Okundu Omeni
this is using the mbed os version 5-13-1
Diff: source/Types.h
- Branch:
- PassingRegression
- Revision:
- 113:888e262ff0a9
- Parent:
- 112:a0999ea4ece0
- Child:
- 114:b11bb96c09f3
--- a/source/Types.h Sat May 11 11:55:29 2019 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,965 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2018 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef BLE_GAP_TYPES_H
-#define BLE_GAP_TYPES_H
-
-#include "Duration.h"
-#include "Bounded.h"
-#include "ble/SafeEnum.h"
-
-namespace ble {
-
-/**
- * @addtogroup ble
- * @{
- * @addtogroup gap
- * @{
- */
-
-/* BLE units, using microseconds as the common denominator */
-
-/**
- * Time interval between two advertisements.
- *
- * The duration is in unit of 625µs and ranges from 0x20 to 0xFFFFFF .
- *
- * @note before Bluetooth 5 range was 0x20 to 0xFFFF.
- */
-typedef Duration<uint32_t, 625, Range<0x20, 0xFFFFFF> > adv_interval_t;
-
-/**
- * Advertising process duration.
- *
- * The duration is in unit of 10ms and ranges from 0x0001 to 0xFFFF. The special
- * value 0x0000 means the advertising process never ends; it is accessible with
- * adv_duration_t::forever().
- */
-typedef Duration<uint16_t, 10000, Range<0x00, 0xFFFF>, /* forever */ Value<uint16_t, 0x0000> > adv_duration_t;
-
-/**
- * Scan process duration.
- *
- * The duration is in unit of 10ms and ranges from 0x0001 to 0xFFFF. The special
- * value 0x0000 means the scan process never ends; it is accessible with
- * scan_duration_t::forever().
- */
-typedef Duration<uint16_t, 10000, Range<0x00, 0xFFFF>, /* forever */ Value<uint16_t, 0x0000> > scan_duration_t;
-
-/**
- * Time interval between two scan processes.
- *
- * The duration is in unit of 1.28s and ranges from 0x0001 to 0xFFFF. The special
- * value 0x0000 is used to indicate that scan_period_t is not used.
- */
-typedef Duration<uint16_t, 1280000, Range<0x00, 0xFFFF> > scan_period_t;
-
-/**
- * Time interval between two scans.
- *
- * The duration is in unit of 625µs and ranges from 0x04 to 0xFFFF.
- */
-typedef Duration<uint16_t, 625, Range<0x04, 0xFFFF> > scan_interval_t;
-
-/**
- * Duration of a scan.
- *
- * The duration is in unit of 625µs and ranges from 0x04 to 0xFFFF.
- */
-typedef Duration<uint16_t, 625, Range<0x04, 0xFFFF> > scan_window_t;
-
-/**
- * Time interval between two connection events.
- *
- * The interval is in unit of 1.250 milliseconds and ranges from 0x06 to 0xC80.
- */
-typedef Duration<uint16_t, 1250, Range<0x06, 0x0C80> > conn_interval_t;
-
-/**
- * Time after which a connection is loss of devices have not exchanged data.
- *
- * The duration is in unit of 10 milliseconds and ranges from 0x0A to 0xC80.
- *
- * @note this time should be no larger than (1 + ConnLatency) * ConnIntervalMax * 2
- */
-typedef Duration<uint16_t, 10000, Range<0x0A, 0x0C80> > supervision_timeout_t;
-
-/**
- * Duration of a connection event.
- *
- * The duration is in unit of 625µs and ranges from 0x0 to 0xFFFF .
- */
-typedef Duration<uint16_t, 625, Range<0, 0xFFFF> > conn_event_length_t;
-
-/**
- * Time after which a periodic sync link is considered lost if the receiver hasn't
- * received anything from the advertiser.
- *
- * The duration is in unit of 10 milliseconds and ranges from 0x0A to 0x4000.
- */
-typedef Duration<uint16_t, 10000, Range<0x0A, 0x4000> > sync_timeout_t;
-
-/**
- * Interval between two periodic advertising events.
- *
- * The duration is in unit of 1.250ms and ranges from 0x06 to 0xFFFF.
- */
-typedef Duration<uint16_t, 1250, Range<0x06, 0xFFFF> > periodic_interval_t;
-
-/**
- * Number of connection events that can be skipped by the slave.
- *
- * It ranges from 0 to 0x1F3.
