A project similar to http://mbed.org/users/lhiggs/code/UM6_IMU_AHRS_2012/, where I'm trying to log data from a UM6 (CH Robotics orientation sensor) and a GPS transceiver to an sd card. I've adapted LHiggs code to include ModGPS. For sum reason a soon as I pick up a gps signal the UM6 data freezes i.e. the time and gps signals continue to print out but the UM6 signals fixes on a single value.
Dependencies: MODGPS MODSERIAL SDFileSystem mbed
main.cpp
- Committer:
- njewin
- Date:
- 2013-05-30
- Revision:
- 9:7dcfa24d5e7a
- Parent:
- 8:0ce247da6370
- Child:
- 10:d96e068f3595
File content as of revision 9:7dcfa24d5e7a:
#include "mbed.h" #include "SDFileSystem.h" // SD file system header from handbook/cookbook offical mbed library #include "MODSERIAL.h" #include "UM6_usart.h" // UM6 USART HEADER #include "UM6_config.h" // UM6 CONFIG HEADER //------------ system and interface setup ----------------------------// MODSERIAL pc(USBTX, USBRX); // sets up serial connection to pc terminal //------------ Hardware setup ----------------------------------------// DigitalOut pc_led(LED1); // LED1 = PC SERIAL DigitalOut uart_led(LED2); // LED2 = UM6 SERIAL DigitalOut log_led(LED3); // debug LED DigitalOut debug_led(LED4); // debug LED DigitalIn enable(p10); // enable logging pin DigitalOut sync(p11); // sychronization (with CAN logger) pin SDFileSystem sd(p5, p6, p7, p8, "sd"); // the pinout on the mbed Cool Components workshop board // interupt function for processing uart messages --------------------// void rxCallback(MODSERIAL_IRQ_INFO *q) { if (um6_uart.rxBufferGetCount() >= MAX_PACKET_DATA) { uart_led = !uart_led; // Lights LED when uart RxBuff has > 40 bytes Process_um6_packet(); } } //------------ LogData interrupt function ----------------------------// int flag=0; void LogData() { flag=1; //interrupt sets flag that causes variables to be logged } //============= Main Program =========================================// int main() { pc.baud(115200); // baud rate to pc interface um6_uart.baud(115200); // baud rate to um6 interface Ticker tick; Timer t; //---- call interrupt functions --------------------------// um6_uart.attach(&rxCallback, MODSERIAL::RxIrq); // attach interupt function to uart tick.attach(&LogData, 0.5); // attaches LogData function to 'tick' ticker interrupt every 0.5s t.start(); // start logging time //---------- setup sd card directory------------------------------// int FileNo = 0; mkdir("/sd/log_data", 0777); //---- main while loop -------------------------------------------// while(1) { //---- Setup file on SD card ----------------------------// printf("Opening sd card\n"); char buffer[50]; sprintf(buffer, "/sd/log_data/%i.csv", FileNo); //**************************************************** // This is necessary for card to work when reconnected // Initialise disk sd.disk_initialize(); //**************************************************** // Open a file for write FILE *fp = fopen(buffer, "w"); if(fp == NULL) { error("Could not open file for write\n"); } //--- print TEST signals to file, header //fprintf(fp,"time(s),Yaw(deg),Accel(m/s2),GPS Speed(m/s) \r"); //--- print ALL signals to file, header fprintf(fp, "time(s),Yaw(deg),Roll(deg),Pitch(deg),GyroX(deg/s),GyroY(deg/s),GyroZ(deg/s),AccelX(g),AccelY(g),AccelZ(g),GPScourse(deg),GPSspeed(m/s),Latitude(deg),Longitude(deg) \r"); // sends header to file while (!pc.readable()) { if(flag==1) { log_led=1; // turns on LED3 to indicate logging float time=t.read(); float Yaw=data.Yaw; float Roll=data.Roll; float Pitch=data.Pitch; float GyroX=data.Gyro_Proc_X; float GyroY=data.Gyro_Proc_Y; float GyroZ=data.Gyro_Proc_Z; float AccelX=data.Accel_Proc_X; float AccelY=data.Accel_Proc_Y; float AccelZ=data.Accel_Proc_Z; float GPSlong=data.GPS_long; // currently not reading GPS longitude correctly float GPSlat=data.GPS_lat; // currently not reading GPS latitude correctly float GPScourse=data.GPS_course; float GPSspeed=data.GPS_speed; int32_t GPSlatR=data.GPS_lat_raw; //----- print TEST signals----------------------------// // fprintf(fp,"%.3f,%.2f,%.4f,%.2f \r",time,Yaw,AccelX,GPSspeed); pc.printf("time %.3f,Yaw %f,Accel %f, Speed %f, Lat %f, Long %f, LatR %d \n",time,Yaw,AccelX,GPSspeed,GPSlat,GPSlong,GPSlatR); //pc.printf("time %.3f,Yaw %f,Accel %f, Speed %f \n",time,Yaw,AccelX,GPSspeed); // pc.printf("time %f,LongIn 0x%08X, LongOut %f\n",time,GPSlong,*(int *)&GPSlong); //----- print ALL signals to file --------------------// fprintf(fp, "%3.3f, %3.1f,%3.1f,%3.1f, %3.2f,%3.2f,%3.2f, %3.4f,%3.4f,%3.4f, %3.1f,%3.2f,%d,%f\r",time,Yaw,Roll,Pitch,GyroX,GyroY,GyroZ,AccelX,AccelY,AccelZ,GPScourse,GPSspeed,GPSlat,GPSlong); flag=0; // reset LogData interrupt flag pc_led = !pc_led; // Lights LED1 when transmitting to PC screen } // end if(flag=1) loop if(enable==0) { break; // breaks while loop if enable switched off } } // end while(!pc.readable()) loop pc.printf(" Done. \n"); // prints 'done when logging is finished/enable switched off log_led=0; // turns off LED logging is finished/enable switched off wait(0.5); // debug wait for pc.printf fclose(fp); // closes log file pc.getc(); // Clear character from buffer while (!pc.readable()) { // Wait for a key press to restart logging }; pc.getc(); // Clear character from buffer FileNo++; // Increment file number } // end while(1) loop } // end main() program /* DEUBBING NOTES opening a file BEFORE calling interrupts OK opening a file and print to it BEFORE calling interrupts NOT OK (stops rest of program) open a (local) file and print to it AFTER calling interrupts NOT OK (stops rest of program) open a (sd) file and print to it AFTER calling interrupts OK */