ATT_SMS_System for home security system
Dependencies: FXOS8700CQ MODSERIAL mbed-rtos mbed
Fork of ATT_Cellular_IOT_Button by
Diff: config_me.h
- Revision:
- 73:4a7aa34332b9
- Parent:
- 72:0afdd141157c
diff -r 0afdd141157c -r 4a7aa34332b9 config_me.h --- a/config_me.h Fri Aug 12 21:47:22 2016 +0000 +++ b/config_me.h Mon Apr 30 17:14:34 2018 +0000 @@ -9,16 +9,25 @@ // This is the server's base server name. Example "www.google.com" // Note that when you Fork a FLOW, it will typically assign either // "run-east.att.io" or "run-west.att.io", so be sure to check this. -static const char * MY_SERVER_NAME = "run-west.att.io"; // CHECK ME, might be different + +//static const char * MY_SERVER_NAME = "runm-east.att.io"; // CHECK ME, might be different +static const char * MY_SERVER_NAME = "runm-west.att.io"; // CHECK ME, might be different //This is for normal HTTP. If you want to use TCP to a specific port, change that here: -static const char * MY_PORT_STR = "0000"; // CHANGE ME + +//static const char * MY_PORT_STR = "32485"; // CHANGE ME +static const char * MY_PORT_STR = "32480"; // CHANGE ME // Only used if you program void GenerateModemString() to use them and send HTTP + // These are FLOW fields from the Endpoints tab: -#define FLOW_BASE_PATH "/..../in/flow" // CHANGE ME + +//#define FLOW_BASE_PATH "/3ab29aa47262a/2297fbb55e65/968eb2cb9b84da9/in/flow" // CHANGE ME +#define FLOW_BASE_PATH "/b89259fadcfa9/8c7be95398c0/18a1705d518fb39/in/flow" // CHANGE ME + #define FLOW_INPUT_NAME "/buttons" -// The full URL will be "http://"+MY_SERVER_NAME+":"+MY_PORT_STR+FLOW_PATH_PATH+FLOW_INPUT_NAME + +// The full URL will be "http://"+MY_SERVER_NAME+":"+MY_PORT_STR+FLOW_BASE_PATH+FLOW_INPUT_NAME // Unless you want to use a different protocol, this field should be left as is: #define FLOW_URL_TYPE " HTTP/1.1\r\nHost: "