- */
-typedef Bounded<uint16_t, 0, 0x01F3> slave_latency_t;
-
-/**
- * Handle of an advertising set.
- *
- * @note Range of valid handle is comprised between 0x00 and 0xEF.
- */
-typedef uint8_t advertising_handle_t;
-
-/**
- * Handle of a sync representing a periodic advertiser.
- *
- * @note Range of valid handle is comprised between 0x0000 and 0xFFFF.
- */
-typedef uint16_t periodic_sync_handle_t;
-
-/**
- * Encapsulates the peripheral advertising modes.
- *
- * It determines how the device appears to other scanner and peripheral
- * devices in the scanning range.
- */
-struct advertising_type_t : SafeEnum<advertising_type_t, uint8_t> {
- /// enumeration of advertising_type_t values
- enum type {
- /**
- * Device is connectable, scannable and doesn't expect connection from a
- * specific peer.
- *
- * @see Vol 3, Part C, Section 9.3.4 and Vol 6, Part B, Section 2.3.1.1.
- */
- CONNECTABLE_UNDIRECTED = 0x00,
-
- /**
- * Device is connectable and expects connection from a specific peer.
- * (3.75 ms or smaller Advertising Interval)
- * @see Vol 3, Part C, Section 9.3.3 and Vol 6, Part B, Section 2.3.1.2.
- */
- CONNECTABLE_DIRECTED = 0x01,
-
- /**
- * Device is scannable but not connectable.
- *
- * @see Vol 6, Part B, Section 2.3.1.4.
- */
- SCANNABLE_UNDIRECTED = 0x02,
-
- /**
- * Device is not connectable and not scannable.
- *
- * @see Vol 3, Part C, Section 9.3.2 and Vol 6, Part B, Section 2.3.1.3.
- */
- NON_CONNECTABLE_UNDIRECTED = 0x03,
-
- /**
- * Device is connectable and expects connection from a specific peer (sent at long user set intervals).
- */
- CONNECTABLE_DIRECTED_LOW_DUTY = 0x04,
-
-#if !defined(DOXYGEN_ONLY)
- // used by the PAL; naming in line with the the spec.
- ADV_IND = 0x00,
- ADV_DIRECT_IND = 0x01,
- ADV_SCAN_IND = 0x02,
- ADV_NONCONN_IND = 0x03,
- ADV_DIRECT_IND_LOW_DUTY_CYCLE = 0x04
-#endif
- };
-
- /**
- * Construct a new advertising_type_t value.
- *
- * @param value The value of the advertising_type_t created.
- */
- advertising_type_t(type value) : SafeEnum(value)
- {
- }
-};
-
-
-/** Used to indicate if the packet is complete and if it's truncated.
- */
-struct advertising_data_status_t : SafeEnum<advertising_data_status_t, uint8_t> {
- /// enumeration of advertising_data_status_t values
- enum type {
- COMPLETE = 0x00, /// Advertising payload complete.
- INCOMPLETE_MORE_DATA = 0x01, /// Partial advertising payload, more to come.
- INCOMPLETE_DATA_TRUNCATED = 0x02 /// Advertising payload incomplete, and no more is coming.
- };
-
- /**
- * Construct a new advertising_data_status_t value.
- *
- * @param value The value of the advertising_data_status_t created.
- */
- advertising_data_status_t(type value) : SafeEnum(value)
- {
- }
-
-#if !defined(DOXYGEN_ONLY)
-
- /**
- * Explicit constructor from a raw value.
- */
- explicit advertising_data_status_t(uint8_t raw_value) :
- SafeEnum(raw_value)
- {
- }
-
-#endif
-
-};
-
-/** Properties of an advertising event.
- */
-struct advertising_event_t {
-
-private:
- // Implementation note: The object is constructed from the field Event_Type
- // of an LE Extended Advertising.
- // Indexes and functions of bits are defined in BLUETOOTH SPECIFICATION
- // Version 5.0 | Vol 2, Part E -
- // Section 7.7.65.13 LE Extended Advertising report Event
- enum {
- CONNECTABLE_BIT = 0,
- SCANNABLE_ADVERTISING_BIT = 1,
- DIRECTED_ADVERTISING_BIT = 2,
- SCAN_RESPONSE_BIT = 3,
- LEGACY_PDU_BIT = 4,
- DATA_STATUS_INDEX = 5,
- DATA_STATUS_MASK = 0x03
- };
-
-public:
-
-#if !defined(DOXYGEN_ONLY)
-
- /** Create based on a raw value.
