Diff: nordic/nrf-sdk/s110/ble_hci.h

Revision:

0:eff01767de02

Child:

56:a1071b629aa3

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/nordic/nrf-sdk/s110/ble_hci.h	Wed Mar 26 14:38:17 2014 +0000
@@ -0,0 +1,96 @@
+/*
+  Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+
+  The information contained herein is confidential property of Nordic Semiconductor. The use,
+  copying, transfer or disclosure of such information is prohibited except by express written
+  agreement with Nordic Semiconductor.
+ */
+/**
+  @addtogroup BLE_COMMON 
+  @{
+*/
+
+
+#ifndef BLE_HCI_H__
+#define BLE_HCI_H__ 
+
+/** @defgroup BLE_HCI_STATUS_CODES Bluetooth status codes
+ * @{ */
+
+#define BLE_HCI_STATUS_CODE_SUCCESS                        0x00
+#define BLE_HCI_STATUS_CODE_UNKNOWN_BTLE_COMMAND           0x01
+#define BLE_HCI_STATUS_CODE_UNKNOWN_CONNECTION_IDENTIFIER  0x02 
+/*0x03 Hardware Failure
+0x04 Page Timeout
+*/
+#define BLE_HCI_AUTHENTICATION_FAILURE                     0x05
+#define BLE_HCI_STATUS_CODE_PIN_OR_KEY_MISSING             0x06
+#define BLE_HCI_MEMORY_CAPACITY_EXCEEDED                   0x07
+#define BLE_HCI_CONNECTION_TIMEOUT                         0x08
+/*0x09 Connection Limit Exceeded
+0x0A Synchronous Connection Limit To A Device Exceeded
+0x0B ACL Connection Already Exists*/
+#define BLE_HCI_STATUS_CODE_COMMAND_DISALLOWED             0x0C
+/*0x0D Connection Rejected due to Limited Resources
+0x0E Connection Rejected Due To Security Reasons
+0x0F Connection Rejected due to Unacceptable BD_ADDR
+0x10 Connection Accept Timeout Exceeded
+0x11 Unsupported Feature or Parameter Value*/
+#define BLE_HCI_STATUS_CODE_INVALID_BTLE_COMMAND_PARAMETERS 0x12
+#define BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION           0x13
+#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES 0x14
+#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF     0x15
+#define BLE_HCI_LOCAL_HOST_TERMINATED_CONNECTION            0x16
+/*
+0x17 Repeated Attempts
+0x18 Pairing Not Allowed
+0x19 Unknown LMP PDU
+*/
+#define BLE_HCI_UNSUPPORTED_REMOTE_FEATURE 0x1A
+/*
+0x1B SCO Offset Rejected
+0x1C SCO Interval Rejected
+0x1D SCO Air Mode Rejected*/
+#define BLE_HCI_STATUS_CODE_INVALID_LMP_PARAMETERS     0x1E
+#define BLE_HCI_STATUS_CODE_UNSPECIFIED_ERROR          0x1F
+/*0x20 Unsupported LMP Parameter Value
+0x21 Role Change Not Allowed
+*/
+#define BLE_HCI_STATUS_CODE_LMP_RESPONSE_TIMEOUT       0x22
+/*0x23 LMP Error Transaction Collision*/
+#define BLE_HCI_STATUS_CODE_LMP_PDU_NOT_ALLOWED        0x24
+/*0x25 Encryption Mode Not Acceptable
+0x26 Link Key Can Not be Changed
+0x27 Requested QoS Not Supported
+*/
+#define BLE_HCI_INSTANT_PASSED                         0x28
+#define BLE_HCI_PAIRING_WITH_UNIT_KEY_UNSUPPORTED      0x29
+#define BLE_HCI_DIFFERENT_TRANSACTION_COLLISION        0x2A
+/*
+0x2B Reserved
+0x2C QoS Unacceptable Parameter
+0x2D QoS Rejected
+0x2E Channel Classification Not Supported
+0x2F Insufficient Security
+0x30 Parameter Out Of Mandatory Range
+0x31 Reserved
+0x32 Role Switch Pending
+0x33 Reserved
+0x34 Reserved Slot Violation
+0x35 Role Switch Failed
+0x36 Extended Inquiry Response Too Large
+0x37 Secure Simple Pairing Not Supported By Host.
+0x38 Host Busy - Pairing
+0x39 Connection Rejected due to No Suitable Channel Found*/
+#define BLE_HCI_CONTROLLER_BUSY                        0x3A
+#define BLE_HCI_CONN_INTERVAL_UNACCEPTABLE             0x3B
+#define BLE_HCI_DIRECTED_ADVERTISER_TIMEOUT            0x3C
+#define BLE_HCI_CONN_TERMINATED_DUE_TO_MIC_FAILURE     0x3D
+#define BLE_HCI_CONN_FAILED_TO_BE_ESTABLISHED          0x3E
+
+/** @} */
+
+
+#endif // BLE_HCI_H__
+
+/** @} */