Revision 1:a60695b04510, committed 2017-09-26

Comitter:

nghiajenius_dev

Date:

Tue Sep 26 07:59:09 2017 +0000

Parent:

0:c315c3fd48fb

Commit message:

change to uart0

Changed in this revision

diff -r c315c3fd48fb -r a60695b04510 MSS.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/MSS.h	Tue Sep 26 07:59:09 2017 +0000
@@ -0,0 +1,230 @@
+#ifndef _MSS_H_
+#define _MSS_H_
+
+#if defined (TARGET_KL25Z)
+/* I2C */
+#define PIN_SCL  PTE1
+#define PIN_SDA  PTE0
+/* SPI */
+#define PIN_SCK  PTD1
+#define PIN_MISO PTD3
+#define PIN_MOSI PTD2
+#define PIN_CS0  PTD0
+/* Interrupt */
+#define PIN_INT0 PTD5
+#define PIN_INT1 PTA13
+#define PIN_INT2 PTC9  /* This pin does not support interrupt */
+#define PIN_INT3 PTC8  /* This pin does not support interrupt */
+#define PIN_INT4 PTA5
+#define PIN_INT5 PTA4
+/* Analog Input */
+#define PIN_AN0  PTB0
+#define PIN_AN1  PTB1
+#define PIN_AN2  PTB2
+#define PIN_AN3  PTB3
+#define PIN_AN4  PTC2
+#define PIN_AN5  PTC1
+#define BOARD_NAME "FRDM-KL25Z"
+
+#elif defined (TARGET_KL46Z)
+/* I2C */
+#define PIN_SCL  PTE1
+#define PIN_SDA  PTE0
+/* SPI */
+#define PIN_SCK  PTD5
+#define PIN_MISO PTD7
+#define PIN_MOSI PTD6
+#define PIN_CS0  PTD4
+/* Interrupt */
+#define PIN_INT0 PTD2
+#define PIN_INT1 PTA13
+#define PIN_INT2 PTC9  /* This pin does not support interrupt */
+#define PIN_INT3 PTC8  /* This pin does not support interrupt */
+#define PIN_INT4 PTA5
+#define PIN_INT5 PTA4
+/* Analog Input */
+#define PIN_AN0  PTB0
+#define PIN_AN1  PTB1
+#define PIN_AN2  PTB2
+#define PIN_AN3  PTB3
+#define PIN_AN4  PTC2
+#define PIN_AN5  PTC1
+#define BOARD_NAME "FRDM-KL46Z"
+
+#elif defined (TARGET_K64F)
+/* I2C */
+#define PIN_SCL  PTE24
+#define PIN_SDA  PTE25
+/* SPI */
+#define PIN_SCK  PTD1
+#define PIN_MISO PTD3
+#define PIN_MOSI PTD2
+#define PIN_CS0  PTD0
+/* Interrupt */
+#define PIN_INT0 PTC4
+#define PIN_INT1 PTA0
+#define PIN_INT2 PTC3
+#define PIN_INT3 PTC2
+#define PIN_INT4 PTA2
+#define PIN_INT5 PTB23
+/* Analog Input */
+#define PIN_AN0  PTB2
+#define PIN_AN1  PTB3
+#define PIN_AN2  PTB10
+#define PIN_AN3  PTB11
+#define PIN_AN4  PTC11
+#define PIN_AN5  PTC10
+#define BOARD_NAME "FRDM-K64Z"
+
+/**
+ * NOTE: On FRDM-K22F
+ * Both I2C and UART are assigned to 
+ * the same pins PTE1/PTE0.
+ * So MSS does not work as is.
+ */
+#elif defined (TARGET_K22F) 
+/* I2C */
+#define PIN_SCL  PTE1
+#define PIN_SDA  PTE0
+/* SPI */
+#define PIN_SCK  PTD5
+#define PIN_MISO PTD7
+#define PIN_MOSI PTD6
+#define PIN_CS0  PTD4
+/* Interrupt */
+#define PIN_INT0 PTA1
+#define PIN_INT1 PTB19
+#define PIN_INT2 PTC6
+#define PIN_INT3 PTC3
+#define PIN_INT4 PTB18
+#define PIN_INT5 PTA4
+/* Analog Input */
+#define PIN_AN0  PTB0
+#define PIN_AN1  PTB1
+#define PIN_AN2  PTC1
