Suga koubou
DMX512, RDM send/recv library http://mbed.org/users/okini3939/notebook/dmx512
Dependents: dmx_test ArtNodeLED SPK-DVIMXR SPK-DMXer ... more
DMX512 send/recv library
DMX512 is protocol for lighting.
調光プロトコル DMX512 を送受信するライブラリです。
see: http://mbed.org/users/okini3939/notebook/dmx512/
LPC1114 support is thanks to Stanly Chen
Diff: RDM.h
- Revision:
- 19:ae8fd2ba7c53
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/RDM.h Fri Oct 20 00:44:06 2017 +0000 @@ -0,0 +1,677 @@ +/*****************************************************************/ +/* Entertainment Services Technology Association (ESTA) */ +/* ANSI E1.20 Remote Device Management (RDM) over DMX512 Networks*/ +/*****************************************************************/ +/* */ +/* RDM.h */ +/* */ +/*****************************************************************/ +/* Appendix A Defines for the RDM Protocol. */ +/* Publish date: 3/31/2006 */ +/*****************************************************************/ +/* Compiled by: Scott M. Blair 8/18/2006 */ +/* Updated 10/11/2011: Adding E1.20-2010 and E1.37-1 defines. */ +/* Updated 10/24/2014: Adding E1.37-2 defines */ +/*****************************************************************/ +/* For updates see: http://www.rdmprotocol.org */ +/*****************************************************************/ +/* Copyright 2006,2011, 2014 Litespeed Design */ +/*****************************************************************/ +/* Permission to use, copy, modify, and distribute this software */ +/* is freely granted, provided that this notice is preserved. */ +/*****************************************************************/ + +#ifndef __RDM_H__ +#define __RMD_H__ + +/* Protocol version. */ +#define E120_PROTOCOL_VERSION 0x0100 + +/* RDM START CODE (Slot 0) */ +#define E120_SC_RDM 0xCC + +/* RDM Protocol Data Structure ID's (Slot 1) */ +#define E120_SC_SUB_MESSAGE 0x01 + +/* Broadcast Device UID's */ +#define E120_BROADCAST_ALL_DEVICES_ID 0xFFFFFFFFFFFF /* (Broadcast all Manufacturers) */ +//#define ALL_DEVICES_ID 0xmmmmFFFFFFFF /* (Specific Manufacturer ID 0xmmmm) */ + +#define E120_SUB_DEVICE_ALL_CALL 0xFFFF + + +/********************************************************/ +/* Table A-1: RDM Command Classes (Slot 20) */ +/********************************************************/ +#define E120_DISCOVERY_COMMAND 0x10 +#define E120_DISCOVERY_COMMAND_RESPONSE 0x11 +#define E120_GET_COMMAND 0x20 +#define E120_GET_COMMAND_RESPONSE 0x21 +#define E120_SET_COMMAND 0x30 +#define E120_SET_COMMAND_RESPONSE 0x31 + + + +/********************************************************/ +/* Table A-2: RDM Response Type (Slot 16) */ +/********************************************************/ +#define E120_RESPONSE_TYPE_ACK 0x00 +#define E120_RESPONSE_TYPE_ACK_TIMER 0x01 +#define E120_RESPONSE_TYPE_NACK_REASON 0x02 /* See Table A-17 */ +#define E120_RESPONSE_TYPE_ACK_OVERFLOW 0x03 /* Additional Response Data available beyond single response length.*/ + + +/********************************************************/ +/* Table A-3: RDM Parameter ID's (Slots 21-22) */ +/********************************************************/ +/* Category - Network Management */ +#define E120_DISC_UNIQUE_BRANCH 0x0001 +#define E120_DISC_MUTE 0x0002 +#define E120_DISC_UN_MUTE 0x0003 +#define E120_PROXIED_DEVICES 0x0010 +#define E120_PROXIED_DEVICE_COUNT 0x0011 +#define E120_COMMS_STATUS 0x0015 + +/* Category - Status Collection */ +#define E120_QUEUED_MESSAGE 0x0020 /* See Table A-4 */ +#define E120_STATUS_MESSAGES 0x0030 /* See Table A-4 */ +#define E120_STATUS_ID_DESCRIPTION 0x0031 +#define E120_CLEAR_STATUS_ID 0x0032 +#define E120_SUB_DEVICE_STATUS_REPORT_THRESHOLD 0x0033 /* See Table A-4 */ + +/* Category - RDM Information */ +#define E120_SUPPORTED_PARAMETERS 0x0050 /* Support required only if supporting Parameters beyond the minimum required set.