File content as of revision 0:84e23a19e37d:

#include "stm32l1xx.h"
#include "stm32l1xx_flash.h"
#include "stm32l1xx_rcc.h"
#include "ST_L152_32MHZ.h"

// set cpu clock to 32MHz



L152_init32::L152_init32(unsigned int external){
    clk_err = setup_clock_32MHZ(external);
    }

#define PLL_STARTUP_TIMEOUT 0x5000

int L152_init32::setup_clock_32MHZ(int external)
{
    uint32_t PLLStartUpCounter = 0,PLLStatus = 0,error;

    if(external == 0) {                                               // internal Oscillator
        RCC_PLLConfig(RCC_PLLSource_HSI,RCC_PLLMul_6,RCC_PLLDiv_3);   // setup pll to 96MHz to use USB
    } else {
        RCC_HSEConfig(RCC_HSE_ON);                                    // start external crystal osc.
        error = RCC_WaitForHSEStartUp();
        if(error == ERROR ) { // no external crystal
            return(0);
        }
        RCC_PLLConfig(RCC_PLLSource_HSE,RCC_PLLMul_12,RCC_PLLDiv_3);   // setup pll to 96MHz to use USB
    }
    RCC_PLLCmd(ENABLE);                                                // switch on pll
    do {
        PLLStatus = RCC->CR & RCC_CR_PLLRDY;
    } while((PLLStatus == 0) && (PLLStartUpCounter < PLL_STARTUP_TIMEOUT)); // wait for pll
    if(PLLStatus == 0) {
        return(0);
    }
    FLASH_SetLatency(FLASH_Latency_1);
    FLASH_PrefetchBufferCmd(ENABLE);
    FLASH_ReadAccess64Cmd(ENABLE);
    RCC_HCLKConfig(RCC_SYSCLK_Div2);
    RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);  // switch to 32 MHz clock
    SystemCoreClockUpdate();                    // update SystemCoreClock var
    return(1);
}