Revision 28:45e8aa1fc420, committed 2015-07-12

Comitter:

nameless129

Date:

Sun Jul 12 03:16:20 2015 +0000

Parent:

27:26491d710e72

Commit message:

first commit;

Changed in this revision

--- a/ili9328.cpp	Mon Jul 22 01:48:06 2013 +0000
+++ b/ili9328.cpp	Sun Jul 12 03:16:20 2015 +0000
@@ -94,66 +94,56 @@
             entryMod |= 0x1000;
             break;
     }
-    
-    WriteCmdData( 0xE5, 0x78F0 ); // set SRAM internal timing
-    WriteCmdData( 0x01, drivOut ); // set Driver Output Control
-    WriteCmdData( 0x02, 0x0200 ); // set 1 line inversion
-    WriteCmdData( 0x03, entryMod ); // set GRAM write direction and BGR=1.
-    WriteCmdData( 0x04, 0x0000 ); // Resize register
-    WriteCmdData( 0x08, 0x0207 ); // set the back porch and front porch
-    WriteCmdData( 0x09, 0x0000 ); // set non-display area refresh cycle ISC[3:0]
-    WriteCmdData( 0x0A, 0x0000 ); // FMARK function
-    WriteCmdData( 0x0C, 0x0000 ); // RGB interface setting
-    WriteCmdData( 0x0D, 0x0000 ); // Frame marker Position
-    WriteCmdData( 0x0F, 0x0000 ); // RGB interface polarity
+
+    WriteCmdData( ILI932X_DRIV_OUT_CTRL, drivOut ); // set Driver Output Control
+    WriteCmdData( ILI932X_DRIV_WAV_CTRL, 0x0700 ); // set 1 line inversion
+    WriteCmdData( ILI932X_ENTRY_MOD, entryMod ); // set GRAM write direction and BGR=1.
+    WriteCmdData( ILI932X_RESIZE_CTRL, 0x0000 ); // Resize register
+    WriteCmdData( ILI932X_DISP_CTRL2, 0x0202 ); // set the back porch and front porch
+    WriteCmdData( ILI932X_DISP_CTRL3, 0x0000 ); // set non-display area refresh cycle ISC[3:0]
+    WriteCmdData( ILI932X_DISP_CTRL4, 0x0000 ); // FMARK function
+    WriteCmdData( ILI932X_RGB_DISP_IF_CTRL1, 0x0000 ); // RGB interface setting
+    WriteCmdData( ILI932X_FRM_MARKER_POS, 0x0000 ); // Frame marker Position
+    WriteCmdData( ILI932X_RGB_DISP_IF_CTRL2, 0x0000 ); // RGB interface polarity
     // ----------- Power On sequence ----------- //
-    WriteCmdData( 0x10, 0x0000 ); // SAP, BT[3:0], AP, DSTB, SLP, STB
-    WriteCmdData( 0x11, 0x0007 ); // DC1[2:0], DC0[2:0], VC[2:0]
-    WriteCmdData( 0x12, 0x0000 ); // VREG1OUT voltage
-    WriteCmdData( 0x13, 0x0000 ); // VDV[4:0] for VCOM amplitude
-    WriteCmdData( 0x07, 0x0001 );
+    WriteCmdData( ILI932X_POW_CTRL1, 0x0000 ); // SAP, BT[3:0], AP, DSTB, SLP, STB
+    WriteCmdData( ILI932X_POW_CTRL2, 0x0007 ); // DC1[2:0], DC0[2:0], VC[2:0]
+    WriteCmdData( ILI932X_POW_CTRL3, 0x0000 ); // VREG1OUT voltage
+    WriteCmdData( ILI932X_POW_CTRL4, 0x0000 ); // VDV[4:0] for VCOM amplitude
     wait_ms( 200 ); // Dis-charge capacitor power voltage
-    WriteCmdData( 0x10, 0x1690 ); // SAP, BT[3:0], AP, DSTB, SLP, STB
-    WriteCmdData( 0x11, 0x0227 ); // Set DC1[2:0], DC0[2:0], VC[2:0]
+    WriteCmdData( ILI932X_POW_CTRL1, 0x1690 ); // SAP, BT[3:0], AP, DSTB, SLP, STB
+    WriteCmdData( ILI932X_POW_CTRL2, 0x0227 ); // Set DC1[2:0], DC0[2:0], VC[2:0]
     wait_ms( 50 ); // Delay 50ms
-    WriteCmdData( 0x12, 0x000D ); // 0012
+    WriteCmdData( ILI932X_POW_CTRL3, 0x001A ); // 0012
     wait_ms( 50 ); // Delay 50ms
-    WriteCmdData( 0x13, 0x1200 ); // VDV[4:0] for VCOM amplitude