*/ +#define E120_PARAMETER_DESCRIPTION 0x0051 /* Support required for Manufacturer-Specific PIDs exposed in SUPPORTED_PARAMETERS message */ + +/* Category - Product Information */ +#define E120_DEVICE_INFO 0x0060 +#define E120_PRODUCT_DETAIL_ID_LIST 0x0070 +#define E120_DEVICE_MODEL_DESCRIPTION 0x0080 +#define E120_MANUFACTURER_LABEL 0x0081 +#define E120_DEVICE_LABEL 0x0082 +#define E120_FACTORY_DEFAULTS 0x0090 +#define E120_LANGUAGE_CAPABILITIES 0x00A0 +#define E120_LANGUAGE 0x00B0 +#define E120_SOFTWARE_VERSION_LABEL 0x00C0 +#define E120_BOOT_SOFTWARE_VERSION_ID 0x00C1 +#define E120_BOOT_SOFTWARE_VERSION_LABEL 0x00C2 + +/* Category - DMX512 Setup */ +#define E120_DMX_PERSONALITY 0x00E0 +#define E120_DMX_PERSONALITY_DESCRIPTION 0x00E1 +#define E120_DMX_START_ADDRESS 0x00F0 /* Support required if device uses a DMX512 Slot. */ +#define E120_SLOT_INFO 0x0120 +#define E120_SLOT_DESCRIPTION 0x0121 +#define E120_DEFAULT_SLOT_VALUE 0x0122 +#define E137_1_DMX_BLOCK_ADDRESS 0x0140 /* Defined in ANSI E1.37-1 document */ +#define E137_1_DMX_FAIL_MODE 0x0141 /* Defined in ANSI E1.37-1 document */ +#define E137_1_DMX_STARTUP_MODE 0x0142 /* Defined in ANSI E1.37-1 document */ + + +/* Category - Sensors */ +#define E120_SENSOR_DEFINITION 0x0200 +#define E120_SENSOR_VALUE 0x0201 +#define E120_RECORD_SENSORS 0x0202 + +/* Category - Dimmer Settings */ +#define E137_1_DIMMER_INFO 0x0340 +#define E137_1_MINIMUM_LEVEL 0x0341 +#define E137_1_MAXIMUM_LEVEL 0x0342 +#define E137_1_CURVE 0x0343 +#define E137_1_CURVE_DESCRIPTION 0x0344 /* Support required if CURVE is supported */ +#define E137_1_OUTPUT_RESPONSE_TIME 0x0345 +#define E137_1_OUTPUT_RESPONSE_TIME_DESCRIPTION 0x0346 /* Support required if OUTPUT_RESPONSE_TIME is supported */ +#define E137_1_MODULATION_FREQUENCY 0x0347 +#define E137_1_MODULATION_FREQUENCY_DESCRIPTION 0x0348 /* Support required if MODULATION_FREQUENCY is supported */ + +/* Category - Power/Lamp Settings */ +#define E120_DEVICE_HOURS 0x0400 +#define E120_LAMP_HOURS 0x0401 +#define E120_LAMP_STRIKES 0x0402 +#define E120_LAMP_STATE 0x0403 /* See Table A-8 */ +#define E120_LAMP_ON_MODE 0x0404 /* See Table A-9 */ +#define E120_DEVICE_POWER_CYCLES 0x0405 +#define E137_1_BURN_IN 0x0440 /* Defined in ANSI E1.37-1 */ + +/* Category - Display Settings */ +#define E120_DISPLAY_INVERT 0x0500 +#define E120_DISPLAY_LEVEL 0x0501 + +/* Category - Configuration */ +#define E120_PAN_INVERT 0x0600 +#define E120_TILT_INVERT 0x0601 +#define E120_PAN_TILT_SWAP 0x0602 +#define E120_REAL_TIME_CLOCK 0x0603 +#define E137_1_LOCK_PIN 0x0640 /* Defined in ANSI E1.37-1 */ +#define E137_1_LOCK_STATE 0x0641 /* Defined in ANSI E1.37-1 */ +#define E137_1_LOCK_STATE_DESCRIPTION 0x0642 /* Support required if MODULATION_FREQUENCY is supported */ + +/* Category - Network Configuration*/ + +#define E137_2_LIST_INTERFACES 0x0700 /* Defined in ANSI E1.37-2 */ +#define E137_2_INTERFACE_LABEL 0x0701 /* Defined in ANSI E1.37-2 */ +#define E137_2_INTERFACE_HARDWARE_ADDRESS_TYPE1 0x0702 /* Defined in ANSI E1.37-2 */ +#define E137_2_IPV4_DHCP_MODE 0x0703 /* Defined in ANSI E1.37-2 */ +#define E137_2_IPV4_ZEROCONF_MODE 0x0704 /* Defined in ANSI E1.37-2 */ +#define E137_2_IPV4_CURRENT_ADDRESS 0x0705 /* Defined in ANSI E1.37-2 */ +#define E137_2_IPV4_STATIC_ADDRESS 0x0706 /* Defined in ANSI E1.37-2 */ +#define E137_2_INTERFACE_RENEW_DHCP 0x0707 /* Defined in ANSI E1.37-2 */ +#define E137_2_INTERFACE_RELEASE_DHCP 0x0708 /* Defined in ANSI E1.37-2 */ +#define E137_2_INTERFACE_APPLY_CONFIGURATION 0x0709 /* Defined in ANSI E1.37-2 (Support required if _ADDRESS PIDs supported) */ +#define E137_2_IPV4_DEFAULT_ROUTE 0x070A /* Defined in ANSI E1.37-2 */ +#define E137_2_DNS_IPV4_NAME_SERVER 0x070B /* Defined in ANSI E1.37-2 */ +#define E137_2_DNS_HOSTNAME 0x070C /* Defined in ANSI E1.37-2 */ +#define E137_2_DNS_DOMAIN_NAME 0x070D /* Defined in ANSI E1.37-2 */ + + +/* Category - Control */ +#define E120_IDENTIFY_DEVICE 0x1000 +#define E120_RESET_DEVICE 0x1001 +#define E120_POWER_STATE 0x1010 /* See Table A-11 */ +#define E120_PERFORM_SELFTEST 0x1020 /* See Table A-10 */ +#define E120_SELF_TEST_DESCRIPTION 0x1021 +#define E120_CAPTURE_PRESET 0x1030 +#define E120_PRESET_PLAYBACK 0x1031 /* See Table A-7 */ +#define E137_1_IDENTIFY_MODE 0x1040 /* Defined in ANSI E1.37-1 */ +#define E137_1_PRESET_INFO 0x1041 /* Defined in ANSI E1.37-1 */ +#define E137_1_PRESET_STATUS 0x1042 /* Defined in ANSI E1.37-1 */ +#define E137_1_PRESET_MERGEMODE 0x1043 /* See E1.37-1 Table A-3 */ +#define E137_1_POWER_ON_SELF_TEST 0x1044 /* Defined in ANSI E1.37-1 */ + +/* ESTA Reserved Future RDM Development 0x7FE0- + 0x7FFF + + Manufacturer-Specific PIDs 0x8000- + 0xFFDF + ESTA Reserved Future RDM Development + 0xFFE0- + 0xFFFF +*/ + + +/*****************************************************************/ +/* Discovery Mute/Un-Mute Messages Control Field. See Table 7-3. */ +/*****************************************************************/ +#define E120_CONTROL_PROXIED_DEVICE 0x0008 +#define E120_CONTROL_BOOT_LOADER 0x0004 +#define E120_CONTROL_SUB_DEVICE 0x0002 +#define E120_CONTROL_MANAGED_PROXY 0x0001 + + +/********************************************************/ +/* Table A-4: Status Type Defines */ +/********************************************************/ +#define E120_STATUS_NONE 0x00 /* Not allowed for use with GET: QUEUED_MESSAGE */ +#define E120_STATUS_GET_LAST_MESSAGE 0x01 +#define E120_STATUS_ADVISORY 0x02 +#define E120_STATUS_WARNING 0x03 +#define E120_STATUS_ERROR 0x04 +#define E120_STATUS_ADVISORY_CLEARED 0x12 /* Added in E1.20-2010 version */ +#define E120_STATUS_WARNING_CLEARED 0x13 /* Added in E1.20-2010 version */ +#define E120_STATUS_ERROR_CLEARED 0x14 /* Added in E1.20-2010 version */ + + + +/********************************************************/ +/* Table A-5: Product Category Defines */ +/********************************************************/ +#define E120_PRODUCT_CATEGORY_NOT_DECLARED 0x0000 + +/* Fixtures - intended as source of illumination See Note 1 */ +#define E120_PRODUCT_CATEGORY_FIXTURE 0x0100 /* No Fine Category declared */ +#define E120_PRODUCT_CATEGORY_FIXTURE_FIXED 0x0101 /* No pan / tilt / focus style functions */ +#define E120_PRODUCT_CATEGORY_FIXTURE_MOVING_YOKE 0x0102 +#define E120_PRODUCT_CATEGORY_FIXTURE_MOVING_MIRROR 0x0103 +#define E120_PRODUCT_CATEGORY_FIXTURE_OTHER 0x01FF /* For example, focus but no pan/tilt. */ + +/* Fixture Accessories - add-ons to fixtures or projectors */ +#define E120_PRODUCT_CATEGORY_FIXTURE_ACCESSORY 0x0200 /* No Fine Category declared. */ +#define E120_PRODUCT_CATEGORY_FIXTURE_ACCESSORY_COLOR 0x0201 /* Scrollers / Color Changers */ +#define E120_PRODUCT_CATEGORY_FIXTURE_ACCESSORY_YOKE 0x0202 /* Yoke add-on */ +#define E120_PRODUCT_CATEGORY_FIXTURE_ACCESSORY_MIRROR 0x0203 /* Moving mirror add-on */ +#define E120_PRODUCT_CATEGORY_FIXTURE_ACCESSORY_EFFECT 0x0204 /* Effects Discs */ +#define E120_PRODUCT_CATEGORY_FIXTURE_ACCESSORY_BEAM 0x0205 /* Gobo Rotators /Iris / Shutters / Dousers/ Beam modifiers. */ +#define E120_PRODUCT_CATEGORY_FIXTURE_ACCESSORY_OTHER 0x02FF + +/* Projectors - light source capable of producing realistic images from another media i.e Video / Slide / Oil Wheel / Film */ +#define E120_PRODUCT_CATEGORY_PROJECTOR 0x0300 /* No Fine Category declared. */ +#define E120_PRODUCT_CATEGORY_PROJECTOR_FIXED 0x0301 /* No pan / tilt functions. */ +#define E120_PRODUCT_CATEGORY_PROJECTOR_MOVING_YOKE 0x0302 +#define E120_PRODUCT_CATEGORY_PROJECTOR_MOVING_MIRROR 0x0303 +#define E120_PRODUCT_CATEGORY_PROJECTOR_OTHER 0x03FF + +/* Atmospheric Effect - earth/wind/fire */ +#define E120_PRODUCT_CATEGORY_ATMOSPHERIC 0x0400 /* No Fine Category declared. */ +#define E120_PRODUCT_CATEGORY_ATMOSPHERIC_EFFECT 0x0401 /* Fogger / Hazer / Flame, etc. */ +#define E120_PRODUCT_CATEGORY_ATMOSPHERIC_PYRO 0x0402 /* See Note 2. */ +#define E120_PRODUCT_CATEGORY_ATMOSPHERIC_OTHER 0x04FF + +/* Intensity Control (specifically Dimming equipment) */ +#define E120_PRODUCT_CATEGORY_DIMMER 0x0500 /* No Fine Category declared. */ +#define E120_PRODUCT_CATEGORY_DIMMER_AC_INCANDESCENT 0x0501 /* AC > 50VAC */ +#define E120_PRODUCT_CATEGORY_DIMMER_AC_FLUORESCENT 0x0502 +#define E120_PRODUCT_CATEGORY_DIMMER_AC_COLDCATHODE 0x0503 /* High Voltage outputs such as Neon or other cold cathode. */ +#define E120_PRODUCT_CATEGORY_DIMMER_AC_NONDIM 0x0504 /* Non-Dim module in dimmer rack. */ +#define E120_PRODUCT_CATEGORY_DIMMER_AC_ELV 0x0505 /* AC <= 50V such as 12/24V AC Low voltage lamps. */ +#define E120_PRODUCT_CATEGORY_DIMMER_AC_OTHER 0x0506 +#define E120_PRODUCT_CATEGORY_DIMMER_DC_LEVEL 0x0507 /* Variable DC level output. */ +#define E120_PRODUCT_CATEGORY_DIMMER_DC_PWM 0x0508 /* Chopped (PWM) output. */ +#define E120_PRODUCT_CATEGORY_DIMMER_CS_LED 0x0509 /* Specialized LED dimmer. */ +#define E120_PRODUCT_CATEGORY_DIMMER_OTHER 0x05FF + +/* Power Control (other than Dimming equipment) */ +#define E120_PRODUCT_CATEGORY_POWER 0x0600 /* No Fine Category declared. */ +#define E120_PRODUCT_CATEGORY_POWER_CONTROL 0x0601 /* Contactor racks, other forms of Power Controllers. */ +#define E120_PRODUCT_CATEGORY_POWER_SOURCE 