- *
- * @param value
- */
- explicit advertising_event_t(uint8_t value) : value(value)
- {
- }
-
-#endif
-
- /** Is advertising connectable.
- *
- * @return True if connectable.
- */
- bool connectable() const
- {
- return static_cast<bool>(value & (1 << CONNECTABLE_BIT));
- }
-
- /** Is advertising scannable.
- *
- * @return True if scannable
- */
- bool scannable_advertising() const
- {
- return static_cast<bool>(value & (1 << SCANNABLE_ADVERTISING_BIT));
- }
-
- /** Is advertising directed.
- *
- * @return True if directed.
- */
- bool directed_advertising() const
- {
- return static_cast<bool>(value & (1 << DIRECTED_ADVERTISING_BIT));
- }
-
- /** Is this a scan response.
- *
- * @return True if scan response.
- */
- bool scan_response() const
- {
- return static_cast<bool>(value & (1 << SCAN_RESPONSE_BIT));
- }
-
- /** Is this legacy advertising.
- *
- * @return True if legacy.
- */
- bool legacy_advertising() const
- {
- return static_cast<bool>(value & (1 << LEGACY_PDU_BIT));
- }
-
- /** Payload completeness status.
- *
- * @return @see advertising_data_status_t for details.
- */
- advertising_data_status_t data_status() const
- {
- return static_cast<advertising_data_status_t::type>(
- (value >> DATA_STATUS_INDEX) & DATA_STATUS_MASK
- );
- }
-
- /** Is payload complete.
- *
- * @return True if payload is coplete.
- */
- bool complete() const
- {
- return data_status() == advertising_data_status_t::COMPLETE;
- }
-
- /** Is there more data coming.
- *
- * @return True if more data coming.
- */
- bool more_data_to_come() const
- {
- return data_status() == advertising_data_status_t::INCOMPLETE_MORE_DATA;
- }
-
- /** Is the payload truncated.
- *
- * @return True if no more data coming.
- */
- bool truncated() const
- {
- return data_status() == advertising_data_status_t::INCOMPLETE_DATA_TRUNCATED;
- }
-
-private:
- uint8_t value;
-};
-
-/**
- * Identify an advertising SID. Range: [0x00, 0x0F]
- */
-typedef uint8_t advertising_sid_t;
-
-/** Received signal strength. Range <-127, 20>.
- * @note Special value 127 means RSSI is not available. */
-typedef int8_t rssi_t;
-
-/**
- * Describe the advertising power.
- *
- * Values between -127 and +126 are considered power values in dBm while
- * the special value 127 can be used as a wildcard to indicate that the host
- * has no preference or if the power information is not available.
- */
-typedef int8_t advertising_power_t;
-
-/**
- * Advertising policy filter modes.
- *
- * @see Bluetooth Core Specification 4.2 (Vol. 6), Part B, Section 4.3.2.
- */
-struct advertising_filter_policy_t : SafeEnum<advertising_filter_policy_t, uint8_t> {
- /// enumeration of advertising_filter_policy_t values
- enum type {
- /**
- * Process connection and scan requests from all devices. The whitelist is
- * not used.
- */
- NO_FILTER = 0x00,
-
- /**
- * Process connection requests from all devices but filter out scan requests
- * of devices that are not in the whitelist.
- */
- FILTER_SCAN_REQUESTS = 0x01,
-
- /**
- * Process scan requests from all devices but filter out connection requests
- * of devices that are not in the whitelist.
- */
- FILTER_CONNECTION_REQUEST = 0x02,
-
- /**
- * Filter out scan or connection requests of devices that are not in the
- * whitelist.
- */
- FILTER_SCAN_AND_CONNECTION_REQUESTS = 0x03
- };
-
- /**
- * Construct a advertising_filter_policy_t.
- * @param value The value of the advertising_filter_policy_t created.
- */
- advertising_filter_policy_t(type value) : SafeEnum(value)
- {
- }
-};
-
-/**
- * Scanning policy filter mode.
- *
- * @see Bluetooth Core Specification 4.2 (Vol. 6), Part B, Section 4.3.3.
- */
-struct scanning_filter_policy_t : SafeEnum<scanning_filter_policy_t, uint8_t> {
- /// enumeration of scanning_filter_policy_t values
- enum type {
- /**
- * Accept all advertising packets except directed advertising packets not
- * addressed to this device.
- */
- NO_FILTER = 0x00,
-
- /**
- * Accept only advertising packets from devices in the whitelist except
- * directed advertising packets not addressed to this device.