-    WriteCmdData( 0x29, 0x000A ); // 04  VCM[5:0] for VCOMH
-    WriteCmdData( 0x2B, 0x000D ); // Set Frame Rate
+    WriteCmdData( ILI932X_POW_CTRL4, 0x1800 ); // VDV[4:0] for VCOM amplitude
+    WriteCmdData( ILI932X_POW_CTRL7, 0x002A ); // 04  VCM[5:0] for VCOMH
     wait_ms( 50 ); // Delay 50ms
-    WriteCmdData( 0x20, 0x0000 ); // GRAM horizontal Address
-    WriteCmdData( 0x21, 0x0000 ); // GRAM Vertical Address
+    WriteCmdData( ILI932X_GRAM_HOR_AD, 0x0000 ); // GRAM horizontal Address
+    WriteCmdData( ILI932X_GRAM_VER_AD, 0x0000 ); // GRAM Vertical Address
     // ----------- Adjust the Gamma Curve ----------//
-    WriteCmdData( 0x30, 0x0000 );
-    WriteCmdData( 0x31, 0x0404 );
-    WriteCmdData( 0x32, 0x0003 );
-    WriteCmdData( 0x35, 0x0405 );
-    WriteCmdData( 0x36, 0x0808 );
-    WriteCmdData( 0x37, 0x0407 );
-    WriteCmdData( 0x38, 0x0303 );
-    WriteCmdData( 0x39, 0x0707 );
-    WriteCmdData( 0x3C, 0x0504 );
-    WriteCmdData( 0x3D, 0x0808 );
+    WriteCmdData( ILI932X_GAMMA_CTRL1, 0x0000 );
+    WriteCmdData( ILI932X_GAMMA_CTRL2, 0x0000 );
+    WriteCmdData( ILI932X_GAMMA_CTRL3, 0x0000 );
+    WriteCmdData( ILI932X_GAMMA_CTRL4, 0x0206 );
+    WriteCmdData( ILI932X_GAMMA_CTRL5, 0x0808 );
+    WriteCmdData( ILI932X_GAMMA_CTRL6, 0x0007 );
+    WriteCmdData( ILI932X_GAMMA_CTRL7, 0x0201 );
+    WriteCmdData( ILI932X_GAMMA_CTRL8, 0x0000 );
+    WriteCmdData( ILI932X_GAMMA_CTRL9, 0x0000 );
+    WriteCmdData( ILI932X_GAMMA_CTRL10, 0x0000 );
     //------------------ Set GRAM area ---------------//
-    WriteCmdData( 0x50, 0x0000 ); // Horizontal GRAM Start Address
-    WriteCmdData( 0x51, 0x00EF ); // Horizontal GRAM End Address
-    WriteCmdData( 0x52, 0x0000 ); // Vertical GRAM Start Address
-    WriteCmdData( 0x53, 0x013F ); // Vertical GRAM Start Address
-    WriteCmdData( 0x60, gateScan ); // Gate Scan Line (0xA700)
-    WriteCmdData( 0x61, 0x0000 ); // NDL,VLE, REV
-    WriteCmdData( 0x6A, 0x0000 ); // set scrolling line
-    //-------------- Partial Display Control ---------//
-    WriteCmdData( 0x80, 0x0000 );
-    WriteCmdData( 0x81, 0x0000 );
-    WriteCmdData( 0x82, 0x0000 );
-    WriteCmdData( 0x83, 0x0000 );
-    WriteCmdData( 0x84, 0x0000 );
-    WriteCmdData( 0x85, 0x0000 );
+    WriteCmdData( ILI932X_HOR_END_AD, 0x00EF ); // Horizontal GRAM End Address
+    WriteCmdData( ILI932X_VER_START_AD, 0x0000 ); // Vertical GRAM Start Address
+    WriteCmdData( ILI932X_VER_END_AD, 0x013F ); // Vertical GRAM Start Address
+    WriteCmdData( ILI932X_GATE_SCAN_CTRL1, gateScan ); // Gate Scan Line (0xA700)
+    WriteCmdData( ILI932X_GATE_SCAN_CTRL2, 0x0003 ); // NDL,VLE, REV
+    WriteCmdData( ILI932X_GATE_SCAN_CTRL3, 0x0000 ); // set scrolling line
     //-------------- Panel Control -------------------//
-    WriteCmdData( 0x90, 0x0010 ); 
-    WriteCmdData( 0x92, 0x0000 );
-    WriteCmdData( 0x07, 0x0133 ); // 262K color and display ON
+    WriteCmdData( ILI932X_PANEL_IF_CTRL1, 0x0010 ); 
+    WriteCmdData( ILI932X_PANEL_IF_CTRL2, 0x0000 );
+    WriteCmdData( ILI932X_PANEL_IF_CTRL4, 0X1100 );
+    WriteCmdData( ILI932X_DISP_CTRL1, 0x0133 ); // 262K color and display ON
     