0x0602 /* Generators */ +#define E120_PRODUCT_CATEGORY_POWER_OTHER 0x06FF + +/* Scenic Drive - including motorized effects unrelated to light source. */ +#define E120_PRODUCT_CATEGORY_SCENIC 0x0700 /* No Fine Category declared */ +#define E120_PRODUCT_CATEGORY_SCENIC_DRIVE 0x0701 /* Rotators / Kabuki drops, etc. See Note 2. */ +#define E120_PRODUCT_CATEGORY_SCENIC_OTHER 0x07FF + +/* DMX Infrastructure, conversion and interfaces */ +#define E120_PRODUCT_CATEGORY_DATA 0x0800 /* No Fine Category declared. */ +#define E120_PRODUCT_CATEGORY_DATA_DISTRIBUTION 0x0801 /* Splitters/repeaters/Ethernet products used to distribute DMX*/ +#define E120_PRODUCT_CATEGORY_DATA_CONVERSION 0x0802 /* Protocol Conversion analog decoders. */ +#define E120_PRODUCT_CATEGORY_DATA_OTHER 0x08FF + +/* Audio-Visual Equipment */ +#define E120_PRODUCT_CATEGORY_AV 0x0900 /* No Fine Category declared. */ +#define E120_PRODUCT_CATEGORY_AV_AUDIO 0x0901 /* Audio controller or device. */ +#define E120_PRODUCT_CATEGORY_AV_VIDEO 0x0902 /* Video controller or display device. */ +#define E120_PRODUCT_CATEGORY_AV_OTHER 0x09FF + +/* Parameter Monitoring Equipment See Note 3. */ +#define E120_PRODUCT_CATEGORY_MONITOR 0x0A00 /* No Fine Category declared. */ +#define E120_PRODUCT_CATEGORY_MONITOR_ACLINEPOWER 0x0A01 /* Product that monitors AC line voltage, current or power. */ +#define E120_PRODUCT_CATEGORY_MONITOR_DCPOWER 0x0A02 /* Product that monitors DC line voltage, current or power. */ +#define E120_PRODUCT_CATEGORY_MONITOR_ENVIRONMENTAL 0x0A03 /* Temperature or other environmental parameter. */ +#define E120_PRODUCT_CATEGORY_MONITOR_OTHER 0x0AFF + +/* Controllers, Backup devices */ +#define E120_PRODUCT_CATEGORY_CONTROL 0x7000 /* No Fine Category declared. */ +#define E120_PRODUCT_CATEGORY_CONTROL_CONTROLLER 0x7001 +#define E120_PRODUCT_CATEGORY_CONTROL_BACKUPDEVICE 0x7002 +#define E120_PRODUCT_CATEGORY_CONTROL_OTHER 0x70FF + +/* Test Equipment */ +#define E120_PRODUCT_CATEGORY_TEST 0x7100 /* No Fine Category declared. */ +#define E120_PRODUCT_CATEGORY_TEST_EQUIPMENT 0x7101 +#define E120_PRODUCT_CATEGORY_TEST_EQUIPMENT_OTHER 0x71FF + +/* Miscellaneous */ +#define E120_PRODUCT_CATEGORY_OTHER 0x7FFF /* For devices that aren't described within this table. */ + +/* Manufacturer Specific Categories 0x8000 - + 0xDFFF */ + + +/********************************************************/ +/* Table A-6: Product Detail Defines */ +/********************************************************/ + +#define E120_PRODUCT_DETAIL_NOT DECLARED 0x0000 + +/* Generally applied to fixtures */ +#define E120_PRODUCT_DETAIL_ARC 0x0001 +#define E120_PRODUCT_DETAIL_METAL_HALIDE 0x0002 +#define E120_PRODUCT_DETAIL_INCANDESCENT 0x0003 +#define E120_PRODUCT_DETAIL_LED 0x0004 +#define E120_PRODUCT_DETAIL_FLUROESCENT 0x0005 +#define E120_PRODUCT_DETAIL_COLDCATHODE 0x0006 /*includes Neon/Argon */ +#define E120_PRODUCT_DETAIL_ELECTROLUMINESCENT 0x0007 +#define E120_PRODUCT_DETAIL_LASER 0x0008 +#define E120_PRODUCT_DETAIL_FLASHTUBE 0x0009 /* Strobes or other flashtubes */ + +/* Generally applied to fixture accessories */ +#define E120_PRODUCT_DETAIL_COLORSCROLLER 0x0100 +#define E120_PRODUCT_DETAIL_COLORWHEEL 0x0101 +#define E120_PRODUCT_DETAIL_COLORCHANGE 0x0102 /* Semaphore or other type */ +#define E120_PRODUCT_DETAIL_IRIS_DOUSER 0x0103 +#define E120_PRODUCT_DETAIL_DIMMING_SHUTTER 0x0104 +#define E120_PRODUCT_DETAIL_PROFILE_SHUTTER 0x0105 /* hard-edge beam masking */ +#define E120_PRODUCT_DETAIL_BARNDOOR_SHUTTER 0x0106 /* soft-edge beam masking */ +#define E120_PRODUCT_DETAIL_EFFECTS_DISC 0x0107 +#define E120_PRODUCT_DETAIL_GOBO_ROTATOR 0x0108 + +/* Generally applied to Projectors */ +#define E120_PRODUCT_DETAIL_VIDEO 0x0200 +#define E120_PRODUCT_DETAIL_SLIDE 0x0201 +#define E120_PRODUCT_DETAIL_FILM 0x0202 +#define E120_PRODUCT_DETAIL_OILWHEEL 0x0203 +#define E120_PRODUCT_DETAIL_LCDGATE 0x0204 + +/* Generally applied to Atmospheric Effects */ +#define E120_PRODUCT_DETAIL_FOGGER_GLYCOL 0x0300 /* Glycol/Glycerin hazer */ +#define E120_PRODUCT_DETAIL_FOGGER_MINERALOIL 0x0301 /* White Mineral oil hazer */ +#define E120_PRODUCT_DETAIL_FOGGER_WATER 0x0302 /* Water hazer */ +#define E120_PRODUCT_DETAIL_C02 0x0303 /* Dry Ice/Carbon Dioxide based */ +#define E120_PRODUCT_DETAIL_LN2 0x0304 /* Nitrogen based */ +#define E120_PRODUCT_DETAIL_BUBBLE 