- */
- FILTER_ADVERTISING = 0x01,
-
- /**
- * Accept all advertising packets except directed advertising packets
- * where the initiator's identity address does not address this device.
- *
- * @note Directed advertising packets where the initiator's address is a
- * resolvable private address that cannot be resolved are also accepted.
- */
- NO_FILTER_INCLUDE_UNRESOLVABLE_DIRECTED = 2,
-
- /**
- * Accept all advertising packets except:
- * - Advertising packets where the advertiser's
- * identity address is not in the whitelist.
- * - Directed advertising packets where the initiator's identity address
- * does not address this device.
- *
- * @note Directed advertising packets where the initiator's address is a
- * resolvable private address that cannot be resolved are also accepted.
- */
- FILTER_ADVERTISING_INCLUDE_UNRESOLVABLE_DIRECTED = 3
- };
-
- /**
- * Construct a new instance of scanning_filter_policy_t.
- *
- * @param value The value of the scanning_filter_policy_t created.
- */
- scanning_filter_policy_t(type value) : SafeEnum(value)
- {
- }
-};
-
-/**
- * Filter policy that you can use during connection initiation.
- */
-struct initiator_filter_policy_t : SafeEnum<initiator_filter_policy_t, uint8_t> {
- /// enumeration of initiator_filter_policy_t values.
- enum type {
- /**
- * The whitelist is not used to determine which advertiser to connect to.
- */
- NO_FILTER,
-
- /**
- * The whitelist is used to determine which advertiser to connect to.
- */
- USE_WHITE_LIST
- };
-
- /**
- * Construct a initiator_filter_policy_t.
- * @param value The value of the initiator_filter_policy_t.
- */
- initiator_filter_policy_t(type value) : SafeEnum(value)
- {
- }
-};
-
-/**
- * Scanning policy filter mode.
- *
- * @see Bluetooth Core Specification 4.2 (Vol. 6), Part B, Section 4.3.3.
- */
-struct duplicates_filter_t : SafeEnum<duplicates_filter_t, uint8_t> {
- /// enumeration of duplicates_filter_t values
- enum type {
- /**
- * Disable duplicate filtering.
- */
- DISABLE,
-
- /**
- * Enable duplicate filtering.
- */
- ENABLE,
-
- /**
- * Enable duplicate filtering, and reset the cache periodically.
- */
- PERIODIC_RESET
- };
-
- /**
- * Construct a new duplicates_filter_t value.
- * @param value The value of the duplicates_filter_t created.
- */
- duplicates_filter_t(type value) : SafeEnum(value)
- {
- }
-};
-
-/**
- * Type used to model the own address used during the following GAP operations:
- * advertising, scanning and initiating
- */
-struct own_address_type_t : SafeEnum<own_address_type_t, uint8_t> {
- /// enumeration of own_address_type_t values.
- enum type {
- /**
- * Use the public device address.
- */
- PUBLIC = 0x00,
-
- /**
- * Use the random device address.
- */
- RANDOM = 0x01,
-
- /**
- * Generated resolvable private address based on the local IRK from the
- * resolving list. Use the public address if no entry match in the resolving
- * list.
- */
- RESOLVABLE_PRIVATE_ADDRESS_PUBLIC_FALLBACK = 0x02,
-
- /**
- * Generated resolvable private address based on the local IRK from the
- * resolving list. Use the random address if no entry match in the resolving
- * list.
- */
- RESOLVABLE_PRIVATE_ADDRESS_RANDOM_FALLBACK = 0x03,
- };
-
- /**
- * Construct a new instance of own_address_type_t.
- * @param value The value of the own_address_type_t created.
- */
- own_address_type_t(type value) : SafeEnum(value)
- {
- }
-};
-
-/**
- * Type of an address to connect to.
- *
- * It is used to connect to a device directly with directed advertising.
- */
-struct target_peer_address_type_t : SafeEnum<target_peer_address_type_t, uint8_t> {
- /// enumeration of target_peer_address_type_t values.
- enum type {
- PUBLIC = 0x00, /**< Public Device Address or Public Identity Address. */
- RANDOM = 0x01, /**< Random Device Address or Random (static) Identity Address. */
- };
-
- /**
- * Create a new target_peer_address_type_t.
- * @param value The value of the target_peer_address_type_t created.
- */
- target_peer_address_type_t(type value) : SafeEnum(value)
- {
- }
-};
-
-/**
- * Accuracy of the master clock.
