | * @param [IN] status enable or disable |
GregCr | 0:e6ceb13d2d05 | 142 | */ |
GregCr | 0:e6ceb13d2d05 | 143 | virtual void SetAntSwLowPower( bool status ); |
GregCr | 0:e6ceb13d2d05 | 144 | |
GregCr | 0:e6ceb13d2d05 | 145 | /*! |
GregCr | 0:e6ceb13d2d05 | 146 | * @brief Initializes the RF Switch I/Os pins interface |
GregCr | 0:e6ceb13d2d05 | 147 | */ |
GregCr | 0:e6ceb13d2d05 | 148 | virtual void AntSwInit( void ); |
GregCr | 0:e6ceb13d2d05 | 149 | |
GregCr | 0:e6ceb13d2d05 | 150 | /*! |
GregCr | 0:e6ceb13d2d05 | 151 | * @brief De-initializes the RF Switch I/Os pins interface |
GregCr | 0:e6ceb13d2d05 | 152 | * |
Helmut Tschemernjak | 31:e50929bd3f32 | 153 | * @remark Needed to decrease the power consumption in MCU lowpower modes |
GregCr | 0:e6ceb13d2d05 | 154 | */ |
GregCr | 0:e6ceb13d2d05 | 155 | virtual void AntSwDeInit( void ); |
GregCr | 0:e6ceb13d2d05 | 156 | |
GregCr | 0:e6ceb13d2d05 | 157 | /*! |
GregCr | 0:e6ceb13d2d05 | 158 | * @brief Controls the antena switch if necessary. |
GregCr | 0:e6ceb13d2d05 | 159 | * |
Helmut Tschemernjak | 31:e50929bd3f32 | 160 | * @remark see errata note |
GregCr | 0:e6ceb13d2d05 | 161 | * |
Helmut Tschemernjak | 31:e50929bd3f32 | 162 | * @param [IN] opMode Current radio operating mode |
GregCr | 0:e6ceb13d2d05 | 163 | */ |
Helmut Tschemernjak | 31:e50929bd3f32 | 164 | virtual void SetAntSw( uint8_t opMode ); |
Helmut Tschemernjak | 38:d9189d958db8 | 165 | |
Helmut Tschemernjak | 38:d9189d958db8 | 166 | /* |
Helmut Tschemernjak | 38:d9189d958db8 | 167 | * The the Timeout for a given Timer. |
Helmut Tschemernjak | 38:d9189d958db8 | 168 | */ |
Helmut Tschemernjak | 44:544add59b26d | 169 | virtual void SetTimeout(TimeoutTimer_t timer, timeoutFuncPtr, int timeout_ms = 0); |
mluis | 25:3778e6204cc1 | 170 | |
Helmut Tschemernjak | 64:b721e6ab656a | 171 | /* |
Helmut Tschemernjak | 64:b721e6ab656a | 172 | * A simple ms sleep |
Helmut Tschemernjak | 64:b721e6ab656a | 173 | */ |
Helmut Tschemernjak | 64:b721e6ab656a | 174 | virtual void Sleep_ms(int ms); |
Helmut Tschemernjak | 64:b721e6ab656a | 175 | |
Helmut Tschemernjak | 64:b721e6ab656a | 176 | |
mluis | 25:3778e6204cc1 | 177 | public: |
Helmut Tschemernjak | 38:d9189d958db8 | 178 | |
GregCr | 0:e6ceb13d2d05 | 179 | /*! |
GregCr | 2:5eb3066446dd | 180 | * @brief Detect the board connected by reading the value of the antenna switch pin |
GregCr | 2:5eb3066446dd | 181 | */ |
Helmut Tschemernjak | 31:e50929bd3f32 | 182 | virtual uint8_t DetectBoardType( void ); |
mluis | 25:3778e6204cc1 | 183 | |
GregCr | 2:5eb3066446dd | 184 | /*! |
GregCr | 0:e6ceb13d2d05 | 185 | * @brief Checks if the given RF frequency is supported by the hardware |
GregCr | 0:e6ceb13d2d05 | 186 | * |
GregCr | 0:e6ceb13d2d05 | 187 | * @param [IN] frequency RF frequency to be checked |
GregCr | 0:e6ceb13d2d05 | 188 | * @retval isSupported [true: supported, false: unsupported] |
GregCr | 0:e6ceb13d2d05 | 189 | */ |
GregCr | 0:e6ceb13d2d05 | 190 | virtual bool CheckRfFrequency( uint32_t frequency ); |
mluis | 25:3778e6204cc1 | 191 | |
mluis | 25:3778e6204cc1 | 192 | /*! |
GregCr | 0:e6ceb13d2d05 | 193 | * @brief Writes the radio register at the specified address |
GregCr | 0:e6ceb13d2d05 | 194 | * |
GregCr | 0:e6ceb13d2d05 | 195 | * @param [IN]: addr Register address |
GregCr | 0:e6ceb13d2d05 | 196 | * @param [IN]: data New register value |
GregCr | 0:e6ceb13d2d05 | 197 | */ |
GregCr | 0:e6ceb13d2d05 | 198 | virtual void Write ( uint8_t addr, uint8_t data ) ; |
mluis | 25:3778e6204cc1 | 199 | |
GregCr | 0:e6ceb13d2d05 | 200 | /*! |