0x0305 /* including foam */ +#define E120_PRODUCT_DETAIL_FLAME_PROPANE 0x0306 +#define E120_PRODUCT_DETAIL_FLAME_OTHER 0x0307 +#define E120_PRODUCT_DETAIL_OLEFACTORY_STIMULATOR 0x0308 /* Scents */ +#define E120_PRODUCT_DETAIL_SNOW 0x0309 +#define E120_PRODUCT_DETAIL_WATER_JET 0x030A /* Fountain controls etc */ +#define E120_PRODUCT_DETAIL_WIND 0x030B /* Air Mover */ +#define E120_PRODUCT_DETAIL_CONFETTI 0x030C +#define E120_PRODUCT_DETAIL_HAZARD 0x030D /* Any form of pyrotechnic control or device. */ + +/* Generally applied to Dimmers/Power controllers See Note 1 */ +#define E120_PRODUCT_DETAIL_PHASE_CONTROL 0x0400 +#define E120_PRODUCT_DETAIL_REVERSE_PHASE_CONTROL 0x0401 /* includes FET/IGBT */ +#define E120_PRODUCT_DETAIL_SINE 0x0402 +#define E120_PRODUCT_DETAIL_PWM 0x0403 +#define E120_PRODUCT_DETAIL_DC 0x0404 /* Variable voltage */ +#define E120_PRODUCT_DETAIL_HFBALLAST 0x0405 /* for Fluroescent */ +#define E120_PRODUCT_DETAIL_HFHV_NEONBALLAST 0x0406 /* for Neon/Argon and other coldcathode. */ +#define E120_PRODUCT_DETAIL_HFHV_EL 0x0407 /* for Electroluminscent */ +#define E120_PRODUCT_DETAIL_MHR_BALLAST 0x0408 /* for Metal Halide */ +#define E120_PRODUCT_DETAIL_BITANGLE_MODULATION 0x0409 +#define E120_PRODUCT_DETAIL_FREQUENCY_MODULATION 0x040A +#define E120_PRODUCT_DETAIL_HIGHFREQUENCY_12V 0x040B /* as commonly used with MR16 lamps */ +#define E120_PRODUCT_DETAIL_RELAY_MECHANICAL 0x040C /* See Note 1 */ +#define E120_PRODUCT_DETAIL_RELAY_ELECTRONIC 0x040D /* See Note 1, Note 2 */ +#define E120_PRODUCT_DETAIL_SWITCH_ELECTRONIC 0x040E /* See Note 1, Note 2 */ +#define E120_PRODUCT_DETAIL_CONTACTOR 0x040F /* See Note 1 */ + +/* Generally applied to Scenic drive */ +#define E120_PRODUCT_DETAIL_MIRRORBALL_ROTATOR 0x0500 +#define E120_PRODUCT_DETAIL_OTHER_ROTATOR 0x0501 /* includes turntables */ +#define E120_PRODUCT_DETAIL_KABUKI_DROP 0x0502 +#define E120_PRODUCT_DETAIL_CURTAIN 0x0503 /* flown or traveller */ +#define E120_PRODUCT_DETAIL_LINESET 0x0504 +#define E120_PRODUCT_DETAIL_MOTOR_CONTROL 0x0505 +#define E120_PRODUCT_DETAIL_DAMPER_CONTROL 0x0506 /* HVAC Damper */ + +/* Generally applied to Data Distribution */ +#define E120_PRODUCT_DETAIL_SPLITTER 0x0600 /* Includes buffers/repeaters */ +#define E120_PRODUCT_DETAIL_ETHERNET_NODE 0x0601 /* DMX512 to/from Ethernet */ +#define E120_PRODUCT_DETAIL_MERGE 0x0602 /* DMX512 combiner */ +#define E120_PRODUCT_DETAIL_DATAPATCH 0x0603 /* Electronic Datalink Patch */ +#define E120_PRODUCT_DETAIL_WIRELESS_LINK 0x0604 /* radio/infrared */ + +/* Generally applied to Data Conversion and Interfaces */ +#define E120_PRODUCT_DETAIL_PROTOCOL_CONVERTOR 0x0701 /* D54/AMX192/Non DMX serial links, etc to/from DMX512 */ +#define E120_PRODUCT_DETAIL_ANALOG_DEMULTIPLEX 0x0702 /* DMX to DC voltage */ +#define E120_PRODUCT_DETAIL_ANALOG_MULTIPLEX 0x0703 /* DC Voltage to DMX */ +#define E120_PRODUCT_DETAIL_SWITCH_PANEL 0x0704 /* Pushbuttons to DMX or polled using RDM */ + +/* Generally applied to Audio or Video (AV) devices */ +#define E120_PRODUCT_DETAIL_ROUTER 0x0800 /* Switching device */ +#define E120_PRODUCT_DETAIL_FADER 0x0801 /* Single channel */ +#define E120_PRODUCT_DETAIL_MIXER 0x0802 /* Multi-channel */ + +/* Generally applied to Controllers, Backup devices and Test Equipment */ +#define E120_PRODUCT_DETAIL_CHANGEOVER_MANUAL 0x0900 /* requires manual intervention to assume control of DMX line */ +#define E120_PRODUCT_DETAIL_CHANGEOVER_AUTO 0x0901 /* may automatically assume control of DMX line */ +#define E120_PRODUCT_DETAIL_TEST 0x0902 /* test equipment */ + +/* Could be applied to any category */ +#define E120_PRODUCT_DETAIL_GFI_RCD 0x0A00 /* device includes GFI/RCD trip */ +#define E120_PRODUCT_DETAIL_BATTERY 0x0A01 /* device is battery operated */ +#define E120_PRODUCT_DETAIL_CONTROLLABLE_BREAKER 0x0A02 + + +#define E120_PRODUCT_DETAIL_OTHER 0x7FFF /* for use where the Manufacturer believes that none of the + defined details apply. */ +/* Manufacturer Specific Types 0x8000- + 0xDFFF */ + +/* Note 1: Products intended for switching 50V AC / 120V DC or greater should be declared with a + Product Category of PRODUCT_CATEGORY_POWER_CONTROL. + + Products only suitable for extra low voltage switching (typically up to 50VAC / 30VDC) at currents + less than 1 ampere should be declared with a Product Category of