- */
-struct clock_accuracy_t : SafeEnum<clock_accuracy_t, uint8_t> {
- /// enumeration of clock_accuracy_t values.
- enum type {
- /**
- * 500 PPM
- */
- PPM_500 = 0x00,
-
- /**
- * 250 PPM
- */
- PPM_250 = 0x01,
-
- /**
- * 150 PPM
- */
- PPM_150 = 0x02,
-
- /**
- * 100 PPM
- */
- PPM_100 = 0x03,
-
- /**
- * 75 PPM
- */
- PPM_75 = 0x04,
-
- /**
- * 50 PPM
- */
- PPM_50 = 0x05,
-
- /**
- * 30 PPM
- */
- PPM_30 = 0x06,
-
- /**
- * 20 PPM
- */
- PPM_20 = 0x07
- };
-
- /** Get clock accuracy.
- *
- * @return Parts per million as a number.
- */
- uint16_t get_ppm()
- {
- switch (value()) {
- case PPM_500:
- return 500;
- case PPM_250:
- return 250;
- case PPM_150:
- return 150;
- case PPM_100:
- return 100;
- case PPM_75:
- return 75;
- case PPM_50:
- return 50;
- case PPM_30:
- return 30;
- case PPM_20:
- return 20;
- default:
- return 0;
- }
- }
-
- /**
- * Construct a new clock_accuracy_t value.
- * @param value The value of the clock_accuracy_t created.
- */
- clock_accuracy_t(type value) : SafeEnum(value)
- {
- }
-
-#if !defined(DOXYGEN_ONLY)
-
- /**
- * Construct a new clock_accuracy_t value from a raw value.
- * @param raw_value The value of the clock accuracy.
- */
- explicit clock_accuracy_t(uint8_t raw_value) : SafeEnum(raw_value)
- {
- }
-
-#endif
-};
-
-/**
- * Enumeration of GAP roles.
- *
- * @note The BLE API does not express the broadcaster and scanner roles.
- *
- * @attention A device can fulfill different roles concurrently.
- */
-struct connection_role_t : SafeEnum<connection_role_t, uint8_t> {
- /** struct scoped enum wrapped by the class */
- enum type {
- /**
- * Central Role.
- *
- * The device can scan and initiate connection to peripherals. It
- * acts as the master when a connection is established.
- *
- * @note A central is a scanner.
- */
- CENTRAL = 0x00,
-
- /**
- * Peripheral Role.
- *
- * The device can advertise, and you can connect it by a central. It
- * acts as a slave when connected.
- *
- * @note A peripheral is a broadcaster.
- */
- PERIPHERAL = 0x01
- };
-
- /**
- * Construct a new instance of role_t.
- *
- * @param value The value of the role_t created.
- */
- connection_role_t(type value) : SafeEnum(value)
- {
- }
-
-#if !defined(DOXYGEN_ONLY)
-
- /**
- * Explicit constructor from a raw value.
- * @param raw_value The role.
- */
- explicit connection_role_t(uint8_t raw_value) : SafeEnum(raw_value)
- {
- }
-
-#endif
-};
-
-/**
- * Enumeration of disconnection reasons that should be transmited to the peer.
- */
-struct local_disconnection_reason_t : SafeEnum<local_disconnection_reason_t, uint8_t> {
- /// enumeration of local_disconnection_reason_t values.
- enum type {
- /**
- * GAP or GATT failed to authenticate the peer.
- */
- AUTHENTICATION_FAILURE = 0x05,
-
- /**
- * Connection terminated by the user.
- */
- USER_TERMINATION = 0x13,
-
- /**
- * Connection termination due to low resources.
- */
- LOW_RESOURCES = 0x14,
-
- /**
- * Connection termination due to power off.
- */
- POWER_OFF = 0x15,
-
- /**
- * Remote feature not supported.
- */
- UNSUPPORTED_REMOTE_FEATURE = 0x1A,
-
- /**
- * Not possible to pai with a unit key.
- */
- PAIRING_WITH_UNIT_KEY_NOT_SUPPORTED = 0x29,
-
- /**
- * Connection parameters were unacceptable.
- */
- UNACCEPTABLE_CONNECTION_PARAMETERS = 0x3B
- };
-
- /**
- * Construct a new instance of disconnection_reason_t.
- *
- * @param value The value of the local_disconnection_reason_t created.
- */
- local_disconnection_reason_t(type value) : SafeEnum(value)
- {
- }
-};
-
-
-/**
- * Enumeration of disconnection reasons received in a disconnection event.
