File content as of revision 12:59ac7a4f3d9c:

/*
  SSeg.cpp - mbed library for 2/4/8 digit seven segment LED driver.
  Copyright 2013,2014,2015 by morecat_lab
 
  based on Dots library.
  Copyright 2010 arms22. All right reserved.
  
  This library is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 
*/

#ifndef SSEG_H
#define SSEG_H

#include "mbed.h"
#include <Timer.h>

#define NUM_PAT_0 0xfc
#define NUM_PAT_1 0x60
#define NUM_PAT_2 0xda
#define NUM_PAT_3 0xf2
#define NUM_PAT_4 0x66
#define NUM_PAT_5 0xb6
#define NUM_PAT_6 0xbe
#define NUM_PAT_7 0xe0
#define NUM_PAT_8 0xfe
#define NUM_PAT_9 0xf6
#define NUM_PAT_A 0xee
#define NUM_PAT_B 0x3e
#define NUM_PAT_C 0x9c
#define NUM_PAT_D 0x7a
#define NUM_PAT_E 0x9e
#define NUM_PAT_F 0x8e

/**
 * Seven segment LED driver library
 */
class Sseg
{
private:
    unsigned long _lastUpdateTime;
    int _updateInterval;
    DigitalOut *_segPins[8];  // changed to use array
    DigitalOut *_digPins[8];  // changed to use array
    char _buffer[8];
    int _numOfDigs;
    int _dig;       // support 4 or 8
    bool _zeroSupress;
    bool _kcommon;  // Cathode-common flag
    bool _sinkDriver; // invert segment drive, if true
    void initConv(void);
    Timer timer;
public:
    static const int numConv[16];
    /**
     * create an 2 digit seven segment driver
     *
     * @param PinName a Pin No for segment A
     * @param PinName b Pin No for segment B
     * @param PinName c Pin No for segment C
     * @param PinName d Pin No for segment D
     * @param PinName e Pin No for segment E
     * @param PinName f Pin No for segment F
     * @param PinName g Pin No for segment G
     * @param PinName dp Pin No for segment DP
     * @param PinName d1 Pin No for dight 1
     * @param PinName d2 Pin No for dight 2
     */
    Sseg(PinName a,PinName b,PinName c,PinName d,
         PinName e,PinName f,PinName g,PinName dp,
         PinName d1,PinName d2);

    /**
     * create an 4 digit seven segment driver
     *
     * @param PinName a Pin No for segment A
     * @param PinName b Pin No for segment B
     * @param PinName c Pin No for segment C
     * @param PinName d Pin No for segment D
     * @param PinName e Pin No for segment E
     * @param PinName f Pin No for segment F
     * @param PinName g Pin No for segment G
     * @param PinName dp Pin No for segment DP
     * @param PinName d1 Pin No for dight 1
     * @param PinName d2 Pin No for dight 2
     * @param PinName d3 Pin No for dight 3
     * @param PinName d4 Pin No for dight 4
     */
    Sseg(PinName a,PinName b,PinName c,PinName d,
         PinName e,PinName f,PinName g,PinName dp,
         PinName d1,PinName d2, PinName d3, PinName d4);

    /**
     * create an 8 digit seven segment driver
     *
     * @param PinName a Pin No for segment A
     * @param PinName b Pin No for segment B
     * @param PinName c Pin No for segment C
     * @param PinName d Pin No for segment D
     * @param PinName e Pin No for segment E
     * @param PinName f Pin No for segment F
     * @param PinName g Pin No for segment G
     * @param PinName dp Pin No for segment DP
     * @param PinName d1 Pin No for dight 1
     * @param PinName d2 Pin No for dight 2
     * @param PinName d3 Pin No for dight 3
     * @param PinName d4 Pin No for dight 4
     * @param PinName d5 Pin No for dight 5
     * @param PinName d6 Pin No for dight 6
     * @param PinName d7 Pin No for dight 7
     * @param PinName d8 Pin No for dight 8
     */
    Sseg(PinName a,PinName b,PinName c,PinName d,
         PinName e,PinName f,PinName g,PinName dp,
         PinName d1,PinName d2, PinName d3, PinName d4,
         PinName d5,PinName d6, PinName d7, PinName d8);
    
    /**
     * start driver
     */
    void begin(void);

    /**
     * use Kathode Common LED
     */
    void setKcommon(void);
    