PRODUCT_CATEGORY_DATA_CONVERSION. + + Please refer to GET: DEVICE_INFO and Table A-5 for an explanation of Product Category declaration. + Note 2: Products with TTL, MOSFET or Open Collector Transistor Outputs or similar non-isolated electronic + outputs should be declared as PRODUCT_DETAIL_SWITCH_ELECTRONIC. Use of PRODUCT_DETAIL_RELAY_ELECTRONIC + shall be restricted to devices whereby the switched circuits are electrically isolated from the control signals. */ + + +/********************************************************/ +/* Table A-7: Preset Playback Defines */ +/********************************************************/ + +#define E120_PRESET_PLAYBACK_OFF 0x0000 /* Returns to Normal DMX512 Input */ +#define E120_PRESET_PLAYBACK_ALL 0xFFFF /* Plays Scenes in Sequence if supported. */ +/* E120_PRESET_PLAYBACK_SCENE 0x0001- + 0xFFFE Plays individual Scene # */ + +/********************************************************/ +/* Table A-8: Lamp State Defines */ +/********************************************************/ + +#define E120_LAMP_OFF 0x00 /* No demonstrable light output */ +#define E120_LAMP_ON 0x01 +#define E120_LAMP_STRIKE 0x02 /* Arc-Lamp ignite */ +#define E120_LAMP_STANDBY 0x03 /* Arc-Lamp Reduced Power Mode */ +#define E120_LAMP_NOT_PRESENT 0x04 /* Lamp not installed */ +#define E120_LAMP_ERROR 0x7F +/* Manufacturer-Specific States 0x80- + 0xDF */ + +/********************************************************/ +/* Table A-9: Lamp On Mode Defines */ +/********************************************************/ + +#define E120_LAMP_ON_MODE_OFF 0x00 /* Lamp Stays off until directly instructed to Strike. */ +#define E120_LAMP_ON_MODE_DMX 0x01 /* Lamp Strikes upon receiving a DMX512 signal. */ +#define E120_LAMP_ON_MODE_ON 0x02 /* Lamp Strikes automatically at Power-up. */ +#define E120_LAMP_ON_MODE_AFTER_CAL 0x03 /* Lamp Strikes after Calibration or Homing procedure. */ +/* Manufacturer-Specific Modes 0x80- + 0xDF */ + +/********************************************************/ +/* Table A-10: Self Test Defines */ +/********************************************************/ + +#define E120_SELF_TEST_OFF 0x00 /* Turns Self Tests Off */ +/* Manufacturer Tests 0x01- + 0xFE Various Manufacturer Self Tests */ +#define E120_SELF_TEST_ALL 0xFF /* Self Test All, if applicable */ + +/********************************************************/ +/* Table A-11: Power State Defines */ +/********************************************************/ + +#define E120_POWER_STATE_FULL_OFF 0x00 /* Completely disengages power to device. Device can no longer respond. */ +#define E120_POWER_STATE_SHUTDOWN 0x01 /* Reduced power mode, may require device reset to return to + normal operation. Device still responds to messages. */ +#define E120_POWER_STATE_STANDBY 0x02 /* Reduced power mode. Device can return to NORMAL without a + reset. Device still responds to messages. */ +#define E120_POWER_STATE_NORMAL 0xFF /* Normal Operating Mode. */ + +/********************************************************/ +/* Table A-12: Sensor Type Defines */ +/********************************************************/ + +#define E120_SENS_TEMPERATURE 0x00 +#define E120_SENS_VOLTAGE 0x01 +#define E120_SENS_CURRENT 0x02 +#define E120_SENS_FREQUENCY 0x03 +#define E120_SENS_RESISTANCE 0x04 /* Eg: Cable resistance */ +#define E120_SENS_POWER 0x05 +#define E120_SENS_MASS 0x06 /* Eg: Truss load Cell */ +#define E120_SENS_LENGTH 0x07 +#define E120_SENS_AREA 0x08 +#define E120_SENS_VOLUME 0x09 /* Eg: Smoke Fluid */ +#define E120_SENS_DENSITY 0x0A +#define E120_SENS_VELOCITY 0x0B +#define E120_SENS_ACCELERATION 0x0C +#define E120_SENS_FORCE 0x0D +#define E120_SENS_ENERGY 0x0E +#define E120_SENS_PRESSURE 0x0F +#define E120_SENS_TIME 0x10 +#define E120_SENS_ANGLE 0x11 +#define E120_SENS_POSITION_X 0x12 /* E.g.: Lamp position on Truss */ +#define E120_SENS_POSITION_Y 0x13 +#define E120_SENS_POSITION_Z 0x14 +#define E120_SENS_ANGULAR_VELOCITY 0x15 /* E.g.: Wind speed */ +#define E120_SENS_LUMINOUS_INTENSITY 0x16 +#define E120_SENS_LUMINOUS_FLUX 0x17 +#define E120_SENS_ILLUMINANCE 0x18 +#define E120_SENS_CHROMINANCE_RED 0x19 +#define E120_SENS_CHROMINANCE_GREEN 0x1A +#define E120_SENS_CHROMINANCE_BLUE 0x1B +#define E120_SENS_CONTACTS 0x1C /* E.g.: Switch inputs. */ +#define E120_SENS_MEMORY 0x1D /* E.g.: ROM Size */ +#define