- */
-struct disconnection_reason_t : SafeEnum<disconnection_reason_t, uint8_t> {
- /// enumeration of disconnection_reason_t values.
- enum type {
- /**
- * GAP or GATT failed to authenticate the peer.
- */
- AUTHENTICATION_FAILURE = 0x05,
-
- /**
- * The connection timed out.
- */
- CONNECTION_TIMEOUT = 0x08,
-
- /**
- * Connection terminated by the user.
- */
- REMOTE_USER_TERMINATED_CONNECTION = 0x13,
-
- /**
- * Remote device terminated connection due to low resources.
- */
- REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES = 0x14,
-
- /**
- * Remote device terminated connection due to power off.
- */
- REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF = 0x15,
-
- /**
- * Indicate that the local user or the internal
- * Bluetooth subsystem terminated the connection.
- */
- LOCAL_HOST_TERMINATED_CONNECTION = 0x16,
-
- /**
- * Connection parameters were unacceptable.
- */
- UNACCEPTABLE_CONNECTION_PARAMETERS = 0x3B
- };
-
- /**
- * Construct a new instance of disconnection_reason_t.
- *
- * @param value The value of the disconnection_reason_t created.
- */
- disconnection_reason_t(type value) : SafeEnum(value)
- {
- }
-};
-
-/**
- * Privacy Configuration of the peripheral role.
- *
- * @note This configuration also applies to the broadcaster role configuration.
- */
-struct peripheral_privacy_configuration_t {
- /**
- * Indicates if nonresolvable random address should be used when the
- * peripheral advertises nonconnectable packets.
- *
- * Resolvable random address continues to be used for connectable packets.
- */
- bool use_non_resolvable_random_address;
-
- /**
- * Resolution strategy for initiator resolvable addresses when a
- * connection request is received.
- */
- enum resolution_strategy_t {
- /**
- * Do not resolve the address of the initiator and accept the
- * connection request.
- */
- DO_NOT_RESOLVE,
-
- /**
- * If a bond is present in the secure database and the address
- * resolution fails, then reject the connection request with the error
- * code AUTHENTICATION_FAILLURE.
- */
- REJECT_NON_RESOLVED_ADDRESS,
-
- /**
- * Perform the pairing procedure if the initiator resolvable
- * address failed the resolution process.
- */
- PERFORM_PAIRING_PROCEDURE,
-
- /**
- * Perform the authentication procedure if the initiator resolvable
- * address failed the resolution process.
- */
- PERFORM_AUTHENTICATION_PROCEDURE
- };
-
- MBED_DEPRECATED_SINCE("mbed-os-5.11", "Use resolution_strategy_t instead.")
- typedef resolution_strategy_t ResolutionStrategy;
-
- /**
- * Connection strategy to use when a connection request contains a
- * private resolvable address.
- */
- resolution_strategy_t resolution_strategy;
-};
-
-/**
- * Privacy configuration of the central role.
- *
- * @note This configuration is also used when the local device operates as
- * an observer.
- */
-struct central_privay_configuration_t {
- /**
- * Indicates if nonresolvable random address should be used when the
- * central or observer sends scan request packets.
- *
- * Resolvable random address continues to be used for connection requests.
- */
- bool use_non_resolvable_random_address;
-
-
- /**
- * Resolution strategy of resolvable addresses received in advertising
- * packets.
- */
- enum resolution_strategy_t {
- /**
- * Do not resolve the address received in advertising packets.
- */
- DO_NOT_RESOLVE,
-
- /**
- * Resolve the resolvable addresses in the advertising packet and
- * forward advertising packet to the application independently of
- * the address resolution procedure result.
- */
- RESOLVE_AND_FORWARD,
-
- /**
- * Filter out packets containing a resolvable address that cannot be resolved
- * by this device.
- *
- * @note Filtering is applied if the local device contains at least
- * one bond.
- */
- RESOLVE_AND_FILTER
- };
-
- MBED_DEPRECATED_SINCE("mbed-os-5.11", "Use resolution_strategy_t instead.")
- typedef resolution_strategy_t ResolutionStrategy;
-
- /**
- * Resolution strategy applied to advertising packets received by the
- * local device.
- */
- resolution_strategy_t resolution_strategy;
-};
-
-
-/**
- * @}
- * @}
- */
-
-} // namespace ble
-
-#endif //BLE_GAP_TYPES_H