    /**
     * use Anode Common LED (default)
     */
    void setAcommon(void);
    
    /**
     * sink driver
     */
    void setSinkDriver(void);    

    /**
     * get a charcter pattern from a number
     *
     * @param i number
     *
     * @returns bit pattern of number i
     *
     */
    char segCh(char i);

    /**
     * turn on DP 
     *
     * @param d dight
     *
     */
    void setDot(int d);

    /**
     * turn off DP 
     *
     * @param d dight
     *
     */
    void clearDot(int d);
    
    /**
     * write a number to LED 
     *
     * @param d number
     *
     */
    void writeNum(int n);

    /**
     * write a number to 2 dight LED 
     *
     * @param n number
     *
     */
    void writeNum2(int n);

    /**
     * write a number to 4 dight LED 
     *
     * @param n number
     *
     */
    void writeNum4(int n);

    /**
     * write a number to 8 dight LED 
     *
     * @param n number
     *
     */
    void writeNum8(int n);
    
    /**
     * write numbers to each dight of 2 dight LED 
     *
     * @param d1 digit 1 number
     * @param d2 digit 2 number
     *
     */
    void writeNum(char d1, char d2);

    /**
     * write numbers to each dight of 4 dight LED 
     *
     * @param d1 digit 1 number
     * @param d2 digit 2 number
     * @param d3 digit 3 number
     * @param d4 digit 4 number
     *
     */
    void writeNum(char d1, char d2, char d3, char d4);

    /**
     * write numbers to each dight of 8 dight LED 
     *
     * @param d1 digit 1 number
     * @param d2 digit 2 number
     * @param d3 digit 3 number
     * @param d4 digit 4 number
     * @param d5 digit 5 number
     * @param d6 digit 6 number
     * @param d7 digit 7 number
     * @param d8 digit 8 number
     *
     */
    void writeNum(char d1, char d2, char d3, char d4, char d5, char d6, char d7, char d8);

    /**
     * zero supress: tell driver not to display 0 in the left
     *
     */
    void supressZero();

    /**
     * control zero supress bit
     *
     * @param t, 1:supress on, 0:supress off
     *
     */
    void setZeroSupress(bool t);

    /**
     * write hex number to LED
     *
     * @param n number
     *
     */
    void writeHex(int n);

    /**
     * write hex number to LED
     *
     * @param n (long)number
     *
     */
    void writeHex(long n);

    /**
     * write patterns to each dight of 2 dight LED 
     *
     * @param d1 digit 1 pattern
     * @param d2 digit 2 pattern
     *
     */
    void writeRawData(char d1, char d2);
    
    /**
     * write patterns to each dight of 4 dight LED 
     *
     * @param d1 digit 1 pattern
     * @param d2 digit 2 pattern
     * @param d3 digit 3 pattern
     * @param d4 digit 4 pattern
     *
     */
    void writeRawData(char d1, char d2, char d3, char d4);

    /**
     * write patterns to each dight of 8 dight LED 
     *
     * @param d1 digit 1 pattern
     * @param d2 digit 2 pattern
     * @param d3 digit 3 pattern
     * @param d4 digit 4 pattern
     * @param d5 digit 5 pattern
     * @param d6 digit 6 pattern
     * @param d7 digit 7 pattern
     * @param d8 digit 8 pattern
     *
     */
    void writeRawData(char d1, char d2, char d3, char d4, char d5, char d6, char d7, char d8);

    void write(uint8_t x, uint8_t y, uint8_t value);

    /**
     * write patterns to a dight 
     *
     * @param d digit
     *
     * @param value pattern
     *
     */
    void write(uint8_t d, uint8_t value);
    void write(uint8_t y, const uint8_t values[], uint8_t size);

    /**
     * Clear LED buffer
     */
    void clear(void);
    
    /**
     * Turn off LED
     */
    void turnOff(void);

    /**
     * Turn on LED
     */
    void turnOn(void);

    /**
     * Update One dight of LED
     */
    void updateSeg(void);

    /**
     * Update LED (by internal clock)
     *
     * @returns sync = 1, if digit == 0
     *
     */
    bool update(void);

    /**
     * keep updating LED for specified period
     *
     * @param ms period (ms)
     *
     */
    void updateWithDelay(int ms);

    /**
     * Update LED Once with 1ms delay
     */
     void updateOnce(void);
};

#endif  // SSEG.h