Send on Sync message
Dependencies: BNO055_fusion RF24_fork mbed
Fork of F042_BNO055_toNRF24 by
Diff: config.h
- Revision:
- 0:5283bf22044b
- Child:
- 1:03c9c0e3fc70
diff -r 000000000000 -r 5283bf22044b config.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/config.h Mon Jan 16 16:51:56 2017 +0000 @@ -0,0 +1,116 @@ +#ifndef CONFIG_H +#define CONFIG_H + +#include "BNO055.h" + +//This header contains calibration data + +#define NodeID 2 + +#define NumOfTx 2 +#define SendDelay 33 // Send Delay in ms +#define calibration 0 // 0 -> normal 1-> mag cal 2->accel 3->gyro 4-> y,p,r 5-> refresh Rate + +//define MCU for bias and pinout +#define F042 +//#define L052 +//#define F103 + + + + + + + +//Macro for pinout + +#ifdef F042 + #define ledpin PA_10 + + #define nrf_CE PA_1 + #define nrf_CSN PA_4 + #define spi_SCK PA_5 + #define spi_MOSI PA_7 + #define spi_MISO PA_6 + #define nrf_irq PA_1 //TODO + + #define i2c_sda PF_0 + #define i2c_scl PF_1 + +#elif defined L052 + + + #define ledpin PA_8 + + #define nrf_CE PB_4 + #define nrf_CSN PB_3 + #define spi_SCK PA_5 + #define spi_MOSI PA_7 + #define spi_MISO PA_6 + #define nrf_irq PA_15 + + #define i2c_sda PB_7 + #define i2c_scl PB_6 + +#elif defined F103 + + #define ledpin PA_10 + + #define nrf_CE PA_9 + #define nrf_CSN PA_8 + #define spi_SCK PB_13 + #define spi_MOSI PB_15 + #define spi_MISO PB_14 + #define nrf_irq PA_12 + + #define i2c_sda PB_11 + #define i2c_scl PB_10 + +#endif + + + + + + +//Macro for Bias for MPU9250 + +#if NodeID == 0 //for calibration + float magbias[3] = {0, 0, 0}, magCalibration[3] = {0,0,0}; // Factory mag calibration and mag bias + float magscale[3] = {1, 1, 1}; + float gyroBias[3] = {0,0,0}, accelBias[3] = {0,0,0}; +#elif NodeID == 01 + float magbias[3] = {230.06, 200.52, -272.84}, magCalibration[3] = {0,0,0}; // Factory mag calibration and mag bias + float magscale[3] = {1.06, 1.013, 0.975}; + float gyroBias[3] = {0.764127,-0.92574,0.693003}, accelBias[3] = {0.081106,0.00221,0.000569}; // Bias corrections for gyro and accelerometer +#elif NodeID == 02 + float magbias[3] = {139.309, 268.018, 45.38}, magCalibration[3] = {0,0,0}; // Factory mag calibration and mag bias + float magscale[3] = {1.05367, 0.99, 0.963824}; + float gyroBias[3] = {2.868652,-3.94802,-16.9032}, accelBias[3] = {0.004451,-0.05648,0.034475}; +#elif NodeID == 03 + float magbias[3] = {-39.37,159.975,-156.101}, magCalibration[3] = {0,0,0}; // Factory mag calibration and mag bias + float magscale[3] = {1.01149, 1.0193, 0.970588}; + float gyroBias[3] = {-1.767136968,-1.293883734,-0.089169659}, accelBias[3] = {-0.036429195, -0.062139254, -0.007011032}; +#elif NodeID == 04 + float magbias[3] = {204.2954, 82.6538, -33.0917}, magCalibration[3] = {0,0,0}; // Factory mag calibration and mag bias + float magscale[3] = {1.0079681, 1.020161, 0.973077}; + float gyroBias[3] = {0.069701,0.426213,2.010493}, accelBias[3] = {-0.03679,-0.00328,-0.08524}; +#elif NodeID == 05 + float magbias[3] = {-66.19355, 193.05185, 61.052193}, magCalibration[3] = {0,0,0}; // Factory mag calibration and mag bias + float magscale[3] = {1.03841111, 0.989542111, 0.9742611}; + float gyroBias[3] = {0.158259,1.049968,0.993654}, accelBias[3] = {-0.02721,0.03663,0.011271}; +#elif NodeID == 06 + float magbias[3] = {-51.4838, 145.285, -191.774}, magCalibration[3] = {0,0,0}; // Factory mag calibration and mag bias + float magscale[3] = {1.049227, 0.99328, 0.971354}; + float gyroBias[3] = {-1.08982,0.222767,-0.49911}, accelBias[3] = {-0.01986,0.007156,-0.02797}; +#elif NodeID == 07 + float magbias[3] = {218.049286, 107.05262, -110.171631}, magCalibration[3] = {0,0,0}; // Factory mag calibration and mag bias + float magscale[3] = {1.042177, 0.966667, 1.030303}; + float gyroBias[3] = {-2.127218,0.4099984,-0.700637}, accelBias[3] = {-0.0041746,-0.017296524,-0.070773}; +#elif NodeID == 11 //racket + float magbias[3] = {263.908875, 440.263977, -235.16362}, magCalibration[3] = {0,0,0}; // Factory mag calibration and mag bias + float magscale[3] = {1.013227, 0.997396, 0.989664}; + float gyroBias[3] = {-1.12645,0.154036,0.416789}, accelBias[3] = {-0.00275,0.030735,-0.13714}; +#endif + +#endif \ No newline at end of file