     Deactivate();
 }
@@ -176,17 +166,22 @@
     Deactivate();
 }
 
+//fix to 8bit mode
 void ILI9328_LCD::WriteCmd( unsigned short cmd )
 {
     _lcd_pin_rs = LOW;
+    _lcd_port->write( 0 );
+    pulseLow( _lcd_pin_wr );
     _lcd_port->write( cmd );
     pulseLow( _lcd_pin_wr );
 }
-
+//fix to 8bit mode
 void ILI9328_LCD::WriteData( unsigned short data )
 {
     _lcd_pin_rs = HIGH;
-    _lcd_port->write( data );
+    _lcd_port->write( data>>8 );
+    pulseLow( _lcd_pin_wr );
+    _lcd_port->write( data&0xff );
     pulseLow( _lcd_pin_wr );
 }
 

--- a/ili9328.h	Mon Jul 22 01:48:06 2013 +0000
+++ b/ili9328.h	Sun Jul 12 03:16:20 2015 +0000
@@ -181,6 +181,52 @@
     DigitalOut* _lcd_pin_rd;
 };
 
+#define ILI932X_DRIV_OUT_CTRL      0x01
+#define ILI932X_DRIV_WAV_CTRL      0x02
+#define ILI932X_ENTRY_MOD          0x03
+#define ILI932X_RESIZE_CTRL        0x04
+#define ILI932X_DISP_CTRL1         0x07
+#define ILI932X_DISP_CTRL2         0x08
+#define ILI932X_DISP_CTRL3         0x09
+#define ILI932X_DISP_CTRL4         0x0A
+#define ILI932X_RGB_DISP_IF_CTRL1  0x0C
+#define ILI932X_FRM_MARKER_POS     0x0D
+#define ILI932X_RGB_DISP_IF_CTRL2  0x0F
+#define ILI932X_POW_CTRL1          0x10
+#define ILI932X_POW_CTRL2          0x11
+#define ILI932X_POW_CTRL3          0x12
+#define ILI932X_POW_CTRL4          0x13
+#define ILI932X_GRAM_HOR_AD        0x20
+#define ILI932X_GRAM_VER_AD        0x21
+#define ILI932X_RW_GRAM            0x22
+#define ILI932X_POW_CTRL7          0x29
+#define ILI932X_FRM_RATE_COL_CTRL  0x2B
+#define ILI932X_GAMMA_CTRL1        0x30
+#define ILI932X_GAMMA_CTRL2        0x31
+#define ILI932X_GAMMA_CTRL3        0x32
+#define ILI932X_GAMMA_CTRL4        0x35
+#define ILI932X_GAMMA_CTRL5        0x36
+#define ILI932X_GAMMA_CTRL6        0x37
+#define ILI932X_GAMMA_CTRL7        0x38
+#define ILI932X_GAMMA_CTRL8        0x39
+#define ILI932X_GAMMA_CTRL9        0x3C
+#define ILI932X_GAMMA_CTRL10       0x3D
+#define ILI932X_HOR_END_AD         0x51
+#define ILI932X_VER_START_AD       0x52
+#define ILI932X_VER_END_AD         0x53
+#define ILI932X_GATE_SCAN_CTRL1    0x60
+#define ILI932X_GATE_SCAN_CTRL2    0x61
+#define ILI932X_GATE_SCAN_CTRL3    0x6A
+#define ILI932X_PART_IMG1_DISP_POS 0x80
+#define ILI932X_PART_IMG1_START_AD 0x81
+#define ILI932X_PART_IMG1_END_AD   0x82
+#define ILI932X_PART_IMG2_DISP_POS 0x83
+#define ILI932X_PART_IMG2_START_AD 0x84
+#define ILI932X_PART_IMG2_END_AD   0x85
+#define ILI932X_PANEL_IF_CTRL1     0x90
+#define ILI932X_PANEL_IF_CTRL2     0x92
+#define ILI932X_PANEL_IF_CTRL4     0x95
+
 #ifdef __cplusplus
 }
 #endif

--- a/lcd_base.h	Mon Jul 22 01:48:06 2013 +0000
+++ b/lcd_base.h	Sun Jul 12 03:16:20 2015 +0000
@@ -514,7 +514,7 @@
      * \param color The color of the pixel.
      * \param mode The depth (palette) of the color.
      */
-    virtual void SetPixelColor( unsigned int color, colordepth_t mode = RGB24 ) = 0;
+    virtual void SetPixelColor( unsigned int color, colordepth_t mode = RGB16 ) = 0;
     
     /** Draws a horizontal line.
      *