E120_SENS_ITEMS 0x1E /* E.g.: Scroller gel frames. */ +#define E120_SENS_HUMIDITY 0x1F +#define E120_SENS_COUNTER_16BIT 0x20 +#define E120_SENS_OTHER 0x7F +/* Manufacturer-Specific Sensors 0x80- + 0xFF */ + +/********************************************************/ +/* Table A-13: Sensor Unit Defines */ +/********************************************************/ + +#define E120_UNITS_NONE 0x00 /* CONTACTS */ +#define E120_UNITS_CENTIGRADE 0x01 /* TEMPERATURE */ +#define E120_UNITS_VOLTS_DC 0x02 /* VOLTAGE */ +#define E120_UNITS_VOLTS_AC_PEAK 0x03 /* VOLTAGE */ +#define E120_UNITS_VOLTS_AC_RMS 0x04 /* VOLTAGE */ +#define E120_UNITS_AMPERE_DC 0x05 /* CURRENT */ +#define E120_UNITS_AMPERE_AC_PEAK 0x06 /* CURRENT */ +#define E120_UNITS_AMPERE_AC_RMS 0x07 /* CURRENT */ +#define E120_UNITS_HERTZ 0x08 /* FREQUENCY / ANG_VEL */ +#define E120_UNITS_OHM 0x09 /* RESISTANCE */ +#define E120_UNITS_WATT 0x0A /* POWER */ +#define E120_UNITS_KILOGRAM 0x0B /* MASS */ +#define E120_UNITS_METERS 0x0C /* LENGTH / POSITION */ +#define E120_UNITS_METERS_SQUARED 0x0D /* AREA */ +#define E120_UNITS_METERS_CUBED 0x0E /* VOLUME */ +#define E120_UNITS_KILOGRAMMES_PER_METER_CUBED 0x0F /* DENSITY */ +#define E120_UNITS_METERS_PER_SECOND 0x10 /* VELOCITY */ +#define E120_UNITS_METERS_PER_SECOND_SQUARED 0x11 /* ACCELERATION */ +#define E120_UNITS_NEWTON 0x12 /* FORCE */ +#define E120_UNITS_JOULE 0x13 /* ENERGY */ +#define E120_UNITS_PASCAL 0x14 /* PRESSURE */ +#define E120_UNITS_SECOND 0x15 /* TIME */ +#define E120_UNITS_DEGREE 0x16 /* ANGLE */ +#define E120_UNITS_STERADIAN 0x17 /* ANGLE */ +#define E120_UNITS_CANDELA 0x18 /* LUMINOUS_INTENSITY */ +#define E120_UNITS_LUMEN 0x19 /* LUMINOUS_FLUX */ +#define E120_UNITS_LUX 0x1A /* ILLUMINANCE */ +#define E120_UNITS_IRE 0x1B /* CHROMINANCE */ +#define E120_UNITS_BYTE 0x1C /* MEMORY */ +/* Manufacturer-Specific Units 0x80- + 0xFF */ + + +/********************************************************/ +/* Table A-14: Sensor Unit Prefix Defines */ +/********************************************************/ + +#define E120_PREFIX_NONE 0x00 /* Multiply by 1 */ +#define E120_PREFIX_DECI 0x01 /* Multiply by 10-1 */ +#define E120_PREFIX_CENTI 0x02 /* Multiply by 10-2 */ +#define E120_PREFIX_MILLI 0x03 /* Multiply by 10-3 */ +#define E120_PREFIX_MICRO 0x04 /* Multiply by 10-6 */ +#define E120_PREFIX_NANO 0x05 /* Multiply by 10-9 */ +#define E120_PREFIX_PICO 0x06 /* Multiply by 10-12 */ +#define E120_PREFIX_FEMPTO 0x07 /* Multiply by 10-15 */ +#define E120_PREFIX_ATTO 0x08 /* Multiply by 10-18 */ +#define E120_PREFIX_ZEPTO 0x09 /* Multiply by 10-21 */ +#define E120_PREFIX_YOCTO 0x0A /* Multiply by 10-24 */ +#define E120_PREFIX_DECA 0x11 /* Multiply by 10+1 */ +#define E120_PREFIX_HECTO 0x12 /* Multiply by 10+2 */ +#define E120_PREFIX_KILO 0x13 /* Multiply by 10+3 */ +#define E120_PREFIX_MEGA 0x14 /* Multiply by 10+6 */ +#define E120_PREFIX_GIGA 0x15 /* Multiply by 10+9 */ +#define E120_PREFIX_TERRA 0x16 /* Multiply by 10+12 */ +#define E120_PREFIX_PETA 0x17 /* Multiply by 10+15 */ +#define E120_PREFIX_EXA 0x18 /* Multiply by 10+18 */ +#define E120_PREFIX_ZETTA 0x19 /* Multiply by 10+21 */ +#define E120_PREFIX_YOTTA 0x1A /* Multiply by 10+24 */ + + +/********************************************************/ +/* Table A-15: Data Type Defines */ +/********************************************************/ + +#define E120_DS_NOT_DEFINED 0x00 /* Data type is not defined */ +#define E120_DS_BIT_FIELD 0x01 /* Data is bit packed */ +#define E120_DS_ASCII 0x02 /* Data is a string */ +#define E120_DS_UNSIGNED_BYTE 0x03 /* Data is an array of unsigned bytes */ +#define E120_DS_SIGNED_BYTE 0x04 /* Data is an array of signed bytes */ +#define E120_DS_UNSIGNED_WORD 0x05 /* Data is an array of unsigned 16-bit words */ +#define E120_DS_SIGNED_WORD 0x06 /* Data is an array of signed 16-bit words */ +#define E120_DS_UNSIGNED_DWORD 0x07 /* Data is an array of unsigned 32-bit words */ +#define E120_DS_SIGNED_DWORD 0x08 /* Data is an array of signed 32-bit words */ +/* Manufacturer-Specific Data Types 0x80- */ +/* 0xDF */ + +/********************************************************/ +/* Table A-16: Parameter Desc. Command Class Defines */ +/********************************************************/ + +#define E120_CC_GET 0x01 /* PID supports GET only */ +#define E120_CC_SET 0x02 /* PID supports SET only */ +#define E120_CC_GET_SET 0x03 /* PID supports GET & SET */ + +/********************************************************/ +/* Table A-17: Response NACK Reason Code Defines */ +/********************************************************/ + +#define E120_NR_UNKNOWN_PID 0x0000 /* The responder cannot comply with request because the message + is not implemented in responder. */ +#define E120_NR_FORMAT_ERROR 0x0001 /* The responder cannot interpret request as controller data + was not formatted correctly. */ +#define E120_NR_HARDWARE_FAULT 0x0002 /* The responder cannot comply due to an internal hardware fault*/ +#define E120_NR_PROXY_REJECT 0x0003 /* Proxy is not the RDM line master and cannot comply with message.*/ +#define E120_NR_WRITE_PROTECT 0x0004 /* SET Command normally allowed but being blocked currently. */ +#define E120_NR_UNSUPPORTED_COMMAND_CLASS 0x0005 /* Not valid for Command Class attempted. May be used where + GET allowed but SET is not supported. */ +#define E120_NR_DATA_OUT_OF_RANGE 0x0006 /* Value for given Parameter out of allowable range or + not supported. */ +#define E120_NR_BUFFER_FULL 0x0007 /* Buffer or Queue space currently has no free space to store data. */ +#define E120_NR_PACKET_SIZE_UNSUPPORTED 0x0008 /* Incoming message exceeds buffer capacity. */ +#define E120_NR_SUB_DEVICE_OUT_OF_RANGE 0x0009 /* Sub-Device is out of range or unknown. */ +#define E120_NR_PROXY_BUFFER_FULL 0x000A /* Proxy buffer is full and can not store any more Queued */ + /* Message or Status Message responses. */ +#define E137_2_NR_ACTION_NOT_SUPPORTED 0x000B /* The parameter data is valid but the SET operation cannot be */ + /* performed with the current configuration. */ + +/********************************************************************************************************************************/ +/********************************************************************************************************************************/ +/* ANSI E1.37-1 DEFINES */ +/********************************************************************************************************************************/ +/********************************************************************************************************************************/ + +/********************************************************/ +/* E1.37-1 Table A-2: Preset Programmed Defines */ +/********************************************************/ +#define E137_1_PRESET_NOT_PROGRAMMED 0x00 /* Preset Scene not programmed. */ +#define E137_1_PRESET_PROGRAMMED 0x01 /* Preset Scene programmed. */ +#define E137_1_PRESET_PROGRAMMED_READ_ONLY 0x02 /* Preset Scene read-only, factory programmed. */ + +/********************************************************/ +/* E1.37-1 Table A-3: Merge Mode Defines */ +/********************************************************/ +#define E137_1_MERGEMODE_DEFAULT 0x00 /* Preset overrides DMX512 default behavior as defined in */ + /* E1.20 PRESET_PLAYBACK */ +#define E137_1_MERGEMODE_HTP 0x01 /* Highest Takes Precedence on slot by slot basis */ +#define E137_1_MERGEMODE_LTP 0x02 /* Latest Takes Precedence from Preset or DMX512 on slot by slot */ +#define E137_1_MERGEMODE_DMX_ONLY 0x03 /* DMX512 only, Preset ignored */ +#define E137_1_MERGEMODE_OTHER 0xFF /* Other (undefined) merge mode */ + + +/********************************************************************************************************************************/ +/********************************************************************************************************************************/ +/* ANSI E1.37-2 DEFINES */ +/********************************************************************************************************************************/ +/********************************************************************************************************************************/ + +/********************************************************/ +/* E1.37-2 Table A-3: DHCP Mode Defines */ +/********************************************************/ +#define E137_2_DHCP_MODE_INACTIVE 0x00 /* IP Address was not obtained via DHCP */ +#define E137_2_DHCP_MODE_ACTIVE 0x01 /* IP Address was obtained via DHCP */ +#define E137_2_DHCP_MODE_UNKNOWN 0x02 /* The system cannot determine if address was obtained via DHCP. */ + + +#endif