Clone
Dependents: SignalProcessLab DigitalSignalAlgorithm_Lab DigitalSignal_Lab
Diff: Drivers/BSP/Components/Common/gyro.h
- Revision:
- 0:fc80425b677a
diff -r 000000000000 -r fc80425b677a Drivers/BSP/Components/Common/gyro.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Drivers/BSP/Components/Common/gyro.h Mon Aug 26 16:33:09 2019 +0000 @@ -0,0 +1,145 @@ +/** + ****************************************************************************** + * @file gyro.h + * @author MCD Application Team + * @version V4.0.1 + * @date 21-July-2015 + * @brief This header file contains the functions prototypes for the gyroscope driver. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __GYRO_H +#define __GYRO_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include <stdint.h> + +/** @addtogroup BSP + * @{ + */ + +/** @addtogroup Components + * @{ + */ + +/** @addtogroup GYRO + * @{ + */ + +/** @defgroup GYRO_Exported_Types + * @{ + */ + +/** @defgroup GYRO_Driver_structure Gyroscope Driver structure + * @{ + */ +typedef struct +{ + void (*Init)(uint16_t); + void (*DeInit)(void); + uint8_t (*ReadID)(void); + void (*Reset)(void); + void (*LowPower)(uint16_t); + void (*ConfigIT)(uint16_t); + void (*EnableIT)(uint8_t); + void (*DisableIT)(uint8_t); + uint8_t (*ITStatus)(uint16_t, uint16_t); + void (*ClearIT)(uint16_t, uint16_t); + void (*FilterConfig)(uint8_t); + void (*FilterCmd)(uint8_t); + void (*GetXYZ)(float *); +}GYRO_DrvTypeDef; +/** + * @} + */ + +/** @defgroup GYRO_Config_structure Gyroscope Configuration structure + * @{ + */ + +typedef struct +{ + uint8_t Power_Mode; /* Power-down/Sleep/Normal Mode */ + uint8_t Output_DataRate; /* OUT data rate */ + uint8_t Axes_Enable; /* Axes enable */ + uint8_t Band_Width; /* Bandwidth selection */ + uint8_t BlockData_Update; /* Block Data Update */ + uint8_t Endianness; /* Endian Data selection */ + uint8_t Full_Scale; /* Full Scale selection */ +}GYRO_InitTypeDef; + +/* GYRO High Pass Filter struct */ +typedef struct +{ + uint8_t HighPassFilter_Mode_Selection; /* Internal filter mode */ + uint8_t HighPassFilter_CutOff_Frequency; /* High pass filter cut-off frequency */ +}GYRO_FilterConfigTypeDef; + +/*GYRO Interrupt struct */ +typedef struct +{ + uint8_t Latch_Request; /* Latch interrupt request into CLICK_SRC register */ + uint8_t Interrupt_Axes; /* X, Y, Z Axes Interrupts */ + uint8_t Interrupt_ActiveEdge; /* Interrupt Active edge */ +}GYRO_InterruptConfigTypeDef; + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __GYRO_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/