+#define PIN_AN3  PTC2
+#define PIN_AN4  PTB3
+#define PIN_AN5  PTB2
+#define BOARD_NAME "FRDM-K22F"
+
+#elif defined (TARGET_KL05Z)
+/* I2C */
+#define PIN_SCL  PTB3
+#define PIN_SDA  PTB4
+/* SPI */
+#define PIN_SCK  PTB0
+#define PIN_MISO PTA6
+#define PIN_MOSI PTA7
+#define PIN_CS0  PTA5
+/* Interrupt */
+#define PIN_INT0 PTB11
+#define PIN_INT1 PTB10
+#define PIN_INT2 PTB7
+#define PIN_INT3 PTB6
+#define PIN_INT4 PTA12
+#define PIN_INT5 PTA10
+/* Analog Input */
+#define PIN_AN0  PTB8
+#define PIN_AN1  PTB9
+#define PIN_AN2  PTA8
+#define PIN_AN3  PTA0
+#define PIN_AN4  PTA9
+#define PIN_AN5  PTB13
+#define BOARD_NAME "FRDM-KL05Z"
+
+#elif defined (TARGET_F411RE)
+/* I2C */
+#define PIN_SCL  PB_8
+#define PIN_SDA  PB_9
+/* SPI */
+#define PIN_SCK  PA_5
+#define PIN_MISO PA_6
+#define PIN_MOSI PA_7
+#define PIN_CS0  PB_6
+/* Interrupt */
+#define PIN_INT0 PC_7
+#define PIN_INT1 PA_9
+#define PIN_INT2 PA_8
+#define PIN_INT3 PB_10
+#define PIN_INT4 PB_4
+#define PIN_INT5 PB_5
+/* Analog In */
+#define PIN_AN0  PA_0
+#define PIN_AN1  PA_1
+#define PIN_AN2  PA_4
+#define PIN_AN3  PB_0
+#define PIN_AN4  PC_1
+#define PIN_AN5  PC_0
+#define BOARD_NAME "NUCLEO-F411RE"
+
+#elif defined (TARGET_LPC812)
+/* I2C */
+#define PIN_SCL  P0_11
+#define PIN_SDA  P0_10
+/* SPI */
+#define PIN_SCK  P0_12
+#define PIN_MISO P0_15
+#define PIN_MOSI P0_14
+#define PIN_CS0  P0_13
+/* Interrupt */
+#define PIN_INT0 P0_16
+#define PIN_INT1 P0_17
+#define PIN_INT2 P0_7
+#define PIN_INT3 XP_4
+#define PIN_INT4 XP_5
+#define PIN_INT5 P0_9
+/* Analog In */
+#define PIN_AN0  A0
+#define PIN_AN1  A1
+#define PIN_AN2  A2
+#define PIN_AN3  A3
+#define PIN_AN4  A4
+#define PIN_AN5  A5
+/* MSS on board LEDs */
+#define LED_D1   P0_12
+#define LED_D2   P0_15
+#define LED_D3   P0_14
+#define LED_D4   P0_13
+#define LED_D5   P0_8
+#define LED_D6   P0_6
+#define LED_D7   P0_4
+#define LED_D8   P0_0
+#define BOARD_NAME "NXP_LPC800MAX"
+
+#else
+// #error TARGET NOT DEFINED
+/* I2C */
+#define PIN_SCL  P1_2
+#define PIN_SDA  P1_3
+///* SPI */
+//#define PIN_SCK  D13
+//#define PIN_MISO D12
+//#define PIN_MOSI D11
+//#define PIN_CS0  D10
+///* Interrupt */
+//#define PIN_INT0 D9
+//#define PIN_INT1 D8
+//#define PIN_INT2 D7
+//#define PIN_INT3 D6
+//#define PIN_INT4 D5
+//#define PIN_INT5 D4
+///* Analog In */
+//#define PIN_AN0  A0
+//#define PIN_AN1  A1
+//#define PIN_AN2  A2
+//#define PIN_AN3  A3
+//#define PIN_AN4  A4
+//#define PIN_AN5  A5
+///* MSS on board LEDs */
+//#define LED_D1   D13
+//#define LED_D2   D12
+//#define LED_D3   D11
+//#define LED_D4   D10
+//#define LED_D5   D3
+//#define LED_D6   D2
+//#define LED_D7   D1
+//#define LED_D8   D0
+
+#endif
+
+#endif /* _MSS_H_ */
\ No newline at end of file