GregCr | 0:e6ceb13d2d05 | 201 | * @brief Reads the radio register at the specified address |
GregCr | 0:e6ceb13d2d05 | 202 | * |
GregCr | 0:e6ceb13d2d05 | 203 | * @param [IN]: addr Register address |
GregCr | 0:e6ceb13d2d05 | 204 | * @retval data Register value |
GregCr | 0:e6ceb13d2d05 | 205 | */ |
GregCr | 0:e6ceb13d2d05 | 206 | virtual uint8_t Read ( uint8_t addr ) ; |
mluis | 25:3778e6204cc1 | 207 | |
GregCr | 0:e6ceb13d2d05 | 208 | /*! |
GregCr | 0:e6ceb13d2d05 | 209 | * @brief Writes multiple radio registers starting at address |
GregCr | 0:e6ceb13d2d05 | 210 | * |
GregCr | 0:e6ceb13d2d05 | 211 | * @param [IN] addr First Radio register address |
GregCr | 0:e6ceb13d2d05 | 212 | * @param [IN] buffer Buffer containing the new register's values |
GregCr | 0:e6ceb13d2d05 | 213 | * @param [IN] size Number of registers to be written |
GregCr | 0:e6ceb13d2d05 | 214 | */ |
Helmut Tschemernjak | 51:aef3234bcb71 | 215 | virtual void Write( uint8_t addr, void *buffer, uint8_t size ) ; |
mluis | 25:3778e6204cc1 | 216 | |
GregCr | 0:e6ceb13d2d05 | 217 | /*! |
GregCr | 0:e6ceb13d2d05 | 218 | * @brief Reads multiple radio registers starting at address |
GregCr | 0:e6ceb13d2d05 | 219 | * |
GregCr | 0:e6ceb13d2d05 | 220 | * @param [IN] addr First Radio register address |
GregCr | 0:e6ceb13d2d05 | 221 | * @param [OUT] buffer Buffer where to copy the registers data |
GregCr | 0:e6ceb13d2d05 | 222 | * @param [IN] size Number of registers to be read |
GregCr | 0:e6ceb13d2d05 | 223 | */ |
Helmut Tschemernjak | 51:aef3234bcb71 | 224 | virtual void Read ( uint8_t addr, void *buffer, uint8_t size ) ; |
mluis | 25:3778e6204cc1 | 225 | |
GregCr | 0:e6ceb13d2d05 | 226 | /*! |
GregCr | 0:e6ceb13d2d05 | 227 | * @brief Writes the buffer contents to the SX1276 FIFO |
GregCr | 0:e6ceb13d2d05 | 228 | * |
GregCr | 0:e6ceb13d2d05 | 229 | * @param [IN] buffer Buffer containing data to be put on the FIFO. |
GregCr | 0:e6ceb13d2d05 | 230 | * @param [IN] size Number of bytes to be written to the FIFO |
GregCr | 0:e6ceb13d2d05 | 231 | */ |
Helmut Tschemernjak | 51:aef3234bcb71 | 232 | virtual void WriteFifo( void *buffer, uint8_t size ) ; |
GregCr | 0:e6ceb13d2d05 | 233 | |
GregCr | 0:e6ceb13d2d05 | 234 | /*! |
GregCr | 0:e6ceb13d2d05 | 235 | * @brief Reads the contents of the SX1276 FIFO |
GregCr | 0:e6ceb13d2d05 | 236 | * |
GregCr | 0:e6ceb13d2d05 | 237 | * @param [OUT] buffer Buffer where to copy the FIFO read data. |
GregCr | 0:e6ceb13d2d05 | 238 | * @param [IN] size Number of bytes to be read from the FIFO |
GregCr | 0:e6ceb13d2d05 | 239 | */ |
Helmut Tschemernjak | 51:aef3234bcb71 | 240 | virtual void ReadFifo( void *buffer, uint8_t size ) ; |
mluis | 25:3778e6204cc1 | 241 | |
GregCr | 0:e6ceb13d2d05 | 242 | /*! |
GregCr | 0:e6ceb13d2d05 | 243 | * @brief Reset the SX1276 |
GregCr | 0:e6ceb13d2d05 | 244 | */ |
GregCr | 0:e6ceb13d2d05 | 245 | virtual void Reset( void ); |
Helmut Tschemernjak | 61:08b50780eb91 | 246 | |
Helmut Tschemernjak | 61:08b50780eb91 | 247 | /*! |
Helmut Tschemernjak | 61:08b50780eb91 | 248 | * \brief Sets the radio output power. |
Helmut Tschemernjak | 61:08b50780eb91 | 249 | * |
Helmut Tschemernjak | 61:08b50780eb91 | 250 | * @param [IN] power Sets the RF output power |
Helmut Tschemernjak | 61:08b50780eb91 | 251 | */ |
Helmut Tschemernjak | 61:08b50780eb91 | 252 | virtual void SetRfTxPower( int8_t power ); |
Helmut Tschemernjak | 61:08b50780eb91 | 253 | |
GregCr | 0:e6ceb13d2d05 | 254 | }; |
GregCr | 0:e6ceb13d2d05 | 255 | |
Helmut Tschemernjak | 39:706c32eda7e7 | 256 | #endif // __SX1276_MBED_HAL_H__ |